Release calc 2.12.7.1

Corrected CHANGES notes that were mixed up for TAB, VT, CR & NL. The code in 2.12.7.0 is correct. The CHANGE notes should have read: The following is a partial list of escape sequences recognized in strings and in printf formats: \a audible bell byte 0x07 in ASCII encoding \b backspace byte 0x08 in ASCII encoding \f form feed byte 0x0c in ASCII encoding \n newline byte 0x0a in ASCII encoding \r return byte 0x0d in ASCII encoding \t tab byte 0x09 in ASCII encoding \v vertical tab byte 0x0b in ASCII encoding Sorry!
Corrected CHANGES notes
2025-08-19 01:13:27 +03:00 · 2018-11-05 08:02:09 -08:00 · 2018-11-05 07:33:40 -08:00 · 2018-11-04 17:11:31 -08:00 · 2018-11-04 17:10:46 -08:00 · 2018-11-04 17:08:11 -08:00
28 changed files with 721 additions and 209 deletions
--- a/102
+++ b/102
@@ -1,4 +1,104 @@
-The following are the changes from calc version 2.12.6.6 to date:
+The following are the changes from calc version 2.12.7.1 to date:
+
+    Corrected CHANGES notes that were mixed up for TAB, VT, CR &
+    NL.  The code in 2.12.7.0 is correct.  The CHANGE notes should
+    have read:
+
+    The following is a partial list of escape sequences recognized
+    in strings and in printf formats:
+
+	\a	audible bell	byte 0x07 in ASCII encoding
+	\b	backspace	byte 0x08 in ASCII encoding
+	\f	form feed	byte 0x0c in ASCII encoding
+	\n	newline		byte 0x0a in ASCII encoding
+	\r	return		byte 0x0d in ASCII encoding
+	\t	tab		byte 0x09 in ASCII encoding
+	\v	vertical tab	byte 0x0b in ASCII encoding
+
+    Sorry!
+
+
+The following are the changes from calc version 2.12.6.10: to 2.12.7.0:
+
+    Added a patch to replaces the manual search for include files
+    in $(INCDIR) in the have_*.h targets with compiler invocations.
+    Thanks goes to Helmut Grohne (helmut at subdivi dot de) who
+    implemented the patch and posted it to the Debian bug tracker
+    and Martin Buck (m at rtin-buck dor de) for forwarding it to us.
+
+    The check_include make rule was fixed to not assume /usr/include.
+
+    The qprintnum() function now takes outdigits as a 3rd argument.
+    Most of the time, this 3rd argument is just conf->outdigits.
+    But when it comes to the experimental '%g', this value can
+    change.  This avoids having to modify conf->outdigits.
+
+    Fixed a problem where gcc complains about E_FUNC not being defined
+    for Linux systems as reported by Martin Buck (m at rtin-buck dor de).
+
+    Updated the help files help/config, help/display, help/epsilon,
+    help/fprint, help/printf, and help/strprintf to give more
+    examples of how display digits and epsilon precision interact
+    with displaying values.
+
+    Added more information about %g in the help file help/printf.
+
+    The '\a' is now recognized in a printf format string as the
+    single byte audible bell character (byte 0x07 in ASCII encoding).
+
+    The following is a partial list of escape sequences recognized
+    in strings and in printf formats:
+
+	\a	audible bell	byte 0x07 in ASCII encoding
+	\b	backspace	byte 0x08 in ASCII encoding
+	\f	form feed	byte 0x0c in ASCII encoding
+	\n	newline		byte 0x0a in ASCII encoding
+	\r	return		byte 0x0d in ASCII encoding
+	\t	tab		byte 0x09 in ASCII encoding
+	\v	vertical tab	byte 0x0b in ASCII encoding
+
+
+The following are the changes from calc version 2.12.6.9 to 2.12.6.9:
+
+    Fixed a number of core dump bugs related to the calculation of
+    tan(), cot(), sec(), csc(), tanh(), coth(), sech(), and csch(),
+    asin(), acos(), asinh(), acosh(), where when a call to an
+    underlying function produced an invalid value.  Thanks goes to
+    github user wuxiuheng for reporting this problem.
+
+    A number of trigonometric and hyperbolic functions that incorrectly
+    returned E_LOGINF, now return a new error code that is more
+    specific to the trigonometric or hyperbolic function.  The
+    following is a list of these new error codes: E_TAN3 E_TAN4
+    E_COT3 E_COT4 E_SEC3 E_CSC3 E_TANH3 E_TANH4 E_COTH3 E_COTH4
+    E_SECH3 E_CSCH3 E_ASIN3 E_ACOS3 E_ASINH3 E_ACOSH3 E_ATAN3 E_ACOT3
+    E_ASEC3 E_ACSC3 E_ATANH3 E_ACOTH3 E_ASECH3 E_ACSCH3.
+
+    Added regression tests 3729 thru 3732 to test E_TAN3, E_COT3,
+    E_SEC3 and E_CSC3 respectively.
+
+    Added experimential %g printf (and strprintf) format implementation
+    based on pull request from github user 10110111.
+
+    Made exterimental changes to macOS builds to not require use of
+    /usr/include.  The INCDIR for macOS uses:
+
+	INCDIR= $(shell xcrun --show-sdk-path --sdk macosx)/usr/include
+
+    to determine the upper path of the /usr/include directory for macOS.
+    In some rare cases, the Darwin target seems to not automatically detected.
+    If you are running under macOS, and that happens, you can force
+    the target to be Darwin:
+
+	# for macOS users only, force the target to be darwin
+	#
+	make target=Darwin clobber
+	make target=Darwin all
+	make target=Darwin chk
+	make target=Darwin install
+
+
+The following are the changes from calc version 2.12.6.6 to 2.12.6.8:

    For historical purposes, in lucas.cal, gen_v1(1, n) always returns 4.

--- a/HOWTO.INSTALL
+++ b/HOWTO.INSTALL
@@ -32,6 +32,16 @@ Installing calc from the bzip2-ed tarball in 4 easy steps:
 	targets, the default make is sufficent.  On FreeBSD for example,
 	one must use gmake instead of make.

+	Some report that under macOS, one has to declare the target
+	to be darwin.  So for macOS, one might have to do:
+
+	    # for macOS users only, force the target to be darwin
+	    #
+	    make target=Darwin clobber
+	    make target=Darwin all
+	    make target=Darwin chk
+	    make target=Darwin install
+
 	If your target system does not have GNU Make (or equivalent), then
 	you should try using the Makefile.simple and custom/Makefile.simple
 	files:
--- a/27
+++ b/27
@@ -207,30 +207,9 @@ all: fix_version check_include
 	${V} echo '=-=-=-=-= private Makefile $@ rule end =-=-=-=-='

 check_include:
-	$(Q) if [ ! -d /usr/include ]; then \
-	    echo "ERROR: critical directory missing: /usr/include" 1>&2; \
-	    echo "Without this critical directory, we cannot compile." 1>&2; \
-	    echo 1>&2; \
-	    echo "Perhaps your system isn't setup to compile C source?" 1>&2; \
-	    echo "For example, Apple OS X / darwin requres that XCode" 1>&2; \
-	    echo "must be installed and that you run the command:" 1>&2; \
-	    echo 1>&2; \
-	    echo "    xcode-select --install" 1>&2; \
-	    echo 1>&2; \
-	    exit 1; \
-	fi
-	$(Q) if [ ! -f /usr/include/stdio.h ]; then \
-	    echo "ERROR: critical include files are missing" 1>&2; \
-	    echo "Without this critical directory, we cannot compile." 1>&2; \
-	    echo 1>&2; \
-	    echo "Perhaps your system isn't setup to compile C source?" 1>&2; \
-	    echo "For example, Apple OS X / darwin requres that XCode" 1>&2; \
-	    echo "must be installed and that you run the command:" 1>&2; \
-	    echo 1>&2; \
-	    echo "    xcode-select --install" 1>&2; \
-	    echo 1>&2; \
-	    exit 1; \
-	fi
+	${V} echo '=-=-=-=-= private Makefile $@ rule start =-=-=-=-='
+	${Q} ${MAKE} ${XARG} -f ${MAKE_FILE} $@ ${XVAR}
+	${V} echo '=-=-=-=-= private Makefile $@ rule end =-=-=-=-='

 calc-dynamic-only:
 	${V} echo '=-=-=-=-= private Makefile $@ rule start =-=-=-=-='
--- a/Makefile.ship
+++ b/Makefile.ship
@@ -575,7 +575,7 @@ HAVE_UNUSED=
 ifeq ($(target),Darwin)

 # default INCDIR for macOS
-INCDIR= /usr/local/include
+INCDIR= $(shell xcrun --show-sdk-path --sdk macosx)/usr/include

 else
 #endif	/* end of skip for non-Gnu makefiles */
@@ -1054,7 +1054,7 @@ EXT=

 # The default calc versions
 #
-VERSION= 2.12.6.8
+VERSION= 2.12.7.1

 # Names of shared libraries with versions
 #
@@ -2179,25 +2179,15 @@ TARGETS= ${EARLY_TARGETS} ${BLD_TYPE} ${LATE_TARGETS}
 all: check_include ${BLD_TYPE} CHANGES

