Release calc version 2.12.3.0

CHANGES

@@ -1,4 +1,129 @@
-The following are the changes from calc version 2.12.1.10 to date:
+The following are the changes from calc version 2.12.3.0 to date:
+
+    Fixed the Jacobi function where it returned 1 when it should have
+    returned 0.  Thanks goes to Kevin Sopp (baraclese at googlemail dot com)
+    for discovering the problem and suggesting the nature if the fix.
+
+    Calc versions will always be of the form x.y.z.w even when the
+    MINOR_PATCH (w) is 0.  Thus, 2.12.3.0 will be printed as 2.12.3.0
+    instread of just 2.12.3.
+
+
+The following are the changes from calc version 2.12.2.3 to 2.12.2.4:
+
+    Added OpenBSD target.
+
+    Using the -r test instead of the -e test in Makefiles because some
+    out of date shells still do not have the -e test.
+
+    The Makefile now avoids the use of if ! command because some out of
+    date shells to not support the ! construct.
+
+
+The following are the changes from calc version 2.12.1.1 to 2.12.2.2:
+
+    Added an explicit Solaris target.
+
+    Fixed confusion in Makefile where some uses of ${EXT} were misnamed ${EXE}.
+
+    Added a "make strip" rule, per suggestion from Igor Furlan <primorec
+    at sbcglobal dot net>, to allow one to strip previously built binary
+    executables and libraries.
+
+    Under the Darwin / OS X target, ${DARWIN_ARCH} is left empty meaning
+    that calc is compiled for the native CPU type instead of Universal
+    Binary (Intel and PPC).
+
+    By default, the calc binary that is built for the rpm forces
+    ${LD_SHARE} to be empty.  An empty ${LD_SHARE} means that the calc
+    from the rpm does not set rpath.  This in turn causes the default
+    system path to be searched when looking for libcalc and libcustcalc.
+
+    The Makefile shipped with calc still sets ${LD_SHARE} for host targets.
+    By default, the dynamic shared library search path for all targets
+    starts with the source directory.  Starting the search in the source
+    directory is convenient for testing and debugging but is not appropriate
+    for installation on a production system.  To get the same effect
+    as the calc binary in the calc rpm, try:
+
+	make clobber
+	make calc-dynamic-only BLD_TYPE=calc-dynamic-only LD_SHARE=
+	make install
+
+    The libcalc and libcustcalc shared libraries are now tied to
+    the 4 level calc version instead of just 3 levels.  For example,
+    under Linux calc version 2.12.2.1 uses /usr/lib/libcalc.so.2.12.2.1
+    instead of just the /usr/lib/libcalc.so.2.12.2 file.  This change
+    was made so that calc produced by 'make clobber; make all install'
+    is consistent with the calc rpm.
+
+    Calc is now releasing the calc-debuginfo rpm for those RPM users who
+    which to use non-stripped libraries and binaries for debugging
+    purposes.  By default, the calc rpm installed stripped binaries
+    and libraries.
+
+    Added this high priority item to the calc help/todo list:
+
+	It is overkill to have nearly everything wind up in libcalc.
+	Form a libcalcmath and a libcalclang so that an application
+	that just wants to link with the calc math libs can use them
+	without dragging in all of the other calc language, I/O,
+	and builtin functions.
+
+    Fixed the wording for the -i flag in the calc man page.
+
+    Added some notes to the help/unexpected file regarding calc
+    and interactice shells.
+
+    Fixed bug where a FILEPOS was copied FPOS_POS_BITS octets instead of
+    FPOS_POS_LEN octets.
+
+    Split out ${READLINE_EXTRAS} Makefile variables from ${READLINE_LIB}
+    to better deal with Fedora rpm requirements.
+
+    Bit 8 (0x80) of calc_debug is reserved for custom debugging.
+    See help/config and custom/HOW_TO_ADD for details.
+
+    When the Makefile variable ${ALLOW_CUSTOM} is not defined or empty,
+    the libcustcalc library is not built or linked against, certain make
+    rules skip going into the custom sub-directory, the install
+    rule skips certain custom installation actions, and the common
+    C flags (${COMMON_CFLAGS}) is given -UCUSTOM.  Other make rules such
+    as "make clean" and "make clobber" still work as before.  Also
+    the Makefile.simple assumes that the Makefile variable ${ALLOW_CUSTOM}
+    is -DCUSTOM.
+
+    Clarified that the calc builtin functions rand() and random()
+    operate over a half closed interval.  The help/rand and help/random
+    refer to  the top of the interval as "beyond" instead of "max".
+
+    Releaseing source tar balls using bzip2 instead of with gzip.  So
+    what was calc-something.tar.gz is now calc-something.tar.bz2.
+    To "uncompress" use:
+
+    	bunzip2 calc-something.tar.bz2
+
+    On some systems, one may untar directly by:
+
+	tar -jxvf calc-something.tar.bz2
+
+   The Makefile variable ${BYTE_ORDER} was replaced by ${CALC_BYTE_ORDER}.
+
+   Changed the way the Makefile can force the calc byte order.  If you set
+   the Makefile variable ${CALC_BYTE_ORDER} to be -DCALC_BIG_ENDIAN then
+   endian.h will force the CPP symbol CALC_BYTE_ORDER to be BIG_ENDIAN.
+   If you set ${CALC_BYTE_ORDER} to be -DCALC_LITTLE_ENDIAN then endian.h
+   will force the CPP symbol CALC_BYTE_ORDER to be LITTLE_ENDIAN.
+   If the Makefile variable ${CALC_BYTE_ORDER} is empty, then the CPP
+   symbol CALC_BYTE_ORDER will set to the CPP symbol BYTE_ORDER as
+   defined by some system include file (if the Makefile can find such
+   an include file), or the Makefile compiling endian.c and hopefully
+   using that result to set CPP symbol CALC_BYTE_ORDER.  Regardless of
+   how it happens, the CPP symbol CALC_BYTE_ORDER should end up set in
+   endian_calc.h include file.
+
+
+The following are the changes from calc version 2.12.1.10 to 2.12.2:
 
     Put back the missing -s flags on the cscripts:  mersenne, 4dsphere,
     fprodcut, plus, and powerterm.  Thanks goes to Bradley Reed
@@ -6592,8 +6717,8 @@ Following is a list of visible changes to calc from version 1.24.7 to 1.26.1:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 30.8 $
-## @(#) $Id: CHANGES,v 30.8 2007/09/02 06:26:38 chongo Exp $
+## @(#) $Revision: 30.13 $
+## @(#) $Id: CHANGES,v 30.13 2008/02/24 07:58:36 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/CHANGES,v $
 ##
 ## Under source code control:	1993/06/02 18:12:57

HOWTO.INSTALL

@@ -1,4 +1,4 @@
-Installing calc from the gziped tarball in 4 easy steps:
+Installing calc from the bzip2-ed tarball in 4 easy steps:
 
     0)  If your platform supports i686 RPMs, you may want to go to:
 
@@ -17,13 +17,13 @@ Installing calc from the gziped tarball in 4 easy steps:
 
 	The following 4 steps apply to calc source tree that comes from either:
 
-		gunzip -c calc-*.tar.gz | tar -xvf -
+		bunzip2 -c calc-*.tar.bz2 | tar -xvf -
 
 	or from:
 
 		rpm -ivh calc-*.src.rpm
 		cd /var/tmp
-		gunzip -c /usr/src/redhat/SOURCES/calc-*.tar.gz | tar -xvf -
+		bunzip2 -c /usr/src/redhat/SOURCES/calc-*.tar.bz2 | tar -xvf -
 
     1)	Look at the makefile, and adjust it to suit your needs.
 
@@ -204,8 +204,8 @@ the calc help subsystem.  See the README file for details.
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 30.5 $
-## @(#) $Id: HOWTO.INSTALL,v 30.5 2007/09/01 19:54:03 chongo Exp $
+## @(#) $Revision: 30.6 $
+## @(#) $Id: HOWTO.INSTALL,v 30.6 2007/10/16 12:22:22 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/HOWTO.INSTALL,v $
 ##
 ## Under source code control:	1999/09/27 20:48:44

Makefile

@@ -11,7 +11,7 @@
 # (Generic calc makefile)
 #
 #  NOTE: This is NOT the calc rpm Makefile.  This Makefile is a generic
-#	 Makefile for the people who build calc from the gziped tarball.
+#	 Makefile for the people who build calc from the bzip2-ed tarball.
 #	 Without modification, it not assume the system has readline, ncurses
 #	 or less.  It compiles with gcc -O3 -g3 as well.  You can change all
 #	 this by modifying the Makefile variables below.
@@ -20,7 +20,8 @@
 #	 has the GNU readline headers and libaraies:
 #
 #	 USE_READLINE= -DUSE_READLINE
-#	 READLINE_LIB= -lreadline -lhistory -lncurses
+#	 READLINE_LIB= -lreadline
+#	 READLINE_EXTRAS= -lhistory -lncurses
 #
 # Copyright (C) 1999-2007  Landon Curt Noll
 #
@@ -38,8 +39,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-MAKEFILE_REV= $$Revision: 30.18 $$
-# @(#) $Id: Makefile.ship,v 30.18 2007/09/02 05:38:34 chongo Exp $
+MAKEFILE_REV= $$Revision: 30.27 $$
+# @(#) $Id: Makefile.ship,v 30.27 2008/02/24 07:58:36 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/Makefile.ship,v $
 #
 # Under source code control:	1990/02/15 01:48:41
@@ -120,19 +121,19 @@ HAVE_VSPRINTF=
 #    Big Endian:	Amdahl, 68k, Pyramid, Mips, Sparc, ...
 #    Little Endian:	Vax, 32k, Spim (Dec Mips), i386, i486, ...
 #
-# If in doubt, leave BYTE_ORDER empty.	This Makefile will attempt to
+# If in doubt, leave CALC_BYTE_ORDER empty.  This Makefile will attempt to
 # use BYTE_ORDER in <machine/endian.h> or it will attempt to run
 # the endian program.  If you get syntax errors when you compile,
 # try forcing the value to be -DBIG_ENDIAN and run the calc regression
 # tests. (see the README file)	If the calc regression tests fail, do
-# a make clobber and try -DLITTLE_ENDIAN.   If that fails, ask a wizard
+# a make clobber and try -DCALC_LITTLE_ENDIAN.   If that fails, ask a wizard
 # for help.
 #
-# Select BYTE_ORDER= -DLITTLE_ENDIAN for DJGPP.
+# Select CALC_BYTE_ORDER= -DCALC_LITTLE_ENDIAN for DJGPP.
 #
-BYTE_ORDER=
-#BYTE_ORDER= -DBIG_ENDIAN
-#BYTE_ORDER= -DLITTLE_ENDIAN
+CALC_BYTE_ORDER=
+#CALC_BYTE_ORDER= -DCALC_BIG_ENDIAN
+#CALC_BYTE_ORDER= -DCALC_LITTLE_ENDIAN
 
 # Determine the number of bits in a long
 #
@@ -767,13 +768,33 @@ MANMAKE= /usr/local/bin/manmake
 MANMODE= 0444
 CATMODE= 0444
 
+# By default, custom builtin functions may only be executed if calc
+# is given the -C option.  This is because custom builtin functions
+# may invoke non-standard or non-portable code.	 One may completely
+# disable custom builtin functions by not compiling any of code
+#
+# ALLOW_CUSTOM= -DCUSTOM	# allow custom only if -C is given
+# ALLOW_CUSTOM=			# disable custom even if -C is given
+#
+# If in doubt, use ALLOW_CUSTOM= -DCUSTOM
+#
+ALLOW_CUSTOM= -DCUSTOM
+#ALLOW_CUSTOM=
+
 # If the $CALCPATH environment variable is not defined, then the following
 # path will be search for calc resource file routines.
 #
 # Select CALCPATH= .;./cal;~/.cal;${CALC_SHAREDIR};${CUSTOMCALDIR} for DJGPP.
 #
+#if 0	/* start of skip for non-Gnu makefiles */
+ifdef ALLOW_CUSTOM
+#endif	/* end of skip for non-Gnu makefiles */
 CALCPATH= .:./cal:~/.cal:${CALC_SHAREDIR}:${CUSTOMCALDIR}
-#CALCPATH= .;./cal;~/.cal;${CALC_SHAREDIR};${CUSTOMCALDIR}
+#if 0	/* start of skip for non-Gnu makefiles */
+else
+CALCPATH= .:./cal:~/.cal:${CALC_SHAREDIR}
+endif
+#endif	/* end of skip for non-Gnu makefiles */
 
 # If the $CALCRC environment variable is not defined, then the following
 # path will be search for calc resource files.
@@ -793,6 +814,8 @@ CALCRC= ${CALC_SHAREDIR}/startup:~/.calcrc:./.calcinit
 #
 #	READLINE_LIB		The flags needed to link in the readline
 #				and history link libraries
+#	READLINE_EXTRAS		Flags and libs needed to use the readline
+#				and history link libraries
 #	READLINE_INCLUDE	Where the readline include files reside
 #				(leave blank if they are /usr/include/readline)
 #
@@ -806,14 +829,22 @@ USE_READLINE=
 #USE_READLINE= -DUSE_READLINE
 #
 READLINE_LIB=
-#READLINE_LIB= -lreadline -lhistory -lncurses
-#READLINE_LIB= -L/usr/gnu/lib -lreadline -lhistory -lncurses
-#READLINE_LIB= -L/usr/local/lib -lreadline -lhistory -lncurses
+READLINE_EXTRAS=
+#
+#READLINE_LIB= -lreadline
+#READLINE_EXTRAS= -lhistory -lncurses
+#
+#READLINE_LIB= -L/usr/gnu/lib -lreadline
+#READLINE_EXTRAS= -lhistory -lncurses
+#
+#READLINE_LIB= -L/usr/local/lib -lreadline
+#READLINE_EXTRAS= -lhistory -lncurses
 #
 # For Apple OS X: install fink from http://fink.sourceforge.net
 #		  and then do a 'fink install readline' and then use:
 #
-#READLINE_LIB= -L/sw/lib -lreadline -lhistory -lncurses
+#READLINE_LIB= -L/sw/lib -lreadline
+#READLINE_EXTRAS= -lhistory -lncurses
 #
 READLINE_INCLUDE=
 #READLINE_INCLUDE= -I/usr/gnu/include
@@ -923,18 +954,6 @@ CALC_ENV= CALCPATH=./cal LD_LIBRARY_PATH=.
 #	  MALLOC_FASTCHK=1 MALLOC_FULLWARN=1 MALLOC_CLEAR_FREE=1 \
 #	  MALLOC_CLEAR_MALLOC=1 LD_LIBRARY_PATH=.:./custom
 
-# By default, custom builtin functions may only be executed if calc
-# is given the -C option.  This is because custom builtin functions
-# may invoke non-standard or non-portable code.	 One may completely
-# disable custom builtin functions by not compiling any of code
-#
-# ALLOW_CUSTOM= -DCUSTOM	# allow custom only if -C is given
-# ALLOW_CUSTOM=			# disable custom even if -C is given
-#
-# If in doubt, use ALLOW_CUSTOM= -DCUSTOM
-#
-ALLOW_CUSTOM= -DCUSTOM
-#ALLOW_CUSTOM=
 
 # The install rule uses:
 #
@@ -965,14 +984,15 @@ EXT=
 
 # The default calc versions
 #
-VERSION= 2.12.2
-VERS= 2.12.2
+VERSION= 2.12.3.0
+VERS= 2.12.3
 VER= 2.12
 VE= 2
 
 # Names of shared libraries with versions
 #
 LIB_EXT= .so
+LIB_EXT_VERSION= ${LIB_EXT}.${VERSION}
 LIB_EXT_VERS= ${LIB_EXT}.${VERS}
 LIB_EXT_VER= ${LIB_EXT}.${VER}
 LIB_EXT_VE= ${LIB_EXT}.${VE}
@@ -1010,6 +1030,7 @@ LN= ln
 LDCONFIG= ldconfig
 # assume the X11 makedepend tool for the depend rule
 MAKEDEPEND= makedepend
+STRIP= strip
 
 # Extra compiling and linking flags
 #
@@ -1034,7 +1055,15 @@ EXTRA_LDFLAGS=
 # COMMON_CFLAGS are the common ${CC} flags used for all progs, both
 #	    intermediate and final calc and calc related progs
 #
+#if 0	/* start of skip for non-Gnu makefiles */
+ifdef ALLOW_CUSTOM
+#endif	/* end of skip for non-Gnu makefiles */
 COMMON_CFLAGS= -DCALC_SRC ${ALLOW_CUSTOM} ${CCWARN} ${CCMISC} ${EXTRA_CFLAGS}
+#if 0	/* start of skip for non-Gnu makefiles */
+else
+COMMON_CFLAGS= -DCALC_SRC -UCUSTOM ${CCWARN} ${CCMISC} ${EXTRA_CFLAGS}
+endif
+#endif	/* end of skip for non-Gnu makefiles */
 
 # COMMON_LDFLAGS are the common flags used for linking all progs, both
 #	     intermediate and final calc and calc related progs
@@ -1105,8 +1134,12 @@ CC_SHARE= -fPIC
 DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:/usr/local/lib
 LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
     "-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
-LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERS}"
-LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERS}"
+LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
+ifdef ALLOW_CUSTOM
+LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
+else
+LIBCUSTCALC_SHLIB=
+endif
 #
 CC_STATIC=
 LD_STATIC=
@@ -1132,10 +1165,14 @@ ifeq ($(target),Darwin)
 BLD_TYPE= calc-dynamic-only
 #
 CC_SHARE= -fPIC
-DEFAULT_LIB_INSTALL_PATH= ${PWD}:/sw/lib:/usr/lib:${LIBDIR}:/usr/local/lib
+DEFAULT_LIB_INSTALL_PATH= ${PWD}:${LIBDIR}:/usr/local/lib
 LD_SHARE= ${DARWIN_ARCH}
 LIBCALC_SHLIB= -single_module -undefined dynamic_lookup -dynamiclib
+ifdef ALLOW_CUSTOM
 LIBCUSTCALC_SHLIB= -single_module -undefined dynamic_lookup -dynamiclib
+else
+LIBCUSTCALC_SHLIB=
+endif
 #
 CC_STATIC=
 LD_STATIC= ${DARWIN_ARCH}
@@ -1152,11 +1189,14 @@ CC= ${PURIFY} ${LCC} ${CCWERR}
 #
 # Darmin dynamic shared lib filenames
 LIB_EXT:= .dylib
+LIB_EXT_VERSION:= .${VERSION}${LIB_EXT}
 LIB_EXT_VERS:= .${VERS}${LIB_EXT}
 LIB_EXT_VER:= .${VER}${LIB_EXT}
 LIB_EXT_VE:= .${VE}${LIB_EXT}
-# compile Universal by default
-DARWIN_ARCH= -arch i386 -arch ppc
+# DARWIN_ARCH= -arch i386 -arch ppc	# Universal binary
+# DARWIN_ARCH= -arch i386		# Intel binary
+# DARWIN_ARCH= -arch ppc		# PPC binary
+DARWIN_ARCH=				# native binary
 MACOSX_DEPLOYMENT_TARGET=10.4
 #
 endif
@@ -1179,8 +1219,12 @@ CC_SHARE= -fPIC
 DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:/usr/local/lib
 LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
     "-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
-LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERS}"
-LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERS}"
+LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
+ifdef ALLOW_CUSTOM
+LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
+else
+LIBCUSTCALC_SHLIB=
+endif
 #
 CC_STATIC=
 LD_STATIC=
@@ -1199,6 +1243,83 @@ MAKE= gmake
 #
 endif
 
