Release calc version 2.12.1.2

BUGS

@@ -29,18 +29,25 @@ The calc web site is located at:
 =-=
 
 If you have tried all of the above and things still are not right,
-then it may be time to send in a bug report.  You can send bug reports to:
+then it may be time to send in a bug report.  You can send bug
+and bug fixes reports to:
 
     calc-bugs at asthe dot com
 
     [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
     [[ NOTE: The EMail address uses 'asthe', the web site URL uses 'isthe' ]]
 
+Your subject must contain the words:
+
+       calc bug report
+
+You may have additional words in your subject line.
+
 When you send your report, please include the following information:
 
     * a description of the problem
     * the version of calc you are using (if you cannot get calc
-      it to run, then send us the 4 #define lines from version.c)
+      to run, then send us the 4 #define lines from version.c)
     * if you modified calc from an official patch, send me the mods you made
     * the type of system you were using
     * the type of compiler you were using
@@ -54,18 +61,8 @@ When you send your report, please include the following information:
 
 Stack traces from core dumps are useful to send as well.
 
-=-=
-
-Send any comments, compiler warning messages, suggestions and most
-importantly, fixes (in the form of a context diff patch) to:
-
-    calc-bugs at asthe dot com
-
-    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-    [[ NOTE: The EMail address uses 'asthe', the web site URL uses 'isthe' ]]
-
-You should use the above calc-bugs address for bug reports, if you are
-not currently a member of the calc-tester mailing list.
+Fell free to use the above address to send in big fixes (in the form
+of a context diff patch).
 
 =-=
 
@@ -77,65 +74,42 @@ Known bugs:
 
 =-=
 
-Problems with known work-a-rounds:
+mis-features in calc:
+
+    Some problems are not bugs but rarther mis-features / things that could
+    work better.  The following is a list of mis-features that should be
+    addressed and improved someday.
+
+    * The chi.cal resource file does not work well with odd degrees
+      of freedom.  Can someone improve this algorithm?
+
+    * The intfile.cal resource file reads and writes big or little Endian
+      integers to/from files the hard way.  It does NOT use blkcpy.  The
+      following code:
+
+	i = (ord("\n") << 16) | (ord("i") << 8) | ord("H")
+	b = blk()
+	copy(i, b)
+	fd = fopen("file", "w")
+	copy(b, fd);
+	fclose(fd)
+
+      will write an extra NUL octet to the file.  Where as:
+
+	read intfile
+	i = (ord("\n") << 16) | (ord("i") << 8) | ord("H")
+	be2file(i, "file2")
+
+      will not.
+
+=-=
+
+Problems with old systems that have known work-a-rounds:
 
     * There is a bug in gcc-2.95 that causes calc, when compiled with -O2,
       to fail the regression test.  The work-a-round is to compile with -O
       or to use gcc-2.96 or later.
 
-    * Solaris cc somtimes barfs while compiling zrand.c.  In particular, calc
-      barfs on on the SVAL macro.  The work-a-round is to use the Solaric cc
-      Makefile set sets -DFORCE_STDC.  I.e,:
-
-	    CCWARN=
-	    CCOPT= ${DEBUG} ${NO_SHARED}
-	    CCMISC= -DFORCE_STDC
-	    #
-	    CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
-	    ICFLAGS= ${CCWARN} ${CCMISC}
-	    #
-	    LCFLAGS=
-	    LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
-	    ILDFLAGS=
-	    #
-	    LCC= cc
-	    CC= ${PURIFY} ${LCC}
-
-    * There is a bug in some versions of the Dec/Compaq cc for the Alpha
-      where the following:
-
-	    #include <stdio.h>
-	    #define SVAL(a,b) (unsigned long)(0x ## a ## b ## ULL)
-	    main(){SVAL(b8a8aeb0,8168eadc);}
-
-      fails because it puts a space inside the concatenated hex.  Calc
-      has code that is affected by this bug.  This bug has been reported
-      to Compaq and may be fixed in the future.	 A work-a-round is to
-      compile with cc -std0 or to use a later version of their compiler.
-
-    * On a Digital UNIX V4.0F (Rev. 1229) on a 500 Mhz 21264, make check
-      dies a horrible death starting in test 600 and 622 gives 100s of
-      messages for calc version 2.11.0t9.4 using the Dec's cc with -O2:
-
-	600: Beginning test_bignums
-	601: muldivcheck 1
-	**** abc != acb: 602: muldivcheck 2
-	**** acb != bac: 602: muldivcheck 2
-	...
-	**** t4 != a4: 622: algcheck 1
-	**** t5 != a5: 622: algcheck 1
-	**** t6 != a6: 622: algcheck 1
-	**** t4 != a4: 622: algcheck 1
-	...
-
-	it finally hangs at test 2000.
-
-      The work-a-round is to compile calc without the optimizer.  If this
-      happens to you, try compiling without -O and without -O2.	 I.e., in
-      the Makefile, set:
-
-	DEBUG= -g
-
     * There are problems compiling calc on the sparcv9 under 64 bit
       Solaris.	On that platform, gcc-2.96 is able to compile calc, but
       calc dumps core very early on in startup.	 It is said that sparcv9
@@ -151,19 +125,7 @@ Problems with known work-a-rounds:
 	    CCWARN="-DFORCE_STDC -w"
 	    DEBUG="-fast -xarch=v9"
 
-    * Under BSDI v4, the warnings of the form:
-
-	/usr/include/ctype.h:147: warning: `__runetype' defined but not used
-	/usr/include/ctype.h:161: warning: `__isctype' defined but not used
-	/usr/include/ctype.h:170: warning: `toupper' defined but not used
-	/usr/include/ctype.h:177: warning: `tolower' defined but not used
-
-      are seen.	 These warnings are the result of mis-features in BSDI
-      include files.  They do not have an impact on the operation
-      or performance.  The work-a-round is to ignore these warnings
-      under BSDI.
-
-## Copyright (C) 1999  Landon Curt Noll
+## Copyright (C) 1999-2006  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -179,8 +141,8 @@ Problems with known work-a-rounds:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.5 $
-## @(#) $Id: BUGS,v 29.5 2000/06/07 14:02:13 chongo Exp $
+## @(#) $Revision: 29.25 $
+## @(#) $Id: BUGS,v 29.25 2006/08/20 17:51:25 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/BUGS,v $
 ##
 ## Under source code control:	1994/03/18 14:06:13

COPYING

@@ -12,8 +12,8 @@ This file is Copyrighted
 	Everyone is permitted to copy and distribute verbatim copies
 	of this license document, but changing it is not allowed.
 
-    # @(#) $Revision: 29.2 $
-    # @(#) $Id: COPYING,v 29.2 2000/06/07 14:02:13 chongo Exp $
+    # @(#) $Revision: 29.8 $
+    # @(#) $Id: COPYING,v 29.8 2006/05/01 19:16:57 chongo Exp $
     # @(#) $Source: /usr/local/src/cmd/calc/RCS/COPYING,v $
 
 =-=
@@ -55,13 +55,18 @@ Calc is covered by the GNU Lesser General Public License
 
     The contact addresses for calc is as follows:
 
-	Web:	http://www.isthe.com/chongo/tech/comp/calc/index.html
-	EMail:	calc-contrib at asthe dot com
+	Web:	http://www.isthe.com/chongo/tech/comp/calc/email.html
 
-    To join the calc-tester mailing list.  Send a request to:
+    To join the low volume calc mailing list.  Send a EMail message to:
 
 	calc-tester-request at asthe dot com
 
+    Your subject must contain the words:
+
+	calc mailing list subscription
+
+    You may have additional words in your subject line.
+
     Your message body (not the subject) should consist of:
 
 	 subscribe calc-tester address
@@ -71,13 +76,23 @@ Calc is covered by the GNU Lesser General Public License
     where ``address'' is your EMail address and ``your_full_name'' is
     your full name.
 
-    Calc bug reports, however should be sent to:
+    Feel free to follow the name line with additional EMail text as desired.
+
+=-=
+
+    Calc bug reports and calc bug fixes should be sent to:
 
 	calc-bugs at asthe dot com
 
     [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
     [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
 
+    Your subject must contain the words:
+
+	   calc bug report
+
+    You may have additional words in your subject line.
+
 =-=
 
 Calc's relationship to the GNU Lesser General Public License
@@ -140,7 +155,7 @@ Calc copyrights and exception files
 -----------------------------------
 
     With the exception of the files listed below, Calc is covered under
-    the following Copyrights:
+    the following GNU Lesser General Public License Copyrights:
 
 	Copyright (C) year  David I. Bell
 	Copyright (C) year  David I. Bell and Landon Curt Noll
@@ -149,13 +164,13 @@ Calc copyrights and exception files
 	Copyright (C) year  Landon Curt Noll
 	Copyright (C) year  Ernest Bowen and Landon Curt Noll
 	Copyright (C) year  Ernest Bowen
+	Copyright (C) year  Petteri Kettunen and Landon Curt Noll
 
-    A few files are not covered under the GNU Lesser General Public
-    License.  The source files not covered are:
+    These files are not covered under one of the Copyrights listed above:
 
-	    shs1.c	    shs1.h	shs.c		 shs.h
-	    md5.c	    md5.h	lib/qtime.cal	 COPYING
-	    COPYING-LGPL
+	    shs1.c	    shs1.h	 shs.c		shs.h
+	    md5.c	    md5.h	 COPYING	COPYING-LGPL
+	    cal/qtime.cal   cal/screen.cal
 
     The file COPYING-LGPL, which contains a copy of the version 2.1
     GNU Lesser General Public License, is itself Copyrighted by the
@@ -167,6 +182,14 @@ Calc copyrights and exception files
     top of this file.  It is important to note that you may distribute
     verbatim copies of this file but you may not modify this file.
 
+    Some of these exception files are in the public domain.  Other
+    exception files have non-LGPL Copyrights.  Other files are under a
+    LGPL Copyright but have different authors.
+
+    In all cases one may use and distribute these exception files freely.
+    And because one may freely distribute the LGPL covered files, the
+    entire calc source may be freely used and distributed.
+
 =-=
 
 General Copyleft and License info

HOWTO.INSTALL

@@ -1,34 +1,130 @@
-Installing calc in 4 easy steps:
+Installing calc from the gziped tarball in 4 easy steps:
 
-    1) Look at the makefile, and adjust it to suit your needs.
+    0)  If your platform supports i686 RPMs, you may want to go to:
 
-       Here are some Makefile hints:
+	    http://www.isthe.com/chongo/src/calc/
 
-	   Select a compiler set by commenting in the appropriate set
-	   of cc options.  As shipped the Makefile assumes a gcc-like
-	   environment such as Linux.  If a more appropriate cc set if
-	   found below, comment out the Linux set and comment in that
-	   set or edit the gcc set or the common cc set as needed.
+	and use these RPMs:
 
-	   You may or may not need RANLIB when building libraries.
-	   As shipped the Makefile assumes RANLIB is needed.
-	   Comment the in/out the RANLIB value if ranlib does
-	   not work or does not exist.
+	    * calc*.i686.rpm
+		- all that is needed if you just want to use calc
 
-	   You may want to change the default pager used by calc.
-	   As shipped the Makefile assumes 'more'.  On your system
-	   you may find 'less' to be a better pager.
+	    * calc-devel-*.i686.rpm
+	        - calc *.h header and *.a lib files for use in other programs
 
-	   Set TOPDIR to be the place under which help files, calc,
-	   include files and calc libs are to be installed.  As shipped
-	   the Makefile assumes a TOPDIR of /usr/local/lib.
+	    * calc.*.src.rpm
+	        - calc source in RPM package form
 
-	   Set BINDIR to the place where calc is installed.  As shipped
-	   the Makefile assumes a BINDIR /usr/local/bin.
+	The following 4 steps apply to calc source tree that comes from either:
+
+		gunzip -c calc-*.tar.gz | tar -xvf -
+
+	or from:
+
+		rpm -ivh calc-*.src.rpm
+		cd /var/tmp
+		gunzip -c /usr/src/redhat/SOURCES/calc-*.tar.gz | tar -xvf -
+
+    1)	Look at the makefile, and adjust it to suit your needs.
+
+	The Makefile, as shipped, is suitable for installation under
+	Linux and Un*x-like environments.  For the most part, the default
+	values should work.  If in doubt, follow the 'When in doubt'
+	suggestion.
+
+	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+	! If you are building under Windoz or a Windoz-like environment !
+	! (such as Cygwin or DJGPP), read the README.WINDOWS file.      !
+	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+	You should determine if these Makefile variables are reasonable:
+
+	    INCDIR		Where the system include (.h) files are kept.
+	    BINDIR		Where to install calc binary files.
+	    LIBDIR		Where to install calc link library (*.a) files.
+	    CALC_SHAREDIR	Where to install calc help, .cal, startup, and
+	    			config files.
+
+	You may want to change the default installation locations for
+	these values, which are based on the 4 values listed above:
+
+	    HELPDIR            where the help directory is installed
+	    CALC_INCDIR        where the calc include files are installed
+	    CUSTOMCALDIR       where custom *.cal files are installed
+	    CUSTOMHELPDIR      where custom help files are installed
+	    CUSTOMINCPDIR      where custom .h files are installed
+	    SCRIPTDIR          where calc shell scripts are installed
+
+	If you want to install calc files under a top level directory,
+	then set the T value:
+
+	    The calc install is performed under $T, the calc build is
+	    performed under /.	The purpose for $T is to allow someone
+	    to install calc somewhere other than into the system area.
+
+	    For example, if:
+
+	    	BINDIR= /usr/bin
+		LIBDIR= /usr/lib
+		CALC_SHAREDIR= /usr/share/calc
+
+	    and if:
+
+	    	T= /var/tmp/testing
+
+	    Then the installation locations will be:
+
+		calc binary files:	/var/tmp/testing/usr/bin
+		calc link library:	/var/tmp/testing/usr/lib
+		calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+		... etc ...		/var/tmp/testing/...
+
+	    If $T is empty, calc is installed under /, which is the same
+	    top of tree for which it was built.  If $T is non-empty, then
+	    calc is installed under $T, as if one had to chroot under
+	    $T for calc to operate.
+
+	Look for the section that starts:
+
+	    ################
+	    # compiler set #
+	    ################
+
+	    Select a compiler set by commenting in the appropriate set
+	    of cc options.  As shipped the Makefile assumes a gcc-like
+	    environment such as Linux.  If a more appropriate cc set if
+	    found below, comment out the Linux set and comment in that
+	    set or edit the gcc set or the common cc set as needed.
+
+	You may want to change these Makrfile variables from their defaults:
+
+	    RANLIB
+
+		You may or may not need RANLIB when building libraries.
+		As shipped the Makefile assumes RANLIB is needed.
+		Comment the in/out the RANLIB value if ranlib does
+		not work or does not exist.
+
+	    CALCPAGER
+
+		You may want to change the default pager used by calc.
+		As shipped the Makefile assumes 'more'.  On your system
+		you may find 'less' to be a better pager.
+
+	    DEBUG
+
+	       Some compilers (to put it mildly) have bugs.  Sometimes the
+	       DEBUG Makefile variable causes the compiler / optimizer to
+	       produce bad code.  Other compilers do just fine.
+
+	       If possible try to use DEBUG=-O3 -g3 (maximum optimization
+	       and debug symbols).  If the calc test fails (see step 3),
+	       try lowering either the -O value and/or the -g3.  Also try
+	       using -Osomething without -g.
 
 	   Adjust other Makefile variables as needed.
 
-    2) build calc:
+    2)	build calc:
 
 	make all
 
@@ -36,13 +132,14 @@ Installing calc in 4 easy steps:
 	    you may find.  See the BUGS file if you find any compiler
 	    warning or errors.
 
-    3) test calc:
+    3)	test calc:
 
 	make check
 
-	==> If you run into problems, follow the BUGS file instructions.
+	==> If you run into problems, read the BUGS file and follow
+	    the instructions found in there.
 
-    4) install calc:
+    4)	install calc:
 
 	make install
 
@@ -65,8 +162,8 @@ the calc help subsystem.  See the README file for details.
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: HOWTO.INSTALL,v 29.2 2000/06/07 14:02:13 chongo Exp $
+## @(#) $Revision: 29.7 $
+## @(#) $Id: HOWTO.INSTALL,v 29.7 2003/04/15 03:38:34 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/HOWTO.INSTALL,v $
 ##
 ## Under source code control:	1999/09/27 20:48:44

LIBRARY

@@ -48,12 +48,30 @@ convenient for outside use.  So you should read the source for a routine
 to see if it really does what you think it does.  I won't guarantee that
 obscure internal routines won't change or disappear in future releases!
 
-When calc is installed, all of the include files needed to build
-libcalc.a along with the link library itself are installed into ${LIBDIR}.
+When calc is installed, all of libraries are installed into ${LIBDIR}.
+All of the calc header files are installed under ${INCDIRCALC}.
+
+If CALC_SRC is defined, then the calc header files will assume that
+they are in or under the current directory.  However, most external
+programs most likely will not be located under calc'c source tree.
+External programs most likely want to use the installed calc header
+files under ${INCDIRCALC}.  External programs most likely NOT want
+to define CALC_SRC.
 
 External programs may want to compile with:
 
-	-I${LIBDIR} -L${LIBDIR} -lcalc
+	-L${LIBDIR} -lcalc
+
+If custom functions are also used, they may want to compile with:
+
+	-L${LIBDIR} -lcalc -lcustcalc
+
+The CALC_SRC symbol should NOT be defined by default.  However if you are
+feeling pedantic you may want to force CALC_SRC to be undefined:
+
+	-UCALC_SRC
+
+as well.
 
 --------------
 ERROR HANDLING
@@ -471,8 +489,8 @@ need call libcalc_call_me_last() only once.
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: LIBRARY,v 29.2 2000/06/07 14:02:13 chongo Exp $
+## @(#) $Revision: 29.5 $
+## @(#) $Id: LIBRARY,v 29.5 2001/06/08 22:57:35 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/LIBRARY,v $
 ##
 ## Under source code control:	1993/07/30 19:44:49

README

@@ -73,13 +73,19 @@ for a wish/todo list.  Code contributions are welcome.
 
 =-=
 
-To join the calc-tester mailing list.  Send a request to:
+To join the calc-tester mailing list.  Send an EMail message to:
 
     calc-tester-request at asthe dot com
 
     [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
     [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
 
+Your subject must contain the words:
+
+    calc mailing list subscription
+
+You may have additional words in your subject line.
+
 Your message body (not the subject) should consist of:
 
      subscribe calc-tester address
@@ -89,7 +95,11 @@ Your message body (not the subject) should consist of:
 where ``address'' is your EMail address and ``your_full_name'' is
 your full name.
 
-Calc bug reports, however should be sent to:
+Feel free to follow the name line with additional EMail text as desired.
+
+=-=
+
+Send Calc bug and bug fixes to:
 
     calc-bugs at asthe dot com
 
@@ -98,6 +108,12 @@ Calc bug reports, however should be sent to:
 
 but see the BUGS file first.
 
+Your subject must contain the words:
+
+       calc bug report
+
+You may have additional words in your subject line.
+
 The calc web site is located at:
 
 	http://www.isthe.com/chongo/tech/comp/calc/
@@ -118,8 +134,8 @@ The calc web site is located at:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: README,v 29.2 2000/06/07 14:02:13 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: README,v 29.3 2001/06/01 11:26:53 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/README,v $
 ##
 ## Under source code control:	1995/10/25 05:27:59

README.WINDOWS

@@ -0,0 +1,169 @@
+Dear calc user on a Windoz based system,
+
+See the HOWTO.INSTALL file for information on how to build and install calc.
+See also the README file.
+
+NOTE: The main developers do not have access to a Windoz based platform.
+      While we will make an effort to not break calc Windoz based system,
+      our lack of a Windoz test environment will mean we will make mistakes
+      from time to time.  Hopefully Windowz users can overcome these mistakes.
+      Of course you are welcome to send us any patches that fix your
+      Windoz build environment.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+=-= compiling under DJGPP =-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+You might want to try using the DJGPP system to compile calc.  See:
+
+	http://www.delorie.com/djgpp/
+
+for DJGPP details and availability.
+
+To compile with DJGPP, one needs to select a number of Makefile
+variable changes.  Eli Zaretskii <eliz at is dot elta dot co dot il>
+recommends the following settings:
+
+	TERMCONTROL= -DUSE_TERMIOS
+	BYTE_ORDER= -DLITTLE_ENDIAN
+	LONG_BITS= 32
+	HAVE_FPOS_POS= -DHAVE_NO_FPOS_POS
+	FPOS_BITS= 32
+	OFF_T_BITS= 32
+	DEV_BITS= 32
+	INODE_BITS= 32
+	HAVE_USTAT= -DHAVE_NO_USTAT
+	HAVE_GETSID= -DHAVE_NO_GETSID
+	HAVE_GETPGID= -DHAVE_NO_GETPGID
+	HAVE_GETTIME= -DHAVE_NO_GETTIME
+	HAVE_GETPRID= -DHAVE_NO_GETPRID
+	HAVE_URANDOM_H= NO
+	ALIGN32= -UMUST_ALIGN32
+	HAVE_MALLOC_H= YES
+	HAVE_STDLIB_H= YES
+	HAVE_STRING_H= YES
+	HAVE_TIMES_H= NO
+	HAVE_SYS_TIMES_H= YES
+	HAVE_TIME_H= YES
+	HAVE_SYS_TIME_H= YES
+	HAVE_UNISTD_H= YES
+	BINDIR= /dev/env/DJDIR/bin
+	INCDIR= /dev/env/DJDIR/include
+	LIBDIR= /dev/env/DJDIR/lib
+	MANDIR= /dev/env/DJDIR/man/man1
+	CATDIR= /dev/env/DJDIR/man/cat1
+	NROFF= groff
+	CALCPATH= .;./cal;~/.cal;${CALC_SHAREDIR};${CUSTOMCALDIR}
+	CALCRC= ${CALC_SHAREDIR}/startup;~/.calcrc;./.calcinit
+	CALCPAGER= less.exe -ci
+	DEBUG= -O2 -gstabs+
+
+The 'Linux set' or 'gcc set' (see the Select your compiler type section)
+should work for DJGPP systems if you set the above Makefile variables.
+
+Look for Makefile comments of the form:
+
+	# Select ...something... for DJGPP.
+
+Follow those recommendations.  In cases where they conflict with
+the above Makefile list, follow the recommendation in the Makefile.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+=-= compiling with Cygwin =-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+An effort is being made to allow windows users to compile calc using the
+Cygwin project (http://sources.redhat.com/cygwin/) with the GCC compiler
+and Un*x tools for Windows.
+
+The major porting work was performed by Thomas Jones-Low
+(tjoneslo at softstart dot com).  He said:
+
+    I had previous stated to this group that I have successfully managed
+    to port a version of Calc to Windows, and promised some point to
+    post what was required, so here it is.
+
+    One obvious manner of doing this port is to get the latest version
+    of the Cygwin project (http://sources.redhat.com/cygwin/) with the
+    GCC compiler and Un*x tools for Windows and recompile.
+
+    I built my working version using Calc ... I am using Visual C++
+    version 7.0, which is an older version of the Microsoft development
+    tools. The make file provided with Calc is not compatible with
+    NMAKE, so I used the Visual Studio tools to generate another one
+    (not included). Calc is built in two parts, calc.dll, which is the
+    library, and calc.exe which is the command line interface.
+
+He recommended that you generate by hand all of the header files that
+by the Makefile.  This has been done for you via the makefile rule:
+
+	make win32_hsrc
+
+which uses the Makefile variables in win32.mkdef to form these header
+files under win32 directory.
+
+You will find generated versions of these files located in the win32
+sub-directory.  These files may be appropriate for your Cygwin building
+needs.
+
+In particular:
+
+	Just copy the win32/*.[ch] files up into the top level calc
+	source directory, edit them (if needed) and build using the
+	Cygwin GCC compiler and Cygwin build environment.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+=-=-= calc maintenance folk =-=-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+People who maintain calc need to keep in mind the following:
+
+The following was added to opcodes.h, config.h, zmath.h and value.h:
+
+	#if defined(_WIN32)
+	#ifdef _EXPORTING
+	  #define DLL	__declspec(dllexport)
+	#else
+	  #define DLL	__declspec(dllimport)
+	#endif
+
+	#else /* Windoz free systems */
+
+	  #define DLL
+
+	#endif /* Windoz free systems */
+
+Then DLL was added in front of all the exported functions.  For example:
+
+    extern int configtype(char*);
+
+was changed to:
+
+    DLL extern int configtype(char*);
+
+
+## Copyright (C) 2002  Landon Curt Noll and Thomas Jones-Low
+##
+## Calc is open software; you can redistribute it and/or modify it under
+## the terms of the version 2.1 of the GNU Lesser General Public License
+## as published by the Free Software Foundation.
+##
+## Calc is distributed in the hope that it will be useful, but WITHOUT
+## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+## or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+## Public License for more details.
+##
+## A copy of version 2.1 of the GNU Lesser General Public License is
+## distributed with calc under the filename COPYING-LGPL.  You should have
+## received a copy with calc; if not, write to Free Software Foundation, Inc.
+## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+##
+## @(#) $Revision: 29.12 $
+## @(#) $Id: README.WINDOWS,v 29.12 2004/07/28 12:52:01 chongo Exp $
+## @(#) $Source: /usr/local/src/cmd/calc/RCS/README.WINDOWS,v $
+##
+## Under source code control:	2001/02/25 14:00:05
+## File existed as early as:	2001
+##
+## chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+## Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/

addop.c

@@ -1,7 +1,7 @@
 /*
  * addop - add opcodes to a function being compiled
  *
- * Copyright (C) 1999  David I. Bell and Ernest Bowen
+ * Copyright (C) 1999-2006  David I. Bell and Ernest Bowen
  *
  * Primary author:  David I. Bell
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: addop.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.13 $
+ * @(#) $Id: addop.c,v 29.13 2006/06/20 10:28:06 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/addop.c,v $
  *
  * Under source code control:	1990/02/15 01:48:10
@@ -44,7 +44,7 @@
 #define OPCODEALLOCSIZE 100	/* reallocate size for opcodes in functions */
 
 
-static long maxopcodes;		/* number of opcodes available */
+static unsigned long maxopcodes;/* number of opcodes available */
 static long newindex;		/* index of new function */
 static char *newname;		/* name of new function */
 static long oldop;		/* previous opcode */
@@ -184,8 +184,8 @@ void
 endfunc(void)
 {
 	register FUNC *fp;		/* function just finished */
-	unsigned long size;		/* size of just created function */
-	long index;
+	size_t size;			/* size of just created function */
+	unsigned long index;
 
 	if (oldop != OP_RETURN) {
 		addop(OP_UNDEF);
@@ -195,8 +195,8 @@ endfunc(void)
 	checklabels();
 
 	if (errorcount) {
-		printf("\"%s\": %ld error%s\n", newname, errorcount,
-			((errorcount == 1) ? "" : "s"));
+		scanerror(T_NULL,"Compilation of \"%s\" failed: %ld error(s)",
+			 newname, errorcount);
 		return;
 	}
 	size = funcsize(curfunc->f_opcodecount);
@@ -208,10 +208,10 @@ endfunc(void)
 	memcpy((char *) fp, (char *) curfunc, size);
 	if (curfunc != functemplate)
 		free(curfunc);
-	if (conf->traceflags & TRACE_FNCODES) {
+	if (newname[0] != '*' && (conf->traceflags & TRACE_FNCODES)) {
 		dumpnames = TRUE;
 		for (size = 0; size < fp->f_opcodecount; ) {
-			printf("%ld: ", (long)size);
+			printf("%ld: ", (unsigned long)size);
 			size += dumpop(&fp->f_opcodes[size]);
 		}
 	}
@@ -280,12 +280,13 @@ rmuserfunc(char *name)
 
 	index = findstr(&funcnames, name);
 	if (index < 0) {
-		fprintf(stderr, "%s() has never been defined\n",
-			name);
+		warning("No function named \"%s\" to be undefined", name);
 		return;
 	}
-	if (functions[index] == NULL)
+	if (functions[index] == NULL) {
+		warning("No defined function \"%s\" to be undefined", name);
 		return;
+	}
 	freenumbers(functions[index]);
 	free(functions[index]);
 	if ((inputisterminal() && conf->resource_debug & RSCDBG_STDIN_FUNC) ||
@@ -302,7 +303,7 @@ void
 freefunc(FUNC *fp)
 {
 	long index;
-	long i;
+	unsigned long i;
 
 	if (fp == NULL)
 		return;
@@ -318,7 +319,7 @@ freefunc(FUNC *fp)
 			/*NOTREACHED*/
 		}
 	}
-	if (conf->traceflags & TRACE_FNCODES) {
+	if (newname[0] != '*' && (conf->traceflags & TRACE_FNCODES)) {
 		printf("Freeing function \"%s\"\n",namestr(&funcnames,index));
 		dumpnames = FALSE;
 		for (i = 0; i < fp->f_opcodecount; ) {
@@ -383,7 +384,7 @@ clearopt(void)
 FUNC *
 findfunc(long index)
 {
-	if ((unsigned long) index >= funccount) {
+	if (index >= funccount) {
 		math_error("Undefined function");
 		/*NOTREACHED*/
 	}
@@ -451,124 +452,122 @@ addop(long op)
 	 * slightly optimize the code depending on the various combinations.
 	 */
 	switch (op) {
-		case OP_GETVALUE:
-			switch (oldop) {
-				case OP_NUMBER:
-				case OP_ZERO:
-				case OP_ONE:
-				case OP_IMAGINARY:
-				case OP_GETEPSILON:
-				case OP_SETEPSILON:
-				case OP_STRING:
-				case OP_UNDEF:
-				case OP_GETCONFIG:
-				case OP_SETCONFIG:
-					return;
-				case OP_DUPLICATE:
-					diff = 1;
-					oldop = OP_DUPVALUE;
-					break;
-				case OP_FIADDR:
-					diff = 1;
-					oldop = OP_FIVALUE;
-					break;
-				case OP_GLOBALADDR:
-					diff = 1 + PTR_SIZE;
-					oldop = OP_GLOBALVALUE;
-					break;
-				case OP_LOCALADDR:
-					oldop = OP_LOCALVALUE;
-					break;
-				case OP_PARAMADDR:
-					oldop = OP_PARAMVALUE;
-					break;
-				case OP_ELEMADDR:
-					oldop = OP_ELEMVALUE;
-					break;
-				default:
-					cut = FALSE;
+	case OP_GETVALUE:
+		switch (oldop) {
+		case OP_NUMBER:
+		case OP_ZERO:
+		case OP_ONE:
+		case OP_IMAGINARY:
+		case OP_GETEPSILON:
+		case OP_SETEPSILON:
+		case OP_STRING:
+		case OP_UNDEF:
+		case OP_GETCONFIG:
+		case OP_SETCONFIG:
+			return;
+		case OP_DUPLICATE:
+			diff = 1;
+			oldop = OP_DUPVALUE;
+			break;
+		case OP_FIADDR:
+			diff = 1;
+			oldop = OP_FIVALUE;
+			break;
+		case OP_GLOBALADDR:
+			diff = 1 + PTR_SIZE;
+			oldop = OP_GLOBALVALUE;
+			break;
+		case OP_LOCALADDR:
+			oldop = OP_LOCALVALUE;
+			break;
+		case OP_PARAMADDR:
+			oldop = OP_PARAMVALUE;
+			break;
+		case OP_ELEMADDR:
+			oldop = OP_ELEMVALUE;
+			break;
+		default:
+			cut = FALSE;
 
-			}
-			if (cut) {
-				fp->f_opcodes[count - diff] = oldop;
-				return;
-			}
+		}
+		if (cut) {
+			fp->f_opcodes[count - diff] = oldop;
+			return;
+		}
+		break;
+	case OP_POP:
+		switch (oldop) {
+		case OP_ASSIGN:
+			fp->f_opcodes[count-1] = OP_ASSIGNPOP;
+			oldop = OP_ASSIGNPOP;
+			return;
+		case OP_NUMBER:
+		case OP_IMAGINARY:
+			q = constvalue(fp->f_opcodes[count-1]);
+			qfree(q);
 			break;
-		case OP_POP:
-			switch (oldop) {
-			case OP_ASSIGN:
-				fp->f_opcodes[count-1] = OP_ASSIGNPOP;
-				oldop = OP_ASSIGNPOP;
-				return;
-			case OP_NUMBER:
-			case OP_IMAGINARY:
-				q = constvalue(fp->f_opcodes[count-1]);
-				qfree(q);
-				break;
-			case OP_STRING:
-				sfree(findstring((long)fp->f_opcodes[count-1]));
-				break;
-			case OP_LOCALADDR:
-			case OP_PARAMADDR:
-				break;
-			case OP_GLOBALADDR:
-				diff = 1 + PTR_SIZE;
-				break;
-			case OP_UNDEF:
-				fp->f_opcodecount -= 1;
-				oldop = OP_NOP;
-				oldoldop = OP_NOP;
-				return;
-			default:
-				cut = FALSE;
-			}
-			if (cut) {
-				fp->f_opcodecount -= diff;
-				oldop = OP_NOP;
-				oldoldop = OP_NOP;
-				fprintf(stderr,
-					"Line %ld: unused value ignored\n",
-					linenumber());
-				return;
-			}
+		case OP_STRING:
+			sfree(findstring((long)fp->f_opcodes[count-1]));
 			break;
-		case OP_NEGATE:
-			if (oldop == OP_NUMBER) {
-				q = constvalue(fp->f_opcodes[count-1]);
-				fp->f_opcodes[count-1] = addqconstant(qneg(q));
-				qfree(q);
-				return;
-			}
+		case OP_LOCALADDR:
+		case OP_PARAMADDR:
+			break;
+		case OP_GLOBALADDR:
+			diff = 1 + PTR_SIZE;
+			break;
+		case OP_UNDEF:
+			fp->f_opcodecount -= 1;
+			oldop = OP_NOP;
+			oldoldop = OP_NOP;
+			return;
+		default:
+			cut = FALSE;
+		}
+		if (cut) {
+			fp->f_opcodecount -= diff;
+			oldop = OP_NOP;
+			oldoldop = OP_NOP;
+			warning("Constant before comma operator");
+			return;
+		}
+		break;
+	case OP_NEGATE:
+		if (oldop == OP_NUMBER) {
+			q = constvalue(fp->f_opcodes[count-1]);
+			fp->f_opcodes[count-1] = addqconstant(qneg(q));
+			qfree(q);
+			return;
+		}
 	}
 	if (oldop == OP_NUMBER) {
 		if (oldoldop == OP_NUMBER) {
 			q1 = constvalue(fp->f_opcodes[count - 3]);
 			q2 = constvalue(fp->f_opcodes[count - 1]);
 			switch (op) {
-				case OP_DIV:
-					if (qiszero(q2)) {
-						cut = FALSE;
-						break;
-					}
-					q = qqdiv(q1,q2);
-					break;
-				case OP_MUL:
-					q = qmul(q1,q2);
-					break;
-				case OP_ADD:
-					q = qqadd(q1,q2);
-					break;
-				case OP_SUB:
-					q = qsub(q1,q2);
-					break;
-				case OP_POWER:
-					if (qisfrac(q2) || qisneg(q2))
-						cut = FALSE;
-					else
-						q = qpowi(q1,q2);
-					break;
-				default:
+			case OP_DIV:
+				if (qiszero(q2)) {
 					cut = FALSE;
+					break;
+				}
+				q = qqdiv(q1,q2);
+				break;
+			case OP_MUL:
+				q = qmul(q1,q2);
+				break;
+			case OP_ADD:
+				q = qqadd(q1,q2);
+				break;
+			case OP_SUB:
+				q = qsub(q1,q2);
+				break;
+			case OP_POWER:
+				if (qisfrac(q2) || qisneg(q2))
+					cut = FALSE;
+				else
+					q = qpowi(q1,q2);
+				break;
+			default:
+				cut = FALSE;
 			}
 			if (cut) {
 				qfree(q1);

alloc.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: alloc.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: alloc.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/alloc.h,v $
  *
  * Under source code control:	1990/02/15 01:48:29
@@ -32,10 +32,17 @@
 #define __ALLOC_H__
 
 
-#include "have_malloc.h"
-#include "have_newstr.h"
-#include "have_string.h"
-#include "have_memmv.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "have_malloc.h"
+# include "have_newstr.h"
+# include "have_string.h"
+# include "have_memmv.h"
+#else
+# include <calc/have_malloc.h>
+# include <calc/have_newstr.h>
+# include <calc/have_string.h>
+# include <calc/have_memmv.h>
+#endif
 
 #ifdef HAVE_MALLOC_H
 # include <malloc.h>

blkcpy.c

@@ -1,7 +1,7 @@
 /*
  * blkcpy - general values and related routines used by the calculator
  *
- * Copyright (C) 1999  Landon Curt Noll and Ernest Bowen
+ * Copyright (C) 1999-2006  Landon Curt Noll and Ernest Bowen
  *
  * Primary author:  Landon Curt Noll
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: blkcpy.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.9 $
+ * @(#) $Id: blkcpy.c,v 29.9 2006/05/20 08:43:55 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/blkcpy.c,v $
  *
  * Under source code control:	1997/04/18 20:41:26
@@ -73,51 +73,51 @@ copystod(VALUE *svp, long ssi, long num, VALUE *dvp, long dsi)
 	 * determine/check source type
 	 */
 	switch(svp->v_type) {
-		case V_NBLOCK:
-			if (svp->v_nblock->subtype & V_NOCOPYFROM)
-				return E_COPY15;
-			sblk = svp->v_nblock->blk;
-			if (sblk->data == NULL)
-				return E_COPY8;
-			break;
-		case V_BLOCK:
-			sblk = svp->v_block;
-			break;
-		case V_STR:
-		case V_OCTET:
-		case V_NUM:
-		case V_FILE:
-		case V_MAT:
-		case V_LIST:
-			break;
-		default:
-			return E_COPY9;
+	case V_NBLOCK:
+		if (svp->v_nblock->subtype & V_NOCOPYFROM)
+			return E_COPY15;
+		sblk = svp->v_nblock->blk;
+		if (sblk->data == NULL)
+			return E_COPY8;
+		break;
+	case V_BLOCK:
+		sblk = svp->v_block;
+		break;
+	case V_STR:
+	case V_OCTET:
+	case V_NUM:
+	case V_FILE:
+	case V_MAT:
+	case V_LIST:
+		break;
+	default:
+		return E_COPY9;
 	}
 
 	/*
 	 * determine/check destination type
 	 */
 	switch(dvp->v_type) {
-		case V_NBLOCK:
-			if (dvp->v_nblock->subtype & V_NOCOPYTO)
-				return E_COPY16;
-			noreloc |=((dvp->v_nblock->subtype & V_NOREALLOC) != 0);
-			dblk = dvp->v_nblock->blk;
-			if (dblk->data == NULL)
-				return E_COPY10;
-			break;
-		case V_BLOCK:
-			noreloc = ((dvp->v_subtype & V_NOREALLOC) != 0);
-			dblk = dvp->v_block;
-			break;
-		case V_STR:
-		case V_NUM:
-		case V_FILE:
-		case V_MAT:
-		case V_LIST:
-			break;
-		default:
-			return E_COPY11;
+	case V_NBLOCK:
+		if (dvp->v_nblock->subtype & V_NOCOPYTO)
+			return E_COPY16;
+		noreloc |=((dvp->v_nblock->subtype & V_NOREALLOC) != 0);
+		dblk = dvp->v_nblock->blk;
+		if (dblk->data == NULL)
+			return E_COPY10;
+		break;
+	case V_BLOCK:
+		noreloc = ((dvp->v_subtype & V_NOREALLOC) != 0);
+		dblk = dvp->v_block;
+		break;
+	case V_STR:
+	case V_NUM:
+	case V_FILE:
+	case V_MAT:
+	case V_LIST:
+		break;
+	default:
+		return E_COPY11;
 	}
 
 	/*
@@ -280,20 +280,20 @@ copymat2mat(MATRIX *smat, long ssi, long num, MATRIX *dmat, long dsi)
 	VALUE *vp;
 	VALUE *vq;
 	VALUE *vtemp;
-	short subtype;
+	unsigned short subtype;
 
 	if (ssi > smat->m_size)
 		return E_COPY2;
 
 	if (num < 0)
 		num = smat->m_size - ssi;
-	if ((USB32) ssi + num > smat->m_size)
+	if (ssi + num > smat->m_size)
 		return E_COPY5;
 	if (num == 0)
 		return 0;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > dmat->m_size)
+	if (dsi + num > dmat->m_size)
 		return E_COPY7;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
 	if (vtemp == NULL) {
@@ -311,7 +311,7 @@ copymat2mat(MATRIX *smat, long ssi, long num, MATRIX *dmat, long dsi)
 		subtype = vq->v_subtype;
 		freevalue(vq);
 		*vq = *vp;
-		vq->v_subtype = subtype;
+		vq->v_subtype |= subtype;
 	}
 	free(vtemp);
 	return 0;
@@ -329,19 +329,19 @@ copyblk2mat(BLOCK *blk, long ssi, long num, MATRIX *dmat, long dsi)
 	VALUE *vq;
 	VALUE *vtemp;
 	long i;
-	short subtype;
+	unsigned short subtype;
 
 	if (ssi > blk->datalen)
 		return E_COPY2;
 	if (num < 0)
 		num = blk->datalen - ssi;
-	if ((USB32) ssi + num > blk->datalen)
+	if (ssi + num > blk->datalen)
 		return E_COPY5;
 	if (num == 0)
 		return 0;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > dmat->m_size)
+	if (dsi + num > dmat->m_size)
 		return E_COPY7;
 	op = blk->data + ssi;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
@@ -363,7 +363,7 @@ copyblk2mat(BLOCK *blk, long ssi, long num, MATRIX *dmat, long dsi)
 		subtype = vq->v_subtype;
 		freevalue(vq);
 		*vq = *vp;
-		vq->v_subtype = subtype;
+		vq->v_subtype |= subtype;
 	}
 	free(vtemp);
 	return 0;
@@ -389,7 +389,7 @@ copymat2blk(MATRIX *smat, long ssi, long num, BLOCK *dblk, long dsi, BOOL norelo
 		num = smat->m_size - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > smat->m_size)
+	if (ssi + num > smat->m_size)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = dblk->datalen;
@@ -429,6 +429,7 @@ copymat2list(MATRIX *smat, long ssi, long num, LIST *lp, long dsi)
 	LISTELEM *ep;
 	VALUE *vtemp;
 	long i;
+	unsigned short subtype;
 
 	if (ssi > smat->m_size)
 		return E_COPY2;
@@ -436,11 +437,11 @@ copymat2list(MATRIX *smat, long ssi, long num, LIST *lp, long dsi)
 		num = smat->m_size - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > smat->m_size)
+	if (ssi + num > smat->m_size)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > lp->l_count)
+	if (dsi + num > lp->l_count)
 		return E_COPY7;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
 	if (vtemp == NULL) {
@@ -456,8 +457,10 @@ copymat2list(MATRIX *smat, long ssi, long num, LIST *lp, long dsi)
 	ep = listelement(lp, (long) dsi);
 	i = num;
 	while (i-- > 0) {
+		subtype = ep->e_value.v_subtype;
 		freevalue(&ep->e_value);
 		ep->e_value = *vq++;
+		ep->e_value.v_subtype |= subtype;
 		ep = ep->e_next;
 	}
 	free(vtemp);
@@ -476,7 +479,7 @@ copylist2mat(LIST *lp, long ssi, long num, MATRIX *dmat, long dsi)
 	LISTELEM *ep;
 	VALUE *vtemp;
 	long i;
-	short subtype;
+	unsigned short subtype;
 
 	if (ssi > lp->l_count)
 		return E_COPY2;
@@ -484,11 +487,11 @@ copylist2mat(LIST *lp, long ssi, long num, MATRIX *dmat, long dsi)
 		num = lp->l_count - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > lp->l_count)
+	if (ssi + num > lp->l_count)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > dmat->m_size)
+	if (dsi + num > dmat->m_size)
 		return E_COPY7;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
 	if (vtemp == NULL) {
@@ -508,7 +511,7 @@ copylist2mat(LIST *lp, long ssi, long num, MATRIX *dmat, long dsi)
 		subtype = vq->v_subtype;
 		freevalue(vq);
 		*vq = *vp;
-		vq->v_subtype = subtype;
+		vq->v_subtype |= subtype;
 	}
 	free(vtemp);
 	return 0;
@@ -526,6 +529,7 @@ copylist2list(LIST *slp, long ssi, long num, LIST *dlp, long dsi)
 	LISTELEM *dep;
 	VALUE *vtemp;
 	VALUE *vp;
+	unsigned short subtype;
 
 	if (ssi > slp->l_count)
 		return E_COPY2;
@@ -533,11 +537,11 @@ copylist2list(LIST *slp, long ssi, long num, LIST *dlp, long dsi)
 		num = slp->l_count - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > slp->l_count)
+	if (ssi + num > slp->l_count)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > dlp->l_count)
+	if (dsi + num > dlp->l_count)
 		return E_COPY7;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
 	if (vtemp == NULL) {
@@ -555,8 +559,10 @@ copylist2list(LIST *slp, long ssi, long num, LIST *dlp, long dsi)
 	vp = vtemp;
 	i = num;
 	while (i-- > 0) {
+		subtype = dep->e_value.v_subtype;
 		freevalue(&dep->e_value);
 		dep->e_value = *vp++;
+		dep->e_value.v_subtype |= subtype;
 		dep = dep->e_next;
 	}
 	free(vtemp);
@@ -572,7 +578,7 @@ copyblk2file(BLOCK *sblk, long ssi, long num, FILEID id, long dsi)
 {
 	FILEIO	*fiop;
 	FILE	*fp;
-	unsigned int	numw;
+	long	numw;
 
 	if (ssi > sblk->datalen)
 		return E_COPY2;
@@ -581,7 +587,7 @@ copyblk2file(BLOCK *sblk, long ssi, long num, FILEID id, long dsi)
 	if (num == 0)
 		return 0;
 
-	fiop = findid(id, 'w');
+	fiop = findid(id, TRUE);
 	if (fiop == NULL)
 		return E_COPYF1;
 	fp = fiop->fp;
@@ -609,7 +615,7 @@ copyfile2blk(FILEID id, long ssi, long num, BLOCK *dblk, long dsi, BOOL noreloc)
 {
 	FILEIO	*fiop;
 	FILE	*fp;
-	unsigned int	numw;
+	long	numw;
 	ZVALUE	fsize;
 	long	filelen;
 	long	newlen;
@@ -618,7 +624,7 @@ copyfile2blk(FILEID id, long ssi, long num, BLOCK *dblk, long dsi, BOOL noreloc)
 
 	if (id < 3)			/* excludes copying from stdin */
 		return E_COPYF1;
-	fiop = findid(id, 'r');
+	fiop = findid(id, FALSE);
 	if (fiop == NULL)
 		return E_COPYF1;
 
@@ -639,7 +645,7 @@ copyfile2blk(FILEID id, long ssi, long num, BLOCK *dblk, long dsi, BOOL noreloc)
 		num = filelen - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > filelen)
+	if (ssi + num > filelen)
 		return E_COPY5;
 	if (fseek(fp, ssi, 0))		/* using system fseek  XXX */
 		return E_COPYF2;
@@ -677,7 +683,7 @@ copystr2file(STRING *str, long ssi, long num, FILEID id, long dsi)
 {
 	long len;
 	FILEIO *fiop;
-	unsigned int numw;
+	long numw;
 	FILE *fp;
 
 	len = str->s_len;
@@ -688,9 +694,9 @@ copystr2file(STRING *str, long ssi, long num, FILEID id, long dsi)
 		num = len - ssi;
 	if (num <= 0)			/* Nothing to be copied */
 		return 0;
-	if ((USB32) ssi + num > len)
+	if (ssi + num > len)
 		return E_COPY5;		/* Insufficient memory in str */
-	fiop = findid(id, 'w');
+	fiop = findid(id, TRUE);
 	if (fiop == NULL)
 		return E_COPYF1;
 	fp = fiop->fp;
@@ -726,7 +732,7 @@ copyblk2blk(BLOCK *sblk, long ssi, long num, BLOCK *dblk, long dsi, BOOL noreloc
 		num = sblk->datalen - ssi;
 	if (num == 0)			/* Nothing to be copied */
 		return 0;
-	if ((unsigned int) ssi + num > sblk->datalen)
+	if (ssi + num > sblk->datalen)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = dblk->datalen;
@@ -806,13 +812,13 @@ copystr2str(STRING *sstr, long ssi, long num, STRING *dstr, long dsi)
 {
 	char *c, *c1;
 
-	if (num < 0 || ssi + num > sstr->s_len)
+	if (num < 0 || (size_t)(ssi + num) > sstr->s_len)
 		num = sstr->s_len - ssi;
 	if (num <= 0)
 		return 0;		/* Nothing to be copied */
 	if (dsi < 0)			/* default destination index */
 		dsi = 0;
-	if (dsi + num > dstr->s_len)
+	if ((size_t)(dsi + num) > dstr->s_len)
 		num = dstr->s_len - dsi;
 	c1 = sstr->s_str + ssi;
 	c = dstr->s_str + dsi;
@@ -838,7 +844,7 @@ copyblk2str(BLOCK *sblk, long ssi, long num, STRING *dstr, long dsi)
 		return 0;		/* Nothing to be copied */
 	if (dsi < 0)			/* default destination index */
 		dsi = 0;
-	if (dsi + num > dstr->s_len)
+	if ((size_t)(dsi + num) > dstr->s_len)
 		num = dstr->s_len - dsi;
 	c1 = sblk->data + ssi;
 	c = (USB8 *)dstr->s_str + dsi;
@@ -852,18 +858,18 @@ copyblk2str(BLOCK *sblk, long ssi, long num, STRING *dstr, long dsi)
 int
 copyostr2str(char *sstr, long ssi, long num, STRING *dstr, long dsi)
 {
-	long len;
+	size_t len;
 	char	*c, *c1;
 
-	len = (long)strlen(sstr);
+	len = strlen(sstr);
 
-	if (num < 0 || ssi + num > len)
+	if (num < 0 || (size_t)(ssi + num) > len)
 		num = len - ssi;
 	if (num <= 0)			/* Nothing to be copied */
 		return 0;
 	if (dsi < 0)
 		dsi = 0;		/* Default destination index */
-	if (dsi + num > dstr->s_len)
+	if ((size_t)(dsi + num) > dstr->s_len)
 		num = dstr->s_len - dsi;
 	c1 = sstr + ssi;
 	c = dstr->s_str + dsi;
@@ -879,16 +885,16 @@ copyostr2str(char *sstr, long ssi, long num, STRING *dstr, long dsi)
 int
 copyostr2blk(char *str,long ssi,long num,BLOCK *dblk,long dsi,BOOL noreloc)
 {
-	int	len;
-	int	newlen;
-	int	newsize;
+	size_t	len;
+	size_t	newlen;
+	size_t	newsize;
 	USB8	*newdata;
 
 	len = strlen(str) + 1;
 
