Release calc version 2.12.4.3

BUGS

@@ -29,18 +29,25 @@ The calc web site is located at:
 =-=
 
 If you have tried all of the above and things still are not right,
-then it may be time to send in a bug report.  You can send bug reports to:
+then it may be time to send in a bug report.  You can send bug
+and bug fixes reports to:
 
     calc-bugs at asthe dot com
 
     [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
     [[ NOTE: The EMail address uses 'asthe', the web site URL uses 'isthe' ]]
 
+Your subject must contain the words:
+
+       calc bug report
+
+You may have additional words in your subject line.
+
 When you send your report, please include the following information:
 
     * a description of the problem
     * the version of calc you are using (if you cannot get calc
-      it to run, then send us the 4 #define lines from version.c)
+      to run, then send us the 4 #define lines from version.c)
     * if you modified calc from an official patch, send me the mods you made
     * the type of system you were using
     * the type of compiler you were using
@@ -54,18 +61,8 @@ When you send your report, please include the following information:
 
 Stack traces from core dumps are useful to send as well.
 
-=-=
-
-Send any comments, compiler warning messages, suggestions and most
-importantly, fixes (in the form of a context diff patch) to:
-
-    calc-bugs at asthe dot com
-
-    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-    [[ NOTE: The EMail address uses 'asthe', the web site URL uses 'isthe' ]]
-
-You should use the above calc-bugs address for bug reports, if you are
-not currently a member of the calc-tester mailing list.
+Fell free to use the above address to send in big fixes (in the form
+of a context diff patch).
 
 =-=
 
@@ -77,136 +74,38 @@ Known bugs:
 
 =-=
 
-Problems with known work-a-rounds:
+Problems that have known work-a-rounds:
 
-    * There is a bug in gcc-2.95 that causes calc, when compiled with -O2,
-      to fail the regression test.  The work-a-round is to compile with -O
-      or to use gcc-2.96 or later.
+    * There is a bug in gcc v4.1.0 that causes calc to fail the regression
+      test.  The work-a-round is to compile with gcc v4.1.1 or later.  This
+      problems was observed on Fedora 5.
 
-      This bug has been observed on the Sparc and the PowerPC machine.
+=-=
 
-      On the PowerPC with gcc-2.95 when compiled with -O2, the following
-      patch seems to help:
+mis-features in calc:
 
-*** zfunc.c.orig        Fri Feb 23 18:18:39 2001
---- zfunc.c     Fri Feb 23 18:39:33 2001
-***************
-*** 1481,1487 ****
-  {
-        HALF *a, *A, *b, *a0, u;
-        int i, j, j1, j2, k, k1, m, m0, m1, n, n0, o;
-!       FULL d, e, f, g, h, s, t, x, topbit;
-        int remsign;
-        BOOL up, onebit;
-        ZVALUE sqrt;
---- 1481,1488 ----
-  {
-        HALF *a, *A, *b, *a0, u;
-        int i, j, j1, j2, k, k1, m, m0, m1, n, n0, o;
-!       volatile FULL d;
-!       FULL e, f, g, h, s, t, x, topbit;
-        int remsign;
-        BOOL up, onebit;
-        ZVALUE sqrt;
-*** zmath.c	2000/06/07 14:02:13	29.2
---- zmath.c	2001/03/13 19:47:03
-***************
-*** 1608,1614 ****
-  void
-  zbitvalue(long n, ZVALUE *res)
-  {
-! 	ZVALUE z;
+    Some problems are not bugs but rarther mis-features / things that could
+    work better.  The following is a list of mis-features that should be
+    addressed and improved someday.
 
-  	if (n < 0) n = 0;
-  	z.sign = 0;
---- 1608,1614 ----
-  void
-  zbitvalue(long n, ZVALUE *res)
-  {
-! 	volatile ZVALUE z;
+    * When statement is of the form { ... }, the leading { MUST BE ON
+      THE SAME LINE as the if, for, while or do keyword.
 
-  	if (n < 0) n = 0;
-  	z.sign = 0;
+      This works as expected:
 
-    * Solaris cc somtimes barfs while compiling zrand.c.  In particular, calc
-      barfs on on the SVAL macro.  The work-a-round is to use the Solaric cc
-      Makefile set sets -DFORCE_STDC.  I.e,:
+	if (expr) {
+	    ...
+	}
 
-	    CCWARN=
-	    CCOPT= ${DEBUG} ${NO_SHARED}
-	    CCMISC= -DFORCE_STDC
-	    #
-	    CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
-	    ICFLAGS= ${CCWARN} ${CCMISC}
-	    #
-	    LCFLAGS=
-	    LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
-	    ILDFLAGS=
-	    #
-	    LCC= cc
-	    CC= ${PURIFY} ${LCC}
+      However this WILL NOT WORK AS EXPECTED:
 
-    * There is a bug in some versions of the Dec/Compaq cc for the Alpha
-      where the following:
+	if (expr)
+	{
+	    ...
+	}
 
-	    #include <stdio.h>
-	    #define SVAL(a,b) (unsigned long)(0x ## a ## b ## ULL)
-	    main(){SVAL(b8a8aeb0,8168eadc);}
-
-      fails because it puts a space inside the concatenated hex.  Calc
-      has code that is affected by this bug.  This bug has been reported
-      to Compaq and may be fixed in the future.	 A work-a-round is to
-      compile with cc -std0 or to use a later version of their compiler.
-
-    * On a Digital UNIX V4.0F (Rev. 1229) on a 500 Mhz 21264, make check
-      dies a horrible death starting in test 600 and 622 gives 100s of
-      messages for calc version 2.11.0t9.4 using the Dec's cc with -O2:
-
-	600: Beginning test_bignums
-	601: muldivcheck 1
-	**** abc != acb: 602: muldivcheck 2
-	**** acb != bac: 602: muldivcheck 2
-	...
-	**** t4 != a4: 622: algcheck 1
-	**** t5 != a5: 622: algcheck 1
-	**** t6 != a6: 622: algcheck 1
-	**** t4 != a4: 622: algcheck 1
-	...
-
-	it finally hangs at test 2000.
-
-      The work-a-round is to compile calc without the optimizer.  If this
-      happens to you, try compiling without -O and without -O2.	 I.e., in
-      the Makefile, set:
-
-	DEBUG= -g
-
-    * There are problems compiling calc on the sparcv9 under 64 bit
-      Solaris.	On that platform, gcc-2.96 is able to compile calc, but
-      calc dumps core very early on in startup.	 It is said that sparcv9
-      support in gcc-2.96 is very unofficial and thus there is no
-      work-a-round for gcc-2-96.
-
-      There is a work-a-round for this architecture us one is using the
-      Solaris CC on the sparcv9.  It has been reported that setting the
-      following Makefile variables will produce a working version of
-      calc on the sparcv9 under 64 bit Solaris:
-
-	    LCC="cc -xarch=v9"
-	    CCWARN="-DFORCE_STDC -w"
-	    DEBUG="-fast -xarch=v9"
-
-    * Under BSDI v4, the warnings of the form:
-
-	/usr/include/ctype.h:147: warning: `__runetype' defined but not used
-	/usr/include/ctype.h:161: warning: `__isctype' defined but not used
-	/usr/include/ctype.h:170: warning: `toupper' defined but not used
-	/usr/include/ctype.h:177: warning: `tolower' defined but not used
-
-      are seen.	 These warnings are the result of mis-features in BSDI
-      include files.  They do not have an impact on the operation
-      or performance.  The work-a-round is to ignore these warnings
-      under BSDI.
+      This needs to be changed.  See also "help statement", "help unexpected",
+      and "help todo".
 
     * The chi.cal resource file does not work well with odd degrees
       of freedom.  Can someone improve this algorithm?
@@ -230,7 +129,7 @@ Problems with known work-a-rounds:
 
       will not.
 
-## Copyright (C) 1999  Landon Curt Noll
+## Copyright (C) 1999-2007  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -244,10 +143,10 @@ Problems with known work-a-rounds:
 ## A copy of version 2.1 of the GNU Lesser General Public License is
 ## distributed with calc under the filename COPYING-LGPL.  You should have
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
-## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 29.10 $
-## @(#) $Id: BUGS,v 29.10 2001/04/08 11:32:52 chongo Exp $
+## @(#) $Revision: 30.1 $
+## @(#) $Id: BUGS,v 30.1 2007/03/16 11:09:46 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/BUGS,v $
 ##
 ## Under source code control:	1994/03/18 14:06:13

COPYING

@@ -6,14 +6,14 @@ This file is Copyrighted
 
     This file is covered under the following Copyright:
 
-	Copyright (C) 1999  Landon Curt Noll
+	Copyright (C) 1999-2008  Landon Curt Noll
 	All rights reserved.
 
 	Everyone is permitted to copy and distribute verbatim copies
 	of this license document, but changing it is not allowed.
 
-    # @(#) $Revision: 29.5 $
-    # @(#) $Id: COPYING,v 29.5 2000/12/18 10:22:55 chongo Exp $
+    # @(#) $Revision: 30.2 $
+    # @(#) $Id: COPYING,v 30.2 2008/10/24 10:46:52 chongo Exp $
     # @(#) $Source: /usr/local/src/cmd/calc/RCS/COPYING,v $
 
 =-=
@@ -45,23 +45,28 @@ Calc is covered by the GNU Lesser General Public License
     Public License by the calc command:			help copying-lgpl
 
     You should have received a copy of the version 2.1 GNU Lesser General
-    Public License with calc; if not, write to:
+    Public License with calc; if not, write to the following address:
 
 	    Free Software Foundation, Inc.
-	    59 Temple Place
-	    Suite 330
-	    Boston, MA	02111-1307
+	    51 Franklin Street
+	    Fifth Floor
+	    Boston, MA  02110-1301
 	    USA
 
     The contact addresses for calc is as follows:
 
-	Web:	http://www.isthe.com/chongo/tech/comp/calc/index.html
-	EMail:	calc-contrib at asthe dot com
+	Web:	http://www.isthe.com/chongo/tech/comp/calc/email.html
 
-    To join the calc-tester mailing list.  Send a request to:
+    To join the low volume calc mailing list.  Send a EMail message to:
 
 	calc-tester-request at asthe dot com
 
+    Your subject must contain the words:
+
+	calc mailing list subscription
+
+    You may have additional words in your subject line.
+
     Your message body (not the subject) should consist of:
 
 	 subscribe calc-tester address
@@ -71,13 +76,23 @@ Calc is covered by the GNU Lesser General Public License
     where ``address'' is your EMail address and ``your_full_name'' is
     your full name.
 
-    Calc bug reports, however should be sent to:
+    Feel free to follow the name line with additional EMail text as desired.
+
+=-=
+
+    Calc bug reports and calc bug fixes should be sent to:
 
 	calc-bugs at asthe dot com
 
     [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
     [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
 
+    Your subject must contain the words:
+
+	   calc bug report
+
+    You may have additional words in your subject line.
+
 =-=
 
 Calc's relationship to the GNU Lesser General Public License
@@ -149,12 +164,12 @@ Calc copyrights and exception files
 	Copyright (C) year  Landon Curt Noll
 	Copyright (C) year  Ernest Bowen and Landon Curt Noll
 	Copyright (C) year  Ernest Bowen
+	Copyright (C) year  Petteri Kettunen and Landon Curt Noll
 
     These files are not covered under one of the Copyrights listed above:
 
-	    shs1.c	    shs1.h	 shs.c		shs.h
-	    md5.c	    md5.h	 COPYING	COPYING-LGPL
-	    cal/qtime.cal
+	    sha1.c		sha1.h		COPYING
+	    COPYING-LGPL	cal/qtime.cal	cal/screen.cal
 
     The file COPYING-LGPL, which contains a copy of the version 2.1
     GNU Lesser General Public License, is itself Copyrighted by the
@@ -166,9 +181,8 @@ Calc copyrights and exception files
     top of this file.  It is important to note that you may distribute
     verbatim copies of this file but you may not modify this file.
 
-    Some of these exception files are in the public domain.  Other
-    exception files have non-LGPL Copyrights.  Other files are under a
-    LGPL Copyright but have different authors.
+    Some of these exception files are in the public domain.  Other files
+    are under the LGPL but have different authors that those listed above.
 
     In all cases one may use and distribute these exception files freely.
     And because one may freely distribute the LGPL covered files, the

COPYING-LGPL

@@ -2,7 +2,7 @@
 		       Version 2.1, February 1999
 
  Copyright (C) 1991, 1999 Free Software Foundation, Inc.
-     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -476,7 +476,7 @@ convey the exclusion of warranty; and each file should have at least the
     This library is free software; you can redistribute it and/or
     modify it under the terms of the GNU Lesser General Public
     License as published by the Free Software Foundation; either
-    version 2 of the License, or (at your option) any later version.
+    version 2.1 of the License, or (at your option) any later version.
 
     This library is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -485,7 +485,7 @@ convey the exclusion of warranty; and each file should have at least the
 
     You should have received a copy of the GNU Lesser General Public
     License along with this library; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 
 Also add information on how to contact you by electronic and paper mail.
 

HOWTO.INSTALL

@@ -1,34 +1,158 @@
-Installing calc in 4 easy steps:
+Installing calc from the bzip2-ed tarball in 4 easy steps:
 
-    1) Look at the makefile, and adjust it to suit your needs.
+    0)  If your platform supports i686 RPMs, you may want to go to:
 
-       Here are some Makefile hints:
+	    http://www.isthe.com/chongo/src/calc/
 
-	   Select a compiler set by commenting in the appropriate set
-	   of cc options.  As shipped the Makefile assumes a gcc-like
-	   environment such as Linux.  If a more appropriate cc set if
-	   found below, comment out the Linux set and comment in that
-	   set or edit the gcc set or the common cc set as needed.
+	and use these RPMs:
 
-	   You may or may not need RANLIB when building libraries.
-	   As shipped the Makefile assumes RANLIB is needed.
-	   Comment the in/out the RANLIB value if ranlib does
-	   not work or does not exist.
+	    * calc*.i686.rpm
+		- all that is needed if you just want to use calc
 
-	   You may want to change the default pager used by calc.
-	   As shipped the Makefile assumes 'more'.  On your system
-	   you may find 'less' to be a better pager.
+	    * calc-devel-*.i686.rpm
+	        - calc *.h header and *.a lib files for use in other programs
 
-	   Set TOPDIR to be the place under which help files, calc,
-	   include files and calc libs are to be installed.  As shipped
-	   the Makefile assumes a TOPDIR of /usr/local/lib.
+	    * calc.*.src.rpm
+	        - calc source in RPM package form
 
-	   Set BINDIR to the place where calc is installed.  As shipped
-	   the Makefile assumes a BINDIR /usr/local/bin.
+	The following 4 steps apply to calc source tree that comes from either:
+
+		bunzip2 -c calc-*.tar.bz2 | tar -xvf -
+
+	or from:
+
+		rpm -ivh calc-*.src.rpm
+		cd /var/tmp
+		bunzip2 -c /usr/src/redhat/SOURCES/calc-*.tar.bz2 | tar -xvf -
+
+    1)	Look at the makefile, and adjust it to suit your needs.
+
+	The top level Makefile and the custom/Makefile require a GNU
+	Make (such as gmake) or an equivalently advanced make.	On many
+	targets, the default make is sufficent.  On FreeBSD for example,
+	one must use gmake instead of make.
+
+	If your target system does not have GNU Make (or equivalent), then
+	you should try using the Makefile.simple and custom/Makefile.simple
+	files:
+
+	    mv Makefile Makefile.gmake
+	    cp Makefile.simple Makefile
+	    mv custom/Makefile custom/Makefile.gmake
+	    cp custom/Makefile.simple custom/Makefile
+
+	The Makefile, as shipped, is suitable for installation under
+	Linux and Un*x-like environments.  For the most part, the default
+	values should work.  If in doubt, follow the 'When in doubt'
+	suggestion.
+
+	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+	! If you are building under Windoz or a Windoz-like environment !
+	! (such as Cygwin or DJGPP), read the README.WINDOWS file.      !
+	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+	You should determine if these Makefile variables are reasonable:
+
+	    INCDIR		Where the system include (.h) files are kept.
+	    BINDIR		Where to install calc binary files.
+	    LIBDIR		Where to install calc link library (*.a) files.
+	    CALC_SHAREDIR	Where to install calc help, .cal, startup, and
+	    			config files.
+
+	You may want to change the default installation locations for
+	these values, which are based on the 4 values listed above:
+
+	    HELPDIR            where the help directory is installed
+	    CALC_INCDIR        where the calc include files are installed
+	    CUSTOMCALDIR       where custom *.cal files are installed
+	    CUSTOMHELPDIR      where custom help files are installed
+	    CUSTOMINCDIR       where custom .h files are installed
+	    SCRIPTDIR          where calc shell scripts are installed
+
+	If you want to install calc files under a top level directory,
+	then set the T value:
+
+	    The calc install is performed under ${T}, the calc build is
+	    performed under /.	The purpose for ${T} is to allow someone
+	    to install calc somewhere other than into the system area.
+
+	    For example, if:
+
+	    	BINDIR= /usr/bin
+		LIBDIR= /usr/lib
+		CALC_SHAREDIR= /usr/share/calc
+
+	    and if:
+
+	    	T= /var/tmp/testing
+
+	    Then the installation locations will be:
+
+		calc binary files:	/var/tmp/testing/usr/bin
+		calc link library:	/var/tmp/testing/usr/lib
+		calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+		... etc ...		/var/tmp/testing/...
+
+	    If ${T} is empty, calc is installed under /, which is the same
+	    top of tree for which it was built.  If ${T} is non-empty, then
+	    calc is installed under ${T}, as if one had to chroot under
+	    ${T} for calc to operate.
+
+	Look for the section that starts:
+
+	    ################
+	    # compiler set #
+	    ################
+
+	    Select a compiler set by commenting in the appropriate set
+	    of cc options.  As shipped the Makefile assumes a gcc-like
+	    environment such as Linux.  If a more appropriate cc set if
+	    found below, comment out the Linux set and comment in that
+	    set or edit the gcc set or the common cc set as needed.
+
+	You may want to change these Makrfile variables from their defaults:
+
+	    RANLIB
+
+		You may or may not need RANLIB when building libraries.
+		As shipped the Makefile assumes RANLIB is needed.
+		Comment the in/out the RANLIB value if ranlib does
+		not work or does not exist.
+
+	    CALCPAGER
+
+		You may want to change the default pager used by calc.
+		As shipped the Makefile assumes 'more'.  On your system
+		you may find 'less' to be a better pager.
+
+	    DEBUG
+
+	       Some compilers (to put it mildly) have bugs.  Sometimes the
+	       DEBUG Makefile variable causes the compiler / optimizer to
+	       produce bad code.  Other compilers do just fine.
+
+	       If possible try to use DEBUG=-O3 -g3 (maximum optimization
+	       and debug symbols).  If the calc test fails (see step 3),
+	       try lowering either the -O value and/or the -g3.  Also try
+	       using -Osomething without -g.
 
 	   Adjust other Makefile variables as needed.
 
-    2) build calc:
+    2)	build calc:
+
+	The top level Makefile and the custom/Makefile require a GNU
+	Make (such as gmake) or an equivalently advanced make.	On many
+	targets, the default make is sufficent.  On FreeBSD for example,
+	one must use gmake instead of make.
+
+	If your target system does not have GNU Make (or equivalent), then
+	you should try using the Makefile.simple and custom/Makefile.simple
+	files:
+
+	    mv Makefile Makefile.gmake
+	    cp Makefile.simple Makefile
+	    mv custom/Makefile custom/Makefile.gmake
+	    cp custom/Makefile.simple custom/Makefile
 
 	make all
 
@@ -36,20 +160,35 @@ Installing calc in 4 easy steps:
 	    you may find.  See the BUGS file if you find any compiler
 	    warning or errors.
 
-    3) test calc:
+	NOTE: You can force calc to build with only static libs:
+
+		make clobber
+		make calc-static-only BLD_TYPE=calc-static-only
+
+	      or force calc to build with only dynamic libs:
+
+		make clobber
+		make calc-dynamic-only BLD_TYPE=calc-dynamic-only
+
+    3)	test calc:
 
 	make check
 
-	==> If you run into problems, follow the BUGS file instructions.
+	==> If you run into problems, read the BUGS file and follow
+	    the instructions found in there.
 
-    4) install calc:
+	NOTE: For a quiet check which only prints if something goes wrong:
+
+		make chk
+
+    4)	install calc:
 
 	make install
 
 We suggest that you might want to read the README file and look at
 the calc help subsystem.  See the README file for details.
 
-## Copyright (C) 1999  Landon Curt Noll
+## Copyright (C) 1999-2007  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -63,10 +202,10 @@ the calc help subsystem.  See the README file for details.
 ## A copy of version 2.1 of the GNU Lesser General Public License is
 ## distributed with calc under the filename COPYING-LGPL.  You should have
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
-## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: HOWTO.INSTALL,v 29.2 2000/06/07 14:02:13 chongo Exp $
+## @(#) $Revision: 30.6 $
+## @(#) $Id: HOWTO.INSTALL,v 30.6 2007/10/16 12:22:22 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/HOWTO.INSTALL,v $
 ##
 ## Under source code control:	1999/09/27 20:48:44

LIBRARY

@@ -48,78 +48,245 @@ convenient for outside use.  So you should read the source for a routine
 to see if it really does what you think it does.  I won't guarantee that
 obscure internal routines won't change or disappear in future releases!
 
-When calc is installed, all of the include files needed to build
-libcalc.a along with the link library itself are installed into ${LIBDIR}.
+When calc is installed, all of libraries are installed into ${LIBDIR}.
+All of the calc header files are installed under ${INCDIRCALC}.
+
+If CALC_SRC is defined, then the calc header files will assume that
+they are in or under the current directory.  However, most external
+programs most likely will not be located under calc'c source tree.
+External programs most likely want to use the installed calc header
+files under ${INCDIRCALC}.  External programs most likely NOT want
+to define CALC_SRC.
+
+You need to include the following file to get the symbols and variables
+related to error handling:
+
+	lib_calc.h
 
 External programs may want to compile with:
 
-	-I${LIBDIR} -L${LIBDIR} -lcalc
+	-I${INCDIR} -L${LIBDIR} -lcalc
 
---------------
-ERROR HANDLING
---------------
+If custom functions are also used, they may want to compile with:
 
-Your program MUST provide a function called math_error.	 This is called by
-the math routines on an error condition, such as malloc failures or a
-division by zero.  The routine is called in the manner of printf, with a
-format string and optional arguments.  (However, none of the low level math
-routines currently uses formatting, so if you are lazy you can simply use
-the first argument as a simple error string.)  For example, one of the
-error calls you might expect to receive is:
+	-I${INCDIR} -L${LIBDIR} -lcalc -lcustcalc
 
-	math_error("Division by zero");
+The CALC_SRC symbol should NOT be defined by default.  However if you are
+feeling pedantic you may want to force CALC_SRC to be undefined:
 
-Your program can handle errors in basically one of two ways.  Firstly, it
-can simply print the error message and then exit.  Secondly, you can make
-use of setjmp and longjmp in your program.  Use setjmp at some appropriate
-level in your program, and use longjmp in the math_error routine to return
-to that level and so recover from the error.  This is what the calc program
-does.
+	-UCALC_SRC
 
-For convenience, the link library libcalc.a contains a math_error routine.
-By default, this routine simply prints a message to stderr and then exits.
-By simply linking in this link library, any calc errors will result in a
-error message on stderr followed by an exit.
+as well.
 
-External programs that wish to use this math_error may want to compile with:
+-------------------
+MATH ERROR HANDLING
+-------------------
 
-	-I${LIBDIR} -L${LIBDIR} -lcalc
+The math_error() function is called by the math routines on an error
+condition, such as malloc failures, division by zero, or some form of
+an internal computation error.  The routine is called in the manner of
+printf, with a format string and optional arguments:
 
-If one sets up calc_jmp_buf, and then sets calc_jmp to non-zero then
-this routine will longjmp back (with the value of calc_jmp) instead.
-In addition, the last calc error message will be found in calc_error;
-this error is not printed to stderr.  The calc error message will
-not have a trailing newline.
+	    void math_error(char *fmt, ...);
 
-For example:
+Your program must handle math errors in one of three ways:
 
-    #include <setjmp.h>
+    1) Print the error message and then exit
 
-    extern jmp_buf calc_jmp_buf;
-    extern int calc_jmp;
-    extern char *calc_error;
-    int error;
+	There is a math_error() function supplied with the calc library.
+	By default, this routine simply prints a message to stderr and
+	then exits.  By simply linking in this link library, any calc
+	errors will result in a error message on stderr followed by
+	an exit.
 
-    ...
+    2) Use setjmp and longjmp in your program
 
-    if ((error = setjmp(calc_jmp_buf)) != 0) {
+	Use setjmp at some appropriate level in your program, and let
+	the longjmp in math_error() return to that level and to allow you
+	to recover from the error.  This is what the calc program does.
 
-	    /* reinitialize calc after a longjmp */
-	    reinitialize();
+	If one sets up calc_matherr_jmpbuf, and then sets
+	calc_use_matherr_jmpbuf to non-zero then math_error() will
+	longjmp back with the return value of calc_use_matherr_jmpbuf.
+	In addition, the last calc error message will be found in
+	calc_err_msg; this error is not printed to stderr.  The calc
+	error message will not have a trailing newline.
+
+	For example:
+
+	    #include <setjmp.h>
+	    #include "lib_calc.h"
+
+	    int error;
+
+	    ...
+
+	    if ((error = setjmp(calc_matherr_jmpbuf)) != 0) {
+
+		    /* report the error */
+		    printf("Ouch: %s\n", calc_err_msg);
+
+		    /* reinitialize calc after the longjmp */
+		    reinitialize();
+	    }
+	    calc_use_matherr_jmpbuf = 1;
+
+	If calc_use_matherr_jmpbuf is non-zero, then the jmp_buf value
+	calc_matherr_jmpbuf must be initialized by the setjmp() function
+	or your program will crash.
+
+    3) Supply your own math_error function:
+
+	    void math_error(char *fmt, ...);
+
+	Your math_error() function may exit or transfer control to outside
+	of the calc library, but it must never return or calc will crash.
+
+External programs can obtain the appropriate calc symbols by compiling with:
+
+	-I${INCDIR} -L${LIBDIR} -lcalc
+
+-------------------------
+PARSE/SCAN ERROR HANDLING
+-------------------------
+
+The scanerror() function is called when calc encounters a parse/scan
+error.  For example, scanerror() is called when calc is given code
+with a syntax error.
+
+The variable, calc_print_scanerr_msg, controls if calc prints to stderr,
+any parse/scan errors.  By default, this variable it set to 1 and so
+parse/scan errors are printed to stderr.  By setting this value to zero,
+parse/scan errors are not printed:
+
+	#include "lib_calc.h"
+
+	/* do not print parse/scan errors to stderr */
+	calc_print_scanerr_msg = 0;
+
+The last calc math error or calc parse/scan error message is kept
+in the NUL terminated buffer:
+
+	char calc_err_msg[MAXERROR+1];
+
+The value of calc_print_scanerr_msg does not change the use
+of the calc_err_msg[] buffer.  Messages are stored in that
+buffer regardless of the calc_print_scanerr_msg value.
+
+The calc_print_scanerr_msg and the calc_err_msg[] buffer are declared
+lib_calc.h include file.  The initialized storage for these variables
+comes from the calc library.  The MAXERROR symbol is also declared in
+the lib_calc.h include file.
+
+Your program must handle parse/scan errors in one of two ways:
+
+    1) exit on error
+
+	If you do not setup the calc_scanerr_jmpbuf, then when calc
+	encounters a parse/scan error, a message will be printed to
+	stderr and calc will exit.
+
+    2) Use setjmp and longjmp in your program
+
+	Use setjmp at some appropriate level in your program, and let
+	the longjmp in scanerror() return to that level and to allow you
+	to recover from the error.  This is what the calc program does.
+
+	If one sets up calc_scanerr_jmpbuf, and then sets
+	calc_use_scanerr_jmpbuf to non-zero then scanerror() will longjmp
+	back with the return with a non-zero code.  In addition, the last
+	calc error message will be found in calc_err_msg[]; this error is
+	not printed to stderr.	The calc error message will not have a
+	trailing newline.
+
+	For example:
+
+	    #include <setjmp.h>
+	    #include "lib_calc.h"
+
+	    int scan_error;
+
+	    ...
+
+	    /* delay the printing of the parse/scan error */
+	    calc_use_scanerr_jmpbuf = 0;	/* this is optional */
+
+	    if ((scan_error = setjmp(calc_scanerr_jmpbuf)) != 0) {
+
+		    /* report the parse/scan */
+		    if (calc_use_scanerr_jmpbuf == 0) {
+			    printf("parse error: %s\n", calc_err_msg);
+	    	    }
+
+		    /* initialize calc after the longjmp */
+		    initialize();
+	    }
+	    calc_use_scanerr_jmpbuf = 1;
+
+	If calc_use_scanerr_jmpbuf is non-zero, then the jmp_buf value
+	calc_scanerr_jmpbuf must be initialized by the setjmp() function
+	or your program will crash.
+
+External programs can obtain the appropriate calc symbols by compiling with:
+
+	-I${INCDIR} -L${LIBDIR} -lcalc
+
+---------------------------
+PARSE/SCAN WARNING HANDLING
+---------------------------
+
+Calc parse/scan warning message are printed to stderr by the warning()
+function.  The routine is called in the manner of printf, with a format
+string and optional arguments:
+
+	void warning(char *fmt, ...);
+
+The variable, calc_print_scanwarn_msg, controls if calc prints to stderr,
+any parse/scan warnings.  By default, this variable it set to 1 and so
+parse/scan warnings are printed to stderr.  By setting this value to zero,
+parse/scan warnings are not printed:
+
+	#include "lib_calc.h"
+
+	/* do not print parse/scan warnings to stderr */
+	calc_print_scanwarn_msg = 0;
+
+The last calc calc parse/scan warning message is kept in the NUL
+terminated buffer:
+
+	char calc_warn_msg[MAXERROR+1];
+
+The value of calc_print_scanwarn_msg does not change the use
+of the calc_warn_msg[] buffer.  Messages are stored in that
+buffer regardless of the calc_print_scanwarn_msg value.
+
+Your program must handle parse/scan warnings in one of two ways:
+
+    1) print the warning to stderr and continue
+
+	The warning() from libcalc prints warning messages to
+	stderr and returns.  The flow of execution is not changed.
+	This is what calc does by default.
+
+    2) Supply your own warning function:
+
+	    void warning(char *fmt, ...);
+
+	Your warning function should simply return when it is finished.
+
+External programs can obtain the appropriate calc symbols by compiling with:
+
+	-I${INCDIR} -L${LIBDIR} -lcalc
 
-	    /* report the error */
-	    printf("Ouch: %s\n", calc_error);
-    }
-    calc_jmp = 1;
 
 ---------------
 OUTPUT ROUTINES
 ---------------
 
-The output from the routines in the link library normally goes to stdout.  You
-can divert that output to either another FILE handle, or else to a string.
-Read the routines in zio.c to see what is available.  Diversions can be
-nested.
+The output from the routines in the link library normally goes to stdout.
+You can divert that output to either another FILE handle, or else
+to a string.  Read the routines in zio.c to see what is available.
+Diversions can be nested.
 
 You use math_setfp to divert output to another FILE handle.  Calling
 math_setfp with stdout restores output to stdout.
@@ -469,10 +636,10 @@ need call libcalc_call_me_last() only once.
 ## A copy of version 2.1 of the GNU Lesser General Public License is
 ## distributed with calc under the filename COPYING-LGPL.  You should have
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
-## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: LIBRARY,v 29.2 2000/06/07 14:02:13 chongo Exp $
+## @(#) $Revision: 30.1 $
+## @(#) $Id: LIBRARY,v 30.1 2007/03/16 11:09:46 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/LIBRARY,v $
 ##
 ## Under source code control:	1993/07/30 19:44:49

README

@@ -73,13 +73,19 @@ for a wish/todo list.  Code contributions are welcome.
 
 =-=
 
-To join the calc-tester mailing list.  Send a request to:
+To join the calc-tester mailing list.  Send an EMail message to:
 
     calc-tester-request at asthe dot com
 
     [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
     [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
 
+Your subject must contain the words:
+
+    calc mailing list subscription
+
+You may have additional words in your subject line.
+
 Your message body (not the subject) should consist of:
 
      subscribe calc-tester address
@@ -89,7 +95,11 @@ Your message body (not the subject) should consist of:
 where ``address'' is your EMail address and ``your_full_name'' is
 your full name.
 
-Calc bug reports, however should be sent to:
+Feel free to follow the name line with additional EMail text as desired.
+
+=-=
+
+Send Calc bug and bug fixes to:
 
     calc-bugs at asthe dot com
 
@@ -98,6 +108,12 @@ Calc bug reports, however should be sent to:
 
 but see the BUGS file first.
 
+Your subject must contain the words:
+
+       calc bug report
+
+You may have additional words in your subject line.
+
 The calc web site is located at:
 
 	http://www.isthe.com/chongo/tech/comp/calc/
@@ -116,10 +132,10 @@ The calc web site is located at:
 ## A copy of version 2.1 of the GNU Lesser General Public License is
 ## distributed with calc under the filename COPYING-LGPL.  You should have
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
-## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: README,v 29.2 2000/06/07 14:02:13 chongo Exp $
+## @(#) $Revision: 30.1 $
+## @(#) $Id: README,v 30.1 2007/03/16 11:09:46 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/README,v $
 ##
 ## Under source code control:	1995/10/25 05:27:59

README.WINDOWS

@@ -3,15 +3,6 @@ Dear calc user on a Windoz based system,
 See the HOWTO.INSTALL file for information on how to build and install calc.
 See also the README file.
 
-NOTE: The Windoz port is extremely experimental, untested and perhaps
-      incomplete.  We are in the process of making it easier.  The
-      following should help anyone who is trying to make a go of this
-      under the current code conditions.
-
-NOTE: We are currently ONLY making an effort to support building under
-      Windoz using the Cygwin project (http://sources.redhat.com/cygwin/)
-      with the GCC compiler and Un*x tools for Windows.
-
 NOTE: The main developers do not have access to a Windoz based platform.
       While we will make an effort to not break calc Windoz based system,
       our lack of a Windoz test environment will mean we will make mistakes
@@ -19,77 +10,123 @@ NOTE: The main developers do not have access to a Windoz based platform.
       Of course you are welcome to send us any patches that fix your
       Windoz build environment.
 
-=-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+=-= compiling with Cygwin =-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
 
 An effort is being made to allow windows users to compile calc using the
 Cygwin project (http://sources.redhat.com/cygwin/) with the GCC compiler
 and Un*x tools for Windows.
 
-The major porting work was performed by Thomas Jones-Low
-(tjoneslo at softstart dot com).  He said:
+The major porting work for Cygwin was performed by Thomas Jones-Low
+(tjoneslo at softstart dot com).
 
-    I had previous stated to this group that I have successfully managed
-    to port a version of Calc to Windows, and promised some point to
-    post what was required, so here it is.
+In March 2009, Michael Penk (mpenk at wuska dot com) reported success in
+installs under Cygwin:
 
-    One obvious manner of doing this port is to get the latest version
-    of the Cygwin project (http://sources.redhat.com/cygwin/) with the
-    GCC compiler and Un*x tools for Windows and recompile.
+    On my fairly complete Cygwin installs, everything compiles,
+    checks, and installs correctly.  My Cygwin is configured
+    in a very standard way (out of the box, using all of Cygwin's
+    defaults).  The install worked on 5 different machines with
+    Cygwin on them: one XP home, one XP professional, and three
+    Vista professionals.
 
-    I built my working version using Calc ... I am using Visual C++
-    version 7.0, which is an older version of the Microsoft development
-    tools. The make file provided with Calc is not compatible with
-    NMAKE, so I used the Visual Studio tools to generate another one
-    (not included). Calc is built in two parts, calc.dll, which is the
-    library, and calcexe.exe which is the command line interface.
+Using the calc Makefile, he did the following:
 
-He recommends that you generate by hand all of the header files generated
-by the make file:
+    make all target=Cygwin
+    make check
+    make install
 
-    align32.h args.h calcerr.h conf.h endian_calc.h
-    fposval.h have_const.h have_fpos.h have_fpos_pos.h have_malloc.h
-    have_memmv.h have_newstr.h have_offscl.h have_posscl.h
-    have_stdlib.h have_string.h have_times.h have_uid_t.h
-    have_unistd.h longbits.h longlong.h terminal.h
-    have_ustat.h have_getsid.h have_getpgid.h
-    have_gettime.h have_getprid.h have_urandom.h have_rusage.h
-    have_strdup.h
+He also reports:
+
+    Of course, one should be logged in as an Administrator when
+    one builds and installs calc.
+
+He was compiling calc 2.12.4.0 with Cygwin version 1.5.25-15.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+=-= If all else fails, for Cygwin =-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+Much earlier (2001?) Thomas Jones-Low (tjoneslo at softstart dot com)
+recommended that you generate by hand all of the header files that
+by the Makefile.  This has been done for you via the makefile rule:
+
+	make win32_hsrc
+
+which uses the Makefile variables in win32.mkdef to form these header
+files under win32 directory.
 
