Release calc version 2.11.0t7.2

BUGS

@@ -1,8 +1,8 @@
 If you notice something wrong, strange or broken, try rereading:
 
    README.FIRST
-   README
-   BUGS (in particular the bottom problems or mis-features section)
+   HOWTO.INSTALL
+   BUGS (this file)
 
 If that does not help, cd to the calc source directory and try:
 
@@ -18,13 +18,13 @@ If it does not, then something is really broken!
 If you made and modifications to calc beyond the simple Makefile
 configuration, try backing them out and see if things get better.
 
-Check to see if the version of calc you are using is current.  Calc
-distributions may be obtained from the official calc repository:
+To be sure that your version of calc is up to date, check out:
 
-    ftp://ftp.uu.net/pub/calc
+	http://reality.sgi.com/chongo/calc/calc-download.html
 
-If you are an alpha or beta tester, you may have a special pre-released
-version that is more advanced than what is in the ftp archive.
+The calc web site is located at:
+
+	http://reality.sgi.com/chongo/calc
 
 =-=
 
@@ -46,6 +46,8 @@ When you send your report, please include the following information:
 
     * the type of compiler you were using
 
+    * any compiler warnings or erros that you saw
+
     * cd to the calc source directory, and type:
 
 	make debug > debug.out 2>&1		(sh, ksh, bash users)
@@ -57,22 +59,8 @@ Stack traces from core dumps are useful to send as well.
 
 =-=
 
-The official calc repository is located in:
-
-    ftp://ftp.uu.net/pub/calc
-
-If you don't have ftp access to that site, or if your version is more
-recent than what has been released to the ftp archive, you may, as a
-last resort, send EMail to:
-
-    chongo@toad.com
-
-Indicate the version you have and that you would like a more up to date version.
-
-=-=
-
-Send any comments, suggestions and most importantly, fixes (in the form
-of a context diff patch) to:
+Send any comments, compiler warning messages, suggestions and most
+importantly, fixes (in the form of a context diff patch) to:
 
     calc-tester@postofc.corp.sgi.com
 

CHANGES

@@ -1,4 +1,324 @@
-Following is the change from calc version 2.10.3t5.38 to date:
+Following is the change from calc version 2.11.0t7 to date:
+
+    Calc has some new command line flags / command line meaning:
+    (Thanks goes to Ernest Bowen <ernie@turing.une.edu.au>)
+
+	-i 	Go into interactive mode if possible.
+
+	-c	Continue reading command lines even after an execution
+		error has caused the abandonment of a line
+
+	To understand the -i and -c effects, consider the following
+	file (call it myfile.cal) which has deliberate errors in it:
+
+	    print 1;
+	    mat A[1] = {2,3};
+	    print 2;
+	    epsilon(-1);
+	    print 3;
+
+	calc read myfile
+
+	    Reports an error on the 2nd line and exits; prints 1 only.
+
+	calc -c read myfile
+
+	    Report errors on the 2nd and 4th lines and exits; prints 1,2 and 3.
+
+	calc -i read myfile
+
+	    Report errors on the 2nd and gives you a prompt; prints 1 only.
+
+	calc -i -c read myfile
+
+	    Report errors on the 2nd and 4th and gives you a prompt;
+	    prints 1, 2 and 3.
+
+	cat myfile | calc
+
+	    Reports an error on the 2nd line and exits; prints 1 only.
+
+	cat myfile | calc -c
+
+	    Report errors on the 2nd and 4th lines and exits; prints 1,2 and 3.
+
+	Note that continuation refers to command lines, not to statements.  So:
+
+	    calc -c 'print "start"; mat A[1] = {2,3}; print "end";'
+
+	since it contains no newline, the whole string is compiled,
+	but execution is abandoned when the error is encountered and
+	the string ``end'' is not printed.
+
+	You can use your shell to supply newlines in your command line
+	arguments.  For example in sh, ksh, bash:
+
+	    calc -c 'print "start";
+	    mat A[1] = {2,3};
+	    print "end";'
+
+	will print both ``start'' and ``end''.  C-shell users can do:
+
+	    calc -c 'print "start"; \
+	    mat A[1] = {2,3}; \
+	    print "end";'
+
+	however sh, ksh, bash will not see ``end'' printed because their
+	shell will remove the internal newlines.
+
+    Added display(n) builtin which does almost the same as config("display",n)
+    except that rather than causing an execution with an out-of-range or
+    bad-type argument type, it simply writes a message to stderr.  This
+    also now happens to the errmax() builtin.
+
+    Added qtime.cal to the standard calc library.
+
+    Added another command line flag to calc:
+
+	-d 	Disable display of the opening title and config("lib_debug",0)
+
+	The command:
+
+	    calc 'read qtime; qtime(2)'
+
+	will output something like:
+
+	    qtime(utc_hr_offset) defined
+	    It's nearly ten past six.
+
+	whereas:
+
+	    calc -d 'read qtime; qtime(2)'
+
+	will just say:
+
+	    It's nearly ten past six.
+
+    A call of errmax(-1) will prevent errcount from aborting calc.
+
+    Add the function stoponerror(n) which, as the name implies, controls
+    if calc stop on an error based on the value of n:
+
+	n > 0	stop on error even if -c was given on the command line
+	n == 0	if -c, continue, without -c, stop
+	n < 0	continue on error, even if -c was given on the command line
+
+    Calc compilation now stops at the first scanerror.
+
+    Restored the feature where -p disables the printing of leading tabs
+    as of config("tab",0) had been executed.  So using calc in a pipe:
+
+	calc -p 2+17 | whey
+
+     will write '19' instead of '\t17' to the whey command.
+
+     Updated calc man page and help/usage file to reflect recent
+     command line changes.
+
+     Converted start_done into a general calc run state enum called
+     run_state within the calc source.
+
+     Misc calc man page fixes.
+
+
+Following is the change from calc version 2.11.0t1 to 2.11.0t6.3:
+
+    Removed the makefile symbol MAIN.  Now forcing all functions to correctly
+    be declared main.  To satisfy some old broken compilers, a return 0;
+    (instead of an exit(0);) is used at the end of main().
+
+    A few of files that were added to calc used 4 character indentation
+    whereas most of calc uses 8 character indentation.  These imported
+    sources have been changed to conform better with the calc style.
+
+    Added the program calc_errno.c and the Makefile symbol ERRNO_DECL.
+    If ERRNO_DECL is empty, calc_errno.c will try various ways to
+    declare errno, sys_errlist and sys_nerr.  On success or when
+    it gives up, calc_errno will output the middle of the calc_errno.h
+    header file.  If ERRNO_DECL is  -DERRNO_NO_DECL, or -DERRNO_STD_DECL
+    or -DERRNO_OLD_DECL then the Makefile will build the middle
+    of the calc_errno.h header file without calc_errno.c's help.
+
+    The func.c file now includes the constructed header file calc_errno.h
+    to ensure that errno, sys_errlist and sys_nerr are declared correctly.
+
+    Changed check.awk to be more 'old awk' friendly.
+
+    Made some of the source a little more ++ friendly.  We are NOT
+    porting calc to C++!  We will NOT support C++ compilation of calc.
+    Calc will written ANSI C.  We just compiled with a suggestion from
+    Love-Jensen, John <jlove-jensen@globalmt.com> to make calc's version
+    of C a little more to C++ compilers.  We are simply avoiding symbols
+    such as new or try for example.
+
+    Renamed README to README.OLD.  Renamed README.FIRST to README.
+    Updated README, lib/README and BUGS to reflect new URLs and addresses.
+
+    Added a HOWTO.INSTALL file.
+
+    Reordered cc Makefile variable sets in the main Makefile.
+
+    Fixed a bug in hnrmod() and applied a fix that was reported by Ernest
+    Bowen <ernie@turing.une.edu.au>.  Added regression tests 1103 to
+    1112 to confirm the fix.
+
+    Fixed a bug in version.c related to MINOR_PATCHs in both the
+    empty and non-empty MINOR_PATCH cases.
+
+    Fixed malloc and bad storage issues reported by Michel van der List
+    <vanderlistmj@sbphrd.com>.
+
+    Fixed some problems related to path processing while opening files.
+    Under extreme cases, an excessively long filename or CALCPATH value
+    could create problems.  Placed guards in opensearchfile() function
+    in input.c to catch these cases.
+
+    Fixed cases were malloc failures were silently ignored in input.c.
+
+    Eliminated the PATHSIZE limit and the PATHSIZE symbol.
+
+    Added MAX_CALCRC to limit the length of the $CALCRC environment
+    variable to 1024 chars.
+
+    Fixed the magic number relating to the initial number of constants
+    declared by initconstants().  It is now related to the length
+    of the initnumbs[] NUMBER array.
+
+    Added a 'Dec Alpha / Compaq Tru64 cc (non-gnu) compiler set'
+    section to the main Makefile.
+
+    Fixed a string handling bug discovered by Dr.D.J.Picton
+    <dave@aps5.ph.bham.ac.uk> in the custom demo code.
+
+    Fixed a bug in the hnrmod() builtin that was discovered by
+    Ernest Bowen <ernie@neumann.une.edu.au>.
+
+    Added FORCE_STDC symbol.  When defined it will force __STDC__ like
+    conditions.  Thus for compilers with as the Solaris cc compiler
+    that are ANSI-like but still define __STDC__ as 0, one can use
+    -DFORCE_STDC and make use of ANSI-like features.
+
+    Removed the CCSHS symbol from the Makefile.  The shs.c and shs1.c
+    files are now compiled with full ${CFLAGS}.
+
+    The custom.c file is now compiled with full ${CFLAGS}.
+
+    Rewrote command line / argument processing code.  Calc is now
+    using getopt(3) argument processing.
+
+    Fixed a memory leak related to converting strings to numbers
+    in the str2q() function in qio.c.
+
+    Fixed a problem with reading uninitialized memory in the
+    v_subtype of a VALUE in the copyvalue() function in value.c.
+
+    Fixed problems in func.c where temporary VALUEs were not
+    having their v_type elements initialized.
+
+    Fixed a memory leak in qpi() in qtrans.c.
+
+    Fixed a memory leak in math_getdivertedio() in zio.c.
+
+    Fixed a problem with points going beyond the end of allocated
+    memory in addstring() in string.c.
+
+    Fixed a memory leak in zgcdrem(), f_putenv(), zlog() and
+    zlog10() in zfunc.c.
+
+    Fixed a memory leak in zdiv() and zshift() in zmath.c.
+
+    Fixed memory leaks in zsrand() in zrand.c.
+
+    Fixed a memory leak in zsrandom1() in zrandom.c.  Fixed memory
+    leaks associated with replacing the internal random state with
+    another random state.
+
+    Added seed() builtin to return a 64 bit seed for a
+    pseudo-random generator.
+
+    Added functionality from Ernest Bowen <ernie@turing.une.edu.au> to
+    permit nested "= {...}" assignments for lists as well as matrices
+    and objects.  Now one can have a list, matrix or object, some of
+    whose elements are lists, matrices or objects, to any depth of
+    recursion, and assign values to any number of particular elements
+    by an appropriate "initialization" expression.  For example:
+
+	A = mat[2] = {list(1,2), list(3,4,list(5,6))};
+
+    and then assign values to the 6 number elements by:
+
+	A = {{7,8}, {9,10,{11,12}}};
+
+    Closed files that were previously left open from test4600.cal
+    as executed by regress.cal and from opening /dev/null by
+    regress.cal itself.
+
+    Fixed memory leaks from f_strprintf() and f_putenv() in func.c.
+
+    The regress.cal test suite calls freeredc(), freestatics() and
+    freeglobals() at the end of the test suite to free storage
+    consumed during the regression.
+
+    Added custom function custom("pzasusb8", n) and lib/pzasusb8.cal based on
+    Ernest Bowen's diagnostic patch.
+
+    Thanks to the efforts of Ernest Bowen <ernie@neumann.une.edu.au> and
+    Dr.D.J.Picton <dave@aps5.ph.bham.ac.uk>, a nasty endian-ness bug
+    in the sha and sha1 hash functions that showed up on machines such
+    as the Sparc was fixed.
+
+    Added functionality from Ernest Bowen <ernie@turing.une.edu.au>
+    to give arguments as well as function names after definitions when
+    config("lib_debug") >= 0.
+
+    Removed if (config("lib_debug") >= 0) { ... } the ends of most
+    of the calc library scripts because it was redundant with the
+    new config("lib_debug") >= 0 functionality.  Some of the calc
+    library still has a partial section because some useful
+    additional information was being printed:
+
+	chrem.cal	deg.cal	     lucas_tbl.cal   randrun.cal
+	mfactor.cal	mod.cal	     poly.cal	     seedrandom.cal
+	surd.cal	varargs.cal
+
+    Fixed ellip.cal so that its defined function does not conflict with
+    the factor() builtin function.
+
+    Fixed mod.cal so that a defined function does not conflict with
+    the mod() builtin function.
+
+    The regression test suite now reads in most calc libs.  A few
+    libs are not read because they, by design, produce output
+    when read even when config("lib_debug") is set to -1.
+
+    Increased the maximum number of object types that one can define
+    from 10 to 128.
+
+    Added a patch from Ernest Bowen <ernie@turing.une.edu.au>
+    to correctly hash a V_STR value-type that has an \0 byte
+    inside it.
+
+    A patch from Ernest Bowen <ernie@turing.une.edu.au> now defines
+    special meaning to the first 2 bits of config("lib_debug"):
+
+	bit 0 set => messages printed when inputisterminal
+	bit 1 set => messages printed when reading from a file
+
+    The lib/regress.cal regression suite does:
+
+	config("lib_debug", -4);
+
+    to eliminate lib messages (both bit 0 and bit 1 are not set).
+
+    Fixed misc compile warnings and notices.
+
+
+Following is the change from calc version 2.10.3t5.38 to 2.11.0t0:
+
+    Fixed a few compile problems found under Red Hat 6.0 Linux.
+
+
+Following is the change from calc version 2.10.3t5.38 to 2.11.3t5.46:
 
     Fixed a bug discovered by Ernest Bowen related to matrix-to-matrix copies.
 

HOWTO.INSTALL

@@ -0,0 +1,55 @@
+Installing calc in 4 easy steps:
+
+    1) Look at the makefile, and adjust it to suit your needs.
+
+       Here are some Makefile hints:
+
+	   Select a compiler set by commenting in the appropriate set
+	   of cc options.  As shipped the Makefile assumes a gcc-like
+	   environment such as Linux.  If a more appropriate cc set if
+	   found below, comment out the Linux set and comment in that
+	   set or edit the gcc set or the common cc set as needed.
+
+	   You may or may not need RANLIB when building libraries.
+	   As shipped the Makefile assumes RANLIB is needed.
+	   Comment the in/out the RANLIB value if ranlib does
+	   not work or does not exist.
+
+	   You may want to change the default pager used by calc.
+	   As shipped the Makefile assumes 'more'.  On your system
+	   you may find 'less' to be a better pager.
+
+	   The CALCBINDINGS is matter of personal taste.  As shipped
+	   the Makefile assumes a default quasi-emacs-like command
+	   line editor.  Changing CALCBINDINGS= altbind will cause ^D
+	   to end calc in a fashion similar to that of the bc(1) command.
+
+	   Set TOPDIR to be the place under which help files, calc,
+	   include files and calc libs are to be installed.  As shipped
+	   the Makefile assumes a TOPDIR of /usr/local/lib.
+
+	   Set BINDIR to the place where calc is installed.  As shipped
+	   the Makefile assumes a BINDIR /usr/local/bin.
+
+	   Adjust other Makefile variables as needed.
+
+    2) build calc:
+
+	make all
+
+	==> We are interested in any compiler warnings (and errors) that
+	    you may find.  See the BUGS file if you find any compiler
+	    warning or errors.
+
+    3) test calc:
+
+	make check
+
+	==> If you run into problems, follow the BUGS file instructions.
+
+    4) install calc:
+
+	make install
+
+We suggest that you might want to read the README file and look at
+the calc help subsystem.  See the README file for details.

Makefile

@@ -206,17 +206,38 @@ HAVE_MEMMOVE=
 ALIGN32= -DMUST_ALIGN32
 #ALIGN32= -UMUST_ALIGN32
 
-# The return value type of main() differs from platform to platform.
-# In some cases, a compiler warning is issued because main() does
-# or does not return a value.
+# On most machines: errno sys_errlist and sys_nerr are declared
+# by either <stdio.h> and/or <errno.h>.  But some systems declare
+# them somewhere else or do not declare them at all!
 #
-# MAIN= -DMAIN=void	main() is of type void
-# MAIN= -DMAIN=int	main() is of type int
+# If the system were doing a proper job in headers, this should declare them:
 #
-# When in doubt, try MAIN= -DMAIN=void.  If you get a warning try the other.
+#	#include <stdio.h>
+#	#include <errno.h>
 #
-MAIN= -DMAIN=void
-#MAIN= -DMAIN=int
+# But one some systems one must explicitly declare them as:
+#
+#	extern int errno;
+#	extern const char *const sys_errlist[];
+#	extern int sys_nerr;
+#
+# and on some old systems they must be explicitly and incorrectly declared as:
+#
+#	extern int errno;
+#	extern char *sys_errlist[];
+#	extern int sys_nerr;
+#
+# ERRNO_DECL=			let calc_errno.c determine how to declare them
+# ERRNO_DECL= -DERRNO_NO_DECL	headers declare them correctly
+# ERRNO_DECL= -DERRNO_STD_DECL	one must explicitly declare then
+# ERRNO_DECL= -DERRNO_OLD_DECL	one must explicitly & incorrectly declare them
+#
+# When in doubt, be safe leave ERRNO_DECL empty.
+#
+ERRNO_DECL=
+#ERRNO_DECL= -DERRNO_NO_DECL
+#ERRNO_DECL= -DERRNO_STD_DECL
+#ERRNO_DECL= -DERRNO_OLD_DECL
 
 # where to install binary files
 #
@@ -293,7 +314,8 @@ CATEXT= 1
 #     The cat page is not built or installed
 #
 # If in doubt and you don't want to fool with man pages, set MANDIR
-# and CATDIR to empty and ignore the lines below.
+# and CATDIR to empty and ignore the NROFF, NROFF_ARG and MANMAKE
+# lines below.
 #
 NROFF= nroff
 #NROFF=
@@ -332,7 +354,7 @@ CALCPAGER= more
 
 # Debug/Optimize options for ${CC}
 #
-DEBUG= -O
+#DEBUG= -O
 #DEBUG= -O -g
 #DEBUG= -O -g3
 #DEBUG= -O1
@@ -340,7 +362,7 @@ DEBUG= -O
 #DEBUG= -O1 -g3
 #DEBUG= -O2
 #DEBUG= -O2 -g
-#DEBUG= -O2 -g3
+DEBUG= -O2 -g3
 #DEBUG= -O2 -ipa
 #DEBUG= -O2 -g3 -ipa
 #DEBUG= -O3
@@ -388,8 +410,8 @@ LD_NO_SHARED=
 # a *.a library.  Set RANLIB to the utility that performs this action.
 # Set RANLIB to : if your system does not need such a utility.
 #
-#RANLIB=ranlib
-RANLIB=:
+RANLIB=ranlib
+#RANLIB=:
 
 # Some systems are able to form lint libs.  How it is formed depends
 # on your system.  If you do not care about lint, use : as the
@@ -495,7 +517,6 @@ ALLOW_CUSTOM= -DCUSTOM
 # ICFLAGS are given to ${CC} for intermediate progs
 #
 # CCMAIN are flags for ${CC} when files with main() instead of CFLAGS
-# CCSHS are flags given to ${CC} for compiling shs.c & shs1.c instead of CFLAGS
 #
 # LCFLAGS are CC-style flags for ${LINT}
 # LDFLAGS are flags given to ${CC} for linking .o files
@@ -505,48 +526,63 @@ ALLOW_CUSTOM= -DCUSTOM
 #
 ###
 #
-# common cc set
+# Linux set
 #
-CCWARN=
+# Tested on Red Hat 6.0 Linux but should run on almost any Linux release.
+#
+# for better performance, set the following above:
+#     DEBUG= -O2
+#
+CCWARN= -Wall -Wno-implicit -Wno-comment
 CCOPT= ${DEBUG} ${NO_SHARED}
 CCMISC=
 #
 CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 ICFLAGS= ${CCWARN} ${CCMISC}
 #
-CCMAIN= ${ICFLAGS} ${MAIN}
-CCSHS= ${CFLAGS}
+CCMAIN= ${ICFLAGS}
 #
 LCFLAGS=
 LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
 ILDFLAGS=
 #
-CC= ${PURIFY} cc
+CC= ${PURIFY} gcc
 #
 ###
 #
-# SGI IRIX5.3 (or earlier) -o32 C Compiler
-#
-# You must set above:
-#	RANLIB=:
-#	LONGLONG_BITS= 0
+# gcc set	(some call it gcc2, some call it gcc)
 #
 # for better performance, set the following above:
-#	DEBUG= -O2 -g3
+#     DEBUG= -O2
 #
-# If you have the directory /usr/lib/nonshared, then set the following above:
-#	NO_SHARED= -non_shared
-#	LD_NO_SHARED= -Wl,-rdata_shared
-#
-#CCWARN= -fullwarn -woff 835
+#CCWARN= -Wall -Wno-implicit -Wno-comment
 #CCOPT= ${DEBUG} ${NO_SHARED}
-#CCMISC= -use_readonly_const
+#CCMISC=
 #
 #CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 #ICFLAGS= ${CCWARN} ${CCMISC}
 #
-#CCMAIN= ${ICFLAGS} ${MAIN}
-#CCSHS= ${CFLAGS}
+#CCMAIN= ${ICFLAGS}
+#
+#LCFLAGS=
+#LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
+#ILDFLAGS=
+#
+#CC= ${PURIFY} gcc
+#CC= ${PURIFY} gcc2
+#
+###
+#
+# common cc set
+#
+#CCWARN=
+#CCOPT= ${DEBUG} ${NO_SHARED}
+#CCMISC=
+#
+#CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
+#ICFLAGS= ${CCWARN} ${CCMISC}
+#
+#CCMAIN= ${ICFLAGS}
 #
 #LCFLAGS=
 #LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
@@ -577,8 +613,7 @@ CC= ${PURIFY} cc
 #CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 #ICFLAGS= ${CCWARN} ${CCMISC}
 #
-#CCMAIN= ${ICFLAGS} ${MAIN}
-#CCSHS=
+#CCMAIN= ${ICFLAGS}
 #
 #LCFLAGS=
 #LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
@@ -603,8 +638,7 @@ CC= ${PURIFY} cc
 #CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 #ICFLAGS= ${CCWARN} ${CCMISC}
 #
-#CCMAIN= ${ICFLAGS} ${MAIN}
-#CCSHS= ${CFLAGS}
+#CCMAIN= ${ICFLAGS}
 #
 #LCFLAGS=
 #LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
@@ -623,8 +657,7 @@ CC= ${PURIFY} cc
 #CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 #ICFLAGS= ${CCWARN} ${CCMISC}
 #
-#CCMAIN= ${ICFLAGS} ${MAIN}
-#CCSHS= ${CFLAGS}
+#CCMAIN= ${ICFLAGS}
 #
 #LCFLAGS=
 #LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
@@ -634,43 +667,22 @@ CC= ${PURIFY} cc
 #
 ###
 #
-# BSDI's BSD/OS 2.0 (or later) set
-#
-# for better performance, set the following above:
-#     DEBUG= -O2
-#
-#CCWARN= -Wall -Wno-implicit -Wno-comment
-#CCOPT= ${DEBUG} ${NO_SHARED}
-#CCMISC= -ansi
-#
-#CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
-#ICFLAGS= ${CCWARN} ${CCMISC}
-#
-#CCMAIN= ${ICFLAGS} ${MAIN}
-#CCSHS= ${CFLAGS}
-#
-#LCFLAGS=
-#LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
-#ILDFLAGS=
-#
-#CC= ${PURIFY} shlicc2
-#
-###
-#
-# Solaris 2.x Sun cc compiler
+# Solaris Sun cc compiler set
 #
 # for better performance, set the following above:
 #     DEBUG= -O
 #
+# We need -DFORCE_STDC to make use of ANSI-C like features and
+# to avoid the use of -Xc (which as a lose performance wise).
+#
 #CCWARN=
 #CCOPT= ${DEBUG} ${NO_SHARED}
-#CCMISC=-Xc
+#CCMISC= -DFORCE_STDC
 #
 #CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 #ICFLAGS= ${CCWARN} ${CCMISC}
 #
-#CCMAIN= ${ICFLAGS} ${MAIN}
-#CCSHS= ${CFLAGS}
+#CCMAIN= ${ICFLAGS}
 #
 #LCFLAGS=
 #LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
@@ -680,74 +692,47 @@ CC= ${PURIFY} cc
 #
 ###
 #
-# gcc set
-#
-# for better performance, set the following above:
-#     DEBUG= -O
-#
-#CCWARN= -Wall
-#CCOPT= ${DEBUG} ${NO_SHARED}
-#CCMISC= -ansi
-#
-#CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
-#ICFLAGS= ${CCWARN} ${CCMISC}
-#
-#CCMAIN= ${ICFLAGS} ${MAIN}
-#CCSHS= ${CFLAGS}
-#
-#LCFLAGS=
-#LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
-#ILDFLAGS=
-#
-#CC= ${PURIFY} gcc
-#
-###
-#
-# gcc1 set	(some call it gcc1, some call it gcc)
-#
-# for better performance, set the following above:
-#     DEBUG= -O
-#
-#CCWARN= -Wall
-#CCOPT= ${DEBUG} ${NO_SHARED}
-#CCMISC= -ansi
-#
-#CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
-#ICFLAGS= ${CCWARN} ${CCMISC}
-#
-#CCMAIN= ${ICFLAGS} ${MAIN}
-#CCSHS= ${CFLAGS}
-#
-#LCFLAGS=
-#LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
-#ILDFLAGS=
-#
-#CC= ${PURIFY} gcc1
-#CC= ${PURIFY} gcc
-#
-###
-#
-# gcc2 set	(some call it gcc2, some call it gcc)
+# BSDI's BSD/OS 4.0 (or later) set
 #
 # for better performance, set the following above:
 #     DEBUG= -O2
 #
 #CCWARN= -Wall -Wno-implicit -Wno-comment
 #CCOPT= ${DEBUG} ${NO_SHARED}
-#CCMISC= -ansi
+#CCMISC=
 #
 #CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 #ICFLAGS= ${CCWARN} ${CCMISC}
 #
-#CCMAIN= ${ICFLAGS} ${MAIN}
-#CCSHS= ${CFLAGS}
+#CCMAIN= ${ICFLAGS}
 #
 #LCFLAGS=
 #LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
 #ILDFLAGS=
 #
-#CC= ${PURIFY} gcc2
 #CC= ${PURIFY} gcc
+#
+###
+#
+# Dec Alpha / Compaq Tru64 cc (non-gnu) compiler set
+#
+# for better performance, set the following above:
+#     DEBUG= -O2
+#
+#CCWARN=
+#CCOPT= ${DEBUG} ${NO_SHARED}
+#CCMISC=
+#
+#CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
+#ICFLAGS= ${CCWARN} ${CCMISC}
+#
+#CCMAIN= ${ICFLAGS}
+#
+#LCFLAGS=
+#LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
+#ILDFLAGS=
+#
+#CC= ${PURIFY} cc
 