-	if (ssi > len)
+	if (ssi > 0 && (size_t)ssi > len)
 		return E_COPY2;
-	if (num < 0 || (unsigned long) ssi + num > len)
+	if (num < 0 || (size_t)(ssi + num) > len)
 		num = len - ssi;
 	if (num <= 0)			/* Nothing to be copied */
 		return 0;
@@ -897,7 +903,7 @@ copyostr2blk(char *str,long ssi,long num,BLOCK *dblk,long dsi,BOOL noreloc)
 	newlen = dsi + num;
 	if (newlen <= 0)
 		return E_COPY7;
-	if (newlen >= dblk->maxsize) {
+	if (newlen >= (size_t)dblk->maxsize) {
 		if (noreloc)
 			return E_COPY17;
 		newsize = (1 + newlen/dblk->blkchunk) * dblk->blkchunk;
@@ -910,7 +916,7 @@ copyostr2blk(char *str,long ssi,long num,BLOCK *dblk,long dsi,BOOL noreloc)
 		dblk->maxsize = newsize;
 	}
 	memmove(dblk->data + dsi, str + ssi, num);
-	if (newlen > dblk->datalen)
+	if (newlen > (size_t)dblk->datalen)
 		dblk->datalen = newlen;
 	return 0;
 }
@@ -978,8 +984,8 @@ memmove(void *s1, const void *s2, CALC_SIZE_T n)
 int
 copynum2blk(NUMBER *snum, long ssi, long num, BLOCK *dblk, long dsi, BOOL noreloc)
 {
-	long	newlen;
-	long	newsize;
+	size_t	newlen;
+	size_t	newsize;
 	USB8	*newdata;
 #if CALC_BYTE_ORDER == BIG_ENDIAN
 	ZVALUE	*swnum; /* byte swapped numerator */
@@ -991,14 +997,14 @@ copynum2blk(NUMBER *snum, long ssi, long num, BLOCK *dblk, long dsi, BOOL norelo
 		num = snum->num.len - ssi;
 	if (num == 0)			/* Nothing to be copied */
 		return 0;
-	if ((unsigned long) ssi + num > snum->num.len)
+	if (ssi + num > snum->num.len)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = dblk->datalen;
-	newlen = dsi + (long)(num*sizeof(HALF));
+	newlen = dsi + (num*sizeof(HALF));
 	if (newlen <= 0)
 		return E_COPY7;
-	if (newlen >= dblk->maxsize) {
+	if (newlen >= (size_t)dblk->maxsize) {
 		if (noreloc)
 			return E_COPY17;
 		newsize = (1 + newlen/dblk->blkchunk) * dblk->blkchunk;
@@ -1017,7 +1023,7 @@ copynum2blk(NUMBER *snum, long ssi, long num, BLOCK *dblk, long dsi, BOOL norelo
 	memmove(dblk->data+dsi, (char *)(swnum->v+ssi), num*sizeof(HALF));
 	zfree(*swnum);
 #endif
-	if (newlen > dblk->datalen)
+	if (newlen > (size_t)dblk->datalen)
 		dblk->datalen = newlen;
 	return 0;
 }
@@ -1029,7 +1035,7 @@ copynum2blk(NUMBER *snum, long ssi, long num, BLOCK *dblk, long dsi, BOOL norelo
 int
 copyblk2num(BLOCK *sblk, long ssi, long num, NUMBER *dnum, long dsi, NUMBER **res)
 {
-	long	newlen;
+	size_t	newlen;
 	NUMBER *ret;		/* cloned and modified numerator */
 #if CALC_BYTE_ORDER == BIG_ENDIAN
 	HALF *swapped;		/* byte swapped input data */
@@ -1044,11 +1050,11 @@ copyblk2num(BLOCK *sblk, long ssi, long num, NUMBER *dnum, long dsi, NUMBER **re
 		num = sblk->datalen - ssi;
 	if (num == 0)			/* Nothing to be copied */
 		return 0;
-	if ((unsigned long) ssi + num > sblk->datalen)
+	if (ssi + num > sblk->datalen)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = dnum->num.len;
-	newlen = dsi + (long)((num+sizeof(HALF)-1)/sizeof(HALF));
+	newlen = dsi + ((num+sizeof(HALF)-1)/sizeof(HALF));
 	if (newlen <= 0)
 		return E_COPY7;
 

block.c

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: block.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: block.c,v 29.3 2006/05/01 19:16:57 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/block.c,v $
  *
  * Under source code control:	1997/02/27 00:29:40
@@ -57,7 +57,7 @@ static void blkchk(BLOCK*);
  *
  * given:
  *	len	- initial memory length of the block
- *	type	- BLK_TYPE_XXX
+ *	type	- BLK_TYPE_XYZ
  *	chunk	- allocation chunk size
  *
  * returns:

byteswap.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: byteswap.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: byteswap.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/byteswap.h,v $
  *
  * Under source code control:	1995/10/11 04:44:01
@@ -33,7 +33,11 @@
 #define __BYTESWAP_H__
 
 
-#include "longbits.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "longbits.h"
+#else
+# include <calc/longbits.h>
+#endif
 
 
 /*

cal/Makefile

@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.2 $
-# @(#) $Id: Makefile,v 29.2 2000/06/07 14:02:25 chongo Exp $
+# @(#) $Revision: 29.22 $
+# @(#) $Id: Makefile,v 29.22 2006/09/18 00:08:42 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/Makefile,v $
 #
 # Under source code control:	1991/07/21 05:00:54
@@ -36,15 +36,120 @@
 SHELL = /bin/sh
 MAKE_FILE = Makefile
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
-#
-# where to install things
-TOPDIR= /usr/local/lib
-#TOPDIR= /usr/lib
-#TOPDIR= /usr/libdata
+####
 
-LIBDIR= ${TOPDIR}/calc
+# Where the system include (.h) files are kept
+#
+# For DJGPP, select:
+#
+#	INCDIR= /dev/env/DJDIR/include
+#
+# If in doubt, set:
+#
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
+SCRIPTDIR= ${BINDIR}/cscript
+
+# T - top level directory under which calc will be installed
+#
+# The calc install is performed under $T, the calc build is
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
+#
+# If $T is empty, calc is installed under /, which is the same
+# top of tree for which it was built.  If $T is non-empty, then
+# calc is installed under $T, as if one had to chroot under
+# $T for calc to operate.
+#
+# If in doubt, use T=
+#
+T=
 
 # Makefile debug
 #
@@ -57,6 +162,7 @@ Q=@
 # standard tools
 #
 CHMOD= chmod
+CMP= cmp
 
 # The calc files to install
 #
@@ -64,13 +170,14 @@ CALC_FILES= README bigprime.cal deg.cal ellip.cal lucas.cal lucas_chk.cal \
 	lucas_tbl.cal mersenne.cal mod.cal pell.cal pi.cal pix.cal \
 	pollard.cal poly.cal psqrt.cal quat.cal regress.cal solve.cal \
 	sumsq.cal surd.cal unitfrac.cal varargs.cal chrem.cal mfactor.cal \
-	bindings randmprime.cal test1700.cal randrun.cal \
+	bindings randmprime.cal test1700.cal randrun.cal linear.cal \
 	randbitrun.cal bernoulli.cal test2300.cal test2600.cal \
 	test2700.cal test3100.cal test3300.cal test3400.cal prompt.cal \
 	test3500.cal seedrandom.cal test4000.cal test4100.cal test4600.cal \
 	beer.cal hello.cal test5100.cal test5200.cal randombitrun.cal \
-	randomrun.cal xx_print.cal natnumset.cal qtime.cal test8400.cal \
-	test8500.cal
+	randomrun.cal repeat.cal xx_print.cal natnumset.cal qtime.cal \
+	test8400.cal test8500.cal test8600.cal chi.cal intfile.cal screen.cal \
+	dotest.cal set8700.cal set8700.line alg_config.cal sumtimes.cal
 
 # These files are found (but not built) in the distribution
 #
@@ -102,48 +209,99 @@ all: ${CALC_FILES} ${MAKE_FILE} .all
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
-		echo cal/$$i; \
-	done
-
-distdir:
-	${Q}echo cal
-
-calcliblist:
-	${Q}for i in ${CALCLIBLIST} /dev/null; do \
+	${Q} for i in ${DISTLIST} /dev/null; do \
 	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo cal/$$i; \
 	    fi; \
 	done
 
+distdir:
+	${Q} echo cal
+
+calcliblist:
+	${Q} for i in ${CALCLIBLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo cal/$$i; \
+	    fi; \
+	done
+
+##
+#
+# rpm rules
+#
+##
+
+echo_inst_files:
+	${Q} for i in ${CALC_FILES} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CALC_SHAREDIR}/$$i; \
+	    fi; \
+	done
+
+##
+#
+# Utility rules
+#
+##
+
 clean:
 
 clobber:
 	rm -f .all
 
+# install everything
+#
+# NOTE: Keep the uninstall rule in reverse order to the install rule
+#
 install: all
-	-${Q}if [ ! -d ${TOPDIR} ]; then \
-		echo mkdir ${TOPDIR}; \
-		mkdir ${TOPDIR}; \
+	-${Q} if [ ! -d $T${CALC_SHAREDIR} ]; then \
+	    echo mkdir $T${CALC_SHAREDIR}; \
+	    mkdir $T${CALC_SHAREDIR}; \
+	    if [ ! -d "$T${CALC_SHAREDIR}" ]; then \
+		echo mkdir -p "$T${CALC_SHAREDIR}"; \
+		mkdir -p "$T${CALC_SHAREDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
+	    ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${LIBDIR} ]; then \
-		echo mkdir ${LIBDIR}; \
-		mkdir ${LIBDIR}; \
-	else \
-	    true; \
-	fi
-	${Q}for i in ${CALC_FILES}; do \
-		echo rm -f ${LIBDIR}/$$i; \
-		rm -f ${LIBDIR}/$$i; \
-		echo cp $$i ${LIBDIR}; \
-		cp $$i ${LIBDIR}; \
-		echo ${CHMOD} 0444 ${LIBDIR}/$$i; \
-		${CHMOD} 0444 ${LIBDIR}/$$i; \
+	${Q} for i in ${CALC_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s $$i $T${CALC_SHAREDIR}/$$i; then \
+		true; \
+	    else \
+		rm -f $T${CALC_SHAREDIR}/$$i.new; \
+		cp -f $$i $T${CALC_SHAREDIR}/$$i.new; \
+		${CHMOD} 0444 $T${CALC_SHAREDIR}/$$i.new; \
+		mv -f $T${CALC_SHAREDIR}/$$i.new $T${CALC_SHAREDIR}/$$i; \
+		echo "installed $T${CALC_SHAREDIR}/$$i"; \
+	    fi; \
+	done
+
+# Try to remove everything that was installed
+#
+# NOTE: Keep the uninstall rule in reverse order to the install rule
+#
+uninstall:
+	-${Q} for i in ${CALC_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if [ -f "$T${CALC_SHAREDIR}/$$i" ]; then \
+	    	rm -f "$T${CALC_SHAREDIR}/$$i"; \
+		if [ -f "$T${CALC_SHAREDIR}/$$i" ]; then \
+		   echo "cannot uninstall $T${CALC_SHAREDIR}/$$i"; \
+		else \
+		   echo "uninstalled $T${CALC_SHAREDIR}/$$i"; \
+		fi; \
+	    fi; \
+	done
+	-${Q} for i in ${CALC_SHAREDIR}; do \
+	    if [ -d "$T$$i" ]; then \
+		rmdir "$T$$i" 2>/dev/null; \
+		echo "cleaned up $T$$i"; \
+	    fi; \
 	done
-	${Q}echo remove files that are obsolete
-	-rm -f nextprime.cal nextprim.cal
-	-rm -f test1000.cal test2000.cal ${LIBDIR}/test2000.cal
-	-rm -f ${LIBDIR}/nextprime.cal ${LIBDIR}/nextprim.cal
-	-rm -f ${LIBDIR}/test1000.cal ${LIBDIR}/cryrand.cal

cal/README

@@ -1,7 +1,7 @@
 Calc standard resource files
 ----------------------------
 
-To load a reosurce file, try:
+To load a resource file, try:
 
     read filename
 
@@ -12,7 +12,7 @@ Normally a resource file will simply define some functions.  By default,
 most resource files will print out a short message when they are read.
 For example:
 
-    > read lucas
+    ; read lucas
     lucas(h,n) defined
     gen_u0(h,n,v1) defined
     gen_v1(h,n) defined
@@ -22,9 +22,9 @@ will cause calc to load and execute the 'lucas.cal' resource file.
 Executing the resource file will cause several functions to be defined.
 Executing the lucas function:
 
-    > lucas(149,60)
+    ; lucas(149,60)
 	    1
-    > lucas(146,61)
+    ; lucas(146,61)
 	    0
 
 shows that 149*2^60-1 is prime whereas 146*2^61-1 is not.
@@ -59,12 +59,12 @@ files have already been read, the read -once will act as a noop.
 
 The "resource_debug" parameter is intended for controlling the possible
 display of special information relating to functions, objects, and
-other structures created by instructions in calc resoure files.
+other structures created by instructions in calc resource files.
 Zero value of config("resource_debug") means that no such information
 is displayed.  For other values, the non-zero bits which currently
 have meanings are as follows:
 
-    n	    Meaning of bit n of config("resource_debug")
+    n		Meaning of bit n of config("resource_debug")
 
     0	When a function is defined, redefined or undefined at
 	interactive level, a message saying what has been done
@@ -74,6 +74,12 @@ have meanings are as follows:
 	the reading of a file, a message saying what has been done
 	is displayed.
 
+    2	Show func will display more information about a functions
+	arguments as well as more argument summary information.
+
+    3	During execution, allow calc standard resource files
+	to output additional debugging information.
+
 The value for config("resource_debug") in both oldstd and newstd is 3,
 but if calc is invoked with the -d flag, its initial value is zero.
 Thus, if calc is started without the -d flag, until config("resource_debug")
@@ -97,18 +103,82 @@ either of the bottom 2 bits set:
 		print "funcB(size, mass, ...) defined";
 	}
 
+If your the resource file needs to output special debugging information,
+we recommend that you check for bit 3 of the config("resource_debug")
+before printing the debug statement:
+
+	if (config("resource_debug") & 8) {
+		print "DEBUG: This a sample debug statement";
+	}
+
 =-=
 
 The following is a brief description of some of the calc resource files
 that are shipped with calc.  See above for example of how to read in
 and execute these files.
 
+alg_config.cal
+
+    global test_time
+    mul_loop(repeat,x) defined
+    mul_ratio(len) defined
+    best_mul2() defined
+    sq_loop(repeat,x) defined
+    sq_ratio(len) defined
+    best_sq2() defined
+    pow_loop(repeat,x,ex) defined
+    pow_ratio(len) defined
+    best_pow2() defined
+
+    These functions search for an optimal value of config("mul2"),
+    config("sq2"), and config("pow2").  The calc default values of these
+    configuration values were set by running this resource file on a
+    1.8GHz AMD 32-bit CPU of ~3406 BogoMIPS.
+
+    The best_mul2() function returns the optimal value of config("mul2").
+    The best_sq2() function returns the optimal value of config("sq2").
+    The best_pow2() function returns the optimal value of config("pow2").
+    The other functions are just support functions.
+
+    By design, best_mul2(), best_sq2(), and best_pow2() take a few
+    minutes to run.  These functions increase the number of times a
+    given computational loop is executed until a minimum amount of CPU
+    time is consumed.  To watch these functions progress, one can set
+    the config("user_debug") value.
+
+    Here is a suggested way to use this resource file:
+
+	; read alg_config
+	; config("user_debug",2),;
+	; best_mul2(); best_sq2(); best_pow2();
+	; best_mul2(); best_sq2(); best_pow2();
+	; best_mul2(); best_sq2(); best_pow2();
+
+    NOTE: It is perfectly normal for the optimal value returned to differ
+    slightly from run to run.  Slight variations due to inaccuracy in
+    CPU timings will cause the best value returned to differ slightly
+    from run to run.
+
+    One can use a calc startup file to change the initial values of
+    config("mul2"), config("sq2"), and config("pow2").  For example one
+    can place into ~/.calcrc these lines:
+
+	config("mul2", 1780),;
+	config("sq2", 3388),;
+	config("pow2", 176),;
+
+    to automatically and silently change these config values.
+    See help/config and CALCRC in help/environment for more information.
+
+
 beer.cal
 
     Calc's contribution to the 99 Bottles of Beer web page:
 
 	http://www.ionet.net/~timtroyr/funhouse/beer.html#calc
 
+     NOTE: This resource produces a lot of output.  :-)
+
 
 bernoulli.cal
 
@@ -116,6 +186,10 @@ bernoulli.cal
 
     Calculate the nth Bernoulli number.
 
+    NOTE: There is now a bernoulli() builtin function.  This file is
+    	  left here for backward compatibility and now simply returns
+	  the builtin function.
+
 
 bigprime.cal
 
@@ -124,6 +198,24 @@ bigprime.cal
     A prime test, base a, on p*2^x+1 for even x>m.
 
 
+chi.cal
+
+    Z(x[, eps])
+    P(x[, eps])
+    chi_prob(chi_sq, v[, eps])
+
+    Computes the Probability, given the Null Hypothesis, that a given
+    Chi squared values >= chi_sq with v degrees of freedom.
+
+    The chi_prob() function does not work well with odd degrees of freedom.
+    It is reasonable with even degrees of freedom, although one must give
+    a sufficiently small error term as the degrees gets large (>100).
+
+    The Z(x) and P(x) are internal statistical functions.
+
+    eps is an optional epsilon() like error term.
+
+
 chrem.cal
 
     chrem(r1,m1 [,r2,m2, ...])
@@ -144,6 +236,38 @@ deg.cal
     Calculate in degrees, minutes, and seconds.
 
 
+dotest.cal
+
+    dotest(dotest_file [,dotest_code [,dotest_maxcond]])
+
+    dotest_file
+
+	Search along CALCPATH for dotest_file, which contains lines that
+	should evaluate to 1.  Comment lines and empty lines are ignored.
+	Comment lines should use ## instead of the multi like /* ... */
+	because lines are evaluated one line at a time.
+
+    dotest_code
+
+	Assign the code number that is to be printed at the start of
+	each non-error line and after **** in each error line.
+	The default code number is 999.
+
+    dotest_maxcond
+
+	The maximum number of error conditions that may be detected.
+	An error condition is not a sign of a problem, in some cases
+	a line deliberately forces an error condition.	A value of -1,
+	the default, implies a maximum of 2147483647.
+
+    Global variables and functions must be declared ahead of time because
+    the dotest scope of evaluation is a line at a time.  For example:
+
+	read dotest.cal
+	read set8700.cal
+	dotest("set8700.line");
+
+
 ellip.cal
 
     efactor(iN, ia, B, force)
@@ -158,6 +282,43 @@ hello.cal
 	http://www.latech.edu/~acm/HelloWorld.shtml
 	http://www.latech.edu/~acm/helloworld/calc.html
 
+     NOTE: This resource produces a lot of output.  :-)
+
+
+intfile.cal
+
+    file2be(filename)
+
+	Read filename and return an integer that is built from the
+	octets in that file in Big Endian order.  The first octets
+	of the file become the most significant bits of the integer.
+
+    file2le(filename)
+
+	Read filename and return an integer that is built from the
+	octets in that file in Little Endian order.  The first octets
+	of the file become the most significant bits of the integer.
+
+    be2file(v, filename)
+
+	Write the absolute value of v into filename in Big Endian order.
+	The v argument must be on integer.  The most significant bits
+	of the integer become the first octets of the file.
+
+    le2file(v, filename)
+
+	Write the absolute value of v into filename in Little Endian order.
+	The v argument must be on integer.  The least significant bits
+	of the integer become the last octets of the file.
+
+
+linear.cal
+
+    linear(x0, y0, x1, y1, x)
+
+    Returns the value y such that (x,y) in on the line (x0,y0), (x1,y1).
+    Requires x0 != y0.
+
 
 lucas.cal
 
@@ -274,7 +435,7 @@ pell.cal
     pell(D)
 
     Solve Pell's equation; Returns the solution X to: X^2 - D * Y^2 = 1.
-    Type the solution to pells equation for a particular D.
+    Type the solution to Pell's equation for a particular D.
 
 
 pi.cal
@@ -288,7 +449,7 @@ pi.cal
     The piforever() prints digits of pi, nicely formatted, for as long
     as your free memory space and system up time allows.
 
-    The piforever() funcion (written by Klaus Alexander Seistrup
+    The piforever() function (written by Klaus Alexander Seistrup
     <klaus@seistrup.dk>) was inspired by an algorithm conceived by
     Lambert Meertens.  See also the ABC Programmer's Handbook, by Geurts,
     Meertens & Pemberton, published by Prentice-Hall (UK) Ltd., 1990.
@@ -356,7 +517,7 @@ quat.cal
     quat_shift(a, b)
 
     Calculate using quaternions of the form: a + bi + cj + dk.	In these
-    functions, quaternians are manipulated in the form: s + v, where
+    functions, quaternions are manipulated in the form: s + v, where
     s is a scalar and v is a vector of size 3.
 
 
@@ -386,7 +547,7 @@ randombitrun.cal
     randombitrun([run_cnt])
 
     Using randombit(1) to generate a sequence of random bits, determine if
-    the number and kength of identical bits runs match what is expected.
+    the number and length of identical bits runs match what is expected.
     By default, run_cnt is to test the next 65536 random values.
 
     This tests the Blum-Blum-Shub generator.
@@ -417,6 +578,16 @@ randrun.cal
 
     This tests the a55 generator.
 
+repeat.cal
+
+    repeat(digit_set, repeat_count)
+
+    Return the value of the digit_set repeated repeat_count times.
+    Both digit_set and repeat_count must be integers > 0.
+
+    For example repeat(423,5) returns the value 423423423423423,
+    which is the digit_set 423 repeated 5 times.
+
 
 regress.cal
 
@@ -424,6 +595,58 @@ regress.cal
     Errors are reported with '****' messages, or worse. :-)
 
 
+screen.cal
+
+    up
+    CUU	/* same as up */
+    down = CUD
+    CUD	/* same as down */
+    forward
+    CUF	/* same as forward */
+    back = CUB
+    CUB	/* same as back */
+    save
+    SCP	/* same as save */
+    restore
+    RCP	/* same as restore */
+    cls
+    home
+    eraseline
+    off
+    bold
+    faint
+    italic
+    blink
+    rapidblink
+    reverse
+    concealed
+    /* Lowercase indicates foreground, uppercase background */
+    black
+    red
+    green
+    yellow
+    blue
+    magenta
+    cyan
+    white
+    Black
+    Red
+    Green
+    Yellow
+    Blue
+    Magenta
+    Cyan
+    White
+
+    Define ANSI control sequences providing (i.e., cursor movement, changing
+    foreground or background color, etc.) for VT100 terminals and terminal
+    window emulators (i.e., xterm, Apple OS/X Terminal, etc.) that support them.
+
+    For example:
+
+	read screen
+	print green:"This is green. ":red:"This is red.":black
+
 seedrandom.cal
 
     seedrandom(seed1, seed2, bitsize [,trials])
@@ -442,6 +665,24 @@ seedrandom.cal
     Blum primes for the modulus.
 
 
+set8700.cal
+
+    set8700_getA1() defined
+    set8700_getA2() defined
+    set8700_getvar() defined
+    set8700_f(set8700_x) defined
+    set8700_g(set8700_x) defined
+
+    Declare globals and define functions needed by dotest() (see
+    dotest.cal) to evaluate set8700.line a line at a time.
+
+
+set8700.line
+
+    A line-by-line evaluation file for dotest() (see dotest.cal).
+    The set8700.cal file (and dotest.cal) should be read first.
+
+
 solve.cal
 
     solve(low, high, epsilon)
@@ -460,6 +701,27 @@ sumsq.cal
     4N+1, and always impossible for primes of the form 4N-1.
 
 
+sumtimes.cal
+
+    timematsum(N)
+    timelistsum(N)
+    timematsort(N)
+    timelistsort(N)
+    timematreverse(N)
+    timelistreverse(N)
+    timematssq(N)
+    timelistssq(N)
+    timehmean(N,M)
+    doalltimes(N)
+
+    Give the runtimes for various ways of evaluating sums, sums of
+    squares, etc, for large lists and matrices.  N is the size of
+    the list or matrix to use.  The doalltimes() function will run
+    all fo the sumtimes tests.  For example:
+
+    	doalltimes(1e6);
+
+
 surd.cal
 
     surd(a, b)
@@ -489,7 +751,7 @@ test1700.cal
 
     value
 
-    This resoure files is used by regress.cal to test the read and use keywords.
+    This resource files is used by regress.cal to test the read and use keywords.
 
 
 test2600.cal
@@ -514,7 +776,7 @@ test2600.cal
     checkresult(x, y, z, a)
     test2600(verbose, tnum)
 
-    This resoure files is used by regress.cal to test some of builtin functions
+    This resource files is used by regress.cal to test some of builtin functions
     in terms of accuracy and roundoff.
 
 
@@ -537,7 +799,7 @@ test2700.cal
     iscomsq(x)
     test2700(verbose, tnum)
 
-    This resoure files is used by regress.cal to test sqrt() for real and
+    This resource files is used by regress.cal to test sqrt() for real and
     complex values.
 
 
@@ -625,7 +887,7 @@ test4000.cal
     test4000(verbose, tnum) defined
 
     This resource file is used by regress.cal to test ptest, nextcand and
-    prevcand buildins.
+    prevcand builtins.
 
 test4100.cal
 
@@ -677,6 +939,35 @@ test5200.cal
     This resource file is used by regress.cal to test the fix of a
     global/static bug.
 
+test8400.cal
+
+    test8400() defined
+
+    This resource file is used by regress.cal to check for quit-based
+    memory leaks.
+
+test8500.cal
+
+    global err_8500
+    global L_8500
+    global ver_8500
+    global old_seed_8500
+    global cfg_8500
+    onetest_8500(a,b,rnd) defined
+    divmod_8500(N, M1, M2, testnum) defined
+
+    This resource file is used by regress.cal to the // and % operators.
+
+test8600.cal
+
+    global min_8600
+    global max_8600
+    global hash_8600
+    global hmean_8600
+
+    This resource file is used by regress.cal to test a change of
+    allowing up to 1024 args to be passed to a builtin function.
+
 unitfrac.cal
 
     unitfrac(x)
@@ -705,7 +996,7 @@ xx_print.cal
 
     Demo for the xx_print object routines.
 
-## Copyright (C) 1999  David I. Bell and Landon Curt Noll
+## Copyright (C) 2000  David I. Bell and Landon Curt Noll
 ##
 ## Primary author: Landon Curt Noll
 ##
@@ -723,8 +1014,8 @@ xx_print.cal
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: README,v 29.2 2000/06/07 14:02:25 chongo Exp $
+## @(#) $Revision: 29.15 $
+## @(#) $Id: README,v 29.15 2006/06/23 00:34:55 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/README,v $
 ##
 ## Under source code control:	1990/02/15 01:50:32

cal/bernoulli.cal

@@ -1,7 +1,7 @@
 /*
  * bernoulli - clculate the Nth Bernoulli number B(n)
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 2000  David I. Bell and Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: bernoulli.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: bernoulli.cal,v 29.3 2000/12/17 12:26:04 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/bernoulli.cal,v $
  *
  * Under source code control:	1991/09/30 11:18:41
@@ -29,12 +29,16 @@
 
 /*
  * Calculate the Nth Bernoulli number B(n).
- * This uses the following symbolic formula to calculate B(n):
+ *
+ * NOTE: This is now a bulitin function.
+ *
+ * The non-buildin code used the following symbolic formula to calculate B(n):
  *
  *	(b+1)^(n+1) - b^(n+1) = 0
  *
  * where b is a dummy value, and each power b^i gets replaced by B(i).
  * For example, for n = 3:
+ *
  *	(b+1)^4 - b^4 = 0
  *	b^4 + 4*b^3 + 6*b^2 + 4*b + 1 - b^4 = 0
  *	4*b^3 + 6*b^2 + 4*b + 1 = 0
@@ -48,11 +52,14 @@
  */
 
 
+/*
 static Bnmax;
 static mat Bn[1001];
+*/
 
 define B(n)
 {
+/*
 	local	nn, np1, i, sum, mulval, divval, combval;
 
 	if (!isint(n) || (n < 0))
@@ -85,4 +92,6 @@ define B(n)
 	}
 	Bnmax = n;
 	return Bn[n];
+*/
+	return bernoulli(n);
 }

cal/chi.cal

@@ -0,0 +1,251 @@
+/*
+ * chi - chi^2 probabilities with degrees of freedom for null hypothesis
+ *
+ * Copyright (C) 2001  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: chi.cal,v 29.2 2001/04/08 10:21:23 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/chi.cal,v $
+ *
+ * Under source code control:	2001/03/27 14:10:11
+ * File existed as early as:	2001
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+/*
+ * Z(x)
+ *
+ * From Handbook of Mathematical Functions
+ *	10th printing, Dec 1972 with corrections
+ *	National Bureau of Standards
+ *
+ * Section 26.2.1, p931.
+ */
+define Z(x, eps_term)
+{
+    local eps;		/* error term */
+
+    /* obtain the error term */
+    if (isnull(eps_term)) {
+    	eps = epsilon();
+    } else {
+	eps = eps_term;
+    }
+
+    /* compute Z(x) value */
+    return exp(-x*x/2, eps) / sqrt(2*pi(eps), eps);
+}
+
+
+/*
+ * P(x[, eps]) asymtotic P(x) expansion for x>0 to an given epsilon error term
+ *
+ * NOTE: If eps is omitted, the stored epsilon value is used.
+ *
+ * From Handbook of Mathematical Functions
+ *	10th printing, Dec 1972 with corrections
+ *	National Bureau of Standards
+ *
+ * 26.2.11, p932:
+ *
+ *	P(x) = 1/2 + Z(x) * sum(n=0; n < infinity){x^(2*n+1)/(1*3*5*...(2*n+1)};
+ *
+ * We continue the fraction until it is less than epsilon error term.
+ *
+ * Also note 26.2.5:
+ *
+ *	P(x) + Q(x) = 1
+ */
+define P(x, eps_term)
+{
+    local eps;		/* error term */
+    local s;		/* sum */
+    local x2;		/* x^2 */
+    local x_term;	/* x^(2*r+1) */
+    local odd_prod;	/* 1*3*5* ... */
+    local odd_term;	/* next odd value to multiply into odd_prod */
+    local term;		/* the recent term added to the sum */
+
+    /* obtain the error term */
+    if (isnull(eps_term)) {
+    	eps = epsilon();
+    } else {
+	eps = eps_term;
+    }
+
+    /* firewall */
+    if (x <= 0) {
+	if (x == 0) {
+	    return 0;	/* hack */
+	} else {
+	    quit "Q(x[,eps]) 1st argument must be >= 0";
+	}
+    }
+    if (eps <= 0) {
+	quit "Q(x[,eps]) 2nd argument must be > 0";
+    }
+
+    /*
+     * aproximate sum(n=0; n < infinity){x^(2*n+1)/(1*3*5*...(2*n+1)}
+     */
+    x2 = x*x;
+    x_term = x;
+    s = x_term;	/* 1st term */
+    odd_term = 1;
+    odd_prod = 1;
+    do {
+
+	/* compute the term */
+	odd_term += 2;
+	odd_prod *= odd_term;
+	x_term *= x2;
+	term = x_term / odd_prod;
+	s += term;
+
+    } while (term >= eps);
+
+    /* apply term and factor */
+    return 0.5 + Z(x,eps)*s;
+}
+
+
+/*
+ * chi_prob(chi_sq, v[, eps]) -  Prob of >= chi^2 with v degrees of freedom
+ *
+ *    Computes the Probability, given the Null Hypothesis, that a given
+ *    Chi squared values >= chi_sq with v degrees of freedom.
+ *
+ *    The chi_prob() function does not work well with odd degrees of freedom.
+ *    It is reasonable with even degrees of freedom, although one must give
+ *    a sifficently small error term as the degress gets large (>100).
+ *
+ * NOTE: This function does not work well with odd degrees of freedom.
+ *	 Can somebody help / find a bug / provide a better method of
+ *	 this odd degrees of freedom case?
+ *
+ * NOTE: This function works well with even degrees of freedom.  However
+ *	 when the even degrees gets large (say, as you approach 100), you
+ *	 need to increase your error term.
+ *
+ * From Handbook of Mathematical Functions
+ *	10th printing, Dec 1972 with corrections
+ *	National Bureau of Standards
+ *
+ * Section 26.4.4, p941:
+ *
+ *   For odd v:
+ *
+ *	Q(chi_sq, v) = 2*Q(chi) + 2*Z(chi) * (
+ *		     sum(r=1, r<=(r-1)/2) {(chi_sq^r/chi) / (1*3*5*...(2*r-1)});
+ *
+ *	chi = sqrt(chi_sq)
+ *
+ *	NOTE: Q(x) = 1-P(x)
+ *
+ * Section 26.4.5, p941.
+ *
+ *   For even v:
+ *
+ *	Q(chi_sq, v) = sqrt(2*pi()) * Z(chi) * ( 1 +
+ *		       sum(r=1, r=((v-2)/2)) { chi_sq^r / (2*4*...*(2r)) } );
+ *
+ *	chi = sqrt(chi_sq)
+ *
+ * Observe that:
+ *
+ *	Z(x) = exp(-x*x/2) / sqrt(2*pi());	(Section 26.2.1, p931)
+ *
+ * and thus:
+ *
+ *	sqrt(2*pi()) * Z(chi) =
+ *	sqrt(2*pi()) * Z(sqrt(chi_sq)) =
+ *	sqrt(2*pi()) * exp(-sqrt(chi_sq)*sqrt(chi_sq)/2) / sqrt(2*pi()) =
+ *	exp(-sqrt(chi_sq)*sqrt(chi_sq)/2) =
+ *	exp(-sqrt(-chi_sq/2)
+ *
+ * So:
+ *
+ *	Q(chi_sq, v) = exp(-sqrt(-chi_sq/2) * ( 1 + sum(....){...} );
+ */
+define chi_prob(chi_sq, v, eps_term)
+{
+    local eps;		/* error term */
+    local r;		/* index in finite sum */
+    local r_lim;	/* limit value for r */
+    local s;		/* sum */
+    local d;		/* demoninator (2*4*6*... or 1*3*5...) */
+    local chi_term;	/* chi_sq^r */
+    local ret;		/* return value */
+
+    /* obtain the error term */
+    if (isnull(eps_term)) {
+	eps = epsilon();
+    } else {
+	eps = eps_term;
+    }
+
+    /*
+     * odd degrees of freedom
+     */
+    if (isodd(v)) {
+
+	local chi;		/* sqrt(chi_sq) */
+
+	/* setup for sum */
+	s = 1;
+	d = 1;
+	chi = sqrt(abs(chi_sq), eps);
+	chi_term = chi;
+	r_lim = (v-1)/2;
+
+	/* compute sum(r=1, r=((v-1)/2)) {(chi_sq^r/chi) / (1*3*5...*(2r-1))} */
+	for (r=2; r <= r_lim; ++r) {
+	    chi_term *= chi_sq;
+	    d *= (2*r)-1;
+	    s += chi_term/d;
+	}
+
+	/* apply term and factor, Q(x) = 1-P(x) */
+	ret = 2*(1-P(chi)) + 2*Z(chi)*s;
+
+    /*
+     * even degrees of freedom
+     */
+    } else {
+
+	/* setup for sum */
+	s =1;
+	d = 1;
+	chi_term = 1;
+	r_lim = (v-2)/2;
+
+	/* compute sum(r=1, r=((v-2)/2)) { chi_sq^r / (2*4*...*(2r)) } */
+	for (r=1; r <= r_lim; ++r) {
+	    chi_term *= chi_sq;
+	    d *= r*2;
+	    s += chi_term/d;
+	}
+
+	/* apply factor - see observation in the main comment above */
+	ret = exp(-chi_sq/2, eps) * s;
+    }
+
+    return ret;
+}

cal/deg.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: deg.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: deg.cal,v 29.4 2003/01/26 19:32:41 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/deg.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:33
@@ -42,7 +42,7 @@ define dms(deg, min, sec)
 	ans.deg = deg;
 	ans.min = min;
 	ans.sec = sec;
-	fixdms(&ans);
+	fixdms(ans);
 	return ans;
 }
 
@@ -66,7 +66,7 @@ define dms_add(a, b)
 		ans.sec += b.sec;
 	} else
 		ans.deg += b;
-	fixdms(&ans);
+	fixdms(ans);
 	return ans;
 }
 
@@ -75,9 +75,9 @@ define dms_neg(a)
 {
 	local obj dms	ans;
 
-	ans.deg = -ans.deg;
-	ans.min = -ans.min;
-	ans.sec = -ans.sec;
+	ans.deg = -a.deg;
+	ans.min = -a.min;
+	ans.sec = -a.sec;
 	return ans;
 }
 
@@ -103,7 +103,7 @@ define dms_mul(a, b)
 		ans.min = b.min * a;
 		ans.sec = b.sec * a;
 	}
-	fixdms(&ans);
+	fixdms(ans);
 	return ans;
 }
 

cal/dotest.cal

@@ -0,0 +1,193 @@
+/*
+ * dotest - test truth statements found in line tests of dotest_testline file
+ *
+ * This file was created by Ernest Bowen <ebowen at une dot edu dot au>
+ * and modified by Landon Curt Noll.
+ *
+ * This dotest_code has been placed in the public domain.  Please do not
+ * copyright this dotest_code.
+ *
+ * ERNEST BOWEN AND LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO
+ * THIS	 SOFTWARE,  INCLUDING  ALL IMPLIED WARRANTIES OF MER-
+ * CHANTABILITY AND FITNESS.  IN NO EVENT SHALL	 LANDON	 CURT
+ * NOLL	 BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM  LOSS  OF
+ * USE,	 DATA  OR  PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR  IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: dotest.cal,v 29.2 2006/05/21 00:55:27 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/dotest.cal,v $
+ *
+ * This file is not covered under version 2.1 of the GNU LGPL.
+ *
+ * Under source dotest_code control:	2006/03/08 05:54:09
+ * File existed as early as:	2006
+ */
+
+
+/*
+ * dotest - perform tests from dotest_testline file
+ *
+ * given:
+ *	dotest_file	filename containing single test lines
+ *	dotest_code	regress.cal test number to use (def: 0)
+ *	dotest_maxcond	max error conditions allowed (def: <0 ==> 2^31-1)
+ *
+ * returns:
+ *	number of line test failures
+ *
+ * NOTE: All variables used by the dotest() function start with "dotest_".
+ *	 The dotest_file and dotest_read should not use any variable
+ *	 that starts with "dotest_".
+ */
+define dotest(dotest_file, dotest_code = 0, dotest_maxcond = -1)
+{
+    local dotest_f_file;	/* open file containing test lines */
+    local dotest_testline;	/* test line */
+    local dotest_testeval;	/* eval value from dotest_testline test line */
+    local dotest_tmperrcnt;	/* temp error count after line test */
+    local dotest_errcnt;	/* total number of errors */
+    local dotest_failcnt;	/* number of line tests failed */
+    local dotest_testnum;	/* number of test lines evaluated */
+    local dotest_linenum;	/* test line number */
+    local dotest_old_errmax;	/* value of errmax() prior to calling */
+    local dotest_old_errcount;	/* value of errcount() prior to calling */
+
+    /*
+     * preserve calling stats
+     */
+    dotest_old_errmax = errmax();
+    dotest_old_errcount = errcount(0);
+
+    /*
+     * initialize test accounting
+     */
+    dotest_errcnt = errcount();
+    dotest_failcnt = 0;
+    dotest_testnum = 0;
+    dotest_linenum = 0;
+
+    /*
+     * setup error accounting for dotest
+     */
+    if (dotest_maxcond >= 0 && dotest_maxcond < 2147483647) {
+	    errmax(dotest_maxcond + dotest_old_errcount + 1),;
+    } else {
+	    errmax(2147483647),;
+    }
+
+    /*
+     * open the test line file
+     */
+    printf("%d-: opening line file: %d", dotest_code, dotest_file);
+    dotest_f_file = fpathopen(dotest_file, "r");
+    if (!isfile(dotest_f_file)) {
+	printf("**** Unable to file or open file \"%s\"\n",
+		dotest_file);
+	quit;
+    }
+    printf('%d: testing "%s"\n', dotest_code, dotest_file);
+
+    /*
+     * perform dotest_testline test on each line of the file
+     */
+    for (;;) {
+
+	/* get the next test line */
+	dotest_testline = fgets(dotest_f_file);
+	++dotest_linenum;
+	if (iserror(dotest_testline)) {
+	    quit "**** Error while reading file";
+	} else if (isnull(dotest_testline)) {
+	    /* EOF - end of test file */
+	    break;
+	}
+
+	/* skip empty lines */
+	if (dotest_testline == "\n") {
+	    continue;
+	}
+
+	/* evaluate the test line */
+	dotest_testeval = eval(dotest_testline);
+
+	/* ignore white space or comment lines */
+	if (isnull(dotest_testeval)) {
+	    continue;
+	}
+
+	/* look for test line parse errors */
+	if (iserror(dotest_testeval)) {
+	    printf("**** evaluation error: ");
+	    ++dotest_failcnt;
+
+	/* look for test line dotest_failcnt */
+	} else if (dotest_testeval != 1) {
+	    printf("**** did not return 1: ");
+	    ++dotest_failcnt;
+	}
+
+	/* show the test line we just performed */
+	printf("%d-%d: %s", dotest_code, dotest_linenum, dotest_testline);
+
+	/* error accounting */
+	dotest_tmperrcnt = errcount() - dotest_errcnt;
+	if (dotest_tmperrcnt > 0) {
+
+	    /* report any other errors */
+	    if (dotest_tmperrcnt > 1) {
+		printf("%d-%d: NOTE: %d error conditions(s): %s\n",
+		    dotest_code, dotest_linenum, dotest_tmperrcnt);
+	    }
+
+	    /* report the calc error string */
+	    printf("%d-%d: NOTE: last error string: %s\n",
+	        dotest_code, dotest_linenum, strerror());
+
+	    /* new error count level */
+	    dotest_errcnt = errcount();
+	    if (dotest_maxcond >= 0 &&
+	        dotest_old_errcount-dotest_errcnt > dotest_maxcond) {
+		printf("%d-%d: total error conditions: %d > %d\n",
+		       dotest_code, dotest_linenum,
+		       dotest_maxcond, dotest_old_errcount-dotest_errcnt);
+	    }
+	}
+    }
+
+    /*
+     * test the close of the line file
+     */
+    printf("%d-: detected %d error condition(s), many of which may be OK\n",
+    	   dotest_code, dotest_old_errcount-dotest_errcnt);
+    printf("%d-: closing line file: %d\n", dotest_code, dotest_file);
+    fclose(dotest_f_file);
+
+    /*
+     * test line file accounting
+     */
+    if (dotest_failcnt > 0) {
+	printf("**** %d-: %d test failure(s) in %d line(s)\n",
+	    dotest_code, dotest_failcnt, dotest_linenum);
+    } else {
+	printf("%d-: no failure(s) in %d line(s)\n",
+	    dotest_code, dotest_linenum);
+    }
+
+    /*
+     * preppare to return to the caller environment
+     *
+     * We increase the caller's error count by the number
+     * of line tests that failed, not the number of internal
+     * errors that were noted.
+     */
+    errmax(dotest_old_errmax),;
+    errcount(dotest_old_errcount + dotest_failcnt),;
+
+    /*
+     * All Done!!! -- Jessica Noll, Age 2
+     */
+    return dotest_failcnt;
+}

cal/ellip.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: ellip.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: ellip.cal,v 29.4 2006/06/20 09:29:16 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/ellip.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:33
@@ -28,16 +28,17 @@
  */
 
 /*
- * Attempt to factor numbers using elliptic functions.
- *	y^2 = x^3 + a*x + b   (mod N).
+ * Attempt to factor numbers using elliptic functions:
  *
- * Many points (x,y) (mod N) are found that solve the above equation,
+ *	y^2 = x^3 + a*x + b   (mod ellip_N).
+ *
+ * Many points (x,y) (mod ellip_N) are found that solve the above equation,
  * starting from a trivial solution and 'multiplying' that point together
  * to generate high powers of the point, looking for such a point whose
- * order contains a common factor with N.  The order of the group of points
- * varies almost randomly within a certain interval for each choice of a
- * and b, and thus each choice provides an independent opportunity to
- * factor N.  To generate a trivial solution, a is chosen and then b is
+ * order contains a common factor with ellip_N.  The order of the group of
+ * points varies almost randomly within a certain interval for each choice of
+ * a and b, and thus each choice provides an independent opportunity to
+ * factor ellip_N.  To generate a trivial solution, a is chosen and then b is
  * selected so that (1,1) is a solution.  The multiplication is done using
  * the basic fact that the equation is a cubic, and so if a line hits the
  * curve in two rational points, then the third intersection point must
@@ -45,9 +46,9 @@
  * the number of rational solutions can be made very large.  When modular
  * arithmetic is used, solving for the third point requires the taking of a
  * modular inverse (instead of division), and if this fails, then the GCD
- * of the failing value and N provides a factor of N.  This description is
- * only an approximation, read "A Course in Number Theory and Cryptography"
- * by Neal Koblitz for a good explanation.
+ * of the failing value and ellip_N provides a factor of ellip_N.
+ * This description is only an approximation, read "A Course in Number
+ * Theory and Cryptography" by Neal Koblitz for a good explanation.
  *
  * efactor(iN, ia, B, force)
  *	iN is the number to be factored.
@@ -81,15 +82,15 @@
  *
  * If a factor is found, it is returned and is also saved in the global
  * variable f.	The number being factored is also saved in the global
- * variable N.
+ * variable ellip_N.
  */
 
 
 obj point {x, y};
-global	N;		/* number to factor */
-global	a;		/* first coefficient */
-global	b;		/* second coefficient */
-global	f;		/* found factor */
+global	ellip_N;		/* number to factor */
+global	ellip_a;		/* first coefficient */
+global	ellip_b;		/* second coefficient */
+global	ellip_f;		/* found factor */
 
 
 define efactor(iN, ia, B, force)
@@ -103,28 +104,28 @@ define efactor(iN, ia, B, force)
 	if (isnull(ia))
 		ia = 1;
 	obj point x;
-	a = ia;
-	b = -ia;
-	N = iN;
-	C = isqrt(N);
+	ellip_a = ia;
+	ellip_b = -ia;
+	ellip_N = iN;
+	C = isqrt(ellip_N);
 	C = 2 * C + 2 * isqrt(C) + 1;
-	f = 0;
-	while (f == 0) {
-		print "A =", a;
+	ellip_f = 0;
+	while (ellip_f == 0) {
+		print "A =", ellip_a;
 		x.x = 1;
 		x.y = 1;
 		print 2, x;
 		x = x ^ (2 ^ (highbit(C) + 1));
-		for (p = 3; ((p < B) && (f == 0)); p += 2) {
+		for (p = 3; ((p < B) && (ellip_f == 0)); p += 2) {
 			if (!ptest(p, 1))
 				continue;
 			print p, x;
 			x = x ^ (p ^ ((highbit(C) // highbit(p)) + 1));
 		}
-		a++;
-		b--;
+		ellip_a++;
+		ellip_b--;
 	}
-	return f;
+	return ellip_f;
 }
 
 
@@ -141,18 +142,18 @@ define point_mul(p1, p2)
 	if (p2 == 1)
 		return p1;
 	if (p1 == p2)
-		return point_square(&p1);
+		return point_square(`p1);
 	obj point r;
-	m = (minv(p2.x - p1.x, N) * (p2.y - p1.y)) % N;
+	m = (minv(p2.x - p1.x, ellip_N) * (p2.y - p1.y)) % ellip_N;
 	if (m == 0) {
-		if (f == 0)
-			f = gcd(p2.x - p1.x, N);
+		if (ellip_f == 0)
+			ellip_f = gcd(p2.x - p1.x, ellip_N);
 		r.x = 1;
 		r.y = 1;
 		return r;
 	}
-	r.x = (m^2 - p1.x - p2.x) % N;
-	r.y = ((m * (p1.x - r.x)) - p1.y) % N;
+	r.x = (m^2 - p1.x - p2.x) % ellip_N;
+	r.y = ((m * (p1.x - r.x)) - p1.y) % ellip_N;
 	return r;
 }
 
@@ -162,16 +163,16 @@ define point_square(p)
 	local	r, m;
 
 	obj point r;
-	m = ((3 * p.x^2 + a) * minv(p.y << 1, N)) % N;
+	m = ((3 * p.x^2 + ellip_a) * minv(p.y << 1, ellip_N)) % ellip_N;
 	if (m == 0) {
-		if (f == 0)
-			f = gcd(p.y << 1, N);
+		if (ellip_f == 0)
+			ellip_f = gcd(p.y << 1, ellip_N);
 		r.x = 1;
 		r.y = 1;
 		return r;
 	}
-	r.x = (m^2 - p.x - p.x) % N;
-	r.y = ((m * (p.x - r.x)) - p.y) % N;
+	r.x = (m^2 - p.x - p.x) % ellip_N;
+	r.y = ((m * (p.x - r.x)) - p.y) % ellip_N;
 	return r;
 }
 
@@ -184,10 +185,10 @@ define point_pow(p, pow)
 	if (isodd(pow))
 		r = p;
 	t = p;
-	for (bit = 2; ((bit <= pow) && (f == 0)); bit <<= 1) {
-		t = point_square(&t);
+	for (bit = 2; ((bit <= pow) && (ellip_f == 0)); bit <<= 1) {
+		t = point_square(`t);
 		if (bit & pow)
-			r = point_mul(&t, &r);
+			r = point_mul(`t, `r);
 	}
 	return r;
 }

cal/intfile.cal

@@ -0,0 +1,222 @@
+/*
+ * intfile - integer to file and file to integer conversion
+ *
+ * Copyright (C) 2001  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: intfile.cal,v 29.5 2001/04/10 22:09:34 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/intfile.cal,v $
+ *
+ * Under source code control:   2001/03/31 08:13:11
+ * File existed as early as:    2001
+ *
+ * chongo <was here> /\oo/\     http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)        http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+/*
+ * NOTE: Because leading HALF values are trimmed from integer, a file
+ *	 that begins with lots of 0 bits (in the case of big endian)
+ *	 or that ends with lots of 0 bits (in the case of little endian)
+ *	 will be changed when the subsequent integer is written back.
+ */
+
+
+/*
+ * file2be - convert a file into an big endian integer
+ *
+ * given:
+ *	filename	filename to read
+ *
+ * returns:
+ *	integer read from its contents on big endian order
+ */
+define file2be(filename)
+{
+    local fd;	/* open file */
+    local ret;	/* integer to return */
+    local c;	/* character read from the file */
+    local i;
+
+    /*
+     * open the file for reading
+     */
+    fd = fopen(filename, "rb");
+    if (!isfile(fd)) quit "file2be: cannot open file for reading";
+
+    /*
+     * read the contents of the file
+     *
+     * The first octets become the most significant bits of the integer.
+     */
+    ret = 0;
+    while (! isnull(c = fgetc(fd))) {
+	ret <<= 8;
+	ret += ord(c);
+    }
+
+    /*
+     * cleanup and return the integer
+     */
+    fclose(fd);
+    return ret;
+}
+
+
+/*
+ * file2le - convert a file into an little endian integer
+ *
+ * given:
+ *	filename	filename to read
+ *
+ * returns:
+ *	integer read from its contents on little endian order
+ */
+define file2le(filename)
+{
+    local fd;	/* open file */
+    local ret;	/* integer to return */
+    local c;	/* character read from the file */
+    local shft;	/* bit shift for the c value */
+    local i;
+
+    /*
+     * open the file for reading
+     */
+    fd = fopen(filename, "rb");
+    if (!isfile(fd)) quit "file2le: cannot open file for reading";
+
+    /*
+     * read the contents of the file into a string
+     *
+     * The first octets become are the least significant bits of the integer.
+     */
+    ret = 0;
+    shft = 0;
+    while (! isnull(c = fgetc(fd))) {
+	ret |= (ord(c) << shft);
+	shft += 8;
+    }
+
+    /*
+     * cleanup and return the integer
+     */
+    fclose(fd);
+    return ret;
+}
+
+
+/*
+ * be2file - convert a big endian integer into a file
+ *
+ * given:
+ *	v		integer to write to the file
+ *	filename	filename to write
+ *
+ * returns:
+ *	The number of octets written to the file.
+ *
+ * NOTE: The absolute value of the integer is written to the file.
+ */
+define be2file(v, filename)
+{
+    local fd;		/* open file */
+    local octlen;	/* length of v in octets */
+    local i;
+
+    /*
+     * firewall
+     */
+    if (!isint(v)) {
+	quit "be2file: 1st arg not an integer";
+    }
+    v = abs(v);
+
+    /*
+     * open the file for writing
+     */
+    fd = fopen(filename, "wb");
+    if (!isfile(fd)) quit "be2file: cannot open file for writing";
+
+    /*
+     * write the octets to the file
+     *
+     * The most significant bits of the integer become the first file octets.
+     */
+    octlen = int((highbit(v)+8) / 8);
+    for (i=octlen-1; i >= 0; --i) {
+    	fputc(fd, char(v >> (i*8)));
+    }
+
+    /*
+     * cleanup
+     */
+    fclose(fd);
+    return octlen;
+}
+
+
+/*
+ * le2file - convert a little endian integer into a file
+ *
+ * given:
+ *	v		integer to write to the file
+ *	filename	filename to write
+ *
+ * returns:
+ *	The number of octets written to the file.
+ *
+ * NOTE: The absolute value of the integer is written to the file.
+ */
+define le2file(v, filename)
+{
+    local fd;	/* open file */
+    local cnt;	/* octets written */
+
+    /*
+     * firewall
+     */
+    if (!isint(v)) {
+	quit "be2file: 1st arg not an integer";
+    }
+    v = abs(v);
+
+    /*
+     * open the file for writing
+     */
+    fd = fopen(filename, "wb");
+    if (!isfile(fd)) quit "le2file: cannot open file for writing";
+
+    /*
+     * Write the octets to the file.
+     *
+     * The least significant bits of the integer become the first file octets.
+     */
+    cnt = 0;
+    while (v > 0) {
+	fputc(fd, char(v));
+	v >>= 8;
+	++cnt;
+    }
+
+    /*
+     * cleanup
+     */
+    fclose(fd);
+    return cnt;
+}

cal/linear.cal

@@ -0,0 +1,26 @@
+/*
+ * linear - perform a simple two point 2D linear interpolation
+ *
+ * given:
+ *	x0, y0		first known point on the line
+ *	x1, y1		second knonw point on the line
+ *	x		a given point to interpolate on
+ *
+ * returns:
+ *	y such that (x,y) is on the line defined by (x0,y0) and (x1,y1)
+ *
+ * NOTE: The line cannot be vertical.  So x0 != y0.
+ */
+define linear(x0, y0, x1, y1, x)
+{
+    /* firewall */
+    if (!isnum(x0) || ! isnum(y0) || !isnum(x1) || ! isnum(y1) || !isnum(x)) {
+	quit "non-numeric argument passed to linear";
+    }
+    if (x0 == x1) {
+	quit "linear given a line with an infinite slope";
+    }
+
+    /* return y = y0 + (delta_Y/delta_X) * (x - x0) */
+    return y0 + (((y1-y0)/(x1-x0)) * (x - x0));
+}

cal/lucas.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: lucas.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: lucas.cal,v 29.6 2002/07/10 09:43:46 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/lucas.cal,v $
  *
  * Under source code control:	1990/05/03 16:49:51
@@ -28,6 +28,16 @@
  * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
+/*
+ * NOTE: This is a standard calc resource file.  For information on calc see:
+ *
+ *	http://www.isthe.com/chongo/tech/comp/calc/index.html
+ *
+ * To obtain your own copy of calc, see:
+ *
+ *	http://www.isthe.com/chongo/tech/comp/calc/calc-download.html
+ */
+
 /*
  * HISTORICAL NOTE:
  *
@@ -52,12 +62,19 @@
  *
  * At the time of discovery, this was the largest known twin prime pair.
  *
+ * See:
+ *
+ *	http://www.isthe.com/chongo/tech/math/prime/amdahl6.html
+ *
+ * for more information on the Amdahl 6 group.
+ *
  * NOTE: Both largest known and largest known twin prime records have been
  *	 broken.  Rather than update this file each time, I'll just
  *	 congratulate the finders and encourage others to try for
  *	 larger finds.	Records were made to be broken afterall!
- *
- * ON GAINING A WORLD RECORD:
+ */
+
+/* ON GAINING A WORLD RECORD:
  *
  * The routines in calc were designed to be portable, and to work on
  * numbers of 'sane' size.  The Amdahl 6 team used a 'ultra-high speed
@@ -73,7 +90,7 @@
  *
  *	test numbers of the form h*2^n-1
  *	fix a value of n and vary the value h
- *	n mod 128 == 0
+ *	n mod 2^x == 0  for some value of x, say > 7 or more
  *	h*2^n-1 is not divisible by any small prime < 2^40
  *	0 < h < 2^39
  *	h*2^n+1 is not divisible by any small prime < 2^40
@@ -1030,7 +1047,7 @@ gen_v1(h, n)
 define
 ldebug(funct, str)
 {
-	if (config("resource_debug") & 3) {
+	if (config("resource_debug") & 8) {
 		print "DEBUG:", funct:":", str;
 	}
 	return;

cal/lucas_chk.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: lucas_chk.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: lucas_chk.cal,v 29.3 2001/03/31 13:31:34 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/lucas_chk.cal,v $
  *
  * Under source code control:	1991/01/11 05:41:43
@@ -336,7 +336,7 @@ lucas_chk(high_n, quiet)
 
