Release calc version 2.11.0t10

BUGS

@@ -24,14 +24,16 @@ To be sure that your version of calc is up to date, check out:
 
 The calc web site is located at:
 
-	http://reality.sgi.com/chongo/tech/comp/calc
+	http://reality.sgi.com/chongo/tech/comp/calc/index.html
 
 =-=
 
 If you have tried all of the above and things still are not right,
 then it may be time to send in a bug report.  You can send bug reports to:
 
-    calc-tester@postofc.corp.sgi.com
+    calc-bugs at postofc dot corp dot sgi dot com
+
+    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
 
 When you send your report, please include the following information:
 
@@ -62,13 +64,18 @@ Stack traces from core dumps are useful to send as well.
 Send any comments, compiler warning messages, suggestions and most
 importantly, fixes (in the form of a context diff patch) to:
 
-    calc-tester@postofc.corp.sgi.com
+    calc-tester at postofc dot corp dot sgi dot com
+
+    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+
+You should use the above calc-bugs address for bug reports, if you are
+not currently a member of the calc-tester mailing list.
 
 =-=
 
 Known bugs:
 
-    * Calc does not support the #! exec method.  For example of the
+    * Calc does not support the #! exec method.	 For example of the
       following is placed in an executable file (assume the path to
       calc is correct) called /tmp/xyzzy:
 
@@ -96,27 +103,57 @@ Known bugs:
       the terminal in a 'bad' state, as if stty -icanon -echo -echoe
       had been executed.
 
-    * Dec Alpha Linux compiling with gcc-2.95.1 (or gcc-2.95.2) and
-      -O2 fails the regression test with:
-
-	make -s check
-	000: Beginning regression tests
-	001: Some of these tests may take a while ...
-	002: Within each section, output should be numbered sequentially
-	003: parsed global definitions
-	004: parsed vrfy()
-	005: parsed prob(str)
-	006: parsed getglobalvar()
-	007: parsed test_booleans()
-	008: parsed test_variables()
-	make: *** [check] Segmentation fault (core dumped)
-
-      Other programs have reported problems when compiling -O2 with
-      gcc-2.95.1 on the Alpha and Mips.
-
-      One work-a-round is to not compile with -O2 (perhaps just -O).
-      Another work-a-round is not use gcc-2.95.1.
+    * Use of 'fmt' in the 2nd arg of printf() calls in c_sysinfo.c
+      cause some compilers to issue warnings.
 
     We are sure some more bugs exist.  When you find them, please let
     us know!  See the above for details on how to report and were to
     EMail your bug reports and hopefully patches to fix them.
+
+=-=
+
+Other items of note:
+
+    * There is a bug in gcc-2.95 that causes calc, when compiled with -O2,
+      to fail the regression test.  The work-a-round is to compile with -O
+      or to use gcc-2.96 or later.
+
+    * There is a bug in some versions of the Dec/Compaq cc for the Alpha
+      where the following:
+
+	    #include <stdio.h>
+	    #define SVAL(a,b) (unsigned long)(0x ## a ## b ## ULL)
+	    main(){SVAL(b8a8aeb0,8168eadc);}
+
+      fails because it puts a space inside the concatenated hex.  Calc
+      has code that is affected by this bug.  This bug has been reported
+      to Compaq and may be fixed in the future.	 A work-a-round is to
+      compile with cc -std0 or to use a later version of their compiler.
+
+    * On a Digital UNIX V4.0F (Rev. 1229) on a 500 Mhz 21264, make check
+      dies a horrible death starting in test 600 and 622 gives 100s of
+      messages for calc version 2.11.0t9.4 using the Dec's cc with -O2:
+
+	600: Beginning test_bignums
+	601: muldivcheck 1
+	**** abc != acb: 602: muldivcheck 2
+	**** acb != bac: 602: muldivcheck 2
+	...
+	**** t4 != a4: 622: algcheck 1
+	**** t5 != a5: 622: algcheck 1
+	**** t6 != a6: 622: algcheck 1
+	**** t4 != a4: 622: algcheck 1
+	...
+
+	it finally hangs at test 2000.
+
+      The work-a-round is to compile calc without the optimizer.  If this
+      happens to you, try compiling without -O and without -O2.	 I.e., in
+      the Makefile, set:
+
+	DEBUG= -g
+
+    * The sparcv9 support for 64 bit Solaris under gcc-2.96 is able
+      to compile calc, but calc dumps core very early on in startup.
+      It is said that sparcv9 support in gcc-2.96 is very unofficial.
+      There is no work-a-round for this compile problem.

HOWTO.INSTALL

@@ -21,7 +21,7 @@ Installing calc in 4 easy steps:
 
 	   The CALCBINDINGS is matter of personal taste.  As shipped
 	   the Makefile assumes a default quasi-emacs-like command
-	   line editor.  Changing CALCBINDINGS= altbind will cause ^D
+	   line editor.	 Changing CALCBINDINGS= altbind will cause ^D
 	   to end calc in a fashion similar to that of the bc(1) command.
 
 	   Set TOPDIR to be the place under which help files, calc,

LIBRARY

@@ -43,7 +43,7 @@ to use more than one type of arithmetic, since qmath.h automatically includes
 zmath.h, and cmath.h automatically includes qmath.h.
 
 The prototypes for the available routines are listed in the above include
-files.  Some of these routines are meant for internal use, and so aren't
+files.	Some of these routines are meant for internal use, and so aren't
 convenient for outside use.  So you should read the source for a routine
 to see if it really does what you think it does.  I won't guarantee that
 obscure internal routines won't change or disappear in future releases!
@@ -60,7 +60,7 @@ External programs may want to compile with:
 ERROR HANDLING
 --------------
 
-Your program MUST provide a function called math_error.  This is called by
+Your program MUST provide a function called math_error.	 This is called by
 the math routines on an error condition, such as malloc failures or a
 division by zero.  The routine is called in the manner of printf, with a
 format string and optional arguments.  (However, none of the low level math
@@ -142,7 +142,7 @@ output strings with space filling, output formatted strings like printf, and
 flush the output.  Output from these routines is diverted as described above.
 
 You can change the default output mode by calling math_setmode, and you can
-change the default number of digits printed by calling math_setdigits.  These
+change the default number of digits printed by calling math_setdigits.	These
 routines return the previous values.  The possible modes are described in
 zmath.h.
 
@@ -154,7 +154,7 @@ The arbitrary precision integer routines define a structure called a ZVALUE.
 This is defined in zmath.h.  A ZVALUE contains a pointer to an array of
 integers, the length of the array, and a sign flag.  The array is allocated
 using malloc, so you need to free this array when you are done with a
-ZVALUE.  To do this, you should call zfree with the ZVALUE as an argument
+ZVALUE.	 To do this, you should call zfree with the ZVALUE as an argument
 (or call freeh with the pointer as an argument) and never try to free the
 array yourself using free.  The reason for this is that sometimes the pointer
 points to one of two statically allocated arrays which should NOT be freed.
@@ -248,7 +248,7 @@ If the value is too large for ztofull(), ztoulong() or ztolong(), only
 the low order bits converted.
 
 There are two types of comparisons you can make on ZVALUEs.  This is whether
-or not they are equal, or the ordering on size of the numbers.  The zcmp
+or not they are equal, or the ordering on size of the numbers.	The zcmp
 function tests whether two ZVALUEs are equal, returning TRUE if they differ.
 The zrel function tests the relative sizes of two ZVALUEs, returning -1 if
 the first one is smaller, 0 if they are the same, and 1 if the first one
@@ -267,7 +267,7 @@ is always positive.  If the NUMBER is an integer, the denominator has the
 value 1.
 
 Unlike ZVALUEs, NUMBERs are passed using pointers, and pointers to them are
-returned by functions.  So the basic type for using fractions is not really
+returned by functions.	So the basic type for using fractions is not really
 (NUMBER), but is (NUMBER *).  NUMBERs are allocated using the qalloc routine.
 This returns a pointer to a number which has the value 1.  Because of the
 special property of a ZVALUE of 1, the numerator and denominator of this
@@ -283,7 +283,7 @@ A better way to create NUMBERs with particular values is to use the itoq,
 iitoq, or atoq functions.  Using itoq makes a long value into a NUMBER,
 using iitoq makes a pair of longs into the numerator and denominator of a
 NUMBER (reducing them first if needed), and atoq converts a string representing
-a number into the corresponding NUMBER.  The atoq function accepts input in
+a number into the corresponding NUMBER.	 The atoq function accepts input in
 integral, fractional, real, or exponential formats.  Examples of allocating
 numbers are:
 
@@ -294,7 +294,7 @@ numbers are:
 	q3 = atoq("456.78");
 
 Also unlike ZVALUEs, NUMBERs are quickly copied.  This is because they contain
-a link count, which is the number of pointers there are to the NUMBER.  The
+a link count, which is the number of pointers there are to the NUMBER.	The
 qlink macro is used to copy a pointer to a NUMBER, and simply increments
 the link count and returns the same pointer.  Since it is a macro, the
 argument should not be a function call, but a real pointer variable.  The
@@ -329,11 +329,11 @@ denominator, qint to return the integer part of, qfrac to return the
 fractional part of, and qinv to invert a fraction.
 
 There are some transcendental functions in the library, such as sin and cos.
-These cannot be evaluated exactly as fractions.  Therefore, they accept
-another argument which tells how accurate you want the result.  This is an
+These cannot be evaluated exactly as fractions.	 Therefore, they accept
+another argument which tells how accurate you want the result.	This is an
 "epsilon" value, and the returned value will be within that quantity of
 the correct value.  This is usually an absolute difference, but for some
-functions (such as exp), this is a relative difference.  For example, to
+functions (such as exp), this is a relative difference.	 For example, to
 calculate sin(0.5) to 100 decimal places, you could do:
 
 	NUMBER *q, *ans, *epsilon;
@@ -363,7 +363,7 @@ macros are:
 The comparisons for NUMBERs are similar to the ones for ZVALUEs.  You use the
 qcmp and qrel functions.
 
-There are four predefined values for fractions.  You should qlink them when
+There are four predefined values for fractions.	 You should qlink them when
 you want to use them.  These are _qzero_, _qone_, _qnegone_, and _qonehalf_.
 These have the values 0, 1, -1, and 1/2.  An example of using them is:
 
@@ -377,7 +377,7 @@ USING COMPLEX NUMBERS
 ---------------------
 
 The arbitrary precision complex arithmetic routines define a structure
-called COMPLEX.  This is defined in cmath.h.  This contains two NUMBERs
+called COMPLEX.	 This is defined in cmath.h.  This contains two NUMBERs
 for the real and imaginary parts of a complex number, and a count of the
 number of links there are to this COMPLEX number.
 
@@ -410,7 +410,7 @@ There is no direct routine to convert a string value into a COMPLEX value.
 But you can do this yourself by converting two strings into two NUMBERS,
 and then using the qqtoc routine.
 
-COMPLEX values are always returned from these routines.  To split out the
+COMPLEX values are always returned from these routines.	 To split out the
 real and imaginary parts into normal NUMBERs, you can simply qlink the
 two components, as shown in the following example:
 
@@ -423,7 +423,7 @@ two components, as shown in the following example:
 
 There are many macros for checking quick things about complex numbers,
 similar to the ZVALUE and NUMBER macros.  In addition, there are some
-only used for complex numbers.  Examples of macros are:
+only used for complex numbers.	Examples of macros are:
 
 	cisreal(c)	(number is real)
 	cisimag(c)	(number is pure imaginary)
@@ -441,8 +441,8 @@ only used for complex numbers.  Examples of macros are:
 There is only one comparison you can make for COMPLEX values, and that is
 for equality.  The ccmp function returns TRUE if two complex numbers differ.
 
-There are three predefined values for complex numbers.  You should clink
-them when you want to use them.  They are _czero_, _cone_, and _conei_.
+There are three predefined values for complex numbers.	You should clink
+them when you want to use them.	 They are _czero_, _cone_, and _conei_.
 These have the values 0, 1, and i.
 
 ----------------

README

@@ -27,7 +27,7 @@ If you run into problems, see the BUGS file.
 Calc is distributed with an extensive collection of help files that
 are accessible from the command line.  The following assume that you
 are running calc from the distribution directory or that you have
-installed calc.  In these examples, the ">" is the calc prompt, not
+installed calc.	 In these examples, the ">" is the calc prompt, not
 something that you type in.
 
 For list of help topics:
@@ -52,7 +52,7 @@ C programmers should note some unexpected differences in the calc syntax:
 
     > help unexpected
 
-Calc is shipped with a library of calc scripts.  For a list see:
+Calc is shipped with a library of calc scripts.	 For a list see:
 
     > help stdlib
 
@@ -74,7 +74,9 @@ for a wish/todo list.  Code contributions are welcome.
 
 To join the calc-tester mailing list.  Send a request to:
 
-     calc-tester-request@postofc.corp.sgi.com
+    calc-tester-request at postofc dot corp dot sgi dot com
+
+    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
 
 Your message body (not the subject) should consist of:
 
@@ -85,6 +87,14 @@ Your message body (not the subject) should consist of:
 where ``address'' is your EMail address and ``your_full_name'' is
 your full name.
 
+Calc bug reports, however should be sent to:
+
+    calc-bugs at postofc dot corp dot sgi dot com
+
+    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+
+but see the BUGS file first.
+
 The calc web site is located at:
 
-	http://reality.sgi.com/chongo/tech/comp/calc
+	http://reality.sgi.com/chongo/tech/comp/calc/

addop.c

@@ -16,8 +16,8 @@
 #include "symbol.h"
 
 
-#define	FUNCALLOCSIZE	20	/* reallocate size for functions */
-#define	OPCODEALLOCSIZE	100	/* reallocate size for opcodes in functions */
+#define FUNCALLOCSIZE	20	/* reallocate size for functions */
+#define OPCODEALLOCSIZE 100	/* reallocate size for opcodes in functions */
 
 
 static long maxopcodes;		/* number of opcodes available */
@@ -114,6 +114,7 @@ beginfunc(char *name, BOOL newflag)
 	fp->f_localcount = 0;
 	fp->f_opcodecount = 0;
 	fp->f_savedvalue.v_type = V_NULL;
+	fp->f_savedvalue.v_subtype = V_NOSUBTYPE;
 	fp->f_name = namestr(&funcnames, newindex);
 	curfunc = fp;
 	initlocals();
@@ -167,7 +168,7 @@ endfunc(void)
 	if ((inputisterminal() && conf->lib_debug & LIBDBG_STDIN_FUNC) ||
 		(!inputisterminal() && conf->lib_debug & LIBDBG_FILE_FUNC)) {
 		printf("%s(", fp->f_name);
-		for (index = 0; index <  fp->f_paramcount; index++) {
+		for (index = 0; index <	 fp->f_paramcount; index++) {
 			if (index)
 				putchar(',');
 			printf("%s", paramname(index));
@@ -290,12 +291,12 @@ rmalluserfunc(void)
 long
 getuserfunc(char *name)
 {
- 	long index;
+	long index;
 
- 	index = findstr(&funcnames, name);
- 	if (index >= 0 && functions[index] != NULL)
- 		return index;
- 	return -1L;
+	index = findstr(&funcnames, name);
+	if (index >= 0 && functions[index] != NULL)
+		return index;
+	return -1L;
 }
 
 
@@ -534,8 +535,7 @@ addop(long op)
 				qfree(q);
 				fp->f_opcodes[count - 2] = OP_ZERO;
 				fp->f_opcodecount--;
-			}
-			else if (qisone(q)) {
+			} else if (qisone(q)) {
 				qfree(q);
 				fp->f_opcodes[count - 2] = OP_ONE;
 				fp->f_opcodecount--;
@@ -638,5 +638,3 @@ addoplabel(long op, LABEL *label)
 	addop(op);
 	uselabel(label);
 }
-
-/* END CODE */

align32.c

@@ -4,7 +4,7 @@
  * This file was written by:
  *
  *	Landon Curt Noll
- *	http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  *	chongo <was here> /\../\
  *
@@ -12,11 +12,11 @@
  * copyright this code.
  *
  * LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH  REGARD  TO
- * THIS  SOFTWARE,  INCLUDING  ALL IMPLIED WARRANTIES OF MER-
- * CHANTABILITY AND FITNESS.  IN NO EVENT SHALL  LANDON  CURT
- * NOLL  BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
+ * THIS	 SOFTWARE,  INCLUDING  ALL IMPLIED WARRANTIES OF MER-
+ * CHANTABILITY AND FITNESS.  IN NO EVENT SHALL	 LANDON	 CURT
+ * NOLL	 BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
  * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM  LOSS  OF
- * USE,  DATA  OR  PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * USE,	 DATA  OR  PROFITS, WHETHER IN AN ACTION OF CONTRACT,
  * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR  IN
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
@@ -70,7 +70,7 @@ main(void)
  * buserr - catch an alignment error
  *
  * given:
- *      arg             to keep ANSI C happy
+ *	arg		to keep ANSI C happy
  */
 /*ARGSUSED*/
 static void

assocfunc.c

@@ -14,10 +14,10 @@
 #include "value.h"
 
 
-#define	MINHASHSIZE	31	/* minimum size of hash tables */
-#define	GROWHASHSIZE	50	/* approximate growth for hash tables */
-#define	CHAINLENGTH	10	/* desired number of elements on a hash chain */
-#define	ELEMSIZE(n)	(sizeof(ASSOCELEM) + (sizeof(VALUE) * ((n) - 1)))
+#define MINHASHSIZE	31	/* minimum size of hash tables */
+#define GROWHASHSIZE	50	/* approximate growth for hash tables */
+#define CHAINLENGTH	10	/* desired number of elements on a hash chain */
+#define ELEMSIZE(n)	(sizeof(ASSOCELEM) + (sizeof(VALUE) * ((n) - 1)))
 
 
 static ASSOCELEM *elemindex(ASSOC *ap, long index);
@@ -80,6 +80,7 @@ associndex(ASSOC *ap, BOOL create, long dim, VALUE *indices)
 	 */
 	if (!create) {
 		val.v_type = V_NULL;
+		val.v_subtype = V_NOSUBTYPE;
 		return &val;
 	}
 