 ##############################################################################
 #-=-=-=-=-=-=-=-=- Be careful if you change something below -=-=-=-=-=-=-=-=-#
@@ -790,7 +775,7 @@ LIBSRC= addop.c assocfunc.c blkcpy.c block.c byteswap.c \
 	file.c func.c hash.c help.c hist.c input.c jump.c label.c \
 	lib_calc.c lib_util.c listfunc.c matfunc.c math_error.c \
 	md5.c obj.c opcodes.c pix.c poly.c prime.c qfunc.c qio.c \
-	qmath.c qmod.c qtrans.c quickhash.c shs.c shs1.c size.c \
+	qmath.c qmod.c qtrans.c quickhash.c seed.c shs.c shs1.c size.c \
 	string.c symbol.c token.c value.c version.c zfunc.c zio.c \
 	zmath.c zmod.c zmul.c zprime.c zrand.c zrandom.c
 
@@ -804,7 +789,7 @@ LIBOBJS= addop.o assocfunc.o blkcpy.o block.o byteswap.o calcerr.o \
 	file.o func.o hash.o help.o hist.o input.o jump.o label.o \
 	lib_calc.o lib_util.o listfunc.o matfunc.o math_error.o \
 	md5.o obj.o opcodes.o pix.o poly.o prime.o qfunc.o qio.o \
-	qmath.o qmod.o qtrans.o quickhash.o shs.o shs1.o size.o \
+	qmath.o qmod.o qtrans.o quickhash.o seed.o shs.o shs1.o size.o \
 	string.o symbol.o token.o value.o version.o zfunc.o zio.o \
 	zmath.o zmod.o zmul.o zprime.o zrand.o zrandom.o
 
@@ -834,7 +819,7 @@ BUILD_H_SRC= align32.h args.h calcerr.h conf.h endian_calc.h \
 	fposval.h have_const.h have_fpos.h have_malloc.h \
 	have_memmv.h have_newstr.h have_offscl.h have_posscl.h \
 	have_stdlib.h have_string.h have_times.h have_uid_t.h \
-	have_unistd.h longbits.h longlong.h terminal.h
+	have_unistd.h longbits.h longlong.h terminal.h calc_errno.h
 
 # we build these .c files during the make
 #
@@ -846,7 +831,7 @@ BUILD_C_SRC= calcerr.c
 #
 UTIL_C_SRC= align32.c endian.c longbits.c have_newstr.c have_uid_t.c \
 	have_const.c have_stdvs.c have_varvs.c fposval.c have_fpos.c \
-	longlong.c have_offscl.c have_posscl.c have_memmv.c
+	longlong.c have_offscl.c have_posscl.c have_memmv.c calc_errno.c
 
 # these awk and sed tools are used in the process of building BUILD_H_SRC
 # and BUILD_C_SRC
@@ -860,16 +845,17 @@ UTIL_MISC_SRC= calcerr_h.sed calcerr_h.awk calcerr_c.sed calcerr_c.awk \
 #
 UTIL_OBJS= endian.o longbits.o have_newstr.o have_uid_t.o \
 	have_const.o fposval.o have_fpos.o longlong.o try_strarg.o \
-	have_stdvs.o have_varvs.o have_posscl.o have_memmv.o
+	have_stdvs.o have_varvs.o have_posscl.o have_memmv.o calc_errno.o
 
 # these temp files may be created  (and removed) during the build of BUILD_C_SRC
 #
-UTIL_TMP= ll_tmp fpos_tmp fposv_tmp const_tmp uid_tmp newstr_tmp vs_tmp
+UTIL_TMP= ll_tmp fpos_tmp fposv_tmp const_tmp uid_tmp newstr_tmp vs_tmp \
+	calc_errno_tmp
 
 # these utility progs may be used in the process of building BUILD_H_SRC
 #
 UTIL_PROGS= align32 fposval have_uid_t longlong have_const \
-	endian longbits have_newstr have_stdvs have_varvs
+	endian longbits have_newstr have_stdvs have_varvs calc_errno
 
 # These files are required by the regress.cal regression test.
 #
@@ -913,7 +899,6 @@ SAMPLE_PASSDOWN= Q="${Q}" \
     TOPDIR="${TOPDIR}" \
     LIBDIR="${LIBDIR}" \
     HELPDIR="${HELPDIR}" \
-    MAIN="${MAIN}" \
     DEBUG="${DEBUG}" \
     NO_SHARED="${NO_SHARED}" \
     RANLIB="${RANLIB}" \
@@ -946,7 +931,7 @@ C_SRC= ${LIBSRC} ${CALCSRC} ${UTIL_C_SRC}
 # These files are found (but not built) in the distribution
 #
 DISTLIST= ${C_SRC} ${H_SRC} ${MAKE_FILE} BUGS CHANGES LIBRARY README \
-	calc.man lint.sed README.FIRST ${UTIL_MISC_SRC}
+	calc.man lint.sed README.OLD HOWTO.INSTALL ${UTIL_MISC_SRC}
 
 # complete list of .o files
 #
@@ -999,17 +984,11 @@ calc.o: calc.c ${MAKE_FILE}
 	${CC} ${CCMAIN} ${CCOPT} ${ALLOW_CUSTOM} -c calc.c
 
 custom.o: custom.c ${MAKE_FILE}
-	${CC} ${CCOPT} ${ALLOW_CUSTOM} -c custom.c
+	${CC} ${CFLAGS} ${ALLOW_CUSTOM} -c custom.c
 
 hist.o: hist.c ${MAKE_FILE}
 	${CC} ${CFLAGS} ${TERMCONTROL} -c hist.c
 
-shs.o: shs.c ${MAKE_FILE}
-	${CC} ${CCSHS} -c shs.c
-
-shs1.o: shs1.c ${MAKE_FILE}
-	${CC} ${CCSHS} -c shs1.c
-
 func.o: func.c ${MAKE_FILE}
 	${CC} ${CFLAGS} ${ALLOW_CUSTOM} -c func.c
 
@@ -1841,6 +1820,98 @@ args.h: have_stdvs.c have_varvs.c have_string.h have_unistd.h have_string.h
 	    true; \
 	fi
 
+calc_errno.h: calc_errno.c ${MAKE_FILE}
+	-${Q}rm -f calc_errno.h calc_errno calc_errno_tmp
+	${Q}echo 'forming calc_errno.h'
+	${Q}echo '/*' > calc_errno.h
+	${Q}echo ' * DO NOT EDIT -- generated by the Makefile' >> calc_errno.h
+	${Q}echo ' */' >> calc_errno.h
+	${Q}echo '' >> calc_errno.h
+	${Q}echo '' >> calc_errno.h
+	${Q}echo '#if !defined(__CALC_ERRNO_H__)' >> calc_errno.h
+	${Q}echo '#define __CALC_ERRNO_H__' >> calc_errno.h
+	${Q}echo '' >> calc_errno.h
+	${Q}echo '' >> calc_errno.h
+	-${Q}if [ X"${ERRNO_DECL}" = X"-DERRNO_NO_DECL" ]; then \
+	    echo '/*' >> calc_errno.h; \
+	    echo ' * The calc Makefile explicitly told us' >> calc_errno.h; \
+	    echo ' * how to declare errno and friends.' >> calc_errno.h; \
+	    echo ' */' >> calc_errno.h; \
+	    echo '' >> calc_errno.h; \
+	    echo '#include <stdio.h>' >> calc_errno.h; \
+	    echo '#include <errno.h>' >> calc_errno.h; \
+	elif [ X"${ERRNO_DECL}" = X"-DERRNO_STD_DECL" ]; then \
+	    echo '/*' >> calc_errno.h; \
+	    echo ' * The calc Makefile explicitly told us' >> calc_errno.h; \
+	    echo ' * how to declare errno and friends.' >> calc_errno.h; \
+	    echo ' */' >> calc_errno.h; \
+	    echo '' >> calc_errno.h; \
+	    echo 'extern int errno;			' \
+		 '/* last system error */' >> calc_errno.h; \
+	    echo 'extern const char *const sys_errlist[];' \
+		 ' /* system error messages*/' >> calc_errno.h; \
+	    echo 'extern int sys_nerr;			' \
+		 '/* number of system errors */' >> calc_errno.h; \
+	elif [ X"${ERRNO_DECL}" = X"-DERRNO_OLD_DECL" ]; then \
+	    echo '/*' >> calc_errno.h; \
+	    echo ' * The calc Makefile explicitly told us' >> calc_errno.h; \
+	    echo ' * how to declare errno and friends.' >> calc_errno.h; \
+	    echo ' */' >> calc_errno.h; \
+	    echo '' >> calc_errno.h; \
+	    echo 'extern int errno;		' \
+		 '/* last system error */' >> calc_errno.h; \
+	    echo 'extern char *sys_errlist[];' \
+		 '	 /* system error messages*/' >> calc_errno.h; \
+	    echo 'extern int sys_nerr;		' \
+		 '/* number of system errors */' >> calc_errno.h; \
+	else \
+	    ${CC} ${CCMAIN} -DTRY_ERRNO_NO_DECL \
+		  calc_errno.c -o calc_errno 2>calc_errno_tmp; \
+	    if [ -x ./calc_errno ]; then \
+		./calc_errno >> calc_errno.h; \
+	    else \
+		${CC} ${CCMAIN} -DTRY_ERRNO_STD_DECL \
+		      calc_errno.c -o calc_errno 2>calc_errno_tmp; \
+		if [ -x ./calc_errno ]; then \
+		    ./calc_errno >> calc_errno.h; \
+		else \
+		    ${CC} ${CCMAIN} -DTRY_ERRNO_OLD_DECL \
+			  calc_errno.c -o calc_errno 2>calc_errno_tmp; \
+		    if [ -x ./calc_errno ]; then \
+			./calc_errno >> calc_errno.h; \
+		    else \
+	    echo '/*' >> calc_errno.h; \
+	    echo ' * We were unable to to determine' >> calc_errno.h; \
+	    echo ' * how to declare errno and friends.' >> calc_errno.h; \
+	    echo ' * So we will guess this will work' >> calc_errno.h; \
+	    echo ' * and hope for the best.' >> calc_errno.h; \
+	    echo ' */' >> calc_errno.h; \
+	    echo '' >> calc_errno.h; \
+	    echo 'extern int errno;			' \
+		 '/* last system error */' >> calc_errno.h; \
+	    echo 'extern const char *const sys_errlist[];' \
+		 ' /* system error messages*/' >> calc_errno.h; \
+	    echo 'extern int sys_nerr;			' \
+		 '/* number of system errors */' >> calc_errno.h; \
+		    fi; \
+		fi; \
+	    fi; \
+	fi
+	${Q}echo '' >> calc_errno.h
+	${Q}echo '' >> calc_errno.h
+	${Q}echo '#endif /* !__CALC_ERRNO_H__ */' >> calc_errno.h
+	-${Q}rm -f calc_errno calc_errno_tmp
+	${Q}echo 'calc_errno.h formed'
+	-@if [ -z "${Q}" ]; then \
+	    echo ''; \
+	    echo '=-=-= start of $@ =-=-='; \
+	    cat $@; \
+	    echo '=-=-= end of $@ =-=-='; \
+	    echo ''; \
+	else \
+	    true; \
+	fi
+
 calcerr.h: calcerr.tbl calcerr_h.sed calcerr_h.awk ${MAKE_FILE}
 	-${Q}rm -f calerr.h
 	${Q}echo 'forming calcerr.h'
@@ -2188,11 +2259,11 @@ bsdilist: ${DISTLIST} ${BUILD_H_SRC} calc.1
 ##
 
 check: all ./lib/regress.cal ${REGRESS_CAL}
-	${CALC_ENV} ./calc -i -q read regress
+	${CALC_ENV} ./calc -d -q read regress
 
 chk: ./lib/regress.cal ${REGRESS_CAL}
 	${V} echo '=-=-=-=-= start of $@ rule =-=-=-=-='
-	${CALC_ENV} ./calc -i -q read regress 2>&1 | ${AWK} -f check.awk
+	${CALC_ENV} ./calc -d -q read regress 2>&1 | ${AWK} -f check.awk
 	${V} echo '=-=-=-=-= end of $@ rule =-=-=-=-='
 
 ##
@@ -2227,7 +2298,7 @@ env:
 	@echo "HAVE_UID_T=${HAVE_UID_T}"; echo ""
 	@echo "HAVE_NEWSTR=${HAVE_NEWSTR}"; echo ""
 	@echo "ALIGN32=${ALIGN32}"; echo ""
-	@echo "MAIN=${MAIN}"; echo ""
+	@echo "ERRNO_DECL=${ERRNO_DECL}"; echo ""
 	@echo "BINDIR=${BINDIR}"; echo ""
 	@echo "TOPDIR=${TOPDIR}"; echo ""
 	@echo "LIBDIR=${LIBDIR}"; echo ""
@@ -2262,7 +2333,6 @@ env:
 	@echo "CFLAGS=${CFLAGS}"; echo ""
 	@echo "ICFLAGS=${ICFLAGS}"; echo ""
 	@echo "CCMAIN=${CCMAIN}"; echo ""
-	@echo "CCSHS=${CCSHS}"; echo ""
 	@echo "LCFLAGS=${LCFLAGS}"; echo ""
 	@echo "LDFLAGS=${LDFLAGS}"; echo ""
 	@echo "ILDFLAGS=${ILDFLAGS}"; echo ""
@@ -2679,6 +2749,7 @@ byteswap.o: longbits.h
 byteswap.o: qmath.h
 byteswap.o: zmath.h
 calc.o: alloc.h
+calc.o: args.h
 calc.o: block.h
 calc.o: byteswap.h
 calc.o: calc.c
@@ -2714,6 +2785,7 @@ calc.o: symbol.h
 calc.o: token.h
 calc.o: value.h
 calc.o: zmath.h
+calc_errno.o: calc_errno.c
 calcerr.o: calcerr.c
 calcerr.o: calcerr.h
 calcerr.o: have_const.h
@@ -2891,6 +2963,7 @@ func.o: alloc.h
 func.o: block.h
 func.o: byteswap.h
 func.o: calc.h
+func.o: calc_errno.h
 func.o: calcerr.h
 func.o: cmath.h
 func.o: config.h
@@ -3257,7 +3330,6 @@ obj.o: symbol.h
 obj.o: value.h
 obj.o: zmath.h
 opcodes.o: alloc.h
-opcodes.o: args.h
 opcodes.o: block.h
 opcodes.o: byteswap.h
 opcodes.o: calc.h
@@ -3442,6 +3514,18 @@ quickhash.o: value.h
 quickhash.o: zmath.h
 quickhash.o: zrand.h
 quickhash.o: zrandom.h
+seed.o: alloc.h
+seed.o: byteswap.h
+seed.o: endian_calc.h
+seed.o: have_malloc.h
+seed.o: have_memmv.h
+seed.o: have_newstr.h
+seed.o: have_stdlib.h
+seed.o: have_string.h
+seed.o: longbits.h
+seed.o: qmath.h
+seed.o: seed.c
+seed.o: zmath.h
 shs.o: align32.h
 shs.o: alloc.h
 shs.o: block.h

README

@@ -1,68 +1,87 @@
-# Copyright (c) 1997 David I. Bell
-# Permission is granted to use, distribute, or modify this source,
-# provided that this copyright notice remains intact.
-#
-# Arbitrary precision calculator.
+Dear calc user,
 
-I am allowing this calculator to be freely distributed for your enjoyment.
-Like all multi-precision programs, you should not depend absolutely on
-its results, since bugs in such programs can be insidious and only rarely
-show up.
+See the HOWTO.INSTALL file for information on how to build and install calc.
 
--dbell-
+To be sure that your version of calc is up to date, check out:
 
-p.s. By Landon Curt Noll:
+	http://reality.sgi.com/chongo/calc/calc-download.html
 
-Building calc in 3 easy steps:
+We are interested in any/all feedback on recent versions of calc.
+In particular we would like to hear about:
 
-    1) Look at the makefile, and adjust it to suit your needs.
+    * compiler warnings
+    * compile problems
+    * regression test problems (try: make check)
+    * special compile flags/options that you needed
+    * Makefile problems
+    * help file problems
+    * misc nits and typos
 
-       Here are some Makefile hints:
+We would like to offer a clean compile across a wide verity of platforms,
+so if you can test on several, so much the better!
 
-	   In the past, some people have had to adjust the VARARG or
-	   TERMCONTROL because the Makefile cannot always guess
-	   correctly for certain systems.  You may need to play with
-	   these values if you experience problems.
-
-	   The default compiler used is 'cc'.  The default compiler flag
-	   is '-O'.  If you have gcc, or gcc v2 (or better) you should use
-	   that instead.   Some compilers allow for optimization beyond
-	   just -O (gcc v2 has -O2, mips cc has -O3).  You should select
-	   the best flag for speed optimization.  Calc can be cpu intensive
-	   so selecting a quality compiler and good optimization level can
-	   really pay off.
-
-    2) build calc:
-
-	make all
-
-    3) test calc:
-
-	make check
-
- ==>>>If you run into problems, follow the instructions in the BUGS file<<<==
+If you run into problems, see the BUGS file.
 
 =-=
 
-For further reading:
+Calc is distributed with an extensive collection of help files that
+are accessible from the command line.  The following assume that you
+are running calc from the distribution directory or that you have
+installed calc.  In these examples, the ">" is the calc prompt, not
+something that you type in.
 
-    LIBRARY
-    	explains how programs can use libcalc.a to take advantage
-	of the calc multi-precision routines.
+For list of help topics:
+
+    > help
+
+For overview of calc overview:
+
+    > help intro
+    > help overview
+    > help command
+    > help define
+    > help statement
+    > help variable
+
+For list of builtin functions:
+
+    > help builtin
+
+C programmers should note some unexpected differences in the calc syntax:
+
+    > help unexpected
+
+Calc is shipped with a library of calc scripts.  For a list see:
+
+    > help stdlib
+
+=-=
+
+See the file:
 
     help/todo
-	current wish list for calc
 
-    CHANGES
-	recent changes to calc
+or run:
 
-    BUGS
-	known bugs, mis-features and how to report problems
+    calc 'help todo'
 
-    help/full
-	full set of calc documentation
+for a wish/todo list.  Code contributions are welcome.
 
 =-=
 
-David I. Bell    dbell@auug.org.au
-chongo@toad.com	<Landon Curt Noll -- chongo@toad.com> /\../\
+To join the calc-tester mailing list.  Send a request to:
+
+     calc-tester-request@postofc.corp.sgi.com
+
+Your message body (not the subject) should consist of:
+
+     subscribe calc-tester address
+     end
+     name your_full_name
+
+where ``address'' is your EMail address and ``your_full_name'' is
+your full name.
+
+The calc web site is located at:
+
+	http://reality.sgi.com/chongo/calc

README.FIRST

@@ -1,52 +0,0 @@
-Dear alpha tester,
-
-Thanks for taking the time to try out this alpha version of calc!  We are
-interested in any/all feedback that you may have on this version.  In
-particular we would like to hear about:
-
-    * compile problems
-    * regression test problems (try: make check)
-    * compiler warnings
-    * special compile flags/options that you needed
-    * Makefile problems
-    * help file problems
-    * misc nits and typos
-
-We would like to offer a clean compile across a wide verity of platforms,
-so if you can test on several, so much the better!
-
-Calc distributions may be obtained from:
-
-	ftp://ftp.uu.net/pub/calc
-
-If you don't have ftp access to that site, or if you do not find a more
-recent version (you may have a special pre-released version that is
-more advanced than what is in the ftp archive) send EMail to:
-
-	chongo@toad.com
-
-Indicate the version you have and that you would like a more up
-to date version.
-
-=-=
-
-Misc items TODO before Beta release:
-
-    * improve the coverage in the 'SEE ALSO' help file lists
-
-    * where reasonable, be sure that regress.cal tests builtin functions
-
-    * add the Blum-Blum-Shub random() generator code
-
-    * add code to allow of the reading, writing and processing of binary data
-
-    * add shs, shs-1 and md5 hashing functions.  Use align32.h.
-
-    * add mod h*2^n+/-1 function for integers
-
-    * be sure that CHANGES is up to date,
-      look over the help/todo file and update as needed,
-      revisit issues in the BUGS file and
-      change this file  :-)
-
-    * clean the source code and document it better

README.OLD

@@ -0,0 +1,73 @@
+# Copyright (c) 1997 David I. Bell
+# Permission is granted to use, distribute, or modify this source,
+# provided that this copyright notice remains intact.
+#
+# Arbitrary precision calculator.
+
+  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+    NOTE: This is an old historic README.  We recommend that
+	  you read README and HOWTO.INSTALL for more info.
+  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+I am allowing this calculator to be freely distributed for your enjoyment.
+Like all multi-precision programs, you should not depend absolutely on
+its results, since bugs in such programs can be insidious and only rarely
+show up.
+
+-dbell-
+
+p.s. By Landon Curt Noll:
+
+Building calc in 3 easy steps:
+
+    1) Look at the makefile, and adjust it to suit your needs.
+
+       Here are some Makefile hints:
+
+	   In the past, some people have had to adjust the VARARG or
+	   TERMCONTROL because the Makefile cannot always guess
+	   correctly for certain systems.  You may need to play with
+	   these values if you experience problems.
+
+	   The default compiler used is 'cc'.  The default compiler flag
+	   is '-O'.  If you have gcc, or gcc v2 (or better) you should use
+	   that instead.   Some compilers allow for optimization beyond
+	   just -O (gcc v2 has -O2, mips cc has -O3).  You should select
+	   the best flag for speed optimization.  Calc can be cpu intensive
+	   so selecting a quality compiler and good optimization level can
+	   really pay off.
+
+    2) build calc:
+
+	make all
+
+    3) test calc:
+
+	make check
+
+ ==>>>If you run into problems, follow the instructions in the BUGS file<<<==
+
+=-=
+
+For further reading:
+
+    LIBRARY
+    	explains how programs can use libcalc.a to take advantage
+	of the calc multi-precision routines.
+
+    help/todo
+	current wish list for calc
+
+    CHANGES
+	recent changes to calc
+
+    BUGS
+	known bugs, mis-features and how to report problems
+
+    help/full
+	full set of calc documentation
+
+=-=
+
+David I. Bell    dbell@auug.org.au
+chongo <Landon Curt Noll> /\../\

addop.c

@@ -135,6 +135,7 @@ endfunc(void)
 {
 	register FUNC *fp;		/* function just finished */
 	unsigned long size;		/* size of just created function */
+	long index;
 
 	if (oldop != OP_RETURN) {
 		addop(OP_UNDEF);
@@ -163,14 +164,23 @@ endfunc(void)
 			size += dumpop(&fp->f_opcodes[size]);
 		}
 	}
+	if ((inputisterminal() && conf->lib_debug & 1) ||
+		(!inputisterminal() && conf->lib_debug & 2)) {
+		printf("%s(", fp->f_name);
+		for (index = 0; index <  fp->f_paramcount; index++) {
+			if (index)
+				putchar(',');
+			printf("%s", paramname(index));
+		}
+		printf(") ");
+		if (functions[newindex])
+			printf("re");
+		printf("defined\n");
+	}
 	if (functions[newindex]) {
 		freenumbers(functions[newindex]);
 		free(functions[newindex]);
-		if (inputisterminal() || conf->lib_debug >= 0)
-			printf("%s() redefined\n", fp->f_name);
 	}
-	else if (inputisterminal() || conf->lib_debug >= 0)
-		printf("%s() defined\n", fp->f_name);
 	functions[newindex] = fp;
 	objuncache();
 }
@@ -228,7 +238,8 @@ rmuserfunc(char *name)
 		return;
 	freenumbers(functions[index]);
 	free(functions[index]);
-	if (!inputisterminal() && conf->lib_debug >= 0)
+	if ((inputisterminal() && conf->lib_debug & 1) ||
+			(!inputisterminal() && conf->lib_debug & 2))
 		printf("%s() undefined\n", name);
 	functions[index] = NULL;
 }
@@ -438,6 +449,11 @@ addop(long op)
 			case OP_GLOBALADDR:
 				diff = 1 + PTR_SIZE;
 				break;
+			case OP_UNDEF:
+				fp->f_opcodecount -= 1;
+				oldop = OP_NOP;
+				oldoldop = OP_NOP;
+				return;
 			default:
 				cut = FALSE;
 			}

align32.c

@@ -30,7 +30,7 @@
 static void buserr(void);	/* catch alignment errors */
 
 
-MAIN
+int
 main(void)
 {
 	char byte[2*sizeof(USB32)];	/* mis-alignment buffer */
@@ -58,7 +58,8 @@ main(void)
 	   '/', '/');
 
 #endif
-	exit(0);
+	/* exit(0); */
+	return 0;
 }
 
 

alloc.h

@@ -17,7 +17,7 @@
 #ifdef HAVE_MALLOC_H
 # include <malloc.h>
 #else
-# if defined(__STDC__) && __STDC__ != 0
+#if defined(FORCE_STDC) || (defined(__STDC__) && __STDC__ != 0) || defined(__cplusplus)
    extern void *malloc();
    extern void *realloc();
    extern void free();
@@ -36,7 +36,7 @@
 # if defined(HAVE_NEWSTR)
 extern void *memcpy();
 extern void *memset();
-#  if defined(__STDC__) && __STDC__ != 0
+#if defined(FORCE_STDC) || (defined(__STDC__) && __STDC__ != 0) || defined(__cplusplus)
 extern size_t strlen();
 #  else
 extern long strlen();
@@ -65,7 +65,7 @@ extern int strcmp();
 