 		/* skip primes where h>=2^n */
 		if (highbit(h_p[i]) >= n_p[i]) {
-			if (config("resource_debug") & 3) {
+			if (config("resource_debug") & 8) {
 				print "h>=2^n skip:", h_p[i]:"*2^":n_p[i]:"-1";
 			}
 			continue;

cal/natnumset.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: natnumset.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: natnumset.cal,v 29.3 2006/05/01 19:19:46 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/natnumset.cal,v $
  *
  * Under source code control:	1997/09/07 23:53:51
@@ -471,7 +471,7 @@ define set_plus(a) = set_sum(a);
 define interval(a, b)
 {
 	local i, j, s;
-	static tail = str("\0\1\3\7\17\37\77\177\377");
+	static tail = "\0\1\3\7\17\37\77\177\377";
 
 	if (!isint(a) || !isint(b))
 		quit "Non-integer argument for interval";

cal/pi.cal

@@ -1,7 +1,7 @@
 /*
  * pi - various routines to calculate pi
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 1999-2004  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: pi.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: pi.cal,v 29.5 2004/02/23 14:04:01 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/pi.cal,v $
  *
  * Under source code control:	1991/05/22 21:56:37
@@ -61,7 +61,7 @@ define qpi(epsilon)
 	yn = sqrt2 - 1;
 	an = 6 - 4 * sqrt2;
 	tn = 2;
-	for (count = 0; count < niter; count++) {
+	for (count = 0; count < niter; ++count) {
 		ym = yn;
 		am = an;
 		tn *= 4;
@@ -104,7 +104,7 @@ define piforever()
 		* Next approximation
 		*/
 		p = k * k;
-		q = k + k++;
+		q = k + ++k;
 
 		a2 = a;
 		b2 = b;

cal/prompt.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: prompt.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: prompt.cal,v 29.3 2006/06/20 09:29:16 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/prompt.cal,v $
  *
  * Under source code control:	1995/12/18 04:43:25
@@ -101,7 +101,7 @@ define adder() {
 	}
 }
 
-global x;
+global prompt_x;
 
 define showvalues(str) {
 	local s;
@@ -109,8 +109,8 @@ define showvalues(str) {
 		s = prompt("? ");
 		if (s == "end")
 			break;
-		x = eval(s);
-		if (!isnum(x)) {
+		prompt_x = eval(s);
+		if (!isnum(prompt_x)) {
 			print "Please enter a number";
 			continue;
 		}

cal/qtime.cal

@@ -1,24 +1,46 @@
 /*
  * qtime - Display time as English sentence
  *
+ * Copyright (C) 1999  Klaus Alexander Seistrup and Landon Curt Noll
+ *
+ * Written by: Klaus Alexander Seistrup <kseis@magnetic-ink.dk>
+ * With mods by: Landon Curt Noll <http://www.isthe.com/chongo/>
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: qtime.cal,v 29.4 2000/12/18 10:18:40 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/qtime.cal,v $
+ *
+ * Under source code control:	1999/10/13 04:10:33
+ * File existed as early as:	1999
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+/*
  * usage:
  *	qtime(utc_hr_offset)
  *
  *	utc_hr_offset	Offset from UTC in hours.
  *
- * Written by: Klaus Alexander Seistrup <kseis@magnetic-ink.dk>
- * With minor mods by: Landon Curt Noll <http://www.isthe.com/chongo/>
- *
  * See:
  *	http://www.magnetic-ink.dk/download/qtime.html
  *
  * for examples of qtime() written on other languages.
- *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: qtime.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
- * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/qtime.cal,v $
- *
- * This file is not covered under version 2.1 of the GNU LGPL.
  */
 
 

cal/repeat.cal

@@ -0,0 +1,53 @@
+/*
+ * repeat - return the value of a repeated set of digits
+ *
+ * Copyright (C) 2003  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: repeat.cal,v 29.4 2003/01/26 19:42:03 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/repeat.cal,v $
+ *
+ * Under source code control:	2003/01/05 00:00:01
+ * File existed as early as:	2003
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+/*
+ * repeat - return the value of a repeated set of digits
+ *
+ * usage:
+ *	repeat(digit_set, repeat_count)
+ */
+define repeat(digit_set, repeat_count)
+{
+    local digit_count;	/* digits in the digit_set */
+
+    /* firewall */
+    if (!isint(digit_set) || digit_set <= 0) {
+	quit "digit set must be an integer > 0";
+    }
+    if (!isint(repeat_count) || repeat_count <= 0) {
+	quit "repeat count must be an integer > 0";
+    }
+
+    /* return repeated set of digits */
+    digit_count = digits(digit_set);
+    return digit_set * (10^(digit_count*repeat_count)-1) / (10^digit_count-1);
+}

cal/screen.cal

@@ -0,0 +1,61 @@
+/*
+ * screen - ANSI control sequences
+ *
+ * This file was created by Ernest Bowen <ebowen at une dot edu dot au>.
+ *
+ * This code has been placed in the public domain.  Please do not
+ * copyright this code.
+ *
+ * ERNEST BOWEN DISCLAIMS ALL WARRANTIES WITH  REGARD  TO
+ * THIS	 SOFTWARE,  INCLUDING  ALL IMPLIED WARRANTIES OF MER-
+ * CHANTABILITY AND FITNESS.  IN NO EVENT SHALL	 LANDON	 CURT
+ * NOLL	 BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM  LOSS  OF
+ * USE,	 DATA  OR  PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR  IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: screen.cal,v 29.2 2006/05/01 19:21:18 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/screen.cal,v $
+ *
+ * This file is not covered under version 2.1 of the GNU LGPL.
+ *
+ * Under source code control:	2006/03/08 05:54:09
+ * File existed as early as:	2006
+ */
+
+up = CUU ="\e[A";
+down = CUD = "\e[B}";
+forward = CUF = "\e[C";
+back = CUB = "\e[D";
+save = SCP = "\e[s";
+restore = RCP = "\e[u";
+cls = "\e[2J";
+home = "\e[F";
+eraseline = "\e[K";
+off = "\e[0m";
+bold = "\e[1m";
+faint = "\e[2m";
+italic = "\e[3m";
+blink = "\e[5m";
+rapidblink = "\e[6m";
+reverse = "\e[7m";
+concealed = "\e[8m";
+/* Lowercase indicates foreground, uppercase background" */
+black = "\e[30m";
+red = "\e[31m";
+green = "\e[32m";
+yellow = "\e[33m";
+blue = "\e[34m";
+magenta = "\e[35m";
+cyan = "\e[36m";
+white = "\e[37m";
+Black = "\e[40m";
+Red = "\e[41m";
+Green = "\e[42m";
+Yellow = "\e[43m";
+Blue = "\e[44m";
+Magenta = "\e[45m";
+Cyan = "\e[46m";
+White = "\e[47m";

cal/seedrandom.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: seedrandom.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: seedrandom.cal,v 29.3 2001/03/31 13:31:34 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/seedrandom.cal,v $
  *
  * Under source code control:	1996/01/01 08:21:00
@@ -115,7 +115,7 @@ define seedrandom(seed1, seed2, size, trials)
 			p = 2*fp+1;
 		} while (ptest(p,1,0) == 0);
 	} while(ptest(p, trials) == 0 || ptest(fp, trials) == 0);
-	if (config("resource_debug") & 3) {
+	if (config("resource_debug") & 8) {
 		print "/* 1st Blum prime */ p=", p;
 	}
 
@@ -129,7 +129,7 @@ define seedrandom(seed1, seed2, size, trials)
 			q = 2*fq+1;
 		} while (ptest(q,1,0) == 0);
 	} while(ptest(q, trials) == 0 || ptest(fq, trials) == 0);
-	if (config("resource_debug") & 3) {
+	if (config("resource_debug") & 8) {
 		print "/* 2nd Blum prime */ q=", q;
 	}
 
@@ -139,7 +139,7 @@ define seedrandom(seed1, seed2, size, trials)
 	n = p*q;				/* the Blum modulus */
 	binsize = highbit(n)+1;			/* smallest power of 2 > p*q */
 	r = pmod(rand(1<<ceil(binsize*4/5), 1<<(binsize-2)), 2, n);
-	if (config("resource_debug") & 3) {
+	if (config("resource_debug") & 8) {
 		print "/* seed quadratic residue */ r=", r;
 		print "/* newn", binsize, "bit quadratic residue*/ newn=", n;
 	}

cal/set8700.cal

@@ -0,0 +1,77 @@
+/*
+ * set8700 - environment for dotest line tests for the 8700 set of regress.cal
+ *
+ * Copyright (C) 2006  Ernest Bowen and Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: set8700.cal,v 29.2 2006/08/20 16:16:11 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/set8700.cal,v $
+ *
+ * Under source code control:	2006/05/20 14:10:11
+ * File existed as early as:	2006
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+/*
+ * setup global variables for dotest() to use with set8700.set
+ */
+
+global set8700_A;
+global set8700_B;
+global set8700_M;
+global set8700_M1;
+global set8700_M2;
+global set8700_L;
+global set8700_L1;
+global set8700_L2;
+global set8700_O;
+global set8700_P;
+global set8700_P1;
+global set8700_P2;
+global set8700_Q;
+global set8700_R;
+global set8700_S;
+global set8700_X;
+global set8700_Y;
+global set8700_x;
+global set8700_y;
+
+define set8700_getA1() = set8700_A;
+
+define set8700_getA2() { return set8700_A; }
+
+define set8700_getvar() {local a = 42; protect(a,256); return a;}
+
+define set8700_f(set8700_x) = set8700_x^2;
+
+define set8700_g(set8700_x)
+{
+    if (isodd(set8700_x)) protect(set8700_x, 256);
+    return set8700_x;
+}
+
+obj set8700_point {
+	set8700_x, set8700_y, set8700_z
+}
+
+global mat set8700_c[] = { 1, 2+3i, -5+4i, 5i+6, -7i };
+
+global mat set8700_e[] = { 0, 1, 0, 0, 2, -3/2, 2, -1/2,
+			   -3, 0.5, -1.0, 0.5, 1.0, 0.0, 0.0, 0.0 };

cal/set8700.line

@@ -0,0 +1,429 @@
+##
+## set8700 - dotest line tests for the 8700 set of regress.cal
+##
+## Copyright (C) 2006  Ernest Bowen and Landon Curt Noll
+##
+## Calc is open software; you can redistribute it and/or modify it under
+## the terms of the version 2.1 of the GNU Lesser General Public License
+## as published by the Free Software Foundation.
+##
+## Calc is distributed in the hope that it will be useful, but WITHOUT
+## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+## or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+## Public License for more details.
+##
+## A copy of version 2.1 of the GNU Lesser General Public License is
+## distributed with calc under the filename COPYING-LGPL.  You should have
+## received a copy with calc; if not, write to Free Software Foundation, Inc.
+## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+##
+## @(#) $Revision: 29.4 $
+## @(#) $Id: set8700.line,v 29.4 2006/08/20 16:16:11 chongo Exp $
+## @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/set8700.line,v $
+##
+## Under source code control:	2006/05/20 14:10:11
+## File existed as early as:	2006
+##
+## chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+## Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+
+
+strcpy("", "") == ""
+strcpy("", "xyz") == ""
+strcpy("a", "xyz") == "x"
+strcpy("ab", "xyz") == "xy"
+strcpy("abc", "xyz") == "xyz"
+strcpy("abcd", "xyz") == "xyz\0"  ## Result will print as "xyz"
+strcpy("abcde", "xyz") == "xyz\0e"
+strcpy("abcdef", "xyz") == "xyz\0ef"
+strcpy("abcdef", "x\0z") == "x\0z\0ef" ## Note z is copied
+strcpy("abc", "") == "\0bc"
+
+strncpy("abcdef", "xyz", 0) == "abcdef" ## No characters copied
+strncpy("abcdef", "xyz", 1) == "xbcdef" ## One character copied, no '\0'
+strncpy("abcdef", "xyz", 2) == "xycdef"
+strncpy("abcdef", "xyz", 3) == "xyzdef"
+strncpy("abcdef", "xyz", 4) == "xyz\0ef"
+strncpy("abcdef", "xyz", 5) == "xyz\0\0f" ## Two nulls as in C
+strncpy("abcdef", "xyz", 6) == "xyz\0\0\0"
+strncpy("abcdef", "xyz", 7) == "xyz\0\0\0" ## Size of first string unchanged
+strncpy("a\0cdef", "\0yz", 4) == "\0yz\0ef"
+strncpy("ab", "xyz", 3) == "xy"
+
+strcmp("", "") == 0
+strcmp("", "a") == -1
+strcmp("\n", "\n") == 0
+strcmp("\0", "") == 1		## '\0' treated like other characters
+strcmp("ab", "") == 1
+strcmp("ab", "a") == 1
+strcmp("ab", "ab") == 0
+strcmp("ab", "abc") == -1
+strcmp("abc", "abb") == 1
+strcmp("abc", "abc") == 0
+strcmp("abc", "abd") == -1
+strcmp("abc\0", "abc") == 1
+
+strncmp("abc", "xyz", 0) == 0
+strncmp("abc", "xyz", 1) == -1
+strncmp("abc", "", 1) == 1
+strncmp("abc", "a", 1) == 0
+strncmp("", "", 2) == 0
+strncmp("a", "a", 2) == 0
+strncmp("a", "b", 2) == -1
+strncmp("ab", "ab", 2) == 0
+strncmp("ab", "ac", 2) == -1
+strncmp("\0ac", "\0b", 2) == -1
+strncmp("ab", "abc", 2) == 0
+strncmp("abc", "abd", 2) == 0
+strncmp("a", "a\0", 2) == -1
+strncmp("a", "a", 3) == 0
+strncmp("abc", "abd", 3) == -1
+strncmp("\0\0\n", "\0\0\t", 3) == 1
+
+str("abc") == "abc"
+str("ab\0") == "ab"
+str("a\0c") == "a"
+str("\0bc") == ""
+
+size("") == 0
+size("a") == 1
+size("\0") == 1
+size("a\0") == 2
+size("a\0b") == 3
+
+strlen("\0") == 0
+strlen("a\0") == 1
+strlen("a\0b") == 1
+
+0 * "abc" == ""
+1 * "abc" == "abc"
+2 * "abc" == "abcabc"
+3 * "abc" == "abcabcabc"
+1 * "" == ""
+-1 * "abc" == "cba"
+-2 * "abc" == "cbacba"
+"abc" + "xyz" == "abcxyz"
+"abc" - "xyz" == "abczyx"
+
+
+substr("abcd",0,0) == ""
+substr("abcd",0,1) == "a"
+substr("abcd",0,2) == "ab"
+substr("abcd",1,0) == ""
+substr("abcd",1,1) == "a"
+substr("abcd",1,2) == "ab"
+substr("abcd",2,0) == ""
+substr("abcd",2,1) == "b"
+substr("abcd",2,2) == "bc";
+substr("abcd",2,3) == "bcd";
+substr("abcd",2,4) == "bcd";
+substr("abcd",2,5) == "bcd"; ## substr stops at end of string
+substr("abcd",4,0) == ""
+substr("abcd",4,1) == "d"
+substr("abcd",4,2) == "d"
+substr("abcd",4,3) == "d"
+substr("abcd",5,0) == ""
+substr("abcd",5,1) == ""
+substr("a\0c\0",2,2) == "\0c"  ## '\0' treated like other characters
+substr("a\0c\0",2,3) == "\0c\0"
+
+#"" == 0	## # operator counts number of bits
+#"\0" == 0
+# "a" == 3
+   #	  "ab" == 6	## white space ignored
+# "abc" == 10
+# 27 == 4
+# 0b1010111011 == 7
+
+7 # 9 == 2		## 7 # 9 = abs(7 - 9)
+3/4 # 2/3 == 1/12
+
+a = 5, a #= 2, a == 3
+a #= 4, a == 1
+
+## Binary # operator not defined for strings
+
+protect(set8700_A) == 0
+## Testing with one lvalue
+isnull(protect(set8700_A,65))
+protect(set8700_A) == 65
+isnull(protect(set8700_A, -1))
+protect(set8700_A) == 64
+protect(set8700_A,-2), protect(set8700_A) == 64
+protect(set8700_A,5), protect(set8700_A) == 69
+protect(set8700_A,-4), protect(set8700_A) == 65
+protect(set8700_A,0), protect(set8700_A) == 0
+protect(set8700_A,1234), protect(set8700_A) == 1234
+protect(set8700_A,-1234), protect(set8700_A) == 0
+protect(set8700_A,65535), protect(set8700_A) == 65535
+protect(set8700_A,-65535), protect(set8700_A) == 0
+
+## Simple assignments
+set8700_A = 42, protect(set8700_A,1024), set8700_B = set8700_A, protect(set8700_B) == 1024
+set8700_A = 6 * 7, protect(set8700_A) == 1024
+set8700_A == set8700_B
+
+## Testing matrix protectioon
+set8700_A = mat [3] = {1, 2, list(3,4)}; 1
+protect(set8700_A, 65, 1), protect(set8700_A) == 1089
+protect(set8700_A[0]) == 65
+protect(set8700_A[2]) == 65
+protect(set8700_A[2][1]) == 0
+protect(set8700_A, 65, 2), protect(set8700_A[2][1]) == 65
+protect(set8700_A,-1024), protect(set8700_A) == 65
+protect(set8700_A, -1, 1), protect(set8700_A) == 64
+protect(set8700_A[1]) == 64
+protect(set8700_A[2]) == 64
+protect(set8700_A[2][0]) == 65
+protect(set8700_A,0), protect(set8700_A) == 0
+protect(set8700_A[1]) == 64
+protect(set8700_A, 0, 2), protect(set8700_A) == 0
+protect(set8700_A[1]) == 0
+protect(set8700_A[2][1]) == 0
+protect(set8700_A,1024, 2), protect(set8700_A) == 1024
+protect(set8700_A[2]) == 1024
+protect(set8700_A[2][0], 512), protect(set8700_A[2][0]) == 1536
+
+## Testing simple assignment of matrix
+set8700_B = set8700_A, protect(set8700_B) == 1024	## protect(set8700_A) copied
+protect(set8700_B[2]) == 1024		## protect(set8700_A[2]) copied
+protect(set8700_B[2][0]) == 1536	## protect(set8700_A[2][0]) copied
+
+## copying matrix to list
+set8700_B = list(5,6,7), protect(set8700_B) == 1024
+protect(set8700_B[0]) == 0
+protect(set8700_B[2]) == 0
+protect(set8700_A,0), protect(set8700_A) == 0
+copy(set8700_A,set8700_B), set8700_B[0] == 1 && set8700_B[1] == 2
+set8700_B[2] == list(3,4)
+protect(set8700_B) == 1024		## protect(set8700_A) not copied
+protect(set8700_B[0]) == 1024		## protect(set8700_A[0]) copied
+protect(set8700_B[2][0]) == 1536	## protect(set8700_A[2][0]) copied
+
+## copying matrix to matrix
+set8700_B = mat[3], protect(set8700_B) == 1024
+protect(set8700_B[2]) == 0
+copy(set8700_A,set8700_B), set8700_B[0] == 1 && set8700_B[1] == 2
+set8700_B[2] == list(3,4)
+protect(set8700_B) == 1024		## protect(set8700_A) not copied
+protect(set8700_B[0]) == 1024		## protect(set8700_A[0]) copied
+protect(set8700_B[2][0]) == 1536	## protect(set8700_A[2][0]) copied
+
+## Testing list protection
+set8700_A = list(1, 2, list(3,4)), 1
+protect(set8700_A,1024, 2), protect(set8700_A) == 1024
+protect(set8700_A[2]) == 1024
+protect(set8700_A[2][0], 512), protect(set8700_A[2][0]) == 1536
+
+## Simple assignment of list
+set8700_B = set8700_A, protect(set8700_B) == 1024	## protect(set8700_A) copied
+protect(set8700_B[2]) == 1024		## protect(set8700_A[2]) copied
+protect(set8700_B[2][0]) == 1536	## protect(set8700_A[2][0]) copied
+
+## Copying list to list
+set8700_B = list(5,6,7), protect(set8700_B) == 1024
+protect(set8700_B[2]) == 0
+copy(set8700_A,set8700_B), set8700_B[0] == 1 && set8700_B[1] == 2
+set8700_B[2] == list(3,4)
+protect(set8700_B) == 1024		## protect(set8700_A) not copied
+protect(set8700_B[0]) == 1024		## protect(set8700_A[0]) copied
+protect(set8700_B[2][0]) == 1536	## protect(set8700_A[2][0]) copied
+
+## Copying list to matrix
+set8700_B = mat[3], protect(set8700_B) == 1024
+protect(set8700_B[2]) == 0
+copy(set8700_A,set8700_B), set8700_B[0] == 1 && set8700_B[1] == 2
+set8700_B[2] == list(3,4)
+protect(set8700_B) == 1024
+protect(set8700_B[0]) == 1024		## protect(set8700_A[0]) copied
+protect(set8700_B[2][0]) == 1536	## protect(set8700_A[2][0]) copied
+
+## Protecting one element of a list
+set8700_A = list(1,4,3,2), protect(set8700_A[1]) == 0
+protect(set8700_A[1], 1024), protect(set8700_A[1]) == 1024
+
+## Testing sort
+set8700_A = sort(set8700_A), set8700_A == list(1,2,3,4)
+protect(set8700_A[1]) == 0
+protect(set8700_A[3]) == 1024		## status of 4
+
+## Testings reverse
+set8700_A = reverse(set8700_A), set8700_A == list(4,3,2,1)
+protect(set8700_A[0]) == 1024		## status of 4
+
+## Testing swap
+swap(set8700_A[0], set8700_A[1]), set8700_A == list(3,4,2,1)
+protect(set8700_A[0]) == 0		## status moved
+protect(set8700_A[1]) == 1024		## 4 retains protection
+
+## Testing list with protected list argument
+protect(set8700_A, 0), protect(set8700_A) == 0
+protect(set8700_A, 512), protect(set8700_A) == 512
+protect(set8700_A[1]) == 1024
+set8700_L = list(1,set8700_A,3), protect(set8700_L) == 0
+protect(set8700_L[0]) == 0
+protect(set8700_L[1]) == 512		## protect(set8700_A) copied
+protect(set8700_L[1][1]) == 1024	## protect(set8700_A[1]) copied
+
+## Testing list with "intialization"
+set8700_L = list(1,2,3), protect(set8700_L) == 0
+protect(set8700_L[0]) | protect(set8700_L[1]) | protect(set8700_L[2]) == 0	## All zero
+set8700_L = {1,set8700_A}, set8700_L[1] == set8700_A
+protect(set8700_L[1]) == 512		## protect(set8700_A) copied
+protect(set8700_L[1][1]) == 1024	## protect(set8700_A[1]) copied
+set8700_L[1] = 2, protect(set8700_L[1]) == 512	## Not changed
+
+## Testing matrix with "initialization"
+set8700_M = mat[3] = {1,set8700_A}, protect(set8700_M) == 0
+protect(set8700_M[0]) == 0
+protect(set8700_M[1]) == 512		## protect(set8700_A) copied
+protect(set8700_M[2]) == 0
+protect(set8700_M[1][1]) == 1024	## protect(set8700_A[1]) copied
+
+## Testing push, pop, append, remove
+set8700_A = list(1,2), protect(set8700_A,0,1), protect(set8700_A[0]) == 0
+protect(set8700_A[0], 256), protect(set8700_A[0]) == 256
+protect(set8700_A[1]) == 0
+append(set8700_A, pop(set8700_A)), protect(set8700_A[0]) ==  0
+protect(set8700_A[1]) == 256
+push(set8700_A, remove(set8700_A)), protect(set8700_A[0]) == 256
+protect(set8700_A[1]) == 0
+
+## Testing operation-assignments
+set8700_A = 5, protect(set8700_A,1024), protect(set8700_A) == 1024
+protect(set8700_A, 1024), set8700_A = 7, protect(set8700_A) == 1024
+protect(set8700_A,1024), set8700_A += 2, protect(set8700_A) == 1024
+protect(set8700_A,1024), set8700_A *= 2, protect(set8700_A) == 1024
+protect(set8700_A,1024), set8700_A |= 2, protect(set8700_A) == 1024
+protect(set8700_A,1024), set8700_A &= 2, protect(set8700_A) == 1024
+protect(set8700_A,1024), set8700_A ^= 2, protect(set8700_A) == 1024
+
+protect(set8700_B,0), set8700_B = set8700_getA1(), protect(set8700_B) == 1024
+protect(set8700_B,0), set8700_B = set8700_getA2(), protect(set8700_B) == 1024
+set8700_B = set8700_getvar(), protect(set8700_B) == 1024 + 256
+
+set8700_x = 7,  protect(set8700_x) == 0
+protect(7,2) == error(10234)
+protect(set8700_x,2.5) == error(10235)
+protect(set8700_x,"abc") == error(10235)
+protect(set8700_x, 1e6) == error(10235)
+protect(set8700_x,1), (set8700_x = 2) == error(10366)
+(set8700_x = 3 + 4) == error(10366)
+
+protect(set8700_x,2), protect(set8700_x) == 3
+protect(set8700_x,-1), protect(set8700_x) == 2
+(set8700_x = 2) == error(10368)
+(set8700_x = 3 + 4) == 7
+protect(set8700_x,2), ++set8700_x == error(10379)
+set8700_x == 7
+--set8700_x == error(10382)
+set8700_x == 7
+set8700_x++ == error(10385)
+set8700_x == 7
+set8700_x-- == error(10388)
+
+protect(set8700_A,0), protect(set8700_A,16), 1
+set8700_A = "abcdef", protect(set8700_A) == 16		## No copy to set8700_A
+protect(set8700_B,0), set8700_B = "xyz", protect(set8700_B) == 0
+copy(set8700_B, set8700_A) == error(10226)
+set8700_A == "abcdef"				## set8700_A not changed
+protect(set8700_A,0), copy(set8700_B,set8700_A), set8700_A == "xyzdef"
+protect(set8700_B,128), protect(set8700_B) == 128	## No copy from set8700_B
+copy(set8700_B,set8700_A,,,3) == error(10225)
+set8700_A == "xyzdef"
+protect(set8700_B,0), copy(set8700_B,set8700_A,,,3), set8700_A == "xyzxyz"
+
+set8700_A = "abcdef", protect(set8700_A, 16), swap(set8700_A[0], set8700_A[5]) == error(10371)
+set8700_A == "abcdef"
+protect(set8700_A,0), isnull(swap(set8700_A[0], set8700_A[5]))
+set8700_A == "fbcdea"
+protect(set8700_A,2), ++set8700_A[0] == error(10377)
+--set8700_A[1] == error(10380)
+set8700_A[2]++ == error(10383)
+set8700_A[3]-- == error(10386)
+set8700_A == "fbcdea"
+protect(set8700_A,0), ++set8700_A[0] == 'g'
+--set8700_A[1] == 'a'
+set8700_A[2]++ == ord('c')
+set8700_A[3]-- == ord('d')
+set8700_A == "gadcea"
+
+protect(set8700_x,0), protect(set8700_y,0), protect(set8700_x,256), protect(set8700_y,512),1
+quomod(11,4,set8700_x,set8700_y), set8700_x == 2 && set8700_y == 3
+protect(set8700_x) == 256
+protect(set8700_y) == 512
+
+set8700_A = mat[3]; protect(set8700_A[0], 1024); protect(set8700_A[0]) == 1024
+set8700_x = 7, protect(set8700_x,0), protect(set8700_x, 512), 1
+set8700_A = {set8700_x,,set8700_x}, protect(set8700_A[0]) == 1536
+protect(set8700_A[1]) == 0
+protect(set8700_A[2]) == 512
+protect(set8700_A,16), protect(set8700_A) == 16		## No copy to
+set8700_A == (mat[3] = {7,0,7})
+set8700_A = {1,2,3}, errno() == 10390;
+set8700_A == (mat[3] = {7,0,7})
+
+protect(set8700_A,0), set8700_A = {1,2,3}, set8700_A == (mat[3] = {1,2,3})
+protect(set8700_A[1],1), protect(set8700_A[1]) == 1
+set8700_A = {4,5,6}, errno() == 10394
+set8700_A == (mat[3] = {4,2,6})
+modify(7, "set8700_f") == error(10405)
+set8700_A = list(2,3,5), modify(set8700_A, 7) == error(10406)
+protect(set8700_A,2), modify(set8700_A, "set8700_f") == error(10407)
+protect(set8700_A,0), modify(set8700_A, "h") == error(10408)
+set8700_B = 42, protect(set8700_B,0), modify(set8700_B, "set8700_f") == error(10409)
+set8700_A == list(2,3,5)		## set8700_A not affected by failures
+protect(set8700_A,0,1), modify(set8700_A, "set8700_f") == null()
+set8700_A == list(4,9,25)
+modify(set8700_A,"set8700_g") == null()
+protect(set8700_A[0]) == 0
+protect(set8700_A[1]) == 256 && protect(set8700_A[2]) == 256
+
+set8700_A = 0, protect(set8700_A,0), set8700_A = pop(2), set8700_A == error(10181)
+set8700_A = pop(list(1,2,3)), set8700_A == error(10181)
+set8700_B = set8700_A = pop(2), set8700_B == error(10181)
+set8700_A = 32, protect(set8700_A,8), (set8700_A = pop(2)) == error(10370)
+set8700_A == 32
+set8700_B = set8700_A = pop(2), set8700_B == error(10370)
+## Testing copying of protected elements and initialization
+set8700_M1 = mat[3], protect(set8700_M1,0), protect(set8700_M1[1],1), protect(set8700_M1[1]) == 1
+set8700_M2 = mat[3], protect(set8700_M2,0), protect(set8700_M2[2],4), protect(set8700_M2[2]) == 4
+set8700_L = list(set8700_M1, set8700_M2), protect(set8700_L[0][1]) == 1 && protect(set8700_L[1][2]) == 4
+set8700_L = {{1,2,3},{'a','b','c'}}, set8700_L[0] == (mat[3] = {1,0,3})
+set8700_L[1] == (mat[3] = {'a','b',0})
+set8700_M = mat[2], protect(set8700_M,0), set8700_M = {1,2,3,4}, set8700_M == (mat[2] = {1,2})
+set8700_x = 5, set8700_M = {set8700_x++, set8700_x++, set8700_x++, set8700_x++, set8700_x++}, set8700_M == (mat[2] = {5,6})
+set8700_x == 10		## All initialization terms evaluated
+set8700_S = "   ", set8700_S = {'a','b','c','d'}, set8700_S == "abc"
+
+set8700_P = obj set8700_point = {1,2,3,4}, set8700_P.set8700_x == 1 && set8700_P.set8700_y == 2 && set8700_P.set8700_z == 3
+protect(set8700_P,16), set8700_Q = set8700_P, set8700_Q = {5,6,7}, set8700_Q == set8700_P
+set8700_P == (obj set8700_point = {1,2,3})
+set8700_L = list(mat[1] = {set8700_P}), protect(set8700_L[0][0]) == 16
+set8700_L = {{{4,5,6}}}, set8700_L[0][0] == set8700_P
+protect(set8700_L,0,2), set8700_L = {{{4,5,6}}}, set8700_L[0][0] == (obj set8700_point = {4,5,6})
+
+## Testing quomod
+quomod(14,5,3,4) == error(10374)
+global set8700_a,set8700_b; quomod("abc", 4, set8700_a, set8700_b) == error(10375)
+quomod(14,5,set8700_a,set8700_b,0) == 1 && set8700_a == 2 && set8700_b == 4
+quomod(14,5,set8700_a,set8700_b,1) == 1 && set8700_a == 3 && set8700_b == -1
+quomod("abc",2,set8700_a,set8700_b) == error(10375)
+set8700_a = "abc"; quomod(14,5,set8700_a,set8700_b) == error(10375)
+set8700_a = null(); quomod(14,5,set8700_a,set8700_b,24) == 1; set8700_a == 3 && set8700_b == -1
+quomod(14,5,set8700_a,set8700_a) == error(10374)
+quomod(14,5,set8700_a,set8700_b,-1) == error(10375)
+protect(set8700_a,1); quomod(17,2,set8700_a,set8700_b) == error(10376)
+protect(set8700_a,0); quomod(17,2,set8700_a,set8700_b); set8700_a == 8 && set8700_b == 1
+set8700_p = &set8700_a, set8700_q = &set8700_b; quomod(14,5,*set8700_p,*set8700_q); *set8700_p == 2 && *set8700_q == 4
+
+## Testing estr
+base(1/3) == 10
+strcmp(estr(null()), "\"\"") == 0
+strcmp(estr(bernoulli(48)), "-5609403368997817686249127547/46410") == 0
+strcmp(estr(sin(3i)), "1001787492740990189897i/100000000000000000000") == 0
+base(10) == 1/3
+strcmp(estr("fizzbin"), "\"fizzbin\"") == 0
+strcmp(estr(set8700_c), "mat[5]={1,2+3i,-5+4i,6+5i,-7i}") == 0
+strcmp(estr(set8700_e), "mat[16]={0,1,0,0,2,-3/2,2,-1/2,-3,1/2,-1,1/2,1,0,0,0}") == 0
+strcmp(estr(list(2,3,5)), "list(2,3,5)") == 0

cal/sumtimes.cal

@@ -0,0 +1,186 @@
+/*
+ * sumtimes - runtimes evaluating sums & squares of large lists and mats
+ *
+ * Copyright (C) 2006  Ernest Bowen
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.1 $
+ * @(#) $Id: sumtimes.cal,v 29.1 2006/06/23 00:35:30 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/sumtimes.cal,v $
+ *
+ * Under source code control:	2006/06/22 17:29
+ * File existed as early as:	2006
+ *
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+global sumtimes_t0, sumtimes_t1, sumtimes_t2, sumtimes_t3;
+global sumtimes_A, sumtimes_B;
+config("tilde", 0),;
+
+define timematsum(N) {
+    local n, s, p, ptop;
+
+    sumtimes_A = mat[N];
+
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+
+    ptop = &sumtimes_A[n-1];
+    sumtimes_t0 = runtime();
+    for (s = n = 0; n < N; n++) s += sumtimes_A[n];
+    sumtimes_t1 = runtime();
+    for (s = 0, p = &sumtimes_A[0]; p <= ptop; p++) s += *p;
+    sumtimes_t2 = runtime();
+    s = matsum(sumtimes_A);
+    sumtimes_t3 = runtime();
+
+    print "Matrix sum runtimes";
+    printf('\tStandard "for" loop:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+    printf('\t"For" loop using pointers:\t\t%.4f\n', sumtimes_t2 - sumtimes_t1);
+    printf('\tUsing builtin "matsum":\t\t%.4f\n', sumtimes_t3 - sumtimes_t2);
+}
+
+define timelistsum(N) {
+    local n, s;
+
+    sumtimes_A = makelist(N);
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+
+    sumtimes_t0 = runtime();
+    for (s = n = 0; n < N; n++) s += sumtimes_A[n];
+    sumtimes_t1 = runtime();
+    s = sum(sumtimes_A);
+    sumtimes_t2 = runtime();
+    print "List sum runtimes";
+    printf('\tStandard "for" loop:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+    printf('\tUsing builtin "sum":\t\t%.4f\n', sumtimes_t2 - sumtimes_t1);
+}
+
+
+define timematsort(N) {
+    local n;
+
+    sumtimes_A = mat[N];
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+    sumtimes_t0 = runtime();
+    sort(sumtimes_A);
+    sumtimes_t1 = runtime();
+    printf('\tMatrix sort runtime:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+}
+
+
+define timelistsort(N) {
+    local n;
+
+    sumtimes_A = makelist(N);
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+    sumtimes_t0 = runtime();
+    sort(sumtimes_A);
+    sumtimes_t1 = runtime();
+    printf('\tList sort runtime:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+}
+
+define timematreverse(N) {
+    local n;
+
+    sumtimes_A = mat[N];
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+    sumtimes_t0 = runtime();
+    reverse(sumtimes_A);
+    sumtimes_t1 = runtime();
+    printf('\tMatrix reverse runtime        %.4f\n', sumtimes_t1 - sumtimes_t0);
+}
+
+define timelistreverse(N) {
+    local n;
+
+    sumtimes_A = makelist(N);
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+    sumtimes_t0 = runtime();
+    reverse(sumtimes_A);
+    sumtimes_t1 = runtime();
+    printf('\tList reverse runtime:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+}
+
+define timematssq(N) {
+    local n, s, p, ptop;
+
+    sumtimes_A = mat[N];
+
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+
+    ptop = &sumtimes_A[n-1];
+    sumtimes_t0 = runtime();
+    for (s = n = 0; n < N; n++) s += sumtimes_A[n]^2;
+    sumtimes_t1 = runtime();
+    for (s = 0, p = &sumtimes_A[0]; p <= ptop; p++) s += (*p)^2;
+    sumtimes_t2 = runtime();
+
+    print "Matrix sum of squares runtimes";
+    printf('\tStandard "for" loop:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+    printf('\t"For" loop using pointers:\t\t%.4f\n', sumtimes_t2 - sumtimes_t1);
+}
+
+define timelistssq(N) {
+    local n, s;
+
+    sumtimes_A = makelist(N);
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+
+    sumtimes_t0 = runtime();
+    for (s = n = 0; n < N; n++) s += sumtimes_A[n]^2;
+    sumtimes_t1 = runtime();
+    s = ssq(sumtimes_A);
+    sumtimes_t2 = runtime();
+    print "List sum of squares runtimes";
+    printf('\tStandard "for" loop:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+    printf('\tUsing builtin "ssq":\t\t%.4f\n', sumtimes_t2 - sumtimes_t1);
+}
+
+define timehmean(N, M = 10) {
+    local n, s, v1, v2;
+
+    sumtimes_A = makelist(N);
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(1, M);
+
+    sumtimes_t0 = runtime();
+    for (s = n = 0; n < N; n++) s += 1/sumtimes_A[n];
+    v1 = N/s;
+    sumtimes_t1 = runtime();
+    v2 = hmean(sumtimes_A);
+    sumtimes_t2 = runtime();
+    print v1, v2;
+    print "List harmonic meanruntimes";
+    printf('\tStandard "for" loop:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+    printf('\tUsing builtin "hmean":\t\t%.4f\n', sumtimes_t2 - sumtimes_t1);
+}
+
+define doalltimes(N) {
+    timematsum(N);
+    print;
+    timelistsum(N);
+    print;
+    timematssq(N);
+    print;
+    timelistssq(N);
+    print;
+    timematsort(N);
+    timelistsort(N);
+    timematreverse(N);
+    timelistreverse(N);
+    print;
+}

cal/test2700.cal

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test2700.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: test2700.cal,v 29.4 2006/06/25 22:06:23 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test2700.cal,v $
  *
  * Under source code control:	1995/11/01 22:52:25
@@ -41,8 +41,7 @@
  */
 
 
-global defaultverbose = 1;
-global err;
+defaultverbose = 1;
 
 define mknonnegreal() {
 	switch(rand(8)) {
@@ -89,11 +88,11 @@ define mkfrac() = rand(2) ? mkposfrac() : -mkposfrac();
 define mksquarereal() = mknonnegreal()^2;
 
 /*
- * XXX - Should be able to do better than the following.  For nonsquare
- * positive integer less than 1e6, could use
+ * We might be able to do better than the following.  For nonsquare
+ * positive integer less than 1e6, could use:
  *		 x = rand(1, 1000);
  *		 return rand(x^2 + 1, (x + 1)^2);
- * Maybe could do
+ * Maybe could do:
  *		do
  *			x = mkreal_2700();
  *		while

cal/test3300.cal

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test3300.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: test3300.cal,v 29.3 2006/06/20 09:29:16 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test3300.cal,v $
  *
  * Under source code control:	1995/12/02 04:27:41
@@ -30,8 +30,7 @@
  */
 
 
-global defaultverbose = 1;	/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 define testi(str, n, N, verbose)
 {

cal/test3400.cal

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test3400.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: test3400.cal,v 29.3 2006/06/20 09:29:16 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test3400.cal,v $
  *
  * Under source code control:	1995/12/02 05:20:11
@@ -54,8 +54,7 @@
  */
 
 
-global defaultverbose = 1;	/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 global pi1k = pi(1e-1000);
 

cal/test3500.cal

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test3500.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: test3500.cal,v 29.3 2006/06/20 09:29:16 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test3500.cal,v $
  *
  * Under source code control:	1995/12/18 22:50:46
@@ -53,8 +53,7 @@
  */
 
 
-global defaultverbose = 1;	/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 define testfrem(x,y,verbose)
 {

cal/test4000.cal

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test4000.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: test4000.cal,v 29.3 2006/06/20 09:29:16 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test4000.cal,v $
  *
  * Under source code control:	1996/03/13 02:38:45
@@ -75,8 +75,7 @@
  */
 
 
-global defaultverbose = 1;	/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 /*
  * test defaults

cal/test4100.cal

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test4100.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: test4100.cal,v 29.4 2006/06/20 09:29:16 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test4100.cal,v $
  *
  * Under source code control:	1996/03/13 03:53:22
@@ -70,18 +70,16 @@
  */
 
 
-global defaultverbose = 1;	/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 /*
  * test defaults
  */
-global K1 = 2^17;
-global K2 = 2^12;
-global BASEB = 16;
-global BASE = 2^BASEB;
+global test4100_K1 = 2^17;
+global test4100_K2 = 2^12;
+global test4100_BASE = 2^config("baseb");
 
-define rlen_4100(N) = rand(BASE^(N-1), BASE^N);
+define rlen_4100(N) = rand(test4100_BASE^(N-1), test4100_BASE^N);
 
 define olen(N)
 {
@@ -234,7 +232,7 @@ define times(str,N,n,verbose)
 	m = olen(N);
 	m2 = m^2;
 	if (isnull(n)) {
-		n = ceil(K1/power(N,1.585));
+		n = ceil(test4100_K1/power(N,1.585));
 		if (verbose > 1)
 			printf("n = %d\n", n);
 	}
@@ -308,7 +306,7 @@ define powtimes(str, N1, N2, n, verbose)
 		N2 = 1;
 
 	if (isnull(n)) {
-		n = ceil(K2/power(N1, 1.585)/N2);
+		n = ceil(test4100_K2/power(N1, 1.585)/N2);
 		printf ("n  = %d\n", n);
 	}
 	mat A[n];
@@ -316,8 +314,8 @@ define powtimes(str, N1, N2, n, verbose)
 	mat B[n];
 	v = olen(N1);
 
-	cp = config("pow2", 1);
-	crc = config("redc2", 1);
+	cp = config("pow2", 2);
+	crc = config("redc2", 2);
 
 	/* initialize redc and lastmod info */
 
@@ -346,7 +344,7 @@ define powtimes(str, N1, N2, n, verbose)
 	for (i = 0; i < n; i++)
 		z4 += rcpow(Ar[i], B[i], v);
 	trcsmall = round(runtime() - t, 4);
-	config("redc2", 1);
+	config("redc2", 2);
 	t = runtime();
 	for (i = 0; i < n; i++)
 		z5 += rcpow(Ar[i], B[i], v);
@@ -408,7 +406,7 @@ define inittimes(str,N,n,verbose)
 	}
 	m = 0;
 	if (isnull(n)) {
-		n = ceil(K1/N^2);
+		n = ceil(test4100_K1/N^2);
 		if (verbose > 1) {
 			printf ("n = %d\n", n);
 		}

cal/test4600.cal

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test4600.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: test4600.cal,v 29.5 2006/06/20 09:29:16 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test4600.cal,v $
  *
  * Under source code control:	1996/07/02 20:04:40
@@ -30,8 +30,7 @@
  */
 
 
-global defaultverbose = 1		/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 /*
  * test globals
@@ -53,10 +52,10 @@ define stest(str, verbose)
 	/*
 	 * do file operations
 	 */
-	f = fopen("junk4600", "w");
+	f = fopen("junk4600", "wb");
 	if (iserror(f)) {
 		print 'failed';
-		print '**** fopen("junk4600", "w") failed';
+		print '**** fopen("junk4600", "wb") failed';
 		return 1;
 	}
 	if (iserror(fputs(f,
@@ -67,9 +66,9 @@ define stest(str, verbose)
 		print '**** fputs(f, "Fourscore ... failed';
 		return 1;
 	}
-	if (iserror(freopen(f, "r"))) {
+	if (iserror(freopen(f, "rb"))) {
 		print 'failed';
-		print '**** iserror(freopen(f, "r")) failed';
+		print '**** iserror(freopen(f, "rb")) failed';
 		return 1;
 	}
 	if (iserror(rewind(f))) {
@@ -173,7 +172,7 @@ define ttest(str, m, n, verbose)
 		print str:":",:;
 	}
 	i = rm("-f", "junk4600");
-	f = fopen("junk4600", "w");
+	f = fopen("junk4600", "wb");
 
 	if (isnull(n))
 		n = 4;
@@ -198,7 +197,7 @@ define ttest(str, m, n, verbose)
 	fflush(f);
 	if (verbose > 1)
 		printf("File has size %d\n", pos[i]);
-	freopen(f, "r");
+	freopen(f, "rb");
 	if (size(f) != pos[i]) {
 		print 'failed';
 		printf("**** Failure 1 for file size\n");

cal/test5100.cal

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test5100.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: test5100.cal,v 29.3 2006/06/20 09:29:16 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test5100.cal,v $
  *
  * Under source code control:	1996/12/02 23:57:10
@@ -30,8 +30,7 @@
  */
 
 
-global defaultverbose = 1;	/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 /*
  * We test the new code generator declaration scope and order.

cal/test5200.cal

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test5200.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: test5200.cal,v 29.3 2006/06/20 09:29:16 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test5200.cal,v $
  *
  * Under source code control:	1997/02/07 02:48:10
@@ -30,8 +30,7 @@
  */
 
 
-global defaultverbose = 1;	/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 /*
  * test the fix of a global/static bug

calc.h

@@ -1,7 +1,7 @@
 /*
  * calc - definitions for calculator program
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 1999-2006  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: calc.h,v 29.3 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.19 $
+ * @(#) $Id: calc.h,v 29.19 2006/08/20 15:01:30 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.h,v $
  *
  * Under source code control:	1990/02/15 01:48:31
@@ -32,10 +32,15 @@
 #define __CALC_H__
 
 #include <setjmp.h>
-
-#include "value.h"
-
-#include "have_const.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "win32dll.h"
+# include "value.h"
+# include "have_const.h"
+#else
+# include <calc/win32dll.h>
+# include <calc/value.h>
+# include <calc/have_const.h>
+#endif
 
 
 /*
@@ -55,15 +60,18 @@
 #define HOMECHAR	'~'	/* char which indicates home directory */
 #define DOTCHAR		'.'	/* char which indicates current directory */
 #define PATHCHAR	'/'	/* char which separates path components */
+#if defined(__MSDOS__) || defined(__WIN32)
+#define LISTCHAR	';'	/* char which separates paths in a list */
+#else
 #define LISTCHAR	':'	/* char which separates paths in a list */
+#endif
 #define MAXCMD		16384	/* maximum length of command invocation */
 #define MAXERROR	512	/* maximum length of error message string */
 
 #define SYMBOLSIZE	256	/* maximum symbol name size */
-#define MAXINDICES	20	/* maximum number of indices for objects */
 #define MAXLABELS	100	/* maximum number of user labels in function */
 #define MAXSTRING	1024	/* maximum size of string constant */
-#define MAXSTACK	1000	/* maximum depth of evaluation stack */
+#define MAXSTACK	2048	/* maximum depth of evaluation stack */
 #define MAXFILES	20	/* maximum number of opened files */
 #define PROMPT1		"> "	/* default normal prompt*/
 #define PROMPT2		">> "	/* default prompt inside multi-line input */
@@ -90,157 +98,163 @@
 #define FILEID_STDIN	((FILEID) 0)
 #define FILEID_STDOUT	((FILEID) 1)
 #define FILEID_STDERR	((FILEID) 2)
-#define FILEID_NONE	((FILEID) -1)
+#define FILEID_NONE	((FILEID) -1)	/* must be < 0 */
 