 check_include:
-	$(Q) if [ ! -d /usr/include ]; then \
-	    echo "ERROR: critical directory missing: /usr/include" 1>&2; \
-	    echo "Without this critical directory, we cannot compile." 1>&2; \
-	    echo 1>&2; \
+	$(Q) if ! echo '#include <stdio.h>' | ${CC} -E - >/dev/null 2>&1; then \
+	    echo "ERROR: Missing critical <stdio.h> include file." 1>&2; \
+	    echo "Without critical include files, we cannot compile." 1>&2; \
 	    echo "Perhaps your system isn't setup to compile C source?" 1>&2; \
-	    echo "For example, Apple OS X / darwin requres that XCode" 1>&2; \
-	    echo "must be installed and that you run the command:" 1>&2; \
 	    echo 1>&2; \
-	    echo "    xcode-select --install" 1>&2; \
+	    echo "For example, Apple macOS / Darwin requres that XCode" 1>&2; \
+	    echo "must be installed." 1>&2; \
 	    echo 1>&2; \
-	    exit 1; \
-	fi
-	$(Q) if [ ! -f /usr/include/stdio.h ]; then \
-	    echo "ERROR: critical include files are missing" 1>&2; \
-	    echo "Without this critical directory, we cannot compile." 1>&2; \
-	    echo 1>&2; \
-	    echo "Perhaps your system isn't setup to compile C source?" 1>&2; \
-	    echo "For example, Apple OS X / darwin requres that XCode" 1>&2; \
-	    echo "must be installed and that you run the command:" 1>&2; \
+	    echo "Also macOS users might later to run this command:" 1>&2; \
 	    echo 1>&2; \
 	    echo "    xcode-select --install" 1>&2; \
 	    echo 1>&2; \
@@ -2477,22 +2467,15 @@ endian_calc.h: endian${EXT} ${MAKE_FILE}
 	${Q} echo '' >> endian_calc.h
 	${Q} echo '/* what byte order are we? */' >> endian_calc.h
 	-${Q} if [ X"${CALC_BYTE_ORDER}" = X ]; then \
-	    if [ -f ${INCDIR}/endian.h ]; then \
+	    if echo '#include <endian.h>' | ${CC} -E - >/dev/null 2>&1; then \
 		echo '#include <endian.h>' >> endian_calc.h; \
 		echo '#define CALC_BYTE_ORDER BYTE_ORDER' >> endian_calc.h; \
-	    elif [ -f ${INCDIR}/machine/endian.h ]; then \
+	    elif echo '#include <machine/endian.h>' | \
+		 ${CC} -E - >/dev/null 2>&1; then \
 		echo '#include <machine/endian.h>' >> endian_calc.h; \
 		echo '#define CALC_BYTE_ORDER BYTE_ORDER' >> endian_calc.h; \
-	    elif [ -f ${INCDIR}/sys/endian.h ]; then \
-		echo '#include <sys/endian.h>' >> endian_calc.h; \
-		echo '#define CALC_BYTE_ORDER BYTE_ORDER' >> endian_calc.h; \
-	    elif [ -f /usr/include/endian.h ]; then \
-		echo '#include <endian.h>' >> endian_calc.h; \
-		echo '#define CALC_BYTE_ORDER BYTE_ORDER' >> endian_calc.h; \
-	    elif [ -f /usr/include/machine/endian.h ]; then \
-		echo '#include <machine/endian.h>' >> endian_calc.h; \
-		echo '#define CALC_BYTE_ORDER BYTE_ORDER' >> endian_calc.h; \
-	    elif [ -f /usr/include/sys/endian.h ]; then \
+	    elif echo '#include <sys/endian.h>' | \
+		 ${CC} -E- >/dev/null 2>&1; then \
 		echo '#include <sys/endian.h>' >> endian_calc.h; \
 		echo '#define CALC_BYTE_ORDER BYTE_ORDER' >> endian_calc.h; \
 	    else \
@@ -2559,9 +2542,7 @@ have_times.h: ${MAKE_FILE}
 	    echo '#define HAVE_TIMES_H	/* yes */' >> have_times.h; \
 	elif [ X"${HAVE_TIMES_H}" = X"NO" ]; then \
 	    echo '#undef HAVE_TIMES_H  /* no */' >> have_times.h; \
-	elif [ -f ${INCDIR}/times.h ]; then \
-	    echo '#define HAVE_TIMES_H	/* yes */' >> have_times.h; \
-	elif [ -f /usr/include/times.h ]; then \
+	elif echo '#include <times.h>' | ${CC} -E - >/dev/null 2>&1; then \
 	    echo '#define HAVE_TIMES_H	/* yes */' >> have_times.h; \
 	else \
 	    echo '#undef HAVE_TIMES_H  /* no */' >> have_times.h; \
@@ -2570,9 +2551,7 @@ have_times.h: ${MAKE_FILE}
 	    echo '#define HAVE_SYS_TIMES_H	/* yes */' >> have_times.h; \
 	elif [ X"${HAVE_SYS_TIMES_H}" = X"NO" ]; then \
 	    echo '#undef HAVE_SYS_TIMES_H  /* no */' >> have_times.h; \
-	elif [ -f ${INCDIR}/sys/times.h ]; then \
-	    echo '#define HAVE_SYS_TIMES_H  /* yes */' >> have_times.h; \
-	elif [ -f /usr/include/sys/times.h ]; then \
+	elif echo '#include <sys/times.h>' | ${CC} -E - >/dev/null 2>&1; then \
 	    echo '#define HAVE_SYS_TIMES_H  /* yes */' >> have_times.h; \
 	else \
 	    echo '#undef HAVE_SYS_TIMES_H  /* no */' >> have_times.h; \
@@ -2581,9 +2560,7 @@ have_times.h: ${MAKE_FILE}
 	    echo '#define HAVE_TIME_H	/* yes */' >> have_times.h; \
 	elif [ X"${HAVE_TIME_H}" = X"NO" ]; then \
 	    echo '#undef HAVE_TIME_H  /* no */' >> have_times.h; \
-	elif [ -f ${INCDIR}/time.h ]; then \
-	    echo '#define HAVE_TIME_H  /* yes */' >> have_times.h; \
-	elif [ -f /usr/include/time.h ]; then \
+	elif echo '#include <time.h>' | ${CC} -E - >/dev/null 2>&1; then \
 	    echo '#define HAVE_TIME_H  /* yes */' >> have_times.h; \
 	else \
 	    echo '#undef HAVE_TIME_H  /* no */' >> have_times.h; \
@@ -2592,9 +2569,7 @@ have_times.h: ${MAKE_FILE}
 	    echo '#define HAVE_SYS_TIME_H	/* yes */' >> have_times.h; \
 	elif [ X"${HAVE_SYS_TIME_H}" = X"NO" ]; then \
 	    echo '#undef HAVE_SYS_TIME_H  /* no */' >> have_times.h; \
-	elif [ -f ${INCDIR}/sys/time.h ]; then \
-	    echo '#define HAVE_SYS_TIME_H  /* yes */' >> have_times.h; \
-	elif [ -f /usr/include/sys/time.h ]; then \
+	elif echo '#include <sys/time.h>' | ${CC} -E - >/dev/null 2>&1; then \
 	    echo '#define HAVE_SYS_TIME_H  /* yes */' >> have_times.h; \
 	else \
 	    echo '#undef HAVE_SYS_TIME_H  /* no */' >> have_times.h; \
@@ -2630,9 +2605,7 @@ have_stdlib.h: ${MAKE_FILE}
 	    echo '#define HAVE_STDLIB_H	/* yes */' >> have_stdlib.h; \
 	elif [ X"${HAVE_STDLIB_H}" = X"NO" ]; then \
 	    echo '#undef HAVE_STDLIB_H  /* no */' >> have_stdlib.h; \
-	elif [ -f ${INCDIR}/stdlib.h ]; then \
-	    echo '#define HAVE_STDLIB_H	 /* yes */' >> have_stdlib.h; \
-	elif [ -f /usr/include/stdlib.h ]; then \
+	elif echo '#include <stdlib.h>' | ${CC} -E - >/dev/null 2>&1; then \
 	    echo '#define HAVE_STDLIB_H	 /* yes */' >> have_stdlib.h; \
 	else \
 	    echo '#undef HAVE_STDLIB_H	/* no */' >> have_stdlib.h; \
@@ -2668,9 +2641,7 @@ have_unistd.h: ${MAKE_FILE}
 	    echo '#define HAVE_UNISTD_H	/* yes */' >> have_unistd.h; \
 	elif [ X"${HAVE_UNISTD_H}" = X"NO" ]; then \
 	    echo '#undef HAVE_UNISTD_H  /* no */' >> have_unistd.h; \
-	elif [ -f ${INCDIR}/unistd.h ]; then \
-	    echo '#define HAVE_UNISTD_H	 /* yes */' >> have_unistd.h; \
-	elif [ -f /usr/include/unistd.h ]; then \
+	elif echo '#include <unistd.h>' | ${CC} -E - >/dev/null 2>&1; then \
 	    echo '#define HAVE_UNISTD_H	 /* yes */' >> have_unistd.h; \
 	else \
 	    echo '#undef HAVE_UNISTD_H	/* no */' >> have_unistd.h; \
@@ -2706,9 +2677,7 @@ have_string.h: ${MAKE_FILE}
 	    echo '#define HAVE_STRING_H	/* yes */' >> have_string.h; \
 	elif [ X"${HAVE_STRING_H}" = X"NO" ]; then \
 	    echo '#undef HAVE_STRING_H  /* no */' >> have_string.h; \
-	elif [ -f ${INCDIR}/string.h ]; then \
-	    echo '#define HAVE_STRING_H	 /* yes */' >> have_string.h; \
-	elif [ -f /usr/include/string.h ]; then \
+	elif echo '#include <string.h>' | ${CC} -E - >/dev/null 2>&1; then \
 	    echo '#define HAVE_STRING_H	 /* yes */' >> have_string.h; \
 	else \
 	    echo '#undef HAVE_STRING_H	/* no */' >> have_string.h; \
@@ -2748,22 +2717,12 @@ terminal.h: ${MAKE_FILE}
 	    echo '#undef USE_TERMIOS   /* <termios.h> */' >> terminal.h; \
 	    echo '#undef USE_TERMIO    /* <termio.h> */' >> terminal.h; \
 	    echo '#undef USE_SGTTY     /* <sys/ioctl.h> */' >> terminal.h; \
-	elif [ -f ${INCDIR}/termios.h ]; then \
+	elif echo '#include <termios.h>' | ${CC} -E - >/dev/null 2>&1; then \
 	    echo '/* use termios */' >> terminal.h; \
 	    echo '#define USE_TERMIOS  /* <termios.h> */' >> terminal.h; \
 	    echo '#undef USE_TERMIO    /* <termio.h> */' >> terminal.h; \
 	    echo '#undef USE_SGTTY     /* <sys/ioctl.h> */' >> terminal.h; \
-	elif [ -f ${INCDIR}/termio.h ]; then \
-	    echo '/* use termio */' >> terminal.h; \
-	    echo '#undef USE_TERMIOS   /* <termios.h> */' >> terminal.h; \
-	    echo '#define USE_TERMIO   /* <termio.h> */' >> terminal.h; \
-	    echo '#undef USE_SGTTY     /* <sys/ioctl.h> */' >> terminal.h; \
-	elif [ -f /usr/include/termios.h ]; then \
-	    echo '/* use termios */' >> terminal.h; \
-	    echo '#define USE_TERMIOS  /* <termios.h> */' >> terminal.h; \
-	    echo '#undef USE_TERMIO    /* <termio.h> */' >> terminal.h; \
-	    echo '#undef USE_SGTTY     /* <sys/ioctl.h> */' >> terminal.h; \
-	elif [ -f /usr/include/termio.h ]; then \
+	elif echo '#include <termio.h>' | ${CC} -E - >/dev/null 2>&1; then \
 	    echo '/* use termio */' >> terminal.h; \
 	    echo '#undef USE_TERMIOS   /* <termios.h> */' >> terminal.h; \
 	    echo '#define USE_TERMIO   /* <termio.h> */' >> terminal.h; \
--- a/cal/regress.cal
+++ b/cal/regress.cal
@@ -3227,9 +3227,9 @@ define test_error()

 	print '3600: Beginning test_error';