 #if !defined(HAVE_MEMMOVE)
 # undef CALC_SIZE_T
-# if defined(__STDC__) && __STDC__ != 0
+#if defined(FORCE_STDC) || (defined(__STDC__) && __STDC__ != 0) || defined(__cplusplus)
 #  define CALC_SIZE_T size_t
 # else
 #  define CALC_SIZE_T long

block.c

@@ -71,7 +71,7 @@ static void blkchk(BLOCK*);
 BLOCK *
 blkalloc(int len, int chunk)
 {
-	BLOCK *new;	/* new block allocated */
+	BLOCK *nblk;	/* new block allocated */
 
 	/*
 	 * firewall
@@ -84,8 +84,8 @@ blkalloc(int len, int chunk)
 	/*
 	 * allocate BLOCK
 	 */
-	new = (BLOCK *)malloc(sizeof(BLOCK));
-	if (new == NULL) {
+	nblk = (BLOCK *)malloc(sizeof(BLOCK));
+	if (nblk == NULL) {
 		math_error("cannot allocate block");
 		/*NOTREACHED*/
 	}
@@ -93,23 +93,23 @@ blkalloc(int len, int chunk)
 	/*
 	 * initialize BLOCK
 	 */
-	new->blkchunk = chunk;
-	new->maxsize = ((len+chunk)/chunk)*chunk;
-	new->data = (USB8*)malloc(new->maxsize);
-	if (new->data == NULL) {
+	nblk->blkchunk = chunk;
+	nblk->maxsize = ((len+chunk)/chunk)*chunk;
+	nblk->data = (USB8*)malloc(nblk->maxsize);
+	if (nblk->data == NULL) {
 		math_error("cannot allocate block data storage");
 		/*NOTREACHED*/
 	}
-	memset(new->data, 0, new->maxsize);
-	new->datalen = len;
+	memset(nblk->data, 0, nblk->maxsize);
+	nblk->datalen = len;
 
 	/*
 	 * return BLOCK
 	 */
 	if (conf->calc_debug > 0) {
-		blkchk(new);
+		blkchk(nblk);
 	}
-	return new;
+	return nblk;
 }
 
 
@@ -227,7 +227,7 @@ blkchk(BLOCK *blk)
 BLOCK *
 blkrealloc(BLOCK *blk, int newlen, int newchunk)
 {
-	USB8 *new;	/* realloced storage */
+	USB8 *nblk;	/* realloced storage */
 	int newmax;	/* new maximum stoage size */
 
 	/*
@@ -258,20 +258,20 @@ blkrealloc(BLOCK *blk, int newlen, int newchunk)
 	if (newmax != blk->maxsize) {
 
 		/* reallocate new storage */
-		new = (USB8*)realloc(blk->data, newmax);
-		if (new == NULL) {
+		nblk = (USB8*)realloc(blk->data, newmax);
+		if (nblk == NULL) {
 			math_error("cannot reallocate block storage");
 			/*NOTREACHED*/
 		}
 
 		/* clear any new storage */
 		if (newmax > blk->maxsize) {
-			memset(new + blk->maxsize, 0, (newmax - blk->maxsize));
+			memset(nblk+blk->maxsize, 0, (newmax-blk->maxsize));
 		}
 		blk->maxsize = newmax;
 
 		/* restore the data pointers */
-		blk->data = new;
+		blk->data = nblk;
 	}
 
 	/*
@@ -391,13 +391,13 @@ blktrunc(BLOCK *blk)
 BLOCK *
 blk_copy(BLOCK *blk)
 {
-	BLOCK *new;		/* copy of blk */
+	BLOCK *nblk;		/* copy of blk */
 
 	/*
 	 * malloc new block
 	 */
-	new = (BLOCK *)malloc(sizeof(BLOCK));
-	if (new == NULL) {
+	nblk = (BLOCK *)malloc(sizeof(BLOCK));
+	if (nblk == NULL) {
 		math_error("blk_copy: cannot malloc BLOCK");
 		/*NOTREACHED*/
 	}
@@ -405,18 +405,18 @@ blk_copy(BLOCK *blk)
 	/*
 	 * duplicate most of the block
 	 */
-	*new = *blk;
+	*nblk = *blk;
 
 	/*
 	 * duplicate block data
 	 */
-	new->data = (USB8 *)malloc(blk->maxsize);
-	if (new->data == NULL) {
+	nblk->data = (USB8 *)malloc(blk->maxsize);
+	if (nblk->data == NULL) {
 		math_error("blk_copy: cannot duplicate block data");
 		/*NOTREACHED*/
 	}
-	memcpy(new->data, blk->data, blk->maxsize);
-	return new;
+	memcpy(nblk->data, blk->data, blk->maxsize);
+	return nblk;
 }
 
 

calc.c

@@ -11,7 +11,6 @@
 #include <pwd.h>
 #include <sys/types.h>
 #include <ctype.h>
-#include <setjmp.h>
 
 #define CALC_C
 #include "calc.h"
@@ -37,157 +36,141 @@
 #include <stdlib.h>
 #endif
 
-
 /*
- * external and static definitions
- */
-extern int abortlevel;		/* current level of aborts */
-extern BOOL inputwait;		/* TRUE if in a terminal input wait */
-extern jmp_buf jmpbuf;		/* for errors */
-extern int isatty(int tty);	/* TRUE if fd is a tty */
-
-extern int p_flag;		/* TRUE => pipe mode */
-extern int q_flag;		/* TRUE => don't execute rc files */
-extern int u_flag;		/* TRUE => unbuffer stdin and stdout */
-
-extern char *pager;		/* $PAGER or default */
-extern int stdin_tty;		/* TRUE if stdin is a tty */
-extern char *program;		/* our name */
-extern char cmdbuf[];		/* command line expression */
-
-extern char *version(void);	/* return version string */
-
-
-/*
- * forward static functions
+ * static definitions and functions
  */
+static char *usage = "usage: %s [-c] [-C] [-d] [-e] [-h] [-i] [-m mode]\n"
+		     "\t[-n] [-p] [-q] [-u] [-v] [[--] calc_cmd ...]\n";
 static void intint(int arg);	/* interrupt routine */
 
 
 /*
  * Top level calculator routine.
  */
-MAIN
+int
 main(int argc, char **argv)
 {
-	static char *str;	/* current option string or expression */
 	int want_defhelp = 0;	/* 1=> we only want the default help */
+	int cmdlen;		/* length of the command string */
+	extern char *optarg;	/* option argument */
+	extern int optind;	/* option index */
+	int c;			/* option */
 	long i;
-	char *p;
 
 	/*
 	 * parse args
 	 */
 	program = argv[0];
-	argc--;
-	argv++;
-	while ((argc > 0) && (**argv == '-')) {
-		for (str = &argv[0][1]; *str; str++) switch (*str) {
-			case 'C':
+	while ((c = getopt(argc, argv, "Cehim:npquvcd")) != -1) {
+		switch (c) {
+		case 'C':
 #if defined(CUSTOM)
-				allow_custom = TRUE;
-				break;
-#else
-				fprintf(stderr,
-				    "Calc was built with custom functions "
-				    "disabled, -C usage is disallowed\n");
-				/*
-				 * we are too early in processing to call
-				 * libcalc_call_me_last() - nothing to cleanup
-				 */
-				exit(1);
-#endif /* CUSTOM */
-			case 'e':
-				no_env = TRUE;
-				break;
-			case 'h':
-				want_defhelp = 1;
-				break;
-			case 'i':
-				ign_errmax = TRUE;
-				break;
-			case 'm':
-				if (argv[0][2]) {
-					p = &argv[0][2];
-				} else if (argc > 1) {
-					p = argv[1];
-					argc--;
-					argv++;
-				} else {
-					fprintf(stderr, "-m requires an arg\n");
-					/*
-					 * we are too early in processing to
-					 * call libcalc_call_me_last()
-					 * nothing to cleanup
-					 */
-					exit(1);
-				}
-				if (p[1] != '\0' || *p < '0' || *p > '7') {
-					fprintf(stderr, "unknown -m arg\n");
-					/*
-					 * we are too early in processing to
-					 * call libcalc_call_me_last()
-					 * nothing to cleanup
-					 */
-					exit(1);
-				}
-				allow_read = (((*p-'0') & 04) > 0);
-				allow_write = (((*p-'0') & 02) > 0);
-				allow_exec = (((*p-'0') & 01) > 0);
-				break;
-			case 'n':
-				new_std = TRUE;
-				break;
-			case 'p':
-				p_flag = TRUE;
-				break;
-			case 'q':
-				q_flag = TRUE;
-				break;
-			case 'u':
-				u_flag = TRUE;
-				break;
-			case 'v':
-				printf("%s (version %s)\n",
-				    CALC_TITLE, version());
-				/*
-				 * we are too early in processing to call
-				 * libcalc_call_me_last() - nothing to cleanup
-				 */
-				exit(0);
-			default:
-				fprintf(stderr,
-			"usage: %s [-C] [-e] [-h] [-i] [-m mode] [-n] [-p]\n",
-				    program);
-				fprintf(stderr, "\t[-q] [-u] [calc_cmd ...]\n");
-				/*
-				 * we are too early in processing to call
-				 * libcalc_call_me_last() - nothing to cleanup
-				 */
-				exit(1);
-		}
-		argc--;
-		argv++;
-	}
-	cmdbuf[0] = '\0';
-	str = cmdbuf;
-	while (--argc >= 0) {
-		i = (long)strlen(*argv);
-		if (i+3 >= MAXCMD) {
-			fprintf(stderr, "command in arg list too long\n");
+			allow_custom = TRUE;
+			break;
+#else /* CUSTOM */
 			/*
 			 * we are too early in processing to call
 			 * libcalc_call_me_last() - nothing to cleanup
 			 */
+			fprintf(stderr,
+			    "%s: calc was built with custom functions "
+			    "disabled, -C usage is disallowed\n", program);
+			exit(1);
+#endif /* CUSTOM */
+		case 'e':
+			no_env = TRUE;
+			break;
+		case 'h':
+			want_defhelp = 1;
+			break;
+		case 'i':
+			i_flag = TRUE;
+			break;
+		case 'm':
+			if (optarg[1] == '\0' || *optarg<'0' || *optarg>'7') {
+				/*
+				 * we are too early in processing to
+				 * call libcalc_call_me_last()
+				 * nothing to cleanup
+				 */
+				fprintf(stderr,
+					"%s: unknown -m arg\n", program);
+				exit(1);
+			}
+			allow_read = (((*optarg-'0') & 04) > 0);
+			allow_write = (((*optarg-'0') & 02) > 0);
+			allow_exec = (((*optarg-'0') & 01) > 0);
+			break;
+		case 'n':
+			new_std = TRUE;
+			break;
+		case 'p':
+			p_flag = TRUE;
+			break;
+		case 'q':
+			q_flag = TRUE;
+			break;
+		case 'u':
+			u_flag = TRUE;
+			break;
+		case 'c':
+			c_flag = TRUE;
+			break;
+		case 'd':
+			d_flag = TRUE;
+			break;
+		case 'v':
+			/*
+			 * we are too early in processing to call
+			 * libcalc_call_me_last() - nothing to cleanup
+			 */
+			printf("%s (version %s)\n", CALC_TITLE, version());
+			exit(0);
+		default:
+			/*
+			 * we are too early in processing to call
+			 * libcalc_call_me_last() - nothing to cleanup
+			 */
+			fprintf(stderr, usage, program);
 			exit(1);
 		}
-		*str++ = ' ';
-		strcpy(str, *argv++);
-		str += i;
-		str[0] = '\n';
-		str[1] = '\0';
 	}
-	str = cmdbuf;
+	havecommands = (optind < argc);
+
+	/*
+	 * look at the length of any trailing command args
+	 *
+	 * We make room for the trailing '\0\n' as well as an extra guard byte.
+	 */
+	for (cmdlen=0, i=optind; i < argc; ++i) {
+		/* argument + space separator */
+		cmdlen += strlen(argv[i]) + 1;
+	}
+	if (i > MAXCMD) {
+		/*
+		 * we are too early in processing to call
+		 * libcalc_call_me_last() - nothing to cleanup
+		 */
+		fprintf(stderr,
+			"%s: command in arg list is too long\n", program);
+		exit(1);
+	}
+
+	/*
+	 * We will form a command the remaining args separated by spaces.
+	 */
+	cmdbuf[0] = '\0';
+	if (optind < argc) {
+		strcpy(cmdbuf, argv[optind]);
+		cmdlen = strlen(argv[optind]);
+		for (i=optind+1; i < argc; ++i) {
+			cmdbuf[cmdlen++] = ' ';
+			strcpy(cmdbuf+cmdlen, argv[i]);
+			cmdlen += strlen(argv[i]);
+		}
+		cmdbuf[cmdlen++] = '\n';
+		cmdbuf[cmdlen] = '\0';
+	}
 
 	/*
 	 * unbuffered mode
@@ -201,8 +184,7 @@ main(int argc, char **argv)
 	 * initialize
 	 */
 	libcalc_call_me_first();
-	stdin_tty = TRUE;	/* assume internactive default */
-	conf->tab_ok = TRUE;	/* assume internactive default */
+	stdin_tty = isatty(0);		/* assume stdin is on fd 0 */
 	if (want_defhelp) {
 		givehelp(DEFAULTCALCHELP);
 		libcalc_call_me_last();
@@ -212,39 +194,25 @@ main(int argc, char **argv)
 	/*
 	 * if allowed or needed, print version and setup bindings
 	 */
-	if (*str == '\0') {
-		/*
-		 * check for pipe mode and/or non-tty stdin
-		 */
-		if (!p_flag) {
-			stdin_tty = isatty(0);	/* assume stdin is on fd 0 */
-		}
-
-		/*
-		 * empty string arg is no string
-		 */
-		str = NULL;
-
-		/*
-		 * if tty, setup bindings
-		 */
-		if (stdin_tty) {
+	if (!havecommands && stdin_tty) {
+		if (!d_flag) {
 			printf("%s (version %s)\n", CALC_TITLE, version());
 			printf("[%s]\n\n",
 			    "Type \"exit\" to exit, or \"help\" for help.");
-			switch (hist_init(calcbindings)) {
+		}
+		switch (hist_init(calcbindings)) {
 			case HIST_NOFILE:
 				fprintf(stderr,
-				    "Cannot open bindings file \"%s\", %s.\n",
-				     calcbindings, "fancy editing disabled");
+				    "%s: Cannot open bindings file \"%s\", "
+				    "fancy editing disabled.\n",
+				     program, calcbindings);
 				break;
 
 			case HIST_NOTTY:
 				fprintf(stderr,
-					"Cannot set terminal modes, %s.\n",
-					"fancy editing disabled");
+					"%s: Cannot set terminal modes, "
+					"fancy editing disabled\n", program);
 				break;
-			}
 		}
 	}
 
@@ -256,53 +224,87 @@ main(int argc, char **argv)
 		/*
 		 * reset/initialize the computing environment
 		 */
-		if (post_init) {
+		if (post_init)
 			initialize();
-		} else {
-			/* initialize already done, jmpbuf is ready */
-			post_init = TRUE;	
-		}
-
-		/*
-		 * if arg mode or non-tty mode, just do the work and be gone
-		 */
-		if (str || !stdin_tty) {
-			if (q_flag == FALSE && allow_read) {
-				runrcfiles();
-				q_flag = TRUE;
-			}
-			if (str)
-				(void) openstring(str);
-			else
-				(void) openterminal();
-			start_done = TRUE;
-			getcommands(FALSE);
-			libcalc_call_me_last();
-			exit(0);
-		}
-	}
-	/* if in arg mode, we should not get here */
-	if (str) {
-		libcalc_call_me_last();
-		exit(1);
+		post_init = TRUE;
 	}
 
 	/*
-	 * process commands
+	 * (re)establish the interrupt handler
 	 */
-	if (!start_done) {
-		reinitialize();
-	}
 	(void) signal(SIGINT, intint);
-	start_done = TRUE;
-	getcommands(TRUE);
+
+	/*
+	 * execute calc code based on the run state
+	 */
+	if (run_state == RUN_PRE_BEGIN) {
+		if (!q_flag && allow_read) {
+			run_state = RUN_PRE_RCFILES;
+			runrcfiles();
+		}
+		run_state = RUN_POST_RCFILES;
+	}
+	if (run_state == RUN_PRE_RCFILES) {
+		fprintf(stderr, "Execution error in rcfiles\n");
+		if ((c_flag && !stoponerror) || stoponerror < 0) {
+			getcommands(FALSE);
+			run_state = RUN_POST_RCFILES;
+		} else {
+			if ((havecommands && !i_flag) || !stdin_tty)
+				run_state = RUN_STOP_ON_ERROR;
+			else if (havecommands)
+				run_state = RUN_POST_CMD_ARGS;
+			else
+				run_state = RUN_POST_RCFILES;
+		}
+	}
+	if (run_state == RUN_POST_RCFILES) {
+		if (havecommands) {
+			run_state = RUN_PRE_CMD_ARGS;
+			(void) openstring(cmdbuf);
+			getcommands(FALSE);
+		}
+		run_state = RUN_POST_CMD_ARGS;
+	}
+	if (run_state == RUN_PRE_CMD_ARGS) {
+		fprintf(stderr, "Execution error in commands\n");
+		if ((c_flag && !stoponerror) || stoponerror < 0) {
+			getcommands(FALSE);
+			run_state = RUN_POST_CMD_ARGS;
+		} else {
+			closeinput();
+			if (!stdin_tty || !i_flag)
+				run_state = RUN_STOP_ON_ERROR;
+			else
+				run_state = RUN_POST_CMD_ARGS;
+		}
+	}
+	if (run_state == RUN_POST_CMD_ARGS) {
+		if (stdin_tty && ((havecommands && !i_flag) || p_flag))
+			run_state = RUN_NOT_TOP_LEVEL;
+		else
+			openterminal();
+	} else if (run_state == RUN_TOP_LEVEL) {
+		if (!stdin_tty && (!c_flag || stoponerror) &&
+		    stoponerror >= 0) {
+			run_state = RUN_STOP_ON_ERROR;
+		} else if ((c_flag && !stoponerror) || stoponerror < 0)
+			getcommands(FALSE);
+		else
+			reinitialize();
+	}
+
+	if (run_state < RUN_NOT_TOP_LEVEL) {
+		run_state = RUN_TOP_LEVEL;
+		getcommands(TRUE);
+	}
 
 	/*
 	 * all done
 	 */
 	libcalc_call_me_last();
-	exit(0);
-	/*NOTREACHED*/
+	return (run_state == RUN_STOP_ON_ERROR ||
+		run_state == RUN_UNKNOWN) ? 1 : 0;
 }
 
 
@@ -339,7 +341,8 @@ math_error(char *fmt, ...)
 
 	if (funcname && (*funcname != '*'))
 		fprintf(stderr, "\"%s\": ", funcname);
-	if (funcline && ((funcname && (*funcname != '*')) || !inputisterminal()))
+	if (funcline && ((funcname && (*funcname != '*')) ||
+	    !inputisterminal()))
 		fprintf(stderr, "line %ld: ", funcline);
 	va_start(ap, fmt);
 	vsprintf(buf, fmt, ap);
@@ -349,7 +352,8 @@ math_error(char *fmt, ...)
 	if (post_init) {
 		longjmp(jmpbuf, 1);
 	} else {
-		fprintf(stderr, "no jmpbuf jumpback point - ABORTING!!!\n");
+		fprintf(stderr, "It is too early provide a command line prompt "
+				"so we must simply exit.  Sorry!\n");
 		/*
 		 * don't call libcalc_call_me_last() -- we might loop
 		 * and besides ... this is an unusual internal error case

calc.h

@@ -10,6 +10,7 @@
 #if !defined(__CALC_H__)
 #define	__CALC_H__
 
+#include <setjmp.h>
 
 #include "value.h"
 
@@ -26,7 +27,7 @@
 #define DEFAULTCALCHELP	"help"		/* help file that -h prints */
 #define DEFAULTSHELL	"sh"		/* default shell to use */
 #define	CALCEXT		".cal"	/* extension for files read in */
-#define	PATHSIZE	1024	/* maximum length of path name */
+#define	MAX_CALCRC	1024	/* maximum length of $CALCRC */
 #define	HOMECHAR	'~'	/* char which indicates home directory */
 #define DOTCHAR		'.'	/* char which indicates current directory */
 #define	PATHCHAR	'/'	/* char which separates path components */
@@ -37,7 +38,7 @@
 #define	SYMBOLSIZE	256	/* maximum symbol name size */
 #define	MAXINDICES	20	/* maximum number of indices for objects */
 #define	MAXLABELS	100	/* maximum number of user labels in function */
-#define	MAXOBJECTS	10	/* maximum number of object types */
+#define	MAXOBJECTS	128	/* maximum number of object types */
 #define	MAXSTRING	1024	/* maximum size of string constant */
 #define	MAXSTACK	1000	/* maximum depth of evaluation stack */
 #define	MAXFILES	20	/* maximum number of opened files */
@@ -58,6 +59,8 @@
 #define ABORT_MATH	3	/* abort on any math operation */
 #define ABORT_NOW	4	/* abort right away */
 
+#define ERRMAX 20		/* default errmax value */
+
 /*
  * File ids corresponding to standard in, out, error, and when not in use.
  */
@@ -144,15 +147,34 @@ extern void showerrors(void);
  */
 extern void initialize(void);
 extern void reinitialize(void);
-
+extern int isatty(int tty);	/* TRUE if fd is a tty */
+extern char *version(void);	/* return version string */
+extern int post_init;		/* TRUE => setjmp for math_error is ready */
 
 /*
- * Global data definitions.
+ * global flags and definitions
  */
+extern int abortlevel;		/* current level of aborts */
+extern BOOL inputwait;		/* TRUE if in a terminal input wait */
+extern jmp_buf jmpbuf;		/* for errors */
+
+extern int p_flag;		/* TRUE => pipe mode */
+extern int q_flag;		/* TRUE => don't execute rc files */
+extern int u_flag;		/* TRUE => unbuffer stdin and stdout */
+extern int d_flag;		/* TRUE => disable heading, lib_debug == 0 */
+extern int c_flag;		/* TRUE => continue after error if permitted */
+extern int i_flag;		/* TRUE => try to go interactive after error */
+extern int stoponerror;		/* >0 => stop, <0 => continue, ==0 => use -c */
+
+extern char *pager;		/* $PAGER or default */
+extern int stdin_tty;		/* TRUE if stdin is a tty */
+extern int havecommands;	/* TRUE if have cmd args) */
+extern char *program;		/* our name */
+extern char cmdbuf[];		/* command line expression */
+
 extern int abortlevel;		/* current level of aborts */
 extern BOOL inputwait;		/* TRUE if in a terminal input wait */
 extern VALUE *stack;		/* execution stack */
-extern int start_done;		/* TRUE => start up processing finished */
 extern int dumpnames;		/* TRUE => dump names rather than indices */
 
 extern char *calcpath;		/* $CALCPATH or default */
@@ -163,14 +185,28 @@ extern char *shell;		/* $SHELL or default */
 extern char *program;		/* our name (argv[0]) */
 
 extern int no_env;	/* TRUE (-e) => ignore env vars on startup */
-extern int ign_errmax;	/* TRUE (-i) => ignore when errcount exceeds errmax */
+extern int errmax;	/* if >= 0, error when errcount exceeds errmax */
 extern int new_std;	/* TRUE (-n) => use newstd configuration */
 
 extern int allow_read;	/* FALSE => may not open any files for reading */
 extern int allow_write;	/* FALSE => may not open any files for writing */
 extern int allow_exec;	/* FALSE => may not execute any commands */
 
-extern int post_init;	/* TRUE => setjmp for math_error is ready */
+/* 
+ * calc startup and run state 
+ */
+typedef enum {
+    RUN_UNKNOWN = -1,		/* unknown or unset start state */
+    RUN_PRE_BEGIN = 0,		/* pre-startup state, calc execution started */
+    RUN_PRE_RCFILES = 1,	/* rc files about to or are being evaluated */
+    RUN_POST_RCFILES = 2,	/* rc files have been evaluated */
+    RUN_PRE_CMD_ARGS = 3,	/* cmd_args about to or are being evaluated */
+    RUN_POST_CMD_ARGS = 4,	/* cmd_args have been evaluated */
+    RUN_TOP_LEVEL = 5,		/* running at the top interactive level */
+    RUN_NOT_TOP_LEVEL = 6,	/* running not at the top interactive level */
+    RUN_STOP_ON_ERROR = 7	/* we need to stop due to errors */
+} run;
+extern run run_state;	
 
