#!/bin/make
#
# custom - makefile for calc custom routines
#
# Copyright (C) 1999-2006,2014,2017-2018,2021  Landon Curt Noll
#
# SRC: custom/Makefile.head
#
#	The "# SRC: ... - ..." comment line above indicates
#	the origin of this file.
#
# IMPORTANT: Please see the section on Makefiles near the
#	     bottom of the HOWTO.INSTALL file.
#
# Calc is open software; you can redistribute it and/or modify it under
# the terms of the version 2.1 of the GNU Lesser General Public License
# as published by the Free Software Foundation.
#
# Calc is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU Lesser General
# Public License for more details.
#
# A copy of version 2.1 of the GNU Lesser General Public License is
# distributed with calc under the filename COPYING-LGPL.  You should have
# received a copy with calc; if not, write to Free Software Foundation, Inc.
# 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
#
# Under source code control:	1997/03/09 02:28:54
# File existed as early as:	1997
#
# chongo <was here> /\oo/\	http://www.isthe.com/chongo/
# Share and enjoy!  :-) http://www.isthe.com/chongo/tech/comp/calc/
#
# calculator by David I. Bell with help/mods from others
# Makefile by Landon Curt Noll

####################################################
# NOTE: Start of section from custom/Makefile.head #
####################################################

#.###############################################################.#
#.#								#.#
#.# WARNING: This Makefile is generated from a combination of	#.#
#.#	   custom/Makefile.head, Makefile.ship, and		#.#
#.#	   custom/Makefile.tail.  We recommend that you NOT	#.#
#.#	   edit this file, but instead edit the proper source	#.#
#.#	   file and then make custom/Makefile:			#.#
#.#								#.#
#.#		make custom/Makefile				#.#
#.#								#.#
#.#	   See the '# NOTE .. section from ..' lines for	#.#
#.#	   where the source file for the lines are from.	#.#
#.#								#.#
#.###############################################################.#


# The shell used by this Makefile
#
# On some systems, /bin/sh is a rather reduced shell with
# deprecated behavior.
#
# If your system has a up to date, bash shell, then
# you may wish to use:
#
#	SHELL= /bin/bash
#
# On some systems such as macOS, the bash shell is very
# far behind to the point where is cannot be depended on.
# On such systems, the zsh may be a much better alternative
# shell for this Makefile to use:
#
#	SHELL= /bin/zsh
#
SHELL= /bin/sh
#SHELL= /bin/bash
#SHELL= /bin/zsh


# PREFIX - Top level location for calc
#
# The PREFIX is often prepended to paths within calc and calc Makefiles.
#
# Starting with calc v2.13.0.1, nearly all Makefile places that used
# /usr/local now use ${PREFIX}.  An exception is the olduninstall rule
# and, of course, this section. :-)
#
# NOTE: The ${PREFIX} is not the same as ${T}.  The ${T} specifies
#	a top level directory under which calc installs things.
#	While usually ${T} is empty, it can be specific path
#	as if calc where "chrooted" during an install.
#	The ${PREFIX} value, during install, is a path between
#	the top level ${T} install directory and the object
#	such as an include file.
#
# NOTE: See also, ${T}, below.
#
# There are some paths that do NOT call under ${PREFIX}, such as
# ${CALCPATH}, that include paths not under ${PREFIX}, but those
# too are exceptions to this general rule.
#
# When in doubt, try:
#
#	PREFIX= /usr/local
#
PREFIX= /usr/local
#PREFIX= /usr
#PREFIX= /usr/global


# CCBAN is given to ${CC} in order to control if banned.h is in effect.
#
# The banned.h attempts to ban the use of certain dangerous functions
# that, if improperly used, could compromise the computational integrity
# if calculations.
#
# In the case of calc, we are motivated in part by the desire for calc
# to correctly calculate: even during extremely long calculations.
#
# If UNBAN is NOT defined, then calling certain functions
# will result in a call to a non-existent function (link error).
#
# While we do NOT encourage defining UNBAN, there may be
# a system / compiler environment where re-defining a
# function may lead to a fatal compiler complication.
# If that happens, consider compiling as:
#
#	make clobber all chk CCBAN=-DUNBAN
#
# as see if this is a work-a-round.
#
# If YOU discover a need for the -DUNBAN work-a-round, PLEASE tell us!
# Please send us a bug report.  See the file:
#
#	BUGS
#
# or the URL:
#
#	http://www.isthe.com/chongo/tech/comp/calc/calc-bugrept.html
#
# for how to send us such a bug report.
#
CCBAN= -UUNBAN
#CCBAN= -DUNBAN


#if 0	/* start of skip for non-Gnu makefiles */
##############################################################################
#-=-=-=-=-=-=-=-=- Identify the target machine, if possible -=-=-=-=-=-=-=-=-#
##############################################################################