+##################
+# OpenBSD target #
+##################
+
+########################################################################
+# NOTE: You MUST either use gmake (GNU Make) or you must try your luck #
+#       with Makefile.simple and custom/Makefile.simple versions.      #
+#	See HOWTO.INSTALL for more information.                        #
+########################################################################
+
+ifeq ($(target),OpenBSD)
+#
+BLD_TYPE= calc-dynamic-only
+#
+CC_SHARE= -fPIC
+DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:/usr/local/lib
+LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
+    "-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
+LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
+ifdef ALLOW_CUSTOM
+LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
+else
+LIBCUSTCALC_SHLIB=
+endif
+#
+CC_STATIC=
+LD_STATIC=
+LIBCALC_STATIC=
+LIBCUSTCALC_STATIC=
+#
+CCWARN= -Wall
+CCWERR=
+CCOPT= ${DEBUG}
+CCMISC=
+#
+LCC= gcc
+CC= ${PURIFY} ${LCC} ${CCWERR}
+#
+MAKE= gmake
+#
+endif
+
+################
+# SunOS target #
+################
+
+# XXX - this needs to be tested
+ifeq ($(target),SunOS)
+#
+BLD_TYPE= calc-dynamic-only
+#
+CC_SHARE= -fPIC
+DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:/usr/local/lib
+LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
+    "-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
+LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
+ifdef ALLOW_CUSTOM
+LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
+else
+LIBCUSTCALC_SHLIB=
+endif
+#
+CC_STATIC=
+LIBCALC_STATIC=
+LIBCUSTCALC_STATIC=
+LD_STATIC=
+#
+CCWARN= -Wall -W -Wno-comment
+CCWERR=
+CCOPT= ${DEBUG}
+CCMISC=
+#
+LCC= gcc
+CC= ${PURIFY} ${LCC} ${CCWERR}
+#
+endif
+
 #######################################################
 # simple target - values used to form Makefile.simple #
 #######################################################
@@ -1215,8 +1336,8 @@ CC_SHARE= -fPIC
 DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:/usr/local/lib
 LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
     "-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
-LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERS}"
-LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERS}"
+LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
+LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
 #
 CC_STATIC=
 LD_STATIC=
@@ -1262,8 +1383,12 @@ CC_SHARE= -fPIC
 DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:/usr/local/lib
 LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
     "-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
-LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERS}"
-LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERS}"
+LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
+ifdef ALLOW_CUSTOM
+LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
+else
+LIBCUSTCALC_SHLIB=
+endif
 #
 CC_STATIC=
 LIBCALC_STATIC=
@@ -1305,7 +1430,6 @@ CFLAGS= ${ICFLAGS} ${CCOPT}
 #
 ILDFLAGS= ${COMMON_LDFLAGS}
 LDFLAGS= ${LD_DEBUG} ${ILDFLAGS}
-
 #endif	/* end of skip for non-Gnu makefiles */
 
 #######################################################################
@@ -1426,15 +1550,21 @@ UTIL_TMP= ll_tmp fpos_tmp fposv_tmp const_tmp uid_tmp newstr_tmp vs_tmp \
 	memmv_tmp offscl_tmp posscl_tmp newstr_tmp \
 	getsid_tmp gettime_tmp getprid_tmp rusage_tmp strdup_tmp
 
-# these utility progs may be created in the process of building BUILD_H_SRC
+# these utility executables may be created in the process of
+# building the BUILD_H_SRC file set
 #
 UTIL_PROGS= align32${EXT} fposval${EXT} have_uid_t${EXT} have_const${EXT} \
 	endian${EXT} longbits${EXT} have_newstr${EXT} have_stdvs${EXT} \
 	have_varvs${EXT} have_ustat${EXT} have_getsid${EXT} \
 	have_getpgid${EXT} have_gettime${EXT} have_getprid${EXT} \
-	ver_calc${EXT} have_strdup${EXT} no_implicit${EXT} no_implicit.arg \
+	ver_calc${EXT} have_strdup${EXT} no_implicit${EXT} \
 	have_unused${EXT} have_fpos${EXT} have_fpos_pos${EXT} \
-	have_offscl${EXT} have_rusage${EXT} have_args.sh
+	have_offscl${EXT} have_rusage${EXT}
+
+# these utility files and scripts may be created in the process of building
+# the BUILD_H_SRC file set
+#
+UTIL_FILES= no_implicit.arg have_args.sh
 
 # Any .h files that are needed to compile sample code.
 #
@@ -1530,9 +1660,6 @@ HELP_PASSDOWN= \
     COMMON_CFLAGS="${COMMON_CFLAGS}" \
     COMMON_LDFLAGS="${COMMON_LDFLAGS}" \
     CP=${CP} \
-    CUSTOMCALDIR="${CUSTOMCALDIR}" \
-    CUSTOMHELPDIR="${CUSTOMHELPDIR}" \
-    CUSTOMINCDIR="${CUSTOMINCDIR}" \
     EXT=${EXT} \
     FMT=${FMT} \
     HELPDIR="${HELPDIR}" \
@@ -1567,9 +1694,6 @@ CAL_PASSDOWN= \
     CMP=${CMP} \
     CO=${CO} \
     CP=${CP} \
-    CUSTOMCALDIR="${CUSTOMCALDIR}" \
-    CUSTOMHELPDIR="${CUSTOMHELPDIR}" \
-    CUSTOMINCDIR="${CUSTOMINCDIR}" \
     HELPDIR="${HELPDIR}" \
     INCDIR="${INCDIR}" \
     LANG=${LANG} \
@@ -1598,9 +1722,6 @@ CSCRIPT_PASSDOWN= \
     CMP=${CMP} \
     CO=${CO} \
     CP=${CP} \
-    CUSTOMCALDIR="${CUSTOMCALDIR}" \
-    CUSTOMHELPDIR="${CUSTOMHELPDIR}" \
-    CUSTOMINCDIR="${CUSTOMINCDIR}" \
     FMT=${FMT} \
     HELPDIR="${HELPDIR}" \
     INCDIR="${INCDIR}" \
@@ -1649,28 +1770,54 @@ OBJS= ${LIBOBJS} ${CALCOBJS} ${UTIL_OBJS} ${SAMPLE_OBJS}
 
 # static library build
 #
+#if 0	/* start of skip for non-Gnu makefiles */
+ifdef ALLOW_CUSTOM
+#endif	/* end of skip for non-Gnu makefiles */
 CALC_STATIC_LIBS= libcalc.a libcustcalc.a
+#if 0	/* start of skip for non-Gnu makefiles */
+else
+CALC_STATIC_LIBS= libcalc.a
+endif
+#endif	/* end of skip for non-Gnu makefiles */
 
 # Libaraies created and used to build calc
 #
-CALC_DYNAMIC_LIBS= libcalc${LIB_EXT_VERS} libcustcalc${LIB_EXT_VERS}
+#if 0	/* start of skip for non-Gnu makefiles */
+ifdef ALLOW_CUSTOM
+#endif	/* end of skip for non-Gnu makefiles */
+CALC_DYNAMIC_LIBS= libcalc${LIB_EXT_VERSION} libcustcalc${LIB_EXT_VERSION}
+#if 0	/* start of skip for non-Gnu makefiles */
+else
+CALC_DYNAMIC_LIBS= libcalc${LIB_EXT_VERSION}
+endif
+#endif	/* end of skip for non-Gnu makefiles */
 
 # Symlinks of dymanic shared libraries
 #
+#if 0	/* start of skip for non-Gnu makefiles */
+ifdef ALLOW_CUSTOM
+#endif	/* end of skip for non-Gnu makefiles */
 SYM_DYNAMIC_LIBS= libcalc${LIB_EXT_VER} libcalc${LIB_EXT_VE} libcalc${LIB_EXT} \
+	libcalc${LIB_EXT_VERS} libcustcalc${LIB_EXT_VERSION} \
 	libcustcalc${LIB_EXT_VERS} libcustcalc${LIB_EXT_VER} \
 	libcustcalc${LIB_EXT_VE} libcustcalc${LIB_EXT}
+#if 0	/* start of skip for non-Gnu makefiles */
+else
+SYM_DYNAMIC_LIBS= libcalc${LIB_EXT_VER} libcalc${LIB_EXT_VE} libcalc${LIB_EXT} \
+	libcalc${LIB_EXT_VERS}
+endif
+#endif	/* end of skip for non-Gnu makefiles */
 
 # list of sample programs to that need to be built to satisfy sample rule
 #
 # NOTE: The ${SAMPLE_TARGETS} and ${SAMPLE_STATIC_TARGETS} are built but
 #	not installed at this time.
 #
-# NOTE: There must be a foo-static${EXE} in SAMPLE_STATIC_TARGETS for
-#	every foo${EXE} in ${SAMPLE_TARGETS}.
+# NOTE: There must be a foo-static${EXT} in SAMPLE_STATIC_TARGETS for
+#	every foo${EXT} in ${SAMPLE_TARGETS}.
 #
-SAMPLE_TARGETS= sample_rand${EXE} sample_many${EXE}
-SAMPLE_STATIC_TARGETS= sample_rand-static${EXE} sample_many-static${EXE}
+SAMPLE_TARGETS= sample_rand${EXT} sample_many${EXT}
+SAMPLE_STATIC_TARGETS= sample_rand-static${EXT} sample_many-static${EXT}
 
 # list of cscript programs to that need to be built to satisfy cscript/.all
 #
@@ -1690,7 +1837,15 @@ STATIC_FIRST_TARGETS= ${LICENSE} .static
 
 # early targets - things needed before the main build phase can begin
 #
+#if 0	/* start of skip for non-Gnu makefiles */
+ifdef ALLOW_CUSTOM
+#endif	/* end of skip for non-Gnu makefiles */
 EARLY_TARGETS= custom/Makefile hsrc .hsrc custom/.all
+#if 0	/* start of skip for non-Gnu makefiles */
+else
+EARLY_TARGETS= hsrc .hsrc
+endif
+#endif	/* end of skip for non-Gnu makefiles */
 
 # late targets - things needed after the main build phase is complete
 #
@@ -1734,7 +1889,7 @@ calc-dynamic-only: ${DYNAMIC_FIRST_TARGETS} ${EARLY_TARGETS} \
 	${Q} for i in .static calc-static${EXT} ${SAMPLE_STATIC_TARGETS} \
 		      libcalc.a custom/libcustcalc.a; do \
 	    r="calc-dynamic-only"; \
-	    if [ -e "$$i" ]; then \
+	    if [ -r "$$i" ]; then \
 		echo "Found the static target $$i file.  You must:" 1>&2; \
 		echo "" 1>&2; \
 		echo "      ${MAKE} -f ${MAKE_FILE} clobber" 1>&2; \
@@ -1752,7 +1907,9 @@ calc-static-only: ${STATIC_FIRST_TARGETS} ${EARLY_TARGETS} \
 		  ${CALC_STATIC_LIBS} calc-static${EXT} \
 		  ${SAMPLE_STATIC_TARGETS} ${LATE_TARGETS}
 	${Q} for i in calc${EXT} ${SAMPLE_TARGETS}; do \
-	    if ! ${CMP} -s "$$i-static" "$$i"; then \
+	    if ${CMP} -s "$$i-static" "$$i"; then \
+		${TRUE}; \
+	    else \
 		${RM} -f "$$i"; \
 		${LN} "$$i-static" "$$i"; \
 	    fi; \
@@ -1776,9 +1933,9 @@ calc-static-only: ${STATIC_FIRST_TARGETS} ${EARLY_TARGETS} \
 	    exit 3; \
 	fi
 	${Q} for i in .dynamic ${CALC_DYNAMIC_LIBS} ${SYM_DYNAMIC_LIBS} \
-		      custom/libcustcalc${LIB_EXT_VERS}; do \
+		      custom/libcustcalc${LIB_EXT_VERSION}; do \
 	    r="calc-static-only"; \
-	    if [ -e "$$i" ]; then \
+	    if [ -r "$$i" ]; then \
 		echo "Found the dynamic target $$i file.  You must:" 1>&2; \
 		echo "" 1>&2; \
 		echo "      ${MAKE} -f ${MAKE_FILE} clobber" 1>&2; \
@@ -1795,20 +1952,25 @@ calc-static-only: ${STATIC_FIRST_TARGETS} ${EARLY_TARGETS} \
 calc${EXT}: .hsrc ${CALCOBJS} ${CALC_DYNAMIC_LIBS} ${MAKE_FILE}
 	${RM} -f $@
 	${CC} ${CALCOBJS} ${LDFLAGS} ${LD_SHARE} ${CALC_DYNAMIC_LIBS} \
-	      ${READLINE_LIB} -o $@
+	      ${READLINE_LIB} ${READLINE_EXTRAS} -o $@
 
-libcalc${LIB_EXT_VERS}: ${LIBOBJS} ver_calc${EXE} ${MAKE_FILE}
-	${CC} ${LIBCALC_SHLIB} ${LIBOBJS} -o libcalc${LIB_EXT_VERS}
+libcalc${LIB_EXT_VERSION}: ${LIBOBJS} ver_calc${EXT} ${MAKE_FILE}
+	${CC} ${LIBCALC_SHLIB} ${LIBOBJS} \
+	      ${READLINE_LIB} ${READLINE_EXTRAS} -o libcalc${LIB_EXT_VERSION}
 
-libcalc${LIB_EXT_VER}: libcalc${LIB_EXT_VERS}
+libcalc${LIB_EXT_VERS}: libcalc${LIB_EXT_VERSION}
 	${Q} ${RM} -f $@
 	${LN} -s $? $@
 
-libcalc${LIB_EXT_VE}: libcalc${LIB_EXT_VERS}
+libcalc${LIB_EXT_VER}: libcalc${LIB_EXT_VERSION}
 	${Q} ${RM} -f $@
 	${LN} -s $? $@
 
-libcalc${LIB_EXT}: libcalc${LIB_EXT_VERS}
+libcalc${LIB_EXT_VE}: libcalc${LIB_EXT_VERSION}
+	${Q} ${RM} -f $@
+	${LN} -s $? $@
+
+libcalc${LIB_EXT}: libcalc${LIB_EXT_VERSION}
 	${Q} ${RM} -f $@
 	${LN} -s $? $@
 
@@ -1851,13 +2013,13 @@ calc.usage: calc.1 ${MAKE_FILE}
 
 sample: ${SAMPLE_TARGETS}
 
-sample_rand${EXE}: sample_rand.o ${CALC_DYNAMIC_LIBS} ${MAKE_FILE}
+sample_rand${EXT}: sample_rand.o ${CALC_DYNAMIC_LIBS} ${MAKE_FILE}
 	${CC} sample_rand.o ${CLDFALGS} ${LD_SHARE} ${CALC_DYNAMIC_LIBS} \
-	      ${READLINE_LIB} -o $@
+	      ${READLINE_LIB} ${READLINE_EXTRAS} -o $@
 
-sample_many${EXE}: sample_many.o ${CALC_DYNAMIC_LIBS} ${MAKE_FILE}
+sample_many${EXT}: sample_many.o ${CALC_DYNAMIC_LIBS} ${MAKE_FILE}
 	${CC} sample_many.o ${CLDFALGS} ${LD_SHARE} ${CALC_DYNAMIC_LIBS} \
-	      ${READLINE_LIB} -o $@
+	      ${READLINE_LIB} ${READLINE_EXTRAS} -o $@
 
 ###
 #
@@ -1921,11 +2083,17 @@ conf.h: ${MAKE_FILE}
 	${Q} echo '#define HELPDIR "${HELPDIR}"' >> conf.h
 	${Q} echo '#endif /* HELPDIR */' >> conf.h
 	${Q} echo '' >> conf.h
+#if 0	/* start of skip for non-Gnu makefiles */
+ifdef ALLOW_CUSTOM
+#endif	/* end of skip for non-Gnu makefiles */
 	${Q} echo '/* the location of the custom help directory */' >> conf.h
 	${Q} echo '#if !defined(CUSTOMHELPDIR)' >> conf.h
 	${Q} echo '#define CUSTOMHELPDIR "${CUSTOMHELPDIR}"' >> conf.h
 	${Q} echo '#endif /* CUSTOMHELPDIR */' >> conf.h
 	${Q} echo '' >> conf.h
+#if 0	/* start of skip for non-Gnu makefiles */
+endif
+#endif	/* end of skip for non-Gnu makefiles */
 	${Q} echo '/* the default pager to use */' >> conf.h
 	${Q} echo '#if !defined(DEFAULTCALCPAGER)' >> conf.h
 	${Q} echo '#define DEFAULTCALCPAGER "${CALCPAGER}"' >> conf.h
@@ -1957,7 +2125,7 @@ endian_calc.h: endian${EXT} ${MAKE_FILE}
 	${Q} echo '' >> endian_calc.h
 	${Q} echo '' >> endian_calc.h
 	${Q} echo '/* what byte order are we? */' >> endian_calc.h
-	-${Q} if [ X"${BYTE_ORDER}" = X ]; then \
+	-${Q} if [ X"${CALC_BYTE_ORDER}" = X ]; then \
 	    if [ -f ${INCDIR}/endian.h ]; then \
 		echo '#include <endian.h>' >> endian_calc.h; \
 		echo '#define CALC_BYTE_ORDER BYTE_ORDER' >> endian_calc.h; \
@@ -2903,7 +3071,7 @@ have_urandom.h: ${MAKE_FILE}
 	    echo '#define HAVE_URANDOM_H	/* yes */' >> have_urandom.h; \
 	elif [ X"${HAVE_URANDOM_H}" = X"NO" ]; then \
 	    echo '#undef HAVE_URANDOM_H  /* no */' >> have_urandom.h; \
-	elif [ -e /dev/urandom ] 2>/dev/null; then \
+	elif [ -r /dev/urandom ] 2>/dev/null; then \
 	    echo '#define HAVE_URANDOM_H  /* yes */' >> have_urandom.h; \
 	else \
 	    echo '#undef HAVE_URANDOM_H	 /* no */' >> have_urandom.h; \
@@ -3202,6 +3370,7 @@ win32_hsrc: win32.mkdef ${MAKE_FILE}
 	 ${RM} -f ${UTIL_MISC_SRC}; \
 	 ${RM} -f ${UTIL_OBJS}; \
 	 ${RM} -f ${UTIL_PROGS}; \
+	 ${RM} -f ${UTIL_FILES}; \
 	 ${RM} -f ${MAKE_FILE})
 	${Q} echo 'win32 directory formed'
 
@@ -3212,7 +3381,7 @@ win32_hsrc: win32.mkdef ${MAKE_FILE}
 ###
 
 endian.o: endian.c have_unistd.h
-	${LCC} ${ICFLAGS} ${BYTE_ORDER} endian.c -c
+	${LCC} ${ICFLAGS} ${CALC_BYTE_ORDER} endian.c -c
 
 endian${EXT}: endian.o
 	${RM} -f $@
@@ -3267,6 +3436,9 @@ ${CSCRIPT_TARGETS}: cscript/Makefile
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
 	${V} echo '=-=-=-=-= ${MAKE_FILE} end of $@ rule =-=-=-=-='
 
+#if 0	/* start of skip for non-Gnu makefiles */
+ifdef ALLOW_CUSTOM
+#endif	/* end of skip for non-Gnu makefiles */
 custom/.all: custom/Makefile
 	${V} echo '=-=-=-=-= ${MAKE_FILE} start of $@ rule =-=-=-=-='
 	${V} echo '=-=-=-=-= Invoking all rule for custom =-=-=-=-='
@@ -3275,29 +3447,36 @@ custom/.all: custom/Makefile
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
 	${V} echo '=-=-=-=-= ${MAKE_FILE} end of $@ rule =-=-=-=-='
 
-custom/libcustcalc${LIB_EXT_VERS}: custom/Makefile
+custom/libcustcalc${LIB_EXT_VERSION}: custom/Makefile
 	${V} echo '=-=-=-=-= ${MAKE_FILE} start of $@ rule =-=-=-=-='
 	${V} echo '=-=-=-=-= Invoking all rule for custom =-=-=-=-='
 	cd custom; ${MAKE} -f Makefile ${CUSTOM_PASSDOWN} $@
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
 	${V} echo '=-=-=-=-= ${MAKE_FILE} end of $@ rule =-=-=-=-='
 
-libcustcalc${LIB_EXT_VERS}: custom/libcustcalc${LIB_EXT_VERS}
+libcustcalc${LIB_EXT_VERSION}: custom/libcustcalc${LIB_EXT_VERSION}
 	${Q} ${RM} -f $@
 	${CP} -p $? $@
 
-libcustcalc${LIB_EXT_VER}: libcustcalc${LIB_EXT_VERS}
+libcustcalc${LIB_EXT_VERS}: custom/libcustcalc${LIB_EXT_VERSION}
 	${Q} ${RM} -f $@
 	${LN} -s $? $@
 
-libcustcalc${LIB_EXT_VE}: libcustcalc${LIB_EXT_VERS}
+libcustcalc${LIB_EXT_VER}: libcustcalc${LIB_EXT_VERSION}
 	${Q} ${RM} -f $@
 	${LN} -s $? $@
 
-libcustcalc${LIB_EXT}: libcustcalc${LIB_EXT_VERS}
+libcustcalc${LIB_EXT_VE}: libcustcalc${LIB_EXT_VERSION}
 	${Q} ${RM} -f $@
 	${LN} -s $? $@
 
+libcustcalc${LIB_EXT}: libcustcalc${LIB_EXT_VERSION}
+	${Q} ${RM} -f $@
+	${LN} -s $? $@
+#if 0	/* start of skip for non-Gnu makefiles */
+endif
+#endif	/* end of skip for non-Gnu makefiles */
+
 ###
 #
 # building calc-static and static lib*.a libraires
@@ -3308,7 +3487,7 @@ calc-static${EXT}: .hsrc ${CALCOBJS} \
 		   ${CALC_STATIC_LIBS} ${MAKE_FILE}
 	${RM} -f $@
 	${CC} ${LDFLAGS} ${CALCOBJS} ${LD_STATIC} ${CALC_STATIC_LIBS} \
-	      ${READLINE_LIB} -o $@
+	      ${READLINE_LIB} ${READLINE_EXTRAS} -o $@
 
 libcustcalc.a: custom/libcustcalc.a
 	${Q} ${RM} -f $@
@@ -3320,16 +3499,22 @@ libcalc.a: ${LIBOBJS} ${MAKE_FILE}
 	${RANLIB} libcalc.a
 	${CHMOD} 0644 libcalc.a
 
