Release calc version 2.11.8.1

CHANGES

@@ -1,4 +1,195 @@
-The following are the changes from calc version 2.11.5.5 to date:
+The following are the changes from calc version 2.11.8.0 to date:
+
+    Updated HOWTO.INSTALL to reflect the new RPM files.
+
+    Clarify that the internal hash as well as the hash builtin
+    function used by calc, while based on the Fowler/Noll/Vo
+    hash is NOT an FNV hash.
+
+    Made slight performance improvements to calc by an optimization of how
+    calc's internal hash is computed.  The "make chk" regression test
+    runs about 1.5% faster (when compiled with -O3 on an AMD Athlon)
+    NO_HASH_CPU_OPTIMIZATION is not defined.  Calc's internal hash values
+    have not changed.  By default, NO_HASH_CPU_OPTIMIZATION is NOT defined
+    and the slightly faster expression is used.
+
+    A slight modification of what was known as the "calc new stardard"
+    configuration (calc -n or config("all", "newstd")) is now the default
+    calc configuration.  The flag:
+
+    	calc -O
+
+    was added to get the old classic calc configuration.  The flag command
+    line flag, -n, now does nothing.  Use of -n is deprecated and may go
+    away / be used for something else in the future.
+
+    The following table gives the summary of these changes:
+
+	     pre v2.11.8		     v2.11.8
+	     default         pre v2.11.8     -O & oldstd      v2.11.8
+	     and oldstd	     -n & newstd     classic cfg      default
+	     --------------------------------------------------------
+    epsilon	1e-20		1e-10		1e-20		1e-20
+    quo	    	2		2		2		2
+    outround	2		24		2		24
+    leadzero	0		1		0		1
+    fullzero	0		1		0		0
+    prompt	>		;		>		;
+    more	>>		;;		>>		;;
+
+    With the exception of epsilon being 1e-20, and fullzero being unset,
+    the new default calc config is like it was (pre-2.11.8) with calc -n /
+    config("all", "newstd").
+
+    The new default config is the old classic config with outround being
+    24, leadzero being set, and the prompts being ;'s.
+
+    Fixed a bug in the evaluation of tanh(1e-23) with an epsilon(1e-100).
+    Thanks goes to Dmitry G. Baksheyev <bd at nbsp dot nsk dot su>
+    for reprting the problem, and thanks goes to Ernest Bowen
+    <ernie at turing dot une dot edu dot au> for the fix.
+
+The following are the changes from calc version 2.11.7.0 to 2.11.7.1:
+
+    Added support to build calc RPMs thanks to Petteri Kettunen
+    <petterik at users dot sourceforge dot net>.
+
+    Added rpm rule to Makefile to build rpm set.  The rpm rule
+    uses the rpm.mk Makefile and the calc.spec.in spec template.
+
+    The default Makefile is now the Makefile used during rpm
+    creation.  This Makefile assumes that system has readline,
+    ncurses (-lreadline -lhistory -lncurses), and less.
+    It compiled with a high gcc optimization level (-O3 -g3).
+    The Makefile used during rpm creation is the Makefile
+    that appears in the calc-src rpm as well.
+
+    The Makefile shipped with the old style gziped tarball
+    is still the same generic Makefile.
+
+    The Makefile now uses ${MKDIR} ${MKDIR_ARG} when creating
+    directories during installation.  By default, it does
+    a mkdir -p when forming directories.
+
+    Fixed attributes on include and lib calc-devel files.
+
+    Adjusted the interaction between rpm.mk, and the calc.spec.in.
+    Release number now comes from calc.spec.in only.
+
+    Renamed calc and calc-devel RPMs to use .i686 instead of .i386.
+
+
+The following are the changes from calc version 2.11.6.3 to date:
+
+    Fixed a bug in deg.cal where fixdms() was being called with
+    the wrong type of argument.
+
+    Changed the value of digits(1) and digits(0) to be 1.  Now digits()
+    returns number of digits in the standard base-b representation
+    when x is truncated to an integer and the sign is ignored.
+    To be more precise: when abs(int(x)) > 0, this function returns
+    the value 1 + ilog(x, b).  When abs(int(x)) == 0, then this
+    function returns the value 1.
+
+    As the result of the above digits() change, the repeat.cal
+    resource file script was modified to remove the special
+    case for repeating a value of 1.  Also the regress tests
+    #715, #977 and #978 were changed.
+
+    Made a minor improvement to the "help places" documentation.
+
+    Fixed dms_neg(a) in deg.cal thanks to a bug report by kaa
+    <kaa76 at pochtamt dot ru>.
+
+
+The following are the changes from calc version 2.11.6.0 to 2.11.6.2:
+
+    Clarified remark in lucas.cal about use of n mod 2^n == 0.
+
+    Fixed help typos reported by Marc Mezzarobba <mm at mm dot ovh dot org>.
+
+    Forced system("") to return 0 under windoz.
+
+    The direct.h include file is not used when compiling under Cygwin.
+
+    Fixed bug where random(10,11) caused calc to dump core when issued
+    the 2nd time.
+
+    Moved the setting of the Makefile variable ${CALC_INCDIR} to
+    the section where things like ${BINDIR} and ${LIBDIR} are set.
+    Idea from Clifford Kite <kite_public1 at ev1 dot net>.
+
+    The Makefile is shipped mode 0644 since a number of folks
+    edit it (to build and check calc) as a non-root user and later
+    on su to root to install.  Idea from Clifford Kite <kite_public1
+    at ev1 dot net>.
+
+    Added base2() builtin function to calc.  Normally calc prints
+    values according to base().  Frequently some users want to see
+    a value in two bases.  Flipping back and forth between to bases
+    is a bit of a pain.  With base2(), calc will output a value twice:
+
+	; 234567
+		234567
+	; base2(16),
+	; 234567
+		234567 /* 0x39447 */
+	; 131072
+		131072 /* 0x20000 */
+	; base2(0),
+	; 131072
+        131072
+
+    By default, base2() is disabled.  Calling base2(0) will also turn
+    off the double base mode.  Thanks goes to Erik Anggard
+    <erik dot anggard at packetfront dot com> for his idea and
+    his initial patch.
+
+    Added repeat.cal as a calc resource file script:
+
+	repeat(digit_set, repeat_count)
+
+	Return the value of the digit_set repeated repeat_count times.
+	Both digit_set and repeat_count must be integers > 0.
+
+	For example repeat(423,5) returns the value 423423423423423,
+	which is the digit_set 423 repeated 5 times.
+
+    Makefile no longer makes a direct reference to Red Hat 6.0.
+
+    Added missing math_setmode2() prototype to zmath.h.
+
+    Fixed some implicit declarations of functions by either making
+    them explicit or by including the proper system .h files.
+
+    Makefile no longer uses -Wno-implicit flag, by default, for
+    gcc based compiles on calc source.  Makefile now attempts to
+    compile no_implicit.c with an explicit -Wno-implicit arg in an
+    effort to determine of -Wno-implicit is a valid compiler flag.
+    If no_implicit.c is compiled with -Wno-implicit, then
+    the file no_implicit.arg is created with the contents
+    of the -Wno-implicit flag.  Otherwise no_implicit.arg
+    is created as an empty file.
+
+    Added the Makefile variable ${HAVE_NO_IMPLICIT}, which if
+    not set to YES will prevent no_implicit.c from being
+    compiled and prevent the -Wno-implicit flag from being used.
+    If ${HAVE_NO_IMPLICIT} is not YES, then an empty no_implicit.arg
+    file is created and no_implicit.c is not compiled.
+
+    The seed.c file, because the pseudo_seed() function contains
+    calls to a number of various system functions, attempts to
+    compile with the -Wno-implicit flag (if allowed by the
+    formation of the no_implicit.arg file).
+
+    Misc make depend fixes and cleanup.
+
+    Fixed formation of the custom/.all file.
+
+    Fixed repeat(1, repeat_count) bug.
+
+
+The following are the changes from calc version 2.11.5.5 to 2.11.5.9:
 
     Now using version numbers of one of these forms:
 
@@ -18,6 +209,48 @@ The following are the changes from calc version 2.11.5.5 to date:
     NOTE: See the BUGS file for a Linux issue when compiling calc
     with -O (or -O2 or -O3) AND with -g (or -g3) AND with readline.
 
+    Removed an obsolete reference to TOPDIR.  This was fixed thanks to
+    a bug report by Clifford Kite <kite_public1 at ev1 dot net>.
+    Fixed other inconsistencies related to things like BINDIR.
+
+    Fixed calc man page so that is refers to -f instead of the old -S flag.
+    Fixed thanks to Clifford Kite <kite_public1 at ev1 dot net> for
+    point this out.
+
+    All for loops end with /dev/null to avoid any problems related
+    to systems that cannot grok empty for loops.
+
+    Changed the libcalc functions creal and cimag to c_real and c_imag
+    to about conflicts with new libc such as those used by gcc v3.
+    Thanks Eli Zaretskii <eliz at is dot elta dot co dot il> and
+    Martin Buck <m at rtin-buck dot de> for alerting us to this conflict.
+
+    The Makefile no longer hard code's /usr/include.  Instead it uses
+    the ${INCDIR} Makefile variable.  Thanks goes to Eli Zaretskii
+    <eliz at is dot elta dot co dot il> for pointing out this inconsistency.
+
+    Added mods to support compilation under DJGPP.  DJGPP runs on 386
+    and newer PCs running DOS or dos-compatible operating systems.
+    See http://www.delorie.com/djgpp/.  Thanks goes to Eli Zaretskii
+    <eliz at is dot elta dot co dot il> for sending in these mods.
+
+    Updated README.WINDOWS to include information on building with DJGPP.
+
+    The pld folks are building RPMs based on our calc distrbutions.
+    See:  ftp://ftp.pld.org.pl/dists/ra/PLD/i686/PLD/RPMS or
+    http://ftp.pld.org.pl/dists/ra/PLD/i686/PLD/RPMS more information.
+    We appreciate their work in this regard.  In the next release, we
+    plan to also build and release our own RPMs based on their efforts.
+
+    Changed the Makefile variable CUSTOMLIBDIR to CUSTOMCALDIR.
+    Changed the Makefile variable CSHAREDIR to CALC_SHAREDIR.
+    Changed the Makefile variable INCDIRCALC to CALC_INCDIR.
+    Removed the Makefile variable SHAREDIR.
+
+    Updated the HOWTO.INSTALL and README.WINDOWS files.
+
+    Fixed definition of MAXUFULL.  Thanks to a bus report from
+    Jill Poland <jpoland at cadence dot com>.
 