@@ -244,8 +245,7 @@ assoccmp(ASSOC *ap1, ASSOC *ap2)
 			hash = ep1->e_hash;
 			dim = ep1->e_dim;
 			for (ep2 = ap2->a_table[hash % size2]; ;
-				ep2 = ep2->e_next)
-			{
+				ep2 = ep2->e_next) {
 				if (ep2 == NULL)
 					return TRUE;
 				if (ep2->e_hash != hash)
@@ -282,8 +282,7 @@ assoccopy(ASSOC *oldap)
 
 	for (oldhi = 0; oldhi < oldap->a_size; oldhi++) {
 		for (oldep = oldap->a_table[oldhi]; oldep;
-			oldep = oldep->e_next)
-		{
+			oldep = oldep->e_next) {
 			ep = (ASSOCELEM *) malloc(ELEMSIZE(oldep->e_dim));
 			if (ep == NULL) {
 				math_error("Cannot allocate association element");
@@ -292,6 +291,7 @@ assoccopy(ASSOC *oldap)
 			ep->e_dim = oldep->e_dim;
 			ep->e_hash = oldep->e_hash;
 			ep->e_value.v_type = V_NULL;
+			ep->e_value.v_subtype = V_NOSUBTYPE;
 			for (i = 0; i < ep->e_dim; i++)
 				copyvalue(&oldep->e_indices[i], &ep->e_indices[i]);
 			copyvalue(&oldep->e_value, &ep->e_value);
@@ -447,8 +447,7 @@ assocprint(ASSOC *ap, long max_print)
 		((ap->a_count == 1) ? "" : "s"));
 
 	for (index = 0; ((index < max_print) && (index < ap->a_count));
-		index++)
-	{
+		index++) {
 		ep = elemindex(ap, index);
 		if (ep == NULL)
 			continue;
@@ -489,5 +488,3 @@ compareindices(VALUE *v1, VALUE *v2, long dim)
 
 	return TRUE;
 }
-
-/* END CODE */

blkcpy.c

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By: Ernest Bowen and Landon Curt Noll
- *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo
+ *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo/
  */
 
 #include <stdio.h>
@@ -330,6 +330,7 @@ copyblk2mat(BLOCK *blk, long ssi, long num, MATRIX *dmat, long dsi)
 	i = num;
 	while (i-- > 0) {
 		vp->v_type = V_NUM;
+		vp->v_subtype = V_NOSUBTYPE;
 		vp->v_num = itoq((long) *op++);
 		vp++;
 	}
@@ -546,7 +547,7 @@ copylist2list(LIST *slp, long ssi, long num, LIST *dlp, long dsi)
 int
 copyblk2file(BLOCK *sblk, long ssi, long num, FILEID id, long dsi)
 {
-	FILEIO 	*fiop;
+	FILEIO	*fiop;
 	FILE	*fp;
 	unsigned int	numw;
 
@@ -562,7 +563,7 @@ copyblk2file(BLOCK *sblk, long ssi, long num, FILEID id, long dsi)
 		return E_COPYF1;
 	fp = fiop->fp;
 	if (id == 1 || id == 2) {
-		numw = idfputstr(id, (char *)sblk->data + ssi);  /* XXX */
+		numw = idfputstr(id, (char *)sblk->data + ssi);	 /* XXX */
 		return 0;
 	}
 	if (dsi >= 0) {
@@ -583,7 +584,7 @@ copyblk2file(BLOCK *sblk, long ssi, long num, FILEID id, long dsi)
 int
 copyfile2blk(FILEID id, long ssi, long num, BLOCK *dblk, long dsi, BOOL noreloc)
 {
-	FILEIO 	*fiop;
+	FILEIO	*fiop;
 	FILE	*fp;
 	unsigned int	numw;
 	ZVALUE	fsize;
@@ -671,7 +672,7 @@ copystr2file(STRING *str, long ssi, long num, FILEID id, long dsi)
 		return E_COPYF1;
 	fp = fiop->fp;
 	if (id == 1 || id == 2) {
-		numw = idfputstr(id, str->s_str + ssi);  /* XXX */
+		numw = idfputstr(id, str->s_str + ssi);	 /* XXX */
 		return 0;
 	}
 	if (dsi >= 0) {
@@ -829,7 +830,7 @@ int
 copyostr2str(char *sstr, long ssi, long num, STRING *dstr, long dsi)
 {
 	long len;
-	char 	*c, *c1;
+	char	*c, *c1;
 
 	len = (long)strlen(sstr);
 
@@ -897,8 +898,8 @@ copyostr2blk(char *str,long ssi,long num,BLOCK *dblk,long dsi,BOOL noreloc)
  * Copying between objects that overlap will take place correctly.
  *
  * given:
- *	s1 	destination
- *	s2 	source
+ *	s1	destination
+ *	s2	source
  *	n	octet count
  *
  * returns:
@@ -958,7 +959,7 @@ copynum2blk(NUMBER *snum, long ssi, long num, BLOCK *dblk, long dsi, BOOL norelo
 	long	newsize;
 	USB8	*newdata;
 #if CALC_BYTE_ORDER == BIG_ENDIAN
-	ZVALUE	*swnum;	/* byte swapped numerator */
+	ZVALUE	*swnum; /* byte swapped numerator */
 #endif
 
 	if (ssi > snum->num.len)

blkcpy.h

@@ -8,7 +8,7 @@
 
 
 #if !defined(__BLKCPY_H__)
-#define	__BLKCPY_H__
+#define __BLKCPY_H__
 
 /*
  * the main copy gateway function

block.c

@@ -23,12 +23,12 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  * Comments, suggestions, bug fixes and questions about these routines
- * are welcome.  Send EMail to the address given below.
+ * are welcome.	 Send EMail to the address given below.
  *
  * Happy bit twiddling,
  *
  *	Landon Curt Noll
- *	http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */
@@ -141,7 +141,7 @@ blk_free(BLOCK *blk)
 /*
  * blkchk - check the sanity of a block
  *
- * These checks should never fail if calc is working correctly.  During
+ * These checks should never fail if calc is working correctly.	 During
  * debug time, we plan to call this function often.  Once we are satisfied,
  * we will normally call this code only in a few places.
  *
@@ -205,13 +205,13 @@ blkchk(BLOCK *blk)
  *
  * Reallocation of a block can change several aspects of a block.
  *
- * 	It can change the much data it holds or can hold.
+ *	It can change the much data it holds or can hold.
  *
- * 	It can change the memory footprint (in terms of
- * 	how much storage is malloced for current or future use).
+ *	It can change the memory footprint (in terms of
+ *	how much storage is malloced for current or future use).
  *
  *	It can change the chunk size used to grow malloced size
- * 	as the data size grows.
+ *	as the data size grows.
  *
  * Each of the len and chunksize may be kept the same.
  *
@@ -329,7 +329,7 @@ blkrealloc(BLOCK *blk, int newlen, int newchunk)
 /*
  * blktrunc - truncate a BLOCK down to a minimal fixed block
  *
- * NOTE: THIS IS NOT THE INTERNAL CALC FREE FUNCTION!!  This
+ * NOTE: THIS IS NOT THE INTERNAL CALC FREE FUNCTION!!	This
  * is what blktrunc() builtin calls to reduce storage of a block
  * down to an absolute minimum.
  *
@@ -479,7 +479,7 @@ blk_print(BLOCK *blk)
 	BOOL havetail;
 	USB8 *ptr;
 
-	/* XXX - use the config parameters for better print control */
+	/* XXX - should use the config parameters for better print control */
 
 	printf("chunksize = %d, maxsize = %d, datalen = %d\n\t",
 		(int)blk->blkchunk, (int)blk->maxsize, (int)blk->datalen);
@@ -512,9 +512,9 @@ nblock_print(NBLOCK *nblk)
 		printf("chunksize = %d, maxsize = %d, datalen = %d\n\t",
 		(int)blk->blkchunk, (int)blk->maxsize, (int)blk->datalen);
 		printf("NULL");
-	}
-	else
+	} else {
 		blk_print(blk);
+	}
 }
 
 
@@ -556,8 +556,7 @@ reallocnblock(int id, int len, int chunk)
 			math_error("Allocation failed");
 			/*NOTREACHED*/
 		}
-	}
-	else if (newsize != oldsize) {
+	} else if (newsize != oldsize) {
 		newdata = realloc(blk->data, newsize);
 		if (newdata == NULL) {
 			math_error("Reallocation failed");
@@ -719,7 +718,7 @@ findnblock(int id)
 
 /*
  * Create a new block with specified newlen and new chunksize and copy
- * min(newlen, oldlen) octets to the new block.  The old block is
+ * min(newlen, oldlen) octets to the new block.	 The old block is
  * not changed.
  */
 BLOCK *
@@ -730,7 +729,7 @@ copyrealloc(BLOCK *blk, int newlen, int newchunk)
 
 	oldlen = blk->datalen;
 
-	if (newlen < 0) 		/* retain length */
+	if (newlen < 0)			/* retain length */
 		newlen = oldlen;
 
 	if (newchunk < 0)		/* retain chunksize */

block.h

@@ -23,19 +23,19 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  * Comments, suggestions, bug fixes and questions about these routines
- * are welcome.  Send EMail to the address given below.
+ * are welcome.	 Send EMail to the address given below.
  *
  * Happy bit twiddling,
  *
  *	Landon Curt Noll
- *	http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */
 
 
 #if !defined(__BLOCK_H__)
-#define	__BLOCK_H__
+#define __BLOCK_H__
 
 
 /*
@@ -139,8 +139,8 @@
  *		style of output = {
  *		    "line",	lines in blkbase with no spaces between octets
  *		    "string",	as one long line with no spaces between octets
- *		    "od_style",	position, spaces between octets
- *		    "hd_style"}	position, spaces between octets, chars on end
+ *		    "od_style", position, spaces between octets
+ *		    "hd_style"} position, spaces between octets, chars on end
  */
 struct block {
 	LEN blkchunk;	/* allocation chunk size */

byteswap.c

@@ -28,9 +28,9 @@
  * swap_b8_in_HALFs - swap 8 and if needed, 16 bits in an array of HALFs
  *
  * given:
- *      dest    - pointer to where the swapped src wil be put or
+ *	dest	- pointer to where the swapped src wil be put or
  *		  NULL to allocate the storage
- *	src     - pointer to a HALF array to swap
+ *	src	- pointer to a HALF array to swap
  *	len	- length of the src HALF array
  *
  * returns:
@@ -263,9 +263,9 @@ swap_b8_in_COMPLEX(COMPLEX *dest, COMPLEX *src, BOOL all)
  * swap_b16_in_HALFs - swap 16 bits in an array of HALFs
  *
  * given:
- *      dest    - pointer to where the swapped src wil be put or
+ *	dest	- pointer to where the swapped src wil be put or
  *		  NULL to allocate the storage
- *	src     - pointer to a HALF array to swap
+ *	src	- pointer to a HALF array to swap
  *	len	- length of the src HALF array
  *
  * returns:

calc.c

@@ -39,9 +39,6 @@
 /*
  * static definitions and functions
  */
-static char *usage = "usage: %s [-c] [-C] [-d] [-e] [-h] [-i] [-m mode]\n"
-		     "\t[-D calc_debug[:lib_debug:[user_debug]]]\n"
-		     "\t[-n] [-p] [-q] [-u] [-v] [[--] calc_cmd ...]\n";
 static void intint(int arg);	/* interrupt routine */
 
 
@@ -153,7 +150,11 @@ main(int argc, char **argv)
 			 * we are too early in processing to call
 			 * libcalc_call_me_last() - nothing to cleanup
 			 */
-			fprintf(stderr, usage, program);
+			fprintf(stderr,
+			  "usage: %s [-c] [-C] [-d] [-e] [-h] [-i] [-m mode]\n"
+			  "\t[-D calc_debug[:lib_debug:[user_debug]]]\n"
+			  "\t[-n] [-p] [-q] [-u] [-v] [[--] calc_cmd ...]\n",
+			  program);
 			exit(1);
 		}
 	}
@@ -393,7 +394,7 @@ main(int argc, char **argv)
 				    printf("DEBUG: run_state from %s to %s\n",
 					run_state_name(run_state),
 					run_state_name(RUN_EXIT_WITH_ERROR));
-			 	run_state = RUN_EXIT_WITH_ERROR;
+				run_state = RUN_EXIT_WITH_ERROR;
 			}
 		}
 	}

calc.h

@@ -8,53 +8,54 @@
 
 
 #if !defined(__CALC_H__)
-#define	__CALC_H__
+#define __CALC_H__
 
 #include <setjmp.h>
 
 #include "value.h"
 
+#include "have_const.h"
+
 
 /*
  * Configuration definitions
  */
-#define	CALCPATH	"CALCPATH"	/* environment variable for files */
-#define	CALCRC		"CALCRC"	/* environment variable for startup */
-#define	CALCBINDINGS	"CALCBINDINGS"	/* environment variable for hist bindings */
-#define	HOME		"HOME"		/* environment variable for home dir */
-#define	PAGER		"PAGER"		/* environment variable for help */
-#define	SHELL		"SHELL"		/* environment variable for shell */
-#define DEFAULTCALCHELP	"help"		/* help file that -h prints */
+#define CALCPATH	"CALCPATH"	/* environment variable for files */
+#define CALCRC		"CALCRC"	/* environment variable for startup */
+#define CALCBINDINGS	"CALCBINDINGS"	/* environment variable for hist bindings */
+#define HOME		"HOME"		/* environment variable for home dir */
+#define PAGER		"PAGER"		/* environment variable for help */
+#define SHELL		"SHELL"		/* environment variable for shell */
+#define DEFAULTCALCHELP "help"		/* help file that -h prints */
 #define DEFAULTSHELL	"sh"		/* default shell to use */
-#define	CALCEXT		".cal"	/* extension for files read in */
-#define	MAX_CALCRC	1024	/* maximum length of $CALCRC */
-#define	HOMECHAR	'~'	/* char which indicates home directory */
+#define CALCEXT		".cal"	/* extension for files read in */
+#define MAX_CALCRC	1024	/* maximum length of $CALCRC */
+#define HOMECHAR	'~'	/* char which indicates home directory */
 #define DOTCHAR		'.'	/* char which indicates current directory */
-#define	PATHCHAR	'/'	/* char which separates path components */
-#define	LISTCHAR	':'	/* char which separates paths in a list */
-#define	MAXCMD		16384	/* maximum length of command invocation */
-#define	MAXERROR	512	/* maximum length of error message string */
+#define PATHCHAR	'/'	/* char which separates path components */
+#define LISTCHAR	':'	/* char which separates paths in a list */
+#define MAXCMD		16384	/* maximum length of command invocation */
+#define MAXERROR	512	/* maximum length of error message string */
 
-#define	SYMBOLSIZE	256	/* maximum symbol name size */
-#define	MAXINDICES	20	/* maximum number of indices for objects */
-#define	MAXLABELS	100	/* maximum number of user labels in function */
-#define	MAXOBJECTS	128	/* maximum number of object types */
-#define	MAXSTRING	1024	/* maximum size of string constant */
-#define	MAXSTACK	1000	/* maximum depth of evaluation stack */
-#define	MAXFILES	20	/* maximum number of opened files */
+#define SYMBOLSIZE	256	/* maximum symbol name size */
+#define MAXINDICES	20	/* maximum number of indices for objects */
+#define MAXLABELS	100	/* maximum number of user labels in function */
+#define MAXSTRING	1024	/* maximum size of string constant */
+#define MAXSTACK	1000	/* maximum depth of evaluation stack */
+#define MAXFILES	20	/* maximum number of opened files */
 #define PROMPT1		"> "	/* default normal prompt*/
 #define PROMPT2		">> "	/* default prompt inside multi-line input */
 
 
-#define	TRACE_NORMAL	0x00	/* normal trace flags */
-#define	TRACE_OPCODES	0x01	/* trace every opcode */
-#define	TRACE_NODEBUG	0x02	/* suppress debugging opcodes */
+#define TRACE_NORMAL	0x00	/* normal trace flags */
+#define TRACE_OPCODES	0x01	/* trace every opcode */
+#define TRACE_NODEBUG	0x02	/* suppress debugging opcodes */
 #define TRACE_LINKS	0x04	/* display links for real and complex numbers */
 #define TRACE_FNCODES	0x08	/* display code for newly defined function */
-#define	TRACE_MAX	0x0f	/* maximum value for trace flag */
+#define TRACE_MAX	0x0f	/* maximum value for trace flag */
 
 #define ABORT_NONE	0	/* abort not needed yet */
-#define ABORT_STATEMENT	1	/* abort on statement boundary */
+#define ABORT_STATEMENT 1	/* abort on statement boundary */
 #define ABORT_OPCODE	2	/* abort on any opcode boundary */
 #define ABORT_MATH	3	/* abort on any math operation */
 #define ABORT_NOW	4	/* abort right away */
@@ -64,10 +65,10 @@
 /*
  * File ids corresponding to standard in, out, error, and when not in use.
  */
-#define	FILEID_STDIN	((FILEID) 0)
-#define	FILEID_STDOUT	((FILEID) 1)
-#define	FILEID_STDERR	((FILEID) 2)
-#define	FILEID_NONE	((FILEID) -1)
+#define FILEID_STDIN	((FILEID) 0)
+#define FILEID_STDOUT	((FILEID) 1)
+#define FILEID_STDERR	((FILEID) 2)
+#define FILEID_NONE	((FILEID) -1)
 
 /*
  * File I/O routines.
@@ -141,6 +142,7 @@ extern void givehelp(char *type);
 extern void libcalc_call_me_first(void);
 extern void libcalc_call_me_last(void);
 extern void showerrors(void);
+extern char *calc_strdup(CONST char *);
 
 /*
  * Initialization
@@ -190,7 +192,7 @@ extern int errmax;	/* if >= 0, error when errcount exceeds errmax */
 extern int new_std;	/* TRUE (-n) => use newstd configuration */
 
 extern int allow_read;	/* FALSE => may not open any files for reading */
-extern int allow_write;	/* FALSE => may not open any files for writing */
+extern int allow_write; /* FALSE => may not open any files for writing */
 extern int allow_exec;	/* FALSE => may not execute any commands */
 
