Release calc version 2.12.5.2

BUGS

@@ -32,16 +32,25 @@ If you have tried all of the above and things still are not right,
 then it may be time to send in a bug report.  You can send bug
 and bug fixes reports to:
 
-    calc-bugs at asthe dot com
+	calc-bug-report at asthe dot com
 
-    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-    [[ NOTE: The EMail address uses 'asthe', the web site URL uses 'isthe' ]]
+	NOTE: Remove spaces and replace 'at' with @, 'dot' with .
 
-Your subject must contain the words:
+    This replaces the old calc-bugs at asthe dot com address.
 
-       calc bug report
+    To be sure we see your EMail reporting a calc bug, please use the
+    following phase in your EMail Subject line:
 
-You may have additional words in your subject line.
+	calc bug report
+
+    That phrase in your subject line will help ensure your request
+    will get past our anti-spam filters.  You may have additional
+    words in your subject line.
+
+    However, you may find it more helpful to simply subscribe
+    to the calc-tester mailing list (see below) and then to
+    send your report to that mailing list as a wider set calc
+    testers may be able to help you.
 
 When you send your report, please include the following information:
 
@@ -68,20 +77,15 @@ of a context diff patch).
 
 Known bugs:
 
+    The output of the alg_config.cal resource file is bogus.
+    We would welcome a replacement for this code.
+
     We are sure some more bugs exist.  When you find them, please let
     us know!  See the above for details on how to report and were to
     EMail your bug reports and hopefully patches to fix them.
 
 =-=
 
-Problems that have known work-a-rounds:
-
-    * There is a bug in gcc v4.1.0 that causes calc to fail the regression
-      test.  The work-a-round is to compile with gcc v4.1.1 or later.  This
-      problems was observed on Fedora 5.
-
-=-=
-
 mis-features in calc:
 
     Some problems are not bugs but rather mis-features / things that could
@@ -129,7 +133,34 @@ mis-features in calc:
 
       will not.
 
-## Copyright (C) 1999-2013  Landon Curt Noll
+=-=
+
+To subscribe to the calc-tester mailing list, visit the following URL:
+
+	http://www.isthe.com/chongo/tech/comp/calc/calc-tester.html
+
+    This is a low volume moderated mailing list.
+
+    This mailing list replaces calc-tester at asthe dot com list.
+
+    If you need a human to help you with your mailing list subscription,
+    please send EMail to our special:
+
+	calc-tester-maillist-help at asthe dot com
+
+	NOTE: Remove spaces and replace 'at' with @, 'dot' with .
+
+    address.  To be sure we see your EMail asking for help with your
+    mailing list subscription, please use the following phase in your
+    EMail Subject line:
+
+	calc tester mailing list help
+
+    That phrase in your subject line will help ensure your
+    request will get past our anti-spam filters.  You may have
+    additional words in your subject line.
+
+## Copyright (C) 1999-2014  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -145,8 +176,8 @@ mis-features in calc:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 30.2 $
-## @(#) $Id: BUGS,v 30.2 2013/08/11 01:09:27 chongo Exp $
+## @(#) $Revision: 30.5 $
+## @(#) $Id: BUGS,v 30.5 2014/10/12 12:23:43 chongo Exp $
 ## @(#) $Source: /usr/local/src/bin/calc/RCS/BUGS,v $
 ##
 ## Under source code control:	1994/03/18 14:06:13

CHANGES

@@ -1,4 +1,260 @@
-The following are the changes from calc version 2.12.4.6 to date:
+The following are the changes from calc version 2.12.5.1 to date:
+
+    Removed rules and makefile variables assocated with shortened
+    calc version numbers of less than 4 levels.
+
+    Under OS X (darwin), if /usr/include is missing, warnings
+    are issued to help the user use xcode-select --install
+    so that one may properly compile C code.
+
+    Lowered REDC levels:
+
+	#define MAXREDC 256	/* number of entries in REDC cache */
+
+	#define SQ_ALG2 28	/* size for alternative squaring */
+	    config("sq2") == 28		/* was 3388 */
+	#define MUL_ALG2 28	/* size for alternative multiply */
+	    config("mul2") == 28	/* was 1780 */
+	#define POW_ALG2 20	/* size for using REDC for powers */
+	    config("pow2") == 20	/* was 176 */
+	#define REDC_ALG2 25	/* size for using alternative REDC */
+	    config("redc2") == 25	/* was 220 */
+
+    The alg_config.cal script appears to be not correctly finding the
+    best REDC values.  While it has been improved, alg_config.cal still
+    seems to be suspect on how it attempts to find the best values.
+
+    Fixed an intro help file mistake found by Roger Hardiman
+    <roger at rjh dot org dot uk>.
+
+
+The following are the changes from calc version 2.12.5.0 to 2.12.5.1:
+
+    Calc has a new calc-tester mailing list.  This list is for those
+    who are using/testing calc.  We also use this list to announce
+    new versions of calc.  To subscribe to the calc-tester mailing
+    list, visit the following URL:
+
+	    http://www.isthe.com/chongo/tech/comp/calc/calc-tester.html
+
+	This is a low volume moderated mailing list.
+
+	This mailing list replaces calc-tester at asthe dot com list.
+
+	If you need a human to help you with your mailing list subscription,
+	please send EMail to our special:
+
+	    calc-tester-maillist-help at asthe dot com
+
+	address.  To be sure we see your EMail asking for help with your
+	mailing list subscription, please use the following phase in your
+	EMail Subject line:
+
+	    calc tester mailing list help
+
+	That phrase in your subject line will help ensure your
+	request will get past our anti-spam filters.  You may have
+	additional words in your subject line.
+
+    There is a new calc bug report EMail address:
+
+	    calc-bug-report at asthe dot com
+
+	This replaces the old calc-bugs at asthe dot com address.
+
+	To be sure we see your EMail reporting a calc bug, please use the
+	following phase in your EMail Subject line:
+
+	    calc bug report
+
+	That phrase in your subject line will help ensure your
+	request will get past our anti-spam filters.  You may have
+	additional words in your subject line.
+
+	However, you may find it more helpful to simply subscribe
+	to the calc-tester mailing list (see above) and then to
+	send your report to that mailing list as a wider set calc
+	testers may be able to help you.
+
+    The following makefile rules that were related to printing the
+    upper values of the calc version, rules that were made obsolete
+    in calc version 2.12.4.14, have been removed:
+
+	calc_vers calc_ver calc_ve
+	vers ver ve
+
+    Noted that the hash() builtin function, internally known as
+    quickhash (used for internal objects such as the associative
+    arrays as well as other internal processes) uses the deprcated
+    32-bit FNV-0 hash.  The use of this deprecated hash is sufficient
+    for calc internal purposes.  Use of FNV-1a is recommended for
+    a general non-cryptographic quick hash.
+
+
+The following are the changes from calc version 2.12.4.14 to 2.12.5.0:
+
+    For Apple OS X / Darwin target:
+
+    	MACOSX_DEPLOYMENT_TARGET is no longer defined
+	using clang compiler
+
+	By default, -install-name is used when forming shared libs.
+	To force -install-name to not be used, set SET_INSTALL_NAME=no.
+
+    The have_stdvs.c test uses <stdlib.h> and fixed va_start() test call
+    that didn't use last arg.
+
+    Fixed math_fmt (printf) in value.c where a LEN (SB32) be printed as %d.
+
+    Fixed a significant bug where that resulted in an incorrect
+    complex number comparison.  Thanks goes to David Binderman
+    <dcb314 at hotmail dot com> for identifying the subtle typo!
+
+    Make minor fixes to the make depend rule.
+
+    Fixed places were calc defined a reserved identifier that
+    begin with either __ or _[A-Z].  For example, __FILE_H__ has
+    been replaced with INCLUDE_FILE_H.
+
+    Fixed the addall3 example in the script help file.  Thanks for this
+    fix goes to Igor Furlan <igor dot furlan at gmail dot com>.
+
+    We made important fixes to the calc command line history:
+
+	Fixed a bug in the command line history where calc would somtimes
+	crash.  There was code that used memcpy() instead of memmove()
+	that could corrupt the command line history when entering a
+	into into history that was similar to a previous entry.  Thanks
+	goes to Einar Lielmanis <einars at spicausis dot lv> for first
+	identifying this mistake.
+
+	The calc command line history code, in general was not robust.
+	We made use a patch from Mathias Buhr <napcode at users dot sf
+	dot net>, that while it uses a bit more memory: is much more
+	flexible, readable and robust.  This patch replaced the improer
+	use of memcpy() (see above) with better code.  Thanks!
+
+    The alg_config.cal calc resource file has been reworked to produce
+    better diagnostics while attempting to determine the ideal values
+    for mul2, sq2, and pow2.  However, it has been shown that this
+    code is not correct.  Suggestions for a replacement are welcome!
+
+   	calc -u 'read alg_config; config("user_debug", 2),; best_mul2();'
+   	calc -u 'read alg_config; config("user_debug", 2),; best_sq2();'
+   	calc -u 'read alg_config; config("user_debug", 2),; best_pow2();'
+
+    Fixed a number of pedantic compiler warnings.
+
+    Removed -W and -Wno-comment from the the CCWARN makefile variable.
+
+    Removed no_implicit.arg makefile rule.  Removed HAVE_NO_IMPLICIT
+    makefile variable.  Removed no_implicit.c source file.
+
+    Added WNO_IMPLICT makefile variable to hold the compiler flag
+    -Wno-implicit for use on selective compile lines.
+
+    Added WNO_ERROR_LONG_LONG makefile variable to hold the compiler flag
+    -Wno-error=long-long for use on selective compile lines.
+
+    Added WNO_LONG_LONG makefile variable to hold the compiler flag
+    -Wno-long-long for use on selective compile lines.
+
+    The makefile variable ${MKDIR_ARG} has been replaced with just -p.
+
+    Minor fixes were made to the calc.spec.in file.
+
+    The target rpm architecture changed from i686 to x86_64.  For those
+    who do not run machine with x86_64, we continue to release a src
+    rpm. For those without the ability to process an rpm, we will always
+    to release src tarball.
+
+    When building the libcalc and libcustcalc shared  libraries,
+    ONLY the .so and .so.${VERSION} files are created.  The .so is
+    a symlink to the .so.${VERSION} file.  Here ${VERSION} is the
+    full "w.x.y.z" calc version.
+
+
+The following are the changes from calc version 2.12.4.11 to 2.12.4.13:
+
+    Fixed many typos in comments of the Makefile thanks to the review
+    work of Michael Somos.
+
+    Fixed typo in "help sysinfo".
+
+    The Makefile rule, debug, is now more verbose and prints more information
+    about the calc compiled constants.
+
+    Added a more of calc resource files by
+    Christoph Zurnieden <czurnieden at gmx dot de> including:
+
+    infinities.cal - handle infinities symbolically, a little helper file
+    intnum.cal - implementation of tanh sinh and Gauss-Legendre quadrature
+    smallfactors.cal - find the factors of a number < 2^32
+    strings.cal - implementation of isascii() and isblank()
+
+    Reformatted some calc resource files.  Cleanup in comment the headers
+    of some calc resource files.
+
+    Minor formatting changes to a few help files.
+
+    No need to be special picky about the test8900.cal calc resource file.
+
+    Added a number of ctype-like builtins:
+
+    isalnum - whether character is alpha-numeric
+    isalpha - whether character is alphabetic
+    iscntrl - whether character is a control character
+    isdigit - whether character is a digit character
+    isgraph - whether character is a graphical character
+    islower - whether character is lower case
+    isprint - whether character is a printable
+    ispunct - whether character is a punctuation
+    isspace - whether character is a space character
+    isupper - whether character is upper case
+    isxdigit - whether character a hexadecimal digit
+    strcasecmp - compare two strings, case independent
+    strncasecmp - compare two strings up to n characters, case independent
+    strtolower - transform an ASCII string to lower case
+    strtoupper - transform an ASCII string to upper case
+
+    For details on these new builtins, see their help messages.
+    Thanks goes to Inge Zurnieden <inge dot zurnieden at gmx dot de> for
+    these new builtins.
+
+    Calc source code is now picky v2.3 clean using:
+
+	picky -s -v file file2 ..
+
+    With the exception of:
+
+	help/errorcodes.sed
+	cal/set8700.line
+
+    Due to the long lines in those files, we use:
+
+	picky -w -s -v help/errorcodes.sed cal/set8700.line
+
+    For more information about the picky tool, see:
+
+	http://cis.csuohio.edu/~somos/picky.html
+
+    Removed functions from strings.cal that have been replaced by
+    the new ctype-like builtin functions.
+
+    Fixed cal/Makefile to include missing intnum.cal file.
+
+    Added detail_help_list make target to cal/Makefile.
+
+    The detaillist make target in help/Makefile is now
+    called detail_help_list.
+
+    Removed requirement of gen_u0(h, n, v1) in lucas.cal that h
+    be odd.  While still lucas(h, n) converts even h into an odd h
+    internally by incrementing n, gen_u0(h, n, v1) will output even
+    when h is even.
+
+
+The following are the changes from calc version 2.12.4.6 to version 2.12.4.10:
 
     Updated RPM build process to remove use of deprecated flags.
 
@@ -20,16 +276,16 @@ The following are the changes from calc version 2.12.4.6 to date:
     Added a number of calc resource files by
     Christoph Zurnieden <czurnieden at gmx dot de> including:
 
-    	bernpoly.cal - Computes the nth Bernoulli polynomial at z for any n,z
-	brentsolve.cal - root-finder implementwed with the Brent-Dekker trick
-	factorial.cal - product of the positive integers
-	factorial2.cal - variety of integer functions quasi-related to factoral
-	lambertw.cal - Computes Lambert's W-function at "z" at branch "branch"
-	lnseries.cal - Calculates a series of natural logarithms at 1,2,3,4...n
-	specialfunctions.cal - Calculates the value of the beta function
-	statistics.cal - a wide vareity of stastical functions
-	toomcook.cal - Multiply by way of the Toom-Cook algorithm
-	zeta2.cal - Calculate the value of the Hurwitz Zeta function
+    bernpoly.cal - Computes the nth Bernoulli polynomial at z for any n,z
+    brentsolve.cal - root-finder implementwed with the Brent-Dekker trick
+    factorial.cal - product of the positive integers
+    factorial2.cal - variety of integer functions quasi-related to factoral
+    lambertw.cal - Computes Lambert's W-function at "z" at branch "branch"
+    lnseries.cal - Calculates a series of natural logarithms at 1,2,3,4...n
+    specialfunctions.cal - Calculates the value of the beta function
+    statistics.cal - a wide vareity of stastical functions
+    toomcook.cal - Multiply by way of the Toom-Cook algorithm
+    zeta2.cal - Calculate the value of the Hurwitz Zeta function
 
     Fixed a makefile bug that prevented the those new calc resource
     files from being installed.
@@ -1216,8 +1472,7 @@ The following are the changes from calc version 2.11.10 to 2.11.10:
 The following are the changes from calc version 2.11.9 to 2.11.9.3:
 
     Fixed calc man page examples to move -f to the end of the line.
-    Thanks goes to Michael Somos <somos at grail dot cba dot csuohio
-    dot edu> for pointing this out.
+    Thanks goes to Michael Somos for pointing this out.
 
     Linux and gcc now compiled with -Wall -W -Wno-comment.
 
@@ -6865,7 +7120,7 @@ Following is a list of visible changes to calc from version 1.24.7 to 1.26.1:
 
     A small bug in the library file regress.cal was fixed.
 
-## Copyright (C) 2001  Landon Curt Noll
+## Copyright (C) 2001-2014  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -6881,8 +7136,8 @@ Following is a list of visible changes to calc from version 1.24.7 to 1.26.1:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 30.32 $
-## @(#) $Id: CHANGES,v 30.32 2013/08/11 09:10:11 chongo Exp $
+## @(#) $Revision: 30.49 $
+## @(#) $Id: CHANGES,v 30.49 2016/02/06 08:42:57 chongo Exp $
 ## @(#) $Source: /usr/local/src/bin/calc/RCS/CHANGES,v $
 ##
 ## Under source code control:	1993/06/02 18:12:57

COPYING

@@ -6,17 +6,17 @@ This file is Copyrighted
 
     This file is covered under the following Copyright:
 
-	Copyright (C) 1999-2008  Landon Curt Noll
+	Copyright (C) 1999-2014  Landon Curt Noll
 	All rights reserved.
 
 	Everyone is permitted to copy and distribute verbatim copies
 	of this license document, but changing it is not allowed.
 
-    # @(#) $Revision: 30.2 $
-    # @(#) $Id: COPYING,v 30.2 2008/10/24 10:46:52 chongo Exp $
+    # @(#) $Revision: 30.6 $
+    # @(#) $Id: COPYING,v 30.6 2014/10/12 12:23:43 chongo Exp $
     # @(#) $Source: /usr/local/src/bin/calc/RCS/COPYING,v $
 
-=-=
+-=-
 
 Calc is covered by the GNU Lesser General Public License
 --------------------------------------------------------
@@ -53,47 +53,64 @@ Calc is covered by the GNU Lesser General Public License
 	    Boston, MA  02110-1301
 	    USA
 
-    The contact addresses for calc is as follows:
+    To subscribe to the calc-tester mailing list, visit the following URL:
 
-	Web:	http://www.isthe.com/chongo/tech/comp/calc/email.html
+	    http://www.isthe.com/chongo/tech/comp/calc/calc-tester.html
 
-    To join the low volume calc mailing list.  Send a EMail message to:
+	This is a low volume moderated mailing list.
 
-	calc-tester-request at asthe dot com
+	This mailing list replaces calc-tester at asthe dot com list.
 
-    Your subject must contain the words:
+	If you need a human to help you with your mailing list subscription,
+	please send EMail to our special:
 
-	calc mailing list subscription
+	    calc-tester-maillist-help at asthe dot com
 
-    You may have additional words in your subject line.
+	    NOTE: Remove spaces and replace 'at' with @, 'dot' with .
 
-    Your message body (not the subject) should consist of:
+	address.  To be sure we see your EMail asking for help with your
+	mailing list subscription, please use the following phase in your
+	EMail Subject line:
 
-	 subscribe calc-tester address
-	 end
-	 name your_full_name
+	    calc tester mailing list help
 
-    where ``address'' is your EMail address and ``your_full_name'' is
-    your full name.
+	That phrase in your subject line will help ensure your
+	request will get past our anti-spam filters.  You may have
+	additional words in your subject line.
 
-    Feel free to follow the name line with additional EMail text as desired.
-
-=-=
+-=-
 
     Calc bug reports and calc bug fixes should be sent to:
 
-	calc-bugs at asthe dot com
+	    calc-bug-report at asthe dot com
 
-    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-    [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
+	    NOTE: Remove spaces and replace 'at' with @, 'dot' with .
 
-    Your subject must contain the words:
+	This replaces the old calc-bugs at asthe dot com address.
 
-	   calc bug report
+	To be sure we see your EMail reporting a calc bug, please use the
+	following phase in your EMail Subject line:
 
-    You may have additional words in your subject line.
+	    calc bug report
 
-=-=
+	That phrase in your subject line will help ensure your
+	request will get past our anti-spam filters.  You may have
+	additional words in your subject line.
+
+	However, you may find it more helpful to simply subscribe
+	to the calc-tester mailing list (see above) and then to
+	send your report to that mailing list as a wider set calc
+	testers may be able to help you.
+
+-=-
+
+    The calc web site is located at:
+
+	http://www.isthe.com/chongo/tech/comp/calc/
+
+    NOTE: The EMail address uses 'asthe', while the web site uses 'isthe'.
+
+-=-
 
 Calc's relationship to the GNU Lesser General Public License
 ------------------------------------------------------------
@@ -149,7 +166,7 @@ Calc's relationship to the GNU Lesser General Public License
      except for the exception files explicitly listed in the ``Calc
      copyrights and exception files'' section below.
 
-=-=
+-=-
 
 Calc copyrights and exception files
 -----------------------------------
@@ -165,6 +182,7 @@ Calc copyrights and exception files
 	Copyright (C) year  Ernest Bowen and Landon Curt Noll
 	Copyright (C) year  Ernest Bowen
 	Copyright (C) year  Petteri Kettunen and Landon Curt Noll
+	Copyright (C) year  Christoph Zurnieden
 
     These files are not covered under one of the Copyrights listed above:
 
@@ -188,7 +206,7 @@ Calc copyrights and exception files
     And because one may freely distribute the LGPL covered files, the
     entire calc source may be freely used and distributed.
 
-=-=
+-=-
 
 General Copyleft and License info
 ---------------------------------
@@ -202,7 +220,7 @@ General Copyleft and License info
 	http://www.gnu.org/copyleft/lesser.html
 	http://www.gnu.org/copyleft/lesser.txt
 
-=-=
+-=-
 
 Why calc did not use the GNU General Public License
 ---------------------------------------------------

COPYING-LGPL

@@ -485,7 +485,8 @@ convey the exclusion of warranty; and each file should have at least the
 
     You should have received a copy of the GNU Lesser General Public
     License along with this library; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301
+    USA
 
 Also add information on how to contact you by electronic and paper mail.
 

README

@@ -73,52 +73,64 @@ for a wish/todo list.  Code contributions are welcome.
 
 =-=
 
-To join the calc-tester mailing list.  Send an EMail message to:
+To subscribe to the calc-tester mailing list, visit the following URL:
 
-    calc-tester-request at asthe dot com
+	http://www.isthe.com/chongo/tech/comp/calc/calc-tester.html
 
-    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-    [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
+    This is a low volume moderated mailing list.
 
-Your subject must contain the words:
+    This mailing list replaces calc-tester at asthe dot com list.
 
-    calc mailing list subscription
+    If you need a human to help you with your mailing list subscription,
+    please send EMail to our special:
 
-You may have additional words in your subject line.
+	calc-tester-maillist-help at asthe dot com
 
-Your message body (not the subject) should consist of:
+	NOTE: Remove spaces and replace 'at' with @, 'dot' with .
 
-     subscribe calc-tester address
-     end
-     name your_full_name
+    address.  To be sure we see your EMail asking for help with your
+    mailing list subscription, please use the following phase in your
+    EMail Subject line:
 
-where ``address'' is your EMail address and ``your_full_name'' is
-your full name.
+	calc tester mailing list help
 
-Feel free to follow the name line with additional EMail text as desired.
+    That phrase in your subject line will help ensure your
+    request will get past our anti-spam filters.  You may have
+    additional words in your subject line.
 
-=-=
+-=-
 
-Send Calc bug and bug fixes to:
+Calc bug reports and calc bug fixes should be sent to:
 
-    calc-bugs at asthe dot com
+	calc-bug-report at asthe dot com
 
-    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-    [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
+	NOTE: Remove spaces and replace 'at' with @, 'dot' with .
 
-but see the BUGS file first.
+    This replaces the old calc-bugs at asthe dot com address.
 
-Your subject must contain the words:
+    To be sure we see your EMail reporting a calc bug, please use the
+    following phase in your EMail Subject line:
 
-       calc bug report
+	calc bug report
 
-You may have additional words in your subject line.
+    That phrase in your subject line will help ensure your
+    request will get past our anti-spam filters.  You may have
+    additional words in your subject line.
+
+    However, you may find it more helpful to simply subscribe
+    to the calc-tester mailing list (see above) and then to
+    send your report to that mailing list as a wider set calc
+    testers may be able to help you.
+
+-=-
 
 The calc web site is located at:
 
-	http://www.isthe.com/chongo/tech/comp/calc/
+    http://www.isthe.com/chongo/tech/comp/calc/
 
-## Copyright (C) 1999  Landon Curt Noll
+NOTE: The EMail address uses 'asthe', while the web site uses 'isthe'.
+
+## Copyright (C) 1999,2014  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -134,8 +146,8 @@ The calc web site is located at:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 30.1 $
-## @(#) $Id: README,v 30.1 2007/03/16 11:09:46 chongo Exp $
+## @(#) $Revision: 30.3 $
+## @(#) $Id: README,v 30.3 2014/10/12 12:23:43 chongo Exp $
 ## @(#) $Source: /usr/local/src/bin/calc/RCS/README,v $
 ##
 ## Under source code control:	1995/10/25 05:27:59

alloc.h

@@ -1,7 +1,7 @@
 /*
  * alloc - storage allocation and storage debug macros
  *
- * Copyright (C) 1999-2007  David I. Bell
+ * Copyright (C) 1999-2007,2014  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: alloc.h,v 30.3 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.5 $
+ * @(#) $Id: alloc.h,v 30.5 2014/08/24 21:56:51 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/RCS/alloc.h,v $
  *
  * Under source code control:	1990/02/15 01:48:29
@@ -28,8 +28,8 @@
  */
 
 
-#if !defined(__ALLOC_H__)
-#define __ALLOC_H__
+#if !defined(INCLUDE_ALLOC_H)
+#define INCLUDE_ALLOC_H
 
 
 #if defined(CALC_SRC)	/* if we are building from the calc source tree */
@@ -92,4 +92,4 @@ E_FUNC int strcmp();
 E_FUNC void *memmove(void *s1, CONST void *s2, MEMMOVE_SIZE_T n);
 #endif
 
-#endif /* !__ALLOC_H__ */
+#endif /* !INCLUDE_ALLOC_H */

assocfunc.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.2 $
- * @(#) $Id: assocfunc.c,v 30.2 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: assocfunc.c,v 30.3 2014/09/30 00:55:11 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/RCS/assocfunc.c,v $
  *
  * Under source code control:	1993/07/20 23:04:27
@@ -83,7 +83,7 @@ associndex(ASSOC *ap, BOOL create, long dim, VALUE *indices)
 	 * so that we can first select the correct hash chain, and
 	 * also so we can quickly compare each element for a match.
 	 */
-	hash = FNV1_32_BASIS;
+	hash = QUICKHASH_BASIS;
 	for (i = 0; i < dim; i++)
 		hash = hashvalue(&indices[i], hash);
 

blkcpy.h

@@ -1,7 +1,7 @@
 /*
  * blkcpy - general values and related routines used by the calculator
  *
- * Copyright (C) 1999-2007  Landon Curt Noll and Ernest Bowen
+ * Copyright (C) 1999-2007,2014  Landon Curt Noll and Ernest Bowen
  *
  * Primary author:  Landon Curt Noll
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: blkcpy.h,v 30.1 2007/03/16 11:09:46 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: blkcpy.h,v 30.3 2014/08/24 21:56:51 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/RCS/blkcpy.h,v $
  *
  * Under source code control:	1997/04/18 20:41:25
@@ -30,8 +30,8 @@
  */
 
 
-#if !defined(__BLKCPY_H__)
-#define __BLKCPY_H__
+#if !defined(INCLUDE_BLKCPY_H)
+#define INCLUDE_BLKCPY_H
 
 /*
  * the main copy gateway function
@@ -59,4 +59,4 @@ E_FUNC int copystr2blk(STRING *, long, long, BLOCK *, long, BOOL);
 E_FUNC int copystr2file(STRING *, long, long, FILEID, long);
 E_FUNC int copystr2str(STRING *, long, long, STRING *, long);
 
-#endif /* !__BLKCPY_H__ */
+#endif /* !INCLUDE_BLKCPY_H */

block.h

@@ -1,7 +1,7 @@
 /*
  * block - fixed, dynamic, fifo and circular memory blocks
  *
- * Copyright (C) 1999-2007  Landon Curt Noll and Ernest Bowen
+ * Copyright (C) 1999-2007,2014  Landon Curt Noll and Ernest Bowen
  *
  * Primary author:  Landon Curt Noll
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: block.h,v 30.1 2007/03/16 11:09:46 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: block.h,v 30.3 2014/08/24 21:56:51 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/RCS/block.h,v $
  *
  * Under source code control:	1997/02/21 05:03:39
@@ -31,8 +31,8 @@
  */
 
 
-#if !defined(__BLOCK_H__)
-#define __BLOCK_H__
+#if !defined(INCLUDE_BLOCK_H)
+#define INCLUDE_BLOCK_H
 
 
 /*
@@ -222,4 +222,4 @@ E_FUNC int countnblocks(void);
 E_FUNC void shownblocks(void);
 
 
-#endif /* !__BLOCK_H__ */
+#endif /* !INCLUDE_BLOCK_H */

byteswap.h

@@ -1,7 +1,7 @@
 /*
  * byteswap - byte swapping macros
  *
- * Copyright (C) 1999  Landon Curt Noll
+ * Copyright (C) 1999,2014  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: byteswap.h,v 30.1 2007/03/16 11:09:46 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: byteswap.h,v 30.3 2014/08/24 21:56:51 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/RCS/byteswap.h,v $
  *
  * Under source code control:	1995/10/11 04:44:01
@@ -29,8 +29,8 @@
  */
 
 
-#if !defined(__BYTESWAP_H__)
-#define __BYTESWAP_H__
+#if !defined(INCLUDE_BYTESWAP_H)
+#define INCLUDE_BYTESWAP_H
 
 
 #if defined(CALC_SRC)	/* if we are building from the calc source tree */
@@ -178,4 +178,4 @@
 #endif /* LONG_BITS == 64 */
 
 
-#endif /* !__BYTESWAP_H__ */
+#endif /* !INCLUDE_BYTESWAP_H */

cal/Makefile

@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.7 $
-# @(#) $Id: Makefile,v 30.7 2013/08/11 09:07:26 chongo Exp $
+# @(#) $Revision: 30.11 $
+# @(#) $Id: Makefile,v 30.11 2014/09/02 07:14:49 chongo Exp $
 # @(#) $Source: /usr/local/src/bin/calc/cal/RCS/Makefile,v $
 #
 # Under source code control:	1991/07/21 05:00:54
@@ -179,19 +179,32 @@ MV= mv
 CO= co
 TRUE= true
 TOUCH= touch
+SED= sed
+SORT= sort
+FMT= fmt
 
 # The calc files to install
 #
-CALC_FILES= alg_config.cal beer.cal bernoulli.cal bernpoly.cal \
-	bigprime.cal bindings brentsolve.cal chi.cal chrem.cal constants.cal \
-	deg.cal dms.cal dotest.cal ellip.cal factorial2.cal factorial.cal \
-	gvec.cal hello.cal hms.cal intfile.cal lambertw.cal linear.cal \
-	lnseries.cal lucas.cal lucas_chk.cal lucas_tbl.cal mersenne.cal \
-	mfactor.cal mod.cal natnumset.cal pell.cal pi.cal pix.cal pollard.cal \
-	poly.cal prompt.cal psqrt.cal qtime.cal quat.cal randbitrun.cal \
-	randmprime.cal randombitrun.cal randomrun.cal randrun.cal README \
-	regress.cal repeat.cal screen.cal seedrandom.cal set8700.cal \
-	set8700.line solve.cal specialfunctions.cal statistics.cal sumsq.cal \
+# This list is prodiced by the detaillist rule when no WARNINGS are detected.
+#
+# Please use:
+#
+#	make calc_files_list
+#
+# to keep this list in nice sorted order and to check that these
+# deailed help files are under RCS control.
+#
+CALC_FILES= README alg_config.cal beer.cal bernoulli.cal \
+	bernpoly.cal bigprime.cal bindings brentsolve.cal chi.cal chrem.cal \
+	constants.cal deg.cal dms.cal dotest.cal ellip.cal factorial.cal \
+	factorial2.cal gvec.cal hello.cal hms.cal infinities.cal \
+	intfile.cal intnum.cal lambertw.cal linear.cal lnseries.cal \
+	lucas.cal lucas_chk.cal lucas_tbl.cal mersenne.cal mfactor.cal \
+	mod.cal natnumset.cal pell.cal pi.cal pix.cal pollard.cal poly.cal \
+	prompt.cal psqrt.cal qtime.cal quat.cal randbitrun.cal randmprime.cal \
+	randombitrun.cal randomrun.cal randrun.cal regress.cal repeat.cal \
+	screen.cal seedrandom.cal set8700.cal set8700.line smallfactors.cal \
+	solve.cal specialfunctions.cal statistics.cal strings.cal sumsq.cal \
 	sumtimes.cal surd.cal test1700.cal test2300.cal test2600.cal \
 	test2700.cal test3100.cal test3300.cal test3400.cal test3500.cal \
 	test4000.cal test4100.cal test4600.cal test5100.cal test5200.cal \
@@ -244,6 +257,27 @@ calcliblist:
 	    fi; \
 	done
 
+# These next rule help form the ${CALC_FILES} makefile variables above.
+#
+calc_files_list:
+	${Q} -(find .  -mindepth 1 -maxdepth 1 -type f -name '*.cal' -print | \
+	   while read i; do \
+		if [ X"$$i" != X"/dev/null" ]; then \
+		    if [ ! -f RCS/$$i,v ]; then \
+			echo "WARNING: $$i not under RCS control" 1>&2; \
+		    else \
+			echo $$i; \
+		    fi; \
+		fi; \
+	done; \
+	echo '--first_line--'; \
+	echo README; \
+	echo set8700.line; \
+	echo bindings) | \
+	    ${SED} -e 's:^\./::' | LANG=C ${SORT} | ${FMT} -70 | \
+	    ${SED} -e '1s/--first_line--/CALC_FILES=/' -e '2,$$s/^/	/' \
+		   -e 's/$$/ \\/' -e '$$s/ \\$$//'
+
 ##
 #
 # rpm rules
@@ -274,8 +308,8 @@ clobber: clean
 #
 install: all
 	-${Q} if [ ! -d ${T}${CALC_SHAREDIR} ]; then \
-	    echo ${MKDIR} ${T}${CALC_SHAREDIR}; \
-	    ${MKDIR} ${T}${CALC_SHAREDIR}; \
+	    echo ${MKDIR} -p ${T}${CALC_SHAREDIR}; \
+	    ${MKDIR} -p ${T}${CALC_SHAREDIR}; \
 	    if [ ! -d "${T}${CALC_SHAREDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CALC_SHAREDIR}"; \
 		${MKDIR} -p "${T}${CALC_SHAREDIR}"; \

cal/README

@@ -35,12 +35,44 @@ Calc resource file files are provided because they serve as examples of
 how use the calc language, and/or because the authors thought them to
 be useful!
 