 The following are the changes from calc version 2.11.5t4.1 to 2.11.5t4.4:
 
@@ -5379,8 +5612,8 @@ Following is a list of visible changes to calc from version 1.24.7 to 1.26.1:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.45 $
-## @(#) $Id: CHANGES,v 29.45 2001/12/31 22:12:35 chongo Exp $
+## @(#) $Revision: 29.60 $
+## @(#) $Id: CHANGES,v 29.60 2003/08/26 04:35:45 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/CHANGES,v $
 ##
 ## Under source code control:	1993/06/02 18:12:57

COPYING

@@ -12,8 +12,8 @@ This file is Copyrighted
 	Everyone is permitted to copy and distribute verbatim copies
 	of this license document, but changing it is not allowed.
 
-    # @(#) $Revision: 29.6 $
-    # @(#) $Id: COPYING,v 29.6 2001/06/01 11:26:53 chongo Exp $
+    # @(#) $Revision: 29.7 $
+    # @(#) $Id: COPYING,v 29.7 2003/02/26 16:54:59 chongo Exp $
     # @(#) $Source: /usr/local/src/cmd/calc/RCS/COPYING,v $
 
 =-=
@@ -164,6 +164,7 @@ Calc copyrights and exception files
 	Copyright (C) year  Landon Curt Noll
 	Copyright (C) year  Ernest Bowen and Landon Curt Noll
 	Copyright (C) year  Ernest Bowen
+	Copyright (C) year  Petteri Kettunen and Landon Curt Noll
 
     These files are not covered under one of the Copyrights listed above:
 

HOWTO.INSTALL

@@ -1,41 +1,130 @@
-Installing calc in 4 easy steps:
+Installing calc from the gziped tarball in 4 easy steps:
 
-    1) Look at the makefile, and adjust it to suit your needs.
+    0)  If your platform supports i686 RPMs, you may want to go to:
 
-       Here are some Makefile hints:
+	    http://www.isthe.com/chongo/src/calc/
 
-	   Select a compiler set by commenting in the appropriate set
-	   of cc options.  As shipped the Makefile assumes a gcc-like
-	   environment such as Linux.  If a more appropriate cc set if
-	   found below, comment out the Linux set and comment in that
-	   set or edit the gcc set or the common cc set as needed.
+	and use these RPMs:
 
-	   You may or may not need RANLIB when building libraries.
-	   As shipped the Makefile assumes RANLIB is needed.
-	   Comment the in/out the RANLIB value if ranlib does
-	   not work or does not exist.
+	    * calc*.i686.rpm
+		- all that is needed if you just want to use calc
 
-	   You may want to change the default pager used by calc.
-	   As shipped the Makefile assumes 'more'.  On your system
-	   you may find 'less' to be a better pager.
+	    * calc-devel-*.i686.rpm
+	        - calc *.h header and *.a lib files for use in other programs
 
-	   Set TOPDIR to be the place under which help files, calc,
-	   include files and calc libs are to be installed.  As shipped
-	   the Makefile assumes a TOPDIR of /usr/local/lib.
+	    * calc.*.src.rpm
+	        - calc source in RPM package form
 
-	   Set BINDIR to the place where calc is installed.  As shipped
-	   the Makefile assumes a BINDIR /usr/local/bin.
+	The following 4 steps apply to calc source tree that comes from either:
 
-	   Some compilers (to put it mildly) have bugs.  Sometimes the
-	   DEBUG Makefile variable causes the compiler / optimizer to
-	   produce bad code.  Other compilers do just fine.  If possible
-	   try to use DEBUG=-O3 -g3 (maximum optimization and debug symbols).
-	   If the calc test fails (see step 3), try lowering either the
-	   -O value and/or the -g3.  Also try using -Osomething without -g.
+		gunzip -c calc-*.tar.gz | tar -xvf -
+
+	or from:
+
+		rpm -ivh calc-*.src.rpm
+		cd /var/tmp
+		gunzip -c /usr/src/redhat/SOURCES/calc-*.tar.gz | tar -xvf -
+
+    1)	Look at the makefile, and adjust it to suit your needs.
+
+	The Makefile, as shipped, is suitable for installation under
+	Linux and Un*x-like environments.  For the most part, the default
+	values should work.  If in doubt, follow the 'When in doubt'
+	suggestion.
+
+	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+	! If you are building under Windoz or a Windoz-like environment !
+	! (such as Cygwin or DJGPP), read the README.WINDOWS file.      !
+	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+	You should determine if these Makefile variables are reasonable:
+
+	    INCDIR		Where the system include (.h) files are kept.
+	    BINDIR		Where to install calc binary files.
+	    LIBDIR		Where to install calc link library (*.a) files.
+	    CALC_SHAREDIR	Where to install calc help, .cal, startup, and
+	    			config files.
+
+	You may want to change the default installation locations for
+	these values, which are based on the 4 values listed above:
+
+	    HELPDIR            where the help directory is installed
+	    CALC_INCDIR        where the calc include files are installed
+	    CUSTOMCALDIR       where custom *.cal files are installed
+	    CUSTOMHELPDIR      where custom help files are installed
+	    CUSTOMINCPDIR      where custom .h files are installed
+	    SCRIPTDIR          where calc shell scripts are installed
+
+	If you want to install calc files under a top level directory,
+	then set the T value:
+
+	    The calc install is performed under $T, the calc build is
+	    performed under /.	The purpose for $T is to allow someone
+	    to install calc somewhere other than into the system area.
+
+	    For example, if:
+
+	    	BINDIR= /usr/bin
+		LIBDIR= /usr/lib
+		CALC_SHAREDIR= /usr/share/calc
+
+	    and if:
+
+	    	T= /var/tmp/testing
+
+	    Then the installation locations will be:
+
+		calc binary files:	/var/tmp/testing/usr/bin
+		calc link library:	/var/tmp/testing/usr/lib
+		calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+		... etc ...		/var/tmp/testing/...
+
+	    If $T is empty, calc is installed under /, which is the same
+	    top of tree for which it was built.  If $T is non-empty, then
+	    calc is installed under $T, as if one had to chroot under
+	    $T for calc to operate.
+
+	Look for the section that starts:
+
+	    ################
+	    # compiler set #
+	    ################
+
+	    Select a compiler set by commenting in the appropriate set
+	    of cc options.  As shipped the Makefile assumes a gcc-like
+	    environment such as Linux.  If a more appropriate cc set if
+	    found below, comment out the Linux set and comment in that
+	    set or edit the gcc set or the common cc set as needed.
+
+	You may want to change these Makrfile variables from their defaults:
+
+	    RANLIB
+
+		You may or may not need RANLIB when building libraries.
+		As shipped the Makefile assumes RANLIB is needed.
+		Comment the in/out the RANLIB value if ranlib does
+		not work or does not exist.
+
+	    CALCPAGER
+
+		You may want to change the default pager used by calc.
+		As shipped the Makefile assumes 'more'.  On your system
+		you may find 'less' to be a better pager.
+
+	    DEBUG
+
+	       Some compilers (to put it mildly) have bugs.  Sometimes the
+	       DEBUG Makefile variable causes the compiler / optimizer to
+	       produce bad code.  Other compilers do just fine.
+
+	       If possible try to use DEBUG=-O3 -g3 (maximum optimization
+	       and debug symbols).  If the calc test fails (see step 3),
+	       try lowering either the -O value and/or the -g3.  Also try
+	       using -Osomething without -g.
 
 	   Adjust other Makefile variables as needed.
 
-    2) build calc:
+    2)	build calc:
 
 	make all
 
@@ -43,13 +132,14 @@ Installing calc in 4 easy steps:
 	    you may find.  See the BUGS file if you find any compiler
 	    warning or errors.
 
-    3) test calc:
+    3)	test calc:
 
 	make check
 
-	==> If you run into problems, follow the BUGS file instructions.
+	==> If you run into problems, read the BUGS file and follow
+	    the instructions found in there.
 
-    4) install calc:
+    4)	install calc:
 
 	make install
 
@@ -72,8 +162,8 @@ the calc help subsystem.  See the README file for details.
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.3 $
-## @(#) $Id: HOWTO.INSTALL,v 29.3 2001/12/11 02:51:00 chongo Exp $
+## @(#) $Revision: 29.7 $
+## @(#) $Id: HOWTO.INSTALL,v 29.7 2003/04/15 03:38:34 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/HOWTO.INSTALL,v $
 ##
 ## Under source code control:	1999/09/27 20:48:44

README.WINDOWS

@@ -3,15 +3,6 @@ Dear calc user on a Windoz based system,
 See the HOWTO.INSTALL file for information on how to build and install calc.
 See also the README file.
 
-NOTE: The Windoz port is extremely experimental, untested and perhaps
-      incomplete.  We are in the process of making it easier.  The
-      following should help anyone who is trying to make a go of this
-      under the current code conditions.
-
-NOTE: We are currently ONLY making an effort to support building under
-      Windoz using the Cygwin project (http://sources.redhat.com/cygwin/)
-      with the GCC compiler and Un*x tools for Windows.
-
 NOTE: The main developers do not have access to a Windoz based platform.
       While we will make an effort to not break calc Windoz based system,
       our lack of a Windoz test environment will mean we will make mistakes
@@ -19,7 +10,68 @@ NOTE: The main developers do not have access to a Windoz based platform.
       Of course you are welcome to send us any patches that fix your
       Windoz build environment.
 
