Files
calc/custom/Makefile
Landon Curt Noll 552252371f Disable parallel GNU make for now
Unfortunately due to the complex dependency issues between
Makefile, Makefile.ship and custom/Makefile, parallel GNU make
is NOT recommended.  Sorry (tm Canada) :)
2021-09-07 16:35:45 -07:00

1984 lines
55 KiB
Makefile

#!/bin/make
#
# custom - makefile for calc custom routines
#
# Copyright (C) 1999-2006,2014,2017-2018,2021 Landon Curt Noll
#
# SRC: Makefile via make -f Makefile.ship custom/Makefile
#
# The "# SRC: ... - ..." comment line above indicates
# the origin of this file.
#
# IMPORTANT: Please see the section on Makefiles near the
# bottom of the HOWTO.INSTALL file.
#
# Calc is open software; you can redistribute it and/or modify it under
# the terms of the version 2.1 of the GNU Lesser General Public License
# as published by the Free Software Foundation.
#
# Calc is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General
# Public License for more details.
#
# A copy of version 2.1 of the GNU Lesser General Public License is
# distributed with calc under the filename COPYING-LGPL. You should have
# received a copy with calc; if not, write to Free Software Foundation, Inc.
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# Under source code control: 1997/03/09 02:28:54
# File existed as early as: 1997
#
# chongo <was here> /\oo/\ http://www.isthe.com/chongo/
# Share and enjoy! :-) http://www.isthe.com/chongo/tech/comp/calc/
#
# calculator by David I. Bell with help/mods from others
# Makefile by Landon Curt Noll
####################################################
# NOTE: Start of section from custom/Makefile.head #
####################################################
#.###############################################################.#
#.# #.#
#.# WARNING: This Makefile is generated from a combination of #.#
#.# custom/Makefile.head, Makefile.ship, and #.#
#.# custom/Makefile.tail. We recommend that you NOT #.#
#.# edit this file, but instead edit the proper source #.#
#.# file and then make custom/Makefile: #.#
#.# #.#
#.# make custom/Makefile #.#
#.# #.#
#.# See the '# NOTE .. section from ..' lines for #.#
#.# where the source file for the lines are from. #.#
#.# #.#
#.###############################################################.#
# The shell used by this Makefile
#
# On some systems, /bin/sh is a rather reduced shell with
# deprecated behavior.
#
# If your system has a up to date, bash shell, then
# you may wish to use:
#
# SHELL= /bin/bash
#
# On some systems such as macOS, the bash shell is very
# far behind to the point where is cannot be depended on.
# On such systems, the zsh may be a much better alternative
# shell for this Makefile to use:
#
# SHELL= /bin/zsh
#
SHELL= /bin/sh
#SHELL= /bin/bash
#SHELL= /bin/zsh
# PREFIX - Top level location for calc
#
# The PREFIX is often prepended to paths within calc and calc Makefiles.
#
# Starting with calc v2.13.0.1, nearly all Makefile places that used
# /usr/local now use ${PREFIX}. An exception is the olduninstall rule
# and, of course, this section. :-)
#
# NOTE: The ${PREFIX} is not the same as ${T}. The ${T} specifies
# a top level directory under which calc installs things.
# While usually ${T} is empty, it can be specific path
# as if calc where "chrooted" during an install.
# The ${PREFIX} value, during install, is a path between
# the top level ${T} install directory and the object
# such as an include file.
#
# NOTE: See also, ${T}, below.
#
# There are some paths that do NOT call under ${PREFIX}, such as
# ${CALCPATH}, that include paths not under ${PREFIX}, but those
# too are exceptions to this general rule.
#
# When in doubt, try:
#
# PREFIX= /usr/local
#
PREFIX= /usr/local
#PREFIX= /usr
#PREFIX= /usr/global
# CCBAN is given to ${CC} in order to control if banned.h is in effect.
#
# The banned.h attempts to ban the use of certain dangerous functions
# that, if improperly used, could compromise the computational integrity
# if calculations.
#
# In the case of calc, we are motivated in part by the desire for calc
# to correctly calculate: even during extremely long calculations.
#
# If UNBAN is NOT defined, then calling certain functions
# will result in a call to a non-existent function (link error).
#
# While we do NOT encourage defining UNBAN, there may be
# a system / compiler environment where re-defining a
# function may lead to a fatal compiler complication.
# If that happens, consider compiling as:
#
# make clobber all chk CCBAN=-DUNBAN
#
# as see if this is a work-a-round.
#
# If YOU discover a need for the -DUNBAN work-a-round, PLEASE tell us!
# Please send us a bug report. See the file:
#
# BUGS
#
# or the URL:
#
# http://www.isthe.com/chongo/tech/comp/calc/calc-bugrept.html
#
# for how to send us such a bug report.
#
CCBAN= -UUNBAN
#CCBAN= -DUNBAN
#if 0 /* start of skip for non-Gnu makefiles */
# Unfortunately due to the complex dependency issues between
# Makefile, Makefile.ship and custom/Makefile, parallel GNU make
# is NOT recommended. Sorry.
#
.NOTPARALLEL:
##############################################################################
#-=-=-=-=-=-=-=-=- Identify the target machine, if possible -=-=-=-=-=-=-=-=-#
##############################################################################
# NOTE: You can force a target value by defining target as in:
#
# make ...__optional_arguments_... target=value
# Try uname -s if the target was not already set on the make command line
#
ifeq ($(target),)
target=$(shell uname -s 2>/dev/null)
endif
#endif /* end of skip for non-Gnu makefiles */
##############################################################################
#-=-=-=-=-=-=-=-=- You may want to change some values below -=-=-=-=-=-=-=-=-#
##############################################################################
# The custom calc resource files to install
#
# Put your custom calc resource files here.
#
CUSTOM_CALC_FILES= argv.cal halflen.cal pzasusb8.cal pmodm127.cal register.cal
# The custom help files to install
#
# Put your custom help files here.
#
CUSTOM_HELP= argv devnull help sysinfo pzasusb8 pmodm127 register
# Any .h files that are needed by programs that use
# libcustcalc${LIB_EXT_VERSION}
#
# Put any .h files that you add which might be useful to other
# programs here.
#
CUSTOM_H_SRC=
# Any .c files that are needed to build libcustcalc${LIB_EXT_VERSION}.
#
# Don't put ${REQUIRED_SRC} files in this list.
#
# There MUST be a .c in CUSTOM_SRC for every .o in CUSTOM_OBJ.
#
# Put your custom .c files here.
#
CUSTOM_SRC= c_argv.c c_devnull.c c_help.c c_sysinfo.c c_pzasusb8.c \
c_pmodm127.c c_register.c
# Any .o files that are needed by program that use
# libcustcalc${LIB_EXT_VERSION}.
#
# Don't put ${REQUIRED_OBJ} files in this list.
#
# There MUST be a .c in CUSTOM_SRC for every .o in CUSTOM_OBJ.
#
# Put your custom .o files here.
#
CUSTOM_OBJ= c_argv.o c_devnull.o c_help.o c_sysinfo.o c_pzasusb8.o \
c_pmodm127.o c_register.o
##############################################################################
#-=-=-=-=-=-=- Defaults in case you want to build from this dir -=-=-=-=-=-=-#
##############################################################################
# Normally, the upper level makefile will set these values. We provide
# a default here just in case you want to build from this directory.
# Makefile debug
#
# Q=@ do not echo internal Makefile actions (quiet mode)
# Q= echo internal Makefile actions (debug / verbose mode)
#
# H=@: do not report hsrc file formation progress
# H=@ do echo hsrc file formation progress
#
# S= >/dev/null 2>&1 slience ${CC} output during hsrc file formation
# S= full ${CC} output during hsrc file formation
#
# E= 2>/dev/null slience command stderr during hsrc file formation
# E= full command stderr during hsrc file formation
#
# V=@: do not echo debug statements (quiet mode)
# V=@ do echo debug statements (debug / verbose mode)
#
#Q=
Q=@
#
S= >/dev/null 2>&1
#S=
#
E= 2>/dev/null
#E=
#
#H=@:
H=@
#
V=@:
#V=@
####
# Normally, the upper level makefile will set these values. We provide
# a default here just in case you want to build from this directory.
####
# Where the system include (.h) files are kept
#
# For DJGPP, select:
#
# INCDIR= /dev/env/DJDIR/include
#
# If in doubt, set:
#
# INCDIR= /usr/include
#
#INCDIR= ${PREFIX}/include
#INCDIR= /dev/env/DJDIR/include
INCDIR= /usr/include
# where to install calc related things
#
# ${BINDIR} where to install calc binary files
# ${LIBDIR} where calc link library (*.a) files are installed
# ${CALC_SHAREDIR} where to install calc help, .cal, startup, config files
#
# NOTE: The install rule prepends installation paths with ${T}, which
# by default is empty. If ${T} is non-empty, then installation
# locations will be relative to the ${T} directory.
#
# For DJGPP, select:
#
# BINDIR= /dev/env/DJDIR/bin
# LIBDIR= /dev/env/DJDIR/lib
# CALC_SHAREDIR= /dev/env/DJDIR/share/calc
#
# If in doubt, set:
#
# BINDIR= /usr/bin
# LIBDIR= /usr/lib
# CALC_SHAREDIR= /usr/share/calc
#
#BINDIR= ${PREFIX}/bin
#BINDIR= /dev/env/DJDIR/bin
BINDIR= /usr/bin
#LIBDIR= ${PREFIX}/lib
#LIBDIR= /dev/env/DJDIR/lib
LIBDIR= /usr/lib
#CALC_SHAREDIR= ${PREFIX}/lib/calc
#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
CALC_SHAREDIR= /usr/share/calc
# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
# ---------------------------------------------------------------
# ${HELPDIR} where the help directory is installed
# ${CALC_INCDIR} where the calc include files are installed
# ${CUSTOMCALDIR} where custom *.cal files are installed
# ${CUSTOMHELPDIR} where custom help files are installed
# ${CUSTOMINCDIR} where custom .h files are installed
# ${SCRIPTDIR} where calc shell scripts are installed
#
# NOTE: The install rule prepends installation paths with ${T}, which
# by default is empty. If ${T} is non-empty, then installation
# locations will be relative to the ${T} directory.
#
# If in doubt, set:
#
# HELPDIR= ${CALC_SHAREDIR}/help
# CALC_INCDIR= ${INCDIR}/calc
# CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
# CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
# CUSTOMINCDIR= ${CALC_INCDIR}/custom
# SCRIPTDIR= ${BINDIR}/cscript
#
HELPDIR= ${CALC_SHAREDIR}/help
CALC_INCDIR= ${INCDIR}/calc
CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
CUSTOMINCDIR= ${CALC_INCDIR}/custom
SCRIPTDIR= ${BINDIR}/cscript
# T - top level directory under which calc will be installed
#
# The calc install is performed under ${T}, the calc build is
# performed under /. The purpose for ${T} is to allow someone
# to install calc somewhere other than into the system area.
#
# For example, if:
#
# BINDIR= /usr/bin
# LIBDIR= /usr/lib
# CALC_SHAREDIR= /usr/share/calc
#
# and if:
#
# T= /var/tmp/testing
#
# Then the installation locations will be:
#
# calc binary files: /var/tmp/testing/usr/bin
# calc link library: /var/tmp/testing/usr/lib
# calc help, .cal ...: /var/tmp/testing/usr/share/calc
# ... etc ... /var/tmp/testing/...
#
# If ${T} is empty, calc is installed under /, which is the same
# top of tree for which it was built. If ${T} is non-empty, then
# calc is installed under ${T}, as if one had to chroot under
# ${T} for calc to operate.
#
# If in doubt, use T=
#
T=
# Debug/Optimize options for ${CC} and ${LCC}
#
# Select DEBUG= -O2 -gstabs+ -DWINDOZ for DJGPP.
#
#DEBUG=
#
#DEBUG= -O
#DEBUG= -O -g
#DEBUG= -O -g3
#
#DEBUG= -O1
#DEBUG= -O1 -g
#DEBUG= -O1 -g3
#
#DEBUG= -O2
#DEBUG= -O2 -g
#DEBUG= -O2 -g3
#DEBUG= -O2 -ipa
#DEBUG= -O2 -g3 -ipa
#
#DEBUG= -O3
#DEBUG= -O3 -g
DEBUG= -O3 -g3
#DEBUG= -O3 -ipa
#DEBUG= -O3 -g3 -ipa
#
#DEBUG= -g
#DEBUG= -g3
#DEBUG= -gx
#DEBUG= -WM,-g
#
#DEBUG= -O2 -gstabs+ -DWINDOZ
# Some systems require one to use ranlib to add a symbol table to
# a *.a link library. Set RANLIB to the utility that performs this
# action. Set RANLIB to : if your system does not need such a utility.
#
RANLIB=ranlib
#RANLIB=:
# Normally certain files depend on the Makefile. If the Makefile is
# changed, then certain steps should be redone. If MAKE_FILE is
# set to Makefile, then these files will depend on Makefile. If
# MAKE_FILE is empty, then they wont.
#
# If in doubt, set MAKE_FILE to Makefile
#
MAKE_FILE= Makefile
#MAKE_FILE=
# Controlling file makefile basename (without the path)
#
# This is the basename same of the makefile that may/does/will drive
# this makefile.
#
# If in doubt, set TOP_MAKE_FILE to Makefile
#
TOP_MAKE_FILE= Makefile
# If you do not wish to use purify, set PURIFY to an empty string.
#
# If in doubt, use PURIFY=
#
#PURIFY= purify
#PURIFY= purify -m71-engine
#PURIFY= purify -logfile=pure.out
#PURIFY= purify -m71-engine -logfile=pure.out
PURIFY=
# If you want to use a debugging link library such as a malloc debug link
# library, or need to add special ld flags after the calc link libraries
# are included, set ${LD_DEBUG} below.
#
# If in doubt, set LD_DEBUG to empty.
#
#LD_DEBUG= -lmalloc_cv
LD_DEBUG=
# When doing a:
#
# make check
# make chk
# make debug
#
# the ${CALC_ENV} is used to supply the proper environment variables
# to calc. Most people will simply need 'CALCPATH=./cal' to ensure
# that these debug rules will only use calc resource files under the
# local source directory. The longer lines (with MALLOC_VERBOSE=1 ...)
# are useful for SGI IRIX people who have 'WorkShop Performance Tools'
# and who also set 'LD_DEBUG= -lmalloc_cv' above.
#
# If in doubt, use CALC_ENV= CALCPATH=./cal.
#
CALC_ENV= CALCPATH=./cal
#CALC_ENV= CALCPATH=./cal MALLOC_VERBOSE=1 MALLOC_TRACING=1 \
# MALLOC_FASTCHK=1 MALLOC_FULLWARN=1
#CALC_ENV= CALCPATH=./cal MALLOC_VERBOSE=1 MALLOC_TRACING=1 \
# MALLOC_FASTCHK=1 MALLOC_FULLWARN=1 MALLOC_CLEAR_FREE=1 \
# MALLOC_CLEAR_MALLOC=1
# By default, custom builtin functions may only be executed if calc
# is given the -C option. This is because custom builtin functions
# may invoke non-standard or non-portable code. One may completely
# disable custom builtin functions by not compiling any of code
#
# ALLOW_CUSTOM= -DCUSTOM # allow custom only if -C is given
# ALLOW_CUSTOM= # disable custom even if -C is given
#
# If in doubt, use ALLOW_CUSTOM= -DCUSTOM
#
ALLOW_CUSTOM= -DCUSTOM
#ALLOW_CUSTOM=
# Some out of date operating systems require / want an executable to
# end with a certain file extension. Some compile systems such as
# Cygwin build calc as calc.exe. The EXT variable is used to denote
# the extension required by such.
#
# EXT= # normal Un*x / Linux / GNU/Linux systems
# EXT=.exe # windoz / Cygwin
#
# If in doubt, use EXT=
#
EXT=
#EXT=.exe
# The default calc versions
#
VERSION= 2.14.0.0
# Names of shared libraries with versions
#
LIB_EXT= .so
LIB_EXT_VERSION= ${LIB_EXT}.${VERSION}
# standard tools
#
AR= ar
AWK= awk
CHMOD= chmod
CMP= cmp
CO= co
CP= cp
FMT= fmt
GREP= egrep
LN= ln
MAKE= make
MAKEDEPEND= makedepend
MKDIR= mkdir
MV= mv
RM= rm
RMDIR= rmdir
SED= sed
SORT= sort
TOUCH= touch
TRUE= true
# EXTRA_CFLAGS are flags given to ${CC} when compiling C files
# EXTRA_LDFLAGS are flags given to ${CC} when linking progs
#
# Both CFLAGS and LDFLAGS are left blank in this Makefile by
# default so that users may use them on the make command line
# to always the way that C is compiled and files are linked
# respectively. For example:
#
# make all EXTRA_CFLAGS="-DMAGIC" EXTRA_LDFLAGS="-lmagic"
#
# NOTE: These should be left blank in this Makefile to make it
# easier to add stuff on the command line. If you want to
# to change the way calc is compiled by this Makefile, change
# the appropriate host target section below or a flag above.
#
EXTRA_CFLAGS=
EXTRA_LDFLAGS=
# COMMON_CFLAGS are the common ${CC} flags used for all progs, both
# intermediate and final calc and calc related progs
#
COMMON_CFLAGS= -DCALC_SRC ${ALLOW_CUSTOM} ${CCWARN} ${CCMISC} ${EXTRA_CFLAGS}
# COMMON_LDFLAGS are the common flags used for linking all progs, both
# intermediate and final calc and calc related progs
#
COMMON_LDFLAGS= ${EXTRA_LDFLAGS}
###########################################
# Set the default compile flags for ${CC} #
###########################################
#if 0 /* start of skip for non-Gnu makefiles */
# Required flags to compile C files for calc
#
# ICFLAGS are given to ${CC} for intermediate progs used to help compile calc
# CFLAGS are given to ${CC} for calc progs other than intermediate progs
#
# NOTE: This does not work for: make-XYZ-only and BLD_TYPE != make-XYZ-only
#
ifeq ($(BLD_TYPE),calc-static-only)
ICFLAGS= ${COMMON_CFLAGS} ${CCBAN} ${CC_STATIC}
else
ICFLAGS= ${COMMON_CFLAGS} ${CCBAN} ${CC_SHARE}
endif
CFLAGS= ${ICFLAGS} ${CCOPT}
# Required flags to link files for calc
#
# ILDFLAGS for ${CC} in linking intermediate progs used to help compile calc
# LDFLAGS for ${CC} in linking calc progs other than intermediate progs
#
ILDFLAGS= ${COMMON_LDFLAGS}
LDFLAGS= ${LD_DEBUG} ${ILDFLAGS}
#endif /* end of skip for non-Gnu makefiles */
##################################################
# NOTE: End of section from custom/Makefile.head #
##################################################
# start of host target cut - Do not remove this line
###########################################################
# NOTE: Start of section from the middle of Makefile.ship #
###########################################################
##############################################################################
#-=-=-=-=-=- host target section - targets that override defaults -=-=-=-=-=-#
##############################################################################
# Common values set in targets
#
# BLD_TYPE determines if calc is built with static and/or dynamic libs.
# Set this value to one of:
#
# BLD_TYPE= calc-dynamic-only
# BLD_TYPE= calc-static-only
#
# CC_SHARE are flags given to ${CC} to build .o files suitable for shared libs
# DEFAULT_LIB_INSTALL_PATH is where calc programs look for calc shared libs
# LD_SHARE are common flags given to ${CC} to link with shared libraries
# LIBCALC_SHLIB are flags given to ${CC} to build libcalc shared libraries
# LIBCUSTCALC_SHLIB are flags given to ${CC} to build libcustcalc shared lib
#
# NOTE: The above 5 values are unused if BLD_TYPE= calc-static-only
#
# CC_STATIC are flags given to ${CC} to build .o files suitable for static libs
# LD_STATIC are common flags given to ${CC} to link with static libraries
# LIBCALC_STATIC are flags given to ${CC} to build libcalc static libraries
# LIBCUSTCALC_STATIC are flags given to ${CC} to build libcustcalc static lib
#
# NOTE: The above 4 values are unused if BLD_TYPE= calc-dynamic-only
#
# CCOPT are flags given to ${CC} for optimization
# CCWARN are flags given to ${CC} for warning message control
#
# The following are given to ${CC}:
#
# WNO_IMPLICT
# WNO_ERROR_LONG_LONG
# WNO_LONG_LONG
#
# when compiling special .o files that may need special compile options:
#
# NOTE: These flags simply turn off certain compiler warnings,
# which is useful only when CCWERR is set to -Werror.
#
# NOTE: If your compiler does not have these -Wno files, just
# set these variables to nothing as in:
#
# WNO_IMPLICT=
# WNO_ERROR_LONG_LONG=
# WNO_LONG_LONG=
#
# CCWERR are flags given to ${CC} to make warnings fatal errors
# NOTE: CCWERR is only set in development Makefiles and must only be
# used with ${CC}, not ${LCC}. If you do not want the compiler
# to abort on warnings, then leave CCWERR blank.
# CCMISC are misc flags given to ${CC}
#
# CCBAN is given to ${CC} in order to control if banned.h is in effect.
# NOTE: See where CCBAN is defined above for details.
#
# LCC is how the C compiler is invoked on locally executed intermediate programs
# CC is how the C compiler is invoked (with an optional Purify)
#
# Specific target overrides or modifications to default values
##########################################################################
# NOTE: If your target is not supported below and the default target #
# is not suitable for your needs, please send to the: #
# #
# calc-contrib at asthe dot com #
# #
# Email address an "ifeq ($(target),YOUR_TARGET_NAME)" ... "endif" #
# set of lines so that we can consider them for the next release. #
##########################################################################
#if 0 /* start of skip for non-Gnu makefiles */
################
# Linux target #
################
ifeq ($(target),Linux)
#
BLD_TYPE= calc-dynamic-only
#
CC_SHARE= -fPIC
DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:${PREFIX}/lib
LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
"-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
ifdef ALLOW_CUSTOM
LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
else
LIBCUSTCALC_SHLIB=
endif
#
CC_STATIC=
LD_STATIC=
LIBCALC_STATIC=
LIBCUSTCALC_STATIC=
#
# If you want to add flags to all compiler and linker
# run (via ${COMMON_CFLAGS} and ${COMMON_LDFLAGS}),
# set ${COMMON_ADD}.
#
# For example to use gcc's -Werror to force warnings
# to become errors, call make with:
#
# make .. COMMON_ADD='-Werror'
#
# This facility requires a Gnu Makefile, or a make command
# that understands the += make operand.
#
COMMON_CFLAGS+= ${COMMON_ADD}
COMMON_LDFLAGS+= ${COMMON_ADD}
#
CCWARN= -Wall
WNO_IMPLICT= -Wno-implicit
WNO_ERROR_LONG_LONG= -Wno-error=long-long
WNO_LONG_LONG= -Wno-long-long
CCWERR=
CCOPT= ${DEBUG}
CCMISC=
#
LCC= gcc
CC= ${PURIFY} ${LCC} ${CCWERR}
#
endif
###############################
# Apple macOS / Darwin target #
###############################
ifeq ($(target),Darwin)
#
BLD_TYPE= calc-dynamic-only
#
CC_SHARE= -fPIC
DEFAULT_LIB_INSTALL_PATH= ${PWD}:${LIBDIR}:${PREFIX}/lib
LD_SHARE= ${DARWIN_ARCH}
#SET_INSTALL_NAME= no
SET_INSTALL_NAME= yes
ifeq ($(SET_INSTALL_NAME),yes)
LIBCALC_SHLIB= -single_module -undefined dynamic_lookup -dynamiclib \
-install_name ${LIBDIR}/libcalc${LIB_EXT_VERSION} ${DARWIN_ARCH}
else
LIBCALC_SHLIB= -single_module -undefined dynamic_lookup -dynamiclib \
${DARWIN_ARCH}
endif
ifdef ALLOW_CUSTOM
ifeq ($(SET_INSTALL_NAME),yes)
LIBCUSTCALC_SHLIB= -single_module -undefined dynamic_lookup -dynamiclib \
-install_name ${LIBDIR}/libcustcalc${LIB_EXT_VERSION} ${DARWIN_ARCH}
else
LIBCUSTCALC_SHLIB= -single_module -undefined dynamic_lookup -dynamiclib \
${DARWIN_ARCH}
endif
else
LIBCUSTCALC_SHLIB=
endif
#
CC_STATIC=
LD_STATIC= ${DARWIN_ARCH}
LIBCALC_STATIC=
LIBCUSTCALC_STATIC=
#
# If you want to add flags to all compiler and linker
# run (via ${COMMON_CFLAGS} and ${COMMON_LDFLAGS}),
# set ${COMMON_ADD}.
#
# For example to use clang's -fsanitize for calc testing,
# which requires a common set of flags to be passed to
# every compile and link, then call make with:
#
# make .. COMMON_ADD='-fsanitize=undefined -fsanitize=address'
#
# This facility requires a Gnu Makefile, or a make command
# that understands the += make operand.
#
COMMON_CFLAGS+= ${COMMON_ADD}
COMMON_LDFLAGS+= ${COMMON_ADD}
#
CCWARN= -Wall
WNO_IMPLICT= -Wno-implicit
WNO_ERROR_LONG_LONG= -Wno-error=long-long
WNO_LONG_LONG= -Wno-long-long
CCWERR=
CCOPT= ${DEBUG}
CCMISC= ${DARWIN_ARCH}
#
LCC= clang
CC= ${PURIFY} ${LCC} ${CCWERR}
#
# Darwin dynamic shared lib filenames
LIB_EXT:= .dylib
LIB_EXT_VERSION:= .${VERSION}${LIB_EXT}
# LDCONFIG not required on this platform, so we redefine it to an empty string
LDCONFIG:=
# DARWIN_ARCH= -arch i386 -arch ppc # Universal binary
# DARWIN_ARCH= -arch i386 # Intel binary
# DARWIN_ARCH= -arch ppc # PPC binary
# DARWIN_ARCH= -arch x86_64 # native 64-bit binary
DARWIN_ARCH= # native binary
endif
##################
# FreeBSD target #
##################
########################################################################
# NOTE: You MUST either use gmake (GNU Make) or you must try your luck #
# with Makefile.simple and custom/Makefile.simple versions. #
# See HOWTO.INSTALL for more information. #
########################################################################
ifeq ($(target),FreeBSD)