 /*

calc.man

@@ -212,7 +212,7 @@ This flag sets the permission mode of
 It controls the ability for
 .B calc
 to open files and execute programs.
-.I Mode 
+.I Mode
 may be a number from 0 to 7.
 .sp 1
 The mode value is interpreted in a way similar to that
@@ -340,7 +340,7 @@ Normally on startup,
 attempts to execute a collection of
 library scripts.
 The environment variable $CALCRC (if non-existent
-then a compiled in value) contains a :  separated list of startup
+then a compiled in value) contains a :	separated list of startup
 library scripts.
 No error conditions are produced if these startup
 library scripts are not found.
@@ -559,6 +559,9 @@ by this environment variable.
 .sp
 Default value: ${CALCBINDINGS}
 .sp
+This variable is not used if calc was compiled with GNU-readline support.
+In that case, the standard readline mechanisms (see readline(3)) are used.
+.sp
 .SH CREDIT
 \&
 .br
@@ -567,7 +570,11 @@ The majority of
 was written by David I. Bell.
 .sp
 .B Calc
-archives and calc-tester mailing list maintained by Landon Curt Noll.
+The Calc primary mirror, calc mailing list and calc bug report
+processing is performed by Landon Curt Noll.
+.sp
+Landon Curt Noll maintains the master reference source, performs
+release control functions as well as other calc maintenance functions.
 .sp
 Thanks for suggestions and encouragement from Peter Miller,
 Neil Justusson, and Landon Noll.
@@ -582,7 +589,7 @@ Ernest also supplied the original text for many of the help files.
 .sp
 Portions of this program are derived from an earlier set of
 public domain arbitrarily precision routines which was posted
-to the net around 1984.  By now, there is almost no recognizable
+to the net around 1984.	 By now, there is almost no recognizable
 code left from that original source.
 .sp
 Most of this source and binary has one of the following copyrights:
@@ -607,15 +614,42 @@ scripts that you would like you see included
 in future distributions to:
 .sp
 .in +0.5i
-calc-tester@postofc.corp.sgi.com
+.nf
+calc-tester at postofc dot corp dot sgi dot com
+
+[[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+.fi
 .in -0.5i
 .sp
+Bug reports are sent to:
+.in +0.5i
+.nf
+calc-bugs at postofc dot corp dot sgi dot com
+
+[[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+.fi
+.in -0.5i
+.sp
+See the
+.I BUGS
+source file or use the
+.I calc
+command:
+.sp
+.in +0.5i
+.nf
+help bugs
+.fi
+.in -0.5i
+.sp
+for more information about bug reporting.
+.sp
 Landon Noll maintains the the
 .B calc
 web site is located at:
 .sp
 .in +0.5i
-http://reality.sgi.com/chongo/tech/comp/calc
+http://reality.sgi.com/chongo/tech/comp/calc/
 .in -0.5i
 .sp
 One may join the
@@ -623,7 +657,11 @@ One may join the
 testing group by sending a request to:
 .sp
 .in +0.5i
-calc-tester-request@postofc.corp.sgi.com
+.nf
+calc-tester-request at postofc dot corp dot sgi dot com
+
+[[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+.fi
 .in -0.5i
 .sp
 Your message body (not the subject) should consist of:

calc_errno.c

@@ -1,123 +0,0 @@
-/*
- * errno - Determine how to declare errno, sys_errlist and sys_nerr
- *
- * On most machines: errno sys_errlist and sys_nerr are declared
- * by either <stdio.h> and/or <errno.h>.  But some systems declare
- * them somewhere else or do not declare them at all!
- *
- * If the system were doing a proper job in headers, this should declare them:
- *
- *	#include <stdio.h>
- *	#include <errno.h>
- *
- * But one some systems one must explicitly declare them as:
- *
- *	extern int errno;
- *	extern const char *const sys_errlist[];
- *	extern int sys_nerr;
- *
- * and on some old systems they must be explicitly and incorrectly declared as:
- *
- *	extern int errno;
- *	extern char *sys_errlist[];
- *	extern int sys_nerr;
- *
- * The purpose of this utility is try and find the right way to declare
- * them and to output the middle of a header file called calc_errno.h.
- */
-
-/*
- * Copyright (c) 1999 by Landon Curt Noll.  All Rights Reserved.
- *
- * Permission to use, copy, modify, and distribute this software and
- * its documentation for any purpose and without fee is hereby granted,
- * provided that the above copyright, this permission notice and text
- * this comment, and the disclaimer below appear in all of the following:
- *
- *	supporting documentation
- *	source copies
- *	source works derived from this source
- *	binaries derived from this source or from derived source
- *
- * LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
- * EVENT SHALL LANDON CURT NOLL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
- * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
- * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- *
- * chongo was here	/\../\
- */
-
-#include <stdio.h>
-#if defined(TRY_ERRNO_NO_DECL)
-#  include <errno.h>
-#endif /* TRY_ERRNO_NO_DECL */
-
-int
-main(void)
-{
-
-#if defined(TRY_ERRNO_NO_DECL)
-	printf("/*\n");
-	printf(" * The following comments were produced by calc_errno\n");
-	printf(" * in an effort to see if these values were correctly\n");
-	printf(" * declared when calc_errno.c was compiled.\n");
-	printf(" */\n\n");
-	printf("/* Initially errno is %d */\n", errno);
-	printf("/* There are %d entries in sys_errlist[] */\n", sys_nerr);
-	printf("/* The 2nd sys_errlist entry is \"%s\" */\n\n", sys_errlist[1]);
-	printf("/*\n");
-	printf(" * Based on the above, calc_errno now knows\n");
-	printf(" * how to declare errno and friends.\n");
-	printf(" */\n\n");
-	printf("#include <stdio.h>\n");
-	printf("#include <errno.h>\n");
-#elif defined(TRY_ERRNO_OLD_DECL)
-	extern int errno;		/* last system error */
-	extern char *sys_errlist[];	/* system error messages */
-	extern int sys_nerr;		/* number of system errors*/
-
-	printf("/*\n");
-	printf(" * The following comments were produced by calc_errno\n");
-	printf(" * in an effort to see if these values were correctly\n");
-	printf(" * declared when calc_errno.c was compiled.\n");
-	printf(" */\n\n");
-	printf("/* Initially errno is %d */\n", errno);
-	printf("/* There are %d entries in sys_errlist[] */\n", sys_nerr);
-	printf("/* The 2nd sys_errlist entry is \"%s\" */\n\n", sys_errlist[1]);
-	printf("/*\n");
-	printf(" * Based on the above, calc_errno now knows\n");
-	printf(" * how to declare errno and friends.\n");
-	printf(" */\n\n");
-	printf("extern int errno;\t\t/* last system error */\n");
-	printf("extern char *sys_errlist[];\t"
-	       "/* system error messages */\n");
-	printf("extern int sys_nerr;\t\t/* number of system errors*/\n");
-#else	/* assume defined(TRY_ERRNO_STD_DECL) */
-	extern int errno;			/* last system error */
-	extern const char *const sys_errlist[];	/* system error messages */
-	extern int sys_nerr;			/* number of system errors*/
-
-	printf("/*\n");
-	printf(" * The following comments were produced by calc_errno\n");
-	printf(" * in an effort to see if these values were correctly\n");
-	printf(" * declared when calc_errno.c was compiled.\n");
-	printf(" */\n\n");
-	printf("/* Initially errno is %d */\n", errno);
-	printf("/* There are %d entries in sys_errlist[] */\n", sys_nerr);
-	printf("/* The 2nd sys_errlist entry is \"%s\" */\n\n", sys_errlist[1]);
-	printf("/*\n");
-	printf(" * Based on the above, calc_errno now knows\n");
-	printf(" * how to declare errno and friends.\n");
-	printf(" */\n\n");
-	printf("extern int errno;\t\t\t/* last system error */\n");
-	printf("extern const char *const sys_errlist[];\t"
-	       "/* system error messages */\n");
-	printf("extern int sys_nerr;\t\t\t/* number of system errors*/\n");
-#endif
-
-	/* exit(0); */
-	return 0;
-}

calcerr_c.awk

@@ -6,12 +6,12 @@ BEGIN {
     printf(" * names of calc error values\n");
     printf(" */\n");
     printf("CONST char *error_table[E__COUNT+2] = {\n");
-    printf("    \"No error\",\n");
+    printf("	\"No error\",\n");
 }
 {
     print $0;
 }
 END {
-    printf("    NULL\n");
+    printf("	NULL\n");
     printf("};\n");
 }

check.awk

@@ -1,5 +1,5 @@
 # This awk script will print 3 lines before and after any non-blank line that
-# does not begin with a number.  This allows the 'make debug' rule to remove
+# does not begin with a number.	 This allows the 'make debug' rule to remove
 # all non-interest lines the the 'make check' regression output while providing
 # 3 lines of context around unexpected output.
 #
@@ -11,6 +11,7 @@ BEGIN {
     havebuf2=0;
     buf2=0;
     error = 0;
+    end_seen = 0;
 }
 
 NF == 0 {
@@ -29,6 +30,10 @@ NF == 0 {
     next;
 }
 
+/: Ending regression tests$/ {
+    end_seen = 1;
+}
+
 $1 ~ /^[0-9]+:/ {
     if (error > 0) {
 	if (havebuf2) {
@@ -71,7 +76,7 @@ END {
     if (error > 0 && havebuf0) {
 	print buf0;
     }
-    if (error > 0) {
+    if (error > 0 || !end_seen) {
 	exit(1);
     } else {
 	exit(0);

cmath.h

@@ -8,7 +8,7 @@
 
 
 #if !defined(__CMATH_H__)
-#define	__CMATH_H__
+#define __CMATH_H__
 
 
 #include "qmath.h"
@@ -114,7 +114,7 @@ extern COMPLEX *swap_HALF_in_COMPLEX(COMPLEX *dest, COMPLEX *src, BOOL all);
 #define cisnegone(c)	(cisreal(c) && qisnegone((c)->real))
 #define cisrunit(c)	(cisreal(c) && qisunit((c)->real))
 #define cisiunit(c)	(qiszero((c)->real) && qisunit((c)->imag))
-#define	cisunit(c)	(cisrunit(c) || cisiunit(c))
+#define cisunit(c)	(cisrunit(c) || cisiunit(c))
 #define cistwo(c)	(cisreal(c) && qistwo((c)->real))
 #define cisint(c)	(qisint((c)->real) && qisint((c)->imag))
 #define ciseven(c)	(qiseven((c)->real) && qiseven((c)->imag))

codegen.c

@@ -32,8 +32,8 @@ static void getfunction(void);
 static void ungetfunction(void);
 static void getbody(LABEL *contlabel, LABEL *breaklabel,
 		    LABEL *nextcaselabel, LABEL *defaultlabel);
-static void getdeclarations(int symtype);
-static void getsimpledeclaration (int symtype);
+static int getdeclarations(int symtype);
+static int getsimpledeclaration (int symtype);
 static int getonevariable (int symtype);
 static void getstatement(LABEL *contlabel, LABEL *breaklabel,
 			 LABEL *nextcaselabel, LABEL *defaultlabel);
@@ -180,8 +180,8 @@ getcommands(BOOL toplevel)
 /*
  * Evaluate a line of statements.
  * This is done by treating the current line as a function body,
- * compiling it, and then executing it.  Returns TRUE if the line
- * successfully compiled and executed.  The last expression result
+ * compiling it, and then executing it.	 Returns TRUE if the line
+ * successfully compiled and executed.	The last expression result
  * is saved in the f_savedvalue element of the current function.
  * The nestflag variable should be FALSE for the outermost evaluation
  * level, and TRUE for all other calls (such as the 'eval' function).
@@ -256,9 +256,15 @@ ungetfunction(void)
 			case T_MULT:
 				rmalluserfunc();
 				continue;
-			default:
+			case T_NEWLINE:
+			case T_SEMICOLON:
+			case T_EOF:
 				rescantoken();
 				return;
+			default:
+				scanerror(T_SEMICOLON,
+					 "Non-name arg for undefine");
+				return;
 		}
 	}
 }
@@ -382,7 +388,7 @@ getbody(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *defaul
 			return;
 
 		case T_EOF:
-			scanerror(T_SEMICOLON, "End-of-file in function body");
+			scanerror(T_NULL, "End-of-file in function body");
 			return;
 
 		default:
@@ -398,9 +404,11 @@ getbody(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *defaul
  * declarations = { LOCAL | GLOBAL | STATIC } onedeclaration
  *	[ ',' onedeclaration ] ... ';'.
  */
-static void
+static int
 getdeclarations(int symtype)
 {
+	int res = 0;
+
 	while (TRUE) {
 		switch (gettoken()) {
 			case T_COMMA:
@@ -411,28 +419,31 @@ getdeclarations(int symtype)
 			case T_RIGHTBRACE:
 			case T_EOF:
 				rescantoken();
-				return;
+				return res;
 
 			case T_SYMBOL:
 				addopone(OP_DEBUG, linenumber());
 				rescantoken();
-				getsimpledeclaration(symtype);
+				if (getsimpledeclaration(symtype))
+					res = 1;
 				break;
 
 			case T_MAT:
 				addopone(OP_DEBUG, linenumber());
 				getmatdeclaration(symtype);
+				res = 1;
 				break;
 
 			case T_OBJ:
 				addopone(OP_DEBUG, linenumber());
 				getobjdeclaration(symtype);
 				addop(OP_POP);
+				res = 1;
 				break;
 
 			default:
 				scanerror(T_SEMICOLON, "Bad syntax in declaration statement");
-				return;
+				return res;
 		}
 	}
 }
@@ -444,22 +455,24 @@ getdeclarations(int symtype)
  * Subsequences end with "," or at end of line; spaces indicate
  * repeated assignment, e.g. "c d = 2" has the effect of "c = 2, d = 2".
  */
-static void
+static int
 getsimpledeclaration(int symtype)
 {
+	int res = 0;
 
 	for (;;) {
 		switch (gettoken()) {
 			case T_SYMBOL:
 				rescantoken();
-				if (getonevariable(symtype))
+				res = getonevariable(symtype);
+				if (res)
 					addop(OP_POP);
 				continue;
 			case T_COMMA:
 				continue;
 			default:
 				rescantoken();
-				return;
+				return res;
 		}
 	}
 }
@@ -508,11 +521,9 @@ getonevariable(int symtype)
  *	| BREAK ';'
  *	| RETURN assignment ';'
  *	| GOTO label ';'
- *	| MAT name '[' value [ ':' value ] [',' value [ ':' value ] ] ']' ';'
- *	| OBJ type '{' arg [ ',' arg ] ... '}' ] ';'
- *	| OBJ type name [ ',' name ] ';'
  *	| PRINT assignment [, assignment ] ... ';'
  *	| QUIT [ string ] ';'
+ *	| ABORT [ string ] ';'
  *	| SHOW item ';'
  *	| body
  *	| assignment ';'
@@ -541,18 +552,20 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 		return;
 
 	case T_GLOBAL:
-		getdeclarations(SYM_GLOBAL);
+		(void) getdeclarations(SYM_GLOBAL);
 		break;
 
 	case T_STATIC:
 		clearlabel(&label);
 		addoplabel(OP_INITSTATIC, &label);
-		getdeclarations(SYM_STATIC);
-		setlabel(&label);
+		if (getdeclarations(SYM_STATIC))
+			setlabel(&label);
+		else
+			curfunc->f_opcodecount -= 2;
 		break;
 
 	case T_LOCAL:
-		getdeclarations(SYM_LOCAL);
+		(void) getdeclarations(SYM_LOCAL);
 		break;
 
 	case T_RIGHTBRACE:
@@ -692,14 +705,14 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 			}
 		}
 		if (gettoken() != T_RIGHTPAREN) {	/* have 'c' part */
-			if (label1.l_offset <= 0)
+			if (label1.l_offset < 0)
 				addoplabel(OP_JUMP, &label3);
 			setlabel(&label2);
 			contlabel = &label2;
 			rescantoken();
 			(void) getexprlist();
 			addop(OP_POP);
-			if (label1.l_offset > 0)
+			if (label1.l_offset >= 0)
 				addoplabel(OP_JUMP, &label1);
 			if (gettoken() != T_RIGHTPAREN) {
 				(void) tokenmode(oldmode);
@@ -719,15 +732,21 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 	case T_WHILE:
 		oldmode = tokenmode(TM_DEFAULT);
 		contlabel = &label1;
-		breaklabel = &label2;
 		clearlabel(contlabel);
-		clearlabel(breaklabel);
 		setlabel(contlabel);
 		getcondition();
-		addoplabel(OP_JUMPZ, breaklabel);
-		getstatement(contlabel, breaklabel, NULL_LABEL, NULL_LABEL);
-		addoplabel(OP_JUMP, contlabel);
-		setlabel(breaklabel);
+		if (gettoken() != T_SEMICOLON) {
+			breaklabel = &label2;
+			clearlabel(breaklabel);
+			addoplabel(OP_JUMPZ, breaklabel);
+			rescantoken();
+			getstatement(contlabel, breaklabel,
+				NULL_LABEL, NULL_LABEL);
+			addoplabel(OP_JUMP, contlabel);
+			setlabel(breaklabel);
+		} else {
+			addoplabel(OP_JUMPNZ, contlabel);
+		}
 		(void) tokenmode(oldmode);
 		return;
 
@@ -937,7 +956,7 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 /*
  * Read in an object declaration.
  * This is of the following form:
- *	OBJ type [ '{' id [ ',' id ] ... '}' ]  [ objlist ].
+ *	OBJ type [ '{' id [ ',' id ] ... '}' ]	[ objlist ].
  * The OBJ keyword has already been read.  Symtype is SYM_UNDEFINED if this
  * is an OBJ statement, otherwise this is part of a declaration which will
  * define new symbols with the specified type.
@@ -995,7 +1014,11 @@ getobjdeclaration(int symtype)
 				/*FALLTHRU*/
 			case T_RIGHTBRACE:
 				(void) tokenmode(oldmode);
-				(void) defineobject(name, indices, count);
+				if (defineobject(name, indices, count)) {
+					scanerror(T_NULL,
+				"Object type \"%s\" is already defined", name);
+					return;
+				}
 				getobjvars(name, symtype);
 				return;
 			case T_NEWLINE:
@@ -1034,18 +1057,14 @@ getoneobj(long index, int symtype)
 }
 
