Release calc version 2.11.5.8

BUGS

@@ -29,13 +29,20 @@ The calc web site is located at:
 =-=
 
 If you have tried all of the above and things still are not right,
-then it may be time to send in a bug report.  You can send bug reports to:
+then it may be time to send in a bug report.  You can send bug
+and bug fixes reports to:
 
     calc-bugs at asthe dot com
 
     [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
     [[ NOTE: The EMail address uses 'asthe', the web site URL uses 'isthe' ]]
 
+Your subject must contain the words:
+
+       calc bug report
+
+You may have additional words in your subject line.
+
 When you send your report, please include the following information:
 
     * a description of the problem
@@ -54,18 +61,8 @@ When you send your report, please include the following information:
 
 Stack traces from core dumps are useful to send as well.
 
-=-=
-
-Send any comments, compiler warning messages, suggestions and most
-importantly, fixes (in the form of a context diff patch) to:
-
-    calc-bugs at asthe dot com
-
-    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-    [[ NOTE: The EMail address uses 'asthe', the web site URL uses 'isthe' ]]
-
-You should use the above calc-bugs address for bug reports, if you are
-not currently a member of the calc-tester mailing list.
+Fell free to use the above address to send in big fixes (in the form
+of a context diff patch).
 
 =-=
 
@@ -75,10 +72,55 @@ Known bugs:
     us know!  See the above for details on how to report and were to
     EMail your bug reports and hopefully patches to fix them.
 
-=-=
-
 Problems with known work-a-rounds:
 
+    * The gcc as shipped with Redhat 7 perhaps other Linux distributions
+      has a bug causes calc to dump core on startup when calc is:
+
+	  compiled optimized (-O, -O1, -O2 or -O3)
+
+	  	AND
+
+      	  compiled with debugging (-g or -g3)
+
+	  	AND
+
+	  when calc is compiled with readline (see USE_READLINE,
+	    READLINE_LIB and READLINE_INCLUDE in the Makefile)
+
+      On Redhat, the gcc -v which has this problem is:
+
+	gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-85)
+
+      there may be other gcc versions that also suffer this fate.
+
+      The readlines associated with problem are:
+
+	readline-4.1-5
+	readline2.2.1-2.2.1-2
+	readline-devel-4.1-5
+
+      One work-a-round is to compile calc WITHOUT readline.  In the
+      Makefile be sure that:
+
+	USE_READLINE=
+	READLINE_LIB=
+	READLINE_INCLUDE=
+
+      i.e., these Makefile vars are empty.
+
+      If you must use readline, then an alternate work-a-round is to
+      change the DEBUG Makefile variable to either:
+
+	compile for speed:  -O3		(or -O2 if you do not have -O3)
+	compile to debug:   -g3		(or -g if you do not have -g3)
+
+      but not both.
+
+      See RH bug #57889 for details:
+
+	http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=57889
+
     * There is a bug in gcc-2.95 that causes calc, when compiled with -O2,
       to fail the regression test.  The work-a-round is to compile with -O
       or to use gcc-2.96 or later.
@@ -246,8 +288,8 @@ Problems with known work-a-rounds:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.10 $
-## @(#) $Id: BUGS,v 29.10 2001/04/08 11:32:52 chongo Exp $
+## @(#) $Revision: 29.17 $
+## @(#) $Id: BUGS,v 29.17 2001/12/31 22:12:35 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/BUGS,v $
 ##
 ## Under source code control:	1994/03/18 14:06:13

CHANGES

@@ -1,4 +1,208 @@
-The following are the changes from calc version 2.11.5t2 to date:
+The following are the changes from calc version 2.11.5.5 to date:
+
+    Now using version numbers of one of these forms:
+
+    	x.y.z.w
+    	x.y.z
+    	x.y
+
+    Changed the READLINE_LIB Makefile variable to not link with -lreadline
+    by default.  If you do have readline, we recommend that you use it.
+    If you can install the GNU readline:
+
+	http://freshmeat.net/projects/gnureadline/
+    	http://cnswww.cns.cwru.edu/php/chet/readline/rltop.html
+
+    we recommend it.  But if not, you should set the USE_READLINE,
+    READLINE_LIB, and READLINE_INCLUDE Makefile variables to empty.
+    NOTE: See the BUGS file for a Linux issue when compiling calc
+    with -O (or -O2 or -O3) AND with -g (or -g3) AND with readline.
+
+    Removed an obsolete reference to TOPDIR.  This was fixed thanks to
+    a bug report by Clifford Kite <kite_public1 at ev1 dot net>.
+    Fixed other inconsistencies related to things like BINDIR.
+
+    Fixed calc man page so that is refers to -f instead of the old -S flag.
+    Fixed thanks to Clifford Kite <kite_public1 at ev1 dot net> for
+    point this out.
+
+    All for loops end with /dev/null to avoid any problems related
+    to systems that cannot grok empty for loops.
+
+    Changed the libcalc functions creal and cimag to c_real and c_imag
+    to about conflicts with new libc such as those used by gcc v3.
+    Thanks Eli Zaretskii <eliz at is dot elta dot co dot il> and
+    Martin Buck <m at rtin-buck dot de> for alerting us to this conflict.
+
+    The Makefile no longer hard code's /usr/include.  Instead it uses
+    the ${INCDIR} Makefile variable.  Thanks goes to Eli Zaretskii
+    <eliz at is dot elta dot co dot il> for pointing out this inconsistency.
+
+    Added mods to support compilation under DJGPP.  DJGPP runs on 386
+    and newer PCs running DOS or dos-compatible operating systems.
+    See http://www.delorie.com/djgpp/.  Thanks goes to Eli Zaretskii
+    <eliz at is dot elta dot co dot il> for sending in these mods.
+
+    Updated README.WINDOWS to include information on building with DJGPP.
+
+    The pld folks are building RPMs based on our calc distrbutions.
+    See:  ftp://ftp.pld.org.pl/dists/ra/PLD/i686/PLD/RPMS or
+    http://ftp.pld.org.pl/dists/ra/PLD/i686/PLD/RPMS more information.
+    We appreciate their work in this regard.  In the next release, we
+    plan to also build and release our own RPMs based on their efforts.
+
+    Changed the Makefile variable CUSTOMLIBDIR to CUSTOMCALDIR.
+    Changed the Makefile variable CSHAREDIR to CALC_SHAREDIR.
+    Changed the Makefile variable INCDIRCALC to CALC_INCDIR.
+    Removed the Makefile variable SHAREDIR.
+
+    Updated the HOWTO.INSTALL and README.WINDOWS files.
+
+The following are the changes from calc version 2.11.5t4.1 to 2.11.5t4.4:
+
+    Updated dependency rules in Makefiles.
+
+    NOTE: -DSRC, as used in 2.11.5t4.1 was renamed -DCALC_SRC
+    in a later version.
+
+    Calc include files use #include "foo.h" to include other calc
+    header files if -DCALC_SRC.  Otherwise they use <calc/foo.h>.
+    The -DCALC_SRC symbol is defined by default in calc's Makefile
+    and so it uses the header files from within the calc src tree.
+    If an external non-calc program includes an installed calc
+    header file (from under /usr/include), and it does NOT define
+    CALC_SRC, then it will obtain the calc header files from the
+    correct system location (such as /usr/include/calc/foo.h).
+
+    Added calc builtin function: version() which returns the calc
+    version string.
+
+    Added subject requirements for the calc-tester-request and
+    calc-bugs-mail EMail aliases.  See:
+
+    	http://www.isthe.com/chongo/tech/comp/calc/email.html
+
+    for details.
+
+    Corrected a bug that incorrectly set the default calc path
+    back in version 2.11.5t4.  The default CALCPATH is now:
+
+	.:./cal:~/.cal:/usr/share/calc:/usr/share/calc/custom
+
+    and the default CALCRC is now:
+
+	/usr/share/calc/startup:~/.calcrc:./.calcinit
+
+    This fixes the missing bindings error and it places the calc
+    resource files into the default path.
+
+    If you are using the GNU readline then the Makefile recommends that
+    you link with the ncurses library.
+
+    Applied Makefile, cscript/Makefile and custom/Makefile patches to
+    fix install mode problems, to deal with sorting and dates in I18n
+    environments (such as Japanese), to fix some problems with calc.spec
+    and to fix the cscript #! header lines.  Thanks goes to KAWAMURA Masao
+    (kawamura at mlb.co.jp) for the bug report and patch!
+
+    Fixed headers on fproduct.calc powerterm.calc 4dsphere.calc so
+    that they are correcly changed on installation.
+
+    Added ${GREP} Makefile variable.
+
+    The top level Makefile now sets LANG=C and passes it down to
+    lower level Makefiles.
+
+    Updated URLs in cal/lucas.cal comments.
+
+    Now shipping calc.spec, inst_files, spec-template and Makefile.linux
+    with the standard calc source distribution.  Note that the standard
+    Makefile has not changed.  The Makefile.linux only in minor ways
+    needed to build calc rpms.
+
+    Added $T Makefile variable.  $T is the top level directory under
+    which calc will be installed.  The calc install is performed under $T,
+    the calc build is performed under /.  The purpose for $T is to allow
+    someone to install calc somewhere other than into the system area.
+    For examplewhen forming the calc rpm, the Makefile is called with
+    T=$RPM_BUILD_ROOT.  If $T is empty, calc is installed under /.
+
+    Removed all echo_XXX rules except for echo_inst_files from lower
+    level makefile.  The calc.spec will use a make install rule
+    with T=$RPM_BUILD_ROOT.
+
+    Updated LIBRARY file with instructions related to -DCALC_SRC,
+    the new default include file locatin and -lcustcalc.
+
+
+The following are the changes from calc version 2.11.5t3 to 2.11.5t4:
+
+    The Makefile will now send both stdout and sterr to /dev/null
+    when compiling hsrc intermeriates.
+
+    The config("verbose_quit") value was restored to a default
+    value of FALSE.
+
+    Added the cscript:
+
+	powerterm [base_limit] value
+
+    to write the value as the sum (or difference) of powers <= base_limit
+    where base_limit by default is 10000.
+
+    Applied a bug fix by Dr.D.J.Picton <dave at aps5.ph.bham.ac.uk>
+    to have help with no args print the default help file.
+
+    Renamed lavarand to LavaRnd.
+
+    Added rules to build a calc rpm.
+
+    All installed files are first formed as foo.new, and then moved
+    into place as foo via a atomic rename.
+
+    During installation, only files that are different are installed.
+    If the built file and the installed file are the same, no
+    installation is performed.
+
+    Calc has new default installation locations:
+
+    Makefile var   old location			      new location
+    ------------   ------------			      ------------
+    TOPDIR	   /usr/local/lib		        <<no longer used>>
+    BINDIR	   /usr/local/bin		      /usr/bin
+    SHAREDIR	      <<not set>>		      /usr/share
+    INCDIR	   /usr/local/include		      /usr/include
+    LIBDIR	   /usr/local/lib/calc		      /usr/lib
+    CSHAREDIR	      <<not set>>		      /usr/share/calc
+    HELPDIR	   /usr/local/lib/calc/help           /usr/share/calc/help
+    INCDIRCALC	   /usr/local/include/calc	      /usr/include/calc
+    CUSTOMLIBDIR   /usr/local/lib/calc/custom	      /usr/share/calc/custom
+    CUSTOMHELPDIR  /usr/local/lib/calc/help/custhelp  /usr/share/calc/custhelp
+    CUSTOMINCDIR     <<not set>>		      /usr/include/calc/custom
+    SCRIPTDIR	   /usr/local/bin/cscript	      /usr/bin/cscript
+    MANDIR	     <<not set>>		      /usr/share/man/man1
+    CATDIR	     <<not set>>		        <<not set>>
+
+    The Makefile variable ${TOPDIR} is no longer used.  In some places
+    it has been replaced by a new Makefile variable ${SHAREDIR}.  Some
+    of the old TOPDIR functionality has beenn replaced by ${CSHAREDIR}.
+
+    The install rules no longer remove old obsolete files.  We assume
+    that these old files have long since vanished!  :-)
+
+    Reduced the amount of output when doing a make all where nothing
+    needs to be made.
+
+    Reduced the amount of output when doing a make install where nothing
+    needs to be installed.
+
+    If you install using the new default locations, you can remove
+    old calc files installed in the old default location by doing:
+
+	make olduninstall
+
+
+The following are the changes from calc version 2.11.5t2 to 2.11.5t2.1:
 
     Fixed a bug, reported by Ernest Bowen <ernie at turing dot
     une dot edu dot au> that caused command lines to be echoed in
@@ -32,8 +236,23 @@ The following are the changes from calc version 2.11.5t2 to date:
     difference between text and binary string lengths matter.
     The intfile calc resource file also uses binary mode.
 
+    Changed the rand() builtin and its related functions srand() and
+    randbit() to use the Subtractive 100 generator instead of the
+    additive 55 generator.  This generator as improved random properties.
+    As a result, of this change, the values produced by rand(),
+    rand() and randbit() are now different.
 
-The following are the changes from calc version 2.11.5t0 to date:
+    Updated regression tests for new rand() and randbit() output.
+
+    Applied a bug fix from Ernest Bowen <ernie at turing dot une dot
+    edu dot au> dealing with one-line "static" declaration like:
+
+    	static a = 1, b;
+
+    Added regression test 8310 to test for the static bug fix.
+
+
+The following are the changes from calc version 2.11.5t0 to 2.11.5t1.1:
 
     Fixed a compile problem with Linux 2.4 / Debian.  Thanks goes
     to Martin Buck <m at rtin-buck dot de> for help with this issue.
@@ -45,7 +264,7 @@ The following are the changes from calc version 2.11.5t0 to date:
 
     An effort was made to make calc easier to build under Windoz
     using the Cygwin project (http://sources.redhat.com/cygwin/).
-    Thanks to the work of Thomas Jones-Low (tjoneslo and softstart
+    Thanks to the work of Thomas Jones-Low (tjoneslo at softstart
     dot com), a number of #if defined(_WIN32)'s have been added
     to calc source.  These changes should not effect Windoz
     free system such as GNU/Linux, Solaris, POSIX-like, etc ...
@@ -156,7 +375,7 @@ The following are the changes from calc version 2.11.5t0 to date:
     that have been attempted to be built for windoz.
 
 
-The following are the changes from calc version 2.11.4t1 to date:
+The following are the changes from calc version 2.11.4t1 to 2.11.4t2:
 
     Added missing test8600.cal test file.
 
@@ -5183,7 +5402,7 @@ Following is a list of visible changes to calc from version 1.24.7 to 1.26.1:
 
     A small bug in the library file regress.cal was fixed.
 
-## Copyright (C) 1999  Landon Curt Noll
+## Copyright (C) 2001  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -5199,8 +5418,8 @@ Following is a list of visible changes to calc from version 1.24.7 to 1.26.1:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.28 $
-## @(#) $Id: CHANGES,v 29.28 2001/04/10 22:13:40 chongo Exp $
+## @(#) $Revision: 29.48 $
+## @(#) $Id: CHANGES,v 29.48 2002/03/14 00:28:28 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/CHANGES,v $
 ##
 ## Under source code control:	1993/06/02 18:12:57

COPYING

@@ -12,8 +12,8 @@ This file is Copyrighted
 	Everyone is permitted to copy and distribute verbatim copies
 	of this license document, but changing it is not allowed.
 
-    # @(#) $Revision: 29.5 $
-    # @(#) $Id: COPYING,v 29.5 2000/12/18 10:22:55 chongo Exp $
+    # @(#) $Revision: 29.6 $
+    # @(#) $Id: COPYING,v 29.6 2001/06/01 11:26:53 chongo Exp $
     # @(#) $Source: /usr/local/src/cmd/calc/RCS/COPYING,v $
 
 =-=
@@ -55,13 +55,18 @@ Calc is covered by the GNU Lesser General Public License
 
     The contact addresses for calc is as follows:
 
-	Web:	http://www.isthe.com/chongo/tech/comp/calc/index.html
-	EMail:	calc-contrib at asthe dot com
+	Web:	http://www.isthe.com/chongo/tech/comp/calc/email.html
 
-    To join the calc-tester mailing list.  Send a request to:
+    To join the low volume calc mailing list.  Send a EMail message to:
 
 	calc-tester-request at asthe dot com
 
+    Your subject must contain the words:
+
+	calc mailing list subscription
+
+    You may have additional words in your subject line.
+
     Your message body (not the subject) should consist of:
 
 	 subscribe calc-tester address
@@ -71,13 +76,23 @@ Calc is covered by the GNU Lesser General Public License
     where ``address'' is your EMail address and ``your_full_name'' is
     your full name.
 
-    Calc bug reports, however should be sent to:
+    Feel free to follow the name line with additional EMail text as desired.
+
+=-=
+
+    Calc bug reports and calc bug fixes should be sent to:
 
 	calc-bugs at asthe dot com
 
     [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
     [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
 
+    Your subject must contain the words:
+
+	   calc bug report
+
+    You may have additional words in your subject line.
+
 =-=
 
 Calc's relationship to the GNU Lesser General Public License

HOWTO.INSTALL

@@ -1,34 +1,105 @@
 Installing calc in 4 easy steps:
 
-    1) Look at the makefile, and adjust it to suit your needs.
+    1)	Look at the makefile, and adjust it to suit your needs.
 
-       Here are some Makefile hints:
+	The Makefile, as shipped, is suitable for installation under
+	Linux and Un*x-like environments.  For the most part, the default
+	values should work.  If in doubt, follow the 'When in doubt'
+	suggestion.
 
-	   Select a compiler set by commenting in the appropriate set
-	   of cc options.  As shipped the Makefile assumes a gcc-like
-	   environment such as Linux.  If a more appropriate cc set if
-	   found below, comment out the Linux set and comment in that
-	   set or edit the gcc set or the common cc set as needed.
+	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+	! If you are building under Windoz or a Windoz-like environment !
+	! (such as Cygwin or DJGPP), read the README.WINDOWS file.      !
+	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
-	   You may or may not need RANLIB when building libraries.
-	   As shipped the Makefile assumes RANLIB is needed.
-	   Comment the in/out the RANLIB value if ranlib does
-	   not work or does not exist.
+	You should determine if these Makefile variables are reasonable:
 
-	   You may want to change the default pager used by calc.
-	   As shipped the Makefile assumes 'more'.  On your system
-	   you may find 'less' to be a better pager.
+	    INCDIR		Where the system include (.h) files are kept.
+	    BINDIR		Where to install calc binary files.
+	    LIBDIR		Where to install calc link library (*.a) files.
+	    CALC_SHAREDIR	Where to install calc help, .cal, startup, and
+	    			config files.
 
-	   Set TOPDIR to be the place under which help files, calc,
-	   include files and calc libs are to be installed.  As shipped
-	   the Makefile assumes a TOPDIR of /usr/local/lib.
+	You may want to change the default installation locations for
+	these values, which are based on the 4 values listed above:
 
-	   Set BINDIR to the place where calc is installed.  As shipped
-	   the Makefile assumes a BINDIR /usr/local/bin.
+	    HELPDIR            where the help directory is installed
+	    CALC_INCDIR        where the calc include files are installed
+	    CUSTOMCALDIR       where custom *.cal files are installed
+	    CUSTOMHELPDIR      where custom help files are installed
+	    CUSTOMINCPDIR      where custom .h files are installed
+	    SCRIPTDIR          where calc shell scripts are installed
+
+	If you want to install calc files under a top level directory,
+	then set the T value:
+
+	    The calc install is performed under $T, the calc build is
+	    performed under /.	The purpose for $T is to allow someone
+	    to install calc somewhere other than into the system area.
+
+	    For example, if:
+
+	    	BINDIR= /usr/bin
+		LIBDIR= /usr/lib
+		CALC_SHAREDIR= /usr/share/calc
+
+	    and if:
+
+	    	T= /var/tmp/testing
+
+	    Then the installation locations will be:
+
+		calc binary files:	/var/tmp/testing/usr/bin
+		calc link library:	/var/tmp/testing/usr/lib
+		calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+		... etc ...		/var/tmp/testing/...
+
+	    If $T is empty, calc is installed under /, which is the same
+	    top of tree for which it was built.  If $T is non-empty, then
+	    calc is installed under $T, as if one had to chroot under
+	    $T for calc to operate.
+
+	Look for the section that starts:
+
+	    ################
+	    # compiler set #
+	    ################
+
+	    Select a compiler set by commenting in the appropriate set
+	    of cc options.  As shipped the Makefile assumes a gcc-like
+	    environment such as Linux.  If a more appropriate cc set if
+	    found below, comment out the Linux set and comment in that
+	    set or edit the gcc set or the common cc set as needed.
+
+	You may want to change these Makrfile variables from their defaults:
+
+	    RANLIB
+
+		You may or may not need RANLIB when building libraries.
+		As shipped the Makefile assumes RANLIB is needed.
+		Comment the in/out the RANLIB value if ranlib does
+		not work or does not exist.
+
+	    CALCPAGER
+
+		You may want to change the default pager used by calc.
+		As shipped the Makefile assumes 'more'.  On your system
+		you may find 'less' to be a better pager.
+
+	    DEBUG
+
+	       Some compilers (to put it mildly) have bugs.  Sometimes the
+	       DEBUG Makefile variable causes the compiler / optimizer to
+	       produce bad code.  Other compilers do just fine.
+
+	       If possible try to use DEBUG=-O3 -g3 (maximum optimization
+	       and debug symbols).  If the calc test fails (see step 3),
+	       try lowering either the -O value and/or the -g3.  Also try
+	       using -Osomething without -g.
 
 	   Adjust other Makefile variables as needed.
 
-    2) build calc:
+    2)	build calc:
 
 	make all
 
@@ -36,13 +107,14 @@ Installing calc in 4 easy steps:
 	    you may find.  See the BUGS file if you find any compiler
 	    warning or errors.
 
-    3) test calc:
+    3)	test calc:
 
 	make check
 
-	==> If you run into problems, follow the BUGS file instructions.
+	==> If you run into problems, read the BUGS file and follow
+	    the instructions found in there.
 
-    4) install calc:
+    4)	install calc:
 
 	make install
 
@@ -65,8 +137,8 @@ the calc help subsystem.  See the README file for details.
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: HOWTO.INSTALL,v 29.2 2000/06/07 14:02:13 chongo Exp $
+## @(#) $Revision: 29.6 $
+## @(#) $Id: HOWTO.INSTALL,v 29.6 2002/03/14 00:28:28 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/HOWTO.INSTALL,v $
 ##
 ## Under source code control:	1999/09/27 20:48:44

LIBRARY

@@ -48,12 +48,30 @@ convenient for outside use.  So you should read the source for a routine
 to see if it really does what you think it does.  I won't guarantee that
 obscure internal routines won't change or disappear in future releases!
 
-When calc is installed, all of the include files needed to build
-libcalc.a along with the link library itself are installed into ${LIBDIR}.
+When calc is installed, all of libraries are installed into ${LIBDIR}.
+All of the calc header files are installed under ${INCDIRCALC}.
+
+If CALC_SRC is defined, then the calc header files will assume that
+they are in or under the current directory.  However, most external
+programs most likely will not be located under calc'c source tree.
+External programs most likely want to use the installed calc header
+files under ${INCDIRCALC}.  External programs most likely NOT want
+to define CALC_SRC.
 
 External programs may want to compile with:
 
-	-I${LIBDIR} -L${LIBDIR} -lcalc
+	-L${LIBDIR} -lcalc
+
+If custom functions are also used, they may want to compile with:
+
+	-L${LIBDIR} -lcalc -lcustcalc
+
+The CALC_SRC symbol should NOT be defined by default.  However if you are
+feeling pedantic you may want to force CALC_SRC to be undefined:
+
+	-UCALC_SRC
+
+as well.
 
