drygdryg/zapret
1
0
Fork 0
mirror of https://github.com/bol-van/zapret.git synced 2024-11-26 20:20:53 +03:00
Code Issues Packages Projects Releases Wiki Activity

init scripts: multiple LAN/WAN interfaces

Browse Source
This commit is contained in:
bol-van 2021-09-28 22:43:43 +03:00
parent 9d982e96ca
commit 86e2802c4a
9 changed files with 239 additions and 125 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
config
View File

@ -50,9 +50,13 @@ TPWS_OPT="--hostspell=HOST --split-http-req=method --split-pos=3"
# openwrt only : donttouch,none,software,hardware
FLOWOFFLOAD=donttouch
# openwrt: specify networks to be treated as LAN. default is "lan"
# OPENWRT_LAN="lan lan2 lan3"
# for routers based on desktop linux and macos. has no effect in openwrt.
# CHOOSE LAN and optinally WAN NETWORK INTERFACES
# or leave them commented if its not router
# it's possible to specify multiple interfaces like this : IFACE_LAN="eth0 eth1 eth2"
#IFACE_LAN=eth0
#IFACE_WAN=eth1

5
docs/changes.txt
View File

@ -193,3 +193,8 @@ MacOS easy install
v39
nfqws: conntrack, wssize
v40
init scripts : IFACE_LAN, IFACE_WAN now accept multiple interfaces
init scripts : openwrt uses now OPENWRT_LAN parameter to override incoming interfaces for tpws

5
docs/readme.eng.txt
View File

@ -590,6 +590,10 @@ Newer FreeBSD versions support table only reloading : pfctl -Tl -f /etc/pf.conf
Set to "-" to disable reload.
LISTS_RELOAD="pfctl -f /etc/pf.conf"
In openwrt there's default network 'lan'. Only traffic coming from this network is redirected to tpws by default.
To override this behaviour set the following variable :
OPENWRT_LAN="lan lan2 lan3"
The following settings are not relevant for openwrt :
If your system works as a router, then you need to enter the names of the internal and external interfaces:
@ -597,6 +601,7 @@ IFACE_LAN = eth0
IFACE_WAN = eth1
IMPORTANT: configuring routing, masquerade, etc. not a zapret task.
Only modes that intercept transit traffic are enabled.
It's possible to specify multiple interfaces like this : IFACE_LAN="eth0 eth1 eth2"
The INIT_APPLY_FW=1 parameter enables the init script to independently apply iptables rules.
With other values or if the parameter is commented out, the rules will not be applied.

6
docs/readme.txt
View File

@ -1,4 +1,4 @@
zapret v.39
zapret v.40
English
-------
@ -829,6 +829,9 @@ GZIP_LISTS=1
#LISTS_RELOAD="pfctl -f /etc/pf.conf"
#LISTS_RELOAD=-
В openwrt существует сеть по умолчанию 'lan'. Только трафик с этой сети будет перенаправлен на tpws.
Но возможно задать другие сети или список сетей :
OPENWRT_LAN="lan lan2 lan3"
Следующие настройки не актуальны для openwrt :
@ -837,6 +840,7 @@ IFACE_LAN=eth0
IFACE_WAN=eth1
ВАЖНО : настройка маршрутизации , маскарада и т.д. не входит в задачу zapret.
Включаются только режимы, обеспечивающие перехват транзитного трафика.
Возможно определить несколько интерфейсов следующим образом : IFACE_LAN="eth0 eth1 eth2"
Параметр INIT_APPLY_FW=1 разрешает init скрипту самостоятельно применять правила iptables.
При иных значениях или если параметр закомментирован, правила применены не будут.