 /*
- * Routine to collect a set of variables for the specified object type
- * and initialize them as being that type of object.
- * Here
- *	objlist = name initlist [ ',' name initlist ] ... ';'.
- * If symtype is SYM_UNDEFINED, then this is an OBJ statement where the
- * values can be any variable expression, and no symbols are to be defined.
- * Otherwise this is part of a declaration, and the variables must be raw
- * symbol names which are defined with the specified symbol type.
+ * Routine to assign a specified object-type value to each of a set of
+ * variables in a "global", "local" or "static" declaration, or, if
+ * symtype is SYM_UNDEFINED, to create one object value of the specified
+ * type.
  *
  * given:
  *	name		object name
- *	symtype		type of symbol to collect for
+ *	symtype		declaration type
  */
 static void
 getobjvars(char *name, int symtype)
@@ -1059,6 +1078,8 @@ getobjvars(char *name, int symtype)
 	}
 	for (;;) {
 		getoneobj(index, symtype);
+		if (symtype == SYM_UNDEFINED)
+			return;
 		if (gettoken() != T_COMMA) {
 			rescantoken();
 			return;
@@ -1284,7 +1305,7 @@ getcondition(void)
 
 /*
  * Get an expression list consisting of one or more expressions,
- * separated by commas.  The value of the list is that of the final expression.
+ * separated by commas.	 The value of the list is that of the final expression.
  * This is the top level routine for parsing expressions.
  * Returns flags describing the type of the last assignment or expression found.
  * exprlist = assignment [ ',' assignment ] ...
@@ -1338,8 +1359,8 @@ getopassignment(void)
 		case T_MODEQUALS:	op = OP_MOD; break;
 		case T_ANDEQUALS:	op = OP_AND; break;
 		case T_OREQUALS:	op = OP_OR; break;
-		case T_LSHIFTEQUALS: 	op = OP_LEFTSHIFT; break;
-		case T_RSHIFTEQUALS: 	op = OP_RIGHTSHIFT; break;
+		case T_LSHIFTEQUALS:	op = OP_LEFTSHIFT; break;
+		case T_RSHIFTEQUALS:	op = OP_RIGHTSHIFT; break;
 		case T_POWEREQUALS:	op = OP_POWER; break;
 		case T_HASHEQUALS:	op = OP_HASHOP; break;
 		case T_TILDEEQUALS:	op = OP_XOR; break;
@@ -1350,7 +1371,7 @@ getopassignment(void)
 			return type;
 	}
 	if (isrvalue(type)) {
-		scanerror(T_NULL, "Illegal assignment in getopassignment");
+		scanerror(T_NULL, "Illegal assignment");
 		(void) getopassignment();
 		return (EXPR_RVALUE | EXPR_ASSIGN);
 	}
@@ -1379,8 +1400,8 @@ getopassignment(void)
 			case T_MODEQUALS:	op = OP_MOD; break;
 			case T_ANDEQUALS:	op = OP_AND; break;
 			case T_OREQUALS:	op = OP_OR; break;
-			case T_LSHIFTEQUALS: 	op = OP_LEFTSHIFT; break;
-			case T_RSHIFTEQUALS: 	op = OP_RIGHTSHIFT; break;
+			case T_LSHIFTEQUALS:	op = OP_LEFTSHIFT; break;
+			case T_RSHIFTEQUALS:	op = OP_RIGHTSHIFT; break;
 			case T_POWEREQUALS:	op = OP_POWER; break;
 			case T_HASHEQUALS:	op = OP_HASHOP; break;
 			case T_TILDEEQUALS:	op = OP_XOR; break;
@@ -1443,7 +1464,7 @@ getassignment (void)
 			return type;
 	}
 	if (isrvalue(type)) {
-		scanerror(T_SEMICOLON, "Illegal assignment in getassignment");
+		scanerror(T_SEMICOLON, "Illegal assignment");
 		(void) getassignment();
 		return (EXPR_RVALUE | EXPR_ASSIGN);
 	}
@@ -1725,7 +1746,7 @@ getshiftexpr(void)
 		case T_NOT:		op = OP_NOT; break;
 		case T_DIV:		op = OP_INVERT; break;
 		case T_BACKSLASH:	op = OP_BACKSLASH; break;
-		case T_TILDE: 		op = OP_COMP; break;
+		case T_TILDE:		op = OP_COMP; break;
 		case T_HASH:		op = OP_CONTENT; break;
 	}
 	if (op) {
@@ -1738,7 +1759,7 @@ getshiftexpr(void)
 	switch (gettoken()) {
 		case T_POWER:		op = OP_POWER; break;
 		case T_LEFTSHIFT:	op = OP_LEFTSHIFT; break;
-		case T_RIGHTSHIFT: 	op = OP_RIGHTSHIFT; break;
+		case T_RIGHTSHIFT:	op = OP_RIGHTSHIFT; break;
 		default:
 			rescantoken();
 			return type;
@@ -1902,11 +1923,6 @@ getterm(void)
 
 		case T_MAT:
 			getonematrix(SYM_UNDEFINED);
-			while (gettoken() == T_COMMA) {
-				addop(OP_POP);
-				getonematrix(SYM_UNDEFINED);
-			}
-			rescantoken();
 			type = EXPR_ASSIGN;
 			break;
 
@@ -2171,7 +2187,7 @@ getmatargs(void)
 	/*
 	 * Normal indexing with the indexes separated by commas.
 	 * Initialize the flag in the opcode to assume that the array
-	 * element will only be referenced for reading.  If the parser
+	 * element will only be referenced for reading.	 If the parser
 	 * finds that the element will be referenced for writing, then
 	 * it will call writeindexop to change the flag in the opcode.
 	 */

comfunc.c

@@ -138,38 +138,6 @@ csqrt(COMPLEX *c, NUMBER *epsilon, long R)
 
 	up1 = up2 = 0;
 	sign = (R & 64) != 0;
-#if 0
-	if (qiszero(epsilon)) {
-		aes = qsquare(c->real);
-		bes = qsquare(c->imag);
-		v = qqadd(aes, bes);
-		qfree(aes);
-		qfree(bes);
-		u = qsqrt(v, epsilon, 0);
-		qfree(v);
-		if (qiszero(u)) {
-			qfree(u);
-			return clink(&_czero_);
-		}
-		aes = qqadd(u, c->real);
-		qfree(u);
-		bes = qscale(aes, -1);
-		qfree(aes);
-		u = qsqrt(bes, epsilon, R);
-		qfree(bes);
-		if (qiszero(u)) {
-			qfree(u);
-			return clink(&_czero_);
-		}
-		aes = qscale(c->imag, -1);
-		v = qqdiv(aes, u);
-		qfree(aes);
-		r = comalloc();
-		r->real = u;
-		r->imag = v;
-		return r;
-	}
-#endif
 	imsign = c->imag->num.sign;
 	es = qsquare(epsilon);
 	aes = qqdiv(c->real, es);
@@ -255,8 +223,7 @@ csqrt(COMPLEX *c, NUMBER *epsilon, long R)
 			up2 = -1;
 		zfree(tmp1);
 		zfree(aa);
-	}
-	else {
+	} else {
 		s1 = zsqrt(tmp3, &cc, 0);
 		zfree(tmp3);
 		zadd(cc, a, &tmp1);
@@ -333,9 +300,9 @@ csqrt(COMPLEX *c, NUMBER *epsilon, long R)
 		zfree(mul2);
 		mul2 = tmp2;
 	}
-	if (ziszero(mul1))
+	if (ziszero(mul1)) {
 		u = qlink(&_qzero_);
-	else {
+	} else {
 		mul1.sign = sign ^ epsilon->num.sign;
 		u = qalloc();
 		zreduce(mul1, epsilon->den, &tmp2, &u->den);
@@ -343,9 +310,9 @@ csqrt(COMPLEX *c, NUMBER *epsilon, long R)
 		zfree(tmp2);
 	}
 	zfree(mul1);
-	if (ziszero(mul2))
+	if (ziszero(mul2)) {
 		v = qlink(&_qzero_);
-	else {
+	} else {
 		mul2.sign = imsign ^ sign ^ epsilon->num.sign;
 		v = qalloc();
 		zreduce(mul2, epsilon->den, &tmp2, &v->den);
@@ -1147,5 +1114,3 @@ cprintfr(COMPLEX *c)
 		zprintval(i->den, 0L, 0L);
 	}
 }
-
-/* END CODE */

commath.c

@@ -69,7 +69,7 @@ csub(COMPLEX *c1, COMPLEX *c2)
 /*
  * Multiply two complex numbers.
  * This saves one multiplication over the obvious algorithm by
- * trading it for several extra additions, as follows.  Let
+ * trading it for several extra additions, as follows.	Let
  *	q1 = (a + b) * (c + d)
  *	q2 = a * c
  *	q3 = b * d

config.c

@@ -48,7 +48,7 @@ NAMETYPE configs[] = {
 	    {"maxerr",	CONFIG_MAXSCAN},	/* old name for maxscan */
 	{"prompt",	CONFIG_PROMPT},
 	{"more",	CONFIG_MORE},
-	{"blkmaxprint",	CONFIG_BLKMAXPRINT},
+	{"blkmaxprint", CONFIG_BLKMAXPRINT},
 	{"blkverbose",	CONFIG_BLKVERBOSE},
 	{"blkbase",	CONFIG_BLKBASE},
 	{"blkfmt",	CONFIG_BLKFMT},
@@ -96,7 +96,7 @@ CONFIG oldstd = {	/* backward compatible standard configuration */
 	BLK_FMT_HD_STYLE,	/* block output format */
 	0,			/* internal calc debug level */
 	3,			/* calc library debug level */
-	0, 			/* user defined debug level */
+	0,			/* user defined debug level */
 	TRUE			/* print Quit or abort executed messages */
 };
 CONFIG newstd = {	/* new non-backward compatible configuration */
@@ -132,7 +132,7 @@ CONFIG newstd = {	/* new non-backward compatible configuration */
 	BLK_FMT_HD_STYLE,	/* block output format */
 	0,			/* internal calc debug level */
 	3,			/* calc library debug level */
-	0, 			/* user defined debug level */
+	0,			/* user defined debug level */
 	TRUE			/* print Quit or abort executed messages */
 };
 CONFIG *conf = NULL;	/* loaded in at startup - current configuration */
@@ -148,7 +148,7 @@ static NAMETYPE modes[] = {
 	{"int",		MODE_INT},
 	{"real",	MODE_REAL},
 	{"exp",		MODE_EXP},
-	{"hexadecimal",	MODE_HEX},
+	{"hexadecimal", MODE_HEX},
 	{"hex",		MODE_HEX},
 	{"octal",	MODE_OCTAL},
 	{"oct",		MODE_OCTAL},
@@ -184,7 +184,7 @@ static NAMETYPE truth[] = {
  * Possible block base output modes
  */
 static NAMETYPE blk_base[] = {
-	{"hexadecimal",	BLK_BASE_HEX},
+	{"hexadecimal", BLK_BASE_HEX},
 	{"hex",		BLK_BASE_HEX},
 	{"octal",	BLK_BASE_OCT},
 	{"oct",		BLK_BASE_OCT},
@@ -361,7 +361,7 @@ setconfig(int type, VALUE *vp)
 
 	switch (type) {
 	case CONFIG_ALL:
-		newconf = NULL;	/* firewall */
+		newconf = NULL; /* firewall */
 		if (vp->v_type == V_STR) {
 			if (strcmp(vp->v_str->s_str, "oldstd") == 0) {
 				newconf = &oldstd;
@@ -1000,6 +1000,7 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 	 * convert element to value
 	 */
 	vp->v_type = V_NUM;
+	vp->v_subtype = V_NOSUBTYPE;
 	switch (type) {
 	case CONFIG_ALL:
 		vp->v_type = V_CONFIG;

config.h

@@ -20,16 +20,16 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  * Prior to calc 2.9.3t9, these routines existed as a calc library called
- * cryrand.cal.  They have been rewritten in C for performance as well
+ * cryrand.cal.	 They have been rewritten in C for performance as well
  * as to make them available directly from libcalc.a.
  *
  * Comments, suggestions, bug fixes and questions about these routines
- * are welcome.  Send EMail to the address given below.
+ * are welcome.	 Send EMail to the address given below.
  *
  * Happy bit twiddling,
  *
- *      Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	Landon Curt Noll
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */
@@ -52,11 +52,11 @@
 #define CONFIG_EPSILON	3
 #define CONFIG_EPSILONPREC 3	/* not a real type -- tied to CONFIG_EPSILON */
 #define CONFIG_TRACE	4
-#define CONFIG_MAXPRINT	5
-#define	CONFIG_MUL2	6
-#define	CONFIG_SQ2	7
-#define	CONFIG_POW2	8
-#define	CONFIG_REDC2	9
+#define CONFIG_MAXPRINT 5
+#define CONFIG_MUL2	6
+#define CONFIG_SQ2	7
+#define CONFIG_POW2	8
+#define CONFIG_REDC2	9
 #define CONFIG_TILDE	10
 #define CONFIG_TAB	11
 #define CONFIG_QUOMOD	12
@@ -66,10 +66,10 @@
 #define CONFIG_APPR	16
 #define CONFIG_CFAPPR	17
 #define CONFIG_CFSIM	18
-#define CONFIG_OUTROUND	19
+#define CONFIG_OUTROUND 19
 #define CONFIG_ROUND	20
-#define CONFIG_LEADZERO	21
-#define CONFIG_FULLZERO	22
+#define CONFIG_LEADZERO 21
+#define CONFIG_FULLZERO 22
 #define CONFIG_MAXSCAN	23
 #define CONFIG_PROMPT	24
 #define CONFIG_MORE	25
@@ -87,7 +87,7 @@
  * config default symbols
  */
 #define DISPLAY_DEFAULT 20	/* default digits for float display */
-#define EPSILON_DEFAULT "1e-20"	/* allowed error for float calculations */
+#define EPSILON_DEFAULT "1e-20" /* allowed error for float calculations */
 #define EPSILONPREC_DEFAULT 67	/* 67 ==> 2^-67 <= EPSILON_DEFAULT < 2^-66 */
 #define NEW_EPSILON_DEFAULT "1e-10"	/* newstd EPSILON_DEFAULT */
 #define NEW_EPSILONPREC_DEFAULT 34	/* 34 ==> 2^-34 <= 1e-10 < 2^-33 */
@@ -140,7 +140,7 @@ struct config {
 	long user_debug;	/* user defined debug value: 0 default */
 	BOOL verbose_quit;	/* TRUE => print Quit or abort executed msg */
 };
-typedef	struct config CONFIG;
+typedef struct config CONFIG;
 
 
 /*

custom.c

@@ -20,12 +20,12 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  * Comments, suggestions, bug fixes and questions about these routines
- * are welcome.  Send EMail to the address given below.
+ * are welcome.	 Send EMail to the address given below.
  *
  * Happy bit twiddling,
  *
  *	Landon Curt Noll
- *	http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */
@@ -117,7 +117,7 @@ showcustom(void)
 {
 #if defined(CUSTOM)
 
-	CONST struct custom *p;	/* current function */
+	CONST struct custom *p; /* current function */
 
 	/*
 	 * disable custom functions unless -C was given

custom.h

@@ -20,16 +20,16 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  * Prior to calc 2.9.3t9, these routines existed as a calc library called
- * cryrand.cal.  They have been rewritten in C for performance as well
+ * cryrand.cal.	 They have been rewritten in C for performance as well
  * as to make them available directly from libcalc.a.
  *
  * Comments, suggestions, bug fixes and questions about these routines
- * are welcome.  Send EMail to the address given below.
+ * are welcome.	 Send EMail to the address given below.
  *
  * Happy bit twiddling,
  *
- *      Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	Landon Curt Noll
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */

custom/CUSTOM_CAL

@@ -19,7 +19,7 @@
 # OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 # PERFORMANCE OF THIS SOFTWARE.
 #
-# chongo was here	/\../\		http://reality.sgi.com/chongo
+# chongo was here	/\../\		http://reality.sgi.com/chongo/
 
 The following custom calc library files are provided because they serve
 as examples of how use the custom interface.  The custom interface

custom/HOW_TO_ADD

@@ -6,7 +6,7 @@ Step 0: Determine if is should it be done?
     multi-precision calculations in a C-like environment.  You should
     consider implementing algorithms in the calc language as a first
     choice.  Sometimes an algorithm requires use of special hardware, a
-    non-portable OS or pre-compiled C library.  In these cases a custom
+    non-portable OS or pre-compiled C library.	In these cases a custom
     interface may be needed.
 
     The custom function interface is intended to make is easy for
@@ -184,7 +184,7 @@ Step 5: Write your custom function
 	   The 3 args are passed in by the custom interface
 	   and have the following meaning:
 
-		name    The name of the custom function that
+		name	The name of the custom function that
 			was called.  In particular, this is the first
 			string arg that was given to the custom()
 			builtin.  This is the equivalent of argv[0] for
@@ -215,11 +215,11 @@ Step 5: Write your custom function
 
 			    custom("curds", a, b, c)
 
-		        would cause vals to point to the following array:
+			would cause vals to point to the following array:
 
-			    vals[0]  points to  a
-			    vals[1]  points to  b
-			    vals[2]  points to  c
+			    vals[0]  points to	a
+			    vals[1]  points to	b
+			    vals[2]  points to	c
 
 	c) The return value is the function must be a VALUE.
 
@@ -247,7 +247,7 @@ Step 5: Write your custom function
 
     The VALUE is a union of major value types found inside calc.
     The v_type VALUE element determines which union element is
-    being used.   Assume that we have:
+    being used.	  Assume that we have:
 
 	VALUE *vp;
 
@@ -427,12 +427,12 @@ Step 6: Register the function in the custom interface table
     level Makefile, one does not have unsatisfied symbols.
 
     The brief description should be brief so that 'show custom' looks well
-    formatted.  If the brief description cannot fit on the same line as
+    formatted.	If the brief description cannot fit on the same line as
     the name without wrapping on a 80 col window, the description is
     probably too long and will not look nice in the show custom output.
 