 /*
  * File I/O routines.
  */
-extern FILEID openid(char *name, char *mode);
-extern FILEID indexid(long index);
-extern BOOL validid(FILEID id);
-extern BOOL errorid(FILEID id);
-extern BOOL eofid(FILEID id);
-extern int closeid(FILEID id);
-extern int getcharid(FILEID id);
-extern int idprintf(FILEID id, char *fmt, int count, VALUE **vals);
-extern int idfputc(FILEID id, int ch);
-extern int idfputs(FILEID id, char *str);
-extern int printid(FILEID id, int flags);
-extern int flushid(FILEID id);
-extern int readid(FILEID id, int flags, char **retptr);
-extern int getloc(FILEID id, ZVALUE *loc);
-extern int setloc(FILEID id, ZVALUE zpos);
-extern int getsize(FILEID id, ZVALUE *size);
-extern int get_device(FILEID id, ZVALUE *dev);
-extern int get_inode(FILEID id, ZVALUE *ino);
-extern FILEID reopenid(FILEID id, char *mode, char *name);
-extern int closeall(void);
-extern int flushall(void);
-extern int idfputstr(FILEID id, char *str);
-extern int rewindid(FILEID id);
-extern void rewindall(void);
-extern ZVALUE zfilesize(FILEID id);
-extern void showfiles(void);
-extern int fscanfid(FILEID id, char *fmt, int count, VALUE **vals);
-extern int scanfstr(char *str, char *fmt, int count, VALUE **vals);
-extern int ftellid(FILEID id, ZVALUE *res);
-extern int fseekid(FILEID id, ZVALUE offset, int whence);
-extern int isattyid(FILEID id);
-extern int fsearch(FILEID id, char *str, ZVALUE start, ZVALUE end, ZVALUE *res);
-extern int frsearch(FILEID id, char *str, ZVALUE first, ZVALUE last, ZVALUE *res);
-extern void showconstants(void);
-extern void freeconstant(unsigned long);
-extern void freestringconstant(long);
-extern void trimconstants(void);
+extern DLL FILEID openid(char *name, char *mode);
+extern DLL FILEID openpathid(char *name, char *mode, char *pathlist);
+extern DLL FILEID indexid(long index);
+extern DLL BOOL validid(FILEID id);
+extern DLL BOOL errorid(FILEID id);
+extern DLL BOOL eofid(FILEID id);
+extern DLL int closeid(FILEID id);
+extern DLL int getcharid(FILEID id);
+extern DLL int idprintf(FILEID id, char *fmt, int count, VALUE **vals);
+extern DLL int idfputc(FILEID id, int ch);
+extern DLL int idfputs(FILEID id, STRING *str);
+extern DLL int printid(FILEID id, int flags);
+extern DLL int flushid(FILEID id);
+extern DLL int readid(FILEID id, int flags, STRING **retptr);
+extern DLL int getloc(FILEID id, ZVALUE *loc);
+extern DLL int setloc(FILEID id, ZVALUE zpos);
+extern DLL int getsize(FILEID id, ZVALUE *size);
+extern DLL int get_device(FILEID id, ZVALUE *dev);
+extern DLL int get_inode(FILEID id, ZVALUE *ino);
+extern DLL FILEID reopenid(FILEID id, char *mode, char *name);
+extern DLL int closeall(void);
+
+#if !defined(_WIN32)
+extern DLL int flushall(void);
+#endif
+
+extern DLL int idfputstr(FILEID id, char *str);
+extern DLL int rewindid(FILEID id);
+extern DLL void rewindall(void);
+extern DLL ZVALUE zfilesize(FILEID id);
+extern DLL void showfiles(void);
+extern DLL int fscanfid(FILEID id, char *fmt, int count, VALUE **vals);
+extern DLL int scanfstr(char *str, char *fmt, int count, VALUE **vals);
+extern DLL int ftellid(FILEID id, ZVALUE *res);
+extern DLL int fseekid(FILEID id, ZVALUE offset, int whence);
+extern DLL int isattyid(FILEID id);
+extern DLL int fsearch(FILEID id, char *str, ZVALUE start, ZVALUE end, ZVALUE *res);
+extern DLL int frsearch(FILEID id, char *str, ZVALUE first, ZVALUE last, ZVALUE *res);
+extern DLL void showconstants(void);
+extern DLL void freeconstant(unsigned long);
+extern DLL void freestringconstant(long);
+extern DLL void trimconstants(void);
 
 /*
  * Input routines.
  */
-extern int openstring(char *str, long num);
-extern int openterminal(void);
-extern int opensearchfile(char *name, char *pathlist, char *exten, int reopen_ok);
-extern char *nextline(void);
-extern int nextchar(void);
-extern void reread(void);
-extern void resetinput(void);
-extern void setprompt(char *);
-extern BOOL inputisterminal(void);
-extern int inputlevel(void);
-extern long calclevel(void);
-extern char *inputname(void);
-extern long linenumber(void);
-extern void runrcfiles(void);
-extern void closeinput(void);
+extern DLL int openstring(char *str, size_t num);
+extern DLL int openterminal(void);
+extern DLL int opensearchfile(char *name, char *pathlist, char *exten, int reopen_ok);
+extern DLL char *nextline(void);
+extern DLL int nextchar(void);
+extern DLL void reread(void);
+extern DLL void resetinput(void);
+extern DLL void setprompt(char *);
+extern DLL BOOL inputisterminal(void);
+extern DLL int inputlevel(void);
+extern DLL long calclevel(void);
+extern DLL char *inputname(void);
+extern DLL long linenumber(void);
+extern DLL void runrcfiles(void);
+extern DLL void closeinput(void);
 
 /*
  * Other routines.
  */
-extern NUMBER *constvalue(unsigned long index);
-extern long addnumber(char *str);
-extern long addqconstant(NUMBER *q);
-extern void initstack(void);
-extern void getcommands(BOOL toplevel);
-extern void givehelp(char *type);
-extern void libcalc_call_me_first(void);
-extern void libcalc_call_me_last(void);
-extern BOOL calc_tty(int fd);
-extern BOOL orig_tty(int fd);
-extern void showerrors(void);
-extern char *calc_strdup(CONST char *);
-extern void getshellfile(char *shellfile);
+extern DLL NUMBER *constvalue(unsigned long index);
+extern DLL long addnumber(char *str);
+extern DLL long addqconstant(NUMBER *q);
+extern DLL void initstack(void);
+extern DLL void getcommands(BOOL toplevel);
+extern DLL void givehelp(char *type);
+extern DLL void libcalc_call_me_first(void);
+extern DLL void libcalc_call_me_last(void);
+extern DLL BOOL calc_tty(int fd);
+extern DLL BOOL orig_tty(int fd);
+extern DLL void showerrors(void);
+extern DLL char *calc_strdup(CONST char *);
 
 /*
  * Initialization
  */
-extern void initialize(void);
-extern void reinitialize(void);
-extern int isatty(int tty);	/* TRUE if fd is a tty */
-extern char *version(void);	/* return version string */
-extern int post_init;		/* TRUE => setjmp for math_error is ready */
+extern DLL void initialize(void);
+extern DLL void reinitialize(void);
+#if !defined (_WIN32)
+extern DLL int isatty(int tty);	/* TRUE if fd is a tty */
+#endif
+extern DLL char *version(void);	/* return version string */
+extern DLL int post_init;	/* TRUE => math_error setjmp is ready */
 
 /*
  * global flags and definitions
  */
-extern int abortlevel;		/* current level of aborts */
-extern BOOL inputwait;		/* TRUE if in a terminal input wait */
-extern jmp_buf jmpbuf;		/* for errors */
+extern DLL int abortlevel;	/* current level of aborts */
+extern DLL BOOL inputwait;	/* TRUE if in a terminal input wait */
+extern DLL jmp_buf jmpbuf;	/* for errors */
 
-extern int p_flag;		/* TRUE => pipe mode */
-extern int q_flag;		/* TRUE => don't execute rc files */
-extern int u_flag;		/* TRUE => unbuffer stdin and stdout */
-extern int d_flag;		/* TRUE => disable heading, resource_debug */
-extern int c_flag;		/* TRUE => continue after error if permitted */
-extern int i_flag;		/* TRUE => try to go interactive after error */
-extern int s_flag;		/* TRUE => keep args as strings for argv() */
-extern int stoponerror;		/* >0 => stop, <0 => continue, ==0 => use -c */
-extern BOOL abort_now;		/* TRUE => try to go interactive */
+extern DLL int p_flag;		/* TRUE => pipe mode */
+extern DLL int q_flag;		/* TRUE => don't execute rc files */
+extern DLL int u_flag;		/* TRUE => unbuffer stdin and stdout */
+extern DLL int d_flag;		/* TRUE => disable heading, resource_debug */
+extern DLL int c_flag;		/* TRUE => continue after error if permitted */
+extern DLL int i_flag;		/* TRUE => try to go interactive after error */
+extern DLL int s_flag;		/* TRUE => keep args as strings for argv() */
+extern DLL long stoponerror;	/* >0 => stop, <0 => continue, ==0 => use -c */
+extern DLL BOOL abort_now;	/* TRUE => try to go interactive */
 
-extern int argc_value;		/* count of argv[] strings for argv() builtin */
-extern char **argv_value;	/* argv[] strings for argv() builtin */
+extern DLL int argc_value;	/* count of argv[] strings for argv() builtin */
+extern DLL char **argv_value;	/* argv[] strings for argv() builtin */
 
-extern char *pager;		/* $PAGER or default */
-extern int stdin_tty;		/* TRUE if stdin is a tty */
-extern int havecommands;	/* TRUE if have cmd args) */
-extern char *program;		/* our name */
-extern char *base_name;		/* basename of our name */
-extern char cmdbuf[];		/* command line expression */
+extern DLL char *pager;		/* $PAGER or default */
+extern DLL int stdin_tty;	/* TRUE if stdin is a tty */
+extern DLL int havecommands;	/* TRUE if have cmd args) */
+extern DLL char *program;	/* our name */
+extern DLL char *base_name;	/* basename of our name */
+extern DLL char cmdbuf[];	/* command line expression */
 
-extern int abortlevel;		/* current level of aborts */
-extern BOOL inputwait;		/* TRUE if in a terminal input wait */
-extern VALUE *stack;		/* execution stack */
-extern int dumpnames;		/* TRUE => dump names rather than indices */
+extern DLL int abortlevel;	/* current level of aborts */
+extern DLL BOOL inputwait;	/* TRUE if in a terminal input wait */
+extern DLL VALUE *stack;	/* execution stack */
+extern DLL int dumpnames;	/* TRUE => dump names rather than indices */
 
-extern char *calcpath;		/* $CALCPATH or default */
-extern char *calcrc;		/* $CALCRC or default */
-extern char *calcbindings;	/* $CALCBINDINGS or default */
-extern char *home;		/* $HOME or default */
-extern char *shell;		/* $SHELL or default */
-extern char *program;		/* our name (argv[0]) */
+extern DLL char *calcpath;	/* $CALCPATH or default */
+extern DLL char *calcrc;	/* $CALCRC or default */
+extern DLL char *calcbindings;	/* $CALCBINDINGS or default */
+extern DLL char *home;		/* $HOME or default */
+extern DLL char *shell;		/* $SHELL or default */
+extern DLL char *program;	/* our name (argv[0]) */
 
-extern int no_env;	/* TRUE (-e) => ignore env vars on startup */
-extern int errmax;	/* if >= 0, error when errcount exceeds errmax */
-extern int new_std;	/* TRUE (-n) => use newstd configuration */
+extern DLL int no_env;		/* TRUE (-e) => ignore env vars on startup */
+extern DLL long errmax;	/* if >= 0, error when errcount exceeds errmax */
+extern DLL int use_old_std;	/* TRUE (-O) => use classic configuration */
 
-extern int allow_read;	/* FALSE => may not open any files for reading */
-extern int allow_write; /* FALSE => may not open any files for writing */
-extern int allow_exec;	/* FALSE => may not execute any commands */
+extern DLL int allow_read;	/* FALSE => dont open any files for reading */
+extern DLL int allow_write; 	/* FALSE => dont open any files for writing */
+extern DLL int allow_exec;	/* FALSE => may not execute any commands */
 
 /*
  * calc startup and run state
  */
 typedef enum {
-    RUN_UNKNOWN = -1,		/* unknown or unset start state */
-    RUN_BEGIN = 0,		/* calc execution starts */
-    RUN_RCFILES = 1,		/* rc files being evaluated */
-    RUN_PRE_CMD_ARGS = 2,	/* prepare to evaluate cmd args */
-    RUN_CMD_ARGS = 3,		/* cmd args being evaluated */
-    RUN_PRE_TOP_LEVEL = 4,	/* prepare to start top level activity */
-    RUN_TOP_LEVEL = 5,		/* running at top level */
-    RUN_EXIT = 6,		/* normal exit from calc */
-    RUN_EXIT_WITH_ERROR = 7	/* exit with error */
+    RUN_ZERO,			/* unknown or unset start state */
+    RUN_BEGIN,			/* calc execution starts */
+    RUN_RCFILES,		/* rc files being evaluated */
+    RUN_PRE_CMD_ARGS,		/* prepare to evaluate cmd args */
+    RUN_CMD_ARGS,		/* cmd args being evaluated */
+    RUN_PRE_TOP_LEVEL,		/* prepare to start top level activity */
+    RUN_TOP_LEVEL,		/* running at top level */
+    RUN_EXIT,			/* normal exit from calc */
+    RUN_EXIT_WITH_ERROR		/* exit with error */
 } run;
-extern run run_state;
-extern char *run_state_name(run state);
+extern DLL run run_state;
+extern DLL char *run_state_name(run state);
 
 /*
  * calc version information
@@ -249,9 +263,9 @@ extern char *run_state_name(run state);
 extern int calc_major_ver;
 extern int calc_minor_ver;
 extern int calc_major_patch;
-extern char *calc_minor_patch;
+extern int calc_minor_patch;
 extern char *Copyright;
-extern char *version(void);
+extern DLL char *version(void);
 
 
 #endif /* !__CALC_H__ */

calc.man

@@ -1,5 +1,5 @@
 .\"
-.\" Copyright (C) 1999	Landon Curt Noll
+.\" Copyright (C) 1999-2004	Landon Curt Noll
 .\"
 .\" Calc is open software; you can redistribute it and/or modify it under
 .\" the terms of the version 2.1 of the GNU Lesser General Public License
@@ -15,8 +15,8 @@
 .\" received a copy with calc; if not, write to Free Software Foundation, Inc.
 .\" 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 .\"
-.\" @(#) $Revision: 29.5 $
-.\" @(#) $Id: calc.man,v 29.5 2000/06/07 14:02:13 chongo Exp $
+.\" @(#) $Revision: 29.20 $
+.\" @(#) $Id: calc.man,v 29.20 2006/06/01 12:04:16 chongo Exp $
 .\" @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.man,v $
 .\"
 .\" Under source code control:	    1991/07/23 05:48:26
@@ -36,24 +36,25 @@ calc \- arbitrary precision calculator
 .RB [ \-c ]
 .RB [ \-C ]
 .RB [ \-d ]
-.RB [ -D\ \&calc_debug[:resource_debug[:user_debug]] ]
 .br
 .in +5n
+.RB [ -D\ \&calc_debug[:resource_debug[:user_debug]] ]
+.br
 .RB [ \-e ]
 .RB [ \-h ]
 .RB [ \-i ]
 .RB [ \-m\ \&mode ]
-.RB [ \-n ]
+.RB [ \-O ]
+.br
 .RB [ \-p ]
 .RB [ \-q ]
 .RB [ \-s ]
 .RB [ \-u ]
 .RB [ \-v ]
-.br
-.RB [ calc_cmd\ \&.\|.\|. ]
+.RB [ [\-\-]\ calc_cmd\ \&.\|.\|. ]
 .in -5n
 .sp
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ [other_flags\ \&...]
+\fI#!${BINDIR}/calc\fP\ [other_flags\ \&...] \fB\-f\fP
 .SH DESCRIPTION
 \&
 .br
@@ -62,8 +63,11 @@ CALC OPTIONS
 
 .TP
 .B \-c
-Continue reading command lines even after an execution
+Continue reading command lines even after an scan/parse
 error has caused the abandonment of a line.
+Note that this option only deals with scanning and
+parsing of the calc language.
+It does not deal with execution or run-time errors.
 .sp 1
 For example:
 .sp 1
@@ -75,7 +79,7 @@ calc read many_errors.cal
 .sp 1
 will cause
 .B calc
-to abort on the first error, whereas:
+to abort on the first syntax error, whereas:
 .sp 1
 .in +5n
 .nf
@@ -87,7 +91,7 @@ will
 cause
 .B calc
 to try to process each line being read
-despite the errors that it encounters.
+despite the scan/parse errors that it encounters.
 .sp 1
 By default, calc startup resource files are silently
 ignored if not found.
@@ -118,7 +122,7 @@ as if \fBconfig("resource_debug", 0)\fP had been executed.
 For example:
 .sp 1
 .in +5n
-calc 'read qtime; qtime(2)'
+calc "read qtime; qtime(2)"
 .in -5n
 .sp 1
 will output something like:
@@ -134,7 +138,7 @@ whereas:
 .sp 1
 .in +5n
 .nf
-calc -d 'read qtime; qtime(2)'
+calc -d "read qtime; qtime(2)"
 .fi
 .in -5n
 .sp 1
@@ -182,6 +186,80 @@ help config
 Ignore any environment variables on startup.
 The getenv() builtin will still return values, however.
 
+.TP
+.B \-f
+This flag is required when using calc in
+.BR "shell script mode" .
+It must be at the end of the initial
+.B #!
+line of the script.
+.sp 1
+This flag is normally only at the end of a calc shell script.
+If the first line of an executable file begins
+.B #!
+followed by the absolute pathname of the
+.B calc
+program and the flag
+.B \-f
+as in:
+.sp 1
+.in +5n
+.nf
+\fI#!${BINDIR}/calc\fP\ [other_flags\ \&...] \fB\-f\fP
+.fi
+.in -5n
+.sp 1
+the rest of the file will be processed in
+.BR "shell script mode" .
+See
+.B "SHELL SCRIPT MODE"
+section of this man page
+below for details.
+.sp 1
+The actual form of this flag is:
+.sp 1
+.in +5n
+.B \-f
+filename
+.in -5n
+.sp 1
+On systems that treat an executable that begins with
+.B #!
+as a script, the path of the execurable is appended by the kernel
+as the final argument to the exec() system call.
+This is why the
+.B \-f
+flag at the very end of the
+.B #!
+line.
+.sp 1
+It is possible use
+.B \-f\ filename
+on the command line:
+.sp 1
+.in +5n
+.nf
+\fIcalc\fP\ [other_flags\ \&...] \fB\-f\fP filename
+.fi
+.in -5n
+.sp 1
+This will cause calc to process lines in
+.B filename
+in
+.BR "shell script mode" .
+.sp 1
+Use of
+.B \-f
+implies
+.BR \-s .
+In addition,
+.B \-d
+and
+.B \-p
+are implied if
+.B \-i
+is not given.
+
 .TP
 .B \-h
 Print a help message.  This option implies
@@ -301,11 +379,22 @@ The reading of key bindings is also disabled
 when the mode disables opening of files for reading.
 
 .TP
-.B \-n
-Use the new configuration defaults instead of the old
-default classic defaults.
+.B \-O
+Use the old classic defaults instead of the
+default configuration.
 This flag as the same effect
-as executing \fBconfig("all", "newcfg")\fP at startup time.
+as executing \fBconfig("all", "oldcfg")\fP at startup time.
+.sp 1
+NOTE: Older versions of calc used
+.B \-n
+to setup a modified form of the default calc configuration.
+The
+.B \-n
+flag currently does nothing.
+Use of the
+.B \-n
+flag is now deprecated and may be used for
+something else in the future.
 
 .TP
 .B \-p
@@ -315,7 +404,7 @@ For example:
 .sp 1
 .in +5n
 .nf
-calc -p '2^21701-1' | fizzbin
+calc -p "2^21701-1" | fizzbin
 .fi
 .in -5n
 .sp 1
@@ -349,6 +438,21 @@ Disable buffering of stdin and stdout.
 Print the
 .B calc
 version number and exit.
+
+.TP
+.B \-\-
+The double dash indicates to calc that no more option follow.
+Thus calc will ignore a later argument on the command line
+even if it starts with a dash.
+This is useful when entering negative values on the command line as in:
+.sp 1
+.in +5n
+.nf
+calc \-p \-\- \-1 - -7
+.sp 1
+.fi
+.in -5n
+
 .PP
 
 \&
@@ -391,32 +495,50 @@ calc 23 + 47
 .fi
 .in -5n
 .sp 1
-should respond with display of 70, but
+will print 70.
+However, command lines will have problems:
 .sp 1
 .in +5n
 .nf
 calc 23 * 47
+.sp 1
+calc -23 + 47
 .fi
 .in -5n
 .sp 1
-may fail.
-Such cases can usually be made to work as expected by
-enclosing the command between single marks as in:
+The first example above fails because the shell interprets the '*'
+as a file glob.
+The second example fails because '\-23' is viewed as a calc option
+(which it is not) and do calc objects to that it thinks of as an unknown option.
+These cases can usually be made to work as expected by
+enclosing the command between quotes:
 .sp 1
 .in +5n
 .nf
 calc '23 * 47'
+.sp 1
+calc "print sqrt(2), exp(1)"
 .fi
 .in -5n
 .sp 1
-and
+or in parentheses and quotes to avoid leading \-'s as in:
 .sp 1
 .in +5n
 .nf
-calc 'print sqrt(2), exp(1)'
+calc '(-23 + 47)'
 .fi
 .in -5n
-.sp
+.sp 1
+One may also use a double dash to denote that calc options have ended as in:
+.sp 1
+.in +5n
+.nf
+calc -- -23 + 47
+.sp 1
+calc -q -- -23 + 47
+.fi
+.in -5n
+.sp 1
 If '!' is to be used to indicate the factorial function, for
 shells like
 .BI csh (1)
@@ -513,8 +635,8 @@ searches in succession:
 ./myfile.cal
 ${LIBDIR}/myfile
 ${LIBDIR}/myfile.cal
-${CUSTOMLIBDIR}/myfile
-${CUSTOMLIBDIR}/myfile.cal
+${CUSTOMCALDIR}/myfile
+${CUSTOMCALDIR}/myfile.cal
 .fi
 .in -5n
 .sp 1
@@ -566,32 +688,30 @@ help config
 .br
 SHELL SCRIPT MODE
 .PP
-If first line of an executable file begins
+If the first line of an executable file begins
 .B #!
 followed by the absolute pathname of the
 .B calc
 program and the flag
-.B \-S
+.B \-f
 as in:
 .sp 1
 .in +5n
 .nf
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ [other_flags\ \&...]
+\fI#!${BINDIR}/calc\fP\ [other_flags\ \&...] \fB\-f\fP
 .fi
 .in -5n
 .sp 1
 the rest of the file will be processed in
 .BR "shell script mode" .
 Note that
-.B \-S
-(UPPER CASE
-.BR \-S )
-must be the first \-flag on the ``#!'' line.
+.B \-f
+must at the end of the intiial ``#!'' line.
 Any other optional
 .B "other_flags"
-must come after
+must come before
 the
-.BR \-S .
+.BR \-f .
 .sp 1
 In
 .B "shell script mode"
@@ -607,8 +727,6 @@ the later lines within the script itself.
 In
 .BR "shell script mode" ,
 .B \-s
-(lower case
-.BR \-s )
 is always assumed.
 In addition,
 .B \-d
@@ -624,7 +742,7 @@ the file
 .sp 1
 .in +5n
 .nf
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ \&\fB\-q\fP
+\fI#!${BINDIR}/calc\fP\ \&\fB\-q\fP \fB\-f\fP
 #
 # mersenne - an example of a calc \fBshell script file\fP
 
@@ -838,7 +956,7 @@ ${LIBDIR}/bindings
 non-GNU-readline command line editor bindings
 .sp 1
 .TP 5
-${INCDIRCALC}/*.h
+${CALC_INCDIR}/*.h
 include files for C interface use
 .sp 1
 .TP 5
@@ -850,7 +968,7 @@ ${LIBDIR}/libcustcalc.a
 custom binary link library
 .sp 1
 .TP 5
-${CUSTOMLIBDIR}/*.cal
+${CUSTOMCALDIR}/*.cal
 custom resource files
 .sp 1
 .TP 5
@@ -993,25 +1111,58 @@ Copyright (C) 1999  Landon Curt Noll
 and is covered under version 2.1 GNU Lesser General
 Public License.
 .sp
-.SH "BUG REPORTS / BUG FIXES / ENHANCEMENTS"
+.SH "CALC MAILING LIST / CALC UPDATES / ENHANCEMENTS"
 \&
 .br
 .sp
-Send comments, suggestions, bug fixes, enhancements
+To contribute comments, suggestions, enhancements
 and interesting
 .B calc
-resource files,
-.B calc
-shell scripts that you would like you see included
-in future distributions to:
+resource files, and
+shell scripts please join the low volume calc mailing list.
+.sp
+To join the low volume calc mailing list, send EMail to:
 .sp
 .in +0.5i
 .nf
-calc-contrib at asthe dot com
+calc-tester-request at asthe dot com
 .fi
 .in -0.5i
 .sp
-Bug reports are sent to:
+Your subject must contain the words:
+.sp
+.in +0.5i
+.nf
+calc mailing list subscription
+.fi
+.in -0.5i
+.sp
+You may have additional words in your subject line.
+.sp
+Your message body must contain:
+.sp
+.in +0.5i
+.nf
+subscribe calc-tester address
+end
+name your_full_name
+.fi
+.in -0.5i
+.sp
+where
+.B address
+s your EMail address and
+.B your_full_name
+is your full name.
+Feel free to follow the
+.B name
+line with additional EMail text as desired.
+.sp
+.SH "BUG REPORTS / BUG FIXES"
+\&
+.br
+.sp
+Send bug reports and bug fixes to:
 .sp
 .in +0.5i
 .nf
@@ -1022,6 +1173,16 @@ calc-bugs at asthe dot com
 .fi
 .in -0.5i
 .sp
+Your subject must contain the words:
+.sp
+.in +0.5i
+.nf
+calc bug report
+.fi
+.in -0.5i
+.sp
+You may have additional words in your subject line.
+.sp
 See the
 .I BUGS
 source file or use the
@@ -1036,7 +1197,7 @@ help bugs
 .sp
 for more information about bug reporting.
 .sp
-.SH "CALC WEB SITE / MAILING LIST"
+.SH "CALC WEB SITE"
 \&
 .br
 Landon Noll maintains the the
@@ -1044,33 +1205,7 @@ Landon Noll maintains the the
 web site is located at:
 .sp
 .in +0.5i
-http://www.isthe.com/chongo/tech/comp/calc/
+www.isthe.com/chongo/tech/comp/calc/
 .in -0.5i
 .sp
-One may join the
-.B calc
-testing group by sending a request to:
-.sp
-.in +0.5i
-.nf
-calc-tester-request at asthe dot com
-
-[[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-[[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
-.fi
-.in -0.5i
-.sp
-Your message body (not the subject) should consist of:
-.sp
-.in +0.5i
-.nf
-subscribe calc-tester address
-end
-name your_full_name
-.fi
-.in -0.5i
-.sp
-where "address" is your EMail address and "your_full_name"
-is your full name.
-.sp
 Share and Enjoy! :\-)

calc.spec.in

@@ -0,0 +1,125 @@
+#****h* calc/calc.spec.in
+#
+# calc.spec.in - template specfile for calc
+#
+# Copyright (C) 2003-2005  Petteri Kettunen and Landon Curt Noll
+#
+# Calc is open software; you can redistribute it and/or modify it under
+# the terms of the version 2.1 of the GNU Lesser General Public License
+# as published by the Free Software Foundation.
+#
+# Calc is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+# Public License for more details.
+#
+# A copy of version 2.1 of the GNU Lesser General Public License is
+# distributed with calc under the filename COPYING-LGPL.  You should have
+# received a copy with calc; if not, write to Free Software Foundation, Inc.
+# 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+#
+# @(#) $Revision: 29.16 $
+# @(#) $Id: calc.spec.in,v 29.16 2006/06/26 05:50:44 chongo Exp $
+# @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.spec.in,v $
+#
+# Under source code control:	2003/02/16 20:21:39
+# File existed as early as:	2003
+#
+# calculator by David I. Bell with help/mods from others
+# Makefile by Petteri Kettunen with modifications from Landon Curt Noll
+
+# BUGS
+#  - Uninstalling calc and calc-devel leaves empty dirs /usr/include/calc
+#    and /usr/share/calc and its subdirs. In case e.g. %{_includedir}/calc
+#    is defined in `%files devel' section, then rpmbuild complains that
+#    header files are defined twice - rpmbuild bug or bug in specfile conf???
+
+Summary: Arbitrary precision calculator.
+Name: calc
+Version: <<<PROJECT_VERSION>>>
+Release: 0
+License: LGPL
+Group: Applications/Engineering
+Source: %{name}-%{version}.tar.gz
+URL: http://www.isthe.com/chongo/tech/comp/calc/index.html
+Requires: ncurses >= 5.2-26, readline >= 4.2, less >= 358
+BuildRequires: ncurses-devel >= 5.2-26, readline-devel >= 4.2
+BuildRoot: %{_tmppath}/%{name}-root
+
+%description
+Calc is arbitrary precision C-like arithmetic system that is a
+calculator, an algorithm prototype and mathematical research
+tool. Calc comes with a rich set of builtin mathematical and
+programmatic functions.
+
+For the latest calc release, see the calc project home page:
+
+    http://www.isthe.com/chongo/tech/comp/calc/index.html
+
+%package devel
+Summary: Development files and documentation for calc.
+Group: Development/Libraries
+PreReq: %{name} = %{version}-%{release}
+
+%description devel
+This package contains the header files and static libraries for developing
+calc (arbitrary precision calculator).
+
+For the latest calc release, see the project home page:
+
+    http://www.isthe.com/chongo/tech/comp/calc/index.html
+
+%prep
+%setup -q
+
+%build
+make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 all chk
+
+%install
+rm -rf %{buildroot}
+mkdir -p %{buildroot}
+make T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 install
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-, root, root)
+%doc BUGS CHANGES COPYING COPYING-LGPL
+%{_bindir}/*
+%{_mandir}/man1/*
+%{_datadir}/%{name}/*/*
+%{_datadir}/%{name}/bindings
+%{_datadir}/%{name}/README
+%{_datadir}/%{name}/*.cal
+%{_datadir}/%{name}/*.line
+
+%files devel
+%defattr(-, root, root)
+%doc BUGS COPYING COPYING-LGPL LIBRARY
+%attr(644, root, root) %{_includedir}/calc/*
+%attr(644, root, root) %{_libdir}/*.a
+
+%changelog
+* Sun Jun 25 2006 Landon Curt Noll http://www.isthe.com/chongo
+- Changed Copyright to License as per new rpm v4.4 syntax
+* Sun May 20 2006 Landon Curt Noll http://www.isthe.com/chongo
+- Release of calc-2.12.0
+- Added *.line set files to the list of packaged files
+* Sun Dec 11 2005 Landon Curt Noll http://www.isthe.com/chongo
+- Release of calc-2.11.11
+- Fixed description in spec file
+* Wed Feb 26 2003 Landon Curt Noll http://www.isthe.com/chongo
+- Release of calc-2.11.7-2
+- Fixed attributes on include and lib calc-devel files
+- Added BUGS to calc-devel as well as calc
+* Tue Feb 25 2003 Landon Curt Noll http://www.isthe.com/chongo
+- Release of calc-2.11.7-1
+- Require ncurses, readline and less to install.
+- Require ncurses-devel and readline-devel to build.
+* Tue Feb 18 2003 Landon Curt Noll http://www.isthe.com/chongo
+- Misc changes to fit local directory setup
+* Sun Feb 16 2003 Petteri Kettunen <petterik@users.sourceforge.net>
+- initial RPM build
+
+#****

calcerr.tbl

@@ -1,7 +1,7 @@
 #
 # calcerr - error codes and messages
 #
-# Copyright (C) 1999  Ernest Bowen
+# Copyright (C) 1999-2006  Ernest Bowen
 #
 # Calc is open software; you can redistribute it and/or modify it under
 # the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.2 $
-# @(#) $Id: calcerr.tbl,v 29.2 2000/06/07 14:02:13 chongo Exp $
+# @(#) $Revision: 29.10 $
+# @(#) $Id: calcerr.tbl,v 29.10 2006/08/20 15:01:30 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/calcerr.tbl,v $
 #
 # Under source code control:	1996/05/23 17:38:44
@@ -108,8 +108,8 @@ E_FGETSTR1	Non-file first argument for fgetstr
 E_FGETSTR2	File not open for reading for fgetstr
 E_FGETLINE1	Non-file  argument for fgetline
 E_FGETLINE2	File not open for reading for fgetline
-E_FGETWORD1	Non-file argument for fgetword
-E_FGETWORD2	File not open for reading for fgetword
+E_FGETFIELD1	Non-file argument for fgetfield
+E_FGETFIELD2	File not open for reading for fgetfield
 E_REWIND1	Non-file argument for rewind
 E_FILES		Non-integer argument for files
 E_PRINTF1	Non-string fmt argument for fprint
@@ -164,7 +164,7 @@ E_RSEARCH3	Bad third argument for rsearch
 E_RSEARCH4	Bad fourth argument for rsearch
 E_RSEARCH5	Cannot find fsize or fpos for rsearch
 E_RSEARCH6	File not readable for rsearch
-E_FOPEN3	Too many open files
+E_MANYOPEN	Too many open files
 E_REWIND2	Attempt to rewind a file that is not open
 E_STRERROR1	Bad argument type for strerror
 E_STRERROR2	Index out of range for strerror
@@ -260,14 +260,14 @@ E_COPY13	No-copy-from source variable
 E_COPY14	No-copy-to destination variable
 E_COPY15	No-copy-from source named block
 E_COPY16	No-copy-to destination named block
-E_COPY17	No-relocation destination for copy
+E_COPY17	No-relocate destination for copy
 E_COPYF1	File not open for copy
 E_COPYF2	fseek or fsize failure for copy
 E_COPYF3	fwrite error for copy
 E_COPYF4	fread error for copy
 E_PROTECT1	Non-variable first argument for protect
-E_PROTECT2	Non-integer second argument for protect
-E_PROTECT3	Out-of-range second argument for protect
+E_PROTECT2	Bad second argument for protect
+E_PROTECT3	Bad third argument for protect
 E_MATFILL3	No-copy-to destination for matfill
 E_MATFILL4	No-assign-from source for matfill
 E_MATTRACE1	Non-matrix argument for mattrace
@@ -375,3 +375,77 @@ E_GD3		Infinite or too-large result for gd
 E_AGD3		Infinite or too-large result for agd
 E_POWER4	Too-large value for power
 E_ROOT4		Too-large value for root
+E_DGT1		Non-real first arg for digit
+E_DGT2		Non-integral second arg for digit
+E_DGT3		Bad third arg for digit
+E_PLCS1		Bad first argument for places
+E_PLCS2		Bad second argument for places
+E_DGTS1		Bad first argument for digits
+E_DGTS2		Bad second argument for digits
+E_ILOG		Bad first argument for ilog
+E_ILOGB		Bad second argument for ilog
+E_ILOG10	Bad argument for ilog10
+E_ILOG2		Bad argument for ilog2
+E_COMB1		Non-integer second arg for comb
+E_COMB2		Too-large second arg for comb
+E_CTLN		Bad argument for catalan
+E_BERN		Bad argument for bern
+E_EULER		Bad argument for euler
+E_SLEEP		Bad argument for sleep
+E_TTY		calc_tty failure
+E_ASSIGN1	No-copy-to destination for octet assign
+E_ASSIGN2	No-copy-from source for octet assign
+E_ASSIGN3	No-change destination for octet assign
+E_ASSIGN4	Non-variable destination for assign
+E_ASSIGN5	No-assign-to destination for assign
+E_ASSIGN6	No-assign-from source for assign
+E_ASSIGN7	No-change destination for assign
+E_ASSIGN8	No-type-change destination for assign
+E_ASSIGN9	No-error-value destination for assign
+E_SWAP1		No-copy argument for octet swap
+E_SWAP2		No-assign-to-or-from argument for swap
+E_SWAP3		Non-lvalue argument for swap
+E_QUOMOD1	Non-lvalue argument 3 or 4 for quomod
+E_QUOMOD2	Non-real-number arg 1 or 2 or bad arg 5 for quomod
+E_QUOMOD3	No-assign-to argument 3 or 4 for quomod
+E_PREINC1	No-copy-to or no-change argument for octet preinc
+E_PREINC2	Non-variable argument for preinc
+E_PREINC3	No-assign-to or no-change argument for preinc
+E_PREDEC1	No-copy-to or no-change argument for octet predec
+E_PREDEC2	Non-variable argument for predec
+E_PREDEC3	No-assign-to or no-change argument for predec
+E_POSTINC1	No-copy-to or no-change argument for octet postinc
+E_POSTINC2	Non-variable argument for postinc
+E_POSTINC3	No-assign-to or no-change argument for postinc
+E_POSTDEC1	No-copy-to or no-change argument for octet postdec
+E_POSTDEC2	Non-variable argument for postdec
+E_POSTDEC3	No-assign-to or no-change argument for postdec
+E_INIT1		Error-type structure for initialization
+E_INIT2		No-copy-to structure for initialization
+E_INIT3		Too many initializer values
+E_INIT4		Attempt to initialize freed named block
+E_INIT5		Bad structure type for initialization
+E_INIT6		No-assign-to element for initialization
+E_INIT7		No-change element for initialization
+E_INIT8		No-type-change element for initialization
+E_INIT9		No-error-value element for initialization
+E_INIT10	No-assign-or-copy-from source for initialization
+E_LIST1		No-relocate for list insert
+E_LIST2		No-relocate for list delete
+E_LIST3		No-relocate for list push
+E_LIST4		No-relocate for list append
+E_LIST5		No-relocate for list pop
+E_LIST6		No-relocate for list remove
+E_MODIFY1	Non-variable first argument for modify
+E_MODIFY2	Non-string second argument for modify
+E_MODIFY3	No-change first argument for modify
+E_MODIFY4	Undefined function for modify
+E_MODIFY5	Unacceptable type first argument for modify
+E_FPATHOPEN1	Non-string arguments for fpathopen
+E_FPATHOPEN2	Unrecognized mode for fpathopen
+E_LOG1		Bad epsilon argument for log
+E_LOG2		Non-numeric first argument for log
+E_FGETFILE1	Non-file argument for fgetfile
+E_FGETFILE2	File argument for fgetfile not open for reading
+E_FGETFILE3	Unable to set file position in fgetfile
+E_ESTR		Non-representable type for estr

check.awk

@@ -2,7 +2,7 @@
 #
 # check - check the regression output for problems
 #
-# Copyright (C) 1999  Landon Curt Noll
+# Copyright (C) 1999-2006  Landon Curt Noll
 #
 # Calc is open software; you can redistribute it and/or modify it under
 # the terms of the version 2.1 of the GNU Lesser General Public License
@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.2 $
-# @(#) $Id: check.awk,v 29.2 2000/06/07 14:02:13 chongo Exp $
+# @(#) $Revision: 29.4 $
+# @(#) $Id: check.awk,v 29.4 2006/08/20 16:16:31 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/check.awk,v $
 #
 # Under source code control:	1996/05/25 22:07:58
@@ -64,7 +64,7 @@ NF == 0 {
 	end_seen = 1;
 }
 
-$1 ~ /^[0-9]+:/ {
+$1 ~ /^[0-9]+:/ || $1 ~ /^[0-9]+-[0-9]*:/ || $1 ~ /^"))$/ {
 	if (error > 0) {
 		if (havebuf2) {
 			print buf2;

cmath.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: cmath.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.7 $
+ * @(#) $Id: cmath.h,v 29.7 2005/10/18 10:43:49 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/cmath.h,v $
  *
  * Under source code control:	1993/07/30 19:42:45
@@ -32,7 +32,11 @@
 #define __CMATH_H__
 
 
-#include "qmath.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "qmath.h"
+#else
+# include <calc/qmath.h>
+#endif
 
 
 /*
@@ -58,62 +62,65 @@ extern void cprintfr(COMPLEX *c);
 /*
  * Basic numeric routines.
  */
-extern COMPLEX *cadd(COMPLEX *c1, COMPLEX *c2);
-extern COMPLEX *csub(COMPLEX *c1, COMPLEX *c2);
-extern COMPLEX *cmul(COMPLEX *c1, COMPLEX *c2);
-extern COMPLEX *cdiv(COMPLEX *c1, COMPLEX *c2);
-extern COMPLEX *caddq(COMPLEX *c, NUMBER *q);
-extern COMPLEX *csubq(COMPLEX *c, NUMBER *q);
-extern COMPLEX *cmulq(COMPLEX *c, NUMBER *q);
-extern COMPLEX *cdivq(COMPLEX *c, NUMBER *q);
-extern COMPLEX *cscale(COMPLEX *c, long i);
-extern COMPLEX *cshift(COMPLEX *c, long i);
-extern COMPLEX *csquare(COMPLEX *c);
-extern COMPLEX *cconj(COMPLEX *c);
-extern COMPLEX *creal(COMPLEX *c);
-extern COMPLEX *cimag(COMPLEX *c);
-extern COMPLEX *cneg(COMPLEX *c);
-extern COMPLEX *cinv(COMPLEX *c);
-extern COMPLEX *cint(COMPLEX *c);
-extern COMPLEX *cfrac(COMPLEX *c);
-extern BOOL ccmp(COMPLEX *c1, COMPLEX *c2);
+
+extern COMPLEX *c_add(COMPLEX *c1, COMPLEX *c2);
+extern COMPLEX *c_sub(COMPLEX *c1, COMPLEX *c2);
+extern COMPLEX *c_mul(COMPLEX *c1, COMPLEX *c2);
+extern COMPLEX *c_div(COMPLEX *c1, COMPLEX *c2);
+extern COMPLEX *c_addq(COMPLEX *c, NUMBER *q);
+extern COMPLEX *c_subq(COMPLEX *c, NUMBER *q);
+extern COMPLEX *c_mulq(COMPLEX *c, NUMBER *q);
+extern COMPLEX *c_divq(COMPLEX *c, NUMBER *q);
+extern COMPLEX *c_scale(COMPLEX *c, long i);
+extern COMPLEX *c_shift(COMPLEX *c, long i);
+extern COMPLEX *c_square(COMPLEX *c);
+extern COMPLEX *c_conj(COMPLEX *c);
+extern COMPLEX *c_real(COMPLEX *c);
+extern COMPLEX *c_imag(COMPLEX *c);
+extern COMPLEX *c_neg(COMPLEX *c);
+extern COMPLEX *c_inv(COMPLEX *c);
+extern COMPLEX *c_int(COMPLEX *c);
+extern COMPLEX *c_frac(COMPLEX *c);
+extern BOOL c_cmp(COMPLEX *c1, COMPLEX *c2);
 
 
 /*
  * More complicated functions.
  */
-extern COMPLEX *cpowi(COMPLEX *c, NUMBER *q);
+extern COMPLEX *c_powi(COMPLEX *c, NUMBER *q);
+extern NUMBER *c_ilog(COMPLEX *c, ZVALUE base);
 
 
 /*
  * Transcendental routines.  These all take an epsilon argument to
  * specify how accurately these are to be calculated.
  */
-extern COMPLEX *cpower(COMPLEX *c1, COMPLEX *c2, NUMBER *epsilon);
-extern COMPLEX *csqrt(COMPLEX *c, NUMBER *epsilon, long R);
-extern COMPLEX *croot(COMPLEX *c, NUMBER *q, NUMBER *epsilon);
-extern COMPLEX *cexp(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cln(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *ccos(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *csin(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *ccosh(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *csinh(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cpolar(NUMBER *q1, NUMBER *q2, NUMBER *epsilon);
-extern COMPLEX *crel(COMPLEX *c1, COMPLEX *c2);
-extern COMPLEX *casin(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cacos(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *catan(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cacot(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *casec(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cacsc(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *casinh(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cacosh(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *catanh(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cacoth(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *casech(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cacsch(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cgd(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cagd(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_power(COMPLEX *c1, COMPLEX *c2, NUMBER *epsilon);
+extern COMPLEX *c_sqrt(COMPLEX *c, NUMBER *epsilon, long R);
+extern COMPLEX *c_root(COMPLEX *c, NUMBER *q, NUMBER *epsilon);
+extern COMPLEX *c_exp(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_ln(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_log(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_cos(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_sin(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_cosh(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_sinh(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_polar(NUMBER *q1, NUMBER *q2, NUMBER *epsilon);
+extern COMPLEX *c_rel(COMPLEX *c1, COMPLEX *c2);
+extern COMPLEX *c_asin(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_acos(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_atan(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_acot(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_asec(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_acsc(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_asinh(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_acosh(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_atanh(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_acoth(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_asech(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_acsch(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_gd(COMPLEX *c, NUMBER *epsilon);
+extern COMPLEX *c_agd(COMPLEX *c, NUMBER *epsilon);
 
 
 

comfunc.c

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: comfunc.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: comfunc.c,v 29.6 2006/05/20 08:43:55 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/comfunc.c,v $
  *
  * Under source code control:	1990/02/15 01:48:13
@@ -33,6 +33,16 @@
 #include "config.h"
 #include "cmath.h"
 
+/*
+ * cache the natural logarithm of 10
+ */
+static COMPLEX *cln_10 = NULL;
+static NUMBER *cln_10_epsilon = NULL;
+static NUMBER _q10_ = { { _tenval_, 1, 0 }, { _oneval_, 1, 0 }, 1, NULL };
+static NUMBER _q0_ = { { _zeroval_, 1, 0 }, { _oneval_, 1, 0 }, 1, NULL };
+COMPLEX _cten_ = { &_q10_, &_q0_, 1 };
+
+
 /*
  * Compute the result of raising a complex number to an integer power.
  *
@@ -41,7 +51,7 @@
  *	q		power to raise it to
  */
 COMPLEX *
-cpowi(COMPLEX *c, NUMBER *q)
+c_powi(COMPLEX *c, NUMBER *q)
 {
 	COMPLEX *tmp, *res;	/* temporary values */
 	long power;		/* power to raise to */
@@ -69,29 +79,29 @@ cpowi(COMPLEX *c, NUMBER *q)
 	 */
 	if (power <= 4) {
 		switch ((int) (power * sign)) {
-			case 0:
-				return clink(&_cone_);
-			case 1:
-				return clink(c);
-			case -1:
-				return cinv(c);
-			case 2:
-				return csquare(c);
-			case -2:
-				tmp = csquare(c);
-				res = cinv(tmp);
-				comfree(tmp);
-				return res;
-			case 3:
-				tmp = csquare(c);
-				res = cmul(c, tmp);
-				comfree(tmp);
-				return res;
-			case 4:
-				tmp = csquare(c);
-				res = csquare(tmp);
-				comfree(tmp);
-				return res;
+		case 0:
+			return clink(&_cone_);
+		case 1:
+			return clink(c);
+		case -1:
+			return c_inv(c);
+		case 2:
+			return c_square(c);
+		case -2:
+			tmp = c_square(c);
+			res = c_inv(tmp);
+			comfree(tmp);
+			return res;
+		case 3:
+			tmp = c_square(c);
+			res = c_mul(c, tmp);
+			comfree(tmp);
+			return res;
+		case 4:
+			tmp = c_square(c);
+			res = c_square(tmp);
+			comfree(tmp);
+			return res;
 		}
 	}
 	/*
@@ -102,26 +112,26 @@ cpowi(COMPLEX *c, NUMBER *q)
 	while ((bit & power) == 0)
 		bit >>= 1L;
 	bit >>= 1L;
-	res = csquare(c);
+	res = c_square(c);
 	if (bit & power) {
-		tmp = cmul(res, c);
+		tmp = c_mul(res, c);
 		comfree(res);
 		res = tmp;
 	}
 	bit >>= 1L;
 	while (bit) {
-		tmp = csquare(res);
+		tmp = c_square(res);
 		comfree(res);
 		res = tmp;
 		if (bit & power) {
-			tmp = cmul(res, c);
+			tmp = c_mul(res, c);
 			comfree(res);
 			res = tmp;
 		}
 		bit >>= 1L;
 	}
 	if (sign < 0) {
-		tmp = cinv(res);
+		tmp = c_inv(res);
 		comfree(res);
 		res = tmp;
 	}
@@ -134,7 +144,7 @@ cpowi(COMPLEX *c, NUMBER *q)
  * Type of rounding of each component specified by R as for qsqrt().
  */
 COMPLEX *
-csqrt(COMPLEX *c, NUMBER *epsilon, long R)
+c_sqrt(COMPLEX *c, NUMBER *epsilon, long R)
 {
 	COMPLEX *r;
 	NUMBER *es, *aes, *bes, *u, *v, qtemp;
@@ -363,7 +373,7 @@ csqrt(COMPLEX *c, NUMBER *epsilon, long R)
  * Each component of the result is within the specified error.
  */
 COMPLEX *
-croot(COMPLEX *c, NUMBER *q, NUMBER *epsilon)
+c_root(COMPLEX *c, NUMBER *q, NUMBER *epsilon)
 {
 	COMPLEX *r;
 	NUMBER *a2pb2, *root, *tmp1, *tmp2, *epsilon2;
@@ -376,7 +386,7 @@ croot(COMPLEX *c, NUMBER *q, NUMBER *epsilon)
 	if (cisone(c) || qisone(q))
 		return clink(c);
 	if (qistwo(q))
-		return csqrt(c, epsilon, 24L);
+		return c_sqrt(c, epsilon, 24L);
 	if (cisreal(c) && !qisneg(c->real)) {
 		tmp1 = qroot(c->real, q, epsilon);
 		if (tmp1 == NULL)
@@ -388,8 +398,8 @@ croot(COMPLEX *c, NUMBER *q, NUMBER *epsilon)
 	}
 	/*
 	 * Calculate the root using the formula:
-	 *	croot(a + bi, n) =
-	 *		cpolar(qroot(a^2 + b^2, 2 * n), qatan2(b, a) / n).
+	 *	c_root(a + bi, n) =
+	 *		c_polar(qroot(a^2 + b^2, 2 * n), qatan2(b, a) / n).
 	 */
 	n = qilog2(epsilon);
 	epsilon2 = qbitvalue(n - 4);
@@ -415,7 +425,7 @@ croot(COMPLEX *c, NUMBER *q, NUMBER *epsilon)
 	qfree(epsilon2);
 	tmp2 = qqdiv(tmp1, q);
 	qfree(tmp1);
-	r = cpolar(root, tmp2, epsilon);
+	r = c_polar(root, tmp2, epsilon);
 	qfree(root);
 	qfree(tmp2);
 	return r;
@@ -428,7 +438,7 @@ croot(COMPLEX *c, NUMBER *q, NUMBER *epsilon)
  *	exp(a + bi) = exp(a) * (cos(b) + i * sin(b)).
  */
 COMPLEX *
-cexp(COMPLEX *c, NUMBER *epsilon)
+c_exp(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *r;
 	NUMBER *sin, *cos, *tmp1, *tmp2, *epsilon1;
@@ -485,13 +495,13 @@ cexp(COMPLEX *c, NUMBER *epsilon)
  *	ln(a + bi) = ln(a^2 + b^2) / 2 + i * atan2(b, a).
  */
 COMPLEX *
-cln(COMPLEX *c, NUMBER *epsilon)
+c_ln(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *r;
 	NUMBER *a2b2, *tmp1, *tmp2, *epsilon1;
 
 	if (ciszero(c)) {
-		math_error("Logarithm of zero");
+		math_error("logarithm of zero");
 		/*NOTREACHED*/
 	}
 	if (cisone(c))
@@ -519,6 +529,60 @@ cln(COMPLEX *c, NUMBER *epsilon)
 	return r;
 }
 
+/*
+ * Calculate base 10 logarithm by:
+ *
+ *	log(c) = ln(c) / ln(10)
+ */
+COMPLEX *
+c_log(COMPLEX *c, NUMBER *epsilon)
+{
+	int need_new_cln_10 = TRUE;	/* FALSE => use cached cln_10 value */
+	COMPLEX *ln_c;			/* ln(x) */
+	COMPLEX *ret;			/* base 10 logarithm of x */
+
+	/*
+	 * compute ln(c) first
+	 */
+	ln_c = c_ln(c, epsilon);
+	/* log(1) == 0 */
+	if (ciszero(ln_c)) {
+		return ln_c;
+	}
+
+	/*
+	 * save epsilon for ln(10) if needed
+	 */
+	if (cln_10_epsilon == NULL) {
+		/* first time call */
+		cln_10_epsilon = qcopy(epsilon);
+	} else if (qcmp(cln_10_epsilon, epsilon) == FALSE) {
+		/* replaced cacheed value with epsilon arg */
+		qfree(cln_10_epsilon);
+		cln_10_epsilon = qcopy(epsilon);
+	} else if (cln_10 != NULL) {
+		/* the previously computed ln(2) is OK to use */
+		need_new_cln_10 = FALSE;
+	}
+
+	/*
+	 * compute ln(10) if needed
+	 */
+	if (need_new_cln_10 == TRUE) {
+		if (cln_10 != NULL) {
+			comfree(cln_10);
+		}
+		cln_10 = c_ln(&_cten_, cln_10_epsilon);
+	}
+
+	/*
+	 * return ln(c) / ln(10)
+	 */
+	ret = c_div(ln_c, cln_10);
+	comfree(ln_c);
+	return ret;
+}
+
 