+#if 0	/* start of skip for non-Gnu makefiles */
+ifdef ALLOW_CUSTOM
+#endif	/* end of skip for non-Gnu makefiles */
 custom/libcustcalc.a: custom/Makefile
 	cd custom; ${MAKE} -f Makefile ${CUSTOM_PASSDOWN} libcustcalc.a
+#if 0	/* start of skip for non-Gnu makefiles */
+endif
+#endif	/* end of skip for non-Gnu makefiles */
 
-sample_rand-static${EXE}: sample_rand.o ${CALC_STATIC_LIBS} ${MAKE_FILE}
+sample_rand-static${EXT}: sample_rand.o ${CALC_STATIC_LIBS} ${MAKE_FILE}
 	${CC} ${LDFLAGS} sample_rand.o ${LD_STATIC} \
-	      ${CALC_STATIC_LIBS} ${READLINE_LIB} -o $@
+	      ${CALC_STATIC_LIBS} ${READLINE_LIB} ${READLINE_EXTRAS} -o $@
 
-sample_many-static${EXE}: sample_many.o ${CALC_STATIC_LIBS} ${MAKE_FILE}
+sample_many-static${EXT}: sample_many.o ${CALC_STATIC_LIBS} ${MAKE_FILE}
 	${CC} ${LDFLAGS} sample_many.o ${LD_STATIC} \
-	      ${CALC_STATIC_LIBS} ${READLINE_LIB} -o $@
+	      ${CALC_STATIC_LIBS} ${READLINE_LIB} ${READLINE_EXTRAS} -o $@
 
 ###
 #
@@ -3733,6 +3918,7 @@ env:
 	@echo 'PURIFY=${PURIFY}'; echo ''
 	@echo 'Q=${Q}'; echo ''
 	@echo 'RANLIB=${RANLIB}'; echo ''
+	@echo 'READLINE_EXTRAS=${READLINE_EXTRAS}'; echo ''
 	@echo 'READLINE_INCLUDE=${READLINE_INCLUDE}'; echo ''
 	@echo 'READLINE_LIB=${READLINE_LIB}'; echo ''
 	@echo 'RM=${RM}'; echo ''
@@ -3760,6 +3946,7 @@ env:
 	@echo 'UTIL_C_SRC=${UTIL_C_SRC}'; echo ''
 	@echo 'UTIL_MISC_SRC=${UTIL_MISC_SRC}'; echo ''
 	@echo 'UTIL_OBJS=${UTIL_OBJS}'; echo ''
+	@echo 'UTIL_FILES=${UTIL_FILES}'; echo ''
 	@echo 'UTIL_PROGS=${UTIL_PROGS}'; echo ''
 	@echo 'UTIL_TMP=${UTIL_TMP}'; echo ''
 	@echo 'V=${V}'; echo ''
@@ -3841,8 +4028,7 @@ gdb:
 
 rpm: clobber rpm.mk calc.spec.in
 	${V} echo '=-=-=-=-= ${MAKE_FILE} start of $@ rule =-=-=-=-='
-	${RM} -rf /var/tmp/redhat /var/tmp/calc-root
-	${MAKE} -f rpm.mk RHDIR=/var/tmp/redhat TMPDIR=/var/tmp/redhat V=${V}
+	${MAKE} -f rpm.mk V=${V}
 	${V} echo '=-=-=-=-= ${MAKE_FILE} end of $@ rule =-=-=-=-='
 
 # rpm static rules
@@ -3953,6 +4139,7 @@ clean: custom/Makefile
 	${RM} -f ${UTIL_OBJS}
 	${RM} -f ${UTIL_TMP}
 	${RM} -f ${UTIL_PROGS}
+	${RM} -f ${UTIL_FILES}
 	${RM} -f ${SAMPLE_OBJ}
 	${RM} -f .libcustcalc_error
 	${RM} -f calc.spec.sed
@@ -3992,28 +4179,31 @@ clobber: custom/Makefile clean
 	${RM} -f calc.pixie calc.rf calc.Counts calc.cord
 	${RM} -rf gen_h skel Makefile.bak tmp.patch
 	${RM} -f calc.spec inst_files rpm.mk.patch tmp
+	${RM} -f libcalc${LIB_EXT_VERSION}
 	${RM} -f libcalc${LIB_EXT_VERS}
 	${RM} -f libcalc${LIB_EXT_VER}
 	${RM} -f libcalc${LIB_EXT_VE}
 	${RM} -f libcalc*${LIB_EXT}
+	${RM} -f libcustcalc${LIB_EXT_VERSION}
 	${RM} -f libcustcalc${LIB_EXT_VERS}
 	${RM} -f libcustcalc${LIB_EXT_VER}
 	${RM} -f libcustcalc${LIB_EXT_VE}
 	${RM} -f libcustcalc*${LIB_EXT}
 	${RM} -f libcustcalc.a
-	${RM} -f calc-static${EXE}
+	${RM} -f calc-static${EXT}
 	${RM} -f ${CALC_STATIC_LIBS}
+	${RM} -f all
 	${V} echo '=-=-=-=-= Invoking $@ rule for help =-=-=-=-='
-	-cd help; ${MAKE} -f Makefile ${HELP_PASSDOWN} clobber
+	-cd help; ${RM} -f all; ${MAKE} -f Makefile ${HELP_PASSDOWN} $@
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
 	${V} echo '=-=-=-=-= Invoking $@ rule for cal =-=-=-=-='
-	-cd cal; ${MAKE} -f Makefile ${CAL_PASSDOWN} clobber
+	-cd cal; ${RM} -f all; ${MAKE} -f Makefile ${CAL_PASSDOWN} $@
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
 	${V} echo '=-=-=-=-= Invoking $@ rule for custom =-=-=-=-='
-	cd custom; ${MAKE} -f Makefile ${CUSTOM_PASSDOWN} clobber
+	cd custom; ${RM} -f all; ${MAKE} -f Makefile ${CUSTOM_PASSDOWN} $@
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
 	${V} echo '=-=-=-=-= Invoking $@ rule for cscript =-=-=-=-='
-	cd cscript; ${MAKE} -f Makefile ${CSCRIPT_PASSDOWN} clobber
+	cd cscript; ${RM} -f all; ${MAKE} -f Makefile ${CSCRIPT_PASSDOWN} $@
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
 	${V} echo remove files that are obsolete
 	${RM} -rf win32 build
@@ -4021,7 +4211,7 @@ clobber: custom/Makefile clean
 	${RM} -f Makefile.simple
 	${RM} -f custom/Makefile
 #endif	/* end of skip for non-Gnu makefiles */
-	${RM} -f .static .dynamic
+	${RM} -f .static .dynamic calc-dynamic-only calc-static-only
 	${V} echo '=-=-=-=-= ${MAKE_FILE} end of $@ rule =-=-=-=-='
 
 # install everything
@@ -4086,6 +4276,9 @@ install: custom/Makefile ${LIB_H_SRC} ${BUILD_H_SRC} calc.1 all
 	else \
 	    ${TRUE}; \
 	fi
+#if 0	/* start of skip for non-Gnu makefiles */
+ifdef ALLOW_CUSTOM
+#endif	/* end of skip for non-Gnu makefiles */
 	-${Q} if [ ! -d ${T}${CUSTOMCALDIR} ]; then \
 	    echo ${MKDIR} ${MKDIR_ARG} ${T}${CUSTOMCALDIR}; \
 	    ${MKDIR} ${MKDIR_ARG} ${T}${CUSTOMCALDIR}; \
@@ -4110,6 +4303,9 @@ install: custom/Makefile ${LIB_H_SRC} ${BUILD_H_SRC} calc.1 all
 	else \
 	    ${TRUE}; \
 	fi
+#if 0	/* start of skip for non-Gnu makefiles */
+endif
+#endif	/* end of skip for non-Gnu makefiles */
 	-${Q} if [ ! -d ${T}${SCRIPTDIR} ]; then \
 	    echo ${MKDIR} ${MKDIR_ARG} ${T}${SCRIPTDIR}; \
 	    ${MKDIR} ${MKDIR_ARG} ${T}${SCRIPTDIR}; \
@@ -4151,7 +4347,7 @@ install: custom/Makefile ${LIB_H_SRC} ${BUILD_H_SRC} calc.1 all
 	    ${MV} -f ${T}${BINDIR}/calc.new${EXT} ${T}${BINDIR}/calc${EXT}; \
 	    echo "installed ${T}${BINDIR}/calc${EXT}"; \
 	fi
-	-${Q} if [ -f calc-static${EXE} ]; then \
+	-${Q} if [ -f calc-static${EXT} ]; then \
 	    if ${CMP} -s calc-static${EXT} \
 	    		 ${T}${BINDIR}/calc-static${EXT}; then \
 		${TRUE}; \
@@ -4171,9 +4367,15 @@ install: custom/Makefile ${LIB_H_SRC} ${BUILD_H_SRC} calc.1 all
 	${V} echo '=-=-=-=-= Invoking $@ rule for cal =-=-=-=-='
 	${Q} cd cal; ${MAKE} -f Makefile ${CAL_PASSDOWN} install
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
+#if 0	/* start of skip for non-Gnu makefiles */
+ifdef ALLOW_CUSTOM
+#endif	/* end of skip for non-Gnu makefiles */
 	${V} echo '=-=-=-=-= Invoking $@ rule for custom =-=-=-=-='
 	${Q} cd custom; ${MAKE} -f Makefile ${CUSTOM_PASSDOWN} install
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
+#if 0	/* start of skip for non-Gnu makefiles */
+endif
+#endif	/* end of skip for non-Gnu makefiles */
 	${V} echo '=-=-=-=-= Invoking $@ rule for cscript =-=-=-=-='
 	${Q} cd cscript; ${MAKE} -f Makefile ${CSCRIPT_PASSDOWN} install
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
@@ -4189,43 +4391,49 @@ install: custom/Makefile ${LIB_H_SRC} ${BUILD_H_SRC} calc.1 all
 		echo "installed ${T}${LIBDIR}/libcalc.a"; \
 	   fi; \
 	fi
-	${Q}# NOTE: The this makefile installs libcustcalc${LIB_EXT_VERS}
+	${Q}# NOTE: The this makefile installs libcustcalc${LIB_EXT_VERSION}
 	${Q}#       because we only want to perform one ${LDCONFIG} for both
-	${Q}#       libcalc${LIB_EXT_VERS} and libcustcalc${LIB_EXT_VERS}.
-	-${Q} if ${CMP} -s libcalc${LIB_EXT_VERS} \
-		     ${T}${LIBDIR}/libcalc${LIB_EXT_VERS} && \
-	   ${CMP} -s custom/libcustcalc${LIB_EXT_VERS} \
-		     ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}; then \
+	${Q}#       libcalc${LIB_EXT_VERSION} and libcustcalc${LIB_EXT_VERSION}.
+	-${Q} if ${CMP} -s libcalc${LIB_EXT_VERSION} \
+		     ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION} && \
+	   ${CMP} -s custom/libcustcalc${LIB_EXT_VERSION} \
+		     ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}; then \
 	    ${TRUE}; \
 	else \
-	    ${RM} -f ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}.new; \
-	    ${CP} -f libcalc${LIB_EXT_VERS} \
-	    	     ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}.new; \
-	    ${MV} -f ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}.new \
-	    	     ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}; \
+	    ${RM} -f ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}.new; \
+	    ${CP} -f libcalc${LIB_EXT_VERSION} \
+	    	     ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}.new; \
+	    ${MV} -f ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}.new \
+	    	     ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}; \
+	    echo "installed ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}"; \
+	    ${LN} -f -s libcalc${LIB_EXT_VERSION} \
+	    		${T}${LIBDIR}/libcalc${LIB_EXT_VERS}; \
 	    echo "installed ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}"; \
-	    ${LN} -f -s libcalc${LIB_EXT_VERS} \
+	    ${LN} -f -s libcalc${LIB_EXT_VERSION} \
 	    		${T}${LIBDIR}/libcalc${LIB_EXT_VER}; \
 	    echo "installed ${T}${LIBDIR}/libcalc${LIB_EXT_VER}"; \
-	    ${LN} -f -s libcalc${LIB_EXT_VERS} \
+	    ${LN} -f -s libcalc${LIB_EXT_VERSION} \
 	    		${T}${LIBDIR}/libcalc${LIB_EXT_VE}; \
 	    echo "installed ${T}${LIBDIR}/libcalc${LIB_EXT_VE}"; \
-	    ${LN} -f -s libcalc${LIB_EXT_VERS} \
+	    ${LN} -f -s libcalc${LIB_EXT_VERSION} \
 	    		${T}${LIBDIR}/libcalc${LIB_EXT}; \
 	    echo "installed ${T}${LIBDIR}/libcalc${LIB_EXT}"; \
-	    ${RM} -f ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}.new; \
-	    ${CP} -f custom/libcustcalc${LIB_EXT_VERS} \
-	    	     ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}.new; \
-	    ${MV} -f ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}.new \
-	    	     ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}; \
+	    ${RM} -f ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}.new; \
+	    ${CP} -f custom/libcustcalc${LIB_EXT_VERSION} \
+	    	     ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}.new; \
+	    ${MV} -f ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}.new \
+	    	     ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}; \
+	    echo "installed ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}"; \
+	    ${LN} -f -s libcustcalc${LIB_EXT_VERSION} \
+	    		${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}; \
 	    echo "installed ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}"; \
-	    ${LN} -f -s libcustcalc${LIB_EXT_VERS} \
+	    ${LN} -f -s libcustcalc${LIB_EXT_VERSION} \
 	    		${T}${LIBDIR}/libcustcalc${LIB_EXT_VER}; \
 	    echo "installed ${T}${LIBDIR}/libcustcalc${LIB_EXT_VER}"; \
-	    ${LN} -f -s libcustcalc${LIB_EXT_VERS} \
+	    ${LN} -f -s libcustcalc${LIB_EXT_VERSION} \
 	    		${T}${LIBDIR}/libcustcalc${LIB_EXT_VE}; \
 	    echo "installed ${T}${LIBDIR}/libcalc${LIB_EXT_VE}"; \
-	    ${LN} -f -s libcustcalc${LIB_EXT_VERS} \
+	    ${LN} -f -s libcustcalc${LIB_EXT_VERSION} \
 	    		${T}${LIBDIR}/libcustcalc${LIB_EXT}; \
 	    echo "installed ${T}${LIBDIR}/libcalc${LIB_EXT}"; \
 	    if [ -z "${T}" -o "/" = "${T}" ]; then \
@@ -4385,12 +4593,12 @@ uninstall: custom/Makefile
 		echo "uninstalled ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}"; \
 	    fi; \
 	fi
-	-${Q} if [ -f "${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}" ]; then \
-	    ${RM} -f "${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}"; \
-	    if [ -f "${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}" ]; then \
-		echo "cannot uninstall ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}"; \
+	-${Q} if [ -f "${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}" ]; then \
+	    ${RM} -f "${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}"; \
+	    if [ -f "${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}" ]; then \
+		echo "cannot uninstall ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}"; \
 	    else \
-		echo "uninstalled ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}"; \
+		echo "uninstalled ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}"; \
 	    fi; \
 	fi
 	-${Q} if [ -f "${T}${LIBDIR}/libcalc${LIB_EXT}" ]; then \
@@ -4425,12 +4633,12 @@ uninstall: custom/Makefile
 		echo "uninstalled ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}"; \
 	    fi; \
 	fi
-	-${Q} if [ -f "${T}${LIBDIR}/libcalc${LIB_EXT_VERS}" ]; then \
-	    ${RM} -f "${T}${LIBDIR}/libcalc${LIB_EXT_VERS}"; \
-	    if [ -f "${T}${LIBDIR}/libcalc${LIB_EXT_VERS}" ]; then \
-		echo "cannot uninstall ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}"; \
+	-${Q} if [ -f "${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}" ]; then \
+	    ${RM} -f "${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}"; \
+	    if [ -f "${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}" ]; then \
+		echo "cannot uninstall ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}"; \
 	    else \
-		echo "uninstalled ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}"; \
+		echo "uninstalled ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}"; \
 	    fi; \
 	fi
 	-${Q} if [ -z "${T}" -o "/" = "${T}" ]; then \
@@ -4496,6 +4704,20 @@ splint: #hsrc
 	${SPLINT} ${SPLINT_OPTS} -DCALC_SRC -I. \
 	    ${CALCSRC} ${LIBSRC} ${BUILD_C_SRC} ${UTIL_C_SRC}
 
+# strip - for reducing the size of the binary files
+#
+strip:
+	${V} echo '=-=-=-=-= ${MAKE_FILE} start of $@ rule =-=-=-=-='
+	${Q} for i in ${UTIL_PROGS} ${SAMPLE_TARGETS} ${SAMPLE_STATIC_TARGETS} \
+		 calc${EXT} calc-static${EXT} ${CALC_DYNAMIC_LIBS} \
+		 ${CALC_STATIC_LIBS}; do \
+	    if [ -s "$$i" -a -w "$$i" ]; then \
+		${STRIP} "$$i"; \
+		echo "stripped $$i"; \
+	    fi; \
+	done
+	${V} echo '=-=-=-=-= ${MAKE_FILE} end of $@ rule =-=-=-=-='
+
 ###
 #
 # make depend stuff

Makefile.simple

@@ -11,7 +11,7 @@
 # (Generic calc makefile)
 #
 #  NOTE: This is NOT the calc rpm Makefile.  This Makefile is a generic
-#	 Makefile for the people who build calc from the gziped tarball.
+#	 Makefile for the people who build calc from the bzip2-ed tarball.
 #	 Without modification, it not assume the system has readline, ncurses
 #	 or less.  It compiles with gcc -O3 -g3 as well.  You can change all
 #	 this by modifying the Makefile variables below.
@@ -20,7 +20,8 @@
 #	 has the GNU readline headers and libaraies:
 #
 #	 USE_READLINE= -DUSE_READLINE
-#	 READLINE_LIB= -lreadline -lhistory -lncurses
+#	 READLINE_LIB= -lreadline
+#	 READLINE_EXTRAS= -lhistory -lncurses
 #
 # Copyright (C) 1999-2007  Landon Curt Noll
 #
@@ -38,8 +39,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-MAKEFILE_REV= $$Revision: 30.18 $$
-# @(#) $Id: Makefile.ship,v 30.18 2007/09/02 05:38:34 chongo Exp $
+MAKEFILE_REV= $$Revision: 30.27 $$
+# @(#) $Id: Makefile.ship,v 30.27 2008/02/24 07:58:36 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/Makefile.ship,v $
 #
 # Under source code control:	1990/02/15 01:48:41
@@ -105,19 +106,19 @@ HAVE_VSPRINTF=
 #    Big Endian:	Amdahl, 68k, Pyramid, Mips, Sparc, ...
 #    Little Endian:	Vax, 32k, Spim (Dec Mips), i386, i486, ...
 #
-# If in doubt, leave BYTE_ORDER empty.	This Makefile will attempt to
+# If in doubt, leave CALC_BYTE_ORDER empty.  This Makefile will attempt to
 # use BYTE_ORDER in <machine/endian.h> or it will attempt to run
 # the endian program.  If you get syntax errors when you compile,
 # try forcing the value to be -DBIG_ENDIAN and run the calc regression
 # tests. (see the README file)	If the calc regression tests fail, do
-# a make clobber and try -DLITTLE_ENDIAN.   If that fails, ask a wizard
+# a make clobber and try -DCALC_LITTLE_ENDIAN.   If that fails, ask a wizard
 # for help.
 #
-# Select BYTE_ORDER= -DLITTLE_ENDIAN for DJGPP.
+# Select CALC_BYTE_ORDER= -DCALC_LITTLE_ENDIAN for DJGPP.
 #
-BYTE_ORDER=
-#BYTE_ORDER= -DBIG_ENDIAN
-#BYTE_ORDER= -DLITTLE_ENDIAN
+CALC_BYTE_ORDER=
+#CALC_BYTE_ORDER= -DCALC_BIG_ENDIAN
+#CALC_BYTE_ORDER= -DCALC_LITTLE_ENDIAN
 
 # Determine the number of bits in a long
 #
@@ -752,13 +753,25 @@ MANMAKE= /usr/local/bin/manmake
 MANMODE= 0444
 CATMODE= 0444
 