     The minargs places a lower bound on the number of args that
-    must be supplied to the interface.  This does NOT count
+    must be supplied to the interface.	This does NOT count
     the name argument given to custom().  So if minargs is 2:
 
 	custom("curds")		/* call blocked at high level interface */

custom/Makefile

@@ -22,12 +22,12 @@
 # PERFORMANCE OF THIS SOFTWARE.
 #
 # Comments, suggestions, bug fixes and questions about these routines
-# are welcome.  Send EMail to the address given below.
+# are welcome.	Send EMail to the address given below.
 #
 # Happy bit twiddling,
 #
 #      Landon Curt Noll
-#      http://reality.sgi.com/chongo
+#      http://reality.sgi.com/chongo/
 #
 # chongo <was here> /\../\
 
@@ -146,7 +146,7 @@ DEBUG= -O
 #	BSD	    NO_SHARED=
 #	SYSV	    NO_SHARED= -dn
 #	IRIX	    NO_SHARED= -non_shared
-#	disable     NO_SHARED=
+#	disable	    NO_SHARED=
 #
 # If in doubt, use NO_SHARED=
 #
@@ -168,7 +168,7 @@ RANLIB=:
 # a default here just in case you want to build from this directory.
 #
 # Normally certain files depend on the Makefile.  If the Makefile is
-# changed, then certain steps should be redone.  If MAKE_FILE is
+# changed, then certain steps should be redone.	 If MAKE_FILE is
 # set to Makefile, then these files will depend on Makefile.  If
 # MAKE_FILE is empty, they they wont.
 #
@@ -192,7 +192,7 @@ MAKE_FILE= Makefile
 #
 # By default, custom builtin functions may only be executed if calc
 # is given the -C option.  This is because custom builtin functions
-# may invoke non-standard or non-portable code.  One may completely
+# may invoke non-standard or non-portable code.	 One may completely
 # disable custom builtin functions by not compiling any of code
 #
 # ALLOW_CUSTOM= -DCUSTOM	# allow custom only if -C is given
@@ -310,6 +310,15 @@ libcustcalc.a: ${CUSTCALC_OBJ} ${MAKE_FILE} ../Makefile
 	ar qc libcustcalc.a ${CUSTCALC_OBJ}
 	${RANLIB} libcustcalc.a
 
+##
+#
+# Special .o files
+#
+##
+
+c_sysinfo.o: c_sysinfo.c ${MAKE_FILE}
+	${CC} ${CFLAGS} c_sysinfo.c -c
+
 ##
 #
 # used by the upper level Makefile
@@ -324,28 +333,24 @@ libcustcalc.a: ${CUSTCALC_OBJ} ${MAKE_FILE} ../Makefile
 
 ##
 #
-# File list generation.  You can ignore this section.
+# File list generation.	 You can ignore this section.
 #
 #
 # We will form the names of source files as if they were in a
 # sub-directory called calc/lib.
 #
 # NOTE: Due to bogus shells found on one common system we must have
-#       an non-emoty else clause for every if condition.  *sigh*
+#	an non-emoty else clause for every if condition.  *sigh*
 #
 ##
 
 distlist: ${DISTLIST}
 	${Q}for i in ${DISTLIST}; do \
-		echo calc/custom/$$i; \
+		echo custom/$$i; \
 	done
 
-# The bsdi distribution has generated files as well as distributed files.
-#
-bsdilist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
-		echo calc/custom/$$i; \
-	done
+distdir:
+	${Q}echo custom
 
 ##
 #
@@ -371,7 +376,7 @@ depend:
 	${Q}mkdir skel
 	${Q}mkdir skel/custom
 	-${Q}for i in ${C_SRC}; do \
-		${SED} -n '/^#[	 ]*include[ 	]*"/p' \
+		${SED} -n '/^#[	 ]*include[	]*"/p' \
 		    "$$i" > "skel/custom/$$i"; \
 	done
 	-${Q}for i in /dev/null ${H_SRC}; do \
@@ -419,12 +424,12 @@ depend:
 	else \
 		rm -f Makefile.tmp; \
 		mv Makefile Makefile.tmp; \
-		if [ -d RCS ]; then; \
+		if [ -d RCS ]; then \
 		    co -l Makefile; \
 		fi ;\
 		mv Makefile.tmp Makefile; \
-		if [ -d RCS ]; then; \
-		echo new custom Makefile formed '--' you need to check it in'; \
+		if [ -d RCS ]; then \
+		echo 'new custom Makefile formed -- you need to check it in'; \
 		fi; \
 	fi
 

custom/argv

@@ -23,11 +23,11 @@ DESCRIPTION
 EXAMPLE
     > foo=5^713; bar=17; baz=list(2,3,4);
     > custom("argv", foo, bar, baz, 3+4.5i, pi())
-	    arg[0]  rational_value          size=1  sizeof=272
-	    arg[1]  rational_value          size=1  sizeof=68
-	    arg[2]  list                    size=3  sizeof=256
-	    arg[3]  complex_value           size=1  sizeof=140
-	    arg[4]  rational_value          size=1  sizeof=84
+	    arg[0]  rational_value	    size=1  sizeof=272
+	    arg[1]  rational_value	    size=1  sizeof=68
+	    arg[2]  list		    size=3  sizeof=256
+	    arg[3]  complex_value	    size=1  sizeof=140
+	    arg[4]  rational_value	    size=1  sizeof=84
 	    5
 
 LIMITS

custom/argv.cal

@@ -10,7 +10,7 @@
  * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
  * PERFORMANCE OF THIS SOFTWARE.
  *
- * chongo was here	/\../\		http://reality.sgi.com/chongo
+ * chongo was here	/\../\		http://reality.sgi.com/chongo/
  */
 /*
  * argv - print information about various args

custom/c_argv.c

@@ -11,12 +11,12 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  * Comments, suggestions, bug fixes and questions about these routines
- * are welcome.  Send EMail to the address given below.
+ * are welcome.	 Send EMail to the address given below.
  *
  * Happy bit twiddling,
  *
- *      Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	Landon Curt Noll
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */
@@ -98,13 +98,13 @@ c_argv(char *name, int count, VALUE **vals)
 		case V_FILE:	/* opened file id */
 			type = "file";
 			break;
-		case V_RAND:    /* address of additive 55 random state */
+		case V_RAND:	/* address of additive 55 random state */
 			type = "rand_state";
 			break;
-		case V_RANDOM:  /* address of Blum random state */
+		case V_RANDOM:	/* address of Blum random state */
 			type = "random_state";
 			break;
-		case V_CONFIG:  /* configuration state */
+		case V_CONFIG:	/* configuration state */
 			type = "config_state";
 			break;
 		case V_HASH:	/* hash state */
@@ -115,7 +115,7 @@ c_argv(char *name, int count, VALUE **vals)
 			break;
 #if 0
 		/* XXX - V_OCTET is subject to change */
-		case V_OCTET: 	/* octet (unsigned char) */
+		case V_OCTET:	/* octet (unsigned char) */
 			type = "octet";
 			break;
 #endif

custom/c_devnull.c

@@ -11,12 +11,12 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  * Comments, suggestions, bug fixes and questions about these routines
- * are welcome.  Send EMail to the address given below.
+ * are welcome.	 Send EMail to the address given below.
  *
  * Happy bit twiddling,
  *
- *      Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	Landon Curt Noll
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */

custom/c_help.c

@@ -11,12 +11,12 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  * Comments, suggestions, bug fixes and questions about these routines
- * are welcome.  Send EMail to the address given below.
+ * are welcome.	 Send EMail to the address given below.
  *
  * Happy bit twiddling,
  *
- *      Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	Landon Curt Noll
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */

custom/c_pzasusb8.c

@@ -2,7 +2,7 @@
  * Permission to use, copy, modify, and distribute this software and
  * its documentation for any purpose and without fee is hereby granted.
  *
- *            Ernest Bowen, following Landon Curt Noll
+ *	      Ernest Bowen, following Landon Curt Noll
  */
 
 #if defined(CUSTOM)
@@ -20,7 +20,7 @@
  *
  * given:
  *    count = 1;
- *    vals[0]   real number;
+ *    vals[0]	real number;
  *
  * returns:
  *    null
@@ -29,7 +29,7 @@
 VALUE
 c_pzasusb8(char *name, int count, VALUE **vals)
 {
-	VALUE result;           /* what we will return */
+	VALUE result;		/* what we will return */
 	ZVALUE z;		/* numerator of the value */
 	long half_cnt;		/* number of HALFs in the numerator */
 	USB8 *h;		/* octet pointer */

custom/c_sysinfo.c

@@ -11,12 +11,12 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  * Comments, suggestions, bug fixes and questions about these routines
- * are welcome.  Send EMail to the address given below.
+ * are welcome.	 Send EMail to the address given below.
  *
  * Happy bit twiddling,
  *
- *      Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	Landon Curt Noll
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */
@@ -33,6 +33,7 @@
 #include "../config.h"
 #include "../calc.h"
 #include "../longbits.h"
+#define CHECK_L_FORMAT
 #include "../longlong.h"
 #include "../block.h"
 #include "../calcerr.h"
@@ -108,7 +109,6 @@ static struct infoname sys_info[] = {
     {"MAXLABELS", "max number of user labels in function", NULL, (FULL)MAXLABELS},
     {"MAXLEN", "longest storage size allowed", NULL, (FULL)MAXLEN},
     {"MAXLONG", "largest long val", NULL, (FULL)MAXLONG},
-    {"MAXOBJECTS", "max number of object types", NULL, (FULL)MAXOBJECTS},
     {"MAXPRINT_DEFAULT", "default number of elements printed", NULL, (FULL)MAXPRINT_DEFAULT},
     {"MAXREDC", "number of entries in REDC cache", NULL, (FULL)MAXREDC},
     {"MAXSCANCOUNT", "default max scan errors before an abort", NULL, (FULL)MAXSCANCOUNT},
@@ -307,17 +307,33 @@ static void
 dump_name_value(void)
 {
 	struct infoname *p;	/* current infoname */
+	char *fmt;		/* printf value format */
 
 	/* dump the entire table */
 	for (p = sys_info; p->name != NULL; ++p) {
 		if (p->str == NULL) {
 #if LONG_BITS == FULL_BITS || FULL_BITS == 32 || !defined(HAVE_LONGLONG)
-			printf("%s%-23s\t%-8lu\t(0x%lx)\n",
+			fmt = "%s%-23s\t%-8lu\t(0x%lx)\n";
+			printf(fmt,
 			    (conf->tab_ok ? "\t" : ""), p->name,
 			    (unsigned long)p->nmbr,
 			    (unsigned long)p->nmbr);
 #else
-			printf("%s%-23s\t%-8llu\t(0x%llx)\n",
+			/*
+			 * Determine of %ld can print a 64 bit long long.
+			 *
+			 * Some systems that can make use of %ld to print a
+			 * a 64 bit value do not support the %lld type.
+			 * So we will only try %lld if %ld does not work.
+			 */
+			if (l_format < 0) {
+				/* %ld prints lower 32 bits only, use %lld */
+				fmt = "%s%-23s\t%-8llu\t(0x%llx)\n";
+			} else {
+				/* %ld prints all 64 bits, use %ld */
+				fmt = "%s%-23s\t%-8lu\t(0x%lx)\n";
+			}
+			printf(fmt,
 			    (conf->tab_ok ? "\t" : ""), p->name,
 			    (unsigned long long)p->nmbr,
 			    (unsigned long long)p->nmbr);
@@ -338,17 +354,33 @@ static void
 dump_mening_value(void)
 {
 	struct infoname *p;	/* current infoname */
+	char *fmt;		/* printf value format */
 
 	/* dump the entire table */
 	for (p = sys_info; p->name != NULL; ++p) {
 		if (p->str == NULL) {
 #if LONG_BITS == FULL_BITS || FULL_BITS == 32 || !defined(HAVE_LONGLONG)
-			printf("%s%-36.36s\t%-8lu\t(0x%lx)\n",
+			fmt = "%s%-36.36s\t%-8lu\t(0x%lx)\n";
+			printf(fmt,
 			    (conf->tab_ok ? "\t" : ""), p->meaning,
 			    (unsigned long)p->nmbr,
 			    (unsigned long)p->nmbr);
 #else
-			printf("%s%-36.36s\t%-8llu\t(0x%llx)\n",
+			/*
+			 * Determine of %ld can print a 64 bit long long.
+			 *
+			 * Some systems that can make use of %ld to print a
+			 * a 64 bit value do not support the %lld type.
+			 * So we will only try %lld if %ld does not work.
+			 */
+			if (l_format < 0) {
+				/* %ld prints lower 32 bits only, use %lld */
+				fmt = "%s%-36.36s\t%-8llu\t(0x%llx)\n";
+			} else {
+				/* %ld prints all 64 bits, use %ld */
+				fmt = "%s%-36.36s\t%-8lu\t(0x%lx)\n";
+			}
+			printf(fmt,
 			    (conf->tab_ok ? "\t" : ""), p->meaning,
 			    (unsigned long long)p->nmbr,
 			    (unsigned long long)p->nmbr);

custom/custtbl.c

@@ -20,12 +20,12 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  * Comments, suggestions, bug fixes and questions about these routines
- * are welcome.  Send EMail to the address given below.
+ * are welcome.	 Send EMail to the address given below.
  *
  * Happy bit twiddling,
  *
- *      Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	Landon Curt Noll
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */
@@ -37,7 +37,7 @@
 
 /*
  * NOTE: See the file CUSTOM for instructions on how to add
- * 	 custom functions.
+ *	 custom functions.
  */
 
 

custom/devnull

@@ -10,7 +10,7 @@ TYPES
     return	null
 
 DESCRIPTION
-    This custom function does nothing.  It is intented for testing
+    This custom function does nothing.	It is intented for testing
     of the general custom interface.
 
 EXAMPLE

custom/halflen.cal

@@ -10,7 +10,7 @@
  * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
  * PERFORMANCE OF THIS SOFTWARE.
  *
- * chongo was here	/\../\		http://reality.sgi.com/chongo
+ * chongo was here	/\../\		http://reality.sgi.com/chongo/
  */
 /*
  * halflen - determine the length of numeric value in HALFs

custom/pzasusb8

@@ -11,7 +11,7 @@ TYPES
 
 DESCRIPTION
     This custom function prints out the numerator of a real value
-    in octets.  Each HALF value is printed in a separate line.
+    in octets.	Each HALF value is printed in a separate line.
 
     NOTE: The output will vary depending on the size of a HALF
 	  and the byte order of the system.  See:
@@ -26,15 +26,15 @@ DESCRIPTION
 
 EXAMPLE
     > custom("pzasusb8", 0x01020304050607080910111213141516);
-    0:      13141516
-    1:      09101112
-    2:      05060708
-    3:      01020304
+    0:	    13141516
+    1:	    09101112
+    2:	    05060708
+    3:	    01020304
 
     > custom("pzasusb8", 10^25)
-    0:      4a000000
-    1:      16140148
-    2:      00084595
+    0:	    4a000000
+    1:	    16140148
+    2:	    00084595
 
     > printf("%x\n", 10^25);
     0x84595161401484a000000

file.c

@@ -19,7 +19,7 @@
 #include "file.h"
 #include "calcerr.h"
 
-#define	READSIZE	1024	/* buffer size for reading */
+#define READSIZE	1024	/* buffer size for reading */
 
 /*
  * external STDIO functions
@@ -34,7 +34,7 @@ extern FILE *f_open(char *name, char *mode);
  * and cannot be closed.  Their file ids are always 0, 1, and 2.
  */
 static FILEIO files[MAXFILES] = {
-	{FILEID_STDIN,  NULL,  (dev_t)0, (ino_t)0,
+	{FILEID_STDIN,	NULL,  (dev_t)0, (ino_t)0,
 	 "(stdin)",  TRUE, FALSE, 'r', "r"},
 	{FILEID_STDOUT, NULL, (dev_t)0, (ino_t)0,
 	 "(stdout)", FALSE,  TRUE, 'w', "w"},
@@ -43,7 +43,7 @@ static FILEIO files[MAXFILES] = {
 };
 
 
-static int ioindex[MAXFILES] = {0,1,2};	/* Indices for FILEIO table */
+static int ioindex[MAXFILES] = {0,1,2}; /* Indices for FILEIO table */
 static FILEID lastid = FILEID_STDERR;	/* Last allocated file id */
 static int idnum = 3;			/* Number of allocated file ids */
 
@@ -398,7 +398,7 @@ indexid(long index)
 
 
 /*
- * Close the specified file id.  Returns TRUE if there was an error.
+ * Close the specified file id.	 Returns TRUE if there was an error.
  * Closing of stdin, stdout, or stderr is illegal, but closing of already
  * closed files is allowed.
  */
@@ -536,7 +536,7 @@ flushall(void)
  *
  *	bit 0:	at newline
  *	bit 1:	at null character
- *	bit 2:  at white space (also skips leading white space)
+ *	bit 2:	at white space (also skips leading white space)
  *
  * If neither '\n' nor '\0' is encountered reading continues until EOF.
  * If bit 3 is set the stop character is removed.
@@ -725,7 +725,7 @@ printid(FILEID id, int flags)
 
 
 /*
- * Print a formatted string similar to printf.  Various formats of output
+ * Print a formatted string similar to printf.	Various formats of output
  * are possible, depending on the format string AND the actual types of the
  * values.  Mismatches do not cause errors, instead something reasonable is
  * printed instead.  The output goes to the file with the specified id.
@@ -1294,7 +1294,7 @@ getloc(FILEID id, ZVALUE *res)
 	 */
 	fiop = findid(id, 0);
 	if (fiop == NULL) {
-	  	/* file not open */
+		/* file not open */
 		return -1;
 	}
 	fp = fiop->fp;
@@ -1467,7 +1467,7 @@ setloc(FILEID id, ZVALUE zpos)
 	 */
 	fiop = findid(id, 0);
 	if (fiop == NULL) {
-	  	/* file not open */
+		/* file not open */
 		return -1;
 	}
 	fp = fiop->fp;
@@ -1635,7 +1635,7 @@ getsize(FILEID id, ZVALUE *res)
 	 */
 	fiop = findid(id, 0);
 	if (fiop == NULL) {
-	  	/* file not open */
+		/* file not open */
 		return 1;
 	}
 	fp = fiop->fp;
@@ -1671,7 +1671,7 @@ get_device(FILEID id, ZVALUE *dev)
 	 */
 	fiop = findid(id, 0);
 	if (fiop == NULL) {
-	  	/* file not open */
+		/* file not open */
 		return -1;
 	}
 