 /*
  * Calculate the complex cosine within the specified accuracy.
@@ -526,7 +590,7 @@ cln(COMPLEX *c, NUMBER *epsilon)
  *	cos(x) = (exp(1i * x) + exp(-1i * x))/2;
  */
 COMPLEX *
-ccos(COMPLEX *c, NUMBER *epsilon)
+c_cos(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *r, *ctmp1, *ctmp2, *ctmp3;
 	NUMBER *epsilon1;
@@ -545,7 +609,7 @@ ccos(COMPLEX *c, NUMBER *epsilon)
 	ctmp1->real = neg ? qneg(c->imag) : qlink(c->imag);
 	ctmp1->imag = neg ? qlink(c->real) : qneg(c->real);
 	epsilon1 = qbitvalue(n - 2);
-	ctmp2 = cexp(ctmp1, epsilon1);
+	ctmp2 = c_exp(ctmp1, epsilon1);
 	comfree(ctmp1);
 	qfree(epsilon1);
 	if (ctmp2 == NULL)
@@ -554,11 +618,11 @@ ccos(COMPLEX *c, NUMBER *epsilon)
 		comfree(ctmp2);
 		return clink(&_czero_);
 	}
-	ctmp1 = cinv(ctmp2);
-	ctmp3 = cadd(ctmp2, ctmp1);
+	ctmp1 = c_inv(ctmp2);
+	ctmp3 = c_add(ctmp2, ctmp1);
 	comfree(ctmp1);
 	comfree(ctmp2);
-	ctmp1 = cscale(ctmp3, -1);
+	ctmp1 = c_scale(ctmp3, -1);
 	comfree(ctmp3);
 	r = comalloc();
 	qfree(r->real);
@@ -576,7 +640,7 @@ ccos(COMPLEX *c, NUMBER *epsilon)
  *	sin(x) = (exp(1i * x) - exp(-i1*x))/(2i).
  */
 COMPLEX *
-csin(COMPLEX *c, NUMBER *epsilon)
+c_sin(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *r, *ctmp1, *ctmp2, *ctmp3;
 	NUMBER *qtmp, *epsilon1;
@@ -597,7 +661,7 @@ csin(COMPLEX *c, NUMBER *epsilon)
 	ctmp1->real = neg ? qneg(c->imag) : qlink(c->imag);
 	ctmp1->imag = neg ? qlink(c->real) : qneg(c->real);
 	epsilon1 = qbitvalue(n - 2);
-	ctmp2 = cexp(ctmp1, epsilon1);
+	ctmp2 = c_exp(ctmp1, epsilon1);
 	comfree(ctmp1);
 	qfree(epsilon1);
 	if (ctmp2 == NULL)
@@ -606,11 +670,11 @@ csin(COMPLEX *c, NUMBER *epsilon)
 		comfree(ctmp2);
 		return clink(&_czero_);
 	}
-	ctmp1 = cinv(ctmp2);
-	ctmp3 = csub(ctmp2, ctmp1);
+	ctmp1 = c_inv(ctmp2);
+	ctmp3 = c_sub(ctmp2, ctmp1);
 	comfree(ctmp1);
 	comfree(ctmp2);
-	ctmp1 = cscale(ctmp3, -1);
+	ctmp1 = c_scale(ctmp3, -1);
 	comfree(ctmp3);
 	r = comalloc();
 	qtmp = neg ? qlink(ctmp1->imag) : qneg(ctmp1->imag);
@@ -627,105 +691,105 @@ csin(COMPLEX *c, NUMBER *epsilon)
 
 
 COMPLEX *
-ccosh(COMPLEX *c, NUMBER *epsilon)
+c_cosh(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 
-	tmp1 = cexp(c, epsilon);
+	tmp1 = c_exp(c, epsilon);
 	if (tmp1 == NULL)
 		return NULL;
-	tmp2 = cneg(c);
-	tmp3 = cexp(tmp2, epsilon);
+	tmp2 = c_neg(c);
+	tmp3 = c_exp(tmp2, epsilon);
 	comfree(tmp2);
 	if (tmp3 == NULL)
 		return NULL;
-	tmp2 = cadd(tmp1, tmp3);
+	tmp2 = c_add(tmp1, tmp3);
 	comfree(tmp1);
 	comfree(tmp3);
-	tmp1 = cscale(tmp2, -1);
+	tmp1 = c_scale(tmp2, -1);
 	comfree(tmp2);
 	return tmp1;
 }
 
 
 COMPLEX *
-csinh(COMPLEX *c, NUMBER *epsilon)
+c_sinh(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 
-	tmp1 = cexp(c, epsilon);
+	tmp1 = c_exp(c, epsilon);
 	if (tmp1 == NULL)
 		return NULL;
-	tmp2 = cneg(c);
-	tmp3 = cexp(tmp2, epsilon);
+	tmp2 = c_neg(c);
+	tmp3 = c_exp(tmp2, epsilon);
 	comfree(tmp2);
 	if (tmp3 == NULL)
 		return NULL;
-	tmp2 = csub(tmp1, tmp3);
+	tmp2 = c_sub(tmp1, tmp3);
 	comfree(tmp1);
 	comfree(tmp3);
-	tmp1 = cscale(tmp2, -1);
+	tmp1 = c_scale(tmp2, -1);
 	comfree(tmp2);
 	return tmp1;
 }
 
 
 COMPLEX *
-casin(COMPLEX *c, NUMBER *epsilon)
+c_asin(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = cmul(&_conei_, c);
-	tmp2 = casinh(tmp1, epsilon);
+	tmp1 = c_mul(&_conei_, c);
+	tmp2 = c_asinh(tmp1, epsilon);
 	comfree(tmp1);
-	tmp1 = cdiv(tmp2, &_conei_);
+	tmp1 = c_div(tmp2, &_conei_);
 	comfree(tmp2);
 	return tmp1;
 }
 
 
 COMPLEX *
-cacos(COMPLEX *c, NUMBER *epsilon)
+c_acos(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = csquare(c);
-	tmp2 = csub(&_cone_, tmp1);
+	tmp1 = c_square(c);
+	tmp2 = c_sub(&_cone_, tmp1);
 	comfree(tmp1);
-	tmp1 = csqrt(tmp2, epsilon, 24);
+	tmp1 = c_sqrt(tmp2, epsilon, 24);
 	comfree(tmp2);
-	tmp2 = cmul(&_conei_, tmp1);
+	tmp2 = c_mul(&_conei_, tmp1);
 	comfree(tmp1);
-	tmp1 = cadd(c, tmp2);
+	tmp1 = c_add(c, tmp2);
 	comfree(tmp2);
-	tmp2 = cln(tmp1, epsilon);
+	tmp2 = c_ln(tmp1, epsilon);
 	comfree(tmp1);
-	tmp1 = cdiv(tmp2, &_conei_);
+	tmp1 = c_div(tmp2, &_conei_);
 	comfree(tmp2);
 	return tmp1;
 }
 
 
 COMPLEX *
-casinh(COMPLEX *c, NUMBER *epsilon)
+c_asinh(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 	BOOL neg;
 
 	neg = qisneg(c->real);
-	tmp1 = neg ? cneg(c) : clink(c);
-	tmp2 = csquare(tmp1);
-	tmp3 = cadd(&_cone_, tmp2);
+	tmp1 = neg ? c_neg(c) : clink(c);
+	tmp2 = c_square(tmp1);
+	tmp3 = c_add(&_cone_, tmp2);
 	comfree(tmp2);
-	tmp2 = csqrt(tmp3, epsilon, 24);
+	tmp2 = c_sqrt(tmp3, epsilon, 24);
 	comfree(tmp3);
-	tmp3 = cadd(tmp2, tmp1);
+	tmp3 = c_add(tmp2, tmp1);
 	comfree(tmp1);
 	comfree(tmp2);
-	tmp1 = cln(tmp3, epsilon);
+	tmp1 = c_ln(tmp3, epsilon);
 	comfree(tmp3);
 	if (neg) {
-		tmp2 = cneg(tmp1);
+		tmp2 = c_neg(tmp1);
 		comfree(tmp1);
 		return tmp2;
 	}
@@ -734,153 +798,153 @@ casinh(COMPLEX *c, NUMBER *epsilon)
 
 
 COMPLEX *
-cacosh(COMPLEX *c, NUMBER *epsilon)
+c_acosh(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = csquare(c);
-	tmp2 = csub(tmp1, &_cone_);
+	tmp1 = c_square(c);
+	tmp2 = c_sub(tmp1, &_cone_);
 	comfree(tmp1);
-	tmp1 = csqrt(tmp2, epsilon, 24);
+	tmp1 = c_sqrt(tmp2, epsilon, 24);
 	comfree(tmp2);
-	tmp2 = cadd(c, tmp1);
+	tmp2 = c_add(c, tmp1);
 	comfree(tmp1);
-	tmp1 = cln(tmp2, epsilon);
+	tmp1 = c_ln(tmp2, epsilon);
 	comfree(tmp2);
 	return tmp1;
 }
 
 
 COMPLEX *
-catan(COMPLEX *c, NUMBER *epsilon)
+c_atan(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 
 	if (qiszero(c->real) && qisunit(c->imag))
 		return NULL;
-	tmp1 = csub(&_conei_, c);
-	tmp2 = cadd(&_conei_, c);
-	tmp3 = cdiv(tmp1, tmp2);
+	tmp1 = c_sub(&_conei_, c);
+	tmp2 = c_add(&_conei_, c);
+	tmp3 = c_div(tmp1, tmp2);
 	comfree(tmp1);
 	comfree(tmp2);
-	tmp1 = cln(tmp3, epsilon);
+	tmp1 = c_ln(tmp3, epsilon);
 	comfree(tmp3);
-	tmp2 = cscale(tmp1, -1);
+	tmp2 = c_scale(tmp1, -1);
 	comfree(tmp1);
-	tmp1 = cdiv(tmp2, &_conei_);
+	tmp1 = c_div(tmp2, &_conei_);
 	comfree(tmp2);
 	return tmp1;
 }
 
 
 COMPLEX *
-cacot(COMPLEX *c, NUMBER *epsilon)
+c_acot(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 
 	if (qiszero(c->real) && qisunit(c->imag))
 		return NULL;
-	tmp1 = cadd(c, &_conei_);
-	tmp2 = csub(c, &_conei_);
-	tmp3 = cdiv(tmp1, tmp2);
+	tmp1 = c_add(c, &_conei_);
+	tmp2 = c_sub(c, &_conei_);
+	tmp3 = c_div(tmp1, tmp2);
 	comfree(tmp1);
 	comfree(tmp2);
-	tmp1 = cln(tmp3, epsilon);
+	tmp1 = c_ln(tmp3, epsilon);
 	comfree(tmp3);
-	tmp2 = cscale(tmp1, -1);
+	tmp2 = c_scale(tmp1, -1);
 	comfree(tmp1);
-	tmp1 = cdiv(tmp2, &_conei_);
+	tmp1 = c_div(tmp2, &_conei_);
 	comfree(tmp2);
 	return tmp1;
 }
 
 COMPLEX *
-casec(COMPLEX *c, NUMBER *epsilon)
+c_asec(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = cinv(c);
-	tmp2 = cacos(tmp1, epsilon);
+	tmp1 = c_inv(c);
+	tmp2 = c_acos(tmp1, epsilon);
 	comfree(tmp1);
 	return tmp2;
 }
 
 COMPLEX *
-cacsc(COMPLEX *c, NUMBER *epsilon)
+c_acsc(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = cinv(c);
-	tmp2 = casin(tmp1, epsilon);
+	tmp1 = c_inv(c);
+	tmp2 = c_asin(tmp1, epsilon);
 	comfree(tmp1);
 	return tmp2;
 }
 
 
 COMPLEX *
-catanh(COMPLEX *c, NUMBER *epsilon)
+c_atanh(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 
 	if (qiszero(c->imag) && qisunit(c->real))
 		return NULL;
-	tmp1 = cadd(&_cone_, c);
-	tmp2 = csub(&_cone_, c);
-	tmp3 = cdiv(tmp1, tmp2);
+	tmp1 = c_add(&_cone_, c);
+	tmp2 = c_sub(&_cone_, c);
+	tmp3 = c_div(tmp1, tmp2);
 	comfree(tmp1);
 	comfree(tmp2);
-	tmp1 = cln(tmp3, epsilon);
+	tmp1 = c_ln(tmp3, epsilon);
 	comfree(tmp3);
-	tmp2 = cscale(tmp1, -1);
+	tmp2 = c_scale(tmp1, -1);
 	comfree(tmp1);
 	return tmp2;
 }
 
 
 COMPLEX *
-cacoth(COMPLEX *c, NUMBER *epsilon)
+c_acoth(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 
 	if (qiszero(c->imag) && qisunit(c->real))
 		return NULL;
-	tmp1 = cadd(c, &_cone_);
-	tmp2 = csub(c, &_cone_);
-	tmp3 = cdiv(tmp1, tmp2);
+	tmp1 = c_add(c, &_cone_);
+	tmp2 = c_sub(c, &_cone_);
+	tmp3 = c_div(tmp1, tmp2);
 	comfree(tmp1);
 	comfree(tmp2);
-	tmp1 = cln(tmp3, epsilon);
+	tmp1 = c_ln(tmp3, epsilon);
 	comfree(tmp3);
-	tmp2 = cscale(tmp1, -1);
+	tmp2 = c_scale(tmp1, -1);
 	comfree(tmp1);
 	return tmp2;
 }
 
 COMPLEX *
-casech(COMPLEX *c, NUMBER *epsilon)
+c_asech(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = cinv(c);
-	tmp2 = cacosh(tmp1, epsilon);
+	tmp1 = c_inv(c);
+	tmp2 = c_acosh(tmp1, epsilon);
 	comfree(tmp1);
 	return tmp2;
 }
 
 COMPLEX *
-cacsch(COMPLEX *c, NUMBER *epsilon)
+c_acsch(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = cinv(c);
-	tmp2 = casinh(tmp1, epsilon);
+	tmp1 = c_inv(c);
+	tmp2 = c_asinh(tmp1, epsilon);
 	comfree(tmp1);
 	return tmp2;
 }
 
 
 COMPLEX *
-cgd(COMPLEX *c, NUMBER *epsilon)
+c_gd(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 	NUMBER *q1, *q2;
@@ -947,30 +1011,30 @@ cgd(COMPLEX *c, NUMBER *epsilon)
 		return tmp1;
 	}
 	neg = qisneg(c->real);
-	tmp1 = neg ? cneg(c) : clink(c);
-	tmp2 = cexp(tmp1, epsilon);
+	tmp1 = neg ? c_neg(c) : clink(c);
+	tmp2 = c_exp(tmp1, epsilon);
 	comfree(tmp1);
 	if (tmp2 == NULL)
 		return NULL;
-	tmp1 = cmul(&_conei_, tmp2);
-	tmp3 = cadd(&_conei_, tmp2);
+	tmp1 = c_mul(&_conei_, tmp2);
+	tmp3 = c_add(&_conei_, tmp2);
 	comfree(tmp2);
-	tmp2 = cadd(tmp1, &_cone_);
+	tmp2 = c_add(tmp1, &_cone_);
 	comfree(tmp1);
 	if (ciszero(tmp2) || ciszero(tmp3)) {
 		comfree(tmp2);
 		comfree(tmp3);
 		return NULL;
 	}
-	tmp1 = cdiv(tmp2, tmp3);
+	tmp1 = c_div(tmp2, tmp3);
 	comfree(tmp2);
 	comfree(tmp3);
-	tmp2 = cln(tmp1, epsilon);
+	tmp2 = c_ln(tmp1, epsilon);
 	comfree(tmp1);
-	tmp1 = cdiv(tmp2, &_conei_);
+	tmp1 = c_div(tmp2, &_conei_);
 	comfree(tmp2);
 	if (neg) {
-		tmp2 = cneg(tmp1);
+		tmp2 = c_neg(tmp1);
 		comfree(tmp1);
 		return tmp2;
 	}
@@ -979,16 +1043,16 @@ cgd(COMPLEX *c, NUMBER *epsilon)
 
 
 COMPLEX *
-cagd(COMPLEX *c, NUMBER *epsilon)
+c_agd(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = cmul(&_conei_, c);
-	tmp2 = cgd(tmp1, epsilon);
+	tmp1 = c_mul(&_conei_, c);
+	tmp2 = c_gd(tmp1, epsilon);
 	comfree(tmp1);
 	if (tmp2 == NULL)
 		return NULL;
-	tmp1 = cdiv(tmp2, &_conei_);
+	tmp1 = c_div(tmp2, &_conei_);
 	comfree(tmp2);
 	return tmp1;
 }
@@ -1000,14 +1064,14 @@ cagd(COMPLEX *c, NUMBER *epsilon)
  *	q1 * cos(q2) + q1 * sin(q2) * i.
  */
 COMPLEX *
-cpolar(NUMBER *q1, NUMBER *q2, NUMBER *epsilon)
+c_polar(NUMBER *q1, NUMBER *q2, NUMBER *epsilon)
 {
 	COMPLEX *r;
 	NUMBER *tmp, *cos, *sin;
 	long m, n;
 
 	if (qiszero(epsilon)) {
-		math_error("Zero epsilson for cpolar");
+		math_error("Zero epsilon for cpolar");
 		/*NOTREACHED*/
 	}
 	if (qiszero(q1))
@@ -1042,7 +1106,7 @@ cpolar(NUMBER *q1, NUMBER *q2, NUMBER *epsilon)
  * specified error.
  */
 COMPLEX *
-cpower(COMPLEX *c1, COMPLEX *c2, NUMBER *epsilon)
+c_power(COMPLEX *c1, COMPLEX *c2, NUMBER *epsilon)
 {
 	COMPLEX *ctmp1, *ctmp2;
 	long k1, k2, k, m1, m2, m, n;
@@ -1099,11 +1163,11 @@ cpower(COMPLEX *c1, COMPLEX *c2, NUMBER *epsilon)
 	if (k < n)
 		return clink(&_czero_);
 	epsilon1 = qbitvalue(n - k - m - 2);
-	ctmp1 = cln(c1, epsilon1);
+	ctmp1 = c_ln(c1, epsilon1);
 	qfree(epsilon1);
-	ctmp2 = cmul(ctmp1, c2);
+	ctmp2 = c_mul(ctmp1, c2);
 	comfree(ctmp1);
-	ctmp1 = cexp(ctmp2, epsilon);
+	ctmp1 = c_exp(ctmp2, epsilon);
 	comfree(ctmp2);
 	return ctmp1;
 }
@@ -1162,3 +1226,27 @@ cprintfr(COMPLEX *c)
 		zprintval(i->den, 0L, 0L);
 	}
 }
+
+
+NUMBER *
+c_ilog(COMPLEX *c, ZVALUE base)
+{
+	NUMBER *qr, *qi;
+
+	qr = qilog(c->real, base);
+	qi = qilog(c->imag, base);
+
+	if (qr == NULL) {
+		if (qi == NULL)
+			return NULL;
+		return qi;
+	}
+	if (qi == NULL)
+		return qr;
+	if (qrel(qr, qi) >= 0) {
+		qfree(qi);
+		return qr;
+	}
+	qfree(qr);
+	return qi;
+}

commath.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: commath.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: commath.c,v 29.4 2005/10/18 10:43:49 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/commath.c,v $
  *
  * Under source code control:	1990/02/15 01:48:10
@@ -42,7 +42,7 @@ static COMPLEX _cnegone_ =	{ &_qnegone_, &_qzero_, 1 };
  * Add two complex numbers.
  */
 COMPLEX *
-cadd(COMPLEX *c1, COMPLEX *c2)
+c_add(COMPLEX *c1, COMPLEX *c2)
 {
 	COMPLEX *r;
 
@@ -67,7 +67,7 @@ cadd(COMPLEX *c1, COMPLEX *c2)
  * Subtract two complex numbers.
  */
 COMPLEX *
-csub(COMPLEX *c1, COMPLEX *c2)
+c_sub(COMPLEX *c1, COMPLEX *c2)
 {
 	COMPLEX *r;
 
@@ -98,7 +98,7 @@ csub(COMPLEX *c1, COMPLEX *c2)
  * Then (a+bi) * (c+di) = (q2 - q3) + (q1 - q2 - q3)i.
  */
 COMPLEX *
-cmul(COMPLEX *c1, COMPLEX *c2)
+c_mul(COMPLEX *c1, COMPLEX *c2)
 {
 	COMPLEX *r;
 	NUMBER *q1, *q2, *q3, *q4;
@@ -110,9 +110,9 @@ cmul(COMPLEX *c1, COMPLEX *c2)
 	if (cisone(c2))
 		return clink(c1);
 	if (cisreal(c2))
-		return cmulq(c1, c2->real);
+		return c_mulq(c1, c2->real);
 	if (cisreal(c1))
-		return cmulq(c2, c1->real);
+		return c_mulq(c2, c1->real);
 	/*
 	 * Need to do the full calculation.
 	 */
@@ -141,7 +141,7 @@ cmul(COMPLEX *c1, COMPLEX *c2)
  * Square a complex number.
  */
 COMPLEX *
-csquare(COMPLEX *c)
+c_square(COMPLEX *c)
 {
 	COMPLEX *r;
 	NUMBER *q1, *q2;
@@ -183,7 +183,7 @@ csquare(COMPLEX *c)
  * Divide two complex numbers.
  */
 COMPLEX *
-cdiv(COMPLEX *c1, COMPLEX *c2)
+c_div(COMPLEX *c1, COMPLEX *c2)
 {
 	COMPLEX *r;
 	NUMBER *q1, *q2, *q3, *den;
@@ -254,7 +254,7 @@ cdiv(COMPLEX *c1, COMPLEX *c2)
  * Invert a complex number.
  */
 COMPLEX *
-cinv(COMPLEX *c)
+c_inv(COMPLEX *c)
 {
 	COMPLEX *r;
 	NUMBER *q1, *q2, *den;
@@ -296,7 +296,7 @@ cinv(COMPLEX *c)
  * Negate a complex number.
  */
 COMPLEX *
-cneg(COMPLEX *c)
+c_neg(COMPLEX *c)
 {
 	COMPLEX *r;
 
@@ -320,7 +320,7 @@ cneg(COMPLEX *c)
  * This means take the integer part of both components.
  */
 COMPLEX *
-cint(COMPLEX *c)
+c_int(COMPLEX *c)
 {
 	COMPLEX *r;
 
@@ -340,7 +340,7 @@ cint(COMPLEX *c)
  * This means take the fractional part of both components.
  */
 COMPLEX *
-cfrac(COMPLEX *c)
+c_frac(COMPLEX *c)
 {
 	COMPLEX *r;
 
@@ -360,7 +360,7 @@ cfrac(COMPLEX *c)
  * This negates the complex part.
  */
 COMPLEX *
-cconj(COMPLEX *c)
+c_conj(COMPLEX *c)
 {
 	COMPLEX *r;
 
@@ -381,7 +381,7 @@ cconj(COMPLEX *c)
  * Return the real part of a complex number.
  */
 COMPLEX *
-creal(COMPLEX *c)
+c_real(COMPLEX *c)
 {
 	COMPLEX *r;
 
@@ -400,7 +400,7 @@ creal(COMPLEX *c)
  * Return the imaginary part of a complex number as a real.
  */
 COMPLEX *
-cimag(COMPLEX *c)
+c_imag(COMPLEX *c)
 {
 	COMPLEX *r;
 
@@ -417,7 +417,7 @@ cimag(COMPLEX *c)
  * Add a real number to a complex number.
  */
 COMPLEX *
-caddq(COMPLEX *c, NUMBER *q)
+c_addq(COMPLEX *c, NUMBER *q)
 {
 	COMPLEX *r;
 
@@ -436,7 +436,7 @@ caddq(COMPLEX *c, NUMBER *q)
  * Subtract a real number from a complex number.
  */
 COMPLEX *
-csubq(COMPLEX *c, NUMBER *q)
+c_subq(COMPLEX *c, NUMBER *q)
 {
 	COMPLEX *r;
 
@@ -456,7 +456,7 @@ csubq(COMPLEX *c, NUMBER *q)
  * number of bits.  Negative values shift to the right.
  */
 COMPLEX *
-cshift(COMPLEX *c, long n)
+c_shift(COMPLEX *c, long n)
 {
 	COMPLEX *r;
 
@@ -475,7 +475,7 @@ cshift(COMPLEX *c, long n)
  * Scale a complex number by a power of two.
  */
 COMPLEX *
-cscale(COMPLEX *c, long n)
+c_scale(COMPLEX *c, long n)
 {
 	COMPLEX *r;
 
@@ -494,7 +494,7 @@ cscale(COMPLEX *c, long n)
  * Multiply a complex number by a real number.
  */
 COMPLEX *
-cmulq(COMPLEX *c, NUMBER *q)
+c_mulq(COMPLEX *c, NUMBER *q)
 {
 	COMPLEX *r;
 
@@ -503,7 +503,7 @@ cmulq(COMPLEX *c, NUMBER *q)
 	if (qisone(q))
 		return clink(c);
 	if (qisnegone(q))
-		return cneg(c);
+		return c_neg(c);
 	r = comalloc();
 	qfree(r->real);
 	qfree(r->imag);
@@ -517,7 +517,7 @@ cmulq(COMPLEX *c, NUMBER *q)
  * Divide a complex number by a real number.
  */
 COMPLEX *
-cdivq(COMPLEX *c, NUMBER *q)
+c_divq(COMPLEX *c, NUMBER *q)
 {
 	COMPLEX *r;
 
@@ -528,7 +528,7 @@ cdivq(COMPLEX *c, NUMBER *q)
 	if (qisone(q))
 		return clink(c);
 	if (qisnegone(q))
-		return cneg(c);
+		return c_neg(c);
 	r = comalloc();
 	qfree(r->real);
 	qfree(r->imag);
@@ -564,7 +564,7 @@ qqtoc(NUMBER *q1, NUMBER *q2)
  * and TRUE if they differ.
  */
 BOOL
-ccmp(COMPLEX *c1, COMPLEX *c2)
+c_cmp(COMPLEX *c1, COMPLEX *c2)
 {
 	BOOL i;
 
@@ -581,7 +581,7 @@ ccmp(COMPLEX *c1, COMPLEX *c2)
  * imaginary parts of the two numbers.
  */
 COMPLEX *
-crel(COMPLEX *c1, COMPLEX *c2)
+c_rel(COMPLEX *c1, COMPLEX *c2)
 {
 	COMPLEX *c;
 

config.c

@@ -1,7 +1,7 @@
 /*
  * config - configuration routines
  *
- * Copyright (C) 1999  David I. Bell and Landon Curt Noll
+ * Copyright (C) 1999-2006  David I. Bell and Landon Curt Noll
  *
  * Primary author:  David I. Bell
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: config.c,v 29.3 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.22 $
+ * @(#) $Id: config.c,v 29.22 2006/06/25 22:05:38 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/config.c,v $
  *
  * Under source code control:	1991/07/20 00:21:56
@@ -38,6 +38,7 @@
 #include "nametype.h"
 #include "config.h"
 #include "string.h"
+#include "custom.h"
 
 #include "have_strdup.h"
 #if !defined(HAVE_STRDUP)
@@ -51,6 +52,7 @@
 NAMETYPE configs[] = {
 	{"all",		CONFIG_ALL},
 	{"mode",	CONFIG_MODE},
+	{"mode2",	CONFIG_MODE2},
 	{"display",	CONFIG_DISPLAY},
 	{"epsilon",	CONFIG_EPSILON},
 	/*epsilonprec -- tied to epsilon not a configuration type*/
@@ -90,7 +92,14 @@ NAMETYPE configs[] = {
 	    {"ctrl-d",	CONFIG_CTRL_D},		/* alias for ctrl_d */
 	{"program",	CONFIG_PROGRAM},
 	{"basename",	CONFIG_BASENAME},
+	{"windows",	CONFIG_WINDOWS},
+	{"cygwin",	CONFIG_CYGWIN},
+	{"compile_custom",	CONFIG_COMPILE_CUSTOM},
+	{"allow_custom",	CONFIG_ALLOW_CUSTOM},
 	{"version",	CONFIG_VERSION},
+	{"baseb",	CONFIG_BASEB},
+	{"redecl_warn",	CONFIG_REDECL_WARN},
+	{"dupvar_warn",	CONFIG_DUPVAR_WARN},
 	{NULL,		0}
 };
 
@@ -100,6 +109,7 @@ NAMETYPE configs[] = {
  */
 CONFIG oldstd = {	/* backward compatible standard configuration */
 	MODE_INITIAL,		/* current output mode */
+	MODE2_INITIAL,		/* current secondary output mode */
 	20,			/* current output digits for float or exp */
 	NULL,	/* loaded in at startup - default error for real functions */
 	EPSILONPREC_DEFAULT,	/* binary precision of epsilon */
@@ -109,10 +119,10 @@ CONFIG oldstd = {	/* backward compatible standard configuration */
 	SQ_ALG2,		/* size of number to use square alg 2 */
 	POW_ALG2,		/* size of modulus to use REDC for powers */
 	REDC_ALG2,		/* size of modulus to use REDC algorithm 2 */
-	TRUE,			/* ok to print a tilde on aproximations */
+	TRUE,			/* ok to print a tilde on approximations */
 	TRUE,			/* ok to print tab before numeric values */
 	0,			/* quomod() default rounding mode */
-	2,			/* quotent // default rounding mode */
+	2,			/* quotient // default rounding mode */
 	0,			/* mod % default rounding mode */
 	24,			/* sqrt() default rounding mode */
 	24,			/* appr() default rounding mode */
@@ -132,27 +142,47 @@ CONFIG oldstd = {	/* backward compatible standard configuration */
 	0,			/* internal calc debug level */
 	3,			/* calc resource file debug level */
 	0,			/* user defined debug level */
-	TRUE,			/* print Quit or abort executed messages */
+	FALSE,			/* print Quit or abort executed messages */
 	CTRL_D_VIRGIN_EOF,	/* ^D only exits on virgin lines */
 	NULL,			/* our name */
 	NULL,			/* basename of our name */
-	NULL			/* version */
+#if defined(_WIN32)
+	TRUE,			/* running under windows */
+#else
+	FALSE,			/* congrats, you are not using windows */
+#endif
+#if defined(__CYGWIN__)
+	TRUE,			/* compiled under cygwin */
+#else
+	FALSE,			/* not compiled with cygwin */
+#endif
+#if defined(CUSTOM)
+	TRUE,			/* compiled with -DCUSTOM */
+#else
+	FALSE,			/* compiled without -DCUSTOM */
+#endif
+	&allow_custom,		/* *TRUE=> custom functions are enabled */
+	NULL,			/* version */
+	BASEB,			/* base for calculations */
+	TRUE,			/* warn when redeclaring */
+	TRUE,			/* warn when variable names collide */
 };
 CONFIG newstd = {	/* new non-backward compatible configuration */
 	MODE_INITIAL,		/* current output mode */
-	10,			/* current output digits for float or exp */
+	MODE2_INITIAL,		/* current output mode */
+	20,			/* current output digits for float or exp */
 	NULL,	/* loaded in at startup - default error for real functions */
-	NEW_EPSILONPREC_DEFAULT,	/* binary precision of epsilon */
+	EPSILONPREC_DEFAULT,	/* binary precision of epsilon */
 	FALSE,			/* tracing flags */
 	MAXPRINT_DEFAULT,	/* number of elements to print */
 	MUL_ALG2,		/* size of number to use multiply alg 2 */
 	SQ_ALG2,		/* size of number to use square alg 2 */
 	POW_ALG2,		/* size of modulus to use REDC for powers */
 	REDC_ALG2,		/* size of modulus to use REDC algorithm 2 */
-	TRUE,			/* ok to print a tilde on aproximations */
+	TRUE,			/* ok to print a tilde on approximations */
 	TRUE,			/* ok to print tab before numeric values */
 	0,			/* quomod() default rounding mode */
-	0,			/* quotent // default rounding mode */
+	2,			/* quotient // default rounding mode */
 	0,			/* mod % default rounding mode */
 	24,			/* sqrt() default rounding mode */
 	24,			/* appr() default rounding mode */
@@ -161,7 +191,7 @@ CONFIG newstd = {	/* new non-backward compatible configuration */
 	24,			/* output default rounding mode */
 	24,			/* round()/bround() default rounding mode */
 	TRUE,			/* ok to print leading 0 before decimal pt */
-	1,			/* ok to print trailing 0's */
+	0,			/* ok to print trailing 0's */
 	MAXSCANCOUNT,		/* max scan errors before abort */
 	"; ",			/* normal prompt */
 	";; ",			/* prompt when inside multi-line input */
@@ -172,11 +202,30 @@ CONFIG newstd = {	/* new non-backward compatible configuration */
 	0,			/* internal calc debug level */
 	3,			/* calc resource file debug level */
 	0,			/* user defined debug level */
-	TRUE,			/* print Quit or abort executed messages */
+	FALSE,			/* print Quit or abort executed messages */
 	CTRL_D_VIRGIN_EOF,	/* ^D only exits on virgin lines */
 	NULL,			/* our name */
 	NULL,			/* basename of our name */
-	NULL			/* version */
+#if defined(_WIN32)
+	TRUE,			/* running under windows */
+#else
+	FALSE,			/* congrats, you are not using windows */
+#endif
+#if defined(__CYGWIN__)
+	TRUE,			/* compiled under cygwin */
+#else
+	FALSE,			/* not compiled with cygwin */
+#endif
+#if defined(CUSTOM)
+	TRUE,			/* compiled with -DCUSTOM */
+#else
+	FALSE,			/* compiled without -DCUSTOM */
+#endif
+	&allow_custom,		/* *TRUE=> custom functions are enabled */
+	NULL,			/* version */
+	BASEB,			/* base for calculations */
+	TRUE,			/* warn when redeclaring */
+	TRUE,			/* warn when variable names collide */
 };
 CONFIG *conf = NULL;	/* loaded in at startup - current configuration */
 
@@ -201,6 +250,7 @@ static NAMETYPE modes[] = {
 	{"oct",		MODE_OCTAL},
 	{"binary",	MODE_BINARY},
 	{"bin",		MODE_BINARY},
+	{"off",		MODE2_OFF},
 	{NULL,		0}
 };
 
@@ -287,10 +337,11 @@ static NAMETYPE truth[] = {
 
 
 /*
- * declate static functions
+ * declare static functions
  */
 static long lookup_long(NAMETYPE *set, char *name);
 static char *lookup_name(NAMETYPE *set, long val);
+static int getlen(VALUE *vp, LEN *lp);
 
 
 /*
@@ -360,6 +411,27 @@ lookup_name(NAMETYPE *set, long val)
 }
 
 
+/*
+ * Check whether VALUE at vp is a LEN (32-bit signed integer) and if so,
+ * copy that integer to lp.
+ *
+ * Return: 1 ==> not an integer, 2 ==> int > 2^31, 0 ==> OK, -1 ==> error
+ */
+
+static int
+getlen(VALUE *vp, LEN *lp)
+{
+	if (vp->v_type != V_NUM || !qisint(vp->v_num))
+		return 1;
+	if (zge31b(vp->v_num->num))
+		return 2;
+	*lp = ztoi(vp->v_num->num);
+	if (*lp < 0)
+		return -1;
+	return 0;
+}
+
+
 /*
  * Set the specified configuration type to the specified value.
  * An error is generated if the type number or value is illegal.
@@ -370,6 +442,7 @@ setconfig(int type, VALUE *vp)
 	NUMBER *q;
 	CONFIG *newconf;	/* new configuration to set */
 	long temp;
+	LEN len = 0;
 	char *p;
 
 	switch (type) {
@@ -414,15 +487,11 @@ setconfig(int type, VALUE *vp)
 		break;
 
 	case CONFIG_DISPLAY:
-		if (vp->v_type != V_NUM) {
-			math_error("Non-numeric for display");
+		if (getlen(vp, &len)) {
+			math_error("Bad value for display");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num))
-			temp = -1;
-		math_setdigits(temp);
+		math_setdigits(len);
 		break;
 
 	case CONFIG_MODE:
@@ -438,6 +507,19 @@ setconfig(int type, VALUE *vp)
 		math_setmode((int) temp);
 		break;
 
+	case CONFIG_MODE2:
+		if (vp->v_type != V_STR) {
+			math_error("Non-string for mode");
+			/*NOTREACHED*/
+		}
+		temp = lookup_long(modes, vp->v_str->s_str);
+		if (temp < 0) {
+			math_error("Unknown mode \"%s\"", vp->v_str);
+			/*NOTREACHED*/
+		}
+		math_setmode2((int) temp);
+		break;
+
 	case CONFIG_EPSILON:
 		if (vp->v_type != V_NUM) {
 			math_error("Non-numeric for epsilon");
@@ -447,91 +529,51 @@ setconfig(int type, VALUE *vp)
 		break;
 
 	case CONFIG_MAXPRINT:
-		if (vp->v_type != V_NUM) {
-			math_error("Non-numeric for maxprint");
+		if (getlen(vp, &len)) {
+			math_error("Bad value for maxprint");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num))
-			temp = -1;
-		if (temp < 0) {
-			math_error("Maxprint value is out of range");
-			/*NOTREACHED*/
-		}
-		conf->maxprint = temp;
+		conf->maxprint = len;
 		break;
 
 	case CONFIG_MUL2:
-		if (vp->v_type != V_NUM) {
-			math_error("Non-numeric for mul2");
+		if (getlen(vp, &len) || len < 0 || len == 1) {
+			math_error("Bad value for mul2");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q))
-			temp = -1;
-		if (temp == 0)
-			temp = MUL_ALG2;
-		if (temp < 2) {
-			math_error("Illegal mul2 value");
-			/*NOTREACHED*/
-		}
-		conf->mul2 = (int)temp;
+		if (len == 0)
+			len = MUL_ALG2;
+		conf->mul2 = len;
 		break;
 
 	case CONFIG_SQ2:
-		if (vp->v_type != V_NUM) {
-			math_error("Non-numeric for sq2");
+		if (getlen(vp, &len) || len < 0 || len == 1) {
+			math_error("Bad value for sq2");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q))
-			temp = -1;
-		if (temp == 0)
-			temp = SQ_ALG2;
-		if (temp < 2) {
-			math_error("Illegal sq2 value");
-			/*NOTREACHED*/
-		}
-		conf->sq2 = (int)temp;
+		if (len == 0)
+			len = SQ_ALG2;
+		conf->sq2 = len;
 		break;
 
 	case CONFIG_POW2:
-		if (vp->v_type != V_NUM) {
-			math_error("Non-numeric for pow2");
+		if (getlen(vp, &len) || len < 0 || len == 1) {
+			math_error("Bad value for pow2");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q))
-			temp = -1;
-		if (temp == 0)
-			temp = POW_ALG2;
-		if (temp < 1) {
-			math_error("Illegal pow2 value");
-			/*NOTREACHED*/
-		}
-		conf->pow2 = (int)temp;
+		if (len == 0)
+			len = POW_ALG2;
+		conf->pow2 = len;
 		break;
 
 	case CONFIG_REDC2:
-		if (vp->v_type != V_NUM) {
-			math_error("Non-numeric for redc2");
+		if (getlen(vp, &len) || len < 0 || len == 1) {
+			math_error("Bad value for redc2");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q))
-			temp = -1;
-		if (temp == 0)
-			temp = REDC_ALG2;
-		if (temp < 1) {
-			math_error("Illegal redc2 value");
-			/*NOTREACHED*/
-		}
-		conf->redc2 = (int)temp;
+		if (len == 0)
+			len = REDC_ALG2;
+		conf->redc2 = len;
 		break;
 
 	case CONFIG_TILDE:
@@ -563,129 +605,75 @@ setconfig(int type, VALUE *vp)
 		break;
 
 	case CONFIG_QUOMOD:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for quomod");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for quomod");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal quomod parameter value");
-			/*NOTREACHED*/
-		}
-		conf->quomod = temp;
+		conf->quomod = len;
 		break;
 
 	case CONFIG_QUO:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for quo");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for quo");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal quo parameter value");
-			/*NOTREACHED*/
-		}
-		conf->quo = temp;
+		conf->quo = len;
 		break;
 
 	case CONFIG_MOD:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for mod");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for mod");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal mod parameter value");
-			/*NOTREACHED*/
-		}
-		conf->mod = temp;
+		conf->mod = len;
 		break;
 
 	case CONFIG_SQRT:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for sqrt");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for sqrt");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal sqrt parameter value");
-			/*NOTREACHED*/
-		}
-		conf->sqrt = temp;
+		conf->sqrt = len;
 		break;
 
 	case CONFIG_APPR:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for appr");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for appr");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal appr parameter value");
-			/*NOTREACHED*/
-		}
-		conf->appr = temp;
+		conf->appr = len;
 		break;
 
 	case CONFIG_CFAPPR:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for cfappr");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for cfappr");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal cfappr parameter value");
-			/*NOTREACHED*/
-		}
-		conf->cfappr = temp;
+		conf->cfappr = len;
 		break;
 
 	case CONFIG_CFSIM:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for cfsim");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for cfsim");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal cfsim parameter value");
-			/*NOTREACHED*/
-		}
-		conf->cfsim = temp;
+		conf->cfsim = len;
 		break;
 
 	case CONFIG_OUTROUND:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for outround");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for outround");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal output parameter value");
-			/*NOTREACHED*/
-		}
-		conf->outround = temp;
+		conf->outround = len;
 		break;
 
 	case CONFIG_ROUND:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for round");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for round");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal output parameter value");
-			/*NOTREACHED*/
-		}
-		conf->round = temp;
+		conf->round = len;
 		break;
 
 	case CONFIG_LEADZERO:
@@ -744,7 +732,7 @@ setconfig(int type, VALUE *vp)
 			math_error("Cannot duplicate new prompt");
 			/*NOTREACHED*/
 		}
-		strcpy(p, vp->v_str->s_str);
+		strncpy(p, vp->v_str->s_str, vp->v_str->s_len + 1);
 		free(conf->prompt1);
 		conf->prompt1 = p;
 		break;
@@ -759,7 +747,7 @@ setconfig(int type, VALUE *vp)
 			math_error("Cannot duplicate new more prompt");
 			/*NOTREACHED*/
 		}
-		strcpy(p, vp->v_str->s_str);
+		strncpy(p, vp->v_str->s_str, vp->v_str->s_len + 1);
 		free(conf->prompt2);
 		conf->prompt2 = p;
 		break;
@@ -898,13 +886,61 @@ setconfig(int type, VALUE *vp)
 		/*NOTREACHED*/
 
 	case CONFIG_BASENAME:
-		math_error("The program config parameter is read-only");
+		math_error("The basename config parameter is read-only");
+		/*NOTREACHED*/
+
+	case CONFIG_WINDOWS:
+		math_error("The windows config parameter is read-only");
+		/*NOTREACHED*/
+
+	case CONFIG_CYGWIN:
+		math_error("The cygwin config parameter is read-only");
+		/*NOTREACHED*/
+
+	case CONFIG_COMPILE_CUSTOM:
+		math_error("The custom config parameter is read-only");
+		/*NOTREACHED*/
+
+	case CONFIG_ALLOW_CUSTOM:
+		math_error("The allow_custom config parameter is read-only");
 		/*NOTREACHED*/
 
 	case CONFIG_VERSION:
-		math_error("The program config parameter is read-only");
+		math_error("The version config parameter is read-only");
 		/*NOTREACHED*/
 
+	case CONFIG_BASEB:
+		math_error("The baseb config parameter is read-only");
+		/*NOTREACHED*/
+
+	case CONFIG_REDECL_WARN:
+		if (vp->v_type == V_NUM) {
+			q = vp->v_num;
+			conf->redecl_warn = !qiszero(q);
+		} else if (vp->v_type == V_STR) {
+			temp = lookup_long(truth, vp->v_str->s_str);
+			if (temp < 0) {
+				math_error("Illegal truth value for redecl_warn");
+				/*NOTREACHED*/
+			}
+			conf->redecl_warn = (int)temp;
+		}
+		break;
+
+	case CONFIG_DUPVAR_WARN:
+		if (vp->v_type == V_NUM) {
+			q = vp->v_num;
+			conf->dupvar_warn = !qiszero(q);
+		} else if (vp->v_type == V_STR) {
+			temp = lookup_long(truth, vp->v_str->s_str);
+			if (temp < 0) {
+				math_error("Illegal truth value for dupvar_warn");
+				/*NOTREACHED*/
+			}
+			conf->dupvar_warn = (int)temp;
+		}
+		break;
+
 	default:
 		math_error("Setting illegal config parameter");
 		/*NOTREACHED*/
@@ -965,6 +1001,7 @@ config_copy(CONFIG *src)
 	} else {
 		dest->base_name = strdup(src->base_name);
 	}
+	/* NOTE: allow_custom points to a global variable, so do not clone it */
 	if (src->version == NULL) {
 		dest->version = strdup(version());
 	} else {
@@ -1012,6 +1049,7 @@ config_free(CONFIG *cfg)
 	if (cfg->base_name != NULL) {
 		free(cfg->base_name);
 	}
+	/* NOTE: allow_custom points to a global variable, so do not free it */
 	if (cfg->version != NULL) {
 		free(cfg->version);
 	}
@@ -1079,6 +1117,16 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		vp->v_str = makenewstring(p);
 		return;
 
+	case CONFIG_MODE2:
+		vp->v_type = V_STR;
+		p = lookup_name(modes, cfg->outmode2);
+		if (p == NULL) {
+			math_error("invalid secondary output mode: %d", cfg->outmode2);
+			/*NOTREACHED*/
+		}
+		vp->v_str = makenewstring(p);
+		return;
+
 	case CONFIG_EPSILON:
 		vp->v_num = qlink(cfg->epsilon);
 		return;
@@ -1104,22 +1152,12 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		break;
 
 	case CONFIG_TILDE:
-		vp->v_type = V_STR;
-		if (cfg->tilde_ok) {
-			vp->v_str = makenewstring(TRUE_STRING);
-		} else {
-			vp->v_str = makenewstring(FALSE_STRING);
-		}
-		return;
+		i = (cfg->tilde_ok ? 1 : 0);
+		break;
 
 	case CONFIG_TAB:
-		vp->v_type = V_STR;
-		if (cfg->tab_ok) {
-			vp->v_str = makenewstring(TRUE_STRING);
-		} else {
-			vp->v_str = makenewstring(FALSE_STRING);
-		}
-		return;
+		i = (cfg->tab_ok ? 1 : 0);
+		break;
 
 	case CONFIG_QUOMOD:
 		i = cfg->quomod;
@@ -1158,22 +1196,12 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		break;
 
 	case CONFIG_LEADZERO:
-		vp->v_type = V_STR;
-		if (cfg->leadzero) {
-			vp->v_str = makenewstring(TRUE_STRING);
-		} else {
-			vp->v_str = makenewstring(FALSE_STRING);
-		}
-		return;
+		i = (cfg->leadzero ? 1 : 0);
+		break;
 
 	case CONFIG_FULLZERO:
-		vp->v_type = V_STR;
-		if (cfg->fullzero) {
-			vp->v_str = makenewstring(TRUE_STRING);
-		} else {
-			vp->v_str = makenewstring(FALSE_STRING);
-		}
-		return;
+		i = (cfg->fullzero ? 1 : 0);
+		break;
 
 	case CONFIG_MAXSCAN:
 		i = cfg->maxscancount;
@@ -1194,13 +1222,8 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		break;
 
 	case CONFIG_BLKVERBOSE:
-		vp->v_type = V_STR;
-		if (cfg->blkverbose) {
-			vp->v_str = makenewstring(TRUE_STRING);
-		} else {
-			vp->v_str = makenewstring(FALSE_STRING);
-		}
-		return;
+		i = (cfg->blkverbose ? 1 : 0);
+		break;
 
 	case CONFIG_BLKBASE:
 		vp->v_type = V_STR;
@@ -1235,13 +1258,8 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		break;
 
 	case CONFIG_VERBOSE_QUIT:
-		vp->v_type = V_STR;
-		if (cfg->verbose_quit) {
-			vp->v_str = makenewstring(TRUE_STRING);
-		} else {
-			vp->v_str = makenewstring(FALSE_STRING);
-		}
-		return;
+		i = (cfg->verbose_quit ? 1 : 0);
+		break;
 
 	case CONFIG_CTRL_D:
 		vp->v_type = V_STR;
@@ -1271,6 +1289,26 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		}
 		return;
 
+	case CONFIG_WINDOWS:
+		i = (cfg->windows ? 1 : 0);
+		break;
+
+	case CONFIG_CYGWIN:
+		i = (cfg->cygwin ? 1 : 0);
+		break;
+
+	case CONFIG_COMPILE_CUSTOM:
+		i = (cfg->compile_custom ? 1 : 0);
+		break;
+
+	case CONFIG_ALLOW_CUSTOM:
+		/* firewall */
+		if (cfg->allow_custom == NULL) {
+			cfg->allow_custom = &allow_custom;
+		}
+		i = (*(cfg->allow_custom) ? 1 : 0);
+		break;
+
 	case CONFIG_VERSION:
 		vp->v_type = V_STR;
 		if (cfg->version == NULL) {
@@ -1280,6 +1318,18 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		}
 		return;
 
+	case CONFIG_BASEB:
+		i = BASEB;
+		break;
+
+	case CONFIG_REDECL_WARN:
+		i = (cfg->redecl_warn ? 1 : 0);
+		break;
+
+	case CONFIG_DUPVAR_WARN:
+		i = (cfg->dupvar_warn ? 1 : 0);
+		break;
+
 	default:
 		math_error("Getting illegal CONFIG element");
 		/*NOTREACHED*/
@@ -1311,12 +1361,12 @@ config_cmp(CONFIG *cfg1, CONFIG *cfg2)
 	 */
 	if (cfg1 == NULL || cfg1->epsilon == NULL || cfg1->prompt1 == NULL ||
 	    cfg1->prompt2 == NULL) {
-		math_error("CONFIG #1 value is invaid");
+		math_error("CONFIG #1 value is invalid");
 		/*NOTREACHED*/
 	}
 	if (cfg2 == NULL || cfg2->epsilon == NULL || cfg2->prompt1 == NULL ||
 	    cfg2->prompt2 == NULL) {
-		math_error("CONFIG #2 value is invaid");
+		math_error("CONFIG #2 value is invalid");
 		/*NOTREACHED*/
 	}
 
@@ -1326,6 +1376,7 @@ config_cmp(CONFIG *cfg1, CONFIG *cfg2)
 	return cfg1->traceflags != cfg2->traceflags ||
 	       cfg1->outdigits != cfg2->outdigits ||
 	       cfg1->outmode != cfg2->outmode ||
+	       cfg1->outmode2 != cfg2->outmode2 ||
 	       qcmp(cfg1->epsilon, cfg2->epsilon) ||
 	       cfg1->epsilonprec != cfg2->epsilonprec ||
 	       cfg1->maxprint != cfg2->maxprint ||
@@ -1369,8 +1420,21 @@ config_cmp(CONFIG *cfg1, CONFIG *cfg2)
 	       (cfg1->base_name != NULL && cfg2->base_name != NULL &&
 		strcmp(cfg1->base_name, cfg2->base_name) != 0) ||
 
+	       cfg1->windows != cfg2->windows ||
+
+	       cfg1->cygwin != cfg2->cygwin ||
+
+	       cfg1->compile_custom != cfg2->compile_custom ||
+
+	       (cfg1->allow_custom == NULL && cfg2->allow_custom != NULL) ||
+	       (cfg1->allow_custom != NULL && cfg2->allow_custom == NULL) ||
+	       (cfg1->allow_custom != NULL && cfg2->allow_custom != NULL &&
+		*(cfg1->allow_custom) != *(cfg2->allow_custom)) ||
+
 	       (cfg1->version == NULL && cfg2->version != NULL) ||
 	       (cfg1->version != NULL && cfg2->version == NULL) ||
 	       (cfg1->version != NULL && cfg2->version != NULL &&
-		strcmp(cfg1->version, cfg2->version) != 0);
+		strcmp(cfg1->version, cfg2->version) != 0) ||
+
+	       cfg1->baseb != cfg2->baseb;
 }

config.h

@@ -1,7 +1,7 @@
 /*
  * config - configuration routines
  *
- * Copyright (C) 1999  Landon Curt Noll and David I. Bell
+ * Copyright (C) 1999-2004  Landon Curt Noll and David I. Bell
  *
  * Primary author:  Landon Curt Noll
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: config.h,v 29.3 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.20 $
+ * @(#) $Id: config.h,v 29.20 2006/06/25 22:05:38 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/config.h,v $
  *
  * Under source code control:	1995/11/01 22:20:17
@@ -35,8 +35,15 @@
 #define __CONFIG_H__
 