 
 /*

calc.man

@@ -1,190 +1,356 @@
 .\"
-.\" Copyright (c) 1994 David I. Bell and Landon Curt Noll
+.\" Copyright (c) 1993 David I. Bell and Landon Curt Noll
+.\" Original man page dated 15nov93
+.\" Copyright (c) 1999 David I. Bell and Landon Curt Noll
 .\" Permission is granted to use, distribute, or modify this source,
 .\" provided that this copyright notice remains intact.
 .\"
 .\" calculator by David I. Bell
 .\" man page by Landon Noll
-.TH calc 1 "^..^" "15nov93"
+.TH calc 1 "^..^" "15Oct1999"
 .SH NAME
 calc \- arbitrary precision calculator
 .SH SYNOPSIS
 \fIcalc\fP
-[\fI\-h\fP]
-[\fI\-m mode\fP]
-[\fI\-p\fP]
-[\fI\-q\fP]
-[\fI\-u\fP]
-[\fI\-v\fP]
-[\fIcalc_cmd \&.\|.\|.\fp]
+.RB [ \-c ]
+.RB [ \-C ]
+.RB [ \-d ]
+.RB [ \-e ]
+.RB [ \-h ]
+.RB [ \-i ]
+.RB [ \-m\ \&mode ]
+.br
+.in +5n
+.RB [ \-n ]
+.RB [ \-p ]
+.RB [ \-q ]
+.RB [ \-u ]
+.RB [ \-v ]
+.RB [ calc_cmd\ \&.\|.\|. ]
+.in -5n
 .SH DESCRIPTION
 \&
 .br
 CALC COMMAND LINE
 .PP
+
 .TP
-\fI\-h\fP
-Print a help message.
-This option implies \fI \-q\fP.
-This is equivalent to the calc command \fIhelp help\fP.
-The help facility is disabled unless the \fImode\fP is 5 or 7.
-See \fI\-m\fP below.
-.sp
-.TP
-\fI\-m mode\fP
-This flag sets the permission mode of calc.
-It controls the ability for \fIcalc\fP to open files
-and execute programs.
-\fIMode\fP may be a number from 0 to 7.
-.sp
-The \fImode\fP value is interpreted in a way similar
-to that of the \fRchmod(1)\fP octal mode:
-.sp
-.in +0.5i
+.B \-c
+Continue reading command lines even after an execution
+error has caused the abandonment of a line.
+.sp 1
+For example:
+.sp 1
+.in +5n
 .nf
-0   do not open any file, do not execute progs
-1   do not open any file
-2   do not open files for reading, do not execute progs
-3   do not open files for reading
-4   do not open files for writing, do not execute progs
-5   do not open files for writing
-6   do not execute any program
-7   allow everything (default mode)
+calc read many_errors.cal
 .fi
-.in -0.5i
-.sp
-If one wished to run calc from a privledged user, one might
-want to use \fI\-m 0\fP in an effort to make calc more secure.
-.sp
-\fIMode\fP bits for reading and writing apply only on an open.
+.in -5n
+.sp 1
+will cause
+.B calc
+to abort on the first error, whereas:
+.sp 1
+.in +5n
+.nf
+calc -c read many_errors.cal
+.fi
+.in -5n
+.sp 1
+will
+cause
+.B calc
+to try to process each line being read
+despite the errors that it encounters.
+
+.TP
+.B \-C
+Permit the execution of custom builtin functions.  Without
+this flag, calling the custom() builtin function will
+simply generate an error.
+.sp 1
+Use if this flag may cause
+.B calc
+to execute functions that
+are non-standard and that are not portable.  Custom builtin
+functions are disabled by default for this reason.
+
+.TP
+.B \-d
+Disable the printing of the opening title.  The printing
+of library debug and informational messages is also disabled
+as if \fBconfig("lib_debug", 0)\fP had been executed.
+.sp 1
+For example:
+.sp 1
+.in +5n
+calc 'read qtime; qtime(2)'
+.in -5n
+.sp 1
+will output something like:
+.sp 1
+.in +5n
+.nf
+qtime(utc_hr_offset) defined
+It's nearly ten past six.
+.fi
+.in -5n
+.sp 1
+whereas:
+.sp 1
+.in +5n
+.nf
+calc -d 'read qtime; qtime(2)'
+.fi
+.in -5n
+.sp 1
+will just say:
+.sp 1
+.in +5n
+.nf
+It's nearly ten past six.
+.fi
+.in -5n
+.sp 1
+
+.TP
+.B \-e
+Ignore any environment variables on startup.
+The getenv() builtin will still return values, however.
+
+.TP
+.B \-h
+Print a help message.  This option implies
+.BR \-q .
+This
+is equivalent to the
+.B calc
+command help help.
+The help facility is disabled unless the mode is 5 or 7.
+See
+.BR \-m .
+
+.TP
+.B \-i
+Become interactive if possible.
+Be default, if
+.I calc_cmd
+args are given,
+.B calc
+will execute them and exit.
+This flag args are given,
+.B calc
+will execute them and exit.
+This flag will cause
+.B calc
+to drop into interactive mode after the
+commands are executed.
+.sp 1
+For example:
+.sp 1
+.in +5n
+.nf
+calc 2+5
+.fi
+.in -5n
+.sp 1
+will print the value 7 and exit whereas:
+.sp 1
+.in +5n
+.nf
+calc -i 2+5
+.fi
+.in -5n
+.sp 1
+will print the value 7 and prompt the user for more
+.B calc
+commands.
+
+.TP
+.BR \-m " mode"
+This flag sets the permission mode of
+.BR calc .
+It controls the ability for
+.B calc
+to open files and execute programs.
+Mode may be a number from 0 to 7.
+.sp 1
+The mode value is interpreted in a way similar to that
+of the
+.BR chmod (1)
+octal mode:
+.sp 1
+.in +5n
+.nf
+0  do not open any file, do not execute progs
+1  do not open any file
+2  do not open files for reading, do not execute progs
+3  do not open files for reading
+4  do not open files for writing, do not execute progs
+5  do not open files for writing
+6  do not execute any program
+7  allow everything (default mode)
+.fi
+.in -5n
+.sp 1
+If one wished to run
+.B calc
+from a privileged user, one might want to use
+.B \-m
+0 in an effort to make
+.B calc
+somewhat more secure.
+.sp 1
+Mode bits for reading and writing apply only on an
+open.
 Files already open are not effected.
-Thus if one wanted to use the \fI\-m 0\fP in an effort to make
-\fIcalc\fP more secure, but still wanted to read and write a specific
-file, one might want to do:
-.sp
-.in +0.5i
+Thus if one wanted to use the
+.B \-m
+0 in an effort to make
+.B calc
+somewhat more secure, but still wanted to read and write a specific
+file, one might want to do in
+.BR sh (1),
+.BR ksh (1),
+.BR bash (1)-like
+shells:
+.sp 1
+.in +5n
 .nf
-\fRcalc \-m 0 3<a.file\fP
+calc -m 0 3<a.file
 .fi
-.in -0.5i
-.sp
-Files presented to \fIcalc\fP in this way are opened in an unknown mode.
-\fICalc\fP will attempt to read or write them if directed.
-.sp
-If the \fImode\fP disables opening of files for reading, then
-the startup library scripts are disabled as of \fI\-q\fP was given.
-The reading of key bindings is also disabled when the \fImode\fP
-disables opening of files for reading.
+.in -5n
+.sp 1
+Files presented to
+.B calc
+in this way are opened in an
+unknown mode.
+.B Calc
+will attempt to read or write them if directed.
+.sp 1
+If the mode disables opening of files for reading, then
+the startup library scripts are disabled as of
+.B \-q
+was given.
+The reading of key bindings is also disabled
+when the mode disables opening of files for reading.
+
 .TP
-\fI \-p\fP
-Pipe processing is enabled by use of \-p.  For example:
-.sp
-.in +0.5i
+.B \-n
+Use the new configuration defaults instead of the old
+default classic defaults.
+This flag as the same effect
+as executing \fBconfig("all", "newcfg")\fP at startup time.
+
+.TP
+.B \-p
+Pipe processing is enabled by use of
+.BR \-p .
+For example:
+.sp 1
+.in +5n
 .nf
-\fRecho "print 2^21701\-1, 2^23209\-1" | calc \-p | fizzbin\fP
+calc -p '2^21701-1' | fizzbin
 .fi
-.in -0.5i
-.sp
-In pipe mode, \fIcalc\fP does not prompt, does not print leading tabs
-and does not print the initial header.
+.in -5n
+.sp 1
+In pipe mode,
+.B calc
+does not prompt, does not print leading
+tabs and does not print the initial header.
+The
+.B \-p
+flag overrides
+.BR \-i .
+
 .TP
-\fI \-q\fP
-Disable the use of the \fI$CALCRC\fP startup scripts.
+.B \-q
+Disable the use of the $CALCRC startup scripts.
+
 .TP
-\fI \-u\fP
+.B \-u
 Disable buffering of stdin and stdout.
+
 .TP
-\fI \-v\fP
-Print the version and exit.
+.B \-v
+Print the
+.B calc
+version number and exit.
 .PP
-Without \fIcalc_cmd\fPs, \fIcalc\fP operates interactively.
-If one or more \fIcalc_cmd\fPs are given on the command line,
-\fIcalc\fP will execute them and exit.
-The printing of leading tabs on output is disabled
-as if \fIconfig("tab",0)\fP had been executed.
+Without
+.IR calc_cmd ,
+.B calc
+operates interactively.
+If one or more
+.I calc_cmd
+are given on the command line,
+.B calc
+will execute them and exit.
+If
+.B \-i
+is given,
+.B calc
+will attempt to become interactive
+even of one or more
+.I calc_cmd
+are given on the command line.
 .PP
-Normally on startup, \fIcalc\fP attempts to execute a collection
-of library scripts.
-The environment variable \fI$CALCRC\fP (if non-existent then
-a compiled in value) contains a \fI:\fP separated list of
-startup library scripts.
-No error conditions are produced if these startup library scripts
-are not found.
+Normally on startup,
+.B calc
+attempts to execute a collection of
+library scripts.
+The environment variable $CALCRC (if non-existent
+then a compiled in value) contains a :  separated list of startup
+library scripts.
+No error conditions are produced if these startup
+library scripts are not found.
 .PP
-If the \fImode\fP disables opening of files for reading, then
-the startup library scripts are disabled as of \fI\-q\fP was given
-and \fI$CALCRC\fP as well as the default compiled in value are ignored.
+If the mode disables opening of files for reading, then the startup
+library scripts are disabled as of
+.B \-q
+was given and $CALCRC as well
+as the default compiled in value are ignored.
 .PP
 Filenames are subject to ``~'' expansion (see below).
-The environment variable \fI$CALCPATH\fP (if non-existent then
-a compiled in value) contains a \fI:\fP separated list of search
-directories.
-If a file does not begin with \fI/\fP, \fI~\fP or \fI./\fP,
-then it is searched for under each directory listed in the \fI$CALCPATH\fP.
-It is an error if no such readable file is found.
+The
+environment variable $CALCPATH (if non-existent then a compiled in
+value) contains a : separated list of search directories.
+If a
+file does not begin with /, ~ or ./, then it is searched for under
+each directory listed in the $CALCPATH.
+It is an error if no such
+readable file is found.
 .PP
-Calc treats all open files, other than stdin, stdout and stderr
-as files available for reading and writing.
-One may present calc with an already open file in the following way:
-.sp
-.in +0.5i
+.B Calc
+treats all open files, other than stdin, stdout and
+stderr as files available for reading and writing.
+One may
+present
+.B calc
+with an already open file using
+.BR sh (1),
+.BR ksh (1),
+.BR bash (1)-like
+shells is to:
+.sp 1
+.in +5n
+calc 3<open_file 4<open_file2
+.in -5n
+.sp 1
+For more information use the following
+.B calc
+commands:
+.sp 1
+.in +5n
 .nf
-\fRcalc 3<open_file 4<open_file2\fP
-.fi
-.in -0.5i
-.PP
-For more information use the following calc commands:
-.PP
-.in 1.0i
-help usage
-.br
 help help
-.br
+help overview
+help usage
 help environment
-.in -1.0i
-.PP
-OVERVIEW
-.PP
-\fICalc\fP is arbitrary precision arithmetic system that uses
-a C-like language.
-\fICalc\fP is useful as a calculator, an algorithm prototyped
-and as a mathematical research tool.
-More importantly, \fIcalc\fP provides one with a machine
-independent means of computation.
-.PP
-\fICalc\fP comes with a rich set of builtin mathematical
-and programmatic functions.
-.PP
-\fICalc\fP is distributed with library of scripts.
-Written in the same C-like language, library scripts may be
-read in and executed during a \fIcalc\fP session.
-These library scripts are also provided because they are
-useful and to serve as examples of the \fIcalc\fP language.
-One may further extend \fIcalc\fP thru the
-use of user defined scripts.
-.PP
-Internally calc represents numeric values as fractions reduced to their
-lowest terms.
-The numerators and denominators of these factions may grow to
-arbitrarily large values.
-Numeric values read in are automatically converted into rationals.
-The user need not be aware of this internal representation.
-.PP
-For more information use the following calc commands:
-.PP
-.in 1.0i
-help intro
-.br
-help builtin
-.br
-help stdlib
-.br
-help define
-.br
-show builtins
-.br
-show functions
-.in -1.0i
+help config
+.fi
+.in -5n
+.sp 1
 .PP
 DATA TYPES
 .PP
@@ -199,7 +365,9 @@ multiplication, division, negation, squaring, modulus,
 rounding, exponentiation, equality, comparison, printing
 and so on.
 .PP
-For more information use the following calc commands:
+For more information use the following
+.B calc
+commands:
 .PP
 .in 1.0i
 help types
@@ -220,7 +388,9 @@ procedure.
 Values may be grouped together in a matrix, or into a
 a list that permits stack and queue style operations.
 .PP
-For more information use the following calc commands:
+For more information use the following
+.B calc
+commands:
 .PP
 .in 1.0i
 help variable
@@ -256,7 +426,9 @@ For example:
 ~chongo/lib/fft_multiply.cal
 .in -1.0i
 .PP
-For more information use the following calc command:
+For more information use the following
+.B calc
+command:
 .PP
 .in 1.0i
 help file
@@ -275,7 +447,9 @@ These include commands such as function definition, help,
 reading in library scripts, dump files to a file, error notification,
 configuration control and status.
 .PP
-For more information use the following calc command:
+For more information use the following
+.B calc
+command:
 .PP
 .in 1.0i
 help command
@@ -295,7 +469,8 @@ help config
 .PD 0
 .TP 20
 ${LIBDIR}/*.cal
-library scripts shipped with calc
+library scripts shipped with
+.B calc
 .br
 .sp
 .TP 20
@@ -323,7 +498,9 @@ Default value: ${CALCPATH}
 .TP 5
 CALCRC
 On startup (unless \-h or \-q was given on the command
-line), calc searches for files along this :-separated
+line),
+.B calc
+searches for files along this :-separated
 environment variable.
 .br
 .sp
@@ -333,7 +510,9 @@ Default value: ${CALCRC}
 .TP 5
 CALCBINDINGS
 On startup (unless \fI\-h\fP or \fI\-q\fP was given on the command
-line, or \fI\-m\fP disallows opening files for reading), calc reads
+line, or \fI\-m\fP disallows opening files for reading),
+.B calc
+reads
 key bindings from the filename specified
 by this environment variable.
 .br
@@ -343,9 +522,12 @@ Default value: ${CALCBINDINGS}
 .SH CREDIT
 \&
 .br
-The majority of calc was written by David I. Bell.
+The majority of
+.B calc
+was written by David I. Bell.
 .sp
-Calc archives and calc-tester mailing list maintained by Landon Curt Noll.
+.B Calc
+archives and calc-tester mailing list maintained by Landon Curt Noll.
 .sp
 Thanks for suggestions and encouragement from Peter Miller,
 Neil Justusson, and Landon Noll.
@@ -378,30 +560,27 @@ Copyright (c) 19xx Ernest Bowen and Landon Curt Noll
 Permission is granted to use, distribute, or modify this source,
 provided that this copyright notice remains intact.
 .sp
-Send calc comments, suggestions, bug fixes, enhancements
-and interesting calc scripts that you would like you see included
+Send comments, suggestions, bug fixes, enhancements
+and interesting
+.B calc
+scripts that you would like you see included
 in future distributions to:
 .sp
 .in +0.5i
-dbell@auug.org.au
-.br
-chongo@toad.com
+calc-tester-request@postofc.corp.sgi.com
 .in -0.5i
 .sp
-Landon Noll maintains the official calc ftp archive at:
+Landon Noll maintains the the
+.B calc
+web site is located at:
 .sp
 .in +0.5i
-ftp://ftp.uu.net/pub/calc
+http://reality.sgi.com/chongo/calc
 .in -0.5i
 .sp
-Alpha test versions, complete with bugs, untested code and
-experimental features may be fetched (if you are brave) under:
-.sp
-.in +0.5i
-http://reality.sgi.com/chongo/calc/
-.in -0.5i
-.sp
-One may join the calc testing group by sending a request to:
+One may join the
+.B calc
+testing group by sending a request to:
 .sp
 .in +0.5i
 calc-tester-request@postofc.corp.sgi.com
@@ -410,14 +589,14 @@ calc-tester-request@postofc.corp.sgi.com
 Your message body (not the subject) should consist of:
 .sp
 .in +0.5i
+.nf
 subscribe calc-tester address
-.br
 end
-.br
 name your_full_name
+.fi
+.in -0.5i
 .sp
 where "address" is your EMail address and "your_full_name"
 is your full name.
-.in -0.5i
 .sp
-Enjoy!
+Share and Enjoy! :\-)

calc_errno.c

@@ -0,0 +1,123 @@
+/*
+ * errno - Determine how to declare errno, sys_errlist and sys_nerr
+ *
+ * On most machines: errno sys_errlist and sys_nerr are declared
+ * by either <stdio.h> and/or <errno.h>.  But some systems declare
+ * them somewhere else or do not declare them at all!
+ *
+ * If the system were doing a proper job in headers, this should declare them:
+ *
+ *	#include <stdio.h>
+ *	#include <errno.h>
+ *
+ * But one some systems one must explicitly declare them as:
+ *
+ *	extern int errno;
+ *	extern const char *const sys_errlist[];
+ *	extern int sys_nerr;
+ *
+ * and on some old systems they must be explicitly and incorrectly declared as:
+ *
+ *	extern int errno;
+ *	extern char *sys_errlist[];
+ *	extern int sys_nerr;
+ *
+ * The purpose of this utility is try and find the right way to declare
+ * them and to output the middle of a header file called calc_errno.h.
+ */
+
+/*
+ * Copyright (c) 1999 by Landon Curt Noll.  All Rights Reserved.
+ *
+ * Permission to use, copy, modify, and distribute this software and
+ * its documentation for any purpose and without fee is hereby granted,
+ * provided that the above copyright, this permission notice and text
+ * this comment, and the disclaimer below appear in all of the following:
+ *
+ *	supporting documentation
+ *	source copies
+ *	source works derived from this source
+ *	binaries derived from this source or from derived source
+ *
+ * LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
+ * EVENT SHALL LANDON CURT NOLL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ *
+ * chongo was here	/\../\
+ */
+
+#include <stdio.h>
+#if defined(TRY_ERRNO_NO_DECL)
+#  include <errno.h>
+#endif /* TRY_ERRNO_NO_DECL */
+
+int
+main(void)
+{
+
+#if defined(TRY_ERRNO_NO_DECL)
+	printf("/*\n");
+	printf(" * The following comments were produced by calc_errno\n");
+	printf(" * in an effort to see if these values were correctly\n");
+	printf(" * declared when calc_errno.c was compiled.\n");
+	printf(" */\n\n");
+	printf("/* Initially errno is %d */\n", errno);
+	printf("/* There are %d entries in sys_errlist[] */\n", sys_nerr);
+	printf("/* The 2nd sys_errlist entry is \"%s\" */\n\n", sys_errlist[1]);
+	printf("/*\n");
+	printf(" * Based on the above, calc_errno now knows\n");
+	printf(" * how to declare errno and friends.\n");
+	printf(" */\n\n");
+	printf("#include <stdio.h>\n");
+	printf("#include <errno.h>\n");
+#elif defined(TRY_ERRNO_OLD_DECL)
+	extern int errno;		/* last system error */
+	extern char *sys_errlist[];	/* system error messages */
+	extern int sys_nerr;		/* number of system errors*/
+
+	printf("/*\n");
+	printf(" * The following comments were produced by calc_errno\n");
+	printf(" * in an effort to see if these values were correctly\n");
+	printf(" * declared when calc_errno.c was compiled.\n");
+	printf(" */\n\n");
+	printf("/* Initially errno is %d */\n", errno);
+	printf("/* There are %d entries in sys_errlist[] */\n", sys_nerr);
+	printf("/* The 2nd sys_errlist entry is \"%s\" */\n\n", sys_errlist[1]);
+	printf("/*\n");
+	printf(" * Based on the above, calc_errno now knows\n");
+	printf(" * how to declare errno and friends.\n");
+	printf(" */\n\n");
+	printf("extern int errno;\t\t/* last system error */\n");
+	printf("extern char *sys_errlist[];\t"
+	       "/* system error messages */\n");
+	printf("extern int sys_nerr;\t\t/* number of system errors*/\n");
+#else	/* assume defined(TRY_ERRNO_STD_DECL) */
+	extern int errno;			/* last system error */
+	extern const char *const sys_errlist[];	/* system error messages */
+	extern int sys_nerr;			/* number of system errors*/
+
+	printf("/*\n");
+	printf(" * The following comments were produced by calc_errno\n");
+	printf(" * in an effort to see if these values were correctly\n");
+	printf(" * declared when calc_errno.c was compiled.\n");
+	printf(" */\n\n");
+	printf("/* Initially errno is %d */\n", errno);
+	printf("/* There are %d entries in sys_errlist[] */\n", sys_nerr);
+	printf("/* The 2nd sys_errlist entry is \"%s\" */\n\n", sys_errlist[1]);
+	printf("/*\n");
+	printf(" * Based on the above, calc_errno now knows\n");
+	printf(" * how to declare errno and friends.\n");
+	printf(" */\n\n");
+	printf("extern int errno;\t\t\t/* last system error */\n");
+	printf("extern const char *const sys_errlist[];\t"
+	       "/* system error messages */\n");
+	printf("extern int sys_nerr;\t\t\t/* number of system errors*/\n");
+#endif
+
+	/* exit(0); */
+	return 0;
+}

check.awk

@@ -71,5 +71,9 @@ END {
     if (error > 0 && havebuf0) {
 	print buf0;
     }
-    exit (error > 0);
+    if (error > 0) {
+	exit(1);
+    } else {
+	exit(0);
+    }
 }

codegen.c

@@ -81,8 +81,13 @@ static long getinitlist(void);
 void
 getcommands(BOOL toplevel)
 {
-	char name[PATHSIZE+1];	/* program name */
+	char name[MAXCMD+1+1];	/* program name */
 
+	/* firewall */
+	name[0] = '\0';
+	name[MAXCMD+1] = '\0';
+
+	/* getcommands */
 	if (!toplevel)
 		enterfilescope();
 	for (;;) {
@@ -256,6 +261,8 @@ getfunction(void)
 {
 	char *name;		/* parameter name */
 	int type;		/* type of token read */
+	LABEL label;
+	long index;
 
 	(void) tokenmode(TM_DEFAULT);
 	if (gettoken() != T_SYMBOL) {
@@ -271,9 +278,11 @@ getfunction(void)
 	beginfunc(name, FALSE);
 	enterfuncscope();
 	if (gettoken() != T_LEFTPAREN) {
-		scanerror(T_SEMICOLON, "Left parenthesis expected for function");
+		scanerror(T_SEMICOLON,
+			"Left parenthesis expected for function");
 		return;
 	}
+	index = 0;
 	for (;;) {
 		type = gettoken();
 		if (type == T_RIGHTPAREN)
@@ -287,12 +296,22 @@ getfunction(void)
 			case SYM_UNDEFINED:
 			case SYM_GLOBAL:
 			case SYM_STATIC:
-				(void) addparam(name);
+				index = addparam(name);
 				break;
 			default:
 				scanerror(T_NULL, "Parameter \"%s\" is already defined", name);
 		}
 		type = gettoken();
+		if (type == T_ASSIGN) {
+			clearlabel(&label);
+			addopone(OP_PARAMADDR, index);
+			addoplabel(OP_JUMPNN, &label);
+			getopassignment();
+			addop(OP_ASSIGNPOP);
+			setlabel(&label);
+			type = gettoken();
+		}
+
 		if (type == T_RIGHTPAREN)
 			break;
 		if (type != T_COMMA) {
@@ -593,25 +612,25 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 					scanerror(T_SEMICOLON, "CONTINUE not within FOR, WHILE, or DO");
 					return;
 				}
-				addoplabel(OP_JUMPNE, contlabel);
+				addoplabel(OP_JUMPNZ, contlabel);
 				break;
 			case T_BREAK:
 				if (breaklabel == NULL_LABEL) {
 					scanerror(T_SEMICOLON, "BREAK not within FOR, WHILE, or DO");
 					return;
 				}
-				addoplabel(OP_JUMPNE, breaklabel);
+				addoplabel(OP_JUMPNZ, breaklabel);
 				break;
 			case T_GOTO:
 				if (gettoken() != T_SYMBOL) {
 					scanerror(T_SEMICOLON, "Missing label in goto");
 					return;
 				}
-				addop(OP_JUMPNE);
+				addop(OP_JUMPNZ);
 				addlabel(tokensymbol());
 				break;
 			default:
-				addoplabel(OP_JUMPEQ, &label1);
+				addoplabel(OP_JUMPZ, &label1);
 				rescantoken();
 				getstatement(contlabel, breaklabel, NULL_LABEL, NULL_LABEL);
 				if (gettoken() != T_ELSE) {
@@ -662,7 +681,7 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 			contlabel = &label1;
 			rescantoken();
 			(void) getexprlist();
-			addoplabel(OP_JUMPNE, &label3);
+			addoplabel(OP_JUMPNZ, &label3);
 			addoplabel(OP_JUMP, breaklabel);
 			if (gettoken() != T_SEMICOLON) {
 				(void) tokenmode(oldmode);
@@ -703,7 +722,7 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 		clearlabel(breaklabel);
 		setlabel(contlabel);
 		getcondition();
-		addoplabel(OP_JUMPEQ, breaklabel);
+		addoplabel(OP_JUMPZ, breaklabel);
 		getstatement(contlabel, breaklabel, NULL_LABEL, NULL_LABEL);
 		addoplabel(OP_JUMP, contlabel);
 		setlabel(breaklabel);
@@ -726,7 +745,7 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 		}
 		setlabel(contlabel);
 		getcondition();
-		addoplabel(OP_JUMPNE, &label3);
+		addoplabel(OP_JUMPNZ, &label3);
 		setlabel(breaklabel);
 		(void) tokenmode(oldmode);
 		return;
@@ -810,6 +829,8 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 		printeol = TRUE;
 		for (;;) {
 			switch (gettoken()) {
+				case T_RIGHTPAREN:
+				case T_RIGHTBRACKET:
 				case T_RIGHTBRACE:
 				case T_NEWLINE:
 				case T_EOF:
@@ -1372,6 +1393,21 @@ getassignment (void)
 {
 	int type;		/* type of expression */
 
+	switch(gettoken()) {
+		case T_COMMA:
+		case T_SEMICOLON:
+		case T_NEWLINE:
+		case T_RIGHTPAREN:
+		case T_RIGHTBRACKET:
+		case T_RIGHTBRACE:
+		case T_EOF:
+			addop(OP_UNDEF);
+			rescantoken();
+			return EXPR_RVALUE;
+	}
+
+	rescantoken();
+
 	type = getaltcond();
 
 	switch (gettoken()) {
@@ -1436,7 +1472,7 @@ getaltcond(void)
 	}
 	clearlabel(&donelab);
 	clearlabel(&altlab);
-	addoplabel(OP_JUMPEQ, &altlab);
+	addoplabel(OP_JUMPZ, &altlab);
 	type = getaltcond();
 	if (gettoken() != T_COLON) {
 		scanerror(T_SEMICOLON, "Missing colon for conditional expression");

config.c

@@ -93,7 +93,7 @@ CONFIG oldstd = {	/* backward compatible standard configuration */
 	FALSE,			/* skip duplicate block output lines */
 	BLK_BASE_HEX,		/* block octet print base */
 	BLK_FMT_HD_STYLE,	/* block output format */
-	0,			/* calc library debug level */
+	3,			/* calc library debug level */
 	0,			/* internal calc debug level */
 	0 			/* user defined debug level */
 };
@@ -128,7 +128,7 @@ CONFIG newstd = {	/* new non-backward compatible configuration */
 	FALSE,			/* skip duplicate block output lines */
 	BLK_BASE_HEX,		/* block octet print base */
 	BLK_FMT_HD_STYLE,	/* block output format */
-	0,			/* calc library debug level */
+	3,			/* calc library debug level */
 	0,			/* internal calc debug level */
 	0 			/* user defined debug level */
 };
@@ -890,7 +890,7 @@ config_copy(CONFIG *src)
 	/*
 	 * copy over the values
 	 */
-	*dest = *src;
+	memcpy((void *)dest, (void *)src, sizeof(CONFIG));
 