@@ -1704,7 +1704,7 @@ get_inode(FILEID id, ZVALUE *inode)
 	 */
 	fiop = findid(id, 0);
 	if (fiop == NULL) {
-	  	/* file not open */
+		/* file not open */
 		return -1;
 	}
 
@@ -2144,7 +2144,7 @@ scanfstr(char *str, char *fmt, int count, VALUE **vals)
 
 
 /*
- * Read a number in floating-point format from a file.  The first dot,
+ * Read a number in floating-point format from a file.	The first dot,
  * if any, is considered as the decimal point; later dots are ignored.
  * For example, -23.45..67. is interpreted as -23.4567
  * An optional 'e' or 'E' indicates multiplication by a power or 10,
@@ -2228,15 +2228,16 @@ freadnum(FILE *fp, VALUE *valptr)
 			ch = fgetc(fp);
 		}
 	}
-	if (ch == 'i' || ch == 'I')
+	if (ch == 'i' || ch == 'I') {
 		imag = TRUE;
-	else {
+	} else {
 		ungetc(ch, fp);
 	}
 
 	if (ziszero(num)) {
 		zfree(num);
 		val.v_type = V_NUM;
+		val.v_subtype = V_NOSUBTYPE;
 		val.v_num = qlink(&_qzero_);
 		*valptr = val;
 		return;
@@ -2281,11 +2282,11 @@ freadnum(FILE *fp, VALUE *valptr)
 		c->imag = q;
 		val.v_type = V_COM;
 		val.v_com = c;
-	}
-	else {
+	} else {
 		val.v_type = V_NUM;
 		val.v_num = q;
 	}
+	val.v_subtype = V_NOSUBTYPE;
 	*valptr = val;
 }
 
@@ -2393,7 +2394,7 @@ isattyid(FILEID id)
  *	zero if string found, position stored at res
  *
  * XXX - This search is a translation of the original search that did not
- *	 work with large files.  The search algorithm used is slow and
+ *	 work with large files.	 The search algorithm used is slow and
  *	 should be spead up much more.
  */
 int
@@ -2512,7 +2513,7 @@ fsearch(FILEID id, char *str, ZVALUE start, ZVALUE end, ZVALUE *res)
  *	zero if string found, position stored at res
  *
  * XXX - This search is a translation of the original search that did not
- *	 work with large files.  The search algorithm used is so slow
+ *	 work with large files.	 The search algorithm used is so slow
  *	 as to be painful to the user and needs to be sped up much more.
  */
 int

file.h

@@ -42,7 +42,7 @@ typedef struct {
  * We assume that if your system does not have fgetpos/fsetpos,
  * then it will have a FILEPOS that is a scalar type (e.g., long).
  * Some obscure systems without fgetpos/fsetpos may not have a simple
- * scalar type.  In these cases the f_tell macro below will fail.
+ * scalar type.	 In these cases the f_tell macro below will fail.
  */
 #if defined(HAVE_FPOS)
 
@@ -51,7 +51,7 @@ typedef struct {
 
 #else
 
-#define f_seek_set(stream, loc)  \
+#define f_seek_set(stream, loc)	 \
 	fseek((FILE*)(stream), *(FILEPOS*)(loc), SEEK_SET)
 #define f_tell(stream, loc) (*((FILEPOS*)(loc)) = ftell((FILE*)(stream)))
 

fposval.c

@@ -12,7 +12,7 @@
  *
  * We will #define of 8 symbols:
  *
- *	FILEPOS_BITS 		length in bits of the type FILEPOS
+ *	FILEPOS_BITS		length in bits of the type FILEPOS
  *	SWAP_HALF_IN_FILEPOS	will copy/swap FILEPOS into an HALF array
  *	OFF_T_BITS		length in bits of the st_size stat element
  *	SWAP_HALF_IN_OFF_T	will copy/swap st_size into an HALF array

func.h

@@ -6,7 +6,7 @@
 
 
 #if !defined(__FUNC_H__)
-#define	__FUNC_H__
+#define __FUNC_H__
 
 
 #include "calc.h"

hash.c

@@ -248,14 +248,14 @@ hash_final(HASH *state)
  *
  * given:
  *	type	- hash type (see hash.h)
- *	longval	- a long value
+ *	longval - a long value
  *	state	- the state to hash
  *
  * returns:
- *      the new state
+ *	the new state
  *
  * This function will hash a long value as if it were a 64 bit value.
- * The input is a long.  If a long is smaller than 64 bits, we will
+ * The input is a long.	 If a long is smaller than 64 bits, we will
  * hash a final 32 bits of zeros.
  */
 HASH *

hash.h

@@ -52,8 +52,8 @@
  */
 typedef struct hashstate HASH;
 struct hashstate {
-        int hashtype;		/* XYZ_HASH_TYPE debug value */
-        BOOL bytes;		/* TRUE => reading bytes rather than words */
+	int hashtype;		/* XYZ_HASH_TYPE debug value */
+	BOOL bytes;		/* TRUE => reading bytes rather than words */
 	void (*update)(HASH*, USB8*, USB32);	/* update arbitrary length */
 	void (*chkpt)(HASH*);			/* checkpoint a state */
 	void (*note)(int, HASH*);		/* note a special value */

have_offscl.c

@@ -5,7 +5,7 @@
  *	have_offscl
  *
  * On some systems, off_t is a scalar value on which one can perform
- * arithmetic operations, assignments and comparisons.  On some systems
+ * arithmetic operations, assignments and comparisons.	On some systems
  * off_t is some sort of union or struct which must be converted into
  * a ZVALUE in order to perform arithmetic operations, assignments and
  * comparisons.

have_posscl.c

@@ -5,7 +5,7 @@
  *	have_posscl
  *
  * On some systems, FILEPOS is a scalar value on which one can perform
- * arithmetic operations, assignments and comparisons.  On some systems
+ * arithmetic operations, assignments and comparisons.	On some systems
  * FILEPOS is some sort of union or struct which must be converted into
  * a ZVALUE in order to perform arithmetic operations, assignments and
  * comparisons.
@@ -51,7 +51,7 @@ main(void)
 {
 #if !defined(FILEPOS_NON_SCALAR)
 	FILEPOS value;	/* an FILEPOS to perform arithmatic on */
-	FILEPOS value2;	/* an FILEPOS to perform arithmatic on */
+	FILEPOS value2; /* an FILEPOS to perform arithmatic on */
 
 	/*
 	 * do some math opts on an FILEPOS

have_rusage.c

@@ -0,0 +1,62 @@
+/*
+ * have_rusage - Determine if we getrusage()
+ *
+ * usage:
+ *	have_rusage
+ *
+ * Not all systems have the getrusage() function, so this may not
+ * compile on your system.
+ *
+ * This prog outputs several defines:
+ *
+ *	HAVE_GETRUSAGE
+ *		defined ==> use getrusage()
+ *		undefined ==> do not call or cannot call getrusage()
+ */
+/*
+ * Copyright (c) 1999 by Landon Curt Noll.  All Rights Reserved.
+ *
+ * Permission to use, copy, modify, and distribute this software and
+ * its documentation for any purpose and without fee is hereby granted,
+ * provided that the above copyright, this permission notice and text
+ * this comment, and the disclaimer below appear in all of the following:
+ *
+ *	supporting documentation
+ *	source copies
+ *	source works derived from this source
+ *	binaries derived from this source or from derived source
+ *
+ * LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
+ * EVENT SHALL LANDON CURT NOLL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ *
+ * chongo was here	/\../\
+ */
+
+#include <sys/time.h>
+#include <sys/resource.h>
+
+int
+main(void)
+{
+#if defined(HAVE_NO_GETRUSAGE)
+
+	printf("#undef HAVE_GETRUSAGE /* no */\n");
+
+#else /* HAVE_NO_GETRUSAGE */
+
+	struct rusage rusage;		/* resource utilization */
+
+	(void) getrusage(RUSAGE_SELF, &rusage);
+
+	printf("#define HAVE_GETRUSAGE /* yes */\n");
+
+#endif /* HAVE_NO_GETRUSAGE */
+
+	/* exit(0); */
+	return 0;
+}

have_stdvs.c

@@ -9,7 +9,7 @@
  * as if it were vsprintf() and hope for the best.
  *
  * This program will output #defines and exits 0 if vsprintf() (or sprintf())
- * produces the results that we expect.  This program exits 1 if vsprintf()
+ * produces the results that we expect.	 This program exits 1 if vsprintf()
  * (or sprintf()) produces unexpected results while using the <stdarg.h>
  * include file.
  */
@@ -109,14 +109,14 @@ main(void)
 	puts(" * SIMULATE_STDARG");
 	puts(" *");
 	puts(" * WARNING: This type of stdarg makes assumptions about the stack");
-	puts(" * 	    that may not be true on your system.  You may want to");
+	puts(" *	    that may not be true on your system.  You may want to");
 	puts(" *	    define STDARG (if using ANSI C) or VARARGS.");
 	puts(" */");
 	puts("typedef char *va_list;");
 	puts("#define va_start(ap,parmn) (void)((ap) = (char*)(&(parmn) + 1))");
 	puts("#define va_end(ap) (void)((ap) = 0)");
 	puts("#define va_arg(ap, type) \\");
-	puts("        (((type*)((ap) = ((ap) + sizeof(type))))[-1])");
+	puts("	      (((type*)((ap) = ((ap) + sizeof(type))))[-1])");
 	puts("#define SIMULATE_STDARG /* use std_arg.h to simulate <stdarg.h> */");
 #else
 	puts("#define STDARG /* use <stdarg.h> */");

have_strdup.c

@@ -0,0 +1,62 @@
+/*
+ * have_strdup - Determine if we strdup()
+ *
+ * usage:
+ *	have_strdup
+ *
+ * Not all systems have the strdup() function, so this may not
+ * compile on your system.
+ *
+ * This prog outputs several defines:
+ *
+ *	HAVE_STRDUP
+ *		defined ==> use strdup()
+ *		undefined ==> do not call or cannot call strdup()
+ */
+/*
+ * Copyright (c) 1999 by Landon Curt Noll.  All Rights Reserved.
+ *
+ * Permission to use, copy, modify, and distribute this software and
+ * its documentation for any purpose and without fee is hereby granted,
+ * provided that the above copyright, this permission notice and text
+ * this comment, and the disclaimer below appear in all of the following:
+ *
+ *	supporting documentation
+ *	source copies
+ *	source works derived from this source
+ *	binaries derived from this source or from derived source
+ *
+ * LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
+ * EVENT SHALL LANDON CURT NOLL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ *
+ * chongo was here	/\../\
+ */
+
+#include <string.h>
+
+int
+main(void)
+{
+#if defined(HAVE_NO_STRDUP)
+
+	printf("#undef HAVE_STRDUP /* no */\n");
+
+#else /* HAVE_NO_STRDUP */
+
+	char *p;
+
+	p = strdup("#define HAVE_STRDUP /* yes */");
+	if (p != NULL) {
+		printf("%s\n", p);
+	}
+
+#endif /* HAVE_NO_STRDUP */
+
+	/* exit(0); */
+	return 0;
+}

have_ustat.c

@@ -50,8 +50,8 @@ main(void)
 
 #else /* HAVE_NO_USTAT */
 
-	struct stat stat_dot;           /* stat of "." */
-	struct ustat ustat_dot;         /* usage stat of "." */
+	struct stat stat_dot;		/* stat of "." */
+	struct ustat ustat_dot;		/* usage stat of "." */
 
 	(void) stat(".", &stat_dot);
 	(void) ustat(stat_dot.st_dev, &ustat_dot);

have_varvs.c

@@ -6,7 +6,7 @@
  * and hope for the best.
  *
  * This program will output #defines and exits 0 if vsprintf() (or sprintf())
- * produces the results that we expect.  This program exits 1 if vsprintf()
+ * produces the results that we expect.	 This program exits 1 if vsprintf()
  * (or sprintf()) produces unexpected results while using the <stdarg.h>
  * include file.
  */

help/Makefile

@@ -35,13 +35,12 @@ Q=@
 
 # standard tools
 #
-NATIVE_CC= cc
-NATIVE_CFLAGS=
+LCC= cc
+ICFLAGS=
+ILDFLAGS=
 SED= sed
 SORT= sort
 FMT= fmt
-CMP= cmp
-CAT= cat
 
 # Standard and Builtin help files
 #
@@ -154,7 +153,7 @@ all: ${FULL_HELP_FILES} full ${DETAIL_HELP} ${DETAIL_CLONE} \
 # used by the upper level Makefile to determine of we have done all
 #
 # NOTE: Due to bogus shells found on one common system we must have
-#       an non-emoty else clause for every if condition.  *sigh*
+#	an non-emoty else clause for every if condition.  *sigh*
 #
 .all:
 	rm -f .all
@@ -234,7 +233,7 @@ bugs: ../BUGS
 
 errorcodes: ../calcerr.h errorcodes.hdr errorcodes.sed
 	rm -f $@
-	${CAT} errorcodes.hdr > $@
+	cat errorcodes.hdr > $@
 	${SED} -n -f errorcodes.sed < ../calcerr.h >> $@
 	chmod 0444 $@
 	-@if [ -z "${Q}" ]; then \
@@ -342,7 +341,7 @@ ${SINGULAR_FILES}: ${PLURAL_FILES}
 # Form the builtin file
 #
 # We ave a "chicken-and-egg" problem.  We want the builtn help file to
-# accurately reflect the function list.  It would be nice if we could
+# accurately reflect the function list.	 It would be nice if we could
 # just execute calc show builtin, but calc may not have been built or
 # buildable at this point.  The hack-a-round used is to convert ../func.c
 # into a standalone program that generates a suitable function list
@@ -359,17 +358,13 @@ ${SINGULAR_FILES}: ${PLURAL_FILES}
 #
 builtin: builtin.top builtin.end ../func.c funclist.sed
 	${Q}echo "forming builtin help file"
-	-${Q}rm -f builtin
-	${Q}cat builtin.top > builtin
 	-${Q}rm -f funclist.c
 	${Q}${SED} -n -f funclist.sed ../func.c > funclist.c
-
-	-${Q}rm -f ../funclist.c ../funclist.o ../funclist funclist
-	${Q}cp funclist.c ..
-	-${Q}(cd ..; \
-	 ${NATIVE_CC} ${NATIVE_CFLAGS} -DFUNCLIST funclist.c -o funclist; \
-	 mv funclist help; \
-	 rm -f funclist.c funclist.o funclist)
+	-${Q}rm -f funclist.o funclist
+	${Q}${LCC} ${ICFLAGS} -DFUNCLIST -I/usr/include -I.. funclist.c -c
+	${Q}${LCC} ${ILDFLAGS} funclist.o -o funclist
+	-${Q}rm -f builtin
+	${Q}cat builtin.top > builtin
 	${Q}./funclist | \
 	    ${SED} -e 's/^/	/' -e 's/[	 ][	 ]*$$//' >> builtin
 	${Q}cat builtin.end >> builtin
@@ -384,7 +379,7 @@ builtin: builtin.top builtin.end ../func.c funclist.sed
 
 ##
 #
-# File list generation.  You can ignore this section.
+# File list generation.	 You can ignore this section.
 #
 #
 # We will form the names of source files as if they were in a
@@ -394,15 +389,11 @@ builtin: builtin.top builtin.end ../func.c funclist.sed
 
 distlist: ${DISTLIST}
 	${Q}for i in ${DISTLIST}; do \
-		echo calc/help/$$i; \
+		echo help/$$i; \
 	done | ${SORT}
 
-# The bsdi distribution has generated files as well as distributed files.
-#
-bsdilist: ${DISTLIST} ${BLT_HELP_FILES}
-	${Q}for i in ${DISTLIST} ${BLT_HELP_FILES}; do \
-		echo calc/help/$$i; \
-	done | ${SORT}
+distdir:
+	${Q}echo help
 
 # The BSDI cdrom makefile expects all help files to be pre-built.  This rule
 # creats these fils so that the release can be shipped off to BSDI.  You can

help/acosh

@@ -17,7 +17,7 @@ DESCRIPTION
     acosh(x) is the nonnegative real number v for which cosh(v) = x.
     It is given by
 
-   		 acosh(x) = ln(x + sqrt(x^2 - 1))
+		 acosh(x) = ln(x + sqrt(x^2 - 1))
 
 EXAMPLE
     > print acosh(2, 1e-5), acosh(2, 1e-10), acosh(2, 1e-15), acosh(2, 1e-20)

help/acoth

@@ -16,7 +16,7 @@ DESCRIPTION
 
     acoth(x) is the real number v for which coth(v) = x.
     It is given by
-    		acoth(x) = ln((x + 1)/(x - 1))/2
+		acoth(x) = ln((x + 1)/(x - 1))/2
 
 EXAMPLE
     > print acoth(2, 1e-5), acoth(2, 1e-10), acoth(2, 1e-15), acoth(2, 1e-20)

help/acsch

@@ -16,7 +16,7 @@ DESCRIPTION
 
     acsch(x) is the real number v for which csch(v) = x.  It is given by
 
-    		acsch(x) = ln((1 + sqrt(1 + x^2))/x)
+		acsch(x) = ln((1 + sqrt(1 + x^2))/x)
 
 
 EXAMPLE

help/address

@@ -20,7 +20,7 @@ DESCRIPTION
     otherwise accessing, such a vacated address may be catastrophic.
 