 You will find generated versions of these files located in the win32
 sub-directory.  These files may be appropriate for your Cygwin building
-needs.  Just copy the win32/*.[ch] files up into the top level calc
-source directory, edited (if needed) and build using the Cygwin GCC
-compiler.
+needs.
 
-=-=
+In particular:
 
-People who maintain calc need to keep in mind the following:
+	Just copy the win32/*.[ch] files up into the top level calc
+	source directory, edit them (if needed) and build using the
+	Cygwin GCC compiler and Cygwin build environment.
 
-The following was added to opcodes.h, config.h, zmath.h and value.h:
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+=-= compiling under DJGPP =-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
 
-	#if defined(_WIN32)
-	#ifdef _EXPORTING
-	  #define DLL	__declspec(dllexport)
-	#else
-	  #define DLL	__declspec(dllimport)
-	#endif
+You might want to try using the DJGPP system to compile calc.  See:
 
-	#else /* Windoz free systems */
+	http://www.delorie.com/djgpp/
 
-	  #define DLL
+for DJGPP details and availability.
 
-	#endif /* Windoz free systems */
+To compile with DJGPP, one needs to select a number of Makefile
+variable changes.  Eli Zaretskii <eliz at is dot elta dot co dot il>
+recommends the following settings:
 
-Then DLL was added in front of all the exported functions.  For example:
+	TERMCONTROL= -DUSE_TERMIOS
+	BYTE_ORDER= -DLITTLE_ENDIAN
+	LONG_BITS= 32
+	HAVE_FPOS_POS= -DHAVE_NO_FPOS_POS
+	FPOS_BITS= 32
+	OFF_T_BITS= 32
+	DEV_BITS= 32
+	INODE_BITS= 32
+	HAVE_USTAT= -DHAVE_NO_USTAT
+	HAVE_GETSID= -DHAVE_NO_GETSID
+	HAVE_GETPGID= -DHAVE_NO_GETPGID
+	HAVE_GETTIME= -DHAVE_NO_GETTIME
+	HAVE_GETPRID= -DHAVE_NO_GETPRID
+	HAVE_URANDOM_H= NO
+	ALIGN32= -UMUST_ALIGN32
+	HAVE_MALLOC_H= YES
+	HAVE_STDLIB_H= YES
+	HAVE_STRING_H= YES
+	HAVE_TIMES_H= NO
+	HAVE_SYS_TIMES_H= YES
+	HAVE_TIME_H= YES
+	HAVE_SYS_TIME_H= YES
+	HAVE_UNISTD_H= YES
+	BINDIR= /dev/env/DJDIR/bin
+	INCDIR= /dev/env/DJDIR/include
+	LIBDIR= /dev/env/DJDIR/lib
+	MANDIR= /dev/env/DJDIR/man/man1
+	CATDIR= /dev/env/DJDIR/man/cat1
+	NROFF= groff
+	CALCPATH= .;./cal;~/.cal;${CALC_SHAREDIR};${CUSTOMCALDIR}
+	CALCRC= ${CALC_SHAREDIR}/startup;~/.calcrc;./.calcinit
+	CALCPAGER= less.exe -ci
+	DEBUG= -O2 -gstabs+ -DWINDOZ
 
-    extern int configtype(char*);
+The 'Linux set' or 'gcc set' (see the Select your compiler type section)
+should work for DJGPP systems if you set the above Makefile variables.
 
-was changed to:
+Look for Makefile comments of the form:
 
-    DLL extern int configtype(char*);
+	# Select ...something... for DJGPP.
+
+Follow those recommendations.  In cases where they conflict with
+the above Makefile list, follow the recommendation in the Makefile.
 
 
-## Copyright (C) 2001  Landon Curt Noll and Thomas Jones-Low
+## Copyright (C) 2002-2009  Landon Curt Noll and Thomas Jones-Low
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -103,10 +140,10 @@ was changed to:
 ## A copy of version 2.1 of the GNU Lesser General Public License is
 ## distributed with calc under the filename COPYING-LGPL.  You should have
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
-## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 29.6 $
-## @(#) $Id: README.WINDOWS,v 29.6 2001/04/08 22:13:38 chongo Exp $
+## @(#) $Revision: 30.2 $
+## @(#) $Id: README.WINDOWS,v 30.2 2009/03/14 02:29:31 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/README.WINDOWS,v $
 ##
 ## Under source code control:	2001/02/25 14:00:05

addop.c

@@ -1,7 +1,7 @@
 /*
  * addop - add opcodes to a function being compiled
  *
- * Copyright (C) 1999  David I. Bell and Ernest Bowen
+ * Copyright (C) 1999-2007  David I. Bell and Ernest Bowen
  *
  * Primary author:  David I. Bell
  *
@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: addop.c,v 29.3 2000/07/17 15:35:49 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: addop.c,v 30.1 2007/03/16 11:09:46 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/addop.c,v $
  *
  * Under source code control:	1990/02/15 01:48:10
@@ -33,7 +33,7 @@
 #include <stdio.h>
 #include "calc.h"
 #include "opcodes.h"
-#include "string.h"
+#include "str.h"
 #include "func.h"
 #include "token.h"
 #include "label.h"
@@ -44,17 +44,17 @@
 #define OPCODEALLOCSIZE 100	/* reallocate size for opcodes in functions */
 
 
-static long maxopcodes;		/* number of opcodes available */
-static long newindex;		/* index of new function */
-static char *newname;		/* name of new function */
-static long oldop;		/* previous opcode */
-static long oldoldop;		/* opcode before previous opcode */
-static long debugline;		/* line number of latest debug opcode */
-static long funccount;		/* number of functions */
-static long funcavail;		/* available number of functions */
-static FUNC *functemplate;	/* function definition template */
-static FUNC **functions;	/* table of functions */
-static STRINGHEAD funcnames;	/* function names */
+STATIC unsigned long maxopcodes;/* number of opcodes available */
+STATIC long newindex;		/* index of new function */
+STATIC char *newname;		/* name of new function */
+STATIC long oldop;		/* previous opcode */
+STATIC long oldoldop;		/* opcode before previous opcode */
+STATIC long debugline;		/* line number of latest debug opcode */
+STATIC long funccount;		/* number of functions */
+STATIC long funcavail;		/* available number of functions */
+STATIC FUNC *functemplate;	/* function definition template */
+STATIC FUNC **functions;	/* table of functions */
+STATIC STRINGHEAD funcnames;	/* function names */
 
 
 /*
@@ -184,8 +184,8 @@ void
 endfunc(void)
 {
 	register FUNC *fp;		/* function just finished */
-	unsigned long size;		/* size of just created function */
-	long index;
+	size_t size;			/* size of just created function */
+	unsigned long index;
 
 	if (oldop != OP_RETURN) {
 		addop(OP_UNDEF);
@@ -195,8 +195,8 @@ endfunc(void)
 	checklabels();
 
 	if (errorcount) {
-		printf("\"%s\": %ld error%s\n", newname, errorcount,
-			((errorcount == 1) ? "" : "s"));
+		scanerror(T_NULL,"Compilation of \"%s\" failed: %ld error(s)",
+			 newname, errorcount);
 		return;
 	}
 	size = funcsize(curfunc->f_opcodecount);
@@ -211,7 +211,7 @@ endfunc(void)
 	if (newname[0] != '*' && (conf->traceflags & TRACE_FNCODES)) {
 		dumpnames = TRUE;
 		for (size = 0; size < fp->f_opcodecount; ) {
-			printf("%ld: ", (long)size);
+			printf("%ld: ", (unsigned long)size);
 			size += dumpop(&fp->f_opcodes[size]);
 		}
 	}
@@ -280,12 +280,13 @@ rmuserfunc(char *name)
 
 	index = findstr(&funcnames, name);
 	if (index < 0) {
-		fprintf(stderr, "%s() has never been defined\n",
-			name);
+		warning("No function named \"%s\" to be undefined", name);
 		return;
 	}
-	if (functions[index] == NULL)
+	if (functions[index] == NULL) {
+		warning("No defined function \"%s\" to be undefined", name);
 		return;
+	}
 	freenumbers(functions[index]);
 	free(functions[index]);
 	if ((inputisterminal() && conf->resource_debug & RSCDBG_STDIN_FUNC) ||
@@ -302,7 +303,7 @@ void
 freefunc(FUNC *fp)
 {
 	long index;
-	long i;
+	unsigned long i;
 
 	if (fp == NULL)
 		return;
@@ -383,7 +384,7 @@ clearopt(void)
 FUNC *
 findfunc(long index)
 {
-	if ((unsigned long) index >= funccount) {
+	if (index >= funccount) {
 		math_error("Undefined function");
 		/*NOTREACHED*/
 	}
@@ -451,124 +452,122 @@ addop(long op)
 	 * slightly optimize the code depending on the various combinations.
 	 */
 	switch (op) {
-		case OP_GETVALUE:
-			switch (oldop) {
-				case OP_NUMBER:
-				case OP_ZERO:
-				case OP_ONE:
-				case OP_IMAGINARY:
-				case OP_GETEPSILON:
-				case OP_SETEPSILON:
-				case OP_STRING:
-				case OP_UNDEF:
-				case OP_GETCONFIG:
-				case OP_SETCONFIG:
-					return;
-				case OP_DUPLICATE:
-					diff = 1;
-					oldop = OP_DUPVALUE;
-					break;
-				case OP_FIADDR:
-					diff = 1;
-					oldop = OP_FIVALUE;
-					break;
-				case OP_GLOBALADDR:
-					diff = 1 + PTR_SIZE;
-					oldop = OP_GLOBALVALUE;
-					break;
-				case OP_LOCALADDR:
-					oldop = OP_LOCALVALUE;
-					break;
-				case OP_PARAMADDR:
-					oldop = OP_PARAMVALUE;
-					break;
-				case OP_ELEMADDR:
-					oldop = OP_ELEMVALUE;
-					break;
-				default:
-					cut = FALSE;
+	case OP_GETVALUE:
+		switch (oldop) {
+		case OP_NUMBER:
+		case OP_ZERO:
+		case OP_ONE:
+		case OP_IMAGINARY:
+		case OP_GETEPSILON:
+		case OP_SETEPSILON:
+		case OP_STRING:
+		case OP_UNDEF:
+		case OP_GETCONFIG:
+		case OP_SETCONFIG:
+			return;
+		case OP_DUPLICATE:
+			diff = 1;
+			oldop = OP_DUPVALUE;
+			break;
+		case OP_FIADDR:
+			diff = 1;
+			oldop = OP_FIVALUE;
+			break;
+		case OP_GLOBALADDR:
+			diff = 1 + PTR_SIZE;
+			oldop = OP_GLOBALVALUE;
+			break;
+		case OP_LOCALADDR:
+			oldop = OP_LOCALVALUE;
+			break;
+		case OP_PARAMADDR:
+			oldop = OP_PARAMVALUE;
+			break;
+		case OP_ELEMADDR:
+			oldop = OP_ELEMVALUE;
+			break;
+		default:
+			cut = FALSE;
 
-			}
-			if (cut) {
-				fp->f_opcodes[count - diff] = oldop;
-				return;
-			}
+		}
+		if (cut) {
+			fp->f_opcodes[count - diff] = oldop;
+			return;
+		}
+		break;
+	case OP_POP:
+		switch (oldop) {
+		case OP_ASSIGN:
+			fp->f_opcodes[count-1] = OP_ASSIGNPOP;
+			oldop = OP_ASSIGNPOP;
+			return;
+		case OP_NUMBER:
+		case OP_IMAGINARY:
+			q = constvalue(fp->f_opcodes[count-1]);
+			qfree(q);
 			break;
-		case OP_POP:
-			switch (oldop) {
-			case OP_ASSIGN:
-				fp->f_opcodes[count-1] = OP_ASSIGNPOP;
-				oldop = OP_ASSIGNPOP;
-				return;
-			case OP_NUMBER:
-			case OP_IMAGINARY:
-				q = constvalue(fp->f_opcodes[count-1]);
-				qfree(q);
-				break;
-			case OP_STRING:
-				sfree(findstring((long)fp->f_opcodes[count-1]));
-				break;
-			case OP_LOCALADDR:
-			case OP_PARAMADDR:
-				break;
-			case OP_GLOBALADDR:
-				diff = 1 + PTR_SIZE;
-				break;
-			case OP_UNDEF:
-				fp->f_opcodecount -= 1;
-				oldop = OP_NOP;
-				oldoldop = OP_NOP;
-				return;
-			default:
-				cut = FALSE;
-			}
-			if (cut) {
-				fp->f_opcodecount -= diff;
-				oldop = OP_NOP;
-				oldoldop = OP_NOP;
-				fprintf(stderr,
-					"Line %ld: unused value ignored\n",
-					linenumber());
-				return;
-			}
+		case OP_STRING:
+			sfree(findstring((long)fp->f_opcodes[count-1]));
 			break;
-		case OP_NEGATE:
-			if (oldop == OP_NUMBER) {
-				q = constvalue(fp->f_opcodes[count-1]);
-				fp->f_opcodes[count-1] = addqconstant(qneg(q));
-				qfree(q);
-				return;
-			}
+		case OP_LOCALADDR:
+		case OP_PARAMADDR:
+			break;
+		case OP_GLOBALADDR:
+			diff = 1 + PTR_SIZE;
+			break;
+		case OP_UNDEF:
+			fp->f_opcodecount -= 1;
+			oldop = OP_NOP;
+			oldoldop = OP_NOP;
+			return;
+		default:
+			cut = FALSE;
+		}
+		if (cut) {
+			fp->f_opcodecount -= diff;
+			oldop = OP_NOP;
+			oldoldop = OP_NOP;
+			warning("Constant before comma operator");
+			return;
+		}
+		break;
+	case OP_NEGATE:
+		if (oldop == OP_NUMBER) {
+			q = constvalue(fp->f_opcodes[count-1]);
+			fp->f_opcodes[count-1] = addqconstant(qneg(q));
+			qfree(q);
+			return;
+		}
 	}
 	if (oldop == OP_NUMBER) {
 		if (oldoldop == OP_NUMBER) {
 			q1 = constvalue(fp->f_opcodes[count - 3]);
 			q2 = constvalue(fp->f_opcodes[count - 1]);
 			switch (op) {
-				case OP_DIV:
-					if (qiszero(q2)) {
-						cut = FALSE;
-						break;
-					}
-					q = qqdiv(q1,q2);
-					break;
-				case OP_MUL:
-					q = qmul(q1,q2);
-					break;
-				case OP_ADD:
-					q = qqadd(q1,q2);
-					break;
-				case OP_SUB:
-					q = qsub(q1,q2);
-					break;
-				case OP_POWER:
-					if (qisfrac(q2) || qisneg(q2))
-						cut = FALSE;
-					else
-						q = qpowi(q1,q2);
-					break;
-				default:
+			case OP_DIV:
+				if (qiszero(q2)) {
 					cut = FALSE;
+					break;
+				}
+				q = qqdiv(q1,q2);
+				break;
+			case OP_MUL:
+				q = qmul(q1,q2);
+				break;
+			case OP_ADD:
+				q = qqadd(q1,q2);
+				break;
+			case OP_SUB:
+				q = qsub(q1,q2);
+				break;
+			case OP_POWER:
+				if (qisfrac(q2) || qisneg(q2))
+					cut = FALSE;
+				else
+					q = qpowi(q1,q2);
+				break;
+			default:
+				cut = FALSE;
 			}
 			if (cut) {
 				qfree(q1);

align32.c

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: align32.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: align32.c,v 30.1 2007/03/16 11:09:46 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/align32.c,v $
  *
  * Under source code control:	1995/11/23 05:18:06

alloc.h

@@ -1,7 +1,7 @@
 /*
  * alloc - storage allocation and storage debug macros
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 1999-2007  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: alloc.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: alloc.h,v 30.2 2008/04/15 21:17:57 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/alloc.h,v $
  *
  * Under source code control:	1990/02/15 01:48:29
@@ -32,48 +32,42 @@
 #define __ALLOC_H__
 
 
-#include "have_malloc.h"
-#include "have_newstr.h"
-#include "have_string.h"
-#include "have_memmv.h"
-
-#ifdef HAVE_MALLOC_H
-# include <malloc.h>
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "have_newstr.h"
+# include "have_string.h"
+# include "have_memmv.h"
 #else
-#if defined(FORCE_STDC) || (defined(__STDC__) && __STDC__ != 0) || defined(__cplusplus)
-   extern void *malloc();
-   extern void *realloc();
-   extern void free();
-# else
-   extern char *malloc();
-   extern char *realloc();
-   extern void free();
-# endif
+# include <calc/have_newstr.h>
+# include <calc/have_string.h>
+# include <calc/have_memmv.h>
 #endif
 
 #ifdef HAVE_STRING_H
 # include <string.h>
 
 #else
+#if defined(_WIN32) && defined(NOTCYGWIN)
+#include <stdio.h>
+#endif
 
 # if defined(HAVE_NEWSTR)
-extern void *memcpy();
-extern void *memset();
+E_FUNC void *memcpy();
+E_FUNC void *memset();
 #if defined(FORCE_STDC) || (defined(__STDC__) && __STDC__ != 0) || defined(__cplusplus)
-extern size_t strlen();
+E_FUNC size_t strlen();
 #  else
-extern long strlen();
+E_FUNC long strlen();
 #  endif
 # else /* HAVE_NEWSTR */
-extern void bcopy();
-extern void bfill();
-extern char *index();
+E_FUNC void bcopy();
+E_FUNC void bfill();
+E_FUNC char *index();
 # endif /* HAVE_NEWSTR */
-extern char *strchr();
-extern char *strcpy();
-extern char *strncpy();
-extern char *strcat();
-extern int strcmp();
+E_FUNC char *strchr();
+E_FUNC char *strcpy();
+E_FUNC char *strncpy();
+E_FUNC char *strcat();
+E_FUNC int strcmp();
 
 #endif
 
@@ -87,13 +81,13 @@ extern int strcmp();
 #endif /* HAVE_NEWSTR */
 
 #if !defined(HAVE_MEMMOVE)
-# undef CALC_SIZE_T
+# undef MEMMOVE_SIZE_T
 #if defined(FORCE_STDC) || (defined(__STDC__) && __STDC__ != 0) || defined(__cplusplus)
-#  define CALC_SIZE_T size_t
+#  define MEMMOVE_SIZE_T size_t
 # else
-#  define CALC_SIZE_T long
+#  define MEMMOVE_SIZE_T long
 # endif
-extern void *memmove(void *s1, const void *s2, CALC_SIZE_T n);
+E_FUNC void *memmove(void *s1, CONST void *s2, MEMMOVE_SIZE_T n);
 #endif
 
 #endif /* !__ALLOC_H__ */

assocfunc.c

@@ -1,7 +1,7 @@
 /*
  * assocfunc - association table routines
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 1999-2007  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: assocfunc.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: assocfunc.c,v 30.1 2007/03/16 11:09:46 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/assocfunc.c,v $
  *
  * Under source code control:	1993/07/20 23:04:27
@@ -46,10 +46,10 @@
 #define ELEMSIZE(n)	(sizeof(ASSOCELEM) + (sizeof(VALUE) * ((n) - 1)))
 
 
-static ASSOCELEM *elemindex(ASSOC *ap, long index);
-static BOOL compareindices(VALUE *v1, VALUE *v2, long dim);
-static void resize(ASSOC *ap, long newsize);
-static void assoc_elemfree(ASSOCELEM *ep);
+S_FUNC ASSOCELEM *elemindex(ASSOC *ap, long index);
+S_FUNC BOOL compareindices(VALUE *v1, VALUE *v2, long dim);
+S_FUNC void resize(ASSOC *ap, long newsize);
+S_FUNC void assoc_elemfree(ASSOCELEM *ep);
 
 
 /*
@@ -69,7 +69,7 @@ associndex(ASSOC *ap, BOOL create, long dim, VALUE *indices)
 {
 	ASSOCELEM **listhead;
 	ASSOCELEM *ep;
-	static VALUE val;
+	STATIC VALUE val;
 	QCKHASH hash;
 	int i;
 
@@ -200,7 +200,7 @@ assocrsearch(ASSOC *ap, VALUE *vp, long i, long j, ZVALUE *index)
  *	ap		association to index into
  *	index		index of desired element
  */
-static ASSOCELEM *
+S_FUNC ASSOCELEM *
 elemindex(ASSOC *ap, long index)
 {
 	ASSOCELEM *ep;
@@ -356,7 +356,7 @@ assoccopy(ASSOC *oldap)
  * This is only actually done if the growth from the previous size is
  * enough to make this worthwhile.
  */
-static void
+S_FUNC void
 resize(ASSOC *ap, long newsize)
 {
 	ASSOCELEM **oldtable;
@@ -400,7 +400,7 @@ resize(ASSOC *ap, long newsize)
 /*
  * Free an association element, along with any contained values.
  */
-static void
+S_FUNC void
 assoc_elemfree(ASSOCELEM *ep)
 {
 	int i;
@@ -520,7 +520,7 @@ assocprint(ASSOC *ap, long max_print)
  * Compare two lists of index values to see if they are identical.
  * Returns TRUE if they are the same.
  */
-static BOOL
+S_FUNC BOOL
 compareindices(VALUE *v1, VALUE *v2, long dim)
 {
 	int i;

blkcpy.c

@@ -1,7 +1,7 @@
 /*
  * blkcpy - general values and related routines used by the calculator
  *
- * Copyright (C) 1999  Landon Curt Noll and Ernest Bowen
+ * Copyright (C) 1999-2007  Landon Curt Noll and Ernest Bowen
  *
  * Primary author:  Landon Curt Noll
  *
@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: blkcpy.c,v 29.3 2001/04/10 22:06:46 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: blkcpy.c,v 30.1 2007/03/16 11:09:46 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/blkcpy.c,v $
  *
  * Under source code control:	1997/04/18 20:41:26
@@ -36,7 +36,7 @@
 #include "value.h"
 #include "file.h"
 #include "blkcpy.h"
-#include "string.h"
+#include "str.h"
 
 
 /*
@@ -73,51 +73,51 @@ copystod(VALUE *svp, long ssi, long num, VALUE *dvp, long dsi)
 	 * determine/check source type
 	 */
 	switch(svp->v_type) {
-		case V_NBLOCK:
-			if (svp->v_nblock->subtype & V_NOCOPYFROM)
-				return E_COPY15;
-			sblk = svp->v_nblock->blk;
-			if (sblk->data == NULL)
-				return E_COPY8;
-			break;
-		case V_BLOCK:
-			sblk = svp->v_block;
-			break;
-		case V_STR:
-		case V_OCTET:
-		case V_NUM:
-		case V_FILE:
-		case V_MAT:
-		case V_LIST:
-			break;
-		default:
-			return E_COPY9;
+	case V_NBLOCK:
+		if (svp->v_nblock->subtype & V_NOCOPYFROM)
+			return E_COPY15;
+		sblk = svp->v_nblock->blk;
+		if (sblk->data == NULL)
+			return E_COPY8;
+		break;
+	case V_BLOCK:
+		sblk = svp->v_block;
+		break;
+	case V_STR:
+	case V_OCTET:
+	case V_NUM:
+	case V_FILE:
+	case V_MAT:
+	case V_LIST:
+		break;
+	default:
+		return E_COPY9;
 	}
 
 	/*
 	 * determine/check destination type
 	 */
 	switch(dvp->v_type) {
-		case V_NBLOCK:
-			if (dvp->v_nblock->subtype & V_NOCOPYTO)
-				return E_COPY16;
-			noreloc |=((dvp->v_nblock->subtype & V_NOREALLOC) != 0);
-			dblk = dvp->v_nblock->blk;
-			if (dblk->data == NULL)
-				return E_COPY10;
-			break;
-		case V_BLOCK:
-			noreloc = ((dvp->v_subtype & V_NOREALLOC) != 0);
-			dblk = dvp->v_block;
-			break;
-		case V_STR:
-		case V_NUM:
-		case V_FILE:
-		case V_MAT:
-		case V_LIST:
-			break;
-		default:
-			return E_COPY11;
+	case V_NBLOCK:
+		if (dvp->v_nblock->subtype & V_NOCOPYTO)
+			return E_COPY16;
+		noreloc |=((dvp->v_nblock->subtype & V_NOREALLOC) != 0);
+		dblk = dvp->v_nblock->blk;
+		if (dblk->data == NULL)
+			return E_COPY10;
+		break;
+	case V_BLOCK:
+		noreloc = ((dvp->v_subtype & V_NOREALLOC) != 0);
+		dblk = dvp->v_block;
+		break;
+	case V_STR:
+	case V_NUM:
+	case V_FILE:
+	case V_MAT:
+	case V_LIST:
+		break;
+	default:
+		return E_COPY11;
 	}
 
 	/*
@@ -280,20 +280,20 @@ copymat2mat(MATRIX *smat, long ssi, long num, MATRIX *dmat, long dsi)
 	VALUE *vp;
 	VALUE *vq;
 	VALUE *vtemp;
-	short subtype;
+	unsigned short subtype;
 
 	if (ssi > smat->m_size)
 		return E_COPY2;
 
 	if (num < 0)
 		num = smat->m_size - ssi;
-	if ((USB32) ssi + num > smat->m_size)
+	if (ssi + num > smat->m_size)
 		return E_COPY5;
 	if (num == 0)
 		return 0;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > dmat->m_size)
+	if (dsi + num > dmat->m_size)
 		return E_COPY7;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
 	if (vtemp == NULL) {
@@ -311,7 +311,7 @@ copymat2mat(MATRIX *smat, long ssi, long num, MATRIX *dmat, long dsi)
 		subtype = vq->v_subtype;
 		freevalue(vq);
 		*vq = *vp;
-		vq->v_subtype = subtype;
+		vq->v_subtype |= subtype;
 	}
 	free(vtemp);
 	return 0;
@@ -329,19 +329,19 @@ copyblk2mat(BLOCK *blk, long ssi, long num, MATRIX *dmat, long dsi)
 	VALUE *vq;
 	VALUE *vtemp;
 	long i;
-	short subtype;
+	unsigned short subtype;
 
 	if (ssi > blk->datalen)
 		return E_COPY2;
 	if (num < 0)
 		num = blk->datalen - ssi;
-	if ((USB32) ssi + num > blk->datalen)
+	if (ssi + num > blk->datalen)
 		return E_COPY5;
 	if (num == 0)
 		return 0;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > dmat->m_size)
+	if (dsi + num > dmat->m_size)
 		return E_COPY7;
 	op = blk->data + ssi;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
@@ -363,7 +363,7 @@ copyblk2mat(BLOCK *blk, long ssi, long num, MATRIX *dmat, long dsi)
 		subtype = vq->v_subtype;
 		freevalue(vq);
 		*vq = *vp;
-		vq->v_subtype = subtype;
+		vq->v_subtype |= subtype;
 	}
 	free(vtemp);
 	return 0;
@@ -389,7 +389,7 @@ copymat2blk(MATRIX *smat, long ssi, long num, BLOCK *dblk, long dsi, BOOL norelo
 		num = smat->m_size - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > smat->m_size)
+	if (ssi + num > smat->m_size)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = dblk->datalen;
@@ -429,6 +429,7 @@ copymat2list(MATRIX *smat, long ssi, long num, LIST *lp, long dsi)
 	LISTELEM *ep;
 	VALUE *vtemp;
 	long i;
+	unsigned short subtype;
 
 	if (ssi > smat->m_size)
 		return E_COPY2;
@@ -436,11 +437,11 @@ copymat2list(MATRIX *smat, long ssi, long num, LIST *lp, long dsi)
 		num = smat->m_size - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > smat->m_size)
+	if (ssi + num > smat->m_size)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > lp->l_count)
+	if (dsi + num > lp->l_count)
 		return E_COPY7;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
 	if (vtemp == NULL) {
@@ -456,8 +457,10 @@ copymat2list(MATRIX *smat, long ssi, long num, LIST *lp, long dsi)
 	ep = listelement(lp, (long) dsi);
 	i = num;
 	while (i-- > 0) {
+		subtype = ep->e_value.v_subtype;
 		freevalue(&ep->e_value);
 		ep->e_value = *vq++;
+		ep->e_value.v_subtype |= subtype;
 		ep = ep->e_next;
 	}
 	free(vtemp);
@@ -476,7 +479,7 @@ copylist2mat(LIST *lp, long ssi, long num, MATRIX *dmat, long dsi)
 	LISTELEM *ep;
 	VALUE *vtemp;
 	long i;
-	short subtype;
+	unsigned short subtype;
 
 	if (ssi > lp->l_count)
 		return E_COPY2;
@@ -484,11 +487,11 @@ copylist2mat(LIST *lp, long ssi, long num, MATRIX *dmat, long dsi)
 		num = lp->l_count - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > lp->l_count)
+	if (ssi + num > lp->l_count)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > dmat->m_size)
+	if (dsi + num > dmat->m_size)
 		return E_COPY7;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
 	if (vtemp == NULL) {
@@ -508,7 +511,7 @@ copylist2mat(LIST *lp, long ssi, long num, MATRIX *dmat, long dsi)
 		subtype = vq->v_subtype;
 		freevalue(vq);
 		*vq = *vp;
-		vq->v_subtype = subtype;
+		vq->v_subtype |= subtype;
 	}
 	free(vtemp);
 	return 0;
@@ -526,6 +529,7 @@ copylist2list(LIST *slp, long ssi, long num, LIST *dlp, long dsi)
 	LISTELEM *dep;
 	VALUE *vtemp;
 	VALUE *vp;
+	unsigned short subtype;
 
 	if (ssi > slp->l_count)
 		return E_COPY2;
@@ -533,11 +537,11 @@ copylist2list(LIST *slp, long ssi, long num, LIST *dlp, long dsi)
 		num = slp->l_count - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > slp->l_count)
+	if (ssi + num > slp->l_count)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > dlp->l_count)
+	if (dsi + num > dlp->l_count)
 		return E_COPY7;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
 	if (vtemp == NULL) {
@@ -555,8 +559,10 @@ copylist2list(LIST *slp, long ssi, long num, LIST *dlp, long dsi)
 	vp = vtemp;
 	i = num;
 	while (i-- > 0) {
+		subtype = dep->e_value.v_subtype;
 		freevalue(&dep->e_value);
 		dep->e_value = *vp++;
+		dep->e_value.v_subtype |= subtype;
 		dep = dep->e_next;
 	}
 	free(vtemp);
@@ -572,7 +578,7 @@ copyblk2file(BLOCK *sblk, long ssi, long num, FILEID id, long dsi)
 {
 	FILEIO	*fiop;
 	FILE	*fp;
-	unsigned int	numw;
+	long	numw;
 
 	if (ssi > sblk->datalen)
 		return E_COPY2;
@@ -609,7 +615,7 @@ copyfile2blk(FILEID id, long ssi, long num, BLOCK *dblk, long dsi, BOOL noreloc)
 {
 	FILEIO	*fiop;
 	FILE	*fp;
-	unsigned int	numw;
+	long	numw;
 	ZVALUE	fsize;
 	long	filelen;
 	long	newlen;
@@ -639,7 +645,7 @@ copyfile2blk(FILEID id, long ssi, long num, BLOCK *dblk, long dsi, BOOL noreloc)
 		num = filelen - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > filelen)
+	if (ssi + num > filelen)
 		return E_COPY5;
 	if (fseek(fp, ssi, 0))		/* using system fseek  XXX */
 		return E_COPYF2;
@@ -677,7 +683,7 @@ copystr2file(STRING *str, long ssi, long num, FILEID id, long dsi)
 {
 	long len;
 	FILEIO *fiop;
-	unsigned int numw;
+	long numw;
 	FILE *fp;
 
 	len = str->s_len;
@@ -688,7 +694,7 @@ copystr2file(STRING *str, long ssi, long num, FILEID id, long dsi)
 		num = len - ssi;
 	if (num <= 0)			/* Nothing to be copied */
 		return 0;
-	if ((USB32) ssi + num > len)
+	if (ssi + num > len)
 		return E_COPY5;		/* Insufficient memory in str */
 	fiop = findid(id, TRUE);
 	if (fiop == NULL)
@@ -726,7 +732,7 @@ copyblk2blk(BLOCK *sblk, long ssi, long num, BLOCK *dblk, long dsi, BOOL noreloc
 		num = sblk->datalen - ssi;
 	if (num == 0)			/* Nothing to be copied */
 		return 0;
-	if ((unsigned int) ssi + num > sblk->datalen)
+	if (ssi + num > sblk->datalen)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = dblk->datalen;
@@ -806,13 +812,13 @@ copystr2str(STRING *sstr, long ssi, long num, STRING *dstr, long dsi)
 {
 	char *c, *c1;
 
-	if (num < 0 || ssi + num > sstr->s_len)
+	if (num < 0 || (size_t)(ssi + num) > sstr->s_len)
 		num = sstr->s_len - ssi;
 	if (num <= 0)
 		return 0;		/* Nothing to be copied */
 	if (dsi < 0)			/* default destination index */
 		dsi = 0;
-	if (dsi + num > dstr->s_len)
+	if ((size_t)(dsi + num) > dstr->s_len)
 		num = dstr->s_len - dsi;
 	c1 = sstr->s_str + ssi;
 	c = dstr->s_str + dsi;
@@ -838,7 +844,7 @@ copyblk2str(BLOCK *sblk, long ssi, long num, STRING *dstr, long dsi)
 		return 0;		/* Nothing to be copied */
 	if (dsi < 0)			/* default destination index */
 		dsi = 0;
-	if (dsi + num > dstr->s_len)
+	if ((size_t)(dsi + num) > dstr->s_len)
 		num = dstr->s_len - dsi;
 	c1 = sblk->data + ssi;
 	c = (USB8 *)dstr->s_str + dsi;
@@ -852,18 +858,18 @@ copyblk2str(BLOCK *sblk, long ssi, long num, STRING *dstr, long dsi)
 int
 copyostr2str(char *sstr, long ssi, long num, STRING *dstr, long dsi)
 {
-	long len;
+	size_t len;
 	char	*c, *c1;
 
-	len = (long)strlen(sstr);
+	len = strlen(sstr);
 
-	if (num < 0 || ssi + num > len)
+	if (num < 0 || (size_t)(ssi + num) > len)
 		num = len - ssi;
 	if (num <= 0)			/* Nothing to be copied */
 		return 0;
 	if (dsi < 0)
 		dsi = 0;		/* Default destination index */
-	if (dsi + num > dstr->s_len)
+	if ((size_t)(dsi + num) > dstr->s_len)
 		num = dstr->s_len - dsi;
 	c1 = sstr + ssi;
 	c = dstr->s_str + dsi;
@@ -879,16 +885,16 @@ copyostr2str(char *sstr, long ssi, long num, STRING *dstr, long dsi)
 int
 copyostr2blk(char *str,long ssi,long num,BLOCK *dblk,long dsi,BOOL noreloc)
 {
-	int	len;
-	int	newlen;
-	int	newsize;
+	size_t	len;
+	size_t	newlen;
+	size_t	newsize;
 	USB8	*newdata;
 
 	len = strlen(str) + 1;
 