 	/*
 	 * clone the pointer values

config.h

@@ -85,7 +85,7 @@
 
 
 /*
- * config defult symbols
+ * config default symbols
  */
 #define DISPLAY_DEFAULT 20	/* default digits for float display */
 #define EPSILON_DEFAULT "1e-20"	/* allowed error for float calculations */
@@ -95,8 +95,6 @@
 #define MAXPRINT_DEFAULT 16	/* default number of elements printed */
 #define MAXSCANCOUNT 20		/* default max scan errors before an abort */
 
-#define ERRMAX 20		/* default errmax value */
-
 
 /*
  * configuration object

const.c

@@ -27,10 +27,11 @@ initconstants(void)
 		math_error("Unable to allocate constant table");
 		/*NOTREACHED*/
 	}
-	for (i = 0; i < 8; i++)
+	for (i = 0; i < INITCONSTCOUNT; i++)
 		consttable[i] = initnumbs[i];
-	constcount = 8;
-	constavail = CONSTALLOCSIZE - 8;
+	consttable[INITCONSTCOUNT] = NULL;	/* firewall */
+	constcount = INITCONSTCOUNT;
+	constavail = CONSTALLOCSIZE - INITCONSTCOUNT;
 }
 
 
@@ -187,10 +188,9 @@ freeconstant(unsigned long index)
 void
 trimconstants(void)
 {
-	NUMBER **qp;
-
-	qp = &consttable[constcount];
-	while (constcount > 0 && (*--qp)->links == 0) {
+	while (constcount > 0 &&
+	       (consttable[constcount-1] == NULL ||
+		consttable[constcount-1]->links == 0)) {
 		constcount--;
 		constavail++;
 	}

custom/Makefile

@@ -41,13 +41,13 @@
 #
 # Put your custom calc library files here.
 #
-CUSTOM_CALC_FILES= argv.cal halflen.cal
+CUSTOM_CALC_FILES= argv.cal halflen.cal pzasusb8.cal
 
 # The custom help files to install
 #
 # Put your custom help files here.
 #
-CUSTOM_HELP= argv devnull help sysinfo
+CUSTOM_HELP= argv devnull help sysinfo pzasusb8
 
 # Any .h files that are needed by programs that use libcustcalc.a
 #
@@ -63,7 +63,7 @@ CUSTOM_H_SRC=
 #
 # Put your custom .c files here.
 #
-CUSTOM_SRC= c_argv.c c_devnull.c c_help.c c_sysinfo.c
+CUSTOM_SRC= c_argv.c c_devnull.c c_help.c c_sysinfo.c c_pzasusb8.c
 
 # Any .o files that are needed by program that use libcustcalc.a.
 # Don't put ${REQUIRED_OBJ} files in this list.
@@ -72,7 +72,7 @@ CUSTOM_SRC= c_argv.c c_devnull.c c_help.c c_sysinfo.c
 #
 # Put your custom .o files here.
 #
-CUSTOM_OBJ= c_argv.o c_devnull.o c_help.o c_sysinfo.o
+CUSTOM_OBJ= c_argv.o c_devnull.o c_help.o c_sysinfo.o c_pzasusb8.o
 
 ##############################################################################
 #-=-=-=-=-=-=- Defaults in case you want to build from this dir -=-=-=-=-=-=-#
@@ -590,6 +590,11 @@ c_help.o: ../string.h
 c_help.o: ../value.h
 c_help.o: ../zmath.h
 c_help.o: c_help.c
+c_pzasusb8.o: ../custom.h
+c_pzasusb8.o: ../have_const.h
+c_pzasusb8.o: ../value.h
+c_pzasusb8.o: ../zmath.h
+c_pzasusb8.o: c_pzasusb8.c
 c_sysinfo.o: ../alloc.h
 c_sysinfo.o: ../block.h
 c_sysinfo.o: ../byteswap.h

custom/c_pzasusb8.c

@@ -0,0 +1,70 @@
+/*
+ * Permission to use, copy, modify, and distribute this software and
+ * its documentation for any purpose and without fee is hereby granted.
+ *
+ *            Ernest Bowen, following Landon Curt Noll
+ */
+
+#if defined(CUSTOM)
+
+#include <stdio.h>
+
+#include "../have_const.h"
+#include "../value.h"
+#include "../custom.h"
+#include "../zmath.h"
+
+/*
+ * c_pzasusb8 - print numereator of real as if its array of HALFs were
+ *    a string of USB8s
+ *
+ * given:
+ *    count = 1;
+ *    vals[0]   real number;
+ *
+ * returns:
+ *    null
+ */
+/*ARGSUSED*/
+VALUE
+c_pzasusb8(char *name, int count, VALUE **vals)
+{
+	VALUE result;           /* what we will return */
+	ZVALUE z;		/* numerator of the value */
+	long half_cnt;		/* number of HALFs in the numerator */
+	USB8 *h;		/* octet pointer */
+	long half_len;		/* length of a half in octets */
+	long i;
+	long j;
+
+	/*
+	 * arg check
+	 */
+	result.v_type = V_NULL;
+	if (vals[0]->v_type != V_NUM) {
+		math_error("Non-real argument for pzasusb8");
+		/*NOTREACHED*/
+	}
+
+	/*
+	 * look at the numerator
+	 */
+	z = vals[0]->v_num->num;
+	half_len = sizeof(HALF);
+	half_cnt = z.len;
+
+	/*
+	 * print the octets
+	 */
+	h = (USB8 *) z.v;
+	for (i=0; i < half_cnt; ++i) {
+		printf("%ld:\t", i);
+		for (j=0; j < half_len; ++j) {
+			printf("%02x", (int)(*h++));
+		}
+		putchar('\n');
+	}
+	return result;
+}
+
+#endif /* CUSTOM */

custom/c_sysinfo.c

@@ -99,6 +99,7 @@ static struct infoname sys_info[] = {
     {"LONGLONG_BITS", "length of a long long, or 0", NULL, (FULL)LONGLONG_BITS},
     {"LONG_BITS", "bit length of a long", NULL, (FULL)LONG_BITS},
     {"MAP_POPCNT", "number of odd primes in pr_map", NULL, (FULL)MAP_POPCNT},
+    {"MAX_CALCRC", "maximum allowed length of $CALCRC", NULL, (FULL)MAX_CALCRC},
     {"MAXCMD", "max length of command invocation", NULL, (FULL)MAXCMD},
     {"MAXDIM", "max number of dimensions in matrices", NULL, (FULL)MAXDIM},
     {"MAXERROR", "max length of error message string", NULL, (FULL)MAXERROR},
@@ -128,8 +129,6 @@ static struct infoname sys_info[] = {
     {"NXT_MAP_PRIME", "smallest odd prime not in pr_map", NULL, (FULL)NXT_MAP_PRIME},
     {"NXT_PFACT_VAL", "next prime for higher pfact values", NULL, (FULL)NXT_PFACT_VAL},
     {"OFF_T_BITS", "file offset size in bits", NULL, (FULL)OFF_T_BITS},
-    {"PATHSIZE", "max length of path name", NULL, (FULL)PATHSIZE},
-    {"PATHSIZE", "max length of path name", NULL, (FULL)PATHSIZE},
     {"PIX_32B", "max pix() value", NULL, (FULL)PIX_32B},
     {"POW_ALG2", "default size for using REDC for powers", NULL, (FULL)POW_ALG2},
     {"REDC_ALG2", "default size using alternative REDC alg", NULL, (FULL)REDC_ALG2},
@@ -238,9 +237,10 @@ c_sysinfo(char *name, int count, VALUE **vals)
 	} else if (vals[0]->v_type == V_STR) {
 
 		/* convert vals[0] to upper case string */
-		buf = (char *)malloc(strlen((char *)vals[0]->v_str)+1);
-		for (q = (char *)vals[0]->v_str, r = buf; *q; ++q, ++r) {
-			if (isascii(*q) && islower(*q)) {
+		buf = (char *)malloc(strlen((char *)vals[0]->v_str->s_str)+1);
+		for (q = (char *)vals[0]->v_str->s_str, r = buf; *q; ++q, ++r)
+		{
+			if (isascii((int)*q) && islower((int)*q)) {
 				*r = *q - 'a' + 'A';
 			} else {
 				*r = *q;
@@ -262,7 +262,7 @@ c_sysinfo(char *name, int count, VALUE **vals)
 					/* return value as string */
 					result.v_type = V_STR;
 					result.v_subtype = V_NOSUBTYPE;
-					result.v_str = (STRING *)p->str;
+					result.v_str = makestring(p->str);
 				}
 
 				/* return found infotype as value */

custom/custtbl.c

@@ -59,6 +59,7 @@ extern VALUE c_argv(char*, int, VALUE**);
 extern VALUE c_devnull(char*, int, VALUE**);
 extern VALUE c_help(char*, int, VALUE**);
 extern VALUE c_sysinfo(char*, int, VALUE**);
+extern VALUE c_pzasusb8(char*, int, VALUE**);
 
 
 #endif /* CUSTOM */
@@ -108,6 +109,9 @@ CONST struct custom cust[] = {
 	{ "sysinfo", "return a calc #define value",
 	 0, 1, c_sysinfo },
 
+	{ "pzasusb8", "print ZCALUE as USB8",
+	 0, 1, c_pzasusb8 },
+
 
 #endif /* CUSTOM */
 

custom/pzasusb8

@@ -0,0 +1,50 @@
+NAME
+    pzasusb8 - print a number in hex octets
+
+SYNOPSIS
+    custom("pzasusb8", arg)
+
+TYPES
+    arg		real
+
+    return	null
+
+DESCRIPTION
+    This custom function prints out the numerator of a real value
+    in octets.  Each HALF value is printed in a separate line.
+
+    NOTE: The output will vary depending on the size of a HALF
+	  and the byte order of the system.  See:
+
+		custom("sysinfo", "BASEB")
+		custom("sysinfo", "CALC_BYTE_ORDER")
+
+    foe details.
+
+    This custom function is intented for testing of the general
+    custom interface.
+
+EXAMPLE
+    > custom("pzasusb8", 0x01020304050607080910111213141516);
+    0:      13141516
+    1:      09101112
+    2:      05060708
+    3:      01020304
+
+    > custom("pzasusb8", 10^25)
+    0:      4a000000
+    1:      16140148
+    2:      00084595
+
+    > printf("%x\n", 10^25);
+    0x84595161401484a000000
+
+LIMITS
+    calc must be built with ALLOW_CUSTOM= -DCUSTOM
+    calc must be executed with a -C arg.
+
+LIBRARY
+    none
+
+SEE ALSO
+    custom

custom/pzasusb8.cal

@@ -0,0 +1,29 @@
+/*
+ * Permission to use, copy, modify, and distribute this software and
+ * its documentation for any purpose and without fee is hereby granted.
+ *
+ *	Ernest Bowen, following Landon Curt Noll
+ */
+
+print "p(n) prints array in which numerator of n is stored as a";
+print "sequence of 2-hex-digits representing unsigned characters.";
+print "h(n) printx n in hex notation.  This should be the same as";
+print "p(n) except for (1) its leading 0x, (2) possible trailing zeros";
+print "in p(n), and (3) the order of the hex-digit pairs.";
+print "The following example show results for n = isqrt(2e100).";
+print "";
+
+define p(n) {custom("pzasusb8", n); print;}
+define h(n) = printf("%x\n", n);
+
+n = isqrt(2e100);
+print "";
+p(n);
+h(n);
+print "";
+print "BASEB: ", custom("sysinfo", "BASEB");
+print "CALC_BYTE_ORDER: ", custom("sysinfo", "CALC_BYTE_ORDER");
+print "BIG_ENDIAN: ", custom("sysinfo", "BIG_ENDIAN");
+print "LITTLE_ENDIAN: ", custom("sysinfo", "LITTLE_ENDIAN");
+print "LONG_BITS: ", custom("sysinfo", "LONG_BITS");
+print "LONGLONG_BITS: ", custom("sysinfo", "LONGLONG_BITS");

endian.c

@@ -39,41 +39,42 @@
 char byte[8] = { (char)0x12, (char)0x36, (char)0x48, (char)0x59,
 		 (char)0x01, (char)0x23, (char)0x45, (char)0x67 };
 
-MAIN
+int
 main(void)
 {
-    /* pointers into the byte order array */
-    int *intp = (int *)byte;
+	/* pointers into the byte order array */
+	int *intp = (int *)byte;
 #if defined(DEBUG)
-    short *shortp = (short *)byte;
-    long *longp = (long *)byte;
+	short *shortp = (short *)byte;
+	long *longp = (long *)byte;
 
-    printf("byte: %02x %02x %02x %02x %02x %02x %02x %02x\n",
-	byte[0], byte[1], byte[2], byte[3],
-	byte[4], byte[5], byte[6], byte[7]);
-    printf("short: %04x %04x %04x %04x\n",
-	shortp[0], shortp[1], shortp[2], shortp[3]);
-    printf("int: %08x %08x\n",
-	intp[0], intp[1]);
-    printf("long: %08x %08x\n",
-	longp[0], longp[1]);
+	printf("byte: %02x %02x %02x %02x %02x %02x %02x %02x\n",
+	    byte[0], byte[1], byte[2], byte[3],
+	    byte[4], byte[5], byte[6], byte[7]);
+	printf("short: %04x %04x %04x %04x\n",
+	    shortp[0], shortp[1], shortp[2], shortp[3]);
+	printf("int: %08x %08x\n",
+	    intp[0], intp[1]);
+	printf("long: %08x %08x\n",
+	    longp[0], longp[1]);
 #endif
 
-    /* Print the standard <machine/endian.h> defines */
-    printf("#define BIG_ENDIAN\t4321\n");
-    printf("#define LITTLE_ENDIAN\t1234\n");
+	/* Print the standard <machine/endian.h> defines */
+	printf("#define BIG_ENDIAN\t4321\n");
+	printf("#define LITTLE_ENDIAN\t1234\n");
 
-    /* Determine byte order */
-    if (intp[0] == 0x12364859) {
-	/* Most Significant Byte first */
-	printf("#define CALC_BYTE_ORDER\tBIG_ENDIAN\n");
-    } else if (intp[0] == 0x59483612) {
-	/* Least Significant Byte first */
-	printf("#define CALC_BYTE_ORDER\tLITTLE_ENDIAN\n");
-    } else {
-	fprintf(stderr,
-	    "Unknown int Byte Order, set CALC_BYTE_ORDER in Makefile\n");
-	exit(1);
-    }
-    exit(0);
+	/* Determine byte order */
+	if (intp[0] == 0x12364859) {
+	    /* Most Significant Byte first */
+	    printf("#define CALC_BYTE_ORDER\tBIG_ENDIAN\n");
+	} else if (intp[0] == 0x59483612) {
+	    /* Least Significant Byte first */
+	    printf("#define CALC_BYTE_ORDER\tLITTLE_ENDIAN\n");
+	} else {
+	    fprintf(stderr,
+		"Unknown int Byte Order, set CALC_BYTE_ORDER in Makefile\n");
+	    exit(1);
+	}
+	/* exit(0); */
+	return 0;
 }

file.c

@@ -1141,6 +1141,7 @@ rewindall(void)
  *
  * NOTE: Does not support negative file positions.
  */
+/*ARGSUSED*/
 static ZVALUE
 filepos2z(FILEPOS pos)
 {
@@ -1493,6 +1494,7 @@ setloc(FILEID id, ZVALUE zpos)
  * returns:
  *	file size as a ZVALUE
  */
+/*ARGSUSED*/
 static ZVALUE
 off_t2z(off_t siz)
 {
@@ -1555,6 +1557,7 @@ dev2z(dev_t dev)
  * returns:
  *	file size as a ZVALUE
  */
+/*ARGSUSED*/
 static ZVALUE
 inode2z(ino_t inode)
 {
@@ -1841,7 +1844,8 @@ getscanfield(FILE *fp, BOOL skip, unsigned int width, int scannum, char *scanptr
 			if (c == EOF || c == '\0')
 				break;
 			chnum++;
-			if(scannum && (memchr(scanptr,c,scannum)==NULL) ^ comp)
+			if(scannum &&
+			   ((memchr(scanptr,c,scannum)==NULL) ^ comp))
 				break;
 			if (!skip) {
 				*b++ = c;
@@ -1918,7 +1922,7 @@ getscanwhite(FILE *fp, BOOL skip, unsigned int width, int scannum, char **strptr
 			if (c == EOF || c == '\0')
 				break;
 			chnum++;
-			if(scannum && !isspace(c) ^ comp)
+			if(scannum && (!isspace(c) ^ comp))
 				break;
 			if (!skip) {
 				*b++ = c;
@@ -1980,11 +1984,11 @@ fscanfile(FILE *fp, char *fmt, int count, VALUE **vals)
 	for (;;) {
 		for (;;) {
 			f = *fmt++;
-			if (isspace(f)) {
+			if (isspace((int)f)) {
 				getscanwhite(fp,1,0,6,NULL);
 				do {
 					f = *fmt++;
-				} while (isspace(f));
+				} while (isspace((int)f));
 			}
 			c = fgetc(fp);
 			if (c == EOF)
@@ -2267,6 +2271,7 @@ freadnum(FILE *fp, VALUE *valptr)
 			num = newnum;
 			zden = newden;
 		}
+		zfree(div);
 	}
 	q = qalloc();
 	q->num = num;

fposval.c

@@ -60,7 +60,7 @@
 
 char *program;			/* our name */
 
-MAIN
+int
 main(int argc, char **argv)
 {
 	int stsizelen;		/* bit length of st_size in buf */
@@ -225,5 +225,6 @@ main(int argc, char **argv)
 	printf("#define SWAP_HALF_IN_INODE(dest, src)\t%s%d%s\n",
 	    "memcpy((void *)(dest), (void *)(src), sizeof(",inodelen,"))");
 #endif /* CALC_BYTE_ORDER == BIG_ENDIAN */
-	exit(0);
+	/* exit(0); */
+	return 0;
 }

func.c

@@ -13,11 +13,12 @@
 
 #if defined(FUNCLIST)
 
-#include <stdio.h>
 #define CONST /* disabled for FUNCLIST in case NATIVE_CC doesn't have it */
 
 #else /* FUNCLIST */
 
+#include "calc_errno.h"
+
 #include "have_unistd.h"
 #if defined(HAVE_UNISTD_H)
 #include <unistd.h>
@@ -77,15 +78,14 @@ static VALUE f_fsize(VALUE *vp);
 /*
  * external declarations
  */
-extern int errno;				/* last system error */
-extern char *sys_errlist[];			/* system error messages */
-extern int sys_nerr;				/* number of system errors */
 extern char cmdbuf[];				/* command line expression */
 extern CONST char *error_table[E__COUNT+2];	/* calc coded error messages */
 extern void matrandperm(MATRIX *M);
 extern void listrandperm(LIST *lp);
 extern int idungetc(FILEID id, int ch);
 
+extern int stoponerror;
+
 
 /*
  * if HZ & CLK_TCK are not defined, pick typical values, hope for the best
@@ -211,6 +211,28 @@ f_prompt(VALUE *vp)
 }
 
 
+static VALUE
+f_display(int count, VALUE **vals)
+{
+	long oldvalue;
+	VALUE res;
+
+	oldvalue = conf->outdigits;
+
+	if (count > 0) {
+		if (vals[0]->v_type != V_NUM || qisfrac(vals[0]->v_num) ||
+			qisneg(vals[0]->v_num) || zge31b(vals[0]->v_num->num))
+			fprintf(stderr,
+				 "Out-of-range arg for display ignored\n");
+		else
+			conf->outdigits = qtoi(vals[0]->v_num);
+	}
+	res.v_type = V_NUM;
+	res.v_num = itoq(oldvalue);
+	return res;
+}
+
+
 /*ARGSUSED*/
 static VALUE
 f_null(int count, VALUE **vals)
@@ -232,33 +254,34 @@ f_str(VALUE *vp)
 	switch (vp->v_type) {
 		case V_STR:
 			result.v_str = stringcopy(vp->v_str);
-			return result;
+			break;
 		case V_NULL:
 			result.v_str = slink(&_nullstring_);
-			return result;
+			break;
 		case V_OCTET:
 			result.v_str = charstring(*vp->v_octet);
-			return result;
+			break;
 		case V_NUM:
 			math_divertio();
 			qprintnum(vp->v_num, MODE_DEFAULT);
 			cp = math_getdivertedio();
+			result.v_str = makestring(cp);
 			break;
 		case V_COM:
 			math_divertio();
 			comprint(vp->v_com);
 			cp = math_getdivertedio();
+			result.v_str = makestring(cp);
 			break;
 		default:
 			return error_value(E_STR);
 	}
-	result.v_str = makestring(cp);
 	return result;
 }
 
 
 static VALUE
-f_name (VALUE *vp)
+f_name(VALUE *vp)
 {
 	VALUE result;
 	char *cp;
@@ -769,6 +792,13 @@ f_nextcand(int count, NUMBER **vals)
 }
 
 
+static NUMBER *
+f_seed(void)
+{
+	return pseudo_seed();
+}
+
+
 static NUMBER *
 f_rand(int count, NUMBER **vals)
 {
@@ -1244,6 +1274,7 @@ minlistitems(LIST *lp)
 	VALUE min;
 
 	min.v_type = V_NULL;
+	term.v_type = V_NULL;
 
 	for (ep = lp->l_first; ep; ep = ep->e_next) {
 		vp = &ep->e_value;
@@ -1293,6 +1324,7 @@ maxlistitems(LIST *lp)
 	VALUE max;
 
 	max.v_type = V_NULL;
+	term.v_type = V_NULL;
 
 	for (ep = lp->l_first; ep; ep = ep->e_next) {
 		vp = &ep->e_value;
@@ -1341,6 +1373,8 @@ f_min(int count, VALUE **vals)
 	VALUE rel;
 
 	min.v_type = V_NULL;
+	term.v_type = V_NULL;
+
 	while (count-- > 0) {
 		vp = *vals++;
 		switch(vp->v_type) {
@@ -1392,6 +1426,7 @@ f_max(int count, VALUE **vals)
 	VALUE rel;
 
 	max.v_type = V_NULL;
+	term.v_type = V_NULL;
 
 	while (count-- > 0) {
 		vp = *vals++;
@@ -1496,6 +1531,7 @@ sumlistitems(LIST *lp)
 	VALUE sum;
 
 	sum.v_type = V_NULL;
+	term.v_type = V_NULL;
 
 	for (ep = lp->l_first; ep; ep = ep->e_next) {
 		vp = &ep->e_value;
@@ -1536,6 +1572,8 @@ f_sum(int count, VALUE **vals)
 	VALUE *vp;
 
 	sum.v_type = V_NULL;
+	term.v_type = V_NULL;
+
 	while (count-- > 0) {
 		vp = *vals++;
 		switch(vp->v_type) {
@@ -4378,11 +4416,7 @@ f_errno(int count, VALUE **vals)
 			math_error("errno argument out of range");
 			/*NOTREACHED*/
 		}
-		newerr = z1tol(vp->v_num->num);
-		if (newerr >= 32768) {
-			math_error("errno argument out of range");
-			/*NOTREACHED*/
-		}
+		newerr = (int) ztoi(vp->v_num->num);
 	}
 	olderr = set_errno(newerr);
 
@@ -4409,7 +4443,7 @@ f_errcount(int count, VALUE **vals)
 			math_error("errcount argument out of range");
 			/*NOTREACHED*/
 		}
-		newcount = z1tol(vp->v_num->num);
+		newcount = (int) ztoi(vp->v_num->num);
 	}
 	oldcount = set_errcount(newcount);
 
@@ -4422,23 +4456,21 @@ f_errcount(int count, VALUE **vals)
 static VALUE
 f_errmax(int count, VALUE **vals)
 {
-	int newmax, oldmax;
+	int oldmax;
 	VALUE *vp;
 	VALUE result;
 
-	newmax = -1;
+	oldmax = errmax;
 	if (count > 0) {
 		vp = vals[0];
 
-		/* arg must be an integer */
 		if (vp->v_type != V_NUM || qisfrac(vp->v_num) ||
-		qisneg(vp->v_num) || zge31b(vp->v_num->num)) {
-			math_error("errcount argument out of range");
-			/*NOTREACHED*/
-		}
-		newmax = z1tol(vp->v_num->num);
+				zge31b(vp->v_num->num))
+			fprintf(stderr,
+				 "Out-of-range arg for errmax ignored\n");
+		else
+			errmax = (int) ztoi(vp->v_num->num);
 	}
-	oldmax = set_errmax(newmax);
 
 	result.v_type = V_NUM;
 	result.v_num = itoq((long) oldmax);
@@ -4446,6 +4478,30 @@ f_errmax(int count, VALUE **vals)
 }
 
 
+static VALUE
+f_stoponerror(int count, VALUE **vals)
+{
+	int oldval;
+	VALUE *vp;
+	VALUE result;
+
+	oldval = stoponerror;
+	if (count > 0) {
+		vp = vals[0];
+
+		if (vp->v_type != V_NUM || qisfrac(vp->v_num) ||
+				zge31b(vp->v_num->num))
+			fprintf(stderr,
+				 "Out-of-range arg for stoponerror ignored\n");
+		else
+			stoponerror = (int) ztoi(vp->v_num->num);
+	}
+
+	result.v_type = V_NUM;
+	result.v_num = itoq((long) oldval);
+	return result;
+}
+
 static VALUE
 f_fclose(int count, VALUE **vals)
 {
@@ -4838,14 +4894,14 @@ strscan(char *s, int count, VALUE **vals)
 	while (*s != '\0') {
 		s--;
 		while ((ch = *++s)) {
-			if (!isspace(ch))
+			if (!isspace((int)ch))
 				break;
 		}
 		if (ch == '\0' || count-- == 0)
 			return n;
 		s0 = s;
 		while ((ch = *++s)) {
-			if (isspace(ch))
+			if (isspace((int)ch))
 				break;
 		}
 		chtmp = ch;
@@ -5171,11 +5227,14 @@ f_strprintf(int count, VALUE **vals)
 	math_divertio();
 	i = idprintf(FILEID_STDOUT, vals[0]->v_str->s_str,
 		 count - 1, vals + 1);
-	if (i)
+	if (i) {
+		free(math_getdivertedio());
 		return error_value(E_STRPRINTF2);
+	}
 	cp = math_getdivertedio();
 	result.v_type = V_STR;
 	result.v_str = makenewstring(cp);
+	free(cp);
 	return result;
 }
 