     An octet is normally expressed by B[i] where B is a block and
-    0 <= i < sizeof(B).  &B[i] then returns the address at which this
+    0 <= i < sizeof(B).	 &B[i] then returns the address at which this
     octet is located until the block is freed or relocated.  Freeing
     of an unnamed block B occurs when a new value is assigned to B or
     when B ceases to exist; a named block B is freed by blkfree(B().
@@ -96,7 +96,7 @@ DESCRIPTION
 			> define f(a) = 27 + a;
 
     the three occurrences of 27 have the same address which may be displayed
-    by any of &27, &*x, &*y and &f(0).  If x and y are assigned
+    by any of &27, &*x, &*y and &f(0).	If x and y are assigned
     other values and f is redefined or undefined and the 27 has not been
     stored elsewhere (e.g. as the "old value" or in another function
     definition or as an element in an association), the address assigned at
@@ -105,7 +105,7 @@ DESCRIPTION
 
     When a function returns a number value, that number value is usually
     placed at a newly allocated address, even if an equal number is stored
-    elsewhere.  For example calls to f(a), as defined above, with the same
+    elsewhere.	For example calls to f(a), as defined above, with the same
     non-zero value for a will be assigned to different addresses as can be
     seen from printing &*A, &*B, &*C after
 

help/appr

@@ -84,7 +84,7 @@ DESCRIPTION
 
     Complex x:
 
-	Returns  appr(re(x), y, z) + appr(im(x), y, z) * 1i
+	Returns	 appr(re(x), y, z) + appr(im(x), y, z) * 1i
 
 PROPERTIES
 	If appr(x,y,z) != x, then abs(x - appr(x,y,z)) < abs(y).

help/archive

@@ -11,6 +11,6 @@ Where to get the the latest versions of calc
     for information on how to obtain up a recent version of calc.
 
 Landon Curt Noll
-http://reality.sgi.com/chongo
+http://reality.sgi.com/chongo/
 
 chongo <was here> /\../\

help/asech

@@ -16,7 +16,7 @@ DESCRIPTION
 
     asech(x) is the real number v for which sech(v) = x.  It is given by
 
-    		asech(x) = ln((1 + sqrt(1 - x^2))/x)
+		asech(x) = ln((1 + sqrt(1 - x^2))/x)
 
 EXAMPLE
     > print asech(.5,1e-5), asech(.5,1e-10), asech(.5,1e-15), asech(.5,1e-20)

help/asinh

@@ -16,7 +16,7 @@ DESCRIPTION
 
     asinh(x) is the real number v for which sinh(v) = x.  It is given by
 
-    		asinh(x) = ln(x + sqrt(1 + x^2))
+		asinh(x) = ln(x + sqrt(1 + x^2))
 
 EXAMPLE
     > print asinh(2, 1e-5), asinh(2, 1e-10), asinh(2, 1e-15), asinh(2, 1e-20)

help/assign

@@ -44,7 +44,7 @@ DESCRIPTION
     In simple assignments, = associates from right to left so that, for
     example,
 
-    		a = b = c
+		a = b = c
 
     has the effect of a = (b = c) and results in assigning the value of c
     to both a and b.  The expression (a = b) = c is acceptable, but has the
@@ -66,7 +66,7 @@ DESCRIPTION
     that of A[0] = A[1].
 
     If, in execution of a = b, a is changed by the evaluation of b, the
-    value of b may be stored in an unintended or inaccessible location.  For
+    value of b may be stored in an unintended or inaccessible location.	 For
     example,
 		mat A[2]= {1,2};
 		A[0] = (A = 3);

help/assoc

@@ -14,7 +14,7 @@ DESCRIPTION
     assignments of the forms
 
 	A[a_1] = v_1
-        A[a_1, a_2] = v_2
+	A[a_1, a_2] = v_2
 	A[a_1, a_2, a_3] = v_3
 	A[a_1, a_2, a_3, a_4] = v_4
 
@@ -53,7 +53,7 @@ DESCRIPTION
     a sequential scan through the elements difficult.
 
     The search and rsearch functions can search for an element in an
-    association which has the specified value.  They return the index
+    association which has the specified value.	They return the index
     of the found element, or a NULL value if the value was not found.
 
     Associations can be copied by an assignment, and can be compared

help/base

@@ -18,8 +18,8 @@ DESCRIPTION
 
     The following convention is used to declare modes:
 
-	     base        config
-	    value        string
+	     base	 config
+	    value	 string
 
 	       2	"binary"	binary fractions
 	       8	"octal"		octal fractions

help/bit

@@ -11,7 +11,7 @@ TYPES
     return	int
 
 DESCRIPTION
-    Determine if the binary bit y is set in x.  If:
+    Determine if the binary bit y is set in x.	If:
 
 	     x
 	int(---) mod 2 == 1

help/blk

@@ -26,7 +26,7 @@ DESCRIPTION
     ... , B[len-1], these all initially having zero value.
 
     The octets B[i] for i >= len always have zero value.  If B[i] with
-    some i >= len is referenced, len is increased by 1.  For example:
+    some i >= len is referenced, len is increased by 1.	 For example:
 
 			B[i] = x
 
@@ -70,7 +70,7 @@ DESCRIPTION
     If a block value B created by B = blk(len, chunk) is assigned to
     another variable by C = B, a new block of the same structure as B
     is created to become the value of C, and the octets in B are copied
-    to this new block.  A block with possibly different length or
+    to this new block.	A block with possibly different length or
     chunksize is created by C = blk(B, newlen, newchunk), only the first
     min(len, newlen) octets being copied from B; later octets are
     assigned zero value.  If omitted, newlen and newchunk default to
@@ -120,14 +120,14 @@ DESCRIPTION
     last two avoid printing of the new value for A.
 
     Named blocks are assigned index numbers 0, 1, 2, ..., in the order
-    of their creation.  The block with index id is returned by blocks(id).
+    of their creation.	The block with index id is returned by blocks(id).
     With no argument, blocks() returns the number of current unfreed
     named blocks.  A named block may be used
 
     The memory allocated to a named block is freed by the blkfree()
     function with argument the named block, its name, or its id number.
     The block remains in existence but with a null data pointer,
-    its length and size being reduced to zero.  A new block of memory
+    its length and size being reduced to zero.	A new block of memory
     may be allocated to it, with possibly new length and chunksize by:
 
 			blk(val [, len, chunk])

help/blkcpy

@@ -90,7 +90,7 @@ DESCRIPTION
     so that num can be at most size(B) - ssi.
 
     For copying to a block B (named or unnamed), reallocation will be
-    required if dsi + num > sizeof(B).  (This will not be permitted if
+    required if dsi + num > sizeof(B).	(This will not be permitted if
     protect(B) has bit 4 set.)
 
     For copying from a file stream fs, num can be at most size(fs) - ssi.

help/blkfree

@@ -12,7 +12,7 @@ TYPES
 DESCRIPTION
     If val is a named block, or the name of a named block, or the
     identifying index for a named block, blkfree(val) frees the
-    memory block allocated to this named block.  The block remains
+    memory block allocated to this named block.	 The block remains
     in existence with the same name, identifying index, and chunksize,
     but its size and maxsize becomes zero and the pointer for the start
     of its data block null.
@@ -26,16 +26,16 @@ EXAMPLE
     > B1 = blk("foo")
     > B2 = blk("Second block")
     show blocks
-     id   name
+     id	  name
     ----  -----
-     0   foo
-     1   Second block
+     0	 foo
+     1	 Second block
 
     > blkfree(B1)
     > show blocks
-     id   name
+     id	  name
     ----  -----
-     1   Second block
+     1	 Second block
 
     > B1
 	block 0: foo

help/bround

@@ -12,7 +12,7 @@ TYPES
     Otherwise, if x is an object of type tt, or if x is not an object or
     number but y is an object of type tt, and the function tt_bround has
     to be defined; the types for x, plcs, rnd, and the returned value,
-    if any, are as required for specified in tt_bround.  For the object
+    if any, are as required for specified in tt_bround.	 For the object
     case, plcs and rnd default to the null value.
 
     For other cases:
@@ -31,7 +31,7 @@ DESCRIPTION
     If the number of binary places is n and eps = 10^-n, the
     result is the same as for appr(x, eps, rnd).  This will be
     exactly x if x is a multiple of eps; otherwise rounding occurs
-    to one of the nearest multiples of eps on either side of x.  Which
+    to one of the nearest multiples of eps on either side of x.	 Which
     of these multiples is returned is determined by z = rnd & 31, i.e.
     the five low order bits of rnd, as follows:
 

help/builtin.end

@@ -4,25 +4,25 @@
 	to be set or read.  If only one argument is given, then the current
 	value of the named parameter is returned.  If two arguments are given,
 	then the named parameter is set to the value of the second argument,
-	and the old value of the parameter is returned.  Therefore you can
+	and the old value of the parameter is returned.	 Therefore you can
 	change a parameter and restore its old value later.  The possible
 	parameters are explained in the next section.
 
 	The scale function multiplies or divides a number by a power of 2.
 	This is used for fractional calculations, unlike the << and >>
-	operators, which are only defined for integers.  For example,
+	operators, which are only defined for integers.	 For example,
 	scale(6, -3) is 3/4.
 
 	The quomod function is used to obtain both the quotient and remainder
-	of a division in one operation.  The first two arguments a and b are
+	of a division in one operation.	 The first two arguments a and b are
 	the numbers to be divided.  The last two arguments c and d are two
 	variables which will be assigned the quotient and remainder.  For
 	nonnegative arguments, the results are equivalent to computing a//b
 	and a%b.  If a is negative and the remainder is nonzero, then the
 	quotient will be one less than a//b.  This makes the following three
-	properties always hold:  The quotient c is always an integer.  The
+	properties always hold:	 The quotient c is always an integer.  The
 	remainder d is always 0 <= d < b.  The equation a = b * c + d always
-	holds.  This function returns 0 if there is no remainder, and 1 if
+	holds.	This function returns 0 if there is no remainder, and 1 if
 	there is a remainder.  For examples, quomod(10, 3, x, y) sets x to 3,
 	y to 1, and returns the value 1, and quomod(-4, 3.14159, x, y) sets x
 	to -2, y to 2.28318, and returns the value 1.
@@ -37,8 +37,8 @@
 
 	The digit and bit functions return individual digits of a number,
 	either in base 10 or in base 2, where the lowest digit of a number
-	is at digit position 0.  For example, digit(5678, 3) is 5, and
-	bit(0b1000100, 2) is 1.  Negative digit positions indicate places
+	is at digit position 0.	 For example, digit(5678, 3) is 5, and
+	bit(0b1000100, 2) is 1.	 Negative digit positions indicate places
 	to the right of the decimal or binary point, so that for example,
 	digit(3.456, -1) is 4.
 
@@ -139,11 +139,11 @@
 
 	The functions rcin, rcmul, rcout, rcpow, and rcsq are used to
 	perform modular arithmetic calculations for large odd numbers
-	faster than the usual methods.  To do this, you first use the
+	faster than the usual methods.	To do this, you first use the
 	rcin function to convert all input values into numbers which are
-	in a format called REDC format.  Then you use rcmul, rcsq, and
+	in a format called REDC format.	 Then you use rcmul, rcsq, and
 	rcpow to multiply such numbers together to produce results also
-	in REDC format.  Finally, you use rcout to convert a number in
+	in REDC format.	 Finally, you use rcout to convert a number in
 	REDC format back to a normal number.  The addition, subtraction,
 	negation, and equality comparison between REDC numbers are done
 	using the normal modular methods.  For example, to calculate the
@@ -185,8 +185,8 @@
 
 	The following convention is used to declare modes:
 
-		 base    config
-		value    string
+		 base	 config
+		value	 string
 
 		   2	"binary"	binary fractions
 		   8	"octal"		octal fractions

help/builtin.top

@@ -1,8 +1,8 @@
 Builtin functions
 
-	There is a large number of built-in functions.  Many of the
+	There is a large number of built-in functions.	Many of the
 	functions work on several types of arguments, whereas some only
-	work for the correct types (e.g., numbers or strings).  In the
+	work for the correct types (e.g., numbers or strings).	In the
 	following description, this is indicated by whether or not the
 	description refers to values or numbers.  This display is generated
 	by the 'show builtin' command.

help/calclevel

@@ -2,7 +2,7 @@ NAME
     calclevel - current calculation level
 
 SYNOPSIS
-    calclevel()   
+    calclevel()
 
 TYPES
     return	nonnegative integer
@@ -10,8 +10,8 @@ TYPES
 DESCRIPTION
     This function returns the calculation level at which it is called.
     When a command is being read from a terminal or from a file,
-    calc is at calculation level zero.  The level is increased
-    by 1 each time calculation starts of a user-defined function 
+    calc is at calculation level zero.	The level is increased
+    by 1 each time calculation starts of a user-defined function
     or of eval(S) for some expression S which evaluates to a string.  It
     decreases to zero if an error occurs or a quit or abort statement
     is executed.  Otherwise, it decreases by 1 when the calculation

help/cfappr

@@ -6,7 +6,7 @@ SYNOPSIS
 
 TYPES
     x		real
-    eps 	real with abs(eps) < 1, defaults to epsilon()
+    eps		real with abs(eps) < 1, defaults to epsilon()
     n		real with n >= 1
     rnd		integer, defaults to config("cfappr")
 
@@ -21,7 +21,7 @@ DESCRIPTION
 
     If n >= 1 and den(x) > n, cfappr(x, n) returns the nearest above,
     nearest below, or nearest, approximation to x with denominator less
-    than or equal to n.  If den(x) <= n, cfappr(x,n) returns x.
+    than or equal to n.	 If den(x) <= n, cfappr(x,n) returns x.
 
     In either case when the result v is not x, how v relates to x is
     determined by bits 0, 1, 2 and 4 of the argument rnd in the same way as

help/cfsim

@@ -30,7 +30,7 @@ DESCRIPTION
     This corresponds to the use of rnd for functions like round(x, n, rnd).
 
     If bit 3 or 4 of rnd is set, the lower order bits are ignored; bit 3
-    is ignored if bit 4 is set.  Thusi, for rnd > 3, it sufficient to
+    is ignored if bit 4 is set.	 Thusi, for rnd > 3, it sufficient to
     consider the two cases rnd = 8 and rnd = 16.
 
     If den(x) > 2, cfsim(x, 8) returns the value of the penultimate simple
@@ -55,7 +55,7 @@ DESCRIPTION
 
 	rnd		integer x	half-integer x		den(x) > 2
 
-         8 		0		x - sgn(x)/2		approximant
+	 8		0		x - sgn(x)/2		approximant
 	16		x - sgn(x)	x + sgn(x)/2		nearest
 
      From either cfsim(x, 0) and cfsim(x, 1), the other is easily
@@ -72,7 +72,7 @@ DESCRIPTION
      Iteration of cfsim(x,8) until an integer is obtained gives a sequence of
      "good" approximations to x with decreasing denominators and
      correspondingly decreasing accuracy; each denominator is less than half
-     the preceding denominator.  (Unlike the "forward" sequence of
+     the preceding denominator.	 (Unlike the "forward" sequence of
      continued-fraction approximants these are not necessarily alternately
      greater than and less than x.)
 

help/cmp

@@ -17,7 +17,7 @@ TYPES
 
     return	if x and y are both real: -1, 0, or 1
 		if x and y are both numbers but not both real:
-    			-1, 0, 1, -1+1i, 1i, 1+1i, -1-1i, -1i, or 1-1i
+			-1, 0, 1, -1+1i, 1i, 1+1i, -1-1i, -1i, or 1-1i
 		if x and y are both strings: -1, 0, or 1
 		all other cases: the null value
 
@@ -47,7 +47,7 @@ DESCRIPTION
 		obj point {x,y};
 
 	if points with real components are to be partially ordered by their
-        euclidean distance from the origin, an appropriate point_rel
+	euclidean distance from the origin, an appropriate point_rel
 	function may be that given by
 
 		define point_rel(a,b) = sgn(a.x^2 + a.y^2 - b.x^2 - b.y^2);

help/command

@@ -3,7 +3,7 @@ Command sequence
     This is a sequence of any the following command formats, where
     each command is terminated by a semicolon or newline.  Long command
     lines can be extended by using a back-slash followed by a newline
-    character.  When this is done, the prompt shows a double angle
+    character.	When this is done, the prompt shows a double angle
     bracket to indicate that the line is still in progress.  Certain
     cases will automatically prompt for more input in a similar manner,
     even without the back-slash.  The most common case for this is when
@@ -25,7 +25,7 @@ Command sequence
 	    The second form defines a simple function which calculates
 	    the specified expression value from the specified parameters.
 	    The expression cannot be a statement.  However, the comma
-	    and question mark operators can be useful.  Examples of
+	    and question mark operators can be useful.	Examples of
 	    simple functions are:
 
 		    define sumcubes(a, b) = a^3 + b^3
@@ -45,7 +45,7 @@ Command sequence
     read filename
     read -once filename
 	    This reads definitions from the specified filename.
-	    The name can be quoted if desired.  The calculator
+	    The name can be quoted if desired.	The calculator
 	    uses the CALCPATH environment variable to search
 	    through the specified directories for the filename,
 	    similarly to the use of the PATH environment variable.
@@ -54,7 +54,7 @@ Command sequence
 	    directory followed by a general calc library directory).
 	    The ".cal" extension is defaulted for input files, so
 	    that if "filename" is not found, then "filename.cal" is
-	    then searched for.  The contents of the filename are
+	    then searched for.	The contents of the filename are
 	    command sequences which can consist of expressions to
 	    evaluate or functions to define, just like at the top
 	    level command level.
@@ -82,7 +82,7 @@ Command sequence
 	    later read in order to recreate the variable values.
 	    For speed reasons, values are written as hex fractions.
 	    This command currently only saves simple types, so that
-	    matrices, lists, and objects are not saved.  Function
+	    matrices, lists, and objects are not saved.	 Function
 	    definitions are also not saved.
 
 	    If the -m mode disallows opening of files for writing,
@@ -247,7 +247,7 @@ Command sequence
 	>		<==== calc interactive prompt
 
     because the '-i' calc causes ABORT to drop into an
-    interactive prompt.  However typing a QUIT or ABORT
+    interactive prompt.	 However typing a QUIT or ABORT
     at the interactive prompt level will always calc to exit,
     even when calc is invoked with '-i'.
 