-If you write something that you think is useful, please send it to:
+If you write something that you think is useful, please join the
+low volume calc mailing list calc-tester.  Then send your contribution
+to the calc-tester mailing list.
 
-    calc-contrib at asthe dot com
+To subscribe to the calc-tester mailing list, visit the following URL:
 
-    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-    [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
+	https://www.listbox.com/subscribe/?list_id=239342
+
+    To help determine you are a human and not just a spam bot,
+    you will be required to provide the following additional info:
+
+	Your Name
+	Calc Version
+	Operating System
+	The date 7 days ago
+
+    This is a low volume moderated mailing list.
+
+    This mailing list replaces calc-tester at asthe dot com list.
+
+    If you need a human to help you with your mailing list subscription,
+    please send EMail to our special:
+
+	calc-tester-maillist-help at asthe dot com
+
+	NOTE: Remove spaces and replace 'at' with @, 'dot' with .
+
+    address.  To be sure we see your EMail asking for help with your
+    mailing list subscription, please use the following phase in your
+    EMail Subject line:
+
+	calc tester mailing list help
+
+    That phrase in your subject line will help ensure your
+    request will get past our anti-spam filters.  You may have
+    additional words in your subject line.
+
+=-=
 
 By convention, a resource file only defines and/or initializes functions,
 objects and variables.	(The regress.cal and testxxx.cal regression test
@@ -537,6 +569,20 @@ hms.cal
     Calculate in hours, minutes, and seconds.  See also dmscal.
 
 
+infinities.cal
+
+    isinfinite(x)
+    iscinf(x)
+    ispinf(x)
+    isninf(x)
+    cinf()
+    ninf()
+    pinf()
+
+    The symbolic handling of infinities. Needed for intnum.cal but might be
+    usefull elsewhere, too.
+
+
 intfile.cal
 
     file2be(filename)
@@ -564,6 +610,127 @@ intfile.cal
 	of the integer become the last octets of the file.
 
 
+intnum.cal
+
+    quadtsdeletenodes()
+    quadtscomputenodes(order, expo, eps)
+    quadtscore(a, b, n)
+    quadts(a, b, points)
+    quadglcomputenodes(N)
+    quadgldeletenodes()
+    quadglcore(a, b, n)
+    quadgl(a, b, points)
+    quad(a, b, points = -1, method = "tanhsinh")
+    makerange(start, end, steps)
+    makecircle(radius, center, points)
+    makeellipse(angle, a, b, center, points)
+    makepoints()
+
+    This file offers some methods for numerical integration. Implemented are
+    the Gauss-Legendre and the tanh-sinh quadrature.
+
+    All functions are usefull to some extend but the main function for
+    quadrature is quad(), which is not much more than an abstraction layer.
+
+    The main workers are quadgl() for Gauss-legendre and quadts() for the
+    tanh-sinh quadrature. The limits of the integral can be anything in the
+    complex plane and the extended real line. The latter means that infinite
+    limits are supported by way of the smbolic infinities implemented in the
+    file infinities.cal (automatically linked in by intnum.cal).
+
+    Integration in parts and contour is supported by the "points" argument
+    which takes either a number or a list. the functions starting with "make"
+    allow for a less error prone use.
+
+    The function to evaluate must have the name "f".
+
+    Examples (shamelessly stolen from mpmath):
+
+        ; define f(x){return sin(x);}
+        f(x) defined
+        ; quadts(0,pi())  -  2
+	    0.00000000000000000000
+        ; quadgl(0,pi())  -  2
+	    0.00000000000000000000
+
+    Sometimes rounding errors accumulate, it might be a good idea to crank up
+    the working precision a notch or two.
+
+        ; define f(x){ return exp(-x^2);}
+        f(x) redefined
+        ; quadts(0,pinf())  - pi()
+	    0.00000000000000000000
+        ; quadgl(0,pinf())  - pi()
+	    0.00000000000000000001
+
+        ; define f(x){ return exp(-x^2);}
+        f(x) redefined
+        ; quadgl(ninf(),pinf()) - sqrt(pi())
+	    0.00000000000000000000
+        ; quadts(ninf(),pinf()) - sqrt(pi())
+	   -0.00000000000000000000
+
+    Using the "points" parameter is a bit tricky
+
+        ; define f(x){ return 1/x;  }
+        f(x) redefined
+        ; quadts(1,1,mat[3]={1i,-1,-1i})  -  2i*pi()
+	    0.00000000000000000001i
+        ; quadgl(1,1,mat[3]={1i,-1,-1i})  -  2i*pi()
+	    0.00000000000000000001i
+
+    The make* functions make it a bit simpler
+
+        ; quadts(1,1,makepoints(1i,-1,-1i))  -  2i*pi()
+	    0.00000000000000000001i
+        ; quadgl(1,1,makepoints(1i,-1,-1i))  -  2i*pi()
+	    0.00000000000000000001i
+
+        ; define f(x){ return abs(sin(x));}
+        f(x) redefined
+        ; quadts(0,2*pi(),makepoints(pi()))  - 4
+	    0.00000000000000000000
+        ; quadgl(0,2*pi(),makepoints(pi()))  - 4
+	    0.00000000000000000000
+
+    The quad*core functions do not offer anything fancy but the third parameter
+    controls the so called "order" which is just the number of nodes computed.
+    This can be quite usefull in some circumstances.
+
+        ; quadgldeletenodes()
+        ; define f(x){ return exp(x);}
+        f(x) redefined
+        ; s=usertime();quadglcore(-3,3)- (exp(3)-exp(-3));e=usertime();e-s
+	    0.00000000000000000001
+	    2.632164
+        ; s=usertime();quadglcore(-3,3)- (exp(3)-exp(-3));e=usertime();e-s
+	    0.00000000000000000001
+	    0.016001
+        ; quadgldeletenodes()
+        ; s=usertime();quadglcore(-3,3,14)- (exp(3)-exp(-3));e=usertime();e-s
+	   -0.00000000000000000000
+	    0.024001
+        ; s=usertime();quadglcore(-3,3,14)- (exp(3)-exp(-3));e=usertime();e-s
+	   -0.00000000000000000000
+	    0
+
+    It is not much but can sum up. The tanh-sinh algorithm is not optimizable
+    as much as the Gauss-Legendre algorithm but is per se much faster.
+
+        ; s=usertime();quadtscore(-3,3)- (exp(3)-exp(-3));e=usertime();e-s
+	    -0.00000000000000000001
+	     0.128008
+        ; s=usertime();quadtscore(-3,3)- (exp(3)-exp(-3));e=usertime();e-s
+	    -0.00000000000000000001
+	     0.036002
+        ; s=usertime();quadtscore(-3,3,49)- (exp(3)-exp(-3));e=usertime();e-s
+	    -0.00000000000000000000
+	     0.036002
+        ; s=usertime();quadtscore(-3,3,49)- (exp(3)-exp(-3));e=usertime();e-s
+	    -0.00000000000000000000
+	     0.01200
+
+
 lambertw.cal
 
      lambertw(z,branch)
@@ -988,6 +1155,15 @@ set8700.line
     The set8700.cal file (and dotest.cal) should be read first.
 
 
+smallfactors.cal
+
+    smallfactors(x0)
+    printsmallfactors(flist)
+
+    Lists the prime factors of numbers smaller than 2^32. Try for example:
+    printsmallfactors(smallfactors(10!)).
+
+
 solve.cal
 
     solve(low, high, epsilon)
@@ -1236,6 +1412,21 @@ statistics.cal
     Calculates a bunch of (hopefully) aptly named statistical functions.
 
 
+strings.cal
+
+    isascii(c)
+    isblank(c)
+
+    Implements some of the functions of libc's ctype.h and strings.h.
+
+    NOTE: A number of the ctype.h and strings.h functions are now builtin
+          functions in calc.
+
+   WARNING: If the remaining functions in this calc resource file become
+	    calc builtin functions, then strings.cal may be removed in
+	    a future release.
+
+
 sumsq.cal
 
     ss(p)
@@ -1607,7 +1798,7 @@ zeta2.cal
     for information on this special zeta function.
 
 
-## Copyright (C) 2000  David I. Bell and Landon Curt Noll
+## Copyright (C) 2000,2014  David I. Bell and Landon Curt Noll
 ##
 ## Primary author: Landon Curt Noll
 ##
@@ -1625,9 +1816,9 @@ zeta2.cal
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 30.5 $
-## @(#) $Id: README,v 30.5 2013/08/11 03:26:46 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/README,v $
+## @(#) $Revision: 30.9 $
+## @(#) $Id: README,v 30.9 2014/10/06 08:44:18 chongo Exp $
+## @(#) $Source: /usr/local/src/bin/calc/cal/RCS/README,v $
 ##
 ## Under source code control:	1990/02/15 01:50:32
 ## File existed as early as:	before 1990

cal/alg_config.cal

@@ -1,7 +1,7 @@
 /*
  * alg_config - help determine optimal values for algorithm levels
  *
- * Copyright (C) 2006  Landon Curt Noll
+ * Copyright (C) 2006,2014  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.2 $
- * @(#) $Id: alg_config.cal,v 30.2 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.12 $
+ * @(#) $Id: alg_config.cal,v 30.12 2016/02/06 08:38:56 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cal/RCS/alg_config.cal,v $
  *
  * Under source code control:	2006/06/07 14:10:11
@@ -28,8 +28,37 @@
  * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
+static test_time;	/* try for this many seconds in loop test */
 
-global test_time;	/* try for this many seconds in loop test */
+
+/*
+ * close_to_one - set to 1 if the ratio is close enough to 1
+ *
+ * given:
+ *	ratio	the ratio of time between two algorithms
+ *
+ * retuns:
+ *	1	When ratio is near 1.0
+ *	0	otherwise
+ *
+ * We consider the range [0.995, 1.005] to be close enough to 1 to be call unity
+ * because of the precision of the CPU timing.
+ */
+define close_to_one(ratio)
+{
+    /* firewall */
+    if (!isreal(ratio)) {
+	quit "close: 1st arg: must be a real number";
+    }
+
+    /* check if the ratio is far from unity */
+    if ((ratio < 0.995) || (ratio > 1.005)) {
+	return 0;
+    }
+
+    /* we are close to unity */
+    return 1;
+}
 
 
 /*
@@ -143,7 +172,7 @@ define mul_loop(repeat, x)
  *	len	length in BASEB-bit words to multiply
  *
  * return:
- *	ratio of (1st / 2nd) algorithm rate
+ *	ratio of (1st / 2nd) algorithm rate.
  *
  * When want to determine a rate to a precision of 1 part in 1000.
  * Most systems today return CPU time to at least 10 msec precision.
@@ -166,6 +195,7 @@ define mul_ratio(len)
     local tover;		/* est of time for loop overhead */
     local alg1_rate;		/* loop rate of 1st algorithm */
     local alg2_rate;		/* loop rate of 2nd algorithm */
+    local ret;			/* return ratio, or 1.0 */
     local i;
 
     /*
@@ -218,12 +248,12 @@ define mul_ratio(len)
      * determine the 1st algorithm rate
      */
     loops = max(1, ceil(loops * test_time / tlen));
-    if (loops < 8) {
+    if (loops < 16) {
 	if (config("user_debug") > 1) {
-	    printf("    we must expand loop test time to more than %d secs\n",
-		ceil(test_time * (8 / loops)));
+	    printf("    we must expand alg1 loop test time to about %d secs\n",
+		ceil(test_time * (16 / loops)));
 	}
-	loops = 8;
+	loops = 16;
     }
     if (config("user_debug") > 3) {
 	printf("\t    will try alg1 %d loops\n", loops);
@@ -264,12 +294,12 @@ define mul_ratio(len)
      * determine the 2nd algorithm rate
      */
     loops = max(1, ceil(loops * test_time / tlen));
-    if (loops < 8) {
+    if (loops < 16) {
 	if (config("user_debug") > 1) {
-	    printf("    we must expand loop test time to more than %d secs\n",
-		ceil(test_time * (8 / loops)));
+	    printf("    we must expand alg2 loop test time to about %d secs\n",
+		ceil(test_time * (16 / loops)));
 	}
-	loops = 8;
+	loops = 16;
     }
     tlen = mul_loop(loops, &x);
     if (config("user_debug") > 3) {
@@ -298,7 +328,12 @@ define mul_ratio(len)
     /*
      * return alg1 / alg2 rate ratio
      */
-    return (alg1_rate / alg2_rate);
+    ret = alg1_rate / alg2_rate;
+    if (config("user_debug") > 2) {
+	printf("\tprecise ratio is: %.f mul_ratio will return: %.3f\n",
+		alg1_rate / alg2_rate, ret);
+    }
+    return ret;
 }
 
 
@@ -320,30 +355,40 @@ define best_mul2()
 {
     local ratio;	/* previously calculated alg1/alg2 ratio */
     local low;		/* low loop value tested */
-    local high;		/* low loop value tested */
+    local high;		/* high loop value tested */
+    local mid;		/* between low and high */
+    local best_val;	/* value found with ratio closest to unity */
+    local best_ratio;	/* cloest ratio found to unity */
     local expand;	/* how fast to expand the length */
 
     /*
      * setup
      */
-    test_time = 15.0;
-    if (config("user_debug") > 0) {
-	printf("will start with loop test time of %d secs\n", test_time);
+    printf("WARNING: This tool may not be computing the correct best value\n");
+    test_time = 5.0;
+    printf("The best_mul2() function will take a LONG time to run!\n");
+    printf("It is important that best_mul2() run on an othwewise idle host!\n");
+    if (config("user_debug") <= 0) {
+	printf("To monitor progress, set user_debug to 2: "
+	       "config(\"user_debug\", 2)\n");
     }
+    printf("Starting with loop test time of %d secs\n", test_time);
 
     /*
      * firewall - must have a >1 ratio for the initial length
      */
-    high = 16;
+    high = 8;
+    best_val = high;
     if (config("user_debug") > 0) {
 	printf("testing multiply alg1/alg2 ratio for len = %d\n", high);
     }
     ratio = mul_ratio(high);
+    best_ratio = ratio;
     if (config("user_debug") > 1) {
-	printf("    multiply alg1/alg2 ratio = %.3f\n", ratio);
+	printf("    multiply alg1/alg2 ratio = %.6f\n", ratio);
     }
-    if (ratio <= 1.0) {
-	quit "best_mul2: tests imply config(\"mul2\") should be < 4";
+    if (ratio < 1.0) {
+	quit "best_mul2: tests imply mul2 should be < 16, which seems bogus";
     }
 
     /*
@@ -356,7 +401,7 @@ define best_mul2()
 	 * We will multiplicatively expand our test level until
 	 * the ratio drops below 1.0.
 	 */
-	expand = ((ratio >= 3.5) ? 16 : 2^round(ratio));
+	expand = 2;
 	low = high;
 	high *= expand;
 	if (config("user_debug") > 1) {
@@ -368,20 +413,63 @@ define best_mul2()
 	 * determine the alg1/alg2 test ratio for this new length
 	 */
 	if (high >= 2^31) {
-	    quit "best_mul2: tests imply config(\"mul2\") should be >= 2^31";
+	    quit "best_mul2: test implies mul2 >= 2^31, which seems bogus";
 	}
 	if (config("user_debug") > 0) {
 	    printf("testing multiply alg1/alg2 ratio for len = %d\n", high);
 	}
 	ratio = mul_ratio(high);
-	if (config("user_debug") > 1) {
-	    printf("    multiply alg1/alg2 ratio = %.3f\n", ratio);
+	if (abs(ratio - 1.0) < abs(best_ratio - 1.0)) {
+	    best_val = high;
+	    best_ratio = ratio;
+	    if (config("user_debug") > 1) {
+		printf("    len %d has a new cloest ratio to unity: %.6f\n",
+		       best_val, best_ratio);
+	    }
 	}
-    } while (ratio >= 1.0);
+	if (config("user_debug") > 1) {
+	    printf("    multiply alg1/alg2 ratio = %.6f\n", ratio);
+	}
+    } while (ratio > 1.0);
+
+    /*
+     * If we previously expanded more than by a factor of 2, then
+     * we may have jumped over the crossover point.  So now
+     * drop down powers of two until the ratio is again >= 1.0
+     */
+    if (expand > 2) {
+	do {
+
+	    /*
+	     * contract by 2
+	     */
+	    high /= 2;
+	    low = high / 2;
+	    if (config("user_debug") > 0) {
+		printf("retesting multiply alg1/alg2 ratio for len = %d\n",
+		       high);
+	    }
+	    ratio = mul_ratio(high);
+	    if (abs(ratio - 1.0) < abs(best_ratio - 1.0)) {
+		best_val = high;
+		best_ratio = ratio;
+		if (config("user_debug") > 1) {
+		    printf("    len %d has a new cloest ratio to unity: %.6f\n",
+			   best_val, best_ratio);
+		}
+	    }
+	    if (config("user_debug") > 1) {
+		printf("    multiply alg1/alg2 ratio = %.6f\n", ratio);
+	    }
+
+	} while (ratio <= 1.0);
+
+	/* now that the ratio flipped again, use the previous range */
+	low = high;
+	high = high * 2;
+    }
     if (config("user_debug") > 0) {
-	printf("alg1/alg2 ratio now < 1.0, starting binary search "
-	       "between %d and %d\n",
-	    low, high);
+	printf("Starting binary search between %d and %d\n", low, high);
     }
 
     /*
@@ -390,30 +478,54 @@ define best_mul2()
     while (low+1 < high) {
 
     	/* try the mid-point */
+	mid = int((low+high)/2);
 	if (config("user_debug") > 0) {
-	    printf("testing multiply alg1/alg2 ratio for len = %d\n",
-	    	int((low+high)/2));
+	    printf("testing multiply alg1/alg2 ratio for len = %d\n", mid);
+	}
+	ratio = mul_ratio(mid);
+	if (abs(ratio - 1.0) < abs(best_ratio - 1.0)) {
+	    best_val = mid;
+	    best_ratio = ratio;
+	    if (config("user_debug") > 1) {
+		printf("    len %d has a new cloest ratio to unity: %.6f\n",
+		       best_val, best_ratio);
+	    }
 	}
-	ratio = mul_ratio(int((low+high)/2));
 	if (config("user_debug") > 1) {
-	    printf("    multiply alg1/alg2 ratio = %.3f\n", ratio);
+	    printf("    len %d multiply alg1/alg2 ratio = %.6f\n", mid, ratio);
+	}
+
+	/* stop search if near unity */
+	if (close_to_one(ratio)) {
+	    low = mid;
+	    high = mid;
+	    if (config("user_debug") > 0) {
+	    	printf("\twe are close enough to unity ratio at: %d\n", mid);
+	    }
+	    break;
 	}
 
 	/* bump lower range up if we went over */
-	if (ratio >= 1.0) {
+	if (ratio > 1.0) {
 	    if (config("user_debug") > 2) {
 	    	printf("\tmove low from %d up to %d\n",
-		    low, int((low+high)/2));
+		    low, mid);
 	    }
-	    low = int((low+high)/2);
+	    low = mid;
 
 	/* drop higher range down if we went under */
 	} else {
 	    if (config("user_debug") > 2) {
 	    	printf("\tmove high from %d down to %d\n",
-		     high, int((low+high)/2));
+		     high, mid);
 	    }
-	    high = int((low+high)/2);
+	    high = mid;
+	}
+
+	/* report on test loop progress */
+	if (config("user_debug") > 1) {
+	    printf("\tsetting low: %d high: %d diff: %d\n",
+	    	   low, high, high-low);
 	}
     }
 
@@ -421,10 +533,15 @@ define best_mul2()
      * return on the suggested config("mul2") value
      */
     if (config("user_debug") > 0) {
-	printf("best value of config(\"mul2\") is %d\n",
-	    (ratio >= 1.0) ? high : low);
+	printf("Best value for multiply is near %d\n", best_val);
+	printf("Best multiply alg1/alg2 ratio is: %.6f\n", best_ratio);
+	printf("We suggest placing this line in your .calcrc:\n");
+	printf("config(\"mul2\", %d),;\n", best_val);
+	printf("WARNING: It is believed that the output "
+	       "of this resource file is bogus!\n");
+	printf("WARNING: You may NOT wish to follow the above suggeston.\n");
     }
-    return ((ratio >= 1.0) ? high : low);
+    return mid;
 }
 
 
@@ -562,6 +679,7 @@ define sq_ratio(len)
     local tover;		/* est of time for loop overhead */
     local alg1_rate;		/* loop rate of 1st algorithm */
     local alg2_rate;		/* loop rate of 2nd algorithm */
+    local ret;			/* return ratio, or 1.0 */
     local i;
 
     /*
@@ -614,12 +732,12 @@ define sq_ratio(len)
      * determine the 1st algorithm rate
      */
     loops = max(1, ceil(loops * test_time / tlen));
-    if (loops < 8) {
+    if (loops < 16) {
 	if (config("user_debug") > 1) {
-	    printf("    we must expand loop test time to more than %d secs\n",
-		ceil(test_time * (8 / loops)));
+	    printf("    we must expand alg1 loop test time to about %d secs\n",
+		ceil(test_time * (16 / loops)));
 	}
-	loops = 8;
+	loops = 16;
     }
     tlen = sq_loop(loops, &x);
     if (config("user_debug") > 3) {
@@ -657,12 +775,12 @@ define sq_ratio(len)
      * determine the 2nd algorithm rate
      */
     loops = max(1, ceil(loops * test_time / tlen));
-    if (loops < 8) {
+    if (loops < 16) {
 	if (config("user_debug") > 1) {
-	    printf("    we must expand loop test time to more than %d secs\n",
-		ceil(test_time * (8 / loops)));
+	    printf("    we must expand alg2 loop test time to about %d secs\n",
+		ceil(test_time * (16 / loops)));
 	}
-	loops = 8;
+	loops = 16;
     }
     tlen = sq_loop(loops, &x);
     if (config("user_debug") > 3) {
@@ -691,7 +809,12 @@ define sq_ratio(len)
     /*
      * return alg1 / alg2 rate ratio
      */
-    return (alg1_rate / alg2_rate);
+    ret = alg1_rate / alg2_rate;
+    if (config("user_debug") > 2) {
+	printf("\tprecise ratio is: %.f sq_ratio will return: %.3f\n",
+		alg1_rate / alg2_rate, ret);
+    }
+    return ret;
 }
 
 
@@ -713,30 +836,40 @@ define best_sq2()
 {
     local ratio;	/* previously calculated alg1/alg2 ratio */
     local low;		/* low loop value tested */
-    local high;		/* low loop value tested */
+    local high;		/* high loop value tested */
+    local mid;		/* between low and high */
+    local best_val;	/* value found with ratio closest to unity */
+    local best_ratio;	/* cloest ratio found to unity */
     local expand;	/* how fast to expand the length */
 
     /*
      * setup
      */
-    test_time = 15.0;
-    if (config("user_debug") > 0) {
-	printf("will start with loop test time of %d secs\n", test_time);
+    printf("WARNING: This tool may not be computing the correct best value\n");
+    test_time = 5.0;
+    printf("The best_sq2() function will take a LONG time to run!\n");
+    printf("It is important that best_sq2() run on an othwewise idle host!\n");
+    if (config("user_debug") <= 0) {
+	printf("To monitor progress, set user_debug to 2: "
+	       "config(\"user_debug\", 2)\n");
     }
+    printf("Starting with loop test time of %d secs\n", test_time);
 
     /*
      * firewall - must have a >1 ratio for the initial length
      */
-    high = 16;
+    high = 8;
+    best_val = high;
     if (config("user_debug") > 0) {
 	printf("testing square alg1/alg2 ratio for len = %d\n", high);
     }
     ratio = sq_ratio(high);
+    best_ratio = ratio;
     if (config("user_debug") > 1) {
 	printf("    square alg1/alg2 ratio = %.3f\n", ratio);
     }
-    if (ratio <= 1.0) {
-	quit "best_sq2: tests imply config(\"sq2\") should be < 4";
+    if (ratio < 1.0) {
+	quit "best_sq2: test implies sq2 < 16, which seems bogus";
     }
 
     /*
@@ -749,32 +882,75 @@ define best_sq2()
 	 * We will multiplicatively expand our test level until
 	 * the ratio drops below 1.0.
 	 */
-	expand = ((ratio >= 3.5) ? 16 : 2^round(ratio));
+	expand = 2;
 	low = high;
 	high *= expand;
 	if (config("user_debug") > 1) {
 	    printf("    expand the next test range by a factor of %d\n",
-	           expand);
+	    	   expand);
 	}
 
 	/*
 	 * determine the alg1/alg2 test ratio for this new length
 	 */
 	if (high >= 2^31) {
-	    quit "best_sq2: tests imply config(\"sq2\") should be >= 2^31";
+	    quit "best_sq2: tests imply sq2 >= 2^31, which seems bogus";
 	}
 	if (config("user_debug") > 0) {
 	    printf("testing square alg1/alg2 ratio for len = %d\n", high);
 	}
 	ratio = sq_ratio(high);
+	if (abs(ratio - 1.0) < abs(best_ratio - 1.0)) {
+	    best_val = high;
+	    best_ratio = ratio;
+	    if (config("user_debug") > 1) {
+		printf("    len %d has a new cloest ratio to unity: %.6f\n",
+		       best_val, best_ratio);
+	    }
+	}
 	if (config("user_debug") > 1) {
 	    printf("    square alg1/alg2 ratio = %.3f\n", ratio);
 	}
-    } while (ratio >= 1.0);
+    } while (ratio > 1.0);
+
+    /*
+     * If we previously expanded more than by a factor of 2, then
+     * we may have jumped over the crossover point.  So now
+     * drop down powers of two until the ratio is again >= 1.0
+     */
+    if (expand > 2) {
+	do {
+
+	    /*
+	     * contract by 2
+	     */
+	    high /= 2;
+	    low = high / 2;
+	    if (config("user_debug") > 0) {
+		printf("retesting multiply alg1/alg2 ratio for len = %d\n",
+		       high);
+	    }
+	    ratio = mul_ratio(high);
+	    if (abs(ratio - 1.0) < abs(best_ratio - 1.0)) {
+		best_val = high;
+		best_ratio = ratio;
+		if (config("user_debug") > 1) {
+		    printf("    len %d has a new cloest ratio to unity: %.6f\n",
+			   best_val, best_ratio);
+		}
+	    }
+	    if (config("user_debug") > 1) {
+		printf("    multiply alg1/alg2 ratio = %.6f\n", ratio);
+	    }
+
+	} while (ratio <= 1.0);
+
+	/* now that the ratio flipped again, use the previous range */
+	low = high;
+	high = high * 2;
+    }
     if (config("user_debug") > 0) {
-	printf("alg1/alg2 ratio now < 1.0, starting binary search "
-	        "between %d and %d\n",
-	    low, high);
+	printf("Starting binary search between %d and %d\n", low, high);
     }
 
     /*
@@ -783,41 +959,71 @@ define best_sq2()
     while (low+1 < high) {
 
     	/* try the mid-point */
+	mid = int((low+high)/2);
 	if (config("user_debug") > 0) {
-	    printf("testing square alg1/alg2 ratio for len = %d\n",
-	    	int((low+high)/2));
+	    printf("testing square alg1/alg2 ratio for len = %d\n", mid);
+	}
+	ratio = sq_ratio(mid);
+	if (abs(ratio - 1.0) < abs(best_ratio - 1.0)) {
+	    best_val = mid;
+	    best_ratio = ratio;
+	    if (config("user_debug") > 1) {
+		printf("    len %d has a new cloest ratio to unity: %.6f\n",
+		       best_val, best_ratio);
+	    }
 	}
-	ratio = sq_ratio(int((low+high)/2));
 	if (config("user_debug") > 1) {
-	    printf("    square alg1/alg2 ratio = %.3f\n", ratio);
+	    printf("    len %d square alg1/alg2 ratio = %.6f\n", mid, ratio);
+	}
+
+	/* stop search if near unity */
+	if (close_to_one(ratio)) {
+	    low = mid;
+	    high = mid;
+	    if (config("user_debug") > 0) {
+	    	printf("\twe are close enough to unity ratio at: %d\n", mid);
+	    }
+	    break;
 	}
 
 	/* bump lower range up if we went over */
-	if (ratio >= 1.0) {
+	if (ratio > 1.0) {
 	    if (config("user_debug") > 2) {
 	    	printf("\tmove low from %d up to %d\n",
-		    low, int((low+high)/2));
+		    low, mid);
 	    }
-	    low = int((low+high)/2);
+	    low = mid;
 