-	if (ssi > len)
+	if (ssi > 0 && (size_t)ssi > len)
 		return E_COPY2;
-	if (num < 0 || (unsigned long) ssi + num > len)
+	if (num < 0 || (size_t)(ssi + num) > len)
 		num = len - ssi;
 	if (num <= 0)			/* Nothing to be copied */
 		return 0;
@@ -897,7 +903,7 @@ copyostr2blk(char *str,long ssi,long num,BLOCK *dblk,long dsi,BOOL noreloc)
 	newlen = dsi + num;
 	if (newlen <= 0)
 		return E_COPY7;
-	if (newlen >= dblk->maxsize) {
+	if (newlen >= (size_t)dblk->maxsize) {
 		if (noreloc)
 			return E_COPY17;
 		newsize = (1 + newlen/dblk->blkchunk) * dblk->blkchunk;
@@ -910,7 +916,7 @@ copyostr2blk(char *str,long ssi,long num,BLOCK *dblk,long dsi,BOOL noreloc)
 		dblk->maxsize = newsize;
 	}
 	memmove(dblk->data + dsi, str + ssi, num);
-	if (newlen > dblk->datalen)
+	if (newlen > (size_t)dblk->datalen)
 		dblk->datalen = newlen;
 	return 0;
 }
@@ -929,7 +935,7 @@ copyostr2blk(char *str,long ssi,long num,BLOCK *dblk,long dsi,BOOL noreloc)
  *	s1
  */
 void *
-memmove(void *s1, const void *s2, CALC_SIZE_T n)
+memmove(void *s1, CONST void *s2, MEMMOVE_SIZE_T n)
 {
 	/*
 	 * firewall
@@ -978,8 +984,8 @@ memmove(void *s1, const void *s2, CALC_SIZE_T n)
 int
 copynum2blk(NUMBER *snum, long ssi, long num, BLOCK *dblk, long dsi, BOOL noreloc)
 {
-	long	newlen;
-	long	newsize;
+	size_t	newlen;
+	size_t	newsize;
 	USB8	*newdata;
 #if CALC_BYTE_ORDER == BIG_ENDIAN
 	ZVALUE	*swnum; /* byte swapped numerator */
@@ -991,14 +997,14 @@ copynum2blk(NUMBER *snum, long ssi, long num, BLOCK *dblk, long dsi, BOOL norelo
 		num = snum->num.len - ssi;
 	if (num == 0)			/* Nothing to be copied */
 		return 0;
-	if ((unsigned long) ssi + num > snum->num.len)
+	if (ssi + num > snum->num.len)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = dblk->datalen;
-	newlen = dsi + (long)(num*sizeof(HALF));
+	newlen = dsi + (num*sizeof(HALF));
 	if (newlen <= 0)
 		return E_COPY7;
-	if (newlen >= dblk->maxsize) {
+	if (newlen >= (size_t)dblk->maxsize) {
 		if (noreloc)
 			return E_COPY17;
 		newsize = (1 + newlen/dblk->blkchunk) * dblk->blkchunk;
@@ -1017,7 +1023,7 @@ copynum2blk(NUMBER *snum, long ssi, long num, BLOCK *dblk, long dsi, BOOL norelo
 	memmove(dblk->data+dsi, (char *)(swnum->v+ssi), num*sizeof(HALF));
 	zfree(*swnum);
 #endif
-	if (newlen > dblk->datalen)
+	if (newlen > (size_t)dblk->datalen)
 		dblk->datalen = newlen;
 	return 0;
 }
@@ -1029,7 +1035,7 @@ copynum2blk(NUMBER *snum, long ssi, long num, BLOCK *dblk, long dsi, BOOL norelo
 int
 copyblk2num(BLOCK *sblk, long ssi, long num, NUMBER *dnum, long dsi, NUMBER **res)
 {
-	long	newlen;
+	size_t	newlen;
 	NUMBER *ret;		/* cloned and modified numerator */
 #if CALC_BYTE_ORDER == BIG_ENDIAN
 	HALF *swapped;		/* byte swapped input data */
@@ -1044,11 +1050,11 @@ copyblk2num(BLOCK *sblk, long ssi, long num, NUMBER *dnum, long dsi, NUMBER **re
 		num = sblk->datalen - ssi;
 	if (num == 0)			/* Nothing to be copied */
 		return 0;
-	if ((unsigned long) ssi + num > sblk->datalen)
+	if (ssi + num > sblk->datalen)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = dnum->num.len;
-	newlen = dsi + (long)((num+sizeof(HALF)-1)/sizeof(HALF));
+	newlen = dsi + ((num+sizeof(HALF)-1)/sizeof(HALF));
 	if (newlen <= 0)
 		return E_COPY7;
 

blkcpy.h

@@ -1,7 +1,7 @@
 /*
  * blkcpy - general values and related routines used by the calculator
  *
- * Copyright (C) 1999  Landon Curt Noll and Ernest Bowen
+ * Copyright (C) 1999-2007  Landon Curt Noll and Ernest Bowen
  *
  * Primary author:  Landon Curt Noll
  *
@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: blkcpy.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: blkcpy.h,v 30.1 2007/03/16 11:09:46 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/blkcpy.h,v $
  *
  * Under source code control:	1997/04/18 20:41:25
@@ -36,27 +36,27 @@
 /*
  * the main copy gateway function
  */
-extern int copystod(VALUE *, long, long, VALUE *, long);
+E_FUNC int copystod(VALUE *, long, long, VALUE *, long);
 
 /*
  * specific copy functions
  */
-extern int copyblk2blk(BLOCK *, long, long, BLOCK *, long, BOOL);
-extern int copyblk2file(BLOCK *, long, long, FILEID, long);
-extern int copyblk2mat(BLOCK *, long, long, MATRIX *, long);
-extern int copyblk2num(BLOCK *, long, long, NUMBER *, long, NUMBER **);
-extern int copyblk2str(BLOCK *, long, long, STRING *, long);
-extern int copyfile2blk(FILEID, long, long, BLOCK *, long, BOOL);
-extern int copylist2list(LIST *, long, long, LIST *, long);
-extern int copylist2mat(LIST *, long, long, MATRIX *, long);
-extern int copymat2blk(MATRIX *, long, long, BLOCK *, long, BOOL);
-extern int copymat2list(MATRIX *, long, long, LIST *, long);
-extern int copymat2mat(MATRIX *, long, long, MATRIX *, long);
-extern int copynum2blk(NUMBER *, long, long, BLOCK *, long, BOOL);
-extern int copyostr2blk(char *, long, long, BLOCK *, long, BOOL);
-extern int copyostr2str(char *, long, long, STRING *, long);
-extern int copystr2blk(STRING *, long, long, BLOCK *, long, BOOL);
-extern int copystr2file(STRING *, long, long, FILEID, long);
-extern int copystr2str(STRING *, long, long, STRING *, long);
+E_FUNC int copyblk2blk(BLOCK *, long, long, BLOCK *, long, BOOL);
+E_FUNC int copyblk2file(BLOCK *, long, long, FILEID, long);
+E_FUNC int copyblk2mat(BLOCK *, long, long, MATRIX *, long);
+E_FUNC int copyblk2num(BLOCK *, long, long, NUMBER *, long, NUMBER **);
+E_FUNC int copyblk2str(BLOCK *, long, long, STRING *, long);
+E_FUNC int copyfile2blk(FILEID, long, long, BLOCK *, long, BOOL);
+E_FUNC int copylist2list(LIST *, long, long, LIST *, long);
+E_FUNC int copylist2mat(LIST *, long, long, MATRIX *, long);
+E_FUNC int copymat2blk(MATRIX *, long, long, BLOCK *, long, BOOL);
+E_FUNC int copymat2list(MATRIX *, long, long, LIST *, long);
+E_FUNC int copymat2mat(MATRIX *, long, long, MATRIX *, long);
+E_FUNC int copynum2blk(NUMBER *, long, long, BLOCK *, long, BOOL);
+E_FUNC int copyostr2blk(char *, long, long, BLOCK *, long, BOOL);
+E_FUNC int copyostr2str(char *, long, long, STRING *, long);
+E_FUNC int copystr2blk(STRING *, long, long, BLOCK *, long, BOOL);
+E_FUNC int copystr2file(STRING *, long, long, FILEID, long);
+E_FUNC int copystr2str(STRING *, long, long, STRING *, long);
 
 #endif /* !__BLKCPY_H__ */

block.c

@@ -1,7 +1,7 @@
 /*
  * block - fixed, dynamic, fifo and circular memory blocks
  *
- * Copyright (C) 1999  Landon Curt Noll and Ernest Bowen
+ * Copyright (C) 1999-2007  Landon Curt Noll and Ernest Bowen
  *
  * Primary author:  Landon Curt Noll
  *
@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: block.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: block.c,v 30.1 2007/03/16 11:09:46 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/block.c,v $
  *
  * Under source code control:	1997/02/27 00:29:40
@@ -37,19 +37,19 @@
 #include "config.h"
 #include "block.h"
 #include "nametype.h"
-#include "string.h"
+#include "str.h"
 #include "calcerr.h"
 
 #define NBLOCKCHUNK 16
 
-static long nblockcount = 0;
-static long maxnblockcount = 0;
-static STRINGHEAD nblocknames;
-static NBLOCK **nblocks;
+STATIC long nblockcount = 0;
+STATIC long maxnblockcount = 0;
+STATIC STRINGHEAD nblocknames;
+STATIC NBLOCK **nblocks;
 
 
 /* forward declarations */
-static void blkchk(BLOCK*);
+S_FUNC void blkchk(BLOCK*);
 
 
 /*
@@ -57,7 +57,7 @@ static void blkchk(BLOCK*);
  *
  * given:
  *	len	- initial memory length of the block
- *	type	- BLK_TYPE_XXX
+ *	type	- BLK_TYPE_XYZ
  *	chunk	- allocation chunk size
  *
  * returns:
@@ -154,7 +154,7 @@ blk_free(BLOCK *blk)
  *	if all is ok, otherwise math_error() is called and this
  *	function does not return
  */
-static void
+S_FUNC void
 blkchk(BLOCK *blk)
 {
 

block.h

@@ -1,7 +1,7 @@
 /*
  * block - fixed, dynamic, fifo and circular memory blocks
  *
- * Copyright (C) 1999  Landon Curt Noll and Ernest Bowen
+ * Copyright (C) 1999-2007  Landon Curt Noll and Ernest Bowen
  *
  * Primary author:  Landon Curt Noll
  *
@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: block.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: block.h,v 30.1 2007/03/16 11:09:46 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/block.h,v $
  *
  * Under source code control:	1997/02/21 05:03:39
@@ -160,7 +160,7 @@ typedef struct nblock NBLOCK;
 /*
  * block debug
  */
-extern int blk_debug;	/* 0 => debug off */
+EXTERN int blk_debug;	/* 0 => debug off */
 
 
 /*
@@ -204,22 +204,22 @@ typedef USB8 OCTET;
 /*
  * external functions
  */
-extern BLOCK *blkalloc(int, int);
-extern void blk_free(BLOCK*);
-extern BLOCK *blkrealloc(BLOCK*, int, int);
-extern void blktrunc(BLOCK*);
-extern BLOCK *blk_copy(BLOCK*);
-extern int blk_cmp(BLOCK*, BLOCK*);
-extern void blk_print(BLOCK*);
-extern void nblock_print(NBLOCK *);
-extern NBLOCK *createnblock(char *, int, int);
-extern NBLOCK *reallocnblock(int, int, int);
-extern int removenblock(int);
-extern int findnblockid(char *);
-extern NBLOCK *findnblock(int);
-extern BLOCK *copyrealloc(BLOCK*, int, int);
-extern int countnblocks(void);
-extern void shownblocks(void);
+E_FUNC BLOCK *blkalloc(int, int);
+E_FUNC void blk_free(BLOCK*);
+E_FUNC BLOCK *blkrealloc(BLOCK*, int, int);
+E_FUNC void blktrunc(BLOCK*);
+E_FUNC BLOCK *blk_copy(BLOCK*);
+E_FUNC int blk_cmp(BLOCK*, BLOCK*);
+E_FUNC void blk_print(BLOCK*);
+E_FUNC void nblock_print(NBLOCK *);
+E_FUNC NBLOCK *createnblock(char *, int, int);
+E_FUNC NBLOCK *reallocnblock(int, int, int);
+E_FUNC int removenblock(int);
+E_FUNC int findnblockid(char *);
+E_FUNC NBLOCK *findnblock(int);
+E_FUNC BLOCK *copyrealloc(BLOCK*, int, int);
+E_FUNC int countnblocks(void);
+E_FUNC void shownblocks(void);
 
 
 #endif /* !__BLOCK_H__ */

byteswap.c

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: byteswap.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: byteswap.c,v 30.1 2007/03/16 11:09:46 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/byteswap.c,v $
  *
  * Under source code control:	1995/10/11 04:44:01

byteswap.h

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: byteswap.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: byteswap.h,v 30.1 2007/03/16 11:09:46 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/byteswap.h,v $
  *
  * Under source code control:	1995/10/11 04:44:01
@@ -33,7 +33,11 @@
 #define __BYTESWAP_H__
 
 
-#include "longbits.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "longbits.h"
+#else
+# include <calc/longbits.h>
+#endif
 
 
 /*

cal/Makefile

@@ -2,7 +2,7 @@
 #
 # cal - makefile for calc standard resource files
 #
-# Copyright (C) 1999  Landon Curt Noll
+# Copyright (C) 1999-2006  Landon Curt Noll
 #
 # Calc is open software; you can redistribute it and/or modify it under
 # the terms of the version 2.1 of the GNU Lesser General Public License
@@ -16,10 +16,10 @@
 # A copy of version 2.1 of the GNU Lesser General Public License is
 # distributed with calc under the filename COPYING-LGPL.  You should have
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
-# 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+# 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 29.9 $
-# @(#) $Id: Makefile,v 29.9 2001/05/28 21:56:08 chongo Exp $
+# @(#) $Revision: 30.4 $
+# @(#) $Id: Makefile,v 30.4 2010/09/02 06:01:39 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/Makefile,v $
 #
 # Under source code control:	1991/07/21 05:00:54
@@ -33,19 +33,131 @@
 
 # required vars
 #
-SHELL = /bin/sh
-MAKE_FILE = Makefile
+SHELL= /bin/sh
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
-#
-# where to install things
-#SHAREDIR= /usr/local/lib
-#SHAREDIR= /usr/lib
-SHAREDIR= /usr/share
-#SHAREDIR= /usr/libdata
+####
 
-CSHAREDIR= ${SHAREDIR}/calc
+# Normally certain files depend on the Makefile.  If the Makefile is
+# changed, then certain steps should be redone.  If MAKE_FILE is
+# set to Makefile, then these files will depend on Makefile.  If
+# MAKE_FILE is empty, then they wont.
+#
+# If in doubt, set MAKE_FILE to Makefile
+#
+MAKE_FILE= Makefile
+
+# Controlling file makefile basename (without the path)
+#
+# This is the basename same of the makefile that may/does/will drive
+# this makefile.
+#
+# If in doubt, set TOP_MAKE_FILE to Makefile
+#
+TOP_MAKE_FILE= Makefile
+
+# Where the system include (.h) files are kept
+#
+# For DJGPP, select:
+#
+#	INCDIR= /dev/env/DJDIR/include
+#
+# If in doubt, set:
+#
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with ${T}, which
+#	by default is empty.  If ${T} is non-empty, then installation
+#	locations will be relative to the ${T} directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with ${T}, which
+#	by default is empty.  If ${T} is non-empty, then installation
+#	locations will be relative to the ${T} directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+SCRIPTDIR= ${BINDIR}/cscript
+
+# T - top level directory under which calc will be installed
+#
+# The calc install is performed under ${T}, the calc build is
+# performed under /.	The purpose for ${T} is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
+#
+# If ${T} is empty, calc is installed under /, which is the same
+# top of tree for which it was built.  If ${T} is non-empty, then
+# calc is installed under ${T}, as if one had to chroot under
+# ${T} for calc to operate.
+#
+# If in doubt, use T=
+#
+T=
 
 # Makefile debug
 #
@@ -59,6 +171,14 @@ Q=@
 #
 CHMOD= chmod
 CMP= cmp
+RM= rm
+MKDIR= mkdir
+RMDIR= rmdir
+CP= cp
+MV= mv
+CO= co
+TRUE= true
+TOUCH= touch
 
 # The calc files to install
 #
@@ -66,13 +186,15 @@ CALC_FILES= README bigprime.cal deg.cal ellip.cal lucas.cal lucas_chk.cal \
 	lucas_tbl.cal mersenne.cal mod.cal pell.cal pi.cal pix.cal \
 	pollard.cal poly.cal psqrt.cal quat.cal regress.cal solve.cal \
 	sumsq.cal surd.cal unitfrac.cal varargs.cal chrem.cal mfactor.cal \
-	bindings randmprime.cal test1700.cal randrun.cal \
+	bindings randmprime.cal test1700.cal randrun.cal linear.cal \
 	randbitrun.cal bernoulli.cal test2300.cal test2600.cal \
 	test2700.cal test3100.cal test3300.cal test3400.cal prompt.cal \
 	test3500.cal seedrandom.cal test4000.cal test4100.cal test4600.cal \
 	beer.cal hello.cal test5100.cal test5200.cal randombitrun.cal \
-	randomrun.cal xx_print.cal natnumset.cal qtime.cal test8400.cal \
-	test8500.cal test8600.cal chi.cal intfile.cal
+	randomrun.cal repeat.cal xx_print.cal natnumset.cal qtime.cal \
+	test8400.cal test8500.cal test8600.cal chi.cal intfile.cal screen.cal \
+	dotest.cal set8700.cal set8700.line alg_config.cal sumtimes.cal \
+	dms.cal hms.cal
 
 # These files are found (but not built) in the distribution
 #
@@ -87,8 +209,8 @@ all: ${CALC_FILES} ${MAKE_FILE} .all
 # used by the upper level Makefile to determine of we have done all
 #
 .all:
-	rm -f .all
-	touch .all
+	${RM} -f .all
+	${TOUCH} .all
 
 ##
 #
@@ -104,15 +226,17 @@ all: ${CALC_FILES} ${MAKE_FILE} .all
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q} for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo cal/$$i; \
+	    fi; \
 	done
 
 distdir:
-	${Q}echo cal
+	${Q} echo cal
 
 calcliblist:
-	${Q}for i in ${CALCLIBLIST} /dev/null; do \
+	${Q} for i in ${CALCLIBLIST} /dev/null; do \
 	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo cal/$$i; \
 	    fi; \
@@ -124,12 +248,11 @@ calcliblist:
 #
 ##
 
-echo_CALC_FILES: ${MAKE_FILE}
-	@echo ${CALC_FILES}
-
-echo_install.list: ${MAKE_FILE}
-	@for i in ${CALC_FILES}; do \
-	    echo ${CSHAREDIR}/$$i; \
+echo_inst_files:
+	${Q} for i in ${CALC_FILES} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CALC_SHAREDIR}/$$i; \
+	    fi; \
 	done
 
 ##
@@ -140,34 +263,62 @@ echo_install.list: ${MAKE_FILE}
 
 clean:
 
-clobber:
-	rm -f .all
+clobber: clean
+	${RM} -f .all
 
+# install everything
+#
+# NOTE: Keep the uninstall rule in reverse order to the install rule
+#
 install: all
-	-${Q}if [ ! -d ${SHAREDIR} ]; then \
-		echo mkdir ${SHAREDIR}; \
-		mkdir ${SHAREDIR}; \
-		echo ${CHMOD} 0755 ${SHAREDIR}; \
-		${CHMOD} 0755 ${SHAREDIR}; \
+	-${Q} if [ ! -d ${T}${CALC_SHAREDIR} ]; then \
+	    echo ${MKDIR} ${T}${CALC_SHAREDIR}; \
+	    ${MKDIR} ${T}${CALC_SHAREDIR}; \
+	    if [ ! -d "${T}${CALC_SHAREDIR}" ]; then \
+		echo ${MKDIR} -p "${T}${CALC_SHAREDIR}"; \
+		${MKDIR} -p "${T}${CALC_SHAREDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 ${T}${CALC_SHAREDIR}; \
+	    ${CHMOD} 0755 ${T}${CALC_SHAREDIR}; \
 	else \
-	    true; \
+	    ${TRUE}; \
 	fi
-	-${Q}if [ ! -d ${CSHAREDIR} ]; then \
-		echo mkdir ${CSHAREDIR}; \
-		mkdir ${CSHAREDIR}; \
-		echo ${CHMOD} 0755 ${CSHAREDIR}; \
-		${CHMOD} 0755 ${CSHAREDIR}; \
-	else \
-	    true; \
-	fi
-	${Q}for i in ${CALC_FILES}; do \
-	    if ${CMP} -s $$i ${CSHAREDIR}/$$i; then \
-		true; \
+	${Q} for i in ${CALC_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s $$i ${T}${CALC_SHAREDIR}/$$i; then \
+		${TRUE}; \
 	    else \
-		rm -f ${CSHAREDIR}/$$i.new; \
-		cp -f $$i ${CSHAREDIR}/$$i.new; \
-		${CHMOD} 0444 ${CSHAREDIR}/$$i.new; \
-		mv -f ${CSHAREDIR}/$$i.new ${CSHAREDIR}/$$i; \
-		echo "installed ${CSHAREDIR}/$$i"; \
+		${RM} -f ${T}${CALC_SHAREDIR}/$$i.new; \
+		${CP} -f $$i ${T}${CALC_SHAREDIR}/$$i.new; \
+		${CHMOD} 0444 ${T}${CALC_SHAREDIR}/$$i.new; \
+		${MV} -f ${T}${CALC_SHAREDIR}/$$i.new ${T}${CALC_SHAREDIR}/$$i; \
+		echo "installed ${T}${CALC_SHAREDIR}/$$i"; \
+	    fi; \
+	done
+
+# Try to remove everything that was installed
+#
+# NOTE: Keep the uninstall rule in reverse order to the install rule
+#
+uninstall:
+	-${Q} for i in ${CALC_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if [ -f "${T}${CALC_SHAREDIR}/$$i" ]; then \
+	    	${RM} -f "${T}${CALC_SHAREDIR}/$$i"; \
+		if [ -f "${T}${CALC_SHAREDIR}/$$i" ]; then \
+		   echo "cannot uninstall ${T}${CALC_SHAREDIR}/$$i"; \
+		else \
+		   echo "uninstalled ${T}${CALC_SHAREDIR}/$$i"; \
+		fi; \
+	    fi; \
+	done
+	-${Q} for i in ${CALC_SHAREDIR}; do \
+	    if [ -d "${T}$$i" ]; then \
+		${RMDIR} "${T}$$i" 2>/dev/null; \
+		echo "cleaned up ${T}$$i"; \
 	    fi; \
 	done

cal/README

@@ -12,7 +12,7 @@ Normally a resource file will simply define some functions.  By default,
 most resource files will print out a short message when they are read.
 For example:
 
-    > read lucas
+    ; read lucas
     lucas(h,n) defined
     gen_u0(h,n,v1) defined
     gen_v1(h,n) defined
@@ -22,9 +22,9 @@ will cause calc to load and execute the 'lucas.cal' resource file.
 Executing the resource file will cause several functions to be defined.
 Executing the lucas function:
 
-    > lucas(149,60)
+    ; lucas(149,60)
 	    1
-    > lucas(146,61)
+    ; lucas(146,61)
 	    0
 
 shows that 149*2^60-1 is prime whereas 146*2^61-1 is not.
@@ -75,7 +75,7 @@ have meanings are as follows:
 	is displayed.
 
     2	Show func will display more information about a functions
-	arguments as well as more argument sdummary information.
+	arguments as well as more argument summary information.
 
     3	During execution, allow calc standard resource files
 	to output additional debugging information.
@@ -103,7 +103,7 @@ either of the bottom 2 bits set:
 		print "funcB(size, mass, ...) defined";
 	}
 
-If your the resource file needs to output special debugging informatin,
+If your the resource file needs to output special debugging information,
 we recommend that you check for bit 3 of the config("resource_debug")
 before printing the debug statement:
 
@@ -117,12 +117,68 @@ The following is a brief description of some of the calc resource files
 that are shipped with calc.  See above for example of how to read in
 and execute these files.
 
+alg_config.cal
+
+    global test_time
+    mul_loop(repeat,x) defined
+    mul_ratio(len) defined
+    best_mul2() defined
+    sq_loop(repeat,x) defined
+    sq_ratio(len) defined
+    best_sq2() defined
+    pow_loop(repeat,x,ex) defined
+    pow_ratio(len) defined
+    best_pow2() defined
+
+    These functions search for an optimal value of config("mul2"),
+    config("sq2"), and config("pow2").  The calc default values of these
+    configuration values were set by running this resource file on a
+    1.8GHz AMD 32-bit CPU of ~3406 BogoMIPS.
+
+    The best_mul2() function returns the optimal value of config("mul2").
+    The best_sq2() function returns the optimal value of config("sq2").
+    The best_pow2() function returns the optimal value of config("pow2").
+    The other functions are just support functions.
+
+    By design, best_mul2(), best_sq2(), and best_pow2() take a few
+    minutes to run.  These functions increase the number of times a
+    given computational loop is executed until a minimum amount of CPU
+    time is consumed.  To watch these functions progress, one can set
+    the config("user_debug") value.
+
+    Here is a suggested way to use this resource file:
+
+	; read alg_config
+	; config("user_debug",2),;
+	; best_mul2(); best_sq2(); best_pow2();
+	; best_mul2(); best_sq2(); best_pow2();
+	; best_mul2(); best_sq2(); best_pow2();
+
+    NOTE: It is perfectly normal for the optimal value returned to differ
+    slightly from run to run.  Slight variations due to inaccuracy in
+    CPU timings will cause the best value returned to differ slightly
+    from run to run.
+
+    One can use a calc startup file to change the initial values of
+    config("mul2"), config("sq2"), and config("pow2").  For example one
+    can place into ~/.calcrc these lines:
+
+	config("mul2", 1780),;
+	config("sq2", 3388),;
+	config("pow2", 176),;
+
+    to automatically and silently change these config values.
+    See help/config and CALCRC in help/environment for more information.
+
+
 beer.cal
 
     Calc's contribution to the 99 Bottles of Beer web page:
 
 	http://www.ionet.net/~timtroyr/funhouse/beer.html#calc
 
+     NOTE: This resource produces a lot of output.  :-)
+
 
 bernoulli.cal
 
@@ -132,7 +188,7 @@ bernoulli.cal
 
     NOTE: There is now a bernoulli() builtin function.  This file is
     	  left here for backward compatibility and now simply returns
-	  the buildin function.
+	  the builtin function.
 
 
 bigprime.cal
@@ -153,9 +209,9 @@ chi.cal
 
     The chi_prob() function does not work well with odd degrees of freedom.
     It is reasonable with even degrees of freedom, although one must give
-    a sifficently small error term as the degress gets large (>100).
+    a sufficiently small error term as the degrees gets large (>100).
 
-    The Z(x) and P(x) are internal statistical funcions.
+    The Z(x) and P(x) are internal statistical functions.
 
     eps is an optional epsilon() like error term.
 
@@ -170,14 +226,69 @@ chrem.cal
 
 deg.cal
 
+    deg(deg, min, sec)
+    deg_add(a, b)
+    deg_neg(a)
+    deg_sub(a, b)
+    deg_mul(a, b)
+    deg_print(a)
+
+    Calculate in degrees, minutes, and seconds.  For a more functional
+    version see dms.cal.
+
+
+dms.cal
+
     dms(deg, min, sec)
     dms_add(a, b)
     dms_neg(a)
     dms_sub(a, b)
     dms_mul(a, b)
     dms_print(a)
+    dms_abs(a)
+    dms_norm(a)
+    dms_test(a)
+    dms_int(a)
+    dms_frac(a)
+    dms_rel(a,b)
+    dms_cmp(a,b)
+    dms_inc(a)
+    dms_dec(a)
 
-    Calculate in degrees, minutes, and seconds.
+    Calculate in degrees, minutes, and seconds.  Unlike deg.cal, increments
+    are on the arc second level.  See also hms.cal.
+
+
+dotest.cal
+
+    dotest(dotest_file [,dotest_code [,dotest_maxcond]])
+
+    dotest_file
+
+	Search along CALCPATH for dotest_file, which contains lines that
+	should evaluate to 1.  Comment lines and empty lines are ignored.
+	Comment lines should use ## instead of the multi like /* ... */
+	because lines are evaluated one line at a time.
+
+    dotest_code
+
+	Assign the code number that is to be printed at the start of
+	each non-error line and after **** in each error line.
+	The default code number is 999.
+
+    dotest_maxcond
+
+	The maximum number of error conditions that may be detected.
+	An error condition is not a sign of a problem, in some cases
+	a line deliberately forces an error condition.	A value of -1,
+	the default, implies a maximum of 2147483647.
+
+    Global variables and functions must be declared ahead of time because
+    the dotest scope of evaluation is a line at a time.  For example:
+
+	read dotest.cal
+	read set8700.cal
+	dotest("set8700.line");
 
 
 ellip.cal
@@ -194,6 +305,29 @@ hello.cal
 	http://www.latech.edu/~acm/HelloWorld.shtml
 	http://www.latech.edu/~acm/helloworld/calc.html
 
+     NOTE: This resource produces a lot of output.  :-)
+
+
+hms.cal
+
+    hms(hour, min, sec)
+    hms_add(a, b)
+    hms_neg(a)
+    hms_sub(a, b)
+    hms_mul(a, b)
+    hms_print(a)
+    hms_abs(a)
+    hms_norm(a)
+    hms_test(a)
+    hms_int(a)
+    hms_frac(a)
+    hms_rel(a,b)
+    hms_cmp(a,b)
+    hms_inc(a)
+    hms_dec(a)
+
+    Calculate in hours, minutes, and seconds.  See also dmscal.
+
 
 intfile.cal
 
@@ -222,6 +356,14 @@ intfile.cal
 	of the integer become the last octets of the file.
 
 
+linear.cal
+
+    linear(x0, y0, x1, y1, x)
+
+    Returns the value y such that (x,y) in on the line (x0,y0), (x1,y1).
+    Requires x0 != y0.
+
+
 lucas.cal
 
     lucas(h, n)
@@ -480,6 +622,16 @@ randrun.cal
 
     This tests the a55 generator.
 
+repeat.cal
+
+    repeat(digit_set, repeat_count)
+
+    Return the value of the digit_set repeated repeat_count times.
+    Both digit_set and repeat_count must be integers > 0.
+
+    For example repeat(423,5) returns the value 423423423423423,
+    which is the digit_set 423 repeated 5 times.
+
 
 regress.cal
 
@@ -487,6 +639,58 @@ regress.cal
     Errors are reported with '****' messages, or worse. :-)
 
 
+screen.cal
+
+    up
+    CUU	/* same as up */
+    down = CUD
+    CUD	/* same as down */
+    forward
+    CUF	/* same as forward */
+    back = CUB
+    CUB	/* same as back */
+    save
+    SCP	/* same as save */
+    restore
+    RCP	/* same as restore */
+    cls
+    home
+    eraseline
+    off
+    bold
+    faint
+    italic
+    blink
+    rapidblink
+    reverse
+    concealed
+    /* Lowercase indicates foreground, uppercase background */
+    black
+    red
+    green
+    yellow
+    blue
+    magenta
+    cyan
+    white
+    Black
+    Red
+    Green
+    Yellow
+    Blue
+    Magenta
+    Cyan
+    White
+
+    Define ANSI control sequences providing (i.e., cursor movement, changing
+    foreground or background color, etc.) for VT100 terminals and terminal
+    window emulators (i.e., xterm, Apple OS/X Terminal, etc.) that support them.
+
+    For example:
+
+	read screen
+	print green:"This is green. ":red:"This is red.":black
+
 seedrandom.cal
 
     seedrandom(seed1, seed2, bitsize [,trials])
@@ -505,6 +709,24 @@ seedrandom.cal
     Blum primes for the modulus.
 
 
+set8700.cal
+
+    set8700_getA1() defined
+    set8700_getA2() defined
+    set8700_getvar() defined
+    set8700_f(set8700_x) defined
+    set8700_g(set8700_x) defined
+
+    Declare globals and define functions needed by dotest() (see
+    dotest.cal) to evaluate set8700.line a line at a time.
+
+
+set8700.line
+
+    A line-by-line evaluation file for dotest() (see dotest.cal).
+    The set8700.cal file (and dotest.cal) should be read first.
+
+
 solve.cal
 
     solve(low, high, epsilon)
@@ -523,6 +745,27 @@ sumsq.cal
     4N+1, and always impossible for primes of the form 4N-1.
 
 
+sumtimes.cal
+
+    timematsum(N)
+    timelistsum(N)
+    timematsort(N)
+    timelistsort(N)
+    timematreverse(N)
+    timelistreverse(N)
+    timematssq(N)
+    timelistssq(N)
+    timehmean(N,M)
+    doalltimes(N)
+
+    Give the user CPU time for various ways of evaluating sums, sums of
+    squares, etc, for large lists and matrices.  N is the size of
+    the list or matrix to use.  The doalltimes() function will run
+    all fo the sumtimes tests.  For example:
+
+    	doalltimes(1e6);
+
+
 surd.cal
 
     surd(a, b)
@@ -813,10 +1056,10 @@ xx_print.cal
 ## A copy of version 2.1 of the GNU Lesser General Public License is
 ## distributed with calc under the filename COPYING-LGPL.  You should have
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
-## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 ##
-## @(#) $Revision: 29.8 $
-## @(#) $Id: README,v 29.8 2001/03/31 16:26:23 chongo Exp $
+## @(#) $Revision: 30.2 $
+## @(#) $Id: README,v 30.2 2010/09/02 06:01:39 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/README,v $
 ##
 ## Under source code control:	1990/02/15 01:50:32

cal/beer.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: beer.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: beer.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/beer.cal,v $
  *
  * Under source code control:	1996/11/13 13:21:05

cal/bernoulli.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: bernoulli.cal,v 29.3 2000/12/17 12:26:04 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: bernoulli.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/bernoulli.cal,v $
  *
  * Under source code control:	1991/09/30 11:18:41

cal/bigprime.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: bigprime.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: bigprime.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/bigprime.cal,v $
  *
  * Under source code control:	1991/05/22 21:56:32

cal/bindings

@@ -14,10 +14,10 @@
 # A copy of version 2.1 of the GNU Lesser General Public License is
 # distributed with calc under the filename COPYING-LGPL.  You should have
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
-# 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+# 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 29.2 $
-# @(#) $Id: bindings,v 29.2 2000/06/07 14:02:25 chongo Exp $
+# @(#) $Revision: 30.1 $
+# @(#) $Id: bindings,v 30.1 2007/03/16 11:09:54 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/bindings,v $
 #
 # Under source code control:	1993/05/02 20:09:19

cal/chi.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: chi.cal,v 29.2 2001/04/08 10:21:23 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: chi.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/chi.cal,v $
  *
  * Under source code control:	2001/03/27 14:10:11

cal/chrem.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: chrem.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: chrem.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/chrem.cal,v $
  *
  * Under source code control:	1992/09/26 01:00:47

cal/deg.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: deg.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: deg.cal,v 30.2 2010/09/02 06:01:14 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/deg.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:33
@@ -28,9 +28,9 @@
  */
 
 
-obj dms {deg, min, sec};
+obj deg {deg, min, sec};
 
-define dms(deg, min, sec)
+define deg(deg, min, sec)
 {
 	local ans;
 
@@ -38,18 +38,18 @@ define dms(deg, min, sec)
 		sec = 0;
 	if (isnull(min))
 		min = 0;
-	obj dms ans;
+	obj deg ans;
 	ans.deg = deg;
 	ans.min = min;
 	ans.sec = sec;
-	fixdms(&ans);
+	fixdeg(ans);
 	return ans;
 }
 
 
-define dms_add(a, b)
+define deg_add(a, b)
 {
-	local obj dms	ans;
+	local obj deg	ans;
 
 	ans.deg = 0;
 	ans.min = 0;
@@ -66,31 +66,31 @@ define dms_add(a, b)
 		ans.sec += b.sec;
 	} else
 		ans.deg += b;
-	fixdms(&ans);
+	fixdeg(ans);
 	return ans;
 }
 
 
-define dms_neg(a)
+define deg_neg(a)
 {
-	local obj dms	ans;
+	local obj deg	ans;
 
-	ans.deg = -ans.deg;
-	ans.min = -ans.min;
-	ans.sec = -ans.sec;
+	ans.deg = -a.deg;
+	ans.min = -a.min;
+	ans.sec = -a.sec;
 	return ans;
 }
 
 
-define dms_sub(a, b)
+define deg_sub(a, b)
 {
 	return a - b;
 }
 
 
-define dms_mul(a, b)
+define deg_mul(a, b)
 {
-	local obj dms	ans;
+	local obj deg	ans;
 
 	if (istype(a, ans) && istype(b, ans))
 		quit "Cannot multiply degrees together";
@@ -103,24 +103,24 @@ define dms_mul(a, b)
 		ans.min = b.min * a;
 		ans.sec = b.sec * a;
 	}
-	fixdms(&ans);
+	fixdeg(ans);
 	return ans;
 }
 
 
-define dms_print(a)
+define deg_print(a)
 {
 	print a.deg : 'd' : a.min : 'm' : a.sec : 's' :;
 }
 
 
-define dms_abs(a)
+define deg_abs(a)
 {
 	return a.deg + a.min / 60 + a.sec / 3600;
 }
 