 
-#include "nametype.h"
-#include "qmath.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "win32dll.h"
+# include "nametype.h"
+# include "qmath.h"
+#else
+# include <calc/win32dll.h>
+# include <calc/nametype.h>
+# include <calc/qmath.h>
+#endif
 
 
 /*
@@ -71,17 +78,25 @@
 #define CONFIG_MORE	25
 #define CONFIG_BLKMAXPRINT 26
 #define CONFIG_BLKVERBOSE 27
-#define CONFIG_BLKBASE 28
-#define CONFIG_BLKFMT 29
+#define CONFIG_BLKBASE	28
+#define CONFIG_BLKFMT	29
 #define CONFIG_RESOURCE_DEBUG 30
 #define CONFIG_LIB_DEBUG CONFIG_RESOURCE_DEBUG
 #define CONFIG_CALC_DEBUG 31
 #define CONFIG_USER_DEBUG 32
 #define CONFIG_VERBOSE_QUIT 33
-#define CONFIG_CTRL_D 34
-#define CONFIG_PROGRAM 35
-#define CONFIG_BASENAME 36
-#define CONFIG_VERSION 37
+#define CONFIG_CTRL_D	34
+#define CONFIG_PROGRAM	35
+#define CONFIG_BASENAME	36
+#define CONFIG_VERSION	37
+#define CONFIG_WINDOWS	38
+#define CONFIG_MODE2	39
+#define CONFIG_CYGWIN	40
+#define CONFIG_COMPILE_CUSTOM	41
+#define CONFIG_ALLOW_CUSTOM	42
+#define CONFIG_BASEB	43
+#define CONFIG_REDECL_WARN	44
+#define CONFIG_DUPVAR_WARN	45
 
 
 /*
@@ -90,8 +105,6 @@
 #define DISPLAY_DEFAULT 20	/* default digits for float display */
 #define EPSILON_DEFAULT "1e-20" /* allowed error for float calculations */
 #define EPSILONPREC_DEFAULT 67	/* 67 ==> 2^-67 <= EPSILON_DEFAULT < 2^-66 */
-#define NEW_EPSILON_DEFAULT "1e-10"	/* newstd EPSILON_DEFAULT */
-#define NEW_EPSILONPREC_DEFAULT 34	/* 34 ==> 2^-34 <= 1e-10 < 2^-33 */
 #define MAXPRINT_DEFAULT 16	/* default number of elements printed */
 #define MAXSCANCOUNT 20		/* default max scan errors before an abort */
 
@@ -110,26 +123,27 @@
  */
 struct config {
 	int outmode;		/* current output mode */
-	long outdigits;		/* current output digits for float or exp */
+	int outmode2;		/* current secondary output mode */
+	LEN outdigits;		/* current output digits for float or exp */
 	NUMBER *epsilon;	/* default error for real functions */
 	    long epsilonprec;	/* epsilon binary precision (tied to epsilon) */
 	FLAG traceflags;	/* tracing flags */
-	long maxprint;		/* number of elements to print */
+	LEN maxprint;		/* number of elements to print */
 	LEN mul2;		/* size of number to use multiply algorithm 2 */
 	LEN sq2;		/* size of number to use square algorithm 2 */
 	LEN pow2;		/* size of modulus to use REDC for powers */
 	LEN redc2;		/* size of modulus to use REDC algorithm 2 */
 	BOOL tilde_ok;		/* ok to print a tilde on aproximations */
 	BOOL tab_ok;		/* ok to print tab before numeric values */
-	long quomod;		/* quomod() default rounding mode */
-	long quo;		/* quotent // default rounding mode */
-	long mod;		/* mod % default rounding mode */
-	long sqrt;		/* sqrt() default rounding mode */
-	long appr;		/* appr() default rounding mode */
-	long cfappr;		/* cfappr() default rounding mode */
-	long cfsim;		/* cfsim() default rounding mode */
-	long outround;		/* output default rounding mode */
-	long round;		/* round()/bround() default rounding mode */
+	LEN quomod;		/* quomod() default rounding mode */
+	LEN quo;		/* quotient // default rounding mode */
+	LEN mod;		/* mod % default rounding mode */
+	LEN sqrt;		/* sqrt() default rounding mode */
+	LEN appr;		/* appr() default rounding mode */
+	LEN cfappr;		/* cfappr() default rounding mode */
+	LEN cfsim;		/* cfsim() default rounding mode */
+	LEN outround;		/* output default rounding mode */
+	LEN round;		/* round()/bround() default rounding mode */
 	BOOL leadzero;		/* ok to print leading 0 before decimal pt */
 	BOOL fullzero;		/* ok to print trailing 0's */
 	long maxscancount;	/* max scan errors before abort */
@@ -139,14 +153,21 @@ struct config {
 	BOOL blkverbose;	/* TRUE => print all lines if a block */
 	int blkbase;		/* block output base */
 	int blkfmt;		/* block output style */
-	long calc_debug;	/* internal debug, see CALC_DEBUG_XXX below */
-	long resource_debug;	/* resource debug, see RSCDBG_XXX below */
+	long calc_debug;	/* internal debug, see CALC_DEBUG_XYZ below */
+	long resource_debug;	/* resource debug, see RSCDBG_XYZ below */
 	long user_debug;	/* user defined debug value: 0 default */
 	BOOL verbose_quit;	/* TRUE => print Quit or abort executed msg */
 	int ctrl_d;		/* see CTRL_D_xyz below */
 	char *program;		/* our name */
 	char *base_name;	/* basename of our name */
+	BOOL windows;		/* TRUE => running under MS windows */
+	BOOL cygwin;		/* TRUE => compiled with cygwin */
+	BOOL compile_custom;	/* TRUE => compiled with -DCUSTOM */
+	BOOL *allow_custom;	/* ptr to if custom functions are allowed */
 	char *version;		/* calc version string */
+	int baseb;		/* base for calculations */
+	BOOL redecl_warn;	/* TRUE => warn of redeclating variables */
+	BOOL dupvar_warn;	/* TRUE => warn of var name collisions */
 };
 typedef struct config CONFIG;
 
@@ -157,7 +178,8 @@ typedef struct config CONFIG;
 #define RSCDBG_STDIN_FUNC   (0x00000001)    /* interactive func define debug */
 #define RSCDBG_FILE_FUNC    (0x00000002)    /* file read func define debug */
 #define RSCDBG_FUNC_INFO    (0x00000004)    /* print extra info for show func */
-#define RSCDBG_MASK	    (0x00000007)
+#define RSCDBG_PRINT_DBG    (0x00000008)    /* print debug messages */
+#define RSCDBG_MASK	    (0x0000000f)
 
 
 /*
@@ -169,7 +191,8 @@ typedef struct config CONFIG;
 #define CALCDBG_BLOCK	    (0x00000008)    /* block debug */
 #define CALCDBG_TTY	    (0x00000010)    /* report TTY state changes */
 #define CALCDBG_RUNSTATE    (0x00000020)    /* report run_state changes */
-#define CALCDBG_MASK	    (0x0000003f)
+#define CALCDBG_RAND	    (0x00000040)    /* report rand() activity */
+#define CALCDBG_MASK	    (0x0000007f)
 
 /*
  * ctrl-d meanings
@@ -182,23 +205,23 @@ typedef struct config CONFIG;
 /*
  * global configuration states and aliases
  */
-extern CONFIG *conf;		/* current configuration */
-extern CONFIG oldstd;		/* backward compatible standard configuration */
-extern CONFIG newstd;		/* new non-backward compatible configuration */
-extern char *calc_debug;	/* !=NULL => value of config("calc_debug") */
-extern char *resource_debug;	/* !=NULL => config("resource_debug") value */
-extern char *user_debug;	/* !=NULL => value of config("user_debug") */
+extern DLL CONFIG *conf;	/* current configuration */
+extern DLL CONFIG oldstd;	/* old classic standard configuration */
+extern DLL CONFIG newstd;	/* default compatible configuration */
+extern DLL char *calc_debug;	/* !=NULL => value of config("calc_debug") */
+extern DLL char *resource_debug; /* !=NULL => config("resource_debug") value */
+extern DLL char *user_debug;	/* !=NULL => value of config("user_debug") */
 
 
 /*
  * configuration externals
  */
-extern CONFIG *config_copy(CONFIG *src);
-extern void config_free(CONFIG *cfg);
-extern void config_print(CONFIG *cfg);
-extern int configtype(char*);
-extern void config_print(CONFIG*);
-extern BOOL config_cmp(CONFIG*, CONFIG*);
+extern DLL CONFIG *config_copy(CONFIG *src);
+extern DLL void config_free(CONFIG *cfg);
+extern DLL void config_print(CONFIG *cfg);
+extern DLL int configtype(char*);
+extern DLL void config_print(CONFIG*);
+extern DLL BOOL config_cmp(CONFIG*, CONFIG*);
 
 
 #endif /* !__CONFIG_H__ */

const.c

@@ -1,7 +1,7 @@
 /*
  * const - constant number storage module
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 1999-2004  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: const.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: const.c,v 29.4 2004/02/23 14:04:01 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/const.c,v $
  *
  * Under source code control:	1990/02/15 01:48:14
@@ -34,7 +34,7 @@
 
 #define CONSTALLOCSIZE 400	/* number of constants to allocate */
 
-static long constcount;		/* number of constants defined */
+static unsigned long constcount;/* number of constants defined */
 static long constavail;		/* number of constants available */
 static NUMBER **consttable;	/* table of constants */
 
@@ -92,7 +92,7 @@ addqconstant(NUMBER *q)
 {
 	register NUMBER **tp;	/* pointer to current number */
 	register NUMBER *t;	/* number being tested */
-	long index;		/* index into constant table */
+	unsigned long index;	/* index into constant table */
 	long numlen;		/* numerator length */
 	long denlen;		/* denominator length */
 	HALF numlow;		/* bottom value of numerator */
@@ -221,7 +221,7 @@ trimconstants(void)
 void
 showconstants(void)
 {
-	long index;
+	unsigned long index;
 	NUMBER **qp;
 	long count;
 

cscript/4dsphere.calc

@@ -0,0 +1,320 @@
+#!/usr/local/src/cmd/calc/calc -q -s -f
+/*
+ * 4dsphere - determine if 6 points lie on the surface of a sphere in R^4
+ *
+ * usage:
+ *      4dsphere x0 y0 z0 w0 x1 y1 z1 w1 ... x5 y5 z5 w5
+ *
+ *      x0 y0 z0 w0	point 0 in R^4
+ *      x1 y1 z1 w1	point 1 in R^4
+ *	...		...
+ *      x5 y5 z5 w5	point 5 in R^4
+ *
+ * Copyright (C) 2001  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 1.3 $
+ * @(#) $Id: 4dsphere.calc,v 1.3 2001/06/06 09:06:29 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/4dsphere.calc,v $
+ *
+ * Under source code control:   2001/05/03 19:02:03
+ * File existed as early as:    2001
+ *
+ * chongo <was here> /\oo/\     http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)        http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+/*
+ * parse args
+ */
+argc = argv();
+if (argc != 25) {
+    fprintf(files(2), "usage: %s x0 y0 z0 w0 x1 y1 z1 w1 ... x5 y5 z5 w5\n",
+	argv(0));
+    exit;
+}
+x0 = eval(argv(1));
+y0 = eval(argv(2));
+z0 = eval(argv(3));
+w0 = eval(argv(4));
+x1 = eval(argv(5));
+y1 = eval(argv(6));
+z1 = eval(argv(7));
+w1 = eval(argv(8));
+x2 = eval(argv(9));
+y2 = eval(argv(10));
+z2 = eval(argv(11));
+w2 = eval(argv(12));
+x3 = eval(argv(13));
+y3 = eval(argv(14));
+z3 = eval(argv(15));
+w3 = eval(argv(16));
+x4 = eval(argv(17));
+y4 = eval(argv(18));
+z4 = eval(argv(19));
+w4 = eval(argv(20));
+x5 = eval(argv(21));
+y5 = eval(argv(22));
+z5 = eval(argv(23));
+w5 = eval(argv(24));
+
+/*
+ * verbose output setup
+ */
+print "(":x0:",":y0:",":z0:",":w0:") ":;
+print "(":x1:",":y1:",":z1:",":w1:") ":;
+print "(":x2:",":y2:",":z2:",":w2:") ":;
+print "(":x3:",":y3:",":z3:",":w3:") ":;
+print "(":x4:",":y4:",":z4:",":w4:") ":;
+print "(":x5:",":y5:",":z5:",":w5:") ":;
+
+/*
+ *
+ * Given the 5 points:
+ *
+ * 	(x0,y1,z1,w1)
+ * 	(x1,y1,z1,w1)
+ * 	(x2,y2,z2,w2)
+ * 	(x3,y3,z3,w3)
+ * 	(x4,y4,z4,w4)
+ * 	(x5,y5,z5,w5)
+ *
+ * we can determine if they lie in the surface of 4D sphere in R^4 if the
+ * following matrix is 0:
+ *
+ * 	| x0^2+y0^2+z0^2+w0^2	x0	y0	z0	w0	1 |
+ * 	| x1^2+y1^2+z1^2+w1^2	x1	y1	z1	w1	1 |
+ * 	| x2^2+y2^2+z2^2+w2^2	x2	y2	z2	w2	1 |	= 0
+ * 	| x3^2+y3^2+z3^2+w3^2	x3	y3	z3	w3	1 |
+ * 	| x4^2+y4^2+z4^2+w4^2	x4	y4	z4	w4	1 |
+ * 	| x5^2+y5^2+z5^2+w5^2	x5	y5	z5	w5	1 |
+ */
+if ((w0*(-x1*(-y2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    +y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +y5*(z4^2+y4^2+x4^2+w4^2) + (y4-y5)*(z3^2+y3^2+x3^2+w3^2))
+    -z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z2^2+y2^2+x2^2+w2^2)*(y4*z5+y3*(z4-z5) -y5*z4- (y4-y5)*z3) -
+    (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4)) +y1*(-x2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    +x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +x5*(z4^2+y4^2+x4^2+w4^2)
+    + (x4-x5)*(z3^2+y3^2+x3^2+w3^2)) -z3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) + (z2^2+y2^2+x2^2+w2^2)*(x4*z5+x3*(z4-z5)
+    -x5*z4- (x4-x5)*z3) - (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4))
+    -x2*(-y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4))
+    +y2*(-x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4)) -z1*(-x2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +y5*(z4^2+y4^2+x4^2+w4^2)
+    + (y4-y5)*(z3^2+y3^2+x3^2+w3^2)) +x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +x5*(z4^2+y4^2+x4^2+w4^2) + (x4-x5)*(z3^2+y3^2+x3^2+w3^2))
+    -y3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) -
+    (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2) + (x4*y5+x3*(y4-y5) -x5*y4-
+    (x4-x5)*y3)*(z2^2+y2^2+x2^2+w2^2)) -z2*(-x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) + (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2))
+    + (z1^2+y1^2+x1^2+w1^2)*(x2*(y4*z5+y3*(z4-z5) -y5*z4-
+    (y4-y5)*z3) -x3*(y4*z5-y5*z4) -y2*(x4*z5+x3*(z4-z5) -x5*z4-
+    (x4-x5)*z3) +y3*(x4*z5-x5*z4) - (x4*y5-x5*y4)*z3+
+    (x4*y5+x3*(y4-y5) -x5*y4- (x4-x5)*y3)*z2) +
+    (z2^2+y2^2+x2^2+w2^2)*(x3*(y4*z5-y5*z4) -y3*(x4*z5-x5*z4) +
+    (x4*y5-x5*y4)*z3)) -x0*(-w1*(-y2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    +y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +y5*(z4^2+y4^2+x4^2+w4^2) + (y4-y5)*(z3^2+y3^2+x3^2+w3^2))
+    -z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z2^2+y2^2+x2^2+w2^2)*(y4*z5+y3*(z4-z5) -y5*z4- (y4-y5)*z3) -
+    (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4)) -y1*(w2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    -w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +w5*(z4^2+y4^2+x4^2+w4^2)
+    + (w4-w5)*(z3^2+y3^2+x3^2+w3^2)) +z3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (z2^2+y2^2+x2^2+w2^2)*(-w4*z5-w3*(z4-z5)
+    +w5*z4+ (w4-w5)*z3) - (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5))
+    -w2*(-y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4))
+    -y2*(w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5)) +z1*(w2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +y5*(z4^2+y4^2+x4^2+w4^2)
+    + (y4-y5)*(z3^2+y3^2+x3^2+w3^2)) -w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +w5*(z4^2+y4^2+x4^2+w4^2) + (w4-w5)*(z3^2+y3^2+x3^2+w3^2))
+    +y3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) -
+    (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2) + (-w4*y5-w3*(y4-y5) +w5*y4+
+    (w4-w5)*y3)*(z2^2+y2^2+x2^2+w2^2)) +z2*(w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2))
+    + (z1^2+y1^2+x1^2+w1^2)*(w2*(y4*z5+y3*(z4-z5) -y5*z4-
+    (y4-y5)*z3) -w3*(y4*z5-y5*z4) +y2*(-w4*z5-w3*(z4-z5)
+    +w5*z4+ (w4-w5)*z3) -y3*(w5*z4-w4*z5) + (w5*y4-w4*y5)*z3-
+    (-w4*y5-w3*(y4-y5) +w5*y4+ (w4-w5)*y3)*z2) +
+    (z2^2+y2^2+x2^2+w2^2)*(w3*(y4*z5-y5*z4) +y3*(w5*z4-w4*z5) -
+    (w5*y4-w4*y5)*z3)) +y0*(-w1*(-x2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    +x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +x5*(z4^2+y4^2+x4^2+w4^2) + (x4-x5)*(z3^2+y3^2+x3^2+w3^2))
+    -z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z2^2+y2^2+x2^2+w2^2)*(x4*z5+x3*(z4-z5) -x5*z4- (x4-x5)*z3) -
+    (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4)) -x1*(w2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    -w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +w5*(z4^2+y4^2+x4^2+w4^2)
+    + (w4-w5)*(z3^2+y3^2+x3^2+w3^2)) +z3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (z2^2+y2^2+x2^2+w2^2)*(-w4*z5-w3*(z4-z5)
+    +w5*z4+ (w4-w5)*z3) - (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5))
+    -w2*(-x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4))
+    -x2*(w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5)) +z1*(w2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +x5*(z4^2+y4^2+x4^2+w4^2)
+    + (x4-x5)*(z3^2+y3^2+x3^2+w3^2)) -w3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) -x2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +w5*(z4^2+y4^2+x4^2+w4^2) + (w4-w5)*(z3^2+y3^2+x3^2+w3^2))
+    +x3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) -
+    (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2) + (-w4*x5-w3*(x4-x5) +w5*x4+
+    (w4-w5)*x3)*(z2^2+y2^2+x2^2+w2^2)) +z2*(w3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) -x3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2)) +
+    (z1^2+y1^2+x1^2+w1^2)*(w2*(x4*z5+x3*(z4-z5) -x5*z4- (x4-x5)*z3)
+    -w3*(x4*z5-x5*z4) +x2*(-w4*z5-w3*(z4-z5) +w5*z4+ (w4-w5)*z3)
+    -x3*(w5*z4-w4*z5) + (w5*x4-w4*x5)*z3- (-w4*x5-w3*(x4-x5) +w5*x4+
+    (w4-w5)*x3)*z2) + (z2^2+y2^2+x2^2+w2^2)*(w3*(x4*z5-x5*z4)
+    +x3*(w5*z4-w4*z5) - (w5*x4-w4*x5)*z3))
+    -w1*(-x2*(-y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4))
+    +y2*(-x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4)) -z2*(-x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) + (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2))
+    + (z2^2+y2^2+x2^2+w2^2)*(x3*(y4*z5-y5*z4)
+    -y3*(x4*z5-x5*z4) + (x4*y5-x5*y4)*z3))
+    +x1*(-w2*(-y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4))
+    -y2*(w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5)) +z2*(w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2))
+    + (z2^2+y2^2+x2^2+w2^2)*(w3*(y4*z5-y5*z4)
+    +y3*(w5*z4-w4*z5) - (w5*y4-w4*y5)*z3))
+    -y1*(-w2*(-x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4))
+    -x2*(w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5)) +z2*(w3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) -x3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2))
+    + (z2^2+y2^2+x2^2+w2^2)*(w3*(x4*z5-x5*z4) +x3*(w5*z4-w4*z5)
+    - (w5*x4-w4*x5)*z3)) -z0*(-w1*(-x2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +y5*(z4^2+y4^2+x4^2+w4^2)
+    + (y4-y5)*(z3^2+y3^2+x3^2+w3^2)) +x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +x5*(z4^2+y4^2+x4^2+w4^2) + (x4-x5)*(z3^2+y3^2+x3^2+w3^2))
+    -y3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) -
+    (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2) + (x4*y5+x3*(y4-y5) -x5*y4-
+    (x4-x5)*y3)*(z2^2+y2^2+x2^2+w2^2)) -x1*(w2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +y5*(z4^2+y4^2+x4^2+w4^2)
+    + (y4-y5)*(z3^2+y3^2+x3^2+w3^2)) -w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +w5*(z4^2+y4^2+x4^2+w4^2) + (w4-w5)*(z3^2+y3^2+x3^2+w3^2))
+    +y3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) -
+    (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2) + (-w4*y5-w3*(y4-y5) +w5*y4+
+    (w4-w5)*y3)*(z2^2+y2^2+x2^2+w2^2)) -w2*(-x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) + (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2))
+    -x2*(w3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    -y3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2)) +y1*(w2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +x5*(z4^2+y4^2+x4^2+w4^2)
+    + (x4-x5)*(z3^2+y3^2+x3^2+w3^2)) -w3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) -x2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +w5*(z4^2+y4^2+x4^2+w4^2)
+    + (w4-w5)*(z3^2+y3^2+x3^2+w3^2)) +x3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) - (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2)
+    + (-w4*x5-w3*(x4-x5) +w5*x4+ (w4-w5)*x3)*(z2^2+y2^2+x2^2+w2^2))
+    +y2*(w3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2))
+    -x3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2)) + (w3*(x4*y5-x5*y4) +x3*(w5*y4-w4*y5)
+    - (w5*x4-w4*x5)*y3)*(z2^2+y2^2+x2^2+w2^2) + (w2*(x4*y5+x3*(y4-y5)
+    -x5*y4- (x4-x5)*y3) -w3*(x4*y5-x5*y4) +x2*(-w4*y5-w3*(y4-y5)
+    +w5*y4+ (w4-w5)*y3) -x3*(w5*y4-w4*y5) + (w5*x4-w4*x5)*y3-
+    (-w4*x5-w3*(x4-x5) +w5*x4+ (w4-w5)*x3)*y2)*(z1^2+y1^2+x1^2+w1^2))
+    +z1*(-w2*(-x3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    +y3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) +
+    (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2)) -x2*(w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2))
+    +y2*(w3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2))
+    -x3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2)) + (w3*(x4*y5-x5*y4)
+    +x3*(w5*y4-w4*y5) - (w5*x4-w4*x5)*y3)*(z2^2+y2^2+x2^2+w2^2)) +
+    (z0^2+y0^2+x0^2+w0^2)*(-w1*(x2*(y4*z5+y3*(z4-z5) -y5*z4- (y4-y5)*z3)
+    -x3*(y4*z5-y5*z4) -y2*(x4*z5+x3*(z4-z5) -x5*z4- (x4-x5)*z3)
+    +y3*(x4*z5-x5*z4) - (x4*y5-x5*y4)*z3+ (x4*y5+x3*(y4-y5) -x5*y4-
+    (x4-x5)*y3)*z2) +x1*(w2*(y4*z5+y3*(z4-z5) -y5*z4- (y4-y5)*z3)
+    -w3*(y4*z5-y5*z4) +y2*(-w4*z5-w3*(z4-z5) +w5*z4+ (w4-w5)*z3)
+    -y3*(w5*z4-w4*z5) + (w5*y4-w4*y5)*z3- (-w4*y5-w3*(y4-y5) +w5*y4+
+    (w4-w5)*y3)*z2) -w2*(x3*(y4*z5-y5*z4) -y3*(x4*z5-x5*z4) +
+    (x4*y5-x5*y4)*z3) +x2*(w3*(y4*z5-y5*z4) +y3*(w5*z4-w4*z5) -
+    (w5*y4-w4*y5)*z3) -y1*(w2*(x4*z5+x3*(z4-z5) -x5*z4- (x4-x5)*z3)
+    -w3*(x4*z5-x5*z4) +x2*(-w4*z5-w3*(z4-z5) +w5*z4+ (w4-w5)*z3)
+    -x3*(w5*z4-w4*z5) + (w5*x4-w4*x5)*z3- (-w4*x5-w3*(x4-x5) +w5*x4+
+    (w4-w5)*x3)*z2) -y2*(w3*(x4*z5-x5*z4) +x3*(w5*z4-w4*z5) -
+    (w5*x4-w4*x5)*z3) + (w3*(x4*y5-x5*y4) +x3*(w5*y4-w4*y5) -
+    (w5*x4-w4*x5)*y3)*z2+ (w2*(x4*y5+x3*(y4-y5) -x5*y4- (x4-x5)*y3)
+    -w3*(x4*y5-x5*y4) +x2*(-w4*y5-w3*(y4-y5) +w5*y4+ (w4-w5)*y3)
+    -x3*(w5*y4-w4*y5) + (w5*x4-w4*x5)*y3- (-w4*x5-w3*(x4-x5) +w5*x4+
+    (w4-w5)*x3)*y2)*z1) - (z1^2+y1^2+x1^2+w1^2)*(-w2*(x3*(y4*z5-y5*z4)
+    -y3*(x4*z5-x5*z4) + (x4*y5-x5*y4)*z3) +x2*(w3*(y4*z5-y5*z4)
+    +y3*(w5*z4-w4*z5) - (w5*y4-w4*y5)*z3) -y2*(w3*(x4*z5-x5*z4)
+    +x3*(w5*z4-w4*z5) - (w5*x4-w4*x5)*z3) + (w3*(x4*y5-x5*y4)
+    +x3*(w5*y4-w4*y5) - (w5*x4-w4*x5)*y3)*z2)) == 0) {
+    print "are in the surface of a 4D sphere";
+} else {
+    print "are NOT on a 4D sphere surface";
+}

cscript/Makefile

@@ -17,8 +17,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.5 $
-# @(#) $Id: Makefile,v 29.5 2000/06/07 14:02:59 chongo Exp $
+# @(#) $Revision: 29.25 $
+# @(#) $Id: Makefile,v 29.25 2006/09/18 00:13:59 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/Makefile,v $
 #
 # Under source code control:	1999/11/29 11:10:26
@@ -36,15 +36,121 @@
 SHELL= /bin/sh
 MAKE_FILE = Makefile
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
+####
+
+# Where the system include (.h) files are kept
 #
-BINDIR= /usr/local/bin
-#BINDIR= /usr/bin
-#BINDIR= /usr/contrib/bin
+# For DJGPP, select:
 #
+#	INCDIR= /dev/env/DJDIR/include
+#
+# If in doubt, set:
+#
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
 SCRIPTDIR= ${BINDIR}/cscript
 
+# T - top level directory under which calc will be installed
+#
+# The calc install is performed under $T, the calc build is
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
+#
+# If $T is empty, calc is installed under /, which is the same
+# top of tree for which it was built.  If $T is non-empty, then
+# calc is installed under $T, as if one had to chroot under
+# $T for calc to operate.
+#
+# If in doubt, use T=
+#
+T=
+
 # Makefile debug
 #
 # Q=@	do not echo internal makefile actions (quiet mode)
@@ -59,13 +165,14 @@ CHMOD= chmod
 SED= sed
 SORT= sort
 FMT= fmt
+CMP= cmp
 
 # The ${SCRIPT} list is the list of calc shell script files (without the .calc
 # extension) which will be installed.
 #
 # The ${SCRIPT_SRC} is built from ${SCRIPT} and has the .calc extensions.
 #
-# This list is prodiced by the detaillist rule when no WARNINGS are detected.
+# This list is produced by the detaillist rule when no WARNINGS are detected.
 # To add a script:
 #
 #	1) Name the file with a .calc filename extension
@@ -76,26 +183,36 @@ FMT= fmt
 #
 #		make detaillist
 #
-SCRIPT= mersenne piforever plus simple
+SCRIPT= 4dsphere fproduct mersenne piforever plus powerterm \
+	simple square
 
-SCRIPT_SRC= mersenne.calc piforever.calc plus.calc simple.calc
+SCRIPT_SRC= 4dsphere.calc fproduct.calc mersenne.calc \
+	piforever.calc plus.calc powerterm.calc simple.calc square.calc
 
 # These files are found (but not built) in the distribution
 #
 DISTLIST= ${SCRIPT_SRC} ${MAKE_FILE} README
 
-# These files are used to make (but not built) a calc .a library
+# These files are used to make (but not build) a calc .a library
 #
 CALCLIBLIST=
 
+# complete list of targets
+#
+# NOTE: This list MUST be co-ordinated with the ${CSCRIPT_TARGETS} variable
+#	in the upper level ../Makefile
+#
+CSCRIPT_TARGETS= ${SCRIPT}
+TARGETS= ${CSCRIPT_TARGETS}
+
 # The reason for this Makefile
 #
-all: ${SCRIPT} ${SCRIPT_SRC} .all
+all: ${TARGETS} .all
 
-# used by the upper level Makefile to determine of we have done all
+# used by the upper level Makefile to determine if we have done all
 #
 # NOTE: Due to bogus shells found on one common system we must have
-#	an non-emoty else clause for every if condition.  *sigh*
+#	a non-empty else clause for every if condition.  *sigh*
 #
 .all:
 	rm -f .all
@@ -112,37 +229,43 @@ all: ${SCRIPT} ${SCRIPT_SRC} .all
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q} for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo cscript/$$i; \
-	done | ${SORT}
+	    fi; \
+	done | LANG=C ${SORT}
 
 distdir:
-	${Q}echo cscript
+	${Q} echo cscript
 
 calcliblist:
 
 # These next rule help me form the ${DETAIL_HELP} makefile variables above.
 #
 detaillist:
-	${Q}-(echo "xxxxxxx"; \
-	   for i in ${SCRIPT}; do \
+	${Q} -(echo "xxxxxxx"; \
+	   for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		if [ ! -f RCS/$$i.calc,v ]; then \
 		    echo "WARNING: $$i.calc not under RCS control" 1>&2; \
 		else \
 		    echo $$i; \
 		fi; \
-	done | ${SORT}) | ${FMT} -70 | \
+	    fi; \
+	done | LANG=C ${SORT}) | ${FMT} -70 | \
 	    ${SED} -e '1s/xxxxxxx/SCRIPT=/' -e '2,$$s/^/	/' \
 		   -e 's/$$/ \\/' -e '$$s/ \\$$//'
-	${Q}echo
-	${Q}-(echo "xxxxxxxxxxx"; \
-	   for i in ${SCRIPT}; do \
+	${Q} echo
+	${Q} -(echo "xxxxxxxxxxx"; \
+	   for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		if [ ! -f RCS/$$i.calc,v ]; then \
 		    echo "WARNING: $$i.calc not under RCS control" 1>&2; \
 		else \
 		    echo $$i.calc; \
 		fi; \
-	done | ${SORT}) | ${FMT} -70 | \
+	    fi; \
+	done | LANG=C ${SORT}) | ${FMT} -70 | \
 	    ${SED} -e '1s/xxxxxxxxxxx/SCRIPT_SRC=/' -e '2,$$s/^/	/' \
 		   -e 's/$$/ \\/' -e '$$s/ \\$$//'
 
@@ -159,32 +282,34 @@ detaillist:
 ##
 
 depend:
-	${Q}if [ -f Makefile.bak ]; then \
+	${Q} if [ -f Makefile.bak ]; then \
 		echo "Makefile.bak exists, remove or move it out of the way"; \
 		exit 1; \
 	else \
 	    true; \
 	fi
-	-${Q}rm -f makedep.out
-	${Q}echo forming cscript dependency list
-	${Q}echo "# DO NOT DELETE THIS LINE -- make depend depends on it." > \
+	-${Q} rm -f makedep.out
+	${Q} echo forming cscript dependency list
+	${Q} echo "# DO NOT DELETE THIS LINE -- make depend depends on it." > \
 		makedep.out
-	${Q}echo "" >> makedep.out
-	${Q}for i in ${SCRIPT}; do \
+	${Q} echo "" >> makedep.out
+	${Q} for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo "$$i: $$i.calc"; \
-		echo '	rm -f $$@'; \
-		echo '	$${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!$${BINDIR}/calc:" $$?>$$@'; \
-		echo '	$${CHMOD} +x $$@'; \
+		echo '	@rm -f $$@'; \
+		echo '	@$${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!$${BINDIR}/calc:" $$?>$$@'; \
+		echo '	@$${CHMOD} +x $$@'; \
+	    fi; \
 	done >> makedep.out
-	${Q}echo sample dependency list formed
-	${Q}echo forming new cscript/Makefile
-	-${Q}rm -f Makefile.bak
-	${Q}mv Makefile Makefile.bak
-	${Q}${SED} -n '1,/^# DO NOT DELETE THIS LINE/p' Makefile.bak > Makefile
-	${Q}echo "" >> Makefile
-	${Q}${SED} -n '3,$$p' makedep.out >> Makefile
-	-${Q}rm -f makedep.out
-	-${Q}if cmp -s Makefile.bak Makefile; then \
+	${Q} echo sample dependency list formed
+	${Q} echo forming new cscript/Makefile
+	-${Q} rm -f Makefile.bak
+	${Q} mv Makefile Makefile.bak
+	${Q} ${SED} -n '1,/^# DO NOT DELETE THIS LINE/p' Makefile.bak > Makefile
+	${Q} echo "" >> Makefile
+	${Q} ${SED} -n '3,$$p' makedep.out >> Makefile
+	-${Q} rm -f makedep.out
+	-${Q} if ${CMP} -s Makefile.bak Makefile; then \
 		echo 'sample Makefile was already up to date'; \
 		mv -f Makefile.bak Makefile; \
 	else \
@@ -199,49 +324,131 @@ depend:
 		fi; \
 	fi
 
+##
+#
+# rpm rules
+#
+##
+
+echo_inst_files:
+	${Q} for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${SCRIPTDIR}/$$i; \
+	    fi; \
+	done
+
+##
+#
+# Utility rules
+#
+##
+
 clean:
 	-rm -f makedep.out
 
 clobber:
-	-rm -f ${SCRIPT}
+	-rm -f ${TARGETS}
 
+# install everything
+#
+# NOTE: Keep the uninstall rule in reverse order to the install rule
+#
 install: all
-	-${Q}if [ ! -d ${BINDIR} ]; then \
-		echo mkdir ${BINDIR}; \
-		mkdir ${BINDIR}; \
+	-${Q} if [ ! -d $T${BINDIR} ]; then \
+	    echo mkdir $T${BINDIR}; \
+	    mkdir $T${BINDIR}; \
+	    if [ ! -d "$T${BINDIR}" ]; then \
+		echo mkdir -p "$T${BINDIR}"; \
+		mkdir -p "$T${BINDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${BINDIR}; \
+	    ${CHMOD} 0755 $T${BINDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${SCRIPTDIR} ]; then \
-		echo mkdir ${SCRIPTDIR}; \
-		mkdir ${SCRIPTDIR}; \
+	-${Q} if [ ! -d $T${SCRIPTDIR} ]; then \
+	    echo mkdir $T${SCRIPTDIR}; \
+	    mkdir $T${SCRIPTDIR}; \
+	    if [ ! -d "$T${SCRIPTDIR}" ]; then \
+		echo mkdir -p "$T${SCRIPTDIR}"; \
+		mkdir -p "$T${SCRIPTDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${SCRIPTDIR}; \
+	    ${CHMOD} 0755 $T${SCRIPTDIR}; \
 	else \
 	    true; \
 	fi
-	${Q}for i in ${SCRIPT}; do \
-		echo rm -f ${SCRIPTDIR}/$$i; \
-		rm -f ${SCRIPTDIR}/$$i; \
-		echo cp $$i ${SCRIPTDIR}; \
-		cp $$i ${SCRIPTDIR}; \
-		echo ${CHMOD} 0555 ${SCRIPTDIR}/$$i; \
-		${CHMOD} 0555 ${SCRIPTDIR}/$$i; \
+	${Q} for i in ${SCRIPT} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s $$i $T${SCRIPTDIR}/$$i; then \
+		true; \
+	    else \
+		rm -f $T${SCRIPTDIR}/$$i.new; \
+		cp -f $$i $T${SCRIPTDIR}/$$i.new; \
+		${CHMOD} 0555 $T${SCRIPTDIR}/$$i.new; \
+		mv -f $T${SCRIPTDIR}/$$i.new $T${SCRIPTDIR}/$$i; \
+		echo "installed $T${SCRIPTDIR}/$$i"; \
+	    fi; \
+	done
+
+# Try to remove everything that was installed
+#
+# NOTE: Keep the uninstall rule in reverse order to the install rule
+#
+uninstall:
+	-${Q} for i in ${SCRIPT} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if [ -f "$T${SCRIPTDIR}/$$i" ]; then \
+	    	rm -f "$T${SCRIPTDIR}/$$i"; \
+		if [ -f "$T${SCRIPTDIR}/$$i" ]; then \
+		   echo "cannot uninstall $T${SCRIPTDIR}/$$i"; \
+		else \
+		   echo "uninstalled $T${SCRIPTDIR}/$$i"; \
+		fi; \
+	    fi; \
+	done
+	-${Q} for i in ${SCRIPTDIR} ${BINDIR}; do \
+	    if [ -d "$T$$i" ]; then \
+		rmdir "$T$$i" 2>/dev/null; \
+		echo "cleaned up $T$$i"; \
+	    fi; \
 	done
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.
 
+4dsphere: 4dsphere.calc
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
+fproduct: fproduct.calc
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 mersenne: mersenne.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 piforever: piforever.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 plus: plus.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
+powerterm: powerterm.calc
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 simple: simple.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
+square: square.calc
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@

cscript/README

@@ -19,6 +19,23 @@ For more info, see:
 
 =-=
 
+4dsphere
+
+    Determine if 6 points lie on the surface of a 4-dimensional sphere in R^4.
+
+    4dsphere x0 y0 z0 w0   x1 y1 z1 w1   ...   x5 y5 z5 w5
+
+	x0 y0 z0 w0     point 0 in R^4
+	x1 y1 z1 w1     point 1 in R^4
+	...             ...
+	x5 y5 z5 w5     point 5 in R^4
+
+
+fproduct filename term ...
+
+    Write the big Endian product of terms to a file.  Use - for stdout.
+
+
 mersenne exp
 
     Print the value of 2^exp-1.
@@ -34,6 +51,12 @@ plus arg ...
     Print the sum of 1 or more arguments.
 
 
+powerterm [base_limit] value
+
+    Print the value as a sum (or difference) of powers of integers up
+    to and including powers <= base_limit.  By default, base_limit is 10000.
+
+
 simple
 
     A trivial example of a calc shell script.
@@ -54,8 +77,8 @@ simple
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.4 $
-## @(#) $Id: README,v 29.4 2000/06/07 14:02:59 chongo Exp $
+## @(#) $Revision: 29.10 $
+## @(#) $Id: README,v 29.10 2001/06/10 19:34:40 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/README,v $
 ##
 ## Under source code control:	1999/12/17 10:23:40

cscript/fproduct.calc

@@ -0,0 +1,88 @@
+#!/usr/local/src/cmd/calc/calc -q -s -f
+/*
+ * fproduct - write the big Endian product of terms to a file
+ *
+ * usage:
+ *	fproduct filename term [term ...]
+ *
+ *	filename	where to write the product, use - for stdout
+ *	term ...	terms to multiply
+ *
+ * Copyright (C) 2001  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: fproduct.calc,v 29.2 2001/06/06 09:06:29 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/fproduct.calc,v $
+ *
+ * Under source code control:   2001/04/07 20:13:11
+ * File existed as early as:    2001
+ *
+ * chongo <was here> /\oo/\     http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)        http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+/*
+ * parse args
+ */
+argc = argv();
+if (argc < 2) {
+    fprintf(files(2), "usage: %s term [term ...]\n", argv(0));
+    exit;
+}
+filename = argv(1);
+
+
+/*
+ * build the product
+ */
+product = 1;
+for (i=2; i < argc; ++i) {
+    product *= eval(argv(i));
+}
+product = abs(product);
+
+
+/*
+ * open the file for writing, "-" is stdout
+ */
+if (filename == "-") {
+    fd = files(1);
+} else {
+    fd = fopen(filename, "w");
+    if (!isfile(fd)) quit "be2file: cannot open file for writing";
+}
+
+
+/*
+ * write the octets to the file
+ *
+ * The most significant bits of the integer become the first file octets.
+ */
+if (product > 0) {
+    octlen = int((highbit(product)+8) / 8);
+    for (i=octlen-1; i >= 0; --i) {
+	fputc(fd, char(product >> (i*8)));
+    }
+}
+
+
+/*
+ * cleanup
+ */
+if (filename != "-") {
+    fclose(fd);
+}

cscript/mersenne.calc

@@ -1,4 +1,4 @@
-#!/usr/local/src/cmd/calc/calc -S
+#!/usr/local/src/cmd/calc/calc -q -s -f
 #
 # mersenne - print the value of a mersenne number
 #
@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.2 $
-# @(#) $Id: mersenne.calc,v 29.2 2000/06/07 14:02:59 chongo Exp $
+# @(#) $Revision: 29.3 $
+# @(#) $Id: mersenne.calc,v 29.3 2000/12/15 14:56:54 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/mersenne.calc,v $
 #
 # Under source code control:	1999/11/30 00:09:01;
@@ -35,13 +35,19 @@
 /*
  * parse args
  */
-if (argv() != 1) {
+if (argv() != 2) {
 	/* we include the name of this script in the error message */
 	fprintf(files(2), "usage: %s exp\n", config("program"));
 	abort "wrong number of args";
 }
 
+global n = eval(argv(1));
+
+if (!isint(n) || n <= 0) {
+	quit "Argument to be a positive integer";
+}
+
 /*
  * print the decimal value of 2^n-1
  */
-print "2^": argv(0) : "-1 =", 2^eval(argv(0))-1;
+print "2^": n : "-1 =", 2^n-1;

cscript/piforever.calc

@@ -1,4 +1,4 @@
-#!/usr/local/src/cmd/calc/calc -S
+#!/usr/local/src/cmd/calc/calc -q -f
 #
 # piforever - print digits of pi forever (or as long as your mem/cpu allow)
 #
@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.2 $
-# @(#) $Id: piforever.calc,v 29.2 2000/06/07 14:02:59 chongo Exp $
+# @(#) $Revision: 29.3 $
+# @(#) $Id: piforever.calc,v 29.3 2000/12/15 14:56:54 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/piforever.calc,v $
 #
 # Under source code control:	1999/11/30 00:11:36

cscript/plus.calc

@@ -1,4 +1,4 @@
-#!/usr/local/src/cmd/calc/calc -S
+#!/usr/local/src/cmd/calc/calc -q -s -f
 #
 # plus - add two or more arguments together
 #
@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.2 $
-# @(#) $Id: plus.calc,v 29.2 2000/06/07 14:02:59 chongo Exp $
+# @(#) $Revision: 29.3 $
+# @(#) $Id: plus.calc,v 29.3 2000/12/15 14:56:54 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/plus.calc,v $
 #
 # Under source code control:	1999/11/29 10:22:37
@@ -35,19 +35,19 @@
 /*
  * parse args
  */
-if (argv() < 1) {
+if (argv() < 2) {
 	/* we include the name of this script in the error message */
 	fprintf(files(2), "usage: %s value ...\n", config("program"));
 	abort "not enough args";
 }
 
 /*
- * print the sum of the 2 args
+ * print the sum of the args
  *
  * Since args are strings, we must eval them before using them numerically.
  */
 sum = 0;
-for (i=0; i < argv(); ++i) {
+for (i=1; i < argv(); ++i) {
 	sum += eval(argv(i));
 }
 print sum;

cscript/powerterm.calc

@@ -0,0 +1,185 @@
+#!/usr/local/src/cmd/calc/calc -q -s -f
+/*
+ * powerterm - print the argument as a sum of powers of integers
+ *
+ * usage:
+ *      powerterm [base_limit] value
+ *
+ *	base_limit	largest base we will consider (def: 10000)
+ *      value		value to convert into sums of powers of integers
+ *
+ * Copyright (C) 2001  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the powerterm of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: powerterm.calc,v 29.6 2001/06/06 09:06:29 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/powerterm.calc,v $
+ *
+ * Under source code control:   2001/04/24 23:49:11
+ * File existed as early as:    2001
+ *
+ * chongo <was here> /\oo/\     http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)        http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+/*
+ * parse args
+ */
+config("verbose_quit", 0),;
+base_lim = 10000;		/* default: highest base we will consider */
+if (argv() < 2 || argv() > 3) {
+    fprintf(files(2), "usage: %s [base_limit] value\n", argv(0));
+    exit;
+}
+if (argv() == 3) {
+    x = eval(argv(2));
+    base_lim = eval(argv(1));
+} else {
+    x = eval(argv(1));
+}
+if (! isint(x)) {
+    fprintf(files(2), "%s: value must be an integer\n");
+    exit;
+}
+if (! isint(base_lim)) {
+    fprintf(files(2), "%s: base limit must be an integer\n");
+    exit;
+}
+if (base_lim <= 1) {
+    fprintf(files(2), "%s: base limit is too small\n");
+    exit;
+}
+++base_lim;
+
+/*
+ * setup loop variables
+ */
+term = 0;			/* number of powerterm found */
+
+/*
+ * log constants
+ */
+if (base_lim <= 2^20+1) {		/* 2^20 requires ~96 Megs of memory */
+    mat lni[base_lim];			/* log of integers */
+    for (i=2; i < base_lim; ++i) {
+	lni[i] = ln(i);
+    }
+    have_lni = 1;			/* have lni[x] array */
+} else {
+    mat lni[1];				/* not used */
+    have_lni = 0;			/* base_lim too large for array */
+}
+
+/*
+ * remove nestest powers
+ */
+while (abs(x) >= base_lim) {
+
+    /*
+     * look for the nearest power
+     */
+    lnx = ln(abs(x));			/* log of the remaining co-factor */
+    closest = 0.5;
+    base = 1;
+    exponent = 0;
+    if (have_lni) {
+
+	/*
+	 * use pre-calculated log array when looking for the nearest power
+	 */
+	for (i = 2; i < base_lim; ++i) {
+
+	    /*
+	     * determine exponent closeness to an integer
+	     */
+	    ex = lnx / lni[i];
+	    power = int(ex + 0.5);
+	    diff = ex - power;
+
+	    /*
+	     * look for a closer power
+	     */
+	    if (abs(diff) < closest) {
+		closest = abs(diff);
+		base = i;
+		exponent = power;
+	    }
+	}
+
+    } else {
+
+	/*
+	 * re-calculate logs when looking for the nearest power
+	 */
+	for (i = 2; i < base_lim; ++i) {
+
+	    /*
+	     * determine exponent closeness to an integer
+	     */
+	    ex = lnx / ln(i);
+	    power = int(ex + 0.5);
+	    diff = ex - power;
+
+	    /*
+	     * look for a closer power
+	     */
+	    if (abs(diff) < closest) {
+		closest = abs(diff);
+		base = i;
+		exponent = power;
+	    }
+	}
+    }
+
+    /*
+     * output current term and then subtract it
+     */
+    if (x != 0) {
+	if (x < 0) {
+	    print "-",;
+	} else if (term > 0) {
+	    print "+",;
+	}
+	if (exponent > 1) {
+	    print base: "^": exponent,;
+	} else {
+	    print base,;
+	}
+    }
+
+    /*
+     * subtract (or add) this near power
+     */
+    if (x < 0) {
+	x = x + base^exponent;
+    } else {
+	x = x - base^exponent;
+    }
+    ++term;
+}
+
+/*
+ * print the final term
+ */
+if (x < 0) {
+    print "-", -x;
+} else if (x > 0) {
+    print "+", x;
+} else {
+    print "";
+}
+exit;

cscript/simple.calc

@@ -1,4 +1,4 @@
-#!/usr/local/src/cmd/calc/calc -S
+#!/usr/local/src/cmd/calc/calc -q -f
 #
 # simple - an example of a simple calc shell script
 #
@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.2 $
-# @(#) $Id: simple.calc,v 29.2 2000/06/07 14:02:59 chongo Exp $
+# @(#) $Revision: 29.3 $
+# @(#) $Id: simple.calc,v 29.3 2000/12/15 14:56:54 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/simple.calc,v $
 #
 # Under source code control:	1999/11/29 10:22:37
@@ -32,4 +32,4 @@
 /*
  * This is an example of a simple calc shell script.
  */
-print "The simple calc shell script works!"
+print "This simple calc shell script works!"

cscript/square.calc

@@ -0,0 +1,65 @@
+#!/usr/local/src/cmd/calc/calc -q -f
+#
+# sqaure - print the squares of input values
+#
+# Copyright (C) 2000  Ernest Bowen
+#
+# Calc is open software; you can redistribute it and/or modify it under
+# the terms of the version 2.1 of the GNU Lesser General Public License
+# as published by the Free Software Foundation.
+#
+# Calc is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU Lesser General
+# Public License for more details.
+#
+# A copy of version 2.1 of the GNU Lesser General Public License is
+# distributed with calc under the filename COPYING-LGPL.  You should have
+# received a copy with calc; if not, write to Free Software Foundation, Inc.
+# 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+#
+# @(#) $Revision: 29.3 $
+# @(#) $Id: square.calc,v 29.3 2000/12/17 14:31:58 chongo Exp $
+# @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/square.calc,v $
+#
+# Under source code control:	2000/12/15 06:52:01
+# File existed as early as:	2000
+#
+# Share and enjoy!  :-) http://www.isthe.com/chongo/tech/comp/calc/
+
+# Usage:
+#
+#       From the shell:
+#
+#               ./square
+#               cat file | ./square
+#               echo "123" | ./square
+#
+#       Within calc:
+#
+#               > read square
+#
+#  With input from a terminal, there is no prompt but each non-empty
+#  line of input is evaluated as a calc expression and if it can be
+#  calculated, the square of the value of that expression is displayed.
+#  Execution stops when an empty line is input.
+#
+#  From the shell:
+#
+#       ./square
+#
+#  The following shows lines of input followed by output:
+#
+#       1234
+#               1522756
+#       ln(2)
+#               ~.48045301391820142467
+#       config("mode","frac"), bernoulli(10)
+#               25/4356
+#       config("mode", "hex"), 0xff
+#               0xfe01
+#
+
+global s;
+while ((s = prompt("")))
+	print "\t":eval(s)^2;

custom.c

@@ -1,7 +1,7 @@
 /*
  * custom - interface for custom software and hardware interfaces
  *
- * Copyright (C) 1999  Landon Curt Noll
+ * Copyright (C) 1999-2006  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: custom.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: custom.c,v 29.6 2006/05/19 15:26:10 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/custom.c,v $
  *
  * Under source code control:	1997/03/03 04:53:08
@@ -34,11 +34,10 @@
 #include "value.h"
 #include "custom.h"
 
+#include <stdio.h>
 
 #if defined(CUSTOM)
 
-#include <stdio.h>
-
 #include "calc.h"
 
 #include "have_string.h"
@@ -52,7 +51,7 @@
 
 #endif /* CUSTOM */
 
-int allow_custom = FALSE;	 /* TRUE => custom builtins allowed */
+BOOL allow_custom = FALSE;	 /* TRUE => custom builtins allowed */
 
 
 /*
@@ -190,7 +189,7 @@ customhelp(char *name)
 	/*
 	 * form the custom help name
 	 */
-	customname = (char *)malloc(sizeof("custhelp")+strlen(name)+1);
+	customname = (char *)malloc(sizeof("custhelp")+1+strlen(name)+1);
 	if (customname == NULL) {
 		math_error("bad malloc of customname");
 		/*NOTREACHED*/

custom.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: custom.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: custom.h,v 29.3 2004/02/25 23:54:40 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/custom.h,v $
  *
  * Under source code control:	1997/03/03 04:53:08
@@ -72,7 +72,7 @@ struct custom {
  * These are the required interfaces.  The dummy.c stubs these interfaces too.
  */
 extern VALUE custom(char*, int, VALUE**);	/* master custom interface */
-extern int allow_custom;		/* TRUE => custom builtins allowed */
+extern BOOL allow_custom;		/* TRUE => custom builtins allowed */
 extern void showcustom(void);		/* print custom functions */
 extern void customhelp(char *);		/* direct custom help */
 extern CONST struct custom cust[];	/* custom interface table */

custom/HOW_TO_ADD

@@ -36,13 +36,14 @@ Step 1: Do some background work
     anything in Steps 2 and beyond!
 