+# By default, custom builtin functions may only be executed if calc
+# is given the -C option.  This is because custom builtin functions
+# may invoke non-standard or non-portable code.	 One may completely
+# disable custom builtin functions by not compiling any of code
+#
+# ALLOW_CUSTOM= -DCUSTOM	# allow custom only if -C is given
+# ALLOW_CUSTOM=			# disable custom even if -C is given
+#
+# If in doubt, use ALLOW_CUSTOM= -DCUSTOM
+#
+ALLOW_CUSTOM= -DCUSTOM
+#ALLOW_CUSTOM=
+
 # If the $CALCPATH environment variable is not defined, then the following
 # path will be search for calc resource file routines.
 #
 # Select CALCPATH= .;./cal;~/.cal;${CALC_SHAREDIR};${CUSTOMCALDIR} for DJGPP.
 #
 CALCPATH= .:./cal:~/.cal:${CALC_SHAREDIR}:${CUSTOMCALDIR}
-#CALCPATH= .;./cal;~/.cal;${CALC_SHAREDIR};${CUSTOMCALDIR}
 
 # If the $CALCRC environment variable is not defined, then the following
 # path will be search for calc resource files.
@@ -778,6 +791,8 @@ CALCRC= ${CALC_SHAREDIR}/startup:~/.calcrc:./.calcinit
 #
 #	READLINE_LIB		The flags needed to link in the readline
 #				and history link libraries
+#	READLINE_EXTRAS		Flags and libs needed to use the readline
+#				and history link libraries
 #	READLINE_INCLUDE	Where the readline include files reside
 #				(leave blank if they are /usr/include/readline)
 #
@@ -791,14 +806,22 @@ USE_READLINE=
 #USE_READLINE= -DUSE_READLINE
 #
 READLINE_LIB=
-#READLINE_LIB= -lreadline -lhistory -lncurses
-#READLINE_LIB= -L/usr/gnu/lib -lreadline -lhistory -lncurses
-#READLINE_LIB= -L/usr/local/lib -lreadline -lhistory -lncurses
+READLINE_EXTRAS=
+#
+#READLINE_LIB= -lreadline
+#READLINE_EXTRAS= -lhistory -lncurses
+#
+#READLINE_LIB= -L/usr/gnu/lib -lreadline
+#READLINE_EXTRAS= -lhistory -lncurses
+#
+#READLINE_LIB= -L/usr/local/lib -lreadline
+#READLINE_EXTRAS= -lhistory -lncurses
 #
 # For Apple OS X: install fink from http://fink.sourceforge.net
 #		  and then do a 'fink install readline' and then use:
 #
-#READLINE_LIB= -L/sw/lib -lreadline -lhistory -lncurses
+#READLINE_LIB= -L/sw/lib -lreadline
+#READLINE_EXTRAS= -lhistory -lncurses
 #
 READLINE_INCLUDE=
 #READLINE_INCLUDE= -I/usr/gnu/include
@@ -908,18 +931,6 @@ CALC_ENV= CALCPATH=./cal LD_LIBRARY_PATH=.
 #	  MALLOC_FASTCHK=1 MALLOC_FULLWARN=1 MALLOC_CLEAR_FREE=1 \
 #	  MALLOC_CLEAR_MALLOC=1 LD_LIBRARY_PATH=.:./custom
 
-# By default, custom builtin functions may only be executed if calc
-# is given the -C option.  This is because custom builtin functions
-# may invoke non-standard or non-portable code.	 One may completely
-# disable custom builtin functions by not compiling any of code
-#
-# ALLOW_CUSTOM= -DCUSTOM	# allow custom only if -C is given
-# ALLOW_CUSTOM=			# disable custom even if -C is given
-#
-# If in doubt, use ALLOW_CUSTOM= -DCUSTOM
-#
-ALLOW_CUSTOM= -DCUSTOM
-#ALLOW_CUSTOM=
 
 # The install rule uses:
 #
@@ -950,14 +961,15 @@ EXT=
 
 # The default calc versions
 #
-VERSION= 2.12.2
-VERS= 2.12.2
+VERSION= 2.12.3.0
+VERS= 2.12.3
 VER= 2.12
 VE= 2
 
 # Names of shared libraries with versions
 #
 LIB_EXT= .so
+LIB_EXT_VERSION= ${LIB_EXT}.${VERSION}
 LIB_EXT_VERS= ${LIB_EXT}.${VERS}
 LIB_EXT_VER= ${LIB_EXT}.${VER}
 LIB_EXT_VE= ${LIB_EXT}.${VE}
@@ -995,6 +1007,7 @@ LN= ln
 LDCONFIG= ldconfig
 # assume the X11 makedepend tool for the depend rule
 MAKEDEPEND= makedepend
+STRIP= strip
 
 # Extra compiling and linking flags
 #
@@ -1084,8 +1097,8 @@ CC_SHARE= -fPIC
 DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:/usr/local/lib
 LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
     "-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
-LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERS}"
-LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERS}"
+LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
+LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
 #
 CC_STATIC=
 LD_STATIC=
@@ -1232,15 +1245,21 @@ UTIL_TMP= ll_tmp fpos_tmp fposv_tmp const_tmp uid_tmp newstr_tmp vs_tmp \
 	memmv_tmp offscl_tmp posscl_tmp newstr_tmp \
 	getsid_tmp gettime_tmp getprid_tmp rusage_tmp strdup_tmp
 
-# these utility progs may be created in the process of building BUILD_H_SRC
+# these utility executables may be created in the process of
+# building the BUILD_H_SRC file set
 #
 UTIL_PROGS= align32${EXT} fposval${EXT} have_uid_t${EXT} have_const${EXT} \
 	endian${EXT} longbits${EXT} have_newstr${EXT} have_stdvs${EXT} \
 	have_varvs${EXT} have_ustat${EXT} have_getsid${EXT} \
 	have_getpgid${EXT} have_gettime${EXT} have_getprid${EXT} \
-	ver_calc${EXT} have_strdup${EXT} no_implicit${EXT} no_implicit.arg \
+	ver_calc${EXT} have_strdup${EXT} no_implicit${EXT} \
 	have_unused${EXT} have_fpos${EXT} have_fpos_pos${EXT} \
-	have_offscl${EXT} have_rusage${EXT} have_args.sh
+	have_offscl${EXT} have_rusage${EXT}
+
+# these utility files and scripts may be created in the process of building
+# the BUILD_H_SRC file set
+#
+UTIL_FILES= no_implicit.arg have_args.sh
 
 # Any .h files that are needed to compile sample code.
 #
@@ -1336,9 +1355,6 @@ HELP_PASSDOWN= \
     COMMON_CFLAGS="${COMMON_CFLAGS}" \
     COMMON_LDFLAGS="${COMMON_LDFLAGS}" \
     CP=${CP} \
-    CUSTOMCALDIR="${CUSTOMCALDIR}" \
-    CUSTOMHELPDIR="${CUSTOMHELPDIR}" \
-    CUSTOMINCDIR="${CUSTOMINCDIR}" \
     EXT=${EXT} \
     FMT=${FMT} \
     HELPDIR="${HELPDIR}" \
@@ -1373,9 +1389,6 @@ CAL_PASSDOWN= \
     CMP=${CMP} \
     CO=${CO} \
     CP=${CP} \
-    CUSTOMCALDIR="${CUSTOMCALDIR}" \
-    CUSTOMHELPDIR="${CUSTOMHELPDIR}" \
-    CUSTOMINCDIR="${CUSTOMINCDIR}" \
     HELPDIR="${HELPDIR}" \
     INCDIR="${INCDIR}" \
     LANG=${LANG} \
@@ -1404,9 +1417,6 @@ CSCRIPT_PASSDOWN= \
     CMP=${CMP} \
     CO=${CO} \
     CP=${CP} \
-    CUSTOMCALDIR="${CUSTOMCALDIR}" \
-    CUSTOMHELPDIR="${CUSTOMHELPDIR}" \
-    CUSTOMINCDIR="${CUSTOMINCDIR}" \
     FMT=${FMT} \
     HELPDIR="${HELPDIR}" \
     INCDIR="${INCDIR}" \
@@ -1459,11 +1469,12 @@ CALC_STATIC_LIBS= libcalc.a libcustcalc.a
 
 # Libaraies created and used to build calc
 #
-CALC_DYNAMIC_LIBS= libcalc${LIB_EXT_VERS} libcustcalc${LIB_EXT_VERS}
+CALC_DYNAMIC_LIBS= libcalc${LIB_EXT_VERSION} libcustcalc${LIB_EXT_VERSION}
 
 # Symlinks of dymanic shared libraries
 #
 SYM_DYNAMIC_LIBS= libcalc${LIB_EXT_VER} libcalc${LIB_EXT_VE} libcalc${LIB_EXT} \
+	libcalc${LIB_EXT_VERS} libcustcalc${LIB_EXT_VERSION} \
 	libcustcalc${LIB_EXT_VERS} libcustcalc${LIB_EXT_VER} \
 	libcustcalc${LIB_EXT_VE} libcustcalc${LIB_EXT}
 
@@ -1472,11 +1483,11 @@ SYM_DYNAMIC_LIBS= libcalc${LIB_EXT_VER} libcalc${LIB_EXT_VE} libcalc${LIB_EXT} \
 # NOTE: The ${SAMPLE_TARGETS} and ${SAMPLE_STATIC_TARGETS} are built but
 #	not installed at this time.
 #
-# NOTE: There must be a foo-static${EXE} in SAMPLE_STATIC_TARGETS for
-#	every foo${EXE} in ${SAMPLE_TARGETS}.
+# NOTE: There must be a foo-static${EXT} in SAMPLE_STATIC_TARGETS for
+#	every foo${EXT} in ${SAMPLE_TARGETS}.
 #
-SAMPLE_TARGETS= sample_rand${EXE} sample_many${EXE}
-SAMPLE_STATIC_TARGETS= sample_rand-static${EXE} sample_many-static${EXE}
+SAMPLE_TARGETS= sample_rand${EXT} sample_many${EXT}
+SAMPLE_STATIC_TARGETS= sample_rand-static${EXT} sample_many-static${EXT}
 
 # list of cscript programs to that need to be built to satisfy cscript/.all
 #
@@ -1540,7 +1551,7 @@ calc-dynamic-only: ${DYNAMIC_FIRST_TARGETS} ${EARLY_TARGETS} \
 	${Q} for i in .static calc-static${EXT} ${SAMPLE_STATIC_TARGETS} \
 		      libcalc.a custom/libcustcalc.a; do \
 	    r="calc-dynamic-only"; \
-	    if [ -e "$$i" ]; then \
+	    if [ -r "$$i" ]; then \
 		echo "Found the static target $$i file.  You must:" 1>&2; \
 		echo "" 1>&2; \
 		echo "      ${MAKE} -f ${MAKE_FILE} clobber" 1>&2; \
@@ -1558,7 +1569,9 @@ calc-static-only: ${STATIC_FIRST_TARGETS} ${EARLY_TARGETS} \
 		  ${CALC_STATIC_LIBS} calc-static${EXT} \
 		  ${SAMPLE_STATIC_TARGETS} ${LATE_TARGETS}
 	${Q} for i in calc${EXT} ${SAMPLE_TARGETS}; do \
-	    if ! ${CMP} -s "$$i-static" "$$i"; then \
+	    if ${CMP} -s "$$i-static" "$$i"; then \
+		${TRUE}; \
+	    else \
 		${RM} -f "$$i"; \
 		${LN} "$$i-static" "$$i"; \
 	    fi; \
@@ -1582,9 +1595,9 @@ calc-static-only: ${STATIC_FIRST_TARGETS} ${EARLY_TARGETS} \
 	    exit 3; \
 	fi
 	${Q} for i in .dynamic ${CALC_DYNAMIC_LIBS} ${SYM_DYNAMIC_LIBS} \
-		      custom/libcustcalc${LIB_EXT_VERS}; do \
+		      custom/libcustcalc${LIB_EXT_VERSION}; do \
 	    r="calc-static-only"; \
-	    if [ -e "$$i" ]; then \
+	    if [ -r "$$i" ]; then \
 		echo "Found the dynamic target $$i file.  You must:" 1>&2; \
 		echo "" 1>&2; \
 		echo "      ${MAKE} -f ${MAKE_FILE} clobber" 1>&2; \
@@ -1601,20 +1614,25 @@ calc-static-only: ${STATIC_FIRST_TARGETS} ${EARLY_TARGETS} \
 calc${EXT}: .hsrc ${CALCOBJS} ${CALC_DYNAMIC_LIBS} ${MAKE_FILE}
 	${RM} -f $@
 	${CC} ${CALCOBJS} ${LDFLAGS} ${LD_SHARE} ${CALC_DYNAMIC_LIBS} \
-	      ${READLINE_LIB} -o $@
+	      ${READLINE_LIB} ${READLINE_EXTRAS} -o $@
 
-libcalc${LIB_EXT_VERS}: ${LIBOBJS} ver_calc${EXE} ${MAKE_FILE}
-	${CC} ${LIBCALC_SHLIB} ${LIBOBJS} -o libcalc${LIB_EXT_VERS}
+libcalc${LIB_EXT_VERSION}: ${LIBOBJS} ver_calc${EXT} ${MAKE_FILE}
+	${CC} ${LIBCALC_SHLIB} ${LIBOBJS} \
+	      ${READLINE_LIB} ${READLINE_EXTRAS} -o libcalc${LIB_EXT_VERSION}
 
-libcalc${LIB_EXT_VER}: libcalc${LIB_EXT_VERS}
+libcalc${LIB_EXT_VERS}: libcalc${LIB_EXT_VERSION}
 	${Q} ${RM} -f $@
 	${LN} -s $? $@
 
-libcalc${LIB_EXT_VE}: libcalc${LIB_EXT_VERS}
+libcalc${LIB_EXT_VER}: libcalc${LIB_EXT_VERSION}
 	${Q} ${RM} -f $@
 	${LN} -s $? $@
 
-libcalc${LIB_EXT}: libcalc${LIB_EXT_VERS}
+libcalc${LIB_EXT_VE}: libcalc${LIB_EXT_VERSION}
+	${Q} ${RM} -f $@
+	${LN} -s $? $@
+
+libcalc${LIB_EXT}: libcalc${LIB_EXT_VERSION}
 	${Q} ${RM} -f $@
 	${LN} -s $? $@
 
@@ -1657,13 +1675,13 @@ calc.usage: calc.1 ${MAKE_FILE}
 
 sample: ${SAMPLE_TARGETS}
 
-sample_rand${EXE}: sample_rand.o ${CALC_DYNAMIC_LIBS} ${MAKE_FILE}
+sample_rand${EXT}: sample_rand.o ${CALC_DYNAMIC_LIBS} ${MAKE_FILE}
 	${CC} sample_rand.o ${CLDFALGS} ${LD_SHARE} ${CALC_DYNAMIC_LIBS} \
-	      ${READLINE_LIB} -o $@
+	      ${READLINE_LIB} ${READLINE_EXTRAS} -o $@
 
-sample_many${EXE}: sample_many.o ${CALC_DYNAMIC_LIBS} ${MAKE_FILE}
+sample_many${EXT}: sample_many.o ${CALC_DYNAMIC_LIBS} ${MAKE_FILE}
 	${CC} sample_many.o ${CLDFALGS} ${LD_SHARE} ${CALC_DYNAMIC_LIBS} \
-	      ${READLINE_LIB} -o $@
+	      ${READLINE_LIB} ${READLINE_EXTRAS} -o $@
 
 ###
 #
@@ -1763,7 +1781,7 @@ endian_calc.h: endian${EXT} ${MAKE_FILE}
 	${Q} echo '' >> endian_calc.h
 	${Q} echo '' >> endian_calc.h
 	${Q} echo '/* what byte order are we? */' >> endian_calc.h
-	-${Q} if [ X"${BYTE_ORDER}" = X ]; then \
+	-${Q} if [ X"${CALC_BYTE_ORDER}" = X ]; then \
 	    if [ -f ${INCDIR}/endian.h ]; then \
 		echo '#include <endian.h>' >> endian_calc.h; \
 		echo '#define CALC_BYTE_ORDER BYTE_ORDER' >> endian_calc.h; \
@@ -2709,7 +2727,7 @@ have_urandom.h: ${MAKE_FILE}
 	    echo '#define HAVE_URANDOM_H	/* yes */' >> have_urandom.h; \
 	elif [ X"${HAVE_URANDOM_H}" = X"NO" ]; then \
 	    echo '#undef HAVE_URANDOM_H  /* no */' >> have_urandom.h; \
-	elif [ -e /dev/urandom ] 2>/dev/null; then \
+	elif [ -r /dev/urandom ] 2>/dev/null; then \
 	    echo '#define HAVE_URANDOM_H  /* yes */' >> have_urandom.h; \
 	else \
 	    echo '#undef HAVE_URANDOM_H	 /* no */' >> have_urandom.h; \
@@ -3008,6 +3026,7 @@ win32_hsrc: win32.mkdef ${MAKE_FILE}
 	 ${RM} -f ${UTIL_MISC_SRC}; \
 	 ${RM} -f ${UTIL_OBJS}; \
 	 ${RM} -f ${UTIL_PROGS}; \
+	 ${RM} -f ${UTIL_FILES}; \
 	 ${RM} -f ${MAKE_FILE})
 	${Q} echo 'win32 directory formed'
 
@@ -3018,7 +3037,7 @@ win32_hsrc: win32.mkdef ${MAKE_FILE}
 ###
 
 endian.o: endian.c have_unistd.h
-	${LCC} ${ICFLAGS} ${BYTE_ORDER} endian.c -c
+	${LCC} ${ICFLAGS} ${CALC_BYTE_ORDER} endian.c -c
 
 endian${EXT}: endian.o
 	${RM} -f $@
@@ -3081,26 +3100,30 @@ custom/.all: custom/Makefile
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
 	${V} echo '=-=-=-=-= ${MAKE_FILE} end of $@ rule =-=-=-=-='
 
-custom/libcustcalc${LIB_EXT_VERS}: custom/Makefile
+custom/libcustcalc${LIB_EXT_VERSION}: custom/Makefile
 	${V} echo '=-=-=-=-= ${MAKE_FILE} start of $@ rule =-=-=-=-='
 	${V} echo '=-=-=-=-= Invoking all rule for custom =-=-=-=-='
 	cd custom; ${MAKE} -f Makefile.simple ${CUSTOM_PASSDOWN} $@
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
 	${V} echo '=-=-=-=-= ${MAKE_FILE} end of $@ rule =-=-=-=-='
 
-libcustcalc${LIB_EXT_VERS}: custom/libcustcalc${LIB_EXT_VERS}
+libcustcalc${LIB_EXT_VERSION}: custom/libcustcalc${LIB_EXT_VERSION}
 	${Q} ${RM} -f $@
 	${CP} -p $? $@
 
-libcustcalc${LIB_EXT_VER}: libcustcalc${LIB_EXT_VERS}
+libcustcalc${LIB_EXT_VERS}: custom/libcustcalc${LIB_EXT_VERSION}
 	${Q} ${RM} -f $@
 	${LN} -s $? $@
 
-libcustcalc${LIB_EXT_VE}: libcustcalc${LIB_EXT_VERS}
+libcustcalc${LIB_EXT_VER}: libcustcalc${LIB_EXT_VERSION}
 	${Q} ${RM} -f $@
 	${LN} -s $? $@
 
-libcustcalc${LIB_EXT}: libcustcalc${LIB_EXT_VERS}
+libcustcalc${LIB_EXT_VE}: libcustcalc${LIB_EXT_VERSION}
+	${Q} ${RM} -f $@
+	${LN} -s $? $@
+
+libcustcalc${LIB_EXT}: libcustcalc${LIB_EXT_VERSION}
 	${Q} ${RM} -f $@
 	${LN} -s $? $@
 
@@ -3114,7 +3137,7 @@ calc-static${EXT}: .hsrc ${CALCOBJS} \
 		   ${CALC_STATIC_LIBS} ${MAKE_FILE}
 	${RM} -f $@
 	${CC} ${LDFLAGS} ${CALCOBJS} ${LD_STATIC} ${CALC_STATIC_LIBS} \
-	      ${READLINE_LIB} -o $@
+	      ${READLINE_LIB} ${READLINE_EXTRAS} -o $@
 
 libcustcalc.a: custom/libcustcalc.a
 	${Q} ${RM} -f $@
@@ -3129,13 +3152,13 @@ libcalc.a: ${LIBOBJS} ${MAKE_FILE}
 custom/libcustcalc.a: custom/Makefile
 	cd custom; ${MAKE} -f Makefile.simple ${CUSTOM_PASSDOWN} libcustcalc.a
 
-sample_rand-static${EXE}: sample_rand.o ${CALC_STATIC_LIBS} ${MAKE_FILE}
+sample_rand-static${EXT}: sample_rand.o ${CALC_STATIC_LIBS} ${MAKE_FILE}
 	${CC} ${LDFLAGS} sample_rand.o ${LD_STATIC} \
-	      ${CALC_STATIC_LIBS} ${READLINE_LIB} -o $@
+	      ${CALC_STATIC_LIBS} ${READLINE_LIB} ${READLINE_EXTRAS} -o $@
 