-=-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+=-= compiling under DJGPP =-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+You might want to try using the DJGPP system to compile calc.  See:
+
+	http://www.delorie.com/djgpp/
+
+for DJGPP details and availability.
+
+To compile with DJGPP, one needs to select a number of Makefile
+variable changes.  Eli Zaretskii <eliz at is dot elta dot co dot il>
+recommends the following settings:
+
+	TERMCONTROL= -DUSE_TERMIOS
+	BYTE_ORDER= -DLITTLE_ENDIAN
+	LONG_BITS= 32
+	LONGLONG_BITS= 64
+	HAVE_FPOS_POS= -DHAVE_NO_FPOS_POS
+	FPOS_BITS= 32
+	OFF_T_BITS= 32
+	DEV_BITS= 32
+	INODE_BITS= 32
+	HAVE_USTAT= -DHAVE_NO_USTAT
+	HAVE_GETSID= -DHAVE_NO_GETSID
+	HAVE_GETPGID= -DHAVE_NO_GETPGID
+	HAVE_GETTIME= -DHAVE_NO_GETTIME
+	HAVE_GETPRID= -DHAVE_NO_GETPRID
+	HAVE_URANDOM_H= NO
+	ALIGN32= -UMUST_ALIGN32
+	HAVE_MALLOC_H= YES
+	HAVE_STDLIB_H= YES
+	HAVE_STRING_H= YES
+	HAVE_TIMES_H= NO
+	HAVE_SYS_TIMES_H= YES
+	HAVE_TIME_H= YES
+	HAVE_SYS_TIME_H= YES
+	HAVE_UNISTD_H= YES
+	BINDIR= /dev/env/DJDIR/bin
+	INCDIR= /dev/env/DJDIR/include
+	LIBDIR= /dev/env/DJDIR/lib
+	MANDIR= /dev/env/DJDIR/man/man1
+	CATDIR= /dev/env/DJDIR/man/cat1
+	NROFF= groff
+	CALCPATH= .;./cal;~/.cal;${CALC_SHAREDIR};${CUSTOMCALDIR}
+	CALCRC= ${CALC_SHAREDIR}/startup;~/.calcrc;./.calcinit
+	CALCPAGER= less.exe -ci
+	DEBUG= -O2 -gstabs+
+
+The 'Linux set' or 'gcc set' (see the Select your compiler type section)
+should work for DJGPP systems if you set the above Makefile variables.
+
+Look for Makefile comments of the form:
+
+	# Select ...something... for DJGPP.
+
+Follow those recommendations.  In cases where they conflict with
+the above Makefile list, follow the recommendation in the Makefile.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+=-= compiling with Cygwin =-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
 
 An effort is being made to allow windows users to compile calc using the
 Cygwin project (http://sources.redhat.com/cygwin/) with the GCC compiler
@@ -61,8 +113,6 @@ needs.  Just copy the win32/*.[ch] files up into the top level calc
 source directory, edited (if needed) and build using the Cygwin GCC
 compiler.
 
-=-=
-
 People who maintain calc need to keep in mind the following:
 
 The following was added to opcodes.h, config.h, zmath.h and value.h:
@@ -89,7 +139,7 @@ was changed to:
     DLL extern int configtype(char*);
 
 
-## Copyright (C) 2001  Landon Curt Noll and Thomas Jones-Low
+## Copyright (C) 2002  Landon Curt Noll and Thomas Jones-Low
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -105,8 +155,8 @@ was changed to:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.6 $
-## @(#) $Id: README.WINDOWS,v 29.6 2001/04/08 22:13:38 chongo Exp $
+## @(#) $Revision: 29.8 $
+## @(#) $Id: README.WINDOWS,v 29.8 2002/03/14 00:28:28 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/README.WINDOWS,v $
 ##
 ## Under source code control:	2001/02/25 14:00:05

cal/Makefile

@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.12 $
-# @(#) $Id: Makefile,v 29.12 2001/06/08 22:38:53 chongo Exp $
+# @(#) $Revision: 29.15 $
+# @(#) $Id: Makefile,v 29.15 2003/01/05 08:10:56 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/Makefile,v $
 #
 # Under source code control:	1991/07/21 05:00:54
@@ -36,23 +36,111 @@
 SHELL = /bin/sh
 MAKE_FILE = Makefile
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
-#
-# where to install things
-#SHAREDIR= /usr/local/lib
-#SHAREDIR= /usr/lib
-SHAREDIR= /usr/share
-#SHAREDIR= /usr/libdata
+####
 
-CSHAREDIR= ${SHAREDIR}/calc
+# Where the system include (.h) files are kept
+#
+# For DJGPP, select:
+#
+#	INCDIR= /dev/env/DJDIR/include
+#
+# If in doubt, set:
+#
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
+SCRIPTDIR= ${BINDIR}/cscript
 
 # T - top level directory under which calc will be installed
 #
 # The calc install is performed under $T, the calc build is
-# performed under /.  The purpose for $T is to allow someone to
-# install calc somewhere other than into the system area.  For example
-# when forming the calc rpm, the Makefile is called with T=$RPM_BUILD_ROOT.
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
 #
 # If $T is empty, calc is installed under /, which is the same
 # top of tree for which it was built.  If $T is non-empty, then
@@ -87,8 +175,8 @@ CALC_FILES= README bigprime.cal deg.cal ellip.cal lucas.cal lucas_chk.cal \
 	test2700.cal test3100.cal test3300.cal test3400.cal prompt.cal \
 	test3500.cal seedrandom.cal test4000.cal test4100.cal test4600.cal \
 	beer.cal hello.cal test5100.cal test5200.cal randombitrun.cal \
-	randomrun.cal xx_print.cal natnumset.cal qtime.cal test8400.cal \
-	test8500.cal test8600.cal chi.cal intfile.cal
+	randomrun.cal repeat.cal xx_print.cal natnumset.cal qtime.cal \
+	test8400.cal test8500.cal test8600.cal chi.cal intfile.cal
 
 # These files are found (but not built) in the distribution
 #
@@ -120,8 +208,10 @@ all: ${CALC_FILES} ${MAKE_FILE} .all
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q}for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo cal/$$i; \
+	    fi; \
 	done
 
 distdir:
@@ -141,8 +231,10 @@ calcliblist:
 ##
 
 echo_inst_files:
-	${Q}for i in ${CALC_FILES}; do \
-	    echo __file__ ${CSHAREDIR}/$$i; \
+	${Q}for i in ${CALC_FILES} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CALC_SHAREDIR}/$$i; \
+	    fi; \
 	done
 
 ##
@@ -157,38 +249,29 @@ clobber:
 	rm -f .all
 
 install: all
-	-${Q}if [ ! -d $T${SHAREDIR} ]; then \
-	    echo mkdir $T${SHAREDIR}; \
-	    mkdir $T${SHAREDIR}; \
-	    if [ ! -d "$T${SHAREDIR}" ]; then \
-		echo mkdir -p "$T${SHAREDIR}"; \
-		mkdir -p "$T${SHAREDIR}"; \
+	-${Q}if [ ! -d $T${CALC_SHAREDIR} ]; then \
+	    echo mkdir $T${CALC_SHAREDIR}; \
+	    mkdir $T${CALC_SHAREDIR}; \
+	    if [ ! -d "$T${CALC_SHAREDIR}" ]; then \
+		echo mkdir -p "$T${CALC_SHAREDIR}"; \
+		mkdir -p "$T${CALC_SHAREDIR}"; \
 	    fi; \
-	    echo ${CHMOD} 0755 $T${SHAREDIR}; \
-	    ${CHMOD} 0755 $T${SHAREDIR}; \
+	    echo ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
+	    ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d $T${CSHAREDIR} ]; then \
-	    echo mkdir $T${CSHAREDIR}; \
-	    mkdir $T${CSHAREDIR}; \
-	    if [ ! -d "$T${CSHAREDIR}" ]; then \
-		echo mkdir -p "$T${CSHAREDIR}"; \
-		mkdir -p "$T${CSHAREDIR}"; \
+	${Q}for i in ${CALC_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
 	    fi; \
-	    echo ${CHMOD} 0755 $T${CSHAREDIR}; \
-	    ${CHMOD} 0755 $T${CSHAREDIR}; \
-	else \
-	    true; \
-	fi
-	${Q}for i in ${CALC_FILES}; do \
-	    if ${CMP} -s $$i $T${CSHAREDIR}/$$i; then \
+	    if ${CMP} -s $$i $T${CALC_SHAREDIR}/$$i; then \
 		true; \
 	    else \
-		rm -f $T${CSHAREDIR}/$$i.new; \
-		cp -f $$i $T${CSHAREDIR}/$$i.new; \
-		${CHMOD} 0444 $T${CSHAREDIR}/$$i.new; \
-		mv -f $T${CSHAREDIR}/$$i.new $T${CSHAREDIR}/$$i; \
-		echo "installed $T${CSHAREDIR}/$$i"; \
+		rm -f $T${CALC_SHAREDIR}/$$i.new; \
+		cp -f $$i $T${CALC_SHAREDIR}/$$i.new; \
+		${CHMOD} 0444 $T${CALC_SHAREDIR}/$$i.new; \
+		mv -f $T${CALC_SHAREDIR}/$$i.new $T${CALC_SHAREDIR}/$$i; \
+		echo "installed $T${CALC_SHAREDIR}/$$i"; \
 	    fi; \
 	done

cal/README

@@ -480,6 +480,16 @@ randrun.cal
 
     This tests the a55 generator.
 
