zapret/docs/windows.eng.md

tpws

Using WSL (Windows subsystem for Linux) it's possible to run tpws in socks mode under rather new builds of windows 10 and windows server. Its not required to install any linux distributions as suggested in most articles. tpws is static binary. It doesn't need a distribution.

Install WSL : dism.exe /online /enable-feature /featurename:Microsoft-Windows-Subsystem-Linux /all

Copy binaries/x86_64/tpws_wsl.tgz to the target system. Run : wsl --import tpws "%USERPROFILE%\tpws" tpws_wsl.tgz

Run tpws : wsl -d tpws --exec /tpws --uid=1 --no-resolve --socks --bind-addr=127.0.0.1 --port=1080 <fooling_options>

Configure socks as 127.0.0.1:1080 in a browser or another program.

Cleanup : wsl --unregister tpws

Tested in windows 10 build 19041 (20.04).

--oob , --mss and --disorder do not work. RST detection in autohostlist scheme may not work. WSL may glitch with splice. --nosplice may be required.

winws

winws is nfqws version for windows. It's based on windivert. Most functions are working. Large ip filters (ipsets) are not possible. Forwarded traffic and connection sharing are not supported. Administrator rights are required.

Working with packet filter consists of two parts

1. In-kernel packet selection and passing selected packets to a packet filter in user mode. In *nix it's done by iptables, nftables, pf, ipfw.
2. User mode packet filter processes packets and does DPI bypass magic.

Windows does not have part 1. No iptables exist. That's why 3rd party packet redirector is used. It's called windivert. It works starting from windows 7. Kernel driver is signed but it may require to disable secure boot or update windows 7. Read below for windows 7 windivert signing info.

Task of iptables is done inside winws through windivert filters. Windivert has it's own filter language. winws can automate filter construction using simple ip version and port filter. Raw filters are also supported.

 --wf-iface=<int>[:<int>]                       ; numeric network interface and subinterface indexes
 --wf-l3=ipv4|ipv6                              ; L3 protocol filter. multiple comma separated values allowed.
 --wf-tcp=[~]port1[-port2]                      ; TCP port filter. ~ means negation. multiple comma separated values allowed.
 --wf-udp=[~]port1[-port2]                      ; UDP port filter. ~ means negation. multiple comma separated values allowed.
 --wf-raw=<filter>|@<filename>                  ; raw windivert filter string or filename
 --wf-save=<filename>                           ; save windivert filter string to a file and exit
 --ssid-filter=ssid1[,ssid2,ssid3,...]          ; enable winws only if any of specified wifi SSIDs connected
 --nlm-filter=net1[,net2,net3,...]              ; enable winws only if any of specified NLM network is connected. names and GUIDs are accepted.
 --nlm-list[=all]                               ; list Network List Manager (NLM) networks. connected only or all.                           

--wf-l3, --wf-tcp, --wf-udp can take multiple comma separated arguments.

Interface indexes can be discovered using this command : netsh int ip show int

If you can't find index this way use winws --debug to see index there. Subinterface index is almost always 0 and you can omit it.

Multiple winws processes are allowed. However, it's discouraged to intersect their filters.

--ssid-filter allows to enable winws only if specified wifi networks are connected. winws auto detects SSID appearance and disappearance. SSID names must be written in the same case as the system sees them. This option does not analyze routing and does not detect where traffic actually goes. If multiple connections are available, the only thing that triggers winws operation is wifi connection presence. That's why it's a good idea to add also --wf-iface filter to not break ethernet, for example.

--nlm-filter is like --ssid-filter but works with names or GUIDs from Network List Manager. NLM names are those you see in Control Panel "Network and Sharing Center". NLM networks are adapter independent. Usually MAC address of the default router is used to distinugish networks. NLM works with any type of adapters : ethernet, wifi, vpn and others. That's why NLM is more universal than ssid-filter.