-sample_many-static${EXE}: sample_many.o ${CALC_STATIC_LIBS} ${MAKE_FILE}
+sample_many-static${EXT}: sample_many.o ${CALC_STATIC_LIBS} ${MAKE_FILE}
 	${CC} ${LDFLAGS} sample_many.o ${LD_STATIC} \
-	      ${CALC_STATIC_LIBS} ${READLINE_LIB} -o $@
+	      ${CALC_STATIC_LIBS} ${READLINE_LIB} ${READLINE_EXTRAS} -o $@
 
 ###
 #
@@ -3513,6 +3536,7 @@ env:
 	@echo 'PURIFY=${PURIFY}'; echo ''
 	@echo 'Q=${Q}'; echo ''
 	@echo 'RANLIB=${RANLIB}'; echo ''
+	@echo 'READLINE_EXTRAS=${READLINE_EXTRAS}'; echo ''
 	@echo 'READLINE_INCLUDE=${READLINE_INCLUDE}'; echo ''
 	@echo 'READLINE_LIB=${READLINE_LIB}'; echo ''
 	@echo 'RM=${RM}'; echo ''
@@ -3540,6 +3564,7 @@ env:
 	@echo 'UTIL_C_SRC=${UTIL_C_SRC}'; echo ''
 	@echo 'UTIL_MISC_SRC=${UTIL_MISC_SRC}'; echo ''
 	@echo 'UTIL_OBJS=${UTIL_OBJS}'; echo ''
+	@echo 'UTIL_FILES=${UTIL_FILES}'; echo ''
 	@echo 'UTIL_PROGS=${UTIL_PROGS}'; echo ''
 	@echo 'UTIL_TMP=${UTIL_TMP}'; echo ''
 	@echo 'V=${V}'; echo ''
@@ -3621,8 +3646,7 @@ gdb:
 
 rpm: clobber rpm.mk calc.spec.in
 	${V} echo '=-=-=-=-= ${MAKE_FILE} start of $@ rule =-=-=-=-='
-	${RM} -rf /var/tmp/redhat /var/tmp/calc-root
-	${MAKE} -f rpm.mk RHDIR=/var/tmp/redhat TMPDIR=/var/tmp/redhat V=${V}
+	${MAKE} -f rpm.mk V=${V}
 	${V} echo '=-=-=-=-= ${MAKE_FILE} end of $@ rule =-=-=-=-='
 
 # rpm static rules
@@ -3733,6 +3757,7 @@ clean: custom/Makefile
 	${RM} -f ${UTIL_OBJS}
 	${RM} -f ${UTIL_TMP}
 	${RM} -f ${UTIL_PROGS}
+	${RM} -f ${UTIL_FILES}
 	${RM} -f ${SAMPLE_OBJ}
 	${RM} -f .libcustcalc_error
 	${RM} -f calc.spec.sed
@@ -3772,32 +3797,35 @@ clobber: custom/Makefile clean
 	${RM} -f calc.pixie calc.rf calc.Counts calc.cord
 	${RM} -rf gen_h skel Makefile.bak tmp.patch
 	${RM} -f calc.spec inst_files rpm.mk.patch tmp
+	${RM} -f libcalc${LIB_EXT_VERSION}
 	${RM} -f libcalc${LIB_EXT_VERS}
 	${RM} -f libcalc${LIB_EXT_VER}
 	${RM} -f libcalc${LIB_EXT_VE}
 	${RM} -f libcalc*${LIB_EXT}
+	${RM} -f libcustcalc${LIB_EXT_VERSION}
 	${RM} -f libcustcalc${LIB_EXT_VERS}
 	${RM} -f libcustcalc${LIB_EXT_VER}
 	${RM} -f libcustcalc${LIB_EXT_VE}
 	${RM} -f libcustcalc*${LIB_EXT}
 	${RM} -f libcustcalc.a
-	${RM} -f calc-static${EXE}
+	${RM} -f calc-static${EXT}
 	${RM} -f ${CALC_STATIC_LIBS}
+	${RM} -f all
 	${V} echo '=-=-=-=-= Invoking $@ rule for help =-=-=-=-='
-	-cd help; ${MAKE} -f Makefile ${HELP_PASSDOWN} clobber
+	-cd help; ${RM} -f all; ${MAKE} -f Makefile ${HELP_PASSDOWN} $@
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
 	${V} echo '=-=-=-=-= Invoking $@ rule for cal =-=-=-=-='
-	-cd cal; ${MAKE} -f Makefile ${CAL_PASSDOWN} clobber
+	-cd cal; ${RM} -f all; ${MAKE} -f Makefile ${CAL_PASSDOWN} $@
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
 	${V} echo '=-=-=-=-= Invoking $@ rule for custom =-=-=-=-='
-	cd custom; ${MAKE} -f Makefile.simple ${CUSTOM_PASSDOWN} clobber
+	cd custom; ${RM} -f all; ${MAKE} -f Makefile ${CUSTOM_PASSDOWN} $@
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
 	${V} echo '=-=-=-=-= Invoking $@ rule for cscript =-=-=-=-='
-	cd cscript; ${MAKE} -f Makefile ${CSCRIPT_PASSDOWN} clobber
+	cd cscript; ${RM} -f all; ${MAKE} -f Makefile ${CSCRIPT_PASSDOWN} $@
 	${V} echo '=-=-=-=-= Back to the main Makefile for $@ rule =-=-=-=-='
 	${V} echo remove files that are obsolete
 	${RM} -rf win32 build
-	${RM} -f .static .dynamic
+	${RM} -f .static .dynamic calc-dynamic-only calc-static-only
 	${V} echo '=-=-=-=-= ${MAKE_FILE} end of $@ rule =-=-=-=-='
 
 # install everything
@@ -3927,7 +3955,7 @@ install: custom/Makefile ${LIB_H_SRC} ${BUILD_H_SRC} calc.1 all
 	    ${MV} -f ${T}${BINDIR}/calc.new${EXT} ${T}${BINDIR}/calc${EXT}; \
 	    echo "installed ${T}${BINDIR}/calc${EXT}"; \
 	fi
-	-${Q} if [ -f calc-static${EXE} ]; then \
+	-${Q} if [ -f calc-static${EXT} ]; then \
 	    if ${CMP} -s calc-static${EXT} \
 	    		 ${T}${BINDIR}/calc-static${EXT}; then \
 		${TRUE}; \
@@ -3965,43 +3993,49 @@ install: custom/Makefile ${LIB_H_SRC} ${BUILD_H_SRC} calc.1 all
 		echo "installed ${T}${LIBDIR}/libcalc.a"; \
 	   fi; \
 	fi
-	${Q}# NOTE: The this makefile installs libcustcalc${LIB_EXT_VERS}
+	${Q}# NOTE: The this makefile installs libcustcalc${LIB_EXT_VERSION}
 	${Q}#       because we only want to perform one ${LDCONFIG} for both
-	${Q}#       libcalc${LIB_EXT_VERS} and libcustcalc${LIB_EXT_VERS}.
-	-${Q} if ${CMP} -s libcalc${LIB_EXT_VERS} \
-		     ${T}${LIBDIR}/libcalc${LIB_EXT_VERS} && \
-	   ${CMP} -s custom/libcustcalc${LIB_EXT_VERS} \
-		     ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}; then \
+	${Q}#       libcalc${LIB_EXT_VERSION} and libcustcalc${LIB_EXT_VERSION}.
+	-${Q} if ${CMP} -s libcalc${LIB_EXT_VERSION} \
+		     ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION} && \
+	   ${CMP} -s custom/libcustcalc${LIB_EXT_VERSION} \
+		     ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}; then \
 	    ${TRUE}; \
 	else \
-	    ${RM} -f ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}.new; \
-	    ${CP} -f libcalc${LIB_EXT_VERS} \
-	    	     ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}.new; \
-	    ${MV} -f ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}.new \
-	    	     ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}; \
+	    ${RM} -f ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}.new; \
+	    ${CP} -f libcalc${LIB_EXT_VERSION} \
+	    	     ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}.new; \
+	    ${MV} -f ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}.new \
+	    	     ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}; \
+	    echo "installed ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}"; \
+	    ${LN} -f -s libcalc${LIB_EXT_VERSION} \
+	    		${T}${LIBDIR}/libcalc${LIB_EXT_VERS}; \
 	    echo "installed ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}"; \
-	    ${LN} -f -s libcalc${LIB_EXT_VERS} \
+	    ${LN} -f -s libcalc${LIB_EXT_VERSION} \
 	    		${T}${LIBDIR}/libcalc${LIB_EXT_VER}; \
 	    echo "installed ${T}${LIBDIR}/libcalc${LIB_EXT_VER}"; \
-	    ${LN} -f -s libcalc${LIB_EXT_VERS} \
+	    ${LN} -f -s libcalc${LIB_EXT_VERSION} \
 	    		${T}${LIBDIR}/libcalc${LIB_EXT_VE}; \
 	    echo "installed ${T}${LIBDIR}/libcalc${LIB_EXT_VE}"; \
-	    ${LN} -f -s libcalc${LIB_EXT_VERS} \
+	    ${LN} -f -s libcalc${LIB_EXT_VERSION} \
 	    		${T}${LIBDIR}/libcalc${LIB_EXT}; \
 	    echo "installed ${T}${LIBDIR}/libcalc${LIB_EXT}"; \
-	    ${RM} -f ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}.new; \
-	    ${CP} -f custom/libcustcalc${LIB_EXT_VERS} \
-	    	     ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}.new; \
-	    ${MV} -f ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}.new \
-	    	     ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}; \
+	    ${RM} -f ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}.new; \
+	    ${CP} -f custom/libcustcalc${LIB_EXT_VERSION} \
+	    	     ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}.new; \
+	    ${MV} -f ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}.new \
+	    	     ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}; \
+	    echo "installed ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}"; \
+	    ${LN} -f -s libcustcalc${LIB_EXT_VERSION} \
+	    		${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}; \
 	    echo "installed ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}"; \
-	    ${LN} -f -s libcustcalc${LIB_EXT_VERS} \
+	    ${LN} -f -s libcustcalc${LIB_EXT_VERSION} \
 	    		${T}${LIBDIR}/libcustcalc${LIB_EXT_VER}; \
 	    echo "installed ${T}${LIBDIR}/libcustcalc${LIB_EXT_VER}"; \
-	    ${LN} -f -s libcustcalc${LIB_EXT_VERS} \
+	    ${LN} -f -s libcustcalc${LIB_EXT_VERSION} \
 	    		${T}${LIBDIR}/libcustcalc${LIB_EXT_VE}; \
 	    echo "installed ${T}${LIBDIR}/libcalc${LIB_EXT_VE}"; \
-	    ${LN} -f -s libcustcalc${LIB_EXT_VERS} \
+	    ${LN} -f -s libcustcalc${LIB_EXT_VERSION} \
 	    		${T}${LIBDIR}/libcustcalc${LIB_EXT}; \
 	    echo "installed ${T}${LIBDIR}/libcalc${LIB_EXT}"; \
 	    if [ -z "${T}" -o "/" = "${T}" ]; then \
@@ -4161,12 +4195,12 @@ uninstall: custom/Makefile
 		echo "uninstalled ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}"; \
 	    fi; \
 	fi
-	-${Q} if [ -f "${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}" ]; then \
-	    ${RM} -f "${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}"; \
-	    if [ -f "${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}" ]; then \
-		echo "cannot uninstall ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}"; \
+	-${Q} if [ -f "${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}" ]; then \
+	    ${RM} -f "${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}"; \
+	    if [ -f "${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}" ]; then \
+		echo "cannot uninstall ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}"; \
 	    else \
-		echo "uninstalled ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERS}"; \
+		echo "uninstalled ${T}${LIBDIR}/libcustcalc${LIB_EXT_VERSION}"; \
 	    fi; \
 	fi
 	-${Q} if [ -f "${T}${LIBDIR}/libcalc${LIB_EXT}" ]; then \
@@ -4201,12 +4235,12 @@ uninstall: custom/Makefile
 		echo "uninstalled ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}"; \
 	    fi; \
 	fi
-	-${Q} if [ -f "${T}${LIBDIR}/libcalc${LIB_EXT_VERS}" ]; then \
-	    ${RM} -f "${T}${LIBDIR}/libcalc${LIB_EXT_VERS}"; \
-	    if [ -f "${T}${LIBDIR}/libcalc${LIB_EXT_VERS}" ]; then \
-		echo "cannot uninstall ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}"; \
+	-${Q} if [ -f "${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}" ]; then \
+	    ${RM} -f "${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}"; \
+	    if [ -f "${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}" ]; then \
+		echo "cannot uninstall ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}"; \
 	    else \
-		echo "uninstalled ${T}${LIBDIR}/libcalc${LIB_EXT_VERS}"; \
+		echo "uninstalled ${T}${LIBDIR}/libcalc${LIB_EXT_VERSION}"; \
 	    fi; \
 	fi
 	-${Q} if [ -z "${T}" -o "/" = "${T}" ]; then \
@@ -4272,6 +4306,20 @@ splint: #hsrc
 	${SPLINT} ${SPLINT_OPTS} -DCALC_SRC -I. \
 	    ${CALCSRC} ${LIBSRC} ${BUILD_C_SRC} ${UTIL_C_SRC}
 
+# strip - for reducing the size of the binary files
+#
+strip:
+	${V} echo '=-=-=-=-= ${MAKE_FILE} start of $@ rule =-=-=-=-='
+	${Q} for i in ${UTIL_PROGS} ${SAMPLE_TARGETS} ${SAMPLE_STATIC_TARGETS} \
+		 calc${EXT} calc-static${EXT} ${CALC_DYNAMIC_LIBS} \
+		 ${CALC_STATIC_LIBS}; do \
+	    if [ -s "$$i" -a -w "$$i" ]; then \
+		${STRIP} "$$i"; \
+		echo "stripped $$i"; \
+	    fi; \
+	done
+	${V} echo '=-=-=-=-= ${MAKE_FILE} end of $@ rule =-=-=-=-='
+
 ###
 #
 # make depend stuff

cal/Makefile

@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.2 $
-# @(#) $Id: Makefile,v 30.2 2007/03/22 07:34:47 chongo Exp $
+# @(#) $Revision: 30.3 $
+# @(#) $Id: Makefile,v 30.3 2007/09/21 01:27:27 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/Makefile,v $
 #
 # Under source code control:	1991/07/21 05:00:54
@@ -111,9 +111,6 @@ CALC_SHAREDIR= /usr/share/calc
 # ---------------------------------------------------------------
 # ${HELPDIR}		where the help directory is installed
 # ${CALC_INCDIR}	where the calc include files are installed
-# ${CUSTOMCALDIR}	where custom *.cal files are installed
-# ${CUSTOMHELPDIR}	where custom help files are installed
-# ${CUSTOMINCDIR}	where custom .h files are installed
 # ${SCRIPTDIR}		where calc shell scripts are installed
 #
 # NOTE: The install rule prepends installation paths with ${T}, which
@@ -124,16 +121,10 @@ CALC_SHAREDIR= /usr/share/calc
 #
 #	HELPDIR= ${CALC_SHAREDIR}/help
 #	CALC_INCDIR= ${INCDIR}/calc
-#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
-#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
-#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
 #	SCRIPTDIR= ${BINDIR}/cscript
 #
 HELPDIR= ${CALC_SHAREDIR}/help
 CALC_INCDIR= ${INCDIR}/calc
-CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
-CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
-CUSTOMINCDIR= ${CALC_INCDIR}/custom
 SCRIPTDIR= ${BINDIR}/cscript
 
 # T - top level directory under which calc will be installed

cal/regress.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: regress.cal,v 30.3 2007/07/11 22:58:26 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: regress.cal,v 30.4 2008/02/24 07:41:49 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/regress.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:36
@@ -1412,7 +1412,39 @@ define test_functions()
 	vrfy(isnum(systime()),		'1206: isnum(systime())');
 	vrfy(isnum(usertime()),		'1207: isnum(usertime())');
 
-	print '1208: Ending test_functions';
+	/* more jacobi tests */
+	vrfy(jacobi(987897,987) == 0,	'1208: jacobi(987897,987) == 0');
+	vrfy(jacobi(897,987) == 0,	'1209: jacobi(897,987) == 0');
+	vrfy(jacobi(987,897) == 0,	'1210: jacobi(987,897) == 0');
+	vrfy(jacobi(90,897) == 0,	'1211: jacobi(90,897) == 0');
+	vrfy(jacobi(45,897) == 0,	'1212: jacobi(45,897) == 0');
+	vrfy(jacobi(897,45) == 0,	'1213: jacobi(897,45) == 0');
+	vrfy(jacobi(42,45) == 0,	'1214: jacobi(42,45) == 0');
+	vrfy(jacobi(21,45) == 0,	'1215: jacobi(21,45) == 0');
+	vrfy(jacobi(45,21) == 0,	'1216: jacobi(45,21) == 0');
+	vrfy(jacobi(3,21) == 0,		'1217: jacobi(3,21) == 0');
+	vrfy(jacobi(0,21) == 0,		'1218: jacobi(0,21) == 0');
+	vrfy(jacobi(0,20003) == 0,	'1219: jacobi(0,20003) == 0');
+	vrfy(jacobi(1,20003) == 1,	'1220: jacobi(1,20003) == 1');
+	vrfy(jacobi(1236,20003) == 1,	'1221: jacobi(1236,20003) == 1');
+	vrfy(jacobi(618,20003) == -1,	'1222: jacobi(618,20003) == -1');
+	vrfy(jacobi(309,20003) == 1,	'1223: jacobi(309,20003) == 1');
+	vrfy(jacobi(227,309) == 1,	'1224: jacobi(227,309) == 1');
+	vrfy(jacobi(82,227) == 1,	'1225: jacobi(82,227) == 1');
+	vrfy(jacobi(41,227) == -1,	'1226: jacobi(41,227) == -1');
+	vrfy(jacobi(22,41) == -1,	'1227: jacobi(22,41) == -1');
+	vrfy(jacobi(11,41) == -1,	'1228: jacobi(11,41) == -1');
+	vrfy(jacobi(8,11) == -1,	'1229: jacobi(8,11) == -1');
+	vrfy(jacobi(4,11) == 1,		'1230: jacobi(4,11) == 1');
+	vrfy(jacobi(2,11) == -1,	'1231: jacobi(2,11) == -1');
+	vrfy(jacobi(1,11) == 1,		'1232: jacobi(1,11) == 1');
+	vrfy(jacobi(0,11) == 0,		'1233: jacobi(0,11) == 0');
+	vrfy(jacobi(0,0) == 0,		'1234: jacobi(0,0) == 0');
+	vrfy(jacobi(-1,0) == 0,		'1235: jacobi(-1,0) == 0');
+	vrfy(jacobi(-1,-1) == 0,	'1236: jacobi(-1,-1) == 0');
+	vrfy(jacobi(0,-1) == 0,		'1237: jacobi(0,-1) == 0');
+
+	print '1238: Ending test_functions';
 }
 print '017: parsed test_functions()';
 

calc.man

@@ -15,8 +15,8 @@
 .\" received a copy with calc; if not, write to Free Software Foundation, Inc.
 .\" 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 .\"
-.\" @(#) $Revision: 30.2 $
-.\" @(#) $Id: calc.man,v 30.2 2007/08/18 17:28:29 chongo Exp $
+.\" @(#) $Revision: 30.3 $
+.\" @(#) $Id: calc.man,v 30.3 2007/09/08 02:53:09 chongo Exp $
 .\" @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.man,v $
 .\"
 .\" Under source code control:	    1991/07/23 05:48:26
@@ -275,18 +275,14 @@ See
 .TP
 .B \-i
 Become interactive if possible.
-If
-.I calc_cmd
-args are given,
-.B calc
-by default, calc will execute them and exit.
-This flag causes
-.B calc
-to drop into interactive mode after the commands are executed.
 This flag will cause
 .B calc
 to drop into interactive mode after the
-commands are executed.
+.I calc_cmd
+arguments on the command line are evaluated.
+Without this flag,
+.B calc
+will exit after they are evaluated.
 .sp 1
 For example:
 .sp 1

calc.spec.in

@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.4 $
-# @(#) $Id: calc.spec.in,v 30.4 2007/09/02 05:38:34 chongo Exp $
+# @(#) $Revision: 30.6 $
+# @(#) $Id: calc.spec.in,v 30.6 2007/10/16 12:22:22 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.spec.in,v $
 #
 # Under source code control:	2003/02/16 20:21:39
@@ -37,10 +37,10 @@
 Summary: Arbitrary precision calculator.
 Name: calc
 Version: <<<PROJECT_VERSION>>>
-Release: 1.0
+Release: 1.1
 License: LGPL
 Group: Applications/Engineering
-Source: %{name}-%{version}.tar.gz
+Source: %{name}-%{version}.tar.bz2
 URL: http://www.isthe.com/chongo/tech/comp/calc/index.html
 Requires: ncurses >= 5.2-26, readline >= 4.2, less >= 358
 BuildRequires: ncurses-devel >= 5.2-26, readline-devel >= 4.2
@@ -86,7 +86,7 @@ echo '-=- calc.spec beginning make clobber (again) -=-'
 make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 EXT= V=@ clobber
 echo '-=- calc.spec ending make clobber (again) -=-'
 echo '-=- calc.spec beginning make calc-dynamic-only -=-'
-make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 EXT= V=@ calc-dynamic-only BLD_TYPE=calc-dynamic-only
+make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 EXT= V=@ calc-dynamic-only BLD_TYPE=calc-dynamic-only LD_SHARE=
 echo '-=- calc.spec ending make calc-dynamic-only -=-'
 echo '-=- calc.spec beginning make chk -=-'
 make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 EXT= V=@ chk

config.h

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: config.h,v 30.1 2007/03/16 11:09:46 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: config.h,v 30.2 2007/09/21 01:27:27 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/config.h,v $
  *
  * Under source code control:	1995/11/01 22:20:17
@@ -193,7 +193,8 @@ typedef struct config CONFIG;
 #define CALCDBG_TTY	    (0x00000010)    /* report TTY state changes */
 #define CALCDBG_RUNSTATE    (0x00000020)    /* report run_state changes */
 #define CALCDBG_RAND	    (0x00000040)    /* report rand() activity */
-#define CALCDBG_MASK	    (0x0000007f)
+#define CALCDBG_CUSTOM	    (0x00000080)    /* custom function debug */
+#define CALCDBG_MASK	    (0x000000ff)
 