+repeat.cal
+
+    repeat(digit_set, repeat_count)
+
+    Return the value of the digit_set repeated repeat_count times.
+    Both digit_set and repeat_count must be integers > 0.
+
+    For example repeat(423,5) returns the value 423423423423423,
+    which is the digit_set 423 repeated 5 times.
+
 
 regress.cal
 
@@ -815,8 +825,8 @@ xx_print.cal
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.8 $
-## @(#) $Id: README,v 29.8 2001/03/31 16:26:23 chongo Exp $
+## @(#) $Revision: 29.9 $
+## @(#) $Id: README,v 29.9 2003/01/05 08:10:56 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/README,v $
 ##
 ## Under source code control:	1990/02/15 01:50:32

cal/deg.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: deg.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: deg.cal,v 29.4 2003/01/26 19:32:41 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/deg.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:33
@@ -42,7 +42,7 @@ define dms(deg, min, sec)
 	ans.deg = deg;
 	ans.min = min;
 	ans.sec = sec;
-	fixdms(&ans);
+	fixdms(ans);
 	return ans;
 }
 
@@ -66,7 +66,7 @@ define dms_add(a, b)
 		ans.sec += b.sec;
 	} else
 		ans.deg += b;
-	fixdms(&ans);
+	fixdms(ans);
 	return ans;
 }
 
@@ -75,9 +75,9 @@ define dms_neg(a)
 {
 	local obj dms	ans;
 
-	ans.deg = -ans.deg;
-	ans.min = -ans.min;
-	ans.sec = -ans.sec;
+	ans.deg = -a.deg;
+	ans.min = -a.min;
+	ans.sec = -a.sec;
 	return ans;
 }
 
@@ -103,7 +103,7 @@ define dms_mul(a, b)
 		ans.min = b.min * a;
 		ans.sec = b.sec * a;
 	}
-	fixdms(&ans);
+	fixdms(ans);
 	return ans;
 }
 

cal/lucas.cal

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.5 $
- * @(#) $Id: lucas.cal,v 29.5 2001/06/08 20:07:29 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: lucas.cal,v 29.6 2002/07/10 09:43:46 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/lucas.cal,v $
  *
  * Under source code control:	1990/05/03 16:49:51
@@ -90,7 +90,7 @@
  *
  *	test numbers of the form h*2^n-1
  *	fix a value of n and vary the value h
- *	n mod 128 == 0
+ *	n mod 2^x == 0  for some value of x, say > 7 or more
  *	h*2^n-1 is not divisible by any small prime < 2^40
  *	0 < h < 2^39
  *	h*2^n+1 is not divisible by any small prime < 2^40

cal/regress.cal

@@ -1,7 +1,7 @@
 /*
  * regress - calc regression and correctness test suite
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 1999-2003  David I. Bell and Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.10 $
- * @(#) $Id: regress.cal,v 29.10 2001/04/14 22:53:57 chongo Exp $
+ * @(#) $Revision: 29.17 $
+ * @(#) $Id: regress.cal,v 29.17 2003/06/10 21:17:55 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/regress.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:36
@@ -52,7 +52,8 @@ errmax(-1),;				/* prevent errcount from abouting */
 global ecnt;				/* expected value of errcount() */
 ecnt = 0;				/* clear expected errcount() value */
 
-initcfg = config("all", "oldstd");	/* set config to startup default */
+initcfg = config("all", "newstd");	/* set config to startup default */
+defcfg = config("all");			/* capture the default config */
 config("resource_debug", 0),;		/* disable resource startup messages */
 config("calc_debug", 0),;		/* disable internal debugging */
 config("verbose_quit", 0),;		/* disable quit messages */
@@ -380,19 +381,19 @@ define test_config()
 	/* check the set and return of all config */
 	callcfg = config("all");
 	print				'501: callcfg = config("all")';
+	vrfy(callcfg == startcfg,	'502: callcfg == startcfg');
+
 	callcfg = config("all", "oldstd");
-	print				'502: callcfg = config("all","oldstd")';
-	oldcfg = config("all", "newstd");
-	print				'503: oldcfg = config("all","newstd")';
+	print				'503: callcfg = config("all","oldstd")';
 	vrfy(callcfg == startcfg,	'504: callcfg == startcfg');
-	newcfg = config("all");
-	print				'505: newcfg = config("all")';
-	vrfy(config("all") == newcfg,	'506: config("all") == newcfg');
-	vrfy(config("all", oldcfg) == newcfg,
-					'507: config("all", oldcfg) == newcfg');
+	oldcfg = config("all");
+	print				'505: oldcfg = config("all");';
+	vrfy(config("all") == oldcfg,	'506: config("all") == oldcfg');
+	vrfy(oldcfg==config("all","newstd"),
+					'507: oldcfg==config("all","newstd")');
+	vrfy(defcfg == config("all"),	'508: defcfg == config("all")');
 
 	/* vrfy the state of the default config */
-	vrfy(config("all") == oldcfg,	'508: config("all") == oldcfg');
 	vrfy(config("mode") == "real",
 					'509: config("mode") == "real"');
 	vrfy(config("display") == 20,
@@ -429,58 +430,59 @@ define test_config()
 					'525: config("cfappr") == 0');
 	vrfy(config("cfsim") == 8,
 					'526: config("cfsim") == 8');
-	vrfy(config("outround") == 2,
-					'527: config("outround") == 2');
+	vrfy(config("outround") == 24,
+					'527: config("outround") == 24');
 	vrfy(config("round") == 24,
 					'528: config("round") == 24');
-	vrfy(config("leadzero") == 0,
-					'529: config("leadzero") == 0');
+	vrfy(config("leadzero") == 1,
+					'529: config("leadzero") == 1');
 	vrfy(config("fullzero") == 0,
 					'530: config("fullzero") == 0');
 	vrfy(config("maxscan") == 20,
 					'531: config("maxscan") == 20');
-	vrfy(config("prompt") == "> ",
-					'532: config("prompt") == "> "');
-	vrfy(config("more") == ">> ",
-					'533: config("more") == ">> "');
+	vrfy(config("prompt") == "; ",
+					'532: config("prompt") == "; "');
+	vrfy(config("more") == ";; ",
+					'533: config("more") == ";; "');
 
-	/* convert to "newstd" config by individual changes */
-	vrfy(config("display", 10) == 20,
-					'534: config("display") == 20');
-	vrfy(config("epsilon",1e-10)==1e-20,
-					'535: config("epsilon",1e-10)==1e-20');
-	vrfy(config("quo", 0) == 2,	'536: config("quo", 0) == 2');
-	vrfy(config("outround", 24) == 2,
-					'537: config("outround", 24) == 2');
-	vrfy(config("leadzero","y") == 0,
-				'538: config("leadzero","y") == 0');
-	vrfy(config("fullzero", 1) == 0,
-				'539: config("fullzero", 1) == 0');
-	vrfy(config("prompt", "; ") == "> ",
-					'540: config("prompt", "; ") == "> "');
-	vrfy(config("more", ";; ") == ">> ",
-					'541: config("more", ";; ") == ">> "');
-	vrfy(config("all") == newcfg,	'542: config("all") == newcfg');
+	/* convert to "oldstd" config by individual changes */
+	print				'534: test unused';
+	vrfy(config("outround", 2) == 24,
+					'535: config("outround", 2) == 24');
+	vrfy(config("leadzero","n") == 1,
+					'536: config("leadzero","n") == 1');
+	print				'537: test unused';
+	vrfy(config("prompt", "> ") == "; ",
+					'538: config("prompt", "> ") == "; "');
+	vrfy(config("more", ">> ") == ";; ",
+					'539: config("more", ">> ") == ";; "');
+	vrfy(config("all") == oldcfg,	'540: config("all") == oldcfg');
 
-	/* check on the new config("fullzero") effect */
-	vrfy(config("all","oldstd") == newcfg,
-					'543: config("all",callcfg) == newcfg');
+	/* restore the configation at the start of this function */
+	vrfy(config("all",callcfg) == oldcfg,
+					'541: config("all",callcfg) == oldcfg');
+
+	/* display and fullzero tests */
 	vrfy(config("display",2) == 20,
-					'544: config("display",2) == 20');
+					'542: config("display",2) == 20');
+	vrfy(config("leadzero",0) == 1,
+					'543: config("leadzero",0) == 1');
 	vrfy(config("fullzero",1) == 0,
-					'545: config("fullzero",1) == 0');
+					'544: config("fullzero",1) == 0');
 	vrfy(strprintf("%d %d %d", 0, 1, 2) == ".00 1.00 2.00",
-		'546: strprintf("%d %d %d", 0, 1, 2) == ".00 1.00 2.00"');
+		'545: strprintf("%d %d %d", 0, 1, 2) == ".00 1.00 2.00"');
 	vrfy(config("display",20) == 2,
-					'547: config("display",20) == 2');
-	vrfy(config("fullzero",0),
-					'548: config("fullzero",0)');
+					'546: config("display",20) == 2');
+	vrfy(config("leadzero",1) == 0,
+					'547: config("leadzero",1) == 0');
+	vrfy(config("fullzero",0) == 1,
+					'548: config("fullzero",0) == 1');
 	vrfy(strprintf("%d %d %d", 0, 1, 2) == "0 1 2",
 		'549: strprintf("%d %d %d", 0, 1, 2) == "0 1 2"');
 
 	/* restore calling config */
-	vrfy(config("all",callcfg) == oldcfg,
-					'550: config("all",callcfg) == oldcfg');
+	vrfy(config("all",callcfg) == startcfg,
+		'550: config("all",callcfg) == startcfg');
 	vrfy(config("all") == callcfg,	'551: config("all") == callcfg');
 	vrfy(config("all") == startcfg, '552: config("all") == startcfg');
 
@@ -492,7 +494,11 @@ define test_config()
 	vrfy(strlen(config("version")) > 0,
 					'555: strlen(config("version")) > 0');
 
-	print '556: Ending test_config';
+	/* mode2 is off by default */
+	vrfy(config("mode2") == "off",
+					'556: config("mode2") == "off"');
+
+	print '557: Ending test_config';
 }
 print '010: parsed test_config()';
 