 
-define fixdms(a)
+define fixdeg(a)
 {
 	a.min += frac(a.deg) * 60;
 	a.deg = int(a.deg);
@@ -134,5 +134,5 @@ define fixdms(a)
 }
 
 if (config("resource_debug") & 3) {
-    print "obj dms {deg, min, sec} defined";
+    print "obj deg {deg, min, sec} defined";
 }

cal/dms.cal

@@ -0,0 +1,384 @@
+/*
+ * dms - calculate in degrees, minutes, and seconds (based on deg)
+ *
+ * Copyright (C) 1999,2010  David I. Bell and Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: dms.cal,v 30.2 2010/09/02 06:14:16 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/dms.cal,v $
+ *
+ * Under source code control:	1990/02/15 01:50:33
+ * File existed as early as:	before 1990
+ *
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+obj dms {deg, min, sec};
+
+define dms(deg, min, sec)
+{
+    local obj dms ans;		/* return value */
+
+    /* default missing args to 0 */
+    if (isnull(sec)) {
+	sec = 0;
+    }
+    if (isnull(min)) {
+	min = 0;
+    }
+
+    /* load object */
+    ans.deg = deg;
+    ans.min = min;
+    ans.sec = sec;
+
+    /* return properly formed object */
+    ans = fixdms(ans);
+    return ans;
+}
+
+
+define dms_add(a, b)
+{
+    local obj dms ans;		/* return value */
+
+    /* initalize value to 1st arg */
+    if (istype(a, ans)) {
+	/* 1st arg is dms object, load it */
+	ans.deg = a.deg;
+	ans.min = a.min;
+	ans.sec = a.sec;
+    } else {
+	/* 1st arg is not dms, assume scalar degrees */
+	ans.deg = a;
+	ans.min = 0;
+	ans.sec = 0;
+    }
+
+    /* add value of 2nd arg */
+    if (istype(b, ans)) {
+	/* 2nd arg is dms object, add it */
+	ans.deg += b.deg;
+	ans.min += b.min;
+	ans.sec += b.sec;
+    } else {
+	/* 2nd arg is not dms, add scalar degrees */
+	ans.deg += b;
+    }
+
+    /* return normalized result */
+    ans = fixdms(ans);
+    return ans;
+}
+
+
+define dms_neg(a)
+{
+    local obj dms ans;		/* return value */
+
+    /* negate argument */
+    if (istype(a, ans)) {
+	/* 1st arg is dms object, load it */
+	ans.deg = -a.deg;
+	ans.min = -a.min;
+	ans.sec = -a.sec;
+    } else {
+	/* 2nd arg is not dms, negate scalar degrees */
+	ans.deg = -a;
+	ans.min = 0;
+	ans.sec = 0;
+    }
+
+    /* return normalized result */
+    ans = fixdms(ans);
+    return ans;
+}
+
+
+define dms_sub(a, b)
+{
+    local obj dms ans;		/* return value */
+
+    /* initalize value to 1st arg */
+    if (istype(a, ans)) {
+	/* 1st arg is dms object, load it */
+	ans.deg = a.deg;
+	ans.min = a.min;
+	ans.sec = a.sec;
+    } else {
+	/* 1st arg is not dms, assume scalar degrees */
+	ans.deg = a;
+	ans.min = 0;
+	ans.sec = 0;
+    }
+
+    /* subtract value of 2nd arg */
+    if (istype(b, ans)) {
+	/* 2nd arg is dms object, subtract it */
+	ans.deg -= b.deg;
+	ans.min -= b.min;
+	ans.sec -= b.sec;
+    } else {
+	/* 2nd arg is not dms, subtract scalar degrees */
+	ans.deg -= b;
+    }
+
+    /* return normalized result */
+    ans = fixdms(ans);
+    return ans;
+}
+
+
+define dms_mul(a, b)
+{
+    local obj dms ans;		/* return value */
+
+    /* dms object multiplication */
+    if (istype(a, ans) && istype(b, ans)) {
+	ans.deg = dms_abs(a) * dms_abs(b);
+	ans.min = 0;
+	ans.sec = 0;
+
+    /* scalar multiplication */
+    } else if (istype(a, ans)) {
+	ans.deg = a.deg * b;
+	ans.min = a.min * b;
+	ans.sec = a.sec * b;
+    } else {
+	ans.deg = b.deg * a;
+	ans.min = b.min * a;
+	ans.sec = b.sec * a;
+    }
+
+    /* return normalized result */
+    ans = fixdms(ans);
+    return ans;
+}
+
+
+define dms_print(a)
+{
+    local obj dms ans;		/* temp object for dms type testing */
+
+    /* firewall - arg must be a dms object */
+    if (! istype(a, ans)) {
+	quit "dms_print called with non dms object";
+    }
+
+    /* print in dms form */
+    print a.deg : 'd' : a.min : 'm' : a.sec : 's' :;
+}
+
+
+define dms_abs(a)
+{
+    local obj dms ans;		/* temp object for dms type testing */
+    local deg;			/* return scalar value */
+
+    /* firewall - just absolute value non dms objects */
+    if (! istype(a, ans)) {
+    	return abs(a);
+    }
+
+    /* compute degrees */
+    deg = a.deg + a.min / 60 + a.sec / 3600;
+
+    /* return degrees */
+    return deg;
+}
+
+
+define dms_norm(a)
+{
+    local obj dms ans;		/* temp object for dms type testing */
+    local deg;			/* degrees */
+
+    /* firewall - arg must be a dms object */
+    if (! istype(a, ans)) {
+	quit "dms_norm called with non dms object";
+    }
+
+    /* square degrees (norm is the square of absolute value */
+    deg = dms_abs(a);
+
+    /* return degrees */
+    return deg*deg;
+}
+
+
+define dms_test(a)
+{
+    local obj dms ans;		/* temp value */
+
+    /* firewall - arg must be a dms object */
+    if (! istype(a, ans)) {
+	quit "dms_test called with non dms object";
+    }
+
+    /* return false of non-zero */
+    ans = fixdms(a);
+    if (ans.deg == 0 && ans.min == 0 && ans.sec == 0) {
+	/* false */
+	return 0;
+    }
+    /* true */
+    return 1;
+}
+
+
+define dms_int(a)
+{
+    local obj dms ans;		/* return value */
+
+    /* firewall - arg must be a dms object */
+    if (! istype(a, ans)) {
+	quit "dms_int called with non dms object";
+    }
+
+    /* normalize the argument */
+    ans = fixdms(a);
+
+    /* truncate to the nearest second */
+    ans.sec = int(ans.sec);
+
+    /* return value to the nearest second */
+    return ans;
+}
+
+
+define dms_frac(a)
+{
+    local obj dms ans;		/* return value */
+
+    /* firewall - arg must be a dms object */
+    if (! istype(a, ans)) {
+	quit "dms_frac called with non dms object";
+    }
+
+    /* normalize the argument */
+    ans = fixdms(a);
+
+    /* remove all but fractional seconds */
+    ans.deg = 0;
+    ans.min = 0;
+    ans.sec = frac(ans.sec);
+
+    /* return value to the second fraction */
+    return ans;
+}
+
+
+define dms_rel(a,b)
+{
+    local abs_a, abs_b;		/* scalars of the arguments */
+
+    /* compute scalars of the arguments */
+    abs_a = dms_abs(a);
+    abs_b = dms_abs(b);
+
+    /* return the comparison */
+    return cmp(abs_a, abs_b);
+}
+
+
+define dms_cmp(a,b)
+{
+    local abs_a, abs_b;		/* scalars of the arguments */
+
+    /* compute scalars of the arguments */
+    abs_a = dms_abs(a);
+    abs_b = dms_abs(b);
+
+    /* return the equality comparison */
+    return (abs_a == abs_b);
+}
+
+
+define dms_inc(a)
+{
+    local obj dms ans;		/* return value */
+
+    /* increment a dms object */
+    if (istype(a, ans)) {
+	ans = a;
+	++ans.sec;
+
+	/* return normalized result */
+	ans = fixdms(ans);
+	return ans;
+    }
+
+    /* increment a scalar */
+    return a+1;
+}
+
+
+define dms_dec(a)
+{
+    local obj dms ans;		/* return value */
+
+    /* decrement a dms object */
+    if (istype(a, ans)) {
+	ans = a;
+	--ans.sec;
+
+	/* return normalized result */
+	ans = fixdms(ans);
+	return ans;
+    }
+
+    /* decrement a scalar */
+    return a-1;
+}
+
+
+define fixdms(a)
+{
+    local obj dms ans;		/* temp value */
+
+    /* firewall */
+    if (! istype(a, ans)) {
+	quit "attempt to fix a non dms object";
+    }
+
+    /* force minutes to be intergral */
+    a.min += frac(a.deg) * 60;
+    a.deg = int(a.deg);
+
+    /* force degrees to be intergral */
+    a.sec += frac(a.min) * 60;
+    a.min = int(a.min);
+
+    /* carry excess seconds into minutes */
+    a.min += a.sec // 60;
+    a.sec %= 60;
+
+    /* carry excess minutes into degrees */
+    a.deg += a.min // 60;
+    a.min %= 60;
+
+    /* round degrees :-) */
+    a.deg %= 360;
+
+    /* return normalized result */
+    return a;
+}
+
+if (config("resource_debug") & 3) {
+    print "obj dms {deg, min, sec} defined";
+}

cal/dotest.cal

@@ -0,0 +1,193 @@
+/*
+ * dotest - test truth statements found in line tests of dotest_testline file
+ *
+ * This file was created by Ernest Bowen <ebowen at une dot edu dot au>
+ * and modified by Landon Curt Noll.
+ *
+ * This dotest_code has been placed in the public domain.  Please do not
+ * copyright this dotest_code.
+ *
+ * ERNEST BOWEN AND LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO
+ * THIS	 SOFTWARE,  INCLUDING  ALL IMPLIED WARRANTIES OF MER-
+ * CHANTABILITY AND FITNESS.  IN NO EVENT SHALL	 LANDON	 CURT
+ * NOLL	 BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM  LOSS  OF
+ * USE,	 DATA  OR  PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR  IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: dotest.cal,v 30.2 2007/03/16 11:09:54 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/dotest.cal,v $
+ *
+ * This file is not covered under version 2.1 of the GNU LGPL.
+ *
+ * Under source dotest_code control:	2006/03/08 05:54:09
+ * File existed as early as:	2006
+ */
+
+
+/*
+ * dotest - perform tests from dotest_testline file
+ *
+ * given:
+ *	dotest_file	filename containing single test lines
+ *	dotest_code	regress.cal test number to use (def: 0)
+ *	dotest_maxcond	max error conditions allowed (def: <0 ==> 2^31-1)
+ *
+ * returns:
+ *	number of line test failures
+ *
+ * NOTE: All variables used by the dotest() function start with "dotest_".
+ *	 The dotest_file and dotest_read should not use any variable
+ *	 that starts with "dotest_".
+ */
+define dotest(dotest_file, dotest_code = 0, dotest_maxcond = -1)
+{
+    local dotest_f_file;	/* open file containing test lines */
+    local dotest_testline;	/* test line */
+    local dotest_testeval;	/* eval value from dotest_testline test line */
+    local dotest_tmperrcnt;	/* temp error count after line test */
+    local dotest_errcnt;	/* total number of errors */
+    local dotest_failcnt;	/* number of line tests failed */
+    local dotest_testnum;	/* number of test lines evaluated */
+    local dotest_linenum;	/* test line number */
+    local dotest_old_errmax;	/* value of errmax() prior to calling */
+    local dotest_old_errcount;	/* value of errcount() prior to calling */
+
+    /*
+     * preserve calling stats
+     */
+    dotest_old_errmax = errmax();
+    dotest_old_errcount = errcount(0);
+
+    /*
+     * initialize test accounting
+     */
+    dotest_errcnt = errcount();
+    dotest_failcnt = 0;
+    dotest_testnum = 0;
+    dotest_linenum = 0;
+
+    /*
+     * setup error accounting for dotest
+     */
+    if (dotest_maxcond >= 0 && dotest_maxcond < 2147483647) {
+	    errmax(dotest_maxcond + dotest_old_errcount + 1),;
+    } else {
+	    errmax(2147483647),;
+    }
+
+    /*
+     * open the test line file
+     */
+    printf("%d-: opening line file: %d", dotest_code, dotest_file);
+    dotest_f_file = fpathopen(dotest_file, "r");
+    if (!isfile(dotest_f_file)) {
+	printf("**** Unable to file or open file \"%s\"\n",
+		dotest_file);
+	quit;
+    }
+    printf('%d: testing "%s"\n', dotest_code, dotest_file);
+
+    /*
+     * perform dotest_testline test on each line of the file
+     */
+    for (;;) {
+
+	/* get the next test line */
+	dotest_testline = fgets(dotest_f_file);
+	++dotest_linenum;
+	if (iserror(dotest_testline)) {
+	    quit "**** Error while reading file";
+	} else if (isnull(dotest_testline)) {
+	    /* EOF - end of test file */
+	    break;
+	}
+
+	/* skip empty lines */
+	if (dotest_testline == "\n") {
+	    continue;
+	}
+
+	/* evaluate the test line */
+	dotest_testeval = eval(dotest_testline);
+
+	/* ignore white space or comment lines */
+	if (isnull(dotest_testeval)) {
+	    continue;
+	}
+
+	/* look for test line parse errors */
+	if (iserror(dotest_testeval)) {
+	    printf("**** evaluation error: ");
+	    ++dotest_failcnt;
+
+	/* look for test line dotest_failcnt */
+	} else if (dotest_testeval != 1) {
+	    printf("**** did not return 1: ");
+	    ++dotest_failcnt;
+	}
+
+	/* show the test line we just performed */
+	printf("%d-%d: %s", dotest_code, dotest_linenum, dotest_testline);
+
+	/* error accounting */
+	dotest_tmperrcnt = errcount() - dotest_errcnt;
+	if (dotest_tmperrcnt > 0) {
+
+	    /* report any other errors */
+	    if (dotest_tmperrcnt > 1) {
+		printf("%d-%d: NOTE: %d error conditions(s): %s\n",
+		    dotest_code, dotest_linenum, dotest_tmperrcnt);
+	    }
+
+	    /* report the calc error string */
+	    printf("%d-%d: NOTE: last error string: %s\n",
+	        dotest_code, dotest_linenum, strerror());
+
+	    /* new error count level */
+	    dotest_errcnt = errcount();
+	    if (dotest_maxcond >= 0 &&
+	        dotest_old_errcount-dotest_errcnt > dotest_maxcond) {
+		printf("%d-%d: total error conditions: %d > %d\n",
+		       dotest_code, dotest_linenum,
+		       dotest_maxcond, dotest_old_errcount-dotest_errcnt);
+	    }
+	}
+    }
+
+    /*
+     * test the close of the line file
+     */
+    printf("%d-: detected %d error condition(s), many of which may be OK\n",
+    	   dotest_code, dotest_old_errcount-dotest_errcnt);
+    printf("%d-: closing line file: %d\n", dotest_code, dotest_file);
+    fclose(dotest_f_file);
+
+    /*
+     * test line file accounting
+     */
+    if (dotest_failcnt > 0) {
+	printf("**** %d-: %d test failure(s) in %d line(s)\n",
+	    dotest_code, dotest_failcnt, dotest_linenum);
+    } else {
+	printf("%d-: no failure(s) in %d line(s)\n",
+	    dotest_code, dotest_linenum);
+    }
+
+    /*
+     * preppare to return to the caller environment
+     *
+     * We increase the caller's error count by the number
+     * of line tests that failed, not the number of internal
+     * errors that were noted.
+     */
+    errmax(dotest_old_errmax),;
+    errcount(dotest_old_errcount + dotest_failcnt),;
+
+    /*
+     * All Done!!! -- Jessica Noll, Age 2
+     */
+    return dotest_failcnt;
+}

cal/ellip.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: ellip.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: ellip.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/ellip.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:33
@@ -28,16 +28,17 @@
  */
 
 /*
- * Attempt to factor numbers using elliptic functions.
- *	y^2 = x^3 + a*x + b   (mod N).
+ * Attempt to factor numbers using elliptic functions:
  *
- * Many points (x,y) (mod N) are found that solve the above equation,
+ *	y^2 = x^3 + a*x + b   (mod ellip_N).
+ *
+ * Many points (x,y) (mod ellip_N) are found that solve the above equation,
  * starting from a trivial solution and 'multiplying' that point together
  * to generate high powers of the point, looking for such a point whose
- * order contains a common factor with N.  The order of the group of points
- * varies almost randomly within a certain interval for each choice of a
- * and b, and thus each choice provides an independent opportunity to
- * factor N.  To generate a trivial solution, a is chosen and then b is
+ * order contains a common factor with ellip_N.  The order of the group of
+ * points varies almost randomly within a certain interval for each choice of
+ * a and b, and thus each choice provides an independent opportunity to
+ * factor ellip_N.  To generate a trivial solution, a is chosen and then b is
  * selected so that (1,1) is a solution.  The multiplication is done using
  * the basic fact that the equation is a cubic, and so if a line hits the
  * curve in two rational points, then the third intersection point must
@@ -45,9 +46,9 @@
  * the number of rational solutions can be made very large.  When modular
  * arithmetic is used, solving for the third point requires the taking of a
  * modular inverse (instead of division), and if this fails, then the GCD
- * of the failing value and N provides a factor of N.  This description is
- * only an approximation, read "A Course in Number Theory and Cryptography"
- * by Neal Koblitz for a good explanation.
+ * of the failing value and ellip_N provides a factor of ellip_N.
+ * This description is only an approximation, read "A Course in Number
+ * Theory and Cryptography" by Neal Koblitz for a good explanation.
  *
  * efactor(iN, ia, B, force)
  *	iN is the number to be factored.
@@ -81,15 +82,15 @@
  *
  * If a factor is found, it is returned and is also saved in the global
  * variable f.	The number being factored is also saved in the global
- * variable N.
+ * variable ellip_N.
  */
 
 
 obj point {x, y};
-global	N;		/* number to factor */
-global	a;		/* first coefficient */
-global	b;		/* second coefficient */
-global	f;		/* found factor */
+global	ellip_N;		/* number to factor */
+global	ellip_a;		/* first coefficient */
+global	ellip_b;		/* second coefficient */
+global	ellip_f;		/* found factor */
 
 
 define efactor(iN, ia, B, force)
@@ -103,28 +104,28 @@ define efactor(iN, ia, B, force)
 	if (isnull(ia))
 		ia = 1;
 	obj point x;
-	a = ia;
-	b = -ia;
-	N = iN;
-	C = isqrt(N);
+	ellip_a = ia;
+	ellip_b = -ia;
+	ellip_N = iN;
+	C = isqrt(ellip_N);
 	C = 2 * C + 2 * isqrt(C) + 1;
-	f = 0;
-	while (f == 0) {
-		print "A =", a;
+	ellip_f = 0;
+	while (ellip_f == 0) {
+		print "A =", ellip_a;
 		x.x = 1;
 		x.y = 1;
 		print 2, x;
 		x = x ^ (2 ^ (highbit(C) + 1));
-		for (p = 3; ((p < B) && (f == 0)); p += 2) {
+		for (p = 3; ((p < B) && (ellip_f == 0)); p += 2) {
 			if (!ptest(p, 1))
 				continue;
 			print p, x;
 			x = x ^ (p ^ ((highbit(C) // highbit(p)) + 1));
 		}
-		a++;
-		b--;
+		ellip_a++;
+		ellip_b--;
 	}
-	return f;
+	return ellip_f;
 }
 
 
@@ -141,18 +142,18 @@ define point_mul(p1, p2)
 	if (p2 == 1)
 		return p1;
 	if (p1 == p2)
-		return point_square(&p1);
+		return point_square(`p1);
 	obj point r;
-	m = (minv(p2.x - p1.x, N) * (p2.y - p1.y)) % N;
+	m = (minv(p2.x - p1.x, ellip_N) * (p2.y - p1.y)) % ellip_N;
 	if (m == 0) {
-		if (f == 0)
-			f = gcd(p2.x - p1.x, N);
+		if (ellip_f == 0)
+			ellip_f = gcd(p2.x - p1.x, ellip_N);
 		r.x = 1;
 		r.y = 1;
 		return r;
 	}
-	r.x = (m^2 - p1.x - p2.x) % N;
-	r.y = ((m * (p1.x - r.x)) - p1.y) % N;
+	r.x = (m^2 - p1.x - p2.x) % ellip_N;
+	r.y = ((m * (p1.x - r.x)) - p1.y) % ellip_N;
 	return r;
 }
 
@@ -162,16 +163,16 @@ define point_square(p)
 	local	r, m;
 
 	obj point r;
-	m = ((3 * p.x^2 + a) * minv(p.y << 1, N)) % N;
+	m = ((3 * p.x^2 + ellip_a) * minv(p.y << 1, ellip_N)) % ellip_N;
 	if (m == 0) {
-		if (f == 0)
-			f = gcd(p.y << 1, N);
+		if (ellip_f == 0)
+			ellip_f = gcd(p.y << 1, ellip_N);
 		r.x = 1;
 		r.y = 1;
 		return r;
 	}
-	r.x = (m^2 - p.x - p.x) % N;
-	r.y = ((m * (p.x - r.x)) - p.y) % N;
+	r.x = (m^2 - p.x - p.x) % ellip_N;
+	r.y = ((m * (p.x - r.x)) - p.y) % ellip_N;
 	return r;
 }
 
@@ -184,10 +185,10 @@ define point_pow(p, pow)
 	if (isodd(pow))
 		r = p;
 	t = p;
-	for (bit = 2; ((bit <= pow) && (f == 0)); bit <<= 1) {
-		t = point_square(&t);
+	for (bit = 2; ((bit <= pow) && (ellip_f == 0)); bit <<= 1) {
+		t = point_square(`t);
 		if (bit & pow)
-			r = point_mul(&t, &r);
+			r = point_mul(`t, `r);
 	}
 	return r;
 }

cal/hello.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: hello.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: hello.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/hello.cal,v $
  *
  * Under source code control:	1996/11/13 13:25:43

cal/hms.cal

@@ -0,0 +1,384 @@
+/*
+ * hms - calculate in hours, minutes, and seconds
+ *
+ * Copyright (C) 2010  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: hms.cal,v 30.2 2010/09/02 06:14:16 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/hms.cal,v $
+ *
+ * Under source code control:	2010/09/01 17:14:55
+ * File existed as early as:	2010
+ *
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+obj hms {hour, min, sec};
+
+define hms(hour, min, sec)
+{
+    local obj hms ans;		/* return value */
+
+    /* default missing args to 0 */
+    if (isnull(sec)) {
+	sec = 0;
+    }
+    if (isnull(min)) {
+	min = 0;
+    }
+
+    /* load object */
+    ans.hour = hour;
+    ans.min = min;
+    ans.sec = sec;
+
+    /* return properly formed object */
+    ans = fixhms(ans);
+    return ans;
+}
+
+
+define hms_add(a, b)
+{
+    local obj hms ans;		/* return value */
+
+    /* initalize value to 1st arg */
+    if (istype(a, ans)) {
+	/* 1st arg is hms object, load it */
+	ans.hour = a.hour;
+	ans.min = a.min;
+	ans.sec = a.sec;
+    } else {
+	/* 1st arg is not hms, assume scalar hours */
+	ans.hour = a;
+	ans.min = 0;
+	ans.sec = 0;
+    }
+
+    /* add value of 2nd arg */
+    if (istype(b, ans)) {
+	/* 2nd arg is hms object, add it */
+	ans.hour += b.hour;
+	ans.min += b.min;
+	ans.sec += b.sec;
+    } else {
+	/* 2nd arg is not hms, add scalar hours */
+	ans.hour += b;
+    }
+
+    /* return normalized result */
+    ans = fixhms(ans);
+    return ans;
+}
+
+
+define hms_neg(a)
+{
+    local obj hms ans;		/* return value */
+
+    /* negate argument */
+    if (istype(a, ans)) {
+	/* 1st arg is hms object, load it */
+	ans.hour = -a.hour;
+	ans.min = -a.min;
+	ans.sec = -a.sec;
+    } else {
+	/* 2nd arg is not hms, negate scalar hours */
+	ans.hour = -a;
+	ans.min = 0;
+	ans.sec = 0;
+    }
+
+    /* return normalized result */
+    ans = fixhms(ans);
+    return ans;
+}
+
+
+define hms_sub(a, b)
+{
+    local obj hms ans;		/* return value */
+
+    /* initalize value to 1st arg */
+    if (istype(a, ans)) {
+	/* 1st arg is hms object, load it */
+	ans.hour = a.hour;
+	ans.min = a.min;
+	ans.sec = a.sec;
+    } else {
+	/* 1st arg is not hms, assume scalar hours */
+	ans.hour = a;
+	ans.min = 0;
+	ans.sec = 0;
+    }
+
+    /* subtract value of 2nd arg */
+    if (istype(b, ans)) {
+	/* 2nd arg is hms object, subtract it */
+	ans.hour -= b.hour;
+	ans.min -= b.min;
+	ans.sec -= b.sec;
+    } else {
+	/* 2nd arg is not hms, subtract scalar hours */
+	ans.hour -= b;
+    }
+
+    /* return normalized result */
+    ans = fixhms(ans);
+    return ans;
+}
+
+
+define hms_mul(a, b)
+{
+    local obj hms ans;		/* return value */
+
+    /* hms object multiplication */
+    if (istype(a, ans) && istype(b, ans)) {
+	ans.hour = hms_abs(a) * hms_abs(b);
+	ans.min = 0;
+	ans.sec = 0;
+
+    /* scalar multiplication */
+    } else if (istype(a, ans)) {
+	ans.hour = a.hour * b;
+	ans.min = a.min * b;
+	ans.sec = a.sec * b;
+    } else {
+	ans.hour = b.hour * a;
+	ans.min = b.min * a;
+	ans.sec = b.sec * a;
+    }
+
+    /* return normalized result */
+    ans = fixhms(ans);
+    return ans;
+}
+
+
+define hms_print(a)
+{
+    local obj hms ans;		/* temp object for hms type testing */
+
+    /* firewall - arg must be a hms object */
+    if (! istype(a, ans)) {
+	quit "hms_print called with non hms object";
+    }
+
+    /* print in hms form */
+    print a.hour : ':' : a.min : ':' : a.sec :;
+}
+
+
+define hms_abs(a)
+{
+    local obj hms ans;		/* temp object for hms type testing */
+    local hour;			/* return scalar value */
+
+    /* firewall - just absolute value non hms objects */
+    if (! istype(a, ans)) {
+    	return abs(a);
+    }
+
+    /* compute hours */
+    hour = a.hour + a.min / 60 + a.sec / 3600;
+
+    /* return hours */
+    return hour;
+}
+
+
+define hms_norm(a)
+{
+    local obj hms ans;		/* temp object for hms type testing */
+    local hour;			/* hours */
+
+    /* firewall - arg must be a hms object */
+    if (! istype(a, ans)) {
+	quit "hms_norm called with non hms object";
+    }
+
+    /* square hours (norm is the square of absolute value */
+    hour = hms_abs(a);
+
+    /* return hours */
+    return hour*hour;
+}
+
+
+define hms_test(a)
+{
+    local obj hms ans;		/* temp value */
+
+    /* firewall - arg must be a hms object */
+    if (! istype(a, ans)) {
+	quit "hms_test called with non hms object";
+    }
+
+    /* return false of non-zero */
+    ans = fixhms(a);
+    if (ans.hour == 0 && ans.min == 0 && ans.sec == 0) {
+	/* false */
+	return 0;
+    }
+    /* true */
+    return 1;
+}
+
+
+define hms_int(a)
+{
+    local obj hms ans;		/* return value */
+
+    /* firewall - arg must be a hms object */
+    if (! istype(a, ans)) {
+	quit "hms_int called with non hms object";
+    }
+
+    /* normalize the argument */
+    ans = fixhms(a);
+
+    /* truncate to the nearest second */
+    ans.sec = int(ans.sec);
+
+    /* return value to the nearest second */
+    return ans;
+}
+
+
+define hms_frac(a)
+{
+    local obj hms ans;		/* return value */
+
+    /* firewall - arg must be a hms object */
+    if (! istype(a, ans)) {
+	quit "hms_frac called with non hms object";
+    }
+
+    /* normalize the argument */
+    ans = fixhms(a);
+
+    /* remove all but fractional seconds */
+    ans.hour = 0;
+    ans.min = 0;
+    ans.sec = frac(ans.sec);
+
+    /* return value to the second fraction */
+    return ans;
+}
+
+
+define hms_rel(a,b)
+{
+    local abs_a, abs_b;		/* scalars of the arguments */
+
+    /* compute scalars of the arguments */
+    abs_a = hms_abs(a);
+    abs_b = hms_abs(b);
+
+    /* return the comparison */
+    return cmp(abs_a, abs_b);
+}
+
+
+define hms_cmp(a,b)
+{
+    local abs_a, abs_b;		/* scalars of the arguments */
+
+    /* compute scalars of the arguments */
+    abs_a = hms_abs(a);
+    abs_b = hms_abs(b);
+
+    /* return the equality comparison */
+    return (abs_a == abs_b);
+}
+
+
+define hms_inc(a)
+{
+    local obj hms ans;		/* return value */
+
+    /* increment a hms object */
+    if (istype(a, ans)) {
+	ans = a;
+	++ans.sec;
+
+	/* return normalized result */
+	ans = fixhms(ans);
+	return ans;
+    }
+
+    /* increment a scalar */
+    return a+1;
+}
+
+
+define hms_dec(a)
+{
+    local obj hms ans;		/* return value */
+
+    /* decrement a hms object */
+    if (istype(a, ans)) {
+	ans = a;
+	--ans.sec;
+
+	/* return normalized result */
+	ans = fixhms(ans);
+	return ans;
+    }
+
+    /* decrement a scalar */
+    return a-1;
+}
+
+
+define fixhms(a)
+{
+    local obj hms ans;		/* temp value */
+
+    /* firewall */
+    if (! istype(a, ans)) {
+	quit "attempt to fix a non hms object";
+    }
+
+    /* force minutes to be intergral */
+    a.min += frac(a.hour) * 60;
+    a.hour = int(a.hour);
+
+    /* force hours to be intergral */
+    a.sec += frac(a.min) * 60;
+    a.min = int(a.min);
+
+    /* carry excess seconds into minutes */
+    a.min += a.sec // 60;
+    a.sec %= 60;
+
+    /* carry excess minutes into hours */
+    a.hour += a.min // 60;
+    a.min %= 60;
+
+    /* round hours by day */
+    a.hour %= 24;
+
+    /* return normalized result */
+    return a;
+}
+
+if (config("resource_debug") & 3) {
+    print "obj hms {hour, min, sec} defined";
+}

cal/intfile.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.5 $
- * @(#) $Id: intfile.cal,v 29.5 2001/04/10 22:09:34 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: intfile.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/intfile.cal,v $
  *
  * Under source code control:   2001/03/31 08:13:11

cal/linear.cal

@@ -0,0 +1,56 @@
+/*
+ * linear - perform a simple two point 2D linear interpolation
+ *
+ * Copyright (C) 2005-2007  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: linear.cal,v 30.2 2007/03/17 05:57:42 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/linear.cal,v $
+ *
+ * Under source code control:	2005/12/12 06:41:50
+ * File existed as early as:	2005
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+/*
+ * linear - perform a simple two point 2D linear interpolation
+ *
+ * given:
+ *	x0, y0		first known point on the line
+ *	x1, y1		second knonw point on the line
+ *	x		a given point to interpolate on
+ *
+ * returns:
+ *	y such that (x,y) is on the line defined by (x0,y0) and (x1,y1)
+ *
+ * NOTE: The line cannot be vertical.  So x0 != y0.
+ */
+define linear(x0, y0, x1, y1, x)
+{
+    /* firewall */
+    if (!isnum(x0) || ! isnum(y0) || !isnum(x1) || ! isnum(y1) || !isnum(x)) {
+	quit "non-numeric argument passed to linear";
+    }
+    if (x0 == x1) {
+	quit "linear given a line with an infinite slope";
+    }
+
+    /* return y = y0 + (delta_Y/delta_X) * (x - x0) */
+    return y0 + (((y1-y0)/(x1-x0)) * (x - x0));
+}

cal/lucas.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: lucas.cal,v 29.3 2001/03/31 13:31:34 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: lucas.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/lucas.cal,v $
  *
  * Under source code control:	1990/05/03 16:49:51
@@ -28,6 +28,16 @@
  * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
+/*
+ * NOTE: This is a standard calc resource file.  For information on calc see:
+ *
+ *	http://www.isthe.com/chongo/tech/comp/calc/index.html
+ *
+ * To obtain your own copy of calc, see:
+ *
+ *	http://www.isthe.com/chongo/tech/comp/calc/calc-download.html
+ */
+
 /*
  * HISTORICAL NOTE:
  *
@@ -52,12 +62,19 @@
  *
  * At the time of discovery, this was the largest known twin prime pair.
  *
+ * See:
+ *
+ *	http://www.isthe.com/chongo/tech/math/prime/amdahl6.html
+ *
+ * for more information on the Amdahl 6 group.
+ *
  * NOTE: Both largest known and largest known twin prime records have been
  *	 broken.  Rather than update this file each time, I'll just
  *	 congratulate the finders and encourage others to try for
  *	 larger finds.	Records were made to be broken afterall!
- *
- * ON GAINING A WORLD RECORD:
+ */
+
+/* ON GAINING A WORLD RECORD:
  *
  * The routines in calc were designed to be portable, and to work on
  * numbers of 'sane' size.  The Amdahl 6 team used a 'ultra-high speed
@@ -73,7 +90,7 @@
  *
  *	test numbers of the form h*2^n-1
  *	fix a value of n and vary the value h
- *	n mod 128 == 0
+ *	n mod 2^x == 0  for some value of x, say > 7 or more
  *	h*2^n-1 is not divisible by any small prime < 2^40
  *	0 < h < 2^39
  *	h*2^n+1 is not divisible by any small prime < 2^40

cal/lucas_chk.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: lucas_chk.cal,v 29.3 2001/03/31 13:31:34 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: lucas_chk.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/lucas_chk.cal,v $
  *
  * Under source code control:	1991/01/11 05:41:43

cal/lucas_tbl.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: lucas_tbl.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: lucas_tbl.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/lucas_tbl.cal,v $
  *
  * Under source code control:	1991/01/26 02:43:43

cal/mersenne.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: mersenne.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: mersenne.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/mersenne.cal,v $
  *
  * Under source code control:	1991/05/22 21:56:36

cal/mfactor.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: mfactor.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: mfactor.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/mfactor.cal,v $
  *
  * Under source code control:	1996/07/06 06:09:40
@@ -261,7 +261,7 @@ define mfactor(n, start_k, rept_loop, p_elim)
 	} else {
 		/* report this loop */
 		printf("at 2*%d*%d+1, cpu: %f\n",
-			(q-1)/(2*n), n, runtime());
+			(q-1)/(2*n), n, usertime());
 		fflush(files(1));
 		loop = 0;
 	}
@@ -274,7 +274,7 @@ define mfactor(n, start_k, rept_loop, p_elim)
 		if (rept_loop <= ++loop) {
 			/* report this loop */
 			printf("at 2*%d*%d+1, cpu: %f\n",
-				(q-1)/(2*n), n, runtime());
+				(q-1)/(2*n), n, usertime());
 			fflush(files(1));
 			loop = 0;
 		}

cal/mod.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: mod.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: mod.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/mod.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:34

cal/natnumset.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: natnumset.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: natnumset.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/natnumset.cal,v $
  *
  * Under source code control:	1997/09/07 23:53:51
@@ -471,7 +471,7 @@ define set_plus(a) = set_sum(a);
 define interval(a, b)
 {
 	local i, j, s;
-	static tail = str("\0\1\3\7\17\37\77\177\377");
+	static tail = "\0\1\3\7\17\37\77\177\377";
 
 	if (!isint(a) || !isint(b))
 		quit "Non-integer argument for interval";

cal/pell.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: pell.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: pell.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/pell.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:34

cal/pi.cal

@@ -1,7 +1,7 @@
 /*
  * pi - various routines to calculate pi
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 1999-2004  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: pi.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: pi.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/pi.cal,v $
  *
  * Under source code control:	1991/05/22 21:56:37
@@ -61,7 +61,7 @@ define qpi(epsilon)
 	yn = sqrt2 - 1;
 	an = 6 - 4 * sqrt2;
 	tn = 2;
-	for (count = 0; count < niter; count++) {
+	for (count = 0; count < niter; ++count) {
 		ym = yn;
 		am = an;
 		tn *= 4;
@@ -104,7 +104,7 @@ define piforever()
 		* Next approximation
 		*/
 		p = k * k;
-		q = k + k++;
+		q = k + ++k;
 
 		a2 = a;
 		b2 = b;

cal/pix.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: pix.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: pix.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/pix.cal,v $
  *
  * Under source code control:	1996/07/09 03:14:14

cal/pollard.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: pollard.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: pollard.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/pollard.cal,v $
  *
  * Under source code control:	1991/05/22 21:56:37

cal/poly.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: poly.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: poly.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/poly.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:35

cal/prompt.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: prompt.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: prompt.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/prompt.cal,v $
  *
  * Under source code control:	1995/12/18 04:43:25
@@ -101,7 +101,7 @@ define adder() {
 	}
 }
 
-global x;
+global prompt_x;
 
 define showvalues(str) {
 	local s;
@@ -109,8 +109,8 @@ define showvalues(str) {
 		s = prompt("? ");
 		if (s == "end")
 			break;
-		x = eval(s);
-		if (!isnum(x)) {
+		prompt_x = eval(s);
+		if (!isnum(prompt_x)) {
 			print "Please enter a number";
 			continue;
 		}

cal/psqrt.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: psqrt.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: psqrt.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/psqrt.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:35

cal/qtime.cal

@@ -18,10 +18,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.4 $
- * @(#) $Id: qtime.cal,v 29.4 2000/12/18 10:18:40 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: qtime.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/qtime.cal,v $
  *
  * Under source code control:	1999/10/13 04:10:33

cal/quat.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: quat.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: quat.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/quat.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:35

cal/randbitrun.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: randbitrun.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: randbitrun.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/randbitrun.cal,v $
  *
  * Under source code control:	1995/02/13 03:43:11

cal/randmprime.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: randmprime.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: randmprime.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/randmprime.cal,v $
  *
  * Under source code control:	1994/03/14 23:11:21
@@ -88,8 +88,8 @@ randmprime(bits, seed, dbg)
      * loop until we find a prime
      */
     if (dbg >= 1) {
-	start = runtime();
-	init = runtime();
+	start = usertime();
+	init = usertime();
 	plush = 0;
 	print "DEBUG1: testing (h+" : plush : ")*2^" : n : "-1";
     }
@@ -97,7 +97,7 @@ randmprime(bits, seed, dbg)
 
 	/* bump h, and n if needed */
 	if (dbg >= 2) {
-	    stop = runtime();
+	    stop = usertime();
 	    print "DEBUG2: last test:", stop-start, "	total time:", stop-init;
 	}
 	if (dbg >= 1) {
@@ -116,7 +116,7 @@ randmprime(bits, seed, dbg)
 