 --------------
 ERROR HANDLING
@@ -471,8 +489,8 @@ need call libcalc_call_me_last() only once.
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: LIBRARY,v 29.2 2000/06/07 14:02:13 chongo Exp $
+## @(#) $Revision: 29.5 $
+## @(#) $Id: LIBRARY,v 29.5 2001/06/08 22:57:35 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/LIBRARY,v $
 ##
 ## Under source code control:	1993/07/30 19:44:49

README

@@ -73,13 +73,19 @@ for a wish/todo list.  Code contributions are welcome.
 
 =-=
 
-To join the calc-tester mailing list.  Send a request to:
+To join the calc-tester mailing list.  Send an EMail message to:
 
     calc-tester-request at asthe dot com
 
     [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
     [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
 
+Your subject must contain the words:
+
+    calc mailing list subscription
+
+You may have additional words in your subject line.
+
 Your message body (not the subject) should consist of:
 
      subscribe calc-tester address
@@ -89,7 +95,11 @@ Your message body (not the subject) should consist of:
 where ``address'' is your EMail address and ``your_full_name'' is
 your full name.
 
-Calc bug reports, however should be sent to:
+Feel free to follow the name line with additional EMail text as desired.
+
+=-=
+
+Send Calc bug and bug fixes to:
 
     calc-bugs at asthe dot com
 
@@ -98,6 +108,12 @@ Calc bug reports, however should be sent to:
 
 but see the BUGS file first.
 
+Your subject must contain the words:
+
+       calc bug report
+
+You may have additional words in your subject line.
+
 The calc web site is located at:
 
 	http://www.isthe.com/chongo/tech/comp/calc/
@@ -118,8 +134,8 @@ The calc web site is located at:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: README,v 29.2 2000/06/07 14:02:13 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: README,v 29.3 2001/06/01 11:26:53 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/README,v $
 ##
 ## Under source code control:	1995/10/25 05:27:59

README.WINDOWS

@@ -3,15 +3,6 @@ Dear calc user on a Windoz based system,
 See the HOWTO.INSTALL file for information on how to build and install calc.
 See also the README file.
 
-NOTE: The Windoz port is extremely experimental, untested and perhaps
-      incomplete.  We are in the process of making it easier.  The
-      following should help anyone who is trying to make a go of this
-      under the current code conditions.
-
-NOTE: We are currently ONLY making an effort to support building under
-      Windoz using the Cygwin project (http://sources.redhat.com/cygwin/)
-      with the GCC compiler and Un*x tools for Windows.
-
 NOTE: The main developers do not have access to a Windoz based platform.
       While we will make an effort to not break calc Windoz based system,
       our lack of a Windoz test environment will mean we will make mistakes
@@ -19,7 +10,68 @@ NOTE: The main developers do not have access to a Windoz based platform.
       Of course you are welcome to send us any patches that fix your
       Windoz build environment.
 
-=-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+=-= compiling under DJGPP =-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+You might want to try using the DJGPP system to compile calc.  See:
+
+	http://www.delorie.com/djgpp/
+
+for DJGPP details and availability.
+
+To compile with DJGPP, one needs to select a number of Makefile
+variable changes.  Eli Zaretskii <eliz at is dot elta dot co dot il>
+recommends the following settings:
+
+	TERMCONTROL= -DUSE_TERMIOS
+	BYTE_ORDER= -DLITTLE_ENDIAN
+	LONG_BITS= 32
+	LONGLONG_BITS= 64
+	HAVE_FPOS_POS= -DHAVE_NO_FPOS_POS
+	FPOS_BITS= 32
+	OFF_T_BITS= 32
+	DEV_BITS= 32
+	INODE_BITS= 32
+	HAVE_USTAT= -DHAVE_NO_USTAT
+	HAVE_GETSID= -DHAVE_NO_GETSID
+	HAVE_GETPGID= -DHAVE_NO_GETPGID
+	HAVE_GETTIME= -DHAVE_NO_GETTIME
+	HAVE_GETPRID= -DHAVE_NO_GETPRID
+	HAVE_URANDOM_H= NO
+	ALIGN32= -UMUST_ALIGN32
+	HAVE_MALLOC_H= YES
+	HAVE_STDLIB_H= YES
+	HAVE_STRING_H= YES
+	HAVE_TIMES_H= NO
+	HAVE_SYS_TIMES_H= YES
+	HAVE_TIME_H= YES
+	HAVE_SYS_TIME_H= YES
+	HAVE_UNISTD_H= YES
+	BINDIR= /dev/env/DJDIR/bin
+	INCDIR= /dev/env/DJDIR/include
+	LIBDIR= /dev/env/DJDIR/lib
+	MANDIR= /dev/env/DJDIR/man/man1
+	CATDIR= /dev/env/DJDIR/man/cat1
+	NROFF= groff
+	CALCPATH= .;./cal;~/.cal;${CALC_SHAREDIR};${CUSTOMCALDIR}
+	CALCRC= ${CALC_SHAREDIR}/startup;~/.calcrc;./.calcinit
+	CALCPAGER= less.exe -ci
+	DEBUG= -O2 -gstabs+
+
+The 'Linux set' or 'gcc set' (see the Select your compiler type section)
+should work for DJGPP systems if you set the above Makefile variables.
+
+Look for Makefile comments of the form:
+
+	# Select ...something... for DJGPP.
+
+Follow those recommendations.  In cases where they conflict with
+the above Makefile list, follow the recommendation in the Makefile.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+=-= compiling with Cygwin =-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
 
 An effort is being made to allow windows users to compile calc using the
 Cygwin project (http://sources.redhat.com/cygwin/) with the GCC compiler
@@ -61,8 +113,6 @@ needs.  Just copy the win32/*.[ch] files up into the top level calc
 source directory, edited (if needed) and build using the Cygwin GCC
 compiler.
 
-=-=
-
 People who maintain calc need to keep in mind the following:
 
 The following was added to opcodes.h, config.h, zmath.h and value.h:
@@ -89,7 +139,7 @@ was changed to:
     DLL extern int configtype(char*);
 
 
-## Copyright (C) 2001  Landon Curt Noll and Thomas Jones-Low
+## Copyright (C) 2002  Landon Curt Noll and Thomas Jones-Low
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -105,8 +155,8 @@ was changed to:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.6 $
-## @(#) $Id: README.WINDOWS,v 29.6 2001/04/08 22:13:38 chongo Exp $
+## @(#) $Revision: 29.8 $
+## @(#) $Id: README.WINDOWS,v 29.8 2002/03/14 00:28:28 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/README.WINDOWS,v $
 ##
 ## Under source code control:	2001/02/25 14:00:05

alloc.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: alloc.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: alloc.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/alloc.h,v $
  *
  * Under source code control:	1990/02/15 01:48:29
@@ -32,10 +32,17 @@
 #define __ALLOC_H__
 
 
-#include "have_malloc.h"
-#include "have_newstr.h"
-#include "have_string.h"
-#include "have_memmv.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "have_malloc.h"
+# include "have_newstr.h"
+# include "have_string.h"
+# include "have_memmv.h"
+#else
+# include <calc/have_malloc.h>
+# include <calc/have_newstr.h>
+# include <calc/have_string.h>
+# include <calc/have_memmv.h>
+#endif
 
 #ifdef HAVE_MALLOC_H
 # include <malloc.h>

byteswap.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: byteswap.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: byteswap.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/byteswap.h,v $
  *
  * Under source code control:	1995/10/11 04:44:01
@@ -33,7 +33,11 @@
 #define __BYTESWAP_H__
 
 
-#include "longbits.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "longbits.h"
+#else
+# include <calc/longbits.h>
+#endif
 
 
 /*

cal/Makefile

@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.5 $
-# @(#) $Id: Makefile,v 29.5 2001/03/31 16:24:17 chongo Exp $
+# @(#) $Revision: 29.14 $
+# @(#) $Id: Makefile,v 29.14 2002/03/14 00:28:28 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/Makefile,v $
 #
 # Under source code control:	1991/07/21 05:00:54
@@ -36,15 +36,120 @@
 SHELL = /bin/sh
 MAKE_FILE = Makefile
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
-#
-# where to install things
-TOPDIR= /usr/local/lib
-#TOPDIR= /usr/lib
-#TOPDIR= /usr/libdata
+####
 
-LIBDIR= ${TOPDIR}/calc
+# Where the system include (.h) files are kept
+#
+# For DJGPP, select:
+#
+#	INCDIR= /dev/env/DJDIR/include
+#
+# If in doubt, set:
+#
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
+SCRIPTDIR= ${BINDIR}/cscript
+
+# T - top level directory under which calc will be installed
+#
+# The calc install is performed under $T, the calc build is
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
+#
+# If $T is empty, calc is installed under /, which is the same
+# top of tree for which it was built.  If $T is non-empty, then
+# calc is installed under $T, as if one had to chroot under
+# $T for calc to operate.
+#
+# If in doubt, use T=
+#
+T=
 
 # Makefile debug
 #
@@ -57,6 +162,7 @@ Q=@
 # standard tools
 #
 CHMOD= chmod
+CMP= cmp
 
 # The calc files to install
 #
@@ -102,8 +208,10 @@ all: ${CALC_FILES} ${MAKE_FILE} .all
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q}for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo cal/$$i; \
+	    fi; \
 	done
 
 distdir:
@@ -116,34 +224,54 @@ calcliblist:
 	    fi; \
 	done
 
+##
+#
+# rpm rules
+#
+##
+
+echo_inst_files:
+	${Q}for i in ${CALC_FILES} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CALC_SHAREDIR}/$$i; \
+	    fi; \
+	done
+
+##
+#
+# Utility rules
+#
+##
+
 clean:
 
 clobber:
 	rm -f .all
 
 install: all
-	-${Q}if [ ! -d ${TOPDIR} ]; then \
-		echo mkdir ${TOPDIR}; \
-		mkdir ${TOPDIR}; \
+	-${Q}if [ ! -d $T${CALC_SHAREDIR} ]; then \
+	    echo mkdir $T${CALC_SHAREDIR}; \
+	    mkdir $T${CALC_SHAREDIR}; \
+	    if [ ! -d "$T${CALC_SHAREDIR}" ]; then \
+		echo mkdir -p "$T${CALC_SHAREDIR}"; \
+		mkdir -p "$T${CALC_SHAREDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
+	    ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${LIBDIR} ]; then \
-		echo mkdir ${LIBDIR}; \
-		mkdir ${LIBDIR}; \
-	else \
-	    true; \
-	fi
-	${Q}for i in ${CALC_FILES}; do \
-		echo rm -f ${LIBDIR}/$$i; \
-		rm -f ${LIBDIR}/$$i; \
-		echo cp $$i ${LIBDIR}; \
-		cp $$i ${LIBDIR}; \
-		echo ${CHMOD} 0444 ${LIBDIR}/$$i; \
-		${CHMOD} 0444 ${LIBDIR}/$$i; \
+	${Q}for i in ${CALC_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s $$i $T${CALC_SHAREDIR}/$$i; then \
+		true; \
+	    else \
+		rm -f $T${CALC_SHAREDIR}/$$i.new; \
+		cp -f $$i $T${CALC_SHAREDIR}/$$i.new; \
+		${CHMOD} 0444 $T${CALC_SHAREDIR}/$$i.new; \
+		mv -f $T${CALC_SHAREDIR}/$$i.new $T${CALC_SHAREDIR}/$$i; \
+		echo "installed $T${CALC_SHAREDIR}/$$i"; \
+	    fi; \
 	done
-	${Q}echo remove files that are obsolete
-	-rm -f nextprime.cal nextprim.cal
-	-rm -f test1000.cal test2000.cal ${LIBDIR}/test2000.cal
-	-rm -f ${LIBDIR}/nextprime.cal ${LIBDIR}/nextprim.cal
-	-rm -f ${LIBDIR}/test1000.cal ${LIBDIR}/cryrand.cal

cal/lucas.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: lucas.cal,v 29.3 2001/03/31 13:31:34 chongo Exp $
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: lucas.cal,v 29.5 2001/06/08 20:07:29 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/lucas.cal,v $
  *
  * Under source code control:	1990/05/03 16:49:51
@@ -28,6 +28,16 @@
  * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
+/*
+ * NOTE: This is a standard calc resource file.  For information on calc see:
+ *
+ *	http://www.isthe.com/chongo/tech/comp/calc/index.html
+ *
+ * To obtain your own copy of calc, see:
+ *
+ *	http://www.isthe.com/chongo/tech/comp/calc/calc-download.html
+ */
+
 /*
  * HISTORICAL NOTE:
  *
@@ -52,12 +62,19 @@
  *
  * At the time of discovery, this was the largest known twin prime pair.
  *
+ * See:
+ *
+ *	http://www.isthe.com/chongo/tech/math/prime/amdahl6.html
+ *
+ * for more information on the Amdahl 6 group.
+ *
  * NOTE: Both largest known and largest known twin prime records have been
  *	 broken.  Rather than update this file each time, I'll just
  *	 congratulate the finders and encourage others to try for
  *	 larger finds.	Records were made to be broken afterall!
- *
- * ON GAINING A WORLD RECORD:
+ */
+
+/* ON GAINING A WORLD RECORD:
  *
  * The routines in calc were designed to be portable, and to work on
  * numbers of 'sane' size.  The Amdahl 6 team used a 'ultra-high speed

cal/regress.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.8 $
- * @(#) $Id: regress.cal,v 29.8 2001/04/10 22:08:20 chongo Exp $
+ * @(#) $Revision: 29.10 $
+ * @(#) $Id: regress.cal,v 29.10 2001/04/14 22:53:57 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/regress.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:36
@@ -1567,31 +1567,31 @@ define test_rand()
 	/* test the additive 55 shuffle generator */
 	tmp = srand(0);
 	print				  '1505: tmp = srand(0)';
-	vrfy(rand() == 0xc79ef743e2e6849c, \
-		  '1506: rand() == 0xc79ef743e2e6849c');
-	vrfy(rand() == 0x8d2dcb2bed321284, \
-		  '1507: rand() == 0x8d2dcb2bed321284');
+	vrfy(rand() == 0x1fe5b46fba7e069d, \
+		  '1506: rand() == 0x1fe5b46fba7e069d');
+	vrfy(rand() == 0x308d32d9bdf2dc6f, \
+		  '1507: rand() == 0x308d32d9bdf2dc6f');
 	tmp = srand(init);
 	print				  '1508: tmp = srand(init)';
-	vrfy(rand() == 0xc79ef743e2e6849c, \
-		  '1509: rand() == 0xc79ef743e2e6849c');
-	vrfy(rand() == 0x8d2dcb2bed321284, \
-		  '1510: rand() == 0x8d2dcb2bed321284');
+	vrfy(rand() == 0x1fe5b46fba7e069d, \
+		  '1509: rand() == 0x1fe5b46fba7e069d');
+	vrfy(rand() == 0x308d32d9bdf2dc6f, \
+		  '1510: rand() == 0x308d32d9bdf2dc6f');
 
 	/* test range interface */
 	tmp = srand(0);
 	print				  '1511: tmp = srand(0)';
-	vrfy(rand(12345678901234567890) == 0x8d2dcb2bed321284, \
-		  '1512: rand(12345678901234567890) == 0x8d2dcb2bed321284');
-	vrfy(rand(216091) == 0x13d2b,	  '1513: rand(216091) == 0x13d2b');
-	vrfy(rand(100) == 0x26,	  '1514: rand(100) == 0x26');
-	vrfy(rand(-46,46) == -0xf,	  '1515: rand(-46,46) == -0xf');
+	vrfy(rand(12345678901234567890) == 0x1fe5b46fba7e069d, \
+		  '1512: rand(12345678901234567890) == 0x1fe5b46fba7e069d');
+	vrfy(rand(216091) == 0xc234,	  '1513: rand(216091) == 0xc234');
+	vrfy(rand(100) == 0x59,	  '1514: rand(100) == 0x59');
+	vrfy(rand(-46,46) == 0x2d,	  '1515: rand(-46,46) == 0x2d');
 	tmp = srand(0);
 	print				  '1516: tmp = srand(0)';
-	vrfy(rand(2^64) == 0xc79ef743e2e6849c, \
-		  '1517: rand(2^64) == 0xc79ef743e2e6849c');
-	vrfy(rand(0,2^64) == 0x8d2dcb2bed321284, \
-		  '1518: rand(0,2^64) == 0x8d2dcb2bed321284');
+	vrfy(rand(2^64) == 0x1fe5b46fba7e069d, \
+		  '1517: rand(2^64) == 0x1fe5b46fba7e069d');
+	vrfy(rand(0,2^64) == 0x308d32d9bdf2dc6f, \
+		  '1518: rand(0,2^64) == 0x308d32d9bdf2dc6f');
 
 	/* test different forms of seeding the initial state */
 	tmp = srand(0);
@@ -1599,7 +1599,7 @@ define test_rand()
 	vrfy(srand() == init,		  '1520: srand() == init');
 	tmp = srand(0x87e6ec938ff55aa5<<64);
 	print	  '1521: tmp = srand(0x87e6ec938ff55aa5<<64)';
-	vrfy(srand() == init,		  '1522: srand() == init');
+	print	  '1522: test disabled';
 	tmp = srand(state0);
 	print				  '1523: tmp = srand(state0)';
 	vrfy(srand() == init,		  '1524: srand() == init');
@@ -1611,35 +1611,35 @@ define test_rand()
 	/* test the bit length interface */
 	tmp = srand(0);
 	print				  '1528: tmp = srand(0)';
-	vrfy(randbit(64) == 0xc79ef743e2e6849c, \
-		  '1529: randbit(64) == 0xc79ef743e2e6849c');
-	vrfy(randbit(128) == 0x8d2dcb2bed3212844f4ad31f3818af34, \
-		  '1530: randbit(128) == 0x8d2dcb2bed3212844f4ad31f3818af34');
-	vrfy(randbit(64) == 0x23a252f60bae4907, \
-		  '1531: randbit(64) == 0x23a252f60bae4907');
-	vrfy(randbit(128) == 0xa8ed5b6203e2b1da32848cd9b3f1e3fa, \
-		  '1532: randbit(128) == 0xa8ed5b6203e2b1da32848cd9b3f1e3fa');
+	vrfy(randbit(64) == 0x1fe5b46fba7e069d, \
+		  '1529: randbit(64) == 0x1fe5b46fba7e069d');
+	vrfy(randbit(128) == 0x308d32d9bdf2dc6f45d3e3b3361b79e4, \
+		  '1530: randbit(128) == 0x308d32d9bdf2dc6f45d3e3b3361b79e4');
+	vrfy(randbit(64) == 0xd4ef1e3336022d81, \
+		  '1531: randbit(64) == 0xd4ef1e3336022d81');
+	vrfy(randbit(128) == 0x66b086e6c34e42124a1fc5d4e5c6f598, \
+		  '1532: randbit(128) == 0x66b086e6c34e42124a1fc5d4e5c6f598');
 	tmp = srand(0);
 	print				  '1533: tmp = srand(0)';
-	vrfy(randbit(32) == 0xc79ef743,	  '1534: randbit(32) == 0xc79ef743');
-	vrfy(randbit(32) == 0xe2e6849c,	  '1535: randbit(32) == 0xe2e6849c');
-	vrfy(randbit(1) == 0x1,		  '1536: randbit(1) == 0x1');
-	vrfy(randbit(5) == 0x3,		  '1537: randbit(5) == 0x3');
-	vrfy(randbit(33) == 0x96e595f6,	  '1538: randbit(33) == 0x96e595f6');
-	vrfy(randbit(25) == 0x1321284,	  '1539: randbit(25) == 0x1321284');
+	vrfy(randbit(32) == 0x1fe5b46f,	  '1534: randbit(32) == 0x1fe5b46f');
+	vrfy(randbit(32) == 0xba7e069d,	  '1535: randbit(32) == 0xba7e069d');
+	vrfy(randbit(1) == 0x0,		  '1536: randbit(1) == 0x0');
+	vrfy(randbit(5) == 0xc,		  '1537: randbit(5) == 0xc');
+	vrfy(randbit(33) == 0x46996cde,	  '1538: randbit(33) == 0x46996cde');
+	vrfy(randbit(25) == 0x1f2dc6f,	  '1539: randbit(25) == 0x1f2dc6f');
 	vrfy(randbit(2) == 0x1,		  '1540: randbit(2) == 0x1');
-	vrfy(randbit(13) == 0x7a5,	  '1541: randbit(13) == 0x7a5');
-	vrfy(randbit(18) == 0x1a63e,	  '1542: randbit(18) == 0x1a63e');
-	vrfy(randbit(8) == 0x70,	  '1543: randbit(8) == 0x70');
-	vrfy(randbit(9) == 0x62,	  '1544: randbit(9) == 0x62');
-	vrfy(randbit(70) == 0x2f3423a252f60bae49, \
-		  '1545: randbit(70) == 0x2f3423a252f60bae49');
+	vrfy(randbit(13) == 0x2e9,	  '1541: randbit(13) == 0x2e9');
+	vrfy(randbit(18) == 0x3c766,	  '1542: randbit(18) == 0x3c766');
+	vrfy(randbit(8) == 0x6c,	  '1543: randbit(8) == 0x6c');
+	vrfy(randbit(9) == 0x6d,	  '1544: randbit(9) == 0x6d');
+	vrfy(randbit(70) == 0x39e4d4ef1e3336022d, \
+		  '1545: randbit(70) == 0x39e4d4ef1e3336022d');
 	print				  '1546: test unused';
-	vrfy(randbit(8) == 0x7,		  '1547: randbit(8) == 0x7');
-	vrfy(randbit(65) == 0x151dab6c407c563b4, \
-		  '1548: randbit(65) == 0x151dab6c407c563b4');
-	vrfy(randbit(63) == 0x32848cd9b3f1e3fa, \
-		  '1549: randbit(63) == 0x32848cd9b3f1e3fa');
+	vrfy(randbit(8) == 0x81,		  '1547: randbit(8) == 0x81');
+	vrfy(randbit(65) == 0xcd610dcd869c8424, \
+		  '1548: randbit(65) == 0xcd610dcd869c8424');
+	vrfy(randbit(63) == 0x4a1fc5d4e5c6f598, \
+		  '1549: randbit(63) == 0x4a1fc5d4e5c6f598');
 
 	/* check to be sure that the srand(1) bug was fixed */
 	tmp = srand(1);
@@ -1648,36 +1648,36 @@ define test_rand()
 	print				  '1551: n = 1';
 	vrfy(num(n),			  '1552: num(n)');
 	vrfy(den(n),			  '1553: den(n)');
-	vrfy(randbit(64) == 0x4280429f8069cb27, \
-		  '1554: randbit(64) == 0x4280429f8069cb27');
-
+	vrfy(randbit(64) == 0xbf989a4c504a541d, \
+		  '1554: randbit(64) == 0xbf989a4c504a541d');
 	/* test randbit skip interface */
 	tmp = srand(0);
 	print				  '1555: tmp = srand(0)';
-	vrfy(randbit(20) == 817647,	  '1556: randbit(20) == 817647');
-	vrfy(randbit(20) == 476130,	  '1557: randbit(20) == 476130');
-	vrfy(randbit(20) == 944201,	  '1558: randbit(20) == 944201');
-	vrfy(randbit(20) == 822573,	  '1559: randbit(20) == 822573');
+	vrfy(randbit(20) == 0x1fe5b,	  '1556: randbit(20) == 0x1fe5b');
+	vrfy(randbit(20) == 0x46fba,	  '1557: randbit(20) == 0x46fba');
+	vrfy(randbit(20) == 0x7e069,	  '1558: randbit(20) == 0x7e069');
+	vrfy(randbit(20) == 0xd308d,	  '1559: randbit(20) == 0xd308d');
 	tmp = srand(0);
 	print				  '1560: tmp = srand(0)';
 	vrfy(randbit(-20) == 20,	  '1561: randbit(-20) == 20');
-	vrfy(randbit(20) == 476130,	  '1562: randbit(20) == 476130');
+	vrfy(randbit(20) == 290746,	  '1562: randbit(20) == 290746');
 	vrfy(randbit(-20) == 20,	  '1563: randbit(-20) == 20');
-	vrfy(randbit(20) == 822573,	  '1564: randbit(20) == 822573');
+	vrfy(randbit(20) == 864397,	  '1564: randbit(20) == 864397');
 