@@ -755,7 +761,7 @@ define test_functions()
 	vrfy(den(17) == 1,		'712: den(17) == 1');
 	vrfy(den(3/7) == 7,		'713: den(3/7) == 7');
 	vrfy(den(-2/3) == 3,		'714: den(-2/3) == 3');
-	vrfy(digits(0) == 0,		'715: digits(0) == 0');
+	vrfy(digits(0) == 1,		'715: digits(0) == 1');
 	vrfy(digits(9) == 1,		'716: digits(9) == 1');
 	vrfy(digits(10) == 2,		'717: digits(10) == 2');
 	vrfy(digits(-691) == 3,		'718: digits(-691) == 3');
@@ -1034,8 +1040,8 @@ define test_functions()
 	vrfy(digit(a,-1) == 4,		'974: digit(a,-1) == 4');
 	vrfy(digit(a,-2) == 2,		'975: digit(a,-2) == 2');
 	vrfy(digit(a,-3) == 8,		'976: digit(a,-3) == 8');
-	vrfy(digits(0) == 0,		'977: digits(0) == 0');
-	vrfy(digits(0.0123) == 0,	'978: digits(0.0123) == 0');
+	vrfy(digits(0) == 1,		'977: digits(0) == 1');
+	vrfy(digits(0.0123) == 1,	'978: digits(0.0123) == 1');
 	vrfy(digits(3.7) == 1,		'979: digits(3.7) == 1');
 	vrfy(digits(-27) == 2,		'980: digits(-27) == 2');
 	vrfy(digits(-99.7) == 2,	'981: digits(-99.7) == 2');
@@ -1793,7 +1799,23 @@ define test_mode()
 	vrfy(str(3e9) == "3000000000", \
 		'1650: str(3e9) == \"3000000000\"');
 
-	print '1651: Ending mode/base test';
+	/* test base2() functionality */
+	vrfy(base2() == 0,		'1651: base2() == 0');
+	vrfy(base2(0) == 0,		'1652: base2(0) == 0');
+	vrfy(base2() == 0,		'1653: base2() == 0');
+	vrfy(base2(16) == 0,		'1654: base2(16) == 0');
+	vrfy(base2() == 16,		'1655: base2() == 16');
+	vrfy(str(3e9) == "3000000000 /* 0xb2d05e00 */",
+		'1656: str(3e9) == "3000000000 /* 0xb2d05e00 */"');
+	vrfy(base2(1/3) == 16,		'1657: base2(16) == 16');
+	vrfy(str(23209) == "23209 /* 23209 */",
+		'1658: str(23209) == "23209 /* 23209 */"');
+	vrfy(str(3/2) == "1.5 /* 3/2 */",
+		'1659: str(3/2) == "1.5 /* 3/2 */"');
+	vrfy(base() == 10,		'1660: base() == 10');
+	vrfy(base2(0) == 1/3,		'1661: base2(0) == 1/3');
+
+	print '1662: Ending mode/base test';
 }
 print '026: parsed test_mode()';
 
@@ -4547,7 +4569,14 @@ define test_random()
 	vrfy(seed() < 2^64,		  '5465: seed() < 2^64');
 	vrfy(israndom(srandom(seed())),	  '5466: israndom(srandom(seed()))');
 
-	print '5467: Ending test_random';
+	/* verify random(10,11) double bug fix */
+	vrfy(random(10,11) == 10,	  '5467: random(10,11) == 10');
+	vrfy(random(10,11) == 10,	  '5468: random(10,11) == 10');
+	vrfy(random(10,11) == 10,	  '5469: random(10,11) == 10');
+	vrfy(random(0,1) == 0,		  '5470: random(0,1) == 0');
+	vrfy(random(0,1) == 0,		  '5471: random(0,1) == 0');
+
+	print '5472: Ending test_random';
 }
 print '137: parsed test_random()';
 

cal/repeat.cal

@@ -0,0 +1,53 @@
+/*
+ * repeat - return the value of a repeated set of digits
+ *
+ * Copyright (C) 2003  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: repeat.cal,v 29.4 2003/01/26 19:42:03 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/repeat.cal,v $
+ *
+ * Under source code control:	2003/01/05 00:00:01
+ * File existed as early as:	2003
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+/*
+ * repeat - return the value of a repeated set of digits
+ *
+ * usage:
+ *	repeat(digit_set, repeat_count)
+ */
+define repeat(digit_set, repeat_count)
+{
+    local digit_count;	/* digits in the digit_set */
+
+    /* firewall */
+    if (!isint(digit_set) || digit_set <= 0) {
+	quit "digit set must be an integer > 0";
+    }
+    if (!isint(repeat_count) || repeat_count <= 0) {
+	quit "repeat count must be an integer > 0";
+    }
+
+    /* return repeated set of digits */
+    digit_count = digits(digit_set);
+    return digit_set * (10^(digit_count*repeat_count)-1) / (10^digit_count-1);
+}

calc.c

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.8 $
- * @(#) $Id: calc.c,v 29.8 2001/04/10 22:03:13 chongo Exp $
+ * @(#) $Revision: 29.9 $
+ * @(#) $Id: calc.c,v 29.9 2003/08/26 04:36:10 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.c,v $
  *
  * Under source code control:	1990/02/15 01:48:11
@@ -214,7 +214,13 @@ main(int argc, char **argv)
 					havearg = TRUE;
 					break;
 				case 'n':
-					new_std = TRUE;
+					/*
+					 * -n is deprecated and may be reused
+					 * for another purpose in the future
+					 */
+					break;
+				case 'O':
+					use_old_std = TRUE;
 					break;
 				case 'p':
 					p_flag = TRUE;
@@ -425,7 +431,7 @@ main(int argc, char **argv)
 					fprintf(stderr,
 		"usage: %s [-a] [-c] [-C] [-d] [-e] [-h] [-i] [-m mode]\n"
 		"\t[-D calc_debug[:resource_debug[:user_debug]]]\n"
-		"\t[-n] [-p] [-q] [-u] [-v] "
+		"\t[-O] [-p] [-q] [-u] [-v] "
 		"[--] [calc_cmd ...]\n",
 		program);
 					exit(1);

calc.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.9 $
- * @(#) $Id: calc.h,v 29.9 2001/12/11 02:28:47 chongo Exp $
+ * @(#) $Revision: 29.11 $
+ * @(#) $Id: calc.h,v 29.11 2003/08/26 04:36:10 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.h,v $
  *
  * Under source code control:	1990/02/15 01:48:31
@@ -60,7 +60,11 @@
 #define HOMECHAR	'~'	/* char which indicates home directory */
 #define DOTCHAR		'.'	/* char which indicates current directory */
 #define PATHCHAR	'/'	/* char which separates path components */
+#if defined(__MSDOS__) || defined(__WIN32)
+#define LISTCHAR	';'	/* char which separates paths in a list */
+#else
 #define LISTCHAR	':'	/* char which separates paths in a list */
+#endif
 #define MAXCMD		16384	/* maximum length of command invocation */
 #define MAXERROR	512	/* maximum length of error message string */
 
@@ -228,7 +232,7 @@ extern DLL char *program;	/* our name (argv[0]) */
 
 extern DLL int no_env;		/* TRUE (-e) => ignore env vars on startup */
 extern DLL int errmax;	/* if >= 0, error when errcount exceeds errmax */
-extern DLL int new_std;		/* TRUE (-n) => use newstd configuration */
+extern DLL int use_old_std;	/* TRUE (-O) => use classic configuration */
 
 extern DLL int allow_read;	/* FALSE => dont open any files for reading */
 extern DLL int allow_write; 	/* FALSE => dont open any files for writing */

calc.man

@@ -15,8 +15,8 @@
 .\" received a copy with calc; if not, write to Free Software Foundation, Inc.
 .\" 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 .\"
-.\" @(#) $Revision: 29.7 $
-.\" @(#) $Id: calc.man,v 29.7 2001/06/01 11:26:53 chongo Exp $
+.\" @(#) $Revision: 29.11 $
+.\" @(#) $Id: calc.man,v 29.11 2003/08/26 04:36:10 chongo Exp $
 .\" @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.man,v $
 .\"
 .\" Under source code control:	    1991/07/23 05:48:26
@@ -44,7 +44,7 @@ calc \- arbitrary precision calculator
 .RB [ \-h ]
 .RB [ \-i ]
 .RB [ \-m\ \&mode ]
-.RB [ \-n ]
+.RB [ \-O ]
 .br
 .RB [ \-p ]
 .RB [ \-q ]
@@ -54,7 +54,7 @@ calc \- arbitrary precision calculator
 .RB [ calc_cmd\ \&.\|.\|. ]
 .in -5n
 .sp
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ [other_flags\ \&...]
+\fI#!${BINDIR}/calc\fP\ \fB\-f\fP\ [other_flags\ \&...]
 .SH DESCRIPTION
 \&
 .br
@@ -302,11 +302,22 @@ The reading of key bindings is also disabled
 when the mode disables opening of files for reading.
 
 .TP
-.B \-n
-Use the new configuration defaults instead of the old
-default classic defaults.
+.B \-O
+Use the old classic defaults instead of the
+default configuration.
 This flag as the same effect
-as executing \fBconfig("all", "newcfg")\fP at startup time.
+as executing \fBconfig("all", "oldcfg")\fP at startup time.
+.sp 1
+NOTE: Older versions of calc used
+.B \-n
+to setup a modified form of the default calc configuration.
+The
+.B \-n
+flag currently does nothing.
+Use of the
+.B \-n
+flag is now deprecated and may be used for
+something else in the future.
 