     /* found a prime */
     if (dbg >= 2) {
-	stop = runtime();
+	stop = usertime();
 	print "DEBUG2: last test:", stop-start, "   total time:", stop-init;
 	print "DEBUG3: " : h : "*2^" : n : "-1 is prime";
     }

cal/randombitrun.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: randombitrun.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: randombitrun.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/randombitrun.cal,v $
  *
  * Under source code control:	1995/02/13 03:43:11

cal/randomrun.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: randomrun.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: randomrun.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/randomrun.cal,v $
  *
  * Under source code control:	1997/02/19 03:35:59

cal/randrun.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: randrun.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: randrun.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/randrun.cal,v $
  *
  * Under source code control:	1995/02/12 20:00:06

cal/repeat.cal

@@ -0,0 +1,53 @@
+/*
+ * repeat - return the value of a repeated set of digits
+ *
+ * Copyright (C) 2003  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: repeat.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/repeat.cal,v $
+ *
+ * Under source code control:	2003/01/05 00:00:01
+ * File existed as early as:	2003
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+/*
+ * repeat - return the value of a repeated set of digits
+ *
+ * usage:
+ *	repeat(digit_set, repeat_count)
+ */
+define repeat(digit_set, repeat_count)
+{
+    local digit_count;	/* digits in the digit_set */
+
+    /* firewall */
+    if (!isint(digit_set) || digit_set <= 0) {
+	quit "digit set must be an integer > 0";
+    }
+    if (!isint(repeat_count) || repeat_count <= 0) {
+	quit "repeat count must be an integer > 0";
+    }
+
+    /* return repeated set of digits */
+    digit_count = digits(digit_set);
+    return digit_set * (10^(digit_count*repeat_count)-1) / (10^digit_count-1);
+}

cal/screen.cal

@@ -0,0 +1,61 @@
+/*
+ * screen - ANSI control sequences
+ *
+ * This file was created by Ernest Bowen <ebowen at une dot edu dot au>.
+ *
+ * This code has been placed in the public domain.  Please do not
+ * copyright this code.
+ *
+ * ERNEST BOWEN DISCLAIMS ALL WARRANTIES WITH  REGARD  TO
+ * THIS	 SOFTWARE,  INCLUDING  ALL IMPLIED WARRANTIES OF MER-
+ * CHANTABILITY AND FITNESS.  IN NO EVENT SHALL	 LANDON	 CURT
+ * NOLL	 BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM  LOSS  OF
+ * USE,	 DATA  OR  PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR  IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: screen.cal,v 30.2 2007/03/16 11:09:54 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/screen.cal,v $
+ *
+ * This file is not covered under version 2.1 of the GNU LGPL.
+ *
+ * Under source code control:	2006/03/08 05:54:09
+ * File existed as early as:	2006
+ */
+
+up = CUU ="\e[A";
+down = CUD = "\e[B}";
+forward = CUF = "\e[C";
+back = CUB = "\e[D";
+save = SCP = "\e[s";
+restore = RCP = "\e[u";
+cls = "\e[2J";
+home = "\e[F";
+eraseline = "\e[K";
+off = "\e[0m";
+bold = "\e[1m";
+faint = "\e[2m";
+italic = "\e[3m";
+blink = "\e[5m";
+rapidblink = "\e[6m";
+reverse = "\e[7m";
+concealed = "\e[8m";
+/* Lowercase indicates foreground, uppercase background" */
+black = "\e[30m";
+red = "\e[31m";
+green = "\e[32m";
+yellow = "\e[33m";
+blue = "\e[34m";
+magenta = "\e[35m";
+cyan = "\e[36m";
+white = "\e[37m";
+Black = "\e[40m";
+Red = "\e[41m";
+Green = "\e[42m";
+Yellow = "\e[43m";
+Blue = "\e[44m";
+Magenta = "\e[45m";
+Cyan = "\e[46m";
+White = "\e[47m";

cal/seedrandom.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: seedrandom.cal,v 29.3 2001/03/31 13:31:34 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: seedrandom.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/seedrandom.cal,v $
  *
  * Under source code control:	1996/01/01 08:21:00

cal/set8700.cal

@@ -0,0 +1,77 @@
+/*
+ * set8700 - environment for dotest line tests for the 8700 set of regress.cal
+ *
+ * Copyright (C) 2006  Ernest Bowen and Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: set8700.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/set8700.cal,v $
+ *
+ * Under source code control:	2006/05/20 14:10:11
+ * File existed as early as:	2006
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+/*
+ * setup global variables for dotest() to use with set8700.set
+ */
+
+global set8700_A;
+global set8700_B;
+global set8700_M;
+global set8700_M1;
+global set8700_M2;
+global set8700_L;
+global set8700_L1;
+global set8700_L2;
+global set8700_O;
+global set8700_P;
+global set8700_P1;
+global set8700_P2;
+global set8700_Q;
+global set8700_R;
+global set8700_S;
+global set8700_X;
+global set8700_Y;
+global set8700_x;
+global set8700_y;
+
+define set8700_getA1() = set8700_A;
+
+define set8700_getA2() { return set8700_A; }
+
+define set8700_getvar() {local a = 42; protect(a,256); return a;}
+
+define set8700_f(set8700_x) = set8700_x^2;
+
+define set8700_g(set8700_x)
+{
+    if (isodd(set8700_x)) protect(set8700_x, 256);
+    return set8700_x;
+}
+
+obj set8700_point {
+	set8700_x, set8700_y, set8700_z
+}
+
+global mat set8700_c[] = { 1, 2+3i, -5+4i, 5i+6, -7i };
+
+global mat set8700_e[] = { 0, 1, 0, 0, 2, -3/2, 2, -1/2,
+			   -3, 0.5, -1.0, 0.5, 1.0, 0.0, 0.0, 0.0 };

cal/set8700.line

@@ -0,0 +1,429 @@
+##
+## set8700 - dotest line tests for the 8700 set of regress.cal
+##
+## Copyright (C) 2006  Ernest Bowen and Landon Curt Noll
+##
+## Calc is open software; you can redistribute it and/or modify it under
+## the terms of the version 2.1 of the GNU Lesser General Public License
+## as published by the Free Software Foundation.
+##
+## Calc is distributed in the hope that it will be useful, but WITHOUT
+## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+## or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+## Public License for more details.
+##
+## A copy of version 2.1 of the GNU Lesser General Public License is
+## distributed with calc under the filename COPYING-LGPL.  You should have
+## received a copy with calc; if not, write to Free Software Foundation, Inc.
+## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+##
+## @(#) $Revision: 30.1 $
+## @(#) $Id: set8700.line,v 30.1 2007/03/16 11:09:54 chongo Exp $
+## @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/set8700.line,v $
+##
+## Under source code control:	2006/05/20 14:10:11
+## File existed as early as:	2006
+##
+## chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+## Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+
+
+strcpy("", "") == ""
+strcpy("", "xyz") == ""
+strcpy("a", "xyz") == "x"
+strcpy("ab", "xyz") == "xy"
+strcpy("abc", "xyz") == "xyz"
+strcpy("abcd", "xyz") == "xyz\0"  ## Result will print as "xyz"
+strcpy("abcde", "xyz") == "xyz\0e"
+strcpy("abcdef", "xyz") == "xyz\0ef"
+strcpy("abcdef", "x\0z") == "x\0z\0ef" ## Note z is copied
+strcpy("abc", "") == "\0bc"
+
+strncpy("abcdef", "xyz", 0) == "abcdef" ## No characters copied
+strncpy("abcdef", "xyz", 1) == "xbcdef" ## One character copied, no '\0'
+strncpy("abcdef", "xyz", 2) == "xycdef"
+strncpy("abcdef", "xyz", 3) == "xyzdef"
+strncpy("abcdef", "xyz", 4) == "xyz\0ef"
+strncpy("abcdef", "xyz", 5) == "xyz\0\0f" ## Two nulls as in C
+strncpy("abcdef", "xyz", 6) == "xyz\0\0\0"
+strncpy("abcdef", "xyz", 7) == "xyz\0\0\0" ## Size of first string unchanged
+strncpy("a\0cdef", "\0yz", 4) == "\0yz\0ef"
+strncpy("ab", "xyz", 3) == "xy"
+
+strcmp("", "") == 0
+strcmp("", "a") == -1
+strcmp("\n", "\n") == 0
+strcmp("\0", "") == 1		## '\0' treated like other characters
+strcmp("ab", "") == 1
+strcmp("ab", "a") == 1
+strcmp("ab", "ab") == 0
+strcmp("ab", "abc") == -1
+strcmp("abc", "abb") == 1
+strcmp("abc", "abc") == 0
+strcmp("abc", "abd") == -1
+strcmp("abc\0", "abc") == 1
+
+strncmp("abc", "xyz", 0) == 0
+strncmp("abc", "xyz", 1) == -1
+strncmp("abc", "", 1) == 1
+strncmp("abc", "a", 1) == 0
+strncmp("", "", 2) == 0
+strncmp("a", "a", 2) == 0
+strncmp("a", "b", 2) == -1
+strncmp("ab", "ab", 2) == 0
+strncmp("ab", "ac", 2) == -1
+strncmp("\0ac", "\0b", 2) == -1
+strncmp("ab", "abc", 2) == 0
+strncmp("abc", "abd", 2) == 0
+strncmp("a", "a\0", 2) == -1
+strncmp("a", "a", 3) == 0
+strncmp("abc", "abd", 3) == -1
+strncmp("\0\0\n", "\0\0\t", 3) == 1
+
+str("abc") == "abc"
+str("ab\0") == "ab"
+str("a\0c") == "a"
+str("\0bc") == ""
+
+size("") == 0
+size("a") == 1
+size("\0") == 1
+size("a\0") == 2
+size("a\0b") == 3
+
+strlen("\0") == 0
+strlen("a\0") == 1
+strlen("a\0b") == 1
+
+0 * "abc" == ""
+1 * "abc" == "abc"
+2 * "abc" == "abcabc"
+3 * "abc" == "abcabcabc"
+1 * "" == ""
+-1 * "abc" == "cba"
+-2 * "abc" == "cbacba"
+"abc" + "xyz" == "abcxyz"
+"abc" - "xyz" == "abczyx"
+
+
+substr("abcd",0,0) == ""
+substr("abcd",0,1) == "a"
+substr("abcd",0,2) == "ab"
+substr("abcd",1,0) == ""
+substr("abcd",1,1) == "a"
+substr("abcd",1,2) == "ab"
+substr("abcd",2,0) == ""
+substr("abcd",2,1) == "b"
+substr("abcd",2,2) == "bc";
+substr("abcd",2,3) == "bcd";
+substr("abcd",2,4) == "bcd";
+substr("abcd",2,5) == "bcd"; ## substr stops at end of string
+substr("abcd",4,0) == ""
+substr("abcd",4,1) == "d"
+substr("abcd",4,2) == "d"
+substr("abcd",4,3) == "d"
+substr("abcd",5,0) == ""
+substr("abcd",5,1) == ""
+substr("a\0c\0",2,2) == "\0c"  ## '\0' treated like other characters
+substr("a\0c\0",2,3) == "\0c\0"
+
+#"" == 0	## # operator counts number of bits
+#"\0" == 0
+# "a" == 3
+   #	  "ab" == 6	## white space ignored
+# "abc" == 10
+# 27 == 4
+# 0b1010111011 == 7
+
+7 # 9 == 2		## 7 # 9 = abs(7 - 9)
+3/4 # 2/3 == 1/12
+
+a = 5, a #= 2, a == 3
+a #= 4, a == 1
+
+## Binary # operator not defined for strings
+
+protect(set8700_A) == 0
+## Testing with one lvalue
+isnull(protect(set8700_A,65))
+protect(set8700_A) == 65
+isnull(protect(set8700_A, -1))
+protect(set8700_A) == 64
+protect(set8700_A,-2), protect(set8700_A) == 64
+protect(set8700_A,5), protect(set8700_A) == 69
+protect(set8700_A,-4), protect(set8700_A) == 65
+protect(set8700_A,0), protect(set8700_A) == 0
+protect(set8700_A,1234), protect(set8700_A) == 1234
+protect(set8700_A,-1234), protect(set8700_A) == 0
+protect(set8700_A,65535), protect(set8700_A) == 65535
+protect(set8700_A,-65535), protect(set8700_A) == 0
+
+## Simple assignments
+set8700_A = 42, protect(set8700_A,1024), set8700_B = set8700_A, protect(set8700_B) == 1024
+set8700_A = 6 * 7, protect(set8700_A) == 1024
+set8700_A == set8700_B
+
+## Testing matrix protectioon
+set8700_A = mat [3] = {1, 2, list(3,4)}; 1
+protect(set8700_A, 65, 1), protect(set8700_A) == 1089
+protect(set8700_A[0]) == 65
+protect(set8700_A[2]) == 65
+protect(set8700_A[2][1]) == 0
+protect(set8700_A, 65, 2), protect(set8700_A[2][1]) == 65
+protect(set8700_A,-1024), protect(set8700_A) == 65
+protect(set8700_A, -1, 1), protect(set8700_A) == 64
+protect(set8700_A[1]) == 64
+protect(set8700_A[2]) == 64
+protect(set8700_A[2][0]) == 65
+protect(set8700_A,0), protect(set8700_A) == 0
+protect(set8700_A[1]) == 64
+protect(set8700_A, 0, 2), protect(set8700_A) == 0
+protect(set8700_A[1]) == 0
+protect(set8700_A[2][1]) == 0
+protect(set8700_A,1024, 2), protect(set8700_A) == 1024
+protect(set8700_A[2]) == 1024
+protect(set8700_A[2][0], 512), protect(set8700_A[2][0]) == 1536
+
+## Testing simple assignment of matrix
+set8700_B = set8700_A, protect(set8700_B) == 1024	## protect(set8700_A) copied
+protect(set8700_B[2]) == 1024		## protect(set8700_A[2]) copied
+protect(set8700_B[2][0]) == 1536	## protect(set8700_A[2][0]) copied
+
+## copying matrix to list
+set8700_B = list(5,6,7), protect(set8700_B) == 1024
+protect(set8700_B[0]) == 0
+protect(set8700_B[2]) == 0
+protect(set8700_A,0), protect(set8700_A) == 0
+copy(set8700_A,set8700_B), set8700_B[0] == 1 && set8700_B[1] == 2
+set8700_B[2] == list(3,4)
+protect(set8700_B) == 1024		## protect(set8700_A) not copied
+protect(set8700_B[0]) == 1024		## protect(set8700_A[0]) copied
+protect(set8700_B[2][0]) == 1536	## protect(set8700_A[2][0]) copied
+
+## copying matrix to matrix
+set8700_B = mat[3], protect(set8700_B) == 1024
+protect(set8700_B[2]) == 0
+copy(set8700_A,set8700_B), set8700_B[0] == 1 && set8700_B[1] == 2
+set8700_B[2] == list(3,4)
+protect(set8700_B) == 1024		## protect(set8700_A) not copied
+protect(set8700_B[0]) == 1024		## protect(set8700_A[0]) copied
+protect(set8700_B[2][0]) == 1536	## protect(set8700_A[2][0]) copied
+
+## Testing list protection
+set8700_A = list(1, 2, list(3,4)), 1
+protect(set8700_A,1024, 2), protect(set8700_A) == 1024
+protect(set8700_A[2]) == 1024
+protect(set8700_A[2][0], 512), protect(set8700_A[2][0]) == 1536
+
+## Simple assignment of list
+set8700_B = set8700_A, protect(set8700_B) == 1024	## protect(set8700_A) copied
+protect(set8700_B[2]) == 1024		## protect(set8700_A[2]) copied
+protect(set8700_B[2][0]) == 1536	## protect(set8700_A[2][0]) copied
+
+## Copying list to list
+set8700_B = list(5,6,7), protect(set8700_B) == 1024
+protect(set8700_B[2]) == 0
+copy(set8700_A,set8700_B), set8700_B[0] == 1 && set8700_B[1] == 2
+set8700_B[2] == list(3,4)
+protect(set8700_B) == 1024		## protect(set8700_A) not copied
+protect(set8700_B[0]) == 1024		## protect(set8700_A[0]) copied
+protect(set8700_B[2][0]) == 1536	## protect(set8700_A[2][0]) copied
+
+## Copying list to matrix
+set8700_B = mat[3], protect(set8700_B) == 1024
+protect(set8700_B[2]) == 0
+copy(set8700_A,set8700_B), set8700_B[0] == 1 && set8700_B[1] == 2
+set8700_B[2] == list(3,4)
+protect(set8700_B) == 1024
+protect(set8700_B[0]) == 1024		## protect(set8700_A[0]) copied
+protect(set8700_B[2][0]) == 1536	## protect(set8700_A[2][0]) copied
+
+## Protecting one element of a list
+set8700_A = list(1,4,3,2), protect(set8700_A[1]) == 0
+protect(set8700_A[1], 1024), protect(set8700_A[1]) == 1024
+
+## Testing sort
+set8700_A = sort(set8700_A), set8700_A == list(1,2,3,4)
+protect(set8700_A[1]) == 0
+protect(set8700_A[3]) == 1024		## status of 4
+
+## Testings reverse
+set8700_A = reverse(set8700_A), set8700_A == list(4,3,2,1)
+protect(set8700_A[0]) == 1024		## status of 4
+
+## Testing swap
+swap(set8700_A[0], set8700_A[1]), set8700_A == list(3,4,2,1)
+protect(set8700_A[0]) == 0		## status moved
+protect(set8700_A[1]) == 1024		## 4 retains protection
+
+## Testing list with protected list argument
+protect(set8700_A, 0), protect(set8700_A) == 0
+protect(set8700_A, 512), protect(set8700_A) == 512
+protect(set8700_A[1]) == 1024
+set8700_L = list(1,set8700_A,3), protect(set8700_L) == 0
+protect(set8700_L[0]) == 0
+protect(set8700_L[1]) == 512		## protect(set8700_A) copied
+protect(set8700_L[1][1]) == 1024	## protect(set8700_A[1]) copied
+
+## Testing list with "intialization"
+set8700_L = list(1,2,3), protect(set8700_L) == 0
+protect(set8700_L[0]) | protect(set8700_L[1]) | protect(set8700_L[2]) == 0	## All zero
+set8700_L = {1,set8700_A}, set8700_L[1] == set8700_A
+protect(set8700_L[1]) == 512		## protect(set8700_A) copied
+protect(set8700_L[1][1]) == 1024	## protect(set8700_A[1]) copied
+set8700_L[1] = 2, protect(set8700_L[1]) == 512	## Not changed
+
+## Testing matrix with "initialization"
+set8700_M = mat[3] = {1,set8700_A}, protect(set8700_M) == 0
+protect(set8700_M[0]) == 0
+protect(set8700_M[1]) == 512		## protect(set8700_A) copied
+protect(set8700_M[2]) == 0
+protect(set8700_M[1][1]) == 1024	## protect(set8700_A[1]) copied
+
+## Testing push, pop, append, remove
+set8700_A = list(1,2), protect(set8700_A,0,1), protect(set8700_A[0]) == 0
+protect(set8700_A[0], 256), protect(set8700_A[0]) == 256
+protect(set8700_A[1]) == 0
+append(set8700_A, pop(set8700_A)), protect(set8700_A[0]) ==  0
+protect(set8700_A[1]) == 256
+push(set8700_A, remove(set8700_A)), protect(set8700_A[0]) == 256
+protect(set8700_A[1]) == 0
+
+## Testing operation-assignments
+set8700_A = 5, protect(set8700_A,1024), protect(set8700_A) == 1024
+protect(set8700_A, 1024), set8700_A = 7, protect(set8700_A) == 1024
+protect(set8700_A,1024), set8700_A += 2, protect(set8700_A) == 1024
+protect(set8700_A,1024), set8700_A *= 2, protect(set8700_A) == 1024
+protect(set8700_A,1024), set8700_A |= 2, protect(set8700_A) == 1024
+protect(set8700_A,1024), set8700_A &= 2, protect(set8700_A) == 1024
+protect(set8700_A,1024), set8700_A ^= 2, protect(set8700_A) == 1024
+
+protect(set8700_B,0), set8700_B = set8700_getA1(), protect(set8700_B) == 1024
+protect(set8700_B,0), set8700_B = set8700_getA2(), protect(set8700_B) == 1024
+set8700_B = set8700_getvar(), protect(set8700_B) == 1024 + 256
+
+set8700_x = 7,  protect(set8700_x) == 0
+protect(7,2) == error(10234)
+protect(set8700_x,2.5) == error(10235)
+protect(set8700_x,"abc") == error(10235)
+protect(set8700_x, 1e6) == error(10235)
+protect(set8700_x,1), (set8700_x = 2) == error(10366)
+(set8700_x = 3 + 4) == error(10366)
+
+protect(set8700_x,2), protect(set8700_x) == 3
+protect(set8700_x,-1), protect(set8700_x) == 2
+(set8700_x = 2) == error(10368)
+(set8700_x = 3 + 4) == 7
+protect(set8700_x,2), ++set8700_x == error(10379)
+set8700_x == 7
+--set8700_x == error(10382)
+set8700_x == 7
+set8700_x++ == error(10385)
+set8700_x == 7
+set8700_x-- == error(10388)
+
+protect(set8700_A,0), protect(set8700_A,16), 1
+set8700_A = "abcdef", protect(set8700_A) == 16		## No copy to set8700_A
+protect(set8700_B,0), set8700_B = "xyz", protect(set8700_B) == 0
+copy(set8700_B, set8700_A) == error(10226)
+set8700_A == "abcdef"				## set8700_A not changed
+protect(set8700_A,0), copy(set8700_B,set8700_A), set8700_A == "xyzdef"
+protect(set8700_B,128), protect(set8700_B) == 128	## No copy from set8700_B
+copy(set8700_B,set8700_A,,,3) == error(10225)
+set8700_A == "xyzdef"
+protect(set8700_B,0), copy(set8700_B,set8700_A,,,3), set8700_A == "xyzxyz"
+
+set8700_A = "abcdef", protect(set8700_A, 16), swap(set8700_A[0], set8700_A[5]) == error(10371)
+set8700_A == "abcdef"
+protect(set8700_A,0), isnull(swap(set8700_A[0], set8700_A[5]))
+set8700_A == "fbcdea"
+protect(set8700_A,2), ++set8700_A[0] == error(10377)
+--set8700_A[1] == error(10380)
+set8700_A[2]++ == error(10383)
+set8700_A[3]-- == error(10386)
+set8700_A == "fbcdea"
+protect(set8700_A,0), ++set8700_A[0] == 'g'
+--set8700_A[1] == 'a'
+set8700_A[2]++ == ord('c')
+set8700_A[3]-- == ord('d')
+set8700_A == "gadcea"
+
+protect(set8700_x,0), protect(set8700_y,0), protect(set8700_x,256), protect(set8700_y,512),1
+quomod(11,4,set8700_x,set8700_y), set8700_x == 2 && set8700_y == 3
+protect(set8700_x) == 256
+protect(set8700_y) == 512
+
+set8700_A = mat[3]; protect(set8700_A[0], 1024); protect(set8700_A[0]) == 1024
+set8700_x = 7, protect(set8700_x,0), protect(set8700_x, 512), 1
+set8700_A = {set8700_x,,set8700_x}, protect(set8700_A[0]) == 1536
+protect(set8700_A[1]) == 0
+protect(set8700_A[2]) == 512
+protect(set8700_A,16), protect(set8700_A) == 16		## No copy to
+set8700_A == (mat[3] = {7,0,7})
+set8700_A = {1,2,3}, errno() == 10390;
+set8700_A == (mat[3] = {7,0,7})
+
+protect(set8700_A,0), set8700_A = {1,2,3}, set8700_A == (mat[3] = {1,2,3})
+protect(set8700_A[1],1), protect(set8700_A[1]) == 1
+set8700_A = {4,5,6}, errno() == 10394
+set8700_A == (mat[3] = {4,2,6})
+modify(7, "set8700_f") == error(10405)
+set8700_A = list(2,3,5), modify(set8700_A, 7) == error(10406)
+protect(set8700_A,2), modify(set8700_A, "set8700_f") == error(10407)
+protect(set8700_A,0), modify(set8700_A, "h") == error(10408)
+set8700_B = 42, protect(set8700_B,0), modify(set8700_B, "set8700_f") == error(10409)
+set8700_A == list(2,3,5)		## set8700_A not affected by failures
+protect(set8700_A,0,1), modify(set8700_A, "set8700_f") == null()
+set8700_A == list(4,9,25)
+modify(set8700_A,"set8700_g") == null()
+protect(set8700_A[0]) == 0
+protect(set8700_A[1]) == 256 && protect(set8700_A[2]) == 256
+
+set8700_A = 0, protect(set8700_A,0), set8700_A = pop(2), set8700_A == error(10181)
+set8700_A = pop(list(1,2,3)), set8700_A == error(10181)
+set8700_B = set8700_A = pop(2), set8700_B == error(10181)
+set8700_A = 32, protect(set8700_A,8), (set8700_A = pop(2)) == error(10370)
+set8700_A == 32
+set8700_B = set8700_A = pop(2), set8700_B == error(10370)
+## Testing copying of protected elements and initialization
+set8700_M1 = mat[3], protect(set8700_M1,0), protect(set8700_M1[1],1), protect(set8700_M1[1]) == 1
+set8700_M2 = mat[3], protect(set8700_M2,0), protect(set8700_M2[2],4), protect(set8700_M2[2]) == 4
+set8700_L = list(set8700_M1, set8700_M2), protect(set8700_L[0][1]) == 1 && protect(set8700_L[1][2]) == 4
+set8700_L = {{1,2,3},{'a','b','c'}}, set8700_L[0] == (mat[3] = {1,0,3})
+set8700_L[1] == (mat[3] = {'a','b',0})
+set8700_M = mat[2], protect(set8700_M,0), set8700_M = {1,2,3,4}, set8700_M == (mat[2] = {1,2})
+set8700_x = 5, set8700_M = {set8700_x++, set8700_x++, set8700_x++, set8700_x++, set8700_x++}, set8700_M == (mat[2] = {5,6})
+set8700_x == 10		## All initialization terms evaluated
+set8700_S = "   ", set8700_S = {'a','b','c','d'}, set8700_S == "abc"
+
+set8700_P = obj set8700_point = {1,2,3,4}, set8700_P.set8700_x == 1 && set8700_P.set8700_y == 2 && set8700_P.set8700_z == 3
+protect(set8700_P,16), set8700_Q = set8700_P, set8700_Q = {5,6,7}, set8700_Q == set8700_P
+set8700_P == (obj set8700_point = {1,2,3})
+set8700_L = list(mat[1] = {set8700_P}), protect(set8700_L[0][0]) == 16
+set8700_L = {{{4,5,6}}}, set8700_L[0][0] == set8700_P
+protect(set8700_L,0,2), set8700_L = {{{4,5,6}}}, set8700_L[0][0] == (obj set8700_point = {4,5,6})
+
+## Testing quomod
+quomod(14,5,3,4) == error(10374)
+global set8700_a,set8700_b; quomod("abc", 4, set8700_a, set8700_b) == error(10375)
+quomod(14,5,set8700_a,set8700_b,0) == 1 && set8700_a == 2 && set8700_b == 4
+quomod(14,5,set8700_a,set8700_b,1) == 1 && set8700_a == 3 && set8700_b == -1
+quomod("abc",2,set8700_a,set8700_b) == error(10375)
+set8700_a = "abc"; quomod(14,5,set8700_a,set8700_b) == error(10375)
+set8700_a = null(); quomod(14,5,set8700_a,set8700_b,24) == 1; set8700_a == 3 && set8700_b == -1
+quomod(14,5,set8700_a,set8700_a) == error(10374)
+quomod(14,5,set8700_a,set8700_b,-1) == error(10375)
+protect(set8700_a,1); quomod(17,2,set8700_a,set8700_b) == error(10376)
+protect(set8700_a,0); quomod(17,2,set8700_a,set8700_b); set8700_a == 8 && set8700_b == 1
+set8700_p = &set8700_a, set8700_q = &set8700_b; quomod(14,5,*set8700_p,*set8700_q); *set8700_p == 2 && *set8700_q == 4
+
+## Testing estr
+base(1/3) == 10
+strcmp(estr(null()), "\"\"") == 0
+strcmp(estr(bernoulli(48)), "-5609403368997817686249127547/46410") == 0
+strcmp(estr(sin(3i)), "1001787492740990189897i/100000000000000000000") == 0
+base(10) == 1/3
+strcmp(estr("fizzbin"), "\"fizzbin\"") == 0
+strcmp(estr(set8700_c), "mat[5]={1,2+3i,-5+4i,6+5i,-7i}") == 0
+strcmp(estr(set8700_e), "mat[16]={0,1,0,0,2,-3/2,2,-1/2,-3,1/2,-1,1/2,1,0,0,0}") == 0
+strcmp(estr(list(2,3,5)), "list(2,3,5)") == 0

cal/solve.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: solve.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: solve.cal,v 30.2 2008/05/10 13:30:00 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/solve.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:37
@@ -47,7 +47,7 @@ define solve(low, high, epsilon)
 	if (abs(flow) < epsilon)
 		return low;
 	fhigh = f(high);
-	if (abs(flow) < epsilon)
+	if (abs(fhigh) < epsilon)
 		return high;
 	if (sgn(flow) == sgn(fhigh))
 		quit "Non-opposite signs";

cal/sumsq.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: sumsq.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: sumsq.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/sumsq.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:37

cal/sumtimes.cal

@@ -0,0 +1,186 @@
+/*
+ * sumtimes - runtimes evaluating sums & squares of large lists and mats
+ *
+ * Copyright (C) 2006  Ernest Bowen
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: sumtimes.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/sumtimes.cal,v $
+ *
+ * Under source code control:	2006/06/22 17:29
+ * File existed as early as:	2006
+ *
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+global sumtimes_t0, sumtimes_t1, sumtimes_t2, sumtimes_t3;
+global sumtimes_A, sumtimes_B;
+config("tilde", 0),;
+
+define timematsum(N) {
+    local n, s, p, ptop;
+
+    sumtimes_A = mat[N];
+
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+
+    ptop = &sumtimes_A[n-1];
+    sumtimes_t0 = usertime();
+    for (s = n = 0; n < N; n++) s += sumtimes_A[n];
+    sumtimes_t1 = usertime();
+    for (s = 0, p = &sumtimes_A[0]; p <= ptop; p++) s += *p;
+    sumtimes_t2 = usertime();
+    s = matsum(sumtimes_A);
+    sumtimes_t3 = usertime();
+
+    print "Matrix sum runtimes";
+    printf('\tStandard "for" loop:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+    printf('\t"For" loop using pointers:\t\t%.4f\n', sumtimes_t2 - sumtimes_t1);
+    printf('\tUsing builtin "matsum":\t\t%.4f\n', sumtimes_t3 - sumtimes_t2);
+}
+
+define timelistsum(N) {
+    local n, s;
+
+    sumtimes_A = makelist(N);
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+
+    sumtimes_t0 = usertime();
+    for (s = n = 0; n < N; n++) s += sumtimes_A[n];
+    sumtimes_t1 = usertime();
+    s = sum(sumtimes_A);
+    sumtimes_t2 = usertime();
+    print "List sum runtimes";
+    printf('\tStandard "for" loop:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+    printf('\tUsing builtin "sum":\t\t%.4f\n', sumtimes_t2 - sumtimes_t1);
+}
+
+
+define timematsort(N) {
+    local n;
+
+    sumtimes_A = mat[N];
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+    sumtimes_t0 = usertime();
+    sort(sumtimes_A);
+    sumtimes_t1 = usertime();
+    printf('\tMatrix sort runtime:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+}
+
+
+define timelistsort(N) {
+    local n;
+
+    sumtimes_A = makelist(N);
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+    sumtimes_t0 = usertime();
+    sort(sumtimes_A);
+    sumtimes_t1 = usertime();
+    printf('\tList sort runtime:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+}
+
+define timematreverse(N) {
+    local n;
+
+    sumtimes_A = mat[N];
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+    sumtimes_t0 = usertime();
+    reverse(sumtimes_A);
+    sumtimes_t1 = usertime();
+    printf('\tMatrix reverse runtime        %.4f\n', sumtimes_t1 - sumtimes_t0);
+}
+
+define timelistreverse(N) {
+    local n;
+
+    sumtimes_A = makelist(N);
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+    sumtimes_t0 = usertime();
+    reverse(sumtimes_A);
+    sumtimes_t1 = usertime();
+    printf('\tList reverse runtime:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+}
+
+define timematssq(N) {
+    local n, s, p, ptop;
+
+    sumtimes_A = mat[N];
+
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+
+    ptop = &sumtimes_A[n-1];
+    sumtimes_t0 = usertime();
+    for (s = n = 0; n < N; n++) s += sumtimes_A[n]^2;
+    sumtimes_t1 = usertime();
+    for (s = 0, p = &sumtimes_A[0]; p <= ptop; p++) s += (*p)^2;
+    sumtimes_t2 = usertime();
+
+    print "Matrix sum of squares runtimes";
+    printf('\tStandard "for" loop:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+    printf('\t"For" loop using pointers:\t\t%.4f\n', sumtimes_t2 - sumtimes_t1);
+}
+
+define timelistssq(N) {
+    local n, s;
+
+    sumtimes_A = makelist(N);
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(N);
+
+    sumtimes_t0 = usertime();
+    for (s = n = 0; n < N; n++) s += sumtimes_A[n]^2;
+    sumtimes_t1 = usertime();
+    s = ssq(sumtimes_A);
+    sumtimes_t2 = usertime();
+    print "List sum of squares runtimes";
+    printf('\tStandard "for" loop:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+    printf('\tUsing builtin "ssq":\t\t%.4f\n', sumtimes_t2 - sumtimes_t1);
+}
+
+define timehmean(N, M = 10) {
+    local n, s, v1, v2;
+
+    sumtimes_A = makelist(N);
+    for (n = 0; n < N; n++) sumtimes_A[n] = rand(1, M);
+
+    sumtimes_t0 = usertime();
+    for (s = n = 0; n < N; n++) s += 1/sumtimes_A[n];
+    v1 = N/s;
+    sumtimes_t1 = usertime();
+    v2 = hmean(sumtimes_A);
+    sumtimes_t2 = usertime();
+    print v1, v2;
+    print "List harmonic meanruntimes";
+    printf('\tStandard "for" loop:\t\t%.4f\n', sumtimes_t1 - sumtimes_t0);
+    printf('\tUsing builtin "hmean":\t\t%.4f\n', sumtimes_t2 - sumtimes_t1);
+}
+
+define doalltimes(N) {
+    timematsum(N);
+    print;
+    timelistsum(N);
+    print;
+    timematssq(N);
+    print;
+    timelistssq(N);
+    print;
+    timematsort(N);
+    timelistsort(N);
+    timematreverse(N);
+    timelistreverse(N);
+    print;
+}

cal/surd.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: surd.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: surd.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/surd.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:38

cal/test1700.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test1700.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test1700.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test1700.cal,v $
  *
  * Under source code control:	1994/03/14 23:12:51

cal/test2300.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test2300.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test2300.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test2300.cal,v $
  *
  * Under source code control:	1995/07/09 06:12:13

cal/test2600.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test2600.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: test2600.cal,v 30.2 2007/07/11 22:57:23 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test2600.cal,v $
  *
  * Under source code control:	1995/10/13 00:13:14
@@ -313,6 +313,102 @@ define testpower(str, n, b, eps, verbose)
 }
 