#
BLD_TYPE= calc-dynamic-only
#
CC_SHARE= -fPIC
DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:${PREFIX}/lib
LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
"-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
ifdef ALLOW_CUSTOM
LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
else
LIBCUSTCALC_SHLIB=
endif
#
CC_STATIC=
LD_STATIC=
LIBCALC_STATIC=
LIBCUSTCALC_STATIC=
#
# If you want to add flags to all compiler and linker
# run (via ${COMMON_CFLAGS} and ${COMMON_LDFLAGS}),
# set ${COMMON_ADD}.
#
# For example to use gcc's -Werror to force warnings
# to become errors, call make with:
#
# make .. COMMON_ADD='-Werror'
#
# This facility requires a Gnu Makefile, or a make command
# that understands the += make operand.
#
COMMON_CFLAGS+= ${COMMON_ADD}
COMMON_LDFLAGS+= ${COMMON_ADD}
#
CCWARN= -Wall
WNO_IMPLICT= -Wno-implicit
WNO_ERROR_LONG_LONG= -Wno-error=long-long
WNO_LONG_LONG= -Wno-long-long
CCWERR=
CCOPT= ${DEBUG}
CCMISC=
#
LCC= gcc
CC= ${PURIFY} ${LCC} ${CCWERR}
#
MAKE= gmake
#
endif
##################
# OpenBSD target #
##################
########################################################################
# NOTE: You MUST either use gmake (GNU Make) or you must try your luck #
# with Makefile.simple and custom/Makefile.simple versions. #
# See HOWTO.INSTALL for more information. #
########################################################################
ifeq ($(target),OpenBSD)
#
BLD_TYPE= calc-dynamic-only
#
CC_SHARE= -fPIC
DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:${PREFIX}/lib
LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
"-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
ifdef ALLOW_CUSTOM
LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
else
LIBCUSTCALC_SHLIB=
endif
#
CC_STATIC=
LD_STATIC=
LIBCALC_STATIC=
LIBCUSTCALC_STATIC=
#
# If you want to add flags to all compiler and linker
# run (via ${COMMON_CFLAGS} and ${COMMON_LDFLAGS}),
# set ${COMMON_ADD}.
#
# For example to use gcc's -Werror to force warnings
# to become errors, call make with:
#
# make .. COMMON_ADD='-Werror'
#
# This facility requires a Gnu Makefile, or a make command
# that understands the += make operand.
#
COMMON_CFLAGS+= ${COMMON_ADD}
COMMON_LDFLAGS+= ${COMMON_ADD}
#
CCWARN= -Wall
WNO_IMPLICT= -Wno-implicit
WNO_ERROR_LONG_LONG= -Wno-error=long-long
WNO_LONG_LONG= -Wno-long-long
CCWERR=
CCOPT= ${DEBUG}
CCMISC=
#
LCC= gcc
CC= ${PURIFY} ${LCC} ${CCWERR}
#
MAKE= gmake
#
endif
################
# SunOS target #
################
ifeq ($(target),SunOS)
#
BLD_TYPE= calc-dynamic-only
#
CC_SHARE= -fPIC
DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:${PREFIX}/lib
LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
"-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
ifdef ALLOW_CUSTOM
LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
else
LIBCUSTCALC_SHLIB=
endif
#
CC_STATIC=
LIBCALC_STATIC=
LIBCUSTCALC_STATIC=
LD_STATIC=
#
# If you want to add flags to all compiler and linker
# run (via ${COMMON_CFLAGS} and ${COMMON_LDFLAGS}),
# set ${COMMON_ADD}.
#
# For example to use gcc's -Werror to force warnings
# to become errors, call make with:
#
# make .. COMMON_ADD='-Werror'
#
# This facility requires a Gnu Makefile, or a make command
# that understands the += make operand.
#
COMMON_CFLAGS+= ${COMMON_ADD}
COMMON_LDFLAGS+= ${COMMON_ADD}
#
CCWARN= -Wall
WNO_IMPLICT= -Wno-implicit
WNO_ERROR_LONG_LONG= -Wno-error=long-long
WNO_LONG_LONG= -Wno-long-long
CCWERR=
CCOPT= ${DEBUG}
CCMISC=
#
LCC= gcc
CC= ${PURIFY} ${LCC} ${CCWERR}
#
endif
#################
# Cygwin target #
#################
ifeq ($(target),Cygwin)
#
BLD_TYPE= calc-static-only
#
CC_SHARE= -fPIC
DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:${PREFIX}/lib
LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
"-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
ifdef ALLOW_CUSTOM
LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
else
LIBCUSTCALC_SHLIB=
endif
#
CC_STATIC=
LIBCALC_STATIC=
LIBCUSTCALC_STATIC=
LD_STATIC=
#
# If you want to add flags to all compiler and linker
# run (via ${COMMON_CFLAGS} and ${COMMON_LDFLAGS}),
# set ${COMMON_ADD}.
#
# For example to use gcc's -Werror to force warnings
# to become errors, call make with:
#
# make .. COMMON_ADD='-Werror'
#
# This facility requires a Gnu Makefile, or a make command
# that understands the += make operand.
#
COMMON_CFLAGS+= ${COMMON_ADD}
COMMON_LDFLAGS+= ${COMMON_ADD}
#
CCWARN= -Wall
WNO_IMPLICT= -Wno-implicit
WNO_ERROR_LONG_LONG= -Wno-error=long-long
WNO_LONG_LONG= -Wno-long-long
CCWERR=
CCOPT= ${DEBUG}
CCMISC=
#
LCC= gcc
CC= ${PURIFY} ${LCC} ${CCWERR}
#
endif
#######################################################
# simple target - values used to form Makefile.simple #
#######################################################
# NOTE: This is not a real host target. The simple target
# exists only to form the Makefile.simple file.
ifeq ($(target),simple)
#endif /* end of skip for non-Gnu makefiles */
#
BLD_TYPE= calc-static-only
#
CC_SHARE= -fPIC
DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:${PREFIX}/lib
LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
"-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
#
CC_STATIC=
LD_STATIC=
LIBCALC_STATIC=
LIBCUSTCALC_STATIC=
#
CCWARN= -Wall
WNO_IMPLICT= -Wno-implicit
WNO_ERROR_LONG_LONG= -Wno-error=long-long
WNO_LONG_LONG= -Wno-long-long
CCWERR=
CCOPT= ${DEBUG}
CCMISC=
#
LCC= cc
CC= ${PURIFY} ${LCC} ${CCWERR}
#
# The simple makefile forces the use of static ${CC} flags
#
# ICFLAGS are given to ${CC} for intermediate programs used to help compile calc
# CFLAGS are given to ${CC} for calc programs other than intermediate programs
# ILDFLAGS for ${CC} in linking intermediate programs used to help compile calc
# LDFLAGS for ${CC} in linking calc programs other than intermediate programs
#
ICFLAGS= ${COMMON_CFLAGS} ${CCBAN} ${CC_STATIC}
CFLAGS= ${ICFLAGS} ${CCOPT}
#
ILDFLAGS= ${COMMON_LDFLAGS} ${LD_STATIC}
LDFLAGS= ${LD_DEBUG} ${ILDFLAGS} ${LIBCALC_STATIC} ${LIBCUSTCALC_STATIC}
#
#if 0 /* start of skip for non-Gnu makefiles */
endif
###################################################
# MINGW32_NT-5.0 target #
###################################################
ifeq ($(target),MINGW32_NT-5.0)
EXT=.exe
TERMCONTROL= -DUSE_WIN32
ifdef ALLOW_CUSTOM
#endif /* end of skip for non-Gnu makefiles */
CALCPATH= .;./cal;~/.cal;${T}${CALC_SHAREDIR};${T}${CUSTOMCALDIR}
#if 0 /* start of skip for non-Gnu makefiles */
else
CALCPATH= .;./cal;~/.cal;${T}${CALC_SHAREDIR}
endif
CALCRC= ./.calcinit;~/.calcrc;${CALC_SHAREDIR}/startup
#
BLD_TYPE= calc-static-only
#
CC_SHARE= -fPIC
DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:${PREFIX}/lib
LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
"-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
ifdef ALLOW_CUSTOM
LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
else
LIBCUSTCALC_SHLIB=
endif
#
CC_STATIC= -DSTATIC_ONLY
LIBCALC_STATIC=
LIBCUSTCALC_STATIC=
LD_STATIC=
#
CCWARN= -Wall
WNO_IMPLICT= -Wno-implicit
WNO_ERROR_LONG_LONG= -Wno-error=long-long
WNO_LONG_LONG= -Wno-long-long
CCWERR=
CCOPT= ${DEBUG}
CCMISC= -DNOTCYGWIN
#
LCC= gcc
CC= ${PURIFY} ${LCC} ${CCWERR}
#
endif
###################################################
# default target - when no specific target exists #
###################################################
# NOTE: This is the default generic host target. Used when no other
# host target matches.
ifeq ($(target),)
#
BLD_TYPE= calc-static-only
#
CC_SHARE= -fPIC
DEFAULT_LIB_INSTALL_PATH= ${PWD}:/lib:/usr/lib:${LIBDIR}:${PREFIX}/lib
LD_SHARE= "-Wl,-rpath,${DEFAULT_LIB_INSTALL_PATH}" \
"-Wl,-rpath-link,${DEFAULT_LIB_INSTALL_PATH}"
LIBCALC_SHLIB= -shared "-Wl,-soname,libcalc${LIB_EXT_VERSION}"
ifdef ALLOW_CUSTOM
LIBCUSTCALC_SHLIB= -shared "-Wl,-soname,libcustcalc${LIB_EXT_VERSION}"