@@ -5919,6 +5978,7 @@ f_putenv(int count, VALUE **vals)
 	/* return putenv result */
 	result.v_type = V_NUM;
 	result.v_num = itoq((long) putenv(putenv_str));
+	free(putenv_str);
 	return result;
 }
 
@@ -6788,6 +6848,8 @@ static CONST struct builtin builtins[] = {
 	 "digit at specified decimal place of number"},
 	{"digits", 1, 1, 0, OP_NOP, f_digits, 0,
 	 "number of digits in number"},
+	{"display", 0, 1, 0, OP_NOP, 0, f_display,
+	 "number of decimal digits for displaying numbers"},
 	{"dp", 2, 2, 0, OP_NOP, 0, f_dp,
 	 "dot product of two vectors"},
 	{"epsilon", 0, 1, 0, OP_SETEPSILON, 0, 0,
@@ -7138,6 +7200,8 @@ static CONST struct builtin builtins[] = {
 	 "sec of a within accuracy b"},
 	{"sech", 1, 2, 0, OP_NOP, 0, f_sech,
 	 "hyperbolic secant of a within accuracy b"},
+	{"seed", 0, 0, 0, OP_NOP, f_seed, 0,
+	 "return a 64 bit seed for a psuedo-random generator"},
 	{"segment", 2, 3, 0, OP_NOP, 0, f_segment,
 	 "specified segment of specified list"},
 	{"select", 2, 2, 0, OP_NOP, 0, f_select,
@@ -7168,6 +7232,8 @@ static CONST struct builtin builtins[] = {
 	 "seed the random() function"},
 	{"ssq", 1, IN, 0, OP_NOP, 0, f_ssq,
 	 "sum of squares of values"},
+	{"stoponerror", 0, 1, 0, OP_NOP, 0, f_stoponerror,
+	 "assign value to stoponerror flag"},
 	{"str", 1, 1, 0, OP_NOP, 0, f_str,
 	 "simple value converted to string"},
 	{"strcat", 1,IN, 0, OP_NOP, 0, f_strcat,

hash.c

@@ -147,13 +147,13 @@ hash_free(HASH *state)
 HASH *
 hash_copy(HASH *state)
 {
-	HASH *new;		/* copy of state */
+	HASH *hnew;		/* copy of state */
 
 	/*
 	 * malloc new state
 	 */
-	new = (HASH *)malloc(sizeof(HASH));
-	if (new == NULL) {
+	hnew = (HASH *)malloc(sizeof(HASH));
+	if (hnew == NULL) {
 		math_error("hash_init: cannot malloc HASH");
 		/*NOTREACHED*/
 	}
@@ -161,8 +161,8 @@ hash_copy(HASH *state)
 	/*
 	 * duplicate state
 	 */
-	memcpy((void *)new, (void *)state, sizeof(HASH));
-	return new;
+	memcpy((void *)hnew, (void *)state, sizeof(HASH));
+	return hnew;
 }
 
 
@@ -391,8 +391,8 @@ hash_zvalue(int type, ZVALUE zval, HASH *state)
 	 */
 	if (zval.len > full_lim) {
 		for (j=0; j < zval.len-full_lim-1; j += 2) {
-			half[j] = zval.v[full_lim+i+1];
-			half[j+1] = zval.v[full_lim+i];
+			half[j] = zval.v[full_lim+j+1];
+			half[j+1] = zval.v[full_lim+j];
 		}
 		if (j < zval.len-full_lim) {
 			half[j] = (HALF)0;
@@ -562,7 +562,7 @@ hash_complex(int type, void *c, HASH *state)
 
 
 /*
- * hash_str - hash a string
+ * hash_str - hash a null-terminated string
  *
  * given:
  *	type	- hash type (see hash.h)
@@ -606,6 +606,47 @@ hash_str(int type, char *str, HASH *state)
 }
 
 
+/*
+ * hash_STR - hash a STRING
+ *
+ * given:
+ *	type	- hash type (see hash.h)
+ *	str	- the STRING
+ *	state	- the state to hash or NULL
+ *
+ * returns:
+ *	the new state
+ */
+HASH *
+hash_STR(int type, STRING *str, HASH *state)
+{
+	/*
+	 * initialize if state is NULL
+	 */
+	if (state == NULL) {
+		state = hash_init(type, NULL);
+	}
+
+	/*
+	 * setup for the string hash
+	 */
+	if (!state->bytes) {
+		(state->chkpt)(state);
+		state->bytes = TRUE;
+	}
+
+	/*
+	 * hash the string
+	 */
+	(state->update)(state, (USB8*) str->s_str, (USB32) str->s_len);
+
+	/*
+	 * all done
+	 */
+	return state;
+}
+
+
 /*
  * hash_usb8 - hash an array of USB8s
  *
@@ -720,7 +761,7 @@ hash_value(int type, void *v, HASH *state)
 		/* strings have no setup */
 
 		/* hash this type */
-		state = hash_str(type, value->v_str->s_str, state);
+		state = hash_STR(type, value->v_str, state);
 		break;
 
 	case V_MAT:

have_const.c

@@ -42,7 +42,7 @@
 
 #include <stdio.h>
 
-MAIN
+int
 main(void)
 {
 #if defined(HAVE_NO_CONST)
@@ -56,5 +56,6 @@ main(void)
 	printf("#undef CONST\n");
 	printf("#define CONST %s /* yes */\n", str);
 #endif /* HAVE_NO_CONST */
-	exit(0);
+	/* exit(0); */
+	return 0;
 }

have_fpos.c

@@ -32,22 +32,23 @@
 
 #include <stdio.h>
 
-MAIN
+int
 main(void)
 {
 #if !defined(HAVE_NO_FPOS)
-    fpos_t pos;		/* file position */
+	fpos_t pos;		/* file position */
 
-    /* get the current position */
-    (void) fgetpos(stdin, &pos);
+	/* get the current position */
+	(void) fgetpos(stdin, &pos);
 
-    /* set the current position */
-    (void) fsetpos(stdin, &pos);
+	/* set the current position */
+	(void) fsetpos(stdin, &pos);
 
-    /* print a have_fpos.h body that says we have the functions */
-    printf("#undef HAVE_FPOS\n");
-    printf("#define HAVE_FPOS 1  /* yes */\n\n");
-    printf("typedef fpos_t FILEPOS;\n");
+	/* print a have_fpos.h body that says we have the functions */
+	printf("#undef HAVE_FPOS\n");
+	printf("#define HAVE_FPOS 1  /* yes */\n\n");
+	printf("typedef fpos_t FILEPOS;\n");
 #endif
-    exit(0);
+	/* exit(0); */
+	return 0;
 }

have_memmv.c

@@ -44,7 +44,7 @@
 char src[] = "chongo was here";
 char dest[MOVELEN+1];
 
-MAIN
+int
 main(void)
 {
 #if defined(HAVE_NO_MEMMOVE)
@@ -54,5 +54,6 @@ main(void)
 
 	printf("#define HAVE_MEMMOVE /* yes */\n");
 #endif /* HAVE_NO_MEMMOVE */
-	exit(0);
+	/* exit(0); */
+	return 0;
 }

have_newstr.c

@@ -46,7 +46,7 @@
 char src[] = "chongo was here";
 char dest[MOVELEN+1];
 
-MAIN
+int
 main(void)
 {
 #if defined(HAVE_NO_NEWSTR)
@@ -58,5 +58,6 @@ main(void)
 
 	printf("#define HAVE_NEWSTR /* yes */\n");
 #endif /* HAVE_NO_NEWSTR */
-	exit(0);
+	/* exit(0); */
+	return 0;
 }

have_offscl.c

@@ -45,7 +45,7 @@
 #include <sys/types.h>
 #include <sys/stat.h>
 
-MAIN
+int
 main(void)
 {
 #if !defined(OFF_T_NON_SCALAR)
@@ -79,5 +79,6 @@ main(void)
 #else
 	printf("#undef HAVE_OFF_T_SCALAR /* off_t is not a simple value */\n");
 #endif
-	exit(0);
+	/* exit(0); */
+	return 0;
 }

have_posscl.c

@@ -46,7 +46,7 @@
 #include <sys/stat.h>
 #include "have_fpos.h"
 
-MAIN
+int
 main(void)
 {
 #if !defined(FILEPOS_NON_SCALAR)
@@ -80,5 +80,6 @@ main(void)
 #else
 	printf("#undef HAVE_FILEPOS_SCALAR /* FILEPOS is not a simple value */\n");
 #endif
-	exit(0);
+	/* exit(0); */
+	return 0;
 }

have_stdvs.c

@@ -54,86 +54,88 @@ char buf[BUFSIZ];
 
 
 void
-try(char *fmt, ...)
+try_this(char *fmt, ...)
 {
-    va_list ap;
+	va_list ap;
 
-    va_start(ap, fmt);
+	va_start(ap, fmt);
 #if !defined(DONT_HAVE_VSPRINTF)
-    vsprintf(buf, fmt, ap);
+	vsprintf(buf, fmt, ap);
 #else
-    sprintf(buf, fmt, ap);
+	sprintf(buf, fmt, ap);
 #endif
-    va_end(ap);
+	va_end(ap);
 }
 
 
-MAIN
+int
 main(void)
 {
-    /*
-     * setup
-     */
-    buf[0] = '\0';
+	/*
+	 * setup
+	 */
+	buf[0] = '\0';
 
-    /*
-     * test variable args and vsprintf/sprintf
-     */
-    try("@%d:%s:%d@", 1, "hi", 2);
-    if (strcmp(buf, "@1:hi:2@") != 0) {
+	/*
+	 * test variable args and vsprintf/sprintf
+	 */
+	try_this("@%d:%s:%d@", 1, "hi", 2);
+	if (strcmp(buf, "@1:hi:2@") != 0) {
 #if !defined(DONT_HAVE_VSPRINTF)
-	/* <stdarg.h> with vsprintf() didn't work */
+	    /* <stdarg.h> with vsprintf() didn't work */
 #else
-	/* <stdarg.h> with sprintf() simulating vsprintf() didn't work */
+	    /* <stdarg.h> with sprintf() simulating vsprintf() didn't work */
 #endif
-	exit(1);
-    }
-    try("%s %d%s%d%d %s",
-	"Landon Noll 1st proved that", 2, "^", 23209, -1, "was prime");
-    if (strcmp(buf, "Landon Noll 1st proved that 2^23209-1 was prime") != 0) {
+	    exit(1);
+	}
+	try_this("%s %d%s%d%d %s",
+	    "Landon Noll 1st proved that", 2, "^", 23209, -1, "was prime");
+	if (strcmp(buf,
+		   "Landon Noll 1st proved that 2^23209-1 was prime") != 0) {
 #if !defined(DONT_HAVE_VSPRINTF)
-	/* <stdarg.h> with vsprintf() didn't work */
+	    /* <stdarg.h> with vsprintf() didn't work */
 #else
-	/* <stdarg.h> with sprintf() simulating vsprintf() didn't work */
+	    /* <stdarg.h> with sprintf() simulating vsprintf() didn't work */
 #endif
-	exit(1);
-    }
+	    exit(1);
+	}
 
-    /*
-     * report the result
-     */
-    puts("/* what type of variable args do we have? */");
+	/*
+	 * report the result
+	 */
+	puts("/* what type of variable args do we have? */");
 #if defined(DONT_HAVE_VSPRINTF)
-    puts("/*");
-    puts(" * SIMULATE_STDARG");
-    puts(" *");
-    puts(" * WARNING: This type of stdarg makes assumptions about the stack");
-    puts(" * 	    that may not be true on your system.  You may want to");
-    puts(" *	    define STDARG (if using ANSI C) or VARARGS.");
-    puts(" */");
-    puts("typedef char *va_list;");
-    puts("#define va_start(ap,parmn) (void)((ap) = (char*)(&(parmn) + 1))");
-    puts("#define va_end(ap) (void)((ap) = 0)");
-    puts("#define va_arg(ap, type) \\");
-    puts("        (((type*)((ap) = ((ap) + sizeof(type))))[-1])");
-    puts("#define SIMULATE_STDARG /* use std_arg.h to simulate <stdarg.h> */");
+	puts("/*");
+	puts(" * SIMULATE_STDARG");
+	puts(" *");
+	puts(" * WARNING: This type of stdarg makes assumptions about the stack");
+	puts(" * 	    that may not be true on your system.  You may want to");
+	puts(" *	    define STDARG (if using ANSI C) or VARARGS.");
+	puts(" */");
+	puts("typedef char *va_list;");
+	puts("#define va_start(ap,parmn) (void)((ap) = (char*)(&(parmn) + 1))");
+	puts("#define va_end(ap) (void)((ap) = 0)");
+	puts("#define va_arg(ap, type) \\");
+	puts("        (((type*)((ap) = ((ap) + sizeof(type))))[-1])");
+	puts("#define SIMULATE_STDARG /* use std_arg.h to simulate <stdarg.h> */");
 #else
-    puts("#define STDARG /* use <stdarg.h> */");
-    puts("#include <stdarg.h>");
+	puts("#define STDARG /* use <stdarg.h> */");
+	puts("#include <stdarg.h>");
 #endif
-    puts("\n/* should we use vsprintf()? */");
+	puts("\n/* should we use vsprintf()? */");
 #if !defined(DONT_HAVE_VSPRINTF)
-    puts("#define HAVE_VS /* yes */");
+	puts("#define HAVE_VS /* yes */");
 #else
-    puts("/*");
-    puts(" * Hack aleart!!!");
-    puts(" *");
-    puts(" * Systems that do not have vsprintf() need something.  In some");
-    puts(" * cases the sprintf function will deal correctly with the");
-    puts(" * va_alist 3rd arg.  Hope for the best!");
-    puts(" */");
-    puts("#define vsprintf sprintf");
-    puts("#undef HAVE_VS");
+	puts("/*");
+	puts(" * Hack aleart!!!");
+	puts(" *");
+	puts(" * Systems that do not have vsprintf() need something.  In some");
+	puts(" * cases the sprintf function will deal correctly with the");
+	puts(" * va_alist 3rd arg.  Hope for the best!");
+	puts(" */");
+	puts("#define vsprintf sprintf");
+	puts("#undef HAVE_VS");
 #endif
-    exit(0);
+	/* exit(0); */
+	return 0;
 }

have_uid_t.c

@@ -47,7 +47,7 @@
 #include <sys/types.h>
 #endif /* ! HAVE_NO_UID_T */
 
-MAIN
+int
 main(void)
 {
 #if defined(HAVE_NO_UID_T)
@@ -60,5 +60,6 @@ main(void)
 
 	printf("#define HAVE_UID_T /* yes */\n");
 #endif /* HAVE_NO_UID_T */
-	exit(0);
+	/* exit(0); */
+	return 0;
 }

have_varvs.c

@@ -52,7 +52,7 @@ char buf[BUFSIZ];
 #include <varargs.h>
 
 void
-try(char *fmt, ...)
+try_this(char *fmt, ...)
 {
     va_list ap;
 
@@ -68,7 +68,7 @@ try(char *fmt, ...)
 #else
 
 void
-try(char *a, int b, char *c, int d)
+try_this(char *a, int b, char *c, int d)
 {
     return;
 }
@@ -76,56 +76,58 @@ try(char *a, int b, char *c, int d)
 #endif
 
 
-MAIN
+int
 main(void)
 {
-    /*
-     * setup
-     */
-    buf[0] = '\0';
+	/*
+	 * setup
+	 */
+	buf[0] = '\0';
 
-    /*
-     * test variable args and vsprintf/sprintf
-     */
-    try("@%d:%s:%d@", 1, "hi", 2);
-    if (strcmp(buf, "@1:hi:2@") != 0) {
+	/*
+	 * test variable args and vsprintf/sprintf
+	 */
+	try_this("@%d:%s:%d@", 1, "hi", 2);
+	if (strcmp(buf, "@1:hi:2@") != 0) {
 #if !defined(DONT_HAVE_VSPRINTF)
-	/* <varargs.h> with vsprintf() didn't work */
+	    /* <varargs.h> with vsprintf() didn't work */
 #else
-	/* <varargs.h> with sprintf() simulating vsprintf() didn't work */
+	    /* <varargs.h> with sprintf() simulating vsprintf() didn't work */
 #endif
-	exit(1);
-    }
-    try("%s %d%s%d%d %s",
-	"Landon Noll 1st proved that", 2, "^", 23209, -1, "was prime");
-    if (strcmp(buf, "Landon Noll 1st proved that 2^23209-1 was prime") != 0) {
+	    exit(1);
+	}
+	try_this("%s %d%s%d%d %s",
+	    "Landon Noll 1st proved that", 2, "^", 23209, -1, "was prime");
+	if (strcmp(buf,
+		   "Landon Noll 1st proved that 2^23209-1 was prime") != 0) {
 #if !defined(DONT_HAVE_VSPRINTF)
-	/* <stdarg.h> with vsprintf() didn't work */
+	    /* <stdarg.h> with vsprintf() didn't work */
 #else
-	/* <stdarg.h> with sprintf() simulating vsprintf() didn't work */
+	    /* <stdarg.h> with sprintf() simulating vsprintf() didn't work */
 #endif
-	exit(1);
-    }
+	    exit(1);
+	}
 
-    /*
-     * report the result
-     */
-    puts("/* what type of variable args do we have? */");
-    puts("#define VARARGS /* use <varargs.h> */");
-    puts("#include <varargs.h>");
-    puts("\n/* should we use vsprintf()? */");
+	/*
+	 * report the result
+	 */
+	puts("/* what type of variable args do we have? */");
+	puts("#define VARARGS /* use <varargs.h> */");
+	puts("#include <varargs.h>");
+	puts("\n/* should we use vsprintf()? */");
 #if !defined(DONT_HAVE_VSPRINTF)
-    puts("#define HAVE_VS /* yes */");
+	puts("#define HAVE_VS /* yes */");
 #else
-    puts("/*");
-    puts(" * Hack aleart!!!");
-    puts(" *");
-    puts(" * Systems that do not have vsprintf() need something.  In some");
-    puts(" * cases the sprintf function will deal correctly with the");
-    puts(" * va_alist 3rd arg.  Hope for the best!");
-    puts(" */");
-    puts("#define vsprintf sprintf");
-    puts("#undef HAVE_VS");
+	puts("/*");
+	puts(" * Hack aleart!!!");
+	puts(" *");
+	puts(" * Systems that do not have vsprintf() need something.  In some");
+	puts(" * cases the sprintf function will deal correctly with the");
+	puts(" * va_alist 3rd arg.  Hope for the best!");
+	puts(" */");
+	puts("#define vsprintf sprintf");
+	puts("#undef HAVE_VS");
 #endif
-    exit(0);
+	/* exit(0); */
+	return 0;
 }

help/Makefile

@@ -124,7 +124,7 @@ DETAIL_HELP= abs access acos acosh acot acoth acsc acsch address agd append \
 	pmod polar poly pop popcnt power prevcand prevprime printf prompt \
 	protect ptest push putenv quo quomod rand randbit random randombit \
 	randperm rcin rcmul rcout rcpow rcsq re remove reverse rewind rm root \
-	round rsearch runtime saveval scale scan scanf search sec sech \
+	round rsearch runtime saveval scale scan scanf search sec sech seed \
 	segment select sgn sha sha1 sin sinh size sizeof sort sqrt srand \
 	srandom ssq str strcat strerror strlen strpos strprintf strscan \
 	strscanf substr sum swap system tail tan tanh test time trunc xor

help/environment

@@ -8,7 +8,7 @@ Environment variables
 	If this variable does not exist, a compiled value
 	is used.  Typically compiled in value is:
 
-		    .:./lib:~/lib:${LIBDIR}/calc
+		    .:./lib:~/lib:${LIBDIR}/calc:${LIBDIR}/custom
 
 	where ${LIBDIR} is usually:
 

help/isrand

@@ -25,7 +25,7 @@ LIBRARY
     none
 
 SEE ALSO
-    rand, srand, randbit,
+    seed, rand, srand, randbit,
     isassoc, isatty, isblk, isconfig, isdefined, iserror, iseven, isfile,
     ishash, isident, isint, islist, ismat, ismult, isnull, isnum, isobj,
     isobjtype, isodd, isprime, israndom, isreal, isrel,

help/israndom

@@ -27,7 +27,7 @@ LIBRARY
     none
 
 SEE ALSO
-    random, srandom, randombit,
+    seed, random, srandom, randombit,
     isassoc, isatty, isblk, isconfig, isdefined, iserror, iseven, isfile,
     ishash, isident, isint, islist, ismat, ismult, isnull, isnum, isobj,
     isobjtype, isodd, isprime, isrand, isreal, isrel,

help/overview

@@ -44,7 +44,7 @@
 
     for and overview of the help system.  The command:
 
-	    help builtins
+	    help builtin
 
     provides information on built-in mathematical functions, whereas:
 
@@ -67,6 +67,10 @@
     It contains information about differences between C and calc
     that may surprize you.
 
+    To learn about calc library files that are shipped with calc, try:
+
+	    help stdlib
+
     A full and extensive overview of calc may be obtained by:
 
 	    help full

help/rand

@@ -230,4 +230,4 @@ LIBRARY
     long irand(long max)
 
 SEE ALSO
-    srand, randbit, isrand, random, srandom, israndom
+    seed, srand, randbit, isrand, random, srandom, israndom

help/randbit

@@ -40,4 +40,4 @@ LIBRARY
     void zrand(long cnt, ZVALUE *res)
 
 SEE ALSO
-    srand, randbit, isrand, random, srandom, israndom
+    seed, srand, randbit, isrand, random, srandom, israndom

help/random

@@ -154,4 +154,4 @@ LIBRARY
     long irandom(long max)
 
 SEE ALSO
-    srand, randbit, isrand, rand, srandom, israndom
+    seed, srand, randbit, isrand, rand, srandom, israndom

help/randombit

@@ -39,4 +39,4 @@ LIBRARY
     void zrandom(long cnt, ZVALUE *res)
 
 SEE ALSO
-    srand, randbit, isrand, rand, srandom, israndom
+    seed, srand, randbit, isrand, rand, srandom, israndom

help/seed

@@ -0,0 +1,52 @@
+NAME
+    seed - return a value that may be used to seed a pseudo-random generator
+
+SYNOPSIS
+    seed()
+
+TYPES
+    return	integer
+
+DESCRIPTION
+    Generate a pseudo-random seed based on a collection of system and process
+    information.  The seed() builtin function returns a value:
+
+		0 <= seed < 2^64
+
+    IMPORTANT WARNING:
+
+	It should be pointed out that the information collected by seed
+	is almost certainly non-chaotic.  This function is likely not
+	suitable for applications (such as cryptographic applications)
+	where the unpredictability of seeds is critical.  For such critical
+	applications, lavarand should be used.  Seed:
+
+		http://lavarand.sgi.com
+
+	for information about seeding a pseudo-random number generator
+	(such as rand() or random()) with the cryptographic hash of the
+	digitization of chaotic system.
+
+    Given the above warning, this builtin function produces a seed that is
+    suitable for most applications that desire a different pseudo-random
+    sequence each time they are run.
+
+    The return value of this builtin function should NOT be considered
+    a random or pseudo-random value.  The return value should be used
+    as an argument to a seed function such as srand() or srandom().
+
+EXAMPLE
+    > print srand(seed())
+    RAND state
+
+    > print srandom(seed())
+    RAND state
+
+LIMITS
+    none
+
+LIBRARY
+    NUMBER *pseudo_seed(void)
+
+SEE ALSO
+    seed, srand, randbit, isrand, rand, random, srandom, israndom

help/srand

@@ -148,4 +148,4 @@ LIBRARY
     RAND *zsetrand(RAND *state)
 
 SEE ALSO
-    srandom, randbit, isrand, random, srandom, israndom
+    seed, srandom, randbit, isrand, random, srandom, israndom

help/srandom

@@ -337,4 +337,4 @@ LIBRARY
     RAND *zsetrandom(RAND *state)
 
 SEE ALSO
-    srand, randbit, isrand, random, srandom, israndom
+    seed, srand, randbit, isrand, random, srandom, israndom

help/todo

@@ -235,3 +235,9 @@ Needed enhancements
       One should make available a the fundimental math operations
       on ZVALUE, NUMBER and perhaps COMPLEX (without all of the
       other stuff) in a separate library.
+
+    * improve the coverage in the 'SEE ALSO' help file lists
+
+    * where reasonable, be sure that regress.cal tests builtin functions
+
+    * clean the source code and document it better

help/usage

@@ -2,7 +2,22 @@ Calc command line
 
     Calc has the following command line:
 
-	calc [-C] [-e] [-h] [-i] [-m mode] [-n] [-p] [-q] [-u] [calc_cmd ...]
+	calc [-c] [-C] [-d] [-e] [-h] [-i] [-m mode]
+	     [-n] [-p] [-q] [-u] [-v] [calc_cmd ...]
+
+	-c  Continue reading command lines even after an execution
+	    error has caused the abandonment of a line.
+
+	    For example:
+
+		calc read many_errors.cal
+
+	    will cause calc to abort on the first error, whereas:
+
+		calc -c read many_errors.cal
+
+	    will cause calc to try to process each line being read
+	    despite the errors that it encounters.
 
 	-C  Permit the execution of custom builtin functions.  Without
 	    this flag, calling the custom() builtin function will
@@ -12,6 +27,27 @@ Calc command line
 	    are non-standard and that are not portable.  Custom builtin
 	    functions are disabled by default for this reason.
 
+	-d  Disable the printing of the opening title.  The printing
+	    of library debug and informational messages is also disabled
+	    as if config("lib_debug",0) had been executed.
+
+	    For example:
+
+		calc 'read qtime; qtime(2)'
+
+	    will output something like:
+
+		qtime(utc_hr_offset) defined
+		It's nearly ten past six.
+
+	    whereas:
+
+		calc -d 'read qtime; qtime(2)'
+
+	    will just say:
+
+		It's nearly ten past six.
+
 	-e  Ignore any environment variables on startup.  The
 	    getenv() builtin will still return values, however.
 
@@ -19,7 +55,21 @@ Calc command line
 	    is equivalent to the calc command help help.  The help
 	    facility is disabled unless the mode is 5 or 7.  See -m.
 