 	/* drop higher range down if we went under */
 	} else {
 	    if (config("user_debug") > 2) {
 	    	printf("\tmove high from %d down to %d\n",
-		     high, int((low+high)/2));
+		     high, mid);
 	    }
-	    high = int((low+high)/2);
+	    high = mid;
+	}
+
+	/* report on test loop progress */
+	if (config("user_debug") > 1) {
+	    printf("\tsetting low: %d high: %d diff: %d\n",
+	    	   low, high, high-low);
 	}
     }
 
     /*
      * return on the suggested config("sq2") value
      */
+    mid = int((low+high)/2);
     if (config("user_debug") > 0) {
-	printf("best value of config(\"sq2\") is %d\n",
-	    (ratio >= 1.0) ? high : low);
+	printf("Best value for square is near %d\n", best_val);
+	printf("Best square alg1/alg2 ratio is: %.6f\n", best_ratio);
+	printf("We suggest placing this line in your .calcrc:\n");
+	printf("config(\"sq2\", %d),;\n", best_val);
+	printf("WARNING: It is believed that the output "
+	       "of this resource file is bogus!\n");
+	printf("WARNING: You may NOT wish to follow the above suggeston.\n");
     }
-    return ((ratio >= 1.0) ? high : low);
+    return mid;
 }
 
 
@@ -968,6 +1174,7 @@ define pow_ratio(len)
     local alg1_rate;		/* loop rate of 1st algorithm */
     local alg2_rate;		/* loop rate of 2nd algorithm */
     local ex;			/* exponent to use in pow_loop() */
+    local ret;			/* return ratio, or 1.0 */
     local i;
 
     /*
@@ -990,7 +1197,7 @@ define pow_ratio(len)
     /*
      * setup
      */
-    ex = 5;
+    ex = 7;
 
     /*
      * initialize x, the values we will pmod
@@ -1026,12 +1233,12 @@ define pow_ratio(len)
      * determine the 1st algorithm rate
      */
     loops = max(1, ceil(loops * test_time / tlen));
-    if (loops < 8) {
+    if (loops < 16) {
 	if (config("user_debug") > 1) {
-	    printf("    we must expand loop test time to more than %d secs\n",
-		ceil(test_time * (8 / loops)));
+	    printf("    we must expand alg1 loop test time to about %d secs\n",
+		ceil(test_time * (16 / loops)));
 	}
-	loops = 8;
+	loops = 16;
     }
     tlen = pow_loop(loops, &x, ex);
     if (config("user_debug") > 3) {
@@ -1070,12 +1277,12 @@ define pow_ratio(len)
      * determine the 2nd algorithm rate
      */
     loops = max(1, ceil(loops * test_time / tlen));
-    if (loops < 8) {
+    if (loops < 16) {
 	if (config("user_debug") > 1) {
-	    printf("    we must expand loop test time to more than %d secs\n",
-		ceil(test_time * (8 / loops)));
+	    printf("    we must expand alg2 loop test time to about %d secs\n",
+		ceil(test_time * (16 / loops)));
 	}
-	loops = 8;
+	loops = 16;
     }
     tlen = pow_loop(loops, &x, ex);
     if (config("user_debug") > 3) {
@@ -1104,7 +1311,12 @@ define pow_ratio(len)
     /*
      * return alg1 / alg2 rate ratio
      */
-    return (alg1_rate / alg2_rate);
+    ret = alg1_rate / alg2_rate;
+    if (config("user_debug") > 2) {
+	printf("\tprecise ratio is: %.f pow_ratio will return: %.3f\n",
+		alg1_rate / alg2_rate, ret);
+    }
+    return ret;
 }
 
 
@@ -1126,17 +1338,25 @@ define best_pow2()
 {
     local ratio;	/* previously calculated alg1/alg2 ratio */
     local low;		/* low loop value tested */
-    local high;		/* low loop value tested */
+    local high;		/* high loop value tested */
+    local mid;		/* between low and high */
+    local best_val;	/* value found with ratio closest to unity */
+    local best_ratio;	/* cloest ratio found to unity */
     local expand;	/* how fast to expand the length */
     local looped;	/* 1 ==> we have expanded lengths before */
 
     /*
      * setup
      */
-    test_time = 15.0;
-    if (config("user_debug") > 0) {
-	printf("will start with loop test time of %d secs\n", test_time);
+    printf("WARNING: This tool may not be computing the correct best value\n");
+    test_time = 60.0;
+    printf("The best_pow2() function will take a LONG time to run!\n");
+    printf("It is important that best_pow2() run on an othwewise idle host!\n");
+    if (config("user_debug") <= 0) {
+	printf("To monitor progress, set user_debug to 2: "
+	       "config(\"user_debug\", 2)\n");
     }
+    printf("Starting with loop test time of %d secs\n", test_time);
 
     /*
      * firewall - must have a >1.02 ratio for the initial length
@@ -1147,12 +1367,22 @@ define best_pow2()
      */
     low = 4;
     high = 4;
+    best_val = high;
+    best_ratio = 1e10;	/* not a real value */
     do {
 	high *= 4;
 	if (config("user_debug") > 0) {
 	    printf("testing pmod alg1/alg2 ratio for len = %d\n", high);
 	}
 	ratio = pow_ratio(high);
+	if (abs(ratio - 1.0) < abs(best_ratio - 1.0)) {
+	    best_val = high;
+	    best_ratio = ratio;
+	    if (config("user_debug") > 1) {
+		printf("    len %d has a new cloest ratio to unity: %.6f\n",
+		       best_val, best_ratio);
+	    }
+	}
 	if (config("user_debug") > 1) {
 	    printf("    pmod alg1/alg2 ratio = %.3f\n", ratio);
 	    if (ratio > 1.0 && ratio <= 1.02) {
@@ -1199,20 +1429,27 @@ define best_pow2()
 	 * determine the alg1/alg2 test ratio for this new length
 	 */
 	if (high >= 2^31) {
-	    quit "best_pow2: tests imply config(\"pow2\") should be >= 2^31";
+	    quit "best_pow2: test implies pow2 >= 2^31, which seems bogus";
 	}
 	if (config("user_debug") > 0) {
 	    printf("testing pmod alg1/alg2 ratio for len = %d\n", high);
 	}
 	ratio = pow_ratio(high);
+	if (abs(ratio - 1.0) < abs(best_ratio - 1.0)) {
+	    best_val = high;
+	    best_ratio = ratio;
+	    if (config("user_debug") > 1) {
+		printf("    len %d has a new cloest ratio to unity: %.6f\n",
+		       best_val, best_ratio);
+	    }
+	}
 	if (config("user_debug") > 1) {
-	    printf("    pmod alg1/alg2 ratio = %.3f\n", ratio);
+	    printf("    pmod alg1/alg2 ratio = %.6f\n", ratio);
 	}
 	looped = 1;
-    } while (ratio >= 1.0);
+    } while (ratio > 1.0);
     if (config("user_debug") > 0) {
-	printf("alg1/alg2 ratio now < 1.0, starting binary search "
-	       "between %d and %d\n", low, high);
+	printf("Starting binary search between %d and %d\n", low, high);
     }
 
     /*
@@ -1221,39 +1458,69 @@ define best_pow2()
     while (low+1 < high) {
 
     	/* try the mid-point */
+	mid = int((low+high)/2);
 	if (config("user_debug") > 0) {
-	    printf("testing pmod alg1/alg2 ratio for len = %d\n",
-	    	int((low+high)/2));
+	    printf("testing pow2 alg1/alg2 ratio for len = %d\n", mid);
+	}
+	ratio = pow_ratio(mid);
+	if (abs(ratio - 1.0) < abs(best_ratio - 1.0)) {
+	    best_val = mid;
+	    best_ratio = ratio;
+	    if (config("user_debug") > 1) {
+		printf("    len %d has a new cloest ratio to unity: %.6f\n",
+		       best_val, best_ratio);
+	    }
 	}
-	ratio = pow_ratio(int((low+high)/2));
 	if (config("user_debug") > 1) {
-	    printf("    pmod alg1/alg2 ratio = %.3f\n", ratio);
+	    printf("    len %d pmod alg1/alg2 ratio = %.6f\n", mid, ratio);
+	}
+
+	/* stop search if near unity */
+	if (close_to_one(ratio)) {
+	    low = mid;
+	    high = mid;
+	    if (config("user_debug") > 0) {
+	    	printf("\twe are close enough to unity ratio at: %d\n", mid);
+	    }
+	    break;
 	}
 
 	/* bump lower range up if we went over */
-	if (ratio >= 1.0) {
+	if (ratio > 1.0) {
 	    if (config("user_debug") > 2) {
 	    	printf("\tmove low from %d up to %d\n",
-		    low, int((low+high)/2));
+		    low, mid);
 	    }
-	    low = int((low+high)/2);
+	    low = mid;
 
 	/* drop higher range down if we went under */
 	} else {
 	    if (config("user_debug") > 2) {
 	    	printf("\tmove high from %d down to %d\n",
-		     high, int((low+high)/2));
+		     high, mid);
 	    }
-	    high = int((low+high)/2);
+	    high = mid;
+	}
+
+	/* report on test loop progress */
+	if (config("user_debug") > 1) {
+	    printf("\tsetting low: %d high: %d diff: %d\n",
+	    	   low, high, high-low);
 	}
     }
 
     /*
      * return on the suggested config("pow2") value
      */
+    mid = int((low+high)/2);
     if (config("user_debug") > 0) {
-	printf("best value of config(\"pow2\") is %d\n",
-	    (ratio >= 1.0) ? high : low);
+	printf("Best value for pmod is near %d\n", best_val);
+	printf("Best pmod alg1/alg2 ratio is: %.6f\n", best_ratio);
+	printf("We suggest placing this line in your .calcrc:\n");
+	printf("config(\"pow2\", %d),;\n", best_val);
+	printf("WARNING: It is believed that the output "
+	       "of this resource file is bogus!\n");
+	printf("WARNING: You may NOT wish to follow the above suggeston.\n");
     }
-    return ((ratio >= 1.0) ? high : low);
+    return mid;
 }

cal/bernpoly.cal

@@ -1,13 +1,13 @@
 /*
- *  bernpoly- Bernoully polynomials B_n(z) for arbitrary n,z..
+ * bernpoly - Bernoully polynomials B_n(z) for arbitrary n,z..
  *
  * Copyright (C) 2013 Christoph Zurnieden
  *
- * bernpoly is open software; you can redistribute it and/or modify it under
+ * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
  * as published by the Free Software Foundation.
  *
- * bernpoly is distributed in the hope that it will be useful, but WITHOUT
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
  * Public License for more details.
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: bernpoly.cal,v 30.3 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: bernpoly.cal,v 30.4 2013/08/18 20:01:53 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cal/RCS/bernpoly.cal,v $
  *
  * Under source code control:	2013/08/11 01:31:28

cal/brentsolve.cal

@@ -1,13 +1,13 @@
 /*
- *  brentsolve- Root finding with the Brent-Dekker trick.
+ * brentsolve - Root finding with the Brent-Dekker trick
  *
  * Copyright (C) 2013 Christoph Zurnieden
  *
- * brentsolve is open software; you can redistribute it and/or modify it under
+ * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
  * as published by the Free Software Foundation.
  *
- * brentsolve is distributed in the hope that it will be useful, but WITHOUT
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
  * Public License for more details.
@@ -17,14 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: brentsolve.cal,v 30.3 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: brentsolve.cal,v 30.4 2013/08/18 20:01:53 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cal/RCS/brentsolve.cal,v $
  *
  * Under source code control:	2013/08/11 01:31:28
  * File existed as early as:	2013
  */
 
+
 static resource_debug_level;
 resource_debug_level = config("resource_debug", 0);
 

cal/constants.cal

@@ -3,11 +3,11 @@
  *
  * Copyright (C) 2013 Christoph Zurnieden
  *
- * constants is open software; you can redistribute it and/or modify it under
+ * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
  * as published by the Free Software Foundation.
  *
- * constants is distributed in the hope that it will be useful, but WITHOUT
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
  * Public License for more details.
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: constants.cal,v 30.3 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: constants.cal,v 30.4 2013/08/18 20:01:53 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cal/RCS/constants.cal,v $
  *
  * Under source code control:	2013/08/11 01:31:28

cal/factorial.cal

@@ -3,11 +3,11 @@
  *
  * Copyright (C) 2013 Christoph Zurnieden
  *
- * factorial is open software; you can redistribute it and/or modify it under
+ * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
  * as published by the Free Software Foundation.
  *
- * factorial is distributed in the hope that it will be useful, but WITHOUT
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
  * Public License for more details.
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: factorial.cal,v 30.3 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: factorial.cal,v 30.4 2013/08/18 20:01:53 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cal/RCS/factorial.cal,v $
  *
  * Under source code control:	2013/08/11 01:31:28

cal/factorial2.cal

@@ -3,22 +3,22 @@
  *
  * Copyright (C) 2013 Christoph Zurnieden
  *
- * factorial2 is open software; you can redistribute it and/or modify it under
+ * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
  * as published by the Free Software Foundation.
  *
- * factorial2 is distributed in the hope that it will be useful, but WITHOUT
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
  * Public License for more details.
  *
  * A copy of version 2.1 of the GNU Lesser General Public License is
- * distributed with factorial2 under the filename COPYING-LGPL.  You should have
+ * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: factorial2.cal,v 30.3 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: factorial2.cal,v 30.4 2013/08/18 20:01:53 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cal/RCS/factorial2.cal,v $
  *
  * Under source code control:	2013/08/11 01:31:28

cal/infinities.cal

@@ -0,0 +1,88 @@
+/*
+ * infinities - handle infinities symbolically, a little helper file
+ *
+ * Copyright (C) 2013 Christoph Zurnieden
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+
+static resource_debug_level;
+resource_debug_level = config("resource_debug", 0);
+
+
+define isinfinite(x)
+{
+    if (isstr(x)) {
+	if (strncmp(x, "cinf", 4) == 0
+	    || strncmp(x, "pinf", 4) == 0 || strncmp(x, "ninf", 4) == 0)
+	    return 1;
+    }
+    return 0;
+}
+
+define iscinf(x)
+{
+    if (isstr(x)) {
+	if (strncmp(x, "cinf", 4) == 0)
+	    return 1;
+    }
+    return 0;
+}
+
+define ispinf(x)
+{
+    if (isstr(x)) {
+	if (strncmp(x, "pinf", 4) == 0)
+	    return 1;
+    }
+    return 0;
+}
+
+define isninf(x)
+{
+    if (isstr(x)) {
+	if (strncmp(x, "ninf", 4) == 0)
+	    return 1;
+    }
+    return 0;
+}
+
+define cinf()
+{
+    return "cinf";
+}
+
+define ninf()
+{
+    return "ninf";
+}
+
+define pinf()
+{
+    return "pinf";
+}
+
+
+config("resource_debug", resource_debug_level),;
+if (config("resource_debug") & 3) {
+    print "isinfinite(x)";
+    print "iscinf(x)";
+    print "ispinf(x)";
+    print "isninf(x)";
+    print "cinf()";
+    print "ninf()";
+    print "pinf()";
+}

cal/intnum.cal

@@ -0,0 +1,728 @@
+/*
+ * intnum - implementation of tanhsinh- and Gauss-Legendre quadrature
+ *
+ * Copyright (C) 2013 Christoph Zurnieden
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+
+static resource_debug_level;
+resource_debug_level = config("resource_debug", 0);
+
+
+read -once infinities;
+
+static __CZ__tanhsinh_x;
+static __CZ__tanhsinh_w;
+static __CZ__tanhsinh_order;
+static __CZ__tanhsinh_prec;
+
+define quadtsdeletenodes()
+{
+    free(__CZ__tanhsinh_x);
+    free(__CZ__tanhsinh_w);
+    free(__CZ__tanhsinh_order);
+    free(__CZ__tanhsinh_prec);
+}
+
+define quadtscomputenodes(order, expo, eps)
+{
+    local t cht sht chp sum k PI places;
+    local h t0 x w;
+    if (__CZ__tanhsinh_order == order && __CZ__tanhsinh_prec == eps)
+	return 1;
+    __CZ__tanhsinh_order = order;
+    __CZ__tanhsinh_prec = eps;
+    __CZ__tanhsinh_x = list();
+    __CZ__tanhsinh_w = list();
+    /* The tanhsinh algorithm needs a slightly higher precision than G-L */
+    eps = epsilon(eps * 1e-2);
+    places = highbit(1 + int (1 / epsilon())) +1;
+    PI = pi();
+    sum = 0;
+    t0 = 2 ^ (-expo);
+    h = 2 * t0;
+    /*
+     * The author wanted to use the mpmath trick here which was
+     * advertised---and reasonably so!---to be faster. Didn't work out
+     * so well with calc.
+     * PI4 = PI/4;
+     * expt0 = bround(exp(t0),places);
+     * a = bround( PI4 * expt0,places);
+     * b = bround(PI4 / expt0,places);
+     * udelta = bround(exp(h),places);
+     * urdelta = bround(1/udelta,places);
+     */
+    /* make use of x(-t) = -x(t), w(-t) = w(t)  */
+    for (k = 0; k < 20 * order + 1; k++) {
+	/*
+	 * x = tanh(pi/2 * sinh(t))
+	 * w = pi/2 * cosh(t) / cosh(pi/2 * sinh(t))^2
+	 */
+	t = bround(t0 + k * h, places);
+
+	cht = bround(cosh(t), places);
+	sht = bround(sinh(t), places);
+	chp = bround(cosh(0.5 * PI * sht), places);
+	x = bround(tanh(0.5 * PI * sht), places);
+	w = bround((PI * h * cht) / (2 * chp ^ 2), places);
+	/*
+	 * c = bround(exp(a-b),places);
+	 * d = bround(1/c,places);
+	 * co =bround( (c+d)/2,places);
+	 * si =bround( (c-d)/2,places);
+	 * x = bround(si / co,places);
+	 * w = bround((a+b) / co^2,places);
+	 */
+	if (abs(x - 1) <= eps)
+	    break;
+
+	append(__CZ__tanhsinh_x, x);
+	append(__CZ__tanhsinh_w, w);
+	/*
+	 * a *= udelta;
+	 * b *= urdelta;
+	 */
+    }
+
+    /* Normalize the weights to make them add up to 2 (two) */
+    /*
+     * for(k=0;k < size(__CZ__tanhsinh_w);k++)
+     * sum = bround(sum + __CZ__tanhsinh_w[k],places);
+     * sum *= 2;
+     * for(k=0;k < size(__CZ__tanhsinh_w);k++)
+     * __CZ__tanhsinh_w[k] = bround(2.0 * __CZ__tanhsinh_w[k] / sum,places);
+     */
+
+    epsilon(eps);
+    return 1;
+}
+
+define quadtscore(a, b, n)
+{
+    local k c d order eps places sum ret x x1 x2 xm w w1 w2 m sizel;
+
+    eps = epsilon(epsilon() * 1e-2);
+    places = highbit(1 + int (1 / epsilon())) +1;
+    m = int (4 + max(0, ln(places / 30.0) / ln(2))) + 2;
+    if (!isnull(n)) {
+	order = n;
+	m = ilog(order / 3, 2) + 1;
+    } else
+	order = 3 * 2 ^ (m - 1);
+
+    quadtscomputenodes(order, m, epsilon());
+    sizel = size(__CZ__tanhsinh_w);
+
+    if (isinfinite(a) || isinfinite(b)) {
+	/*
+	 *           x
+	 * t =  ------------
+	 *                2
+	 *      sqrt(1 - y )
+	 */
+	if (isninf(a) && ispinf(b)) {
+	    for (k = 0; k < sizel; k++) {
+		x1 = __CZ__tanhsinh_x[k];
+		x2 = -__CZ__tanhsinh_x[k];
+		w1 = __CZ__tanhsinh_w[k];
+
+		x = bround(x1 * (1 - x1 ^ 2) ^ (-1 / 2), places);
+		xm = bround(x2 * (1 - x2 ^ 2) ^ (-1 / 2), places);
+		w = bround(w1 * (((1 - x1 ^ 2) ^ (-1 / 2)) / (1 - x1 ^ 2)),
+			   places);
+		w2 = bround(w1 * (((1 - x2 ^ 2) ^ (-1 / 2)) / (1 - x2 ^ 2)),
+			    places);
+		sum += bround(w * f(x), places);
+		sum += bround(w2 * f(xm), places);
+	    }
+	}
+	/*
+	 *        1
+	 * t =  - - + b + 1
+	 *        x
+	 */
+	else if (isninf(a) && !iscinf(b)) {
+	    for (k = 0; k < sizel; k++) {
+		x1 = __CZ__tanhsinh_x[k];
+		x2 = -__CZ__tanhsinh_x[k];
+		w1 = __CZ__tanhsinh_w[k];
+
+		x = bround((b + 1) - (2 / (x1 + 1)), places);
+		xm = bround((b + 1) - (2 / (x2 + 1)), places);
+		w = bround(w1 * (1 / 2 * (2 / (x1 + 1)) ^ 2), places);
+		w2 = bround(w1 * (1 / 2 * (2 / (x2 + 1)) ^ 2), places);
+		sum += bround(w * f(x), places);
+		sum += bround(w2 * f(xm), places);
+	    }
+	}
+	/*
+	 *      1
+	 * t =  - + a - 1
+	 *      x
+	 */
+	else if (!iscinf(a) && ispinf(b)) {
+	    for (k = 0; k < sizel; k++) {
+		x1 = __CZ__tanhsinh_x[k];
+		x2 = -__CZ__tanhsinh_x[k];
+		w1 = __CZ__tanhsinh_w[k];
+		x = bround((a - 1) + (2 / (x1 + 1)), places);
+		xm = bround((a - 1) + (2 / (x2 + 1)), places);
+		w = bround(w1 * (((1 / 2) * (2 / (x1 + 1)) ^ 2)), places);
+		w2 = bround(w1 * (((1 / 2) * (2 / (x2 + 1)) ^ 2)), places);
+		sum += bround(w * f(x), places);
+		sum += bround(w2 * f(xm), places);
+	    }
+	} else if (isninf(a) || isninf(b)) {
+	    /*TODO: swap(a,b) and negate(w)? Lookup! */
+	    return newerror("quadtscore: reverse limits?");
+	} else {
+	    return
+		newerror("quadtscore: complex infinity not yet implemented");
+        }
+	ret = sum;
+    } else {
+	/* Avoid rounding errors */
+	if (a == -1 && b == 1) {
+	    c = 1;
+	    d = 0;
+	} else {
+	    c = (b - a) / 2;
+	    d = (b + a) / 2;
+	}
+	sum = 0;
+	for (k = 0; k < sizel; k++) {
+	    sum +=
+		bround(__CZ__tanhsinh_w[k] * f(c * __CZ__tanhsinh_x[k] + d),
+		       places);
+	    sum +=
+		bround(__CZ__tanhsinh_w[k] * f(c * -__CZ__tanhsinh_x[k] + d),
+		       places);
+	}
+	ret = c * sum;
+    }
+    epsilon(eps);
+    return ret;
+}
+
+static __CZ__quadts_error;
+
+define quadts(a, b, points)
+{
+    local k sp results epsbits nsect interval length segment slope C ;
+    local x1 x2 y1 y2  sum D1 D2 D3 D4;
+    if (param(0) < 2)
+	return newerror("quadts: not enough arguments");
+    epsbits = highbit(1 + int (1 / epsilon())) +1;
+    if (param(0) < 3 || isnull(points)) {
+	/* return as given */
+	return quadtscore(a, b);
+    } else {
+	if ((isinfinite(a) || isinfinite(b))
+	    && (!ismat(points) && !islist(points)))
+	    return
+		newerror(strcat
+			 ("quadts: segments of infinite length ",
+			  "are not yet supported"));
+	if (ismat(points) || islist(points)) {
+	    sp = size(points);
+	    if (sp == 0)
+		return
+		    newerror(strcat
+			     ("quadts: variable 'points` must be a list or ",
+			      "1d-matrix of a length > 0"));
+	    /* check if all points are numbers */
+	    for (k = 0; k < sp; k++) {
+		if (!isnum(points[k]))
+		    return
+			newerror(strcat
+				 ("quadts: elements of 'points` must be",
+				  " numbers only"));
+	    }
+	    /* We have n-1 intervals and a and b, hence n-1 + 2 results */
+	    results = mat[sp + 1];
+            if (a != points[0]) {
+	        results[0] = quadtscore(a, points[0]);
+            } else {
+                results[0] = 0;
+            }
+	    if (sp == 1) {
+                if (b != points[0]) {
+		    results[1] = quadtscore(points[0], b);
+                } else {
+                    results[1] = 0;
+                }
+	    } else {
+		for (k = 1; k < sp; k++) {
+		    results[k] = quadtscore(points[k - 1], points[k]);
+		}
+                if (b != points[k - 1]) {
+		    results[k] = quadtscore(points[k - 1], b);
+                } else {
+                    results[k] = 0;
+                }
+	    }
+	} else {
+	    if (!isint(points) || points <= 0)
+		return newerror(strcat("quadts: variable 'points` must be a ",
+				       "list or a positive integer"));
+	    /* Taking "points" as the number of equally spaced intervals */
+	    results = mat[points + 1];
+	    /* It is easy if a,b lie on the real line */
+	    if (isreal(a) && isreal(b)) {
+		length = abs(a - b);
+		segment = length / points;
+
+		for (k = 1; k <= points; k++) {
+		    results[k - 1] =
+			quadtscore(a + (k - 1) * segment, a + k * segment);
+		}
+	    } else {
+		/* We have at least one complex limit but treat "points" still
+                 * as the number of equally spaced intervals on a straight line
+                 * connecting a and b. Computing the segments here is a bit
+                 * more complicated but not much, it should have been taught in
+                 * highschool.
+		 * Other contours by way of a list of points */
+		slope = (im(b) - im(a)) / (re(b) - re(a));
+		C = (im(a) + slope) * re(a);
+		length = abs(re(a) - re(b));
+		segment = length / points;
+
+		/* y = mx+C where m is the slope, x is the real part and y the
+		 * imaginary part  */
+                if(re(a)>re(b))swap(a,b);
+		for (k = re(a); k <= (re(b)); k+=segment) {
+		    x1 = slope*(k) +  C;
+		    results[k] = quadtscore(k + x1 * 1i);
+		}
+	    }			/* else of isreal */
+	}			/* else of ismat|islist */
+    }				/* else of isnull(points) */
+    /* With a bit of undeserved luck we have a result by now. */
+    sp = size(results);
+    for (k = 0; k < sp; k++) {
+	sum += results[k];
+    }
+    return sum;
+}
+
+static __CZ__gl_x;
+static __CZ__gl_w;
+static __CZ__gl_order;
+static __CZ__gl_prec;
+
+define quadglcomputenodes(N)
+{
+    local places k l x w t1 t2 t3 t4 t5 r tmp;
+
+    if (__CZ__gl_order == N && __CZ__gl_prec == epsilon())
+	return;
+
+    __CZ__gl_x = mat[N];
+    __CZ__gl_w = mat[N];
+    __CZ__gl_order = N;
+    __CZ__gl_prec = epsilon();
+
+    places = highbit(1 + int (1 / epsilon())) +1;
+
+    /*
+     * Compute roots and weights (doing it inline seems to be fastest)
+     * Trick shamelessly stolen from D. Bailey et .al (program "arprec")
+     */
+    for (k = 1; k <= N//2; k++) {
+	r = bround(cos(pi() * (k - .25) / (N + .5)), places);
+	while (1) {
+	    t1 = 1, t2 = 0;
+	    for (l = 1; l <= N; l++) {
+		t3 = t2;
+		t2 = t1;
+		t1 = bround(((2 * l - 1) * r * t2 - (l - 1) * t3) / l, places);
+	    }
+	    t4 = bround(N * (r * t1 - t2) / ((r ^ 2) - 1), places);
+	    t5 = r;
+	    tmp = t1 / t4;
+	    r = r - tmp;
+	    if (abs(tmp) <= epsilon())
+		break;
+	}
+	x = r;
+	w = bround(2 / ((1 - r ^ 2) * t4 ^ 2), places);
+
+	__CZ__gl_x[k - 1] = x;
+	__CZ__gl_w[k - 1] = w;
+	__CZ__gl_x[N - k] = -__CZ__gl_x[k - 1];
+	__CZ__gl_w[N - k] = __CZ__gl_w[k - 1];
+    }
+    return;
+}
+
+define quadgldeletenodes()
+{
+    free(__CZ__gl_x);
+    free(__CZ__gl_w);
+    free(__CZ__gl_order);
+    free(__CZ__gl_prec);
+}
+
+define quadglcore(a, b, n)
+{
+    local k c d digs order eps places sum ret err x x1 w w1 m;
+    local phalf x2 px1 spx1 u b1 a1 half;
+
+    eps = epsilon(epsilon() * 1e-2);
+    places = highbit(1 + int (1 / epsilon())) +1;
+    if (!isnull(n))
+	order = n;
+    else {
+	m = int (4 + max(0, ln(places / 30.0) / ln(2))) + 2;
+	order = 3 * 2 ^ (m - 1);
+    }
+
+
+    quadglcomputenodes(order, 1);
+
+    if (isinfinite(a) || isinfinite(b)) {
+	if (isninf(a) && ispinf(b)) {
+	    for (k = 0; k < order; k++) {
+		x1 = __CZ__gl_x[k];
+		w1 = __CZ__gl_w[k];
+
+		x = bround(x1 * (1 - x1 ^ 2) ^ (-1 / 2), places);
+		w = bround(w1 * (((1 - x1 ^ 2) ^ (-1 / 2)) / (1 - x1 ^ 2)),
+			   places);
+		sum += bround(w * f(x), places);
+	    }
+	} else if (isninf(a) && !iscinf(b)) {
+	    for (k = 0; k < order; k++) {
+		x1 = __CZ__gl_x[k];
+		w1 = __CZ__gl_w[k];
+
+		x = bround((b + 1) - (2 / (x1 + 1)), places);
+		w = bround(w1 * (1 / 2 * (2 / (x1 + 1)) ^ 2), places);
+		sum += bround(w * f(x), places);
+	    }
+	} else if (!iscinf(a) && ispinf(b)) {
+	    for (k = 0; k < order; k++) {
+		x1 = __CZ__gl_x[k];
+		w1 = __CZ__gl_w[k];
+		x = bround((a - 1) + (2 / (x1 + 1)), places);
+		w = bround(w1 * (((1 / 2) * (2 / (x1 + 1)) ^ 2)), places);
+		sum += bround(w * f(x), places);
+	    }
+	} else if (isninf(a) || isninf(b)) {
+	    /*TODO: swap(a,b) and negate(w)? Lookup! */
+	    return newerror("quadglcore: reverse limits?");
+	} else
+	    return
+		newerror("quadglcore: complex infinity not yet implemented");
+	ret = sum;
+    } else {
+	/* Avoid rounding errors */
+	if (a == -1 && b == 1) {
+	    c = 1;
+	    d = 0;
+	} else {
+	    c = (b - a) / 2;
+	    d = (b + a) / 2;
+	}
+	sum = 0;
+	for (k = 0; k < order; k++) {
+	    sum += bround(__CZ__gl_w[k] * f(c * __CZ__gl_x[k] + d), places);
+	}
+	ret = c * sum;
+    }
+    epsilon(eps);
+    return ret;
+}
+
+define quadgl(a, b, points)
+{
+    local k sp results epsbits nsect interval length segment slope C x1 y1 x2
+	y2;
+    local sum D1 D2 D3 D4;
+    if (param(0) < 2)
+	return newerror("quadgl: not enough arguments");
+    epsbits = highbit(1 + int (1 / epsilon())) +1;
+    if (isnull(points)) {
+	/* return as given */
+	return quadglcore(a, b);
+    } else {
+	/* But if we could half the time needed to execute a single operation
+	 * we could do all of it in just twice that time. */
+	if (isinfinite(a) || isinfinite(b)
+	    && (!ismat(points) && !islist(points)))
+	    return
+		newerror(strcat
+			 ("quadgl: multiple segments of infinite length ",
+			  "are not yet supported"));
+	if (ismat(points) || islist(points)) {
+	    sp = size(points);
+	    if (sp == 0)
+		return
+		    newerror(strcat
+			     ("quadgl: variable 'points` must be a list or ",
+			      "1d-matrix of a length > 0"));
+	    /* check if all points are numbers */
+	    for (k = 0; k < sp; k++) {
+		if (!isnum(points[k]))
+		    return
+			newerror(strcat
+				 ("quadgl: elements of 'points` must be ",
+				  "numbers only"));
+	    }
+	    /* We have n-1 intervals and a and b, hence n-1 + 2 results */
+	    results = mat[sp + 1];
+            if (a != points[0]) {
+	        results[0] = quadglcore(a, points[0]);
+            } else {
+                results[0] = 0;
+            }
+	    if (sp == 1) {
+		if (b != points[0]) {
+		    results[1] = quadglcore(points[0], b);
+                } else {
+                    results[1] = 0;
+                }
+	    } else {
+		for (k = 1; k < sp; k++) {
+		    results[k] = quadglcore(points[k - 1], points[k]);
+		}
+                if (b != points[k - 1]) {
+		    results[k] = quadglcore(points[k - 1], b);
+                } else {
+                    results[k] = 0;
+                }
+	    }
+	} else {
+	    if (!isint(points) || points <= 0)
+		return newerror(strcat("quadgl: variable 'points` must be a ",
+				       "list or a positive integer"));
+	    /* Taking "points" as the number of equally spaced intervals */
+	    results = mat[points + 1];
+	    /* It is easy if a,b lie on the real line */
+	    if (isreal(a) && isreal(b)) {
+		length = abs(a - b);
+		segment = length / points;
+
+		for (k = 1; k <= points; k++) {
+		    results[k - 1] =
+			quadglcore(a + (k - 1) * segment, a + k * segment);
+		}
+	    } else {
+		/* Other contours by way of a list of points */
+		slope = (im(b) - im(a)) / (re(b) - re(a));
+		C = (im(a) + slope) * re(a);
+		length = abs(re(a) - re(b));
+		segment = length / points;
+
+		/* y = mx+C where m is the slope, x is the real part and y the
+		 * imaginary part  */
+                if(re(a)>re(b))swap(a,b);
+		for (k = re(a); k <= (re(b)); k+=segment) {
+		    x1 = slope*(k) +  C;
+		    results[k] = quadglcore(k + x1 * 1i);
+		}
+	    }			/* else of isreal */
+	}			/* else of ismat|islist */
+    }				/* else of isnull(points) */
+    /* With a bit of undeserved luck we have a result by now. */
+    sp = size(results);
+    for (k = 0; k < sp; k++) {
+	sum += results[k];
+    }
+    return sum;
+}
+
+define quad(a, b, points = -1, method = "tanhsinh")
+{
+    if (isnull(a) || isnull(b) || param(0) < 2)
+	return newerror("quad: both limits must be given");
+    if (isstr(a)) {
+	if (strncmp(a, "cinf", 1) == 0)
+	    return
+		newerror(strcat
+			 ("quad: complex infinity not yet supported, use",
+			  " 'pinf' or 'ninf' respectively"));
+    }
+    if (isstr(b)) {
+	if (strncmp(b, "cinf", 1) == 0)
+	    return
+		newerror(strcat
+			 ("quad: complex infinity not yet supported, use",
+			  " 'pinf' or 'ninf' respectively"));
+    }
+
+    if (param(0) == 3) {
+	if (isstr(points))
+	    method = points;
+    }
+
+    if (strncmp(method, "tanhsinh", 1) == 0) {
+	if (!isstr(points)) {
+	    if (points == -1) {
+		return quadts(a, b);
+	    } else {
+		return quadts(a, b, points);
+	    }
+	} else {
+	    return quadts(a, b);
+	}
+    }
+
+    if (strncmp(method, "gausslegendre", 1) == 0) {
+	if (!isstr(points)) {
+	    if (points == -1) {
+		return quadgl(a, b);
+	    } else {
+		return quadgl(a, b, points);
+	    }
+	} else {
+	    return quadgl(a, b);
+	}
+    }
+}
+
+define makerange(start, end, steps)
+{
+    local ret k l step C length slope x1 x2 y1 y2;
+    local segment;
+    steps = int (steps);
+    if (steps < 1) {
+	return newerror("makerange: number of steps must be > 0");
+    }
+    if (!isnum(start) || !isnum(end)) {
+	return newerror("makerange: only numbers are supported yet");
+    }
+    if (isreal(start) && isreal(end)) {
+	step = (end - start) / (steps);
+	print step;
+	ret = mat[steps + 1];
+	for (k = 0; k <= steps; k++) {
+	    ret[k] = k * step + start;
+	}
+    } else {
+	ret = mat[steps + 1];
+	if (re(start) > re(end)) {
+	    swap(start, end);
+	}
+
+	slope = (im(end) - im(start)) / (re(end) - re(start));
+	C = im(start) - slope * re(start);
+	length = abs(re(start) - re(end));
+	segment = length / (steps);
+
+	for (k = re(start), l = 0; k <= (re(end)); k += segment, l++) {
+	    x1 = slope * (k) + C;
+	    ret[l] = k + x1 * 1i;
+	}
+
+    }
+    return ret;
+}
+
+define makecircle(radius, center, points)
+{
+    local ret k a b twopi centerx centery;
+    if (!isint(points) || points < 2) {
+	return
+	    newerror("makecircle: number of points is not a positive integer");
+    }
+    if (!isnum(center)) {
+	return newerror("makecircle: center does not lie on the complex plane");
+    }
+    if (!isreal(radius) || radius <= 0) {
+	return newerror("makecircle: radius is not a real > 0");
+    }
+    ret = mat[points];
+    twopi = 2 * pi();
+    centerx = re(center);
+    centery = im(center);
+    for (k = 0; k < points; k++) {
+	a = centerx + radius * cos(twopi * k / points);
+	b = centery + radius * sin(twopi * k / points);
+	ret[k] = a + b * 1i;
+    }
+    return ret;
+}
+
+define makeellipse(angle, a, b, center, points)
+{
+    local ret k x y twopi centerx centery;
+    if (!isint(points) || points < 2) {
+	return
+	    newerror("makeellipse: number of points is not a positive integer");
+    }
+    if (!isnum(center)) {
+	return
+	    newerror("makeellipse: center does not lie on the complex plane");
+    }
+    if (!isreal(a) || a <= 0) {
+	return newerror("makecircle: a is not a real > 0");
+    }
+    if (!isreal(b) || b <= 0) {
+	return newerror("makecircle: b is not a real > 0");
+    }
+    if (!isreal(angle)) {
+	return newerror("makecircle: angle is not a real");
+    }
+    ret = mat[points];
+    twopi = 2 * pi();
+    centerx = re(center);
+    centery = im(center);
+    for (k = 0; k < points; k++) {
+	x = centerx + a * cos(twopi * k / points) * cos(angle)
+	    - b * sin(twopi * k / points) * sin(angle);
+	y = centerx + a * cos(twopi * k / points) * sin(angle)
+	    + b * sin(twopi * k / points) * cos(angle);
+	ret[k] = x + y * 1i;
+    }
+    return ret;
+}
+
+define makepoints()
+{
+    local ret k;
+    ret = mat[param(0)];
+    for (k = 0; k < param(0); k++) {
+	if (!isnum(param(k + 1))) {
+	    return
+		newerror(strcat
+			 ("makepoints: parameter number \"", str(k + 1),
+			  "\" is not a number"));
+	}
+	ret[k] = param(k + 1);
+    }
+    return ret;
+}
+
+
+config("resource_debug", resource_debug_level),;
+if (config("resource_debug") & 3) {
+    print "quadtsdeletenodes()";
+    print "quadtscomputenodes(order, expo, eps)";
+    print "quadtscore(a,b,n)";
+    print "quadts(a,b,points)";
+    print "quadglcomputenodes(N)";
+    print "quadgldeletenodes()";
+    print "quadglcore(a,b,n)";
+    print "quadgl(a,b,points)";
+    print "quad(a,b,points=-1,method=\"tanhsinh\")";
+    print "makerange(start, end, steps)";
+    print "makecircle(radius, center, points)";
+    print "makeellipse(angle, a, b, center, points)";
+    print "makepoints(a1,[...])";
+}