 
+define testpower2(str, n, eps, verbose)
+{
+	local i, a, c, m, min, max;
+	local b;
+	local num;
+	local c2;
+	local oldeps;
+
+	if (isnull(verbose)) verbose = 2;
+	if (verbose > 0) {
+		print str:":",:;
+	}
+	if (isnull(eps))
+		eps = epsilon();
+	oldeps = epsilon(eps);
+	epsilon(eps),;
+	if (!isnum(b))
+		quit "Second argument (exponent) to be a number";
+	min = 1000;
+	max = -1000;
+	for (i = 1; i <= n; i++) {
+		if (verbose > 2) print i,:;
+
+		/* real ^ real */
+		a = rand(1,1e20);
+		a = a / (int(a/2)+rand(1,1e20));
+		b = rand(1,1e20);
+		b = b / (int(b/2)+rand(1,1e20));
+		c = a ^ b;
+		c2 = power(a, b);
+		if (c != c2) {
+			m++;
+			if (verbose > 1) {
+				printf("*** real^real failure for a = %d\n", a);
+			}
+		}
+
+		/* complex ^ real */
+		a = rand(1,1e20);
+		a = a / (int(a/2)+rand(1,1e20));
+		b = rand(1,1e20);
+		b = b / (int(b/2)+rand(1,1e20));
+		c = (a*1i) ^ b;
+		c2 = power(a*1i, b);
+		if (c != c2) {
+			m++;
+			if (verbose > 1) {
+				printf("*** comp^real failure for a = %d\n", a);
+			}
+		}
+
+		/* real ^ complex */
+		a = rand(1,1e20);
+		a = a / (int(a/2)+rand(1,1e20));
+		b = rand(1,1e20);
+		b = b / (int(b/2)+rand(1,1e20));
+		c = a ^ (b*1i);
+		c2 = power(a, b*1i);
+		if (c != c2) {
+			m++;
+			if (verbose > 1) {
+				printf("*** real^comp failure for a = %d\n", a);
+			}
+		}
+
+		/* complex ^ complex */
+		a = rand(1,1e20);
+		a = a / (int(a/2)+rand(1,1e20));
+		b = rand(1,1e20);
+		b = b / (int(b/2)+rand(1,1e20));
+		c = (a*1i) ^ (b*1i);
+		c2 = power(a*1i, b*1i);
+		if (c != c2) {
+			m++;
+			if (verbose > 1) {
+				printf("*** comp^comp failure for a = %d\n", a);
+			}
+		}
+	}
+	epsilon(oldeps),;
+	if (verbose > 0) {
+		if (m) {
+			printf("*** %d error(s)\n", m);
+			printf("    %s: rem/eps min=%d, max=%d\n",
+			       str, min, max);
+		} else {
+			printf("no errors\n");
+		}
+	}
+	if (verbose > 1) {
+		printf("    %s: rem/eps min=%0.4d, max=%0.4d\n", str, min, max);
+	}
+	return m;
+}
+
+
 define cpow(a, b, eps)		/* Find rem/eps for power(a,b,eps) */
 {
 	local v, v1, c, n, d, h;
@@ -504,6 +600,7 @@ define test2600(verbose, tnum)
 		err += testsqrt(strcat(str(tnum++),": sqrt",str(i)), n*10,
 				ep, verbose);
 	}
+	err += testpower2(strcat(str(tnum++),": power"), n*4, ep, verbose);
 	if (verbose > 1) {
 		if (err) {
 			print "***", err, "error(s) found in test2600";

cal/test2700.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test2700.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test2700.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test2700.cal,v $
  *
  * Under source code control:	1995/11/01 22:52:25
@@ -41,8 +41,7 @@
  */
 
 
-global defaultverbose = 1;
-global err;
+defaultverbose = 1;
 
 define mknonnegreal() {
 	switch(rand(8)) {
@@ -89,11 +88,11 @@ define mkfrac() = rand(2) ? mkposfrac() : -mkposfrac();
 define mksquarereal() = mknonnegreal()^2;
 
 /*
- * XXX - Should be able to do better than the following.  For nonsquare
- * positive integer less than 1e6, could use
+ * We might be able to do better than the following.  For nonsquare
+ * positive integer less than 1e6, could use:
  *		 x = rand(1, 1000);
  *		 return rand(x^2 + 1, (x + 1)^2);
- * Maybe could do
+ * Maybe could do:
  *		do
  *			x = mkreal_2700();
  *		while

cal/test3100.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test3100.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test3100.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test3100.cal,v $
  *
  * Under source code control:	1995/11/28 11:56:57

cal/test3300.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test3300.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test3300.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test3300.cal,v $
  *
  * Under source code control:	1995/12/02 04:27:41
@@ -30,8 +30,7 @@
  */
 
 
-global defaultverbose = 1;	/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 define testi(str, n, N, verbose)
 {
@@ -82,9 +81,9 @@ define testr(str, n, N, verbose)
 	for (i = 0; i < n; i++)
 		for (j = 0; j < n; j++)
 			A[i,j] = rand(-(N^2), N^2)/rand(1, N);
-	t = runtime();
+	t = usertime();
 	d1 = det(A);
-	t = runtime() - t;
+	t = usertime() - t;
 	d2 = det(A^2);
 	if (d2 != d1^2) {
 		if (verbose > 0) {

cal/test3400.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test3400.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test3400.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test3400.cal,v $
  *
  * Under source code control:	1995/12/02 05:20:11
@@ -54,8 +54,7 @@
  */
 
 
-global defaultverbose = 1;	/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 global pi1k = pi(1e-1000);
 

cal/test3500.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test3500.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test3500.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test3500.cal,v $
  *
  * Under source code control:	1995/12/18 22:50:46
@@ -53,8 +53,7 @@
  */
 
 
-global defaultverbose = 1;	/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 define testfrem(x,y,verbose)
 {

cal/test4000.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test4000.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test4000.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test4000.cal,v $
  *
  * Under source code control:	1996/03/13 02:38:45
@@ -75,8 +75,7 @@
  */
 
 
-global defaultverbose = 1;	/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 /*
  * test defaults
@@ -146,7 +145,7 @@ define ptimes(str, N, n, count, skip, verbose)
 	mat A[n];
 	for (i = 0; i < n; i++)
 		A[i] = plen(N);
-	t = runtime();
+	t = usertime();
 	for (i = 0; i < n; i++) {
 		p = ptest(A[i], count, skip);
 		if (!p) {
@@ -160,7 +159,7 @@ define ptimes(str, N, n, count, skip, verbose)
 		if (m) {
 			printf("*** %d error(s)\n", m);
 		} else {
-			t = round(runtime() - t, 4);
+			t = round(usertime() - t, 4);
 			if (verbose > 1) {
 				printf("%d probable primes: time = %d\n", n, t);
 			} else {
@@ -195,7 +194,7 @@ define ctimes(str, N, n, count, skip, verbose)
 	mat A[n];
 	for (i = 0; i < n; i++)
 		A[i] = clen(N);
-	t = runtime();
+	t = usertime();
 	for (i = 0; i < n; i++) {
 		p = ptest(A[i], count, skip);
 		if (p) {
@@ -209,7 +208,7 @@ define ctimes(str, N, n, count, skip, verbose)
 		if (m) {
 			printf("*** %d error(s)\n", m);
 		} else {
-			t = round(runtime() - t, 4);
+			t = round(usertime() - t, 4);
 			if (verbose > 1) {
 				printf("%d probable primes: time = %d\n", n, t);
 			} else {
@@ -243,7 +242,7 @@ define crtimes(str, a, b, n, count, skip, verbose)
 		A[i] = rand(a,b);
 		P[i] = ptest(A[i], 20, 0);
 	}
-	t = runtime();
+	t = usertime();
 	for (i = 0; i < n; i++) {
 		p = ptest(A[i], count, skip);
 		if (p != P[i]) {
@@ -258,7 +257,7 @@ define crtimes(str, a, b, n, count, skip, verbose)
 		if (m) {
 			printf("*** %d error(s)?\n", m);
 		} else {
-			t = round(runtime() - t, 4);
+			t = round(usertime() - t, 4);
 			if (verbose > 1) {
 				printf("%d probable primes: time = %d\n", n, t);
 			} else {
@@ -296,16 +295,16 @@ define ntimes(str, N, n, count, skip, residue, modulus, verbose)
 	mat A[n];
 	for (i = 0; i < n; i++)
 		A[i] = rlen(N);
-	t = runtime();
+	t = usertime();
 	for (i = 0; i < n; i++) {
 		p = nextcand(A[i], count, skip, residue, modulus);
 	}
-	tnext = round(runtime() - t, 4);
-	t = runtime();
+	tnext = round(usertime() - t, 4);
+	t = usertime();
 	for (i = 0; i < n; i++) {
 		p = prevcand(A[i], count, skip, residue, modulus);
 	}
-	tprev = round(runtime() - t, 4);
+	tprev = round(usertime() - t, 4);
 	if (verbose > 0) {
 		printf("%d evaluations, nextcand: %d, prevcand: %d\n", n, tnext, tprev);
 	}

cal/test4100.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test4100.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test4100.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test4100.cal,v $
  *
  * Under source code control:	1996/03/13 03:53:22
@@ -70,18 +70,16 @@
  */
 
 
-global defaultverbose = 1;	/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 /*
  * test defaults
  */
-global K1 = 2^17;
-global K2 = 2^12;
-global BASEB = 16;
-global BASE = 2^BASEB;
+global test4100_K1 = 2^17;
+global test4100_K2 = 2^12;
+global test4100_BASE = 2^config("baseb");
 
-define rlen_4100(N) = rand(BASE^(N-1), BASE^N);
+define rlen_4100(N) = rand(test4100_BASE^(N-1), test4100_BASE^N);
 
 define olen(N)
 {
@@ -234,7 +232,7 @@ define times(str,N,n,verbose)
 	m = olen(N);
 	m2 = m^2;
 	if (isnull(n)) {
-		n = ceil(K1/power(N,1.585));
+		n = ceil(test4100_K1/power(N,1.585));
 		if (verbose > 1)
 			printf("n = %d\n", n);
 	}
@@ -247,38 +245,38 @@ define times(str,N,n,verbose)
 		C[i] = rand(m2);
 	}
 	z = rcin(0,m);	/* to initialize redc and maybe lastmod information */
-	t = runtime();
+	t = usertime();
 	for (i = 0; i < n; i++)
 		z = rcin(A[i],m);
-	trcin = round(runtime() - t, 3);
-	t = runtime();
+	trcin = round(usertime() - t, 3);
+	t = usertime();
 	for (i = 0; i < n; i++)
 		z = rcout(A[i],m);
-	trcout = round(runtime() - t, 3);
-	t = runtime();
+	trcout = round(usertime() - t, 3);
+	t = usertime();
 	for (i = 0; i < n; i++)
 		z = rcmul(A[i],B[i],m);
-	trcmul = round(runtime() - t, 3);
-	t = runtime();
+	trcmul = round(usertime() - t, 3);
+	t = usertime();
 	for (i = 0; i < n; i++)
 		z = rcsq(A[i],m);
-	trcsq = round(runtime() - t, 3);
-	t = runtime();
+	trcsq = round(usertime() - t, 3);
+	t = usertime();
 	for (i = 0; i < n; i++)
 		z = A[i] * B[i];
-	tmul = round(runtime() - t, 3);
-	t = runtime();
+	tmul = round(usertime() - t, 3);
+	t = usertime();
 	for (i = 0; i < n; i++)
 		z = A[i]^2;
-	tsq = round(runtime() - t, 3);
-	t = runtime();
+	tsq = round(usertime() - t, 3);
+	t = usertime();
 	for (i = 0; i < n; i++)
 		z = C[i] % A[i];
-	tmod = round(runtime() - t, 3);
-	t = runtime();
+	tmod = round(usertime() - t, 3);
+	t = usertime();
 	for (i = 0; i < n; i++)
 		quomod(C[i], A[i], x, y);
-	tquomod = round(runtime() - t,3);
+	tquomod = round(usertime() - t,3);
 
 	if (verbose > 1) {
 		printf("rcin: %d, rcout: %d, rcmul: %d, rcsq: %d\n",
@@ -308,7 +306,7 @@ define powtimes(str, N1, N2, n, verbose)
 		N2 = 1;
 
 	if (isnull(n)) {
-		n = ceil(K2/power(N1, 1.585)/N2);
+		n = ceil(test4100_K2/power(N1, 1.585)/N2);
 		printf ("n  = %d\n", n);
 	}
 	mat A[n];
@@ -316,8 +314,8 @@ define powtimes(str, N1, N2, n, verbose)
 	mat B[n];
 	v = olen(N1);
 
-	cp = config("pow2", 1);
-	crc = config("redc2", 1);
+	cp = config("pow2", 2);
+	crc = config("redc2", 2);
 
 	/* initialize redc and lastmod info */
 
@@ -328,29 +326,29 @@ define powtimes(str, N1, N2, n, verbose)
 		Ar[i] = rcin(A[i], v);
 		B[i] = rlen_4100(N2);
 	}
-	t = runtime();
+	t = usertime();
 	for (i = 0; i < n; i++)
 		z1 += pmod(A[i], B[i], v);
-	tbignum = round(runtime() - t, 4);
+	tbignum = round(usertime() - t, 4);
 	config("pow2", 1e6);
-	t = runtime();
+	t = usertime();
 	for (i = 0; i < n; i++)
 		z2 += pmod(A[i], B[i], v);
-	tnormal = round(runtime() - t, 4);
+	tnormal = round(usertime() - t, 4);
 	config("redc2",1e6);
-	t = runtime();
+	t = usertime();
 	for (i = 0; i < n; i++)
 		z3 += pmod(A[i], B[i], v);
-	tsmall = round(runtime() - t, 4);
-	t = runtime();
+	tsmall = round(usertime() - t, 4);
+	t = usertime();
 	for (i = 0; i < n; i++)
 		z4 += rcpow(Ar[i], B[i], v);
-	trcsmall = round(runtime() - t, 4);
-	config("redc2", 1);
-	t = runtime();
+	trcsmall = round(usertime() - t, 4);
+	config("redc2", 2);
+	t = usertime();
 	for (i = 0; i < n; i++)
 		z5 += rcpow(Ar[i], B[i], v);
-	trcbig = round(runtime() - t, 4);
+	trcbig = round(usertime() - t, 4);
 
 	if (z1 != z2) {
 		++m;
@@ -408,7 +406,7 @@ define inittimes(str,N,n,verbose)
 	}
 	m = 0;
 	if (isnull(n)) {
-		n = ceil(K1/N^2);
+		n = ceil(test4100_K1/N^2);
 		if (verbose > 1) {
 			printf ("n = %d\n", n);
 		}
@@ -421,13 +419,13 @@ define inittimes(str,N,n,verbose)
 		M[i] = olen(N);
 		A[i] = rand(M[i]);
 	}
-	t = runtime();
+	t = usertime();
 	for (i = 0; i < n; i++)
 		R[i] = rcin(A[i], M[i]);
-	trcin = round(runtime() - t, 4);
+	trcin = round(usertime() - t, 4);
 	for (i = 0; i < n; i++)
 		B[i] = rcout(R[i], M[i]);
-	trcout = round(runtime() - t, 4);
+	trcout = round(usertime() - t, 4);
 	for (i = 0; i < n; i++) {
 		if (B[i] != A[i]) {
 			++m;

cal/test4600.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.4 $
- * @(#) $Id: test4600.cal,v 29.4 2001/04/10 22:09:02 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test4600.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test4600.cal,v $
  *
  * Under source code control:	1996/07/02 20:04:40
@@ -30,8 +30,7 @@
  */
 
 
-global defaultverbose = 1		/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 /*
  * test globals

cal/test5100.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test5100.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test5100.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test5100.cal,v $
  *
  * Under source code control:	1996/12/02 23:57:10
@@ -30,8 +30,7 @@
  */
 
 
-global defaultverbose = 1;	/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 /*
  * We test the new code generator declaration scope and order.

cal/test5200.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test5200.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test5200.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test5200.cal,v $
  *
  * Under source code control:	1997/02/07 02:48:10
@@ -30,8 +30,7 @@
  */
 
 
-global defaultverbose = 1;	/* default verbose value */
-global err;
+defaultverbose = 1;	/* default verbose value */
 
 /*
  * test the fix of a global/static bug

cal/test8400.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test8400.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test8400.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test8400.cal,v $
  *
  * Under source code control:	1999/10/31 01:00:03

cal/test8500.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: test8500.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test8500.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test8500.cal,v $
  *
  * Under source code control:	1999/11/12 20:59:59

cal/test8600.cal

@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test8600.cal,v 29.1 2000/12/04 19:57:02 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: test8600.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test8600.cal,v $
  *
  * Under source code control:	2000/12/04 19:57:02

cal/unitfrac.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: unitfrac.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: unitfrac.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/unitfrac.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:38

cal/varargs.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: varargs.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: varargs.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/varargs.cal,v $
  *
  * Under source code control:	1991/05/22 21:56:34

cal/xx_print.cal

@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: xx_print.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: xx_print.cal,v 30.1 2007/03/16 11:09:54 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/xx_print.cal,v $
  *
  * Under source code control:	1997/04/17 00:08:50

calc.c

@@ -1,7 +1,7 @@
 /*
  * calc - arbitrary precision calculator
  *
- * Copyright (C) 1999  David I. Bell, Landon Curt Noll and Ernest Bowen
+ * Copyright (C) 1999-2007  David I. Bell, Landon Curt Noll and Ernest Bowen
  *
  * Primary author:  David I. Bell
  *
@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.8 $
- * @(#) $Id: calc.c,v 29.8 2001/04/10 22:03:13 chongo Exp $
+ * @(#) $Revision: 30.4 $
+ * @(#) $Id: calc.c,v 30.4 2008/04/15 21:17:57 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.c,v $
  *
  * Under source code control:	1990/02/15 01:48:11
@@ -42,6 +42,7 @@
 
 #if defined(_WIN32)
 # include <io.h>
+# if !defined(NOTCYGWIN)
 /*
  * getopt.h file is from the Cygwin GNU library
  *
@@ -49,6 +50,7 @@
  *	http://sources.redhat.com/cygwin/
  */
 # include "../getopt/getopt.h"
+# endif
 # define strdup _strdup
 # define isatty _isatty
 #endif /* Windoz */
@@ -64,7 +66,7 @@
 #include "have_uid_t.h"
 #include "have_const.h"
 #include "custom.h"
-#include "math_error.h"
+#include "lib_calc.h"
 #include "args.h"
 #include "zmath.h"
 
@@ -83,13 +85,16 @@
 # define strdup(x) calc_strdup((CONST char *)(x))
 #endif /* HAVE_STRDUP */
 
+#include "have_unused.h"
+
 
 /*
- * static definitions and functions
+ * S_FUNC definitions and functions
  */
-static void intint(int arg);	/* interrupt routine */
-static int nextcp(char **cpp, int *ip, int argc, char **argv, BOOL haveendstr);
-static void set_run_state(run state);
+S_FUNC void intint(int arg);	/* interrupt routine */
+S_FUNC void calc_interrupt(char *fmt, ...);
+S_FUNC int nextcp(char **cpp, int *ip, int argc, char **argv, BOOL haveendstr);
+S_FUNC void set_run_state(run state);
 
 /*
  * Top level calculator routine.
@@ -109,7 +114,7 @@ main(int argc, char **argv)
 	BOOL done = FALSE;
 	BOOL havearg;
 	BOOL haveendstr;
-	int len;
+	size_t len;
 
 	/*
 	 * parse args
@@ -186,7 +191,7 @@ main(int argc, char **argv)
 							fprintf(stderr,
 								"-m expects"
 								" argument");
-							exit (1);
+							exit(2);
 						}
 						cp = argv[index];
 					}
@@ -201,7 +206,7 @@ main(int argc, char **argv)
 						fprintf(stderr,
 							"%s: unknown -m arg\n",
 							program);
-						exit(1);
+						exit(3);
 					}
 					allow_read = (((*cp-'0') & 04) > 0);
 					allow_write = (((*cp-'0') & 02) > 0);
@@ -209,12 +214,18 @@ main(int argc, char **argv)
 					cp++;
 					if (*cp != ' ' && *cp != '\0') {
 						fprintf(stderr, "??? m-arg");
-						exit(1);
+						exit(4);
 					}
 					havearg = TRUE;
 					break;
 				case 'n':
-					new_std = TRUE;
+					/*
+					 * -n is deprecated and may be reused
+					 * for another purpose in the future
+					 */
+					break;
+				case 'O':
+					use_old_std = TRUE;
 					break;
 				case 'p':
 					p_flag = TRUE;
@@ -237,8 +248,13 @@ main(int argc, char **argv)
 					 * call libcalc_call_me_last() -
 					 * nothing to cleanup
 					 */
-					printf("%s (version %s)\n",
-					       CALC_TITLE, version());
+					fputs(CALC_TITLE, stdout);
+#if defined(CUSTOM)
+					fputs(" w/custom functions", stdout);
+#else
+					fputs(" w/o custom functions", stdout);
+#endif /* CUSTOM */
+					printf(" (version %s)\n", version());
 					exit(0);
 				case 'D':
 					/*
@@ -254,7 +270,7 @@ main(int argc, char **argv)
 						   FALSE)) {
 					    fprintf(stderr,
 					    	    "-D expects argument\n");
-					    exit (1);
+					    exit(5);
 					}
 					havearg = TRUE;
 					if (*cp != ':') {
@@ -262,7 +278,7 @@ main(int argc, char **argv)
 						    fprintf(stderr,
 						    	    "-D expects"
 							    " integer\n");
-						    exit (1);
+						    exit(6);
 						}
 						calc_debug = cp;
 						(void) strtol(cp, &endcp, 10);
@@ -272,7 +288,7 @@ main(int argc, char **argv)
 						    fprintf(stderr,
 						    	    "Bad syntax im -D"
 							    " arg\n");
-						    exit (1);
+						    exit(7);
 						}
 						if (*cp != ':') {
 						    if (nextcp(&cp, &index,
@@ -287,14 +303,14 @@ main(int argc, char **argv)
 						fprintf(stderr,
 							"-D : expects"
 							" argument\n");
-						exit (1);
+						exit(8);
 					}
 					if (*cp != ':') {
 						if (*cp < '0' || *cp > '9') {
 						    fprintf(stderr,
 						    	    "-D : expects"
 							    " integer\n");
-						    exit (1);
+						    exit(9);
 						}
 						resource_debug = cp;
 						(void) strtol(cp, &endcp, 10);
@@ -304,7 +320,7 @@ main(int argc, char **argv)
 						    fprintf(stderr,
 						    	    "Bad syntax im -D"
 							    " : arg\n");
-						    exit (1);
+						    exit(10);
 						}
 						if (*cp != ':') {
 							if (nextcp(&cp, &index,
@@ -319,12 +335,12 @@ main(int argc, char **argv)
 						   FALSE)) {
 					    fprintf(stderr, "-D : : expects"
 					    	    " argument\n");
-					    exit (1);
+					    exit(11);
 					}
 					if (*cp < '0' || *cp > '9') {
 					    fprintf(stderr, "-D :: expects"
 					    	    " integer\n");
-					    exit (1);
+					    exit(12);
 					}
 					user_debug = cp;
 					(void) strtol(cp, &endcp, 10);
@@ -332,7 +348,7 @@ main(int argc, char **argv)
 					if (*cp != '\0' && *cp != ' ') {
 						fprintf(stderr, "Bad syntax in"
 							" -D : : arg\n");
-						exit (1);
+						exit(13);
 					}
 					break;
 				case 'f':
@@ -341,13 +357,13 @@ main(int argc, char **argv)
 						   haveendstr)) {
 					    fprintf(stderr, "-f expects"
 						    " filename\n");
-					    exit (1);
+					    exit(14);
 					}
 					if (*cp == ';') {
 						fprintf(stderr,
 							"-f expects"
 							" filename\n");
-						exit (1);
+						exit(15);
 					}
 					havearg = TRUE;
 					if (cmdlen > 0)
@@ -365,7 +381,7 @@ main(int argc, char **argv)
 						    fprintf(stderr, "-f -once"
 						    	    " expects"
 							    " filename\n");
-						    exit (1);
+						    exit(16);
 						}
 					}
 					bp = cmdbuf + cmdlen;
@@ -375,17 +391,17 @@ main(int argc, char **argv)
 							fprintf(stderr,
 								"Null"
 								" filename!");
-							exit (1);
+							exit(17);
 						}
 						if (cmdlen + len + 2 > MAXCMD) {
 							fprintf(stderr,
 								"Commands too"
 								" long");
-							exit (1);
+							exit(18);
 						}
 						/* XXX What if *cp = '\''? */
 						*bp++ = '\'';
-						strcpy(bp, cp);
+						strncpy(bp, cp, len+1);
 						bp += len;
 						*bp++ = '\'';
 						cp += len;
@@ -396,7 +412,7 @@ main(int argc, char **argv)
 								fprintf(stderr,
 								   "Commands"
 								   " too long");
-								exit (1);
+								exit(19);
 							}
 							*bp++ =  *cp++;
 							cmdlen++;
@@ -408,6 +424,7 @@ main(int argc, char **argv)
 						cp++;
 					*bp++ = ';';
 					cmdlen++;
+					s_flag = TRUE;	/* -f implies -s */
 					break;
 
 				case 's':
@@ -423,12 +440,14 @@ main(int argc, char **argv)
 					fprintf(stderr, "Illegal option -%c\n",
 							c);
 					fprintf(stderr,
-		"usage: %s [-a] [-c] [-C] [-d] [-e] [-h] [-i] [-m mode]\n"
+		"usage: %s [-c] [-C] [-d] [-e] [-h] [-i] [-m mode]\n"
 		"\t[-D calc_debug[:resource_debug[:user_debug]]]\n"
-		"\t[-n] [-p] [-q] [-u] [-v] "
-		"[--] [calc_cmd ...]\n",
-		program);
-					exit(1);
+		"\t[-O] [-p] [-q] [-s] [-u] [-v] "
+		"[--] [calc_cmd ...]\n"
+		"usage: %s ... -f filename\n"
+		"1st cscript line: #/path/to/calc ... -f\n",
+		program, program);
+					exit(20);
 			}
 			if (havearg)
 				break;
@@ -444,16 +463,19 @@ main(int argc, char **argv)
 	}
 
 	while (index < maxindex) {
+		size_t cplen;
+
 		if (cmdlen > 0)
 			cmdbuf[cmdlen++] = ' ';
-		newcmdlen = cmdlen + strlen(cp);
+		cplen = strlen(cp);
+		newcmdlen = cmdlen + cplen;
 		if (newcmdlen > MAXCMD) {
 			fprintf(stderr,
 				"%s: commands too long\n",
 				program);
-			exit(1);
+			exit(21);
 		}
-		strcpy(cmdbuf + cmdlen, cp);
+		strncpy(cmdbuf + cmdlen, cp, cplen+1);
 		cmdlen = newcmdlen;
 		index++;
 		if (index < maxindex)
@@ -522,14 +544,13 @@ main(int argc, char **argv)
 	/*
 	 * establish error longjump point with initial conditions
 	 */
-	if (setjmp(jmpbuf) == 0) {
+	if (setjmp(calc_scanerr_jmpbuf) == 0) {
 
 		/*
 		 * reset/initialize the computing environment
 		 */
-		if (post_init)
-			initialize();
-		post_init = TRUE;
+		initialize();
+		calc_use_scanerr_jmpbuf = 1;
 	}
 
 	/*
@@ -571,7 +592,7 @@ main(int argc, char **argv)
 	if (run_state == RUN_PRE_CMD_ARGS) {
 		if (havecommands) {
 			set_run_state(RUN_CMD_ARGS);
-			(void) openstring(cmdbuf, (long) strlen(cmdbuf));
+			(void) openstring(cmdbuf, strlen(cmdbuf));
 			getcommands(FALSE);
 			closeinput();
 		}
@@ -699,12 +720,12 @@ main(int argc, char **argv)
  *	arg		to keep ANSI C happy
  */
 /*ARGSUSED*/
-static void
-intint(int arg)
+S_FUNC void
+intint(int UNUSED arg)
 {
 	(void) signal(SIGINT, intint);
 	if (inputwait || (++abortlevel >= ABORT_NOW)) {
-		math_error("\nABORT");
+		calc_interrupt("\nABORT");
 		/*NOTREACHED*/
 	}
 	if (abortlevel >= ABORT_MATH)
@@ -714,14 +735,12 @@ intint(int arg)
 
 
 /*
- * Routine called on any runtime error, to complain about it (with possible
- * arguments), and then longjump back to the top level command scanner.
+ * report an interrupt
  */
-void
-math_error(char *fmt, ...)
+static void
+calc_interrupt(char *fmt, ...)
 {
 	va_list ap;
-	char buf[MAXERROR+1];
 
 	if (funcname && (*funcname != '*'))
 		fprintf(stderr, "\"%s\": ", funcname);
@@ -729,12 +748,13 @@ math_error(char *fmt, ...)
 	    !inputisterminal()))
 		fprintf(stderr, "line %ld: ", funcline);
 	va_start(ap, fmt);
-	vsprintf(buf, fmt, ap);
+	vsnprintf(calc_err_msg, MAXERROR, fmt, ap);
 	va_end(ap);
-	fprintf(stderr, "%s\n", buf);
+	calc_err_msg[MAXERROR] = '\0';
+	fprintf(stderr, "%s\n\n", calc_err_msg);
 	funcname = NULL;
-	if (post_init) {
-		longjmp(jmpbuf, 1);
+	if (calc_use_scanerr_jmpbuf != 0) {
+		longjmp(calc_scanerr_jmpbuf, 22);
 	} else {
 		fprintf(stderr, "It is too early provide a command line prompt "
 				"so we must simply exit.  Sorry!\n");
@@ -742,11 +762,11 @@ math_error(char *fmt, ...)
 		 * don't call libcalc_call_me_last() -- we might loop
 		 * and besides ... this is an unusual internal error case
 		 */
-		exit(3);
+		exit(22);
 	}
 }
 
-static int
+S_FUNC int
 nextcp(char **cpp, int *ip, int argc, char **argv, BOOL haveendstr)
 {
 	char *cp;
@@ -785,7 +805,7 @@ nextcp(char **cpp, int *ip, int argc, char **argv, BOOL haveendstr)
 }
 
 
-static void
+S_FUNC void
 set_run_state(run state)
 {
 	if (conf->calc_debug & CALCDBG_RUNSTATE)

calc.h

@@ -1,7 +1,7 @@
 /*
  * calc - definitions for calculator program
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 1999-2007  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.6 $
- * @(#) $Id: calc.h,v 29.6 2001/03/17 21:31:47 chongo Exp $
+ * @(#) $Revision: 30.2 $
+ * @(#) $Id: calc.h,v 30.2 2007/07/10 17:44:52 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.h,v $
  *
  * Under source code control:	1990/02/15 01:48:31
@@ -32,9 +32,15 @@
 #define __CALC_H__
 
 #include <setjmp.h>
-#include "win32dll.h"
-#include "value.h"
-#include "have_const.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "decl.h"
+# include "value.h"
+# include "have_const.h"
+#else
+# include <calc/decl.h>
+# include <calc/value.h>
+# include <calc/have_const.h>
+#endif
 
 
 /*
@@ -54,9 +60,12 @@
 #define HOMECHAR	'~'	/* char which indicates home directory */
 #define DOTCHAR		'.'	/* char which indicates current directory */
 #define PATHCHAR	'/'	/* char which separates path components */
+#if defined(__MSDOS__) || defined(__WIN32)
+#define LISTCHAR	';'	/* char which separates paths in a list */
+#else
 #define LISTCHAR	':'	/* char which separates paths in a list */
+#endif
 #define MAXCMD		16384	/* maximum length of command invocation */
-#define MAXERROR	512	/* maximum length of error message string */
 
 #define SYMBOLSIZE	256	/* maximum symbol name size */
 #define MAXLABELS	100	/* maximum number of user labels in function */
@@ -81,6 +90,7 @@
 #define ABORT_NOW	4	/* abort right away */
 
 #define ERRMAX 20		/* default errmax value */
+#define E_OK 0			/* no error */
 
 /*
  * File ids corresponding to standard in, out, error, and when not in use.
@@ -88,145 +98,143 @@
 #define FILEID_STDIN	((FILEID) 0)
 #define FILEID_STDOUT	((FILEID) 1)
 #define FILEID_STDERR	((FILEID) 2)
-#define FILEID_NONE	((FILEID) -1)
+#define FILEID_NONE	((FILEID) -1)	/* must be < 0 */
 
 /*
  * File I/O routines.
  */
-extern DLL FILEID openid(char *name, char *mode);
-extern DLL FILEID indexid(long index);
-extern DLL BOOL validid(FILEID id);
-extern DLL BOOL errorid(FILEID id);
-extern DLL BOOL eofid(FILEID id);
-extern DLL int closeid(FILEID id);
-extern DLL int getcharid(FILEID id);
-extern DLL int idprintf(FILEID id, char *fmt, int count, VALUE **vals);
-extern DLL int idfputc(FILEID id, int ch);
-extern DLL int idfputs(FILEID id, char *str);
-extern DLL int printid(FILEID id, int flags);
-extern DLL int flushid(FILEID id);
-extern DLL int readid(FILEID id, int flags, char **retptr);
-extern DLL int getloc(FILEID id, ZVALUE *loc);
-extern DLL int setloc(FILEID id, ZVALUE zpos);
-extern DLL int getsize(FILEID id, ZVALUE *size);
-extern DLL int get_device(FILEID id, ZVALUE *dev);
-extern DLL int get_inode(FILEID id, ZVALUE *ino);
-extern DLL FILEID reopenid(FILEID id, char *mode, char *name);
-extern DLL int closeall(void);
+E_FUNC FILEID openid(char *name, char *mode);
+E_FUNC FILEID openpathid(char *name, char *mode, char *pathlist);
+E_FUNC FILEID indexid(long index);
+E_FUNC BOOL validid(FILEID id);
+E_FUNC BOOL errorid(FILEID id);
+E_FUNC BOOL eofid(FILEID id);
+E_FUNC int closeid(FILEID id);
+E_FUNC int getcharid(FILEID id);
+E_FUNC int idprintf(FILEID id, char *fmt, int count, VALUE **vals);
+E_FUNC int idfputc(FILEID id, int ch);
+E_FUNC int idfputs(FILEID id, STRING *str);
+E_FUNC int printid(FILEID id, int flags);
+E_FUNC int flushid(FILEID id);
+E_FUNC int readid(FILEID id, int flags, STRING **retptr);
+E_FUNC int getloc(FILEID id, ZVALUE *loc);
+E_FUNC int setloc(FILEID id, ZVALUE zpos);
+E_FUNC int getsize(FILEID id, ZVALUE *size);
+E_FUNC int get_device(FILEID id, ZVALUE *dev);
+E_FUNC int get_inode(FILEID id, ZVALUE *ino);
+E_FUNC FILEID reopenid(FILEID id, char *mode, char *name);
+E_FUNC int closeall(void);
 
 #if !defined(_WIN32)
-extern DLL int flushall(void);
+E_FUNC int flushall(void);
 #endif
 
-extern DLL int idfputstr(FILEID id, char *str);
-extern DLL int rewindid(FILEID id);
-extern DLL void rewindall(void);
-extern DLL ZVALUE zfilesize(FILEID id);
-extern DLL void showfiles(void);
-extern DLL int fscanfid(FILEID id, char *fmt, int count, VALUE **vals);
-extern DLL int scanfstr(char *str, char *fmt, int count, VALUE **vals);
-extern DLL int ftellid(FILEID id, ZVALUE *res);
-extern DLL int fseekid(FILEID id, ZVALUE offset, int whence);
-extern DLL int isattyid(FILEID id);
-extern DLL int fsearch(FILEID id, char *str, ZVALUE start, ZVALUE end, ZVALUE *res);
-extern DLL int frsearch(FILEID id, char *str, ZVALUE first, ZVALUE last, ZVALUE *res);
-extern DLL void showconstants(void);
-extern DLL void freeconstant(unsigned long);
-extern DLL void freestringconstant(long);
-extern DLL void trimconstants(void);
+E_FUNC int idfputstr(FILEID id, char *str);
+E_FUNC int rewindid(FILEID id);
+E_FUNC void rewindall(void);
+E_FUNC ZVALUE zfilesize(FILEID id);
+E_FUNC void showfiles(void);
+E_FUNC int fscanfid(FILEID id, char *fmt, int count, VALUE **vals);
+E_FUNC int scanfstr(char *str, char *fmt, int count, VALUE **vals);
+E_FUNC int ftellid(FILEID id, ZVALUE *res);
+E_FUNC int fseekid(FILEID id, ZVALUE offset, int whence);
+E_FUNC int isattyid(FILEID id);
+E_FUNC int fsearch(FILEID id, char *str, ZVALUE start, ZVALUE end, ZVALUE *res);
+E_FUNC int frsearch(FILEID id, char *str, ZVALUE first, ZVALUE last, ZVALUE *res);
+E_FUNC void showconstants(void);
+E_FUNC void freeconstant(unsigned long);
+E_FUNC void freestringconstant(long);
+E_FUNC void trimconstants(void);
 
 /*
  * Input routines.
  */
-extern DLL int openstring(char *str, long num);
-extern DLL int openterminal(void);
-extern DLL int opensearchfile(char *name, char *pathlist, char *exten, int reopen_ok);
-extern DLL char *nextline(void);
-extern DLL int nextchar(void);
-extern DLL void reread(void);
-extern DLL void resetinput(void);
-extern DLL void setprompt(char *);
-extern DLL BOOL inputisterminal(void);
-extern DLL int inputlevel(void);
-extern DLL long calclevel(void);
-extern DLL char *inputname(void);
-extern DLL long linenumber(void);
-extern DLL void runrcfiles(void);
-extern DLL void closeinput(void);
+E_FUNC int openstring(char *str, size_t num);
+E_FUNC int openterminal(void);
+E_FUNC int opensearchfile(char *name, char *pathlist, char *exten, int reopen_ok);
+E_FUNC char *nextline(void);
+E_FUNC int nextchar(void);
+E_FUNC void reread(void);
+E_FUNC void resetinput(void);
+E_FUNC void setprompt(char *);
+E_FUNC BOOL inputisterminal(void);
+E_FUNC int inputlevel(void);
+E_FUNC long calclevel(void);
+E_FUNC char *inputname(void);
+E_FUNC long linenumber(void);
+E_FUNC void runrcfiles(void);
+E_FUNC void closeinput(void);
 