73
init.d/macos/functions
View File

@ -20,8 +20,6 @@ PF_ANCHOR_ZAPRET="$PF_ANCHOR_DIR/zapret"
PF_ANCHOR_ZAPRET_V4="$PF_ANCHOR_DIR/zapret-v4"
PF_ANCHOR_ZAPRET_V6="$PF_ANCHOR_DIR/zapret-v6"
[ -n "$IFACE_WAN" ] && OWAN=" on $IFACE_WAN"
CUSTOM_SCRIPT="$ZAPRET_BASE/init.d/macos/custom"
[ -f "$CUSTOM_SCRIPT" ] && . "$CUSTOM_SCRIPT"
@ -103,14 +101,13 @@ tpws_apply_socks_binds()
{
local o
[ "$DISABLE_IPV4" = "1" ] || {
o="--bind-addr=127.0.0.1"
[ -n "$IFACE_LAN" ] && o="$o --bind-iface4=$IFACE_LAN $TPWS_WAIT"
}
[ "$DISABLE_IPV6" = "1" ] || {
o="$o --bind-addr=::1"
[ -n "$IFACE_LAN" ] && o="$o --bind-iface6=$IFACE_LAN --bind-linklocal=unwanted $TPWS_WAIT_SOCKS6"
}
[ "$DISABLE_IPV4" = "1" ] || o="--bind-addr=127.0.0.1"
[ "$DISABLE_IPV6" = "1" ] || o="$o --bind-addr=::1"
for lan in $IFACE_LAN; do
[ "$DISABLE_IPV4" = "1" ] || o="$o --bind-iface4=$lan $TPWS_WAIT"
[ "$DISABLE_IPV6" = "1" ] || o="$o --bind-iface6=$lan --bind-linklocal=unwanted $TPWS_WAIT_SOCKS6"
done
eval $1="\"\$$1 $o\""
}
@ -121,11 +118,13 @@ wait_interface_ll()
}
wait_lan_ll()
{
[ "$DISABLE_IPV6" != "1" ] && [ -n "$IFACE_LAN" ] && {
wait_interface_ll $IFACE_LAN >&2 || {
echo "wait interface failed"
return 1
}
[ "$DISABLE_IPV6" != "1" ] && {
for lan in $IFACE_LAN; do
wait_interface_ll $lan >&2 || {
echo "wait interface failed on $lan"
return 1
}
done
}
return 0
}
@ -249,15 +248,22 @@ pf_anchor_zapret_v4_tpws()
{
# $1 - port
local port=$(pf_anchor_port_target)
[ -n "$IFACE_LAN" ] && {
local rule port=$(pf_anchor_port_target)
for lan in $IFACE_LAN; do
for t in $tbl; do
echo "rdr on $IFACE_LAN inet proto tcp from any to $t port $port -> 127.0.0.1 port $1"
echo "rdr on $lan inet proto tcp from any to $t port $port -> 127.0.0.1 port $1"
done
}
done
echo "rdr on lo0 inet proto tcp from !127.0.0.0/8 to any port $port -> 127.0.0.1 port $1"
for t in $tbl; do
echo "pass out$OWAN route-to (lo0 127.0.0.1) inet proto tcp from !127.0.0.0/8 to $t port $port user { >root }"
rule="route-to (lo0 127.0.0.1) inet proto tcp from !127.0.0.0/8 to $t port $port user { >root }"
if [ -n "$IFACE_WAN" ] ; then
for wan in $IFACE_WAN; do
echo "pass out on $wan $rule"
done
else
echo "pass out $rule"
fi
done
}
@ -282,22 +288,31 @@ pf_anchor_zapret_v6_tpws()
{
# $1 - port
local port=$(pf_anchor_port_target)
local LL_LAN rule port=$(pf_anchor_port_target)
# LAN link local is only for router
[ -n "$IFACE_LAN" ] && LL_LAN=$(get_ipv6_linklocal $IFACE_LAN)
[ -n "$LL_LAN" ] && {
for t in $tbl; do
echo "rdr on $IFACE_LAN inet6 proto tcp from any to $t port $port -> $LL_LAN port $1"
done
}
for lan in $IFACE_LAN; do
LL_LAN=$(get_ipv6_linklocal $lan)
[ -n "$LL_LAN" ] && {
for t in $tbl; do
echo "rdr on $lan inet6 proto tcp from any to $t port $port -> $LL_LAN port $1"
done
}
done
echo "rdr on lo0 inet6 proto tcp from !::1 to any port $port -> fe80::1 port $1"
for t in $tbl; do
echo "pass out$OWAN route-to (lo0 fe80::1) inet6 proto tcp from !::1 to $t port $port user { >root }"
rule="route-to (lo0 fe80::1) inet6 proto tcp from !::1 to $t port $port user { >root }"
if [ -n "$IFACE_WAN" ] ; then
for wan in $IFACE_WAN; do
echo "pass out on $wan $rule"
done
else
echo "pass out $rule"
fi
done
}
pf_anchor_zapret_v6()
{
local tbl port LL_LAN
local tbl port
[ "$DISABLE_IPV6" = "1" ] || {
case $MODE in