-	-i  Do not about if the error count exceeds maxerr().
+	-i  Become interactive if possible.  Be default, if calc_cmd
+	    args are given, calc will execute them and exit.  This flag
+	    will cause calc to drop into interactive mode after the
+	    commands are executed.
+
+	    For example:
+
+		calc 2+5
+
+	    will print the value 7 and exit whereas:
+
+		calc -i 2+5
+
+	    will print the value 7 and prompt the user for more
+	    calc commands.
 
 	-m mode
 	   This flag sets the permission mode of calc.  It
@@ -38,7 +88,7 @@ Calc command line
 		6  do not execute any program
 		7  allow everything (default mode)
 
-	   If one wished to run calc from a privledged user, one
+	   If one wished to run calc from a privileged user, one
 	   might want to use -m 0 in an effort to make calc more
 	   secure.
 
@@ -46,7 +96,7 @@ Calc command line
 	   open.  Files already open are not effected. Thus if one
 	   wanted to use the -m 0 in an effort to make calc more
 	   secure, but still wanted to read and write a specific
-	   file, one might want to do:
+	   file, one might want to do in sh, ksh, bash-like shells:
 
 		     calc -m 0 3<a.file
 
@@ -59,25 +109,28 @@ Calc command line
 	   given.  The reading of key bindings is also disabled
 	   when the mode disables opening of files for reading.
 
-	-n  Use the new configutation defaults instead of the old
+	-n  Use the new configuration defaults instead of the old
 	    default classic defaults.  This flag as the same effect
 	    as executing config("all", "newcfg") at startup time.
 
 	-p  Pipe processing is enabled by use of -p.  For example:
 
-		     echo "print 2^21701-1, 2^23209-1" | calc -p | fizzbin
+		     calc -p '2^21701-1' | fizzbin
 
-	    In pipe mode, calc does not prompt, does not print
-	    leading tabs and does not print the initial header.
+	    In pipe mode, calc does not prompt, does not print leading
+	    tabs and does not print the initial header.  The -p flag
+	    overrides -i.
 
 	-q  Disable the use of the $CALCRC startup scripts.
 
 	-u  Disable buffering of stdin and stdout.
 
+	-v  Print calc version number and exit.
+
     Without `calc_cmd', calc operates interactively.  If one or more
     `calc_cmd' are given on the command line, calc will execute them and
-    exit.  The printing of leading tabs on output is disabled as if
-    config("tab",0) had been executed.
+    exit.  If -i is given, calc will attempt to become interactive
+    even of one or more `calc_cmd' are given on the command line.
 
     Normally on startup, calc attempts to execute a collection of
     library scripts.  The environment variable $CALCRC (if non-existent
@@ -98,7 +151,8 @@ Calc command line
 
     Calc treats all open files, other than stdin, stdout and
     stderr as files available for reading and writing. One may
-    present calc with an already open file in the following way:
+    present calc with an already open file using sh, ksh or bash-like
+    shells is to:
 
         calc 3<open_file 4<open_file2
 

hist.c

@@ -421,12 +421,12 @@ do_map_line(char *line)
 	char	*map_name;
 
 	cp = line;
-	while (isspace(*cp))
+	while (isspace((int)*cp))
 		cp++;
 	if (*cp == '\0')
 		return NULL;
 	map_name = cp;
-	while ((*cp != '\0') && !isspace(*cp))
+	while ((*cp != '\0') && !isspace((int)*cp))
 		cp++;
 	*cp = '\0';
 	return find_map(map_name);
@@ -461,7 +461,7 @@ do_bind_line(KEY_MAP *map, char *line)
 	else if (key == '\\')
 		key = *cp++;
 
-	while (isspace(*cp))
+	while (isspace((int)*cp))
 		cp++;
 	if (*cp == '\0') {
 		unbind_key(map, key);
@@ -469,11 +469,11 @@ do_bind_line(KEY_MAP *map, char *line)
 	}
 
 	func_name = cp;
-	while ((*cp != '\0') && !isspace(*cp))
+	while ((*cp != '\0') && !isspace((int)*cp))
 		cp++;
 	if (*cp) {
 		*cp++ = '\0';
-		while (isspace(*cp))
+		while (isspace((int)*cp))
 			cp++;
 	}
 	func = find_func(func_name);
@@ -488,11 +488,11 @@ do_bind_line(KEY_MAP *map, char *line)
 			next = base_map;
 	} else {
 		next_name = cp;
-		while ((*cp != '\0') && !isspace(*cp))
+		while ((*cp != '\0') && !isspace((int)*cp))
 			cp++;
 		if (*cp) {
 			*cp++ = '\0';
-			while (isspace(*cp))
+			while (isspace((int)*cp))
 				cp++;
 		}
 		next = find_map(next_name);
@@ -515,18 +515,18 @@ do_default_line(KEY_MAP *map, char *line)
 	if (map == NULL)
 		return;
 	cp = line;
-	while (isspace(*cp))
+	while (isspace((int)*cp))
 		cp++;
 	if (*cp == '\0')
 		return;
 
 	func_name = cp;
-	while ((*cp != '\0') && !isspace(*cp))
+	while ((*cp != '\0') && !isspace((int)*cp))
 		cp++;
 	if (*cp != '\0')
 	{
 		*cp++ = '\0';
-		while (isspace(*cp))
+		while (isspace((int)*cp))
 			cp++;
 	}
 	func = find_func(func_name);
@@ -538,12 +538,12 @@ do_default_line(KEY_MAP *map, char *line)
 	else
 	{
 		next_name = cp;
-		while ((*cp != '\0') && !isspace(*cp))
+		while ((*cp != '\0') && !isspace((int)*cp))
 			cp++;
 		if (*cp != '\0')
 		{
 			*cp++ = '\0';
-			while (isspace(*cp))
+			while (isspace((int)*cp))
 				cp++;
 		}
 		next = find_map(next_name);
@@ -577,7 +577,7 @@ read_bindings(FILE *fp)
 
 	while (fgets(line, sizeof(line) - 1, fp)) {
 		cp = line;
-		while (isspace(*cp))
+		while (isspace((int)*cp))
 			cp++;
 
 		if ((*cp == '\0') || (*cp == '#') || (*cp == '\n'))

hist.h

@@ -30,7 +30,6 @@
 #define DOTCHAR		'.'	/* char which indicates current directory */
 #define	PATHCHAR	'/'	/* char which separates path components */
 #define	LISTCHAR	':'	/* char which separates paths in a list */
-#define	PATHSIZE	1024	/* maximum length of path name */
 
 
 /*

input.c

@@ -91,20 +91,51 @@ opensearchfile(char *name, char *pathlist, char *extension, int rd_once)
 {
 	int i;
 	char *cp;
-	char path[PATHSIZE+1];	/* name being searched for */
+	char *path;		/* name being searched for */
 	struct stat statbuf;	/* stat of the path */
+	unsigned long namelen;	/* length of name */
+	unsigned long extlen;	/* length of the extension if non-NULL or 0 */
+	unsigned long pathlen;	/* length of the pathlist if non-NULL or 0 */
+
+	/*
+	 * allocate storage for the longest name being searched for
+	 *
+	 * We will allocate more than we could ever want/need.
+	 * The longest we could ever need would be:
+	 *
+	 *	pathlist (as a single long string)
+	 *	/
+	 *	name
+	 *	.
+	 *	extenstion
+	 *	\0
+	 *	guard byte
+	 */
+	namelen = strlen(name);
+	if (extension != NULL) {
+	    extlen = strlen(extension);
+	} else {
+	    extlen = 0;
+	}
+	if (pathlist != NULL) {
+	    pathlen = strlen(pathlist);
+	} else {
+	    pathlen = 0;
+	}
+	path = malloc(pathlen+1 + 1 + namelen+1 + extlen+1 + 1 + 1);
+	if (path == NULL) {
+		math_error("Cannot allocate filename path buffer");
+		/*NOTREACHED*/
+	}
 
 	/*
 	 * Don't try the extension if the filename already contains it.
 	 */
-	if (extension) {
-		unsigned long namelen = strlen(name);
-		unsigned long extlen = strlen(extension);
-
-		if (namelen >= extlen &&
-		    strcmp(&name[namelen-extlen], extension) == 0)
-			extension = NULL;
+	if (extension != NULL && namelen >= extlen &&
+	    strcmp(&name[namelen-extlen], extension) == 0) {
+		extension = NULL;
 	}
+
 	/*
 	 * If the name is absolute, or if there is no path list, then
 	 * make one which just searches for the name straight.  Then
@@ -127,21 +158,26 @@ opensearchfile(char *name, char *pathlist, char *extension, int rd_once)
 			*cp++ = PATHCHAR;
 		strcpy(cp, name);
 		i = openfile(path);
-		if ((i < 0) && (extension != NULL && extension[0] != '\0')) {
+		if ((i < 0) &&
+		    (extension != NULL && extension[0] != '\0')) {
 			strcat(path, extension);
 			i = openfile(path);
 		}
 	} while ((i < 0) && *pathlist);
 
 	/* examine what our search produced */
-	if (i < 0)
+	if (i < 0) {
+		free(path);
 		return i;
+	}
 	if (cip->i_fp == NULL) {
 		/* cannot find a file to open */
+		free(path);
 		return -3;
 	}
 	if (fstat(fileno(cip->i_fp), &statbuf) < 0) {
 		/* unable to fstat the open file */
+		free(path);
 		return -4;
 	}
 
@@ -149,6 +185,7 @@ opensearchfile(char *name, char *pathlist, char *extension, int rd_once)
 	if (rd_once == TRUE && isinoderead(&statbuf) >= 0) {
 		/* file is in readset and reopen is false */
 		closeinput();
+		free(path);
 		return 1;
 	}
 
@@ -156,10 +193,12 @@ opensearchfile(char *name, char *pathlist, char *extension, int rd_once)
 	if (addreadset(name, path, &statbuf) < 0) {
 		/* cannot add to readset */
 		closeinput();
+		free(path);
 		return -1;
 	}
 
 	/* file was added to/updated in readset */
+	free(path);
 	return 0;
 }
 
@@ -189,7 +228,7 @@ homeexpand(char *name)
 	char *home2;		/* fullpath of the home directory */
 	char *fullpath;		/* the malloced expanded path */
 	char *after;		/* after the ~user or ~ */
-	char username[PATHSIZE+1];	/* extratced username */
+	char *username;		/* extratced username */
 
 	/* firewall */
 	if (name[0] != HOMECHAR)
@@ -217,11 +256,15 @@ homeexpand(char *name)
 			}
 			/* just malloc the home directory and return it */
 			fullpath = (char *)malloc(strlen(ent->pw_dir)+1);
+			if (fullpath == NULL) {
+				return NULL;
+			}
 			strcpy(fullpath, ent->pw_dir);
 			return fullpath;
 		}
-		if (after-name > PATHSIZE+1) {
-			/* username is too big */
+		username = (char *) malloc(after-name + 1 + 1);
+		if (username == NULL) {
+			/* failed to malloc username */
 			return NULL;
 		}
 		strncpy(username, name+1, after-name-1);
@@ -229,6 +272,7 @@ homeexpand(char *name)
 
 		/* get that user's home directory */
 		ent = (struct passwd *)getpwnam(username);
+		free(username);
 		if (ent == NULL) {
 			/* unknown user */
 			return NULL;
@@ -241,6 +285,9 @@ homeexpand(char *name)
 	 * build the fullpath given the home directory
 	 */
 	fullpath = (char *)malloc(strlen(home2)+strlen(after)+1);
+	if (fullpath == NULL) {
+		return NULL;
+	}
 	sprintf(fullpath, "%s%s", home2, after);
 	return fullpath;
 }
@@ -264,7 +311,7 @@ f_open(char *name, char *mode)
 	 */
 	if (!allow_read && !allow_write) {
 		/* no reads and no writes means no opens! */
-		if (start_done) {
+		if (run_state > RUN_PRE_BEGIN) {
 			fprintf(stderr,
 				"open of %s mode %s - %s\n", name, mode,
 				"open for read or write disallowed by -m\n");
@@ -272,7 +319,7 @@ f_open(char *name, char *mode)
 		return NULL;
 	} else if (!allow_read && strchr(mode, 'r') != NULL) {
 		/* reading new files disallowed */
-		if (start_done) {
+		if (run_state > RUN_PRE_BEGIN) {
 			fprintf(stderr,
 				"open of %s mode %s - %s\n", name, mode,
 				"open for read disallowed by -m\n");
@@ -283,7 +330,7 @@ f_open(char *name, char *mode)
 		    strchr(mode, 'a') != NULL ||
 		    strchr(mode, '+') != NULL)) {
 		/* writing new files disallowed */
-		if (start_done) {
+		if (run_state > RUN_PRE_BEGIN) {
 			fprintf(stderr,
 				"open of %s mode %s - %s\n", name, mode,
 				"open for write disallowed by -m\n");
@@ -333,6 +380,9 @@ openfile(char *name)
 	cip->i_fp = fp;
 	cip->i_line = 1;
 	cip->i_name = (char *)malloc(strlen(name) + 1);
+	if (cip->i_name == NULL) {
+		 return -1;
+	}
 	strcpy(cip->i_name, name);
 	return 0;
 }
@@ -658,7 +708,7 @@ reread(void)
 void
 runrcfiles(void)
 {
-	char path[PATHSIZE+1];	/* name being searched for */
+	char path[MAX_CALCRC+1+1];	/* name being searched for */
 	char *cp;
 	char *newcp;
 	char *p;

lib/Makefile

@@ -44,7 +44,7 @@ CALC_FILES= README bigprime.cal deg.cal ellip.cal lucas.cal lucas_chk.cal \
 	test2700.cal test3100.cal test3300.cal test3400.cal prompt.cal \
 	test3500.cal seedrandom.cal test4000.cal test4100.cal test4600.cal \
 	beer.cal hello.cal test5100.cal test5200.cal randombitrun.cal \
-	randomrun.cal xx_print.cal natnumset.cal
+	randomrun.cal xx_print.cal natnumset.cal qtime.cal
 
 # These files are found (but not built) in the distribution
 #

lib/README

@@ -1,20 +1,44 @@
-# Copyright (c) 1997 David I. Bell and Landon Curt Noll
-# Permission is granted to use, distribute, or modify this source,
-# provided that this copyright notice remains intact.
+To load a library, try:
 
-The following calc library files are provided because they serve as
-examples of how use the calc language, and/or because the authors thought
-them to be useful!
+    read filename
+
+You to not need to add the .cal extension to the filename.  Calc
+will search along the $CALCPATH (see ``help environment'').
+
+Normally a library will simply define some functions.  By default,
+most libraries will print out a short message when thei are read.
+For example:
+
+    > read lucas
+    lucas(h,n) defined
+    gen_u0(h,n,v1) defined
+    gen_v1(h,n) defined
+    ldebug(funct,str) defined
+
+will cause calc to load and execute the 'lucas.cal' library.
+Executing the library will cause several functions to be defined.
+Executing the lucas function
+
+    > lucas(149,60)
+	    1
+    > lucas(146,61)
+	    0
+
+shows that 149*2^60-1 is prime whereas 146*2^61-1 is not.
+
+=-=
+
+Calc library files are provided because they serve as examples of how use
+the calc language, and/or because the authors thought them to be useful!
 
 If you write something that you think is useful, please send it to:
 
-    dbell@auug.org.au
-    chongo@toad.com                 {uunet,pyramid,sun}!hoptoad!chongo
+    calc-tester@postofc.corp.sgi.com
 
 By convention, a lib file only defines and/or initializes functions,
-objects and variables.  (The regression test is an exception.)  Also by
-convention, the a usage message regarding each important object and
-function is printed at the time of the read.
+objects and variables.  (The regress.cal and testxxx.cal regression test
+suite is an exception.)  Also by convention, an additional usage message
+regarding important object and functions is printed.
 
 If a lib file needs to load another lib file, it should use the -once
 version of read:
@@ -45,18 +69,29 @@ global variable.  By convention, "lib_debug" has the following meanings:
 		    printed at the time of the read in addition
 		    to other debug messages
 
-To conform to the above convention, your lib files should end with
-lines of the form:
+When config("lib_debug") >= 0, function names and their arg are
+printed as they are defined.  Sometimes this printing is not enough
+information.  For example:
+
+	* useful obj definitions
+	* functions with optional args
+	* functions with optional args where the param() interface is used
+
+For these cases we suggest that you place at the bottom of your code
+something like:
 
 	if (config("lib_debug") >= 0) {
 		print "obj xyz defined";
-		print "funcA(side_a, side_b, side_c) defined";
-		print "funcB(size, mass) defined";
+		print "funcA([val1 [, val2]]) defined";
+		print "funcB(size, mass, ...) defined";
 	}
 
-
 =-=
 
+The following is a brief description of some of the calc library files
+that are shipped with calc.  See above for example of how to read in
+and execute these files.
+
 beer.cal
 
     Calc's contribution to the 99 Bottles of Beer web page:
@@ -100,7 +135,7 @@ deg.cal
 
 ellip.cal
 
-    factor(iN, ia, B, force)
+    efactor(iN, ia, B, force)
 
     Attempt to factor using the elliptic functions: y^2 = x^3 + a*x + b.
 
@@ -160,7 +195,7 @@ mfactor.cal
 
 mod.cal
 
-    mod(a)
+    lmod(a)
     mod_print(a)
     mod_one()
     mod_cmp(a, b)
@@ -250,7 +285,7 @@ pix.cal
 
 pollard.cal
 
-    factor(N, N, ai, af)
+    pfactor(N, N, ai, af)
 
     Factor using Pollard's p-1 method.
 
@@ -276,6 +311,13 @@ psqrt.cal
     Calculate square roots modulo a prime
 
 
+qtime.cal
+
+    qtime(utc_hr_offset)
+
+    Print the time as English sentence given the hours offset from UTC.
+
+
 quat.cal
 
     quat(a, b, c, d)
@@ -520,6 +562,20 @@ test3400.cal
     This script is used by regress.cal to test trig functions.
     containing objects.
 
+test3500.cal
+
+    global defaultverbose
+    global err
+    testfrem(x, y, verbose)
+    testgcdrem(x, y, verbose)
+    testf(str, n, verbose)
+    testg(str, n, verbose)
+    testh(str, n, N, verbose)
+    test3500(verbose, n, N)
+
+    This script is used by regress.cal to test the functions frem,
+    fcnt, gcdrem.
+
 test4000.cal
 
     global defaultverbose
@@ -617,7 +673,7 @@ varargs.cal
 
 xx_print.cal
 
-    isoctet(a) defined
+    is_octet(a) defined
     list_print(a) defined
     mat_print (a) defined
     octet_print(a) defined
@@ -628,3 +684,9 @@ xx_print.cal
     error_print(a) defined
 
     Demo for the xx_print object routines.
+
+=-=
+
+# Copyright (c) 1999 David I. Bell and Landon Curt Noll
+# Permission is granted to use, distribute, or modify this source,
+# provided that this copyright notice remains intact.

lib/beer.cal

@@ -20,7 +20,3 @@ for (i=99; i > 0;) {
 	bottles = (i!=1) ? "bottles" : "bottle";
 	print less, bottles, "of beer on the wall!\n";
 }
-
-if (config("lib_debug") >= 0) {
-	/* nothing to do! */
-}

lib/bernoulli.cal

@@ -60,7 +60,3 @@ define B(n)
 	Bnmax = n;
 	return Bn[n];
 }
-
-if (config("lib_debug") >= 0) {
-    print "B(n) defined";
-}

lib/bigprime.cal

@@ -25,7 +25,3 @@ define bigprime(a, m, p)
 		print "	" : n;
 	}
 }
-
-if (config("lib_debug") >= 0) {
-    print "bigprime(a, m, p) defined";
-}

lib/deg.cal

@@ -113,11 +113,4 @@ define fixdms(a)
 
 if (config("lib_debug") >= 0) {
     print "obj dms {deg, min, sec} defined";
-    print "dms(deg, min, sec) defined";
-    print "dms_add(a, b) defined";
-    print "dms_neg(a) defined";
-    print "dms_sub(a, b) defined";
-    print "dms_mul(a, b) defined";
-    print "dms_print(a) defined";
-    print "dms_abs(a) defined";
 }

lib/ellip.cal

@@ -24,7 +24,7 @@
  * only an approximation, read "A Course in Number Theory and Cryptography"
  * by Neal Koblitz for a good explanation.
  *
- * factor(iN, ia, B, force)
+ * efactor(iN, ia, B, force)
  *	iN is the number to be factored.
  *	ia is the initial value of a in the equation, and each successive
  *	value of a is an independent attempt at factoring (default 1).
@@ -66,7 +66,7 @@ global	b;		/* second coefficient */
 global	f;		/* found factor */
 
 
-define factor(iN, ia, B, force)
+define efactor(iN, ia, B, force)
 {
 	local	C, x, p;
 
@@ -165,7 +165,3 @@ define point_pow(p, pow)
 	}
 	return r;
 }
-
-if (config("lib_debug") >= 0) {
-    print "factor(N, I, B, force) defined";
-}

lib/hello.cal

@@ -6,7 +6,3 @@
  */
 
 while(1) print "Hello World!";
-
-if (config("lib_debug") >= 0) {
-    /* nothing to do */
-}

lib/lucas.cal

@@ -1029,7 +1029,3 @@ ldebug(funct, str)
 	}
 	return;
 }
-
-if (config("lib_debug") >= 0) {
-    print "lucas(h, n) defined";
-}

lib/lucas_chk.cal

@@ -374,7 +374,3 @@ lucas_chk(high_n, quiet)
 		return 0;
 	}
 }
-
-if (config("lib_debug") >= 0) {
-    print "lucas_chk(high_n) defined";
-}

lib/mersenne.cal

@@ -31,7 +31,3 @@ define mersenne(p)
 	/* 2^p-1 is prime iff u(p) = 0 mod 2^p-1 */
 	return (u == 0);
 }
-
-if (config("lib_debug") >= 0) {
-    print "mersenne(p) defined";
-}

lib/mod.cal

@@ -12,12 +12,12 @@ obj mod {a};			/* definition of the object */
 global mod_value = 100;		/* modulus value (value of N) */
 
 
-define mod(a)
+define lmod(a)
 {
 	local obj mod	x;
 
 	if (!isreal(a) || !isint(a))
-		quit "Bad argument for mod function";
+		quit "Bad argument for lmod function";
 	x.a = a % mod_value;
 	return x;
 }
@@ -34,7 +34,7 @@ define mod_print(a)
 
 define mod_one()
 {
-	return mod(1);
+	return lmod(1);
 }
 
 
@@ -51,9 +51,9 @@ define mod_cmp(a, b)
 define mod_rel(a, b)
 {
 	if (isnum(a))
-		a = mod(a);
+		a = lmod(a);
 	if (isnum(b))
-		b = mod(b);
+		b = lmod(b);
 	if (a.a < b.a)
 		return -1;
 	return a.a != b.a;
@@ -163,9 +163,9 @@ define mod_div(a, b)
 
 	obj mod x, y;
 	if (isnum(a))
-		a = mod(a);
+		a = lmod(a);
 	if (isnum(b))
-		b = mod(b);
+		b = lmod(b);
 	c = gcd(a.a, b.a);
 	x.a = a.a / c;
 	y.a = b.a / c;
@@ -191,20 +191,6 @@ define mod_pow(a, b)
 
 if (config("lib_debug") >= 0) {
     print "obj mod {a} defined";
-    print "mod(a) defined";
-    print "mod_print(a) defined";
-    print "mod_one(a) defined";
-    print "mod_cmp(a, b) defined";
-    print "mod_rel(a, b) defined";
-    print "mod_add(a, b) defined";
-    print "mod_sub(a, b) defined";
-    print "mod_mod(a, b) defined";
-    print "mod_square(a) defined";
-    print "mod_inc(a) defined";
-    print "mod_dec(a) defined";
-    print "mod_inv(a) defined";
-    print "mod_div(a, b) defined";
-    print "mod_pow(a, b) defined";
     print "mod_value defined";
     print "set mod_value as needed";
 }

lib/natnumset.cal

@@ -592,41 +592,3 @@ define set_print(a)
 }
 
 local N, M;	/* End scope of static variables N, M */
-
-if (config("lib_debug") >= 0) {
-    print "isset(a) defined";
-    print "setbound(n) defined";
-    print "empty() defined";
-    print "full() defined";
-    print "isin(a, b) defined";
-    print "addmember(a, n) defined";
-    print "rmmember(a, n) defined";
-    print "set() defined";
-    print "mkset(s) defined";
-    print "primes(a, b) defined";
-    print "set_max(a) defined";
-    print "set_min(a) defined";
-    print "set_not(a) defined";
-    print "set_cmp(a, b) defined";
-    print "set_rel(a, b) defined";
-    print "set_or(a, b) defined";
-    print "set_and(a, b) defined";
-    print "set_comp(a) defined";
-    print "set_setminus(a, b) defined";
-    print "set_xor(a,b) defined";
-    print "set_content(a) defined";
-    print "set_add(a, b) defined";
-    print "set_sub(a, b) defined";
-    print "set_mul(a, b) defined";
-    print "set_square(a) defined";
-    print "set_pow(a, n) defined";
-    print "set_sum(a) defined";
-    print "set_plus(a) defined";
-    print "interval(a, b) defined";
-    print "isinterval(a) defined";
-    print "set_mod(a, b) defined";
-    print "randset(n, a, b) defined";
-    print "polyvals(L, A) defined";
-    print "polyvals2(L, A, B) defined";
-    print "set_print(a) defined";
-}

lib/pell.cal

@@ -66,8 +66,3 @@ define pellx(D)
 	}
 	return Q1;
 }
-
-if (config("lib_debug") >= 0) {
-    print "pell(D) defined";
-    print "pellx(D) defined";
-}

lib/pi.cal

@@ -47,7 +47,3 @@ define qpi(epsilon)
 	}
 	return (bround(1/an, bits));
 }
-
-if (config("lib_debug") >= 0) {
-    print "qpi(epsilon) defined";
-}

lib/pix.cal

@@ -38,7 +38,3 @@ define pi_of_x(x)
 	}
 	return primes;
 }
-
-if (config("lib_debug") >= 0) {
-	print "pi_of_x(x) defined";
-}

lib/pollard.cal

@@ -6,7 +6,7 @@
  * Factor using Pollard's p-1 method.
  */
 
-define factor(N, B, ai, af)
+define pfactor(N, B, ai, af)
 {
 	local	a, k, i, d;
 