 /*
  * Other routines.
  */
-extern DLL NUMBER *constvalue(unsigned long index);
-extern DLL long addnumber(char *str);
-extern DLL long addqconstant(NUMBER *q);
-extern DLL void initstack(void);
-extern DLL void getcommands(BOOL toplevel);
-extern DLL void givehelp(char *type);
-extern DLL void libcalc_call_me_first(void);
-extern DLL void libcalc_call_me_last(void);
-extern DLL BOOL calc_tty(int fd);
-extern DLL BOOL orig_tty(int fd);
-extern DLL void showerrors(void);
-extern DLL char *calc_strdup(CONST char *);
+E_FUNC NUMBER *constvalue(unsigned long index);
+E_FUNC long addnumber(char *str);
+E_FUNC long addqconstant(NUMBER *q);
+E_FUNC void initstack(void);
+E_FUNC void getcommands(BOOL toplevel);
+E_FUNC void givehelp(char *type);
+E_FUNC void libcalc_call_me_first(void);
+E_FUNC void libcalc_call_me_last(void);
+E_FUNC BOOL calc_tty(int fd);
+E_FUNC BOOL orig_tty(int fd);
+E_FUNC void showerrors(void);
+E_FUNC char *calc_strdup(CONST char *);
 
 /*
  * Initialization
  */
-extern DLL void initialize(void);
-extern DLL void reinitialize(void);
+E_FUNC void initialize(void);
+E_FUNC void reinitialize(void);
 #if !defined (_WIN32)
-extern DLL int isatty(int tty);	/* TRUE if fd is a tty */
+E_FUNC int isatty(int tty);	/* TRUE if fd is a tty */
 #endif
-extern DLL char *version(void);	/* return version string */
-extern DLL int post_init;	/* TRUE => math_error setjmp is ready */
+E_FUNC char *version(void);	/* return version string */
 
 /*
  * global flags and definitions
  */
-extern DLL int abortlevel;	/* current level of aborts */
-extern DLL BOOL inputwait;	/* TRUE if in a terminal input wait */
-extern DLL jmp_buf jmpbuf;	/* for errors */
+EXTERN int abortlevel;	/* current level of aborts */
+EXTERN BOOL inputwait;	/* TRUE if in a terminal input wait */
 
-extern DLL int p_flag;		/* TRUE => pipe mode */
-extern DLL int q_flag;		/* TRUE => don't execute rc files */
-extern DLL int u_flag;		/* TRUE => unbuffer stdin and stdout */
-extern DLL int d_flag;		/* TRUE => disable heading, resource_debug */
-extern DLL int c_flag;		/* TRUE => continue after error if permitted */
-extern DLL int i_flag;		/* TRUE => try to go interactive after error */
-extern DLL int s_flag;		/* TRUE => keep args as strings for argv() */
-extern DLL int stoponerror;	/* >0 => stop, <0 => continue, ==0 => use -c */
-extern DLL BOOL abort_now;	/* TRUE => try to go interactive */
+EXTERN int p_flag;		/* TRUE => pipe mode */
+EXTERN int q_flag;		/* TRUE => don't execute rc files */
+EXTERN int u_flag;		/* TRUE => unbuffer stdin and stdout */
+EXTERN int d_flag;		/* TRUE => disable heading, resource_debug */
+EXTERN int c_flag;		/* TRUE => continue after error if permitted */
+EXTERN int i_flag;		/* TRUE => try to go interactive after error */
+E_FUNC int s_flag;		/* TRUE => keep args as strings for argv() */
+EXTERN long stoponerror;	/* >0 => stop, <0 => continue, ==0 => use -c */
+EXTERN BOOL abort_now;	/* TRUE => try to go interactive */
 
-extern DLL int argc_value;	/* count of argv[] strings for argv() builtin */
-extern DLL char **argv_value;	/* argv[] strings for argv() builtin */
+E_FUNC int argc_value;	/* count of argv[] strings for argv() builtin */
+E_FUNC char **argv_value;	/* argv[] strings for argv() builtin */
 
-extern DLL char *pager;		/* $PAGER or default */
-extern DLL int stdin_tty;	/* TRUE if stdin is a tty */
-extern DLL int havecommands;	/* TRUE if have cmd args) */
-extern DLL char *program;	/* our name */
-extern DLL char *base_name;	/* basename of our name */
-extern DLL char cmdbuf[];	/* command line expression */
+EXTERN char *pager;		/* $PAGER or default */
+EXTERN int stdin_tty;	/* TRUE if stdin is a tty */
+EXTERN int havecommands;	/* TRUE if have cmd args) */
+EXTERN char *program;	/* our name */
+EXTERN char *base_name;	/* basename of our name */
+EXTERN char cmdbuf[];	/* command line expression */
 
-extern DLL int abortlevel;	/* current level of aborts */
-extern DLL BOOL inputwait;	/* TRUE if in a terminal input wait */
-extern DLL VALUE *stack;	/* execution stack */
-extern DLL int dumpnames;	/* TRUE => dump names rather than indices */
+EXTERN int abortlevel;	/* current level of aborts */
+EXTERN BOOL inputwait;	/* TRUE if in a terminal input wait */
+EXTERN VALUE *stack;	/* execution stack */
+EXTERN int dumpnames;	/* TRUE => dump names rather than indices */
 
-extern DLL char *calcpath;	/* $CALCPATH or default */
-extern DLL char *calcrc;	/* $CALCRC or default */
-extern DLL char *calcbindings;	/* $CALCBINDINGS or default */
-extern DLL char *home;		/* $HOME or default */
-extern DLL char *shell;		/* $SHELL or default */
-extern DLL char *program;	/* our name (argv[0]) */
+EXTERN char *calcpath;	/* $CALCPATH or default */
+EXTERN char *calcrc;	/* $CALCRC or default */
+EXTERN char *calcbindings;	/* $CALCBINDINGS or default */
+EXTERN char *home;		/* $HOME or default */
+EXTERN char *shell;		/* $SHELL or default */
 
-extern DLL int no_env;		/* TRUE (-e) => ignore env vars on startup */
-extern DLL int errmax;	/* if >= 0, error when errcount exceeds errmax */
-extern DLL int new_std;		/* TRUE (-n) => use newstd configuration */
+EXTERN int no_env;	/* TRUE (-e) => ignore env vars on startup */
+EXTERN long errmax;	/* if >= 0, error when errcount exceeds errmax */
+EXTERN int use_old_std;	/* TRUE (-O) => use classic configuration */
 
-extern DLL int allow_read;	/* FALSE => dont open any files for reading */
-extern DLL int allow_write; 	/* FALSE => dont open any files for writing */
-extern DLL int allow_exec;	/* FALSE => may not execute any commands */
+EXTERN int allow_read;	/* FALSE => dont open any files for reading */
+EXTERN int allow_write; 	/* FALSE => dont open any files for writing */
+EXTERN int allow_exec;	/* FALSE => may not execute any commands */
 
 /*
  * calc startup and run state
@@ -242,19 +250,19 @@ typedef enum {
     RUN_EXIT,			/* normal exit from calc */
     RUN_EXIT_WITH_ERROR		/* exit with error */
 } run;
-extern DLL run run_state;
-extern DLL char *run_state_name(run state);
+EXTERN run run_state;
+E_FUNC char *run_state_name(run state);
 
 /*
  * calc version information
  */
 #define CALC_TITLE "C-style arbitrary precision calculator"
-extern int calc_major_ver;
-extern int calc_minor_ver;
-extern int calc_major_patch;
-extern char *calc_minor_patch;
-extern char *Copyright;
-extern DLL char *version(void);
+EXTERN int calc_major_ver;
+EXTERN int calc_minor_ver;
+EXTERN int calc_major_patch;
+EXTERN int calc_minor_patch;
+EXTERN char *Copyright;
+E_FUNC char *version(void);
 
 
 #endif /* !__CALC_H__ */

calc.man

@@ -1,5 +1,5 @@
 .\"
-.\" Copyright (C) 1999	Landon Curt Noll
+.\" Copyright (C) 1999-2007	Landon Curt Noll
 .\"
 .\" Calc is open software; you can redistribute it and/or modify it under
 .\" the terms of the version 2.1 of the GNU Lesser General Public License
@@ -13,10 +13,10 @@
 .\" A copy of version 2.1 of the GNU Lesser General Public License is
 .\" distributed with calc under the filename COPYING-LGPL.  You should have
 .\" received a copy with calc; if not, write to Free Software Foundation, Inc.
-.\" 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+.\" 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 .\"
-.\" @(#) $Revision: 29.6 $
-.\" @(#) $Id: calc.man,v 29.6 2001/04/10 21:48:46 chongo Exp $
+.\" @(#) $Revision: 30.3 $
+.\" @(#) $Id: calc.man,v 30.3 2007/09/08 02:53:09 chongo Exp $
 .\" @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.man,v $
 .\"
 .\" Under source code control:	    1991/07/23 05:48:26
@@ -28,7 +28,7 @@
 .\" calculator by David I. Bell
 .\" man page by Landon Noll
 .\"
-.TH calc 1 "^..^" "1999-11-30"
+.TH calc 1 "^..^" "2007-02-06"
 .SH NAME
 calc \- arbitrary precision calculator
 .SH SYNOPSIS
@@ -44,17 +44,17 @@ calc \- arbitrary precision calculator
 .RB [ \-h ]
 .RB [ \-i ]
 .RB [ \-m\ \&mode ]
-.RB [ \-n ]
+.RB [ \-O ]
 .br
 .RB [ \-p ]
 .RB [ \-q ]
 .RB [ \-s ]
 .RB [ \-u ]
 .RB [ \-v ]
-.RB [ calc_cmd\ \&.\|.\|. ]
+.RB [ [\-\-]\ calc_cmd\ \&.\|.\|. ]
 .in -5n
 .sp
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ [other_flags\ \&...]
+\fI#!${BINDIR}/calc\fP\ [other_flags\ \&...] \fB\-f\fP
 .SH DESCRIPTION
 \&
 .br
@@ -63,8 +63,11 @@ CALC OPTIONS
 
 .TP
 .B \-c
-Continue reading command lines even after an execution
+Continue reading command lines even after a scan/parse
 error has caused the abandonment of a line.
+Note that this option only deals with scanning and
+parsing of the calc language.
+It does not deal with execution or run-time errors.
 .sp 1
 For example:
 .sp 1
@@ -76,7 +79,7 @@ calc read many_errors.cal
 .sp 1
 will cause
 .B calc
-to abort on the first error, whereas:
+to abort on the first syntax error, whereas:
 .sp 1
 .in +5n
 .nf
@@ -88,7 +91,7 @@ will
 cause
 .B calc
 to try to process each line being read
-despite the errors that it encounters.
+despite the scan/parse errors that it encounters.
 .sp 1
 By default, calc startup resource files are silently
 ignored if not found.
@@ -119,7 +122,7 @@ as if \fBconfig("resource_debug", 0)\fP had been executed.
 For example:
 .sp 1
 .in +5n
-calc 'read qtime; qtime(2)'
+calc "read qtime; qtime(2)"
 .in -5n
 .sp 1
 will output something like:
@@ -135,7 +138,7 @@ whereas:
 .sp 1
 .in +5n
 .nf
-calc -d 'read qtime; qtime(2)'
+calc -d "read qtime; qtime(2)"
 .fi
 .in -5n
 .sp 1
@@ -183,6 +186,80 @@ help config
 Ignore any environment variables on startup.
 The getenv() builtin will still return values, however.
 
+.TP
+.B \-f
+This flag is required when using calc in
+.BR "shell script mode" .
+It must be at the end of the initial
+.B #!
+line of the script.
+.sp 1
+This flag is normally only at the end of a calc shell script.
+If the first line of an executable file begins
+.B #!
+followed by the absolute pathname of the
+.B calc
+program and the flag
+.B \-f
+as in:
+.sp 1
+.in +5n
+.nf
+\fI#!${BINDIR}/calc\fP\ [other_flags\ \&...] \fB\-f\fP
+.fi
+.in -5n
+.sp 1
+the rest of the file will be processed in
+.BR "shell script mode" .
+See
+.B "SHELL SCRIPT MODE"
+section of this man page
+below for details.
+.sp 1
+The actual form of this flag is:
+.sp 1
+.in +5n
+.B \-f
+filename
+.in -5n
+.sp 1
+On systems that treat an executable that begins with
+.B #!
+as a script, the path of the executable is appended by the kernel
+as the final argument to the exec() system call.
+This is why the
+.B \-f
+flag at the very end of the
+.B #!
+line.
+.sp 1
+It is possible use
+.B \-f\ filename
+on the command line:
+.sp 1
+.in +5n
+.nf
+\fIcalc\fP\ [other_flags\ \&...] \fB\-f\fP filename
+.fi
+.in -5n
+.sp 1
+This will cause calc to process lines in
+.B filename
+in
+.BR "shell script mode" .
+.sp 1
+Use of
+.B \-f
+implies
+.BR \-s .
+In addition,
+.B \-d
+and
+.B \-p
+are implied if
+.B \-i
+is not given.
+
 .TP
 .B \-h
 Print a help message.  This option implies
@@ -198,18 +275,14 @@ See
 .TP
 .B \-i
 Become interactive if possible.
-If
-.I calc_cmd
-args are given,
-.B calc
-by default, calc will execute them and exit.
-This flag causes
-.B calc
-to drop into interactive mode after the commands are executed.
 This flag will cause
 .B calc
 to drop into interactive mode after the
-commands are executed.
+.I calc_cmd
+arguments on the command line are evaluated.
+Without this flag,
+.B calc
+will exit after they are evaluated.
 .sp 1
 For example:
 .sp 1
@@ -302,11 +375,22 @@ The reading of key bindings is also disabled
 when the mode disables opening of files for reading.
 
 .TP
-.B \-n
-Use the new configuration defaults instead of the old
-default classic defaults.
+.B \-O
+Use the old classic defaults instead of the
+default configuration.
 This flag as the same effect
-as executing \fBconfig("all", "newcfg")\fP at startup time.
+as executing \fBconfig("all", "oldcfg")\fP at startup time.
+.sp 1
+NOTE: Older versions of calc used
+.B \-n
+to setup a modified form of the default calc configuration.
+The
+.B \-n
+flag currently does nothing.
+Use of the
+.B \-n
+flag is now deprecated and may be used for
+something else in the future.
 
 .TP
 .B \-p
@@ -316,7 +400,7 @@ For example:
 .sp 1
 .in +5n
 .nf
-calc -p '2^21701-1' | fizzbin
+calc -p "2^21701-1" | fizzbin
 .fi
 .in -5n
 .sp 1
@@ -350,6 +434,21 @@ Disable buffering of stdin and stdout.
 Print the
 .B calc
 version number and exit.
+
+.TP
+.B \-\-
+The double dash indicates to calc that no more option follow.
+Thus calc will ignore a later argument on the command line
+even if it starts with a dash.
+This is useful when entering negative values on the command line as in:
+.sp 1
+.in +5n
+.nf
+calc \-p \-\- \-1 - -7
+.sp 1
+.fi
+.in -5n
+
 .PP
 
 \&
@@ -392,32 +491,50 @@ calc 23 + 47
 .fi
 .in -5n
 .sp 1
-should respond with display of 70, but
+will print 70.
+However, command lines will have problems:
 .sp 1
 .in +5n
 .nf
 calc 23 * 47
+.sp 1
+calc -23 + 47
 .fi
 .in -5n
 .sp 1
-may fail.
-Such cases can usually be made to work as expected by
-enclosing the command between single marks as in:
+The first example above fails because the shell interprets the '*'
+as a file glob.
+The second example fails because '\-23' is viewed as a calc option
+(which it is not) and do calc objects to that it thinks of as an unknown option.
+These cases can usually be made to work as expected by
+enclosing the command between quotes:
 .sp 1
 .in +5n
 .nf
 calc '23 * 47'
+.sp 1
+calc "print sqrt(2), exp(1)"
 .fi
 .in -5n
 .sp 1
-and
+or in parentheses and quotes to avoid leading \-'s as in:
 .sp 1
 .in +5n
 .nf
-calc 'print sqrt(2), exp(1)'
+calc '(-23 + 47)'
 .fi
 .in -5n
-.sp
+.sp 1
+One may also use a double dash to denote that calc options have ended as in:
+.sp 1
+.in +5n
+.nf
+calc -- -23 + 47
+.sp 1
+calc -q -- -23 + 47
+.fi
+.in -5n
+.sp 1
 If '!' is to be used to indicate the factorial function, for
 shells like
 .BI csh (1)
@@ -514,8 +631,8 @@ searches in succession:
 ./myfile.cal
 ${LIBDIR}/myfile
 ${LIBDIR}/myfile.cal
-${CUSTOMLIBDIR}/myfile
-${CUSTOMLIBDIR}/myfile.cal
+${CUSTOMCALDIR}/myfile
+${CUSTOMCALDIR}/myfile.cal
 .fi
 .in -5n
 .sp 1
@@ -567,32 +684,30 @@ help config
 .br
 SHELL SCRIPT MODE
 .PP
-If first line of an executable file begins
+If the first line of an executable file begins
 .B #!
 followed by the absolute pathname of the
 .B calc
 program and the flag
-.B \-S
+.B \-f
 as in:
 .sp 1
 .in +5n
 .nf
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ [other_flags\ \&...]
+\fI#!${BINDIR}/calc\fP\ [other_flags\ \&...] \fB\-f\fP
 .fi
 .in -5n
 .sp 1
 the rest of the file will be processed in
 .BR "shell script mode" .
 Note that
-.B \-S
-(UPPER CASE
-.BR \-S )
-must be the first \-flag on the ``#!'' line.
+.B \-f
+must at the end of the initial ``#!'' line.
 Any other optional
 .B "other_flags"
-must come after
+must come before
 the
-.BR \-S .
+.BR \-f .
 .sp 1
 In
 .B "shell script mode"
@@ -608,8 +723,6 @@ the later lines within the script itself.
 In
 .BR "shell script mode" ,
 .B \-s
-(lower case
-.BR \-s )
 is always assumed.
 In addition,
 .B \-d
@@ -625,7 +738,7 @@ the file
 .sp 1
 .in +5n
 .nf
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ \&\fB\-q\fP
+\fI#!${BINDIR}/calc\fP\ \&\fB\-q\fP \fB\-f\fP
 #
 # mersenne - an example of a calc \fBshell script file\fP
 
@@ -839,7 +952,7 @@ ${LIBDIR}/bindings
 non-GNU-readline command line editor bindings
 .sp 1
 .TP 5
-${INCDIRCALC}/*.h
+${CALC_INCDIR}/*.h
 include files for C interface use
 .sp 1
 .TP 5
@@ -851,7 +964,7 @@ ${LIBDIR}/libcustcalc.a
 custom binary link library
 .sp 1
 .TP 5
-${CUSTOMLIBDIR}/*.cal
+${CUSTOMCALDIR}/*.cal
 custom resource files
 .sp 1
 .TP 5
@@ -961,9 +1074,9 @@ If you do not have these files, write to:
 .in +0.5i
 .nf
 Free Software Foundation, Inc.
-59 Temple Place
-Suite 330
-Boston, MA  02111-1307
+51 Franklin Street
+Fifth Floor
+Boston, MA  02110-1301
 USA
 .fi
 .in -0.5i
@@ -994,25 +1107,58 @@ Copyright (C) 1999  Landon Curt Noll
 and is covered under version 2.1 GNU Lesser General
 Public License.
 .sp
-.SH "BUG REPORTS / BUG FIXES / ENHANCEMENTS"
+.SH "CALC MAILING LIST / CALC UPDATES / ENHANCEMENTS"
 \&
 .br
 .sp
-Send comments, suggestions, bug fixes, enhancements
+To contribute comments, suggestions, enhancements
 and interesting
 .B calc
-resource files,
-.B calc
-shell scripts that you would like you see included
-in future distributions to:
+resource files, and
+shell scripts please join the low volume calc mailing list.
+.sp
+To join the low volume calc mailing list, send EMail to:
 .sp
 .in +0.5i
 .nf
-calc-contrib at asthe dot com
+calc-tester-request at asthe dot com
 .fi
 .in -0.5i
 .sp
-Bug reports are sent to:
+Your subject must contain the words:
+.sp
+.in +0.5i
+.nf
+calc mailing list subscription
+.fi
+.in -0.5i
+.sp
+You may have additional words in your subject line.
+.sp
+Your message body must contain:
+.sp
+.in +0.5i
+.nf
+subscribe calc-tester address
+end
+name your_full_name
+.fi
+.in -0.5i
+.sp
+where
+.B address
+s your EMail address and
+.B your_full_name
+is your full name.
+Feel free to follow the
+.B name
+line with additional EMail text as desired.
+.sp
+.SH "BUG REPORTS / BUG FIXES"
+\&
+.br
+.sp
+Send bug reports and bug fixes to:
 .sp
 .in +0.5i
 .nf
@@ -1023,6 +1169,16 @@ calc-bugs at asthe dot com
 .fi
 .in -0.5i
 .sp
+Your subject must contain the words:
+.sp
+.in +0.5i
+.nf
+calc bug report
+.fi
+.in -0.5i
+.sp
+You may have additional words in your subject line.
+.sp
 See the
 .I BUGS
 source file or use the
@@ -1037,7 +1193,7 @@ help bugs
 .sp
 for more information about bug reporting.
 .sp
-.SH "CALC WEB SITE / MAILING LIST"
+.SH "CALC WEB SITE"
 \&
 .br
 Landon Noll maintains the the
@@ -1045,33 +1201,7 @@ Landon Noll maintains the the
 web site is located at:
 .sp
 .in +0.5i
-http://www.isthe.com/chongo/tech/comp/calc/
+www.isthe.com/chongo/tech/comp/calc/
 .in -0.5i
 .sp
-One may join the
-.B calc
-testing group by sending a request to:
-.sp
-.in +0.5i
-.nf
-calc-tester-request at asthe dot com
-
-[[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-[[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
-.fi
-.in -0.5i
-.sp
-Your message body (not the subject) should consist of:
-.sp
-.in +0.5i
-.nf
-subscribe calc-tester address
-end
-name your_full_name
-.fi
-.in -0.5i
-.sp
-where "address" is your EMail address and "your_full_name"
-is your full name.
-.sp
 Share and Enjoy! :\-)

calc.spec.in

@@ -0,0 +1,163 @@
+#****h* calc/calc.spec.in
+#
+# calc.spec.in - template specfile for calc
+#
+# Copyright (C) 2003-2007  Petteri Kettunen and Landon Curt Noll
+#
+# Calc is open software; you can redistribute it and/or modify it under
+# the terms of the version 2.1 of the GNU Lesser General Public License
+# as published by the Free Software Foundation.
+#
+# Calc is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+# Public License for more details.
+#
+# A copy of version 2.1 of the GNU Lesser General Public License is
+# distributed with calc under the filename COPYING-LGPL.  You should have
+# received a copy with calc; if not, write to Free Software Foundation, Inc.
+# 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+#
+# @(#) $Revision: 30.6 $
+# @(#) $Id: calc.spec.in,v 30.6 2007/10/16 12:22:22 chongo Exp $
+# @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.spec.in,v $
+#
+# Under source code control:	2003/02/16 20:21:39
+# File existed as early as:	2003
+#
+# calculator by David I. Bell with help/mods from others
+# Makefile by Petteri Kettunen with modifications from Landon Curt Noll
+
+# BUGS
+#  - Uninstalling calc and calc-devel leaves empty dirs /usr/include/calc
+#    and /usr/share/calc and its subdirs. In case e.g. %{_includedir}/calc
+#    is defined in `%files devel' section, then rpmbuild complains that
+#    header files are defined twice - rpmbuild bug or bug in specfile conf???
+
+Summary: Arbitrary precision calculator.
+Name: calc
+Version: <<<PROJECT_VERSION>>>
+Release: 1.1
+License: LGPL
+Group: Applications/Engineering
+Source: %{name}-%{version}.tar.bz2
+URL: http://www.isthe.com/chongo/tech/comp/calc/index.html
+Requires: ncurses >= 5.2-26, readline >= 4.2, less >= 358
+BuildRequires: ncurses-devel >= 5.2-26, readline-devel >= 4.2
+BuildRoot: %{_tmppath}/%{name}-root
+
+%description
+Calc is arbitrary precision C-like arithmetic system that is a
+calculator, an algorithm prototype and mathematical research
+tool. Calc comes with a rich set of builtin mathematical and
+programmatic functions.
+
+For the latest calc release, see the calc project home page:
+
+    http://www.isthe.com/chongo/tech/comp/calc/index.html
+
+%package devel
+Summary: Development files and documentation for calc.
+Group: Development/Libraries
+PreReq: %{name} = %{version}-%{release}
+
+%description devel
+This package contains the header files and static libraries for developing
+calc (arbitrary precision calculator).
+
+For the latest calc release, see the project home page:
+
+    http://www.isthe.com/chongo/tech/comp/calc/index.html
+
+%prep
+%setup -q
+
+%build
+echo '-=- calc.spec beginning make clobber -=-'
+make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 EXT= V=@ clobber
+echo '-=- calc.spec ending make clobber -=-'
+echo '-=- calc.spec beginning make calc-static-only -=-'
+make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 EXT= V=@ calc-static-only BLD_TYPE=calc-static-only
+echo '-=- calc.spec ending make calc-static-only -=-'
+echo '-=- calc.spec beginning make rpm-hide-static -=-'
+make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 EXT= V=@ rpm-hide-static
+echo '-=- calc.spec ending make rpm-hide-static -=-'
+echo '-=- calc.spec beginning make clobber (again) -=-'
+make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 EXT= V=@ clobber
+echo '-=- calc.spec ending make clobber (again) -=-'
+echo '-=- calc.spec beginning make calc-dynamic-only -=-'
+make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 EXT= V=@ calc-dynamic-only BLD_TYPE=calc-dynamic-only LD_SHARE=
+echo '-=- calc.spec ending make calc-dynamic-only -=-'
+echo '-=- calc.spec beginning make chk -=-'
+make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 EXT= V=@ chk
+echo '-=- calc.spec ending make chk -=-'
+echo '-=- calc.spec beginning make rpm-unhide-static -=-'
+make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 EXT= V=@ rpm-unhide-static
+echo '-=- calc.spec ending make rpm-unhide-static -=-'
+echo '-=- calc.spec beginning make rpm-clean-static -=-'
+make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 EXT= V=@ rpm-clean-static
+echo '-=- calc.spec ending make rpm-clean-static -=-'
+echo '-=- calc.spec beginning make rpm-chk-static -=-'
+make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 EXT= V=@ rpm-chk-static
+echo '-=- calc.spec ending make rpm-chk-static -=-'
+
+%install
+rm -rf %{buildroot}
+mkdir -p %{buildroot}
+echo '-=- calc.spec beginning make install -=-'
+make T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 EXT= V=@ install
+echo '-=- calc.spec ending make install -=-'
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-, root, root)
+%doc BUGS CHANGES COPYING COPYING-LGPL
+%attr(755, root, root) %{_bindir}/calc
+%attr(755, root, root) %{_bindir}/cscript/*
+%attr(644, root, root) %{_mandir}/man1/calc.1.gz
+%attr(644, root, root) %{_datadir}/%{name}/README
+%attr(644, root, root) %{_datadir}/%{name}/bindings
+%attr(644, root, root) %{_datadir}/%{name}/custhelp/*
+%attr(644, root, root) %{_datadir}/%{name}/custom/*.cal
+%attr(644, root, root) %{_datadir}/%{name}/help/*
+%attr(644, root, root) %{_datadir}/%{name}/*.cal
+%attr(644, root, root) %{_datadir}/%{name}/*.line
+%attr(644, root, root) %{_libdir}/libcalc.so.%{version}
+%attr(644, root, root) %{_libdir}/libcustcalc.so.%{version}
+
+%files devel
+%defattr(-, root, root)
+%doc BUGS COPYING COPYING-LGPL LIBRARY
+%attr(755, root, root) %{_bindir}/calc-static
+%attr(644, root, root) %{_includedir}/calc/*
+%attr(644, root, root) %{_libdir}/libcalc.a
+%attr(644, root, root) %{_libdir}/libcustcalc.a
+
+%changelog
+* Sun Sep 01 2007 Landon Curt Noll http://www.isthe.com/chongo
+- Release of calc-2.12.2
+- Calc builds with shared libraries
+* Sun Jun 25 2006 Landon Curt Noll http://www.isthe.com/chongo
+- Changed Copyright to License as per new rpm v4.4 syntax
+* Sun May 20 2006 Landon Curt Noll http://www.isthe.com/chongo
+- Release of calc-2.12.0
+- Added *.line set files to the list of packaged files
+* Sun Dec 11 2005 Landon Curt Noll http://www.isthe.com/chongo
+- Release of calc-2.11.11
+- Fixed description in spec file
+* Wed Feb 26 2003 Landon Curt Noll http://www.isthe.com/chongo
+- Release of calc-2.11.7-2
+- Fixed attributes on include and lib calc-devel files
+- Added BUGS to calc-devel as well as calc
+* Tue Feb 25 2003 Landon Curt Noll http://www.isthe.com/chongo
+- Release of calc-2.11.7-1
+- Require ncurses, readline and less to install.
+- Require ncurses-devel and readline-devel to build.
+* Tue Feb 18 2003 Landon Curt Noll http://www.isthe.com/chongo
+- Misc changes to fit local directory setup
+* Sun Feb 16 2003 Petteri Kettunen <petterik@users.sourceforge.net>
+- initial RPM build
+
+#****

calcerr.tbl

@@ -1,7 +1,7 @@
 #
 # calcerr - error codes and messages
 #
-# Copyright (C) 1999  Ernest Bowen
+# Copyright (C) 1999-2006  Ernest Bowen
 #
 # Calc is open software; you can redistribute it and/or modify it under
 # the terms of the version 2.1 of the GNU Lesser General Public License
@@ -15,10 +15,10 @@
 # A copy of version 2.1 of the GNU Lesser General Public License is
 # distributed with calc under the filename COPYING-LGPL.  You should have
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
-# 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+# 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 29.4 $
-# @(#) $Id: calcerr.tbl,v 29.4 2001/04/10 22:06:46 chongo Exp $
+# @(#) $Revision: 30.1 $
+# @(#) $Id: calcerr.tbl,v 30.1 2007/03/16 11:09:46 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/calcerr.tbl,v $
 #
 # Under source code control:	1996/05/23 17:38:44
@@ -164,7 +164,7 @@ E_RSEARCH3	Bad third argument for rsearch
 E_RSEARCH4	Bad fourth argument for rsearch
 E_RSEARCH5	Cannot find fsize or fpos for rsearch
 E_RSEARCH6	File not readable for rsearch
-E_FOPEN3	Too many open files
+E_MANYOPEN	Too many open files
 E_REWIND2	Attempt to rewind a file that is not open
 E_STRERROR1	Bad argument type for strerror
 E_STRERROR2	Index out of range for strerror
@@ -260,14 +260,14 @@ E_COPY13	No-copy-from source variable
 E_COPY14	No-copy-to destination variable
 E_COPY15	No-copy-from source named block
 E_COPY16	No-copy-to destination named block
-E_COPY17	No-relocation destination for copy
+E_COPY17	No-relocate destination for copy
 E_COPYF1	File not open for copy
 E_COPYF2	fseek or fsize failure for copy
 E_COPYF3	fwrite error for copy
 E_COPYF4	fread error for copy
 E_PROTECT1	Non-variable first argument for protect
-E_PROTECT2	Non-integer second argument for protect
-E_PROTECT3	Out-of-range second argument for protect
+E_PROTECT2	Bad second argument for protect
+E_PROTECT3	Bad third argument for protect
 E_MATFILL3	No-copy-to destination for matfill
 E_MATFILL4	No-assign-from source for matfill
 E_MATTRACE1	Non-matrix argument for mattrace
@@ -393,3 +393,59 @@ E_BERN		Bad argument for bern
 E_EULER		Bad argument for euler
 E_SLEEP		Bad argument for sleep
 E_TTY		calc_tty failure
+E_ASSIGN1	No-copy-to destination for octet assign
+E_ASSIGN2	No-copy-from source for octet assign
+E_ASSIGN3	No-change destination for octet assign
+E_ASSIGN4	Non-variable destination for assign
+E_ASSIGN5	No-assign-to destination for assign
+E_ASSIGN6	No-assign-from source for assign
+E_ASSIGN7	No-change destination for assign
+E_ASSIGN8	No-type-change destination for assign
+E_ASSIGN9	No-error-value destination for assign
+E_SWAP1		No-copy argument for octet swap
+E_SWAP2		No-assign-to-or-from argument for swap
+E_SWAP3		Non-lvalue argument for swap
+E_QUOMOD1	Non-lvalue argument 3 or 4 for quomod
+E_QUOMOD2	Non-real-number arg 1 or 2 or bad arg 5 for quomod
+E_QUOMOD3	No-assign-to argument 3 or 4 for quomod
+E_PREINC1	No-copy-to or no-change argument for octet preinc
+E_PREINC2	Non-variable argument for preinc
+E_PREINC3	No-assign-to or no-change argument for preinc
+E_PREDEC1	No-copy-to or no-change argument for octet predec
+E_PREDEC2	Non-variable argument for predec
+E_PREDEC3	No-assign-to or no-change argument for predec
+E_POSTINC1	No-copy-to or no-change argument for octet postinc
+E_POSTINC2	Non-variable argument for postinc
+E_POSTINC3	No-assign-to or no-change argument for postinc
+E_POSTDEC1	No-copy-to or no-change argument for octet postdec
+E_POSTDEC2	Non-variable argument for postdec
+E_POSTDEC3	No-assign-to or no-change argument for postdec
+E_INIT1		Error-type structure for initialization
+E_INIT2		No-copy-to structure for initialization
+E_INIT3		Too many initializer values
+E_INIT4		Attempt to initialize freed named block
+E_INIT5		Bad structure type for initialization
+E_INIT6		No-assign-to element for initialization
+E_INIT7		No-change element for initialization
+E_INIT8		No-type-change element for initialization
+E_INIT9		No-error-value element for initialization
+E_INIT10	No-assign-or-copy-from source for initialization
+E_LIST1		No-relocate for list insert
+E_LIST2		No-relocate for list delete
+E_LIST3		No-relocate for list push
+E_LIST4		No-relocate for list append
+E_LIST5		No-relocate for list pop
+E_LIST6		No-relocate for list remove
+E_MODIFY1	Non-variable first argument for modify
+E_MODIFY2	Non-string second argument for modify
+E_MODIFY3	No-change first argument for modify
+E_MODIFY4	Undefined function for modify
+E_MODIFY5	Unacceptable type first argument for modify
+E_FPATHOPEN1	Non-string arguments for fpathopen
+E_FPATHOPEN2	Unrecognized mode for fpathopen
+E_LOG1		Bad epsilon argument for log
+E_LOG2		Non-numeric first argument for log
+E_FGETFILE1	Non-file argument for fgetfile
+E_FGETFILE2	File argument for fgetfile not open for reading
+E_FGETFILE3	Unable to set file position in fgetfile
+E_ESTR		Non-representable type for estr

calcerr_c.awk

@@ -16,10 +16,10 @@
 # A copy of version 2.1 of the GNU Lesser General Public License is
 # distributed with calc under the filename COPYING-LGPL.  You should have
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
-# 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+# 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 29.2 $
-# @(#) $Id: calcerr_c.awk,v 29.2 2000/06/07 14:02:13 chongo Exp $
+# @(#) $Revision: 30.1 $
+# @(#) $Id: calcerr_c.awk,v 30.1 2007/03/16 11:09:46 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/calcerr_c.awk,v $
 #
 # Under source code control:	1996/05/24 03:15:35

calcerr_c.sed

@@ -16,10 +16,10 @@
 # A copy of version 2.1 of the GNU Lesser General Public License is
 # distributed with calc under the filename COPYING-LGPL.  You should have
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
-# 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+# 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 29.2 $
-# @(#) $Id: calcerr_c.sed,v 29.2 2000/06/07 14:02:13 chongo Exp $
+# @(#) $Revision: 30.1 $
+# @(#) $Id: calcerr_c.sed,v 30.1 2007/03/16 11:09:46 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/calcerr_c.sed,v $
 #
 # Under source code control:	1996/05/24 03:15:35

calcerr_h.awk

@@ -16,10 +16,10 @@
 # A copy of version 2.1 of the GNU Lesser General Public License is
 # distributed with calc under the filename COPYING-LGPL.  You should have
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
-# 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+# 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 29.2 $
-# @(#) $Id: calcerr_h.awk,v 29.2 2000/06/07 14:02:13 chongo Exp $
+# @(#) $Revision: 30.1 $
+# @(#) $Id: calcerr_h.awk,v 30.1 2007/03/16 11:09:46 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/calcerr_h.awk,v $
 #
 # Under source code control:	1996/05/23 17:38:44

calcerr_h.sed

@@ -16,10 +16,10 @@
 # A copy of version 2.1 of the GNU Lesser General Public License is
 # distributed with calc under the filename COPYING-LGPL.  You should have
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
-# 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+# 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 29.2 $
-# @(#) $Id: calcerr_h.sed,v 29.2 2000/06/07 14:02:13 chongo Exp $
+# @(#) $Revision: 30.1 $
+# @(#) $Id: calcerr_h.sed,v 30.1 2007/03/16 11:09:46 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/calcerr_h.sed,v $
 #
 # Under source code control:	1996/05/23 17:38:44

check.awk

@@ -2,7 +2,7 @@
 #
 # check - check the regression output for problems
 #
-# Copyright (C) 1999  Landon Curt Noll
+# Copyright (C) 1999-2006  Landon Curt Noll
 #
 # Calc is open software; you can redistribute it and/or modify it under
 # the terms of the version 2.1 of the GNU Lesser General Public License
@@ -16,10 +16,10 @@
 # A copy of version 2.1 of the GNU Lesser General Public License is
 # distributed with calc under the filename COPYING-LGPL.  You should have
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
-# 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+# 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
-# @(#) $Revision: 29.2 $
-# @(#) $Id: check.awk,v 29.2 2000/06/07 14:02:13 chongo Exp $
+# @(#) $Revision: 30.1 $
+# @(#) $Id: check.awk,v 30.1 2007/03/16 11:09:46 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/check.awk,v $
 #
 # Under source code control:	1996/05/25 22:07:58
@@ -64,7 +64,7 @@ NF == 0 {
 	end_seen = 1;
 }
 