-	/* bump ecnt up by 148 */
-	ecnt += 148;
-	print				'3601: ecnt += 148';
+	/* bump ecnt up by 156 */
+	ecnt += 156;
+	print				'3601: ecnt += 156';

 	strx = "x";
 	print				'3602: strx = "x"';
@@ -3418,11 +3418,15 @@ define test_error()
 	n = 8191;
 	print				'3727: n = 8191';
 	/* test 3728 removed due to non-portable strerror() output */
+	vrfy(tan(2e9i) == error(10435),	'3729: tan(2e9i) == error(10435)');
+	vrfy(cot(2e9i) == error(10437),	'3730: cot(2e9i) == error(10437)');
+	vrfy(sec(2e9i) == error(10439),	'3731: sec(2e9i) == error(10439)');
+	vrfy(csc(2e9i) == error(10440),	'3732: csc(2e9i) == error(10440)');

 	/* errmax and errcount should be bumped up the 148 errors above */
-	vrfy(errcount() == ecnt,	'3729: errcount() == ecnt');
+	vrfy(errcount() == ecnt,	'3733: errcount() == ecnt');

-	print '3730: Ending test_error';
+	print '3734: Ending test_error';
 }
 print '054: parsed test_error()';

@@ -4102,38 +4106,46 @@ define test_strprintf()
 			'4821: strprintf("%b", 27/29) == "0b11011/0b11101"');
 	vrfy(strprintf("%e", 12345) == "~1.23e4",
 			'4822: strprintf("%e", 12345) == "~1.23e4"');
+	vrfy(strprintf("%g", .385) == "~.38",
+			'4823: strprintf("%g", .385) == "~.38"');
+	vrfy(strprintf("%g", 385) == "~3.8e2",
+			'4824: strprintf("%g", 385) == "~3.8e2"');

 	/* mode tests with tilde == 0 */
 	c = config("tilde", 0);
-	print		'4823: c = config("tilde", 0)';
+	print		'4825: c = config("tilde", 0)';
 	vrfy(strprintf("%e", 12345) == "1.23e4",
-			'4824: strprintf("%e", 12345) == "1.23e4"');
+			'4826: strprintf("%e", 12345) == "1.23e4"');
 	vrfy(strprintf("%.3e", 12345) == "1.234e4",
-			'4825: strprintf("%.3e", 12345) == "1.234e4"');
+			'4827: strprintf("%.3e", 12345) == "1.234e4"');
 	vrfy(strprintf("%e", .00012345) == "1.23e-4",
-			'4826: strprintf("%e", .00012345) == "1.23e-4"');
+			'4828: strprintf("%e", .00012345) == "1.23e-4"');
 	vrfy(strprintf("%d %d", 27) == "27 ",
-			'4827: strprintf("%d %d", 27) == "27 "');
+			'4829: strprintf("%d %d", 27) == "27 "');
 	vrfy(strprintf("%d", 27, 29) == "27",
-			'4828: strprintf("%d", 27, 29) == "27"');
+			'4830: strprintf("%d", 27, 29) == "27"');
 	vrfy(strprintf("%r = %f", 27/29, 27/29) == "27/29 = .93",
-		'4829: strprintf("%r = %f", 27/29, 27/29) == "27/29 = .93"');
+		'4831: strprintf("%r = %f", 27/29, 27/29) == "27/29 = .93"');
 	vrfy(strprintf("%s", "abc") == "abc",
-		'4830: strprintf("%s", "abc") == "abc"');
+		'4832: strprintf("%s", "abc") == "abc"');
 	vrfy(strprintf("%f", "abc") == "abc",
-		'4831: strprintf("%f", "abc") == "abc"');
+		'4833: strprintf("%f", "abc") == "abc"');
 	vrfy(strprintf("%e", "abc") == "abc",
-		'4832: strprintf("%e", "abc") == "abc"');
+		'4834: strprintf("%e", "abc") == "abc"');
 	vrfy(strprintf("%5s", "abc") == "  abc",
-		'4833: strprintf("%5s", "abc") == "  abc"');
+		'4835: strprintf("%5s", "abc") == "  abc"');
 	vrfy(strprintf("%-5s", "abc") == "abc  ",
-		'4834: strprintf("%-5s", "abc") == "abc	 "');
+		'4836: strprintf("%-5s", "abc") == "abc	 "');
+	vrfy(strprintf("%g", .385) == ".38",
+			'4837: strprintf("%g", .385) == ".38"');
+	vrfy(strprintf("%g", 385) == "3.8e2",
+			'4838: strprintf("%g", 385) == "3.8e2"');

 	/* restore config */
 	c = config("all", callcfg);
-	print				    '4835: c = config("all", callcfg)';
+	print				    '4839: c = config("all", callcfg)';

-	print '4836: Ending test_strprintf';
+	print '4840: Ending test_strprintf';
 }
 print '088: parsed test_fileop()';

@@ -7932,8 +7944,8 @@ print '8901: read -once "test8900"';
 read -once "test8900";
 print '8902: about to run test8900(1,,8903)';
 testnum = test8900(1,,8903);
-print '8999: ecnt = 203;'
-ecnt = 203;
+print '8999: ecnt = 211;'
+ecnt = 211;
 /* 89xx: test calc resource functions by Christoph Zurnieden */


--- a/calcerr.tbl
+++ b/calcerr.tbl
@@ -451,6 +451,7 @@ E_FPATHOPEN1	Non-string arguments for fpathopen
 E_FPATHOPEN2	Unrecognized mode for fpathopen
 E_LOG1		Bad epsilon argument for log
 E_LOG2		Non-numeric first argument for log
+E_LOG3		Cannot calculate log for this value
 E_FGETFILE1	Non-file argument for fgetfile
 E_FGETFILE2	File argument for fgetfile not open for reading
 E_FGETFILE3	Unable to set file position in fgetfile
@@ -471,3 +472,27 @@ E_ISSPACE	Bad argument for isspace
 E_ISXDIGIT	Bad argument for isxdigit
 E_STRTOUPPER    Bad argument type for strtoupper
 E_STRTOLOWER    Bad argument type for strtolower
+E_TAN3		Invalid value for calculating the sin numerator for tan
+E_TAN4		Invalid value for calculating the cos denominator for tan
+E_COT3		Invalid value for calculating the sin numerator for cot
+E_COT4		Invalid value for calculating the cos denominator for cot
+E_SEC3		Invalid value for calculating the cos reciprocal for sec
+E_CSC3		Invalid value for calculating the sin reciprocal for csc
+E_TANH3		Invalid value for calculating the sinh numerator for tanh
+E_TANH4		Invalid value for calculating the cosh denominator for tanh
+E_COTH3		Invalid value for calculating the sinh numerator for coth
+E_COTH4		Invalid value for calculating the cosh denominator for coth
+E_SECH3		Invalid value for calculating the cosh reciprocal for sech
+E_CSCH3		Invalid value for calculating the sinh reciprocal for csch
+E_ASIN3		Invalid value for calculating asin
+E_ACOS3		Invalid value for calculating acos
+E_ASINH3	Invalid value for calculating asinh
+E_ACOSH3	Invalid value for calculating acosn
+E_ATAN3		Invalid value for calculating atan
+E_ACOT3		Invalid value for calculating acot
+E_ASEC3		Invalid value for calculating asec
+E_ACSC3		Invalid value for calculating acsc
+E_ATANH3	Invalid value for calculating atan
+E_ACOTH3	Invalid value for calculating acot
+E_ASECH3	Invalid value for calculating asec
+E_ACSCH3	Invalid value for calculating acsc
--- a/comfunc.c
+++ b/comfunc.c
@@ -1182,7 +1182,7 @@ comprint(COMPLEX *c)
 		return;
 	}
 	if (!qiszero(c->real) || qiszero(c->imag))
-		qprintnum(c->real, MODE_DEFAULT);
+		qprintnum(c->real, MODE_DEFAULT, conf->outdigits);
 	qtmp = c->imag[0];
 	if (qiszero(&qtmp))
 		return;
@@ -1192,7 +1192,7 @@ comprint(COMPLEX *c)
 		math_chr('-');
 		qtmp.num.sign = 0;
 	}
-	qprintnum(&qtmp, MODE_DEFAULT);
+	qprintnum(&qtmp, MODE_DEFAULT, conf->outdigits);
 	math_chr('i');
 }

--- a/config.c
+++ b/config.c
@@ -274,6 +274,7 @@ STATIC NAMETYPE modes[] = {
 	{"oct",		MODE_OCTAL},
 	{"binary",	MODE_BINARY},
 	{"bin",		MODE_BINARY},
+	{"float-auto",	MODE_REAL_AUTO},
 	{"off",		MODE2_OFF},
 	{NULL,		0}
 };
--- a/custom/Makefile
+++ b/custom/Makefile
@@ -348,7 +348,7 @@ EXT=

 # The default calc versions
 #
-VERSION= 2.12.6.8
+VERSION= 2.12.7.1

 # Names of shared libraries with versions
 #
--- a/custom/Makefile.head
+++ b/custom/Makefile.head
@@ -348,7 +348,7 @@ EXT=