cal/lambertw.cal

@@ -1,13 +1,13 @@
 /*
- *  lambertw- Lambert's W-function
+ * lambertw - Lambert's W-function
  *
  * Copyright (C) 2013 Christoph Zurnieden
  *
- * lambertw is open software; you can redistribute it and/or modify it under
+ * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
  * as published by the Free Software Foundation.
  *
- * lambertw is distributed in the hope that it will be useful, but WITHOUT
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
  * Public License for more details.
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: lambertw.cal,v 30.3 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: lambertw.cal,v 30.4 2013/08/18 20:01:53 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cal/RCS/lambertw.cal,v $
  *
  * Under source code control:	2013/08/11 01:31:28

cal/lnseries.cal

@@ -1,13 +1,13 @@
 /*
- * special_functions - special functions (e.g.: gamma, zeta, psi)
+ * lnseries - special functions (e.g.: gamma, zeta, psi)
  *
  * Copyright (C) 2013 Christoph Zurnieden
  *
- * lnseries.cal is open software; you can redistribute it and/or modify it under
+ * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
  * as published by the Free Software Foundation.
  *
- * lnseries.cal is distributed in the hope that it will be useful, but WITHOUT
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
  * Public License for more details.
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: lnseries.cal,v 30.3 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: lnseries.cal,v 30.4 2013/08/18 20:01:53 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cal/RCS/lnseries.cal,v $
  *
  * Under source code control:	2013/08/11 01:31:28

cal/lucas.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: lucas.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: lucas.cal,v 30.2 2013/09/27 08:58:46 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cal/RCS/lucas.cal,v $
  *
  * Under source code control:	1990/05/03 16:49:51
@@ -442,7 +442,7 @@ lucas(h, n)
  * See the function gen_v1() for details on the value of v(1).
  *
  * input:
- *	h	- h as in h*2^n-1	(h mod 2 != 0)
+ *	h	- h as in h*2^n-1
  *	n	- n as in h*2^n-1
  *	v1	- gen_v1(h,n)		(see function below)
  *
@@ -475,13 +475,6 @@ gen_u0(h, n, v1)
 		quit "bogus arg: v1 is <= 0";
 	}
 
-	/*
-	 * enforce the h mod rules
-	 */
-	if (h%2 == 0) {
-		quit "h must not be even";
-	}
-
 	/*
 	 * enforce the h > 0 and n >= 2 rules
 	 */

cal/regress.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.8 $
- * @(#) $Id: regress.cal,v 30.8 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.13 $
+ * @(#) $Id: regress.cal,v 30.13 2016/02/06 08:39:35 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cal/RCS/regress.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:36
@@ -403,14 +403,14 @@ define test_config()
 					'512: config("trace") == 0');
 	vrfy(config("maxprint") == 16,
 					'513: config("maxprint") == 16');
-	vrfy(config("mul2") == 1780,
-					'514: config("mul2") == 1780');
-	vrfy(config("sq2") == 3388,
-					'515: config("sq2") == 3388');
-	vrfy(config("pow2") == 176,
-					'516: config("pow2") == 176');
-	vrfy(config("redc2") == 220,
-					'517: config("redc2") == 220');
+	vrfy(config("mul2") == 28,
+					'514: config("mul2") == 28');
+	vrfy(config("sq2") == 28,
+					'515: config("sq2") == 28');
+	vrfy(config("pow2") == 20,
+					'516: config("pow2") == 20');
+	vrfy(config("redc2") == 25,
+					'517: config("redc2") == 25');
 	vrfy(config("tilde"),
 					'518: config("tilde")');
 	vrfy(config("tab"),
@@ -768,6 +768,8 @@ print '016: parsed test_bignums()';
 
 /*
  * Test many of the built-in functions.
+ *
+ * See test_functionss() starting at test 9000 for more built-in function tests.
  */
 define test_functions()
 {
@@ -1445,7 +1447,12 @@ define test_functions()
 	vrfy(jacobi(-1,-1) == 0,	'1236: jacobi(-1,-1) == 0');
 	vrfy(jacobi(0,-1) == 0,		'1237: jacobi(0,-1) == 0');
 
-	print '1238: Ending test_functions';
+	/*
+	 * NOTE: Function tests are continued in test_functionss()
+	 *	 starting at test 9000.
+	 */
+
+	print '1293: Ending test_functions';
 }
 print '017: parsed test_functions()';
 
@@ -1462,14 +1469,14 @@ define _test_underscore()
 	local _a = 27;
 	local __a = 23209;
 
-	print "1290: Beginning _test_underscore";
+	print "1294: Beginning _test_underscore";
 
-	vrfy(_a == 27,			    '1291: _a == 27');
-	vrfy(_ == 49,			    '1292: _ == 49');
-	vrfy(__ == 63,			    '1293: __ == 63');
-	vrfy(__a == 23209,		    '1294: __a == 23209');
+	vrfy(_a == 27,			    '1295: _a == 27');
+	vrfy(_ == 49,			    '1296: _ == 49');
+	vrfy(__ == 63,			    '1297: __ == 63');
+	vrfy(__a == 23209,		    '1298: __a == 23209');
 
-	print "1295: Ending _test_underscore";
+	print "1299: Ending _test_underscore";
 }
 print '020: parsed _test_underscore';
 
@@ -5031,7 +5038,7 @@ vrfy(i == 9,		'151: i == 9');
 
 
 /*
- * test_commaeq - test changes to , and =
+ * test_commaeq - test changes to = and ,
  */
 obj xx5600 {} xx5600;
 print '152: obj xx5600 {} xx5600';
@@ -7929,9 +7936,128 @@ print '8901: read -once "test8900"';
 read -once "test8900";
 print '8902: about to run test8900(1,,8903)';
 testnum = test8900(1,,8903);
+print '8999: ecnt = 203;'
+ecnt = 203;
 /* 89xx: test calc resource functions by Christoph Zurnieden */
 
 
+/*
+ * Test more of the built-in functions.
+ *
+ * See test_functions() (test 700 - 1238) for other built-in function tests.
+ */
+define test_functions2()
+{
+	print '9001: Beginning test_functions2';
+
+	/* ctype function tests */
+	vrfy(isalnum("A") == 1,		'9002: isalnum("A") == 1');
+	vrfy(isalnum("a") == 1,		'9003: isalnum("a") == 1');
+	vrfy(isalnum("2") == 1,		'9004: isalnum("2") == 1');
+	vrfy(isalnum("\t") == 0,	'9005: isalnum("\\t") == 0');
+
+	vrfy(isalpha("A") == 1,		'9006: isalpha("A") == 1');
+	vrfy(isalpha("a") == 1,		'9007: isalpha("a") == 1');
+	vrfy(isalpha("2") == 0,		'9008: isalpha("2") == 0');
+	vrfy(isalpha("\t") == 0,	'9009: isalpha("\\t") == 0');
+
+	vrfy(iscntrl("A") == 0,		'9010: iscntrl("A") == 0');
+	vrfy(iscntrl("a") == 0,		'9011: iscntrl("a") == 0');
+	vrfy(iscntrl("2") == 0,		'9012: iscntrl("2") == 0');
+	vrfy(iscntrl("\t") == 1,	'9013: iscntrl("\\t") == 1');
+
+	vrfy(isdigit("A") == 0,		'9014: isdigit("A") == 0');
+	vrfy(isdigit("a") == 0,		'9015: isdigit("a") == 0');
+	vrfy(isdigit("2") == 1,		'9016: isdigit("2") == 1');
+	vrfy(isdigit("\t") == 0,	'9017: isdigit("\\t") == 0');
+
+	vrfy(isgraph("A") == 1,		'9018: isgraph("A") == 1');
+	vrfy(isgraph("a") == 1,		'9019: isgraph("a") == 1');
+	vrfy(isgraph("2") == 1,		'9020: isgraph("2") == 1');
+	vrfy(isgraph("\t") == 0,	'9021: isgraph("\\t") == 0');
+
+	vrfy(islower("A") == 0,		'9022: islower("A") == 0');
+	vrfy(islower("a") == 1,		'9023: islower("a") == 1');
+	vrfy(islower("1") == 0,		'9024: islower("1") == 0');
+
+	vrfy(isprint("A") == 1,		'9025: isprint("A") == 1');
+	vrfy(isprint("a") == 1,		'9026: isprint("a") == 1');
+	vrfy(isprint(" ") == 1,		'9027: isprint(" ") == 1');
+	vrfy(isprint("\t") == 0,	'9028: isprint("\\t") == 0');
+
+	vrfy(ispunct("A") == 0,		'9029: ispunct("A") == 0');
+	vrfy(ispunct("a") == 0,		'9030: ispunct("a") == 0');
+	vrfy(ispunct(" ") == 0,		'9031: ispunct(" ") == 0');
+	vrfy(ispunct("?") == 1,		'9032: ispunct("?") == 1');
+
+	vrfy(isspace("A") == 0,		'9033: isspace("A") == 0');
+	vrfy(isspace("Krik") == 0,	'9034: isspace("Krik") == 0');
+	vrfy(isspace(" ") == 1,		'9035: isspace(" ") == 1');
+	vrfy(isspace("?") == 0,		'9036: isspace("?") == 0');
+
+	vrfy(isupper("A") == 1,		'9037: isupper("A") == 1');
+	vrfy(isupper("a") == 0,		'9038: isupper("a") == 0');
+	vrfy(isupper("1") == 0,		'9039: isupper("1") == 0');
+
+	vrfy(isxdigit("A") == 1,	'9040: isxdigit("A") == 1');
+	vrfy(isxdigit("f") == 1,	'9041: isxdigit("f") == 1');
+	vrfy(isxdigit("2") == 1,	'9042: isxdigit("2") == 1');
+	vrfy(isxdigit("x") == 0,	'9043: isxdigit("x") == 0');
+
+	vrfy(strcasecmp("ab", "aBc") == -1,
+			     '9044: strcasecmp("ab", "aBc") == -1');
+	vrfy(strcasecmp("abc", "aBb") == 1,
+			     '9045: strcasecmp("abc", "aBb") == 1');
+	vrfy(strcasecmp("abc", "abc") == 0,
+			     '9046: strcasecmp("abc", "abc") == 0');
+	vrfy(strcasecmp("abc", "aBc") == 0,
+			     '9047: strcasecmp("abc", "aBc") == 0');
+	vrfy(strcasecmp("abc", "aBd") == -1,
+			     '9048: strcasecmp("abc", "aBd") == -1');
+	vrfy(strcasecmp("abc\0", "aBc") == 1,
+			     '9049: strcasecmp("a8c\\0", "aBc") == 1');
+	vrfy(strcasecmp("a\0b", "A\0c") == -1,
+			     '9050: strcasecmp("a\\0b", "A\\0c") == -1');
+
+	vrfy(strncasecmp("abc", "xyz", 0) == 0,
+			     '9051: strncasecmp("abc", "xyz", 0) == 0');
+	vrfy(strncasecmp("abc", "xyz", 1) == -1,
+			     '9052: strncasecmp("abc", "xyz", 1) == -1');
+	vrfy(strncasecmp("abc", "", 1) == 1,
+			     '9053: strncasecmp("abc", "", 1) == 1');
+	vrfy(strncasecmp("a", "b", 2) == -1,
+			     '9054: strncasecmp("a", "b", 2) == -1');
+	vrfy(strncasecmp("ab", "Ac", 2) == -1,
+			     '9055: strncasecmp("ab", "Ac", 2) == -1');
+	vrfy(strncasecmp("\0ac", "\0b", 2) == -1,
+			     '9056: strncasecmp("\\0ac", "\\0b", 2) == -1');
+	vrfy(strncasecmp("ab", "aBc", 2) == 0,
+			     '9057: strncasecmp("ab", "aBc", 2) == 0');
+	vrfy(strncasecmp("abc", "abd", 2) == 0,
+			     '9058: strncasecmp("abc", "abd", 2) == 0');
+
+	local s1 = " gnu lesser general public license";
+	print '9059: local s1 = " gnu lesser general public license";';
+
+	vrfy(strcmp(strtolower(" GNU Lesser General Public License"), s1) == 0,
+	    '9060: strcmp(strtolower(" GNU Lesser General Public License"),' +
+	    ' s1) == 0');
+
+	local s2 = " GNU LESSER GENERAL PUBLIC LICENSE";
+	print '9061: local s2 = " GNU LESSER GENERAL PUBLIC LICENSE";';
+
+	vrfy(strcmp(strtoupper(" GNU Lesser General Public License"), s2) == 0,
+	    '9062: strcmp(strtoupper(" GNU Lesser General Public License"),' +
+	    ' s2) == 0');
+
+	print '9063: Ending test_functions2';
+}
+print;
+print '9000: parsed test_functions2()';
+print;
+return test_functions2();
+
+
 /*
  * read various calc resource files
  *

cal/smallfactors.cal

@@ -0,0 +1,71 @@
+/*
+ * smallfactors - find the factors of a number < 2^32
+ *
+ * Copyright (C) 2013 Christoph Zurnieden
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+
+static resource_debug_level;
+resource_debug_level = config("resource_debug", 0);
+
+
+define smallfactors(x0)
+{
+    local d q x flist tuple w;
+
+    if (x >= (2 ^ 32) - 1)
+	return newerror("smallfactors: number must be < 2^32 -1");
+
+    tuple = mat[2];
+    flist = list();
+    x = x0;
+    d = 2;
+    q = 0;
+    tuple[0] = d;
+    if (x < 2)
+	return 0;
+    do {
+	q = x // d;
+	    while (x == (q * d)) {
+	    tuple[0] = d;
+	    tuple[1]++;
+	    x = floor(q);
+	    q = x // d;
+	}
+	d = nextprime(d);
+	if (tuple[1] > 0)
+	    append(flist, tuple);
+	tuple = mat[2];
+    } while (d <= x);
+    return flist;
+}
+
+define printsmallfactors(flist)
+{
+    local k;
+    for (k = 0; k < size(flist); k++) {
+	print flist[k][0]:"^":flist[k][1];
+    }
+}
+
+
+config("resource_debug", resource_debug_level),;
+if (config("resource_debug") & 3) {
+    print "smallfactors(x0)";
+    print "printsmallfactors(flist)";
+
+}

cal/statistics.cal

@@ -1,13 +1,13 @@
 /*
- *  statistics - Some assorted statistics functions.
+ * statistics - Some assorted statistics functions.
  *
  * Copyright (C) 2013 Christoph Zurnieden
  *
- * statistics is open software; you can redistribute it and/or modify it under
+ * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
  * as published by the Free Software Foundation.
  *
- * statistics is distributed in the hope that it will be useful, but WITHOUT
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
  * Public License for more details.
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: statistics.cal,v 30.3 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: statistics.cal,v 30.4 2013/08/18 20:01:53 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cal/RCS/statistics.cal,v $
  *
  * Under source code control:	2013/08/11 01:31:28
@@ -31,8 +31,8 @@ resource_debug_level = config("resource_debug", 0);
 
 
 /*
-  get dependencies
-*/
+ *  get dependencies
+ */
 read -once factorial2 brentsolve
 
 

cal/strings.cal

@@ -0,0 +1,41 @@
+/*
+ * strings - implementation of some of the macros in ctype.h
+ *
+ * Copyright (C) 2013 Christoph Zurnieden
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+
+static resource_debug_level;
+resource_debug_level = config("resource_debug", 0);
+
+define isascii(c){
+  c = ord(c);
+  return (c >= 0 && c< 128);
+}
+
+define isblank(c){
+  c = ord(c);
+  return ( c == 32 || c == 9 );
+}
+
+
+config("resource_debug", resource_debug_level),;
+if (config("resource_debug") & 3) {
+    print "isascii(c)";
+    print "isblank(c)";
+}
+

cal/toomcook.cal

@@ -1,13 +1,13 @@
 /*
- * Toom-Cook - implementation of Toom-Cook(3,4) multiplication algorithm
+ * toomcook - implementation of Toom-Cook(3,4) multiplication algorithm
  *
  * Copyright (C) 2013 Christoph Zurnieden
  *
- * Toom-Cook is open software; you can redistribute it and/or modify it under
+ * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
  * as published by the Free Software Foundation.
  *
- * Toom-Cook is distributed in the hope that it will be useful, but WITHOUT
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
  * Public License for more details.
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: toomcook.cal,v 30.3 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: toomcook.cal,v 30.4 2013/08/18 20:01:53 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cal/RCS/toomcook.cal,v $
  *
  * Under source code control:	2013/08/11 01:31:28

cal/zeta2.cal

@@ -1,27 +1,29 @@
 /*
  * zeta2 - Hurwitz Zeta function
- * Copyright (C) 2013 Christoph Zurnieden
- * Version: 0.0.1
- * Licence: GPL
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+ * Public License for more details.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: zeta2.cal,v 30.3 2013/08/11 08:41:38 chongo Exp $
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: zeta2.cal,v 30.4 2013/08/18 20:01:53 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cal/RCS/zeta2.cal,v $
  *
  * Under source code control:	2013/08/11 01:31:28
  * File existed as early as:	2013
  */
 
+
 /*
  * hide internal function from resource debugging
  */

calc.h

@@ -1,7 +1,7 @@
 /*
  * calc - definitions for calculator program
  *
- * Copyright (C) 1999-2007  David I. Bell
+ * Copyright (C) 1999-2007,2014  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: calc.h,v 30.3 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.6 $
+ * @(#) $Id: calc.h,v 30.6 2014/08/24 21:56:51 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/RCS/calc.h,v $
  *
  * Under source code control:	1990/02/15 01:48:31
@@ -28,8 +28,8 @@
  */
 
 
-#if !defined(__CALC_H__)
-#define __CALC_H__
+#if !defined(INCLUDE_CALC_H)
+#define INCLUDE_CALC_H
 
 #include <setjmp.h>
 #if defined(CALC_SRC)	/* if we are building from the calc source tree */
@@ -140,7 +140,7 @@ E_FUNC int ftellid(FILEID id, ZVALUE *res);
 E_FUNC int fseekid(FILEID id, ZVALUE offset, int whence);
 E_FUNC int isattyid(FILEID id);
 E_FUNC int fsearch(FILEID id, char *str, ZVALUE start, ZVALUE end, ZVALUE *res);
-E_FUNC int frsearch(FILEID id, char *str, ZVALUE first, ZVALUE last, 
+E_FUNC int frsearch(FILEID id, char *str, ZVALUE first, ZVALUE last,
 		    ZVALUE *res);
 E_FUNC void showconstants(void);
 E_FUNC void freeconstant(unsigned long);
@@ -152,7 +152,7 @@ E_FUNC void trimconstants(void);
  */
 E_FUNC int openstring(char *str, size_t num);
 E_FUNC int openterminal(void);
-E_FUNC int opensearchfile(char *name, char *pathlist, char *exten, 
+E_FUNC int opensearchfile(char *name, char *pathlist, char *exten,
 			  int reopen_ok);
 E_FUNC char *nextline(void);
 E_FUNC int nextchar(void);
@@ -267,4 +267,4 @@ EXTERN char *Copyright;
 E_FUNC char *version(void);
 
 
-#endif /* !__CALC_H__ */
+#endif /* !INCLUDE_CALC_H */

calc.man

@@ -1,5 +1,5 @@
 .\"
-.\" Copyright (C) 1999-2007	Landon Curt Noll
+.\" Copyright (C) 1999-2007,2014	Landon Curt Noll
 .\"
 .\" Calc is open software; you can redistribute it and/or modify it under
 .\" the terms of the version 2.1 of the GNU Lesser General Public License
@@ -15,8 +15,8 @@
 .\" received a copy with calc; if not, write to Free Software Foundation, Inc.
 .\" 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 .\"
-.\" @(#) $Revision: 30.5 $
-.\" @(#) $Id: calc.man,v 30.5 2013/08/11 08:41:38 chongo Exp $
+.\" @(#) $Revision: 30.6 $
+.\" @(#) $Id: calc.man,v 30.6 2014/10/06 08:39:45 chongo Exp $
 .\" @(#) $Source: /usr/local/src/bin/calc/RCS/calc.man,v $
 .\"
 .\" Under source code control:	    1991/07/23 05:48:26
@@ -1115,45 +1115,62 @@ To contribute comments, suggestions, enhancements
 and interesting
 .B calc
 resource files, and
-shell scripts please join the low volume calc mailing list.
+shell scripts please join the calc-tester
+low volume moderated calc mailing list.
 .sp
-To join the low volume calc mailing list, send EMail to:
+To the calc-tester mailing list, visit the following URL:
 .sp
 .in +0.5i
 .nf
-calc-tester-request at asthe dot com
+https://www.listbox.com/subscribe/?list_id=239342
 .fi
 .in -0.5i
 .sp
-Your subject must contain the words:
+To help determine you are a human and not just a spam bot,
+you will be required to provide the following additional information:
 .sp
 .in +0.5i
 .nf
-calc mailing list subscription
+Your Name
+
+Calc Version
+   For example, the current version is: ${VERSION}
+
+Operating System
+   If you don't know your operating system, enter: unknown
+
+The date 7 days ago
+   Consult a calendar :-)
+.fi
+.in -0.5i
+.sp
+If you need a human to help you with your mailing list subscription,
+or if you have problems with the above procedure, please
+send EMail to our special address:
+.sp
+.in +0.5i
+.nf
+calc-tester-maillist-help at asthe dot com
+
+NOTE: Remove spaces and replace 'at' with @, 'dot' with .
+
+NOTE: Yes, the EMail address uses 'asthe',
+      while the web site uses 'isthe'.
+.fi
+.in -0.5i
+.sp
+To be sure we see your EMail asking for help with your mailing list
+subscription, please use the following phase in your EMail Subject line
+your subject must contain the words:
+.sp
+.in +0.5i
+.nf
+calc tester mailing list help
 .fi
 .in -0.5i
 .sp
 You may have additional words in your subject line.
 .sp
-Your message body must contain:
-.sp
-.in +0.5i
-.nf
-subscribe calc-tester address
-end
-name your_full_name
-.fi
-.in -0.5i
-.sp
-where
-.B address
-s your EMail address and
-.B your_full_name
-is your full name.
-Feel free to follow the
-.B name
-line with additional EMail text as desired.
-.sp
 .SH "BUG REPORTS / BUG FIXES"
 \&
 .br
@@ -1162,12 +1179,12 @@ Send bug reports and bug fixes to:
 .sp
 .in +0.5i
 .nf
-calc-bugs at asthe dot com
+calc-bug-report at asthe dot com
 
-[[ NOTE: Replace 'at' with @, 'dot' is with . ]]
-[[       and remove the spaces ]]
-[[ NOTE: The EMail address uses 'asthe' and
-[[       the web site URL uses 'isthe' ]]
+NOTE: Remove spaces and replace 'at' with @, 'dot' with .
+
+NOTE: Yes, the EMail address uses 'asthe',
+      while the web site uses 'isthe'.
 .fi
 .in -0.5i
 .sp
@@ -1180,6 +1197,10 @@ calc bug report
 .in -0.5i
 .sp
 You may have additional words in your subject line.
+.in
+However, you may find it more helpful to simply subscribe to the
+calc-tester mailing list (see above) and then to send your report
+to that mailing list as a wider set calc testers may be able to help you.
 .sp
 See the
 .I BUGS

calc.spec.in

@@ -1,8 +1,7 @@
-#****h* calc/calc.spec.in
 #
 # calc.spec.in - template specfile for calc
 #
-# Copyright (C) 2003-2013  Petteri Kettunen and Landon Curt Noll
+# Copyright (C) 2003-2014  Petteri Kettunen and Landon Curt Noll
 #
 # Calc is open software; you can redistribute it and/or modify it under
 # the terms of the version 2.1 of the GNU Lesser General Public License
@@ -18,8 +17,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.11 $
-# @(#) $Id: calc.spec.in,v 30.11 2013/08/11 08:41:38 chongo Exp $
+# @(#) $Revision: 30.23 $
+# @(#) $Id: calc.spec.in,v 30.23 2014/09/22 05:01:58 chongo Exp $
 # @(#) $Source: /usr/local/src/bin/calc/RCS/calc.spec.in,v $
 #
 # Under source code control:	2003/02/16 20:21:39
@@ -31,13 +30,13 @@
 # BUGS
 #  - Uninstalling calc and calc-devel leaves empty dirs /usr/include/calc
 #    and /usr/share/calc and its subdirs. In case e.g. %{_includedir}/calc
-#    is defined in `%files devel' section, then rpmbuild complains that
+#    is defined in `files devel' section, then rpmbuild complains that
 #    header files are defined twice - rpmbuild bug or bug in specfile conf???
 