else
LIBCUSTCALC_SHLIB=
endif
#
CC_STATIC=
LIBCALC_STATIC=
LIBCUSTCALC_STATIC=
LD_STATIC=
#
# If you want to add flags to all compiler and linker
# run (via ${COMMON_CFLAGS} and ${COMMON_LDFLAGS}),
# set ${COMMON_ADD}.
#
# For example to use gcc's -Werror to force warnings
# to become errors, call make with:
#
# make .. COMMON_ADD='-Werror'
#
# This facility requires a Gnu Makefile, or a make command
# that understands the += make operand.
#
COMMON_CFLAGS+= ${COMMON_ADD}
COMMON_LDFLAGS+= ${COMMON_ADD}
#
CCWARN= -Wall
WNO_IMPLICT= -Wno-implicit
WNO_ERROR_LONG_LONG= -Wno-error=long-long
WNO_LONG_LONG= -Wno-long-long
CCWERR=
CCOPT= ${DEBUG}
CCMISC=
#
LCC= gcc
CC= ${PURIFY} ${LCC} ${CCWERR}
#
endif
###########################################
# Set the default compile flags for ${CC} #
###########################################
# Required flags to compile C files for calc
#
# ICFLAGS are given to ${CC} for intermediate programs used to help compile calc
# CFLAGS are given to ${CC} for calc programs other than intermediate programs
#
# NOTE: This does not work for: make-XYZ-only and BLD_TYPE != make-XYZ-only
#
ifeq ($(BLD_TYPE),calc-static-only)
ICFLAGS= ${COMMON_CFLAGS} ${CCBAN} ${CC_STATIC}
else
ICFLAGS= ${COMMON_CFLAGS} ${CCBAN} ${CC_SHARE}
endif
CFLAGS= ${ICFLAGS} ${CCOPT}
# Required flags to link files for calc
#
# ILDFLAGS for ${CC} in linking intermediate programs used to help compile calc
# LDFLAGS for ${CC} in linking calc programs other than intermediate programs
#
ILDFLAGS= ${COMMON_LDFLAGS}
LDFLAGS= ${LD_DEBUG} ${ILDFLAGS}
#endif /* end of skip for non-Gnu makefiles */
#######################################################################
#-=-=-=-=-=- end of target section - only make rules below -=-=-=-=-=-#
#######################################################################
#########################################################
# NOTE: End of section from the middle of Makefile.ship #
#########################################################
# end of host target cut - Do not remove this line
#
# Copyright (C) 1999-2006,2014,2017-2018,2021 Landon Curt Noll
#
# SRC: Makefile via make -f Makefile.ship custom/Makefile
#
# The "# SRC: ... - ..." comment line above indicates
# the origin of this file.
#
# IMPORTANT: Please see the section on Makefiles near the
# bottom of the HOWTO.INSTALL file.
####################################################
# NOTE: Start of section from custom/Makefile.tail #
####################################################
##############################################################################
#-=-=-=-=-=-=-=-=- Be careful if you change something below -=-=-=-=-=-=-=-=-#
##############################################################################
# These .c files are required for the main custom interface and
# for the custom support functions for libcustcalc${LIB_EXT_VERSION}.
#
# There MUST be a .c for every .o in REQUIRED_OBJ.
#
REQUIRED_SRC= custtbl.c
# These .o files correspond to the .c files in REQUIRED_SRC
# for libcustcalc${LIB_EXT_VERSION}.
#
# There MUST be a .o for every .c in REQUIRED_SRC.
#
REQUIRED_OBJ= custtbl.o
# These .h files are installed under ${CUSTOMCALDIR} by the install rule.
#
INSTALL_H_SRC= ${CUSTOM_H_SRC}
# These .c files are used to form libcustcalc${LIB_EXT_VERSION}.
#
CUSTCALC_SRC= ${REQUIRED_SRC} ${CUSTOM_SRC}
# These .o files are used to form libcustcalc${LIB_EXT_VERSION}.
#
CUSTCALC_OBJ= ${REQUIRED_OBJ} ${CUSTOM_OBJ}
# These .c files are used to build the dependency list
#
C_SRC= ${REQUIRED_SRC} ${CUSTOM_SRC}
# These .h files are used to build the dependency list
#
H_SRC= ${CUSTOM_H_SRC}
# These files are found (but not built) in the distribution
#
# The CUSTOM_CAL and HOW_TO_ADD are files distributed from this
# directory but are installed as help files from the help/Makefile.
#
DISTLIST= ${CUSTCALC_SRC} ${CUSTOM_CALC_FILES} ${CUSTOM_HELP} \
${INSTALL_H_SRC} CUSTOM_CAL HOW_TO_ADD ${MAKE_FILE}.head \
${MAKE_FILE}.tail
# These files are used to make (but not built) a calc .a link library
#
CALCLIBLIST= ${CUSTCALC_SRC} ${INSTALL_H_SRC} ${MAKE_FILE} HOW_TO_ADD
# This is the custom dynamic shared library that is build
#
CALC_DYNAMIC_LIBCUSTCALC= libcustcalc${LIB_EXT_VERSION}
# This is the custom static library that is build
#
CALC_STATIC_LIBCUSTCALC= libcustcalc.a
# complete list of targets
#
TARGETS= ${BLD_TYPE} Makefile.simple
###
#
# The reason for this Makefile :-)
#
###
all: ${TARGETS} ${INSTALL_H_SRC} ${CUSTOM_CALC_FILES} \
${CUSTOM_HELP} ${MAKE_FILE} .all
calc-dynamic-only: ${CUSTCALC_OBJ} ${CALC_DYNAMIC_LIBCUSTCALC}
calc-static-only: ${CUSTCALC_OBJ} ${CALC_STATIC_LIBCUSTCALC}
custom/libcustcalc${LIB_EXT_VERSION}: libcustcalc${LIB_EXT_VERSION} \
${CALC_STATIC_LIBCUSTCALC}
libcustcalc${LIB_EXT_VERSION}: ${CUSTCALC_OBJ} ${MAKE_FILE}
${CC} ${LIBCUSTCALC_SHLIB} ${CUSTCALC_OBJ} -o $@
##
#
# Special .o files
#
##
c_sysinfo.o: c_sysinfo.c ${MAKE_FILE}
${CC} ${CFLAGS} c_sysinfo.c -c
##
#
# used by the upper level Makefile
#
##
# to determine of we have done all
#
.all:
${RM} -f .all
${TOUCH} .all
###
#
# building calc-static and static lib*.a libraries
#
###
libcustcalc.a: ${CUSTCALC_OBJ} ${MAKE_FILE}
${RM} -f libcustcalc.a
${AR} qc libcustcalc.a ${CUSTCALC_OBJ}
${RANLIB} libcustcalc.a
${CHMOD} 0644 libcustcalc.a
##
#
# File list generation. You can ignore this section.
#
#
# We will form the names of source files as if they were in a
# sub-directory called calc/lib.
#
# NOTE: Due to bogus shells found on one common system we must have
# an non-empty else clause for every if condition. *sigh*
#
##
distlist: ${DISTLIST}
${Q} for i in ${DISTLIST} /dev/null; do \
if [ X"$$i" != X"/dev/null" ]; then \
echo custom/$$i; \
fi; \
done
distdir:
${Q} echo custom
calcliblist: ${CALCLIBLIST}
${Q} for i in ${CALCLIBLIST} /dev/null; do \
if [ X"$$i" != X"/dev/null" ]; then \
echo custom/$$i; \
fi; \
done
#if 0 /* start of skip for non-Gnu makefiles */
Makefile.simple: ${MAKE_FILE}
${V} echo '=-=-=-=-= custom/${MAKE_FILE} start of $@ rule =-=-=-=-='
${Q} ${RM} -f $@
${Q} ${AWK} '/^#if 0/{skp=1} {if(!skp){print $$0}} /^#endif/{skp=0}' \
${MAKE_FILE} | \
${GREP} -v '#\.#' | \
${SED} -e 's;^# SRC:.*;# SRC: non-GNU Makefile via;' \
-e 's;via$$;via ${MAKE} -f ${MAKE_FILE} custom/$@;' > $@
${Q} echo >> $@
${Q} echo 'Makefile.simple:' >> $@
${Q} echo ' $${Q} if [ ! -f Makefile.simple ]; then '"\\" >> $@
${Q} echo ' $${CP} -f $${MAKE_FILE} $$@; fi' >> $@
${V} echo '=-=-=-=-= custom/${MAKE_FILE} end of $@ rule =-=-=-=-='