 # The default calc versions
 #
-VERSION= 2.12.6.8
+VERSION= 2.12.7.1

 # Names of shared libraries with versions
 #
--- a/file.c
+++ b/file.c
@@ -1031,6 +1031,9 @@ idprintf(FILEID id, char *fmt, int count, VALUE **vals)
 		case 'e':
 			newmode = MODE_EXP;
 			break;
+		case 'g':
+			newmode = MODE_REAL_AUTO;
+			break;
 		case 'r':
 			newmode = MODE_FRAC;
 			break;
--- a/func.c
+++ b/func.c
@@ -335,7 +335,7 @@ f_str(VALUE *vp)
 		break;
 	case V_NUM:
 		math_divertio();
-		qprintnum(vp->v_num, MODE_DEFAULT);
+		qprintnum(vp->v_num, MODE_DEFAULT, conf->outdigits);
 		cp = math_getdivertedio();
 		result.v_str = makestring(cp);
 		break;
@@ -2122,6 +2122,9 @@ f_log(int count, VALUE **vals)
 		default:
 			return error_value(E_LOG2);
 	}
+	if (c == NULL) {
+		return error_value(E_LOG3);
+	}
 	result.v_type = V_COM;
 	result.v_com = c;
 	if (cisreal(c)) {
@@ -2239,8 +2242,15 @@ f_tan(int count, VALUE **vals)
 		case V_COM:
 			tmp1.v_type = V_COM;
 			tmp1.v_com = c_sin(vals[0]->v_com, err);
+			if (tmp1.v_com == NULL) {
+				return error_value(E_TAN3);
+			}
 			tmp2.v_type = V_COM;
 			tmp2.v_com = c_cos(vals[0]->v_com, err);
+			if (tmp2.v_com == NULL) {
+				comfree(tmp1.v_com);
+				return error_value(E_TAN4);
+			}
 			divvalue(&tmp1, &tmp2, &result);
 			comfree(tmp1.v_com);
 			comfree(tmp2.v_com);
@@ -2276,6 +2286,9 @@ f_sec(int count, VALUE **vals)
 		case V_COM:
 			tmp.v_type = V_COM;
 			tmp.v_com = c_cos(vals[0]->v_com, err);
+			if (tmp.v_com == NULL) {
+				return error_value(E_SEC3);
+			}
 			invertvalue(&tmp, &result);
 			comfree(tmp.v_com);
 			break;
@@ -2314,8 +2327,15 @@ f_cot(int count, VALUE **vals)
 		case V_COM:
 			tmp1.v_type = V_COM;
 			tmp1.v_com = c_cos(vals[0]->v_com, err);
+			if (tmp1.v_com == NULL) {
+				return error_value(E_COT3);
+			}
 			tmp2.v_type = V_COM;
 			tmp2.v_com = c_sin(vals[0]->v_com, err);
+			if (tmp2.v_com == NULL) {
+				comfree(tmp1.v_com);
+				return error_value(E_COT4);
+			}
 			divvalue(&tmp1, &tmp2, &result);
 			comfree(tmp1.v_com);
 			comfree(tmp2.v_com);
@@ -2354,6 +2374,9 @@ f_csc(int count, VALUE **vals)
 		case V_COM:
 			tmp.v_type = V_COM;
 			tmp.v_com = c_sin(vals[0]->v_com, err);
+			if (tmp.v_com == NULL) {
+				return error_value(E_CSC3);
+			}
 			invertvalue(&tmp, &result);
 			comfree(tmp.v_com);
 			break;
@@ -2476,8 +2499,15 @@ f_tanh(int count, VALUE **vals)
 		case V_COM:
 			tmp1.v_type = V_COM;
 			tmp1.v_com = c_sinh(vals[0]->v_com, err);
+			if (tmp1.v_com == NULL) {
+				return error_value(E_TANH3);
+			}
 			tmp2.v_type = V_COM;
 			tmp2.v_com = c_cosh(vals[0]->v_com, err);
+			if (tmp2.v_com == NULL) {
+				comfree(tmp1.v_com);
+				return error_value(E_TANH4);
+			}
 			divvalue(&tmp1, &tmp2, &result);
 			comfree(tmp1.v_com);
 			comfree(tmp2.v_com);
@@ -2517,8 +2547,15 @@ f_coth(int count, VALUE **vals)
 		case V_COM:
 			tmp1.v_type = V_COM;
 			tmp1.v_com = c_cosh(vals[0]->v_com, err);
+			if (tmp1.v_com == NULL) {
+				return error_value(E_COTH3);
+			}
 			tmp2.v_type = V_COM;
 			tmp2.v_com = c_sinh(vals[0]->v_com, err);
+			if (tmp2.v_com == NULL) {
+				comfree(tmp1.v_com);
+				return error_value(E_COTH4);
+			}
 			divvalue(&tmp1, &tmp2, &result);
 			comfree(tmp1.v_com);
 			comfree(tmp2.v_com);
@@ -2555,6 +2592,9 @@ f_sech(int count, VALUE **vals)
 		case V_COM:
 			tmp.v_type = V_COM;
 			tmp.v_com = c_cosh(vals[0]->v_com, err);
+			if (tmp.v_com == NULL) {
+				return error_value(E_SECH3);
+			}
 			invertvalue(&tmp, &result);
 			comfree(tmp.v_com);
 			break;
@@ -2592,6 +2632,9 @@ f_csch(int count, VALUE **vals)
 		case V_COM:
 			tmp.v_type = V_COM;
 			tmp.v_com = c_sinh(vals[0]->v_com, err);
+			if (tmp.v_com == NULL) {
+				return error_value(E_CSCH3);
+			}
 			invertvalue(&tmp, &result);
 			comfree(tmp.v_com);
 			break;
@@ -2626,7 +2669,7 @@ f_atan(int count, VALUE **vals)
 		case V_COM:
 			tmp = c_atan(vals[0]->v_com, err);
 			if (tmp == NULL)
-				return error_value(E_LOGINF);
+				return error_value(E_ATAN3);
 			result.v_type = V_COM;
 			result.v_com = tmp;
 			if (cisreal(tmp)) {
@@ -2666,7 +2709,7 @@ f_acot(int count, VALUE **vals)
 		case V_COM:
 			tmp = c_acot(vals[0]->v_com, err);
 			if (tmp == NULL)
-				return error_value(E_LOGINF);
+				return error_value(E_ACOT3);
 			result.v_type = V_COM;
 			result.v_com = tmp;
 			if (cisreal(tmp)) {
@@ -2718,6 +2761,9 @@ f_asin(int count, VALUE **vals)
 		default:
 			return error_value(E_ASIN2);
 	}
+	if (result.v_com == NULL) {
+		return error_value(E_ASIN3);
+	}
 	if (result.v_type == V_COM && cisreal(result.v_com)) {
 		q = qlink(result.v_com->real);
 		comfree(result.v_com);
@@ -2764,6 +2810,9 @@ f_acos(int count, VALUE **vals)
 		default:
 			return error_value(E_ACOS2);
 	}
+	if (result.v_com == NULL) {
+		return error_value(E_ACOS3);
+	}
 	if (result.v_type == V_COM && cisreal(result.v_com)) {
 		q = qlink(result.v_com->real);
 		comfree(result.v_com);
@@ -2794,7 +2843,7 @@ f_asec(int count, VALUE **vals)
 	switch (vals[0]->v_type) {
 		case V_NUM:
 			if (qiszero(vals[0]->v_num))
-				return error_value(E_LOGINF);
+				return error_value(E_ASEC3);
 			result.v_num = qasec(vals[0]->v_num, err);
 			result.v_type = V_NUM;
 			if (result.v_num == NULL) {
@@ -2813,9 +2862,10 @@ f_asec(int count, VALUE **vals)
 		default:
 			return error_value(E_ASEC2);
 	}
+	if (result.v_com == NULL) {
+		return error_value(E_ASEC3);
+	}
 	if (result.v_type == V_COM) {
-		if (result.v_com == NULL)
-			return error_value(E_LOGINF);
 		if (cisreal(result.v_com)) {
 			q = qlink(result.v_com->real);
 			comfree(result.v_com);
@@ -2847,7 +2897,7 @@ f_acsc(int count, VALUE **vals)
 	switch (vals[0]->v_type) {
 		case V_NUM:
 			if (qiszero(vals[0]->v_num))
-				return error_value(E_LOGINF);
+				return error_value(E_ACSC3);
 			result.v_num = qacsc(vals[0]->v_num, err);
 			result.v_type = V_NUM;
 			if (result.v_num == NULL) {
@@ -2866,9 +2916,10 @@ f_acsc(int count, VALUE **vals)
 		default:
 			return error_value(E_ACSC2);
 	}
+	if (result.v_com == NULL) {
+		return error_value(E_ACSC3);
+	}
 	if (result.v_type == V_COM) {
-		if (result.v_com == NULL)
-			return error_value(E_LOGINF);
 		if (cisreal(result.v_com)) {
 			q = qlink(result.v_com->real);
 			comfree(result.v_com);
@@ -2903,6 +2954,9 @@ f_asinh(int count, VALUE **vals)
 			break;
 		case V_COM:
 			tmp = c_asinh(vals[0]->v_com, err);
+			if (tmp == NULL) {
+				return error_value(E_ASINH3);
+			}
 			result.v_type = V_COM;
 			result.v_com = tmp;
 			if (cisreal(tmp)) {
@@ -2955,6 +3009,9 @@ f_acosh(int count, VALUE **vals)
 		default:
 			return error_value(E_ACOSH2);
 	}
+	if (result.v_com == NULL) {
+		return error_value(E_ACOSH3);
+	}
 	if (result.v_type == V_COM && cisreal(result.v_com)) {
 		q = qlink(result.v_com->real);
 		comfree(result.v_com);
@@ -3002,9 +3059,10 @@ f_atanh(int count, VALUE **vals)
 		default:
 			return error_value(E_ATANH2);
 	}
+	if (result.v_com == NULL) {
+		return error_value(E_ATANH3);
+	}
 	if (result.v_type == V_COM) {
-		if (result.v_com == NULL)
-			return error_value(E_LOGINF);
 		if (cisreal(result.v_com)) {
 			q = qlink(result.v_com->real);
 			comfree(result.v_com);
@@ -3053,9 +3111,10 @@ f_acoth(int count, VALUE **vals)
 		default:
 			return error_value(E_ACOTH2);
 	}
+	if (result.v_com == NULL) {
+		return error_value(E_ACOTH3);
+	}
 	if (result.v_type == V_COM) {
-		if (result.v_com == NULL)
-			return error_value(E_LOGINF);
 		if (cisreal(result.v_com)) {
 			q = qlink(result.v_com->real);
 			comfree(result.v_com);
@@ -3087,7 +3146,7 @@ f_asech(int count, VALUE **vals)
 	switch (vals[0]->v_type) {
 		case V_NUM:
 			if (qiszero(vals[0]->v_num))
-				return error_value(E_LOGINF);
+				return error_value(E_ASECH3);
 			result.v_num = qasech(vals[0]->v_num, err);
 			result.v_type = V_NUM;
 			if (result.v_num == NULL) {
@@ -3106,9 +3165,10 @@ f_asech(int count, VALUE **vals)
 		default:
 			return error_value(E_ASECH2);
 	}
+	if (result.v_com == NULL) {
+		return error_value(E_ASECH3);
+	}
 	if (result.v_type == V_COM) {
-		if (result.v_com == NULL)
-			return error_value(E_LOGINF);
 		if (cisreal(result.v_com)) {
 			q = qlink(result.v_com->real);
 			comfree(result.v_com);
@@ -3140,7 +3200,7 @@ f_acsch(int count, VALUE **vals)
 	switch (vals[0]->v_type) {
 		case V_NUM:
 			if (qiszero(vals[0]->v_num))
-				return error_value(E_LOGINF);
+				return error_value(E_ACSCH3);
 			result.v_num = qacsch(vals[0]->v_num, err);
 			result.v_type = V_NUM;
 			if (result.v_num == NULL) {
@@ -3159,9 +3219,10 @@ f_acsch(int count, VALUE **vals)
 		default:
 			return error_value(E_ACSCH2);
 	}
+	if (result.v_com == NULL) {
+		return error_value(E_ACSCH3);
+	}
 	if (result.v_type == V_COM) {
-		if (result.v_com == NULL)
-			return error_value(E_LOGINF);
 		if (cisreal(result.v_com)) {
 			q = qlink(result.v_com->real);
 			comfree(result.v_com);
@@ -3260,7 +3321,7 @@ f_agd(int count, VALUE **vals)
 			return error_value(E_AGD2);
 	}
 	if (result.v_com == NULL)
-			return error_value(E_AGD3);
+		return error_value(E_AGD3);
 	if (cisreal(result.v_com)) {
 		q = qlink(result.v_com->real);
 		comfree(result.v_com);
--- a/help/config
+++ b/help/config
@@ -949,6 +949,48 @@ EXAMPLE
    ; display()
 	50