 Summary: Arbitrary precision calculator.
 Name: calc
 Version: <<<PROJECT_VERSION>>>
-Release: 10
+Release: 12
 License: LGPL
 Group: Applications/Engineering
 Source: http://www.isthe.com/chongo/src/calc/%{name}-%{version}.tar.bz2
@@ -46,6 +45,8 @@ Vendor: Landon Noll and Associates
 Packager: Landon Noll and Associates (http://www.isthe.com/chongo/index.html)
 Requires: ncurses >= 5.5-24, readline >= 5.1-3, less >= 358
 BuildRequires: ncurses-devel >= 5.5-24, readline-devel >= 5.1-3
+Provides: libcalc.so.%{version}()(64bit)
+Provides: libcustcalc.so.%{version}()(64bit)
 BuildRoot: %{_tmppath}/build-root
 
 %description
@@ -61,7 +62,10 @@ For the latest calc release, see the calc project home page:
 %package devel
 Summary: Development files and documentation for calc.
 Group: Applications/Engineering
-Requires: calc = %{version}-%{release}
+Requires: calc(x86-64) = %{version}-%{release}
+Requires: libcalc.so.%{version}()(64bit)
+Requires: libcustcalc.so.%{version}()(64bit)
+Requires: ncurses >= 5.5-24, readline >= 5.1-3, less >= 358
 
 %description devel
 This package contains the header files and static libraries for developing
@@ -76,63 +80,67 @@ For the latest calc release, see the project home page:
 
 %build
 echo '-=- calc.spec beginning make clobber -=-'
-make %{?_smp_mflags} T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
+make -j1 T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
      CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc \
      MANDIR=%{_mandir}/man1 EXT= V=@ clobber
 echo '-=- calc.spec ending make clobber -=-'
 echo '-=- calc.spec beginning make calc-static-only -=-'
-make %{?_smp_mflags} T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
+make -j1 T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
      CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc \
      MANDIR=%{_mandir}/man1 EXT= V=@ calc-static-only BLD_TYPE=calc-static-only
 echo '-=- calc.spec ending make calc-static-only -=-'
 echo '-=- calc.spec beginning make rpm-hide-static -=-'
-make %{?_smp_mflags} T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
+make -j1 T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
      CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc \
      MANDIR=%{_mandir}/man1 EXT= V=@ rpm-hide-static
 echo '-=- calc.spec ending make rpm-hide-static -=-'
 echo '-=- calc.spec beginning make clobber (again) -=-'
-make %{?_smp_mflags} T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
+make -j1 T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
      CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc \
      MANDIR=%{_mandir}/man1 EXT= V=@ clobber
 echo '-=- calc.spec ending make clobber (again) -=-'
 echo '-=- calc.spec beginning make calc-dynamic-only -=-'
-make %{?_smp_mflags} T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
+make -j1 T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
      CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc \
      MANDIR=%{_mandir}/man1 EXT= V=@ calc-dynamic-only \
      BLD_TYPE=calc-dynamic-only LD_SHARE=
 echo '-=- calc.spec ending make calc-dynamic-only -=-'
 echo '-=- calc.spec beginning make chk -=-'
-make %{?_smp_mflags} T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
+make -j1 T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
      CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc \
      MANDIR=%{_mandir}/man1 EXT= V=@ chk
 echo '-=- calc.spec ending make chk -=-'
 echo '-=- calc.spec beginning make rpm-unhide-static -=-'
-make %{?_smp_mflags} T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
+make -j1 T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
      CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc \
      MANDIR=%{_mandir}/man1 EXT= V=@ rpm-unhide-static
 echo '-=- calc.spec ending make rpm-unhide-static -=-'
 echo '-=- calc.spec beginning make rpm-clean-static -=-'
-make %{?_smp_mflags} T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
+make -j1 BINDIR=%{_bindir} LIBDIR=%{_libdir} \
      CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc \
      MANDIR=%{_mandir}/man1 EXT= V=@ rpm-clean-static
 echo '-=- calc.spec ending make rpm-clean-static -=-'
 echo '-=- calc.spec beginning make rpm-chk-static -=-'
-make %{?_smp_mflags} T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
+make -j1 T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
      CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc \
      MANDIR=%{_mandir}/man1 EXT= V=@ rpm-chk-static
 echo '-=- calc.spec ending make rpm-chk-static -=-'
 
 %install
 echo '-=- calc.spec beginning make install -=-'
-rm -rf %{_buildroot}
 mkdir -p %{_buildroot}
-make T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
+make -j1 T=%{_buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} \
      CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc \
      MANDIR=%{_mandir}/man1 EXT= V=@ install
 echo '-=- calc.spec ending make install -=-'
 
 %clean
-rm -rf %{_buildroot}
+echo '-=- calc.spec beginning make clean -=-'
+rm -rf %{_tmppath}
+rm -rf %{_builddir}
+rm -rf %{_specdir}
+rm -rf %{_buildrootdir}
+echo '-=- calc.spec beginning make clean -=-'
 
 %files
 %defattr(-, root, root)
@@ -146,11 +154,11 @@ rm -rf %{_buildroot}
 %attr(644, root, root) %{_datadir}/%{name}/custom/*.cal
 %attr(644, root, root) %{_datadir}/%{name}/help/*
 %attr(644, root, root) %{_datadir}/%{name}/*.cal
-%attr(644, root, root) %{_datadir}/%{name}/*.line
+%attr(644, root, root) %{_datadir}/%{name}/set8700.line
 %attr(644, root, root) %{_libdir}/libcalc.so
-%attr(644, root, root) %{_libdir}/libcalc.so.*
+%attr(644, root, root) %{_libdir}/libcalc.so.%{version}
 %attr(644, root, root) %{_libdir}/libcustcalc.so
-%attr(644, root, root) %{_libdir}/libcustcalc.so.*
+%attr(644, root, root) %{_libdir}/libcustcalc.so.%{version}
 
 %files devel
 %defattr(-, root, root)
@@ -161,7 +169,27 @@ rm -rf %{_buildroot}
 %attr(644, root, root) %{_libdir}/libcustcalc.a
 
 %changelog
-* Sat May 05 2013 Landon Curt Noll http://www.isthe.com/chongo
+* Mon Sep 01 2014 Landon Curt Noll http://www.isthe.com/chongo
+- Release: 12
+- Removed use of %{?_smp_mflags}.  On Ubuntu 14.04, the -j2
+  was executing make lines within a rule out of order. Always
+  use -j1 while building these RPMs to avoid this make bug.
+  This only impacts the speed of building the rpms.
+- Stopped removing %{_buildroot} at the beginning of install
+  as this, acording to a number of sources, was asking for trouble.
+- Clean removes tmp, BUILD, SPEC, and BUILDROOT dirs under topdir.
+- Fixed the building of the calc-debuginfo rpm.
+- Eliminated rpmbuild "bogus date" warnings due to inconsistent weekday,
+  by assuming the date is correct and changing the weekday via BogusDateBot.
+  Sun May 20 2006 --> Sun May 14 2006
+  Sun Sep 01 2007 --> Sun Aug 26 2007
+  Sat May 05 2013 --> Sat May 04 2013
+
+* Sun Sep 01 2013 Landon Curt Noll http://www.isthe.com/chongo
+- Release: 11
+- only list %{_datadir}/%{name}/set8700.line not *.line
+
+* Sun May 05 2013 Landon Curt Noll http://www.isthe.com/chongo
 - Release: 10
 - Major bug rpm build process bug fix
 - Source: is a URL as per rpm requirements
@@ -171,37 +199,46 @@ rm -rf %{_buildroot}
 - Fixed use of %{_buildroot}
 - Fixed permissions so that rpm build services can modify libraries
 - Added missing files to files section
+
 * Mon Mar 25 2013 Landon Curt Noll http://www.isthe.com/chongo
 - Release: 9 (was 1.1)
 - Removed deprecated PreReq for calc-devel, using Requires
-* Sun Sep 01 2007 Landon Curt Noll http://www.isthe.com/chongo
+
+* Sat Sep 01 2007 Landon Curt Noll http://www.isthe.com/chongo
 - Release: 8
 - Release of calc-2.12.2
 - Calc builds with shared libraries
+
 * Sun Jun 25 2006 Landon Curt Noll http://www.isthe.com/chongo
 - Release: 7
 - Changed Copyright to License as per new rpm v4.4 syntax
-* Sun May 20 2006 Landon Curt Noll http://www.isthe.com/chongo
+
+* Sat May 20 2006 Landon Curt Noll http://www.isthe.com/chongo
 - Release: 6
 - Release of calc-2.12.0
 - Added *.line set files to the list of packaged files
+
 * Sun Dec 11 2005 Landon Curt Noll http://www.isthe.com/chongo
 - Release: 5
 - Release of calc-2.11.11
 - Fixed description in spec file
+
 * Wed Feb 26 2003 Landon Curt Noll http://www.isthe.com/chongo
 - Release: 4
 - Release of calc-2.11.7-2
 - Fixed attributes on include and lib calc-devel files
 - Added BUGS to calc-devel as well as calc
+
 * Tue Feb 25 2003 Landon Curt Noll http://www.isthe.com/chongo
 - Release: 3
 - Release of calc-2.11.7-1
 - Require ncurses, readline and less to install.
 - Require ncurses-devel and readline-devel to build.
+
 * Tue Feb 18 2003 Landon Curt Noll http://www.isthe.com/chongo
 - Release: 2
 - Misc changes to fit local directory setup
+
 * Sun Feb 16 2003 Petteri Kettunen <petterik@users.sourceforge.net>
 - Release: 1
 - initial RPM build

calcerr.tbl

@@ -17,8 +17,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.1 $
-# @(#) $Id: calcerr.tbl,v 30.1 2007/03/16 11:09:46 chongo Exp $
+# @(#) $Revision: 30.4 $
+# @(#) $Id: calcerr.tbl,v 30.4 2013/09/02 01:38:08 chongo Exp $
 # @(#) $Source: /usr/local/src/bin/calc/RCS/calcerr.tbl,v $
 #
 # Under source code control:	1996/05/23 17:38:44
@@ -32,6 +32,16 @@
 #
 #	SYMBOL	meaning
 
+######################################################################
+# WARNING: The order of the lines below is critical!  If you change  #
+#	   the order, you will break code that depends on the return #
+#	   value of the errno() builtin function.		     #
+#								     #
+#	   If you need to add values to this table, ONLY add then    #
+#	   to the bottom of the file!				     #
+######################################################################
+
+
 E_1OVER0	Division by zero
 E_0OVER0	Indeterminate (0/0)
 E_ADD		Bad arguments for +
@@ -449,3 +459,19 @@ E_FGETFILE1	Non-file argument for fgetfile
 E_FGETFILE2	File argument for fgetfile not open for reading
 E_FGETFILE3	Unable to set file position in fgetfile
 E_ESTR		Non-representable type for estr
+E_STRCASECMP	Non-string argument for strcasecmp
+E_STRNCASECMP	Bad argument type for strncasecmp
+E_ISUPPER	Bad argument for isupper
+E_ISLOWER	Bad argument for islower
+E_ISALNUM	Bad argument for isalnum
+E_ISALPHA	Bad argument for isalpha
+E_ISASCII	Bad argument for isascii
+E_ISCNTRL	Bad argument for iscntrl
+E_ISDIGIT	Bad argument for isdigit
+E_ISGRAPH	Bad argument for isgraph
+E_ISPRINT	Bad argument for isprint
+E_ISPUNCT	Bad argument for ispunct
+E_ISSPACE	Bad argument for isspace
+E_ISXDIGIT	Bad argument for isxdigit
+E_STRTOUPPER    Bad argument type for strtoupper
+E_STRTOLOWER    Bad argument type for strtolower

check.awk

@@ -20,7 +20,7 @@
 #
 # @(#) $Revision: 30.2 $
 # @(#) $Id: check.awk,v 30.2 2013/08/11 01:08:32 chongo Exp $
-# @(#) $Source: /usr/local/src/cmd/calc/RCS/check.awk,v $
+# @(#) $Source: /usr/local/src/bin/calc/RCS/check.awk,v $
 #
 # Under source code control:	1996/05/25 22:07:58
 # File existed as early as:	1996

cmath.h

@@ -1,7 +1,7 @@
 /*
  * cmath - data structures for extended precision complex arithmetic
  *
- * Copyright (C) 1999-2007  David I. Bell
+ * Copyright (C) 1999-2007,2014  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: cmath.h,v 30.1 2007/03/16 11:09:46 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: cmath.h,v 30.3 2014/08/24 21:56:51 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/RCS/cmath.h,v $
  *
  * Under source code control:	1993/07/30 19:42:45
@@ -28,8 +28,8 @@
  */
 
 
-#if !defined(__CMATH_H__)
-#define __CMATH_H__
+#if !defined(INCLUDE_CMATH_H)
+#define INCLUDE_CMATH_H
 
 
 #if defined(CALC_SRC)	/* if we are building from the calc source tree */
@@ -156,4 +156,4 @@ E_FUNC COMPLEX *swap_HALF_in_COMPLEX(COMPLEX *dest, COMPLEX *src, BOOL all);
 EXTERN COMPLEX _czero_, _cone_, _conei_;
 
 
-#endif /* !__CMATH_H__ */
+#endif /* !INCLUDE_CMATH_H */

config.h

@@ -1,7 +1,7 @@
 /*
  * config - configuration routines
  *
- * Copyright (C) 1999-2007  Landon Curt Noll and David I. Bell
+ * Copyright (C) 1999-2007,2014  Landon Curt Noll and David I. Bell
  *
  * Primary author:  Landon Curt Noll
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.2 $
- * @(#) $Id: config.h,v 30.2 2007/09/21 01:27:27 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: config.h,v 30.4 2014/08/24 21:56:51 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/RCS/config.h,v $
  *
  * Under source code control:	1995/11/01 22:20:17
@@ -31,8 +31,8 @@
  */
 
 
-#if !defined(__CONFIG_H__)
-#define __CONFIG_H__
+#if !defined(INCLUDE_CONFIG_H)
+#define INCLUDE_CONFIG_H
 
 
 #if defined(CALC_SRC)	/* if we are building from the calc source tree */
@@ -226,4 +226,4 @@ E_FUNC void config_print(CONFIG*);
 E_FUNC BOOL config_cmp(CONFIG*, CONFIG*);
 
 
-#endif /* !__CONFIG_H__ */
+#endif /* !INCLUDE_CONFIG_H */

cscript/4dsphere.calc

@@ -1,4 +1,4 @@
-#!/usr/local/src/cmd/calc/calc -q -s -f
+#!/usr/local/src/bin/calc/calc -q -s -f
 /*
  * 4dsphere - determine if 6 points lie on the surface of a sphere in R^4
  *
@@ -10,7 +10,7 @@
  *	...		...
  *      x5 y5 z5 w5	point 5 in R^4
  *
- * Copyright (C) 2001  Landon Curt Noll
+ * Copyright (C) 2001,2014  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -26,8 +26,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: 4dsphere.calc,v 30.1 2007/03/16 11:12:11 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: 4dsphere.calc,v 30.3 2014/08/24 22:04:32 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cscript/RCS/4dsphere.calc,v $
  *
  * Under source code control:   2001/05/03 19:02:03

cscript/Makefile

@@ -1,7 +1,7 @@
 #
 # cscript - makefile for calc shell script files
 #
-# Copyright (C) 1999-2006  Landon Curt Noll
+# Copyright (C) 1999-2006,2014  Landon Curt Noll
 #
 # Calc is open software; you can redistribute it and/or modify it under
 # the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.4 $
-# @(#) $Id: Makefile,v 30.4 2013/08/11 08:41:38 chongo Exp $
+# @(#) $Revision: 30.9 $
+# @(#) $Id: Makefile,v 30.9 2014/09/02 07:14:49 chongo Exp $
 # @(#) $Source: /usr/local/src/bin/calc/cscript/RCS/Makefile,v $
 #
 # Under source code control:	1999/11/29 11:10:26
@@ -227,7 +227,7 @@ all: ${TARGETS} .all
 
 README: README.src
 	@${RM} -f $@
-	@${SED} -e "s:#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${SED} -e "s:#!/usr/local/src/bin/calc/calc:#!${BINDIR}/calc:" $?>$@
 
 # used by the upper level Makefile to determine if we have done all
 #
@@ -315,9 +315,8 @@ depend:
 	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo "$$i: $$i.calc"; \
 		echo '	@$${RM} -f $$@'; \
-		echo -n '	@$${SED} -e "1s:'; \
-		echo "^#!/usr/local/src/cmd/calc/calc:#!$${BINDIR}/calc:" \
-			$$?>$$@'; \
+		echo -n '	@$${SED} -e "1s:^#!/usr/local/src/bin/'; \
+		echo 'calc/calc:#!$${BINDIR}/calc:" $$?>$$@'; \
 		echo '	@$${CHMOD} +x $$@'; \
 	    fi; \
 	done >> makedep.out
@@ -341,9 +340,9 @@ depend:
 	    fi; \
 	    ${MV} ${MAKE_FILE}.tmp ${MAKE_FILE}; \
 	    if [ -d RCS ]; then \
-		echo '*****************************************************'; \
-		echo 'new sample ${MAKE_FILE} formed -- need to check it in'; \
-		echo '*****************************************************'; \
+		echo '******************************************************'; \
+		echo 'new cscript ${MAKE_FILE} formed -- need to check it in'; \
+		echo '******************************************************'; \
 	    fi; \
 	fi
 
@@ -379,8 +378,8 @@ clobber: clean
 #
 install: all
 	-${Q} if [ ! -d ${T}${BINDIR} ]; then \
-	    echo ${MKDIR} ${T}${BINDIR}; \
-	    ${MKDIR} ${T}${BINDIR}; \
+	    echo ${MKDIR} -p ${T}${BINDIR}; \
+	    ${MKDIR} -p ${T}${BINDIR}; \
 	    if [ ! -d "${T}${BINDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${BINDIR}"; \
 		${MKDIR} -p "${T}${BINDIR}"; \
@@ -391,8 +390,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${SCRIPTDIR} ]; then \
-	    echo ${MKDIR} ${T}${SCRIPTDIR}; \
-	    ${MKDIR} ${T}${SCRIPTDIR}; \
+	    echo ${MKDIR} -p ${T}${SCRIPTDIR}; \
+	    ${MKDIR} -p ${T}${SCRIPTDIR}; \
 	    if [ ! -d "${T}${SCRIPTDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${SCRIPTDIR}"; \
 		${MKDIR} -p "${T}${SCRIPTDIR}"; \
@@ -446,33 +445,33 @@ uninstall:
 
 4dsphere: 4dsphere.calc
 	@${RM} -f $@
-	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${SED} -e "1s:^#!/usr/local/src/bin/calc/calc:#!${BINDIR}/calc:" $?>$@
 	@${CHMOD} +x $@
 fproduct: fproduct.calc
 	@${RM} -f $@
-	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${SED} -e "1s:^#!/usr/local/src/bin/calc/calc:#!${BINDIR}/calc:" $?>$@
 	@${CHMOD} +x $@
 mersenne: mersenne.calc
 	@${RM} -f $@
-	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${SED} -e "1s:^#!/usr/local/src/bin/calc/calc:#!${BINDIR}/calc:" $?>$@
 	@${CHMOD} +x $@
 piforever: piforever.calc
 	@${RM} -f $@
-	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${SED} -e "1s:^#!/usr/local/src/bin/calc/calc:#!${BINDIR}/calc:" $?>$@
 	@${CHMOD} +x $@
 plus: plus.calc
 	@${RM} -f $@
-	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${SED} -e "1s:^#!/usr/local/src/bin/calc/calc:#!${BINDIR}/calc:" $?>$@
 	@${CHMOD} +x $@
 powerterm: powerterm.calc
 	@${RM} -f $@
-	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${SED} -e "1s:^#!/usr/local/src/bin/calc/calc:#!${BINDIR}/calc:" $?>$@
 	@${CHMOD} +x $@
 simple: simple.calc
 	@${RM} -f $@
-	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${SED} -e "1s:^#!/usr/local/src/bin/calc/calc:#!${BINDIR}/calc:" $?>$@
 	@${CHMOD} +x $@
 square: square.calc
 	@${RM} -f $@
-	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${SED} -e "1s:^#!/usr/local/src/bin/calc/calc:#!${BINDIR}/calc:" $?>$@
 	@${CHMOD} +x $@

cscript/README.src

@@ -7,7 +7,7 @@ be useful!
 
 Please note that calc shell scripts must start with the line:
 
-    #!/usr/local/src/cmd/calc/calc -q -f
+    #!/usr/local/src/bin/calc/calc -q -f
 
 The above line MUST start in column 1 of the first line.   The first line
 must also end in -f.  The -q is optional, but is recommended to disable
@@ -18,7 +18,7 @@ Comments must be /* c-like comment */ or start with a double ## symbol.
 
 This is the correct way to form a calc shell script:
 
-    #!/usr/local/src/cmd/calc/calc -q -f
+    #!/usr/local/src/bin/calc/calc -q -f
 
     /* a correct comment */
     ## another correct comment
@@ -36,27 +36,51 @@ For more informaton about calc command lines, see "help usage".
 
 This next example WRONG:
 
-    #!/usr/local/src/cmd/calc/calc -q
+    #!/usr/local/src/bin/calc/calc -q
 
     # This is not a calc calc comment because it has only a single #
     # You must to start comments with ## or /*
     # is is also wrong because the first line does not end in -f
     print "This example has invalid comments"
 
-#####
-
-If you write something that you think is useful, please send it to:
-
-    calc-contrib at asthe dot com
-
-    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-    [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
+=-=
 
 For more info, see:
 
     help script
     help cscript
 
+#####
+
+If you write something that you think is useful, please join the
+low volume calc mailing list calc-tester.  Then send your contribution
+to the calc-tester mailing list.
+
+To subscribe to the calc-tester mailing list, visit the following URL:
+
+	http://www.isthe.com/chongo/tech/comp/calc/calc-tester.html
+
+    This is a low volume moderated mailing list.
+
+    This mailing list replaces calc-tester at asthe dot com list.
+
+    If you need a human to help you with your mailing list subscription,
+    please send EMail to our special:
+
+	calc-tester-maillist-help at asthe dot com
+
+	NOTE: Remove spaces and replace 'at' with @, 'dot' with .
+
+    address.  To be sure we see your EMail asking for help with your
+    mailing list subscription, please use the following phase in your
+    EMail Subject line:
+
+	calc tester mailing list help
+
+    That phrase in your subject line will help ensure your
+    request will get past our anti-spam filters.  You may have
+    additional words in your subject line.
+
 =-=
 
 4dsphere
@@ -101,7 +125,7 @@ simple
 
     A trivial example of a calc shell script.
 
-## Copyright (C) 1999  Landon Curt Noll
+## Copyright (C) 1999,2014  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -117,8 +141,8 @@ simple
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 30.1 $
-## @(#) $Id: README.src,v 30.1 2007/03/16 11:12:11 chongo Exp $
+## @(#) $Revision: 30.5 $
+## @(#) $Id: README.src,v 30.5 2014/10/12 12:23:43 chongo Exp $
 ## @(#) $Source: /usr/local/src/bin/calc/cscript/RCS/README.src,v $
 ##
 ## Under source code control:	1999/12/17 10:23:40

cscript/fproduct.calc

@@ -1,4 +1,4 @@
-#!/usr/local/src/cmd/calc/calc -q -s -f
+#!/usr/local/src/bin/calc/calc -q -s -f
 /*
  * fproduct - write the big Endian product of terms to a file
  *
@@ -8,7 +8,7 @@
  *	filename	where to write the product, use - for stdout
  *	term ...	terms to multiply
  *
- * Copyright (C) 2001  Landon Curt Noll
+ * Copyright (C) 2001,2014  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -24,8 +24,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: fproduct.calc,v 30.1 2007/03/16 11:12:11 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: fproduct.calc,v 30.3 2014/08/24 22:04:32 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cscript/RCS/fproduct.calc,v $
  *
  * Under source code control:   2001/04/07 20:13:11

cscript/mersenne.calc

@@ -1,8 +1,8 @@
-#!/usr/local/src/cmd/calc/calc -q -s -f
+#!/usr/local/src/bin/calc/calc -q -s -f
 /*
  * mersenne - print the value of a mersenne number
  *
- * Copyright (C) 1999-2007  Landon Curt Noll
+ * Copyright (C) 1999-2007,2014  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -18,8 +18,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: mersenne.calc,v 30.1 2007/03/16 11:12:11 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: mersenne.calc,v 30.3 2014/08/24 22:04:32 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cscript/RCS/mersenne.calc,v $
  *
  * Under source code control:	1999/11/30 00:09:01;

cscript/piforever.calc

@@ -1,8 +1,8 @@
-#!/usr/local/src/cmd/calc/calc -q -f
+#!/usr/local/src/bin/calc/calc -q -f
 /*
  * piforever - print digits of pi forever (or as long as your mem/cpu allow)
  *
- * Copyright (C) 1999-2007  Landon Curt Noll
+ * Copyright (C) 1999-2007,2014  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -18,8 +18,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: piforever.calc,v 30.1 2007/03/16 11:12:11 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: piforever.calc,v 30.3 2014/08/24 22:04:32 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cscript/RCS/piforever.calc,v $
  *
  * Under source code control:	1999/11/30 00:11:36

cscript/plus.calc

@@ -1,8 +1,8 @@
-#!/usr/local/src/cmd/calc/calc -q -f
+#!/usr/local/src/bin/calc/calc -q -f
 /*
  * plus - add two or more arguments together
  *
- * Copyright (C) 1999-2007  Landon Curt Noll
+ * Copyright (C) 1999-2007,2014  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -18,8 +18,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: plus.calc,v 30.1 2007/03/16 11:12:11 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: plus.calc,v 30.3 2014/08/24 22:04:32 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cscript/RCS/plus.calc,v $
  *
  * Under source code control:	1999/11/29 10:22:37

cscript/powerterm.calc

@@ -1,4 +1,4 @@
-#!/usr/local/src/cmd/calc/calc -q -s -f
+#!/usr/local/src/bin/calc/calc -q -s -f
 /*
  * powerterm - print the argument as a sum of powers of integers
  *
@@ -8,7 +8,7 @@
  *	base_limit	largest base we will consider (def: 10000)
  *      value		value to convert into sums of powers of integers
  *
- * Copyright (C) 2001  Landon Curt Noll
+ * Copyright (C) 2001,2014  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the powerterm of the version 2.1 of the GNU Lesser General Public License
@@ -24,8 +24,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: powerterm.calc,v 30.1 2007/03/16 11:12:11 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: powerterm.calc,v 30.3 2014/08/24 22:04:32 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cscript/RCS/powerterm.calc,v $
  *
  * Under source code control:   2001/04/24 23:49:11

cscript/simple.calc

@@ -1,8 +1,8 @@
-#!/usr/local/src/cmd/calc/calc -q -f
+#!/usr/local/src/bin/calc/calc -q -f
 /*
  * simple - an example of a simple calc shell script
  *
- * Copyright (C) 1999-2007  Landon Curt Noll
+ * Copyright (C) 1999-2007,2014  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -18,8 +18,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: simple.calc,v 30.1 2007/03/16 11:12:11 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: simple.calc,v 30.3 2014/08/24 22:04:32 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cscript/RCS/simple.calc,v $
  *
  * Under source code control:	1999/11/29 10:22:37

cscript/square.calc

@@ -1,8 +1,8 @@
-#!/usr/local/src/cmd/calc/calc -q -f
+#!/usr/local/src/bin/calc/calc -q -f
 /*
  * sqaure - print the squares of input values
  *
- * Copyright (C) 2000-2007  Ernest Bowen
+ * Copyright (C) 2000-2007,2014  Ernest Bowen
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -18,8 +18,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: square.calc,v 30.1 2007/03/16 11:12:11 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: square.calc,v 30.3 2014/08/24 22:04:32 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/cscript/RCS/square.calc,v $
  *
  * Under source code control:	2000/12/15 06:52:01

custom/Makefile

@@ -2,7 +2,7 @@
 #
 # custom - makefile for calc custom routines
 #
-# Copyright (C) 1999-2006  Landon Curt Noll
+# Copyright (C) 1999-2006,2014  Landon Curt Noll
 #
 # Calc is open software; you can redistribute it and/or modify it under
 # the terms of the version 2.1 of the GNU Lesser General Public License
@@ -18,9 +18,9 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.28 $
-# @(#) $Id: Makefile.head,v 30.28 2013/08/11 05:40:18 chongo Exp $
-# @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/Makefile.head,v $
+# @(#) $Revision: 30.39 $
+# @(#) $Id: Makefile.head,v 30.39 2016/01/17 09:02:17 chongo Exp $
+# @(#) $Source: /usr/local/src/bin/calc/custom/RCS/Makefile.head,v $
 #
 # Under source code control:	1997/03/09 02:28:54
 # File existed as early as:	1997
@@ -337,20 +337,6 @@ CALC_ENV= CALCPATH=./cal
 ALLOW_CUSTOM= -DCUSTOM
 #ALLOW_CUSTOM=
 