-$1 ~ /^[0-9]+:/ {
+$1 ~ /^[0-9]+:/ || $1 ~ /^[0-9]+-[0-9]*:/ || $1 ~ /^"\)\)$/ {
 	if (error > 0) {
 		if (havebuf2) {
 			print buf2;

cmath.h

@@ -1,7 +1,7 @@
 /*
  * cmath - data structures for extended precision complex arithmetic
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 1999-2007  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -15,10 +15,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: cmath.h,v 29.3 2000/07/17 15:35:49 chongo Exp $
+ * @(#) $Revision: 30.1 $
+ * @(#) $Id: cmath.h,v 30.1 2007/03/16 11:09:46 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/cmath.h,v $
  *
  * Under source code control:	1993/07/30 19:42:45
@@ -32,7 +32,11 @@
 #define __CMATH_H__
 
 
-#include "qmath.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "qmath.h"
+#else
+# include <calc/qmath.h>
+#endif
 
 
 /*
@@ -48,82 +52,84 @@ typedef struct {
 /*
  * Input, output, and conversion routines.
  */
-extern COMPLEX *comalloc(void);
-extern COMPLEX *qqtoc(NUMBER *q1, NUMBER *q2);
-extern void comfree(COMPLEX *c);
-extern void comprint(COMPLEX *c);
-extern void cprintfr(COMPLEX *c);
+E_FUNC COMPLEX *comalloc(void);
+E_FUNC COMPLEX *qqtoc(NUMBER *q1, NUMBER *q2);
+E_FUNC void comfree(COMPLEX *c);
+E_FUNC void comprint(COMPLEX *c);
+E_FUNC void cprintfr(COMPLEX *c);
 
 
 /*
  * Basic numeric routines.
  */
-extern COMPLEX *cadd(COMPLEX *c1, COMPLEX *c2);
-extern COMPLEX *csub(COMPLEX *c1, COMPLEX *c2);
-extern COMPLEX *cmul(COMPLEX *c1, COMPLEX *c2);
-extern COMPLEX *cdiv(COMPLEX *c1, COMPLEX *c2);
-extern COMPLEX *caddq(COMPLEX *c, NUMBER *q);
-extern COMPLEX *csubq(COMPLEX *c, NUMBER *q);
-extern COMPLEX *cmulq(COMPLEX *c, NUMBER *q);
-extern COMPLEX *cdivq(COMPLEX *c, NUMBER *q);
-extern COMPLEX *cscale(COMPLEX *c, long i);
-extern COMPLEX *cshift(COMPLEX *c, long i);
-extern COMPLEX *csquare(COMPLEX *c);
-extern COMPLEX *cconj(COMPLEX *c);
-extern COMPLEX *creal(COMPLEX *c);
-extern COMPLEX *cimag(COMPLEX *c);
-extern COMPLEX *cneg(COMPLEX *c);
-extern COMPLEX *cinv(COMPLEX *c);
-extern COMPLEX *cint(COMPLEX *c);
-extern COMPLEX *cfrac(COMPLEX *c);
-extern BOOL ccmp(COMPLEX *c1, COMPLEX *c2);
+
+E_FUNC COMPLEX *c_add(COMPLEX *c1, COMPLEX *c2);
+E_FUNC COMPLEX *c_sub(COMPLEX *c1, COMPLEX *c2);
+E_FUNC COMPLEX *c_mul(COMPLEX *c1, COMPLEX *c2);
+E_FUNC COMPLEX *c_div(COMPLEX *c1, COMPLEX *c2);
+E_FUNC COMPLEX *c_addq(COMPLEX *c, NUMBER *q);
+E_FUNC COMPLEX *c_subq(COMPLEX *c, NUMBER *q);
+E_FUNC COMPLEX *c_mulq(COMPLEX *c, NUMBER *q);
+E_FUNC COMPLEX *c_divq(COMPLEX *c, NUMBER *q);
+E_FUNC COMPLEX *c_scale(COMPLEX *c, long i);
+E_FUNC COMPLEX *c_shift(COMPLEX *c, long i);
+E_FUNC COMPLEX *c_square(COMPLEX *c);
+E_FUNC COMPLEX *c_conj(COMPLEX *c);
+E_FUNC COMPLEX *c_real(COMPLEX *c);
+E_FUNC COMPLEX *c_imag(COMPLEX *c);
+E_FUNC COMPLEX *c_neg(COMPLEX *c);
+E_FUNC COMPLEX *c_inv(COMPLEX *c);
+E_FUNC COMPLEX *c_int(COMPLEX *c);
+E_FUNC COMPLEX *c_frac(COMPLEX *c);
+E_FUNC BOOL c_cmp(COMPLEX *c1, COMPLEX *c2);
 
 
 /*
  * More complicated functions.
  */
-extern COMPLEX *cpowi(COMPLEX *c, NUMBER *q);
-extern NUMBER *cilog(COMPLEX *c, ZVALUE base);
+E_FUNC COMPLEX *c_powi(COMPLEX *c, NUMBER *q);
+E_FUNC NUMBER *c_ilog(COMPLEX *c, ZVALUE base);
 
 
 /*
  * Transcendental routines.  These all take an epsilon argument to
  * specify how accurately these are to be calculated.
  */
-extern COMPLEX *cpower(COMPLEX *c1, COMPLEX *c2, NUMBER *epsilon);
-extern COMPLEX *csqrt(COMPLEX *c, NUMBER *epsilon, long R);
-extern COMPLEX *croot(COMPLEX *c, NUMBER *q, NUMBER *epsilon);
-extern COMPLEX *cexp(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cln(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *ccos(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *csin(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *ccosh(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *csinh(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cpolar(NUMBER *q1, NUMBER *q2, NUMBER *epsilon);
-extern COMPLEX *crel(COMPLEX *c1, COMPLEX *c2);
-extern COMPLEX *casin(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cacos(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *catan(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cacot(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *casec(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cacsc(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *casinh(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cacosh(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *catanh(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cacoth(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *casech(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cacsch(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cgd(COMPLEX *c, NUMBER *epsilon);
-extern COMPLEX *cagd(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_power(COMPLEX *c1, COMPLEX *c2, NUMBER *epsilon);
+E_FUNC COMPLEX *c_sqrt(COMPLEX *c, NUMBER *epsilon, long R);
+E_FUNC COMPLEX *c_root(COMPLEX *c, NUMBER *q, NUMBER *epsilon);
+E_FUNC COMPLEX *c_exp(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_ln(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_log(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_cos(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_sin(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_cosh(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_sinh(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_polar(NUMBER *q1, NUMBER *q2, NUMBER *epsilon);
+E_FUNC COMPLEX *c_rel(COMPLEX *c1, COMPLEX *c2);
+E_FUNC COMPLEX *c_asin(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_acos(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_atan(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_acot(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_asec(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_acsc(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_asinh(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_acosh(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_atanh(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_acoth(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_asech(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_acsch(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_gd(COMPLEX *c, NUMBER *epsilon);
+E_FUNC COMPLEX *c_agd(COMPLEX *c, NUMBER *epsilon);
 
 
 
 /*
  * external functions
  */
-extern COMPLEX *swap_b8_in_COMPLEX(COMPLEX *dest, COMPLEX *src, BOOL all);
-extern COMPLEX *swap_b16_in_COMPLEX(COMPLEX *dest, COMPLEX *src, BOOL all);
-extern COMPLEX *swap_HALF_in_COMPLEX(COMPLEX *dest, COMPLEX *src, BOOL all);
+E_FUNC COMPLEX *swap_b8_in_COMPLEX(COMPLEX *dest, COMPLEX *src, BOOL all);
+E_FUNC COMPLEX *swap_b16_in_COMPLEX(COMPLEX *dest, COMPLEX *src, BOOL all);
+E_FUNC COMPLEX *swap_HALF_in_COMPLEX(COMPLEX *dest, COMPLEX *src, BOOL all);
 
 
 /*
@@ -147,7 +153,7 @@ extern COMPLEX *swap_HALF_in_COMPLEX(COMPLEX *dest, COMPLEX *src, BOOL all);
 /*
  * Pre-defined values.
  */
-extern COMPLEX _czero_, _cone_, _conei_;
+EXTERN COMPLEX _czero_, _cone_, _conei_;
 
 
 #endif /* !__CMATH_H__ */

comfunc.c

@@ -1,7 +1,7 @@
 /*
  * comfunc - extended precision complex arithmetic non-primitive routines
  *
- * Copyright (C) 1999  David I. Bell and Ernest Bowen
+ * Copyright (C) 1999-2007  David I. Bell and Ernest Bowen
  *
  * Primary author:  David I. Bell
  *
@@ -17,10 +17,10 @@
  * A copy of version 2.1 of the GNU Lesser General Public License is
  * distributed with calc under the filename COPYING-LGPL.  You should have
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
- * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: comfunc.c,v 29.3 2000/07/17 15:35:49 chongo Exp $
+ * @(#) $Revision: 30.3 $
+ * @(#) $Id: comfunc.c,v 30.3 2008/10/24 07:09:41 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/comfunc.c,v $
  *
  * Under source code control:	1990/02/15 01:48:13
@@ -33,6 +33,16 @@
 #include "config.h"
 #include "cmath.h"
 
+/*
+ * cache the natural logarithm of 10
+ */
+STATIC COMPLEX *cln_10 = NULL;
+STATIC NUMBER *cln_10_epsilon = NULL;
+STATIC NUMBER _q10_ = { { _tenval_, 1, 0 }, { _oneval_, 1, 0 }, 1, NULL };
+STATIC NUMBER _q0_ = { { _zeroval_, 1, 0 }, { _oneval_, 1, 0 }, 1, NULL };
+COMPLEX _cten_ = { &_q10_, &_q0_, 1 };
+
+
 /*
  * Compute the result of raising a complex number to an integer power.
  *
@@ -41,7 +51,7 @@
  *	q		power to raise it to
  */
 COMPLEX *
-cpowi(COMPLEX *c, NUMBER *q)
+c_powi(COMPLEX *c, NUMBER *q)
 {
 	COMPLEX *tmp, *res;	/* temporary values */
 	long power;		/* power to raise to */
@@ -69,29 +79,29 @@ cpowi(COMPLEX *c, NUMBER *q)
 	 */
 	if (power <= 4) {
 		switch ((int) (power * sign)) {
-			case 0:
-				return clink(&_cone_);
-			case 1:
-				return clink(c);
-			case -1:
-				return cinv(c);
-			case 2:
-				return csquare(c);
-			case -2:
-				tmp = csquare(c);
-				res = cinv(tmp);
-				comfree(tmp);
-				return res;
-			case 3:
-				tmp = csquare(c);
-				res = cmul(c, tmp);
-				comfree(tmp);
-				return res;
-			case 4:
-				tmp = csquare(c);
-				res = csquare(tmp);
-				comfree(tmp);
-				return res;
+		case 0:
+			return clink(&_cone_);
+		case 1:
+			return clink(c);
+		case -1:
+			return c_inv(c);
+		case 2:
+			return c_square(c);
+		case -2:
+			tmp = c_square(c);
+			res = c_inv(tmp);
+			comfree(tmp);
+			return res;
+		case 3:
+			tmp = c_square(c);
+			res = c_mul(c, tmp);
+			comfree(tmp);
+			return res;
+		case 4:
+			tmp = c_square(c);
+			res = c_square(tmp);
+			comfree(tmp);
+			return res;
 		}
 	}
 	/*
@@ -102,26 +112,26 @@ cpowi(COMPLEX *c, NUMBER *q)
 	while ((bit & power) == 0)
 		bit >>= 1L;
 	bit >>= 1L;
-	res = csquare(c);
+	res = c_square(c);
 	if (bit & power) {
-		tmp = cmul(res, c);
+		tmp = c_mul(res, c);
 		comfree(res);
 		res = tmp;
 	}
 	bit >>= 1L;
 	while (bit) {
-		tmp = csquare(res);
+		tmp = c_square(res);
 		comfree(res);
 		res = tmp;
 		if (bit & power) {
-			tmp = cmul(res, c);
+			tmp = c_mul(res, c);
 			comfree(res);
 			res = tmp;
 		}
 		bit >>= 1L;
 	}
 	if (sign < 0) {
-		tmp = cinv(res);
+		tmp = c_inv(res);
 		comfree(res);
 		res = tmp;
 	}
@@ -134,7 +144,7 @@ cpowi(COMPLEX *c, NUMBER *q)
  * Type of rounding of each component specified by R as for qsqrt().
  */
 COMPLEX *
-csqrt(COMPLEX *c, NUMBER *epsilon, long R)
+c_sqrt(COMPLEX *c, NUMBER *epsilon, long R)
 {
 	COMPLEX *r;
 	NUMBER *es, *aes, *bes, *u, *v, qtemp;
@@ -363,7 +373,7 @@ csqrt(COMPLEX *c, NUMBER *epsilon, long R)
  * Each component of the result is within the specified error.
  */
 COMPLEX *
-croot(COMPLEX *c, NUMBER *q, NUMBER *epsilon)
+c_root(COMPLEX *c, NUMBER *q, NUMBER *epsilon)
 {
 	COMPLEX *r;
 	NUMBER *a2pb2, *root, *tmp1, *tmp2, *epsilon2;
@@ -376,7 +386,7 @@ croot(COMPLEX *c, NUMBER *q, NUMBER *epsilon)
 	if (cisone(c) || qisone(q))
 		return clink(c);
 	if (qistwo(q))
-		return csqrt(c, epsilon, 24L);
+		return c_sqrt(c, epsilon, 24L);
 	if (cisreal(c) && !qisneg(c->real)) {
 		tmp1 = qroot(c->real, q, epsilon);
 		if (tmp1 == NULL)
@@ -388,8 +398,8 @@ croot(COMPLEX *c, NUMBER *q, NUMBER *epsilon)
 	}
 	/*
 	 * Calculate the root using the formula:
-	 *	croot(a + bi, n) =
-	 *		cpolar(qroot(a^2 + b^2, 2 * n), qatan2(b, a) / n).
+	 *	c_root(a + bi, n) =
+	 *		c_polar(qroot(a^2 + b^2, 2 * n), qatan2(b, a) / n).
 	 */
 	n = qilog2(epsilon);
 	epsilon2 = qbitvalue(n - 4);
@@ -415,7 +425,7 @@ croot(COMPLEX *c, NUMBER *q, NUMBER *epsilon)
 	qfree(epsilon2);
 	tmp2 = qqdiv(tmp1, q);
 	qfree(tmp1);
-	r = cpolar(root, tmp2, epsilon);
+	r = c_polar(root, tmp2, epsilon);
 	qfree(root);
 	qfree(tmp2);
 	return r;
@@ -428,7 +438,7 @@ croot(COMPLEX *c, NUMBER *q, NUMBER *epsilon)
  *	exp(a + bi) = exp(a) * (cos(b) + i * sin(b)).
  */
 COMPLEX *
-cexp(COMPLEX *c, NUMBER *epsilon)
+c_exp(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *r;
 	NUMBER *sin, *cos, *tmp1, *tmp2, *epsilon1;
@@ -485,13 +495,13 @@ cexp(COMPLEX *c, NUMBER *epsilon)
  *	ln(a + bi) = ln(a^2 + b^2) / 2 + i * atan2(b, a).
  */
 COMPLEX *
-cln(COMPLEX *c, NUMBER *epsilon)
+c_ln(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *r;
 	NUMBER *a2b2, *tmp1, *tmp2, *epsilon1;
 
 	if (ciszero(c)) {
-		math_error("Logarithm of zero");
+		math_error("logarithm of zero");
 		/*NOTREACHED*/
 	}
 	if (cisone(c))
@@ -519,6 +529,60 @@ cln(COMPLEX *c, NUMBER *epsilon)
 	return r;
 }
 
+/*
+ * Calculate base 10 logarithm by:
+ *
+ *	log(c) = ln(c) / ln(10)
+ */
+COMPLEX *
+c_log(COMPLEX *c, NUMBER *epsilon)
+{
+	int need_new_cln_10 = TRUE;	/* FALSE => use cached cln_10 value */
+	COMPLEX *ln_c;			/* ln(x) */
+	COMPLEX *ret;			/* base 10 logarithm of x */
+
+	/*
+	 * compute ln(c) first
+	 */
+	ln_c = c_ln(c, epsilon);
+	/* log(1) == 0 */
+	if (ciszero(ln_c)) {
+		return ln_c;
+	}
+
+	/*
+	 * save epsilon for ln(10) if needed
+	 */
+	if (cln_10_epsilon == NULL) {
+		/* first time call */
+		cln_10_epsilon = qcopy(epsilon);
+	} else if (qcmp(cln_10_epsilon, epsilon) == TRUE) {
+		/* replaced cacheed value with epsilon arg */
+		qfree(cln_10_epsilon);
+		cln_10_epsilon = qcopy(epsilon);
+	} else if (cln_10 != NULL) {
+		/* the previously computed ln(2) is OK to use */
+		need_new_cln_10 = FALSE;
+	}
+
+	/*
+	 * compute ln(10) if needed
+	 */
+	if (need_new_cln_10 == TRUE) {
+		if (cln_10 != NULL) {
+			comfree(cln_10);
+		}
+		cln_10 = c_ln(&_cten_, cln_10_epsilon);
+	}
+
+	/*
+	 * return ln(c) / ln(10)
+	 */
+	ret = c_div(ln_c, cln_10);
+	comfree(ln_c);
+	return ret;
+}
+
 
 /*
  * Calculate the complex cosine within the specified accuracy.
@@ -526,7 +590,7 @@ cln(COMPLEX *c, NUMBER *epsilon)
  *	cos(x) = (exp(1i * x) + exp(-1i * x))/2;
  */
 COMPLEX *
-ccos(COMPLEX *c, NUMBER *epsilon)
+c_cos(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *r, *ctmp1, *ctmp2, *ctmp3;
 	NUMBER *epsilon1;
@@ -545,7 +609,7 @@ ccos(COMPLEX *c, NUMBER *epsilon)
 	ctmp1->real = neg ? qneg(c->imag) : qlink(c->imag);
 	ctmp1->imag = neg ? qlink(c->real) : qneg(c->real);
 	epsilon1 = qbitvalue(n - 2);
-	ctmp2 = cexp(ctmp1, epsilon1);
+	ctmp2 = c_exp(ctmp1, epsilon1);
 	comfree(ctmp1);
 	qfree(epsilon1);
 	if (ctmp2 == NULL)
@@ -554,11 +618,11 @@ ccos(COMPLEX *c, NUMBER *epsilon)
 		comfree(ctmp2);
 		return clink(&_czero_);
 	}
-	ctmp1 = cinv(ctmp2);
-	ctmp3 = cadd(ctmp2, ctmp1);
+	ctmp1 = c_inv(ctmp2);
+	ctmp3 = c_add(ctmp2, ctmp1);
 	comfree(ctmp1);
 	comfree(ctmp2);
-	ctmp1 = cscale(ctmp3, -1);
+	ctmp1 = c_scale(ctmp3, -1);
 	comfree(ctmp3);
 	r = comalloc();
 	qfree(r->real);
@@ -576,7 +640,7 @@ ccos(COMPLEX *c, NUMBER *epsilon)
  *	sin(x) = (exp(1i * x) - exp(-i1*x))/(2i).
  */
 COMPLEX *
-csin(COMPLEX *c, NUMBER *epsilon)
+c_sin(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *r, *ctmp1, *ctmp2, *ctmp3;
 	NUMBER *qtmp, *epsilon1;
@@ -597,7 +661,7 @@ csin(COMPLEX *c, NUMBER *epsilon)
 	ctmp1->real = neg ? qneg(c->imag) : qlink(c->imag);
 	ctmp1->imag = neg ? qlink(c->real) : qneg(c->real);
 	epsilon1 = qbitvalue(n - 2);
-	ctmp2 = cexp(ctmp1, epsilon1);
+	ctmp2 = c_exp(ctmp1, epsilon1);
 	comfree(ctmp1);
 	qfree(epsilon1);
 	if (ctmp2 == NULL)
@@ -606,11 +670,11 @@ csin(COMPLEX *c, NUMBER *epsilon)
 		comfree(ctmp2);
 		return clink(&_czero_);
 	}
-	ctmp1 = cinv(ctmp2);
-	ctmp3 = csub(ctmp2, ctmp1);
+	ctmp1 = c_inv(ctmp2);
+	ctmp3 = c_sub(ctmp2, ctmp1);
 	comfree(ctmp1);
 	comfree(ctmp2);
-	ctmp1 = cscale(ctmp3, -1);
+	ctmp1 = c_scale(ctmp3, -1);
 	comfree(ctmp3);
 	r = comalloc();
 	qtmp = neg ? qlink(ctmp1->imag) : qneg(ctmp1->imag);
@@ -627,105 +691,105 @@ csin(COMPLEX *c, NUMBER *epsilon)
 
 
 COMPLEX *
-ccosh(COMPLEX *c, NUMBER *epsilon)
+c_cosh(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 
-	tmp1 = cexp(c, epsilon);
+	tmp1 = c_exp(c, epsilon);
 	if (tmp1 == NULL)
 		return NULL;
-	tmp2 = cneg(c);
-	tmp3 = cexp(tmp2, epsilon);
+	tmp2 = c_neg(c);
+	tmp3 = c_exp(tmp2, epsilon);
 	comfree(tmp2);
 	if (tmp3 == NULL)
 		return NULL;
-	tmp2 = cadd(tmp1, tmp3);
+	tmp2 = c_add(tmp1, tmp3);
 	comfree(tmp1);
 	comfree(tmp3);
-	tmp1 = cscale(tmp2, -1);
+	tmp1 = c_scale(tmp2, -1);
 	comfree(tmp2);
 	return tmp1;
 }
 
 
 COMPLEX *
-csinh(COMPLEX *c, NUMBER *epsilon)
+c_sinh(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 
-	tmp1 = cexp(c, epsilon);
+	tmp1 = c_exp(c, epsilon);
 	if (tmp1 == NULL)
 		return NULL;
-	tmp2 = cneg(c);
-	tmp3 = cexp(tmp2, epsilon);
+	tmp2 = c_neg(c);
+	tmp3 = c_exp(tmp2, epsilon);
 	comfree(tmp2);
 	if (tmp3 == NULL)
 		return NULL;
-	tmp2 = csub(tmp1, tmp3);
+	tmp2 = c_sub(tmp1, tmp3);
 	comfree(tmp1);
 	comfree(tmp3);
-	tmp1 = cscale(tmp2, -1);
+	tmp1 = c_scale(tmp2, -1);
 	comfree(tmp2);
 	return tmp1;
 }
 
 
 COMPLEX *
-casin(COMPLEX *c, NUMBER *epsilon)
+c_asin(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = cmul(&_conei_, c);
-	tmp2 = casinh(tmp1, epsilon);
+	tmp1 = c_mul(&_conei_, c);
+	tmp2 = c_asinh(tmp1, epsilon);
 	comfree(tmp1);
-	tmp1 = cdiv(tmp2, &_conei_);
+	tmp1 = c_div(tmp2, &_conei_);
 	comfree(tmp2);
 	return tmp1;
 }
 
 
 COMPLEX *
-cacos(COMPLEX *c, NUMBER *epsilon)
+c_acos(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = csquare(c);
-	tmp2 = csub(&_cone_, tmp1);
+	tmp1 = c_square(c);
+	tmp2 = c_sub(&_cone_, tmp1);
 	comfree(tmp1);
-	tmp1 = csqrt(tmp2, epsilon, 24);
+	tmp1 = c_sqrt(tmp2, epsilon, 24);
 	comfree(tmp2);
-	tmp2 = cmul(&_conei_, tmp1);
+	tmp2 = c_mul(&_conei_, tmp1);
 	comfree(tmp1);
-	tmp1 = cadd(c, tmp2);
+	tmp1 = c_add(c, tmp2);
 	comfree(tmp2);
-	tmp2 = cln(tmp1, epsilon);
+	tmp2 = c_ln(tmp1, epsilon);
 	comfree(tmp1);
-	tmp1 = cdiv(tmp2, &_conei_);
+	tmp1 = c_div(tmp2, &_conei_);
 	comfree(tmp2);
 	return tmp1;
 }
 
 
 COMPLEX *
-casinh(COMPLEX *c, NUMBER *epsilon)
+c_asinh(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 	BOOL neg;
 
 	neg = qisneg(c->real);
-	tmp1 = neg ? cneg(c) : clink(c);
-	tmp2 = csquare(tmp1);
-	tmp3 = cadd(&_cone_, tmp2);
+	tmp1 = neg ? c_neg(c) : clink(c);
+	tmp2 = c_square(tmp1);
+	tmp3 = c_add(&_cone_, tmp2);
 	comfree(tmp2);
-	tmp2 = csqrt(tmp3, epsilon, 24);
+	tmp2 = c_sqrt(tmp3, epsilon, 24);
 	comfree(tmp3);
-	tmp3 = cadd(tmp2, tmp1);
+	tmp3 = c_add(tmp2, tmp1);
 	comfree(tmp1);
 	comfree(tmp2);
-	tmp1 = cln(tmp3, epsilon);
+	tmp1 = c_ln(tmp3, epsilon);
 	comfree(tmp3);
 	if (neg) {
-		tmp2 = cneg(tmp1);
+		tmp2 = c_neg(tmp1);
 		comfree(tmp1);
 		return tmp2;
 	}
@@ -734,153 +798,153 @@ casinh(COMPLEX *c, NUMBER *epsilon)
 
 
 COMPLEX *
-cacosh(COMPLEX *c, NUMBER *epsilon)
+c_acosh(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = csquare(c);
-	tmp2 = csub(tmp1, &_cone_);
+	tmp1 = c_square(c);
+	tmp2 = c_sub(tmp1, &_cone_);
 	comfree(tmp1);
-	tmp1 = csqrt(tmp2, epsilon, 24);
+	tmp1 = c_sqrt(tmp2, epsilon, 24);
 	comfree(tmp2);
-	tmp2 = cadd(c, tmp1);
+	tmp2 = c_add(c, tmp1);
 	comfree(tmp1);
-	tmp1 = cln(tmp2, epsilon);
+	tmp1 = c_ln(tmp2, epsilon);
 	comfree(tmp2);
 	return tmp1;
 }
 
 
 COMPLEX *
-catan(COMPLEX *c, NUMBER *epsilon)
+c_atan(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 
 	if (qiszero(c->real) && qisunit(c->imag))
 		return NULL;
-	tmp1 = csub(&_conei_, c);
-	tmp2 = cadd(&_conei_, c);
-	tmp3 = cdiv(tmp1, tmp2);
+	tmp1 = c_sub(&_conei_, c);
+	tmp2 = c_add(&_conei_, c);
+	tmp3 = c_div(tmp1, tmp2);
 	comfree(tmp1);
 	comfree(tmp2);
-	tmp1 = cln(tmp3, epsilon);
+	tmp1 = c_ln(tmp3, epsilon);
 	comfree(tmp3);
-	tmp2 = cscale(tmp1, -1);
+	tmp2 = c_scale(tmp1, -1);
 	comfree(tmp1);
-	tmp1 = cdiv(tmp2, &_conei_);
+	tmp1 = c_div(tmp2, &_conei_);
 	comfree(tmp2);
 	return tmp1;
 }
 
 
 COMPLEX *
-cacot(COMPLEX *c, NUMBER *epsilon)
+c_acot(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 
 	if (qiszero(c->real) && qisunit(c->imag))
 		return NULL;
-	tmp1 = cadd(c, &_conei_);
-	tmp2 = csub(c, &_conei_);
-	tmp3 = cdiv(tmp1, tmp2);
+	tmp1 = c_add(c, &_conei_);
+	tmp2 = c_sub(c, &_conei_);
+	tmp3 = c_div(tmp1, tmp2);
 	comfree(tmp1);
 	comfree(tmp2);
-	tmp1 = cln(tmp3, epsilon);
+	tmp1 = c_ln(tmp3, epsilon);
 	comfree(tmp3);
-	tmp2 = cscale(tmp1, -1);
+	tmp2 = c_scale(tmp1, -1);
 	comfree(tmp1);
-	tmp1 = cdiv(tmp2, &_conei_);
+	tmp1 = c_div(tmp2, &_conei_);
 	comfree(tmp2);
 	return tmp1;
 }
 
 COMPLEX *
-casec(COMPLEX *c, NUMBER *epsilon)
+c_asec(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = cinv(c);
-	tmp2 = cacos(tmp1, epsilon);
+	tmp1 = c_inv(c);
+	tmp2 = c_acos(tmp1, epsilon);
 	comfree(tmp1);
 	return tmp2;
 }
 
 COMPLEX *
-cacsc(COMPLEX *c, NUMBER *epsilon)
+c_acsc(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = cinv(c);
-	tmp2 = casin(tmp1, epsilon);
+	tmp1 = c_inv(c);
+	tmp2 = c_asin(tmp1, epsilon);
 	comfree(tmp1);
 	return tmp2;
 }
 
 
 COMPLEX *
-catanh(COMPLEX *c, NUMBER *epsilon)
+c_atanh(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 
 	if (qiszero(c->imag) && qisunit(c->real))
 		return NULL;
-	tmp1 = cadd(&_cone_, c);
-	tmp2 = csub(&_cone_, c);
-	tmp3 = cdiv(tmp1, tmp2);
+	tmp1 = c_add(&_cone_, c);
+	tmp2 = c_sub(&_cone_, c);
+	tmp3 = c_div(tmp1, tmp2);
 	comfree(tmp1);
 	comfree(tmp2);
-	tmp1 = cln(tmp3, epsilon);
+	tmp1 = c_ln(tmp3, epsilon);
 	comfree(tmp3);
-	tmp2 = cscale(tmp1, -1);
+	tmp2 = c_scale(tmp1, -1);
 	comfree(tmp1);
 	return tmp2;
 }
 
 
 COMPLEX *
-cacoth(COMPLEX *c, NUMBER *epsilon)
+c_acoth(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 
 	if (qiszero(c->imag) && qisunit(c->real))
 		return NULL;
-	tmp1 = cadd(c, &_cone_);
-	tmp2 = csub(c, &_cone_);
-	tmp3 = cdiv(tmp1, tmp2);
+	tmp1 = c_add(c, &_cone_);
+	tmp2 = c_sub(c, &_cone_);
+	tmp3 = c_div(tmp1, tmp2);
 	comfree(tmp1);
 	comfree(tmp2);
-	tmp1 = cln(tmp3, epsilon);
+	tmp1 = c_ln(tmp3, epsilon);
 	comfree(tmp3);
-	tmp2 = cscale(tmp1, -1);
+	tmp2 = c_scale(tmp1, -1);
 	comfree(tmp1);
 	return tmp2;
 }
 
 COMPLEX *
-casech(COMPLEX *c, NUMBER *epsilon)
+c_asech(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = cinv(c);
-	tmp2 = cacosh(tmp1, epsilon);
+	tmp1 = c_inv(c);
+	tmp2 = c_acosh(tmp1, epsilon);
 	comfree(tmp1);
 	return tmp2;
 }
 
 COMPLEX *
-cacsch(COMPLEX *c, NUMBER *epsilon)
+c_acsch(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = cinv(c);
-	tmp2 = casinh(tmp1, epsilon);
+	tmp1 = c_inv(c);
+	tmp2 = c_asinh(tmp1, epsilon);
 	comfree(tmp1);
 	return tmp2;
 }
 
 
 COMPLEX *
-cgd(COMPLEX *c, NUMBER *epsilon)
+c_gd(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2, *tmp3;
 	NUMBER *q1, *q2;
@@ -947,30 +1011,30 @@ cgd(COMPLEX *c, NUMBER *epsilon)
 		return tmp1;
 	}
 	neg = qisneg(c->real);
-	tmp1 = neg ? cneg(c) : clink(c);
-	tmp2 = cexp(tmp1, epsilon);
+	tmp1 = neg ? c_neg(c) : clink(c);
+	tmp2 = c_exp(tmp1, epsilon);
 	comfree(tmp1);
 	if (tmp2 == NULL)
 		return NULL;
-	tmp1 = cmul(&_conei_, tmp2);
-	tmp3 = cadd(&_conei_, tmp2);
+	tmp1 = c_mul(&_conei_, tmp2);
+	tmp3 = c_add(&_conei_, tmp2);
 	comfree(tmp2);
-	tmp2 = cadd(tmp1, &_cone_);
+	tmp2 = c_add(tmp1, &_cone_);
 	comfree(tmp1);
 	if (ciszero(tmp2) || ciszero(tmp3)) {
 		comfree(tmp2);
 		comfree(tmp3);
 		return NULL;
 	}
-	tmp1 = cdiv(tmp2, tmp3);
+	tmp1 = c_div(tmp2, tmp3);
 	comfree(tmp2);
 	comfree(tmp3);
-	tmp2 = cln(tmp1, epsilon);
+	tmp2 = c_ln(tmp1, epsilon);
 	comfree(tmp1);
-	tmp1 = cdiv(tmp2, &_conei_);
+	tmp1 = c_div(tmp2, &_conei_);
 	comfree(tmp2);
 	if (neg) {
-		tmp2 = cneg(tmp1);
+		tmp2 = c_neg(tmp1);
 		comfree(tmp1);
 		return tmp2;
 	}
@@ -979,16 +1043,16 @@ cgd(COMPLEX *c, NUMBER *epsilon)
 
 
 COMPLEX *
-cagd(COMPLEX *c, NUMBER *epsilon)
+c_agd(COMPLEX *c, NUMBER *epsilon)
 {
 	COMPLEX *tmp1, *tmp2;
 
-	tmp1 = cmul(&_conei_, c);
-	tmp2 = cgd(tmp1, epsilon);
+	tmp1 = c_mul(&_conei_, c);
+	tmp2 = c_gd(tmp1, epsilon);
 	comfree(tmp1);
 	if (tmp2 == NULL)
 		return NULL;
-	tmp1 = cdiv(tmp2, &_conei_);
+	tmp1 = c_div(tmp2, &_conei_);
 	comfree(tmp2);
 	return tmp1;
 }
@@ -1000,7 +1064,7 @@ cagd(COMPLEX *c, NUMBER *epsilon)
  *	q1 * cos(q2) + q1 * sin(q2) * i.
  */
 COMPLEX *
-cpolar(NUMBER *q1, NUMBER *q2, NUMBER *epsilon)
+c_polar(NUMBER *q1, NUMBER *q2, NUMBER *epsilon)
 {
 	COMPLEX *r;
 	NUMBER *tmp, *cos, *sin;
@@ -1042,7 +1106,7 @@ cpolar(NUMBER *q1, NUMBER *q2, NUMBER *epsilon)
  * specified error.
  */
 COMPLEX *
-cpower(COMPLEX *c1, COMPLEX *c2, NUMBER *epsilon)
+c_power(COMPLEX *c1, COMPLEX *c2, NUMBER *epsilon)
 {
 	COMPLEX *ctmp1, *ctmp2;
 	long k1, k2, k, m1, m2, m, n;
@@ -1053,8 +1117,8 @@ cpower(COMPLEX *c1, COMPLEX *c2, NUMBER *epsilon)
 		/*NOTREACHED*/
 	}
 	if (ciszero(c1)) {
-		if (qisneg(c2->real) || qiszero(c2->real)) {
-			math_error ("Non-positive exponent of zero");
+		if (cisreal(c2) && qisneg(c2->real)) {
+			math_error ("Non-positive real exponent of zero");
 			/*NOTREACHED*/
 		}
 		return clink(&_czero_);
@@ -1099,11 +1163,11 @@ cpower(COMPLEX *c1, COMPLEX *c2, NUMBER *epsilon)
 	if (k < n)
 		return clink(&_czero_);
 	epsilon1 = qbitvalue(n - k - m - 2);
-	ctmp1 = cln(c1, epsilon1);
+	ctmp1 = c_ln(c1, epsilon1);
 	qfree(epsilon1);
-	ctmp2 = cmul(ctmp1, c2);
+	ctmp2 = c_mul(ctmp1, c2);
 	comfree(ctmp1);
-	ctmp1 = cexp(ctmp2, epsilon);
+	ctmp1 = c_exp(ctmp2, epsilon);
 	comfree(ctmp2);
 	return ctmp1;
 }
@@ -1165,7 +1229,7 @@ cprintfr(COMPLEX *c)
 
 
 NUMBER *
-cilog(COMPLEX *c, ZVALUE base)
+c_ilog(COMPLEX *c, ZVALUE base)
 {
 	NUMBER *qr, *qi;