63
init.d/openwrt/functions
View File

@ -8,6 +8,7 @@
TPWS_USER=daemon
TPWS_LOCALHOST4=127.0.0.127
[ -n "$DESYNC_MARK" ] || DESYNC_MARK=0x40000000
[ -n "$OPENWRT_LAN" ] || OPENWRT_LAN=lan
# max wait time for the link local ipv6 on the LAN interface
LINKLOCAL_WAIT_SEC=5
@ -54,19 +55,19 @@ network_find_wan6_all()
ipt()
{
iptables -C "$@" 2>/dev/null || iptables -I "$@"
iptables -C "$@" >/dev/null 2>/dev/null || iptables -I "$@"
}
ipt_del()
{
iptables -C "$@" 2>/dev/null && iptables -D "$@"
iptables -C "$@" >/dev/null 2>/dev/null && iptables -D "$@"
}
ipt6()
{
ip6tables -C "$@" 2>/dev/null || ip6tables -I "$@"
ip6tables -C "$@" >/dev/null 2>/dev/null || ip6tables -I "$@"
}
ipt6_del()
{
ip6tables -C "$@" 2>/dev/null && ip6tables -D "$@"
ip6tables -C "$@" >/dev/null 2>/dev/null && ip6tables -D "$@"
}
# there's no route_localnet for ipv6
@ -100,38 +101,46 @@ get_ipv6_global()
dnat6_target()
{
# $1 - lan network name
# $2 - var to store target ip6
# get target ip address for DNAT. prefer link locals
# tpws should be as inaccessible from outside as possible
# link local address can appear not immediately after ifup
# DNAT6_TARGET=- means attempt was made but address was not found (to avoid multiple re-attempts)
local DNAT6_TARGET DVAR=DNAT6_TARGET_$1
DVAR=$(echo $DVAR | sed 's/[^a-zA-Z0-9_]/_/g')
eval DNAT6_TARGET="\$$DVAR"
[ -n "$2" ] && eval $2=''
[ -n "$DNAT6_TARGET" ] || {
# no reason to query if its down
network_is_up lan || return
network_is_up $1 || return
local DEVICE
network_get_device DEVICE lan
network_get_device DEVICE $1
local ct=0
while
DNAT6_TARGET=$(get_ipv6_linklocal $DEVICE)
[ -n "$DNAT6_TARGET" ] && break
[ "$ct" -ge "$LINKLOCAL_WAIT_SEC" ] && break
echo waiting for the link local for another $(($LINKLOCAL_WAIT_SEC - $ct)) seconds ...
echo $DEVICE: waiting for the link local for another $(($LINKLOCAL_WAIT_SEC - $ct)) seconds ...
ct=$(($ct+1))
sleep 1
do :; done
[ -n "$DNAT6_TARGET" ] || {
echo no link local. getting global
echo $DEVICE: no link local. getting global
DNAT6_TARGET=$(get_ipv6_global $DEVICE)
[ -n "$DNAT6_TARGET" ] || {
echo could not get any address
echo $DEVICE: could not get any address
DNAT6_TARGET=-
}
}
eval $DVAR="$DNAT6_TARGET"
}
[ -n "$2" ] && eval $2="$DNAT6_TARGET"
}
@ -229,16 +238,19 @@ fw_tpws4()
network_get_device DEVICE $ext_iface
ipt OUTPUT -t nat -o $DEVICE $IPT_OWNER -p tcp $1 $IPSET_EXCLUDE dst -j DNAT --to $TPWS_LOCALHOST4:$2
done
ipt prerouting_lan_rule -t nat -p tcp $1 $IPSET_EXCLUDE dst -j DNAT --to $TPWS_LOCALHOST4:$2
network_get_device DEVICE lan
[ -n "$DEVICE" ] && {
# allow localnet route only to special tpws IP
iptables -N input_lan_rule_zapret 2>/dev/null
ipt input_lan_rule_zapret -d 127.0.0.0/8 -j DROP
ipt input_lan_rule_zapret -d $TPWS_LOCALHOST4 -j RETURN
ipt input_lan_rule -j input_lan_rule_zapret
sysctl -qw net.ipv4.conf.$DEVICE.route_localnet=1
}
# allow localnet route only to special tpws IP
iptables -N input_rule_zapret 2>/dev/null
ipt input_rule_zapret -d 127.0.0.0/8 -j DROP
ipt input_rule_zapret -d $TPWS_LOCALHOST4 -j RETURN
for lan in $OPENWRT_LAN; do
network_get_device DEVICE $lan
[ -n "$DEVICE" ] || continue
ipt prerouting_rule -t nat -i $DEVICE -p tcp $1 $IPSET_EXCLUDE dst -j DNAT --to $TPWS_LOCALHOST4:$2
ipt input_rule -i $DEVICE -j input_rule_zapret
sysctl -qw net.ipv4.conf.$DEVICE.route_localnet=1
done
}
}
fw_tpws6()
@ -246,7 +258,7 @@ fw_tpws6()
# $1 - filter ipv6
# $2 - tpws port
local DEVICE wan_iface
local DEVICE wan_iface DNAT6
[ "$DISABLE_IPV6" = "1" ] || {
network_find_wan6_all wan_iface
@ -254,9 +266,12 @@ fw_tpws6()
network_get_device DEVICE $ext_iface
ipt6 OUTPUT -t nat -o $DEVICE $IPT_OWNER -p tcp $1 $IPSET_EXCLUDE6 dst -j DNAT --to [::1]:$2
done
network_get_device DEVICE lan
dnat6_target
[ "$DNAT6_TARGET" != "-" ] && ipt6 PREROUTING -t nat -i $DEVICE -p tcp $1 $IPSET_EXCLUDE6 dst -j DNAT --to [$DNAT6_TARGET]:$2
for lan in $OPENWRT_LAN; do
network_get_device DEVICE $lan
[ -n "$DEVICE" ] || continue
dnat6_target $lan DNAT6
[ "$DNAT6" != '-' ] && ipt6 PREROUTING -t nat -i $DEVICE -p tcp $1 $IPSET_EXCLUDE6 dst -j DNAT --to [$DNAT6]:$2
done
}
}
fw_tpws()