# NOTE: You can force a target value by defining target as in:
#
#	make ...__optional_arguments_... target=value

# Try uname -s if the target was not already set on the make command line
#
ifeq ($(target),)
target=$(shell uname -s 2>/dev/null)
endif
#endif	/* end of skip for non-Gnu makefiles */

##############################################################################
#-=-=-=-=-=-=-=-=- You may want to change some values below -=-=-=-=-=-=-=-=-#
##############################################################################

# The custom calc resource files to install
#
# Put your custom calc resource files here.
#
CUSTOM_CALC_FILES= argv.cal halflen.cal pzasusb8.cal pmodm127.cal register.cal

# The custom help files to install
#
# Put your custom help files here.
#
CUSTOM_HELP= argv devnull help sysinfo pzasusb8 pmodm127 register

# Any .h files that are needed by programs that use
# libcustcalc${LIB_EXT_VERSION}
#
# Put any .h files that you add which might be useful to other
# programs here.
#
CUSTOM_H_SRC=

# Any .c files that are needed to build libcustcalc${LIB_EXT_VERSION}.
#
# Don't put ${REQUIRED_SRC} files in this list.
#
# There MUST be a .c in CUSTOM_SRC for every .o in CUSTOM_OBJ.
#
# Put your custom .c files here.
#
CUSTOM_SRC= c_argv.c c_devnull.c c_help.c c_sysinfo.c c_pzasusb8.c \
	c_pmodm127.c c_register.c

# Any .o files that are needed by program that use
# libcustcalc${LIB_EXT_VERSION}.
#
# Don't put ${REQUIRED_OBJ} files in this list.
#
# There MUST be a .c in CUSTOM_SRC for every .o in CUSTOM_OBJ.
#
# Put your custom .o files here.
#
CUSTOM_OBJ= c_argv.o c_devnull.o c_help.o c_sysinfo.o c_pzasusb8.o \
	c_pmodm127.o c_register.o

##############################################################################
#-=-=-=-=-=-=- Defaults in case you want to build from this dir -=-=-=-=-=-=-#
##############################################################################

# Normally, the upper level makefile will set these values.  We provide
# a default here just in case you want to build from this directory.

# Makefile debug
#
# Q=@	do not echo internal Makefile actions (quiet mode)
# Q=	echo internal Makefile actions (debug / verbose mode)
#
# H=@:	do not report hsrc file formation progress
# H=@	do echo hsrc file formation progress
#
# S= >/dev/null 2>&1	slience ${CC} output during hsrc file formation
# S=			full ${CC} output during hsrc file formation
#
# E= 2>/dev/null	slience command stderr during hsrc file formation
# E=			full command stderr during hsrc file formation
#
# V=@:	do not echo debug statements (quiet mode)
# V=@	do echo debug statements (debug / verbose mode)
#
#Q=
Q=@
#
S= >/dev/null 2>&1
#S=
#
E= 2>/dev/null
#E=
#
#H=@:
H=@
#
V=@:
#V=@

####
# Normally, the upper level makefile will set these values.  We provide
# a default here just in case you want to build from this directory.
####

# Where the system include (.h) files are kept
#
# For DJGPP, select:
#
#	INCDIR= /dev/env/DJDIR/include
#
# If in doubt, set:
#
#	INCDIR= /usr/include
#

#INCDIR= ${PREFIX}/include
#INCDIR= /dev/env/DJDIR/include
INCDIR= /usr/include

# where to install calc related things
#
# ${BINDIR}		where to install calc binary files
# ${LIBDIR}		where calc link library (*.a) files are installed
# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
#
# NOTE: The install rule prepends installation paths with ${T}, which
#	by default is empty.  If ${T} is non-empty, then installation
#	locations will be relative to the ${T} directory.
#
# For DJGPP, select:
#
#	BINDIR= /dev/env/DJDIR/bin
#	LIBDIR= /dev/env/DJDIR/lib
#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
#
# If in doubt, set:
#
#	BINDIR= /usr/bin
#	LIBDIR= /usr/lib
#	CALC_SHAREDIR= /usr/share/calc
#
#BINDIR= ${PREFIX}/bin
#BINDIR= /dev/env/DJDIR/bin
BINDIR= /usr/bin

#LIBDIR= ${PREFIX}/lib
#LIBDIR= /dev/env/DJDIR/lib
LIBDIR= /usr/lib

#CALC_SHAREDIR= ${PREFIX}/lib/calc
#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
CALC_SHAREDIR= /usr/share/calc

# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
# ---------------------------------------------------------------
# ${HELPDIR}		where the help directory is installed
# ${CALC_INCDIR}	where the calc include files are installed
# ${CUSTOMCALDIR}	where custom *.cal files are installed
# ${CUSTOMHELPDIR}	where custom help files are installed
# ${CUSTOMINCDIR}	where custom .h files are installed
# ${SCRIPTDIR}		where calc shell scripts are installed
#
# NOTE: The install rule prepends installation paths with ${T}, which
#	by default is empty.  If ${T} is non-empty, then installation
#	locations will be relative to the ${T} directory.
#
# If in doubt, set:
#
#	HELPDIR= ${CALC_SHAREDIR}/help
#	CALC_INCDIR= ${INCDIR}/calc
#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
#	SCRIPTDIR= ${BINDIR}/cscript
#
HELPDIR= ${CALC_SHAREDIR}/help
CALC_INCDIR= ${INCDIR}/calc
CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
CUSTOMINCDIR= ${CALC_INCDIR}/custom
SCRIPTDIR= ${BINDIR}/cscript

# T - top level directory under which calc will be installed
#
# The calc install is performed under ${T}, the calc build is
# performed under /.	The purpose for ${T} is to allow someone
# to install calc somewhere other than into the system area.
#
# For example, if:
#
#     BINDIR= /usr/bin
#     LIBDIR= /usr/lib
#     CALC_SHAREDIR= /usr/share/calc
#
# and if:
#
#     T= /var/tmp/testing
#
# Then the installation locations will be:
#
#     calc binary files:	/var/tmp/testing/usr/bin
#     calc link library:	/var/tmp/testing/usr/lib
#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
#     ... etc ...		/var/tmp/testing/...
#
# If ${T} is empty, calc is installed under /, which is the same
# top of tree for which it was built.  If ${T} is non-empty, then
# calc is installed under ${T}, as if one had to chroot under
# ${T} for calc to operate.
#
# If in doubt, use T=
#
T=

# Debug/Optimize options for ${CC} and ${LCC}
#
# Select DEBUG= -O2 -gstabs+ -DWINDOZ for DJGPP.
#
#DEBUG=
#
#DEBUG= -O
#DEBUG= -O -g
#DEBUG= -O -g3
#
#DEBUG= -O1
#DEBUG= -O1 -g
#DEBUG= -O1 -g3
#
#DEBUG= -O2
#DEBUG= -O2 -g
#DEBUG= -O2 -g3
#DEBUG= -O2 -ipa
#DEBUG= -O2 -g3 -ipa
#
#DEBUG= -O3
#DEBUG= -O3 -g
DEBUG= -O3 -g3
#DEBUG= -O3 -ipa
#DEBUG= -O3 -g3 -ipa
#
#DEBUG= -g
#DEBUG= -g3
#DEBUG= -gx
#DEBUG= -WM,-g
#
#DEBUG= -O2 -gstabs+ -DWINDOZ

# Some systems require one to use ranlib to add a symbol table to
# a *.a link library.  Set RANLIB to the utility that performs this
# action.  Set RANLIB to : if your system does not need such a utility.
#
RANLIB=ranlib
#RANLIB=:

# Normally certain files depend on the Makefile.  If the Makefile is
# changed, then certain steps should be redone.	 If MAKE_FILE is
# set to Makefile, then these files will depend on Makefile.  If
# MAKE_FILE is empty, then they wont.
#
# If in doubt, set MAKE_FILE to Makefile
#
MAKE_FILE= Makefile
#MAKE_FILE=

# Controlling file makefile basename (without the path)
#
# This is the basename same of the makefile that may/does/will drive
# this makefile.
#
# If in doubt, set TOP_MAKE_FILE to Makefile
#
TOP_MAKE_FILE= Makefile

# If you do not wish to use purify, set PURIFY to an empty string.
#
# If in doubt, use PURIFY=
#
#PURIFY= purify
#PURIFY= purify -m71-engine
#PURIFY= purify -logfile=pure.out
#PURIFY= purify -m71-engine -logfile=pure.out
PURIFY=

# If you want to use a debugging link library such as a malloc debug link
# library, or need to add special ld flags after the calc link libraries
# are included, set ${LD_DEBUG} below.
#
# If in doubt, set LD_DEBUG to empty.
#
#LD_DEBUG= -lmalloc_cv
LD_DEBUG=