 .TP
 .B \-p
@@ -514,8 +525,8 @@ searches in succession:
 ./myfile.cal
 ${LIBDIR}/myfile
 ${LIBDIR}/myfile.cal
-${CUSTOMLIBDIR}/myfile
-${CUSTOMLIBDIR}/myfile.cal
+${CUSTOMCALDIR}/myfile
+${CUSTOMCALDIR}/myfile.cal
 .fi
 .in -5n
 .sp 1
@@ -572,27 +583,25 @@ If first line of an executable file begins
 followed by the absolute pathname of the
 .B calc
 program and the flag
-.B \-S
+.B \-f
 as in:
 .sp 1
 .in +5n
 .nf
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ [other_flags\ \&...]
+\fI#!${BINDIR}/calc\fP\ \fB\-f\fP\ [other_flags\ \&...]
 .fi
 .in -5n
 .sp 1
 the rest of the file will be processed in
 .BR "shell script mode" .
 Note that
-.B \-S
-(UPPER CASE
-.BR \-S )
+.B \-f
 must be the first \-flag on the ``#!'' line.
 Any other optional
 .B "other_flags"
 must come after
 the
-.BR \-S .
+.BR \-f .
 .sp 1
 In
 .B "shell script mode"
@@ -625,7 +634,7 @@ the file
 .sp 1
 .in +5n
 .nf
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ \&\fB\-q\fP
+\fI#!${BINDIR}/calc\fP\ \fB\-f\fP\ \&\fB\-q\fP
 #
 # mersenne - an example of a calc \fBshell script file\fP
 
@@ -839,7 +848,7 @@ ${LIBDIR}/bindings
 non-GNU-readline command line editor bindings
 .sp 1
 .TP 5
-${INCDIRCALC}/*.h
+${CALC_INCDIR}/*.h
 include files for C interface use
 .sp 1
 .TP 5
@@ -851,7 +860,7 @@ ${LIBDIR}/libcustcalc.a
 custom binary link library
 .sp 1
 .TP 5
-${CUSTOMLIBDIR}/*.cal
+${CUSTOMCALDIR}/*.cal
 custom resource files
 .sp 1
 .TP 5
@@ -1088,7 +1097,7 @@ Landon Noll maintains the the
 web site is located at:
 .sp
 .in +0.5i
-http://www.isthe.com/chongo/tech/comp/calc/
+www.isthe.com/chongo/tech/comp/calc/
 .in -0.5i
 .sp
 Share and Enjoy! :\-)

calc.spec.in

@@ -0,0 +1,116 @@
+#****h* calc/calc.spec.in
+#
+# calc.spec.in - template specfile for calc
+#
+# Copyright (C) 2003  Petteri Kettunen and Landon Curt Noll
+#
+# Calc is open software; you can redistribute it and/or modify it under
+# the terms of the version 2.1 of the GNU Lesser General Public License
+# as published by the Free Software Foundation.
+#
+# Calc is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+# Public License for more details.
+#
+# A copy of version 2.1 of the GNU Lesser General Public License is
+# distributed with calc under the filename COPYING-LGPL.  You should have
+# received a copy with calc; if not, write to Free Software Foundation, Inc.
+# 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+#
+# @(#) $Revision: 29.12 $
+# @(#) $Id: calc.spec.in,v 29.12 2003/04/15 03:37:59 chongo Exp $
+# @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.spec.in,v $
+#
+# Under source code control:	2003/02/16 20:21:39
+# File existed as early as:	2003
+#
+# calculator by David I. Bell with help/mods from others
+# Makefile by Petteri Kettunen with modifications from Landon Curt Noll
+
+# BUGS
+#  - Uninstalling calc and calc-devel leaves empty dirs /usr/include/calc
+#    and /usr/share/calc and its subdird. In case e.g. %{_includedir}/calc
+#    is defined in `%files devel' section, then rpmbuild complains that
+#    header files are defined twice - rpmbuild bug or bug in specfile conf???
+
+Summary: Arbitrary precision calculator.
+Name: calc
+Version: <<<PROJECT_VERSION>>>
+Release: 0
+Copyright: LGPL
+Group: Applications/Engineering
+Source: %{name}-%{version}.tar.gz
+URL: http://www.isthe.com/chongo/tech/comp/calc/index.html
+Requires: ncurses >= 5.2-26, readline >= 4.2, less >= 358
+BuildRequires: ncurses-devel >= 5.2-26, readline-devel >= 4.2
+BuildRoot: %{_tmppath}/%{name}-root
+
+%description
+Calc is arbitrary precision C-like arithmetic system that is a
+calculator, an algorithm prototyper and mathematical research
+tool. Calc comes with a rich set of builtin mathematical and
+programmatic functions.
+
+For the latest calc release, see the project home page:
+
+    http://www.isthe.com/chongo/tech/comp/calc/index.html
+
+%package devel
+Summary: Development files and documentation for calc.
+Group: Development/Libraries
+PreReq: %{name} = %{version}-%{release}
+
+%description devel
+This package contains the header files and static libraries for developing
+calc (arbitrary precision calculator).
+
+For the latest calc release, see the project home page:
+
+    http://www.isthe.com/chongo/tech/comp/calc/index.html
+
+%prep
+%setup -q
+
+%build
+make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 all chk
+
+%install
+rm -rf %{buildroot}
+mkdir -p %{buildroot}
+make T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 install
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-, root, root)
+%doc BUGS CHANGES COPYING COPYING-LGPL
+%{_bindir}/*
+%{_mandir}/man1/*
+%{_datadir}/%{name}/*/*
+%{_datadir}/%{name}/bindings
+%{_datadir}/%{name}/README
+%{_datadir}/%{name}/*.cal
+
+%files devel
+%defattr(-, root, root)
+%doc BUGS COPYING COPYING-LGPL LIBRARY
+%attr(644, root, root) %{_includedir}/calc/*
+%attr(644, root, root) %{_libdir}/*.a
+
+%changelog
+* Wed Feb 26 2003 Landon Curt Noll http://www.isthe.com/chongo
+- Release of calc-2.11.7-2
+- Fixed attributes on include and lib calc-devel files
+- Added BUGS to calc-devel as well as calc
+* Tue Feb 25 2003 Landon Curt Noll http://www.isthe.com/chongo
+- Release of calc-2.11.7-1
+- Require ncurses, readline and less to install.
+- Require ncurses-devel and readline-devel to build.
+* Tue Feb 18 2003 Landon Curt Noll http://www.isthe.com/chongo
+- Misc changes to fit local directory setup
+* Sun Feb 16 2003 Petteri Kettunen <petterik@users.sourceforge.net>
+- initial RPM build
+
+#****

cmath.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.5 $
- * @(#) $Id: cmath.h,v 29.5 2001/06/08 21:00:58 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: cmath.h,v 29.6 2002/03/12 09:38:26 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/cmath.h,v $
  *
  * Under source code control:	1993/07/30 19:42:45
@@ -62,6 +62,7 @@ extern void cprintfr(COMPLEX *c);
 /*
  * Basic numeric routines.
  */
+
 extern COMPLEX *cadd(COMPLEX *c1, COMPLEX *c2);
 extern COMPLEX *csub(COMPLEX *c1, COMPLEX *c2);
 extern COMPLEX *cmul(COMPLEX *c1, COMPLEX *c2);
@@ -74,8 +75,8 @@ extern COMPLEX *cscale(COMPLEX *c, long i);
 extern COMPLEX *cshift(COMPLEX *c, long i);
 extern COMPLEX *csquare(COMPLEX *c);
 extern COMPLEX *cconj(COMPLEX *c);
-extern COMPLEX *creal(COMPLEX *c);
-extern COMPLEX *cimag(COMPLEX *c);
+extern COMPLEX *c_real(COMPLEX *c);
+extern COMPLEX *c_imag(COMPLEX *c);
 extern COMPLEX *cneg(COMPLEX *c);
 extern COMPLEX *cinv(COMPLEX *c);
 extern COMPLEX *cint(COMPLEX *c);

codegen.c

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.6 $
- * @(#) $Id: codegen.c,v 29.6 2001/05/08 06:29:24 chongo Exp $
+ * @(#) $Revision: 29.7 $
+ * @(#) $Id: codegen.c,v 29.7 2002/07/10 11:51:51 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/codegen.c,v $
  *
  * Under source code control:	1990/02/15 01:48:13
@@ -45,7 +45,7 @@
 #include "func.h"
 #include "conf.h"
 
-#if defined(_WIN32)
+#if defined(_WIN32) && !defined(__CYGWIN__)
 # include <direct.h>
 #endif
 

commath.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: commath.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: commath.c,v 29.3 2002/03/12 09:38:26 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/commath.c,v $
  *
  * Under source code control:	1990/02/15 01:48:10
@@ -381,7 +381,7 @@ cconj(COMPLEX *c)
  * Return the real part of a complex number.
  */
 COMPLEX *
-creal(COMPLEX *c)
+c_real(COMPLEX *c)
 {
 	COMPLEX *r;
 
@@ -400,7 +400,7 @@ creal(COMPLEX *c)
  * Return the imaginary part of a complex number as a real.
  */
 COMPLEX *
-cimag(COMPLEX *c)
+c_imag(COMPLEX *c)
 {
 	COMPLEX *r;
 

config.c

@@ -1,7 +1,7 @@
 /*
  * config - configuration routines
  *
- * Copyright (C) 1999  David I. Bell and Landon Curt Noll
+ * Copyright (C) 1999-2002  David I. Bell and Landon Curt Noll
  *
  * Primary author:  David I. Bell
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.7 $
- * @(#) $Id: config.c,v 29.7 2001/04/25 07:15:22 chongo Exp $
+ * @(#) $Revision: 29.10 $
+ * @(#) $Id: config.c,v 29.10 2003/08/26 04:36:10 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/config.c,v $
  *
  * Under source code control:	1991/07/20 00:21:56
@@ -51,6 +51,7 @@
 NAMETYPE configs[] = {
 	{"all",		CONFIG_ALL},
 	{"mode",	CONFIG_MODE},
+	{"mode2",	CONFIG_MODE2},
 	{"display",	CONFIG_DISPLAY},
 	{"epsilon",	CONFIG_EPSILON},
 	/*epsilonprec -- tied to epsilon not a configuration type*/
@@ -101,6 +102,7 @@ NAMETYPE configs[] = {
  */
 CONFIG oldstd = {	/* backward compatible standard configuration */
 	MODE_INITIAL,		/* current output mode */
+	MODE2_INITIAL,		/* current secondary output mode */
 	20,			/* current output digits for float or exp */
 	NULL,	/* loaded in at startup - default error for real functions */
 	EPSILONPREC_DEFAULT,	/* binary precision of epsilon */
@@ -146,9 +148,10 @@ CONFIG oldstd = {	/* backward compatible standard configuration */
 };
 CONFIG newstd = {	/* new non-backward compatible configuration */
 	MODE_INITIAL,		/* current output mode */
-	10,			/* current output digits for float or exp */
+	MODE2_INITIAL,		/* current output mode */
+	20,			/* current output digits for float or exp */
 	NULL,	/* loaded in at startup - default error for real functions */
-	NEW_EPSILONPREC_DEFAULT,	/* binary precision of epsilon */
+	EPSILONPREC_DEFAULT,	/* binary precision of epsilon */
 	FALSE,			/* tracing flags */
 	MAXPRINT_DEFAULT,	/* number of elements to print */
 	MUL_ALG2,		/* size of number to use multiply alg 2 */
@@ -158,7 +161,7 @@ CONFIG newstd = {	/* new non-backward compatible configuration */
 	TRUE,			/* ok to print a tilde on approximations */
 	TRUE,			/* ok to print tab before numeric values */
 	0,			/* quomod() default rounding mode */
-	0,			/* quotient // default rounding mode */
+	2,			/* quotient // default rounding mode */
 	0,			/* mod % default rounding mode */
 	24,			/* sqrt() default rounding mode */
 	24,			/* appr() default rounding mode */
@@ -167,7 +170,7 @@ CONFIG newstd = {	/* new non-backward compatible configuration */
 	24,			/* output default rounding mode */
 	24,			/* round()/bround() default rounding mode */
 	TRUE,			/* ok to print leading 0 before decimal pt */
-	1,			/* ok to print trailing 0's */
+	0,			/* ok to print trailing 0's */
 	MAXSCANCOUNT,		/* max scan errors before abort */
 	"; ",			/* normal prompt */
 	";; ",			/* prompt when inside multi-line input */
@@ -212,6 +215,7 @@ static NAMETYPE modes[] = {
 	{"oct",		MODE_OCTAL},
 	{"binary",	MODE_BINARY},
 	{"bin",		MODE_BINARY},
+	{"off",		MODE2_OFF},
 	{NULL,		0}
 };
 