40
init.d/openwrt/zapret
View File

@ -59,11 +59,23 @@ run_tpws()
[ "$DISABLE_IPV4" = "1" ] || OPT="$OPT $TPWS_OPT_BASE4"
[ "$DISABLE_IPV6" = "1" ] || {
OPT="$OPT $TPWS_OPT_BASE6"
network_get_device DEVICE lan
[ -n "$DEVICE" ] && OPT="$OPT --bind-iface6=$DEVICE $TPWS_OPT_BASE6_PRE"
for lan in $OPENWRT_LAN; do
network_get_device DEVICE $lan
[ -n "$DEVICE" ] && OPT="$OPT --bind-iface6=$DEVICE $TPWS_OPT_BASE6_PRE"
done
}
run_daemon $1 "$TPWS" "$OPT $2"
}
run_tpws_socks()
{
[ "$DISABLE_IPV4" = "1" ] && [ "$DISABLE_IPV6" = "1" ] && return 0
local opt="$TPWS_OPT_BASE --socks"
tpws_apply_socks_binds opt
run_daemon $1 "$TPWS" "$opt $2"
}
stop_tpws()
{
stop_daemon $1 "$TPWS"
@ -80,16 +92,15 @@ tpws_apply_socks_binds()
{
local o
network_get_device DEVICE lan
[ "$DISABLE_IPV4" = "1" ] || {
o="--bind-addr=127.0.0.1"
[ -n "$DEVICE" ] && o="$o --bind-iface4=$DEVICE $TPWS_WAIT"
}
[ "$DISABLE_IPV6" = "1" ] || {
o="$o --bind-addr=::1"
[ -n "$DEVICE" ] && o="$o --bind-iface6=$DEVICE --bind-linklocal=unwanted $TPWS_WAIT_SOCKS6"
}
[ "$DISABLE_IPV4" = "1" ] || o="--bind-addr=127.0.0.1"
[ "$DISABLE_IPV6" = "1" ] || o="$o --bind-addr=::1"
for lan in $OPENWRT_LAN; do
network_get_device DEVICE $lan
[ -n "$DEVICE" ] || continue
[ "$DISABLE_IPV4" = "1" ] || o="$o --bind-iface4=$DEVICE $TPWS_WAIT"
[ "$DISABLE_IPV6" = "1" ] || o="$o --bind-iface6=$DEVICE --bind-linklocal=unwanted $TPWS_WAIT_SOCKS6"
done
eval $1="\"\$$1 $o\""
}
@ -104,10 +115,9 @@ start_service() {
run_tpws 1 "$opt"
;;
tpws-socks)
opt="--port=$TPPORT $TPWS_OPT_BASE --socks $TPWS_OPT"
tpws_apply_socks_binds opt
opt="--port=$TPPORT $TPWS_OPT"
filter_apply_hostlist_target opt
run_daemon 1 "$TPWS" "$opt"
run_tpws_socks 1 "$opt"
;;
nfqws)
opt="--qnum=$QNUM $NFQWS_OPT_BASE $NFQWS_OPT_DESYNC_HTTP"