     If you are not familiar with calc internals, we recommend that
-    you look at some examples of custom functions.  Check out
+    you look at some examples of custom functions.  Look at the
     the following source files:
 
 	custom.c
-	custom/custom.h
+	custom.h
 	custom/custtbl.c
 	custom/c_*.[ch]
+	custom/*.cal
 	help/custom		(or run:  calc help custom)
 
     You would be well advised to look at a more recent calc source
@@ -83,14 +84,15 @@ Step 3: Document your custom function
 
     Take a look at one of the example custom help files:
 
-	devnull
-	argv
-	help
-	sysinfo
+	custom/devnull
+	custom/argv
+	custom/help
+	custom/sysinfo
 
     You can save time by using one of the custom help files
     as a template.  Copy one of these files to your own help file:
 
+	cd custom
 	cp sysinfo curds
 
     and edit it accordingly.
@@ -107,15 +109,16 @@ Step 4: Write your test code
     test code will be an import part of your submission.  Your test
     code will also service as additional for your custom function.
 
-    Coops ... we said we would stop preaching, sorry about that ...
+    Oops ... we said we would stop preaching, sorry about that ...
 
     You can use one of the following as a template:
 
-	argv.cal
-	halflen.cal
+	custom/argv.cal
+	custom/halflen.cal
 
     Copy one of these to your own file:
 
+	cd custom
 	cp halflen.cal curds.cal
 
     and exit it accordingly.  In particular you will want to:
@@ -152,6 +155,7 @@ Step 5: Write your custom function
     We recommend that you use one of the c_*.c files as a template.
     Copy an appropriate file to your file:
 
+	cd custom
 	cp c_argv.c u_curds.c
 
     Before you edit it, you should note that there are several important
@@ -179,9 +183,6 @@ Step 5: Write your custom function
 		VALUE
 		u_curds(char *name, int count, VALUE **vals)
 
-	   The /*ARGSUSED*/ may be needed if you do not make use
-	   of all 3 function parameters.
-
 	   The 3 args are passed in by the custom interface
 	   and have the following meaning:
 
@@ -222,6 +223,15 @@ Step 5: Write your custom function
 			    vals[1]  points to	b
 			    vals[2]  points to	c
 
+	   NOTE: If you do not use any of the 3 function parameters,
+	   then you should declare that function parameter to be UNUSED.
+	   For example, if the count and vals parameters were not used
+	   in your custom function, then your declaraction should be:
+
+		/*ARGSUSED*/
+		VALUE
+		u_curds(char *name, int UNUSED count, VALUE UNUSED **vals)
+
 	c) The return value is the function must be a VALUE.
 
 	   The typical way to form a VALUE to return is by declaring
@@ -239,6 +249,8 @@ Step 5: Write your custom function
 		#include "../value.h"
 		#include "custom.h"
 
+		#include "../have_unused.h"
+
 	    Typically these will be included just below any system
 	    includes and just below the #if defined(CUSTOM) line.
 
@@ -362,7 +374,7 @@ Step 6: Register the function in the custom interface table
 
     To allow the custom() builtin to transfer control to your function,
     you need to add an entry into the CONST struct custom cust table
-    found in custtbl.c:
+    found in custom/custtbl.c:
 
 	/*
 	 * custom interface table
@@ -482,10 +494,10 @@ Step 6: Register the function in the custom interface table
 	extern VALUE u_curds(char*, int, VALUE**);
 
 
-Step 7: Add the required information to the Makefile
+Step 7: Add the required information to the custom/Makefile
 
     The calc test script, curds.cal, should be added to the
-    CUSTOM_CALC_FILES Makefile variable:
+    CUSTOM_CALC_FILES Makefile variable found in custom/Makefile:
 
 	CUSTOM_CALC_FILES= argv.cal halflen.cal curds.cal
 
@@ -619,7 +631,7 @@ Step 12: Contribute
     and consider submitting your custom function for possible
     inclusion in later versions of calc.
 
-## Copyright (C) 1999  Landon Curt Noll
+## Copyright (C) 1999-2004  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -635,8 +647,8 @@ Step 12: Contribute
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: HOW_TO_ADD,v 29.2 2000/06/07 14:03:03 chongo Exp $
+## @(#) $Revision: 29.5 $
+## @(#) $Id: HOW_TO_ADD,v 29.5 2005/10/18 11:18:34 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/HOW_TO_ADD,v $
 ##
 ## Under source code control:	1997/03/10 03:03:21

custom/Makefile

@@ -2,7 +2,7 @@
 #
 # custom - makefile for calc custom routines
 #
-# Copyright (C) 1999  Landon Curt Noll
+# Copyright (C) 1999,2004  Landon Curt Noll
 #
 # Calc is open software; you can redistribute it and/or modify it under
 # the terms of the version 2.1 of the GNU Lesser General Public License
@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.2 $
-# @(#) $Id: Makefile,v 29.2 2000/06/07 14:03:03 chongo Exp $
+# @(#) $Revision: 29.26 $
+# @(#) $Id: Makefile,v 29.26 2006/09/18 00:13:59 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/Makefile,v $
 #
 # Under source code control:	1997/03/09 02:28:54
@@ -40,13 +40,13 @@
 #
 # Put your custom calc resource files here.
 #
-CUSTOM_CALC_FILES= argv.cal halflen.cal pzasusb8.cal
+CUSTOM_CALC_FILES= argv.cal halflen.cal pzasusb8.cal pmodm127.cal
 
 # The custom help files to install
 #
 # Put your custom help files here.
 #
-CUSTOM_HELP= argv devnull help sysinfo pzasusb8
+CUSTOM_HELP= argv devnull help sysinfo pzasusb8 pmodm127
 
 # Any .h files that are needed by programs that use libcustcalc.a
 #
@@ -62,7 +62,7 @@ CUSTOM_H_SRC=
 #
 # Put your custom .c files here.
 #
-CUSTOM_SRC= c_argv.c c_devnull.c c_help.c c_sysinfo.c c_pzasusb8.c
+CUSTOM_SRC= c_argv.c c_devnull.c c_help.c c_sysinfo.c c_pzasusb8.c c_pmodm127.c
 
 # Any .o files that are needed by program that use libcustcalc.a.
 # Don't put ${REQUIRED_OBJ} files in this list.
@@ -71,7 +71,7 @@ CUSTOM_SRC= c_argv.c c_devnull.c c_help.c c_sysinfo.c c_pzasusb8.c
 #
 # Put your custom .o files here.
 #
-CUSTOM_OBJ= c_argv.o c_devnull.o c_help.o c_sysinfo.o c_pzasusb8.o
+CUSTOM_OBJ= c_argv.o c_devnull.o c_help.o c_sysinfo.o c_pzasusb8.o c_pmodm127.o
 
 ##############################################################################
 #-=-=-=-=-=-=- Defaults in case you want to build from this dir -=-=-=-=-=-=-#
@@ -88,26 +88,120 @@ CUSTOM_OBJ= c_argv.o c_devnull.o c_help.o c_sysinfo.o c_pzasusb8.o
 #Q=
 Q=@
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
+####
+
+# Where the system include (.h) files are kept
 #
-# where to install things
+# For DJGPP, select:
 #
-# ${TOPDIR} is the directory under which the calc directory will be placed.
-# ${LIBDIR} is where the *.cal, *.h, *.a, bindings and help dir are installed.
-# ${HELPDIR} is where the help directory is installed.
-# ${CUSTOMLIBDIR} is where custom lib files are installed.
-# ${CUSTOMHELPDIR} is where custom help files are installed.
+#	INCDIR= /dev/env/DJDIR/include
 #
-TOPDIR= /usr/local/lib
-#TOPDIR= /usr/lib
-#TOPDIR= /usr/libdata
-#TOPDIR= /usr/contrib/lib
+# If in doubt, set:
 #
-LIBDIR= ${TOPDIR}/calc
-HELPDIR= ${LIBDIR}/help
-CUSTOMLIBDIR= ${LIBDIR}/custom
-CUSTOMHELPDIR= ${HELPDIR}/custhelp
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
+SCRIPTDIR= ${BINDIR}/cscript
+
+# T - top level directory under which calc will be installed
+#
+# The calc install is performed under $T, the calc build is
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
+#
+# If $T is empty, calc is installed under /, which is the same
+# top of tree for which it was built.  If $T is non-empty, then
+# calc is installed under $T, as if one had to chroot under
+# $T for calc to operate.
+#
+# If in doubt, use T=
+#
+T=
 
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
@@ -256,7 +350,7 @@ REQUIRED_SRC= custtbl.c
 #
 REQUIRED_OBJ= custtbl.o
 
-# These .h files are installed under ${CUSTOMLIBDIR} by the install rule.
+# These .h files are installed under ${CUSTOMCALDIR} by the install rule.
 #
 INSTALL_H_SRC= ${CUSTOM_H_SRC}
 
@@ -288,9 +382,13 @@ DISTLIST= ${CUSTCALC_SRC} ${CUSTOM_CALC_FILES} ${CUSTOM_HELP} \
 #
 CALCLIBLIST= ${CUSTCALC_SRC} ${INSTALL_H_SRC} ${MAKE_FILE} HOW_TO_ADD
 
+# This is the custom .a link library that is build
+#
+CALC_LIBCUSTOM= libcustcalc.a
+
 # complete list of targets
 #
-TARGETS= libcustcalc.a ${CUSTCALC_OBJ}
+TARGETS= ${CALC_LIBCUSTOM} ${CUSTCALC_OBJ}
 
 # required vars
 #
@@ -303,6 +401,7 @@ SED= sed
 MAKEDEPEND= makedepend
 CHMOD= chmod
 SORT= sort
+CMP= cmp
 
 ##
 #
@@ -313,7 +412,7 @@ SORT= sort
 all: ${TARGETS} ${INSTALL_H_SRC} ${CUSTOM_CALC_FILES} \
 	${CUSTOM_HELP} ${MAKE_FILE} .all
 
-libcustcalc.a: ${CUSTCALC_OBJ} ${MAKE_FILE} ../Makefile
+libcustcalc.a: ${CUSTCALC_OBJ} ${MAKE_FILE} ../${MAKE_FILE}
 	-rm -f libcustcalc.a
 	ar qc libcustcalc.a ${CUSTCALC_OBJ}
 	${RANLIB} libcustcalc.a
@@ -353,15 +452,17 @@ c_sysinfo.o: c_sysinfo.c ${MAKE_FILE}
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q} for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo custom/$$i; \
+	    fi; \
 	done
 
 distdir:
-	${Q}echo custom
+	${Q} echo custom
 
 calcliblist: ${CALCLIBLIST}
-	${Q}for i in ${CALCLIBLIST} /dev/null; do \
+	${Q} for i in ${CALCLIBLIST} /dev/null; do \
 	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo custom/$$i; \
 	    fi; \
@@ -380,21 +481,23 @@ calcliblist: ${CALCLIBLIST}
 ##
 
 depend:
-	${Q}if [ -f Makefile.bak ]; then \
+	${Q} if [ -f Makefile.bak ]; then \
 		echo "Makefile.bak exists, remove or move it out of the way"; \
 		exit 1; \
 	else \
 	    true; \
 	fi
-	${Q}echo forming custom/skel
-	-${Q}rm -rf skel
-	${Q}mkdir skel
-	${Q}mkdir skel/custom
-	-${Q}for i in ${C_SRC}; do \
+	${Q} echo forming custom/skel
+	-${Q} rm -rf skel
+	${Q} mkdir skel
+	${Q} mkdir skel/custom
+	-${Q} for i in ${C_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		${SED} -n '/^#[	 ]*include[	 ]*"/p' \
 		    "$$i" > "skel/custom/$$i"; \
+	    fi; \
 	done
-	-${Q}for i in /dev/null ${H_SRC}; do \
+	-${Q} for i in ${H_SRC} /dev/null; do \
 		if [ "$$i" = "/dev/null" ]; then \
 		    continue; \
 		fi; \
@@ -405,8 +508,14 @@ depend:
 		    >> "skel/custom/$$i"; \
 		echo '#endif /* '"$$tag"' */' >> "skel/custom/$$i"; \
 	done
-	${Q}(cd ..; ${MAKE} hsrc)
-	${Q}for i in `cd ..; ${MAKE} h_list`; do \
+	${Q} (cd ..; ${MAKE} hsrc)
+	${Q} for i in `cd ..; ${MAKE} h_list 2>&1 | \
+			     ${SED} -e '/Entering directory/d' \
+				    -e '/Nothing to be done/d' \
+				    -e '/Leaving directory/d'` /dev/null; do \
+		if [ "$$i" = "/dev/null" ]; then \
+		    continue; \
+		fi; \
 		tag="`echo $$i | ${SED} 's/[\.+,:]/_/g'`"; \
 		echo "#if !defined($$tag)" > "skel/$$i"; \
 		echo "#define $$tag" >> "skel/$$i"; \
@@ -414,24 +523,27 @@ depend:
 		    >> "skel/$$i"; \
 		echo '#endif /* '"$$tag"' */' >> "skel/$$i"; \
 	done
-	-${Q}rm -f skel/custom/makedep.out
-	${Q}echo custom/skel formed
-	${Q}echo forming custom dependency list
-	${Q}echo "# DO NOT DELETE THIS LINE -- make depend depends on it." > \
+	-${Q} rm -f skel/custom/makedep.out
+	${Q} echo custom/skel formed
+	${Q} echo forming custom dependency list
+	${Q} echo "# DO NOT DELETE THIS LINE -- make depend depends on it." > \
 	    skel/custom/makedep.out
-	${Q}cd skel/custom; ${MAKEDEPEND} -w 1 -m -f makedep.out ${C_SRC}
-	-${Q}for i in ${C_SRC}; do \
+	${Q} cd skel/custom; ${MAKEDEPEND} -w 1 -f makedep.out ${C_SRC}
+	-${Q} for i in ${C_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo "$$i" | ${SED} 's/^\(.*\)\.c/\1.o: \1.c/'; \
+	    fi; \
 	done >> skel/custom/makedep.out
-	${Q}echo custom dependency list formed
-	${Q}echo forming new custom/Makefile
-	-${Q}rm -f Makefile.bak
-	${Q}mv Makefile Makefile.bak
-	${Q}${SED} -n '1,/^# DO NOT DELETE THIS LINE/p' Makefile.bak > Makefile
-	${Q}echo "" >> Makefile
-	${Q}${SED} -n '3,$$p' skel/custom/makedep.out | ${SORT} -u >> Makefile
-	-${Q}rm -rf skel
-	-${Q}if cmp -s Makefile.bak Makefile; then \
+	${Q} echo custom dependency list formed
+	${Q} echo forming new custom/Makefile
+	-${Q} rm -f Makefile.bak
+	${Q} mv Makefile Makefile.bak
+	${Q} ${SED} -n '1,/^# DO NOT DELETE THIS LINE/p' Makefile.bak > Makefile
+	${Q} echo "" >> Makefile
+	${Q} ${SED} -n '3,$$p' skel/custom/makedep.out | \
+		LANG=C ${SORT} -u >> Makefile
+	-${Q} rm -rf skel
+	-${Q} if ${CMP} -s Makefile.bak Makefile; then \
 		echo 'custom Makefile was already up to date'; \
 		mv -f Makefile.bak Makefile; \
 	else \
@@ -446,6 +558,34 @@ depend:
 		fi; \
 	fi
 
+##
+#
+# rpm rules
+#
+##
+
+echo_inst_files:
+	${Q} for i in ${INSTALL_H_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CUSTOMINCDIR}/$$i; \
+	    fi; \
+	done
+	${Q} for i in ${CUSTOM_HELP} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CUSTOMHELPDIR}/$$i; \
+	    fi; \
+	done
+	${Q} for i in ${CUSTOM_CALC_FILES} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CUSTOMCALDIR}/$$i; \
+	    fi; \
+	done
+	${Q} for i in ${CALC_LIBCUSTOM} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CUSTOMCALDIR}/$$i; \
+	    fi; \
+	done
+
 ##
 #
 # Utility rules
@@ -457,75 +597,213 @@ clean:
 
 clobber:
 	-rm -f ${TARGETS}
-	rm -f .all Makefile.tmp
+	rm -f .all Makefile.tmp Makefile.bak
 
+# install everything
+#
+# NOTE: Keep the uninstall rule in reverse order to the install rule
+#
 install: all
-	-${Q}if [ ! -d ${TOPDIR} ]; then \
-		echo mkdir ${TOPDIR}; \
-		mkdir ${TOPDIR}; \
+	-${Q} if [ ! -d $T${INCDIR} ]; then \
+	    echo mkdir $T${INCDIR}; \
+	    mkdir $T${INCDIR}; \
+	    if [ ! -d "$T${INCDIR}" ]; then \
+		echo mkdir -p "$T${INCDIR}"; \
+		mkdir -p "$T${INCDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${INCDIR}; \
+	    ${CHMOD} 0755 $T${INCDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${LIBDIR} ]; then \
-		echo mkdir ${LIBDIR}; \
-		mkdir ${LIBDIR}; \
+	-${Q} if [ ! -d $T${CALC_SHAREDIR} ]; then \
+	    echo mkdir $T${CALC_SHAREDIR}; \
+	    mkdir $T${CALC_SHAREDIR}; \
+	    if [ ! -d "$T${CALC_SHAREDIR}" ]; then \
+		echo mkdir -p "$T${CALC_SHAREDIR}"; \
+		mkdir -p "$T${CALC_SHAREDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
+	    ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${HELPDIR} ]; then \
-		echo mkdir ${HELPDIR}; \
-		mkdir ${HELPDIR}; \
+	-${Q} if [ ! -d $T${CALC_INCDIR} ]; then \
+	    echo mkdir $T${CALC_INCDIR}; \
+	    mkdir $T${CALC_INCDIR}; \
+	    if [ ! -d "$T${CALC_INCDIR}" ]; then \
+		echo mkdir -p "$T${CALC_INCDIR}"; \
+		mkdir -p "$T${CALC_INCDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CALC_INCDIR}; \
+	    ${CHMOD} 0755 $T${CALC_INCDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${CUSTOMLIBDIR} ]; then \
-		echo mkdir ${CUSTOMLIBDIR}; \
-		mkdir ${CUSTOMLIBDIR}; \
+	-${Q} if [ ! -d $T${HELPDIR} ]; then \
+	    echo mkdir $T${HELPDIR}; \
+	    mkdir $T${HELPDIR}; \
+	    if [ ! -d "$T${HELPDIR}" ]; then \
+		echo mkdir -p "$T${HELPDIR}"; \
+		mkdir -p "$T${HELPDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${HELPDIR}; \
+	    ${CHMOD} 0755 $T${HELPDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${CUSTOMHELPDIR} ]; then \
-		echo mkdir ${CUSTOMHELPDIR}; \
-		mkdir ${CUSTOMHELPDIR}; \
+	-${Q} if [ ! -d $T${CUSTOMCALDIR} ]; then \
+	    echo mkdir $T${CUSTOMCALDIR}; \
+	    mkdir $T${CUSTOMCALDIR}; \
+	    if [ ! -d "$T${CUSTOMCALDIR}" ]; then \
+		echo mkdir -p "$T${CUSTOMCALDIR}"; \
+		mkdir -p "$T${CUSTOMCALDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CUSTOMCALDIR}; \
+	    ${CHMOD} 0755 $T${CUSTOMCALDIR}; \
 	else \
 	    true; \
 	fi
-	${Q}for i in ${INSTALL_H_SRC} /dev/null; do \
-		if [ X$$i = X/dev/null ]; then continue; fi; \
-		echo rm -f ${CUSTOMLIBDIR}/$$i; \
-		rm -f ${CUSTOMLIBDIR}/$$i; \
-		echo cp $$i ${CUSTOMLIBDIR}; \
-		cp $$i ${CUSTOMLIBDIR}; \
-		echo ${CHMOD} 0444 ${CUSTOMLIBDIR}/$$i; \
-		${CHMOD} 0444 ${CUSTOMLIBDIR}/$$i; \
+	-${Q} if [ ! -d $T${CUSTOMHELPDIR} ]; then \
+	    echo mkdir $T${CUSTOMHELPDIR}; \
+	    mkdir $T${CUSTOMHELPDIR}; \
+	    if [ ! -d "$T${CUSTOMHELPDIR}" ]; then \
+		echo mkdir -p "$T${CUSTOMHELPDIR}"; \
+		mkdir -p "$T${CUSTOMHELPDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CUSTOMHELPDIR}; \
+	    ${CHMOD} 0755 $T${CUSTOMHELPDIR}; \
+	else \
+	    true; \
+	fi
+	-${Q} if [ ! -d $T${CUSTOMINCDIR} ]; then \
+	    echo mkdir $T${CUSTOMINCDIR}; \
+	    mkdir $T${CUSTOMINCDIR}; \
+	    if [ ! -d "$T${CUSTOMINCDIR}" ]; then \
+		echo mkdir -p "$T${CUSTOMINCDIR}"; \
+		mkdir -p "$T${CUSTOMINCDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CUSTOMINCDIR}; \
+	    ${CHMOD} 0755 $T${CUSTOMINCDIR}; \
+	else \
+	    true; \
+	fi
+	-${Q} for i in ${INSTALL_H_SRC} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s "$$i" $T${CUSTOMINCDIR}/$$i; then \
+		true; \
+	    else \
+		rm -f $T${CUSTOMINCDIR}/$$i.new; \
+		cp -f $$i $T${CUSTOMINCDIR}/$$i.new; \
+		${CHMOD} 0444 $T${CUSTOMINCDIR}/$$i.new; \
+		mv -f $T${CUSTOMINCDIR}/$$i.new $T${CUSTOMINCDIR}/$$i; \
+		echo "installed $T${CUSTOMINCDIR}/$$i"; \
+	    fi; \
 	done
-	${Q}for i in ${CUSTOM_CALC_FILES}; do \
-		echo rm -f ${CUSTOMLIBDIR}/$$i; \
-		rm -f ${CUSTOMLIBDIR}/$$i; \
-		echo cp $$i ${CUSTOMLIBDIR}; \
-		cp $$i ${CUSTOMLIBDIR}; \
-		echo ${CHMOD} 0444 ${CUSTOMLIBDIR}/$$i; \
-		${CHMOD} 0444 ${CUSTOMLIBDIR}/$$i; \
+	-${Q} for i in ${CUSTOM_CALC_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s $$i $T${CUSTOMCALDIR}/$$i; then \
+		true; \
+	    else \
+		rm -f $T${CUSTOMCALDIR}/$$i.new; \
+		cp -f $$i $T${CUSTOMCALDIR}/$$i.new; \
+		${CHMOD} 0444 $T${CUSTOMCALDIR}/$$i.new; \
+		mv -f $T${CUSTOMCALDIR}/$$i.new $T${CUSTOMCALDIR}/$$i; \
+		echo "installed $T${CUSTOMCALDIR}/$$i"; \
+	    fi; \
 	done
-	${Q}for i in ${CUSTOM_HELP}; do \
-		echo rm -f ${CUSTOMHELPDIR}/$$i; \
-		rm -f ${CUSTOMHELPDIR}/$$i; \
-		echo cp $$i ${CUSTOMHELPDIR}; \
-		cp $$i ${CUSTOMHELPDIR}; \
-		echo ${CHMOD} 0444 ${CUSTOMHELPDIR}/$$i; \
-		${CHMOD} 0444 ${CUSTOMHELPDIR}/$$i; \
+	-${Q} for i in ${CUSTOM_HELP} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s $$i $T${CUSTOMHELPDIR}/$$i; then \
+		true; \
+	    else \
+		rm -f $T${CUSTOMHELPDIR}/$$i.new; \
+		cp -f $$i $T${CUSTOMHELPDIR}/$$i.new; \
+		${CHMOD} 0444 $T${CUSTOMHELPDIR}/$$i.new; \
+		mv -f $T${CUSTOMHELPDIR}/$$i.new $T${CUSTOMHELPDIR}/$$i; \
+		echo "installed $T${CUSTOMHELPDIR}/$$i"; \
+	    fi; \
 	done
-	-${Q}if [ ! -z ${ALLOW_CUSTOM} ]; then \
-		echo "rm -f ${CUSTOMLIBDIR}/libcustcalc.a"; \
-		rm -f ${CUSTOMLIBDIR}/libcustcalc.a; \
-		echo "cp libcustcalc.a ${CUSTOMLIBDIR}/libcustcalc.a"; \
-		cp libcustcalc.a ${CUSTOMLIBDIR}/libcustcalc.a; \
-		echo "${CHMOD} 0644 ${CUSTOMLIBDIR}/libcustcalc.a"; \
-		${CHMOD} 0644 ${CUSTOMLIBDIR}/libcustcalc.a; \
-		echo "${RANLIB} ${CUSTOMLIBDIR}/libcustcalc.a"; \
-		${RANLIB} ${CUSTOMLIBDIR}/libcustcalc.a; \
+	-${Q} if [ ! -z ${ALLOW_CUSTOM} ]; then \
+	    if ${CMP} -s libcustcalc.a $T${CUSTOMCALDIR}/libcustcalc.a; then \
+		true; \
+	    else \
+		rm -f $T${CUSTOMCALDIR}/libcustcalc.a.new; \
+		cp -f libcustcalc.a $T${CUSTOMCALDIR}/libcustcalc.a.new; \
+		${CHMOD} 0644 $T${CUSTOMCALDIR}/libcustcalc.a.new; \
+		mv -f $T${CUSTOMCALDIR}/libcustcalc.a.new \
+		      $T${CUSTOMCALDIR}/libcustcalc.a; \
+		${RANLIB} $T${CUSTOMCALDIR}/libcustcalc.a; \
+		echo "installed $T${CUSTOMCALDIR}/libcustcalc.a"; \
+	    fi; \
 	fi
 
+# Try to remove everything that was installed
+#
+# NOTE: Keep the uninstall rule in reverse order to the install rule
+#
+uninstall:
+	-${Q} if [ -f "$T${CUSTOMCALDIR}/libcustcalc.a" ]; then \
+	    rm -f "$T${CUSTOMCALDIR}/libcustcalc.a"; \
+	    if [ -f "$T${CUSTOMCALDIR}/libcustcalc.a" ]; then \
+		echo "cannot uninstall $T${CUSTOMCALDIR}/libcustcalc.a"; \
+	    else \
+		echo "uninstalled $T${CUSTOMCALDIR}/libcustcalc.a"; \
+	    fi; \
+	fi
+	-${Q} for i in ${CUSTOM_HELP} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if [ -f "$T${CUSTOMHELPDIR}/$$i" ]; then \
+	    	rm -f "$T${CUSTOMHELPDIR}/$$i"; \
+		if [ -f "$T${CUSTOMHELPDIR}/$$i" ]; then \
+		   echo "cannot uninstall $T${CUSTOMHELPDIR}/$$i"; \
+		else \
+		   echo "uninstalled $T${CUSTOMHELPDIR}/$$i"; \
+		fi; \
+	    fi; \
+	done
+	-${Q} for i in ${CUSTOM_CALC_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if [ -f "$T${CUSTOMCALDIR}/$$i" ]; then \
+	    	rm -f "$T${CUSTOMCALDIR}/$$i"; \
+		if [ -f "$T${CUSTOMCALDIR}/$$i" ]; then \
+		   echo "cannot uninstall $T${CUSTOMCALDIR}/$$i"; \
+		else \
+		   echo "uninstalled $T${CUSTOMCALDIR}/$$i"; \
+		fi; \
+	    fi; \
+	done
+	-${Q} for i in ${INSTALL_H_SRC} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if [ -f "$T${CUSTOMINCDIR}/$$i" ]; then \
+	    	rm -f "$T${CUSTOMINCDIR}/$$i"; \
+		if [ -f "$T${CUSTOMINCDIR}/$$i" ]; then \
+		   echo "cannot uninstall $T${CUSTOMINCDIR}/$$i"; \
+		else \
+		   echo "uninstalled $T${CUSTOMINCDIR}/$$i"; \
+		fi; \
+	    fi; \
+	done
+	-${Q} for i in ${CUSTOMINCDIR} ${CUSTOMHELPDIR} ${CUSTOMCALDIR} \
+		    ${HELPDIR} ${CALC_INCDIR} ${CALC_SHAREDIR} ${INCDIR}; do \
+	    if [ -d "$T$$i" ]; then \
+		rmdir "$T$$i" 2>/dev/null; \
+		echo "cleaned up $T$$i"; \
+	    fi; \
+	done
+
 ##
 #
 # make depend stuff
@@ -550,6 +828,7 @@ c_argv.o: ../have_memmv.h
 c_argv.o: ../have_newstr.h
 c_argv.o: ../have_stdlib.h
 c_argv.o: ../have_string.h
+c_argv.o: ../have_unused.h
 c_argv.o: ../longbits.h
 c_argv.o: ../md5.h
 c_argv.o: ../nametype.h
@@ -558,6 +837,7 @@ c_argv.o: ../shs.h
 c_argv.o: ../shs1.h
 c_argv.o: ../string.h
 c_argv.o: ../value.h
+c_argv.o: ../win32dll.h
 c_argv.o: ../zmath.h
 c_argv.o: c_argv.c
 c_devnull.o: ../alloc.h
@@ -575,6 +855,7 @@ c_devnull.o: ../have_memmv.h
 c_devnull.o: ../have_newstr.h
 c_devnull.o: ../have_stdlib.h
 c_devnull.o: ../have_string.h
+c_devnull.o: ../have_unused.h
 c_devnull.o: ../longbits.h
 c_devnull.o: ../md5.h
 c_devnull.o: ../nametype.h
@@ -583,6 +864,7 @@ c_devnull.o: ../shs.h
 c_devnull.o: ../shs1.h
 c_devnull.o: ../string.h
 c_devnull.o: ../value.h
+c_devnull.o: ../win32dll.h
 c_devnull.o: ../zmath.h
 c_devnull.o: c_devnull.c
 c_help.o: ../alloc.h
@@ -600,6 +882,7 @@ c_help.o: ../have_memmv.h
 c_help.o: ../have_newstr.h
 c_help.o: ../have_stdlib.h
 c_help.o: ../have_string.h
+c_help.o: ../have_unused.h
 c_help.o: ../longbits.h
 c_help.o: ../md5.h
 c_help.o: ../nametype.h
@@ -608,8 +891,36 @@ c_help.o: ../shs.h
 c_help.o: ../shs1.h
 c_help.o: ../string.h
 c_help.o: ../value.h
+c_help.o: ../win32dll.h
 c_help.o: ../zmath.h
 c_help.o: c_help.c
+c_pmodm127.o: ../alloc.h
+c_pmodm127.o: ../block.h
+c_pmodm127.o: ../byteswap.h
+c_pmodm127.o: ../calcerr.h
+c_pmodm127.o: ../cmath.h
+c_pmodm127.o: ../config.h
+c_pmodm127.o: ../custom.h
+c_pmodm127.o: ../endian_calc.h
+c_pmodm127.o: ../hash.h
+c_pmodm127.o: ../have_const.h
+c_pmodm127.o: ../have_malloc.h
+c_pmodm127.o: ../have_memmv.h
+c_pmodm127.o: ../have_newstr.h
+c_pmodm127.o: ../have_stdlib.h
+c_pmodm127.o: ../have_string.h
+c_pmodm127.o: ../have_unused.h
+c_pmodm127.o: ../longbits.h
+c_pmodm127.o: ../md5.h
+c_pmodm127.o: ../nametype.h
+c_pmodm127.o: ../qmath.h
+c_pmodm127.o: ../shs.h
+c_pmodm127.o: ../shs1.h
+c_pmodm127.o: ../string.h
+c_pmodm127.o: ../value.h
+c_pmodm127.o: ../win32dll.h
+c_pmodm127.o: ../zmath.h
+c_pmodm127.o: c_pmodm127.c
 c_pzasusb8.o: ../alloc.h
 c_pzasusb8.o: ../block.h
 c_pzasusb8.o: ../byteswap.h
@@ -625,6 +936,7 @@ c_pzasusb8.o: ../have_memmv.h
 c_pzasusb8.o: ../have_newstr.h
 c_pzasusb8.o: ../have_stdlib.h
 c_pzasusb8.o: ../have_string.h
+c_pzasusb8.o: ../have_unused.h
 c_pzasusb8.o: ../longbits.h
 c_pzasusb8.o: ../md5.h
 c_pzasusb8.o: ../nametype.h
@@ -633,6 +945,7 @@ c_pzasusb8.o: ../shs.h
 c_pzasusb8.o: ../shs1.h
 c_pzasusb8.o: ../string.h
 c_pzasusb8.o: ../value.h
+c_pzasusb8.o: ../win32dll.h
 c_pzasusb8.o: ../zmath.h
 c_pzasusb8.o: c_pzasusb8.c
 c_sysinfo.o: ../alloc.h
@@ -653,9 +966,9 @@ c_sysinfo.o: ../have_memmv.h
 c_sysinfo.o: ../have_newstr.h
 c_sysinfo.o: ../have_stdlib.h
 c_sysinfo.o: ../have_string.h
+c_sysinfo.o: ../have_unused.h
 c_sysinfo.o: ../hist.h
 c_sysinfo.o: ../longbits.h
-c_sysinfo.o: ../longlong.h
 c_sysinfo.o: ../md5.h
 c_sysinfo.o: ../nametype.h
 c_sysinfo.o: ../prime.h
@@ -664,6 +977,7 @@ c_sysinfo.o: ../shs.h
 c_sysinfo.o: ../shs1.h
 c_sysinfo.o: ../string.h
 c_sysinfo.o: ../value.h
+c_sysinfo.o: ../win32dll.h
 c_sysinfo.o: ../zmath.h
 c_sysinfo.o: ../zrand.h
 c_sysinfo.o: ../zrandom.h
@@ -691,5 +1005,6 @@ custtbl.o: ../shs.h
 custtbl.o: ../shs1.h
 custtbl.o: ../string.h
 custtbl.o: ../value.h
+custtbl.o: ../win32dll.h
 custtbl.o: ../zmath.h
 custtbl.o: custtbl.c

custom/argv.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: argv.cal,v 29.2 2000/06/07 14:03:03 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: argv.cal,v 29.3 2004/03/31 05:03:02 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/argv.cal,v $
  *
  * Under source code control:	1997/03/10 00:27:17
@@ -34,9 +34,14 @@
  * NOTE: You must use a calc that was compiled with ALLOW_CUSTOM= -DCUSTOM
  *	 and run with a -C arg.
  */
+if (config("compile_custom") == 0) {
+	quit "calc compiled without -DCUSTOM";
+} else if (config("allow_custom") == 0) {
+	quit "calc was run without the -D command line option";
+}
 
 
-define argv()
+define argv_test()
 {
 	local i;	/* arg number */
 	local junk;	/* throw away value */
@@ -54,7 +59,3 @@ define argv()
 	}
 	return i-1;
 }
-
-if (config("resource_debug") >= 0) {
-    print "argv(var, ...) defined";
-}

custom/c_argv.c

@@ -1,7 +1,7 @@
 /*
  * c_argv - a custom function display info about its args
  *
- * Copyright (C) 1999  Landon Curt Noll
+ * Copyright (C) 1999-2006  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: c_argv.c,v 29.2 2000/06/07 14:03:03 chongo Exp $
+ * @(#) $Revision: 29.8 $
+ * @(#) $Id: c_argv.c,v 29.8 2006/06/25 22:06:23 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/c_argv.c,v $
  *
  * Under source code control:	1997/03/09 20:27:37
@@ -40,6 +40,8 @@
 #include "../config.h"
 #include "../calc.h"
 
+#include "../have_unused.h"
+
 /*
  * c_argv - a custom function display info about its args
  *
@@ -51,7 +53,7 @@
  */
 /*ARGSUSED*/
 VALUE
-c_argv(char *name, int count, VALUE **vals)
+c_argv(char UNUSED *name, int count, VALUE **vals)
 {
 	VALUE result;		/* what we will return */
 	ZVALUE zfilelen;	/* length of a file as a ZVALUE */
@@ -121,12 +123,9 @@ c_argv(char *name, int count, VALUE **vals)
 		case V_BLOCK:	/* memory block */
 			type = "octet_block";
 			break;
-#if 0
-		/* XXX - V_OCTET is subject to change */
 		case V_OCTET:	/* octet (unsigned char) */
 			type = "octet";
 			break;
-#endif
 		default:
 			type = "unknown";
 			break;
@@ -150,10 +149,10 @@ c_argv(char *name, int count, VALUE **vals)
 				/* getsize error */
 				printf("\tsize=unknown");
 			}
-			printf("\tsizeof=%ld\n", lsizeof(vals[i]));
+			printf("\tsizeof=%ld\n", (long int)lsizeof(vals[i]));
 		} else {
 			printf("\tsize=%ld\tsizeof=%ld\n",
-			    elm_count(vals[i]), lsizeof(vals[i]));
+			    elm_count(vals[i]), (long int)lsizeof(vals[i]));
 		}
 	}
 

custom/c_devnull.c

@@ -1,7 +1,7 @@
 /*
  * c_devnull - a custom function that does nothing
  *
- * Copyright (C) 1999  Landon Curt Noll
+ * Copyright (C) 1999-2004  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: c_devnull.c,v 29.2 2000/06/07 14:03:03 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: c_devnull.c,v 29.4 2004/02/23 14:04:01 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/c_devnull.c,v $
  *
  * Under source code control:	1997/03/09 17:49:12
@@ -36,6 +36,8 @@
 #include "../value.h"
 #include "../custom.h"
 
+#include "../have_unused.h"
+
 
 /*
  * c_devnull - a custom function that does nothing
@@ -45,7 +47,7 @@
  */
 /*ARGSUSED*/
 VALUE
-c_devnull(char *name, int count, VALUE **vals)
+c_devnull(char UNUSED *name, int UNUSED count, VALUE UNUSED **vals)
 {
 	VALUE result;		/* what we will return */
 

custom/c_help.c

@@ -1,7 +1,7 @@
 /*
  * c_help - custom help function
  *
- * Copyright (C) 1999  Landon Curt Noll
+ * Copyright (C) 1999-2004  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: c_help.c,v 29.2 2000/06/07 14:03:03 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: c_help.c,v 29.4 2004/02/23 14:04:01 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/c_help.c,v $
  *
  * Under source code control:	1997/03/09 05:25:41
@@ -36,6 +36,8 @@
 #include "../value.h"
 #include "../custom.h"
 
+#include "../have_unused.h"
+
 
 /*
  * c_help - custom help function
@@ -56,7 +58,7 @@
  */
 /*ARGSUSED*/
 VALUE
-c_help(char *name, int count, VALUE **vals)
+c_help(char UNUSED *name, int UNUSED count, VALUE **vals)
 {
 	VALUE result;		/* what we will return */
 

custom/c_pmodm127.c

@@ -0,0 +1,276 @@
+/*
+ * c_pmodm127 - calculate q mod 2^(2^127-1)
+ *
+ * Copyright (C) 2004  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: c_pmodm127.c,v 29.5 2006/06/25 22:08:42 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/c_pmodm127.c,v $
+ *
+ * Under source code control:	2004/07/28 22:12:25
+ * File existed as early as:	2004
+ *
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+#if defined(CUSTOM)
+
+#include <stdio.h>
+
+#include "../have_const.h"
+#include "../value.h"
+#include "../custom.h"
+#include "../zmath.h"
+
+#include "../have_unused.h"
+
+/* 2^255 */
+static HALF h255[] = {
+#if BASEB == 32
+	(HALF)0x00000000, (HALF)0x00000000, (HALF)0x00000000, (HALF)0x00000000,
+	(HALF)0x00000000, (HALF)0x00000000, (HALF)0x00000000, (HALF)0x80000000
+#else /* BASEB == 32 */
+	(HALF)0x0000, (HALF)0x0000, (HALF)0x0000, (HALF)0x0000,
+	(HALF)0x0000, (HALF)0x0000, (HALF)0x0000, (HALF)0x0000,
+	(HALF)0x0000, (HALF)0x0000, (HALF)0x0000, (HALF)0x0000,
+	(HALF)0x0000, (HALF)0x0000, (HALF)0x0000, (HALF)0x8000
+#endif /* BASEB == 32 */
+};
+ZVALUE p255 = {
+    h255, 8, 0
+};
+
+
+/* static declarations */
+static void zmod5_or_zmod(ZVALUE *zp);
+static BOOL havelastmod = FALSE;
+static ZVALUE lastmod[1];
+static ZVALUE lastmodinv[1];
+
+
+/*
+ * c_pmodm127 - calculate q mod 2^(2^127-1)
+ *
+ * given:
+ *    count = 1;
+ *    vals[0]	real number;	(q - potential factor)
+ *
+ * returns:
+ *    result	real number;	(q mod 2^(2^127-1))
+ */
+/*ARGSUSED*/
+VALUE
+c_pmodm127(char UNUSED *name, int UNUSED count, VALUE **vals)
+{
+	VALUE result;		/* what we will return */
+	ZVALUE q;		/* test factor */
+	ZVALUE temp;		/* temp calculation value */
+	int i;			/* exponent value */
+
+	/*
+	 * arg check
+	 */
+	result.v_type = V_NULL;
+	if (vals[0]->v_type != V_NUM) {
+		math_error("Non-numeric argument for pmodm127");
+		/*NOTREACHED*/
+	}
+	if (qisfrac(vals[0]->v_num)) {
+		math_error("Non-integer argument for pmodm127");
+		/*NOTREACHED*/
+	}
+	if (qisneg(vals[0]->v_num) || qiszero(vals[0]->v_num)) {
+		math_error("argument for pmodm127 <= 0");
+		/*NOTREACHED*/
+	}
+
+	/*
+	 * look at the numerator
+	 */
+	q = vals[0]->v_num->num;
+
+	/*
+	 * setup lastmod with q
+	 */
+	if (havelastmod && zcmp(q, *lastmod)) {
+		zfree(*lastmod);
+		zfree(*lastmodinv);
+		havelastmod = FALSE;
+	}
+	if (!havelastmod) {
+		zcopy(q, lastmod);
+		zbitvalue(2 * q.len * BASEB, &temp);
+		zquo(temp, q, lastmodinv, 0);
+		zfree(temp);
+		havelastmod = TRUE;
+	}
+
+	/*
+	 * start with 2^255
+	 */
+	result.v_num = qalloc();
+	zcopy(p255, &result.v_num->num);
+	result.v_type = V_NUM;
+
+	/*
+	 * compute 2^(2^127-1) mod q by modular exponentation
+	 *
+	 * We implement the following calc code in C:
+	 *
+	 *	(* given q, our test factor, as the arg to this function *)
+	 *	result = 2^255;
+	 *	for (i=8; i < 127; ++i) {
+	 *		result %= q;	  (* mod *)
+	 *		result *= result; (* square *)
+	 *		result <<= 1;     (* times 2 *)
+	 *	}
+	 *	result %= q;	          (* result is now 2^(2^127-1) % q *)
+	 */
+	for (i=8; i<127; ++i) {
+#if 0
+		/* use of zmod is a bit slower than zmod5_or_zmod */
+		(void) zmod(result.v_num->num, *lastmod, &temp, 0);
+		zfree(result.v_num->num);
+		result.v_num->num = temp;
+#else
+		zmod5_or_zmod(&result.v_num->num);	/* mod */
+#endif
+#if 0
+		/* use of zmul is slightly slower than zsquare */
+		zmul(result.v_num->num, result.v_num->num, &temp);  /* square */
+#else
+		zsquare(result.v_num->num, &temp);	/* square */
+#endif
+		/*
+		 * We could manually shift here, but this would o speed
+		 * up the operation only a very tiny bit at the expense
+		 * of a bunch of special code.
+		 */
+		zfree(result.v_num->num);
+		zshift(temp, 1, &result.v_num->num);	/* times 2 */
+		zfree(temp);
+	}
+	zmod5_or_zmod(&result.v_num->num);	/* result = 2^(2^127-1) % q */
+
+	/*
+	 * cleanup and return result
+	 */
+	return result;
+}
+
+
+/*
+ * zmod5_or_zmod - fast integer modulo the modulus computation
+ *
+ * "borrowed" from ../zmod.c
+ *
+ * Given the address of a positive integer whose word count does not
+ * exceed twice that of the modulus stored at lastmod, to evaluate and store
+ * at that address the value of the integer modulo the modulus.
+ *
+ * Unlike the static routine in ../zmod.c, we will call the zmod and return
+ * the result of the zmod5_or_zmod conditions do not apply to the argument
+ * and saved mod.
+ */
+static void
+zmod5_or_zmod(ZVALUE *zp)
+{
+	LEN len, modlen, j;
+	ZVALUE tmp1, tmp2;
+	ZVALUE z1, z2, z3;
+	HALF *a, *b;
+	FULL f;
+	HALF u;
+
+	int subcount = 0;
+
+	if (zrel(*zp, *lastmod) < 0)
+		return;
+	modlen = lastmod->len;
+	len = zp->len;
+	z1.v = zp->v + modlen - 1;
+	z1.len = len - modlen + 1;
+	z1.sign = z2.sign = z3.sign = 0;
+	if (z1.len > modlen + 1) {
+		/* in ../zmod.c we did a math_error("Bad call to zmod5!!!"); */
+		/* here we just call the slower zmod and return the result */
+		(void) zmod(*zp, *lastmod, &tmp1, 0);
+		/* replace zp with tmp1 mod result */
+		zfree(*zp);
+		*zp = tmp1;
+		return;
+	}
+	z2.v = lastmodinv->v + modlen + 1 - z1.len;
+	z2.len = lastmodinv->len - modlen - 1 + z1.len;
+	zmul(z1, z2, &tmp1);
+	z3.v = tmp1.v + z1.len;
+	z3.len = tmp1.len - z1.len;
+	if (z3.len > 0) {
+		zmul(z3, *lastmod, &tmp2);
+		j = modlen;
+		a = zp->v;
+		b = tmp2.v;
+		u = 0;
+		len = modlen;
+		while (j-- > 0) {
+			f = (FULL) *a - (FULL) *b++ - (FULL) u;
+			*a++ = (HALF) f;
+			u = - (HALF) (f >> BASEB);
+		}
+		if (z1.len > 1) {
+			len++;
+			if (tmp2.len > modlen)
+				f = (FULL) *a - (FULL) *b - (FULL) u;
+			else
+				f = (FULL) *a - (FULL) u;
+			*a++ = (HALF) f;
+		}
+		while (len > 0 && *--a == 0)
+			len--;
+		zp->len = len;
+		zfree(tmp2);
+	}
+	zfree(tmp1);
+	while (len > 0 && zrel(*zp, *lastmod) >= 0) {
+		subcount++;
+		if (subcount > 2) {
+			math_error("Too many subtractions in zmod5_or_zmod");
+			/*NOTREACHED*/
+		}
+		j = modlen;
+		a = zp->v;
+		b = lastmod->v;
+		u = 0;
+		while (j-- > 0) {
+			f = (FULL) *a - (FULL) *b++ - (FULL) u;
+			*a++ = (HALF) f;
+			u = - (HALF) (f >> BASEB);
+		}
+		if (len > modlen) {
+			f = (FULL) *a - (FULL) u;
+			*a++ = (HALF) f;
+		}
+		while (len > 0 && *--a == 0)
+			len--;
+		zp->len = len;
+	}
+	if (len == 0)
+		zp->len = 1;
+}
+
+#endif /* CUSTOM */

custom/c_pzasusb8.c

@@ -1,7 +1,7 @@
 /*
  * c_pzasusb8 - print numereator as a string of USB8s
  *
- * Copyright (C) 1999  Ernest Bowen
+ * Copyright (C) 1999-2004  Ernest Bowen
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: c_pzasusb8.c,v 29.2 2000/06/07 14:03:03 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: c_pzasusb8.c,v 29.4 2004/02/23 14:04:01 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/c_pzasusb8.c,v $
  *
  * Under source code control:	1999/10/06 03:12:25
@@ -37,6 +37,8 @@
 #include "../custom.h"
 #include "../zmath.h"
 
+#include "../have_unused.h"
+
 /*
  * c_pzasusb8 - print numereator as a string of USB8s
  *
@@ -49,7 +51,7 @@
  */
 /*ARGSUSED*/
 VALUE
-c_pzasusb8(char *name, int count, VALUE **vals)
+c_pzasusb8(char UNUSED *name, int UNUSED count, VALUE **vals)
 {
 	VALUE result;		/* what we will return */
 	ZVALUE z;		/* numerator of the value */

custom/c_sysinfo.c

@@ -1,7 +1,7 @@
 /*
  * c_sysinfo - names and values of selected #defines
  *
- * Copyright (C) 1999  Landon Curt Noll
+ * Copyright (C) 1999,2004  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: c_sysinfo.c,v 29.3 2000/06/07 14:03:03 chongo Exp $
+ * @(#) $Revision: 29.11 $
+ * @(#) $Id: c_sysinfo.c,v 29.11 2006/05/22 19:04:45 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/c_sysinfo.c,v $
  *
  * Under source code control:	1997/03/09 23:14:40
@@ -42,7 +42,6 @@
 #include "../calc.h"
 #include "../longbits.h"
 #define CHECK_L_FORMAT
-#include "../longlong.h"
 #include "../block.h"
 #include "../calcerr.h"
 #include "../conf.h"
@@ -53,6 +52,8 @@
 #include "../zrand.h"
 #include "../zrandom.h"
 
+#include "../have_unused.h"
+
 
 /*
  * sys_info - names and values of selected #defines
@@ -64,7 +65,7 @@ struct infoname {
 	FULL nmbr;	/* if str==NULL ==> value fo #define as a FULL */
 };
 static struct infoname sys_info[] = {
-    {"A55", "slots in an additive 55 table", NULL, (FULL)A55},
+    {"S100", "slots in an subtractive 100 table", NULL, (FULL)S100},
     {"BASE", "base for calculations", NULL, (FULL)BASE},
     {"BASE1", "one less than base", NULL, (FULL)BASE},
     {"BASEB", "bits in the calculation base", NULL, (FULL)BASEB},
@@ -102,7 +103,6 @@ static struct infoname sys_info[] = {
     {"INIT_K", "initial 2nd walking a55 table index", NULL, (FULL)INIT_K},
     {"INODE_BITS", "inode number size in bits", NULL, (FULL)INODE_BITS},
     {"LITTLE_ENDIAN", "Least Significant Byte first symbol", NULL, (FULL)LITTLE_ENDIAN},
-    {"LONGLONG_BITS", "length of a long long, or 0", NULL, (FULL)LONGLONG_BITS},
     {"LONG_BITS", "bit length of a long", NULL, (FULL)LONG_BITS},
     {"MAP_POPCNT", "number of odd primes in pr_map", NULL, (FULL)MAP_POPCNT},
     {"MAX_CALCRC", "maximum allowed length of $CALCRC", NULL, (FULL)MAX_CALCRC},
@@ -112,7 +112,6 @@ static struct infoname sys_info[] = {
     {"MAXFILES", "max number of opened files", NULL, (FULL)MAXFILES},
     {"MAXFULL", "largest SFULL value", NULL, (FULL)MAXFULL},
     {"MAXHALF", "largest SHALF value", NULL, (FULL)MAXHALF},
-    {"MAXINDICES", "max number of indices for objects", NULL, (FULL)MAXINDICES},
     {"MAXLABELS", "max number of user labels in function", NULL, (FULL)MAXLABELS},
     {"MAXLEN", "longest storage size allowed", NULL, (FULL)MAXLEN},
     {"MAXLONG", "largest long val", NULL, (FULL)MAXLONG},
@@ -129,8 +128,6 @@ static struct infoname sys_info[] = {
     {"MAX_SM_PRIME", "larest 32 bit prime", NULL, (FULL)MAX_SM_PRIME},
     {"MAX_SM_VAL", "larest 32 bit value", NULL, (FULL)MAX_SM_VAL},
     {"MUL_ALG2", "default size for alternative multiply", NULL, (FULL)MUL_ALG2},
-    {"NEW_EPSILONPREC_DEFAULT", "2^-EPSILON_DEFAULT <= EPSILON_DEFAULT", NULL, (FULL)NEW_EPSILONPREC_DEFAULT},
-    {"NEW_EPSILON_DEFAULT", "newstd EPSILON_DEFAULT", NEW_EPSILON_DEFAULT, (FULL)0},
     {"NXT_MAP_PRIME", "smallest odd prime not in pr_map", NULL, (FULL)NXT_MAP_PRIME},
     {"NXT_PFACT_VAL", "next prime for higher pfact values", NULL, (FULL)NXT_PFACT_VAL},
     {"OFF_T_BITS", "file offset size in bits", NULL, (FULL)OFF_T_BITS},
@@ -182,7 +179,7 @@ static void dump_mening_value(void);	/* custom("sysinfo", 2) */
  */
 /*ARGSUSED*/
 VALUE
-c_sysinfo(char *name, int count, VALUE **vals)
+c_sysinfo(char UNUSED *name, int count, VALUE **vals)
 {
 	VALUE result;		/* what we will return */
 	struct infoname *p;	/* current infoname */
@@ -194,6 +191,7 @@ c_sysinfo(char *name, int count, VALUE **vals)
 	 * we will return NULL if a value was not found
 	 */
 	result.v_type = V_NULL;
+	result.v_subtype = V_NOSUBTYPE;
 