# When doing a:
#
#	make check
#	make chk
#	make debug
#
# the ${CALC_ENV} is used to supply the proper environment variables
# to calc.  Most people will simply need 'CALCPATH=./cal' to ensure
# that these debug rules will only use calc resource files under the
# local source directory.  The longer lines (with MALLOC_VERBOSE=1 ...)
# are useful for SGI IRIX people who have 'WorkShop Performance Tools'
# and who also set 'LD_DEBUG= -lmalloc_cv' above.
#
# If in doubt, use CALC_ENV= CALCPATH=./cal.
#
CALC_ENV= CALCPATH=./cal
#CALC_ENV= CALCPATH=./cal MALLOC_VERBOSE=1 MALLOC_TRACING=1 \
#	  MALLOC_FASTCHK=1 MALLOC_FULLWARN=1
#CALC_ENV= CALCPATH=./cal MALLOC_VERBOSE=1 MALLOC_TRACING=1 \
#	  MALLOC_FASTCHK=1 MALLOC_FULLWARN=1 MALLOC_CLEAR_FREE=1 \
#	  MALLOC_CLEAR_MALLOC=1

# By default, custom builtin functions may only be executed if calc
# is given the -C option.  This is because custom builtin functions
# may invoke non-standard or non-portable code.	 One may completely
# disable custom builtin functions by not compiling any of code
#
# ALLOW_CUSTOM= -DCUSTOM	# allow custom only if -C is given
# ALLOW_CUSTOM=			# disable custom even if -C is given
#
# If in doubt, use ALLOW_CUSTOM= -DCUSTOM
#
ALLOW_CUSTOM= -DCUSTOM
#ALLOW_CUSTOM=

# Some out of date operating systems require / want an executable to
# end with a certain file extension.  Some compile systems such as
# Cygwin build calc as calc.exe.  The EXT variable is used to denote
# the extension required by such.
#
# EXT=				# normal Un*x / Linux / GNU/Linux systems
# EXT=.exe			# windoz / Cygwin
#
# If in doubt, use EXT=
#
EXT=
#EXT=.exe

# The default calc versions
#
VERSION= 2.14.0.0

# Names of shared libraries with versions
#
LIB_EXT= .so
LIB_EXT_VERSION= ${LIB_EXT}.${VERSION}

# standard tools
#
AR= ar
AWK= awk
CHMOD= chmod
CMP= cmp
CO= co
CP= cp
FMT= fmt
GREP= egrep
LN= ln
MAKE= make
MAKEDEPEND= makedepend
MKDIR= mkdir
MV= mv
RM= rm
RMDIR= rmdir
SED= sed
SORT= sort
TOUCH= touch
TRUE= true

# EXTRA_CFLAGS are flags given to ${CC} when compiling C files
# EXTRA_LDFLAGS are flags given to ${CC} when linking progs
#
# Both CFLAGS and LDFLAGS are left blank in this Makefile by
# default so that users may use them on the make command line
# to always the way that C is compiled and files are linked
# respectively.  For example:
#
#	make all EXTRA_CFLAGS="-DMAGIC" EXTRA_LDFLAGS="-lmagic"
#
# NOTE: These should be left blank in this Makefile to make it
#       easier to add stuff on the command line.  If you want to
#	to change the way calc is compiled by this Makefile, change
#	the appropriate host target section below or a flag above.
#
EXTRA_CFLAGS=
EXTRA_LDFLAGS=

# COMMON_CFLAGS are the common ${CC} flags used for all progs, both
#	    intermediate and final calc and calc related progs
#
COMMON_CFLAGS= -DCALC_SRC ${ALLOW_CUSTOM} ${CCWARN} ${CCMISC} ${EXTRA_CFLAGS}

# COMMON_LDFLAGS are the common flags used for linking all progs, both
#	     intermediate and final calc and calc related progs
#
COMMON_LDFLAGS= ${EXTRA_LDFLAGS}

###########################################
# Set the default compile flags for ${CC} #
###########################################

#if 0	/* start of skip for non-Gnu makefiles */

# Required flags to compile C files for calc
#
# ICFLAGS are given to ${CC} for intermediate progs used to help compile calc
# CFLAGS are given to ${CC} for calc progs other than intermediate progs
#
# NOTE: This does not work for: make-XYZ-only and BLD_TYPE != make-XYZ-only
#
ifeq ($(BLD_TYPE),calc-static-only)
ICFLAGS= ${COMMON_CFLAGS} ${CCBAN} ${CC_STATIC}
else
ICFLAGS= ${COMMON_CFLAGS} ${CCBAN} ${CC_SHARE}
endif
CFLAGS= ${ICFLAGS} ${CCOPT}

# Required flags to link files for calc
#
# ILDFLAGS for ${CC} in linking intermediate progs used to help compile calc
# LDFLAGS for ${CC} in linking calc progs other than intermediate progs
#
ILDFLAGS= ${COMMON_LDFLAGS}
LDFLAGS= ${LD_DEBUG} ${ILDFLAGS}

#endif	/* end of skip for non-Gnu makefiles */

##################################################
# NOTE: End of section from custom/Makefile.head #
##################################################