@@ -304,5 +304,5 @@ Command sequence
 
     Also see the help topic:
 
-	    statement       flow control and declaration statements
+	    statement	    flow control and declaration statements
 	    usage	    how to invoke the calc command and calc -options

help/config

@@ -1,10 +1,10 @@
 Configuration parameters
 
     Configuration parameters affect how the calculator performs certain
-    operations.  Among features that are controlled by these parameters
+    operations.	 Among features that are controlled by these parameters
     are the accuracy of some calculations, the displayed format of results,
     the choice from possible alternative algorithms, and whether or not
-    debugging information is displayed.  The parameters are
+    debugging information is displayed.	 The parameters are
     read or set using the "config" built-in function; they remain in effect
     until their values are changed by a config or equivalent instruction.
     The following parameters can be specified:
@@ -65,7 +65,7 @@ Configuration parameters
     It allows functions to control their configuration without impacting
     the calling function.
 
-    There are two configuration state aliases that may be set.  To
+    There are two configuration state aliases that may be set.	To
     set the backward compatible standard configuration:
 
 	    config("all", "oldstd")
@@ -105,7 +105,7 @@ Configuration parameters
     the decimal point to be printed in real or exponential mode in
     normal unformatted printing (print, strprint, fprint) or in
     formatted printing (printf, strprintf, fprintf) when precision is not
-    specified.  The initial value for oldstd is 20, for newstd 10.
+    specified.	The initial value for oldstd is 20, for newstd 10.
     The parameter may be changed to the value d by either
     config("display", d) or by display (d).  This parameter does not change
     the stored value of a number.  Where rounding is necessary to
@@ -116,7 +116,7 @@ Configuration parameters
     calculation of functions for which exact values are not possible or
     not desired.  For most functions, the
 
-	 	remainder = exact value - calculated value
+		remainder = exact value - calculated value
 
     has absolute value less than epsilon, but, except when the sign of
     the remainder is controlled by an appropriate parameter, the
@@ -133,7 +133,7 @@ Configuration parameters
     The "mode" parameter is a string specifying the mode for printing of
     numbers by the unformatted print functions, and the default
     ("%d" specifier) for formatted print functions.  The initial mode
-    is "real".  The available modes are:
+    is "real".	The available modes are:
 
 	    "frac"		decimal fractions
 	    "int"		decimal integer
@@ -152,10 +152,10 @@ Configuration parameters
     runs in a time of O(N^2).  The second method is a recursive and
     complicated method which runs in a time of O(N^1.585).  The argument
     for these parameters is the number of binary words at which the
-    second algorithm begins to be used.  The minimum value is 2, and
+    second algorithm begins to be used.	 The minimum value is 2, and
     the maximum value is very large.  If 2 is used, then the recursive
     algorithm is used all the way down to single digits, which becomes
-    slow since the recursion overhead is high.  If a number such as
+    slow since the recursion overhead is high.	If a number such as
     1000000 is used, then the recursive algorithm is never used, causing
     calculations for large numbers to slow down.  For a typical example
     on a 386, the two algorithms are about equal in speed for a value
@@ -174,9 +174,9 @@ Configuration parameters
     Redc2 specifies the sizes of numbers at which calc switches from
     its first to its second algorithm when using the REDC algorithm.
     The first algorithm performs a multiply and a modular reduction
-    together in one loop which runs in O(N^2).  The second algorithm
+    together in one loop which runs in O(N^2).	The second algorithm
     does the REDC calculation using three multiplies, and runs in
-    O(N^1.585).  The argument for redc2 is the size of the modulus at
+    O(N^1.585).	 The argument for redc2 is the size of the modulus at
     which the second algorithm begins to be used.
 
     Config("tilde") controls whether or not a leading tilde ('~') is
@@ -185,7 +185,7 @@ Configuration parameters
     specified maximum number.  The initial "tilde" value is 1.
 
     Config ("tab") controls the printing of a tab before results
-    automatically displayed when working interactively.  It does not
+    automatically displayed when working interactively.	 It does not
     affect the printing by the functions print, printf, etc.  The initial
     "tab" value is 1.
 
@@ -271,7 +271,7 @@ Configuration parameters
     The default is to print only the first 256 octets.
 
     The "blkverbose" determines if all lines, including duplicates
-    should be printed.  If TRUE, then all lines are printed.  If false,
+    should be printed.	If TRUE, then all lines are printed.  If false,
     duplicate lines are skipped and only a "*" is printed in a style
     similar to od.  This config value has not meaning if "blkfmt" is "str".
 
@@ -319,7 +319,7 @@ Configuration parameters
 
     The "calc_debug" is intended for controlling internal calc routines
     that test its operation, or collect or display information that
-    might be useful for debug purposes.  Much of the output from these
+    might be useful for debug purposes.	 Much of the output from these
     will make sense only to calc wizards.   Zero value (the default for
     both oldstd and newstd) of config("lib_calc") corresponds to switching
     off all these routines.  For nonzero value, particular bits
@@ -401,16 +401,16 @@ Configuration parameters
 
     The following are synonyms for true:
 
-	"on"   "yes"   "y"   "true"   "t"   "1"   any non-zero number
+	"on"   "yes"   "y"   "true"   "t"   "1"	  any non-zero number
 
     The following are synonyms for false:
 
-	"off"  "no"    "n"   "false"  "f"   "0"   the number zero (0)
+	"off"  "no"    "n"   "false"  "f"   "0"	  the number zero (0)
 
     Examples of setting some parameters are:
 
 	    config("mode", "exp");	    exponential output
 	    config("display", 50);	    50 digits of output
 	    epsilon(epsilon() / 8);	    3 bits more accuracy
-	    config("tilde", 0)	    	    disable roundoff tilde printing
+	    config("tilde", 0)		    disable roundoff tilde printing
 	    config("tab", "off")	    disable leading tab printing

help/contrib

@@ -36,17 +36,33 @@ gziped (or compressed) tar file).
 
 You should send submissions to:
 
-	calc-tester@postofc.corp.sgi.com
+    calc-tester at postofc dot corp dot sgi dot com
 
-Thanks for considering submitting code to calc.  Calc is a collective
+    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+
+Thanks for considering submitting code to calc.	 Calc is a collective
 work by a number of people.  It would not be what it is today without
 your efforts and submissions!
 
+Calc bug reports, however, should be sent to:
+
+    calc-bugs at postofc dot corp dot sgi dot com
+
+    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+
+See the BUGS file or try the help command:
+
+    help bugs
+
+for details on bug reporting.
+
 =-=
 
 One may join the calc testing group by sending a request to:
 
-	calc-tester-request@postofc.corp.sgi.com
+	calc-tester-request at postofc dot corp dot sgi dot com
+
+	[[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
 
     Your message body (not the subject) should consist of:
 
@@ -58,6 +74,6 @@ One may join the calc testing group by sending a request to:
     is your full name.
 
 Landon Curt Noll
-http://reality.sgi.com/chongo
+http://reality.sgi.com/chongo/
 
 chongo <was here> /\../\

help/credit

@@ -2,7 +2,11 @@ Credits
 
     The majority of calc was written by David I. Bell.
 
-    Calc archives and calc-tester mailing list maintained by Landon Curt Noll.
+    The Calc primary mirror, calc mailing list and calc bug report
+    processing is performed by Landon Curt Noll.
+
+    Landon Curt Noll maintains the master reference source, performs
+    release control functions as well as other calc maintenance functions.
 
     Thanks for suggestions and encouragement from Peter Miller,
     Neil Justusson, and Landon Noll.
@@ -11,7 +15,7 @@ Credits
     hist.c which is used to do the command line editing.
 
     Thanks to Ernest W. Bowen for supplying many improvements in
-    accuracy and generality for some numeric functions.  Much of
+    accuracy and generality for some numeric functions.	 Much of
     this was in terms of actual code which I gratefully accepted.
     Ernest also supplied the original text for many of the help files.
 

help/custom

@@ -28,7 +28,7 @@ DESCRIPTION
 		calc -C
 
     In other words, explicit action must be taken in order to
-    enable the use of custom functions.  By default (no -C arg)
+    enable the use of custom functions.	 By default (no -C arg)
     custom functions are compiled in but disabled so that only
     portable calc scripts may be used.
 
@@ -36,7 +36,7 @@ DESCRIPTION
     multi-precision calculations in a C-like environment.  You should
     consider implementing algorithms in the calc language as a first
     choice.  Sometimes an algorithm requires use of special hardware, a
-    non-portable OS or pre-compiled C library.  In these cases a custom
+    non-portable OS or pre-compiled C library.	In these cases a custom
     interface may be needed.
 
     The custom function interface is intended to make is easy for

help/define

@@ -9,7 +9,7 @@ Function definitions
     by a return statement, and the function definition is ended with a
     right brace.
 
-    There are some subtle differences, however.  The types of parameters
+    There are some subtle differences, however.	 The types of parameters
     and variables are not defined at compile time, and may vary during
     execution and be different in different calls to the function.  For
     example, a two-argument function add may be defined by

help/den

@@ -11,7 +11,7 @@ TYPES
 
 DESCRIPTION
     For real x, den(x) returns the denominator of x when x is expressed
-    in lowest terms with positive denominator.  In calc,
+    in lowest terms with positive denominator.	In calc,
     real values are actually rational values.  Each calc real
     value can be uniquely expressed as:
 

help/environment

@@ -14,7 +14,7 @@ Environment variables
 
 		    /usr/local/lib/calc
 
-	This value is used by the READ command.  It is an error
+	This value is used by the READ command.	 It is an error
 	if no such readable file is found.
 
 	The CALCBINDINGS file searches the CALCPATH as well.
@@ -58,6 +58,10 @@ Environment variables
 	a terminal, then calc will still run, but fancy command line
 	editing is disabled.
 
+	NOTE: If calc was compiled with GNU-readline support, the
+	      CALCBINDINGS facility is ignored and the standard
+	      readline mechanisms (see readline(3)) are used.
+
     HOME
 
 	This value is taken to be the home directory of the

help/errorcodes.sed

@@ -1 +1 @@
-/^#define E_[^_].*[	 ][1-9][0-9]*[	 ]\/\* .* \*\//s/#define E_.*[ 	]\([1-9][0-9]*\)[	 ]*\/\* \(.*\)[	 ][	 ]*\*\//    \1	\2/p
+/^#define E_[^_].*[	 ][1-9][0-9]*[	 ]\/\* .* \*\//s/#define E_.*[	]\([1-9][0-9]*\)[	 ]*\/\* \(.*\)[	 ][	 ]*\*\//    \1	\2/p

help/eval

@@ -11,7 +11,7 @@ TYPES
 
 DESCRIPTION
    For eval(str), the value of str is to be a string that could be the body
-   of the definition of a function f().  This string may declare local
+   of the definition of a function f().	 This string may declare local
    variables and include keywords (while, for, ...) other than the
    reserved keywords (define, show, help, read, write, show, cd) intended
    for interactive use or for reading from a file.

help/exp

@@ -1,5 +1,5 @@
 NAME
-    exp	- exponential function
+    exp - exponential function
 
 SYNOPSIS
     exp(x [,eps])

help/factor

@@ -14,7 +14,7 @@ TYPES
 DESCRIPTION
 
     If n >= 0 and n has a prime factor less than or equal to limit,
-    factor(n, limit) returns the smallest such factor.  If n >= 0
+    factor(n, limit) returns the smallest such factor.	If n >= 0
     and the smallest prime factor of n exceeds limit, 1 is returned.
     In particular, if n >= 0 and limit <= 1, factor(n, limit)
     always returns 1; factor(n,2) returns 2 if and only if n is even.

help/fclose

@@ -13,7 +13,7 @@ DESCRIPTION
     This function closes the open file associated with the descriptor fd.
     When this is done, the file value associated with the file remains
     a file value, but appears 'closed', and cannot be used in further
-    file-related calls (except fclose) without causing errors.  This same
+    file-related calls (except fclose) without causing errors.	This same
     action occurs to all copies of the file value.  You do not need to
     explicitly close all the copies of a file value.
 
@@ -26,7 +26,7 @@ DESCRIPTION
     there had been an error using the file, or the null value if
     there was no error.
 
-    Closing a closed file is permitted.  Fclose returns null in
+    Closing a closed file is permitted.	 Fclose returns null in
     this case.
 
 EXAMPLE

help/feof

@@ -14,7 +14,7 @@ DESCRIPTION
     is set or clear.
 
     The end-of-file flag for the stream fd is set if reading at the
-    end-of-file position is attempted.  The flag is cleared by
+    end-of-file position is attempted.	The flag is cleared by
     positioning operations (fseek, rewind, fsetpos) and by freopen.
 
 EXAMPLE
@@ -23,14 +23,14 @@ EXAMPLE
     > fflush(fd1)
     > fd2 = fopen("/tmp/newfile", "r")
     > feof(fd2)
-            0
+	    0
     > fgetline(fd2)
 	    "Chongo was here"
     > feof(fd2)
-            0
+	    0
     > fgetline(fd2)
     > feof(fd2)
-            1
+	    1
 
 LIMITS
     none

help/ferror

@@ -20,7 +20,7 @@ DESCRIPTION
 EXAMPLE
     > fd = fopen("/etc/motd", "r")
     > ferror(fd)
-            0
+	    0
 
 LIMITS
     fd must be associaed with an open file

help/fgetc

@@ -14,7 +14,7 @@ DESCRIPTION
     associated with fd.
 
     If there is a next character, this function returns a 1
-    character string containing that character.  In the case
+    character string containing that character.	 In the case
     of EOF or error, nil is returned.
 
 EXAMPLE

help/fgetfield

@@ -16,7 +16,7 @@ DESCRIPTION
     characters are skipped.  If the reading reaches end-of-file, the
     null value is returned.  If non-whitespace is encountered, formation
     of a string begins, continuing until whitespace of '\0' or end-of-file
-    is reached.  The returned value is this string (terminated as usual
+    is reached.	 The returned value is this string (terminated as usual
     by a null character).  After the operation, the file position will
     be immediately after the first whitespace character of '\0' or at
     end-of-file.

help/fgetline

@@ -14,7 +14,7 @@ DESCRIPTION
     the open file associated with fd.  Unlike fgets, the trailing
     newline is removed from the return string.
 
-    Empty lines return the null string.  When the end of file is reached,
+    Empty lines return the null string.	 When the end of file is reached,
     fgetline returns the null value.  (Note the distinction between a null
     string and a null value.)
 

help/file

@@ -6,7 +6,7 @@ Using files
     Some differences do occur, as will be explained here.
 
     Names of files are subject to ~ expansion just like the C or
-    Korn shell.  For example, the file name:
+    Korn shell.	 For example, the file name:
 
 	    ~/.rc.cal
 
@@ -19,8 +19,8 @@ Using files
 
     A file can be opened for either reading, writing, or appending.
     To do this, the 'fopen' function is used, which accepts a filename
-    and an open mode, both as strings.  You use 'r' for reading, 'w'
-    for writing, and 'a' for appending.  For example, to open the file
+    and an open mode, both as strings.	You use 'r' for reading, 'w'
+    for writing, and 'a' for appending.	 For example, to open the file
     'foo' for reading, the following could be used:
 
 	    fd = fopen('foo', 'r');
@@ -53,7 +53,7 @@ Using files
     The 'fclose' function is used to close a file which had been opened.
     When this is done, the file value associated with the file remains
     a file value, but appears 'closed', and cannot be used in further
-    file-related calls (except fclose) without causing errors.  This same
+    file-related calls (except fclose) without causing errors.	This same
     action occurs to all copies of the file value.  You do not need to
     explicitly close all the copies of a file value.  The 'fclose'
     function returns the numeric value of errno if there had been an
@@ -67,7 +67,7 @@ Using files
 		print "error #" : badfile : ":", errno(badfile);
 	    }
 
-    File values can be printed.  When this is done, the filename of the
+    File values can be printed.	 When this is done, the filename of the
     opened file is printed inside of quote marks.  If the file value had
     been closed, then the null string is printed.  If a file value is the
     result of a top-level expression, then in addition to the filename,
@@ -75,7 +75,7 @@ Using files
     status is also displayed.
 
     File values can be used inside of 'if' tests.  When this is done,
-    an opened file is TRUE, and a closed file is FALSE.  As an example
+    an opened file is TRUE, and a closed file is FALSE.	 As an example
     of this, the following loop will print the names of all the currently
     opened non-standard files with their indexes, and then close them:
 
@@ -89,9 +89,9 @@ Using files
     The functions to read from files are 'fgetline' and 'fgetc'.
     The 'fgetline' function accepts a file value, and returns the next
     input line from a file.  The line is returned as a string value, and
-    does not contain the end of line character.  Empty lines return the
+    does not contain the end of line character.	 Empty lines return the
     null string.  When the end of file is reached, fgetline returns the
-    null value.  (Note the distinction between a null string and a null
+    null value.	 (Note the distinction between a null string and a null
     value.)  If the line contained a numeric value, then the 'eval'
     function can then be used to convert the string to a numeric value.
     Care should be used when doing this, however, since eval will
@@ -103,7 +103,7 @@ Using files
     The 'printf' and 'fprintf' functions are used to print results to a
     file (which could be stdout or stderr).  The 'fprintf' function
     accepts a file variable, whereas the 'printf' function assumes the
-    use of 'files(1)' (stdout).  They both require a format string, which
+    use of 'files(1)' (stdout).	 They both require a format string, which
     is used in almost the same way as in normal C.  The differences come
     in the interpretation of values to be printed for various formats.
     Unlike in C, where an unmatched format type and value will cause

help/files

@@ -25,7 +25,7 @@ DESCRIPTION
     files are already open by the calculator and cannot be closed.
 
     When calc starts up, it scans for open file descriptors above
-    stderr (2) and below MAXFILES (20).  Any open descriptor found
+    stderr (2) and below MAXFILES (20).	 Any open descriptor found
     is assumed to be an open file opened in an unknown mode.  Calc
     will try to read and write to this file when directed.
 

help/fopen

@@ -20,7 +20,7 @@ DESCRIPTION
 	"a"	appending
 
     Names of files are subject to ~ expansion just like the C or
-    Korn shell.  For example, the file name:
+    Korn shell.	 For example, the file name:
 
 	~/lib/gleet