166
init.d/sysv/functions
View File

@ -31,11 +31,6 @@ TPWS_WAIT_SOCKS6="$TPWS_WAIT --bind-wait-ip-linklocal=30"
# first wait for lan to ifup, then wait for bind-wait-ip-linklocal seconds for link local address and bind-wait-ip for any ipv6 as the worst case
TPWS_OPT_BASE6_PRE="--bind-linklocal=prefer $TPWS_WAIT --bind-wait-ip-linklocal=3"
[ -n "$IFACE_WAN" ] && IPT_OWAN="-o $IFACE_WAN"
[ -n "$IFACE_WAN" ] && IPT_IWAN="-i $IFACE_WAN"
[ -n "$IFACE_LAN" ] && IPT_ILAN="-i $IFACE_LAN"
[ -n "$DESYNC_MARK" ] || DESYNC_MARK=0x40000000
# max wait time for the link local ipv6 on the LAN interface
@ -72,11 +67,11 @@ on_off_function()
ipt()
{
iptables -C "$@" 2>/dev/null || iptables -I "$@"
iptables -C "$@" >/dev/null 2>/dev/null || iptables -I "$@"
}
ipt_del()
{
iptables -C "$@" 2>/dev/null && iptables -D "$@"
iptables -C "$@" >/dev/null 2>/dev/null && iptables -D "$@"
}
ipt_add_del()
{
@ -84,11 +79,11 @@ ipt_add_del()
}
ipt6()
{
ip6tables -C "$@" 2>/dev/null || ip6tables -I "$@"
ip6tables -C "$@" >/dev/null 2>/dev/null || ip6tables -I "$@"
}
ipt6_del()
{
ip6tables -C "$@" 2>/dev/null && ip6tables -D "$@"
ip6tables -C "$@" >/dev/null 2>/dev/null && ip6tables -D "$@"
}
ipt6_add_del()
{
@ -141,31 +136,39 @@ wait_ifup()
dnat6_target()
{
# $1 - lan network name
# $2 - var to store target ip6
# get target ip address for DNAT. prefer link locals
# tpws should be as inaccessible from outside as possible
# link local address can appear not immediately after ifup
# DNAT6_TARGET=- means attempt was made but address was not found (to avoid multiple re-attempts)
local DNAT6_TARGET DVAR=DNAT6_TARGET_$1
DVAR=$(echo $DVAR | sed 's/[^a-zA-Z0-9_]/_/g')
eval DNAT6_TARGET="\$$DVAR"
[ -n "$2" ] && eval $2=''
[ -n "$DNAT6_TARGET" ] || {
local ct=0
while
DNAT6_TARGET=$(get_ipv6_linklocal $IFACE_LAN)
DNAT6_TARGET=$(get_ipv6_linklocal $1)
[ -n "$DNAT6_TARGET" ] && break
[ "$ct" -ge "$LINKLOCAL_WAIT_SEC" ] && break
echo waiting for the link local for another $(($LINKLOCAL_WAIT_SEC - $ct)) seconds ...
echo $1: waiting for the link local for another $(($LINKLOCAL_WAIT_SEC - $ct)) seconds ...
ct=$(($ct+1))
sleep 1
do :; done
[ -n "$DNAT6_TARGET" ] || {
echo no link local. getting global
DNAT6_TARGET=$(get_ipv6_global $IFACE_LAN)
echo $1: no link local. getting global
DNAT6_TARGET=$(get_ipv6_global $1)
[ -n "$DNAT6_TARGET" ] || {
echo could not get any address
echo $1: could not get any address
DNAT6_TARGET=-
}
}
eval $DVAR="$DNAT6_TARGET"
}
[ -n "$2" ] && eval $2="$DNAT6_TARGET"
}