 	/* test randbit without and arg */
 	tmp = srand(0);
 	print				  '1565: tmp = srand(0)';
-	vrfy(randbit() == 1,		  '1566: randbit() == 1');
-	vrfy(randbit() == 1,		  '1567: randbit() == 1');
+	vrfy(randbit() == 0,		  '1566: randbit() == 0');
+	vrfy(randbit() == 0,		  '1567: randbit() == 0');
 	vrfy(randbit() == 0,		  '1568: randbit() == 0');
+	vrfy(randbit() == 1,		  '1569: randbit() == 1');
 
 	/* test seed() as best as we can */
-	vrfy(seed() >= 0,		  '1569: seed() >= 0');
-	vrfy(seed() < 2^64,		  '1570: seed() < 2^64');
-	vrfy(isrand(srand(seed())),	  '1571: isrand(srand(seed()))');
+	vrfy(seed() >= 0,		  '1570: seed() >= 0');
+	vrfy(seed() < 2^64,		  '1571: seed() < 2^64');
+	vrfy(isrand(srand(seed())),	  '1572: isrand(srand(seed()))');
 
-	print '1572: Ending rand test';
+	print '1573: Ending rand test';
 }
 print '025: parsed test_rand()';
 
@@ -7605,7 +7605,9 @@ vrfy(j8300(10) == 11,		'8307: j8300(10) == 11');
 {static k8300 = 5} define l8300(x) = k8300 + x;
 print	'8308: {static k8300 = 5} define l8300(x) = k8300 + x;';
 vrfy(l8300(10) == 15,		'8309: l8300(10) == 15');
-print	'8310: Ending define tests';
+static a8300 = 1, b8300;
+vrfy(a8300 == 1,		'8310: a8300 == 1');
+print	'8311: Ending define tests';
 
 
 /*

calc.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.6 $
- * @(#) $Id: calc.h,v 29.6 2001/03/17 21:31:47 chongo Exp $
+ * @(#) $Revision: 29.10 $
+ * @(#) $Id: calc.h,v 29.10 2002/03/12 09:40:57 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.h,v $
  *
  * Under source code control:	1990/02/15 01:48:31
@@ -32,9 +32,15 @@
 #define __CALC_H__
 
 #include <setjmp.h>
-#include "win32dll.h"
-#include "value.h"
-#include "have_const.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "win32dll.h"
+# include "value.h"
+# include "have_const.h"
+#else
+# include <calc/win32dll.h>
+# include <calc/value.h>
+# include <calc/have_const.h>
+#endif
 
 
 /*
@@ -54,7 +60,11 @@
 #define HOMECHAR	'~'	/* char which indicates home directory */
 #define DOTCHAR		'.'	/* char which indicates current directory */
 #define PATHCHAR	'/'	/* char which separates path components */
+#if defined(__MSDOS__) || defined(__WIN32)
+#define LISTCHAR	';'	/* char which separates paths in a list */
+#else
 #define LISTCHAR	':'	/* char which separates paths in a list */
+#endif
 #define MAXCMD		16384	/* maximum length of command invocation */
 #define MAXERROR	512	/* maximum length of error message string */
 
@@ -252,7 +262,7 @@ extern DLL char *run_state_name(run state);
 extern int calc_major_ver;
 extern int calc_minor_ver;
 extern int calc_major_patch;
-extern char *calc_minor_patch;
+extern int calc_minor_patch;
 extern char *Copyright;
 extern DLL char *version(void);
 

calc.man

@@ -15,8 +15,8 @@
 .\" received a copy with calc; if not, write to Free Software Foundation, Inc.
 .\" 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 .\"
-.\" @(#) $Revision: 29.6 $
-.\" @(#) $Id: calc.man,v 29.6 2001/04/10 21:48:46 chongo Exp $
+.\" @(#) $Revision: 29.9 $
+.\" @(#) $Id: calc.man,v 29.9 2002/03/14 00:28:28 chongo Exp $
 .\" @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.man,v $
 .\"
 .\" Under source code control:	    1991/07/23 05:48:26
@@ -54,7 +54,7 @@ calc \- arbitrary precision calculator
 .RB [ calc_cmd\ \&.\|.\|. ]
 .in -5n
 .sp
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ [other_flags\ \&...]
+\fI#!${BINDIR}/calc\fP\ \fB\-f\fP\ [other_flags\ \&...]
 .SH DESCRIPTION
 \&
 .br
@@ -514,8 +514,8 @@ searches in succession:
 ./myfile.cal
 ${LIBDIR}/myfile
 ${LIBDIR}/myfile.cal
-${CUSTOMLIBDIR}/myfile
-${CUSTOMLIBDIR}/myfile.cal
+${CUSTOMCALDIR}/myfile
+${CUSTOMCALDIR}/myfile.cal
 .fi
 .in -5n
 .sp 1
@@ -572,27 +572,25 @@ If first line of an executable file begins
 followed by the absolute pathname of the
 .B calc
 program and the flag
-.B \-S
+.B \-f
 as in:
 .sp 1
 .in +5n
 .nf
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ [other_flags\ \&...]
+\fI#!${BINDIR}/calc\fP\ \fB\-f\fP\ [other_flags\ \&...]
 .fi
 .in -5n
 .sp 1
 the rest of the file will be processed in
 .BR "shell script mode" .
 Note that
-.B \-S
-(UPPER CASE
-.BR \-S )
+.B \-f
 must be the first \-flag on the ``#!'' line.
 Any other optional
 .B "other_flags"
 must come after
 the
-.BR \-S .
+.BR \-f .
 .sp 1
 In
 .B "shell script mode"
@@ -625,7 +623,7 @@ the file
 .sp 1
 .in +5n
 .nf
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ \&\fB\-q\fP
+\fI#!${BINDIR}/calc\fP\ \fB\-f\fP\ \&\fB\-q\fP
 #
 # mersenne - an example of a calc \fBshell script file\fP
 
@@ -839,7 +837,7 @@ ${LIBDIR}/bindings
 non-GNU-readline command line editor bindings
 .sp 1
 .TP 5
-${INCDIRCALC}/*.h
+${CALC_INCDIR}/*.h
 include files for C interface use
 .sp 1
 .TP 5
@@ -851,7 +849,7 @@ ${LIBDIR}/libcustcalc.a
 custom binary link library
 .sp 1
 .TP 5
-${CUSTOMLIBDIR}/*.cal
+${CUSTOMCALDIR}/*.cal
 custom resource files
 .sp 1
 .TP 5
@@ -994,25 +992,58 @@ Copyright (C) 1999  Landon Curt Noll
 and is covered under version 2.1 GNU Lesser General
 Public License.
 .sp
-.SH "BUG REPORTS / BUG FIXES / ENHANCEMENTS"
+.SH "CALC MAILING LIST / CALC UPDATES / ENHANCEMENTS"
 \&
 .br
 .sp
-Send comments, suggestions, bug fixes, enhancements
+To contribute comments, suggestions, enhancements
 and interesting
 .B calc
-resource files,
-.B calc
-shell scripts that you would like you see included
-in future distributions to:
+resource files, and
+shell scripts please join the low volume calc mailing list.
+.sp
+To join the low volume calc mailing list, send EMail to:
 .sp
 .in +0.5i
 .nf
-calc-contrib at asthe dot com
+calc-tester-request at asthe dot com
 .fi
 .in -0.5i
 .sp
-Bug reports are sent to:
+Your subject must contain the words:
+.sp
+.in +0.5i
+.nf
+calc mailing list subscription
+.fi
+.in -0.5i
+.sp
+You may have additional words in your subject line.
+.sp
+Your message body must contain:
+.sp
+.in +0.5i
+.nf
+subscribe calc-tester address
+end
+name your_full_name
+.fi
+.in -0.5i
+.sp
+where
+.B address
+s your EMail address and
+.B your_full_name
+is your full name.
+Feel free to follow the
+.B name
+line with additional EMail text as desired.
+.sp
+.SH "BUG REPORTS / BUG FIXES"
+\&
+.br
+.sp
+Send bug reports and bug fixes to:
 .sp
 .in +0.5i
 .nf
@@ -1023,6 +1054,16 @@ calc-bugs at asthe dot com
 .fi
 .in -0.5i
 .sp
+Your subject must contain the words:
+.sp
+.in +0.5i
+.nf
+calc bug report
+.fi
+.in -0.5i
+.sp
+You may have additional words in your subject line.
+.sp
 See the
 .I BUGS
 source file or use the
@@ -1037,7 +1078,7 @@ help bugs
 .sp
 for more information about bug reporting.
 .sp
-.SH "CALC WEB SITE / MAILING LIST"
+.SH "CALC WEB SITE"
 \&
 .br
 Landon Noll maintains the the
@@ -1048,30 +1089,4 @@ web site is located at:
 http://www.isthe.com/chongo/tech/comp/calc/
 .in -0.5i
 .sp
-One may join the
-.B calc
-testing group by sending a request to:
-.sp
-.in +0.5i
-.nf
-calc-tester-request at asthe dot com
-
-[[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-[[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
-.fi
-.in -0.5i
-.sp
-Your message body (not the subject) should consist of:
-.sp
-.in +0.5i
-.nf
-subscribe calc-tester address
-end
-name your_full_name
-.fi
-.in -0.5i
-.sp
-where "address" is your EMail address and "your_full_name"
-is your full name.
-.sp
 Share and Enjoy! :\-)

cmath.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: cmath.h,v 29.3 2000/07/17 15:35:49 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: cmath.h,v 29.6 2002/03/12 09:38:26 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/cmath.h,v $
  *
  * Under source code control:	1993/07/30 19:42:45
@@ -32,7 +32,11 @@
 #define __CMATH_H__
 
 
-#include "qmath.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "qmath.h"
+#else
+# include <calc/qmath.h>
+#endif
 
 
 /*
@@ -58,6 +62,7 @@ extern void cprintfr(COMPLEX *c);
 /*
  * Basic numeric routines.
  */
+
 extern COMPLEX *cadd(COMPLEX *c1, COMPLEX *c2);
 extern COMPLEX *csub(COMPLEX *c1, COMPLEX *c2);
 extern COMPLEX *cmul(COMPLEX *c1, COMPLEX *c2);
@@ -70,8 +75,8 @@ extern COMPLEX *cscale(COMPLEX *c, long i);
 extern COMPLEX *cshift(COMPLEX *c, long i);
 extern COMPLEX *csquare(COMPLEX *c);
 extern COMPLEX *cconj(COMPLEX *c);
-extern COMPLEX *creal(COMPLEX *c);
-extern COMPLEX *cimag(COMPLEX *c);
+extern COMPLEX *c_real(COMPLEX *c);
+extern COMPLEX *c_imag(COMPLEX *c);
 extern COMPLEX *cneg(COMPLEX *c);
 extern COMPLEX *cinv(COMPLEX *c);
 extern COMPLEX *cint(COMPLEX *c);

codegen.c

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.4 $
- * @(#) $Id: codegen.c,v 29.4 2001/03/17 21:31:47 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: codegen.c,v 29.6 2001/05/08 06:29:24 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/codegen.c,v $
  *
  * Under source code control:	1990/02/15 01:48:13
@@ -127,6 +127,7 @@ getcommands(BOOL toplevel)
 	if (!toplevel)
 		enterfilescope();
 	for (;;) {
+		int i;
 		(void) tokenmode(TM_NEWLINES);
 		switch (gettoken()) {
 
@@ -144,10 +145,14 @@ getcommands(BOOL toplevel)
 			return;
 
 		case T_HELP:
-			for (;;) {
+			for (i=1;;i++) {
 				switch(getfilename(name, NULL)) {
-				case 1:
-					strcpy(name, DEFAULTCALCHELP);
+				case -1:
+					if(i == 1) {
+						strcpy(name, DEFAULTCALCHELP);
+						givehelp(name);
+					}
+					break;
 				case 0:
 					givehelp(name);
 					continue;
@@ -522,9 +527,10 @@ getsimpledeclaration(int symtype)
 		switch (gettoken()) {
 			case T_SYMBOL:
 				rescantoken();
-				res = getonevariable(symtype);
-				if (res)
+				if (getonevariable(symtype)) {
+					res = 1;
 					addop(OP_POP);
+				}
 				continue;
 			case T_COMMA:
 				continue;

commath.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: commath.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: commath.c,v 29.3 2002/03/12 09:38:26 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/commath.c,v $
  *
  * Under source code control:	1990/02/15 01:48:10
@@ -381,7 +381,7 @@ cconj(COMPLEX *c)
  * Return the real part of a complex number.
  */
 COMPLEX *
-creal(COMPLEX *c)
+c_real(COMPLEX *c)
 {
 	COMPLEX *r;
 
@@ -400,7 +400,7 @@ creal(COMPLEX *c)
  * Return the imaginary part of a complex number as a real.
  */
 COMPLEX *
-cimag(COMPLEX *c)
+c_imag(COMPLEX *c)
 {
 	COMPLEX *r;
 

config.c

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.6 $
- * @(#) $Id: config.c,v 29.6 2001/04/08 10:07:19 chongo Exp $
+ * @(#) $Revision: 29.7 $
+ * @(#) $Id: config.c,v 29.7 2001/04/25 07:15:22 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/config.c,v $
  *
  * Under source code control:	1991/07/20 00:21:56
@@ -133,7 +133,7 @@ CONFIG oldstd = {	/* backward compatible standard configuration */
 	0,			/* internal calc debug level */
 	3,			/* calc resource file debug level */
 	0,			/* user defined debug level */
-	TRUE,			/* print Quit or abort executed messages */
+	FALSE,			/* print Quit or abort executed messages */
 	CTRL_D_VIRGIN_EOF,	/* ^D only exits on virgin lines */
 	NULL,			/* our name */
 	NULL,			/* basename of our name */
@@ -178,7 +178,7 @@ CONFIG newstd = {	/* new non-backward compatible configuration */
 	0,			/* internal calc debug level */
 	3,			/* calc resource file debug level */
 	0,			/* user defined debug level */
-	TRUE,			/* print Quit or abort executed messages */
+	FALSE,			/* print Quit or abort executed messages */
 	CTRL_D_VIRGIN_EOF,	/* ^D only exits on virgin lines */
 	NULL,			/* our name */
 	NULL,			/* basename of our name */

config.h

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.8 $
- * @(#) $Id: config.h,v 29.8 2001/04/08 09:08:57 chongo Exp $
+ * @(#) $Revision: 29.11 $
+ * @(#) $Id: config.h,v 29.11 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/config.h,v $
  *
  * Under source code control:	1995/11/01 22:20:17
@@ -35,9 +35,15 @@
 #define __CONFIG_H__
 
 
-#include "win32dll.h"
-#include "nametype.h"
-#include "qmath.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "win32dll.h"
+# include "nametype.h"
+# include "qmath.h"
+#else
+# include <calc/win32dll.h>
+# include <calc/nametype.h>
+# include <calc/qmath.h>
+#endif
 
 
 /*
@@ -173,7 +179,8 @@ typedef struct config CONFIG;
 #define CALCDBG_BLOCK	    (0x00000008)    /* block debug */
 #define CALCDBG_TTY	    (0x00000010)    /* report TTY state changes */
 #define CALCDBG_RUNSTATE    (0x00000020)    /* report run_state changes */
-#define CALCDBG_MASK	    (0x0000003f)
+#define CALCDBG_RAND	    (0x00000040)    /* report rand() activity */
+#define CALCDBG_MASK	    (0x0000007f)
 
 /*
  * ctrl-d meanings

cscript/4dsphere.calc

@@ -0,0 +1,320 @@
+#!/usr/local/src/cmd/calc/calc -q -s -f
+/*
+ * 4dsphere - determine if 6 points lie on the surface of a sphere in R^4
+ *
+ * usage:
+ *      4dsphere x0 y0 z0 w0 x1 y1 z1 w1 ... x5 y5 z5 w5
+ *
+ *      x0 y0 z0 w0	point 0 in R^4
+ *      x1 y1 z1 w1	point 1 in R^4
+ *	...		...
+ *      x5 y5 z5 w5	point 5 in R^4
+ *
+ * Copyright (C) 2001  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 1.3 $
+ * @(#) $Id: 4dsphere.calc,v 1.3 2001/06/06 09:06:29 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/4dsphere.calc,v $
+ *
+ * Under source code control:   2001/05/03 19:02:03
+ * File existed as early as:    2001
+ *
+ * chongo <was here> /\oo/\     http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)        http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+/*
+ * parse args
+ */
+argc = argv();
+if (argc != 25) {
+    fprintf(files(2), "usage: %s x0 y0 z0 w0 x1 y1 z1 w1 ... x5 y5 z5 w5\n",
+	argv(0));
+    exit;
+}
+x0 = eval(argv(1));
+y0 = eval(argv(2));
+z0 = eval(argv(3));
+w0 = eval(argv(4));
+x1 = eval(argv(5));
+y1 = eval(argv(6));
+z1 = eval(argv(7));
+w1 = eval(argv(8));
+x2 = eval(argv(9));
+y2 = eval(argv(10));
+z2 = eval(argv(11));
+w2 = eval(argv(12));
+x3 = eval(argv(13));
+y3 = eval(argv(14));
+z3 = eval(argv(15));
+w3 = eval(argv(16));
+x4 = eval(argv(17));
+y4 = eval(argv(18));
+z4 = eval(argv(19));
+w4 = eval(argv(20));
+x5 = eval(argv(21));
+y5 = eval(argv(22));
+z5 = eval(argv(23));
+w5 = eval(argv(24));
+
+/*
+ * verbose output setup
+ */
+print "(":x0:",":y0:",":z0:",":w0:") ":;
+print "(":x1:",":y1:",":z1:",":w1:") ":;
+print "(":x2:",":y2:",":z2:",":w2:") ":;
+print "(":x3:",":y3:",":z3:",":w3:") ":;
+print "(":x4:",":y4:",":z4:",":w4:") ":;
+print "(":x5:",":y5:",":z5:",":w5:") ":;
+
+/*
+ *
+ * Given the 5 points:
+ *
+ * 	(x0,y1,z1,w1)
+ * 	(x1,y1,z1,w1)
+ * 	(x2,y2,z2,w2)
+ * 	(x3,y3,z3,w3)
+ * 	(x4,y4,z4,w4)
+ * 	(x5,y5,z5,w5)
+ *
+ * we can determine if they lie in the surface of 4D sphere in R^4 if the
+ * following matrix is 0:
+ *
+ * 	| x0^2+y0^2+z0^2+w0^2	x0	y0	z0	w0	1 |
+ * 	| x1^2+y1^2+z1^2+w1^2	x1	y1	z1	w1	1 |
+ * 	| x2^2+y2^2+z2^2+w2^2	x2	y2	z2	w2	1 |	= 0
+ * 	| x3^2+y3^2+z3^2+w3^2	x3	y3	z3	w3	1 |
+ * 	| x4^2+y4^2+z4^2+w4^2	x4	y4	z4	w4	1 |
+ * 	| x5^2+y5^2+z5^2+w5^2	x5	y5	z5	w5	1 |
+ */
+if ((w0*(-x1*(-y2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    +y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +y5*(z4^2+y4^2+x4^2+w4^2) + (y4-y5)*(z3^2+y3^2+x3^2+w3^2))
+    -z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z2^2+y2^2+x2^2+w2^2)*(y4*z5+y3*(z4-z5) -y5*z4- (y4-y5)*z3) -
+    (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4)) +y1*(-x2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    +x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +x5*(z4^2+y4^2+x4^2+w4^2)
+    + (x4-x5)*(z3^2+y3^2+x3^2+w3^2)) -z3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) + (z2^2+y2^2+x2^2+w2^2)*(x4*z5+x3*(z4-z5)
+    -x5*z4- (x4-x5)*z3) - (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4))
+    -x2*(-y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4))
+    +y2*(-x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4)) -z1*(-x2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +y5*(z4^2+y4^2+x4^2+w4^2)
+    + (y4-y5)*(z3^2+y3^2+x3^2+w3^2)) +x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +x5*(z4^2+y4^2+x4^2+w4^2) + (x4-x5)*(z3^2+y3^2+x3^2+w3^2))
+    -y3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) -
+    (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2) + (x4*y5+x3*(y4-y5) -x5*y4-
+    (x4-x5)*y3)*(z2^2+y2^2+x2^2+w2^2)) -z2*(-x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) + (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2))
+    + (z1^2+y1^2+x1^2+w1^2)*(x2*(y4*z5+y3*(z4-z5) -y5*z4-
+    (y4-y5)*z3) -x3*(y4*z5-y5*z4) -y2*(x4*z5+x3*(z4-z5) -x5*z4-
+    (x4-x5)*z3) +y3*(x4*z5-x5*z4) - (x4*y5-x5*y4)*z3+
+    (x4*y5+x3*(y4-y5) -x5*y4- (x4-x5)*y3)*z2) +
+    (z2^2+y2^2+x2^2+w2^2)*(x3*(y4*z5-y5*z4) -y3*(x4*z5-x5*z4) +
+    (x4*y5-x5*y4)*z3)) -x0*(-w1*(-y2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    +y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +y5*(z4^2+y4^2+x4^2+w4^2) + (y4-y5)*(z3^2+y3^2+x3^2+w3^2))
+    -z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z2^2+y2^2+x2^2+w2^2)*(y4*z5+y3*(z4-z5) -y5*z4- (y4-y5)*z3) -
+    (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4)) -y1*(w2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    -w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +w5*(z4^2+y4^2+x4^2+w4^2)
+    + (w4-w5)*(z3^2+y3^2+x3^2+w3^2)) +z3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (z2^2+y2^2+x2^2+w2^2)*(-w4*z5-w3*(z4-z5)
+    +w5*z4+ (w4-w5)*z3) - (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5))
+    -w2*(-y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4))
+    -y2*(w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5)) +z1*(w2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +y5*(z4^2+y4^2+x4^2+w4^2)
+    + (y4-y5)*(z3^2+y3^2+x3^2+w3^2)) -w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +w5*(z4^2+y4^2+x4^2+w4^2) + (w4-w5)*(z3^2+y3^2+x3^2+w3^2))
+    +y3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) -
+    (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2) + (-w4*y5-w3*(y4-y5) +w5*y4+
+    (w4-w5)*y3)*(z2^2+y2^2+x2^2+w2^2)) +z2*(w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2))
+    + (z1^2+y1^2+x1^2+w1^2)*(w2*(y4*z5+y3*(z4-z5) -y5*z4-
+    (y4-y5)*z3) -w3*(y4*z5-y5*z4) +y2*(-w4*z5-w3*(z4-z5)
+    +w5*z4+ (w4-w5)*z3) -y3*(w5*z4-w4*z5) + (w5*y4-w4*y5)*z3-
+    (-w4*y5-w3*(y4-y5) +w5*y4+ (w4-w5)*y3)*z2) +
+    (z2^2+y2^2+x2^2+w2^2)*(w3*(y4*z5-y5*z4) +y3*(w5*z4-w4*z5) -
+    (w5*y4-w4*y5)*z3)) +y0*(-w1*(-x2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    +x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +x5*(z4^2+y4^2+x4^2+w4^2) + (x4-x5)*(z3^2+y3^2+x3^2+w3^2))
+    -z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z2^2+y2^2+x2^2+w2^2)*(x4*z5+x3*(z4-z5) -x5*z4- (x4-x5)*z3) -
+    (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4)) -x1*(w2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    -w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +w5*(z4^2+y4^2+x4^2+w4^2)
+    + (w4-w5)*(z3^2+y3^2+x3^2+w3^2)) +z3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (z2^2+y2^2+x2^2+w2^2)*(-w4*z5-w3*(z4-z5)
+    +w5*z4+ (w4-w5)*z3) - (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5))
+    -w2*(-x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4))
+    -x2*(w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5)) +z1*(w2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +x5*(z4^2+y4^2+x4^2+w4^2)
+    + (x4-x5)*(z3^2+y3^2+x3^2+w3^2)) -w3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) -x2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +w5*(z4^2+y4^2+x4^2+w4^2) + (w4-w5)*(z3^2+y3^2+x3^2+w3^2))
+    +x3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) -
+    (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2) + (-w4*x5-w3*(x4-x5) +w5*x4+
+    (w4-w5)*x3)*(z2^2+y2^2+x2^2+w2^2)) +z2*(w3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) -x3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2)) +
+    (z1^2+y1^2+x1^2+w1^2)*(w2*(x4*z5+x3*(z4-z5) -x5*z4- (x4-x5)*z3)
+    -w3*(x4*z5-x5*z4) +x2*(-w4*z5-w3*(z4-z5) +w5*z4+ (w4-w5)*z3)
+    -x3*(w5*z4-w4*z5) + (w5*x4-w4*x5)*z3- (-w4*x5-w3*(x4-x5) +w5*x4+
+    (w4-w5)*x3)*z2) + (z2^2+y2^2+x2^2+w2^2)*(w3*(x4*z5-x5*z4)
+    +x3*(w5*z4-w4*z5) - (w5*x4-w4*x5)*z3))
+    -w1*(-x2*(-y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4))
+    +y2*(-x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4)) -z2*(-x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) + (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2))
+    + (z2^2+y2^2+x2^2+w2^2)*(x3*(y4*z5-y5*z4)
+    -y3*(x4*z5-x5*z4) + (x4*y5-x5*y4)*z3))
+    +x1*(-w2*(-y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4))
+    -y2*(w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5)) +z2*(w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2))
+    + (z2^2+y2^2+x2^2+w2^2)*(w3*(y4*z5-y5*z4)
+    +y3*(w5*z4-w4*z5) - (w5*y4-w4*y5)*z3))
+    -y1*(-w2*(-x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4))
+    -x2*(w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5)) +z2*(w3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) -x3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2))
+    + (z2^2+y2^2+x2^2+w2^2)*(w3*(x4*z5-x5*z4) +x3*(w5*z4-w4*z5)
+    - (w5*x4-w4*x5)*z3)) -z0*(-w1*(-x2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +y5*(z4^2+y4^2+x4^2+w4^2)
+    + (y4-y5)*(z3^2+y3^2+x3^2+w3^2)) +x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +x5*(z4^2+y4^2+x4^2+w4^2) + (x4-x5)*(z3^2+y3^2+x3^2+w3^2))
+    -y3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) -
+    (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2) + (x4*y5+x3*(y4-y5) -x5*y4-
+    (x4-x5)*y3)*(z2^2+y2^2+x2^2+w2^2)) -x1*(w2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +y5*(z4^2+y4^2+x4^2+w4^2)
+    + (y4-y5)*(z3^2+y3^2+x3^2+w3^2)) -w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +w5*(z4^2+y4^2+x4^2+w4^2) + (w4-w5)*(z3^2+y3^2+x3^2+w3^2))
+    +y3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) -
+    (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2) + (-w4*y5-w3*(y4-y5) +w5*y4+
+    (w4-w5)*y3)*(z2^2+y2^2+x2^2+w2^2)) -w2*(-x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) + (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2))
+    -x2*(w3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    -y3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2)) +y1*(w2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +x5*(z4^2+y4^2+x4^2+w4^2)
+    + (x4-x5)*(z3^2+y3^2+x3^2+w3^2)) -w3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) -x2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +w5*(z4^2+y4^2+x4^2+w4^2)
+    + (w4-w5)*(z3^2+y3^2+x3^2+w3^2)) +x3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) - (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2)
+    + (-w4*x5-w3*(x4-x5) +w5*x4+ (w4-w5)*x3)*(z2^2+y2^2+x2^2+w2^2))
+    +y2*(w3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2))
+    -x3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2)) + (w3*(x4*y5-x5*y4) +x3*(w5*y4-w4*y5)
+    - (w5*x4-w4*x5)*y3)*(z2^2+y2^2+x2^2+w2^2) + (w2*(x4*y5+x3*(y4-y5)
+    -x5*y4- (x4-x5)*y3) -w3*(x4*y5-x5*y4) +x2*(-w4*y5-w3*(y4-y5)
+    +w5*y4+ (w4-w5)*y3) -x3*(w5*y4-w4*y5) + (w5*x4-w4*x5)*y3-
+    (-w4*x5-w3*(x4-x5) +w5*x4+ (w4-w5)*x3)*y2)*(z1^2+y1^2+x1^2+w1^2))
+    +z1*(-w2*(-x3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    +y3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) +
+    (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2)) -x2*(w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2))
+    +y2*(w3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2))
+    -x3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2)) + (w3*(x4*y5-x5*y4)
+    +x3*(w5*y4-w4*y5) - (w5*x4-w4*x5)*y3)*(z2^2+y2^2+x2^2+w2^2)) +
+    (z0^2+y0^2+x0^2+w0^2)*(-w1*(x2*(y4*z5+y3*(z4-z5) -y5*z4- (y4-y5)*z3)
+    -x3*(y4*z5-y5*z4) -y2*(x4*z5+x3*(z4-z5) -x5*z4- (x4-x5)*z3)
+    +y3*(x4*z5-x5*z4) - (x4*y5-x5*y4)*z3+ (x4*y5+x3*(y4-y5) -x5*y4-
+    (x4-x5)*y3)*z2) +x1*(w2*(y4*z5+y3*(z4-z5) -y5*z4- (y4-y5)*z3)
+    -w3*(y4*z5-y5*z4) +y2*(-w4*z5-w3*(z4-z5) +w5*z4+ (w4-w5)*z3)
+    -y3*(w5*z4-w4*z5) + (w5*y4-w4*y5)*z3- (-w4*y5-w3*(y4-y5) +w5*y4+
+    (w4-w5)*y3)*z2) -w2*(x3*(y4*z5-y5*z4) -y3*(x4*z5-x5*z4) +
+    (x4*y5-x5*y4)*z3) +x2*(w3*(y4*z5-y5*z4) +y3*(w5*z4-w4*z5) -
+    (w5*y4-w4*y5)*z3) -y1*(w2*(x4*z5+x3*(z4-z5) -x5*z4- (x4-x5)*z3)
+    -w3*(x4*z5-x5*z4) +x2*(-w4*z5-w3*(z4-z5) +w5*z4+ (w4-w5)*z3)
+    -x3*(w5*z4-w4*z5) + (w5*x4-w4*x5)*z3- (-w4*x5-w3*(x4-x5) +w5*x4+
+    (w4-w5)*x3)*z2) -y2*(w3*(x4*z5-x5*z4) +x3*(w5*z4-w4*z5) -
+    (w5*x4-w4*x5)*z3) + (w3*(x4*y5-x5*y4) +x3*(w5*y4-w4*y5) -
+    (w5*x4-w4*x5)*y3)*z2+ (w2*(x4*y5+x3*(y4-y5) -x5*y4- (x4-x5)*y3)
+    -w3*(x4*y5-x5*y4) +x2*(-w4*y5-w3*(y4-y5) +w5*y4+ (w4-w5)*y3)
+    -x3*(w5*y4-w4*y5) + (w5*x4-w4*x5)*y3- (-w4*x5-w3*(x4-x5) +w5*x4+
+    (w4-w5)*x3)*y2)*z1) - (z1^2+y1^2+x1^2+w1^2)*(-w2*(x3*(y4*z5-y5*z4)
+    -y3*(x4*z5-x5*z4) + (x4*y5-x5*y4)*z3) +x2*(w3*(y4*z5-y5*z4)
+    +y3*(w5*z4-w4*z5) - (w5*y4-w4*y5)*z3) -y2*(w3*(x4*z5-x5*z4)
+    +x3*(w5*z4-w4*z5) - (w5*x4-w4*x5)*z3) + (w3*(x4*y5-x5*y4)
+    +x3*(w5*y4-w4*y5) - (w5*x4-w4*x5)*y3)*z2)) == 0) {
+    print "are in the surface of a 4D sphere";
+} else {
+    print "are NOT on a 4D sphere surface";
+}