Cygwin shell does not run binaries if their directory has it's own copy of cygwin1.dll. That's why exists separate standalone version in binaries/win64/zapret-tpws. Cygwin is required for blockcheck.sh support but winws itself can be run standalone without cygwin.

How to get windows 7 and winws compatible cygwin :

curl -O https://www.cygwin.com/setup-x86_64.exe
setup-x86_64.exe --allow-unsupported-windows --no-verify --site http://ctm.crouchingtigerhiddenfruitbat.org/pub/cygwin/circa/64bit/2024/01/30/231215

You must choose to install curl. To compile from sources install gcc-core,make,zlib-devel. Make from directory nfq using make cygwin.

winws requires cygwin1.dll, windivert.dll, windivert64.sys. You can take them from binaries/win64/zapret-winws.

32-bit x86 version can be build from 32-bit cygwin using make cygwin32.

There's no arm64 signed windivert driver and no cygwin. But it's possible to use unsigned driver version in test mode and user mode components with x64 emulation. x64 emulation requires windows 11 and not supported in windows 10.

windows 7 windivert signing

Requirements for windows driver signing have changed in 2021. Official free updates of windows 7 ended in 2020. After 2020 for the years paid updates were available (ESU). One of the updates from ESU enables signatures used in windivert 2.2.2-A. There are several options :

1. Take windivert64.sys and windivert.dll version 2.2.0-C or 2.2.0-D from here. Replace these 2 files in every location they are present. In zapret-win-bundle they are in zapret-winws и blockcheck/zapret/nfq folders. However this option still requires 10+ year old patch that enables SHA256 signatures.

2. Hack ESU

3. Use UpdatePack7R2 from simplix : https://blog.simplix.info If you are in Russia or Belarus temporary change region in Control Panel.

blockcheck

blockcheck.sh is written in posix shell and uses some standard posix utilites. Windows does not have them. To execute blockcheck.sh use cygwin command prompt run as administrator. It's not possible to use WSL. It's not the same as cygwin. First run once install_bin.sh then blockcheck.sh.

Backslashes in windows paths shoud be doubled. Or use cygwin path notation.

cd "C:\\Users\\vasya"
cd "C:/Users/vasya"
cd "/cygdrive/c/Users/vasya"

Cygwin is required only for blockcheck.sh. Standalone winws can be run without it.

auto start

To start winws with windows use windows task scheduler. There are task_*.cmd batch files in binaries/win64/zapret-winws. They create, remove, start and stop scheduled task winws1. They must be run as administrator.

Edit task_create.cmd and write your winws parameters to %WINWS1% variable. If you need multiple winws instances clone the code in all cmd files to support multiple tasks winws1,winws2,winws3,....

Tasks can also be controlled from GUI taskschd.msc.

Also you can use windows services the same way with service_*.cmd.

zapret-win-bundle

To make your life easier there's ready to use bundle with cygwin,blockcheck and winws.

• /zapret-winws - standalone version of winws for everyday use. does not require any other folders.
• /zapret-winws/_CMD_ADMIN.cmd - open cmd as administrator in the current folder
• /blockcheck/blockcheck.cmd - run blockcheck with logging to blockcheck/blockcheck.log
• /cygwin/cygwin.cmd - run cygwin shell as current user
• /cygwin/cygwin-admin.cmd - run cygwin shell as administrator

There're aliases in cygwin shell for winws,blockcheck,ip2net,mdig. No need to mess with paths. It's possible to send signals to winws using standard unix utilites : pidof,kill,killall,pgrep,pkill. Cygwin shares common process list per cygwin1.dll copy. If you run a winws from zapret-winws you won't be able to kill it because this folder contain its own copy of cygwin1.dll.

It's possible to use cygwin shell to make winws debug log. Use tee command like this :

winws --debug --wf-tcp=80,443 | tee winws.log
unix2dos winws.log

winws.log will be in cygwin/home/<username>. unix2dos helps with windows 7 notepad. It's not necessary in Windows 10 and later.

Pre-compiled 32-bit binaries can be downloaded here