 /*
  * ctrl-d meanings

cscript/Makefile

@@ -17,8 +17,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.2 $
-# @(#) $Id: Makefile,v 30.2 2007/03/22 07:34:47 chongo Exp $
+# @(#) $Revision: 30.3 $
+# @(#) $Id: Makefile,v 30.3 2007/09/21 01:27:27 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/Makefile,v $
 #
 # Under source code control:	1999/11/29 11:10:26
@@ -111,9 +111,6 @@ CALC_SHAREDIR= /usr/share/calc
 # ---------------------------------------------------------------
 # ${HELPDIR}		where the help directory is installed
 # ${CALC_INCDIR}	where the calc include files are installed
-# ${CUSTOMCALDIR}	where custom *.cal files are installed
-# ${CUSTOMHELPDIR}	where custom help files are installed
-# ${CUSTOMINCDIR}	where custom .h files are installed
 # ${SCRIPTDIR}		where calc shell scripts are installed
 #
 # NOTE: The install rule prepends installation paths with ${T}, which
@@ -124,16 +121,10 @@ CALC_SHAREDIR= /usr/share/calc
 #
 #	HELPDIR= ${CALC_SHAREDIR}/help
 #	CALC_INCDIR= ${INCDIR}/calc
-#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
-#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
-#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
 #	SCRIPTDIR= ${BINDIR}/cscript
 #
 HELPDIR= ${CALC_SHAREDIR}/help
 CALC_INCDIR= ${INCDIR}/calc
-CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
-CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
-CUSTOMINCDIR= ${CALC_INCDIR}/custom
 SCRIPTDIR= ${BINDIR}/cscript
 
 # T - top level directory under which calc will be installed

custom.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: custom.c,v 30.1 2007/03/16 11:09:46 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: custom.c,v 30.2 2007/09/21 01:27:27 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/custom.c,v $
  *
  * Under source code control:	1997/03/03 04:53:08
@@ -100,6 +100,12 @@ custom(char *name, int count, VALUE **vals)
 	fprintf(stderr,
 	    "%sCalc was built with custom functions disabled\n",
 	    (conf->tab_ok ? "\t" : ""));
+	if (conf->calc_debug & CALCDBG_CUSTOM) {
+		fprintf(stderr,
+		    "%scustom function %s with %d args, %s vals not executed\n",
+		    (conf->tab_ok ? "\t" : ""), name, count,
+		    (vals == NULL) ? "NULL" : "non-NULL");
+	}
 	return error_value(E_NO_CUSTOM);
 
 #endif /* CUSTOM */
@@ -211,6 +217,11 @@ customhelp(char *name)
 	fprintf(stderr,
 	    "%sCalc was built with custom functions disabled\n",
 	    (conf->tab_ok ? "\t" : ""));
+	if (conf->calc_debug & CALCDBG_CUSTOM) {
+	    fprintf(stderr, "%scustom help for %s unavailable\n",
+		(conf->tab_ok ? "\t" : ""),
+		((name == NULL) ? "((NULL))" : name));
+	}
 
 #endif /* CUSTOM */
 }

custom/HOW_TO_ADD

@@ -363,6 +363,25 @@ Step 5: Write your custom function
 		very_tiny_variable = z1tol(z_num);
 	}
 
+    You can (and should) add debugging statements to your custom code
+    by examining bit 8 of the calc_debug config flag:
+
+	if (conf->calc_debug & CALCDBG_CUSTOM) {
+	    fprintf(stderr, "%ssome custom debug note: msg\n",
+		(conf->tab_ok ? "\t" : ""),
+		((msg == NULL) ? "((NULL))" : msg));
+	}
+
+    One is able to set bit 8 by way of the calc command line:
+
+    	calc -D 128
+
+    See the calc man page for details.  One may also set that bit
+    while running calc by way of the config() builtin function:
+
+    	config("calc_debug", 128);
+
+    See the help/config file for details on calc_debug.
 
 Step 6: Register the function in the custom interface table
 
@@ -642,8 +661,8 @@ Step 12: Contribute
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 30.3 $
-## @(#) $Id: HOW_TO_ADD,v 30.3 2007/07/13 23:45:54 chongo Exp $
+## @(#) $Revision: 30.4 $
+## @(#) $Id: HOW_TO_ADD,v 30.4 2007/09/21 01:27:27 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/HOW_TO_ADD,v $
 ##
 ## Under source code control:	1997/03/10 03:03:21

custom/Makefile

@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.12 $
-# @(#) $Id: Makefile.head,v 30.12 2007/09/01 19:54:03 chongo Exp $
+# @(#) $Revision: 30.16 $
+# @(#) $Id: Makefile.head,v 30.16 2008/02/24 07:58:36 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/Makefile.head,v $
 #
 # Under source code control:	1997/03/09 02:28:54
@@ -63,14 +63,16 @@ CUSTOM_CALC_FILES= argv.cal halflen.cal pzasusb8.cal pmodm127.cal register.cal
 #
 CUSTOM_HELP= argv devnull help sysinfo pzasusb8 pmodm127 register
 
-# Any .h files that are needed by programs that use libcustcalc${LIB_EXT_VERS}
+# Any .h files that are needed by programs that use
+# libcustcalc${LIB_EXT_VERSION}
 #
 # Put any .h files that you add which might be useful to other
 # programs here.
 #
 CUSTOM_H_SRC=
 
-# Any .c files that are needed to build libcustcalc${LIB_EXT_VERS}.
+# Any .c files that are needed to build libcustcalc${LIB_EXT_VERSION}.
+#
 # Don't put ${REQUIRED_SRC} files in this list.
 #
 # There MUST be a .c in CUSTOM_SRC for every .o in CUSTOM_OBJ.
@@ -80,7 +82,9 @@ CUSTOM_H_SRC=
 CUSTOM_SRC= c_argv.c c_devnull.c c_help.c c_sysinfo.c c_pzasusb8.c \
 	c_pmodm127.c c_register.c
 
-# Any .o files that are needed by program that use libcustcalc${LIB_EXT_VERS}.
+# Any .o files that are needed by program that use
+# libcustcalc${LIB_EXT_VERSION}.
+#
 # Don't put ${REQUIRED_OBJ} files in this list.
 #
 # There MUST be a .c in CUSTOM_SRC for every .o in CUSTOM_OBJ.
@@ -362,14 +366,15 @@ EXT=
 
 # The default calc versions
 #
-VERSION= 2.12.2
-VERS= 2.12.2
+VERSION= 2.12.3.0
+VERS= 2.12.3
 VER= 2.12
 VE= 2
 
 # Names of shared libraries with versions
 #
 LIB_EXT= .so
+LIB_EXT_VERSION= ${LIB_EXT}.${VERSION}
 LIB_EXT_VERS= ${LIB_EXT}.${VERS}
 LIB_EXT_VER= ${LIB_EXT}.${VER}
 LIB_EXT_VE= ${LIB_EXT}.${VE}
@@ -518,8 +523,12 @@ CC_SHARE= -fPIC
 DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:/usr/local/lib
 LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
     "-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
-LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERS}"
-LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERS}"
+LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
+ifdef ALLOW_CUSTOM
+LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
+else
+LIBCUSTCALC_SHLIB=
+endif
 #
 CC_STATIC=
 LD_STATIC=
@@ -545,10 +554,14 @@ ifeq ($(target),Darwin)
 BLD_TYPE= calc-dynamic-only
 #
 CC_SHARE= -fPIC
-DEFAULT_LIB_INSTALL_PATH= ${PWD}:/sw/lib:/usr/lib:${LIBDIR}:/usr/local/lib
+DEFAULT_LIB_INSTALL_PATH= ${PWD}:${LIBDIR}:/usr/local/lib
 LD_SHARE= ${DARWIN_ARCH}
 LIBCALC_SHLIB= -single_module -undefined dynamic_lookup -dynamiclib
+ifdef ALLOW_CUSTOM
 LIBCUSTCALC_SHLIB= -single_module -undefined dynamic_lookup -dynamiclib
+else
+LIBCUSTCALC_SHLIB=
+endif
 #
 CC_STATIC=
 LD_STATIC= ${DARWIN_ARCH}
@@ -565,11 +578,14 @@ CC= ${PURIFY} ${LCC} ${CCWERR}
 #
 # Darmin dynamic shared lib filenames
 LIB_EXT:= .dylib
+LIB_EXT_VERSION:= .${VERSION}${LIB_EXT}
 LIB_EXT_VERS:= .${VERS}${LIB_EXT}
 LIB_EXT_VER:= .${VER}${LIB_EXT}
 LIB_EXT_VE:= .${VE}${LIB_EXT}
-# compile Universal by default
-DARWIN_ARCH= -arch i386 -arch ppc
+# DARWIN_ARCH= -arch i386 -arch ppc	# Universal binary
+# DARWIN_ARCH= -arch i386		# Intel binary
+# DARWIN_ARCH= -arch ppc		# PPC binary
+DARWIN_ARCH=				# native binary
 MACOSX_DEPLOYMENT_TARGET=10.4
 #
 endif
@@ -592,8 +608,12 @@ CC_SHARE= -fPIC
 DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:/usr/local/lib
 LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
     "-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
-LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERS}"
-LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERS}"
+LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
+ifdef ALLOW_CUSTOM
+LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
+else
+LIBCUSTCALC_SHLIB=
+endif
 #
 CC_STATIC=
 LD_STATIC=
@@ -612,6 +632,83 @@ MAKE= gmake
 #
 endif
 
+##################
+# OpenBSD target #
+##################
+
+########################################################################
+# NOTE: You MUST either use gmake (GNU Make) or you must try your luck #
+#       with Makefile.simple and custom/Makefile.simple versions.      #
+#	See HOWTO.INSTALL for more information.                        #
+########################################################################
+
+ifeq ($(target),OpenBSD)
+#
+BLD_TYPE= calc-dynamic-only
+#
+CC_SHARE= -fPIC
+DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:/usr/local/lib
+LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
+    "-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
+LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
+ifdef ALLOW_CUSTOM
+LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
+else
+LIBCUSTCALC_SHLIB=
+endif
+#
+CC_STATIC=
+LD_STATIC=
+LIBCALC_STATIC=
+LIBCUSTCALC_STATIC=
+#
+CCWARN= -Wall
+CCWERR=
+CCOPT= ${DEBUG}
+CCMISC=
+#
+LCC= gcc
+CC= ${PURIFY} ${LCC} ${CCWERR}
+#
+MAKE= gmake
+#
+endif
+
+################
+# SunOS target #
+################
+
+# XXX - this needs to be tested
+ifeq ($(target),SunOS)
+#
+BLD_TYPE= calc-dynamic-only
+#
+CC_SHARE= -fPIC
+DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:/usr/local/lib
+LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
+    "-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
+LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
+ifdef ALLOW_CUSTOM
+LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
+else
+LIBCUSTCALC_SHLIB=
+endif
+#
+CC_STATIC=
+LIBCALC_STATIC=
+LIBCUSTCALC_STATIC=
+LD_STATIC=
+#
+CCWARN= -Wall -W -Wno-comment
+CCWERR=
+CCOPT= ${DEBUG}
+CCMISC=
+#
+LCC= gcc
+CC= ${PURIFY} ${LCC} ${CCWERR}
+#
+endif
+
 #######################################################
 # simple target - values used to form Makefile.simple #
 #######################################################
@@ -628,8 +725,8 @@ CC_SHARE= -fPIC
 DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:/usr/local/lib
 LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
     "-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
-LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERS}"
-LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERS}"
+LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
+LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
 #
 CC_STATIC=
 LD_STATIC=
@@ -675,8 +772,12 @@ CC_SHARE= -fPIC
 DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:/usr/local/lib
 LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
     "-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
-LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERS}"
-LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERS}"
+LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
+ifdef ALLOW_CUSTOM
+LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
+else
+LIBCUSTCALC_SHLIB=
+endif
 #
 CC_STATIC=
 LIBCALC_STATIC=
@@ -718,7 +819,6 @@ CFLAGS= ${ICFLAGS} ${CCOPT}
 #
 ILDFLAGS= ${COMMON_LDFLAGS}
 LDFLAGS= ${LD_DEBUG} ${ILDFLAGS}
-
 #endif	/* end of skip for non-Gnu makefiles */
 
 #######################################################################
@@ -730,14 +830,14 @@ LDFLAGS= ${LD_DEBUG} ${ILDFLAGS}
 ##############################################################################
 
 # These .c files are required for the main custom interface and
-# for the custom support functions for libcustcalc${LIB_EXT_VERS}.
+# for the custom support functions for libcustcalc${LIB_EXT_VERSION}.
 #
 # There MUST be a .c for every .o in REQUIRED_OBJ.
 #
 REQUIRED_SRC= custtbl.c
 
 # These .o files correspond to the .c files in REQUIRED_SRC
-# for libcustcalc${LIB_EXT_VERS}.
+# for libcustcalc${LIB_EXT_VERSION}.
 #
 # There MUST be a .o for every .c in REQUIRED_SRC.
 #
@@ -747,11 +847,11 @@ REQUIRED_OBJ= custtbl.o
 #
 INSTALL_H_SRC= ${CUSTOM_H_SRC}
 
-# These .c files are used to form libcustcalc${LIB_EXT_VERS}.
+# These .c files are used to form libcustcalc${LIB_EXT_VERSION}.
 #
 CUSTCALC_SRC= ${REQUIRED_SRC} ${CUSTOM_SRC}
 
-# These .o files are used to form libcustcalc${LIB_EXT_VERS}.
+# These .o files are used to form libcustcalc${LIB_EXT_VERSION}.
 #
 CUSTCALC_OBJ= ${REQUIRED_OBJ} ${CUSTOM_OBJ}
 
@@ -778,7 +878,7 @@ CALCLIBLIST= ${CUSTCALC_SRC} ${INSTALL_H_SRC} ${MAKE_FILE} HOW_TO_ADD
 
 # This is the custom dynbamic shared library that is build
 #
-CALC_DYNAMIC_LIBCUSTCALC= libcustcalc${LIB_EXT_VERS}
+CALC_DYNAMIC_LIBCUSTCALC= libcustcalc${LIB_EXT_VERSION}
 
 # This is the custom static library that is build
 #
@@ -801,10 +901,10 @@ calc-dynamic-only: ${CUSTCALC_OBJ} ${CALC_DYNAMIC_LIBCUSTCALC}
 
 calc-static-only: ${CUSTCALC_OBJ} ${CALC_STATIC_LIBCUSTCALC}
 
-custom/libcustcalc${LIB_EXT_VERS}: libcustcalc${LIB_EXT_VERS} \
+custom/libcustcalc${LIB_EXT_VERSION}: libcustcalc${LIB_EXT_VERSION} \
 	${CALC_STATIC_LIBCUSTCALC}
 
-libcustcalc${LIB_EXT_VERS}: ${CUSTCALC_OBJ} ${MAKE_FILE}
+libcustcalc${LIB_EXT_VERSION}: ${CUSTCALC_OBJ} ${MAKE_FILE}
 	${CC} ${LIBCUSTCALC_SHLIB} ${CUSTCALC_OBJ} -o $@
 
 ##
@@ -1014,6 +1114,7 @@ clean:
 clobber: clean
 	${RM} -f ${BLD_TYPE}
 	${RM} -f .all ${MAKE_FILE}.tmp ${MAKE_FILE}.bak
+	${RM} -f libcustcalc${LIB_EXT_VERSION}
 	${RM} -f libcustcalc${LIB_EXT_VERS}
 	${RM} -f libcustcalc${LIB_EXT_VER}
 	${RM} -f libcustcalc${LIB_EXT_VE}
@@ -1173,9 +1274,10 @@ install: all
 	    fi; \
 	  fi; \
 	fi
-	${Q}# NOTE: The upper level makefile installs libcustcalc${LIB_EXT_VERS}
-	${Q}#       because we only want to perform one ${LDCONFIG} for both
-	${Q}#       libcalc${LIB_EXT_VERS} and libcustcalc${LIB_EXT_VERS}.
+	${Q}# NOTE: The upper level makefile installs the file
+	${Q}#	    libcustcalc${LIB_EXT_VERSION} because we only want to
+	${Q}#	    perform one ${LDCONFIG} for both libcalc${LIB_EXT_VERSION}
+	${Q}#	    and libcustcalc${LIB_EXT_VERSION}.
 
 # Try to remove everything that was installed
 #

custom/Makefile.head

@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.12 $
-# @(#) $Id: Makefile.head,v 30.12 2007/09/01 19:54:03 chongo Exp $
+# @(#) $Revision: 30.16 $
+# @(#) $Id: Makefile.head,v 30.16 2008/02/24 07:58:36 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/Makefile.head,v $
 #
 # Under source code control:	1997/03/09 02:28:54
@@ -63,14 +63,16 @@ CUSTOM_CALC_FILES= argv.cal halflen.cal pzasusb8.cal pmodm127.cal register.cal
 #
 CUSTOM_HELP= argv devnull help sysinfo pzasusb8 pmodm127 register
 
-# Any .h files that are needed by programs that use libcustcalc${LIB_EXT_VERS}
+# Any .h files that are needed by programs that use
+# libcustcalc${LIB_EXT_VERSION}
 #
 # Put any .h files that you add which might be useful to other
 # programs here.
 #
 CUSTOM_H_SRC=
 
-# Any .c files that are needed to build libcustcalc${LIB_EXT_VERS}.
+# Any .c files that are needed to build libcustcalc${LIB_EXT_VERSION}.
+#
 # Don't put ${REQUIRED_SRC} files in this list.
 #
 # There MUST be a .c in CUSTOM_SRC for every .o in CUSTOM_OBJ.
@@ -80,7 +82,9 @@ CUSTOM_H_SRC=
 CUSTOM_SRC= c_argv.c c_devnull.c c_help.c c_sysinfo.c c_pzasusb8.c \
 	c_pmodm127.c c_register.c
 
-# Any .o files that are needed by program that use libcustcalc${LIB_EXT_VERS}.
+# Any .o files that are needed by program that use
+# libcustcalc${LIB_EXT_VERSION}.
+#
 # Don't put ${REQUIRED_OBJ} files in this list.
 #
 # There MUST be a .c in CUSTOM_SRC for every .o in CUSTOM_OBJ.
@@ -362,14 +366,15 @@ EXT=
 
 # The default calc versions
 #
-VERSION= 2.12.2
-VERS= 2.12.2
+VERSION= 2.12.3.0
+VERS= 2.12.3
 VER= 2.12
 VE= 2
 
 # Names of shared libraries with versions
 #
 LIB_EXT= .so
+LIB_EXT_VERSION= ${LIB_EXT}.${VERSION}
 LIB_EXT_VERS= ${LIB_EXT}.${VERS}
 LIB_EXT_VER= ${LIB_EXT}.${VER}
 LIB_EXT_VE= ${LIB_EXT}.${VE}

custom/Makefile.simple

@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.12 $
-# @(#) $Id: Makefile.head,v 30.12 2007/09/01 19:54:03 chongo Exp $
+# @(#) $Revision: 30.16 $
+# @(#) $Id: Makefile.head,v 30.16 2008/02/24 07:58:36 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/Makefile.head,v $
 #
 # Under source code control:	1997/03/09 02:28:54
@@ -48,14 +48,16 @@ CUSTOM_CALC_FILES= argv.cal halflen.cal pzasusb8.cal pmodm127.cal register.cal
 #
 CUSTOM_HELP= argv devnull help sysinfo pzasusb8 pmodm127 register
 