cscript/Makefile

@@ -17,8 +17,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.9 $
-# @(#) $Id: Makefile,v 29.9 2001/04/08 10:53:52 chongo Exp $
+# @(#) $Revision: 29.22 $
+# @(#) $Id: Makefile,v 29.22 2002/03/14 00:28:28 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/Makefile,v $
 #
 # Under source code control:	1999/11/29 11:10:26
@@ -36,15 +36,121 @@
 SHELL= /bin/sh
 MAKE_FILE = Makefile
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
+####
+
+# Where the system include (.h) files are kept
 #
-BINDIR= /usr/local/bin
-#BINDIR= /usr/bin
-#BINDIR= /usr/contrib/bin
+# For DJGPP, select:
 #
+#	INCDIR= /dev/env/DJDIR/include
+#
+# If in doubt, set:
+#
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
 SCRIPTDIR= ${BINDIR}/cscript
 
+# T - top level directory under which calc will be installed
+#
+# The calc install is performed under $T, the calc build is
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
+#
+# If $T is empty, calc is installed under /, which is the same
+# top of tree for which it was built.  If $T is non-empty, then
+# calc is installed under $T, as if one had to chroot under
+# $T for calc to operate.
+#
+# If in doubt, use T=
+#
+T=
+
 # Makefile debug
 #
 # Q=@	do not echo internal makefile actions (quiet mode)
@@ -59,6 +165,7 @@ CHMOD= chmod
 SED= sed
 SORT= sort
 FMT= fmt
+CMP= cmp
 
 # The ${SCRIPT} list is the list of calc shell script files (without the .calc
 # extension) which will be installed.
@@ -76,10 +183,11 @@ FMT= fmt
 #
 #		make detaillist
 #
-SCRIPT= mersenne piforever plus simple square fproduct
+SCRIPT= 4dsphere fproduct mersenne piforever plus powerterm \
+	simple square
 
-SCRIPT_SRC= mersenne.calc piforever.calc plus.calc simple.calc square.calc \
-	fproduct.calc
+SCRIPT_SRC= 4dsphere.calc fproduct.calc mersenne.calc \
+	piforever.calc plus.calc powerterm.calc simple.calc square.calc
 
 # These files are found (but not built) in the distribution
 #
@@ -89,9 +197,17 @@ DISTLIST= ${SCRIPT_SRC} ${MAKE_FILE} README
 #
 CALCLIBLIST=
 
+# complete list of targets
+#
+# NOTE: This list MUST be co-ordinated with the ${CSCRIPT_TARGETS} variable
+#	in the upper level ../Makefile
+#
+CSCRIPT_TARGETS= ${SCRIPT}
+TARGETS= ${CSCRIPT_TARGETS}
+
 # The reason for this Makefile
 #
-all: ${SCRIPT} ${SCRIPT_SRC} .all
+all: ${TARGETS} .all
 
 # used by the upper level Makefile to determine if we have done all
 #
@@ -113,8 +229,10 @@ all: ${SCRIPT} ${SCRIPT_SRC} .all
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q}for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo cscript/$$i; \
+	    fi; \
 	done | LANG=C ${SORT}
 
 distdir:
@@ -126,23 +244,27 @@ calcliblist:
 #
 detaillist:
 	${Q}-(echo "xxxxxxx"; \
-	   for i in ${SCRIPT}; do \
+	   for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		if [ ! -f RCS/$$i.calc,v ]; then \
 		    echo "WARNING: $$i.calc not under RCS control" 1>&2; \
 		else \
 		    echo $$i; \
 		fi; \
+	    fi; \
 	done | LANG=C ${SORT}) | ${FMT} -70 | \
 	    ${SED} -e '1s/xxxxxxx/SCRIPT=/' -e '2,$$s/^/	/' \
 		   -e 's/$$/ \\/' -e '$$s/ \\$$//'
 	${Q}echo
 	${Q}-(echo "xxxxxxxxxxx"; \
-	   for i in ${SCRIPT}; do \
+	   for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		if [ ! -f RCS/$$i.calc,v ]; then \
 		    echo "WARNING: $$i.calc not under RCS control" 1>&2; \
 		else \
 		    echo $$i.calc; \
 		fi; \
+	    fi; \
 	done | LANG=C ${SORT}) | ${FMT} -70 | \
 	    ${SED} -e '1s/xxxxxxxxxxx/SCRIPT_SRC=/' -e '2,$$s/^/	/' \
 		   -e 's/$$/ \\/' -e '$$s/ \\$$//'
@@ -171,11 +293,13 @@ depend:
 	${Q}echo "# DO NOT DELETE THIS LINE -- make depend depends on it." > \
 		makedep.out
 	${Q}echo "" >> makedep.out
-	${Q}for i in ${SCRIPT}; do \
+	${Q}for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo "$$i: $$i.calc"; \
 		echo '	rm -f $$@'; \
 		echo '	$${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!$${BINDIR}/calc:" $$?>$$@'; \
 		echo '	$${CHMOD} +x $$@'; \
+	    fi; \
 	done >> makedep.out
 	${Q}echo sample dependency list formed
 	${Q}echo forming new cscript/Makefile
@@ -185,7 +309,7 @@ depend:
 	${Q}echo "" >> Makefile
 	${Q}${SED} -n '3,$$p' makedep.out >> Makefile
 	-${Q}rm -f makedep.out
-	-${Q}if cmp -s Makefile.bak Makefile; then \
+	-${Q}if ${CMP} -s Makefile.bak Makefile; then \
 		echo 'sample Makefile was already up to date'; \
 		mv -f Makefile.bak Makefile; \
 	else \
@@ -200,36 +324,81 @@ depend:
 		fi; \
 	fi
 
+##
+#
+# rpm rules
+#
+##
+
+echo_inst_files:
+	${Q}for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${SCRIPTDIR}/$$i; \
+	    fi; \
+	done
+
+##
+#
+# Utility rules
+#
+##
+
 clean:
 	-rm -f makedep.out
 
 clobber:
-	-rm -f ${SCRIPT}
+	-rm -f ${TARGETS}
 
 install: all
-	-${Q}if [ ! -d ${BINDIR} ]; then \
-		echo mkdir ${BINDIR}; \
-		mkdir ${BINDIR}; \
+	-${Q}if [ ! -d $T${BINDIR} ]; then \
+	    echo mkdir $T${BINDIR}; \
+	    mkdir $T${BINDIR}; \
+	    if [ ! -d "$T${BINDIR}" ]; then \
+		echo mkdir -p "$T${BINDIR}"; \
+		mkdir -p "$T${BINDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${BINDIR}; \
+	    ${CHMOD} 0755 $T${BINDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${SCRIPTDIR} ]; then \
-		echo mkdir ${SCRIPTDIR}; \
-		mkdir ${SCRIPTDIR}; \
+	-${Q}if [ ! -d $T${SCRIPTDIR} ]; then \
+	    echo mkdir $T${SCRIPTDIR}; \
+	    mkdir $T${SCRIPTDIR}; \
+	    if [ ! -d "$T${SCRIPTDIR}" ]; then \
+		echo mkdir -p "$T${SCRIPTDIR}"; \
+		mkdir -p "$T${SCRIPTDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${SCRIPTDIR}; \
+	    ${CHMOD} 0755 $T${SCRIPTDIR}; \
 	else \
 	    true; \
 	fi
-	${Q}for i in ${SCRIPT}; do \
-		echo rm -f ${SCRIPTDIR}/$$i; \
-		rm -f ${SCRIPTDIR}/$$i; \
-		echo cp $$i ${SCRIPTDIR}; \
-		cp $$i ${SCRIPTDIR}; \
-		echo ${CHMOD} 0555 ${SCRIPTDIR}/$$i; \
-		${CHMOD} 0555 ${SCRIPTDIR}/$$i; \
+	${Q}for i in ${SCRIPT} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s $$i $T${SCRIPTDIR}/$$i; then \
+		true; \
+	    else \
+		rm -f $T${SCRIPTDIR}/$$i.new; \
+		cp -f $$i $T${SCRIPTDIR}/$$i.new; \
+		${CHMOD} 0555 $T${SCRIPTDIR}/$$i.new; \
+		mv -f $T${SCRIPTDIR}/$$i.new $T${SCRIPTDIR}/$$i; \
+		echo "installed $T${SCRIPTDIR}/$$i"; \
+	    fi; \
 	done
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.
 
+4dsphere: 4dsphere.calc
+	rm -f $@
+	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	${CHMOD} +x $@
+fproduct: fproduct.calc
+	rm -f $@
+	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	${CHMOD} +x $@
 mersenne: mersenne.calc
 	rm -f $@
 	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
@@ -242,6 +411,10 @@ plus: plus.calc
 	rm -f $@
 	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
 	${CHMOD} +x $@
+powerterm: powerterm.calc
+	rm -f $@
+	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	${CHMOD} +x $@
 simple: simple.calc
 	rm -f $@
 	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
@@ -250,7 +423,3 @@ square: square.calc
 	rm -f $@
 	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
 	${CHMOD} +x $@
-fproduct: fproduct.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@

cscript/README

@@ -19,6 +19,18 @@ For more info, see:
 
 =-=
 
+4dsphere
+
+    Determine if 6 points lie on the surface of a 4-dimensional sphere in R^4.
+
+    4dsphere x0 y0 z0 w0   x1 y1 z1 w1   ...   x5 y5 z5 w5
+
+	x0 y0 z0 w0     point 0 in R^4
+	x1 y1 z1 w1     point 1 in R^4
+	...             ...
+	x5 y5 z5 w5     point 5 in R^4
+
+
 fproduct filename term ...
 
     Write the big Endian product of terms to a file.  Use - for stdout.
@@ -39,6 +51,12 @@ plus arg ...
     Print the sum of 1 or more arguments.
 
 
+powerterm [base_limit] value
+
+    Print the value as a sum (or difference) of powers of integers up
+    to and including powers <= base_limit.  By default, base_limit is 10000.
+
+
 simple
 
     A trivial example of a calc shell script.
@@ -59,8 +77,8 @@ simple
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.5 $
-## @(#) $Id: README,v 29.5 2001/04/08 08:24:40 chongo Exp $
+## @(#) $Revision: 29.10 $
+## @(#) $Id: README,v 29.10 2001/06/10 19:34:40 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/README,v $
 ##
 ## Under source code control:	1999/12/17 10:23:40

cscript/fproduct.calc

@@ -1,4 +1,4 @@
-#!/usr/local/bin/calc -q -s -f
+#!/usr/local/src/cmd/calc/calc -q -s -f
 /*
  * fproduct - write the big Endian product of terms to a file
  *
@@ -24,8 +24,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: fproduct.calc,v 29.1 2001/04/08 08:25:15 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: fproduct.calc,v 29.2 2001/06/06 09:06:29 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/fproduct.calc,v $
  *
  * Under source code control:   2001/04/07 20:13:11

cscript/powerterm.calc

@@ -0,0 +1,185 @@
+#!/usr/local/src/cmd/calc/calc -q -s -f
+/*
+ * powerterm - print the argument as a sum of powers of integers
+ *
+ * usage:
+ *      powerterm [base_limit] value
+ *
+ *	base_limit	largest base we will consider (def: 10000)
+ *      value		value to convert into sums of powers of integers
+ *
+ * Copyright (C) 2001  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the powerterm of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: powerterm.calc,v 29.6 2001/06/06 09:06:29 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/powerterm.calc,v $
+ *
+ * Under source code control:   2001/04/24 23:49:11
+ * File existed as early as:    2001
+ *
+ * chongo <was here> /\oo/\     http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)        http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+/*
+ * parse args
+ */
+config("verbose_quit", 0),;
+base_lim = 10000;		/* default: highest base we will consider */
+if (argv() < 2 || argv() > 3) {
+    fprintf(files(2), "usage: %s [base_limit] value\n", argv(0));
+    exit;
+}
+if (argv() == 3) {
+    x = eval(argv(2));
+    base_lim = eval(argv(1));
+} else {
+    x = eval(argv(1));
+}
+if (! isint(x)) {
+    fprintf(files(2), "%s: value must be an integer\n");
+    exit;
+}
+if (! isint(base_lim)) {
+    fprintf(files(2), "%s: base limit must be an integer\n");
+    exit;
+}
+if (base_lim <= 1) {
+    fprintf(files(2), "%s: base limit is too small\n");
+    exit;
+}
+++base_lim;
+
+/*
+ * setup loop variables
+ */
+term = 0;			/* number of powerterm found */
+
+/*
+ * log constants
+ */
+if (base_lim <= 2^20+1) {		/* 2^20 requires ~96 Megs of memory */
+    mat lni[base_lim];			/* log of integers */
+    for (i=2; i < base_lim; ++i) {
+	lni[i] = ln(i);
+    }
+    have_lni = 1;			/* have lni[x] array */
+} else {
+    mat lni[1];				/* not used */
+    have_lni = 0;			/* base_lim too large for array */
+}
+
+/*
+ * remove nestest powers
+ */
+while (abs(x) >= base_lim) {
+
+    /*
+     * look for the nearest power
+     */
+    lnx = ln(abs(x));			/* log of the remaining co-factor */
+    closest = 0.5;
+    base = 1;
+    exponent = 0;
+    if (have_lni) {
+
+	/*
+	 * use pre-calculated log array when looking for the nearest power
+	 */
+	for (i = 2; i < base_lim; ++i) {
+
+	    /*
+	     * determine exponent closeness to an integer
+	     */
+	    ex = lnx / lni[i];
+	    power = int(ex + 0.5);
+	    diff = ex - power;
+
+	    /*
+	     * look for a closer power
+	     */
+	    if (abs(diff) < closest) {
+		closest = abs(diff);
+		base = i;
+		exponent = power;
+	    }
+	}
+
+    } else {
+
+	/*
+	 * re-calculate logs when looking for the nearest power
+	 */
+	for (i = 2; i < base_lim; ++i) {
+
+	    /*
+	     * determine exponent closeness to an integer
+	     */
+	    ex = lnx / ln(i);
+	    power = int(ex + 0.5);
+	    diff = ex - power;
+
+	    /*
+	     * look for a closer power
+	     */
+	    if (abs(diff) < closest) {
+		closest = abs(diff);
+		base = i;
+		exponent = power;
+	    }
+	}
+    }
+
+    /*
+     * output current term and then subtract it
+     */
+    if (x != 0) {
+	if (x < 0) {
+	    print "-",;
+	} else if (term > 0) {
+	    print "+",;
+	}
+	if (exponent > 1) {
+	    print base: "^": exponent,;
+	} else {
+	    print base,;
+	}
+    }
+
+    /*
+     * subtract (or add) this near power
+     */
+    if (x < 0) {
+	x = x + base^exponent;
+    } else {
+	x = x - base^exponent;
+    }
+    ++term;
+}
+
+/*
+ * print the final term
+ */
+if (x < 0) {
+    print "-", -x;
+} else if (x > 0) {
+    print "+", x;
+} else {
+    print "";
+}
+exit;

custom/Makefile

@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.6 $
-# @(#) $Id: Makefile,v 29.6 2001/04/08 10:53:52 chongo Exp $
+# @(#) $Revision: 29.19 $
+# @(#) $Id: Makefile,v 29.19 2002/03/14 00:28:28 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/Makefile,v $
 #
 # Under source code control:	1997/03/09 02:28:54
@@ -88,26 +88,120 @@ CUSTOM_OBJ= c_argv.o c_devnull.o c_help.o c_sysinfo.o c_pzasusb8.o
 #Q=
 Q=@
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
+####
+
+# Where the system include (.h) files are kept
 #
-# where to install things
+# For DJGPP, select:
 #
-# ${TOPDIR} is the directory under which the calc directory will be placed.
-# ${LIBDIR} is where the *.cal, *.h, *.a, bindings and help dir are installed.
-# ${HELPDIR} is where the help directory is installed.
-# ${CUSTOMLIBDIR} is where custom lib files are installed.
-# ${CUSTOMHELPDIR} is where custom help files are installed.
+#	INCDIR= /dev/env/DJDIR/include
 #
-TOPDIR= /usr/local/lib
-#TOPDIR= /usr/lib
-#TOPDIR= /usr/libdata
-#TOPDIR= /usr/contrib/lib
+# If in doubt, set:
 #
-LIBDIR= ${TOPDIR}/calc
-HELPDIR= ${LIBDIR}/help
-CUSTOMLIBDIR= ${LIBDIR}/custom
-CUSTOMHELPDIR= ${HELPDIR}/custhelp
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
+SCRIPTDIR= ${BINDIR}/cscript
+
+# T - top level directory under which calc will be installed
+#
+# The calc install is performed under $T, the calc build is
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
+#
+# If $T is empty, calc is installed under /, which is the same
+# top of tree for which it was built.  If $T is non-empty, then
+# calc is installed under $T, as if one had to chroot under
+# $T for calc to operate.
+#
+# If in doubt, use T=
+#
+T=
 