 	/*
 	 * case 0: if no args, then dump the table with no values
@@ -318,30 +316,16 @@ dump_name_value(void)
 	/* dump the entire table */
 	for (p = sys_info; p->name != NULL; ++p) {
 		if (p->str == NULL) {
-#if LONG_BITS == FULL_BITS || FULL_BITS == 32 || !defined(HAVE_LONGLONG)
+#if LONG_BITS == FULL_BITS || FULL_BITS == 32
 			printf("%s%-23s\t%-8lu\t(0x%lx)\n",
 			    (conf->tab_ok ? "\t" : ""), p->name,
 			    (unsigned long)p->nmbr,
 			    (unsigned long)p->nmbr);
 #else
-			/*
-			 * Determine of %ld can print a 64 bit long long.
-			 *
-			 * Some systems that can make use of %ld to print a
-			 * a 64 bit value do not support the %lld type.
-			 * So we will only try %lld if %ld does not work.
-			 */
-# if defined(L64_FORMAT)
-			printf("%s%-23s\t%-8lu\t(0x%lx)\n",
-			    (conf->tab_ok ? "\t" : ""), p->name,
-			    (unsigned long long)p->nmbr,
-			    (unsigned long long)p->nmbr);
-# else /* L64_FORMAT */
 			printf("%s%-23s\t%-8llu\t(0x%llx)\n",
 			    (conf->tab_ok ? "\t" : ""), p->name,
 			    (unsigned long long)p->nmbr,
 			    (unsigned long long)p->nmbr);
-# endif /* L64_FORMAT */
 #endif
 		} else {
 			printf("%s%-23s\t\"%s\"\n",
@@ -363,25 +347,16 @@ dump_mening_value(void)
 	/* dump the entire table */
 	for (p = sys_info; p->name != NULL; ++p) {
 		if (p->str == NULL) {
-#if LONG_BITS == FULL_BITS || FULL_BITS == 32 || !defined(HAVE_LONGLONG)
+#if LONG_BITS == FULL_BITS || FULL_BITS == 32
 			printf("%s%-36.36s\t%-8lu\t(0x%lx)\n",
 			    (conf->tab_ok ? "\t" : ""), p->meaning,
 			    (unsigned long)p->nmbr,
 			    (unsigned long)p->nmbr);
 #else
-# if defined(L64_FORMAT)
-			/* %ld prints all 64 bits, use %ld */
-			printf("%s%-36.36s\t%-8lu\t(0x%lx)\n",
-			    (conf->tab_ok ? "\t" : ""), p->meaning,
-			    (unsigned long long)p->nmbr,
-			    (unsigned long long)p->nmbr);
-# else /* L64_FORMAT */
-			/* %ld prints lower 32 bits only, use %lld */
 			printf("%s%-36.36s\t%-8llu\t(0x%llx)\n",
 			    (conf->tab_ok ? "\t" : ""), p->meaning,
 			    (unsigned long long)p->nmbr,
 			    (unsigned long long)p->nmbr);
-# endif /* L64_FORMAT */
 #endif
 		} else {
 			printf("%s%-36.36s\t\"%s\"\n",

custom/custtbl.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: custtbl.c,v 29.2 2000/06/07 14:03:03 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: custtbl.c,v 29.4 2005/02/05 06:16:19 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/custtbl.c,v $
  *
  * Under source code control:	1997/03/09 02:28:54
@@ -56,6 +56,7 @@ extern VALUE c_devnull(char*, int, VALUE**);
 extern VALUE c_help(char*, int, VALUE**);
 extern VALUE c_sysinfo(char*, int, VALUE**);
 extern VALUE c_pzasusb8(char*, int, VALUE**);
+extern VALUE c_pmodm127(char*, int, VALUE**);
 
 
 #endif /* CUSTOM */
@@ -105,9 +106,12 @@ CONST struct custom cust[] = {
 	{ "sysinfo", "return a calc #define value",
 	 0, 1, c_sysinfo },
 
-	{ "pzasusb8", "print ZCALUE as USB8",
+	{ "pzasusb8", "print ZVALUE as USB8",
 	 0, 1, c_pzasusb8 },
 
+	{ "pmodm127", "calculate q mod 2^(2^127-1)",
+	 1, 1, c_pmodm127 },
+
 
 #endif /* CUSTOM */
 

custom/halflen.cal

@@ -1,7 +1,7 @@
 /*
  * halflen - determine the length of numeric value in HALFs
  *
- * Copyright (C) 1999  Landon Curt Noll
+ * Copyright (C) 1999,2004  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: halflen.cal,v 29.2 2000/06/07 14:03:03 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: halflen.cal,v 29.3 2004/03/31 05:03:02 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/halflen.cal,v $
  *
  * Under source code control:	1997/03/08 20:51:32
@@ -34,11 +34,16 @@
  * NOTE: You must use a calc that was compiled with ALLOW_CUSTOM= -DCUSTOM
  *	 and run with a -C arg.
  */
+if (config("compile_custom") == 0) {
+	quit "calc compiled without -DCUSTOM";
+} else if (config("allow_custom") == 0) {
+	quit "calc was run without the -D command line option";
+}
 
 
 define halflen(num)
 {
-	local baseb = custom("sysinfo","BASEB");    /* bit len of a HALF */
+	local baseb;	    /* bit len of a HALF */
 
 	/*
 	 * firewall
@@ -47,6 +52,11 @@ define halflen(num)
 		return newerror("halflen only works on numeric values");
 	}
 
+	/*
+	 * determine baseb
+	 */
+	baseb = custom("sysinfo","BASEB");
+
 	/*
 	 * determine the HALF length of a numeric value
 	 */
@@ -63,7 +73,3 @@ define halflen(num)
 		return newerror("halflen only works on numeric values");
 	}
 }
-
-if (config("resource_debug") >= 0) {
-    print "halflen(num) defined";
-}

custom/pmodm127

@@ -0,0 +1,78 @@
+NAME
+    pmodm127 - calculate q mod 2^(2^127-1)
+
+SYNOPSIS
+    custom("pmodm127", q)
+
+TYPES
+    q		int > 0
+
+    return	int
+
+DESCRIPTION
+
+    This custom function will return the value:
+
+    	q mod 2^(2^127-1)
+
+    This custom function serves as a demonstration of how to write
+    a custom function.  It performs the equivalent of:
+
+	pmod(2, 2^127-1, q)
+
+    The return value is integer in the half open range: [0, q).
+
+    SPECIAL NOTE:
+
+	Can you find a value, q, for which this custom function returns 1?
+	If you do, send the value of q to chongo using the EMail address
+	found at:
+
+	    http://www.isthe.com/chongo/address.html
+
+EXAMPLE
+    > custom("pmodm127", 65537)
+	    32769
+
+    > custom("pmodm127", 2^31-1)
+	    8
+
+    > custom("pmodm127", 7^51+2)
+	    11228202966269457258557496419097462731193173
+
+LIMITS
+    calc must be built with ALLOW_CUSTOM= -DCUSTOM
+    calc must be executed with a -C arg.
+    q must be an integer > 0
+
+LIBRARY
+    none
+
+SEE ALSO
+    custom
+
+## Copyright (C) 2004  Landon Curt Noll
+##
+## Calc is open software; you can redistribute it and/or modify it under
+## the terms of the version 2.1 of the GNU Lesser General Public License
+## as published by the Free Software Foundation.
+##
+## Calc is distributed in the hope that it will be useful, but WITHOUT
+## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+## or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+## Public License for more details.
+##
+## A copy of version 2.1 of the GNU Lesser General Public License is
+## distributed with calc under the filename COPYING-LGPL.  You should have
+## received a copy with calc; if not, write to Free Software Foundation, Inc.
+## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+##
+## @(#) $Revision: 29.2 $
+## @(#) $Id: pmodm127,v 29.2 2004/07/29 09:28:58 chongo Exp $
+## @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/pmodm127,v $
+##
+## Under source code control:	2004/02/25 07:13:15
+## File existed as early as:	2004
+##
+## chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+## Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/

custom/pmodm127.cal

@@ -0,0 +1,137 @@
+/*
+ * pmodm127 - test pmodm127's ability to calculate q mod 2^(2^127-1)
+ *
+ * Copyright (C) 2004  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: pmodm127.cal,v 29.2 2004/07/29 08:35:36 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/pmodm127.cal,v $
+ *
+ * Under source code control:	2004/02/25 14:25:32
+ * File existed as early as:	2004
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+/*
+ * This file is part of the custom sample calc files.
+ *
+ * NOTE: You must use a calc that was compiled with ALLOW_CUSTOM= -DCUSTOM
+ *	 and run with a -C arg.
+ */
+if (config("compile_custom") == 0) {
+	quit "calc compiled without -DCUSTOM";
+} else if (config("allow_custom") == 0) {
+	quit "calc was run without the -D command line option";
+}
+
+
+define pmodm127_test1(testcnt)
+{
+	local q;	/* test factor */
+	local m127;	/* 2^127-1 */
+	local i;
+
+	/*
+	 * firewall
+	 */
+	if (!isint(testcnt) || testcnt <= 0) {
+		return newerror("pmodm127_test1 must have an integer count>0");
+	}
+
+	/*
+	 * perform testcnt divisor tests for primes of form 2*k*(2^127-1)+1
+	 *
+	 * NOTE: Since this is just a test, we do not need to be optimal.
+	 */
+	m127 = 2^127 - 1;
+	q = 2*4949132165849*m127+1;
+	for (i=0; i < testcnt; ++i) {
+
+		/*
+		 * determine next prime divisor
+		 */
+		q = nextcand(q, -1, 0, 1, 2*m127);
+
+		/* compare custom function with its pmod() equivalent */
+		if (config("resource_debug") & 8) {
+			print "testing", q;
+		}
+		if (pmod(2, m127, q) != custom("pmodm127", q)) {
+			print "ERROR: pmodm127 failed for ", str(q);
+			return newerror("pmodm127 failed for " + str(q));
+		}
+	}
+
+	/* return success count */
+	if (config("resource_debug") & 8) {
+		print "passed", testcnt, "tests";
+	}
+	return testcnt;
+}
+
+define pmodm127_test2(testcnt, seed)
+{
+	local q;	/* test factor */
+	local m127;	/* 2^127-1 */
+	local i;
+
+	/*
+	 * firewall
+	 */
+	if (!isint(testcnt) || testcnt <= 0) {
+		return newerror("pmodm127_test2 must have an integer count>0");
+	}
+	if (!isint(seed)) {
+		return newerror("pmodm127_test2 must an integer seed");
+	}
+
+	/*
+	 * perform testcnt divisor tests random integers over [1e51, 1e52)
+	 *
+	 * NOTE: Since this is just a test, we do not need to be optimal.
+	 */
+	m127 = 2^127 - 1;
+	for (i=0; i < testcnt; ++i) {
+
+		/*
+		 * determine next prime divisor
+		 */
+		q = rand(1e51, 1e52) | 0x1;
+		if (config("resource_debug") & 8) {
+			print "testing", q;
+		}
+
+		/* compare custom function with its pmod() equivalent */
+		if (pmod(2, m127, q) != custom("pmodm127", q)) {
+			print "ERROR: pmodm127 failed for ", str(q);
+			print "ERROR: ", pmod(2,m127,q), " != ", custom("pmodm127", q);
+			return newerror("pmodm127 failed for " + str(q));
+		}
+	}
+
+	/* return success count */
+	if (config("resource_debug") & 8) {
+		print "passed", testcnt, "tests";
+	}
+	return testcnt;
+}
+
+if ((config("resource_debug") & 3) && !(config("resource_debug") & 8)) {
+    print "DEBUG: use config('resource_debug',", config("resource_debug")|8:") to enable more debugging";
+}

custom/pzasusb8

@@ -19,7 +19,7 @@ DESCRIPTION
 		custom("sysinfo", "BASEB")
 		custom("sysinfo", "CALC_BYTE_ORDER")
 
-    foe details.
+    for details.
 
     This custom function is intented for testing of the general
     custom interface.
@@ -65,8 +65,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: pzasusb8,v 29.2 2000/06/07 14:03:03 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: pzasusb8,v 29.3 2005/10/18 11:18:34 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/pzasusb8,v $
 ##
 ## Under source code control:	1999/10/06 04:05:43

custom/pzasusb8.cal

@@ -1,7 +1,7 @@
 /*
  * pzasusb8 - print numereator as a string of USB8s
  *
- * Copyright (C) 1999  Ernest Bowen and Landon Curt Noll
+ * Copyright (C) 1999,2004  Ernest Bowen and Landon Curt Noll
  *
  * Primary author:  Ernest Bowen
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: pzasusb8.cal,v 29.2 2000/06/07 14:03:03 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: pzasusb8.cal,v 29.3 2004/03/31 05:03:02 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/pzasusb8.cal,v $
  *
  * Under source code control:	1999/10/06 03:11:12
@@ -31,6 +31,15 @@
  */
 
 
+/*
+ * firewall
+ */
+if (config("compile_custom") == 0) {
+	quit "calc compiled without -DCUSTOM";
+} else if (config("allow_custom") == 0) {
+	quit "calc was run without the -D command line option";
+}
+
 print "p(n) prints array in which numerator of n is stored as a";
 print "sequence of 2-hex-digits representing unsigned characters.";
 print "h(n) printx n in hex notation.  This should be the same as";
@@ -52,6 +61,5 @@ print "CALC_BYTE_ORDER: ", custom("sysinfo", "CALC_BYTE_ORDER");
 print "BIG_ENDIAN: ", custom("sysinfo", "BIG_ENDIAN");
 print "LITTLE_ENDIAN: ", custom("sysinfo", "LITTLE_ENDIAN");
 print "LONG_BITS: ", custom("sysinfo", "LONG_BITS");
-print "LONGLONG_BITS: ", custom("sysinfo", "LONGLONG_BITS");
 print "Calc sizes:";
 show sizes;

endian.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: endian.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: endian.c,v 29.4 2003/01/14 01:50:01 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/endian.c,v $
  *
  * Under source code control:	1993/11/15 04:32:58
@@ -36,6 +36,11 @@
 
 #include <stdio.h>
 
+#include "have_stdlib.h"
+#if defined(HAVE_STDLIB_H)
+#include <stdlib.h>
+#endif
+
 #include "have_unistd.h"
 #if defined(HAVE_UNISTD_H)
 #include <unistd.h>
@@ -48,8 +53,10 @@ char byte[8] = { (char)0x12, (char)0x36, (char)0x48, (char)0x59,
 int
 main(void)
 {
+#if !defined(LITTLE_ENDIAN) && !defined(BIG_ENDIAN)
 	/* pointers into the byte order array */
 	int *intp = (int *)byte;
+#endif
 #if defined(DEBUG)
 	short *shortp = (short *)byte;
 	long *longp = (long *)byte;
@@ -69,6 +76,11 @@ main(void)
 	printf("#define BIG_ENDIAN\t4321\n");
 	printf("#define LITTLE_ENDIAN\t1234\n");
 
+#if defined(LITTLE_ENDIAN)
+	printf("#define CALC_BYTE_ORDER\tLITTLE_ENDIAN\n");
+#elif defined(BIG_ENDIAN)
+	printf("#define CALC_BYTE_ORDER\tBIG_ENDIAN\n");
+#else
 	/* Determine byte order */
 	if (intp[0] == 0x12364859) {
 	    /* Most Significant Byte first */
@@ -81,6 +93,7 @@ main(void)
 		"Unknown int Byte Order, set CALC_BYTE_ORDER in Makefile\n");
 	    exit(1);
 	}
+#endif
 	/* exit(0); */
 	return 0;
 }

file.h

@@ -1,7 +1,7 @@
 /*
  * file - file I/O routines callable by users
  *
- * Copyright (C) 1999  David I. Bell and Landon Curt Noll
+ * Copyright (C) 1999-2006  David I. Bell and Landon Curt Noll
  *
  * Primary author:  David I. Bell
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: file.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.8 $
+ * @(#) $Id: file.h,v 29.8 2006/05/19 15:26:10 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/file.h,v $
  *
  * Under source code control:	1996/05/24 05:55:58
@@ -35,7 +35,11 @@
 #define __FILE_H__
 
 
-#include "have_fpos.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "have_fpos.h"
+#else
+# include <calc/have_fpos.h>
+#endif
 
 
 /*
@@ -49,8 +53,10 @@ typedef struct {
 	char *name;		/* file name */
 	BOOL reading;		/* TRUE if opened for reading */
 	BOOL writing;		/* TRUE if opened for writing */
+	BOOL appending;		/* TRUE if also opened for appending */
+	BOOL binary;		/* TRUE if binary mode - mode ignored/unused */
 	char action;		/* most recent use for 'r', 'w' or 0 */
-	char mode[3];		/* open mode */
+	char mode[sizeof("rb+")+1];/* open mode */
 } FILEIO;
 
 
@@ -85,11 +91,12 @@ typedef struct {
 /*
  * external functions
  */
-extern FILEIO * findid(FILEID id, int mode);
-extern int fgetposid(FILEID id, FILEPOS *ptr);
-extern int fsetposid(FILEID id, FILEPOS *ptr);
-extern int get_open_siz(FILE *fp, ZVALUE *res);
-extern char* findfname(FILEID);
+extern DLL FILEIO * findid(FILEID id, int writable);
+extern DLL int fgetposid(FILEID id, FILEPOS *ptr);
+extern DLL int fsetposid(FILEID id, FILEPOS *ptr);
+extern DLL int get_open_siz(FILE *fp, ZVALUE *res);
+extern DLL char* findfname(FILEID);
+extern DLL FILE *f_pathopen(char *name, char *mode, char *pathlist, char **openpath);
 
 
 #endif /* !__FILE_H__ */

fposval.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: fposval.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: fposval.c,v 29.6 2001/03/18 03:01:41 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/fposval.c,v $
  *
  * Under source code control:	1994/11/05 03:19:52
@@ -63,6 +63,7 @@
 #include "endian_calc.h"
 #include "have_offscl.h"
 #include "have_posscl.h"
+#include "have_fpos_pos.h"
 
 char *program;			/* our name */
 
@@ -83,7 +84,15 @@ main(int argc, char **argv)
 	/*
 	 * print the file position information
 	 */
+#if defined(HAVE_FPOS_POS)
+	fileposlen = FPOS_POS_BITS;
+#else /* ! HAVE_FPOS_POS */
+# if defined(FPOS_BITS)
+	fileposlen = FPOS_BITS;
+# else
 	fileposlen = sizeof(FILEPOS)*8;
+# endif
+#endif /* ! HAVE_FPOS_POS */
 	printf("#undef FILEPOS_BITS\n");
 	printf("#define FILEPOS_BITS %d\n", fileposlen);
 #if CALC_BYTE_ORDER == BIG_ENDIAN
@@ -113,8 +122,8 @@ main(int argc, char **argv)
 	 * Normally a "(*(dest) = *(src))" would do, but on some
 	 * systems a FILEPOS is not a scalar hince we must memcpy.
 	 */
-	printf("#define SWAP_HALF_IN_FILEPOS(dest, src)\t%s%d%s\n",
-	    "memcpy((void *)(dest), (void *)(src), sizeof(",fileposlen,"))");
+	printf("#define SWAP_HALF_IN_FILEPOS(dest, src)\t%s\n",
+	    "memcpy((void *)(dest), (void *)(src), sizeof(FPOS_POS_BITS))");
 #endif /* HAVE_FILEPOS_SCALAR */
 #endif /* CALC_BYTE_ORDER == BIG_ENDIAN */
 	putchar('\n');
@@ -122,7 +131,11 @@ main(int argc, char **argv)
 	/*
 	 * print the stat file size information
 	 */
+#if defined(OFF_T_BITS)
+	stsizelen = OFF_T_BITS;
+#else
 	stsizelen = sizeof(buf.st_size)*8;
+#endif
 	printf("#undef OFF_T_BITS\n");
 	printf("#define OFF_T_BITS %d\n", stsizelen);
 #if CALC_BYTE_ORDER == BIG_ENDIAN
@@ -156,7 +169,7 @@ main(int argc, char **argv)
 	 * systems, a off_t is not a scalar hince we must memcpy.
 	 */
 	printf("#define SWAP_HALF_IN_OFF_T(dest, src)\t%s%d%s\n",
-	    "memcpy((void *)(dest), (void *)(src), sizeof(",stsizelen,"))");
+	    "memcpy((void *)(dest), (void *)(src), ", stsizelen/8, ")");
 #endif /* HAVE_OFF_T_SCALAR */
 #endif /* CALC_BYTE_ORDER == BIG_ENDIAN */
 	putchar('\n');
@@ -164,7 +177,11 @@ main(int argc, char **argv)
 	/*
 	 * print the dev_t size
 	 */
+#if defined(DEV_BITS)
+	devlen = DEV_BITS;
+#else
 	devlen = sizeof(buf.st_dev)*8;
+#endif
 	printf("#undef DEV_BITS\n");
 	printf("#define DEV_BITS %d\n", devlen);
 #if CALC_BYTE_ORDER == BIG_ENDIAN
@@ -193,14 +210,18 @@ main(int argc, char **argv)
 	 * systems, a DEV is not a scalar hince we must memcpy.
 	 */
 	printf("#define SWAP_HALF_IN_DEV(dest, src)\t%s%d%s\n",
-	    "memcpy((void *)(dest), (void *)(src), sizeof(",devlen,"))");
+	    "memcpy((void *)(dest), (void *)(src), ", devlen/8, ")");
 #endif /* CALC_BYTE_ORDER == BIG_ENDIAN */
 	putchar('\n');
 
 	/*
 	 * print the ino_t size
 	 */
+#if defined(INODE_BITS)
+	inodelen = INODE_BITS;
+#else
 	inodelen = sizeof(buf.st_ino)*8;
+#endif
 	printf("#undef INODE_BITS\n");
 	printf("#define INODE_BITS %d\n", inodelen);
 #if CALC_BYTE_ORDER == BIG_ENDIAN
@@ -229,7 +250,7 @@ main(int argc, char **argv)
 	 * systems, a INODE is not a scalar hince we must memcpy.
 	 */
 	printf("#define SWAP_HALF_IN_INODE(dest, src)\t%s%d%s\n",
-	    "memcpy((void *)(dest), (void *)(src), sizeof(",inodelen,"))");
+	    "memcpy((void *)(dest), (void *)(src), ", inodelen/8, ")");
 #endif /* CALC_BYTE_ORDER == BIG_ENDIAN */
 	/* exit(0); */
 	return 0;

func.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: func.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: func.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/func.h,v $
  *
  * Under source code control:	1990/02/15 01:48:33
@@ -32,8 +32,13 @@
 #define __FUNC_H__
 
 
-#include "calc.h"
-#include "label.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "calc.h"
+# include "label.h"
+#else
+# include <calc/calc.h>
+# include <calc/label.h>
+#endif
 
 
 /*

hash.c

@@ -1,7 +1,7 @@
 /*
  * hash - one-way hash routines
  *
- * Copyright (C) 1999  Landon Curt Noll
+ * Copyright (C) 1999-2006  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: hash.c,v 29.3 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.10 $
+ * @(#) $Id: hash.c,v 29.10 2006/06/20 10:25:45 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/hash.c,v $
  *
  * Under source code control:	1995/11/23 05:13:11
@@ -596,7 +596,7 @@ hash_complex(int type, void *c, HASH *state)
 HASH *
 hash_str(int type, char *str, HASH *state)
 {
-	USB32 len;		/* string length */
+	size_t len;		/* string length */
 
 	/*
 	 * initialize if state is NULL
@@ -911,6 +911,7 @@ hash_value(int type, void *v, HASH *state)
 			(USB8 *)value->v_rand->buffer, SLEN*FULL_BITS/8);
 		state = hash_int(type, value->v_rand->j, state);
 		state = hash_int(type, value->v_rand->k, state);
+		state = hash_int(type, value->v_rand->need_to_skip, state);
 		(state->update)(state,
 			(USB8 *)value->v_rand->slot, SCNT*FULL_BITS/8);
 		(state->update)(state,
@@ -940,6 +941,7 @@ hash_value(int type, void *v, HASH *state)
 
 		/* hash the CONFIG state */
 		state = hash_int(type, value->v_config->outmode, state);
+		state = hash_int(type, value->v_config->outmode2, state);
 		state = hash_long(type,(long)value->v_config->outdigits, state);
 		state = hash_number(type, value->v_config->epsilon, state);
 		state = hash_long(type,
@@ -983,7 +985,19 @@ hash_value(int type, void *v, HASH *state)
 		state = hash_int(type, value->v_config->ctrl_d, state);
 		state = hash_str(type, value->v_config->program, state);
 		state = hash_str(type, value->v_config->base_name, state);
+		state = hash_bool(type, value->v_config->windows, state);
+		state = hash_bool(type, value->v_config->cygwin, state);
+		state = hash_bool(type, value->v_config->compile_custom, state);
+		if (value->v_config->allow_custom != NULL &&
+		    *(value->v_config->allow_custom)) {
+			state = hash_bool(type, TRUE, state);
+		} else {
+			state = hash_bool(type, FALSE, state);
+		}
 		state = hash_str(type, value->v_config->version, state);
+		state = hash_int(type, value->v_config->baseb, state);
+		state = hash_bool(type, value->v_config->redecl_warn, state);
+		state = hash_bool(type, value->v_config->dupvar_warn, state);
 		break;
 
 	case V_HASH:

hash.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: hash.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: hash.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/hash.h,v $
  *
  * Under source code control:	1995/11/14 23:57:45
@@ -33,10 +33,17 @@
 #define __HASH_H__
 
 
-#include "shs.h"
-#include "shs1.h"
-#include "md5.h"
-#include "zmath.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "shs.h"
+# include "shs1.h"
+# include "md5.h"
+# include "zmath.h"
+#else
+# include <calc/shs.h>
+# include <calc/shs1.h>
+# include <calc/md5.h>
+# include <calc/zmath.h>
+#endif
 
 
 /* MAX_CHUNKSIZE is the largest chunksize of any hash */

have_fpos_pos.c

@@ -0,0 +1,68 @@
+/*
+ * have_fpos_pos - Determine if a __pos element in FILEPOS
+ *
+ * Copyright (C) 2000  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: have_fpos_pos.c,v 29.2 2001/03/18 03:00:11 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/RCS/have_fpos_pos.c,v $
+ *
+ * Under source code control:	2000/12/17 01:23
+ * File existed as early as:	2000
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+/*
+ * If the symbol HAVE_NO_FPOS is defined, we will output nothing.
+ * If the HAVE_FILEPOS_SCALAR is defuned, we will output nothing.
+ * If we are able to compile this program, then we must have the
+ * __pos element in a non-scalar FILEPOS.
+ */
+
+
+#include <stdio.h>
+#include "have_fpos.h"
+#include "have_posscl.h"
+
+int
+main(void)
+{
+#if !defined(HAVE_NO_FPOS) && !defined(HAVE_FILEPOS_SCALAR)
+	fpos_t pos;		/* file position */
+
+	/* print a __pos element in fpos_t */
+	printf("#undef HAVE_FPOS_POS\n");
+	printf("#define HAVE_FPOS_POS 1  /* yes */\n\n");
+
+	/* determine __pos element size */
+	printf("#undef FPOS_POS_BITS\t/* no */\n");
+# if defined(FPOS_POS_BITS)
+	printf("#define FPOS_POS_BITS %d\n\n", FPOS_POS_BITS);
+# else
+	printf("#define FPOS_POS_BITS %d\n\n", sizeof(pos.__pos)*8);
+# endif
+
+#else
+	/* we have no __pos element */
+	printf("#undef HAVE_FPOS_POS\t/* no */\n");
+	printf("#undef FPOS_POS_BITS\n");
+#endif
+	/* exit(0); */
+	return 0;
+}

have_unused.c

@@ -0,0 +1,89 @@
+/*
+ * have_unused - Determine if we want or can support the unused attribute
+ *
+ * Copyright (C) 2004  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: have_unused.c,v 29.2 2004/02/23 08:35:42 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/RCS/have_unused.c,v $
+ *
+ * Under source code control:	2004/02/22 22:36:10
+ * File existed as early as:	2004
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+/*
+ * usage:
+ *	have_unused
+ *
+ * Not all compilers support the unused attribute, so this may not compile
+ * on your system.
+ *
+ * This prog outputs several defines:
+ *
+ *	HAVE_UNUSED
+ *		defined ==> ok to use unused
+ *		undefined ==> do not use unused
+ *
+ *	UNUSED
+ *		unused ==> use unused
+ *		(nothing) ==> unused not used
+ */
+
+
+#include <stdio.h>
+
+#if !defined(HAVE_NO_UNUSED)
+
+/* make sure that we can use the __attribute__((unused)) in #define's */
+#undef UNUSED
+#define UNUSED __attribute__((unused))
+
+/*
+ * unused_str - a function with an unused argument
+ */
+static char *
+unused_str(char UNUSED *str)
+{
+    return "__attribute__((unused))";
+}
+
+#endif /* !HAVE_NO_UNUSED */
+
+
+int
+main(void)
+{
+#if defined(HAVE_NO_UNUSED)
+
+	printf("#undef HAVE_UNUSED /* no */\n");
+	printf("#undef UNUSED\n");
+	printf("#define UNUSED /* no */\n");
+
+#else /* HAVE_NO_UNUSED */
+
+	printf("#define HAVE_UNUSED /* yes */\n");
+	printf("#undef UNUSED\n");
+	printf("#define UNUSED %s /* yes */\n", unused_str(NULL));
+
+#endif /* HAVE_NO_UNUSED */
+
+	/* exit(0); */
+	return 0;
+}

help.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.4 $
- * @(#) $Id: help.c,v 29.4 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.8 $
+ * @(#) $Id: help.c,v 29.8 2001/04/08 08:29:28 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/help.c,v $
  *
  * Under source code control:	1997/09/14 10:58:30
@@ -42,6 +42,11 @@
 #include <unistd.h>
 #endif
 
+#if defined(_WIN32)
+# define popen _popen
+# define pclose _pclose
+#endif
+
 
 /*
  * some help topics are symbols, so we alias them to nice filenames
@@ -57,6 +62,7 @@ static struct help_alias {
 	{".", "oldvalue"},
 	{"%", "mod"},
 	{"//", "quo"},
+	{"copy", "blkcpy"},
 	{"copying", "COPYING"},
 	{"copying-lgpl", "COPYING-LGPL"},
 	{"copying_lgpl", "COPYING-LGPL"},
@@ -65,6 +71,13 @@ static struct help_alias {
 	{"COPYRIGHT", "copyright"},
 	{"Copyleft", "copyright"},
 	{"COPYLEFT", "copyright"},
+	{"read", "command"},
+	{"write", "command"},
+	{"quit", "command"},
+	{"exit", "command"},
+	{"abort", "command"},
+	{"cd", "command"},
+	{"show", "command"},
 	{"stdlib", "resource"},
 	{NULL, NULL}
 };
@@ -105,7 +118,11 @@ page_file(FILE *stream)
 	/*
 	 * form a write pipe to a pager
 	 */
-	cmd = popen(pager, "w");
+	if (pager == NULL || pager[0] == '\0') {
+	    cmd = stdout;
+	} else {
+	    cmd = popen(pager, "w");
+	}
 	if (cmd == NULL) {
 		fprintf(stderr, "unable form pipe to pager: %s", pager);
 		return;

help/Makefile

@@ -2,7 +2,7 @@
 #
 # help - makefile for calc help files
 #
-# Copyright (C) 1999  Landon Curt Noll
+# Copyright (C) 1999-2002  Landon Curt Noll
 #
 # Calc is open software; you can redistribute it and/or modify it under
 # the terms of the version 2.1 of the GNU Lesser General Public License
@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.3 $
-# @(#) $Id: Makefile,v 29.3 2000/06/07 14:02:33 chongo Exp $
+# @(#) $Revision: 29.31 $
+# @(#) $Id: Makefile,v 29.31 2006/09/18 00:13:59 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/help/RCS/Makefile,v $
 #
 # Under source code control:	1991/07/23 06:47:57
@@ -36,15 +36,120 @@
 SHELL= /bin/sh
 MAKE_FILE = Makefile
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
-#
-TOPDIR= /usr/local/lib
-#TOPDIR= /usr/lib
-#TOPDIR= /usr/libdata
+####
 
-LIBDIR= ${TOPDIR}/calc
-HELPDIR= ${LIBDIR}/help
+# Where the system include (.h) files are kept
+#
+# For DJGPP, select:
+#
+#	INCDIR= /dev/env/DJDIR/include
+#
+# If in doubt, set:
+#
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
+SCRIPTDIR= ${BINDIR}/cscript
+
+# T - top level directory under which calc will be installed
+#
+# The calc install is performed under $T, the calc build is
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
+#
+# If $T is empty, calc is installed under /, which is the same
+# top of tree for which it was built.  If $T is non-empty, then
+# calc is installed under $T, as if one had to chroot under
+# $T for calc to operate.
+#
+# If in doubt, use T=
+#
+T=
 
 # Makefile debug
 #
@@ -63,6 +168,20 @@ CHMOD= chmod
 SED= sed
 SORT= sort
 FMT= fmt
+CMP= cmp
+
+# Some out of date operating systems require / want an executable to
+# end with a certain file extension.  Some compile systems such as
+# Cygwin build calc as calc.exe.  The EXT variable is used to denote
+# the extension required by such.
+#
+# EXT=				# normal Un*x / Linux / GNU/Linux systems
+# EXT=.exe			# windoz / Cygwin
+#
+# If in doubt, use EXT=
+#
+EXT=
+#EXT=.exe
 
 # Standard and Builtin help files
 #
@@ -139,31 +258,41 @@ BLT_HELP_FILES= ${BLT_HELP_FILES_3} ${BLT_HELP_FILES_5} \
 
 # This list is prodiced by the detaillist rule when no WARNINGS are detected.
 #
+# Please use:
+#
+#	make detaillist
+#
+# to keep this list in nice sorted order and to check that these
+# non-special help files are under RCS control.
+#
 DETAIL_HELP= abs access acos acosh acot acoth acsc acsch address agd append \
 	appr arg argv arrow asec asech asin asinh assign atan atan2 atanh \
-	avg base bit blk blkcpy blkfree blocks bround btrunc calclevel ceil \
-	cfappr cfsim char cmdbuf cmp comb conj cos cosh cot coth count cp \
-	csc csch ctime delete den dereference det digit digits dp epsilon \
-	errcount errmax errno error eval exp fact factor fclose fcnt feof \
-	ferror fflush fgetc fgetfield fgetline fgets fgetstr fib files floor \
-	fopen forall fprintf fputc fputs fputstr frac free freeglobals \
-	freeredc freestatics frem freopen fscan fscanf fseek fsize ftell \
-	gcd gcdrem gd getenv hash head highbit hmean hnrmod hypot ilog \
-	ilog10 ilog2 im indices inputlevel insert int inverse iroot isassoc \
-	isatty isblk isconfig isdefined iserror iseven isfile ishash isident \
-	isint islist ismat ismult isnull isnum isobj isobjtype isodd isprime \
-	isptr isqrt isrand israndom isreal isrel issimple issq isstr istype \
-	jacobi join lcm lcmfact lfactor ln lowbit ltol makelist matdim \
-	matfill matmax matmin matsum mattrace mattrans max md5 memsize meq \
-	min minv mmin mne mod modify name near newerror nextcand nextprime \
-	norm null num oldvalue ord param perm pfact pi pix places pmod polar \
-	poly pop popcnt power prevcand prevprime printf prompt protect ptest \
-	push putenv quo quomod rand randbit random randombit randperm rcin \
-	rcmul rcout rcpow rcsq re remove reverse rewind rm root round rsearch \
-	runtime saveval scale scan scanf search sec sech seed segment select \
-	sgn sha sha1 sin sinh size sizeof sort sqrt srand srandom ssq str \
-	strcat strerror strlen strpos strprintf strscan strscanf substr \
-	sum swap system tail tan tanh test time trunc xor
+	avg base base2 bernoulli bit blk blkcpy blkfree blocks bround \
+	btrunc calc_tty calclevel catalan ceil cfappr cfsim char cmdbuf \
+	cmp comb conj cos cosh cot coth count cp csc csch ctime delete den \
+	dereference det digit digits display dp epsilon errcount errmax \
+	errno error estr euler eval exp fact factor fclose fcnt feof ferror \
+	fflush fgetc fgetfield fgetfile fgetline fgets fgetstr fib files \
+	floor fopen forall fpathopen fprintf fputc fputs fputstr frac free \
+	freebernoulli freeeuler freeglobals freeredc freestatics frem freopen \
+	fscan fscanf fseek fsize ftell gcd gcdrem gd getenv hash head highbit \
+	hmean hnrmod hypot ilog ilog10 ilog2 im indices inputlevel insert \
+	int inverse iroot isassoc isatty isblk isconfig isdefined iserror \
+	iseven isfile ishash isident isint islist ismat ismult isnull isnum \
+	isobj isobjtype isodd isprime isptr isqrt isrand israndom isreal \
+	isrel issimple issq isstr istype jacobi join lcm lcmfact lfactor \
+	ln log lowbit ltol makelist matdim matfill matmax matmin matsum \
+	mattrace mattrans max md5 memsize meq min minv mmin mne mod modify \
+	name near newerror nextcand nextprime norm null num oldvalue ord \
+	param perm pfact pi pix places pmod polar poly pop popcnt power \
+	prevcand prevprime printf prompt protect ptest push putenv quo \
+	quomod rand randbit random randombit randperm rcin rcmul rcout \
+	rcpow rcsq re remove reverse rewind rm root round rsearch runtime \
+	saveval scale scan scanf search sec sech seed segment select sgn \
+	sha sha1 sin sinh size sizeof sleep sort sqrt srand srandom ssq \
+	str strcat strcmp strcpy strerror strlen strncmp strncpy strpos \
+	strprintf strscan strscanf substr sum swap system tail tan tanh \
+	test time trunc version xor
 
 # This list is of files that are clones of DETAIL_HELP files.  They are
 # built from DETAIL_HELP files.
@@ -237,7 +366,8 @@ changes: ../CHANGES
 
 libcalc: ../LIBRARY
 	rm -f $@
-	${SED} -e 's:$${LIBDIR}:${LIBDIR}:g' < ../LIBRARY > $@
+	${SED} -e 's:$${LIBDIR}:${LIBDIR}:g' \
+	       -e 's:$${CALC_INCDIR}:${CALC_INCDIR}:g' < ../LIBRARY > $@
 	${CHMOD} 0444 $@
 	-@if [ -z "${Q}" ]; then \
 	    echo ''; \
@@ -357,9 +487,9 @@ cscript: ../cscript/README
 	fi
 
 full: ${FULL_HELP_FILES} ${MAKE_FILE}
-	${Q}echo "forming full"
-	-${Q}rm -f $@
-	-${Q}for i in ${FULL_HELP_FILES}; do \
+	${Q} echo "forming full"
+	-${Q} rm -f $@
+	-${Q} for i in ${FULL_HELP_FILES}; do \
 	    if [ Xintro != X"$$i" ]; then \
 		echo ""; \
 	    else \
@@ -376,7 +506,7 @@ full: ${FULL_HELP_FILES} ${MAKE_FILE}
 	    echo ""; \
 	    cat $$i; \
 	done > $@
-	${Q}echo "full formed"
+	${Q} echo "full formed"
 	-@if [ -z "${Q}" ]; then \
 	    echo ''; \
 	    echo '=-=-= skipping the cat of help/$@ =-=-='; \
@@ -388,11 +518,13 @@ full: ${FULL_HELP_FILES} ${MAKE_FILE}
 # Singular files are the same files as their plural form.
 #
 ${SINGULAR_FILES}: ${PLURAL_FILES}
-	${Q}for i in ${SINGULAR_FILES}; do \
-	    echo "rm -f $${i}"; \
-	    rm -f $${i}; \
-	    echo "cp $${i}s $${i}"; \
-	    cp $${i}s $${i}; \
+	${Q} for i in ${SINGULAR_FILES} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo "rm -f $${i}"; \
+		rm -f $${i}; \
+		echo "cp $${i}s $${i}"; \
+		cp $${i}s $${i}; \
+	    fi; \
 	done
 	-@if [ -z "${Q}" ]; then \
 	    echo ''; \
@@ -421,18 +553,19 @@ ${SINGULAR_FILES}: ${PLURAL_FILES}
 # do not treat -I.. correctly!
 #
 builtin: builtin.top builtin.end ../func.c funclist.sed
-	${Q}echo "forming builtin help file"
-	-${Q}rm -f funclist.c
-	${Q}${SED} -n -f funclist.sed ../func.c > funclist.c
-	-${Q}rm -f funclist.o funclist
-	${Q}${LCC} ${ICFLAGS} -DFUNCLIST -I/usr/include -I.. funclist.c -c
-	${Q}${LCC} ${ILDFLAGS} funclist.o -o funclist
-	-${Q}rm -f builtin
-	${Q}cat builtin.top > builtin
-	${Q}./funclist | \
+	${Q} echo "forming builtin help file"
+	-${Q} rm -f funclist.c
+	${Q} ${SED} -n -f funclist.sed ../func.c > funclist.c
+	-${Q} rm -f funclist.o funclist${EXT}
+	${Q} ${LCC} ${ICFLAGS} -DFUNCLIST -I/usr/include \
+	    -I.. funclist.c -c 2>/dev/null
+	${Q} ${LCC} ${ILDFLAGS} funclist.o -o funclist${EXT}
+	-${Q} rm -f builtin
+	${Q} cat builtin.top > builtin
+	${Q} ./funclist${EXT} | \
 	    ${SED} -e 's/^/	/' -e 's/[	 ][	 ]*$$//' >> builtin
-	${Q}cat builtin.end >> builtin
-	${Q}echo "builtin help file formed"
+	${Q} cat builtin.end >> builtin
+	${Q} echo "builtin help file formed"
 	-@if [ -z "${Q}" ]; then \
 	    echo ''; \
 	    echo '=-=-= skipping the cat of help/$@ =-=-='; \
@@ -452,15 +585,17 @@ builtin: builtin.top builtin.end ../func.c funclist.sed
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q} for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo help/$$i; \
-	done | ${SORT}
+	    fi; \
+	done | LANG=C ${SORT}
 
 distdir:
-	${Q}echo help
+	${Q} echo help
 
 calcliblist:
-	${Q}for i in ${CALCLIBLIST} /dev/null; do \
+	${Q} for i in ${CALCLIBLIST} /dev/null; do \
 	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo help/$$i; \
 	    fi; \
@@ -477,58 +612,134 @@ bsdi: all
 # These next rule help me form the ${DETAIL_HELP} makefile variables above.
 #
 detaillist:
-	${Q}-(echo "xxxxx"; \
-	   for i in ${DETAIL_HELP}; do \
+	${Q} -(echo "xxxxx"; \
+	   for i in ${DETAIL_HELP} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		if [ ! -f RCS/$$i,v ]; then \
 		    echo "WARNING: $$i not under RCS control" 1>&2; \
 		else \
 		    echo $$i; \
 		fi; \
-	done | ${SORT}) | ${FMT} -70 | \
+	    fi; \
+	done | LANG=C ${SORT}) | ${FMT} -70 | \
 	    ${SED} -e '1s/xxxxx/DETAIL_HELP=/' -e '2,$$s/^/	/' \
 		   -e 's/$$/ \\/' -e '$$s/ \\$$//'
 
+##
+#
+# rpm rules
+#
+##
+
+echo_inst_files:
+	${Q} for i in ${STD_HELP_FILES} full ${BLT_HELP_FILES} \
+		  builtin ${DETAIL_HELP} ${SINGULAR_FILES} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${HELPDIR}/$$i; \
+	    fi; \
+	done
+	${Q} echo __file__ ${HELPDIR}/obj
+
+##
+#
+# Utility rules
+#
+##
+
 clean:
-	rm -f obj mkbuiltin funclist.c funclist.o funclist
+	rm -f obj mkbuiltin funclist.c funclist.o funclist${EXT}
 	rm -f COPYING COPYING-LGPL
 
 clobber:
 	rm -f ${BLT_HELP_FILES} full .all calc
-	rm -f obj mkbuiltin funclist.c funclist.o funclist
+	rm -f obj mkbuiltin funclist.c funclist.o funclist${EXT}
 	rm -f COPYING COPYING-LGPL
 	rm -f ${SINGULAR_FILES} ${DETAIL_CLONE}
 
+# install everything
+#
+# NOTE: Keep the uninstall rule in reverse order to the install rule
+#
 install: all
-	-${Q}if [ ! -d ${TOPDIR} ]; then \
-		echo mkdir ${TOPDIR}; \
-		mkdir ${TOPDIR}; \
+	-${Q} if [ ! -d $T${CALC_SHAREDIR} ]; then \
+	    echo mkdir $T${CALC_SHAREDIR}; \
+	    mkdir $T${CALC_SHAREDIR}; \
+	    if [ ! -d "$T${CALC_SHAREDIR}" ]; then \
+		echo mkdir -p "$T${CALC_SHAREDIR}"; \
+		mkdir -p "$T${CALC_SHAREDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
+	    ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${LIBDIR} ]; then \
-		echo mkdir ${LIBDIR}; \
-		mkdir ${LIBDIR}; \
+	-${Q} if [ ! -d $T${HELPDIR} ]; then \
+	    echo mkdir $T${HELPDIR}; \
+	    mkdir $T${HELPDIR}; \
+	    if [ ! -d "$T${HELPDIR}" ]; then \
+		echo mkdir -p "$T${HELPDIR}"; \
+		mkdir -p "$T${HELPDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${HELPDIR}; \
+	    ${CHMOD} 0755 $T${HELPDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${HELPDIR} ]; then \
-		echo mkdir ${HELPDIR}; \
-		mkdir ${HELPDIR}; \
-	else \
-	    true; \
-	fi
-	${Q}for i in ${STD_HELP_FILES} ${BLT_HELP_FILES} builtin \
-		  full ${DETAIL_HELP} ${SINGULAR_FILES}; do \
-		echo rm -f ${HELPDIR}/$$i; \
-		rm -f ${HELPDIR}/$$i; \
-		echo cp $$i ${HELPDIR}; \
-		cp $$i ${HELPDIR}; \
-		echo ${CHMOD} 0444 ${HELPDIR}/$$i; \
-		${CHMOD} 0444 ${HELPDIR}/$$i; \
+	-${Q} for i in ${STD_HELP_FILES} ${BLT_HELP_FILES} builtin \
+		  full ${DETAIL_HELP} ${SINGULAR_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s $$i $T${HELPDIR}/$$i; then \
+		true; \
+	    else \
+		rm -f $T${HELPDIR}/$$i.new; \
+		cp -f $$i $T${HELPDIR}/$$i.new; \
+		${CHMOD} 0444 $T${HELPDIR}/$$i.new; \
+		mv -f $T${HELPDIR}/$$i.new $T${HELPDIR}/$$i; \
+		echo "installed $T${HELPDIR}/$$i"; \
+	    fi; \
+	done
+	-${Q} if ${CMP} -s obj.file $T${HELPDIR}/obj; then \
+	    true; \
+	else \
+	    rm -f $T${HELPDIR}/obj.new; \
+	    cp -f obj.file $T${HELPDIR}/obj.new; \
+	    ${CHMOD} 0444 $T${HELPDIR}/obj.new; \
+	    mv -f $T${HELPDIR}/obj.new $T${HELPDIR}/obj; \
+	    echo "installed $T${HELPDIR}/obj"; \
+	fi
+
+# Try to remove everything that was installed
+#
+# NOTE: Keep the uninstall rule in reverse order to the install rule
+#
+uninstall:
+	-${Q} if [ -f "$T${HELPDIR}/obj" ]; then \
+	    rm -f "$T${HELPDIR}/obj"; \
+	    if [ -f "$T${HELPDIR}/obj" ]; then \
+		echo "cannot uninstall $T${HELPDIR}/obj"; \
+	    else \
+		echo "uninstalled $T${HELPDIR}/obj"; \
+	    fi; \
+	fi
+	-${Q} for i in ${SINGULAR_FILES} ${DETAIL_HELP} full builtin \
+	    ${BLT_HELP_FILES} ${STD_HELP_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if [ -f "$T${HELPDIR}/$$i" ]; then \
+	    	rm -f "$T${HELPDIR}/$$i"; \
+		if [ -f "$T${HELPDIR}/$$i" ]; then \
+		   echo "cannot uninstall $T${HELPDIR}/$$i"; \
+		else \
+		   echo "uninstalled $T${HELPDIR}/$$i"; \
+		fi; \
+	    fi; \
+	done
+	-${Q} for i in ${HELPDIR} ${CALC_SHAREDIR}; do \
+	    if [ -d "$T$$i" ]; then \
+		rmdir "$T$$i" 2>/dev/null; \
+		echo "cleaned up $T$$i"; \
+	    fi; \
 	done
-	rm -f ${HELPDIR}/obj
-	cp obj.file ${HELPDIR}/obj
-	${CHMOD} 0444 ${HELPDIR}/obj
-	${Q}echo remove files that are obsolete
-	-rm -f rmblk block stdlib
-	-rm -f ${HELPDIR}/rmblk ${HELPDIR}/block ${HELPDIR}/stdlib

help/abs

@@ -29,10 +29,10 @@ DESCRIPTION
     the result will be the absolute value correct to n decimal places.
 
 EXAMPLE
-    > print abs(3.4), abs(-3.4)
+    ; print abs(3.4), abs(-3.4)
     3.4 3.4
 
-    > print abs(3+4i, 1e-5), abs(4+5i, 1e-5), abs(4+5i, 1e-10)
+    ; print abs(3+4i, 1e-5), abs(4+5i, 1e-5), abs(4+5i, 1e-10)
     5 6.40312 6.4031242374
 
 LIMITS
@@ -60,8 +60,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: abs,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: abs,v 29.3 2006/05/07 07:25:46 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/abs,v $
 ##
 ## Under source code control:	1994/03/19 01:40:22

help/access

@@ -23,19 +23,19 @@ EXAMPLE
     The system error-numbers and messages may differ for different
 	implementations
 
-    > !rm -f junk
-    > access("junk")
+    ; !rm -f junk
+    ; access("junk")
 	System error 2
-    > strerror(.)
+    ; strerror(.)
 	"No such file or directory"
-    > f = fopen("junk", "w")
-    > access("junk")
-    > fputs(f, "Alpha")
-    > fclose(f)
-    > !chmod u-w junk
-    > access("junk", "w")
+    ; f = fopen("junk", "w")
+    ; access("junk")
+    ; fputs(f, "Alpha")
+    ; fclose(f)
+    ; !chmod u-w junk
+    ; access("junk", "w")
 	System error 13
-    > strerror(.)
+    ; strerror(.)
 	"Permission denied"
 
 LIMITS
@@ -64,8 +64,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: access,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: access,v 29.3 2006/05/07 07:25:46 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/access,v $
 ##
 ## Under source code control:	1996/04/30 03:36:20