prepare_tpws_fw4()
@ -173,26 +176,25 @@ prepare_tpws_fw4()
# otherwise linux kernel will treat 127.0.0.0/8 as "martian" ip and refuse routing to it
# NOTE : kernels <3.6 do not have this feature. consider upgrading or change DNAT to REDIRECT and do not bind to 127.0.0.0/8
[ -n "$IFACE_LAN" ] && {
iptables -C INPUT -i $IFACE_LAN -j input_lan_rule_zapret 2>/dev/null || {
# allow localnet route only to special tpws IP
iptables -N input_lan_rule_zapret 2>/dev/null
iptables -F input_lan_rule_zapret
iptables -A input_lan_rule_zapret -d $TPWS_LOCALHOST4 -j RETURN
iptables -A input_lan_rule_zapret -d 127.0.0.0/8 -j DROP
iptables -I INPUT -i $IFACE_LAN -j input_lan_rule_zapret
}
sysctl -qw net.ipv4.conf.$IFACE_LAN.route_localnet=1
iptables -N input_rule_zapret 2>/dev/null
iptables -F input_rule_zapret
iptables -A input_rule_zapret -d $TPWS_LOCALHOST4 -j RETURN
iptables -A input_rule_zapret -d 127.0.0.0/8 -j DROP
for lan in $IFACE_LAN ; do
ipt INPUT -i $lan -j input_rule_zapret
sysctl -qw net.ipv4.conf.$lan.route_localnet=1
done
}
}
unprepare_tpws_fw4()
{
[ -n "$IFACE_LAN" ] && {
iptables -C INPUT -i $IFACE_LAN -j input_lan_rule_zapret 2>/dev/null && {
sysctl -qw net.ipv4.conf.$IFACE_LAN.route_localnet=0
iptables -D INPUT -i $IFACE_LAN -j input_lan_rule_zapret
iptables -F input_lan_rule_zapret
iptables -X input_lan_rule_zapret
}
for lan in $IFACE_LAN ; do
ipt_del INPUT -i $lan -j input_rule_zapret
sysctl -qw net.ipv4.conf.$lan.route_localnet=0
done
iptables -F input_rule_zapret 2>/dev/null
iptables -X input_rule_zapret 2>/dev/null
}
}
unprepare_tpws_fw()
@ -218,10 +220,16 @@ fw_tpws4()
[ "$DISABLE_IPV4" = "1" ] || {
[ "$1" = 1 ] && prepare_tpws_fw4
print_op $1 "$2" "tpws (port $3)"
[ -n "$IFACE_LAN" ] && {
ipt_add_del $1 PREROUTING -t nat $IPT_ILAN -p tcp $2 $IPSET_EXCLUDE dst -j DNAT --to $TPWS_LOCALHOST4:$3
}
ipt_add_del $1 OUTPUT -t nat $IPT_OWAN -m owner ! --uid-owner $WS_USER -p tcp $2 $IPSET_EXCLUDE dst -j DNAT --to $TPWS_LOCALHOST4:$3
for lan in $IFACE_LAN ; do
ipt_add_del $1 PREROUTING -t nat -i $lan -p tcp $2 $IPSET_EXCLUDE dst -j DNAT --to $TPWS_LOCALHOST4:$3
done
if [ -n "$IFACE_WAN" ]; then
for wan in $IFACE_WAN; do
ipt_add_del $1 OUTPUT -t nat -o $wan -m owner ! --uid-owner $WS_USER -p tcp $2 $IPSET_EXCLUDE dst -j DNAT --to $TPWS_LOCALHOST4:$3
done
else
ipt_add_del $1 OUTPUT -t nat -m owner ! --uid-owner $WS_USER -p tcp $2 $IPSET_EXCLUDE dst -j DNAT --to $TPWS_LOCALHOST4:$3
fi
}
}
fw_tpws6()
@ -231,11 +239,18 @@ fw_tpws6()
# $3 - tpws port
[ "$DISABLE_IPV6" = "1" ] || {