-# Any .h files that are needed by programs that use libcustcalc${LIB_EXT_VERS}
+# Any .h files that are needed by programs that use
+# libcustcalc${LIB_EXT_VERSION}
 #
 # Put any .h files that you add which might be useful to other
 # programs here.
 #
 CUSTOM_H_SRC=
 
-# Any .c files that are needed to build libcustcalc${LIB_EXT_VERS}.
+# Any .c files that are needed to build libcustcalc${LIB_EXT_VERSION}.
+#
 # Don't put ${REQUIRED_SRC} files in this list.
 #
 # There MUST be a .c in CUSTOM_SRC for every .o in CUSTOM_OBJ.
@@ -65,7 +67,9 @@ CUSTOM_H_SRC=
 CUSTOM_SRC= c_argv.c c_devnull.c c_help.c c_sysinfo.c c_pzasusb8.c \
 	c_pmodm127.c c_register.c
 
-# Any .o files that are needed by program that use libcustcalc${LIB_EXT_VERS}.
+# Any .o files that are needed by program that use
+# libcustcalc${LIB_EXT_VERSION}.
+#
 # Don't put ${REQUIRED_OBJ} files in this list.
 #
 # There MUST be a .c in CUSTOM_SRC for every .o in CUSTOM_OBJ.
@@ -347,14 +351,15 @@ EXT=
 
 # The default calc versions
 #
-VERSION= 2.12.2
-VERS= 2.12.2
+VERSION= 2.12.3.0
+VERS= 2.12.3
 VER= 2.12
 VE= 2
 
 # Names of shared libraries with versions
 #
 LIB_EXT= .so
+LIB_EXT_VERSION= ${LIB_EXT}.${VERSION}
 LIB_EXT_VERS= ${LIB_EXT}.${VERS}
 LIB_EXT_VER= ${LIB_EXT}.${VER}
 LIB_EXT_VE= ${LIB_EXT}.${VE}
@@ -472,8 +477,8 @@ CC_SHARE= -fPIC
 DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:/usr/local/lib
 LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
     "-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
-LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERS}"
-LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERS}"
+LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
+LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
 #
 CC_STATIC=
 LD_STATIC=
@@ -511,14 +516,14 @@ LDFLAGS= ${LD_DEBUG} ${ILDFLAGS} ${LIBCALC_STATIC} ${LIBCUSTCALC_STATIC}
 ##############################################################################
 
 # These .c files are required for the main custom interface and
-# for the custom support functions for libcustcalc${LIB_EXT_VERS}.
+# for the custom support functions for libcustcalc${LIB_EXT_VERSION}.
 #
 # There MUST be a .c for every .o in REQUIRED_OBJ.
 #
 REQUIRED_SRC= custtbl.c
 
 # These .o files correspond to the .c files in REQUIRED_SRC
-# for libcustcalc${LIB_EXT_VERS}.
+# for libcustcalc${LIB_EXT_VERSION}.
 #
 # There MUST be a .o for every .c in REQUIRED_SRC.
 #
@@ -528,11 +533,11 @@ REQUIRED_OBJ= custtbl.o
 #
 INSTALL_H_SRC= ${CUSTOM_H_SRC}
 
-# These .c files are used to form libcustcalc${LIB_EXT_VERS}.
+# These .c files are used to form libcustcalc${LIB_EXT_VERSION}.
 #
 CUSTCALC_SRC= ${REQUIRED_SRC} ${CUSTOM_SRC}
 
-# These .o files are used to form libcustcalc${LIB_EXT_VERS}.
+# These .o files are used to form libcustcalc${LIB_EXT_VERSION}.
 #
 CUSTCALC_OBJ= ${REQUIRED_OBJ} ${CUSTOM_OBJ}
 
@@ -559,7 +564,7 @@ CALCLIBLIST= ${CUSTCALC_SRC} ${INSTALL_H_SRC} ${MAKE_FILE} HOW_TO_ADD
 
 # This is the custom dynbamic shared library that is build
 #
-CALC_DYNAMIC_LIBCUSTCALC= libcustcalc${LIB_EXT_VERS}
+CALC_DYNAMIC_LIBCUSTCALC= libcustcalc${LIB_EXT_VERSION}
 
 # This is the custom static library that is build
 #
@@ -582,10 +587,10 @@ calc-dynamic-only: ${CUSTCALC_OBJ} ${CALC_DYNAMIC_LIBCUSTCALC}
 
 calc-static-only: ${CUSTCALC_OBJ} ${CALC_STATIC_LIBCUSTCALC}
 
-custom/libcustcalc${LIB_EXT_VERS}: libcustcalc${LIB_EXT_VERS} \
+custom/libcustcalc${LIB_EXT_VERSION}: libcustcalc${LIB_EXT_VERSION} \
 	${CALC_STATIC_LIBCUSTCALC}
 
-libcustcalc${LIB_EXT_VERS}: ${CUSTCALC_OBJ} ${MAKE_FILE}
+libcustcalc${LIB_EXT_VERSION}: ${CUSTCALC_OBJ} ${MAKE_FILE}
 	${CC} ${LIBCUSTCALC_SHLIB} ${CUSTCALC_OBJ} -o $@
 
 ##
@@ -783,6 +788,7 @@ clean:
 clobber: clean
 	${RM} -f ${BLD_TYPE}
 	${RM} -f .all ${MAKE_FILE}.tmp ${MAKE_FILE}.bak
+	${RM} -f libcustcalc${LIB_EXT_VERSION}
 	${RM} -f libcustcalc${LIB_EXT_VERS}
 	${RM} -f libcustcalc${LIB_EXT_VER}
 	${RM} -f libcustcalc${LIB_EXT_VE}
@@ -939,9 +945,10 @@ install: all
 	    fi; \
 	  fi; \
 	fi
-	${Q}# NOTE: The upper level makefile installs libcustcalc${LIB_EXT_VERS}
-	${Q}#       because we only want to perform one ${LDCONFIG} for both
-	${Q}#       libcalc${LIB_EXT_VERS} and libcustcalc${LIB_EXT_VERS}.
+	${Q}# NOTE: The upper level makefile installs the file
+	${Q}#	    libcustcalc${LIB_EXT_VERSION} because we only want to
+	${Q}#	    perform one ${LDCONFIG} for both libcalc${LIB_EXT_VERSION}
+	${Q}#	    and libcustcalc${LIB_EXT_VERSION}.
 
 # Try to remove everything that was installed
 #

custom/Makefile.tail

@@ -3,14 +3,14 @@
 ##############################################################################
 
 # These .c files are required for the main custom interface and
-# for the custom support functions for libcustcalc${LIB_EXT_VERS}.
+# for the custom support functions for libcustcalc${LIB_EXT_VERSION}.
 #
 # There MUST be a .c for every .o in REQUIRED_OBJ.
 #
 REQUIRED_SRC= custtbl.c
 
 # These .o files correspond to the .c files in REQUIRED_SRC
-# for libcustcalc${LIB_EXT_VERS}.
+# for libcustcalc${LIB_EXT_VERSION}.
 #
 # There MUST be a .o for every .c in REQUIRED_SRC.
 #
@@ -20,11 +20,11 @@ REQUIRED_OBJ= custtbl.o
 #
 INSTALL_H_SRC= ${CUSTOM_H_SRC}
 
-# These .c files are used to form libcustcalc${LIB_EXT_VERS}.
+# These .c files are used to form libcustcalc${LIB_EXT_VERSION}.
 #
 CUSTCALC_SRC= ${REQUIRED_SRC} ${CUSTOM_SRC}
 
-# These .o files are used to form libcustcalc${LIB_EXT_VERS}.
+# These .o files are used to form libcustcalc${LIB_EXT_VERSION}.
 #
 CUSTCALC_OBJ= ${REQUIRED_OBJ} ${CUSTOM_OBJ}
 
@@ -51,7 +51,7 @@ CALCLIBLIST= ${CUSTCALC_SRC} ${INSTALL_H_SRC} ${MAKE_FILE} HOW_TO_ADD
 
 # This is the custom dynbamic shared library that is build
 #
-CALC_DYNAMIC_LIBCUSTCALC= libcustcalc${LIB_EXT_VERS}
+CALC_DYNAMIC_LIBCUSTCALC= libcustcalc${LIB_EXT_VERSION}
 
 # This is the custom static library that is build
 #
@@ -74,10 +74,10 @@ calc-dynamic-only: ${CUSTCALC_OBJ} ${CALC_DYNAMIC_LIBCUSTCALC}
 
 calc-static-only: ${CUSTCALC_OBJ} ${CALC_STATIC_LIBCUSTCALC}
 
-custom/libcustcalc${LIB_EXT_VERS}: libcustcalc${LIB_EXT_VERS} \
+custom/libcustcalc${LIB_EXT_VERSION}: libcustcalc${LIB_EXT_VERSION} \
 	${CALC_STATIC_LIBCUSTCALC}
 
-libcustcalc${LIB_EXT_VERS}: ${CUSTCALC_OBJ} ${MAKE_FILE}
+libcustcalc${LIB_EXT_VERSION}: ${CUSTCALC_OBJ} ${MAKE_FILE}
 	${CC} ${LIBCUSTCALC_SHLIB} ${CUSTCALC_OBJ} -o $@
 
 ##
@@ -287,6 +287,7 @@ clean:
 clobber: clean
 	${RM} -f ${BLD_TYPE}
 	${RM} -f .all ${MAKE_FILE}.tmp ${MAKE_FILE}.bak
+	${RM} -f libcustcalc${LIB_EXT_VERSION}
 	${RM} -f libcustcalc${LIB_EXT_VERS}
 	${RM} -f libcustcalc${LIB_EXT_VER}
 	${RM} -f libcustcalc${LIB_EXT_VE}
@@ -446,9 +447,10 @@ install: all
 	    fi; \
 	  fi; \
 	fi
-	${Q}# NOTE: The upper level makefile installs libcustcalc${LIB_EXT_VERS}
-	${Q}#       because we only want to perform one ${LDCONFIG} for both
-	${Q}#       libcalc${LIB_EXT_VERS} and libcustcalc${LIB_EXT_VERS}.
+	${Q}# NOTE: The upper level makefile installs the file
+	${Q}#	    libcustcalc${LIB_EXT_VERSION} because we only want to
+	${Q}#	    perform one ${LDCONFIG} for both libcalc${LIB_EXT_VERSION}
+	${Q}#	    and libcustcalc${LIB_EXT_VERSION}.
 
 # Try to remove everything that was installed
 #

endian.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: endian.c,v 30.1 2007/03/16 11:09:46 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: endian.c,v 30.2 2007/09/29 16:56:40 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/endian.c,v $
  *
  * Under source code control:	1993/11/15 04:32:58
@@ -53,10 +53,8 @@ char byte[8] = { (char)0x12, (char)0x36, (char)0x48, (char)0x59,
 int
 main(void)
 {
-#if !defined(LITTLE_ENDIAN) && !defined(BIG_ENDIAN)
 	/* pointers into the byte order array */
 	int *intp = (int *)byte;
-#endif
 #if defined(DEBUG)
 	short *shortp = (short *)byte;
 	long *longp = (long *)byte;
@@ -73,13 +71,16 @@ main(void)
 #endif
 
 	/* Print the standard <machine/endian.h> defines */
+	printf("#undef BIG_ENDIAN\n");
 	printf("#define BIG_ENDIAN\t4321\n");
+	printf("#undef LITTLE_ENDIAN\n");
 	printf("#define LITTLE_ENDIAN\t1234\n");
+	printf("#undef CALC_BYTE_ORDER\n");
 
-#if defined(LITTLE_ENDIAN)
-	printf("#define CALC_BYTE_ORDER\tLITTLE_ENDIAN\n");
-#elif defined(BIG_ENDIAN)
+#if defined(CALC_BIG_ENDIAN)
 	printf("#define CALC_BYTE_ORDER\tBIG_ENDIAN\n");
+#elif defined(CALC_LITTLE_ENDIAN)
+	printf("#define CALC_BYTE_ORDER\tLITTLW_ENDIAN\n");
 #else
 	/* Determine byte order */
 	if (intp[0] == 0x12364859) {
@@ -89,8 +90,11 @@ main(void)
 	    /* Least Significant Byte first */
 	    printf("#define CALC_BYTE_ORDER\tLITTLE_ENDIAN\n");
 	} else {
-	    fprintf(stderr,
-		"Unknown int Byte Order, set CALC_BYTE_ORDER in Makefile\n");
+	    fprintf(stderr, "@=-=@ Fatal build error - cannot @=-=@\n");
+	    fprintf(stderr, "@=-=@ determine byte order.  Set @=-=@\n");
+	    fprintf(stderr, "@=-=@ ${CALC_BYTE_ORDER} in the Makefile @=-=@\n");
+	    fprintf(stderr, "@=-=@ to be either -DCALC_BIG_ENDIAN or @=-=@\n");
+	    fprintf(stderr, "@=-=@ to be -DCALC_LITTLE_ENDIAN @=-=@\n");
 	    exit(1);
 	}
 #endif

fposval.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: fposval.c,v 30.1 2007/03/16 11:09:46 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: fposval.c,v 30.2 2007/09/19 22:34:22 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/fposval.c,v $
  *
  * Under source code control:	1994/11/05 03:19:52
@@ -129,7 +129,7 @@ main(int argc, char **argv)
 	 * systems a FILEPOS is not a scalar hince we must memcpy.
 	 */
 	printf("#define SWAP_HALF_IN_FILEPOS(dest, src)\t%s\n",
-	    "memcpy((void *)(dest), (void *)(src), sizeof(FPOS_POS_BITS))");
+	    "memcpy((void *)(dest), (void *)(src), sizeof(FPOS_POS_LEN))");
 #endif /* HAVE_FILEPOS_SCALAR */
 #endif /* CALC_BYTE_ORDER == BIG_ENDIAN */
 	putchar('\n');

have_fpos_pos.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: have_fpos_pos.c,v 30.1 2007/03/16 11:09:46 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: have_fpos_pos.c,v 30.2 2007/09/19 22:34:22 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/have_fpos_pos.c,v $
  *
  * Under source code control:	2000/12/17 01:23
@@ -51,17 +51,21 @@ main(void)
 	printf("#define HAVE_FPOS_POS 1  /* yes */\n\n");
 
 	/* determine __pos element size */
-	printf("#undef FPOS_POS_BITS\t/* no */\n");
+	printf("#undef FPOS_POS_BITS\n");
+	printf("#undef FPOS_POS_LEN\n");
 # if defined(FPOS_POS_BITS)
-	printf("#define FPOS_POS_BITS %d\n\n", FPOS_POS_BITS);
+	printf("#define FPOS_POS_BITS %d\n", FPOS_POS_BITS);
+	printf("#define FPOS_POS_LEN %d\n", int(FPOS_POS_BITS/8));
 # else
-	printf("#define FPOS_POS_BITS %d\n\n", sizeof(pos.__pos)*8);
+	printf("#define FPOS_POS_BITS %d\n", sizeof(pos.__pos)*8);
+	printf("#define FPOS_POS_LEN %d\n", sizeof(pos.__pos));
 # endif
 
 #else
 	/* we have no __pos element */
 	printf("#undef HAVE_FPOS_POS\t/* no */\n");
 	printf("#undef FPOS_POS_BITS\n");
+	printf("#undef FPOS_POS_LEN\n");
 #endif
 	/* exit(0); */
 	return 0;

help.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: help.c,v 30.1 2007/03/16 11:09:46 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: help.c,v 30.2 2007/09/21 01:27:27 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/help.c,v $
  *
  * Under source code control:	1997/09/14 10:58:30
@@ -249,11 +249,15 @@ givehelp(char *type)
 	/*
 	 * open the helpfile (looking in HELPDIR first)
 	 */
+#if defined(CUSTOM)
 	if (sizeof(CUSTOMHELPDIR) > sizeof(HELPDIR)) {
 		helppath = (char *)malloc(sizeof(CUSTOMHELPDIR)+1+strlen(type));
 	} else {
 		helppath = (char *)malloc(sizeof(HELPDIR)+1+strlen(type));
 	}
+#else /* CUSTOM */
+	helppath = (char *)malloc(sizeof(HELPDIR)+1+strlen(type));
+#endif /* CUSTOM */
 	if (helppath == NULL) {
 		fprintf(stderr, "malloc failure in givehelp()\n");
 		return;
@@ -268,6 +272,7 @@ givehelp(char *type)
 		page_file(stream);
 		(void) fclose(stream);
 
+#if defined(CUSTOM)
 	/*
 	 * open the the helpfile (looking in CUSTOMHELPDIR last)
 	 */
@@ -287,6 +292,7 @@ givehelp(char *type)
 			page_file(stream);
 			(void) fclose(stream);
 		}
+#endif /* CUSTOM */
 	}
 
 	/*

help/Makefile

@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 30.4 $
-# @(#) $Id: Makefile,v 30.4 2007/09/02 05:49:56 chongo Exp $
+# @(#) $Revision: 30.5 $
+# @(#) $Id: Makefile,v 30.5 2007/09/21 01:27:27 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/help/RCS/Makefile,v $
 #
 # Under source code control:	1991/07/23 06:47:57
@@ -111,9 +111,6 @@ CALC_SHAREDIR= /usr/share/calc
 # ---------------------------------------------------------------
 # ${HELPDIR}		where the help directory is installed
 # ${CALC_INCDIR}	where the calc include files are installed
-# ${CUSTOMCALDIR}	where custom *.cal files are installed
-# ${CUSTOMHELPDIR}	where custom help files are installed
-# ${CUSTOMINCPDIR}	where custom .h files are installed
 # ${SCRIPTDIR}		where calc shell scripts are installed
 #
 # NOTE: The install rule prepends installation paths with ${T}, which
@@ -124,16 +121,10 @@ CALC_SHAREDIR= /usr/share/calc
 #
 #	HELPDIR= ${CALC_SHAREDIR}/help
 #	CALC_INCDIR= ${INCDIR}/calc
-#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
-#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
-#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
 #	SCRIPTDIR= ${BINDIR}/cscript
 #
 HELPDIR= ${CALC_SHAREDIR}/help
 CALC_INCDIR= ${INCDIR}/calc
-CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
-CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
-CUSTOMINCDIR= ${CALC_INCDIR}/custom
 SCRIPTDIR= ${BINDIR}/cscript
 
 # T - top level directory under which calc will be installed

help/config

@@ -600,7 +600,9 @@ DESCRIPTION
 
 	6	Report on rand() subtractive 100 shuffle generator issues.
 
-    Bits >= 7 are reserved for future use and should not be used at this time.
+	7	Report on custom function issues.
+
+    Bits >= 8 are reserved for future use and should not be used at this time.
 
     By default, "calc_debug" is 0.  The initial value may be overridden
     by the -D command line option.
@@ -972,8 +974,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 30.2 $
-## @(#) $Id: config,v 30.2 2007/07/05 17:37:41 chongo Exp $
+## @(#) $Revision: 30.3 $
+## @(#) $Id: config,v 30.3 2007/09/21 01:27:27 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/config,v $
 ##
 ## Under source code control:	1991/07/21 04:37:17

help/rand

@@ -2,18 +2,21 @@ NAME
     rand - subtractive 100 shuffle pseudo-random number generator
 
 SYNOPSIS
-    rand([[min, ] max])
+    rand([[min, ] beyond])
 
 TYPES
     min		integer
-    max		integer
+    beyond	integer
 
     return	integer
 
 DESCRIPTION
     Generate a pseudo-random number using an subtractive 100 shuffle generator.
-    We return a pseudo-random number over the half closed interval [min,max).
-    By default, min is 0 and max is 2^64.
+    We return a pseudo-random number over the half closed interval:
+
+    	[min,beyond)	((min <= return < beyond))
+
+    By default, min is 0 and beyond is 2^64.
 
     The shuffle method is fast and serves as a fairly good standard
     pseudo-random generator.   If you need a fast generator and do not
@@ -26,7 +29,7 @@ DESCRIPTION
     Other arg forms:
 
 	rand()		Same as rand(0, 2^64)
-	rand(max)	Same as rand(0, max)
+	rand(beyond)	Same as rand(0, beyond)
 
     The rand generator generates the highest order bit first.  Thus:
 
@@ -230,17 +233,17 @@ EXAMPLE
     2 658186291252503497642116 1 -324097
 
 LIMITS
-    min < max
+    min < beyond
 
 LINK LIBRARY
     void zrand(long cnt, ZVALUE *res)
-    void zrandrange(ZVALUE low, ZVALUE high, ZVALUE *res)
-    long irand(long max)
+    void zrandrange(ZVALUE low, ZVALUE beyond, ZVALUE *res)
+    long irand(long beyond)
 
 SEE ALSO
     seed, srand, randbit, isrand, random, srandom, israndom
 
-## Copyright (C) 1999  Landon Curt Noll
+## Copyright (C) 1999-2007  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -256,8 +259,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 30.1 $
-## @(#) $Id: rand,v 30.1 2007/03/16 11:10:42 chongo Exp $
+## @(#) $Revision: 30.3 $
+## @(#) $Id: rand,v 30.3 2007/09/21 02:16:29 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/rand,v $
 ##
 ## Under source code control:	1996/01/01 02:16:09

help/random

@@ -2,18 +2,21 @@ NAME
     random - Blum-Blum-Shub pseudo-random number generator
 
 SYNOPSIS
-    random([[min, ] max])
+    random([[min, ] beyond])
 
 TYPES
     min		integer
-    max		integer
+    beyond	integer
 
     return	integer
 
 DESCRIPTION
     Generate a pseudo-random number using a Blum-Blum-Shub generator.
-    We return a pseudo-random number over the half closed interval [min,max).
-    By default, min is 0 and max is 2^64.
+    We return a pseudo-random number over the half closed interval:
+
+    	[min,beyond)	((min <= return < beyond))
+
+    By default, min is 0 and beyond is 2^64.
 