+    ; /*
+       * NOTE: When displaying many digits after the decimal point
+       *       be sure to set display(digits) (see 'help display') to
+       *       large enough AND to set epsilon(eps) (see 'help epsilon')
+       *       small enough (or if the function has a esp argument,
+       *       give a eps argument that is small enough) to display
+       *       the value correctly.
+       */
+    ; config("tilde", 1),;
+
+    ; /* NOTE: display has too few digits and epsilon is not small enough */
+    ; config("display", 12),;		/* or display(12),; */
+    ; printf("%f\n", pi(1e-10));
+    3.1415926536
+    ; config("epsilon", 1e-10),;	/* or epsilon(1e-10),; */
+    ; printf("%f\n", pi());
+    3.1415926536
+
+    ; /* NOTE: display has too few digits yet epsilon is small enough */
+    ; config("display", 12),;		/* or display(12),; */
+    ; printf("%f\n", pi(1e-72));
+    ~3.141592653590
+    ; config("epsilon", 1e-72),;	/* or epsilon(1e-72),; */
+    ; printf("%f\n", pi());
+    ~3.141592653590
+
+    ; /* NOTE: display has enough digits but epsilon is not small enough */
+    ; config("display", 72),;		/* or display(72),; */
+    ; printf("%f\n", pi(1e-10));
+    3.1415926536
+    ; config("epsilon", 1e-10),;	/* or epsilon(1e-10),; */
+    ; printf("%f\n", pi());
+    3.1415926536
+
+    /* NOTE: display has enough digits and epsilon is small enough */
+    ; config("display", 72),;		/* or display(72),; */
+    ; printf("%f\n", pi(1e-72));
+    3.141592653589793238462643383279502884197169399375105820974944592307816406
+    ; config("epsilon", 1e-72),;	/* or epsilon(1e-72),; */
+    ; printf("%f\n", pi());
+    3.141592653589793238462643383279502884197169399375105820974944592307816406
+
 LIMITS
    none

@@ -956,9 +998,9 @@ LINK LIBRARY
     n/a

 SEE ALSO
-     usage, custom, custom_cal, usage, epsilon, display
+     custom, custom_cal, display, epsilon, fprintf, printf, strprintf, usage

-## Copyright (C) 1999-2007  Landon Curt Noll
+## Copyright (C) 1999-2007,2018  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
--- a/help/display
+++ b/help/display
@@ -45,6 +45,48 @@ EXAMPLE
    ; print display(5), 2/3
    40 ~0.66667

+    ; /*
+       * NOTE: When displaying many digits after the decimal point
+       *       be sure to set display(digits) (see 'help display') to
+       *       large enough AND to set epsilon(eps) (see 'help epsilon')
+       *       small enough (or if the function has a esp argument,
+       *       give a eps argument that is small enough) to display
+       *       the value correctly.
+       */
+    ; config("tilde", 1),;
+
+    ; /* NOTE: display has too few digits and epsilon is not small enough */
+    ; display(12),;
+    ; printf("%f\n", pi(1e-10));
+    3.1415926536
+    ; epsilon(1e-10),;
+    ; printf("%f\n", pi());
+    3.1415926536
+
+    ; /* NOTE: display has too few digits yet epsilon is small enough */
+    ; display(12),;
+    ; printf("%f\n", pi(1e-72));
+    ~3.141592653590
+    ; epsilon(1e-72),;
+    ; printf("%f\n", pi());
+    ~3.141592653590
+
+    ; /* NOTE: display has enough digits but epsilon is not small enough */
+    ; display(72),;
+    ; printf("%f\n", pi(1e-10));
+    3.1415926536
+    ; epsilon(1e-10),;
+    ; printf("%f\n", pi());
+    3.1415926536
+
+    /* NOTE: display has enough digits and epsilon is small enough */
+    ; display(72),;
+    ; printf("%f\n", pi(1e-72));
+    3.141592653589793238462643383279502884197169399375105820974944592307816406
+    ; epsilon(1e-72),;
+    ; printf("%f\n", pi());
+    3.141592653589793238462643383279502884197169399375105820974944592307816406
+
 LIMITS
    d >= 0

@@ -52,9 +94,9 @@ LINK LIBRARY
    none

 SEE ALSO
-    config
+    config, epsilon, fprintf, printf, strprintf

-## Copyright (C) 2004  Landon Curt Noll
+## Copyright (C) 2004,2018  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
--- a/help/epsilon
+++ b/help/epsilon
@@ -16,13 +16,57 @@ DESCRIPTION
    and sets the stored epsilon value to eps.

    The stored epsilon value is used as default value for eps in
-    the functions appr(x, eps, rnd), sqrt(x, eps, rnd), etc.
+    many functions such as appr(x, eps, rnd), sqrt(x, eps, rnd),
+    pi(eps), sin(x, eps), tanh(x, eps), etc.

 EXAMPLE
+    ; epsilon(1e-20),;
    ; oldeps = epsilon(1e-6)
    ; print epsilon(), sqrt(2), epsilon(1e-4), sqrt(2), epsilon(oldeps)
    ; .000001 1.414214 .000001 1.4142 .0001

+    ; /*
+       * NOTE: When displaying many digits after the decimal point
+       *       be sure to set display(digits) (see 'help display') to
+       *       large enough AND to set epsilon(eps) (see 'help epsilon')
+       *       small enough (or if the function has a esp argument,
+       *       give a eps argument that is small enough) to display
+       *       the value correctly.
+       */
+    ; config("tilde", 1),;
+
+    ; /* NOTE: display has too few digits and epsilon is not small enough */
+    ; display(12),;
+    ; printf("%f\n", pi(1e-10));
+    3.1415926536
+    ; epsilon(1e-10),;
+    ; printf("%f\n", pi());
+    3.1415926536
+
+    ; /* NOTE: display has too few digits yet epsilon is small enough */
+    ; display(12),;
+    ; printf("%f\n", pi(1e-72));
+    ~3.141592653590
+    ; epsilon(1e-72),;
+    ; printf("%f\n", pi());
+    ~3.141592653590
+
+    ; /* NOTE: display has enough digits but epsilon is not small enough */
+    ; display(72),;
+    ; printf("%f\n", pi(1e-10));
+    3.1415926536
+    ; epsilon(1e-10),;
+    ; printf("%f\n", pi());
+    3.1415926536
+
+    /* NOTE: display has enough digits and epsilon is small enough */
+    ; display(72),;
+    ; printf("%f\n", pi(1e-72));
+    3.141592653589793238462643383279502884197169399375105820974944592307816406
+    ; epsilon(1e-72),;
+    ; printf("%f\n", pi());
+    3.141592653589793238462643383279502884197169399375105820974944592307816406
+
 LIMITS
    none

@@ -31,9 +75,9 @@ LINK LIBRARY
    NUMBER *_epsilon_

 SEE ALSO
-    config
+    config, display, fprintf, printf, strprintf

-## Copyright (C) 1999  Landon Curt Noll
+## Copyright (C) 1999,2018  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
--- a/help/fprintf
+++ b/help/fprintf
@@ -45,6 +45,48 @@ EXAMPLE
      [2] = "undefined"
      [3] = NULL

+    ; /*
+       * NOTE: When displaying many digits after the decimal point
+       *       be sure to set display(digits) (see 'help display') to
+       *       large enough AND to set epsilon(eps) (see 'help epsilon')
+       *       small enough (or if the function has a esp argument,
+       *       give a eps argument that is small enough) to display
+       *       the value correctly.
+       */
+    ; config("tilde", 1),;
+
+    ; /* NOTE: display has too few digits and epsilon is not small enough */
+    ; display(12),;
+    ; fprintf(files(1), "%f\n", pi(1e-10));
+    3.1415926536
+    ; epsilon(1e-10),;
+    ; fprintf(files(1), "%f\n", pi());
+    3.1415926536
+
+    ; /* NOTE: display has too few digits yet epsilon is small enough */
+    ; display(12),;
+    ; fprintf(files(1), "%f\n", pi(1e-72));
+    ~3.141592653590
+    ; epsilon(1e-72),;
+    ; fprintf(files(1), "%f\n", pi());
+    ~3.141592653590
+
+    ; /* NOTE: display has enough digits but epsilon is not small enough */
+    ; display(72),;
+    ; fprintf(files(1), "%f\n", pi(1e-10));
+    3.1415926536
+    ; epsilon(1e-10),;
+    ; fprintf(files(1), "%f\n", pi());
+    3.1415926536
+
+    /* NOTE: display has enough digits and epsilon is small enough */
+    ; display(72),;
+    ; fprintf(files(1), "%f\n", pi(1e-72));
+    3.141592653589793238462643383279502884197169399375105820974944592307816406
+    ; epsilon(1e-72),;
+    ; fprintf(files(1), "%f\n", pi());
+    3.141592653589793238462643383279502884197169399375105820974944592307816406
+
 LIMITS
    The number of arguments of fprintf() is not to exceed 1024.