print_op $1 "$2" "tpws (port $3)" 6
[ -n "$IFACE_LAN" ] && {
dnat6_target
[ "$DNAT6_TARGET" != "-" ] && ipt6_add_del $1 PREROUTING -t nat $IPT_ILAN -p tcp $2 $IPSET_EXCLUDE6 dst -j DNAT --to [$DNAT6_TARGET]:$3
}
ipt6_add_del $1 OUTPUT -t nat $IPT_OWAN -m owner ! --uid-owner $WS_USER -p tcp $2 $IPSET_EXCLUDE6 dst -j DNAT --to [::1]:$3
local DNAT6
for lan in $IFACE_LAN ; do
dnat6_target $lan DNAT6
[ "$DNAT6" != "-" ] && ipt6_add_del $1 PREROUTING -t nat -i $lan -p tcp $2 $IPSET_EXCLUDE6 dst -j DNAT --to [$DNAT6]:$3
done
if [ -n "$IFACE_WAN" ]; then
for wan in $IFACE_WAN; do
ipt6_add_del $1 OUTPUT -t nat -o $wan -m owner ! --uid-owner $WS_USER -p tcp $2 $IPSET_EXCLUDE6 dst -j DNAT --to [::1]:$3
done
else
ipt6_add_del $1 OUTPUT -t nat -m owner ! --uid-owner $WS_USER -p tcp $2 $IPSET_EXCLUDE6 dst -j DNAT --to [::1]:$3
fi
}
}
fw_tpws()
@ -256,7 +271,13 @@ fw_nfqws_pre4()
# $3 - queue number
[ "$DISABLE_IPV4" = "1" ] || {
print_op $1 "$2" "nfqws prerouting (qnum $3)"
ipt_add_del $1 PREROUTING -t mangle $IPT_IWAN -p tcp $2 $IPSET_EXCLUDE src -j NFQUEUE --queue-num $3 --queue-bypass
if [ -n "$IFACE_WAN" ]; then
for wan in $IFACE_WAN; do
ipt_add_del $1 PREROUTING -t mangle -i $wan -p tcp $2 $IPSET_EXCLUDE src -j NFQUEUE --queue-num $3 --queue-bypass
done
else
ipt_add_del $1 PREROUTING -t mangle -p tcp $2 $IPSET_EXCLUDE src -j NFQUEUE --queue-num $3 --queue-bypass
fi
}
}
fw_nfqws_pre6()
@ -266,7 +287,13 @@ fw_nfqws_pre6()
# $3 - queue number
[ "$DISABLE_IPV6" = "1" ] || {
print_op $1 "$2" "nfqws prerouting (qnum $3)" 6
ipt6_add_del $1 PREROUTING -t mangle $IPT_IWAN -p tcp $2 $IPSET_EXCLUDE6 src -j NFQUEUE --queue-num $3 --queue-bypass
if [ -n "$IFACE_WAN" ]; then
for wan in $IFACE_WAN; do
ipt6_add_del $1 PREROUTING -t mangle -i $wan -p tcp $2 $IPSET_EXCLUDE6 src -j NFQUEUE --queue-num $3 --queue-bypass
done
else
ipt6_add_del $1 PREROUTING -t mangle -p tcp $2 $IPSET_EXCLUDE6 src -j NFQUEUE --queue-num $3 --queue-bypass
fi
}
}
fw_nfqws_pre()
@ -285,7 +312,13 @@ fw_nfqws_post4()
# $3 - queue number
[ "$DISABLE_IPV4" = "1" ] || {
print_op $1 "$2" "nfqws postrouting (qnum $3)"
ipt_add_del $1 POSTROUTING -t mangle $IPT_OWAN -p tcp $2 $IPSET_EXCLUDE dst -j NFQUEUE --queue-num $3 --queue-bypass
if [ -n "$IFACE_WAN" ]; then
for wan in $IFACE_WAN; do
ipt_add_del $1 POSTROUTING -t mangle -o $wan -p tcp $2 $IPSET_EXCLUDE dst -j NFQUEUE --queue-num $3 --queue-bypass
done
else
ipt_add_del $1 POSTROUTING -t mangle -p tcp $2 $IPSET_EXCLUDE dst -j NFQUEUE --queue-num $3 --queue-bypass