-# The install rule uses:
-#
-#	${MKDIR} ${MKDIR_ARG}
-#
-# to create directorties.  Normall this amounts to usins mkdir -p dir ...
-# Some older systems may not have mkdir -p.  If you system does not
-# make mkdir -p, then set MKDIR_ARG to empty.
-#
-# MKDIR_ARG= -p			# use mkdir -p when creating paths
-# MKDIR_ARG=			# use if system does not understand mkdir -p
-#
-MKDIR_ARG= -p
-#MKDIR_ARG=
-
 # Some out of date operating systems require / want an executable to
 # end with a certain file extension.  Some compile systems such as
 # Cygwin build calc as calc.exe.  The EXT variable is used to denote
@@ -366,18 +352,12 @@ EXT=
 
 # The default calc versions
 #
-VERSION= 2.12.4.10
-VERS= 2.12.4
-VER= 2.12
-VE= 2
+VERSION= 2.12.5.2
 
 # Names of shared libraries with versions
 #
 LIB_EXT= .so
 LIB_EXT_VERSION= ${LIB_EXT}.${VERSION}
-LIB_EXT_VERS= ${LIB_EXT}.${VERS}
-LIB_EXT_VER= ${LIB_EXT}.${VER}
-LIB_EXT_VE= ${LIB_EXT}.${VE}
 
 # standard tools
 #
@@ -473,29 +453,40 @@ LDFLAGS= ${LD_DEBUG} ${ILDFLAGS}
 #	BLD_TYPE= calc-static-only
 #
 # CC_SHARE are flags given to ${CC} to build .o files suitable for shared libs
-# DEFAULT_LIB_INSTALL_PATH is where calc progs look for calc shared libs
+# DEFAULT_LIB_INSTALL_PATH is where calc programs look for calc shared libs
 # LD_SHARE are common flags given to ${CC} to link with shared libraries
-# LIBCALC_SHLIB are flags given to ${CC} to build libcalc shared lib
+# LIBCALC_SHLIB are flags given to ${CC} to build libcalc shared libraries
 # LIBCUSTCALC_SHLIB are flags given to ${CC} to build libcustcalc shared lib
 #
 #	NOTE: The above 4 values are unused if BLD_TYPE= calc-static-only
 #
 # CC_STATIC are flags given to ${CC} to build .o files suitable for static libs
 # LD_STATIC are common flags given to ${CC} to link with static libraries
-# LIBCALC_STATIC are flags given to ${CC} to build libcalc static lib
+# LIBCALC_STATIC are flags given to ${CC} to build libcalc static libraries
 # LIBCUSTCALC_STATIC are flags given to ${CC} to build libcustcalc static lib
 #
 #	NOTE: The above 4 values are unused if BLD_TYPE= calc-dynamic-only
 #
 # CCOPT are flags given to ${CC} for optimization
 # CCWARN are flags given to ${CC} for warning message control
+#
+# WNO_IMPLICT, WNO_ERROR_LONG_LONG and WNO_LONG_LONG are given to ${CC}
+#	when compiling special .o files that may need special compile options
+#	NOTE: These flags simply turn off certain compiler warnings,
+#	      which is useful only when CCWERR is set to -Werror.
+#	NOTE: If your compiler does not have these -Wno files, just
+#	      set these variables to nothing as in:
+#		WNO_IMPLICT=
+#		WNO_ERROR_LONG_LONG=
+#		WNO_LONG_LONG=
+#
 # CCWERR are flags given to ${CC} to make warnings fatal errors
 #	NOTE: CCWERR is only set in development Makefiles and must only be
 #	      used with ${CC}, not ${LCC}.  If you do not want the compiler
 #	      to abort on warnings, then leave CCWERR blank.
 # CCMISC are misc flags given to ${CC}
 #
-# LCC how the C compiler is invoked on locally executed intermediate progs
+# LCC is how the C compiler is invoked on locally executed intermediate programs
 # CC is how the C compiler is invoked (with an optional Purify)
 #
 # Specific target overrides or modifications to default values
@@ -535,7 +526,10 @@ LD_STATIC=
 LIBCALC_STATIC=
 LIBCUSTCALC_STATIC=
 #
-CCWARN= -Wall -W -Wno-comment
+CCWARN= -Wall
+WNO_IMPLICT= -Wno-implicit
+WNO_ERROR_LONG_LONG= -Wno-error=long-long
+WNO_LONG_LONG= -Wno-long-long
 CCWERR=
 CCOPT= ${DEBUG}
 CCMISC=
@@ -545,9 +539,9 @@ CC= ${PURIFY} ${LCC} ${CCWERR}
 #
 endif
 
-#################################
-# Apple MacOS X / Darwin target #
-#################################
+##############################
+# Apple OS X / Darwin target #
+##############################
 
 ifeq ($(target),Darwin)
 #
@@ -556,9 +550,23 @@ BLD_TYPE= calc-dynamic-only
 CC_SHARE= -fPIC
 DEFAULT_LIB_INSTALL_PATH= ${PWD}:${LIBDIR}:/usr/local/lib
 LD_SHARE= ${DARWIN_ARCH}
-LIBCALC_SHLIB= -single_module -undefined dynamic_lookup -dynamiclib
+#SET_INSTALL_NAME= no
+SET_INSTALL_NAME= yes
+ifeq ($(SET_INSTALL_NAME),yes)
+LIBCALC_SHLIB= -single_module -undefined dynamic_lookup -dynamiclib \
+    -install_name ${LIBDIR}/libcalc${LIB_EXT_VERSION} ${DARWIN_ARCH}
+else
+LIBCALC_SHLIB= -single_module -undefined dynamic_lookup -dynamiclib \
+    ${DARWIN_ARCH}
+endif
 ifdef ALLOW_CUSTOM
-LIBCUSTCALC_SHLIB= -single_module -undefined dynamic_lookup -dynamiclib
+ifeq ($(SET_INSTALL_NAME),yes)
+LIBCUSTCALC_SHLIB= -single_module -undefined dynamic_lookup -dynamiclib \
+    -install_name ${LIBDIR}/libcustcalc${LIB_EXT_VERSION} ${DARWIN_ARCH}
+else
+LIBCUSTCALC_SHLIB= -single_module -undefined dynamic_lookup -dynamiclib \
+    ${DARWIN_ARCH}
+endif
 else
 LIBCUSTCALC_SHLIB=
 endif
@@ -568,28 +576,37 @@ LD_STATIC= ${DARWIN_ARCH}
 LIBCALC_STATIC=
 LIBCUSTCALC_STATIC=
 #
-CCWARN= -Wall -W -Wno-comment
+CCWARN= -Wall
+WNO_IMPLICT= -Wno-implicit
+WNO_ERROR_LONG_LONG= -Wno-error=long-long
+WNO_LONG_LONG= -Wno-long-long
 CCWERR=
 CCOPT= ${DEBUG}
 CCMISC= ${DARWIN_ARCH}
 #
-LCC= MACOSX_DEPLOYMENT_TARGET=${MACOSX_DEPLOYMENT_TARGET} gcc
+LCC= clang
 CC= ${PURIFY} ${LCC} ${CCWERR}
 #
-# Darmin dynamic shared lib filenames
+# Darwin dynamic shared lib filenames
 LIB_EXT:= .dylib
 LIB_EXT_VERSION:= .${VERSION}${LIB_EXT}
-LIB_EXT_VERS:= .${VERS}${LIB_EXT}
-LIB_EXT_VER:= .${VER}${LIB_EXT}
-LIB_EXT_VE:= .${VE}${LIB_EXT}
 # LDCONFIG not required on this platform, so we redefine it to an empty string
 LDCONFIG:=
 # DARWIN_ARCH= -arch i386 -arch ppc	# Universal binary
 # DARWIN_ARCH= -arch i386		# Intel binary
 # DARWIN_ARCH= -arch ppc		# PPC binary
+# DARWIN_ARCH= -arch x86_64		# native 64-bit binary
 DARWIN_ARCH=				# native binary
-MACOSX_DEPLOYMENT_TARGET=10.8
 #
+# Starting with El Capitan OS X 10.11, root by default could not
+# mkdir under system locations, so we now use the /opt/calc tree.
+#
+OPTDIR:= /opt/calc
+BINDIR:= /${OPTDIR}/bin
+LIBDIR:= /${OPTDIR}/lib
+CALC_SHAREDIR:= /${OPTDIR}/share
+CALC_INCDIR:= /${OPTDIR}/include
+SCRIPTDIR:= ${BINDIR}/cscript
 endif
 
 ##################
@@ -622,7 +639,10 @@ LD_STATIC=
 LIBCALC_STATIC=
 LIBCUSTCALC_STATIC=
 #
-CCWARN= -Wall -W -Wno-comment
+CCWARN= -Wall
+WNO_IMPLICT= -Wno-implicit
+WNO_ERROR_LONG_LONG= -Wno-error=long-long
+WNO_LONG_LONG= -Wno-long-long
 CCWERR=
 CCOPT= ${DEBUG}
 CCMISC=
@@ -665,6 +685,9 @@ LIBCALC_STATIC=
 LIBCUSTCALC_STATIC=
 #
 CCWARN= -Wall
+WNO_IMPLICT= -Wno-implicit
+WNO_ERROR_LONG_LONG= -Wno-error=long-long
+WNO_LONG_LONG= -Wno-long-long
 CCWERR=
 CCOPT= ${DEBUG}
 CCMISC=
@@ -680,7 +703,6 @@ endif
 # SunOS target #
 ################
 
-# XXX - this needs to be tested
 ifeq ($(target),SunOS)
 #
 BLD_TYPE= calc-dynamic-only
@@ -701,7 +723,10 @@ LIBCALC_STATIC=
 LIBCUSTCALC_STATIC=
 LD_STATIC=
 #
-CCWARN= -Wall -W -Wno-comment
+CCWARN= -Wall
+WNO_IMPLICT= -Wno-implicit
+WNO_ERROR_LONG_LONG= -Wno-error=long-long
+WNO_LONG_LONG= -Wno-long-long
 CCWERR=
 CCOPT= ${DEBUG}
 CCMISC=
@@ -735,7 +760,10 @@ LIBCALC_STATIC=
 LIBCUSTCALC_STATIC=
 LD_STATIC=
 #
-CCWARN= -Wall -W -Wno-comment
+CCWARN= -Wall
+WNO_IMPLICT= -Wno-implicit
+WNO_ERROR_LONG_LONG= -Wno-error=long-long
+WNO_LONG_LONG= -Wno-long-long
 CCWERR=
 CCOPT= ${DEBUG}
 CCMISC=
@@ -769,7 +797,10 @@ LD_STATIC=
 LIBCALC_STATIC=
 LIBCUSTCALC_STATIC=
 #
-CCWARN= -Wall -W -Wno-comment
+CCWARN= -Wall
+WNO_IMPLICT= -Wno-implicit
+WNO_ERROR_LONG_LONG= -Wno-error=long-long
+WNO_LONG_LONG= -Wno-long-long
 CCWERR=
 CCOPT= ${DEBUG}
 CCMISC=
@@ -779,10 +810,10 @@ CC= ${PURIFY} ${LCC} ${CCWERR}
 #
 # The simple makefile forces the use of static ${CC} flags
 #
-# ICFLAGS are given to ${CC} for intermediate progs used to help compile calc
-# CFLAGS are given to ${CC} for calc progs other than intermediate progs
-# ILDFLAGS for ${CC} in linking intermediate progs used to help compile calc
-# LDFLAGS for ${CC} in linking calc progs other than intermediate progs
+# ICFLAGS are given to ${CC} for intermediate programs used to help compile calc
+# CFLAGS are given to ${CC} for calc programs other than intermediate programs
+# ILDFLAGS for ${CC} in linking intermediate programs used to help compile calc
+# LDFLAGS for ${CC} in linking calc programs other than intermediate programs
 #
 ICFLAGS= ${COMMON_CFLAGS} ${CC_STATIC}
 CFLAGS= ${ICFLAGS} ${CCOPT}
@@ -829,7 +860,10 @@ LIBCALC_STATIC=
 LIBCUSTCALC_STATIC=
 LD_STATIC=
 #
-CCWARN= -Wall -W -Wno-comment
+CCWARN= -Wall
+WNO_IMPLICT= -Wno-implicit
+WNO_ERROR_LONG_LONG= -Wno-error=long-long
+WNO_LONG_LONG= -Wno-long-long
 CCWERR=
 CCOPT= ${DEBUG}
 CCMISC= -DNOTCYGWIN
@@ -866,7 +900,10 @@ LIBCALC_STATIC=
 LIBCUSTCALC_STATIC=
 LD_STATIC=
 #
-CCWARN= -Wall -W -Wno-comment
+CCWARN= -Wall
+WNO_IMPLICT= -Wno-implicit
+WNO_ERROR_LONG_LONG= -Wno-error=long-long
+WNO_LONG_LONG= -Wno-long-long
 CCWERR=
 CCOPT= ${DEBUG}
 CCMISC=
@@ -882,8 +919,8 @@ endif
 
 # Required flags to compile C files for calc
 #
-# ICFLAGS are given to ${CC} for intermediate progs used to help compile calc
-# CFLAGS are given to ${CC} for calc progs other than intermediate progs
+# ICFLAGS are given to ${CC} for intermediate programs used to help compile calc
+# CFLAGS are given to ${CC} for calc programs other than intermediate programs
 #
 # NOTE: This does not work for: make-XYZ-only and BLD_TYPE != make-XYZ-only
 #
@@ -896,8 +933,8 @@ CFLAGS= ${ICFLAGS} ${CCOPT}
 
 # Required flags to link files for calc
 #
-# ILDFLAGS for ${CC} in linking intermediate progs used to help compile calc
-# LDFLAGS for ${CC} in linking calc progs other than intermediate progs
+# ILDFLAGS for ${CC} in linking intermediate programs used to help compile calc
+# LDFLAGS for ${CC} in linking calc programs other than intermediate programs
 #
 ILDFLAGS= ${COMMON_LDFLAGS}
 LDFLAGS= ${LD_DEBUG} ${ILDFLAGS}
@@ -1086,8 +1123,8 @@ depend:
 	fi
 	${Q} echo forming custom/skel
 	${Q} ${RM} -rf skel
-	${Q} ${MKDIR} skel
-	${Q} ${MKDIR} skel/custom
+	${Q} ${MKDIR} -p skel
+	${Q} ${MKDIR} -p skel/custom
 	-${Q} for i in ${C_SRC} /dev/null; do \
 	    if [ X"$$i" != X"/dev/null" ]; then \
 		${SED} -n '/^#[	 ]*include[	 ]*"/p' \
@@ -1198,11 +1235,10 @@ clobber: clean
 	${RM} -f ${BLD_TYPE}
 	${RM} -f .all ${MAKE_FILE}.tmp ${MAKE_FILE}.bak
 	${RM} -f libcustcalc${LIB_EXT_VERSION}
-	${RM} -f libcustcalc${LIB_EXT_VERS}
-	${RM} -f libcustcalc${LIB_EXT_VER}
-	${RM} -f libcustcalc${LIB_EXT_VE}
 	${RM} -f libcustcalc${LIB_EXT}
+	${RM} -f libcustcalc.*.dylib
 	${RM} -f libcustcalc.a
+	${V} echo remove files that are obsolete
 #if 0	/* start of skip for non-Gnu makefiles */
 	${RM} -f Makefile.simple
 #endif	/* end of skip for non-Gnu makefiles */
@@ -1212,9 +1248,21 @@ clobber: clean
 # NOTE: Keep the uninstall rule in reverse order to the install rule
 #
 install: all
+	-${Q} if [ ! -d ${T}${LIBDIR} ]; then \
+	    echo ${MKDIR} -p ${T}${LIBDIR}; \
+	    ${MKDIR} -p ${T}${LIBDIR}; \
+	    if [ ! -d "${T}${LIBDIR}" ]; then \
+		echo ${MKDIR} -p "${T}${LIBDIR}"; \
+		${MKDIR} -p "${T}${LIBDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 ${T}${LIBDIR}; \
+	    ${CHMOD} 0755 ${T}${LIBDIR}; \
+	else \
+	    ${TRUE}; \
+	fi
 	-${Q} if [ ! -d ${T}${INCDIR} ]; then \
-	    echo ${MKDIR} ${T}${INCDIR}; \
-	    ${MKDIR} ${T}${INCDIR}; \
+	    echo ${MKDIR} -p ${T}${INCDIR}; \
+	    ${MKDIR} -p ${T}${INCDIR}; \
 	    if [ ! -d "${T}${INCDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${INCDIR}"; \
 		${MKDIR} -p "${T}${INCDIR}"; \
@@ -1225,8 +1273,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CALC_SHAREDIR} ]; then \
-	    echo ${MKDIR} ${T}${CALC_SHAREDIR}; \
-	    ${MKDIR} ${T}${CALC_SHAREDIR}; \
+	    echo ${MKDIR} -p ${T}${CALC_SHAREDIR}; \
+	    ${MKDIR} -p ${T}${CALC_SHAREDIR}; \
 	    if [ ! -d "${T}${CALC_SHAREDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CALC_SHAREDIR}"; \
 		${MKDIR} -p "${T}${CALC_SHAREDIR}"; \
@@ -1237,8 +1285,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CALC_INCDIR} ]; then \
-	    echo ${MKDIR} ${T}${CALC_INCDIR}; \
-	    ${MKDIR} ${T}${CALC_INCDIR}; \
+	    echo ${MKDIR} -p ${T}${CALC_INCDIR}; \
+	    ${MKDIR} -p ${T}${CALC_INCDIR}; \
 	    if [ ! -d "${T}${CALC_INCDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CALC_INCDIR}"; \
 		${MKDIR} -p "${T}${CALC_INCDIR}"; \
@@ -1249,8 +1297,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${HELPDIR} ]; then \
-	    echo ${MKDIR} ${T}${HELPDIR}; \
-	    ${MKDIR} ${T}${HELPDIR}; \
+	    echo ${MKDIR} -p ${T}${HELPDIR}; \
+	    ${MKDIR} -p ${T}${HELPDIR}; \
 	    if [ ! -d "${T}${HELPDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${HELPDIR}"; \
 		${MKDIR} -p "${T}${HELPDIR}"; \
@@ -1261,8 +1309,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CUSTOMCALDIR} ]; then \
-	    echo ${MKDIR} ${T}${CUSTOMCALDIR}; \
-	    ${MKDIR} ${T}${CUSTOMCALDIR}; \
+	    echo ${MKDIR} -p ${T}${CUSTOMCALDIR}; \
+	    ${MKDIR} -p ${T}${CUSTOMCALDIR}; \
 	    if [ ! -d "${T}${CUSTOMCALDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CUSTOMCALDIR}"; \
 		${MKDIR} -p "${T}${CUSTOMCALDIR}"; \
@@ -1273,8 +1321,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CUSTOMHELPDIR} ]; then \
-	    echo ${MKDIR} ${T}${CUSTOMHELPDIR}; \
-	    ${MKDIR} ${T}${CUSTOMHELPDIR}; \
+	    echo ${MKDIR} -p ${T}${CUSTOMHELPDIR}; \
+	    ${MKDIR} -p ${T}${CUSTOMHELPDIR}; \
 	    if [ ! -d "${T}${CUSTOMHELPDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CUSTOMHELPDIR}"; \
 		${MKDIR} -p "${T}${CUSTOMHELPDIR}"; \
@@ -1285,8 +1333,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CUSTOMINCDIR} ]; then \
-	    echo ${MKDIR} ${T}${CUSTOMINCDIR}; \
-	    ${MKDIR} ${T}${CUSTOMINCDIR}; \
+	    echo ${MKDIR} -p ${T}${CUSTOMINCDIR}; \
+	    ${MKDIR} -p ${T}${CUSTOMINCDIR}; \
 	    if [ ! -d "${T}${CUSTOMINCDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CUSTOMINCDIR}"; \
 		${MKDIR} -p "${T}${CUSTOMINCDIR}"; \

custom/Makefile.head

@@ -2,7 +2,7 @@
 #
 # custom - makefile for calc custom routines
 #
-# Copyright (C) 1999-2006  Landon Curt Noll
+# Copyright (C) 1999-2006,2014  Landon Curt Noll
 #
 # Calc is open software; you can redistribute it and/or modify it under
 # the terms of the version 2.1 of the GNU Lesser General Public License
@@ -18,9 +18,9 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.28 $
-# @(#) $Id: Makefile.head,v 30.28 2013/08/11 05:40:18 chongo Exp $
-# @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/Makefile.head,v $
+# @(#) $Revision: 30.39 $
+# @(#) $Id: Makefile.head,v 30.39 2016/01/17 09:02:17 chongo Exp $
+# @(#) $Source: /usr/local/src/bin/calc/custom/RCS/Makefile.head,v $
 #
 # Under source code control:	1997/03/09 02:28:54
 # File existed as early as:	1997
@@ -337,20 +337,6 @@ CALC_ENV= CALCPATH=./cal
 ALLOW_CUSTOM= -DCUSTOM
 #ALLOW_CUSTOM=
 
-# The install rule uses:
-#
-#	${MKDIR} ${MKDIR_ARG}
-#
-# to create directorties.  Normall this amounts to usins mkdir -p dir ...
-# Some older systems may not have mkdir -p.  If you system does not
-# make mkdir -p, then set MKDIR_ARG to empty.
-#
-# MKDIR_ARG= -p			# use mkdir -p when creating paths
-# MKDIR_ARG=			# use if system does not understand mkdir -p
-#
-MKDIR_ARG= -p
-#MKDIR_ARG=
-
 # Some out of date operating systems require / want an executable to
 # end with a certain file extension.  Some compile systems such as
 # Cygwin build calc as calc.exe.  The EXT variable is used to denote
@@ -366,18 +352,12 @@ EXT=
 
 # The default calc versions
 #
-VERSION= 2.12.4.10
-VERS= 2.12.4
-VER= 2.12
-VE= 2
+VERSION= 2.12.5.2
 
 # Names of shared libraries with versions
 #
 LIB_EXT= .so
 LIB_EXT_VERSION= ${LIB_EXT}.${VERSION}
-LIB_EXT_VERS= ${LIB_EXT}.${VERS}
-LIB_EXT_VER= ${LIB_EXT}.${VER}
-LIB_EXT_VE= ${LIB_EXT}.${VE}
 
 # standard tools
 #

custom/Makefile.simple

@@ -2,7 +2,7 @@
 #
 # custom - makefile for calc custom routines
 #
-# Copyright (C) 1999-2006  Landon Curt Noll
+# Copyright (C) 1999-2006,2014  Landon Curt Noll
 #
 # Calc is open software; you can redistribute it and/or modify it under
 # the terms of the version 2.1 of the GNU Lesser General Public License
@@ -18,9 +18,9 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.28 $
-# @(#) $Id: Makefile.head,v 30.28 2013/08/11 05:40:18 chongo Exp $
-# @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/Makefile.head,v $
+# @(#) $Revision: 30.39 $
+# @(#) $Id: Makefile.head,v 30.39 2016/01/17 09:02:17 chongo Exp $
+# @(#) $Source: /usr/local/src/bin/calc/custom/RCS/Makefile.head,v $
 #
 # Under source code control:	1997/03/09 02:28:54
 # File existed as early as:	1997
@@ -322,20 +322,6 @@ CALC_ENV= CALCPATH=./cal
 ALLOW_CUSTOM= -DCUSTOM
 #ALLOW_CUSTOM=
 
-# The install rule uses:
-#
-#	${MKDIR} ${MKDIR_ARG}
-#
-# to create directorties.  Normall this amounts to usins mkdir -p dir ...
-# Some older systems may not have mkdir -p.  If you system does not
-# make mkdir -p, then set MKDIR_ARG to empty.
-#
-# MKDIR_ARG= -p			# use mkdir -p when creating paths
-# MKDIR_ARG=			# use if system does not understand mkdir -p
-#
-MKDIR_ARG= -p
-#MKDIR_ARG=
-
 # Some out of date operating systems require / want an executable to
 # end with a certain file extension.  Some compile systems such as
 # Cygwin build calc as calc.exe.  The EXT variable is used to denote
@@ -351,18 +337,12 @@ EXT=
 
 # The default calc versions
 #
-VERSION= 2.12.4.10
-VERS= 2.12.4
-VER= 2.12
-VE= 2
+VERSION= 2.12.5.2
 
 # Names of shared libraries with versions
 #
 LIB_EXT= .so
 LIB_EXT_VERSION= ${LIB_EXT}.${VERSION}
-LIB_EXT_VERS= ${LIB_EXT}.${VERS}
-LIB_EXT_VER= ${LIB_EXT}.${VER}
-LIB_EXT_VE= ${LIB_EXT}.${VE}
 
 # standard tools
 #
@@ -433,29 +413,40 @@ COMMON_LDFLAGS= ${EXTRA_LDFLAGS}
 #	BLD_TYPE= calc-static-only
 #
 # CC_SHARE are flags given to ${CC} to build .o files suitable for shared libs
-# DEFAULT_LIB_INSTALL_PATH is where calc progs look for calc shared libs
+# DEFAULT_LIB_INSTALL_PATH is where calc programs look for calc shared libs
 # LD_SHARE are common flags given to ${CC} to link with shared libraries
-# LIBCALC_SHLIB are flags given to ${CC} to build libcalc shared lib
+# LIBCALC_SHLIB are flags given to ${CC} to build libcalc shared libraries
 # LIBCUSTCALC_SHLIB are flags given to ${CC} to build libcustcalc shared lib
 #
 #	NOTE: The above 4 values are unused if BLD_TYPE= calc-static-only
 #
 # CC_STATIC are flags given to ${CC} to build .o files suitable for static libs
 # LD_STATIC are common flags given to ${CC} to link with static libraries
-# LIBCALC_STATIC are flags given to ${CC} to build libcalc static lib
+# LIBCALC_STATIC are flags given to ${CC} to build libcalc static libraries
 # LIBCUSTCALC_STATIC are flags given to ${CC} to build libcustcalc static lib
 #
 #	NOTE: The above 4 values are unused if BLD_TYPE= calc-dynamic-only
 #
 # CCOPT are flags given to ${CC} for optimization
 # CCWARN are flags given to ${CC} for warning message control
+#
+# WNO_IMPLICT, WNO_ERROR_LONG_LONG and WNO_LONG_LONG are given to ${CC}
+#	when compiling special .o files that may need special compile options
+#	NOTE: These flags simply turn off certain compiler warnings,
+#	      which is useful only when CCWERR is set to -Werror.
+#	NOTE: If your compiler does not have these -Wno files, just
+#	      set these variables to nothing as in:
+#		WNO_IMPLICT=
+#		WNO_ERROR_LONG_LONG=
+#		WNO_LONG_LONG=
+#
 # CCWERR are flags given to ${CC} to make warnings fatal errors
 #	NOTE: CCWERR is only set in development Makefiles and must only be
 #	      used with ${CC}, not ${LCC}.  If you do not want the compiler
 #	      to abort on warnings, then leave CCWERR blank.
 # CCMISC are misc flags given to ${CC}
 #
-# LCC how the C compiler is invoked on locally executed intermediate progs
+# LCC is how the C compiler is invoked on locally executed intermediate programs
 # CC is how the C compiler is invoked (with an optional Purify)
 #
 # Specific target overrides or modifications to default values
@@ -485,7 +476,10 @@ LD_STATIC=
 LIBCALC_STATIC=
 LIBCUSTCALC_STATIC=
 #
-CCWARN= -Wall -W -Wno-comment
+CCWARN= -Wall
+WNO_IMPLICT= -Wno-implicit
+WNO_ERROR_LONG_LONG= -Wno-error=long-long
+WNO_LONG_LONG= -Wno-long-long
 CCWERR=
 CCOPT= ${DEBUG}
 CCMISC=
@@ -495,10 +489,10 @@ CC= ${PURIFY} ${LCC} ${CCWERR}
 #
 # The simple makefile forces the use of static ${CC} flags
 #
-# ICFLAGS are given to ${CC} for intermediate progs used to help compile calc
-# CFLAGS are given to ${CC} for calc progs other than intermediate progs
-# ILDFLAGS for ${CC} in linking intermediate progs used to help compile calc
-# LDFLAGS for ${CC} in linking calc progs other than intermediate progs
+# ICFLAGS are given to ${CC} for intermediate programs used to help compile calc
+# CFLAGS are given to ${CC} for calc programs other than intermediate programs
+# ILDFLAGS for ${CC} in linking intermediate programs used to help compile calc
+# LDFLAGS for ${CC} in linking calc programs other than intermediate programs
 #
 ICFLAGS= ${COMMON_CFLAGS} ${CC_STATIC}
 CFLAGS= ${ICFLAGS} ${CCOPT}
@@ -679,8 +673,8 @@ depend:
 	fi
 	${Q} echo forming custom/skel
 	${Q} ${RM} -rf skel
-	${Q} ${MKDIR} skel
-	${Q} ${MKDIR} skel/custom
+	${Q} ${MKDIR} -p skel
+	${Q} ${MKDIR} -p skel/custom
 	-${Q} for i in ${C_SRC} /dev/null; do \
 	    if [ X"$$i" != X"/dev/null" ]; then \
 		${SED} -n '/^#[	 ]*include[	 ]*"/p' \
@@ -791,20 +785,31 @@ clobber: clean
 	${RM} -f ${BLD_TYPE}
 	${RM} -f .all ${MAKE_FILE}.tmp ${MAKE_FILE}.bak
 	${RM} -f libcustcalc${LIB_EXT_VERSION}
-	${RM} -f libcustcalc${LIB_EXT_VERS}
-	${RM} -f libcustcalc${LIB_EXT_VER}
-	${RM} -f libcustcalc${LIB_EXT_VE}
 	${RM} -f libcustcalc${LIB_EXT}
+	${RM} -f libcustcalc.*.dylib
 	${RM} -f libcustcalc.a
+	${V} echo remove files that are obsolete
 