     While the Blum-Blum-Shub generator is not painfully slow, it is not
     a fast generator.  For a faster, but lesser quality generator
@@ -22,8 +25,8 @@ DESCRIPTION
 
     Other arg forms:
 
-	random()	Same as rand(0, 2^64)
-	random(max)	Same as rand(0, max)
+	random()	Same as random(0, 2^64)
+	random(beyond)	Same as random(0, beyond)
 
     The random generator generates the highest order bit first.	 Thus:
 
@@ -146,17 +149,17 @@ EXAMPLE
     10 483381144668580304003305 0 -70235
 
 LIMITS
-    min < max
+    min < beyond
 
 LINK LIBRARY
     void zrandom(long cnt, ZVALUE *res)
-    void zrandomrange(ZVALUE low, ZVALUE high, ZVALUE *res)
-    long irandom(long max)
+    void zrandomrange(ZVALUE low, ZVALUE beyond, ZVALUE *res)
+    long irandom(long beyond)
 
 SEE ALSO
     seed, srand, randbit, isrand, rand, srandom, israndom
 
-## Copyright (C) 1999  Landon Curt Noll
+## Copyright (C) 1999-2007  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -172,8 +175,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 30.1 $
-## @(#) $Id: random,v 30.1 2007/03/16 11:10:42 chongo Exp $
+## @(#) $Revision: 30.3 $
+## @(#) $Id: random,v 30.3 2007/09/21 02:16:29 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/random,v $
 ##
 ## Under source code control:	1997/02/17 01:18:22

help/todo

@@ -51,6 +51,12 @@ Very High priority items:
 
     * Consider using GNU autoconf / configure to build calc.
 
+    * It is overkill to have nearly everything wind up in libcalc.
+      Form a libcalcmath and a libcalclang so that an application
+      that just wants to link with the calc math libs can use them
+      without dragging in all of the other calc language, I/O,
+      and builtin functions.
+
     * Fix any 'Known bugs' as noted in the BUGS file or as
       displayed by 'calc help bugs'.
 
@@ -102,8 +108,6 @@ Medium priority items:
 	at by 'fizbin' and the HALF array pointer at by 'data' should be
 	treated as read-only.
 
-    * It is overkill to have nearly everything wind up in libcalc.a.
-
       One should make available a the fundamental math operations
       on ZVALUE, NUMBER and perhaps COMPLEX (without all of the
       other stuff) in a separate library.
@@ -113,7 +117,7 @@ Medium priority items:
     * Add a builtin function to access the 64 bit FNV hash which
       is currently being used internally in seed.c.
 
-## Copyright (C) 1999-2006  Landon Curt Noll
+## Copyright (C) 1999-2007  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -129,8 +133,8 @@ Medium priority items:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 30.1 $
-## @(#) $Id: todo,v 30.1 2007/03/16 11:10:42 chongo Exp $
+## @(#) $Revision: 30.2 $
+## @(#) $Id: todo,v 30.2 2007/09/08 02:52:42 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/todo,v $
 ##
 ## Under source code control:	1999/10/20 07:42:55

help/unexpected

@@ -4,6 +4,10 @@ Unexpected
     surprises in calc syntax and usage.	 Persons familiar with C should
     review this file.
 
+    Persons familiar with shell scripting may want to review this file
+    as well, particularly notes dealing with command line evaluation
+    and execution.
+
 
     The Comma
     =========
@@ -75,7 +79,7 @@ Unexpected
 
     	(-1) ^ 0.5 == 1i
 
-    because the above expresssion in parsed as:
+    because the above expression in parsed as:
 
 	-(1 ^ 0.5) == -1
 
@@ -335,7 +339,66 @@ Unexpected
     NOTE: See "help statement", "help todo", and "help bugs".
 
 
-## Copyright (C) 1999-2006  Landon Curt Noll
+    Shell evaluation of command line arguments
+    ==========================================
+
+    In most interactive shells:
+
+    	calc 2 * 3
+
+    will frequently produce a "Missing operator" error because the '*' is
+    evaluated as a "shell glob".  To avoid this you must quote or escape
+    argument with characters that your interactive shell interprets.
+
+    For example, bash / ksh / sh shell users should use:
+
+    	calc '2 * 3'
+
+    or:
+
+    	calc 2 \* 3
+
+    or some other form of shell meta-character escaping.
+
+
+    Calc reads standard input after processing command line args
+    ============================================================
+
+    The shell command:
+
+	seq 5 | while read i; do calc "($i+3)^2"; done
+
+	FYI: The command "seq 5" will write 1 through 5 on separate
+	     lines on standard output, while read i sets $i to
+	     the value of each line that is read from stdin.
+
+    will produce:
+
+        16
+	2
+	3
+	4
+	5
+
+    The reason why the last 4 lines of output are 2 through 5 is
+    that after calc evaluates the first line and prints (1+3)^2
+    (i.e., 16), calc continues to read stdin and slurps up all
+    of the remaining data on the pipe.
+
+    To avoid this problem, use:
+
+    	seq 5 | while read i; do calc "($i+3)^2" </dev/null; done
+
+    which produces the expected results:
+
+	16
+	25
+	36
+	49
+	64
+
+
+## Copyright (C) 1999-2007  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -351,8 +414,8 @@ Unexpected
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 30.2 $
-## @(#) $Id: unexpected,v 30.2 2007/07/11 23:00:39 chongo Exp $
+## @(#) $Revision: 30.3 $
+## @(#) $Id: unexpected,v 30.3 2007/09/08 02:48:45 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/unexpected,v $
 ##
 ## Under source code control:	1997/03/21 13:15:18

rpm.mk

@@ -19,8 +19,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-MAKEFILE_REV= $$Revision: 30.2 $$
-# @(#) $Id: rpm.mk,v 30.2 2007/09/02 05:38:34 chongo Exp chongo $
+MAKEFILE_REV= $$Revision: 30.4 $$
+# @(#) $Id: rpm.mk,v 30.4 2007/10/16 12:22:22 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/rpm.mk,v $
 #
 # Under source code control:	2003/02/16 20:21:39
@@ -43,7 +43,7 @@ MD5SUM= md5sum
 SHA1SUM= sha1sum
 SED= sed
 FIND= find
-GZIP_PROG= gzip
+BZIP2_PROG= bzip2
 TAR= tar
 RM= rm
 LS= ls
@@ -61,7 +61,7 @@ PROJECT_VERSION=
 PROJECT_RELEASE=
 PROJECT= $(PROJECT_NAME)-$(PROJECT_VERSION)
 SPECFILE= $(PROJECT_NAME).spec
-TARBALL= $(PROJECT).${TAR}.gz
+TARBALL= $(PROJECT).${TAR}.bz2
 RPM686= $(PROJECT)-$(PROJECT_RELEASE).${TARCH}.rpm
 DRPM686= $(PROJECT_NAME)-devel-$(PROJECT_VERSION)-$(PROJECT_RELEASE).${TARCH}.rpm
 SRPM= $(PROJECT)-$(PROJECT_RELEASE).src.rpm
@@ -88,7 +88,7 @@ all: calc.spec ver_calc
 				  calc.spec.in`" rpm
 	${V} echo '=-=-=-=-= rpm.mk end of $@ rule =-=-=-=-='
 
-pkgme: $(PROJECT_NAME)-spec.${TAR}.gz
+pkgme: $(PROJECT_NAME)-spec.${TAR}.bz2
 
 ver_calc:
 	${V} echo '=-=-=-=-= rpm.mk start of $@ rule =-=-=-=-='
@@ -112,12 +112,12 @@ calc.spec: calc.spec.in ver_calc
 srcpkg: make_rhdir
 	${V} echo '=-=-=-=-= rpm.mk start of $@ rule =-=-=-=-='
 	${FIND} . -depth -print | \
-	    ${EGREP} -v '/RCS|/CVS|/NOTES|/\.|\.out$$|\.safe$$' | \
-	    ${EGREP} -v '/old[._-]|\.old$$|\.tar\.gz$$' | \
+	    ${EGREP} -v '/RCS|/CVS|/NOTES|/\.|\.out$$|\.safe$$\.tar\.bz2$$' | \
+	    ${EGREP} -v '/old[._-]|\.old$$|\.tar\.gz$$|/ver_calc$$' | \
 	    LANG=C ${SORT} | \
 	    ${CPIO} -dumpv "$(TMPDIR)/$(PROJECT)"
 	(cd "$(TMPDIR)"; ${TAR} cf - "$(PROJECT)") | \
-	  ${GZIP_PROG} -c > "$(RPMDIR)/SOURCES/$(TARBALL)"
+	  ${BZIP2_PROG} --best -c -z > "$(RPMDIR)/SOURCES/$(TARBALL)"
 	${RM} -fr "$(TMPDIR)/$(PROJECT)"
 	${V} echo '=-=-=-=-= rpm.mk end of $@ rule =-=-=-=-='
 
@@ -228,10 +228,10 @@ uninstallrpm:
 	${RPM_TOOL} -e "$(PROJECT_NAME)"
 	${V} echo '=-=-=-=-= rpm.mk end of $@ rule =-=-=-=-='
 
-$(PROJECT_NAME)-spec.${TAR}.gz: rpm.mk $(PROJECT_NAME).spec.in
+$(PROJECT_NAME)-spec.${TAR}.bz2: rpm.mk $(PROJECT_NAME).spec.in
 	${V} echo '=-=-=-=-= rpm.mk start of $@ rule =-=-=-=-='
 	${RM} -f "$@"
-	${TAR} cf - "$^" | ${GZIP_PROG} -c > "$@"
+	${TAR} cf - "$^" | ${BZIP2_PROG} --best -c -z > "$@"
 	${V} echo '=-=-=-=-= rpm.mk end of $@ rule =-=-=-=-='
 
 #****

version.c

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.3 $
- * @(#) $Id: version.c,v 30.3 2007/07/15 02:09:35 chongo Exp $
+ * @(#) $Revision: 30.6 $
+ * @(#) $Id: version.c,v 30.6 2008/02/24 07:58:36 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/version.c,v $
  *
  * Under source code control:	1990/05/22 11:00:58
@@ -48,8 +48,8 @@ static char *program;
 
 #define MAJOR_VER	2	/* major library version */
 #define MINOR_VER	12	/* minor library version */
-#define MAJOR_PATCH	2	/* major software level under library version */
-#define MINOR_PATCH	0	/* minor software level or 0 if none */
+#define MAJOR_PATCH	3	/* major software level under library version */
+#define MINOR_PATCH	0	/* minor software level or 0 if not patched */
 
 
 /*
@@ -103,8 +103,6 @@ char *Copyright = "\n"
  * string does not contain the title, just:
  *
  *		x.y.z.w
- *		x.y.z
- *		x.y
  */
 char *
 version(void)
@@ -121,15 +119,9 @@ version(void)
 	/*
 	 * form the version buffer
 	 */
-	if (MINOR_PATCH > 0) {
-		snprintf(verbuf, BUFSIZ,
-		    "%d.%d.%d.%d", calc_major_ver, calc_minor_ver,
-		     calc_major_patch, calc_minor_patch);
-	} else {
-		snprintf(verbuf, BUFSIZ,
-		    "%d.%d.%d", calc_major_ver,
-		    calc_minor_ver, calc_major_patch);
-	}
+	snprintf(verbuf, BUFSIZ,
+	    "%d.%d.%d.%d", calc_major_ver, calc_minor_ver,
+	     calc_major_patch, calc_minor_patch);
 
 	/*
 	 * save the versions string into a newly malloced buffer

win32/endian_calc.h

@@ -8,9 +8,8 @@
 
 
 /* what byte order are we? */
-#define BIG_ENDIAN	4321
-#define LITTLE_ENDIAN	1234
-#define CALC_BYTE_ORDER	LITTLE_ENDIAN
+#include <endian.h>
+#define CALC_BYTE_ORDER BYTE_ORDER
 
 
 #endif /* !__ENDIAN_CALC_H__ */

win32/have_fpos_pos.h

@@ -10,6 +10,7 @@
 /* do we have fgetpos & fsetpos functions? */
 #undef HAVE_FPOS_POS	/* no */
 #undef FPOS_POS_BITS
+#undef FPOS_POS_LEN
 
 
 #endif /* !__HAVE_FPOS_POS_H__ */

zfunc.c

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: zfunc.c,v 30.1 2007/03/16 11:09:46 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: zfunc.c,v 30.2 2008/02/24 07:41:49 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/zfunc.c,v $
  *
  * Under source code control:	1990/02/15 01:48:27
@@ -374,12 +374,28 @@ zcomb(ZVALUE z1, ZVALUE z2, ZVALUE *res)
 
 
 /*
- * Compute the Jacobi function (p / q) for odd q.
- * If q is prime then the result is:
- *	1 if p == x^2 (mod q) for some x.
- *	-1 otherwise.
- * If q is not prime, then the result is not meaningful if it is 1.
- * This function returns 0 if q is even or q < 0.
+ * Compute the Jacobi function (m / n) for odd n.
+ *
+ * The property of the Jacobi function is: If n>2 is prime then
+ *
+ *	the result is 1 if m == x^2 (mod n) for some x.
+ *	otherwise the result is -1.
+ *
+ * If n is not prime, then the result does not prove that n is not prine
+ * when the value of the Jacobi is 1.
+ *
+ * Jacobi evaluation of (m / n), where n > 0 is odd AND m > 0 is odd:
+ *
+ *	rule 0:	(0 / n) == 0
+ *	rule 1:	(1 / n) == 1
+ *	rule 2:	(m / n) == (a / n)	if m == a % n
+ *	rule 3:	(m / n) == (2*m / n)	if n == 1 % 8 OR n == 7 % 8
+ *	rule 4:	(m / n) == -(2*m / n)	if n != 1 & 8 AND n != 7 % 8
+ *	rule 5:	(m / n) == (n / m)	if m == 3 % 4 AND n == 3 % 4
+ *	rule 6:	(m / n) == -(n / m)	if m != 3 % 4 OR n != 3 % 4
+ *
+ * NOTE: This function returns 0 in invalid Jacobi parameters:
+ *	 m < 0 OR n is even OR n < 1.
  */
 FLAG
 zjacobi(ZVALUE z1, ZVALUE z2)
@@ -388,16 +404,16 @@ zjacobi(ZVALUE z1, ZVALUE z2)
 	long lowbit;
 	int val;
 
+	/* firewall */
+	if (ziszero(z1) || zisneg(z1))
+		return 0;
 	if (ziseven(z2) || zisneg(z2))
 		return 0;
+
+	/* assume a value of 1 unless we find otherwise */
+	if (zisone(z1))
+		return 1;
 	val = 1;
-	if (ziszero(z1) || zisone(z1))
-		return val;
-	if (zisunit(z1)) {
-		if ((*z2.v - 1) & 0x2)
-			val = -val;
-		return val;
-	}
 	zcopy(z1, &p);
 	zcopy(z2, &q);
 	for (;;) {
@@ -406,7 +422,8 @@ zjacobi(ZVALUE z1, ZVALUE z2)
 		p = tmp;
 		if (ziszero(p)) {
 			zfree(p);
-			p = _one_;
+			zfree(q);
+			return 0;
 		}
 		if (ziseven(p)) {
 			lowbit = zlowbit(p);

zrand.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: zrand.c,v 30.1 2007/03/16 11:09:46 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: zrand.c,v 30.2 2007/09/21 01:47:34 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/zrand.c,v $
  *
  * Under source code control:	1995/01/07 09:45:25
@@ -123,7 +123,7 @@
  *
  * The s100 generator as the following calc interfaces:
  *
- *   rand(min,max)		(where min < max)
+ *   rand(min,beyond)		(where min < beyond)
  *
  *	Print an s100 generator random value over interval [a,b).
  *
@@ -2171,17 +2171,17 @@ zrand(long cnt, ZVALUE *res)
 
 
 /*
- * zrandrange - generate an s100 random value in the range [low, high)
+ * zrandrange - generate an s100 random value in the range [low, beyond)
  *
  * given:
  *	low - low value of range
- *	high - beyond end of range
+ *	beyond - beyond end of range
  *	res - where to place the random bits as ZVALUE
  */
 void
-zrandrange(CONST ZVALUE low, CONST ZVALUE high, ZVALUE *res)
+zrandrange(CONST ZVALUE low, CONST ZVALUE beyond, ZVALUE *res)
 {
-	ZVALUE range;		/* high-low */
+	ZVALUE range;		/* beyond-low */
 	ZVALUE rval;		/* random value [0, 2^bitlen) */
 	ZVALUE rangem1;		/* range - 1 */
 	long bitlen;		/* smallest power of 2 >= diff */
@@ -2189,15 +2189,15 @@ zrandrange(CONST ZVALUE low, CONST ZVALUE high, ZVALUE *res)
 	/*
 	 * firewall
 	 */
-	if (zrel(low, high) >= 0) {
-		math_error("srand low range >= high range");
+	if (zrel(low, beyond) >= 0) {
+		math_error("srand low range >= beyond range");
 		/*NOTREACHED*/
 	}
 
 	/*
 	 * determine the size of the random number needed
 	 */
-	zsub(high, low, &range);
+	zsub(beyond, low, &range);
 	if (zisone(range)) {
 		zfree(range);
 		*res = low;
@@ -2226,7 +2226,7 @@ zrandrange(CONST ZVALUE low, CONST ZVALUE high, ZVALUE *res)
 
 	/*
 	 * add in low value to produce the range [0+low, diff+low)
-	 * which is the range [low, high)
+	 * which is the range [low, beyond)
 	 */
 	zadd(rval, low, res);
 	zfree(rval);

zrandom.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 30.1 $
- * @(#) $Id: zrandom.c,v 30.1 2007/03/16 11:09:46 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: zrandom.c,v 30.2 2007/09/21 01:47:34 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/zrandom.c,v $
  *
  * Under source code control:	1997/02/15 04:01:56
@@ -133,9 +133,9 @@
  *
  * The Blum generator as the following calc interfaces:
  *
- *   random(min, max)		(where min < max)
+ *   random(min, beyond)		(where min < beyond)
  *
- *	Print a Blum generator random value over interval [min,max).
+ *	Print a Blum generator random value over interval [min,beyond).
  *
  *   random()
  *
@@ -2904,17 +2904,17 @@ zrandom(long cnt, ZVALUE *res)
 
 
 /*
- * zrandomrange - generate a Blum-Blum-Shub random value in [low, high)
+ * zrandomrange - generate a Blum-Blum-Shub random value in [low, beyond)
  *
  * given:
  *	low - low value of range
- *	high - beyond end of range
+ *	beyond - beyond end of range
  *	res - where to place the random bits as ZVALUE
  */
 void
-zrandomrange(CONST ZVALUE low, CONST ZVALUE high, ZVALUE *res)
+zrandomrange(CONST ZVALUE low, CONST ZVALUE beyond, ZVALUE *res)
 {
-	ZVALUE range;		/* high-low */
+	ZVALUE range;		/* beyond-low */
 	ZVALUE rval;		/* random value [0, 2^bitlen) */
 	ZVALUE rangem1;		/* range - 1 */
 	long bitlen;		/* smallest power of 2 >= diff */
@@ -2922,15 +2922,15 @@ zrandomrange(CONST ZVALUE low, CONST ZVALUE high, ZVALUE *res)
 	/*
 	 * firewall
 	 */
-	if (zrel(low, high) >= 0) {
-		math_error("srand low range >= high range");
+	if (zrel(low, beyond) >= 0) {
+		math_error("srand low range >= beyond range");
 		/*NOTREACHED*/
 	}
 
 	/*
 	 * determine the size of the random number needed
 	 */
-	zsub(high, low, &range);
+	zsub(beyond, low, &range);
 	if (zisone(range)) {
 		zfree_random(range);
 		zcopy(low, res);
@@ -2959,7 +2959,7 @@ zrandomrange(CONST ZVALUE low, CONST ZVALUE high, ZVALUE *res)
 
 	/*
 	 * add in low value to produce the range [0+low, diff+low)
-	 * which is the range [low, high)
+	 * which is the range [low, beyond)
 	 */
 	zadd(rval, low, res);
 	zfree_random(rval);