@@ -52,9 +94,9 @@ LINK LIBRARY
    none

 SEE ALSO
-    printf, strprintf, print
+    config, display, epsilon, printf, strprintf

-## Copyright (C) 1999-2006  Landon Curt Noll
+## Copyright (C) 1999-2006,2018  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
--- a/help/printf
+++ b/help/printf
@@ -28,7 +28,7 @@ DESCRIPTION
 	    zero or more decimal digits
 	    an optional '. followed by zero or more decimal deigits
 	    an optional 'l'
-	    one of the letters: d, s, c, f, e, r, o, x, b,
+	    one of the letters: d, s, c, f, e, g, r, o, x, b,

    If any other character is read, the '%' and any characters
    between '%' and the character are ignored and no specifier is
@@ -51,26 +51,39 @@ DESCRIPTION
 	    d, s, c		current config("mode")
 	    f		real (decimal, floating point)
 	    e		exponential
+	    g		general format (real or exponential)
 	    r		fractional
 	    o		octal
 	    x		hexadecimal
 	    b		binary

-    If the number of arguments after fmt is less than the
-    number of format specifiers in fmt, the "missing" arguments
-    may be taken to be null values - these contribute nothing to the
-    output; if a positive width w has been specified, the effect is
-    to produce w spaces, e.g. printf("abc%6dxyz") prints "abc	   xyz".
+    If the number of arguments after fmt is less than the number
+    of format specifiers in fmt, the "missing" arguments may be
+    taken to be null values - these contribute nothing to the output;
+    if a positive width w has been specified, the effect is to
+    produce w spaces, e.g., printf("abc%6dxyz") prints "abc      xyz".

-    If i <= the number of specifiers in fmt, the value of argument x_i
-    is printed in the format specified by the i-th specifier.
-    If a positive width w has been specified and normal printing of x_i
-    does not include a '\n' character, what is printed will if necessary
-    be padded with spaces so that the length of the printed output
-    is at least the w.	Note that control
-    characters like '\t', '\b' each count as one character.  If
-    the 'right-pad' flag has been set, the padding is on the right;
-    otherwise it is on the left.
+    Control charters may be given in fmt by escaping them with
+    the \ character.  The following control charter escape
+    sequences are recognized:
+
+	\a	audible bell	byte 0x07 in ASCII encoding
+	\b	backspace	byte 0x08 in ASCII encoding
+	\f	form feed	byte 0x0c in ASCII encoding
+	\n	newline		byte 0x0b in ASCII encoding
+	\r	return		byte 0x0a in ASCII encoding
+	\t	tab		byte 0x0d in ASCII encoding
+	\v	vertical tab	byte 0x09 in ASCII encoding
+
+    If i <= the number of specifiers in fmt, the value of argument
+    x_i is printed in the format specified by the i-th specifier.
+    If a positive width w has been specified and normal printing
+    of x_i does not include a '\n' character, what is printed will
+    if necessary be padded with spaces so that the length of the
+    printed output is at least the w.  Note that control characters
+    (e.g., '\a', '\b', '\f', '\n', '\r', '\t', '\n') count as one
+    character.  If the 'right-pad' flag has been set, the padding
+    is on the right; otherwise it is on the left.

    If i > the number of specifiers in fmt, the value of argument x_i
    does not contribute to the printing.  However, as all arguments
@@ -83,22 +96,38 @@ DESCRIPTION
    specified precision will be ignored except for floating-point
    mode.

-    In the case of floating-point (f) format the precision determines
-    the maximum number of decimal places to be
-    displayed.	Other aspects of this printing may be affected by the
-    configuration parameters "outround", "tilde", "fullzero", "leadzero".
+    The (g) general format will print the as real (f) (decimal or
+    floating point) or as an exponential (e) depending on the
+    configuration parameter "display".
+
+    In the case of floating-point (f) format, and the (g) general
+    format, the precision determines the maximum number of decimal
+    places to be displayed.  Other aspects of this printing may be
+    affected by the configuration parameters "outround", "tilde",
+    "fullzero", "leadzero".

 EXAMPLE
-    ; c = config("epsilon", 1e-6); c = config("display", 6);
-    ; c = config("tilde", 1); c = config("outround", 0);
-    ; c = config("fullzero", 0);
+    ; config("epsilon", 1e-6),;
+    : config("display", 6),;
+    ; config("tilde", 1),;
+    ; config("outround", 0),;
+    ; config("fullzero", 0),;
    ; fmt = "%f,%10f,%-10f,%10.4f,%.4f,%.f.\n";
    ; a = sqrt(3);
    ; printf(fmt,a,a,a,a,a,a);
    1.732051,  1.732051,1.732051  ,   ~1.7320,~1.7320,~1.

-    ; c = config("tilde", 0); c = config("outround",24);
-    ; c = config("fullzero", 1);
+    ; config("display", 5),;
+    : config("tilde", 0),;
+    ; printf("%f\n", pi());
+    3.1416
+    ; config("display", 10),;
+    ; printf("%f\n", pi());
+    3.141592654
+
+    ; config("tilde", 0),;
+    : config("outround",24),;
+    ; config("fullzero", 1),;
    ; printf(fmt,a,a,a,a,a,a);
    1.732051,  1.732051,1.732051  ,    1.7321,1.7321,2.

@@ -116,6 +145,82 @@ EXAMPLE
      [2] = "undefined"
      [3] = NULL

+    ; config("display", 50),;
+    ; printf("%g %g\n%g %g\n", 1e5, 1e49, 1e50, 1e500);
+    100000 100000000000000000000000000000000000000000000000000
+    1e50 1e500
+
+    ; config("display", 10),;
+    : config("tilde", 0),;
+    ; printf("%f %f %f\n%f %f %f\n",
+             exp(1), exp(2), exp(3), exp(4), exp(5), exp(6));
+    2.7182818285 7.3890560989 20.0855369232
+    54.5981500331 148.4131591026 403.4287934927
+    ; printf("%e %e %e\n%e %e %e\n",
+             exp(1), exp(2), exp(3), exp(4), exp(5), exp(6));
+    2.7182818285 7.3890560989 2.0085536923e1
+    5.4598150033e1 1.4841315910e2 4.0342879349e2
+    ; printf("%g %g %g\n%g %g %g\n",
+             exp(1), exp(2), exp(3), exp(4), exp(5), exp(6));
+    2.718281828 7.389056099 20.08553692
+    54.59815003 148.4131591 403.4287935
+
+    ; config("display", 10),;
+    ; config("tilde", 0),;
+    ; printf("%f %f %f\n%f %f %f\n",
+             exp(20), exp(21), exp(22), exp(23), exp(24), exp(25));
+    485165195.4097902780 1318815734.4832146972 3584912846.1315915617
+    9744803446.2489026000 26489122129.8434722941 72004899337.3858725242`
+    ; printf("%e %e %e\n%e %e %e\n",
+             exp(20), exp(21), exp(22), exp(23), exp(24), exp(25));
+    4.8516519541e8 1.3188157345e9 3.5849128461e9
+    9.7448034462e9 2.6489122130e10 7.2004899337e10
+    ; printf("%g %g %g\n%g %g %g\n",
+             exp(20), exp(21), exp(22), exp(23), exp(24), exp(25));
+    485165195.4 1318815734 3584912846
+    9744803446 2.648912213e10 7.200489934e10
+
+    ; /*
+       * NOTE: When displaying many digits after the decimal point
+       *       be sure to set display(digits) (see 'help display') to
+       *       large enough AND to set epsilon(eps) (see 'help epsilon')
+       *       small enough (or if the function has a esp argument,
+       *       give a eps argument that is small enough) to display
+       *       the value correctly.
+       */
+    ; config("tilde", 1),;
+
+    ; /* NOTE: display has too few digits and epsilon is not small enough */
+    ; display(12),;
+    ; printf("%f\n", pi(1e-10));
+    3.1415926536
+    ; epsilon(1e-10),;
+    ; printf("%f\n", pi());
+    3.1415926536
+
+    ; /* NOTE: display has too few digits yet epsilon is small enough */
+    ; display(12),;
+    ; printf("%f\n", pi(1e-72));
+    ~3.141592653590
+    ; epsilon(1e-72),;
+    ; printf("%f\n", pi());
+    ~3.141592653590
+
+    ; /* NOTE: display has enough digits but epsilon is not small enough */
+    ; display(72),;
+    ; printf("%f\n", pi(1e-10));
+    3.1415926536
+    ; epsilon(1e-10),;
+    ; printf("%f\n", pi());
+    3.1415926536
+
+    /* NOTE: display has enough digits and epsilon is small enough */
+    ; display(72),;
+    ; printf("%f\n", pi(1e-72));
+    3.141592653589793238462643383279502884197169399375105820974944592307816406
+    ; epsilon(1e-72),;
+    ; printf("%f\n", pi());
+    3.141592653589793238462643383279502884197169399375105820974944592307816406

 LIMITS
    The number of arguments of printf() is not to exceed 1024.
@@ -124,9 +229,9 @@ LINK LIBRARY
    none

 SEE ALSO
-    fprintf, strprintf, print
+    config, display, epsilon, fprintf, strprintf