@@ -467,6 +471,19 @@ setconfig(int type, VALUE *vp)
 		math_setmode((int) temp);
 		break;
 
+	case CONFIG_MODE2:
+		if (vp->v_type != V_STR) {
+			math_error("Non-string for mode");
+			/*NOTREACHED*/
+		}
+		temp = lookup_long(modes, vp->v_str->s_str);
+		if (temp < 0) {
+			math_error("Unknown mode \"%s\"", vp->v_str);
+			/*NOTREACHED*/
+		}
+		math_setmode2((int) temp);
+		break;
+
 	case CONFIG_EPSILON:
 		if (vp->v_type != V_NUM) {
 			math_error("Non-numeric for epsilon");
@@ -1018,6 +1035,16 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		vp->v_str = makenewstring(p);
 		return;
 
+	case CONFIG_MODE2:
+		vp->v_type = V_STR;
+		p = lookup_name(modes, cfg->outmode2);
+		if (p == NULL) {
+			math_error("invalid secondary output mode: %d", cfg->outmode2);
+			/*NOTREACHED*/
+		}
+		vp->v_str = makenewstring(p);
+		return;
+
 	case CONFIG_EPSILON:
 		vp->v_num = qlink(cfg->epsilon);
 		return;
@@ -1267,6 +1294,7 @@ config_cmp(CONFIG *cfg1, CONFIG *cfg2)
 	return cfg1->traceflags != cfg2->traceflags ||
 	       cfg1->outdigits != cfg2->outdigits ||
 	       cfg1->outmode != cfg2->outmode ||
+	       cfg1->outmode2 != cfg2->outmode2 ||
 	       qcmp(cfg1->epsilon, cfg2->epsilon) ||
 	       cfg1->epsilonprec != cfg2->epsilonprec ||
 	       cfg1->maxprint != cfg2->maxprint ||

config.h

@@ -1,7 +1,7 @@
 /*
  * config - configuration routines
  *
- * Copyright (C) 1999  Landon Curt Noll and David I. Bell
+ * Copyright (C) 1999-2002  Landon Curt Noll and David I. Bell
  *
  * Primary author:  Landon Curt Noll
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.11 $
- * @(#) $Id: config.h,v 29.11 2001/06/08 21:00:58 chongo Exp $
+ * @(#) $Revision: 29.13 $
+ * @(#) $Id: config.h,v 29.13 2003/08/26 04:36:10 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/config.h,v $
  *
  * Under source code control:	1995/11/01 22:20:17
@@ -90,6 +90,7 @@
 #define CONFIG_BASENAME 36
 #define CONFIG_VERSION 37
 #define CONFIG_WINDOWS 38
+#define CONFIG_MODE2	39
 
 
 /*
@@ -98,8 +99,6 @@
 #define DISPLAY_DEFAULT 20	/* default digits for float display */
 #define EPSILON_DEFAULT "1e-20" /* allowed error for float calculations */
 #define EPSILONPREC_DEFAULT 67	/* 67 ==> 2^-67 <= EPSILON_DEFAULT < 2^-66 */
-#define NEW_EPSILON_DEFAULT "1e-10"	/* newstd EPSILON_DEFAULT */
-#define NEW_EPSILONPREC_DEFAULT 34	/* 34 ==> 2^-34 <= 1e-10 < 2^-33 */
 #define MAXPRINT_DEFAULT 16	/* default number of elements printed */
 #define MAXSCANCOUNT 20		/* default max scan errors before an abort */
 
@@ -118,6 +117,7 @@
  */
 struct config {
 	int outmode;		/* current output mode */
+	int outmode2;		/* current secondary output mode */
 	LEN outdigits;		/* current output digits for float or exp */
 	NUMBER *epsilon;	/* default error for real functions */
 	    long epsilonprec;	/* epsilon binary precision (tied to epsilon) */
@@ -194,8 +194,8 @@ typedef struct config CONFIG;
  * global configuration states and aliases
  */
 extern DLL CONFIG *conf;	/* current configuration */
-extern DLL CONFIG oldstd;	/* backward compatible standard configuration */
-extern DLL CONFIG newstd;	/* new non-backward compatible configuration */
+extern DLL CONFIG oldstd;	/* old classic standard configuration */
+extern DLL CONFIG newstd;	/* default compatible configuration */
 extern DLL char *calc_debug;	/* !=NULL => value of config("calc_debug") */
 extern DLL char *resource_debug; /* !=NULL => config("resource_debug") value */
 extern DLL char *user_debug;	/* !=NULL => value of config("user_debug") */

cscript/Makefile

@@ -17,8 +17,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.20 $
-# @(#) $Id: Makefile,v 29.20 2001/06/10 19:35:02 chongo Exp $
+# @(#) $Revision: 29.23 $
+# @(#) $Id: Makefile,v 29.23 2003/01/14 01:58:18 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/Makefile,v $
 #
 # Under source code control:	1999/11/29 11:10:26
@@ -36,21 +36,111 @@
 SHELL= /bin/sh
 MAKE_FILE = Makefile
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
+####
+
+# Where the system include (.h) files are kept
+#
+# For DJGPP, select:
+#
+#	INCDIR= /dev/env/DJDIR/include
+#
+# If in doubt, set:
+#
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
 #
 #BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
 BINDIR= /usr/bin
-#BINDIR= /usr/contrib/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
 #
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
 SCRIPTDIR= ${BINDIR}/cscript
 
 # T - top level directory under which calc will be installed
 #
 # The calc install is performed under $T, the calc build is
-# performed under /.  The purpose for $T is to allow someone to
-# install calc somewhere other than into the system area.  For example
-# when forming the calc rpm, the Makefile is called with T=$RPM_BUILD_ROOT.
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
 #
 # If $T is empty, calc is installed under /, which is the same
 # top of tree for which it was built.  If $T is non-empty, then
@@ -139,8 +229,10 @@ all: ${TARGETS} .all
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q}for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo cscript/$$i; \
+	    fi; \
 	done | LANG=C ${SORT}
 
 distdir:
@@ -152,23 +244,27 @@ calcliblist:
 #
 detaillist:
 	${Q}-(echo "xxxxxxx"; \
-	   for i in ${SCRIPT}; do \
+	   for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		if [ ! -f RCS/$$i.calc,v ]; then \
 		    echo "WARNING: $$i.calc not under RCS control" 1>&2; \
 		else \
 		    echo $$i; \
 		fi; \
+	    fi; \
 	done | LANG=C ${SORT}) | ${FMT} -70 | \
 	    ${SED} -e '1s/xxxxxxx/SCRIPT=/' -e '2,$$s/^/	/' \
 		   -e 's/$$/ \\/' -e '$$s/ \\$$//'
 	${Q}echo
 	${Q}-(echo "xxxxxxxxxxx"; \
-	   for i in ${SCRIPT}; do \
+	   for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		if [ ! -f RCS/$$i.calc,v ]; then \
 		    echo "WARNING: $$i.calc not under RCS control" 1>&2; \
 		else \
 		    echo $$i.calc; \
 		fi; \
+	    fi; \
 	done | LANG=C ${SORT}) | ${FMT} -70 | \
 	    ${SED} -e '1s/xxxxxxxxxxx/SCRIPT_SRC=/' -e '2,$$s/^/	/' \
 		   -e 's/$$/ \\/' -e '$$s/ \\$$//'
@@ -197,11 +293,13 @@ depend:
 	${Q}echo "# DO NOT DELETE THIS LINE -- make depend depends on it." > \
 		makedep.out
 	${Q}echo "" >> makedep.out
-	${Q}for i in ${SCRIPT}; do \
+	${Q}for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo "$$i: $$i.calc"; \
-		echo '	rm -f $$@'; \
-		echo '	$${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!$${BINDIR}/calc:" $$?>$$@'; \
-		echo '	$${CHMOD} +x $$@'; \
+		echo '	@rm -f $$@'; \
+		echo '	@$${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!$${BINDIR}/calc:" $$?>$$@'; \
+		echo '	@$${CHMOD} +x $$@'; \
+	    fi; \
 	done >> makedep.out
 	${Q}echo sample dependency list formed
 	${Q}echo forming new cscript/Makefile
@@ -233,8 +331,10 @@ depend:
 ##
 
 echo_inst_files:
-	${Q}for i in ${SCRIPT}; do \
-	    echo __file__ ${SCRIPTDIR}/$$i; \
+	${Q}for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${SCRIPTDIR}/$$i; \
+	    fi; \
 	done
 
 ##
@@ -274,7 +374,10 @@ install: all
 	else \
 	    true; \
 	fi
-	${Q}for i in ${SCRIPT}; do \
+	${Q}for i in ${SCRIPT} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
 	    if ${CMP} -s $$i $T${SCRIPTDIR}/$$i; then \
 		true; \
 	    else \
@@ -289,34 +392,34 @@ install: all
 # DO NOT DELETE THIS LINE -- make depend depends on it.
 