fi
}
}
fw_nfqws_post6()
@ -295,7 +328,13 @@ fw_nfqws_post6()
# $3 - queue number
[ "$DISABLE_IPV6" = "1" ] || {
print_op $1 "$2" "nfqws postrouting (qnum $3)" 6
ipt6_add_del $1 POSTROUTING -t mangle $IPT_OWAN -p tcp $2 $IPSET_EXCLUDE6 dst -j NFQUEUE --queue-num $3 --queue-bypass
if [ -n "$IFACE_WAN" ]; then
for wan in $IFACE_WAN; do
ipt6_add_del $1 POSTROUTING -t mangle -o $wan -p tcp $2 $IPSET_EXCLUDE6 dst -j NFQUEUE --queue-num $3 --queue-bypass
done
else
ipt6_add_del $1 POSTROUTING -t mangle -p tcp $2 $IPSET_EXCLUDE6 dst -j NFQUEUE --queue-num $3 --queue-bypass
fi
}
}
fw_nfqws_post()
@ -385,11 +424,30 @@ do_tpws()
[ "$DISABLE_IPV4" = "1" ] || OPT="$OPT $TPWS_OPT_BASE4"
[ "$DISABLE_IPV6" = "1" ] || {
OPT="$OPT $TPWS_OPT_BASE6"
[ -n "$IFACE_LAN" ] && OPT="$OPT --bind-iface6=$IFACE_LAN $TPWS_OPT_BASE6_PRE"
for lan in $IFACE_LAN; do
OPT="$OPT --bind-iface6=$lan $TPWS_OPT_BASE6_PRE"
done
}
do_daemon $1 $2 "$TPWS" "$OPT $3"
}
do_tpws_socks()
{
# $1 : 1 - run, 0 - stop
# $2 : daemon number
# $3 : daemon args
[ "$1" = "1" ] && prepare_user
[ "$DISABLE_IPV4" = "1" ] && [ "$DISABLE_IPV6" = "1" ] && return 0
local opt="$TPWS_OPT_BASE --socks"
tpws_apply_socks_binds opt
do_daemon $1 $2 "$TPWS" "$opt $3"
}
do_nfqws()
{
# $1 : 1 - run, 0 - stop
@ -434,14 +492,13 @@ tpws_apply_socks_binds()
{
local o
[ "$DISABLE_IPV4" = "1" ] || {
o="--bind-addr=127.0.0.1"
[ -n "$IFACE_LAN" ] && o="$o --bind-iface4=$IFACE_LAN $TPWS_WAIT"
}
[ "$DISABLE_IPV6" = "1" ] || {
o="$o --bind-addr=::1"
[ -n "$IFACE_LAN" ] && o="$o --bind-iface6=$IFACE_LAN --bind-linklocal=unwanted $TPWS_WAIT_SOCKS6"
}
[ "$DISABLE_IPV4" = "1" ] || o="--bind-addr=127.0.0.1"
[ "$DISABLE_IPV6" = "1" ] || o="$o --bind-addr=::1"
for lan in $IFACE_LAN; do
[ "$DISABLE_IPV4" = "1" ] || o="$o --bind-iface4=$lan $TPWS_WAIT"
[ "$DISABLE_IPV6" = "1" ] || o="$o --bind-iface6=$lan --bind-linklocal=unwanted $TPWS_WAIT_SOCKS6"
done
eval $1="\"\$$1 $o\""
}
@ -535,10 +592,9 @@ zapret_do_daemons()
do_tpws $1 1 "$opt"
;;
tpws-socks)
opt="--port=$TPPORT $TPWS_OPT_BASE --socks $TPWS_OPT"
tpws_apply_socks_binds opt
opt="--port=$TPPORT $TPWS_OPT"
filter_apply_hostlist_target opt
do_daemon $1 1 "$TPWS" "$opt"
do_tpws_socks $1 1 "$opt"
;;
nfqws)
opt="--qnum=$QNUM $NFQWS_OPT_DESYNC_HTTP"

2
install_easy.sh
View File

@ -257,7 +257,7 @@ ask_list()
[ -n "$m" ] && M=$(echo $2 | cut -d ' ' -f$m 2>/dev/null)
[ -z "$M" ] && M="$M_DEFAULT"
echo selected : $M
eval $1="$M"
eval $1="\"$M\""
[ "$M" != "$M_OLD" ]
}