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
@@ -256,7 +350,7 @@ REQUIRED_SRC= custtbl.c
 #
 REQUIRED_OBJ= custtbl.o
 
-# These .h files are installed under ${CUSTOMLIBDIR} by the install rule.
+# These .h files are installed under ${CUSTOMCALDIR} by the install rule.
 #
 INSTALL_H_SRC= ${CUSTOM_H_SRC}
 
@@ -288,9 +382,13 @@ DISTLIST= ${CUSTCALC_SRC} ${CUSTOM_CALC_FILES} ${CUSTOM_HELP} \
 #
 CALCLIBLIST= ${CUSTCALC_SRC} ${INSTALL_H_SRC} ${MAKE_FILE} HOW_TO_ADD
 
+# This is the custom .a link library that is build
+#
+CALC_LIBCUSTOM= libcustcalc.a
+
 # complete list of targets
 #
-TARGETS= libcustcalc.a ${CUSTCALC_OBJ}
+TARGETS= ${CALC_LIBCUSTOM} ${CUSTCALC_OBJ}
 
 # required vars
 #
@@ -303,6 +401,7 @@ SED= sed
 MAKEDEPEND= makedepend
 CHMOD= chmod
 SORT= sort
+CMP= cmp
 
 ##
 #
@@ -313,7 +412,7 @@ SORT= sort
 all: ${TARGETS} ${INSTALL_H_SRC} ${CUSTOM_CALC_FILES} \
 	${CUSTOM_HELP} ${MAKE_FILE} .all
 
-libcustcalc.a: ${CUSTCALC_OBJ} ${MAKE_FILE} ../Makefile
+libcustcalc.a: ${CUSTCALC_OBJ} ${MAKE_FILE} ../${MAKE_FILE}
 	-rm -f libcustcalc.a
 	ar qc libcustcalc.a ${CUSTCALC_OBJ}
 	${RANLIB} libcustcalc.a
@@ -353,8 +452,10 @@ c_sysinfo.o: c_sysinfo.c ${MAKE_FILE}
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q}for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo custom/$$i; \
+	    fi; \
 	done
 
 distdir:
@@ -390,11 +491,13 @@ depend:
 	-${Q}rm -rf skel
 	${Q}mkdir skel
 	${Q}mkdir skel/custom
-	-${Q}for i in ${C_SRC}; do \
+	-${Q}for i in ${C_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		${SED} -n '/^#[	 ]*include[	 ]*"/p' \
 		    "$$i" > "skel/custom/$$i"; \
+	    fi; \
 	done
-	-${Q}for i in /dev/null ${H_SRC}; do \
+	-${Q}for i in ${H_SRC} /dev/null; do \
 		if [ "$$i" = "/dev/null" ]; then \
 		    continue; \
 		fi; \
@@ -409,7 +512,10 @@ depend:
 	${Q}for i in `cd ..; ${MAKE} h_list 2>&1 | \
 			     ${SED} -e '/Entering directory/d' \
 				    -e '/Nothing to be done/d' \
-				    -e '/Leaving directory/d'`; do \
+				    -e '/Leaving directory/d'` /dev/null; do \
+		if [ "$$i" = "/dev/null" ]; then \
+		    continue; \
+		fi; \
 		tag="`echo $$i | ${SED} 's/[\.+,:]/_/g'`"; \
 		echo "#if !defined($$tag)" > "skel/$$i"; \
 		echo "#define $$tag" >> "skel/$$i"; \
@@ -422,9 +528,11 @@ depend:
 	${Q}echo forming custom dependency list
 	${Q}echo "# DO NOT DELETE THIS LINE -- make depend depends on it." > \
 	    skel/custom/makedep.out
-	${Q}cd skel/custom; ${MAKEDEPEND} -w 1 -m -f makedep.out ${C_SRC}
-	-${Q}for i in ${C_SRC}; do \
+	${Q}cd skel/custom; ${MAKEDEPEND} -w 1 -f makedep.out ${C_SRC}
+	-${Q}for i in ${C_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo "$$i" | ${SED} 's/^\(.*\)\.c/\1.o: \1.c/'; \
+	    fi; \
 	done >> skel/custom/makedep.out
 	${Q}echo custom dependency list formed
 	${Q}echo forming new custom/Makefile
@@ -435,7 +543,7 @@ depend:
 	${Q}${SED} -n '3,$$p' skel/custom/makedep.out | \
 		LANG=C ${SORT} -u >> Makefile
 	-${Q}rm -rf skel
-	-${Q}if cmp -s Makefile.bak Makefile; then \
+	-${Q}if ${CMP} -s Makefile.bak Makefile; then \
 		echo 'custom Makefile was already up to date'; \
 		mv -f Makefile.bak Makefile; \
 	else \
@@ -450,6 +558,34 @@ depend:
 		fi; \
 	fi
 
+##
+#
+# rpm rules
+#
+##
+
+echo_inst_files:
+	${Q}for i in ${INSTALL_H_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CUSTOMINCDIR}/$$i; \
+	    fi; \
+	done
+	${Q}for i in ${CUSTOM_HELP} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CUSTOMHELPDIR}/$$i; \
+	    fi; \
+	done
+	${Q}for i in ${CUSTOM_CALC_FILES} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CUSTOMCALDIR}/$$i; \
+	    fi; \
+	done
+	${Q}for i in ${CALC_LIBCUSTOM} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CUSTOMCALDIR}/$$i; \
+	    fi; \
+	done
+
 ##
 #
 # Utility rules
@@ -464,70 +600,145 @@ clobber:
 	rm -f .all Makefile.tmp Makefile.bak
 
 install: all
-	-${Q}if [ ! -d ${TOPDIR} ]; then \
-		echo mkdir ${TOPDIR}; \
-		mkdir ${TOPDIR}; \
+	-${Q}if [ ! -d $T${INCDIR} ]; then \
+	    echo mkdir $T${INCDIR}; \
+	    mkdir $T${INCDIR}; \
+	    if [ ! -d "$T${INCDIR}" ]; then \
+		echo mkdir -p "$T${INCDIR}"; \
+		mkdir -p "$T${INCDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${INCDIR}; \
+	    ${CHMOD} 0755 $T${INCDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${LIBDIR} ]; then \
-		echo mkdir ${LIBDIR}; \
-		mkdir ${LIBDIR}; \
+	-${Q}if [ ! -d $T${CALC_SHAREDIR} ]; then \
+	    echo mkdir $T${CALC_SHAREDIR}; \
+	    mkdir $T${CALC_SHAREDIR}; \
+	    if [ ! -d "$T${CALC_SHAREDIR}" ]; then \
+		echo mkdir -p "$T${CALC_SHAREDIR}"; \
+		mkdir -p "$T${CALC_SHAREDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
+	    ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${HELPDIR} ]; then \
-		echo mkdir ${HELPDIR}; \
-		mkdir ${HELPDIR}; \
+	-${Q}if [ ! -d $T${CALC_INCDIR} ]; then \
+	    echo mkdir $T${CALC_INCDIR}; \
+	    mkdir $T${CALC_INCDIR}; \
+	    if [ ! -d "$T${CALC_INCDIR}" ]; then \
+		echo mkdir -p "$T${CALC_INCDIR}"; \
+		mkdir -p "$T${CALC_INCDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CALC_INCDIR}; \
+	    ${CHMOD} 0755 $T${CALC_INCDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${CUSTOMLIBDIR} ]; then \
-		echo mkdir ${CUSTOMLIBDIR}; \
-		mkdir ${CUSTOMLIBDIR}; \
+	-${Q}if [ ! -d $T${HELPDIR} ]; then \
+	    echo mkdir $T${HELPDIR}; \
+	    mkdir $T${HELPDIR}; \
+	    if [ ! -d "$T${HELPDIR}" ]; then \
+		echo mkdir -p "$T${HELPDIR}"; \
+		mkdir -p "$T${HELPDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${HELPDIR}; \
+	    ${CHMOD} 0755 $T${HELPDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${CUSTOMHELPDIR} ]; then \
-		echo mkdir ${CUSTOMHELPDIR}; \
-		mkdir ${CUSTOMHELPDIR}; \
+	-${Q}if [ ! -d $T${CUSTOMCALDIR} ]; then \
+	    echo mkdir $T${CUSTOMCALDIR}; \
+	    mkdir $T${CUSTOMCALDIR}; \
+	    if [ ! -d "$T${CUSTOMCALDIR}" ]; then \
+		echo mkdir -p "$T${CUSTOMCALDIR}"; \
+		mkdir -p "$T${CUSTOMCALDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CUSTOMCALDIR}; \
+	    ${CHMOD} 0755 $T${CUSTOMCALDIR}; \
 	else \
 	    true; \
 	fi
-	${Q}for i in ${INSTALL_H_SRC} /dev/null; do \
-		if [ X$$i = X/dev/null ]; then continue; fi; \
-		echo rm -f ${CUSTOMLIBDIR}/$$i; \
-		rm -f ${CUSTOMLIBDIR}/$$i; \
-		echo cp $$i ${CUSTOMLIBDIR}; \
-		cp $$i ${CUSTOMLIBDIR}; \
-		echo ${CHMOD} 0444 ${CUSTOMLIBDIR}/$$i; \
-		${CHMOD} 0444 ${CUSTOMLIBDIR}/$$i; \
+	-${Q}if [ ! -d $T${CUSTOMHELPDIR} ]; then \
+	    echo mkdir $T${CUSTOMHELPDIR}; \
+	    mkdir $T${CUSTOMHELPDIR}; \
+	    if [ ! -d "$T${CUSTOMHELPDIR}" ]; then \
+		echo mkdir -p "$T${CUSTOMHELPDIR}"; \
+		mkdir -p "$T${CUSTOMHELPDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CUSTOMHELPDIR}; \
+	    ${CHMOD} 0755 $T${CUSTOMHELPDIR}; \
+	else \
+	    true; \
+	fi
+	-${Q}if [ ! -d $T${CUSTOMINCDIR} ]; then \
+	    echo mkdir $T${CUSTOMINCDIR}; \
+	    mkdir $T${CUSTOMINCDIR}; \
+	    if [ ! -d "$T${CUSTOMINCDIR}" ]; then \
+		echo mkdir -p "$T${CUSTOMINCDIR}"; \
+		mkdir -p "$T${CUSTOMINCDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CUSTOMINCDIR}; \
+	    ${CHMOD} 0755 $T${CUSTOMINCDIR}; \
+	else \
+	    true; \
+	fi
+	-${Q}for i in ${INSTALL_H_SRC} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s tmp $T${CUSTOMINCDIR}/$$i; then \
+		true; \
+	    else \
+		rm -f $T${CUSTOMINCDIR}/$$i.new; \
+		cp -f $$i $T${CUSTOMINCDIR}/$$i.new; \
+		${CHMOD} 0444 $T${CUSTOMINCDIR}/$$i.new; \
+		mv -f $T${CUSTOMINCDIR}/$$i.new $T${CUSTOMINCDIR}/$$i; \
+		echo "installed $T${CUSTOMINCDIR}/$$i"; \
+	    fi; \
 	done
-	${Q}for i in ${CUSTOM_CALC_FILES}; do \
-		echo rm -f ${CUSTOMLIBDIR}/$$i; \
-		rm -f ${CUSTOMLIBDIR}/$$i; \
-		echo cp $$i ${CUSTOMLIBDIR}; \
-		cp $$i ${CUSTOMLIBDIR}; \
-		echo ${CHMOD} 0444 ${CUSTOMLIBDIR}/$$i; \
-		${CHMOD} 0444 ${CUSTOMLIBDIR}/$$i; \
+	-${Q}rm -f tmp
+	-${Q}for i in ${CUSTOM_CALC_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s $$i $T${CUSTOMCALDIR}/$$i; then \
+		true; \
+	    else \
+		rm -f $T${CUSTOMCALDIR}/$$i.new; \
+		cp -f $$i $T${CUSTOMCALDIR}/$$i.new; \
+		${CHMOD} 0444 $T${CUSTOMCALDIR}/$$i.new; \
+		mv -f $T${CUSTOMCALDIR}/$$i.new $T${CUSTOMCALDIR}/$$i; \
+		echo "installed $T${CUSTOMCALDIR}/$$i"; \
+	    fi; \
 	done
-	${Q}for i in ${CUSTOM_HELP}; do \
-		echo rm -f ${CUSTOMHELPDIR}/$$i; \
-		rm -f ${CUSTOMHELPDIR}/$$i; \
-		echo cp $$i ${CUSTOMHELPDIR}; \
-		cp $$i ${CUSTOMHELPDIR}; \
-		echo ${CHMOD} 0444 ${CUSTOMHELPDIR}/$$i; \
-		${CHMOD} 0444 ${CUSTOMHELPDIR}/$$i; \
+	-${Q}for i in ${CUSTOM_HELP} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s $$i $T${CUSTOMHELPDIR}/$$i; then \
+		true; \
+	    else \
+		rm -f $T${CUSTOMHELPDIR}/$$i.new; \
+		cp -f $$i $T${CUSTOMHELPDIR}/$$i.new; \
+		${CHMOD} 0444 $T${CUSTOMHELPDIR}/$$i.new; \
+		mv -f $T${CUSTOMHELPDIR}/$$i.new $T${CUSTOMHELPDIR}/$$i; \
+		echo "installed $T${CUSTOMHELPDIR}/$$i"; \
+	    fi; \
 	done
 	-${Q}if [ ! -z ${ALLOW_CUSTOM} ]; then \
-		echo "rm -f ${CUSTOMLIBDIR}/libcustcalc.a"; \
-		rm -f ${CUSTOMLIBDIR}/libcustcalc.a; \
-		echo "cp libcustcalc.a ${CUSTOMLIBDIR}/libcustcalc.a"; \
-		cp libcustcalc.a ${CUSTOMLIBDIR}/libcustcalc.a; \
-		echo "${CHMOD} 0644 ${CUSTOMLIBDIR}/libcustcalc.a"; \
-		${CHMOD} 0644 ${CUSTOMLIBDIR}/libcustcalc.a; \
-		echo "${RANLIB} ${CUSTOMLIBDIR}/libcustcalc.a"; \
-		${RANLIB} ${CUSTOMLIBDIR}/libcustcalc.a; \
+	    if ${CMP} -s libcustcalc.a $T${CUSTOMCALDIR}/libcustcalc.a; then \
+		true; \
+	    else \
+		rm -f $T${CUSTOMCALDIR}/libcustcalc.a.new; \
+		cp -f libcustcalc.a $T${CUSTOMCALDIR}/libcustcalc.a.new; \
+		${CHMOD} 0644 $T${CUSTOMCALDIR}/libcustcalc.a.new; \
+		mv -f $T${CUSTOMCALDIR}/libcustcalc.a.new \
+		      $T${CUSTOMCALDIR}/libcustcalc.a; \
+		${RANLIB} $T${CUSTOMCALDIR}/libcustcalc.a; \
+		echo "installed $T${CUSTOMCALDIR}/libcustcalc.a"; \
+	    fi; \
 	fi
 
 ##
@@ -542,9 +753,8 @@ install: all
 c_argv.o: ../alloc.h
 c_argv.o: ../block.h
 c_argv.o: ../byteswap.h
-c_argv.o: ../calcerr.h
 c_argv.o: ../calc.h
-c_argv.o: c_argv.c
+c_argv.o: ../calcerr.h
 c_argv.o: ../cmath.h
 c_argv.o: ../config.h
 c_argv.o: ../custom.h
@@ -560,17 +770,17 @@ c_argv.o: ../longbits.h
 c_argv.o: ../md5.h
 c_argv.o: ../nametype.h
 c_argv.o: ../qmath.h
-c_argv.o: ../shs1.h
 c_argv.o: ../shs.h
+c_argv.o: ../shs1.h
 c_argv.o: ../string.h
 c_argv.o: ../value.h
 c_argv.o: ../win32dll.h
 c_argv.o: ../zmath.h
+c_argv.o: c_argv.c
 c_devnull.o: ../alloc.h
 c_devnull.o: ../block.h
 c_devnull.o: ../byteswap.h
 c_devnull.o: ../calcerr.h
-c_devnull.o: c_devnull.c
 c_devnull.o: ../cmath.h
 c_devnull.o: ../config.h
 c_devnull.o: ../custom.h
@@ -586,17 +796,17 @@ c_devnull.o: ../longbits.h
 c_devnull.o: ../md5.h
 c_devnull.o: ../nametype.h
 c_devnull.o: ../qmath.h
-c_devnull.o: ../shs1.h
 c_devnull.o: ../shs.h
+c_devnull.o: ../shs1.h
 c_devnull.o: ../string.h
 c_devnull.o: ../value.h
 c_devnull.o: ../win32dll.h
 c_devnull.o: ../zmath.h
+c_devnull.o: c_devnull.c
 c_help.o: ../alloc.h
 c_help.o: ../block.h
 c_help.o: ../byteswap.h
 c_help.o: ../calcerr.h
-c_help.o: c_help.c
 c_help.o: ../cmath.h
 c_help.o: ../config.h
 c_help.o: ../custom.h
@@ -612,19 +822,19 @@ c_help.o: ../longbits.h
 c_help.o: ../md5.h
 c_help.o: ../nametype.h
 c_help.o: ../qmath.h
-c_help.o: ../shs1.h
 c_help.o: ../shs.h
+c_help.o: ../shs1.h
 c_help.o: ../string.h
 c_help.o: ../value.h
 c_help.o: ../win32dll.h
 c_help.o: ../zmath.h
+c_help.o: c_help.c
 c_pzasusb8.o: ../alloc.h
 c_pzasusb8.o: ../block.h
 c_pzasusb8.o: ../byteswap.h
 c_pzasusb8.o: ../calcerr.h
 c_pzasusb8.o: ../cmath.h
 c_pzasusb8.o: ../config.h
-c_pzasusb8.o: c_pzasusb8.c
 c_pzasusb8.o: ../custom.h
 c_pzasusb8.o: ../endian_calc.h
 c_pzasusb8.o: ../hash.h
@@ -638,21 +848,21 @@ c_pzasusb8.o: ../longbits.h
 c_pzasusb8.o: ../md5.h
 c_pzasusb8.o: ../nametype.h
 c_pzasusb8.o: ../qmath.h
-c_pzasusb8.o: ../shs1.h
 c_pzasusb8.o: ../shs.h
+c_pzasusb8.o: ../shs1.h
 c_pzasusb8.o: ../string.h
 c_pzasusb8.o: ../value.h
 c_pzasusb8.o: ../win32dll.h
 c_pzasusb8.o: ../zmath.h
+c_pzasusb8.o: c_pzasusb8.c
 c_sysinfo.o: ../alloc.h
 c_sysinfo.o: ../block.h
 c_sysinfo.o: ../byteswap.h
-c_sysinfo.o: ../calcerr.h
 c_sysinfo.o: ../calc.h
+c_sysinfo.o: ../calcerr.h
 c_sysinfo.o: ../cmath.h
 c_sysinfo.o: ../conf.h
 c_sysinfo.o: ../config.h
-c_sysinfo.o: c_sysinfo.c
 c_sysinfo.o: ../custom.h
 c_sysinfo.o: ../endian_calc.h
 c_sysinfo.o: ../fposval.h
@@ -670,14 +880,15 @@ c_sysinfo.o: ../md5.h
 c_sysinfo.o: ../nametype.h
 c_sysinfo.o: ../prime.h
 c_sysinfo.o: ../qmath.h
-c_sysinfo.o: ../shs1.h
 c_sysinfo.o: ../shs.h
+c_sysinfo.o: ../shs1.h
 c_sysinfo.o: ../string.h
 c_sysinfo.o: ../value.h
 c_sysinfo.o: ../win32dll.h
 c_sysinfo.o: ../zmath.h
 c_sysinfo.o: ../zrand.h
 c_sysinfo.o: ../zrandom.h
+c_sysinfo.o: c_sysinfo.c
 custtbl.o: ../alloc.h
 custtbl.o: ../block.h
 custtbl.o: ../byteswap.h
@@ -685,7 +896,6 @@ custtbl.o: ../calcerr.h
 custtbl.o: ../cmath.h
 custtbl.o: ../config.h
 custtbl.o: ../custom.h
-custtbl.o: custtbl.c
 custtbl.o: ../endian_calc.h
 custtbl.o: ../hash.h
 custtbl.o: ../have_const.h
@@ -698,9 +908,10 @@ custtbl.o: ../longbits.h
 custtbl.o: ../md5.h
 custtbl.o: ../nametype.h
 custtbl.o: ../qmath.h
-custtbl.o: ../shs1.h
 custtbl.o: ../shs.h
+custtbl.o: ../shs1.h
 custtbl.o: ../string.h
 custtbl.o: ../value.h
 custtbl.o: ../win32dll.h
 custtbl.o: ../zmath.h
+custtbl.o: custtbl.c

custom/c_sysinfo.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.4 $
- * @(#) $Id: c_sysinfo.c,v 29.4 2000/07/17 15:37:12 chongo Exp $
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: c_sysinfo.c,v 29.5 2001/04/14 23:04:17 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/c_sysinfo.c,v $
  *
  * Under source code control:	1997/03/09 23:14:40
@@ -64,7 +64,7 @@ struct infoname {
 	FULL nmbr;	/* if str==NULL ==> value fo #define as a FULL */
 };
 static struct infoname sys_info[] = {
-    {"A55", "slots in an additive 55 table", NULL, (FULL)A55},
+    {"S100", "slots in an subtractive 100 table", NULL, (FULL)S100},
     {"BASE", "base for calculations", NULL, (FULL)BASE},
     {"BASE1", "one less than base", NULL, (FULL)BASE},
     {"BASEB", "bits in the calculation base", NULL, (FULL)BASEB},

file.h

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: file.h,v 29.3 2001/04/10 22:06:46 chongo Exp $
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: file.h,v 29.5 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/file.h,v $
  *
  * Under source code control:	1996/05/24 05:55:58
@@ -35,7 +35,11 @@
 #define __FILE_H__
 
 
-#include "have_fpos.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "have_fpos.h"
+#else
+# include <calc/have_fpos.h>
+#endif
 
 
 /*

func.c

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.9 $
- * @(#) $Id: func.c,v 29.9 2001/04/10 22:06:46 chongo Exp $
+ * @(#) $Revision: 29.10 $
+ * @(#) $Id: func.c,v 29.10 2001/05/29 00:41:22 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/func.c,v $
  *
  * Under source code control:	1990/02/15 01:48:15
@@ -7303,6 +7303,7 @@ f_free(int count, VALUE **vals)
 	return result;
 }
 
+
 static VALUE
 f_freeglobals(void)
 {
@@ -7316,6 +7317,7 @@ f_freeglobals(void)
 	return result;
 }
 
+
 static VALUE
 f_freeredc(void)
 {
@@ -7723,6 +7725,20 @@ f_argv(int count, VALUE **vals)
 }
 
 
+static VALUE
+f_version(void)
+{
+	VALUE result;
+
+	/* return the calc verstion string */
+	result.v_type = V_STR;
+	result.v_subtype = V_NOSUBTYPE;
+	result.v_str = makestring(strdup(version()));
+
+	return result;
+}
+
+
 #endif /* !FUNCLIST */
 