-## Copyright (C) 1999-2006  Landon Curt Noll
+## Copyright (C) 1999-2006,2018  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
--- a/help/str
+++ b/help/str
@@ -37,7 +37,7 @@ LIMITS

 LINK LIBRARY
    void math_divertio();
-    qprintnum(NUMBER *x, int outmode);
+    qprintnum(NUMBER *x, int outmode, LEN outdigits);
    char *math_getdivertedio();

    math_divertio();
@@ -47,7 +47,7 @@ LINK LIBRARY
 SEE ALSO
    base, base2, config

-## Copyright (C) 1999-2006  Landon Curt Noll
+## Copyright (C) 1999-2006,2018  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
--- a/help/strprintf
+++ b/help/strprintf
@@ -18,15 +18,68 @@ EXAMPLE
    ; strprintf("h=%d, i=%d", 2, 3);
 	    "h=2, i=3"

-    ; c = config("epsilon", 1e-6); c = config("display", 6);
-    ; c = config("tilde", 1); c = config("outround", 0);
-    ; c = config("fullzero", 0);
+    ; config("epsilon", 1e-6),;
+    ; config("display", 6),;
+    ; config("tilde", 1),;
+    ; config("outround", 0),;
+    ; config("fullzero", 0),;
    ; fmt = "%f,%10f,%-10f,%10.4f,%.4f,%.f.\n";
    ; a = sqrt(3);
    ; strprintf(fmt,a,a,a,a,a,a);
 	    "1.732051,	1.732051,1.732051  ,   ~1.7320,~1.7320,~1.
    "

+    ; config("display", 50),;
+    ; fmt2 = "%g %g\n%g %g\n"
+    ; strprintf(fmt2, 1e5, 1e49, 1e50, 1e500);
+	    "100000 100000000000000000000000000000000000000000000000000
+    1e50 1e500
+    "
+
+    ; /*
+       * NOTE: When displaying many digits after the decimal point
+       *       be sure to set display(digits) (see 'help display') to
+       *       large enough AND to set epsilon(eps) (see 'help epsilon')
+       *       small enough (or if the function has a esp argument,
+       *       give a eps argument that is small enough) to display
+       *       the value correctly.
+       */
+    ; config("tilde", 1),;
+    ; config("tab", 0),;
+    ; fmt1 = "%f";
+
+    ; /* NOTE: display has too few digits and epsilon is not small enough */
+    ; display(12),;
+    ; strprintf(fmt1, pi(1e-10));
+    "3.1415926536"
+    ; epsilon(1e-10),;
+    ; strprintf(fmt1, pi());
+    "3.1415926536"
+
+    ; /* NOTE: display has too few digits yet epsilon is small enough */
+    ; display(12),;
+    ; strprintf(fmt1, pi(1e-72));
+    "~3.141592653590"
+    ; epsilon(1e-72),;
+    ; strprintf(fmt1, pi());
+    ~3.141592653590
+
+    ; /* NOTE: display has enough digits but epsilon is not small enough */
+    ; display(72),;
+    ; strprintf(fmt1, pi(1e-10));
+    "3.1415926536"
+    ; epsilon(1e-10),;
+    ; strprintf(fmt1, pi());
+    "3.1415926536"
+
+    /* NOTE: display has enough digits and epsilon is small enough */
+    ; display(72),;
+    ; strprintf(fmt1, pi(1e-72));
+    "3.141592653589793238462643383279502884197169399375105820974944592307816406"
+    ; epsilon(1e-72),;
+    ; strprintf(fmt1, pi());
+    "3.141592653589793238462643383279502884197169399375105820974944592307816406"
+
 LIMITS
    The number of arguments of strprintf() is not to exceed 1024.

@@ -34,12 +87,11 @@ LINK LIBRARY
    none

 SEE ALSO
-    strcat, strcpy, strerror, strlen, strncmp, strncpy, strpos,
-    strscan, strscanf, substr,
+    config, display, epsilon, fprintf, strcat, strcpy, strerror,
+    strlen, strncmp, strncpy, strpos, strscan, strscanf, substr,
+    printf

-    printf, fprintf, print
-
-## Copyright (C) 1999-2006  Landon Curt Noll
+## Copyright (C) 1999-2006,2018  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
--- a/longbits.c
+++ b/longbits.c
@@ -92,12 +92,6 @@
 # include <stdlib.h>
 #endif

-#if defined(__linux)
-# if !defined(isascii)
-   E_FUNC int isascii(int c);
-# endif /* !isascii */
-#endif /* __linux */
-
 char *program;		/* our name */

 int
--- a/qio.c
+++ b/qio.c
@@ -62,12 +62,13 @@ qprintf(char *fmt, ...)
 			if (ch == '\\') {
 				ch = *fmt++;
 				switch (ch) {
+				case 'a': ch = '\a'; break;
+				case 'b': ch = '\b'; break;
+				case 'f': ch = '\f'; break;
 				case 'n': ch = '\n'; break;
 				case 'r': ch = '\r'; break;
 				case 't': ch = '\t'; break;
-				case 'f': ch = '\f'; break;
 				case 'v': ch = '\v'; break;
-				case 'b': ch = '\b'; break;
 				case 0:
 					va_end(ap);
 					return;
@@ -97,6 +98,15 @@ qprintf(char *fmt, ...)
 			q = va_arg(ap, NUMBER *);
 			qprintfe(q, width, precision);
 			break;
+		case 'g':
+			q = va_arg(ap, NUMBER *);
+			/* XXX - we need a qprintfg function */
+#if 0	/* XXX - we need a qprintfg() function */
+			qprintfg(q, width, precision);
+#else	/* XXX - use qprintfe until we have a qprintfg() function */
+			qprintfe(q, width, precision);
+#endif	/* XXX - we need a qprintfg() function */
+			break;
 		case 'r':
 		case 'R':
 			q = va_arg(ap, NUMBER *);
@@ -174,7 +184,7 @@ qprintf(char *fmt, ...)
 * Integers are always printed as themselves.
 */
 void
-qprintnum(NUMBER *q, int outmode)
+qprintnum(NUMBER *q, int outmode, LEN outdigits)
 {
 	NUMBER tmpval;
 	long prec, exp;
@@ -193,13 +203,13 @@ qprintnum(NUMBER *q, int outmode)

 	case MODE_REAL:
 		prec = qdecplaces(q);
-		if ((prec < 0) || (prec > conf->outdigits)) {
+		if ((prec < 0) || (prec > outdigits)) {
 			if (conf->tilde_ok)
 			    PUTCHAR('~');
 		}
 		if (conf->fullzero || (prec < 0) ||
-		    (prec > conf->outdigits))
-			prec = conf->outdigits;
+		    (prec > outdigits))
+			prec = outdigits;
 		qprintff(q, 0L, prec);
 		break;

@@ -216,7 +226,7 @@ qprintnum(NUMBER *q, int outmode)
 		tmpval.num.sign = 0;
 		exp = qilog10(&tmpval);
 		if (exp == 0) {		/* in range to output as real */
-			qprintnum(q, MODE_REAL);
+			qprintnum(q, MODE_REAL, outdigits);
 			return;
 		}
 		tmpval.num = _one_;
@@ -228,11 +238,25 @@ qprintnum(NUMBER *q, int outmode)
 		q = qmul(q, &tmpval);
 		zfree(tmpval.num);
 		zfree(tmpval.den);
-		qprintnum(q, MODE_REAL);
+		qprintnum(q, MODE_REAL, outdigits);
 		qfree(q);
 		PRINTF1("e%ld", exp);
 		break;

+	case MODE_REAL_AUTO:
+	{
+		const int P = conf->outdigits ? conf->outdigits : 1;
+		tmpval = *q;
+		tmpval.num.sign = 0;
+		exp = qilog10(&tmpval);
+		if (P > exp && exp >= -P) {
+			qprintnum(q, MODE_REAL, P - 1 - exp);
+		} else {
+			qprintnum(q, MODE_EXP, P - 1);
+		}
+		break;
+	}
+
 	case MODE_HEX:
 		qprintfx(q, 0L);
 		break;
@@ -252,7 +276,7 @@ qprintnum(NUMBER *q, int outmode)