#endif /* end of skip for non-Gnu makefiles */
##
#
# Home grown make dependency rules. Your system make not support
# or have the needed tools. You can ignore this section.
#
# We will form a skeleton tree of *.c files containing only #include "foo.h"
# lines and .h files containing the same lines surrounded by multiple include
# prevention lines. This allows us to build a static depend list that will
# satisfy all possible cpp symbol definition combinations.
#
##
depend:
${Q} if [ -f ${MAKE_FILE}.bak ]; then \
echo "custom/${MAKE_FILE}.bak exists, remove or move it"; \
exit 1; \
else \
${TRUE}; \
fi
${Q} echo forming custom/skel
${Q} ${RM} -rf skel
${Q} ${MKDIR} -p skel
${Q} ${MKDIR} -p skel/custom
-${Q} for i in ${C_SRC} /dev/null; do \
if [ X"$$i" != X"/dev/null" ]; then \
${SED} -n '/^#[ ]*include[ ]*"/p' \
"$$i" > "skel/custom/$$i"; \
fi; \
done
-${Q} for i in ${H_SRC} /dev/null; do \
if [ "$$i" = "/dev/null" ]; then continue; fi; \
tag="`echo $$i | ${SED} 's/[\.+,:]/_/g'`"; \
echo "#if !defined($$tag)" > "skel/custom/$$i"; \
echo "#define $$tag" >> "skel/custom/$$i"; \
${SED} -n '/^#[ ]*include[ ]*"/p' "$$i" \
>> "skel/custom/$$i"; \
echo '#endif /* '"$$tag"' */' >> "skel/custom/$$i"; \
done
${Q} (cd ..; ${MAKE} -f ${TOP_MAKE_FILE} hsrc)
${MAKE} -f ../${TOP_MAKE_FILE} h_list 2>/dev/null | \
while read i; do \
if [ ! -f "../$$i" ]; then continue; fi; \
tag="`echo $$i | ${SED} 's/[\.+,:]/_/g'`"; \
echo "#if !defined($$tag)" > "skel/$$i"; \
echo "#define $$tag" >> "skel/$$i"; \
${SED} -n '/^#[ ]*include[ ]*"/p' "../$$i" \
>> "skel/$$i"; \
echo '#endif /* '"$$tag"' */' >> "skel/$$i"; \
done
${Q} ${RM} -f skel/custom/makedep.out
${Q} echo custom/skel formed
${Q} echo forming custom dependency list
${Q} :> skel/custom/makedep.out
${Q} cd skel/custom; ${MAKEDEPEND} \
-I../../.. -w 1 -f makedep.out -- \
${CFLAGS} -- \
${C_SRC} 2>/dev/null
${Q} ${SED} -e 's|: ../../|: |' -E -i '' -l skel/custom/makedep.out
-${Q} for i in ${C_SRC} /dev/null; do \
if [ X"$$i" != X"/dev/null" ]; then \
echo "$$i" | ${SED} 's/^\(.*\)\.c/\1.o: \1.c/'; \
fi; \
done >> skel/custom/makedep.out
${Q} LANG=C ${SORT} -u skel/custom/makedep.out \
-o skel/custom/makedep.out
${Q} echo custom dependency list formed
${Q} echo forming new custom/${MAKE_FILE}
${Q} ${RM} -f ${MAKE_FILE}.bak
${Q} ${MV} ${MAKE_FILE} ${MAKE_FILE}.bak
${Q} ${SED} -n '1,/^# DO NOT DELETE THIS LINE/p' \
${MAKE_FILE}.bak > ${MAKE_FILE}
${Q} ${GREP} -v '^#' skel/custom/makedep.out >> ${MAKE_FILE}
${Q} echo removing skel
${Q} ${RM} -rf skel
-${Q} if ${CMP} -s ${MAKE_FILE}.bak ${MAKE_FILE}; then \
echo 'custom/${MAKE_FILE} was already up to date'; \
echo 'restoring original custom/${MAKE_FILE}'; \
${MV} -f ${MAKE_FILE}.bak ${MAKE_FILE}; \
else \
echo 'old custom/${MAKE_FILE} is now custom/${MAKE_FILE}.bak'; \
echo 'new custom/${MAKE_FILE} formed'; \
echo 'try: diff -u custom/${MAKE_FILE}.bak custom/${MAKE_FILE}'; \
fi
##
#
# rpm rules
#
##
echo_inst_files:
${Q} for i in ${INSTALL_H_SRC} /dev/null; do \
if [ X"$$i" != X"/dev/null" ]; then \
echo __file__ ${CUSTOMINCDIR}/$$i; \
fi; \
done
${Q} for i in ${CUSTOM_HELP} /dev/null; do \
if [ X"$$i" != X"/dev/null" ]; then \
echo __file__ ${CUSTOMHELPDIR}/$$i; \
fi; \
done
${Q} for i in ${CUSTOM_CALC_FILES} /dev/null; do \
if [ X"$$i" != X"/dev/null" ]; then \
echo __file__ ${CUSTOMCALDIR}/$$i; \
fi; \
done
${Q} for i in ${CALC_DYNAMIC_LIBCUSTCALC} /dev/null; do \
if [ X"$$i" != X"/dev/null" ]; then \
echo __file__ ${CUSTOMCALDIR}/$$i; \
fi; \
done
##
#
# Utility rules
#
##
clean:
${RM} -f ${CUSTCALC_OBJ}
clobber: clean
${RM} -f ${BLD_TYPE}
${RM} -f .all ${MAKE_FILE}.tmp ${MAKE_FILE}.bak
${RM} -f libcustcalc${LIB_EXT_VERSION}
${RM} -f libcustcalc${LIB_EXT}
${RM} -f libcustcalc.a
${RM} -f libcustcalc*
${RM} -rf skel
${V} echo remove files that are obsolete
#if 0 /* start of skip for non-Gnu makefiles */
${RM} -f Makefile.simple
#endif /* end of skip for non-Gnu makefiles */
-${Q} if [ -e .DS_Store ]; then \
echo ${RM} -rf .DS_Store; \
${RM} -rf .DS_Store; \
fi
# install everything
#
# NOTE: Keep the uninstall rule in reverse order to the install rule
#
install: all
-${Q} if [ ! -d ${T}${LIBDIR} ]; then \
echo ${MKDIR} -p ${T}${LIBDIR}; \
${MKDIR} -p ${T}${LIBDIR}; \
if [ ! -d "${T}${LIBDIR}" ]; then \
echo ${MKDIR} -p "${T}${LIBDIR}"; \
${MKDIR} -p "${T}${LIBDIR}"; \
fi; \
echo ${CHMOD} 0755 ${T}${LIBDIR}; \
${CHMOD} 0755 ${T}${LIBDIR}; \
else \
${TRUE}; \
fi
-${Q} if [ ! -d ${T}${INCDIR} ]; then \
echo ${MKDIR} -p ${T}${INCDIR}; \
${MKDIR} -p ${T}${INCDIR}; \