 # install everything
 #
 # NOTE: Keep the uninstall rule in reverse order to the install rule
 #
 install: all
+	-${Q} if [ ! -d ${T}${LIBDIR} ]; then \
+	    echo ${MKDIR} -p ${T}${LIBDIR}; \
+	    ${MKDIR} -p ${T}${LIBDIR}; \
+	    if [ ! -d "${T}${LIBDIR}" ]; then \
+		echo ${MKDIR} -p "${T}${LIBDIR}"; \
+		${MKDIR} -p "${T}${LIBDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 ${T}${LIBDIR}; \
+	    ${CHMOD} 0755 ${T}${LIBDIR}; \
+	else \
+	    ${TRUE}; \
+	fi
 	-${Q} if [ ! -d ${T}${INCDIR} ]; then \
-	    echo ${MKDIR} ${T}${INCDIR}; \
-	    ${MKDIR} ${T}${INCDIR}; \
+	    echo ${MKDIR} -p ${T}${INCDIR}; \
+	    ${MKDIR} -p ${T}${INCDIR}; \
 	    if [ ! -d "${T}${INCDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${INCDIR}"; \
 		${MKDIR} -p "${T}${INCDIR}"; \
@@ -815,8 +820,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CALC_SHAREDIR} ]; then \
-	    echo ${MKDIR} ${T}${CALC_SHAREDIR}; \
-	    ${MKDIR} ${T}${CALC_SHAREDIR}; \
+	    echo ${MKDIR} -p ${T}${CALC_SHAREDIR}; \
+	    ${MKDIR} -p ${T}${CALC_SHAREDIR}; \
 	    if [ ! -d "${T}${CALC_SHAREDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CALC_SHAREDIR}"; \
 		${MKDIR} -p "${T}${CALC_SHAREDIR}"; \
@@ -827,8 +832,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CALC_INCDIR} ]; then \
-	    echo ${MKDIR} ${T}${CALC_INCDIR}; \
-	    ${MKDIR} ${T}${CALC_INCDIR}; \
+	    echo ${MKDIR} -p ${T}${CALC_INCDIR}; \
+	    ${MKDIR} -p ${T}${CALC_INCDIR}; \
 	    if [ ! -d "${T}${CALC_INCDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CALC_INCDIR}"; \
 		${MKDIR} -p "${T}${CALC_INCDIR}"; \
@@ -839,8 +844,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${HELPDIR} ]; then \
-	    echo ${MKDIR} ${T}${HELPDIR}; \
-	    ${MKDIR} ${T}${HELPDIR}; \
+	    echo ${MKDIR} -p ${T}${HELPDIR}; \
+	    ${MKDIR} -p ${T}${HELPDIR}; \
 	    if [ ! -d "${T}${HELPDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${HELPDIR}"; \
 		${MKDIR} -p "${T}${HELPDIR}"; \
@@ -851,8 +856,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CUSTOMCALDIR} ]; then \
-	    echo ${MKDIR} ${T}${CUSTOMCALDIR}; \
-	    ${MKDIR} ${T}${CUSTOMCALDIR}; \
+	    echo ${MKDIR} -p ${T}${CUSTOMCALDIR}; \
+	    ${MKDIR} -p ${T}${CUSTOMCALDIR}; \
 	    if [ ! -d "${T}${CUSTOMCALDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CUSTOMCALDIR}"; \
 		${MKDIR} -p "${T}${CUSTOMCALDIR}"; \
@@ -863,8 +868,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CUSTOMHELPDIR} ]; then \
-	    echo ${MKDIR} ${T}${CUSTOMHELPDIR}; \
-	    ${MKDIR} ${T}${CUSTOMHELPDIR}; \
+	    echo ${MKDIR} -p ${T}${CUSTOMHELPDIR}; \
+	    ${MKDIR} -p ${T}${CUSTOMHELPDIR}; \
 	    if [ ! -d "${T}${CUSTOMHELPDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CUSTOMHELPDIR}"; \
 		${MKDIR} -p "${T}${CUSTOMHELPDIR}"; \
@@ -875,8 +880,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CUSTOMINCDIR} ]; then \
-	    echo ${MKDIR} ${T}${CUSTOMINCDIR}; \
-	    ${MKDIR} ${T}${CUSTOMINCDIR}; \
+	    echo ${MKDIR} -p ${T}${CUSTOMINCDIR}; \
+	    ${MKDIR} -p ${T}${CUSTOMINCDIR}; \
 	    if [ ! -d "${T}${CUSTOMINCDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CUSTOMINCDIR}"; \
 		${MKDIR} -p "${T}${CUSTOMINCDIR}"; \

custom/Makefile.tail

@@ -177,8 +177,8 @@ depend:
 	fi
 	${Q} echo forming custom/skel
 	${Q} ${RM} -rf skel
-	${Q} ${MKDIR} skel
-	${Q} ${MKDIR} skel/custom
+	${Q} ${MKDIR} -p skel
+	${Q} ${MKDIR} -p skel/custom
 	-${Q} for i in ${C_SRC} /dev/null; do \
 	    if [ X"$$i" != X"/dev/null" ]; then \
 		${SED} -n '/^#[	 ]*include[	 ]*"/p' \
@@ -289,11 +289,10 @@ clobber: clean
 	${RM} -f ${BLD_TYPE}
 	${RM} -f .all ${MAKE_FILE}.tmp ${MAKE_FILE}.bak
 	${RM} -f libcustcalc${LIB_EXT_VERSION}
-	${RM} -f libcustcalc${LIB_EXT_VERS}
-	${RM} -f libcustcalc${LIB_EXT_VER}
-	${RM} -f libcustcalc${LIB_EXT_VE}
 	${RM} -f libcustcalc${LIB_EXT}
+	${RM} -f libcustcalc.*.dylib
 	${RM} -f libcustcalc.a
+	${V} echo remove files that are obsolete
 #if 0	/* start of skip for non-Gnu makefiles */
 	${RM} -f Makefile.simple
 #endif	/* end of skip for non-Gnu makefiles */
@@ -303,9 +302,21 @@ clobber: clean
 # NOTE: Keep the uninstall rule in reverse order to the install rule
 #
 install: all
+	-${Q} if [ ! -d ${T}${LIBDIR} ]; then \
+	    echo ${MKDIR} -p ${T}${LIBDIR}; \
+	    ${MKDIR} -p ${T}${LIBDIR}; \
+	    if [ ! -d "${T}${LIBDIR}" ]; then \
+		echo ${MKDIR} -p "${T}${LIBDIR}"; \
+		${MKDIR} -p "${T}${LIBDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 ${T}${LIBDIR}; \
+	    ${CHMOD} 0755 ${T}${LIBDIR}; \
+	else \
+	    ${TRUE}; \
+	fi
 	-${Q} if [ ! -d ${T}${INCDIR} ]; then \
-	    echo ${MKDIR} ${T}${INCDIR}; \
-	    ${MKDIR} ${T}${INCDIR}; \
+	    echo ${MKDIR} -p ${T}${INCDIR}; \
+	    ${MKDIR} -p ${T}${INCDIR}; \
 	    if [ ! -d "${T}${INCDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${INCDIR}"; \
 		${MKDIR} -p "${T}${INCDIR}"; \
@@ -316,8 +327,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CALC_SHAREDIR} ]; then \
-	    echo ${MKDIR} ${T}${CALC_SHAREDIR}; \
-	    ${MKDIR} ${T}${CALC_SHAREDIR}; \
+	    echo ${MKDIR} -p ${T}${CALC_SHAREDIR}; \
+	    ${MKDIR} -p ${T}${CALC_SHAREDIR}; \
 	    if [ ! -d "${T}${CALC_SHAREDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CALC_SHAREDIR}"; \
 		${MKDIR} -p "${T}${CALC_SHAREDIR}"; \
@@ -328,8 +339,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CALC_INCDIR} ]; then \
-	    echo ${MKDIR} ${T}${CALC_INCDIR}; \
-	    ${MKDIR} ${T}${CALC_INCDIR}; \
+	    echo ${MKDIR} -p ${T}${CALC_INCDIR}; \
+	    ${MKDIR} -p ${T}${CALC_INCDIR}; \
 	    if [ ! -d "${T}${CALC_INCDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CALC_INCDIR}"; \
 		${MKDIR} -p "${T}${CALC_INCDIR}"; \
@@ -340,8 +351,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${HELPDIR} ]; then \
-	    echo ${MKDIR} ${T}${HELPDIR}; \
-	    ${MKDIR} ${T}${HELPDIR}; \
+	    echo ${MKDIR} -p ${T}${HELPDIR}; \
+	    ${MKDIR} -p ${T}${HELPDIR}; \
 	    if [ ! -d "${T}${HELPDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${HELPDIR}"; \
 		${MKDIR} -p "${T}${HELPDIR}"; \
@@ -352,8 +363,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CUSTOMCALDIR} ]; then \
-	    echo ${MKDIR} ${T}${CUSTOMCALDIR}; \
-	    ${MKDIR} ${T}${CUSTOMCALDIR}; \
+	    echo ${MKDIR} -p ${T}${CUSTOMCALDIR}; \
+	    ${MKDIR} -p ${T}${CUSTOMCALDIR}; \
 	    if [ ! -d "${T}${CUSTOMCALDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CUSTOMCALDIR}"; \
 		${MKDIR} -p "${T}${CUSTOMCALDIR}"; \
@@ -364,8 +375,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CUSTOMHELPDIR} ]; then \
-	    echo ${MKDIR} ${T}${CUSTOMHELPDIR}; \
-	    ${MKDIR} ${T}${CUSTOMHELPDIR}; \
+	    echo ${MKDIR} -p ${T}${CUSTOMHELPDIR}; \
+	    ${MKDIR} -p ${T}${CUSTOMHELPDIR}; \
 	    if [ ! -d "${T}${CUSTOMHELPDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CUSTOMHELPDIR}"; \
 		${MKDIR} -p "${T}${CUSTOMHELPDIR}"; \
@@ -376,8 +387,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${CUSTOMINCDIR} ]; then \
-	    echo ${MKDIR} ${T}${CUSTOMINCDIR}; \
-	    ${MKDIR} ${T}${CUSTOMINCDIR}; \
+	    echo ${MKDIR} -p ${T}${CUSTOMINCDIR}; \
+	    ${MKDIR} -p ${T}${CUSTOMINCDIR}; \
 	    if [ ! -d "${T}${CUSTOMINCDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CUSTOMINCDIR}"; \
 		${MKDIR} -p "${T}${CUSTOMINCDIR}"; \

custom/c_sysinfo.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: c_sysinfo.c,v 30.3 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: c_sysinfo.c,v 30.4 2013/09/01 22:16:21 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/custom/RCS/c_sysinfo.c,v $
  *
  * Under source code control:	1997/03/09 23:14:40
@@ -71,15 +71,15 @@ struct infoname {
 	FULL nmbr;	/* if str==NULL ==> value fo #define as a FULL */
 };
 STATIC struct infoname sys_info[] = {
-    {"S100", "slots in an subtractive 100 table", NULL, 
+    {"S100", "slots in an subtractive 100 table", NULL,
      (FULL)S100},
-    {"BASE", "base for calculations", NULL, 
+    {"BASE", "base for calculations", NULL,
      (FULL)BASE},
-    {"BASE1", "one less than base", NULL, 
+    {"BASE1", "one less than base", NULL,
      (FULL)BASE},
-    {"BASEB", "bits in the calculation base", NULL, 
+    {"BASEB", "bits in the calculation base", NULL,
      (FULL)BASEB},
-    {"BASEDIG", "number of digits in base", NULL, 
+    {"BASEDIG", "number of digits in base", NULL,
      (FULL)BASEDIG},
     {"BIG_ENDIAN", "Most Significant Byte first symbol", NULL,
      (FULL)BIG_ENDIAN},
@@ -89,7 +89,7 @@ STATIC struct infoname sys_info[] = {
      (FULL)BLK_DEF_MAXPRINT},
     {"BLUM_PREGEN", "non-default predefined Blum generators", NULL,
      (FULL)BLUM_PREGEN},
-    {"CALCEXT", "extension for files read in", CALCEXT, 
+    {"CALCEXT", "extension for files read in", CALCEXT,
      (FULL)0},
     {"CALC_BYTE_ORDER", "Byte order (LITTLE_ENDIAN or BIG_ENDIAN)", NULL,
      (FULL)CALC_BYTE_ORDER},
@@ -97,17 +97,17 @@ STATIC struct infoname sys_info[] = {
      (FULL)0},
     {"DEFAULTCALCBINDINGS", "default key bindings file", DEFAULTCALCBINDINGS,
      (FULL)0},
-    {"DEFAULTCALCHELP", "help file that -h prints", DEFAULTCALCHELP, 
+    {"DEFAULTCALCHELP", "help file that -h prints", DEFAULTCALCHELP,
      (FULL)0},
-    {"DEFAULTCALCPAGER", "default pager", DEFAULTCALCPAGER, 
+    {"DEFAULTCALCPAGER", "default pager", DEFAULTCALCPAGER,
      (FULL)0},
     {"DEFAULTCALCPATH", "default :-separated search path", DEFAULTCALCPATH,
      (FULL)0},
     {"DEFAULTCALCRC", "default :-separated startup file list", DEFAULTCALCRC,
      (FULL)0},
-    {"DEFAULTSHELL", "default shell to use", DEFAULTSHELL, 
+    {"DEFAULTSHELL", "default shell to use", DEFAULTSHELL,
      (FULL)0},
-    {"DEV_BITS", "device number size in bits", NULL, 
+    {"DEV_BITS", "device number size in bits", NULL,
      (FULL)DEV_BITS},
     {"DISPLAY_DEFAULT", "default digits for float display", NULL,
      (FULL)DISPLAY_DEFAULT},
@@ -115,135 +115,135 @@ STATIC struct infoname sys_info[] = {
      (FULL)EPSILONPREC_DEFAULT},
     {"EPSILON_DEFAULT", "allowed error for float calculations",
      EPSILON_DEFAULT, (FULL)0},
-    {"ERRMAX", "default errmax value", NULL, 
+    {"ERRMAX", "default errmax value", NULL,
      (FULL)ERRMAX},
-    {"E_USERDEF", "base of user defined errors", NULL, 
+    {"E_USERDEF", "base of user defined errors", NULL,
      (FULL)E_USERDEF},
-    {"E__BASE", "calc errors start above here", NULL, 
+    {"E__BASE", "calc errors start above here", NULL,
      (FULL)E__BASE},
-    {"E__COUNT", "number of calc errors", NULL, 
+    {"E__COUNT", "number of calc errors", NULL,
      (FULL)E__COUNT},
-    {"E__HIGHEST", "highest calc error", NULL, 
+    {"E__HIGHEST", "highest calc error", NULL,
      (FULL)E__HIGHEST},
-    {"FALSE", "boolean false", NULL, 
+    {"FALSE", "boolean false", NULL,
      (FULL)FALSE},
-    {"FILEPOS_BITS", "file position size in bits", NULL, 
+    {"FILEPOS_BITS", "file position size in bits", NULL,
      (FULL)FILEPOS_BITS},
-    {"FULL_BITS", "bits in a FULL", NULL, 
+    {"FULL_BITS", "bits in a FULL", NULL,
      (FULL)FULL_BITS},
-    {"HELPDIR", "location of the help directory", HELPDIR, 
+    {"HELPDIR", "location of the help directory", HELPDIR,
      (FULL)0},
-    {"HIST_BINDING_FILE", "Default binding file", HIST_BINDING_FILE, 
+    {"HIST_BINDING_FILE", "Default binding file", HIST_BINDING_FILE,
      (FULL)0},
-    {"HIST_SIZE", "Default history size", NULL, 
+    {"HIST_SIZE", "Default history size", NULL,
      (FULL)HIST_SIZE},
-    {"INIT_J", "initial 1st walking a55 table index", NULL, 
+    {"INIT_J", "initial 1st walking a55 table index", NULL,
      (FULL)INIT_J},
-    {"INIT_K", "initial 2nd walking a55 table index", NULL, 
+    {"INIT_K", "initial 2nd walking a55 table index", NULL,
      (FULL)INIT_K},
-    {"INODE_BITS", "inode number size in bits", NULL, 
+    {"INODE_BITS", "inode number size in bits", NULL,
      (FULL)INODE_BITS},
-    {"LITTLE_ENDIAN", "Least Significant Byte first symbol", 
+    {"LITTLE_ENDIAN", "Least Significant Byte first symbol",
      NULL, (FULL)LITTLE_ENDIAN},
-    {"LONG_BITS", "bit length of a long", NULL, 
+    {"LONG_BITS", "bit length of a long", NULL,
      (FULL)LONG_BITS},
-    {"MAP_POPCNT", "number of odd primes in pr_map", NULL, 
+    {"MAP_POPCNT", "number of odd primes in pr_map", NULL,
      (FULL)MAP_POPCNT},
-    {"MAX_CALCRC", "maximum allowed length of $CALCRC", NULL, 
+    {"MAX_CALCRC", "maximum allowed length of $CALCRC", NULL,
      (FULL)MAX_CALCRC},
-    {"MAXCMD", "max length of command invocation", NULL, 
+    {"MAXCMD", "max length of command invocation", NULL,
      (FULL)MAXCMD},
-    {"MAXDIM", "max number of dimensions in matrices", NULL, 
+    {"MAXDIM", "max number of dimensions in matrices", NULL,
      (FULL)MAXDIM},
-    {"MAXERROR", "max length of error message string", NULL, 
+    {"MAXERROR", "max length of error message string", NULL,
      (FULL)MAXERROR},
-    {"MAXFILES", "max number of opened files", NULL, 
+    {"MAXFILES", "max number of opened files", NULL,
      (FULL)MAXFILES},
-    {"MAXFULL", "largest SFULL value", NULL, 
+    {"MAXFULL", "largest SFULL value", NULL,
      (FULL)MAXFULL},
-    {"MAXHALF", "largest SHALF value", NULL, 
+    {"MAXHALF", "largest SHALF value", NULL,
      (FULL)MAXHALF},
     {"MAXLABELS", "max number of user labels in function", NULL,
      (FULL)MAXLABELS},
-    {"MAXLEN", "longest storage size allowed", NULL, 
+    {"MAXLEN", "longest storage size allowed", NULL,
      (FULL)MAXLEN},
-    {"MAXLONG", "largest long val", NULL, 
+    {"MAXLONG", "largest long val", NULL,
      (FULL)MAXLONG},
     {"MAXPRINT_DEFAULT", "default number of elements printed", NULL,
      (FULL)MAXPRINT_DEFAULT},
-    {"MAXREDC", "number of entries in REDC cache", NULL, 
+    {"MAXREDC", "number of entries in REDC cache", NULL,
      (FULL)MAXREDC},
     {"MAXSCANCOUNT", "default max scan errors before an abort", NULL,
      (FULL)MAXSCANCOUNT},
-    {"MAXSTACK", "max depth of evaluation stack", NULL, 
+    {"MAXSTACK", "max depth of evaluation stack", NULL,
      (FULL)MAXSTACK},
-    {"MAXSTRING", "max size of string constant", NULL, 
+    {"MAXSTRING", "max size of string constant", NULL,
      (FULL)MAXSTRING},
-    {"MAXUFULL", "largest FULL value", NULL, 
+    {"MAXUFULL", "largest FULL value", NULL,
      (FULL)MAXUFULL},
-    {"MAXULONG", "largest unsigned long val", NULL, 
+    {"MAXULONG", "largest unsigned long val", NULL,
      (FULL)MAXULONG},
-    {"MAX_MAP_PRIME", "larest prime in pr_map", NULL, 
+    {"MAX_MAP_PRIME", "larest prime in pr_map", NULL,
      (FULL)MAX_MAP_PRIME},
-    {"MAX_MAP_VAL", "larest bit in pr_map", NULL, 
+    {"MAX_MAP_VAL", "larest bit in pr_map", NULL,
      (FULL)MAX_MAP_VAL},
     {"MAX_PFACT_VAL", "max x, for which pfact(x) is a long", NULL,
      (FULL)MAX_PFACT_VAL},
-    {"MAX_SM_PRIME", "larest 32 bit prime", NULL, 
+    {"MAX_SM_PRIME", "larest 32 bit prime", NULL,
      (FULL)MAX_SM_PRIME},
-    {"MAX_SM_VAL", "larest 32 bit value", NULL, 
+    {"MAX_SM_VAL", "larest 32 bit value", NULL,
      (FULL)MAX_SM_VAL},
-    {"MUL_ALG2", "default size for alternative multiply", NULL, 
+    {"MUL_ALG2", "default size for alternative multiply", NULL,
      (FULL)MUL_ALG2},
     {"NXT_MAP_PRIME", "smallest odd prime not in pr_map", NULL,
      (FULL)NXT_MAP_PRIME},
     {"NXT_PFACT_VAL", "next prime for higher pfact values", NULL,
      (FULL)NXT_PFACT_VAL},
-    {"OFF_T_BITS", "file offset size in bits", NULL, 
+    {"OFF_T_BITS", "file offset size in bits", NULL,
      (FULL)OFF_T_BITS},
-    {"PIX_32B", "max pix() value", NULL, 
+    {"PIX_32B", "max pix() value", NULL,
      (FULL)PIX_32B},
     {"POW_ALG2", "default size for using REDC for powers", NULL,
      (FULL)POW_ALG2},
     {"REDC_ALG2", "default size using alternative REDC alg", NULL,
      (FULL)REDC_ALG2},
-    {"SBITS", "size of additive or shuffle entry in bits", NULL, 
+    {"SBITS", "size of additive or shuffle entry in bits", NULL,
      (FULL)SBITS},
     {"SBYTES", "size of additive or shuffle entry in bytes", NULL,
      (FULL)SBYTES},
-    {"SCNT", "length of additive 55 table in FULLs", NULL, 
+    {"SCNT", "length of additive 55 table in FULLs", NULL,
      (FULL)SCNT},
-    {"SEEDXORBITS", "low bits of a55 seed devoted to xor", NULL, 
+    {"SEEDXORBITS", "low bits of a55 seed devoted to xor", NULL,
      (FULL)SEEDXORBITS},
-    {"SHALFS", "size of additive or shuffle entry in HALFs", NULL, 
+    {"SHALFS", "size of additive or shuffle entry in HALFs", NULL,
      (FULL)SHALFS},
-    {"SHUFCNT", "size of shuffle table in entries", NULL, 
+    {"SHUFCNT", "size of shuffle table in entries", NULL,
      (FULL)SHUFCNT},
-    {"SHUFLEN", "length of shuffle table in FULLs", NULL, 
+    {"SHUFLEN", "length of shuffle table in FULLs", NULL,
      (FULL)SHUFLEN},
-    {"SHUFMASK", "mask for shuffle table entry selection", NULL, 
+    {"SHUFMASK", "mask for shuffle table entry selection", NULL,
      (FULL)SHUFMASK},
-    {"SHUFPOW", "power of 2 size of the shuffle table", NULL, 
+    {"SHUFPOW", "power of 2 size of the shuffle table", NULL,
      (FULL)SHUFPOW},
-    {"SLEN", "number of FULLs in a shuffle table entry", NULL, 
+    {"SLEN", "number of FULLs in a shuffle table entry", NULL,
      (FULL)SLEN},
-    {"SQ_ALG2", "default size for alternative squaring", NULL, 
+    {"SQ_ALG2", "default size for alternative squaring", NULL,
      (FULL)SQ_ALG2},
-    {"SYMBOLSIZE", "max symbol name size", NULL, 
+    {"SYMBOLSIZE", "max symbol name size", NULL,
      (FULL)SYMBOLSIZE},
-    {"TEN_MAX", "10^(2^TEN_MAX): largest base10 conversion const", NULL, 
+    {"TEN_MAX", "10^(2^TEN_MAX): largest base10 conversion const", NULL,
      (FULL)TEN_MAX},
-    {"TOPFULL", "highest bit in FULL", NULL, 
+    {"TOPFULL", "highest bit in FULL", NULL,
      (FULL)TOPFULL},
-    {"TOPHALF", "highest bit in a HALF", NULL, 
+    {"TOPHALF", "highest bit in a HALF", NULL,
      (FULL)TOPHALF},
-    {"TOPLONG", "top long bit", NULL, 
+    {"TOPLONG", "top long bit", NULL,
      (FULL)TOPLONG},
-    {"TRUE", "boolean true", NULL, 
+    {"TRUE", "boolean true", NULL,
      (FULL)TRUE},
-    {"USUAL_ELEMENTS", "usual number of elements for objects", NULL, 
+    {"USUAL_ELEMENTS", "usual number of elements for objects", NULL,
      (FULL)USUAL_ELEMENTS},
-    {"REGNUM_MAX", "highest custom register number", NULL, 
+    {"REGNUM_MAX", "highest custom register number", NULL,
      (FULL)CUSTOM_REG_MAX},
 
      /* must be last */

custom/sysinfo

@@ -11,7 +11,7 @@ TYPES
 
 DESCRIPTION
 
-    This custom function will return the value certain selected #defile
+    This custom function will return the value certain selected #define
     values.  The infoname arg must be a string that matches the given
     #define name.  For conveience, the case infoname does not matter,
     so "baseb" and "BASEB" refer to the same #define value.
@@ -69,8 +69,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 30.1 $
-## @(#) $Id: sysinfo,v 30.1 2007/03/16 11:10:04 chongo Exp $
+## @(#) $Revision: 30.2 $
+## @(#) $Id: sysinfo,v 30.2 2013/08/17 01:57:37 chongo Exp $
 ## @(#) $Source: /usr/local/src/bin/calc/custom/RCS/sysinfo,v $
 ##
 ## Under source code control:	1997/03/09 23:14:40

decl.h

@@ -1,7 +1,7 @@
 /*
  * decl - variable and function declaration macros
  *
- * Copyright (C) 2007  Landon Curt Noll
+ * Copyright (C) 2007,2014  Landon Curt Noll
  *
  * Primary author:  Landon Curt Noll
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.4 $
- * @(#) $Id: decl.h,v 30.4 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.6 $
+ * @(#) $Id: decl.h,v 30.6 2014/08/24 21:56:51 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/RCS/decl.h,v $
  *
  * Under source code control:	2007/02/09 05:24:25
@@ -33,8 +33,8 @@
 #include "have_const.h"
 
 
-#if !defined(__DECL_H__)
-#define __DECL_H__
+#if !defined(INCLUDE_DECL_H)
+#define INCLUDE_DECL_H
 
 
 /*
@@ -106,4 +106,4 @@
 # define PRINTF_FORMAT(fmt_idx, arg_idx)
 #endif
 
-#endif /* !__DECL_H__ */
+#endif /* !INCLUDE_DECL_H */

file.h

@@ -1,7 +1,7 @@
 /*
  * file - file I/O routines callable by users
  *
- * Copyright (C) 1999-2007  David I. Bell and Landon Curt Noll
+ * Copyright (C) 1999-2007,2014  David I. Bell and Landon Curt Noll
  *
  * Primary author:  David I. Bell
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.2 $
- * @(#) $Id: file.h,v 30.2 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.5 $
+ * @(#) $Id: file.h,v 30.5 2014/08/24 21:56:51 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/RCS/file.h,v $
  *
  * Under source code control:	1996/05/24 05:55:58
@@ -31,8 +31,8 @@
  */
 
 
-#if !defined(__FILE_H__)
-#define __FILE_H__
+#if !defined(INCLUDE_FILE_H)
+#define INCLUDE_FILE_H
 
 
 #if defined(CALC_SRC)	/* if we are building from the calc source tree */
@@ -96,8 +96,8 @@ E_FUNC int fgetposid(FILEID id, FILEPOS *ptr);
 E_FUNC int fsetposid(FILEID id, FILEPOS *ptr);
 E_FUNC int get_open_siz(FILE *fp, ZVALUE *res);
 E_FUNC char* findfname(FILEID);
-E_FUNC FILE *f_pathopen(char *name, char *mode, char *pathlist, 
+E_FUNC FILE *f_pathopen(char *name, char *mode, char *pathlist,
 			char **openpath);
 
 
-#endif /* !__FILE_H__ */
+#endif /* !INCLUDE_FILE_H */

func.c

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.4 $
- * @(#) $Id: func.c,v 30.4 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.11 $
+ * @(#) $Id: func.c,v 30.11 2014/09/30 00:55:11 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/RCS/func.c,v $
  *
  * Under source code control:	1990/02/15 01:48:15
@@ -1241,10 +1241,11 @@ f_primetest(int count, NUMBER **vals)
 {
 	/* parse args */
 	switch (count) {
-	case 1: return itoq((long) qprimetest(vals[0],
-			    qlink(&_qone_), qlink(&_qone_)));
-	case 2: return itoq((long) qprimetest(vals[0],
-			    vals[1], qlink(&_qone_)));
+	case 1: qlink(&_qone_);
+		qlink(&_qone_);
+		return itoq((long) qprimetest(vals[0], &_qone_, &_qone_));
+	case 2: qlink(&_qone_);
+		return itoq((long) qprimetest(vals[0], vals[1], &_qone_));
 	default: return itoq((long) qprimetest(vals[0], vals[1], vals[2]));
 	}
 }
@@ -1675,7 +1676,7 @@ f_hash(int count, VALUE **vals)
 	result.v_type = V_NUM;
 	result.v_subtype = V_NOSUBTYPE;
 
-	hash = FNV1_32_BASIS;
+	hash = QUICKHASH_BASIS;
 	while (count-- > 0)
 		hash = hashvalue(*vals++, hash);
 	result.v_num = utoq((FULL) hash);
@@ -4177,6 +4178,24 @@ f_strcmp(VALUE *v1, VALUE *v2)
 	return result;
 }
 
+S_FUNC VALUE
+f_strcasecmp(VALUE *v1, VALUE *v2)
+{
+	VALUE result;
+	FLAG flag;
+
+	/* initialize VALUE */
+	result.v_subtype = V_NOSUBTYPE;
+
+	if (v1->v_type != V_STR || v2->v_type != V_STR)
+		return error_value(E_STRCASECMP);
+
+	flag = stringcaserel(v1->v_str, v2->v_str);
+
+	result.v_type = V_NUM;
+	result.v_num = itoq((long) flag);
+	return result;
+}
 
 S_FUNC VALUE
 f_strncmp(VALUE *v1, VALUE *v2, VALUE *v3)
@@ -4209,6 +4228,69 @@ f_strncmp(VALUE *v1, VALUE *v2, VALUE *v3)
 	result.v_num = itoq((long) flag);
 	return result;
 }
+S_FUNC VALUE
+f_strncasecmp(VALUE *v1, VALUE *v2, VALUE *v3)
+{
+	long n1, n2, n;
+	FLAG flag;
+	VALUE result;
+
+	/* initialize VALUE */
+	result.v_subtype = V_NOSUBTYPE;
+
+	if (v1->v_type != V_STR || v2->v_type != V_STR ||
+		v3->v_type != V_NUM || qisneg(v3->v_num) ||
+		qisfrac(v3->v_num) || zge31b(v3->v_num->num))
+			return error_value(E_STRNCASECMP);
+	n1 = v1->v_str->s_len;
+	n2 = v2->v_str->s_len;
+	n = qtoi(v3->v_num);
+	if (n < n1)
+		v1->v_str->s_len = n;
+	if (n < n2)
+		v2->v_str->s_len = n;
+
+	flag = stringcaserel(v1->v_str, v2->v_str);
+
+	v1->v_str->s_len = n1;
+	v2->v_str->s_len = n2;
+
+	result.v_type = V_NUM;
+	result.v_num = itoq((long) flag);
+	return result;
+}
+
+S_FUNC VALUE
+f_strtoupper(VALUE *vp)
+{
+        VALUE result;
+
+        /* initialize VALUE */
+        result.v_subtype = V_NOSUBTYPE;
+
+        if (vp->v_type != V_STR)
+                return error_value(E_STRTOUPPER);
+
+        result.v_str  = stringtoupper(vp->v_str);
+        result.v_type = V_STR;
+        return result;
+}
+
+S_FUNC VALUE
+f_strtolower(VALUE *vp)
+{
+        VALUE result;
+
+        /* initialize VALUE */
+        result.v_subtype = V_NOSUBTYPE;
+
+        if (vp->v_type != V_STR)
+                return error_value(E_STRTOLOWER);
+
+        result.v_str  = stringtolower(vp->v_str);
+        result.v_type = V_STR;
+        return result;
+}
 
