Files
calc/custom/Makefile.head
2017-05-23 02:16:52 -07:00

438 lines
12 KiB
Makefile

#!/bin/make
#
# custom - makefile for calc custom routines
#
# Copyright (C) 1999-2006,2014,2017 Landon Curt Noll
#
# Calc is open software; you can redistribute it and/or modify it under
# the terms of the version 2.1 of the GNU Lesser General Public License
# as published by the Free Software Foundation.
#
# Calc is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General
# Public License for more details.
#
# A copy of version 2.1 of the GNU Lesser General Public License is
# distributed with calc under the filename COPYING-LGPL. You should have
# received a copy with calc; if not, write to Free Software Foundation, Inc.
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# Under source code control: 1997/03/09 02:28:54
# File existed as early as: 1997
#
# chongo <was here> /\oo/\ http://www.isthe.com/chongo/
# Share and enjoy! :-) http://www.isthe.com/chongo/tech/comp/calc/
#
# calculator by David I. Bell with help/mods from others
# Makefile by Landon Curt Noll
#if 0 /* start of skip for non-Gnu makefiles */
##############################################################################
#-=-=-=-=-=-=-=-=- Identify the target machine, if possible -=-=-=-=-=-=-=-=-#
##############################################################################
# NOTE: You can force a target value by defining target as in:
#
# make ...__optional_arguments_... target=value
# Try uname -s if the target was not alreadhy set on the make command line
#
ifeq ($(target),)
target=$(shell uname -s 2>/dev/null)