 
@@ -8325,6 +8341,8 @@ static CONST struct builtin builtins[] = {
 	 "truncate a to b number of decimal places"},
 	{"ungetc", 2, 2, 0, OP_NOP, 0, f_ungetc,
 	 "unget char read from file"},
+	{"version", 0, 0, 0, OP_NOP, 0, f_version,
+	 "calc version string"},
 	{"xor", 1, IN, 0, OP_NOP, 0, f_xor,
 	 "logical xor"},
 

func.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: func.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: func.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/func.h,v $
  *
  * Under source code control:	1990/02/15 01:48:33
@@ -32,8 +32,13 @@
 #define __FUNC_H__
 
 
-#include "calc.h"
-#include "label.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "calc.h"
+# include "label.h"
+#else
+# include <calc/calc.h>
+# include <calc/label.h>
+#endif
 
 
 /*

hash.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: hash.c,v 29.3 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: hash.c,v 29.4 2001/04/14 22:47:21 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/hash.c,v $
  *
  * Under source code control:	1995/11/23 05:13:11
@@ -911,6 +911,7 @@ hash_value(int type, void *v, HASH *state)
 			(USB8 *)value->v_rand->buffer, SLEN*FULL_BITS/8);
 		state = hash_int(type, value->v_rand->j, state);
 		state = hash_int(type, value->v_rand->k, state);
+		state = hash_int(type, value->v_rand->need_to_skip, state);
 		(state->update)(state,
 			(USB8 *)value->v_rand->slot, SCNT*FULL_BITS/8);
 		(state->update)(state,

hash.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: hash.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: hash.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/hash.h,v $
  *
  * Under source code control:	1995/11/14 23:57:45
@@ -33,10 +33,17 @@
 #define __HASH_H__
 
 
-#include "shs.h"
-#include "shs1.h"
-#include "md5.h"
-#include "zmath.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "shs.h"
+# include "shs1.h"
+# include "md5.h"
+# include "zmath.h"
+#else
+# include <calc/shs.h>
+# include <calc/shs1.h>
+# include <calc/md5.h>
+# include <calc/zmath.h>
+#endif
 
 
 /* MAX_CHUNKSIZE is the largest chunksize of any hash */

help/Makefile

@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.6 $
-# @(#) $Id: Makefile,v 29.6 2001/04/08 10:53:52 chongo Exp $
+# @(#) $Revision: 29.20 $
+# @(#) $Id: Makefile,v 29.20 2002/03/14 00:28:28 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/help/RCS/Makefile,v $
 #
 # Under source code control:	1991/07/23 06:47:57
@@ -36,15 +36,120 @@
 SHELL= /bin/sh
 MAKE_FILE = Makefile
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
-#
-TOPDIR= /usr/local/lib
-#TOPDIR= /usr/lib
-#TOPDIR= /usr/libdata
+####
 
-LIBDIR= ${TOPDIR}/calc
-HELPDIR= ${LIBDIR}/help
+# Where the system include (.h) files are kept
+#
+# For DJGPP, select:
+#
+#	INCDIR= /dev/env/DJDIR/include
+#
+# If in doubt, set:
+#
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
+SCRIPTDIR= ${BINDIR}/cscript
+
+# T - top level directory under which calc will be installed
+#
+# The calc install is performed under $T, the calc build is
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
+#
+# If $T is empty, calc is installed under /, which is the same
+# top of tree for which it was built.  If $T is non-empty, then
+# calc is installed under $T, as if one had to chroot under
+# $T for calc to operate.
+#
+# If in doubt, use T=
+#
+T=
 
 # Makefile debug
 #
@@ -63,6 +168,7 @@ CHMOD= chmod
 SED= sed
 SORT= sort
 FMT= fmt
+CMP= cmp
 
 # Standard and Builtin help files
 #
@@ -164,7 +270,7 @@ DETAIL_HELP= abs access acos acosh acot acoth acsc acsch address agd append \
 	runtime saveval scale scan scanf search sec sech seed segment select \
 	sgn sha sha1 sin sinh size sizeof sleep sort sqrt srand srandom \
 	ssq str strcat strerror strlen strpos strprintf strscan strscanf \
-	substr sum swap system tail tan tanh test time trunc xor
+	substr sum swap system tail tan tanh test time trunc version xor
 
 # This list is of files that are clones of DETAIL_HELP files.  They are
 # built from DETAIL_HELP files.
@@ -238,7 +344,8 @@ changes: ../CHANGES
 
 libcalc: ../LIBRARY
 	rm -f $@
-	${SED} -e 's:$${LIBDIR}:${LIBDIR}:g' < ../LIBRARY > $@
+	${SED} -e 's:$${LIBDIR}:${LIBDIR}:g' \
+	       -e 's:$${CALC_INCDIR}:${CALC_INCDIR}:g' < ../LIBRARY > $@
 	${CHMOD} 0444 $@
 	-@if [ -z "${Q}" ]; then \
 	    echo ''; \
@@ -389,11 +496,13 @@ full: ${FULL_HELP_FILES} ${MAKE_FILE}
 # Singular files are the same files as their plural form.
 #
 ${SINGULAR_FILES}: ${PLURAL_FILES}
-	${Q}for i in ${SINGULAR_FILES}; do \
-	    echo "rm -f $${i}"; \
-	    rm -f $${i}; \
-	    echo "cp $${i}s $${i}"; \
-	    cp $${i}s $${i}; \
+	${Q}for i in ${SINGULAR_FILES} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo "rm -f $${i}"; \
+		rm -f $${i}; \
+		echo "cp $${i}s $${i}"; \
+		cp $${i}s $${i}; \
+	    fi; \
 	done
 	-@if [ -z "${Q}" ]; then \
 	    echo ''; \
@@ -453,8 +562,10 @@ builtin: builtin.top builtin.end ../func.c funclist.sed
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q}for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo help/$$i; \
+	    fi; \
 	done | LANG=C ${SORT}
 
 distdir:
@@ -479,16 +590,39 @@ bsdi: all
 #
 detaillist:
 	${Q}-(echo "xxxxx"; \
-	   for i in ${DETAIL_HELP}; do \
+	   for i in ${DETAIL_HELP} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		if [ ! -f RCS/$$i,v ]; then \
 		    echo "WARNING: $$i not under RCS control" 1>&2; \
 		else \
 		    echo $$i; \
 		fi; \
+	    fi; \
 	done | LANG=C ${SORT}) | ${FMT} -70 | \
 	    ${SED} -e '1s/xxxxx/DETAIL_HELP=/' -e '2,$$s/^/	/' \
 		   -e 's/$$/ \\/' -e '$$s/ \\$$//'
 
+##
+#
+# rpm rules
+#
+##
+
+echo_inst_files:
+	${Q}for i in ${STD_HELP_FILES} full ${BLT_HELP_FILES} \
+		  builtin ${DETAIL_HELP} ${SINGULAR_FILES} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${HELPDIR}/$$i; \
+	    fi; \
+	done
+	${Q}echo __file__ ${HELPDIR}/obj
+
+##
+#
+# Utility rules
+#
+##
+
 clean:
 	rm -f obj mkbuiltin funclist.c funclist.o funclist
 	rm -f COPYING COPYING-LGPL
@@ -500,36 +634,51 @@ clobber:
 	rm -f ${SINGULAR_FILES} ${DETAIL_CLONE}
 
 install: all
-	-${Q}if [ ! -d ${TOPDIR} ]; then \
-		echo mkdir ${TOPDIR}; \
-		mkdir ${TOPDIR}; \
+	-${Q}if [ ! -d $T${CALC_SHAREDIR} ]; then \
+	    echo mkdir $T${CALC_SHAREDIR}; \
+	    mkdir $T${CALC_SHAREDIR}; \
+	    if [ ! -d "$T${CALC_SHAREDIR}" ]; then \
+		echo mkdir -p "$T${CALC_SHAREDIR}"; \
+		mkdir -p "$T${CALC_SHAREDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
+	    ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${LIBDIR} ]; then \
-		echo mkdir ${LIBDIR}; \
-		mkdir ${LIBDIR}; \
+	-${Q}if [ ! -d $T${HELPDIR} ]; then \
+	    echo mkdir $T${HELPDIR}; \
+	    mkdir $T${HELPDIR}; \
+	    if [ ! -d "$T${HELPDIR}" ]; then \
+		echo mkdir -p "$T${HELPDIR}"; \
+		mkdir -p "$T${HELPDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${HELPDIR}; \
+	    ${CHMOD} 0755 $T${HELPDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${HELPDIR} ]; then \
-		echo mkdir ${HELPDIR}; \
-		mkdir ${HELPDIR}; \
-	else \
-	    true; \
-	fi
-	${Q}for i in ${STD_HELP_FILES} ${BLT_HELP_FILES} builtin \
-		  full ${DETAIL_HELP} ${SINGULAR_FILES}; do \
-		echo rm -f ${HELPDIR}/$$i; \
-		rm -f ${HELPDIR}/$$i; \
-		echo cp $$i ${HELPDIR}; \
-		cp $$i ${HELPDIR}; \
-		echo ${CHMOD} 0444 ${HELPDIR}/$$i; \
-		${CHMOD} 0444 ${HELPDIR}/$$i; \
+	-${Q}for i in ${STD_HELP_FILES} ${BLT_HELP_FILES} builtin \
+		  full ${DETAIL_HELP} ${SINGULAR_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s $$i $T${HELPDIR}/$$i; then \
+		true; \
+	    else \
+		rm -f $T${HELPDIR}/$$i.new; \
+		cp -f $$i $T${HELPDIR}/$$i.new; \
+		${CHMOD} 0444 $T${HELPDIR}/$$i.new; \
+		mv -f $T${HELPDIR}/$$i.new $T${HELPDIR}/$$i; \
+		echo "installed $T${HELPDIR}/$$i"; \
+	    fi; \
 	done
-	rm -f ${HELPDIR}/obj
-	cp obj.file ${HELPDIR}/obj
-	${CHMOD} 0444 ${HELPDIR}/obj
-	${Q}echo remove files that are obsolete
-	-rm -f rmblk block stdlib
-	-rm -f ${HELPDIR}/rmblk ${HELPDIR}/block ${HELPDIR}/stdlib
+	-${Q}if ${CMP} -s obj.file $T${HELPDIR}/obj; then \
+	    true; \
+	else \
+	    rm -f $T${HELPDIR}/obj.new; \
+	    cp -f obj.file $T${HELPDIR}/obj.new; \
+	    ${CHMOD} 0444 $T${HELPDIR}/obj.new; \
+	    mv -f $T${HELPDIR}/obj.new $T${HELPDIR}/obj; \
+	    echo "installed $T${HELPDIR}/obj"; \
+	fi

help/config

@@ -510,7 +510,9 @@ Detailed config descriptions
 
 	5	Report on changes to the run state of calc.
 
-    Bits >= 6 are reserved for future use and should not be used at this time.
+	6	Report on rand() subtractive 100 shuffle generator issues.
+
+    Bits >= 7 are reserved for future use and should not be used at this time.
 
     By default, "calc_debug" is 0.  The initial value may be overridden
     by the -D command line option.
@@ -578,12 +580,14 @@ Detailed config descriptions
 
     The "verbose_quit" controls the print of the message:
 
-	Quit or abort executed
+	quit or abort executed
 
     when a non-interactive quit or abort without an argument is encountered.
     A quit of abort without an argument does not display a message when
     invoked at the interactive level.
 
+    By deafult, "verbose_quit" is false.
+
     =-=
 
     config("ctrl_d", "ctrl_d_string")
@@ -709,8 +713,8 @@ Detailed config descriptions
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.4 $
-## @(#) $Id: config,v 29.4 2001/04/08 09:08:27 chongo Exp $
+## @(#) $Revision: 29.6 $
+## @(#) $Id: config,v 29.6 2001/04/25 07:17:38 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/config,v $
 ##
 ## Under source code control:	1991/07/21 04:37:17

help/contrib

@@ -35,24 +35,41 @@ If your change is large, you should send entire files (either
 as a diff -c /dev/null your-file patch, or as a uuencoded and
 gziped (or compressed) tar file).
 
-You should send submissions to:
+To contribute code, scripts, resource files and/or to help please
+join the low volume calc mailing list by sending EMail to:
 
     calc-contrib at asthe dot com
 
     [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
     [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
 
+Your subject must contain the words:
+
+    calc mailing list subscription
+
+You may have additional words in your subject line.
+
+Feel free to follow the name line with additional EMail text as desired.
+
 Thanks for considering submitting code to calc.	 Calc is a collective
 work by a number of people.  It would not be what it is today without
 your efforts and submissions!
 
-Calc bug reports, however, should be sent to:
+=-=
+
+Calc bug reports and calc bug fixes should be sent to:
 
     calc-bugs at asthe dot com
 
     [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
     [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
 
+Your subject must contain the words:
+
+       calc bug report
+
+You may have additional words in your subject line.
+
 See the BUGS file or try the help command:
 
     help bugs
@@ -61,26 +78,10 @@ for details on bug reporting.
 
 =-=
 
-One may join the calc testing group by sending a request to:
-
-	calc-tester-request at asthe dot com
-
-    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-    [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
-
-    Your message body (not the subject) should consist of:
-
-	subscribe calc-tester address
-	end
-	name your_full_name
-
-    where "address" is your EMail address and "your_full_name"
-    is your full name.
-
 Landon Curt Noll
 http://www.isthe.com/chongo/
 
-chongo <was here> /\../\
+chongo (share and enjoy) /\../\
 
 ## Copyright (C) 1999  Landon Curt Noll
 ##
@@ -98,8 +99,8 @@ chongo <was here> /\../\
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: contrib,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.4 $
+## @(#) $Id: contrib,v 29.4 2001/06/01 11:37:14 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/contrib,v $
 ##
 ## Under source code control:	1997/03/09 16:33:22

help/im

@@ -20,7 +20,7 @@ LIMITS
     none
 
 LINK LIBRARY
-    COMPLEX *cimag(COMPLEX *x)
+    COMPLEX *c_imag(COMPLEX *x)
 
 SEE ALSO
     re
@@ -41,8 +41,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: im,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: im,v 29.3 2002/03/12 09:38:26 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/im,v $
 ##
 ## Under source code control:	1995/10/05 04:52:26

help/rand

@@ -1,5 +1,5 @@
 NAME
-    rand - additive 55 shuffle pseudo-random number generator
+    rand - subtractive 100 shuffle pseudo-random number generator
 
 SYNOPSIS
     rand([[min, ] max])
@@ -11,7 +11,7 @@ TYPES
     return	integer
 
 DESCRIPTION
-    Generate a pseudo-random number using an additive 55 shuffle generator.
+    Generate a pseudo-random number using an subtractive 100 shuffle generator.
     We return a pseudo-random number over the half closed interval [min,max).
     By default, min is 0 and max is 2^64.
 
@@ -38,36 +38,40 @@ DESCRIPTION
 
     when seeded with the same seed.
 
-    The rand generator has two distinct parts, the additive 55 method
-    and the shuffle method.  The additive 55 method is described in:
+    The rand generator has two distinct parts, the subtractive 100 method
+    and the shuffle method.  The subtractive 100 method is described in:
 
-	"The Art of Computer Programming - Seminumerical Algorithms"
-	by Knuth, Vol 2, 2nd edition (1981), Section 3.2.2, page 27,
-	Algorithm A.
+	"The Art of Computer Programming - Seminumerical Algorithms",
+	Vol 2, 3rd edition (1998), Section 3.6, page 186, formula (2).
 
-    The period and other properties of the additive 55 method
+    The "use only the first 100 our of every 1009" is described in
+    Knuth's "The Art of Computer Programming - Seminumerical Algorithms",
+    Vol 2, 3rd edition (1998), Section 3.6, page 188".
+
+    The period and other properties of the subtractive 100 method
     make it very useful to 'seed' other generators.
 
-    The shuffle method is feed values by the additive 55 method.
+    The shuffle method is feed values by the subtractive 100 method.
     The shuffle method is described in:
 
-	"The Art of Computer Programming - Seminumerical Algorithms"
-	by Knuth, Vol 2, 2nd edition (1981), Section 3.2.2, page 32,
-	Algorithm B.
+	"The Art of Computer Programming - Seminumerical Algorithms",
+	Vol 2, 3rd edition (1998), Section 3.2.2, page 34, Algorithm B.
 
     The rand generator has a good period, and is fast.	It is reasonable as
     generators go, though there are better ones available.  The shuffle
     method has a very good period, and is fast.	 It is fairly good as
     generators go, particularly when it is feed reasonably random
-    numbers.  Because of this, we use feed values from the additive 55
+    numbers.  Because of this, we use feed values from the subtractive 100
     method into the shuffle method.
 
     The rand generator uses two internal tables:
 
-	additive table - 55 entries of 64 bits used by the additive 55 method
+	additive table - 100 entries of 64 bits used by the subtractive
+			 100 method
 
 	shuffle table - 256 entries of 64 bits used by the shuffle method
-			feed by the additive 55 method from the additive table
+			feed by the subtractive 100 method from the
+			subtractive table
 
     The goals of this generator are:
 
@@ -95,21 +99,21 @@ DESCRIPTION
     a standard against which other generators may be measured.
 
     The Rand book of numbers was groups into groups of 20 digits.  The
-    first 55 groups < 2^64 were used to initialize the default additive
+    first 100 groups < 2^64 were used to initialize the default additive
     table.  The size of 20 digits was used because 2^64 is 20 digits
     long.  The restriction of < 2^64 was used to prevent modulus biasing.
 
     The shuffle table size is longer than the 100 entries recommended
     by Knuth.  We use a power of 2 shuffle table length so that the
-    shuffle process can select a table entry from a new additive 55
+    shuffle process can select a table entry from a new subtractive 100
     value by extracting its low order bits.  The value 256 is convenient
     in that it is the size of a byte which allows for easy extraction.
 
-    We use the upper byte of the additive 55 value to select the
+    We use the upper byte of the subtractive 100 value to select the
     shuffle table entry because it allows all of 64 bits to play a part
     in the entry selection.  If we were to select a lower 8 bits in the
     64 bit value, carries that propagate above our 8 bits would not
-    impact the additive 55 generator output.
+    impact the subtractive 100 generator output.
 
     It is 'nice' when a seed of "n" produces a 'significantly different'
     sequence than a seed of "n+1".  Generators, by convention, assign
@@ -161,7 +165,7 @@ DESCRIPTION
     The values 'a' and 'c for randreseed64 are taken from the Rand book
     of numbers.	 Because m=2^64 is 20 decimal digits long, we will
     search the Rand book of numbers 20 at a time.  We will skip any of
-    the 55 values that were used to initialize the additive 55
+    the 100 values that were used to initialize the subtractive 100
     generators.	 The values obtained from the Rand book are:
 
 	a = 6316878969928993981
@@ -190,36 +194,40 @@ DESCRIPTION
 
     The truly paranoid might suggest that my claims in the MAGIC NUMBERS
     section are a lie intended to entrap people.  Well they are not, but
-    you need not take my (Landon Curt Noll) word for it.
+    if you that paranoid why would you use a non-cryprographically strong
+    pseudo-random number generator in the first place?  You would be
+    better off using the random() builtin function.
 
-    The random numbers from the Rand book of random numbers can be
+    The two constants that were picked from the Rand Book of Random Numbers
+    The random numbers from the Rand Book of Random Numbers can be
     verified by anyone who obtains the book.  As these numbers were
-    created before I (Landon Curt Noll) was born (you can look up my
-    birth record if you want), I claim to have no possible influence on
-    their generation.
+    created before I (Landon Curt Noll) was born (you can look up
+    my birth record if you want), I claim to have no possible influence
+    on their generation.
 
     There is a very slight chance that the electronic copy of the
-    Rand book that I was given access to differs from the printed text.
-    I am willing to provide access to this electronic copy should
-    anyone wants to compare it to the printed text.
+    Rand Book of Random Numbers that I was given access to differs
+    from the printed text.  I am willing to provide access to this
+    electronic copy should anyone wants to compare it to the printed text.
 
-    When using the a55 generator, one may select your own 55 additive
+    When using the s100 generator, one may select your own 100 subtractive
     values by calling:
 
-	srand(mat55)
+         srand(mat100)
 
-    and avoid using my magic numbers.  Of course, you must pick good
-    additive 55 values yourself!
+    and avoid using my magic numbers.  The randreseed64 process is NOT
+    applied to the matrix values. Of course, you must pick good subtractive
+    100 values yourself!
 
 EXAMPLE
     > print srand(0), rand(), rand(), rand()
-    RAND state 14384206130809570460 10173010522823332484 5713611208311484212
+    RAND state 2298441576805697181 3498508396312845423 5031615567549397476
 
     > print rand(123), rand(123), rand(123), rand(123), rand(123), rand(123)
-    17 104 74 47 48 46
+    106 59 99 99 25 88
 
     > print rand(2,12), rand(2^50,3^50), rand(0,2), rand(-400000, 120000)
-    11 170570393286648531699560 1 -96605
+    2 658186291252503497642116 1 -324097
 
 LIMITS
     min < max
@@ -248,8 +256,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: rand,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: rand,v 29.3 2001/04/14 22:46:33 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/rand,v $
 ##
 ## Under source code control:	1996/01/01 02:16:09

help/re

@@ -20,7 +20,7 @@ LIMITS
     none
 
 LINK LIBRARY
-    COMPLEX *cimag(COMPLEX *x)
+    COMPLEX *c_imag(COMPLEX *x)
 
 SEE ALSO
     im
@@ -41,8 +41,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: re,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: re,v 29.3 2002/03/12 09:38:26 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/re,v $
 ##
 ## Under source code control:	1995/10/05 04:52:27

help/seed

@@ -19,9 +19,9 @@ DESCRIPTION
 	is almost certainly non-chaotic.  This function is likely not
 	suitable for applications (such as cryptographic applications)
 	where the unpredictability of seeds is critical.  For such critical
-	applications, lavarand should be used.	See the URL:
+	applications, LavaRnd should be used.	See the URL:
 
-		http://lavarand.sgi.com/index.html
+		http://www.LavaRnd.org/
 
 	for information about seeding a pseudo-random number generator
 	(such as rand() or random()) with the cryptographic hash of the
@@ -67,8 +67,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: seed,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: seed,v 29.3 2001/05/13 13:26:26 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/seed,v $
 ##
 ## Under source code control:	1999/10/03 10:04:29

help/srand

@@ -1,5 +1,5 @@
 NAME
-    srand - seed the additive 55 shuffle pseudo-random number generator
+    srand - seed the subtractive 100 shuffle pseudo-random number generator
 
 SYNOPSIS
     srand([seed])
@@ -10,43 +10,43 @@ TYPES
     return	rand state
 
 DESCRIPTION
-    Seed the pseudo-random number using an additive 55 shuffle generator.
+    Seed the pseudo-random number using an subtractive 100 shuffle generator.
 
     For integer seed != 0:
 
-	Any buffered rand generator bits are flushed.  The additive table
-	for the rand generator is loaded with the default additive table.
+	Any buffered rand generator bits are flushed.  The subtractive table
+	for the rand generator is loaded with the default subtractive table.
 	The low order 64 bits of seed is xor-ed against each table value.
-	The additive table is shuffled according to seed/2^64.
+	The subtractive table is shuffled according to seed/2^64.
 
 	The following calc code produces the same effect on the internal
-	additive table:
+	subtractive table:
 
-	    /* reload default additive table xor-ed with low 64 seed bits */
+	    /* reload default subtractive table xor-ed with low 64 seed bits */
 	    seed_xor = seed & ((1<<64)-1);
-	    for (i=0; i < 55; ++i) {
-		additive[i] = xor(default_additive[i], seed_xor);
+	    for (i=0; i < 100; ++i) {
+		subtractive[i] = xor(default_subtractive[i], seed_xor);
 	    }
 
-	    /* shuffle the additive table */
+	    /* shuffle the subtractive table */
 	    seed >>= 64;
-	    for (i=55; seed > 0 && i > 0; --i) {
+	    for (i=100; seed > 0 && i > 0; --i) {
 		quomod(seed, i+1, seed, j);
-		swap(additive[i], additive[j]);
+		swap(subtractive[i], subtractive[j]);
 	    }
 
 	Seed must be >= 0.  All seed values < 0 are reserved for future use.
 