if [ ! -d "${T}${INCDIR}" ]; then \
echo ${MKDIR} -p "${T}${INCDIR}"; \
${MKDIR} -p "${T}${INCDIR}"; \
fi; \
echo ${CHMOD} 0755 ${T}${INCDIR}; \
${CHMOD} 0755 ${T}${INCDIR}; \
else \
${TRUE}; \
fi
-${Q} if [ ! -d ${T}${CALC_SHAREDIR} ]; then \
echo ${MKDIR} -p ${T}${CALC_SHAREDIR}; \
${MKDIR} -p ${T}${CALC_SHAREDIR}; \
if [ ! -d "${T}${CALC_SHAREDIR}" ]; then \
echo ${MKDIR} -p "${T}${CALC_SHAREDIR}"; \
${MKDIR} -p "${T}${CALC_SHAREDIR}"; \
fi; \
echo ${CHMOD} 0755 ${T}${CALC_SHAREDIR}; \
${CHMOD} 0755 ${T}${CALC_SHAREDIR}; \
else \
${TRUE}; \
fi
-${Q} if [ ! -d ${T}${CALC_INCDIR} ]; then \
echo ${MKDIR} -p ${T}${CALC_INCDIR}; \
${MKDIR} -p ${T}${CALC_INCDIR}; \
if [ ! -d "${T}${CALC_INCDIR}" ]; then \
echo ${MKDIR} -p "${T}${CALC_INCDIR}"; \
${MKDIR} -p "${T}${CALC_INCDIR}"; \
fi; \
echo ${CHMOD} 0755 ${T}${CALC_INCDIR}; \
${CHMOD} 0755 ${T}${CALC_INCDIR}; \
else \
${TRUE}; \
fi
-${Q} if [ ! -d ${T}${HELPDIR} ]; then \
echo ${MKDIR} -p ${T}${HELPDIR}; \
${MKDIR} -p ${T}${HELPDIR}; \
if [ ! -d "${T}${HELPDIR}" ]; then \
echo ${MKDIR} -p "${T}${HELPDIR}"; \
${MKDIR} -p "${T}${HELPDIR}"; \
fi; \
echo ${CHMOD} 0755 ${T}${HELPDIR}; \
${CHMOD} 0755 ${T}${HELPDIR}; \
else \
${TRUE}; \
fi
-${Q} if [ ! -d ${T}${CUSTOMCALDIR} ]; then \
echo ${MKDIR} -p ${T}${CUSTOMCALDIR}; \
${MKDIR} -p ${T}${CUSTOMCALDIR}; \
if [ ! -d "${T}${CUSTOMCALDIR}" ]; then \
echo ${MKDIR} -p "${T}${CUSTOMCALDIR}"; \
${MKDIR} -p "${T}${CUSTOMCALDIR}"; \
fi; \
echo ${CHMOD} 0755 ${T}${CUSTOMCALDIR}; \
${CHMOD} 0755 ${T}${CUSTOMCALDIR}; \
else \
${TRUE}; \
fi
-${Q} if [ ! -d ${T}${CUSTOMHELPDIR} ]; then \
echo ${MKDIR} -p ${T}${CUSTOMHELPDIR}; \
${MKDIR} -p ${T}${CUSTOMHELPDIR}; \
if [ ! -d "${T}${CUSTOMHELPDIR}" ]; then \
echo ${MKDIR} -p "${T}${CUSTOMHELPDIR}"; \
${MKDIR} -p "${T}${CUSTOMHELPDIR}"; \
fi; \
echo ${CHMOD} 0755 ${T}${CUSTOMHELPDIR}; \
${CHMOD} 0755 ${T}${CUSTOMHELPDIR}; \
else \
${TRUE}; \
fi
-${Q} if [ ! -d ${T}${CUSTOMINCDIR} ]; then \
echo ${MKDIR} -p ${T}${CUSTOMINCDIR}; \
${MKDIR} -p ${T}${CUSTOMINCDIR}; \
if [ ! -d "${T}${CUSTOMINCDIR}" ]; then \
echo ${MKDIR} -p "${T}${CUSTOMINCDIR}"; \
${MKDIR} -p "${T}${CUSTOMINCDIR}"; \
fi; \
echo ${CHMOD} 0755 ${T}${CUSTOMINCDIR}; \
${CHMOD} 0755 ${T}${CUSTOMINCDIR}; \
else \
${TRUE}; \
fi
-${Q} for i in ${INSTALL_H_SRC} /dev/null; do \
if [ "$$i" = "/dev/null" ]; then \
continue; \
fi; \
if ${CMP} -s "$$i" ${T}${CUSTOMINCDIR}/$$i; then \
${TRUE}; \
else \
${RM} -f ${T}${CUSTOMINCDIR}/$$i.new; \
${CP} -f $$i ${T}${CUSTOMINCDIR}/$$i.new; \
${CHMOD} 0444 ${T}${CUSTOMINCDIR}/$$i.new; \
${MV} -f ${T}${CUSTOMINCDIR}/$$i.new ${T}${CUSTOMINCDIR}/$$i; \
echo "installed ${T}${CUSTOMINCDIR}/$$i"; \
fi; \
done
-${Q} for i in ${CUSTOM_CALC_FILES} /dev/null; do \
if [ "$$i" = "/dev/null" ]; then \
continue; \
fi; \
if ${CMP} -s $$i ${T}${CUSTOMCALDIR}/$$i; then \
${TRUE}; \
else \
${RM} -f ${T}${CUSTOMCALDIR}/$$i.new; \
${CP} -f $$i ${T}${CUSTOMCALDIR}/$$i.new; \
${CHMOD} 0444 ${T}${CUSTOMCALDIR}/$$i.new; \
${MV} -f ${T}${CUSTOMCALDIR}/$$i.new ${T}${CUSTOMCALDIR}/$$i; \
echo "installed ${T}${CUSTOMCALDIR}/$$i"; \
fi; \
done
-${Q} for i in ${CUSTOM_HELP} /dev/null; do \
if [ "$$i" = "/dev/null" ]; then \
continue; \
fi; \
if ${CMP} -s $$i ${T}${CUSTOMHELPDIR}/$$i; then \
${TRUE}; \
else \
${RM} -f ${T}${CUSTOMHELPDIR}/$$i.new; \
${CP} -f $$i ${T}${CUSTOMHELPDIR}/$$i.new; \
${CHMOD} 0444 ${T}${CUSTOMHELPDIR}/$$i.new; \
${MV} -f ${T}${CUSTOMHELPDIR}/$$i.new \
${T}${CUSTOMHELPDIR}/$$i; \
echo "installed ${T}${CUSTOMHELPDIR}/$$i"; \
fi; \
done
-${Q} if [ -f "${T}${CUSTOMCALDIR}/libcustcalc.a" ]; then \
${RM} -f ${T}${CUSTOMCALDIR}/libcustcalc.a; \
echo "removed old ${T}${CUSTOMCALDIR}/libcustcalc.a"; \
fi
-${Q} if [ ! -z ${ALLOW_CUSTOM} ]; then \
if [ -f libcustcalc.a ]; then \
if ${CMP} -s libcustcalc.a ${T}${LIBDIR}/libcustcalc.a; then \
${TRUE}; \
else \
${RM} -f ${T}${LIBDIR}/libcustcalc.a.new; \
${CP} -f libcustcalc.a ${T}${LIBDIR}/libcustcalc.a.new; \
${CHMOD} 0644 ${T}${LIBDIR}/libcustcalc.a.new; \
${MV} -f ${T}${LIBDIR}/libcustcalc.a.new \
${T}${LIBDIR}/libcustcalc.a; \
${RANLIB} ${T}${LIBDIR}/libcustcalc.a; \
echo "installed ${T}${LIBDIR}/libcustcalc.a"; \
fi; \
fi; \
fi
${Q}# NOTE: The upper level makefile installs the file
${Q}# libcustcalc${LIB_EXT_VERSION} because we only want to
${Q}# perform one ${LDCONFIG} for both libcalc${LIB_EXT_VERSION}
${Q}# and libcustcalc${LIB_EXT_VERSION}.
# Try to remove everything that was installed
#
# NOTE: Keep the uninstall rule in reverse order to the install rule
#
uninstall:
-${Q} if [ -f "${T}${CUSTOMCALDIR}/libcustcalc.a" ]; then \
${RM} -f "${T}${CUSTOMCALDIR}/libcustcalc.a"; \
if [ -f "${T}${CUSTOMCALDIR}/libcustcalc.a" ]; then \
echo "cannot uninstall ${T}${CUSTOMCALDIR}/libcustcalc.a"; \
else \
echo "un-installed ${T}${CUSTOMCALDIR}/libcustcalc.a"; \
fi; \
fi
-${Q} for i in ${CUSTOM_HELP} /dev/null; do \
if [ "$$i" = "/dev/null" ]; then \
continue; \
fi; \
if [ -f "${T}${CUSTOMHELPDIR}/$$i" ]; then \
${RM} -f "${T}${CUSTOMHELPDIR}/$$i"; \
if [ -f "${T}${CUSTOMHELPDIR}/$$i" ]; then \
echo "cannot uninstall ${T}${CUSTOMHELPDIR}/$$i"; \
else \
echo "un-installed ${T}${CUSTOMHELPDIR}/$$i"; \
fi; \
fi; \
done
-${Q} for i in ${CUSTOM_CALC_FILES} /dev/null; do \
if [ "$$i" = "/dev/null" ]; then \
continue; \
fi; \
if [ -f "${T}${CUSTOMCALDIR}/$$i" ]; then \
${RM} -f "${T}${CUSTOMCALDIR}/$$i"; \
if [ -f "${T}${CUSTOMCALDIR}/$$i" ]; then \
echo "cannot uninstall ${T}${CUSTOMCALDIR}/$$i"; \
else \
echo "un-installed ${T}${CUSTOMCALDIR}/$$i"; \
fi; \
fi; \
done
-${Q} for i in ${INSTALL_H_SRC} /dev/null; do \
if [ "$$i" = "/dev/null" ]; then \
continue; \
fi; \
if [ -f "${T}${CUSTOMINCDIR}/$$i" ]; then \
${RM} -f "${T}${CUSTOMINCDIR}/$$i"; \
if [ -f "${T}${CUSTOMINCDIR}/$$i" ]; then \
echo "cannot uninstall ${T}${CUSTOMINCDIR}/$$i"; \
else \
echo "un-installed ${T}${CUSTOMINCDIR}/$$i"; \
fi; \
fi; \
done
-${Q} for i in ${CUSTOMINCDIR} ${CUSTOMHELPDIR} ${CUSTOMCALDIR} \
${HELPDIR} ${CALC_INCDIR} ${CALC_SHAREDIR} ${INCDIR}; do \
if [ -d "${T}$$i" ]; then \
${RMDIR} "${T}$$i" 2>/dev/null; \
echo "cleaned up ${T}$$i"; \
fi; \
done
##
#
# make depend stuff
#
##
# DO NOT DELETE THIS LINE -- make depend depends on it.
c_argv.o: ../alloc.h
c_argv.o: ../banned.h
c_argv.o: ../block.h
c_argv.o: ../byteswap.h
c_argv.o: ../calc.h
c_argv.o: ../calcerr.h
c_argv.o: ../cmath.h
c_argv.o: ../config.h
c_argv.o: ../custom.h
c_argv.o: ../decl.h
c_argv.o: ../endian_calc.h
c_argv.o: ../hash.h
c_argv.o: ../have_ban_pragma.h
c_argv.o: ../have_const.h
c_argv.o: ../have_memmv.h
c_argv.o: ../have_newstr.h
c_argv.o: ../have_stdlib.h
c_argv.o: ../have_string.h
c_argv.o: ../have_unused.h
c_argv.o: ../longbits.h
c_argv.o: ../nametype.h
c_argv.o: ../qmath.h
c_argv.o: ../sha1.h
c_argv.o: ../str.h
c_argv.o: ../value.h
c_argv.o: ../zmath.h
c_argv.o: c_argv.c
c_devnull.o: ../alloc.h
c_devnull.o: ../banned.h
c_devnull.o: ../block.h
c_devnull.o: ../byteswap.h
c_devnull.o: ../calcerr.h
c_devnull.o: ../cmath.h
c_devnull.o: ../config.h
c_devnull.o: ../custom.h
c_devnull.o: ../decl.h
c_devnull.o: ../endian_calc.h
c_devnull.o: ../hash.h
c_devnull.o: ../have_ban_pragma.h
c_devnull.o: ../have_const.h
c_devnull.o: ../have_memmv.h
c_devnull.o: ../have_newstr.h
c_devnull.o: ../have_stdlib.h
c_devnull.o: ../have_string.h
c_devnull.o: ../have_unistd.h
c_devnull.o: ../have_unused.h
c_devnull.o: ../longbits.h
c_devnull.o: ../nametype.h
c_devnull.o: ../qmath.h
c_devnull.o: ../sha1.h
c_devnull.o: ../str.h
c_devnull.o: ../value.h
c_devnull.o: ../zmath.h
c_devnull.o: c_devnull.c
c_help.o: ../alloc.h
c_help.o: ../banned.h
c_help.o: ../block.h
c_help.o: ../byteswap.h
c_help.o: ../calcerr.h
c_help.o: ../cmath.h
c_help.o: ../config.h
c_help.o: ../custom.h
c_help.o: ../decl.h
c_help.o: ../endian_calc.h
c_help.o: ../hash.h
c_help.o: ../have_ban_pragma.h
c_help.o: ../have_const.h
c_help.o: ../have_memmv.h
c_help.o: ../have_newstr.h
c_help.o: ../have_stdlib.h
c_help.o: ../have_string.h
c_help.o: ../have_unistd.h
c_help.o: ../have_unused.h
c_help.o: ../longbits.h
c_help.o: ../nametype.h
c_help.o: ../qmath.h
c_help.o: ../sha1.h
c_help.o: ../str.h
c_help.o: ../value.h
c_help.o: ../zmath.h
c_help.o: c_help.c
c_pmodm127.o: ../alloc.h
c_pmodm127.o: ../banned.h
c_pmodm127.o: ../block.h
c_pmodm127.o: ../byteswap.h
c_pmodm127.o: ../calcerr.h
c_pmodm127.o: ../cmath.h
c_pmodm127.o: ../config.h
c_pmodm127.o: ../custom.h
c_pmodm127.o: ../decl.h
c_pmodm127.o: ../endian_calc.h
c_pmodm127.o: ../hash.h
c_pmodm127.o: ../have_ban_pragma.h
c_pmodm127.o: ../have_const.h
c_pmodm127.o: ../have_memmv.h
c_pmodm127.o: ../have_newstr.h
c_pmodm127.o: ../have_stdlib.h
c_pmodm127.o: ../have_string.h
c_pmodm127.o: ../have_unused.h
c_pmodm127.o: ../longbits.h
c_pmodm127.o: ../nametype.h
c_pmodm127.o: ../qmath.h
c_pmodm127.o: ../sha1.h
c_pmodm127.o: ../str.h
c_pmodm127.o: ../value.h
c_pmodm127.o: ../zmath.h
c_pmodm127.o: c_pmodm127.c
c_pzasusb8.o: ../alloc.h
c_pzasusb8.o: ../banned.h
c_pzasusb8.o: ../block.h
c_pzasusb8.o: ../byteswap.h
c_pzasusb8.o: ../calcerr.h
c_pzasusb8.o: ../cmath.h
c_pzasusb8.o: ../config.h
c_pzasusb8.o: ../custom.h
c_pzasusb8.o: ../decl.h
c_pzasusb8.o: ../endian_calc.h
c_pzasusb8.o: ../hash.h
c_pzasusb8.o: ../have_ban_pragma.h
c_pzasusb8.o: ../have_const.h
c_pzasusb8.o: ../have_memmv.h
c_pzasusb8.o: ../have_newstr.h
c_pzasusb8.o: ../have_stdlib.h
c_pzasusb8.o: ../have_string.h
c_pzasusb8.o: ../have_unused.h
c_pzasusb8.o: ../longbits.h
c_pzasusb8.o: ../nametype.h
c_pzasusb8.o: ../qmath.h
c_pzasusb8.o: ../sha1.h
c_pzasusb8.o: ../str.h
c_pzasusb8.o: ../value.h
c_pzasusb8.o: ../zmath.h
c_pzasusb8.o: c_pzasusb8.c
c_register.o: ../alloc.h
c_register.o: ../banned.h
c_register.o: ../block.h
c_register.o: ../byteswap.h
c_register.o: ../calc.h
c_register.o: ../calcerr.h
c_register.o: ../cmath.h
c_register.o: ../config.h
c_register.o: ../custom.h
c_register.o: ../decl.h
c_register.o: ../endian_calc.h
c_register.o: ../hash.h
c_register.o: ../have_ban_pragma.h
c_register.o: ../have_const.h
c_register.o: ../have_memmv.h
c_register.o: ../have_newstr.h
c_register.o: ../have_stdlib.h
c_register.o: ../have_string.h
c_register.o: ../have_unused.h
c_register.o: ../longbits.h
c_register.o: ../nametype.h
c_register.o: ../qmath.h
c_register.o: ../sha1.h
c_register.o: ../str.h
c_register.o: ../value.h
c_register.o: ../zmath.h
c_register.o: c_register.c
c_sysinfo.o: ../alloc.h
c_sysinfo.o: ../banned.h
c_sysinfo.o: ../block.h
c_sysinfo.o: ../byteswap.h
c_sysinfo.o: ../calc.h
c_sysinfo.o: ../calcerr.h
c_sysinfo.o: ../cmath.h
c_sysinfo.o: ../conf.h
c_sysinfo.o: ../config.h
c_sysinfo.o: ../custom.h
c_sysinfo.o: ../decl.h
c_sysinfo.o: ../endian_calc.h
c_sysinfo.o: ../fposval.h
c_sysinfo.o: ../hash.h
c_sysinfo.o: ../have_ban_pragma.h
c_sysinfo.o: ../have_const.h
c_sysinfo.o: ../have_memmv.h
c_sysinfo.o: ../have_newstr.h
c_sysinfo.o: ../have_stdlib.h
c_sysinfo.o: ../have_string.h
c_sysinfo.o: ../have_unused.h
c_sysinfo.o: ../hist.h
c_sysinfo.o: ../lib_calc.h
c_sysinfo.o: ../longbits.h
c_sysinfo.o: ../nametype.h
c_sysinfo.o: ../prime.h
c_sysinfo.o: ../qmath.h
c_sysinfo.o: ../sha1.h
c_sysinfo.o: ../str.h
c_sysinfo.o: ../value.h
c_sysinfo.o: ../zmath.h
c_sysinfo.o: ../zrand.h
c_sysinfo.o: ../zrandom.h
c_sysinfo.o: c_sysinfo.c
custtbl.o: ../alloc.h
custtbl.o: ../banned.h
custtbl.o: ../block.h
custtbl.o: ../byteswap.h
custtbl.o: ../calcerr.h
custtbl.o: ../cmath.h
custtbl.o: ../config.h
custtbl.o: ../custom.h
custtbl.o: ../decl.h
custtbl.o: ../endian_calc.h
custtbl.o: ../hash.h
custtbl.o: ../have_ban_pragma.h
custtbl.o: ../have_const.h
custtbl.o: ../have_memmv.h
custtbl.o: ../have_newstr.h
custtbl.o: ../have_stdlib.h
custtbl.o: ../have_string.h
custtbl.o: ../longbits.h
custtbl.o: ../nametype.h
custtbl.o: ../qmath.h
custtbl.o: ../sha1.h
custtbl.o: ../str.h
custtbl.o: ../value.h
custtbl.o: ../zmath.h
custtbl.o: custtbl.c
##################################################
# NOTE: End of section from custom/Makefile.tail #
##################################################