 
 S_FUNC VALUE
@@ -4396,6 +4478,307 @@ f_ord(VALUE *vp)
 	return result;
 }
 
+S_FUNC VALUE
+f_isupper(VALUE *vp)
+{
+	char c;
+	VALUE result;
+
+	/* initialize VALUE */
+	result.v_subtype = V_NOSUBTYPE;
+
+	switch(vp->v_type) {
+		case V_STR:
+			c = *vp->v_str->s_str;
+			break;
+		case V_OCTET:
+			c = *vp->v_octet;
+			break;
+		default:
+			return error_value(E_ISUPPER);
+	}
+
+	result.v_type = V_NUM;
+	result.v_num = itoq( (isupper( c ))?1l:0l);
+	return result;
+}
+
+S_FUNC VALUE
+f_islower(VALUE *vp)
+{
+	char c;
+	VALUE result;
+
+	/* initialize VALUE */
+	result.v_subtype = V_NOSUBTYPE;
+
+	switch(vp->v_type) {
+		case V_STR:
+			c = *vp->v_str->s_str;
+			break;
+		case V_OCTET:
+			c = *vp->v_octet;
+			break;
+		default:
+			return error_value(E_ISLOWER);
+	}
+
+	result.v_type = V_NUM;
+	result.v_num = itoq( (islower( c ))?1l:0l);
+	return result;
+}
+
+S_FUNC VALUE
+f_isalnum(VALUE *vp)
+{
+	char c;
+	VALUE result;
+
+	/* initialize VALUE */
+	result.v_subtype = V_NOSUBTYPE;
+
+	switch(vp->v_type) {
+		case V_STR:
+			c = *vp->v_str->s_str;
+			break;
+		case V_OCTET:
+			c = *vp->v_octet;
+			break;
+		default:
+			return error_value(E_ISALNUM);
+	}
+
+	result.v_type = V_NUM;
+	result.v_num = itoq( (isalnum( c ))?1l:0l);
+	return result;
+}
+
+S_FUNC VALUE
+f_isalpha(VALUE *vp)
+{
+	char c;
+	VALUE result;
+
+	/* initialize VALUE */
+	result.v_subtype = V_NOSUBTYPE;
+
+	switch(vp->v_type) {
+		case V_STR:
+			c = *vp->v_str->s_str;
+			break;
+		case V_OCTET:
+			c = *vp->v_octet;
+			break;
+		default:
+			return error_value(E_ISALPHA);
+	}
+
+	result.v_type = V_NUM;
+	result.v_num = itoq( (isalpha( c ))?1l:0l);
+	return result;
+}
+
+#if 0
+/* Not in C-standard, marked as obsolete in POSIX.1-2008 */
+S_FUNC VALUE
+f_isascii(VALUE *vp)
+{
+	char c;
+	VALUE result;
+
+	result.v_subtype = V_NOSUBTYPE;
+
+	switch(vp->v_type) {
+		case V_STR:
+			c = *vp->v_str->s_str;
+			break;
+		case V_OCTET:
+			c = *vp->v_octet;
+			break;
+		default:
+			return error_value(E_ISASCII);
+	}
+
+	result.v_type = V_NUM;
+	result.v_num = itoq( (isascii( c ))?1l:0l);
+	return result;
+}
+#endif /* 0 */
+
+S_FUNC VALUE
+f_iscntrl(VALUE *vp)
+{
+	char c;
+	VALUE result;
+
+	/* initialize VALUE */
+	result.v_subtype = V_NOSUBTYPE;
+
+	switch(vp->v_type) {
+		case V_STR:
+			c = *vp->v_str->s_str;
+			break;
+		case V_OCTET:
+			c = *vp->v_octet;
+			break;
+		default:
+			return error_value(E_ISCNTRL);
+	}
+
+	result.v_type = V_NUM;
+	result.v_num = itoq( (iscntrl( c ))?1l:0l);
+	return result;
+}
+
+S_FUNC VALUE
+f_isdigit(VALUE *vp)
+{
+	char c;
+	VALUE result;
+
+	/* initialize VALUE */
+	result.v_subtype = V_NOSUBTYPE;
+
+	switch(vp->v_type) {
+		case V_STR:
+			c = *vp->v_str->s_str;
+			break;
+		case V_OCTET:
+			c = *vp->v_octet;
+			break;
+		default:
+			return error_value(E_ISDIGIT);
+	}
+
+	result.v_type = V_NUM;
+	result.v_num = itoq( (isdigit( c ))?1l:0l);
+	return result;
+}
+
+S_FUNC VALUE
+f_isgraph(VALUE *vp)
+{
+	char c;
+	VALUE result;
+
+	/* initialize VALUE */
+	result.v_subtype = V_NOSUBTYPE;
+
+	switch(vp->v_type) {
+		case V_STR:
+			c = *vp->v_str->s_str;
+			break;
+		case V_OCTET:
+			c = *vp->v_octet;
+			break;
+		default:
+			return error_value(E_ISGRAPH);
+	}
+
+	result.v_type = V_NUM;
+	result.v_num = itoq( (isgraph( c ))?1l:0l);
+	return result;
+}
+
+S_FUNC VALUE
+f_isprint(VALUE *vp)
+{
+	char c;
+	VALUE result;
+
+	/* initialize VALUE */
+	result.v_subtype = V_NOSUBTYPE;
+
+	switch(vp->v_type) {
+		case V_STR:
+			c = *vp->v_str->s_str;
+			break;
+		case V_OCTET:
+			c = *vp->v_octet;
+			break;
+		default:
+			return error_value(E_ISPRINT);
+	}
+
+	result.v_type = V_NUM;
+	result.v_num = itoq( (isprint( c ))?1l:0l);
+	return result;
+}
+
+S_FUNC VALUE
+f_ispunct(VALUE *vp)
+{
+	char c;
+	VALUE result;
+
+	/* initialize VALUE */
+	result.v_subtype = V_NOSUBTYPE;
+
+	switch(vp->v_type) {
+		case V_STR:
+			c = *vp->v_str->s_str;
+			break;
+		case V_OCTET:
+			c = *vp->v_octet;
+			break;
+		default:
+			return error_value(E_ISPUNCT);
+	}
+
+	result.v_type = V_NUM;
+	result.v_num = itoq( (ispunct( c ))?1l:0l);
+	return result;
+}
+
+S_FUNC VALUE
+f_isspace(VALUE *vp)
+{
+	char c;
+	VALUE result;
+
+	/* initialize VALUE */
+	result.v_subtype = V_NOSUBTYPE;
+
+	switch(vp->v_type) {
+		case V_STR:
+			c = *vp->v_str->s_str;
+			break;
+		case V_OCTET:
+			c = *vp->v_octet;
+			break;
+		default:
+			return error_value(E_ISSPACE);
+	}
+
+	result.v_type = V_NUM;
+	result.v_num = itoq( (isspace( c ))?1l:0l);
+	return result;
+}
+
+S_FUNC VALUE
+f_isxdigit(VALUE *vp)
+{
+	char c;
+	VALUE result;
+
+	/* initialize VALUE */
+	result.v_subtype = V_NOSUBTYPE;
+
+	switch(vp->v_type) {
+		case V_STR:
+			c = *vp->v_str->s_str;
+			break;
+		case V_OCTET:
+			c = *vp->v_octet;
+			break;
+		default:
+			return error_value(E_ISXDIGIT);
+	}
+
+	result.v_type = V_NUM;
+	result.v_num = itoq( (isxdigit( c ))?1l:0l);
+	return result;
+}
 
 S_FUNC VALUE
 f_protect(int count, VALUE **vals)
@@ -7866,6 +8249,10 @@ f_blkcpy(int count, VALUE **vals)
 	 */
 	args[0] = vals[1];
 	args[1] = vals[0];
+	null_value.v_type = V_NULL;
+	args[2] = &null_value;
+	args[3] = &null_value;
+	args[4] = &null_value;
 	switch(count) {
 	case 5:
 		args[2] = vals[4];
@@ -7876,14 +8263,10 @@ f_blkcpy(int count, VALUE **vals)
 		count = 5;
 		args[4] = vals[3];
 		args[3] = vals[2];
-		null_value.v_type = V_NULL;
-		args[2] = &null_value;
 		break;
 	case 3:
 		count = 4;
 		args[3] = vals[2];
-		null_value.v_type = V_NULL;
-		args[2] = &null_value;
 		break;
 	}
 
@@ -8459,6 +8842,28 @@ STATIC CONST struct builtin builtins[] = {
 	 "numerator of fraction"},
 	{"ord", 1, 1, 0, OP_NOP, 0, f_ord,
 	 "integer corresponding to character value"},
+	{"isupper", 1, 1, 0, OP_NOP, 0, f_isupper,
+	 "whether character is upper case"},
+	{"islower", 1, 1, 0, OP_NOP, 0, f_islower,
+	 "whether character is lower case"},
+	{"isalnum", 1, 1, 0, OP_NOP, 0, f_isalnum,
+	 "whether character is alpha-numeric"},
+	{"isalpha", 1, 1, 0, OP_NOP, 0, f_isalpha,
+	 "whether character is alphabetic"},
+	{"iscntrl", 1, 1, 0, OP_NOP, 0, f_iscntrl,
+	 "whether character is a control character"},
+	{"isdigit", 1, 1, 0, OP_NOP, 0, f_isdigit,
+	 "whether character is a digit"},
+	{"isgraph", 1, 1, 0, OP_NOP, 0, f_isgraph,
+	 "whether character is a graphical character"},
+	{"isprint", 1, 1, 0, OP_NOP, 0, f_isprint,
+	 "whether character is printable"},
+	{"ispunct", 1, 1, 0, OP_NOP, 0, f_ispunct,
+	 "whether character is a punctuation"},
+	{"isspace", 1, 1, 0, OP_NOP, 0, f_isspace,
+	 "whether character is a space character"},
+	{"isxdigit", 1, 1, 0, OP_NOP, 0, f_isxdigit,
+	 "whether character is a hexadecimal digit"},
 	{"param", 1, 1, 0, OP_ARGVALUE, 0, 0,
 	 "value of parameter n (or parameter count if n\n"
 	 "\t\t\tis zero)"},
@@ -8598,10 +9003,16 @@ STATIC CONST struct builtin builtins[] = {
 	 "assign value to stoponerror flag"},
 	{"str", 1, 1, 0, OP_NOP, 0, f_str,
 	 "simple value converted to string"},
+        {"strtoupper", 1, 1, 0, OP_NOP, 0, f_strtoupper,
+         "Make string upper case"},
+        {"strtolower", 1, 1, 0, OP_NOP, 0, f_strtolower,
+         "Make string lower case"},
 	{"strcat", 1,IN, 0, OP_NOP, 0, f_strcat,
 	 "concatenate strings together"},
 	{"strcmp", 2, 2, 0, OP_NOP, 0, f_strcmp,
 	 "compare two strings"},
+	{"strcasecmp", 2, 2, 0, OP_NOP, 0, f_strcasecmp,
+	 "compare two strings case independent"},
 	{"strcpy", 2, 2, 0, OP_NOP, 0, f_strcpy,
 	 "copy string to string"},
 	{"strerror", 0, 1, 0, OP_NOP, 0, f_strerror,
@@ -8610,6 +9021,8 @@ STATIC CONST struct builtin builtins[] = {
 	 "length of string"},
 	{"strncmp", 3, 3, 0, OP_NOP, 0, f_strncmp,
 	 "compare strings a, b to c characters"},
+	{"strncasecmp", 3, 3, 0, OP_NOP, 0, f_strncasecmp,
+	 "compare strings a, b to c characters case independent"},
 	{"strncpy", 3, 3, 0, OP_NOP, 0, f_strncpy,
 	 "copy up to c characters from string to string"},
 	{"strpos", 2, 2, 0, OP_NOP, 0, f_strpos,

func.h

@@ -1,7 +1,7 @@
 /*
  * func - built-in function interface definitions
  *
- * Copyright (C) 1999-2007  David I. Bell
+ * Copyright (C) 1999-2007,2014  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: func.h,v 30.1 2007/03/16 11:09:46 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: func.h,v 30.3 2014/08/24 21:56:51 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/RCS/func.h,v $
  *
  * Under source code control:	1990/02/15 01:48:33
@@ -28,8 +28,8 @@
  */
 
 
-#if !defined(__FUNC_H__)
-#define __FUNC_H__
+#if !defined(INCLUDE_FUNC_H)
+#define INCLUDE_FUNC_H
 
 
 #if defined(CALC_SRC)	/* if we are building from the calc source tree */
@@ -110,4 +110,4 @@ E_FUNC void freenumbers(FUNC *);
 E_FUNC void freefunc(FUNC *);
 
 
-#endif /* !__FUNC_H__ */
+#endif /* !INCLUDE_FUNC_H */

hash.h

@@ -1,7 +1,7 @@
 /*
  * hash - one-way hash routines
  *
- * Copyright (C) 1999-2007  Landon Curt Noll
+ * Copyright (C) 1999-2007,2014  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.2 $
- * @(#) $Id: hash.h,v 30.2 2007/07/05 17:37:41 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: hash.h,v 30.4 2014/08/24 21:56:51 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/RCS/hash.h,v $
  *
  * Under source code control:	1995/11/14 23:57:45
@@ -29,8 +29,8 @@
  */
 
 
-#if !defined(__HASH_H__)
-#define __HASH_H__
+#if !defined(INCLUDE_HASH_H)
+#define INCLUDE_HASH_H
 
 
 #if defined(CALC_SRC)	/* if we are building from the calc source tree */
@@ -132,4 +132,4 @@ E_FUNC HASH* hash_usb8(int, USB8*, int, HASH*);
 E_FUNC HASH* hash_value(int, void*, HASH*);
 
 
-#endif /* !__HASH_H__ */
+#endif /* !INCLUDE_HASH_H */

have_stdvs.c

@@ -1,7 +1,7 @@
 /*
  * have_stdvs - try <stdarg.h> to see if it really works with vsprintf()
  *
- * Copyright (C) 1999  Landon Curt Noll
+ * Copyright (C) 1999,2014  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.2 $
- * @(#) $Id: have_stdvs.c,v 30.2 2013/08/11 08:41:38 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: have_stdvs.c,v 30.4 2014/08/24 21:57:31 chongo Exp $
  * @(#) $Source: /usr/local/src/bin/calc/RCS/have_stdvs.c,v $
  *
  * Under source code control:	1995/09/09 22:41:10
@@ -56,6 +56,11 @@
 # include <string.h>
 #endif
 
+#include "have_stdlib.h"
+#ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+
 #undef VSPRINTF_SIZE_T
 #if defined(FORCE_STDC) || (defined(__STDC__) && __STDC__ != 0) || \
     defined(__cplusplus)
@@ -87,7 +92,7 @@ try_nthis(char *fmt, VSPRINTF_SIZE_T size, ...)
 {
 	va_list ap;
 
-	va_start(ap, fmt);
+	va_start(ap, size);
 #if !defined(DONT_HAVE_VSPRINTF)
 	vsnprintf(buf, size, fmt, ap);
 #else

help.c

@@ -1,7 +1,7 @@
 /*
  * help - display help for calc
  *
- * Copyright (C) 1999-2007  Landon Curt Noll
+ * Copyright (C) 1999-2007,2014  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,9 +17,9 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: help.c,v 30.3 2013/08/11 01:08:32 chongo Exp $
- * @(#) $Source: /usr/local/src/cmd/calc/RCS/help.c,v $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: help.c,v 30.4 2014/08/24 21:57:31 chongo Exp $
+ * @(#) $Source: /usr/local/src/bin/calc/RCS/help.c,v $
  *
  * Under source code control:	1997/09/14 10:58:30
  * File existed as early as:	1997

help/Makefile

@@ -18,9 +18,9 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.5 $
-# @(#) $Id: Makefile,v 30.5 2007/09/21 01:27:27 chongo Exp $
-# @(#) $Source: /usr/local/src/cmd/calc/help/RCS/Makefile,v $
+# @(#) $Revision: 30.10 $
+# @(#) $Id: Makefile,v 30.10 2014/09/02 07:15:58 chongo Exp $
+# @(#) $Source: /usr/local/src/bin/calc/help/RCS/Makefile,v $
 #
 # Under source code control:	1991/07/23 06:47:57
 # File existed as early as:	1991
@@ -272,43 +272,47 @@ BLT_HELP_FILES= ${BLT_HELP_FILES_3} ${BLT_HELP_FILES_5} \
 		${BLT_HELP_FILES_11} ${BLT_HELP_FILES_13} \
 		${BLT_HELP_FILES_14}
 
+# The detailed list of help files to install
+#
 # This list is prodiced by the detaillist rule when no WARNINGS are detected.
 #
 # Please use:
 #
-#	make detaillist
+#	make detail_help_list
 #
 # to keep this list in nice sorted order and to check that these
 # non-special help files are under RCS control.
 #
-DETAIL_HELP= abs access acos acosh acot acoth acsc acsch address agd append \
-	appr arg argv arrow asec asech asin asinh assign atan atan2 atanh \
-	avg base base2 bernoulli bit blk blkcpy blkfree blocks bround btrunc \
-	calc_tty calclevel calcpath catalan ceil cfappr cfsim char cmdbuf \
-	cmp comb conj cos cosh cot coth count cp csc csch ctime delete den \
-	dereference det digit digits display dp epsilon errcount errmax \
-	errno error estr euler eval exp fact factor fclose fcnt feof ferror \
-	fflush fgetc fgetfield fgetfile fgetline fgets fgetstr fib files \
-	floor fopen forall fpathopen fprintf fputc fputs fputstr frac free \
-	freebernoulli freeeuler freeglobals freeredc freestatics frem freopen \
-	fscan fscanf fseek fsize ftell gcd gcdrem gd getenv hash head highbit \
-	hmean hnrmod hypot ilog ilog10 ilog2 im indices inputlevel insert int \
-	inverse iroot isassoc isatty isblk isconfig isdefined iserror iseven \
-	isfile ishash isident isint islist ismat ismult isnull isnum isobj \
-	isobjtype isodd isprime isptr isqrt isrand israndom isreal isrel \
-	issimple issq isstr istype jacobi join lcm lcmfact lfactor ln log \
-	lowbit ltol makelist matdim matfill matmax matmin matsum mattrace \
-	mattrans max memsize meq min minv mmin mne mod modify name near \
-	newerror nextcand nextprime norm null num oldvalue ord param perm \
-	pfact pi pix places pmod polar poly pop popcnt pound power prevcand \
-	prevprime printf prompt protect ptest push putenv quo quomod rand \
-	randbit random randombit randperm rcin rcmul rcout rcpow rcsq re \
-	remove reverse rewind rm root round rsearch runtime saveval scale \
-	scan scanf search sec sech seed segment select sgn sha1 sin \
-	sinh size sizeof sleep sort sqrt srand srandom ssq stoponerror \
-	str strcat strcmp strcpy strerror strlen strncmp strncpy strpos \
-	strprintf strscan strscanf substr sum swap system systime tail tan \
-	tanh test time trunc usertime version xor
+DETAIL_HELP= abs access acos acosh acot acoth acsc acsch address \
+	agd append appr arg argv arrow asec asech asin asinh assign atan \
+	atan2 atanh avg base base2 bernoulli bit blk blkcpy blkfree blocks \
+	bround btrunc calc_tty calclevel calcpath catalan ceil cfappr cfsim \
+	char cmdbuf cmp comb conj cos cosh cot coth count cp csc csch ctime \
+	delete den dereference det digit digits display dp epsilon errcount \
+	errmax errno error estr euler eval exp fact factor fclose fcnt \
+	feof ferror fflush fgetc fgetfield fgetfile fgetline fgets fgetstr \
+	fib files floor fopen forall fpathopen fprintf fputc fputs fputstr \
+	frac free freebernoulli freeeuler freeglobals freeredc freestatics \
+	frem freopen fscan fscanf fseek fsize ftell gcd gcdrem gd getenv \
+	hash head highbit hmean hnrmod hypot ilog ilog10 ilog2 im indices \
+	inputlevel insert int inverse iroot isalnum isalpha isassoc isatty \
+	isblk iscntrl isconfig isdefined isdigit iserror iseven isfile \
+	isgraph ishash isident isint islist islower ismat ismult isnull \
+	isnum isobj isobjtype isodd isprime isprint isptr ispunct isqrt \
+	isrand israndom isreal isrel issimple isspace issq isstr istype \
+	isupper isxdigit jacobi join lcm lcmfact lfactor ln log lowbit ltol \
+	makelist matdim matfill matmax matmin matsum mattrace mattrans max \
+	memsize meq min minv mmin mne mod modify name near newerror nextcand \
+	nextprime norm null num oldvalue ord param perm pfact pi pix places \
+	pmod polar poly pop popcnt pound power prevcand prevprime printf \
+	prompt protect ptest push putenv quo quomod rand randbit random \
+	randombit randperm rcin rcmul rcout rcpow rcsq re remove reverse \
+	rewind rm root round rsearch runtime saveval scale scan scanf \
+	search sec sech seed segment select sgn sha1 sin sinh size sizeof \
+	sleep sort sqrt srand srandom ssq stoponerror str strcasecmp strcat \
+	strcmp strcpy strerror strlen strncasecmp strncmp strncpy strpos \
+	strprintf strscan strscanf strtolower strtoupper substr sum swap \
+	system systime tail tan tanh test time trunc usertime version xor
 
 # This list is of files that are clones of DETAIL_HELP files.  They are
 # built from DETAIL_HELP files.
@@ -633,11 +637,26 @@ bsdi: all
 	${RM} -f obj
 	${CP} obj.file obj
 
-# These next rule help me form the ${DETAIL_HELP} makefile variables above.
+# These next rule help form the ${DETAIL_HELP} makefile variables above.
 #
-detaillist:
-	${Q} -(echo "xxxxx"; \
-	   for i in ${DETAIL_HELP} /dev/null; do \
+# NOTE: The ${DETAIL_HELP} list does not include special help files.
+#
+detail_help_list:
+	${Q} -(find .  -mindepth 1 -maxdepth 1 -type f \
+	         ! -name Makefile ! -name '.Makefile.swp' \
+		 ! -name archive ! -name assoc ! -name builtin.end \
+		 ! -name builtin.top ! -name command ! -name config \
+		 ! -name contrib ! -name credit ! -name custom ! -name define \
+		 ! -name environment ! -name errorcodes.hdr \
+		 ! -name errorcodes.sed ! -name expression ! -name file \
+		 ! -name funclist.c ! -name funclist.sed ! -name help \
+		 ! -name history ! -name interrupt ! -name intro ! -name list \
+		 ! -name mat ! -name obj.file ! -name operator \
+		 ! -name overview ! -name script ! -name statement \
+		 ! -name todo ! -name types ! -name unexpected \
+		 ! -name variable ! -name wishlist \
+		 -print | \
+	   while read i; do \
 		if [ X"$$i" != X"/dev/null" ]; then \
 		    if [ ! -f RCS/$$i,v ]; then \
 			echo "WARNING: $$i not under RCS control" 1>&2; \
@@ -645,8 +664,10 @@ detaillist:
 			echo $$i; \
 		    fi; \
 		fi; \
-	done | LANG=C ${SORT}) | ${FMT} -70 | \
-	    ${SED} -e '1s/xxxxx/DETAIL_HELP=/' -e '2,$$s/^/	/' \
+	done; \
+	echo '--first_line--') | \
+	    ${SED} -e 's:^\./::' | LANG=C ${SORT} | ${FMT} -70 | \
+	    ${SED} -e '1s/--first_line--/DETAIL_HELP=/' -e '2,$$s/^/	/' \
 		   -e 's/$$/ \\/' -e '$$s/ \\$$//'
 
 ##
@@ -684,8 +705,8 @@ clobber: clean
 #
 install: all
 	-${Q} if [ ! -d ${T}${CALC_SHAREDIR} ]; then \
-	    echo ${MKDIR} ${T}${CALC_SHAREDIR}; \
-	    ${MKDIR} ${T}${CALC_SHAREDIR}; \
+	    echo ${MKDIR} -p ${T}${CALC_SHAREDIR}; \
+	    ${MKDIR} -p ${T}${CALC_SHAREDIR}; \
 	    if [ ! -d "${T}${CALC_SHAREDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${CALC_SHAREDIR}"; \
 		${MKDIR} -p "${T}${CALC_SHAREDIR}"; \
@@ -696,8 +717,8 @@ install: all
 	    ${TRUE}; \
 	fi
 	-${Q} if [ ! -d ${T}${HELPDIR} ]; then \
-	    echo ${MKDIR} ${T}${HELPDIR}; \
-	    ${MKDIR} ${T}${HELPDIR}; \
+	    echo ${MKDIR} -p ${T}${HELPDIR}; \
+	    ${MKDIR} -p ${T}${HELPDIR}; \
 	    if [ ! -d "${T}${HELPDIR}" ]; then \
 		echo ${MKDIR} -p "${T}${HELPDIR}"; \
 		${MKDIR} -p "${T}${HELPDIR}"; \

help/abs

@@ -62,7 +62,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: abs,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/abs,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/abs,v $
 ##
 ## Under source code control:	1994/03/19 01:40:22
 ## File existed as early as:	1994

help/access

@@ -66,7 +66,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: access,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/access,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/access,v $
 ##
 ## Under source code control:	1996/04/30 03:36:20
 ## File existed as early as:	1996

help/acos

@@ -47,7 +47,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: acos,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/acos,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/acos,v $
 ##
 ## Under source code control:	1994/03/19 01:40:23
 ## File existed as early as:	1994

help/acosh

@@ -50,7 +50,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: acosh,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/acosh,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/acosh,v $
 ##
 ## Under source code control:	1994/03/19 01:40:24
 ## File existed as early as:	1994

help/acot

@@ -47,7 +47,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: acot,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/acot,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/acot,v $
 ##
 ## Under source code control:	1995/11/13 03:49:00
 ## File existed as early as:	1995

help/acoth

@@ -49,7 +49,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: acoth,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/acoth,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/acoth,v $
 ##
 ## Under source code control:	1995/11/13 03:49:01
 ## File existed as early as:	1995

help/acsc

@@ -47,7 +47,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: acsc,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/acsc,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/acsc,v $
 ##
 ## Under source code control:	1995/11/13 03:49:00
 ## File existed as early as:	1995

help/acsch

@@ -50,7 +50,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: acsch,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/acsch,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/acsch,v $
 ##
 ## Under source code control:	1995/11/13 03:49:01
 ## File existed as early as:	1995

help/address

@@ -178,7 +178,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: address,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/address,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/address,v $
 ##
 ## Under source code control:	1997/09/06 20:03:34
 ## File existed as early as:	1997

help/agd

@@ -74,7 +74,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: agd,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/agd,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/agd,v $
 ##
 ## Under source code control:	1997/09/06 20:03:34
 ## File existed as early as:	1997

help/append

@@ -78,7 +78,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: append,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/append,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/append,v $
 ##
 ## Under source code control:	1994/03/19 03:13:17
 ## File existed as early as:	1994

help/appr

@@ -169,7 +169,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: appr,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/appr,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/appr,v $
 ##
 ## Under source code control:	1994/09/25 17:18:21
 ## File existed as early as:	1994

help/archive

@@ -33,7 +33,7 @@ chongo <was here> /\../\
 ##
 ## @(#) $Revision: 30.2 $
 ## @(#) $Id: archive,v 30.2 2013/08/11 01:08:32 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/archive,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/archive,v $
 ##
 ## Under source code control:	1996/06/13 02:51:48
 ## File existed as early as:	1996

help/arg

@@ -50,7 +50,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: arg,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/arg,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/arg,v $
 ##
 ## Under source code control:	1994/09/25 20:22:31
 ## File existed as early as:	1994

help/argv

@@ -71,7 +71,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: argv,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/argv,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/argv,v $
 ##
 ## Under source code control:	1999/11/23 19:45:05
 ## File existed as early as:	1999

help/arrow

@@ -68,7 +68,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: arrow,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/arrow,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/arrow,v $
 ##
 ## Under source code control:	1997/09/06 20:03:34
 ## File existed as early as:	1997

help/asec

@@ -47,7 +47,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: asec,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/asec,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/asec,v $
 ##
 ## Under source code control:	1995/11/13 03:49:00
 ## File existed as early as:	1995

help/asech

@@ -49,7 +49,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: asech,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/asech,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/asech,v $
 ##
 ## Under source code control:	1995/11/13 03:49:00
 ## File existed as early as:	1995

help/asin

@@ -47,7 +47,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: asin,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/asin,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/asin,v $
 ##
 ## Under source code control:	1994/03/19 01:40:24
 ## File existed as early as:	1994

help/asinh

@@ -49,7 +49,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: asinh,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/asinh,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/asinh,v $
 ##
 ## Under source code control:	1994/03/19 01:40:25
 ## File existed as early as:	1994

help/assign

@@ -135,7 +135,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: assign,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/assign,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/assign,v $
 ##
 ## Under source code control:	1995/05/11 21:03:23
 ## File existed as early as:	1995

help/assoc

@@ -100,7 +100,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: assoc,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/assoc,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/assoc,v $
 ##
 ## Under source code control:	1994/09/25 20:22:31
 ## File existed as early as:	1994

help/atan

@@ -47,7 +47,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: atan,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/atan,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/atan,v $
 ##
 ## Under source code control:	1994/03/19 01:40:25
 ## File existed as early as:	1994

help/atan2

@@ -54,7 +54,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: atan2,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/atan2,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/atan2,v $
 ##
 ## Under source code control:	1994/03/19 01:40:26
 ## File existed as early as:	1994

help/atanh

@@ -49,7 +49,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: atanh,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/atanh,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/atanh,v $
 ##
 ## Under source code control:	1994/03/19 01:40:27
 ## File existed as early as:	1994

help/avg

@@ -67,7 +67,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: avg,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/avg,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/avg,v $
 ##
 ## Under source code control:	1994/09/25 20:22:31
 ## File existed as early as:	1994

help/base

@@ -99,7 +99,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: base,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/base,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/base,v $
 ##
 ## Under source code control:	1994/09/30 00:09:39
 ## File existed as early as:	1994

help/base2

@@ -111,7 +111,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: base2,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/base2,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/base2,v $
 ##
 ## Under source code control:	2002/12/29 00:21:07
 ## File existed as early as:	2002

help/bernoulli

@@ -59,7 +59,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: bernoulli,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/bernoulli,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/bernoulli,v $
 ##
 ## Under source code control:	2000/07/13 01:33:00
 ## File existed as early as:	2000

help/bit

@@ -60,7 +60,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: bit,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/bit,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/bit,v $
 ##
 ## Under source code control:	1994/10/21 02:21:30
 ## File existed as early as:	1994

help/blk

@@ -251,7 +251,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: blk,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/blk,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/blk,v $
 ##
 ## Under source code control:	1997/04/05 13:07:13
 ## File existed as early as:	1997

help/blkcpy

@@ -208,7 +208,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.2 $
 ## @(#) $Id: blkcpy,v 30.2 2013/08/11 01:08:32 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/blkcpy,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/blkcpy,v $
 ##
 ## Under source code control:	1997/04/05 14:08:50
 ## File existed as early as:	1997

help/blkfree

@@ -75,7 +75,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: blkfree,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/blkfree,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/blkfree,v $
 ##
 ## Under source code control:	1997/04/05 13:07:13
 ## File existed as early as:	1997

help/blocks

@@ -60,7 +60,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: blocks,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/blocks,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/blocks,v $
 ##
 ## Under source code control:	1997/04/05 13:07:13
 ## File existed as early as:	1997

help/bround

@@ -140,7 +140,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: bround,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/bround,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/bround,v $
 ##
 ## Under source code control:	1994/09/30 00:22:35
 ## File existed as early as:	1994

help/btrunc

@@ -61,7 +61,7 @@ SEE ALSO
 ##
 ## @(#) $Revision: 30.1 $
 ## @(#) $Id: btrunc,v 30.1 2007/03/16 11:10:42 chongo Exp $
-## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/btrunc,v $
+## @(#) $Source: /usr/local/src/bin/calc/help/RCS/btrunc,v $
 ##
 ## Under source code control:	1994/09/30 00:44:27
 ## File existed as early as:	1994