-	The additive table pointers are reset to additive[23] and additive[54].
-	Last the shuffle table is loaded with successive values from the
-	additive 55 generator.
+	The subtractive table pointers are reset to subtractive[36]
+	and subtractive[99].  Last the shuffle table is loaded with
+	successive values from the subtractive 100 generator.
 
 	There is no limit on the size of a seed.  On the other hand,
 	extremely large seeds require large tables and long seed times.
-	Using a seed in the range of [2^64, 2^64 * 55!) should be
+	Using a seed in the range of [2^64, 2^64 * 100!) should be
 	sufficient for most purposes.  An easy way to stay within this
-	range to to use seeds that are between 21 and 93 digits, or
-	64 to 308 bits long.
+	range to to use seeds that are between 21 and 178 digits, or
+	64 to 588 bits long.
 
 	To help make the generator produced by seed S, significantly
 	different from S+1, seeds are scrambled prior to use.  The
@@ -68,9 +68,9 @@ DESCRIPTION
 	After this call, the rand generator is restored to its initial
 	state after calc started.
 
-	The additive 55 pointers are reset to additive[23] and additive[54].
-	Last the shuffle table is loaded with successive values from the
-	additive 55 generator.
+	The subtractive 100 pointers are reset to subtractive[36]
+	and subtractive[99].  Last the shuffle table is loaded with
+	successive values from the subtractive 100 generator.
 
 	The call:
 
@@ -80,14 +80,14 @@ DESCRIPTION
 
     For matrix arg:
 
-	Any buffered random bits are flushed.  The additive table with the
-	first 55 entries of the matrix mod 2^64.
+	Any buffered random bits are flushed.  The subtractive table with the
+	first 100 entries of the matrix mod 2^64.
 
-	The additive 55 pointers are reset to additive[23] and additive[54].
-	Last the shuffle table is loaded with successive values from the
-	additive 55 generator.
+	The subtractive 100 pointers are reset to subtractive[36]
+	and subtractive[99].  Last the shuffle table is loaded with
+	successive values from the subtractive 100 generator.
 
-	This form allows one to load the internal additive 55 generator
+	This form allows one to load the internal subtractive 100 generator
 	with user supplied values.
 
 	The randreseed64 process is NOT applied to the matrix values.
@@ -114,7 +114,7 @@ DESCRIPTION
 
     For no arg given:
 
-	Return current a55 generator state.  This call does not alter
+	Return current s100 generator state.  This call does not alter
 	the generator state.
 
 	This call allows one to take a snapshot of the current generator state.
@@ -126,25 +126,25 @@ EXAMPLE
 	    RAND state
     > state = srand();
     > print rand(123), rand(123), rand(123), rand(123), rand(123), rand(123);
-    32 60 67 71 1 77
+    80 95 41 78 100 27
     > print rand(123), rand(123), rand(123), rand(123), rand(123), rand(123);
-    52 72 110 15 69 58
+    122 109 12 95 80 32
     > state2 = srand(state);
     > print rand(123), rand(123), rand(123), rand(123), rand(123), rand(123);
-    32 60 67 71 1 77
+    80 95 41 78 100 27
     > print rand(123), rand(123), rand(123), rand(123), rand(123), rand(123);
-    52 72 110 15 69 58
+    122 109 12 95 80 32
     > state3 = srand();
     > print state3 == state2;
     1
     > print rand();
-    641407694185874626
+    10710588361472584495
 
 LIMITS
-    for matrix arg, the matrix must have at least 55 integers
+    for matrix arg, the matrix must have at least 100 integers
 
 LINK LIBRARY
-    RAND *zsrand(ZVALUE *pseed, MATRIX *pmat55)
+    RAND *zsrand(ZVALUE *pseed, MATRIX *pmat100)
     RAND *zsetrand(RAND *state)
 
 SEE ALSO
@@ -166,8 +166,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: srand,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: srand,v 29.3 2001/04/14 22:46:33 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/srand,v $
 ##
 ## Under source code control:	1996/01/01 04:19:07

help/srandom

@@ -220,11 +220,11 @@ DESCRIPTION
 	Blum moduli.
 
 	The pre-defined Blum moduli and quadratic residues were selected
-	by lavarand, a hardware random number generator.  See the URL:
+	by LavaRnd, a hardware random number generator.  See the URL:
 
-	    http://lavarand.sgi.com/index.html
+	    http://www.LavaRnd.org/
 
-	for an explanation of how the lavarand random number generator works.
+	for an explanation of how the LavaRnd random number generator works.
 	For more information, see the comments at the top of the calc
 	source file, zrandom.c.
 
@@ -354,8 +354,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: srandom,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: srandom,v 29.3 2001/05/13 13:26:26 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/srandom,v $
 ##
 ## Under source code control:	1997/02/17 01:18:22

help/usage

@@ -249,8 +249,8 @@ Calc command line
 			./myfile.cal
 			${LIBDIR}/myfile
 			${LIBDIR}/myfile.cal
-			${CUSTOMLIBDIR}/myfile
-			${CUSTOMLIBDIR}/myfile.cal
+			${CUSTOMCALDIR}/myfile
+			${CUSTOMCALDIR}/myfile.cal
 
 	  If the file is found, the search stops and the commands in
 	  the file are executed.  It is an error if no readable file
@@ -354,7 +354,7 @@ For more information use the following calc commands:
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
 ## @(#) $Revision: 29.3 $
-## @(#) $Id: usage,v 29.3 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Id: usage,v 29.3 2000/06/07 14:02:33 chongo Exp chongo $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/usage,v $
 ##
 ## Under source code control:	1991/07/21 04:37:25

help/version

@@ -0,0 +1,59 @@
+NAME
+    version - return the calc version string
+
+SYNOPSIS
+    version()
+
+TYPES
+    return	string
+
+DESCRIPTION
+    Returns the calc version string.
+
+    Calc version strings can be of the form:
+
+    	x.y.z.w
+    	x.y.z
+    	x.y
+
+    where x, y, z, w, v are integers (without leading 0's) and,
+    t is the the liternal character 't'.
+
+EXAMPLE
+    > version()
+    	    "2.11.5.4"
+
+LIMITS
+    none
+
+LINK LIBRARY
+    none
+
+SEE ALSO
+    n/a
+
+## Copyright (C) 2001  Landon Curt Noll
+##
+## Calc is open software; you can redistribute it and/or modify it under
+## the terms of the version 2.1 of the GNU Lesser General Public License
+## as published by the Free Software Foundation.
+##
+## Calc is distributed in the hope that it will be useful, but WITHOUT
+## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+## or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+## Public License for more details.
+##
+## A copy of version 2.1 of the GNU Lesser General Public License is
+## distributed with calc under the filename COPYING-LGPL.  You should have
+## received a copy with calc; if not, write to Free Software Foundation, Inc.
+## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+##
+## @(#) $Revision: 29.3 $
+## @(#) $Id: version,v 29.3 2001/06/09 23:32:45 chongo Exp $
+## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/version,v $
+##
+## Under source code control:	2001/05/28 17:38:01
+## File existed as early as:	2001
+##
+## chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+## Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/

hist.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: hist.h,v 29.3 2001/03/17 21:31:47 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: hist.h,v 29.4 2002/03/12 09:40:57 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/hist.h,v $
  *
  * Under source code control:	1993/05/02 20:09:20
@@ -50,7 +50,11 @@
 #define HOMECHAR	'~'	/* char which indicates home directory */
 #define DOTCHAR		'.'	/* char which indicates current directory */
 #define PATHCHAR	'/'	/* char which separates path components */
+#if defined(__MSDOS__) || defined(__WIN32)
+#define LISTCHAR	';'	/* char which separates paths in a list */
+#else
 #define LISTCHAR	':'	/* char which separates paths in a list */
+#endif
 
 
 /*

input.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.5 $
- * @(#) $Id: input.c,v 29.5 2001/03/17 21:31:47 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: input.c,v 29.6 2002/03/12 09:40:57 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/input.c,v $
  *
  * Under source code control:	1990/02/15 01:48:16
@@ -46,6 +46,12 @@
 #include <unistd.h>
 #endif
 
+#if defined(__MSDOS__)
+#include <limits.h>
+#define _fullpath(f,n,s) (_fixpath(n,f),f)
+#define _MAX_PATH PATH_MAX
+#endif
+
 #include "calc.h"
 #include "conf.h"
 #include "hist.h"
@@ -816,11 +822,12 @@ runrcfiles(void)
  * given:
  *	sbuf		stat of the inode in question
  */
+
 static int
 isinoderead(struct stat *sbuf)
 {
 	int i;
-#if defined(_WIN32)
+#if defined(_WIN32) || defined(__MSDOS__)
 	char fullpathname[_MAX_PATH];
 #endif
 
@@ -832,11 +839,11 @@ isinoderead(struct stat *sbuf)
 
 	/* scan the entire readset */
 	for (i=0; i < maxreadset; ++i) {
-#if defined(_WIN32)
+#if defined(_WIN32) || defined(__MSDOS__)
 		if (readset[i].active &&
-		    strcmp(readset[i].path,
-		    	   _fullpath(fullpathname,cip->i_name,
-			   _MAX_PATH)) == 0) {
+		    strcasecmp(readset[i].path,
+		    	       _fullpath(fullpathname,cip->i_name,
+			       _MAX_PATH)) == 0) {
 			/* found a match */
 			return i;
 		}
@@ -954,14 +961,18 @@ addreadset(char *name, char *path, struct stat *sbuf)
 		return -1;
 	}
 	strcpy(readset[ret].name, name);
-#if defined(_WIN32)
+#if defined(_WIN32) || defined(__MSDOS__)
 	/*
 	 * For WIN32, _fullpath expands the path to a fully qualified
 	 * path name, which under WIN32 FAT and NTFS is unique, just
 	 * like UNIX inodes. _fullpath also allocated the memory for
 	 * this new longer path name.
 	 */
-	readset[ret].path = _fullpath(NULL, path, 0);
+ 	 {
+	 	char fullpathname[_MAX_PATH];
+
+		readset[ret].path = _fullpath(fullpathname, path, _MAX_PATH);
+	 }
 #else /* Windoz free systems */
 	readset[ret].path = (char *)malloc(strlen(path)+1);
 	if (readset[ret].path == NULL) {

jump.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: jump.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: jump.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/jump.h,v $
  *
  * Under source code control:	1994/06/29 04:03:55
@@ -65,7 +65,13 @@
 #if !defined(__JUMP_H__)
 #define __JUMP_H__
 
-#include "have_const.h"
+
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "have_const.h"
+#else
+# include <calc/have_const.h>
+#endif
+
 
 /*
  * trivial prime CONSTants

label.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: label.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: label.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/label.h,v $
  *
  * Under source code control:	1990/02/15 01:48:33
@@ -32,7 +32,11 @@
 #define __LABEL_H__
 
 
-#include "zmath.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "zmath.h"
+#else
+# include <calc/zmath.h>
+#endif
 
 
 #define NULL_LABEL	((LABEL *) 0)

lib_calc.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.7 $
- * @(#) $Id: lib_calc.c,v 29.7 2001/04/08 22:05:40 chongo Exp $
+ * @(#) $Revision: 29.8 $
+ * @(#) $Id: lib_calc.c,v 29.8 2002/03/12 09:40:57 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/lib_calc.c,v $
  *
  * Under source code control:	1996/06/17 18:06:19
@@ -217,6 +217,11 @@ libcalc_call_me_first(void)
 	 */
 	if (program != NULL) {
 		p = strrchr(program, '/');
+#if defined(_WIN32) || defined(__MSDOS__)
+		if (p == NULL) {
+			p = strrchr(program, '\\');
+		}
+#endif
 		if (p == NULL) {
 			base_name = program;
 		} else {

math_error.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: math_error.h,v 29.3 2001/03/17 21:31:47 chongo Exp $
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: math_error.h,v 29.5 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/math_error.h,v $
  *
  * Under source code control:	1997/03/23 18:37:10
@@ -33,7 +33,11 @@
 #define __MATH_ERROR_H__
 
 
-#include "win32dll.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "win32dll.h"
+#else
+# include <calc/win32dll.h>
+#endif
 
 
 /*

opcodes.c

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: opcodes.c,v 29.3 2000/07/17 15:35:49 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: opcodes.c,v 29.4 2001/04/25 07:16:26 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/opcodes.c,v $
  *
  * Under source code control:	1990/02/15 01:48:19
@@ -3234,7 +3234,7 @@ o_quit(FUNC *fp, long index)
 	if (cp)
 		printf("%s\n", cp);
 	else if (conf->verbose_quit)
-		printf("Quit or abort executed\n");
+		printf("quit or abort executed\n");
 	if (!inputisterminal() && !strcmp(fp->f_name, "*"))
 		closeinput();
 	go = FALSE;

opcodes.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.4 $
- * @(#) $Id: opcodes.h,v 29.4 2001/03/17 21:31:47 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: opcodes.h,v 29.6 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/opcodes.h,v $
  *
  * Under source code control:	1990/02/15 01:48:35
@@ -32,7 +32,11 @@
 #define __OPCODES_H__
 
 
-#include "win32dll.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "win32dll.h"
+#else
+# include <calc/win32dll.h>
+#endif
 
 
 /*

prime.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: prime.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: prime.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/prime.h,v $
  *
  * Under source code control:	1994/06/04 03:26:15
@@ -33,8 +33,13 @@
 #define __PRIME_H__
 
 
-#include "qmath.h"
-#include "have_const.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "qmath.h"
+# include "have_const.h"
+#else
+# include <calc/math.h>
+# include <calc/have_const.h>
+#endif
 
 
 #define MAX_MAP_PRIME ((FULL)65521)	   /* (2^16-15) larest prime in prmap */

qmath.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: qmath.h,v 29.3 2000/07/17 15:35:49 chongo Exp $
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: qmath.h,v 29.5 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/qmath.h,v $
  *
  * Under source code control:	1993/07/30 19:42:47
@@ -32,7 +32,12 @@
 #define __QMATH_H__
 
 
-#include "zmath.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "zmath.h"
+#else
+# include <calc/zmath.h>
+#endif
+
 
 #define INITCONSTCOUNT 9    /* number of initnumbs[] pre-defined constants */
 

quickhash.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: quickhash.c,v 29.3 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: quickhash.c,v 29.4 2001/04/14 22:47:21 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/quickhash.c,v $
  *
  * Under source code control:	1995/03/04 11:34:23
@@ -304,7 +304,7 @@ objhash(OBJECT *op, QCKHASH val)
 
 
 /*
- * randhash - return a trivial hash for an a55 state
+ * randhash - return a trivial hash for an s100 state
  *
  * given:
  *	state - state to hash
@@ -326,6 +326,7 @@ randhash(RAND *r, QCKHASH val)
 		val = fnv(r->j, V_RAND+val);
 		val = fnv(r->k, val);
 		val = fnv(r->bits, val);
+		val = fnv(r->need_to_skip, val);
 
 		/* hash the state arrays */
 		return fnv_fullhash(&r->buffer[0], SLEN+SCNT+SHUFLEN, val);

sample/Makefile

@@ -17,8 +17,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.5 $
-# @(#) $Id: Makefile,v 29.5 2001/04/08 10:53:52 chongo Exp $
+# @(#) $Revision: 29.16 $
+# @(#) $Id: Makefile,v 29.16 2002/03/14 00:28:28 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/sample/RCS/Makefile,v $
 #
 # Under source code control:	1997/04/19 22:46:49
@@ -75,22 +75,120 @@ SAMPLE_OBJ= many_random.o test_random.o
 #Q=
 Q=@
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
+####
+
+# Where the system include (.h) files are kept
 #
-# where to install things
+# For DJGPP, select:
 #
-# ${TOPDIR} is the directory under which the calc directory will be placed.
-# ${LIBDIR} is where the *.cal, *.h, *.a, bindings and help dir are installed.
-# ${HELPDIR} is where the help directory is installed.
+#	INCDIR= /dev/env/DJDIR/include
 #
-TOPDIR= /usr/local/lib
-#TOPDIR= /usr/lib
-#TOPDIR= /usr/libdata
-#TOPDIR= /usr/contrib/lib
+# If in doubt, set:
 #
-LIBDIR= ${TOPDIR}/calc
-HELPDIR= ${LIBDIR}/help
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
+SCRIPTDIR= ${BINDIR}/cscript
+
+# T - top level directory under which calc will be installed
+#
+# The calc install is performed under $T, the calc build is
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
+#
+# If $T is empty, calc is installed under /, which is the same
+# top of tree for which it was built.  If $T is non-empty, then
+# calc is installed under $T, as if one had to chroot under
+# $T for calc to operate.
+#
+# If in doubt, use T=
+#
+T=
 
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
@@ -266,12 +364,15 @@ CALCLIBLIST= ${C_SRC} ${H_SRC} ${MAKE_FILE} README_SAMPLE
 
 # complete list of targets
 #
-TARGETS= many_random test_random
+# NOTE: This list MUST be co-ordinated with the ${SAMPLE_TARGETS} variable
+#	in the upper level ../Makefile
+#
+SAMPLE_TARGETS= many_random test_random
+TARGETS= ${SAMPLE_TARGETS}
 
 # required vars
 #
 SHELL= /bin/sh
-MAKE_FILE= Makefile
 
 # standard tools
 #
@@ -279,6 +380,7 @@ SED= sed
 MAKEDEPEND= makedepend
 CHMOD= chmod
 SORT= sort
+CMP= cmp
 
 ##
 #
@@ -287,6 +389,7 @@ SORT= sort
 ##
 
 all: ${TARGETS} .all
+	@true
 
 test_random.o: test_random.c
 	${CC} ${CFLAGS} ${ALLOW_CUSTOM} test_random.c -c
@@ -326,8 +429,10 @@ many_random: many_random.o ../libcalc.a
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q}for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo sample/$$i; \
+	    fi; \
 	done
 
 distdir:
@@ -363,11 +468,14 @@ depend:
 	-${Q}rm -rf skel
 	${Q}mkdir skel
 	${Q}mkdir skel/sample
-	-${Q}for i in ${C_SRC}; do \
+	-${Q}for i in ${C_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		${SED} -n '/^#[	 ]*include[	 ]*"/p' \
 		    "$$i" > "skel/sample/$$i"; \
+	    fi; \
 	done
 	-${Q}for i in ${H_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		if [ X"$$i" != X"/dev/null" ]; then \
 		    tag="`echo $$i | ${SED} 's/[\.+,:]/_/g'`"; \
 		    echo "#if !defined($$tag)" > "skel/sample/$$i"; \
@@ -376,27 +484,32 @@ depend:
 			>> "skel/sample/$$i"; \
 		    echo '#endif /* '"$$tag"' */' >> "skel/sample/$$i"; \
 		fi; \
+	    fi; \
 	done
 	${Q}(cd ..; ${MAKE} hsrc)
 	${Q}for i in `cd ..; ${MAKE} h_list 2>&1 | \
 			     ${SED} -e '/Entering directory/d' \
 				    -e '/Nothing to be done/d' \
-				    -e '/Leaving directory/d'`; do \
+				    -e '/Leaving directory/d'` /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		tag="`echo $$i | ${SED} 's/[\.+,:]/_/g'`"; \
 		echo "#if !defined($$tag)" > "skel/$$i"; \
 		echo "#define $$tag" >> "skel/$$i"; \
 		${SED} -n '/^#[	 ]*include[	 ]*"/p' "../$$i" \
 		    >> "skel/$$i"; \
 		echo '#endif /* '"$$tag"' */' >> "skel/$$i"; \
+	    fi; \
 	done
 	-${Q}rm -f skel/sample/makedep.out
 	${Q}echo sample/skel formed
 	${Q}echo forming sample dependency list
 	${Q}echo "# DO NOT DELETE THIS LINE -- make depend depends on it." > \
 	    skel/sample/makedep.out
-	${Q}cd skel/sample; ${MAKEDEPEND} -w 1 -m -f makedep.out -I.. ${C_SRC}
-	-${Q}for i in ${C_SRC}; do \
+	${Q}cd skel/sample; ${MAKEDEPEND} -w 1 -f makedep.out -I.. ${C_SRC}
+	-${Q}for i in ${C_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo "$$i" | ${SED} 's/^\(.*\)\.c/\1.o: \1.c/'; \
+	    fi; \
 	done >> skel/sample/makedep.out
 	${Q}echo sample dependency list formed
 	${Q}echo forming new sample/Makefile
@@ -407,7 +520,7 @@ depend:
 	${Q}${SED} -n '3,$$p' skel/sample/makedep.out | \
 		LANG=C ${SORT} -u >> Makefile
 	-${Q}rm -rf skel
-	-${Q}if cmp -s Makefile.bak Makefile; then \
+	-${Q}if ${CMP} -s Makefile.bak Makefile; then \
 		echo 'sample Makefile was already up to date'; \
 		mv -f Makefile.bak Makefile; \
 	else \
@@ -422,6 +535,15 @@ depend:
 		fi; \
 	fi
 
+##
+#
+# rpm rules
+#
+##
+
+echo_inst_files: Makefile
+
+
 ##
 #
 # Utility rules
@@ -437,7 +559,9 @@ clobber:
 	rm -f .all Makefile.tmp sample
 
 # for right now we will not install anything
+#
 install: all
+	@true
 
 ##
 #
@@ -451,8 +575,8 @@ install: all
 many_random.o: ../alloc.h
 many_random.o: ../block.h
 many_random.o: ../byteswap.h
-many_random.o: ../calcerr.h
 many_random.o: ../calc.h
+many_random.o: ../calcerr.h
 many_random.o: ../cmath.h
 many_random.o: ../config.h
 many_random.o: ../endian_calc.h
@@ -465,22 +589,22 @@ many_random.o: ../have_stdlib.h
 many_random.o: ../have_string.h
 many_random.o: ../lib_util.h
 many_random.o: ../longbits.h
-many_random.o: many_random.c
 many_random.o: ../md5.h
 many_random.o: ../nametype.h
 many_random.o: ../qmath.h
-many_random.o: ../shs1.h
 many_random.o: ../shs.h
+many_random.o: ../shs1.h
 many_random.o: ../string.h
 many_random.o: ../value.h
 many_random.o: ../win32dll.h
 many_random.o: ../zmath.h
 many_random.o: ../zrandom.h
+many_random.o: many_random.c
 test_random.o: ../alloc.h
 test_random.o: ../block.h
 test_random.o: ../byteswap.h
-test_random.o: ../calcerr.h
 test_random.o: ../calc.h
+test_random.o: ../calcerr.h
 test_random.o: ../cmath.h
 test_random.o: ../config.h
 test_random.o: ../endian_calc.h
@@ -496,11 +620,11 @@ test_random.o: ../longbits.h
 test_random.o: ../md5.h
 test_random.o: ../nametype.h
 test_random.o: ../qmath.h
-test_random.o: ../shs1.h
 test_random.o: ../shs.h
+test_random.o: ../shs1.h
 test_random.o: ../string.h
-test_random.o: test_random.c
 test_random.o: ../value.h
 test_random.o: ../win32dll.h
 test_random.o: ../zmath.h
 test_random.o: ../zrandom.h
+test_random.o: test_random.c

seed.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.4 $
- * @(#) $Id: seed.c,v 29.4 2001/03/17 21:31:47 chongo Exp $
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: seed.c,v 29.5 2001/05/08 06:44:29 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/seed.c,v $
  *
  * Under source code control:	1999/10/03 10:06:53
@@ -31,10 +31,10 @@
 /*
  * Generate a quasi-random seed based on system and process information.
  *
- * NOTE: This is not a good source of chaotic data.  The lavarand
+ * NOTE: This is not a good source of chaotic data.  The LavaRnd
  *	 system does a much better job of that.	 See:
  *
- *		http://lavarand.sgi.com/index.html
+ *		http://www.LavaRnd.org/
  */
 