endif
#endif /* end of skip for non-Gnu makefiles */
##############################################################################
#-=-=-=-=-=-=-=-=- You may want to change some values below -=-=-=-=-=-=-=-=-#
##############################################################################
# The custom calc resource files to install
#
# Put your custom calc resource files here.
#
CUSTOM_CALC_FILES= argv.cal halflen.cal pzasusb8.cal pmodm127.cal register.cal
# The custom help files to install
#
# Put your custom help files here.
#
CUSTOM_HELP= argv devnull help sysinfo pzasusb8 pmodm127 register
# Any .h files that are needed by programs that use
# libcustcalc${LIB_EXT_VERSION}
#
# Put any .h files that you add which might be useful to other
# programs here.
#
CUSTOM_H_SRC=
# Any .c files that are needed to build libcustcalc${LIB_EXT_VERSION}.
#
# Don't put ${REQUIRED_SRC} files in this list.
#
# There MUST be a .c in CUSTOM_SRC for every .o in CUSTOM_OBJ.
#
# Put your custom .c files here.
#
CUSTOM_SRC= c_argv.c c_devnull.c c_help.c c_sysinfo.c c_pzasusb8.c \
c_pmodm127.c c_register.c
# Any .o files that are needed by program that use
# libcustcalc${LIB_EXT_VERSION}.
#
# Don't put ${REQUIRED_OBJ} files in this list.
#
# There MUST be a .c in CUSTOM_SRC for every .o in CUSTOM_OBJ.
#
# Put your custom .o files here.
#
CUSTOM_OBJ= c_argv.o c_devnull.o c_help.o c_sysinfo.o c_pzasusb8.o \
c_pmodm127.o c_register.o
##############################################################################
#-=-=-=-=-=-=- Defaults in case you want to build from this dir -=-=-=-=-=-=-#
##############################################################################
# Normally, the upper level makefile will set these values. We provide
# a default here just in case you want to build from this directory.
#
# Makefile debug
#
# Q=@ do not echo internal makefile actions (quiet mode)
# Q= echo internal makefile actions (debug / verbose mode)
#
#Q=
Q=@
####
# Normally, the upper level makefile will set these values. We provide
# a default here just in case you want to build from this directory.
####
# Where the system include (.h) files are kept
#
# For DJGPP, select:
#
# INCDIR= /dev/env/DJDIR/include
#
# If in doubt, set:
#
# INCDIR= /usr/include
#
#INCDIR= /usr/local/include
#INCDIR= /dev/env/DJDIR/include
INCDIR= /usr/include
# where to install calc realted things
#
# ${BINDIR} where to install calc binary files
# ${LIBDIR} where calc link library (*.a) files are installed
# ${CALC_SHAREDIR} where to install calc help, .cal, startup, config files
#
# NOTE: The install rule prepends installation paths with ${T}, which
# by default is empty. If ${T} is non-empty, then installation
# locations will be relative to the ${T} directory.
#
# For DJGPP, select:
#
# BINDIR= /dev/env/DJDIR/bin
# LIBDIR= /dev/env/DJDIR/lib
# CALC_SHAREDIR= /dev/env/DJDIR/share/calc
#
# If in doubt, set:
#
# BINDIR= /usr/bin
# LIBDIR= /usr/lib
# CALC_SHAREDIR= /usr/share/calc
#
#BINDIR= /usr/local/bin
#BINDIR= /dev/env/DJDIR/bin
BINDIR= /usr/bin
#LIBDIR= /usr/local/lib
#LIBDIR= /dev/env/DJDIR/lib
LIBDIR= /usr/lib
#CALC_SHAREDIR= /usr/local/lib/calc
#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
CALC_SHAREDIR= /usr/share/calc
# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
# ---------------------------------------------------------------
# ${HELPDIR} where the help directory is installed
# ${CALC_INCDIR} where the calc include files are installed
# ${CUSTOMCALDIR} where custom *.cal files are installed
# ${CUSTOMHELPDIR} where custom help files are installed
# ${CUSTOMINCDIR} where custom .h files are installed
# ${SCRIPTDIR} where calc shell scripts are installed
#
# NOTE: The install rule prepends installation paths with ${T}, which
# by default is empty. If ${T} is non-empty, then installation
# locations will be relative to the ${T} directory.
#
# If in doubt, set:
#
# HELPDIR= ${CALC_SHAREDIR}/help
# CALC_INCDIR= ${INCDIR}/calc
# CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
# CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
# CUSTOMINCDIR= ${CALC_INCDIR}/custom
# SCRIPTDIR= ${BINDIR}/cscript
#
HELPDIR= ${CALC_SHAREDIR}/help
CALC_INCDIR= ${INCDIR}/calc
CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
CUSTOMINCDIR= ${CALC_INCDIR}/custom
SCRIPTDIR= ${BINDIR}/cscript
# T - top level directory under which calc will be installed
#
# The calc install is performed under ${T}, the calc build is
# performed under /. The purpose for ${T} is to allow someone
# to install calc somewhere other than into the system area.
#
# For example, if:
#
# BINDIR= /usr/bin
# LIBDIR= /usr/lib
# CALC_SHAREDIR= /usr/share/calc
#
# and if:
#
# T= /var/tmp/testing
#
# Then the installation locations will be:
#
# calc binary files: /var/tmp/testing/usr/bin
# calc link library: /var/tmp/testing/usr/lib
# calc help, .cal ...: /var/tmp/testing/usr/share/calc
# ... etc ... /var/tmp/testing/...
#
# If ${T} is empty, calc is installed under /, which is the same
# top of tree for which it was built. If ${T} is non-empty, then
# calc is installed under ${T}, as if one had to chroot under
# ${T} for calc to operate.
#
# If in doubt, use T=
#
T=
# Debug/Optimize options for ${CC} and ${LCC}
#
# Select DEBUG= -O2 -gstabs+ -DWINDOZ for DJGPP.
#
#DEBUG=
#
#DEBUG= -O
#DEBUG= -O -g
#DEBUG= -O -g3
#
#DEBUG= -O1
#DEBUG= -O1 -g
#DEBUG= -O1 -g3
#
#DEBUG= -O2
#DEBUG= -O2 -g
#DEBUG= -O2 -g3
#DEBUG= -O2 -ipa
#DEBUG= -O2 -g3 -ipa
#
#DEBUG= -O3
#DEBUG= -O3 -g
DEBUG= -O3 -g3
#DEBUG= -O3 -ipa
#DEBUG= -O3 -g3 -ipa
#
#DEBUG= -g
#DEBUG= -g3
#DEBUG= -gx
#DEBUG= -WM,-g
#
#DEBUG= -O2 -gstabs+ -DWINDOZ
# Some systems require one to use ranlib to add a symbol table to
# a *.a link library. Set RANLIB to the utility that performs this
# action. Set RANLIB to : if your system does not need such a utility.
#
RANLIB=ranlib
#RANLIB=:
# Normally certain files depend on the Makefile. If the Makefile is
# changed, then certain steps should be redone. If MAKE_FILE is
# set to Makefile, then these files will depend on Makefile. If
# MAKE_FILE is empty, then they wont.
#
# If in doubt, set MAKE_FILE to Makefile
#
MAKE_FILE= Makefile
#MAKE_FILE=
# Controlling file makefile basename (without the path)
#
# This is the basename same of the makefile that may/does/will drive
# this makefile.
#
# If in doubt, set TOP_MAKE_FILE to Makefile
#
TOP_MAKE_FILE= Makefile
# If you do not wish to use purify, set PURIFY to an empty string.
#
# If in doubt, use PURIFY=
#
#PURIFY= purify
#PURIFY= purify -m71-engine
#PURIFY= purify -logfile=pure.out
#PURIFY= purify -m71-engine -logfile=pure.out
PURIFY=
# If you want to use a debugging link library such as a malloc debug link
# library, or need to add special ld flags after the calc link libraries
# are included, set ${LD_DEBUG} below.
#
# If in doubt, set LD_DEBUG to empty.
#
#LD_DEBUG= -lmalloc_cv
LD_DEBUG=
# When doing a:
#
# make check
# make chk
# make debug
#
# the ${CALC_ENV} is used to supply the proper environment variables
# to calc. Most people will simply need 'CALCPATH=./cal' to ensure
# that these debug rules will only use calc resource files under the
# local source directory. The longer lines (with MALLOC_VERBOSE=1 ...)
# are useful for SGI IRIX people who have 'WorkShop Performance Tools'
# and who also set 'LD_DEBUG= -lmalloc_cv' above.
#
# If in doubt, use CALC_ENV= CALCPATH=./cal.
#
CALC_ENV= CALCPATH=./cal
#CALC_ENV= CALCPATH=./cal MALLOC_VERBOSE=1 MALLOC_TRACING=1 \
# MALLOC_FASTCHK=1 MALLOC_FULLWARN=1
#CALC_ENV= CALCPATH=./cal MALLOC_VERBOSE=1 MALLOC_TRACING=1 \
# MALLOC_FASTCHK=1 MALLOC_FULLWARN=1 MALLOC_CLEAR_FREE=1 \
# MALLOC_CLEAR_MALLOC=1
# By default, custom builtin functions may only be executed if calc
# is given the -C option. This is because custom builtin functions
# may invoke non-standard or non-portable code. One may completely
# disable custom builtin functions by not compiling any of code
#
# ALLOW_CUSTOM= -DCUSTOM # allow custom only if -C is given
# ALLOW_CUSTOM= # disable custom even if -C is given
#
# If in doubt, use ALLOW_CUSTOM= -DCUSTOM
#
ALLOW_CUSTOM= -DCUSTOM
#ALLOW_CUSTOM=
# Some out of date operating systems require / want an executable to
# end with a certain file extension. Some compile systems such as
# Cygwin build calc as calc.exe. The EXT variable is used to denote
# the extension required by such.
#
# EXT= # normal Un*x / Linux / GNU/Linux systems
# EXT=.exe # windoz / Cygwin
#
# If in doubt, use EXT=
#
EXT=
#EXT=.exe
# The default calc versions
#
VERSION= 2.12.6.0
# Names of shared libraries with versions
#
LIB_EXT= .so
LIB_EXT_VERSION= ${LIB_EXT}.${VERSION}
# standard tools
#
SHELL= /bin/sh
SED= sed
MAKEDEPEND= makedepend
GREP= egrep
CHMOD= chmod
FMT= fmt
SORT= sort
CMP= cmp
AR= ar
RM= rm
TOUCH= touch
MKDIR= mkdir
RMDIR= rmdir
MV= mv
CP= cp
CO= co
TRUE= true
MAKE= make
LN= ln
AWK= awk
# EXTRA_CFLAGS are flags given to ${CC} when compiling C files
# EXTRA_LDFLAGS are flags given to ${CC} when linking progs
#
# Both CFLAGS and LDFLAGS are left blank in this Makefile by
# default so that users may use them on the make command line
# to always the way that C is compiled and files are linked
# respectively. For example:
#
# make all EXTRA_CFLAGS="-DMAGIC" EXTRA_LDFLAGS="-lmagic"
#
# NOTE: These should be left blank in this Makefile to make it
# easier to add stuff on the command line. If you want to
# to change the way calc is compiled by this Makefile, change
# the appropirate host target section below or a flag above.
#
EXTRA_CFLAGS=
EXTRA_LDFLAGS=
# COMMON_CFLAGS are the common ${CC} flags used for all progs, both
# intermediate and final calc and calc related progs
#
COMMON_CFLAGS= -DCALC_SRC ${ALLOW_CUSTOM} ${CCWARN} ${CCMISC} ${EXTRA_CFLAGS}
# COMMON_LDFLAGS are the common flags used for linking all progs, both
# intermediate and final calc and calc related progs
#
COMMON_LDFLAGS= ${EXTRA_LDFLAGS}
###########################################
# Set the default compile flags for ${CC} #
###########################################
#if 0 /* start of skip for non-Gnu makefiles */
# Required flags to compile C files for calc
#
# ICFLAGS are given to ${CC} for intermediate progs used to help compile calc
# CFLAGS are given to ${CC} for calc progs other than intermediate progs
#
# NOTE: This does not work for: make-XYZ-only and BLD_TYPE != make-XYZ-only
#
ifeq ($(BLD_TYPE),calc-static-only)
ICFLAGS= ${COMMON_CFLAGS} ${CC_STATIC}
else
ICFLAGS= ${COMMON_CFLAGS} ${CC_SHARE}
endif
CFLAGS= ${ICFLAGS} ${CCOPT}
# Required flags to link files for calc
#
# ILDFLAGS for ${CC} in linking intermediate progs used to help compile calc
# LDFLAGS for ${CC} in linking calc progs other than intermediate progs
#
ILDFLAGS= ${COMMON_LDFLAGS}
LDFLAGS= ${LD_DEBUG} ${ILDFLAGS}
#endif /* end of skip for non-Gnu makefiles */