 	if (outmode2 != MODE2_OFF) {
 		PUTSTR(" /* ");
-		qprintnum(q, outmode2);
+		qprintnum(q, outmode2, outdigits);
 		PUTSTR(" */");
 	}
 }
--- a/qmath.h
+++ b/qmath.h
@@ -67,7 +67,7 @@ E_FUNC FULL qtou(NUMBER *q);
 E_FUNC SFULL qtos(NUMBER *q);
 E_FUNC long qparse(char *str, int flags);
 E_FUNC void qfreenum(NUMBER *q);
-E_FUNC void qprintnum(NUMBER *q, int mode);
+E_FUNC void qprintnum(NUMBER *q, int mode, LEN outdigits);
 E_FUNC void qprintff(NUMBER *q, long width, long precision);
 E_FUNC void qprintfe(NUMBER *q, long width, long precision);
 E_FUNC void qprintfr(NUMBER *q, long width, BOOL force);
--- a/qmod.c
+++ b/qmod.c
@@ -404,7 +404,7 @@ showredcdata(void)
 	for (i = 0, rcp = redc_cache; i < MAXREDC; i++, rcp++) {
 		if (rcp->age > 0) {
 			printf("%-8ld%-8ld", i, rcp->age);
-			qprintnum(rcp->rnum, 0);
+			qprintnum(rcp->rnum, 0, conf->outdigits);
 			printf("\n");
 		}
 	}
--- a/str.c
+++ b/str.c
@@ -1380,17 +1380,17 @@ printechar(char *c)
 	math_chr('\\');
 	ech = 0;
 	switch (ch) {
+	case '\a': ech = 'a'; break;
+	case '\b': ech = 'b'; break;
+	case '\f': ech = 'f'; break;
 	case '\n': ech = 'n'; break;
 	case '\r': ech = 'r'; break;
 	case '\t': ech = 't'; break;
-	case '\b': ech = 'b'; break;
-	case '\f': ech = 'f'; break;
 	case '\v': ech = 'v'; break;
 	case '\\': ech = '\\'; break;
 	case '\"': ech = '\"'; break;
 	case '\'': ech = '\''; break;
 	case 0: ech = '0'; break;
-	case 7: ech = 'a'; break;
 	case 27: ech = 'e'; break;
 	}
 	if (ech == '0') {
@@ -1438,8 +1438,17 @@ fitstring(char *str, long len, long width)
 			continue;
 		n++;
 		switch (ch) {
-		case '\n': case '\r': case '\t': case '\b': case '\f':
-		case '\v': case '\\': case '\"': case 7: case 27:
+		case '\a':
+		case '\b':
+		case '\f':
+		case '\n':
+		case '\r':
+		case '\t':
+		case '\v':
+		case '\\':
+		case '\"':
+		case '\'':
+		case 27:
 			continue;
 		}
 		if (ch >= 64 || (nch >= '0' && nch <= '7')) {
--- a/token.c
+++ b/token.c
@@ -183,10 +183,12 @@ gettoken(void)
 		}
 		switch (ch) {
 		case ' ':
-		case '\t':
-		case '\r':
-		case '\v':
+		case '\a':
+		case '\b':
 		case '\f':
+		case '\r':
+		case '\t':
+		case '\v':
 		case '\0':
 			break;
 		case '\n':
--- a/value.c
+++ b/value.c
@@ -2774,7 +2774,7 @@ printvalue(VALUE *vp, int flags)
 	}
 	switch (type) {
 	case V_NUM:
-		qprintnum(vp->v_num, MODE_DEFAULT);
+		qprintnum(vp->v_num, MODE_DEFAULT, conf->outdigits);
 		if (conf->traceflags & TRACE_LINKS)
 			math_fmt("#%ld", vp->v_num->links);
 		break;
@@ -2835,7 +2835,7 @@ printvalue(VALUE *vp, int flags)
 		if (userfunc("octet_print", vp))
 			break;
 		qtemp = itoq((long) *vp->v_octet);
-		qprintnum(qtemp, MODE_DEFAULT);
+		qprintnum(qtemp, MODE_DEFAULT, conf->outdigits);
 		qfree(qtemp);
 		break;
 	case V_OPTR:
@@ -2888,7 +2888,7 @@ printestr(VALUE *vp)
 			math_chr('"');
 			return;
 		case V_NUM:
-			qprintnum(vp->v_num, MODE_FRAC);
+			qprintnum(vp->v_num, MODE_FRAC, conf->outdigits);
 			return;
 		case V_COM:
 			mode = math_setmode(MODE_FRAC);
--- a/version.c
+++ b/version.c
@@ -44,8 +44,8 @@ static char *program;

 #define MAJOR_VER	2	/* major library version */
 #define MINOR_VER	12	/* minor library version */
-#define MAJOR_PATCH	6	/* major software level under library version */
-#define MINOR_PATCH	8	/* minor software level or 0 if not patched */
+#define MAJOR_PATCH	7	/* major software level under library version */
+#define MINOR_PATCH	1	/* minor software level or 0 if not patched */


 /*
--- a/zmath.h
+++ b/zmath.h
@@ -579,10 +579,16 @@ E_FUNC void zredcpower(REDC *rp, ZVALUE z1, ZVALUE z2, ZVALUE *res);
 #define MODE_HEX	5
 #define MODE_OCTAL	6
 #define MODE_BINARY	7
-#define MODE_MAX	7
+#define MODE_REAL_AUTO	8
+#define MODE_MAX	8
 #define MODE2_OFF	(MODE_MAX+1)

+/* XXX - perhaps we need the MODE_REAL_AUTO vs MODE_REAL as a config mode? */
+#if 0 	/* XXX - can we safely set MODE_INITIAL to MODE_REAL_AUTO ?? */
+#define MODE_INITIAL	MODE_REAL_AUTO
+#else
 #define MODE_INITIAL	MODE_REAL
+#endif
 #define MODE2_INITIAL	MODE2_OFF
Author	SHA1	Message	Date
Landon Curt Noll	37ad43c7fd	Release calc 2.12.7.1 Corrected CHANGES notes that were mixed up for TAB, VT, CR & NL. The code in 2.12.7.0 is correct. The CHANGE notes should have read: The following is a partial list of escape sequences recognized in strings and in printf formats: \a audible bell byte 0x07 in ASCII encoding \b backspace byte 0x08 in ASCII encoding \f form feed byte 0x0c in ASCII encoding \n newline byte 0x0a in ASCII encoding \r return byte 0x0d in ASCII encoding \t tab byte 0x09 in ASCII encoding \v vertical tab byte 0x0b in ASCII encoding Sorry!	2018-11-05 08:02:09 -08:00
Landon Curt Noll	a877cb52c0	Corrected CHANGES notes Corrected CHANGES notes that were mixed up for TAB, VT, CR & NL. The core in 2.12.7.0 is correct. The CHANGE notes were mixed up. Sorry!	2018-11-05 07:33:40 -08:00
Landon Curt Noll	4bec694df3	Release calc version 2.12.7.0 The following are the changes from calc version 2.12.7.0 to date: Added a patch to replaces the manual search for include files in $(INCDIR) in the have_*.h targets with compiler invocations. Thanks goes to Helmut Grohne (helmut at subdivi dot de) who implemented the patch and posted it to the Debian bug tracker and Martin Buck (m at rtin-buck dor de) for forwarding it to us. The check_include make rule was fixed to not assume /usr/include. The qprintnum() function now takes outdigits as a 3rd argument. Most of the time, this 3rd argument is just conf->outdigits. But when it comes to the experimental '%g', this value can change. This avoids having to modify conf->outdigits. Fixed a problem where gcc complains about E_FUNC not being defined for Linux systems as reported by Martin Buck (m at rtin-buck dor de). Updated the help files help/config, help/display, help/epsilon, help/fprint, help/printf, and help/strprintf to give more examples of how display digits and epsilon precision interact with displaying values. Added more information about %g in the help file help/printf. The '\a' is now recognized in a printf format string as the single byte audible bell character (byte 0x07 in ASCII encoding). The following is a partial list of escape sequences recognized in strings and in printf formats: \a audible bell byte 0x07 in ASCII encoding \b backspace byte 0x08 in ASCII encoding \f form feed byte 0x0c in ASCII encoding \n newline byte 0x0b in ASCII encoding \r return byte 0x0a in ASCII encoding \t tab byte 0x0d in ASCII encoding \v vertical tab byte 0x09 in ASCII encoding	2018-11-04 17:11:31 -08:00
Landon Curt Noll	4870a7a164	Sync check_include rule with Makefile.ship	2018-11-04 17:10:46 -08:00
Landon Curt Noll	84ccb37bc3	Regualrize escape characters Regularized the case statements in qio.c, str.c, and token.c that relate to escape characters. The '\a' is now recognized in a printf format string as the single byte audible bell character (byte 0x07 in ASCII encoding). The following is a partial list of escape sequences recognized in strings and in printf formats: \a audible bell byte 0x07 in ASCII encoding \b backspace byte 0x08 in ASCII encoding \f form feed byte 0x0c in ASCII encoding \n newline byte 0x0b in ASCII encoding \r return byte 0x0a in ASCII encoding \t tab byte 0x0d in ASCII encoding \v vertical tab byte 0x09 in ASCII encoding	2018-11-04 17:08:11 -08:00
Landon Curt Noll	29c6e9325f	Fix issue with E_FUNC under linux Fixed a problem where gcc complains about E_FUNC not being defined for Linux systems as reported by Martin Buck (m at rtin-buck dor de).	2018-11-04 17:01:24 -08:00
Landon Curt Noll	81a4a4f828	Improve string and printing documentation Updated the help files help/config, help/display, help/epsilon, help/fprint, help/printf, and help/strprintf to give more examples of how display digits and epsilon precision interact with displaying values. Added more information about %g in the help file help/printf. The '\a' is now recognized in a printf format string as the single byte audible bell character (byte 0x07 in ASCII encoding). The following is a partial list of escape sequences recognized in strings and in printf formats: \a audible bell byte 0x07 in ASCII encoding \b backspace byte 0x08 in ASCII encoding \f form feed byte 0x0c in ASCII encoding \n newline byte 0x0b in ASCII encoding \r return byte 0x0a in ASCII encoding \t tab byte 0x0d in ASCII encoding \v vertical tab byte 0x09 in ASCII encoding	2018-11-04 17:00:15 -08:00
Landon Curt Noll	1cdb5172d8	Fix Makefile lines that picky complains about	2018-10-19 19:41:58 -07:00
Landon Curt Noll	54a7a3f7bc	Release 2.12.6.10 Added a patch to replaces the manual search for include files in $(INCDIR) in the have_*.h targets with compiler invocations. Thanks goes to Helmut Grohne <helmut at subdivi dot de> who implemented the patch and posted it to the Debian bug tracker and Martin Buck (m at rtin-buck dor de) for forwarding it to us. The check_include make rule was fixed to not assume /usr/include. The qprintnum() function now takes outdigits as a 3rd argument. Most of the time, this 3rd argument is just conf->outdigits. But when it comes to the experimental '%g', this value can change. This avoids having to modify conf->outdigits.	2018-10-19 19:33:57 -07:00
Landon Curt Noll	2ea77e6151	Release 2.12.6.9 Experimental changes for macOS builds.	2018-10-15 19:37:48 -07:00
Landon Curt Noll	5cfa6199e5	Merge branch '10110111-master'	2018-09-30 16:11:23 -07:00
Landon Curt Noll	da6ccc146f	Improvements to %g pull request This code %g is preliminary. Fixed some code style issues to match the current code style. Added regression tests and help file updates to printf and strprintf. Fixed use of magic number -4: using -P instead. Noted two problem areas with XXX comments in qio.c: 1) need a qprintfg function 2) re-write to not modify conf->outdigits	2018-09-30 16:06:28 -07:00
Landon Curt Noll	fcfe237375	Merge branch 'master' of https://github.com/10110111/calc into 10110111-master	2018-09-30 14:22:41 -07:00
Landon Curt Noll	5fb3db4558	Fixed trigonometric and hyperbolic core dumps	2018-09-30 14:08:20 -07:00
Ruslan Kabatsayev	0558bafcb6	Use MODE_REAL_AUTO by default instead of MODE_REAL This will save the user from embarrassment due to getting ~0.00000000000000000000 as the result instead of e.g. 1.23e-53.	2018-06-30 18:44:14 +03:00
Ruslan Kabatsayev	f58277f53d	Implement %g format for printf	2018-06-30 18:35:35 +03:00