 
@@ -270,10 +270,10 @@ hash_buf(char *buf, unsigned len)
  *
  * Generate a quasi-random seed based on system and process information.
  *
- * NOTE: This is not a good source of chaotic data.  The lavarand
+ * NOTE: This is not a good source of chaotic data.  The LavaRnd
  *	 system does a much better job of that.	 See:
  *
- *		http://lavarand.sgi.com/index.html
+ *		http://www.LavaRnd.org/
  *
  * PORTING NOTE:
  *    If when porting this code to your system and something

string.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: string.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: string.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/string.h,v $
  *
  * Under source code control:	1990/02/15 01:48:36
@@ -32,7 +32,11 @@
 #define __CALCSTRING_H__
 
 
-#include "zmath.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "zmath.h"
+#else
+# include <calc/zmath.h>
+#endif
 
 
 struct string {

symbol.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: symbol.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: symbol.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/symbol.h,v $
  *
  * Under source code control:	1990/02/15 01:48:37
@@ -32,7 +32,11 @@
 #define __SYMBOL_H__
 
 
-#include "zmath.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "zmath.h"
+#else
+# include <calc/zmath.h>
+#endif
 
 
 /*

token.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: token.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: token.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/token.h,v $
  *
  * Under source code control:	1990/02/15 01:48:37
@@ -32,7 +32,11 @@
 #define __TOKEN_H__
 
 
-#include "zmath.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "zmath.h"
+#else
+# include <calc/zmath.h>
+#endif
 
 
 /*

value.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.5 $
- * @(#) $Id: value.h,v 29.5 2001/03/17 21:31:47 chongo Exp $
+ * @(#) $Revision: 29.7 $
+ * @(#) $Id: value.h,v 29.7 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/value.h,v $
  *
  * Under source code control:	1993/07/30 19:42:47
@@ -32,15 +32,28 @@
 #define __VALUE_H__
 
 
-#include "win32dll.h"
-#include "cmath.h"
-#include "config.h"
-#include "shs.h"
-#include "calcerr.h"
-#include "hash.h"
-#include "block.h"
-#include "nametype.h"
-#include "string.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "win32dll.h"
+# include "cmath.h"
+# include "config.h"
+# include "shs.h"
+# include "calcerr.h"
+# include "hash.h"
+# include "block.h"
+# include "nametype.h"
+# include "string.h"
+#else
+# include <calc/win32dll.h>
+# include <calc/cmath.h>
+# include <calc/config.h>
+# include <calc/shs.h>
+# include <calc/calcerr.h>
+# include <calc/hash.h>
+# include <calc/block.h>
+# include <calc/nametype.h>
+# include <calc/string.h>
+#endif
+
 
 #define MAXDIM		4	/* maximum number of dimensions in matrices */
 #define USUAL_ELEMENTS	4	/* usual number of elements for objects */

version.c

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.23 $
- * @(#) $Id: version.c,v 29.23 2001/04/10 22:13:40 chongo Exp $
+ * @(#) $Revision: 29.39 $
+ * @(#) $Id: version.c,v 29.39 2002/03/14 00:28:28 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/version.c,v $
  *
  * Under source code control:	1990/05/22 11:00:58
@@ -32,6 +32,9 @@
 
 
 #include <stdio.h>
+#include <errno.h>
+#include <string.h>
+
 #if defined(CALC_VER)
 #include <stdlib.h>
 #include <unistd.h>
@@ -43,7 +46,8 @@ static char *program;
 #define MAJOR_VER	2	/* major version */
 #define MINOR_VER	11	/* minor version */
 #define MAJOR_PATCH	5	/* patch level or 0 if no patch */
-#define MINOR_PATCH	"2.1"	/* test number or empty string if no patch */
+#define MINOR_PATCH	8	/* test number or 0 if no minor patch */
+
 
 /*
  * calc version constants
@@ -51,7 +55,7 @@ static char *program;
 int calc_major_ver = MAJOR_VER;
 int calc_minor_ver = MINOR_VER;
 int calc_major_patch = MAJOR_PATCH;
-char *calc_minor_patch = MINOR_PATCH;
+int calc_minor_patch = MINOR_PATCH;
 
 
 /*
@@ -89,13 +93,29 @@ char *Copyright = "\n"
   "\n";
 
 
+#if !defined(HAVE_SNPRINTF)
+/* Simulate snprintf with vsprintf, hoping that BUFSIZ is large enough.  */
+#include <stdarg.h>
+int
+snprintf (char *buf, size_t n, const char *fmt, ...)
+{
+  int retval;
+  va_list arg;
+
+  va_start (arg, fmt);
+  retval = vsprintf (buf, fmt, arg);
+  va_end (arg);
+  return retval;
+}
+#endif
+
 /*
  * version - return version string
  *
  * This function returns a malloced version string.  This version
  * string does not contain the title, just:
  *
- *		x.y.ztw
+ *		x.y.z.w
  *		x.y.z
  *		x.y
  */
@@ -114,15 +134,17 @@ version(void)
 	/*
 	 * form the version buffer
 	 */
-	if (sizeof(MINOR_PATCH) > 1) {
-	    sprintf(verbuf,
-		"%d.%d.%dt%s", calc_major_ver, calc_minor_ver,
-		 calc_major_patch, calc_minor_patch);
+	if (MINOR_PATCH > 0) {
+		snprintf(verbuf, BUFSIZ,
+		    "%d.%d.%d.%d", calc_major_ver, calc_minor_ver,
+		     calc_major_patch, calc_minor_patch);
 	} else if (MAJOR_PATCH > 0) {
-	    sprintf(verbuf,
-		"%d.%d.%d", calc_major_ver, calc_minor_ver, calc_major_patch);
+		snprintf(verbuf, BUFSIZ,
+		    "%d.%d.%d", calc_major_ver,
+		    calc_minor_ver, calc_major_patch);
 	} else {
-	    sprintf(verbuf, "%d.%d", calc_major_ver, calc_minor_ver);
+		snprintf(verbuf, BUFSIZ,
+		    "%d.%d", calc_major_ver, calc_minor_ver);
 	}
 
 	/*
@@ -131,7 +153,7 @@ version(void)
 	stored_version = (char *)malloc(strlen(verbuf)+1);
 	if (stored_version == NULL) {
 		fprintf(stderr, "%s: version formation value\n", program);
-		exit(2);
+		exit(1);
 	}
 	strcpy(stored_version, verbuf);
 
@@ -144,6 +166,129 @@ version(void)
 
 #if defined(CALC_VER)
 
+
+/*
+ * print_rpm_version - print just the version string, rpm style
+ *
+ * This function prints a version string, rpm style:
+ *
+ *		x.y.z.w-r
+ *		x.y.z-r
+ *		x.y-r
+ *
+ * where 'r' comes from the content of the release file.
+ */
+void
+print_rpm_version(char *release)
+{
+	FILE *file;		/* open file */
+	char buf[BUFSIZ+1];	/* release file buffer */
+	char *p;
+
+	/*
+	 * obtain the release
+	 */
+	file = fopen(release, "r");
+	if (file == NULL) {
+		fprintf(stderr, "%s: cannot open %s: %s\n",
+		    program, release, strerror(errno));
+		exit(2);
+	}
+	buf[BUFSIZ] = '\0';
+	if (fgets(buf, BUFSIZ, file) == NULL) {
+		fprintf(stderr, "%s: cannot read %s: %s\n",
+		    program, release, strerror(errno));
+		exit(3);
+	}
+	p = strchr(buf, '\n');
+	if (p != NULL) {
+		*p = '\0';
+	}
+
+	/*
+	 * form the version buffer
+	 */
+	if (MINOR_PATCH > 0) {
+		printf("%d.%d.%d.%d-%s\n", calc_major_ver, calc_minor_ver,
+				      calc_major_patch, calc_minor_patch, buf);
+	} else if (MAJOR_PATCH > 0) {
+		printf("%d.%d.%d-%s\n", calc_major_ver, calc_minor_ver,
+				     calc_major_patch, buf);
+	} else {
+		printf("%d.%d-%s\n", calc_major_ver, calc_minor_ver, buf);
+	}
+	return;
+}
+
+
+/*
+ * print_rpm_major - print just the major part version string
+ *
+ * This function prints the major part version string:
+ *
+ *		x.y.z
+ *		x.y
+ */
+void
+print_rpm_major(void)
+{
+	/*
+	 * form the version buffer
+	 */
+	if (MAJOR_PATCH > 0) {
+		printf("%d.%d.%d\n", calc_major_ver, calc_minor_ver,
+				     calc_major_patch);
+	} else {
+		printf("%d.%d\n", calc_major_ver, calc_minor_ver);
+	}
+	return;
+}
+
+
+/*
+ * print_rpm_release - print just the rpm release
+ *
+ * This function prints the rpm release:
+ *
+ *		r
+ *
+ * where 'r' comes from the content of the release file.
+ */
+void
+print_rpm_release(char *release)
+{
+	FILE *file;		/* open file */
+	char buf[BUFSIZ+1];	/* release file buffer */
+	char *p;
+
+	/*
+	 * obtain the release
+	 */
+	file = fopen(release, "r");
+	if (file == NULL) {
+		fprintf(stderr, "%s: cannot open %s: %s\n",
+		    program, release, strerror(errno));
+		exit(2);
+	}
+	buf[BUFSIZ] = '\0';
+	if (fgets(buf, BUFSIZ, file) == NULL) {
+		fprintf(stderr, "%s: cannot read %s: %s\n",
+		    program, release, strerror(errno));
+		exit(3);
+	}
+	p = strchr(buf, '\n');
+	if (p != NULL) {
+		*p = '\0';
+	}
+
+	/*
+	 * form the version buffer
+	 */
+	printf("%s\n", buf);
+	return;
+}
+
+
 /*
  * version - print the calc version
  */
@@ -151,9 +296,26 @@ version(void)
 int
 main(int argc, char *argv[])
 {
-    program = argv[0];
-    printf("%s\n", version());
-    return 0;
+	program = argv[0];
+	if (argc == 3 && strcmp(argv[1], "-r") == 0) {
+		print_rpm_version(argv[2]);
+
+	} else if (argc == 3 && strcmp(argv[1], "-R") == 0) {
+		print_rpm_release(argv[2]);
+
+	} else if (argc == 2 && strcmp(argv[1], "-V") == 0) {
+		print_rpm_major();
+
+	} else if (argc == 1) {
+		printf("%s\n", version());
+
+	} else {
+		fprintf(stderr,
+		    "usage: %s [-V] [-R release_file] [-r release_file]\n",
+		    program);
+		exit(4);
+	}
+	return 0;
 }
 
 #endif /* CALC_VER */

win32.mkdef

@@ -36,8 +36,8 @@ HAVE_UNISTD_H=NO
 
 LIBDIR=/lib/calc
 HELPDIR=/lib/calc/help
-INCDIRCALC=/include/calc
-CUSTOMLIBDIR=/lib/calc/custom
+CALC_INCDIR=/include/calc
+CUSTOMCALDIR=/lib/calc/custom
 CUSTOMHELPDIR=/lib/calc/help/custhelp
 SCRIPTDIR=/lib/calc/cscript
 MANDIR=

win32/have_malloc.h

@@ -7,7 +7,7 @@
 #define __HAVE_MALLOC_H__
 
 
-/* do we have /usr/include/malloc.h? */
+/* do we have <malloc.h>? */
 #define HAVE_MALLOC_H	 /* yes */
 
 

win32/have_stdlib.h

@@ -7,7 +7,7 @@
 #define __HAVE_STDLIB_H__
 
 
-/* do we have /usr/include/stdlib.h? */
+/* do we have <stdlib.h>? */
 #define HAVE_STDLIB_H	/* yes */
 
 

win32/have_string.h

@@ -7,7 +7,7 @@
 #define __HAVE_STRING_H__
 
 
-/* do we have /usr/include/string.h? */
+/* do we have <string.h>? */
 #define HAVE_STRING_H	/* yes */
 
 

win32/have_times.h

@@ -7,7 +7,7 @@
 #define __HAVE_TIMES_H__
 
 
-/* do we have /usr/include/times.h? */
+/* do we have <times.h>? */
 #undef HAVE_TIMES_H  /* no */
 #undef HAVE_SYS_TIMES_H  /* no */
 #define HAVE_TIME_H	/* yes */

win32/have_unistd.h

@@ -7,7 +7,7 @@
 #define __HAVE_UNISTD_H__
 
 
-/* do we have /usr/include/unistd.h? */
+/* do we have <unistd.h>? */
 #undef HAVE_UNISTD_H  /* no */
 
 

zmath.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.5 $
- * @(#) $Id: zmath.h,v 29.5 2001/03/17 21:31:47 chongo Exp $
+ * @(#) $Revision: 29.7 $
+ * @(#) $Id: zmath.h,v 29.7 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/zmath.h,v $
  *
  * Under source code control:	1993/07/30 19:42:48
@@ -38,13 +38,21 @@
 #define __ZMATH_H__
 
 
-#include "win32dll.h"
-#include "alloc.h"
-#include "endian_calc.h"
-#include "longbits.h"
-#include "byteswap.h"
-
-#include "have_stdlib.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "win32dll.h"
+# include "alloc.h"
+# include "endian_calc.h"
+# include "longbits.h"
+# include "byteswap.h"
+# include "have_stdlib.h"
+#else
+# include <calc/win32dll.h>
+# include <calc/alloc.h>
+# include <calc/endian_calc.h>
+# include <calc/longbits.h>
+# include <calc/byteswap.h>
+# include <calc/have_stdlib.h>
+#endif
 #ifdef HAVE_STDLIB_H
 # include <stdlib.h>
 #endif

zrand.h

@@ -1,5 +1,5 @@
 /*
- * zrand - additive 55 shuffle generator
+ * zrand - subtractive 100 shuffle generator
  *
  * Copyright (C) 1999  Landon Curt Noll
  *
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: zrand.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: zrand.h,v 29.5 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/zrand.h,v $
  *
  * Under source code control:	1995/01/07 09:45:26
@@ -37,24 +37,29 @@
 #define __ZRAND_H__
 
 
-#include "value.h"
-#include "have_const.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "value.h"
+# include "have_const.h"
+#else
+# include <calc/value.h>
+# include <calc/have_const.h>
+#endif
 
 
 /*
- * a55 generator defines
+ * s100 generator defines
  *
  * NOTE: SBITS must be a power of two to make the (&= (SBITS-1))
  *	 in slotcp() to work.
  */
-#define SBITS (64)	 /* size of additive or shuffle entry in bits */
-#define SBYTES (SBITS/8) /* size of additive or shuffle entry in bytes */
+#define SBITS (64)	 /* size of subtractive or shuffle entry in bits */
+#define SBYTES (SBITS/8) /* size of subtractive or shuffle entry in bytes */
 #define SHALFS (SBYTES/sizeof(HALF))	/* size in HALFs */
 
 /*
  * seed defines
  */
-#define SEEDXORBITS 64		/* low bits of a55 seed devoted to xor */
+#define SEEDXORBITS 64		/* low bits of s100 seed devoted to xor */
 
 /*
  * shuffle table defines
@@ -65,18 +70,18 @@
 #define SHUFMASK (SHUFLEN-1)	/* mask for shuffle table entry selection */
 
 /*
- * additive 55 constants
+ * subtractive 100 constants
  */
-#define A55 55		/* slots in an additive 55 table */
-#define INIT_J 23	/* initial first walking table index */
-#define INIT_K 54	/* initial second walking table index */
+#define S100 100	/* slots in an subtractive 100 table */
+#define INIT_J 36	/* initial first walking table index */
+#define INIT_K 99	/* initial second walking table index */
 
 /*
- * additive 55 table defines
+ * subtractive 100 table defines
  *
- * SLEN		- length in FULLs of an additive 55 slot
+ * SLEN		- length in FULLs of an subtractive 100 slot
  *
- * SVAL(a,b)	- form a 64 bit hex slot entry in the additive 55 table
+ * SVAL(a,b)	- form a 64 bit hex slot entry in the subtractive 100 table
  *		  a: up to 8 hex digits without the leading 0x (upper half)
  *		  b: up to 8 hex digits without the leading 0x (lower half)
  *
@@ -90,12 +95,12 @@
  *
  *	NOTE: Due to a SunOS cc bug, don't put spaces in the SHVAL call!
  *
- * SLOAD(s,i,z) - load table slot i from additive 55 state s with zvalue z
+ * SLOAD(s,i,z) - load table slot i from subtractive 100 state s with zvalue z
  *		  s: type RAND
  *		  i: type int, s.slot[i] slot index
  *		  z: type ZVALUE, what to load into s.slot[i]
  *
- * SADD(s,k,j)	- slot[k] += slot[j]
+ * SSUB(s,k,j)	- slot[k] -= slot[j]
  *		  s: type RAND
  *		  k: type int, s.slot[k] slot index, what to gets changed
  *		  j: type int, s.slot[j] slot index, what to add to s.slot[k]
@@ -106,7 +111,7 @@
  *		  k: type int, s.slot[k] slot index, selects shuffle entry
  *		  result type int, refers to s.shuf[SINDX(s,k)]
  *
- * SBUFFER(s,t) - load a55 buffer with t
+ * SBUFFER(s,t) - load s100 buffer with t
  *		  s: type RAND
  *		  t: type int, s.shuf[t] entry index, replace buffer with it
  *
@@ -130,7 +135,7 @@
  *		  i: type int, s.slot[i] slot index, what gets xored
  *		  v: type FULL*, 64 bit value to xor into s.slot[i]
  *
- * SCNT		- length of an additive 55 table in FULLs
+ * SCNT		- length of an subtractive 100 table in FULLs
  */
 #if FULL_BITS == SBITS
 
@@ -143,7 +148,7 @@
 #  define SHVAL(a,b,c,d) (HALF)0x/**/c/**/d,(HALF)0x/**/a/**/b
 # endif
 #define SLOAD(s,i,z) ((s).slot[i] = ztofull(z))
-#define SADD(s,k,j) ((s).slot[k] += (s).slot[j])
+#define SSUB(s,k,j) ((s).slot[k] -= (s).slot[j])
 #define SINDX(s,k) ((int)((s).slot[k] >> (FULL_BITS - SHUFPOW)))
 #define SBUFFER(s,t) {(s).buffer[0] = ((s).shuf[t] & BASE1); \
 		      (s).buffer[1] = ((s).shuf[t] >> BASEB); \
@@ -176,9 +181,9 @@
 			 (((z).len == 3) ? (FULL)((z).v[2]) : \
 			  ((FULL)((z).v[2]) + ((FULL)((z).v[3]) << BASEB)))); \
 		     }
-#define SADD(s,k,j) {FULL tmp = (s).slot[(k)<<1]; \
-		     (s).slot[(k)<<1] += (s).slot[(j)<<1]; \
-		     (s).slot[1+((k)<<1)] += ((tmp <= (s).slot[(k)<<1]) ? \
+#define SSUB(s,k,j) {FULL tmp = (s).slot[(k)<<1]; \
+		     (s).slot[(k)<<1] -= (s).slot[(j)<<1]; \
+		     (s).slot[1+((k)<<1)] -= ((tmp <= (s).slot[(k)<<1]) ? \
 					       (s).slot[1+((j)<<1)] : \
 					       (s).slot[1+((j)<<1)] + 1); \
 		    }
@@ -213,11 +218,14 @@
 
 #endif
 
-#define SCNT (SLEN*A55)	 /* length of additive 55 table in FULLs */
+#define SCNT (SLEN*S100)	/* length of subtractive 100 table in FULLs */
+
+#define RAND_CONSEQ_USE (100)		  /* use this many before skipping */
+#define RAND_SKIP (1009-RAND_CONSEQ_USE)  /* skip this many after use */
 
 
 /*
- * a55 generator state
+ * s100 generator state
  */
 struct rand {
 	int seeded;		/* 1 => state has been seeded */
@@ -225,15 +233,16 @@ struct rand {
 	FULL buffer[SLEN];	/* unused random bits from last call */
 	int j;			/* first walking table index */
 	int k;			/* second walking table index */
-	FULL slot[SCNT];	/* additive 55 table */
+	int need_to_skip;	/* 1 => skip the next 909 values */
+	FULL slot[SCNT];	/* subtractive 100 table */
 	FULL shuf[SHUFLEN];	/* shuffle table entries */
 };
 
 
 /*
- * a55 generator function declarations
+ * s100 generator function declarations
  */
-extern RAND *zsrand(CONST ZVALUE *seed, CONST MATRIX *pmat55);
+extern RAND *zsrand(CONST ZVALUE *seed, CONST MATRIX *pmat100);
 extern RAND *zsetrand(CONST RAND *state);
 extern void zrandskip(long count);
 extern void zrand(long count, ZVALUE *res);

zrandom.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: zrandom.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: zrandom.c,v 29.3 2001/05/08 06:44:29 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/zrandom.c,v $
  *
  * Under source code control:	1997/02/15 04:01:56
@@ -356,33 +356,33 @@
  *
  *	The pre-defined Blum moduli was computed by searching for Blum
  *	primes (primes == 3 mod 4) starting from new values that
- *	were selected by lavarand, a hardware random number generator.
+ *	were selected by LavaRnd, a hardware random number generator.
  *	See the URL:
  *
- *	    http://lavarand.sgi.com/index.html
+ *	    http://www.LavaRnd.org/
  *
- *	for an explination of how the lavarand random number generator works.
+ *	for an explination of how the LavaRnd random number generator works.
  *
  *	For a given newn, we select a given bit length.	 For 0 < newn <= 20,
  *	the bit length selected was by:
  *
  *	    bitlen = 2^(int((newn-1)/4)+7) + small_random_value;
  *
- *	where small_random_value is also generated by lavarand.	 For
+ *	where small_random_value is also generated by LavaRnd.	 For
  *	1 <= newn <= 16, small_random_value is a random value in [0,40).
  *	For 17 < newn <= 20, small_random_value is a random value in [0,120).
- *	Given two random integers generated by lavarand, we used the following
+ *	Given two random integers generated by LavaRnd, we used the following
  *	to compute Blum primes:
  *
  *	  (* find the first Blum prime *)
- *	  fp = int((ip-1)/2);		(* ip was generated by lavarand *)
+ *	  fp = int((ip-1)/2);		(* ip was generated by LavaRnd *)
  *	  do {
  *	      fp = nextcand(fp+2, 25, 0, 3, 4);
  *	      p = 2*fp+1;
  *	  } while (ptest(p, 25) == 0);
  *
  *	  (* find the 2nd Blum prime *)
- *	  fq = int((iq-1)/2);		(* iq was generated by lavarand *)
+ *	  fq = int((iq-1)/2);		(* iq was generated by LavaRnd *)
  *	  do {
  *	      fq = nextcand(fq+2, 25, 0, 3, 4);
  *	      q = 2*fq+1;
@@ -391,8 +391,8 @@
  *	  (* compute the Blum modulus *)
  *	  n[newn] = p * q;
  *
- *	The pre-defined quadratic residues was also generated by lavarand.
- *	The value produced by lavarand was squared mod the Blum moduli
+ *	The pre-defined quadratic residues was also generated by LavaRnd.
+ *	The value produced by LavaRnd was squared mod the Blum moduli
  *	that was previously computed.
  *
  *	The purpose of these pre-defined Blum moduli is to provide users with

zrandom.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: zrandom.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: zrandom.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/zrandom.h,v $
  *
  * Under source code control:	1997/02/15 04:01:56
@@ -33,8 +33,13 @@
 #define __ZRANDOM_H__
 
 
-#include "value.h"
-#include "have_const.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "value.h"
+# include "have_const.h"
+#else
+# include <calc/value.h>
+# include <calc/have_const.h>
+#endif
 
 
 /*