@@ -28,7 +28,3 @@ define factor(N, B, ai, af)
 	}
 	return 1;
 }
-
-if (config("lib_debug") >= 0) {
-    print "factor(N, B, ai, af) defined";
-}

lib/poly.cal

@@ -689,39 +689,4 @@ c=pol(1+2i,3+4i,5+6i);
 
 if (config("lib_debug") >= 0) {
 	print "obj poly {p} defined";
-	print "pol() defined";
-	print "poly_print(a) defined";
-	print "poly_add(a, b) defined";
-	print "poly_sub(a, b) defined";
-	print "poly_mul(a, b) defined";
-	print "poly_div(a, b) defined";
-	print "poly_quo(a,b) defined";
-	print "poly_mod(a,b) defined";
-	print "poly_neg(a) defined";
-	print "poly_conj(a) defined";
-	print "poly_cmp(a,b) defined";
-	print "iszero(a) defined";
-	print "plist(a) defined";
-	print "listmul(a,b) defined";
-	print "ev(a,t) defined";
-	print "evp(s,t) defined";
-	print "ispoly(a) defined";
-	print "isstring(a) defined";
-	print "var(name) defined";
-	print "pcoeff(a) defined";
-	print "pterm(a,n) defined";
-	print "deg(a) defined";
-	print "polydiv(a,b) defined";
-	print "D(a,n) defined";
-	print "Dp(a,n) defined";
-	print "pgcd(a,b) defined";
-	print "plcm(a,b) defined";
-	print "monic(a) defined";
-	print "pfgcd(a,b) defined";
-	print "interp(X,Y,x) defined";
-	print "makediffs(X,Y) defined";
-	print "evalfd(T,x) defined";
-	print "mdet(A) defined";
-	print "M(A,n,I,J) defined";
-	print "mprint(A) defined";
 }

lib/prompt.cal

@@ -94,8 +94,3 @@ define showvalues(str) {
 		print "\t":eval(str);
 	}
 }
-
-if (config("lib_debug") >= 0) {
-	print "adder() defined";
-	print "showvalues(str) defined";
-}

lib/psqrt.cal

@@ -48,8 +48,3 @@ define psqrt(u, p)
 	}
 	return min(v, p - v);
 }
-
-
-if (config("lib_debug") >= 0) {
-    print "psqrt(u, p) defined";
-}

lib/qtime.cal

@@ -0,0 +1,60 @@
+/*
+ * qtime - Display time as English sentence
+ *
+ * usage:
+ *	qtime(utc_hr_offset)
+ *
+ *	utc_hr_offset	Offset from UTC in hours.
+ *
+ * Written by: Klaus Alexander Seistrup <kseis@magnetic-ink.dk>
+ * With minor mods by: Landon Curt Noll <chongo@toad.com>
+ *
+ * See:
+ *	http://www.magnetic-ink.dk/download/qtime.html
+ *
+ * for examples of qtime() written on other languages.
+ */
+
+/*
+ * qtime - Display time as English sentence
+ */
+define qtime(utc_hr_offset)
+{
+    static mat hr[12] = {
+      "twelve", "one", "two", "three", "four", "five",
+      "six", "seven", "eight", "nine", "ten", "eleven"
+    };
+    static mat mn[7] = {
+      "", "five ", "ten ", "a quarter ", "twenty ", "twenty-five ", "half "
+    };
+    static mat ny[5] = {
+      "nearly ", "almost ", "", "just after ", "after "
+    };
+    static mat up[3] = {
+      "to ", "", "past "
+    };
+    local adj_mins = (((time() + utc_hr_offset*3600) % 86400) + 30) // 60 + 27;
+    local hours	= (adj_mins // 60) % 12;
+    local minutes = adj_mins % 60;
+    local almost =  minutes % 5;
+    local divisions = (minutes // 5) - 5;
+    local to_past_idx =  divisions > 0 ? 1 : 0;
+
+    if (divisions < 0) {
+	divisions = -divisions;
+	to_past_idx = -1;
+    }
+    ++to_past_idx;
+
+    /*
+     * Print the English sentence
+     *
+     * We avoid forward and back quotes just to show that the char()
+     * builtin function can be used in conjunction with a printf.
+     */
+    printf("It%cs %s%s%s%s",
+	    char(0x27), ny[almost], mn[divisions], up[to_past_idx], hr[hours]);
+    if (divisions == 0)
+	printf(" o%cclock", char(0x27));
+    printf (".\n");
+}

lib/quat.cal

@@ -197,19 +197,4 @@ define quat_shift(a, b)
 
 if (config("lib_debug") >= 0) {
     print "obj quat {s, v} defined";
-    print "quat(a, b, c, d) defined";
-    print "quat_print(a) defined";
-    print "quat_norm(a) defined";
-    print "quat_abs(a, e) defined";
-    print "quat_conj(a) defined";
-    print "quat_add(a, e) defined";
-    print "quat_sub(a, e) defined";
-    print "quat_inc(a) defined";
-    print "quat_dec(a) defined";
-    print "quat_neg(a) defined";
-    print "quat_mul(a, b) defined";
-    print "quat_div(a, b) defined";
-    print "quat_inv(a) defined";
-    print "quat_scale(a, b) defined";
-    print "quat_shift(a, b) defined";
 }

lib/randbitrun.cal

@@ -112,7 +112,3 @@ define randbitrun(run_cnt)
     printf("length>%d\t\t\t\t\tcount=%d\n", MAX_RUN, long_run_cnt);
     printf("max length=%d\n", max_run);
 }
-
-if (config("lib_debug") >= 0) {
-    print "randbitrun([run_length]) defined";
-}

lib/randmprime.cal

@@ -129,7 +129,3 @@ randmprime(bits, seed, dbg)
     }
     return ret;
 }
-
-if (config("lib_debug") >= 0) {
-    print "randmprime(bits, seed [,dbg]) defined";
-}

lib/randombitrun.cal

@@ -112,7 +112,3 @@ define randombitrun(run_cnt)
     printf("length>%d\t\t\t\t\tcount=%d\n", MAX_RUN, long_run_cnt);
     printf("max length=%d\n", max_run);
 }
-
-if (config("lib_debug") >= 0) {
-    print "randombitrun([run_length]) defined";
-}

lib/randomrun.cal

@@ -121,7 +121,3 @@ define randomrun(run_cnt)
     printf("length>%d\t\t\t\t\tcount=%d\n", MAX_RUN, long_run_cnt);
     printf("max length=%d\n", max_run);
 }
-
-if (config("lib_debug") >= 0) {
-    print "randomrun([run_length]) defined";
-}

lib/regress.cal

@@ -22,13 +22,13 @@ prob = 0;				/* clear problem counter */
 
 global junk;				/* throw away value */
 junk = errcount(0);			/* clear error count */
-junk = errmax(0x7fffffff);		/* set maximum error very high */
+junk = errmax(-1);			/* prevent errcount from abouting */
 
 global ecnt;				/* expected value of errcount() */
 ecnt = 0;				/* clear expected errcount() value */
 
 initcfg = config("all", "oldstd");	/* set config to startup default */
-initcfg = config("lib_debug", -1);	/* disable lib startup messages */
+initcfg = config("lib_debug", -4);	/* disable lib startup messages */
 initcfg = config("calc_debug", 1);	/* enable more internal debugging */
 initcfg = config("all");		/* save state for later use */
 
@@ -702,6 +702,8 @@ define test_functions()
 {
 	local a, b;
 	local pi;
+	local h, n, r, m, v;
+	local n2, m2, v2;
 
 	print '700: Beginning test_functions';
 
@@ -1163,7 +1165,31 @@ define test_functions()
 	vrfy(popcnt(pi(1e-20),0) == 69,	'1101: popcnt(pi(1e-20),0) == 69');
 	vrfy(popcnt(17^777) == 1593,	'1102: popcnt(17^777) == 1593');
 
-	print '1103: Ending test_functions';
+	/*
+	 * more hnrmod testing
+	 */
+	vrfy(hnrmod(21<<100+5,3,100,1) == (21<<100+5)%(3<<100+1),
+		'1103: hnrmod(21<<100+5,3,100,1) == (21<<100+5)%(3<<100+1)');
+	vrfy(hnrmod(21<<500+7,3,500,1) == (21<<500+7)%(3<<500+1),
+		'1104: hnrmod(21<<500+7,3,500,1) == (21<<500+7)%(3<<500+1)');
+	vrfy(hnrmod(-767256,84,1,0) == (-767256)%(84<<1+0),
+		'1105: hnrmod(-767256,84,1,0) == (-767256)%(84<<1+0)');
+	vrfy(hnrmod(-831150,75,1,0) == (-831150)%(75<<1+0),
+		'1106: hnrmod(-831150,75,1,0) == (-831150)%(75<<1+0)');
+	vrfy(hnrmod(-767256,84,1,1) == (-767256)%(84<<1+1),
+		'1107: hnrmod(-767256,84,1,1) == (-767256)%(84<<1+1)');
+	vrfy(hnrmod(-831150,75,1,1) == (-831150)%(75<<1+1),
+		'1108: hnrmod(-831150,75,1,1) == (-831150)%(75<<1+1)');
+	vrfy(hnrmod(-767256,84,1,-1) == (-767256)%(84<<1-1),
+		'1109: hnrmod(-767256,84,1,-1) == (-767256)%(84<<1-1)');
+	vrfy(hnrmod(-831150,75,1,-1) == (-831150)%(75<<1-1),
+		'1110: hnrmod(-831150,75,1,-1) == (-831150)%(75<<1-1)');
+	vrfy(hnrmod(21<<100+5,3,100,0) == (21<<100+5)%(3<<100+0),
+		'1111: hnrmod(21<<100+5,3,100,0) == (21<<100+5)%(3<<100+0)');
+	vrfy(hnrmod(21<<500+7,3,500,-1) == (21<<500+7)%(3<<500-1),
+		'1112: hnrmod(21<<500+7,3,500,-1) == (21<<500+7)%(3<<500-1)');
+
+	print '1113: Ending test_functions';
 }
 print '017: parsed test_functions()';
 
@@ -1529,7 +1555,12 @@ define test_rand()
 	vrfy(randbit() == 1,		  '1567: randbit() == 1');
 	vrfy(randbit() == 0,		  '1568: randbit() == 0');
 
-	print '1569: Ending rand test';
+	/* test seed() as best as we can */
+	vrfy(seed() >= 0,		  '1569: seed() >= 0');
+	vrfy(seed() < 2^64,		  '1570: seed() < 2^64');
+	vrfy(isrand(srand(seed())),	  '1571: isrand(srand(seed()))');
+
+	print '1572: Ending rand test';
 }
 print '025: parsed test_rand()';
 
@@ -4384,7 +4415,12 @@ define test_random()
 	vrfy(randombit(123) == 0x2058f802dd42b3aee4e734eacc13057, \
 		  '5463: randombit(123) == 0x2058f802dd42b3aee4e734eacc13057');
 
-	print '5464: Ending test_random';
+	/* test seed() as best as we can */
+	vrfy(seed() >= 0,		  '5464: seed() >= 0');
+	vrfy(seed() < 2^64,		  '5465: seed() < 2^64');
+	vrfy(israndom(srandom(seed())),	  '5466: israndom(srandom(seed()))');
+
+	print '5467: Ending test_random';
 }
 print '137: parsed test_random()';
 
@@ -5881,8 +5917,10 @@ define test_is()
 	 */
 	blkfree("blk5900");
 	print				  '6663: blkfree("blk5900")';
+	fclose(ofd);
+	print				  '6664: fclose(ofd)';
 
-	print '6664: Ending test_is';
+	print '6665: Ending test_is';
 }
 print '168: test_is()';
 
@@ -6972,7 +7010,7 @@ define test_bigcomb()
 {
 	local a, b, n, i, v1, v2;
 
-	print '7900: Starting test_bigcomb()';
+	print '7900: Starting test_bigcomb';
 	a = 1234/4321;
 	print				'7901: a = 1234/4321';
 	b = 3456/6543;
@@ -6995,7 +7033,7 @@ define test_bigcomb()
 	vrfy(f7900(-7/4,33/4,-2) == g7900(-7/4,33/4,-2),
 			'7913: f7900(-7/4,33/4,-2) == g7900(-7/4,33/4,-2)');
 
-	print '7914: Ending test_bigcomb()';
+	print '7914: Ending test_bigcomb';
 }
 print '186: parsed test_bigcomb()';
 
@@ -7010,7 +7048,7 @@ define test_natnumset()
 {
 	local A, B, C, D, P, P1, L1, L2;
 
-	print '8000: Starting test_natnumset()';
+	print '8000: Starting test_natnumset';
 
 	A = set(17, 2, 0, 24, 2);
 	print				'8101: A = set(17, 2, 0, 24, 2);';
@@ -7067,7 +7105,7 @@ define test_natnumset()
 	vrfy(polyvals2(L2,C,D) == set(12,16,21,27,45,55,77,91),
 		'8135: polyvals(L2,C,D) == set(12,16,21,27,45,55,77,91)');
 
-	print '8136: Ending test_natnumset()';
+	print '8136: Ending test_natnumset';
 }
 print '188: parsed test_natnumset()';
 
@@ -7077,7 +7115,7 @@ print '188: parsed test_natnumset()';
  */
 define test_somenew()
 {
-	print	'8200: Starting test_somenew()';
+	print	'8200: Starting test_somenew';
 
 	vrfy(char(-1) == char(255),	'8201: char(-1) == char(255)');
 	vrfy(char(258) == char(2),	'8202: char(258) == char(2)');
@@ -7101,7 +7139,7 @@ define test_somenew()
 	vrfy(1/(1/0) == 0,		'8215: 1/(1/0) == 0');
 	vrfy(inverse(1/0) == 0,		'8216: inverse(1/0) == 0');
 
-	print '8217: Ending test_somenew()';
+	print '8217: Ending test_somenew';
 }
 print '189: parsed test_somenew()';
 
@@ -7118,7 +7156,7 @@ print '200: Reserved for top level test use';
 define count_errors()
 {
 	if (prob  ==  0) {
-		print "9998: passed all tests  /\\../\\";
+		print "9997: passed all tests  /\\../\\";
 	} else {
 		print "****", prob, "error(s) found  \\/++\\/";
 	}
@@ -7354,6 +7392,96 @@ return test_natnumset();
 print;
 return test_somenew();
 
+
+/*
+ * read various calc libs
+ *
+ * We read most of the calc libs shipped with the distribution.
+ * There are a few lib files that are not read:
+ *
+ *	beer.cal	- prints a bunch of things when loaded
+ *	hello.cal	- designed to go into an infinite loop
+ *	lucal.cal	- already read by this file
+ *	lucas_chk.cal	- already read by this file
+ *	lucas_tbl.cal	- duplicatres code already read by another file
+ *	regress.cal	- this file
+ *	surd.cal	- already read by this file
+ *	testXXXX.cal	- already read by this file
+ *	xx_print.cal	- prints a bunch of things when loaded
+ *
+ * We want to do this 2nd to last; ahead of any final cleanup and behind
+ * all of real actions of regress.cal.
+ */
 print;
+print	'9800: Starting read of selected calc libs';
+read -once bernoulli;
+print	'9801: read -once bernoulli';
+read -once bigprime;
+print	'9802: read -once bigprime';
+read -once chrem;
+print	'9803: read -once chrem';
+read -once deg;
+print	'9804: read -once deg';
+read -once ellip;
+print	'9805: read -once ellip';
+read -once mersenne;
+print	'9806: read -once mersenne';
+read -once mfactor;
+print	'9807: read -once mfactor';
+read -once mod;
+print	'9808: read -once mod';
+read -once natnumset;
+print	'9809: read -once natnumset';
+read -once pell;
+print	'9810: read -once pell';
+read -once pi;
+print	'9811: read -once pi';
+read -once pix;
+print	'9812: read -once pix';
+read -once pollard;
+print	'9813: read -once pollard';
+read -once poly;
+print	'9814: read -once poly';
+read -once prompt;
+print	'9815: read -once prompt';
+read -once psqrt;
+print	'9816: read -once psqrt';
+read -once quat;
+print	'9817: read -once quat';
+read -once randbitrun;
+print	'9818: read -once randbitrun';
+read -once randmprime;
+print	'9819: read -once randmprime';
+read -once randombitrun;
+print	'9820: read -once randombitrun';
+read -once randomrun;
+print	'9821: read -once randomrun';
+read -once randrun;
+print	'9822: read -once randrun';
+read -once seedrandom;
+print	'9823: read -once seedrandom';
+read -once solve;
+print	'9824: read -once solve';
+read -once sumsq;
+print	'9825: read -once sumsq';
+read -once unitfrac;
+print	'9826: read -once unitfrac';
+read -once varargs;
+print	'9827: read -once varargs';
+read -once qtime;
+print	'9828: read -once qtime';
+print	'9829: Ending read of selected calc libs';
+
+
+/*
+ * cleanup and report the results
+ */
+print;
+freeredc();
+print '9995: freeredc()';
+freestatics();
+print '9996: freestatics()';
 return count_errors();
+freeglobals();
+print '9998: freeglobals()';
 print '9999: Ending regression tests';

lib/solve.cal

@@ -41,7 +41,3 @@ define solve(low, high, epsilon)
 		}
 	}
 }
-
-if (config("lib_debug") >= 0) {
-    print "solve(low, high, epsilon) defined";
-}

lib/sumsq.cal

@@ -37,7 +37,3 @@ define ss(p)
 	}
 	print a : "^2 +" , b : "^2 =" , a^2 + b^2;
 }
-
-if (config("lib_debug") >= 0) {
-    print "ss(p) defined";
-}

lib/surd.cal

@@ -263,25 +263,6 @@ define surd_rel(a, b)
 
 if (config("lib_debug") >= 0) {
     print "obj surd {a, b} defined";
-    print "surd(a, b) defined";
-    print "surd_print(a) defined";
-    print "surd_conj(a) defined";
-    print "surd_norm(a) defined";
-    print "surd_value(a, xepsilon) defined";
-    print "surd_add(a, b) defined";
-    print "surd_sub(a, b) defined";
-    print "surd_inc(a) defined";
-    print "surd_dec(a) defined";
-    print "surd_neg(a) defined";
-    print "surd_mul(a, b) defined";
-    print "surd_square(a) defined";
-    print "surd_scale(a, b) defined";
-    print "surd_shift(a, b) defined";
-    print "surd_div(a, b) defined";
-    print "surd_inv(a) defined";
-    print "surd_sgn(a) defined";
-    print "surd_cmp(a, b) defined";
-    print "surd_rel(a, b) defined";
     print "surd_type defined";
     print "set surd_type as needed";
 }

lib/test1700.cal

@@ -10,7 +10,3 @@
  */
 
 ++value;
-
-if (config("lib_debug") >= 0) {
-    /* nothing to do */
-}

lib/test2300.cal

@@ -95,7 +95,3 @@ define ckmat()
 	/* args match the matrix in the object */
 	return 1;
 }
-
-if (config("lib_debug") >= 0) {
-    /* nothing to do */
-}

lib/test2600.cal

@@ -491,25 +491,3 @@ define test2600(verbose, tnum)
 	}
 	return tnum;
 }
-
-if (config("lib_debug") >= 0) {
-	print "global defaultverbose defined";
-	print "global err defined";
-	print "testismult(str,n,verbose) defined";
-	print "testsqrt(str,n,eps,verbose) defined";
-	print "testexp(str,n,eps,verbose) defined";
-	print "testln(str,n,eps,verbose) defined";
-	print "testpower(str,n,b,eps,verbose) defined";
-	print "testgcd(str,n,verbose) defined";
-	print "cpow(x,n,eps) defined";
-	print "cexp(x,eps) defined";
-	print "cln(x,eps) defined";
-	print "mkreal() defined";
-	print "mkcomplex() defined";
-	print "mkbigreal() defined";
-	print "mksmallreal() defined";
-	print "testappr(str,n,verbose) defined";
-	print "checkappr(x,y,z,verbose) defined";
-	print "checkresult(x,y,z,a) defined";
-	print "test2600(verbose,tnum) defined";
-}

lib/test2700.cal

@@ -308,23 +308,3 @@ define test2700(verbose, tnum)
 	}
 	return tnum;
 }
-
-if (config("lib_debug") >= 0) {
-	print "global defaultverbose defined";
-	print "global err defined";
-	print "mknonnegreal() defined";
-	print "mkposreal() defined";
-	print "mkreal_2700() defined";
-	print "mknonzeroreal() defined";
-	print "mkposfrac() defined";
-	print "mkfrac() defined";
-	print "mksquarereal() defined";
-	print "mknonsquarereal() defined";
-	print "mkcomplex_2700() defined";
-	print "testcsqrt(str,n,verbose) defined";
-	print "checksqrt(x,y,z,v) defined";
-	print "checkavrem(A,B,X,eps) defined";
-	print "checkrounding(s,n,t,u,z) defined";
-	print "iscomsq(x) defined";
-	print "test2700(verbose,tnum) defined";
-}

lib/test3100.cal

@@ -17,14 +17,3 @@ define res_mul(a,b) {local obj res v = {(a.r * b.r) % md}; return v;};
 define res_neg(a) {local obj res v = {(-a.r) % md}; return v;};
 define res_inv(a) {local obj res v = {minv(a.r, md)}; return v;};
 define res(x) {local obj res v = {x % md}; return v;};
-
-if (config("lib_debug") >= 0) {
-	print "obj res defined";
-	print "global md defined";
-	print "res_test(a) defined";
-	print "res_sub(a, b) defined";
-	print "res_mul(a, b) defined";
-	print "res_neg(a) defined";
-	print "res_inv(a) defined";
-	print "res(x) defined";
-}

lib/test3300.cal

@@ -122,11 +122,3 @@ define test3300(verbose, tnum)
 	}
 	return tnum;
 }
-
-if (config("lib_debug") >= 0) {
-	print "global defaultverbose defined";
-	print "global err defined";
-	print "testi(str, n, N, verbose) defined";
-	print "testr(str, n, N, verbose) defined";
-	print "test3300(verbose, tnum) defined";
-}

lib/test3400.cal

@@ -299,15 +299,3 @@ define test3400(verbose, tnum)
 	}
 	return tnum;
 }
-
-if (config("lib_debug") >= 0) {
-	print "global defaultverbose defined";
-	print "global err defined";
-	print "test3401(str, n, eps, verbose) defined";
-	print "test3402(str, n, eps, verbose) defined";
-	print "test3403(str, n, eps, verbose) defined";
-	print "test3404(str, n, eps, verbose) defined";
-	print "test3405(str, n, eps, verbose) defined";
-	print "test3406(str, n, eps, verbose) defined";
-	print "test3400(verbose, tnum) defined";
-}

lib/test3500.cal

@@ -272,14 +272,3 @@ define test3500(verbose, tnum, n, N)
 	}
 	return tnum;
 }
-
-if (config("lib_debug") >= 0) {
-	print "global defaultverbose defined";
-	print "global err defined";
-	print "testfrem(x, y, verbose) defined";
-	print "testgcdrem(x, y, verbose) defined";
-	print "testf(str, n, verbose) defined";
-	print "testg(str, n, verbose) defined";
-	print "testh(str, n, N, verbose) defined";
-	print "test3500(verbose, n, N) defined";
-}

lib/test4000.cal

@@ -452,32 +452,3 @@ define test4000(v, tnum)
 	}
 	return tnum;
 }
-
-
-if (config("lib_debug") >= 0) {
-	print "global defaultverbose";
-	print "global err";
-	print "global BASEB";
-	print "global BASE";
-	print "global COUNT";
-	print "global SKIP";
-	print "global RESIDUE";
-	print "global MODULUS";
-	print "global K1";
-	print "global H1";
-	print "global K2";
-	print "global H2";
-	print "global K3";
-	print "global H3";
-	print "plen(N) defined";
-	print "clen(N) defined";
-	print "ptimes(str, N, n, count, skip, verbose) defined";
-	print "ctimes(str, N, n, count, skip, verbose) defined";
-	print "crtimes(str, a, b, n, count, skip, verbose) defined";
-	print "ntimes(str, N, n, count, skip, residue, mod, verbose) defined";
-	print "testnextcand(str, N, n, cnt, skip, res, mod, verbose) defined";
-	print "testnext1(x, y, count, skip, residue, modulus) defined";;
-	print "testprevcand(str, N, n, cnt, skip, res, mod, verbose) defined";
-	print "testprev1(x, y, count, skip, residue, modulus) defined";
-	print "test4000(verbose, tnum) defined";
-}

lib/test4100.cal

@@ -472,20 +472,3 @@ define test4100(v, tnum)
 	}
 	return tnum;
 }
-
-if (config("lib_debug") >= 0) {
-	print "global defaultverbose";
-	print "global err";
-	print "global K1";
-	print "global K2";
-	print "global BASEB";
-	print "global BASE";
-	print "rlen_4100(N) defined";
-	print "olen(N) defined";
-	print "test4101(x, y, m, k, z1, z2) defined";
-	print "testall(str, n, N, M, verbose) defined";
-	print "times(str, N, n, verbose) defined";
-	print "powtimes(str, N1, N2, n, verbose) defined";
-	print "inittimes(str, N, n, verbose) defined";
-	print "test4100(verbose, tnum) defined";
-}

lib/test4600.cal

@@ -223,6 +223,11 @@ define ttest(str, m, n, verbose)
 			return 1;
 		}
 	}
+	if (iserror(fclose(f))) {
+		print 'failed';
+		printf("**** Failure 6 for i = %d\n", i);
+		return 1;
+	}
 	i = rm("junk4600");
 	if (verbose > 0) {
 		printf("passed\n");
@@ -299,12 +304,3 @@ define test4600(v, tnum)
 	}
 	return tnum;
 }
-
-if (config("lib_debug") >= 0) {
-	print "stest(str [, verbose]) defined";
-	print "ttest([m, [n [,verbose]]]) defined";
-	print "sprint(x) defined";
-	print "findline(f,s) defined";
-	print "findlineold(f,s) defined";
-	print "test4600(verbose, tnum) defined";
-}

lib/test5100.cal

@@ -48,9 +48,3 @@ define test5100(x)
 	}
 	global a5100 = a5100, b5100 = b5100;
 }
-
-if (config("lib_debug") >= 0) {
-	print "global a5100";
-	print "global b5100";
-	print "test5100(x) defined";
-}

lib/test5200.cal

@@ -30,11 +30,3 @@ static a5200 = 20;
 define f5200(x) = a5200 + x;
 define g5200(x) {global a5200 = 30; return a5200 + x;}
 define h5200(x) = a5200 + x;
-
-if (config("lib_debug") >= 0) {
-	print "global a5200";
-	print "static a5200";
-	print "f5200(x) defined";
-	print "g5200(x) defined";
-	print "h5200(x) defined";
-}