 4dsphere: 4dsphere.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 fproduct: fproduct.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 mersenne: mersenne.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 piforever: piforever.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 plus: plus.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 powerterm: powerterm.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 simple: simple.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 square: square.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@

custom/Makefile

@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.17 $
-# @(#) $Id: Makefile,v 29.17 2001/06/08 22:38:53 chongo Exp $
+# @(#) $Revision: 29.20 $
+# @(#) $Id: Makefile,v 29.20 2003/01/14 02:18:45 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/Makefile,v $
 #
 # Under source code control:	1997/03/09 02:28:54
@@ -88,40 +88,111 @@ CUSTOM_OBJ= c_argv.o c_devnull.o c_help.o c_sysinfo.o c_pzasusb8.o
 #Q=
 Q=@
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
+####
+
+# Where the system include (.h) files are kept
 #
-# where to install things
+# For DJGPP, select:
 #
-# ${SHAREDIR}		where most common shared files are kept
-# ${INCDIR}		where most .h files are kept
+#	INCDIR= /dev/env/DJDIR/include
 #
-# ${CSHAREDIR}		where most common shared calc files are kept
-# ${HELPDIR}		where the help directory is installed.
-# ${INCDIRCALC}		where the calc include files are installed
-# ${CUSTOMLIBDIR}	where custom *.cal files & libcustcalc.a are installed.
-# ${CUSTOMHELPDIR}	where custom help files are installed.
-# ${CUSTOMINCPDIR}	where custom .h files are installed.
+# If in doubt, set:
 #
-#SHAREDIR= /usr/local/lib
-SHAREDIR= /usr/share
+#	INCDIR= /usr/include
 #
+
 #INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
 INCDIR= /usr/include
+
+# where to install calc realted things
 #
-CSHAREDIR= ${SHAREDIR}/calc
-HELPDIR= ${CSHAREDIR}/help
-INCDIRCALC= ${INCDIR}/calc
-CUSTOMLIBDIR= ${CSHAREDIR}/custom
-CUSTOMHELPDIR= ${CSHAREDIR}/custhelp
-CUSTOMINCDIR= ${INCDIRCALC}/custom
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
+SCRIPTDIR= ${BINDIR}/cscript
 
 # T - top level directory under which calc will be installed
 #
 # The calc install is performed under $T, the calc build is
-# performed under /.  The purpose for $T is to allow someone to
-# install calc somewhere other than into the system area.  For example
-# when forming the calc rpm, the Makefile is called with T=$RPM_BUILD_ROOT.
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
 #
 # If $T is empty, calc is installed under /, which is the same
 # top of tree for which it was built.  If $T is non-empty, then
@@ -279,7 +350,7 @@ REQUIRED_SRC= custtbl.c
 #
 REQUIRED_OBJ= custtbl.o
 
-# These .h files are installed under ${CUSTOMLIBDIR} by the install rule.
+# These .h files are installed under ${CUSTOMCALDIR} by the install rule.
 #
 INSTALL_H_SRC= ${CUSTOM_H_SRC}
 
@@ -381,8 +452,10 @@ c_sysinfo.o: c_sysinfo.c ${MAKE_FILE}
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q}for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo custom/$$i; \
+	    fi; \
 	done
 
 distdir:
@@ -418,11 +491,13 @@ depend:
 	-${Q}rm -rf skel
 	${Q}mkdir skel
 	${Q}mkdir skel/custom
-	-${Q}for i in ${C_SRC}; do \
+	-${Q}for i in ${C_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		${SED} -n '/^#[	 ]*include[	 ]*"/p' \
 		    "$$i" > "skel/custom/$$i"; \
+	    fi; \
 	done
-	-${Q}for i in /dev/null ${H_SRC}; do \
+	-${Q}for i in ${H_SRC} /dev/null; do \
 		if [ "$$i" = "/dev/null" ]; then \
 		    continue; \
 		fi; \
@@ -437,7 +512,10 @@ depend:
 	${Q}for i in `cd ..; ${MAKE} h_list 2>&1 | \
 			     ${SED} -e '/Entering directory/d' \
 				    -e '/Nothing to be done/d' \
-				    -e '/Leaving directory/d'`; do \
+				    -e '/Leaving directory/d'` /dev/null; do \
+		if [ "$$i" = "/dev/null" ]; then \
+		    continue; \
+		fi; \
 		tag="`echo $$i | ${SED} 's/[\.+,:]/_/g'`"; \
 		echo "#if !defined($$tag)" > "skel/$$i"; \
 		echo "#define $$tag" >> "skel/$$i"; \
@@ -451,8 +529,10 @@ depend:
 	${Q}echo "# DO NOT DELETE THIS LINE -- make depend depends on it." > \
 	    skel/custom/makedep.out
 	${Q}cd skel/custom; ${MAKEDEPEND} -w 1 -f makedep.out ${C_SRC}
-	-${Q}for i in ${C_SRC}; do \
+	-${Q}for i in ${C_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo "$$i" | ${SED} 's/^\(.*\)\.c/\1.o: \1.c/'; \
+	    fi; \
 	done >> skel/custom/makedep.out
 	${Q}echo custom dependency list formed
 	${Q}echo forming new custom/Makefile
@@ -485,17 +565,25 @@ depend:
 ##
 
 echo_inst_files:
-	${Q}for i in ${INSTALL_H_SRC}; do \
-	    echo __file__ ${CUSTOMINCDIR}/$$i; \
+	${Q}for i in ${INSTALL_H_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CUSTOMINCDIR}/$$i; \
+	    fi; \
 	done
-	${Q}for i in ${CUSTOM_HELP}; do \
-	    echo __file__ ${CUSTOMHELPDIR}/$$i; \
+	${Q}for i in ${CUSTOM_HELP} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CUSTOMHELPDIR}/$$i; \
+	    fi; \
 	done
-	${Q}for i in ${CUSTOM_CALC_FILES}; do \
-	    echo __file__ ${CUSTOMLIBDIR}/$$i; \
+	${Q}for i in ${CUSTOM_CALC_FILES} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CUSTOMCALDIR}/$$i; \
+	    fi; \
 	done
-	${Q}for i in ${CALC_LIBCUSTOM}; do \
-	    echo __file__ ${CUSTOMLIBDIR}/$$i; \
+	${Q}for i in ${CALC_LIBCUSTOM} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CUSTOMCALDIR}/$$i; \
+	    fi; \
 	done
 
 ##
@@ -512,18 +600,6 @@ clobber:
 	rm -f .all Makefile.tmp Makefile.bak
 
 install: all
-	-${Q}if [ ! -d $T${SHAREDIR} ]; then \
-	    echo mkdir $T${SHAREDIR}; \
-	    mkdir $T${SHAREDIR}; \
-	    if [ ! -d "$T${SHAREDIR}" ]; then \
-		echo mkdir -p "$T${SHAREDIR}"; \
-		mkdir -p "$T${SHAREDIR}"; \
-	    fi; \
-	    echo ${CHMOD} 0755 $T${SHAREDIR}; \
-	    ${CHMOD} 0755 $T${SHAREDIR}; \
-	else \
-	    true; \
-	fi
 	-${Q}if [ ! -d $T${INCDIR} ]; then \
 	    echo mkdir $T${INCDIR}; \
 	    mkdir $T${INCDIR}; \
@@ -536,27 +612,27 @@ install: all
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d $T${CSHAREDIR} ]; then \
-	    echo mkdir $T${CSHAREDIR}; \
-	    mkdir $T${CSHAREDIR}; \
-	    if [ ! -d "$T${CSHAREDIR}" ]; then \
-		echo mkdir -p "$T${CSHAREDIR}"; \
-		mkdir -p "$T${CSHAREDIR}"; \
+	-${Q}if [ ! -d $T${CALC_SHAREDIR} ]; then \
+	    echo mkdir $T${CALC_SHAREDIR}; \
+	    mkdir $T${CALC_SHAREDIR}; \
+	    if [ ! -d "$T${CALC_SHAREDIR}" ]; then \
+		echo mkdir -p "$T${CALC_SHAREDIR}"; \
+		mkdir -p "$T${CALC_SHAREDIR}"; \
 	    fi; \
-	    echo ${CHMOD} 0755 $T${CSHAREDIR}; \
-	    ${CHMOD} 0755 $T${CSHAREDIR}; \
+	    echo ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
+	    ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d $T${INCDIRCALC} ]; then \
-	    echo mkdir $T${INCDIRCALC}; \
-	    mkdir $T${INCDIRCALC}; \
-	    if [ ! -d "$T${INCDIRCALC}" ]; then \
-		echo mkdir -p "$T${INCDIRCALC}"; \
-		mkdir -p "$T${INCDIRCALC}"; \
+	-${Q}if [ ! -d $T${CALC_INCDIR} ]; then \
+	    echo mkdir $T${CALC_INCDIR}; \
+	    mkdir $T${CALC_INCDIR}; \
+	    if [ ! -d "$T${CALC_INCDIR}" ]; then \
+		echo mkdir -p "$T${CALC_INCDIR}"; \
+		mkdir -p "$T${CALC_INCDIR}"; \
 	    fi; \
-	    echo ${CHMOD} 0755 $T${INCDIRCALC}; \
-	    ${CHMOD} 0755 $T${INCDIRCALC}; \
+	    echo ${CHMOD} 0755 $T${CALC_INCDIR}; \
+	    ${CHMOD} 0755 $T${CALC_INCDIR}; \
 	else \
 	    true; \
 	fi
@@ -572,15 +648,15 @@ install: all
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d $T${CUSTOMLIBDIR} ]; then \
-	    echo mkdir $T${CUSTOMLIBDIR}; \
-	    mkdir $T${CUSTOMLIBDIR}; \
-	    if [ ! -d "$T${CUSTOMLIBDIR}" ]; then \
-		echo mkdir -p "$T${CUSTOMLIBDIR}"; \
-		mkdir -p "$T${CUSTOMLIBDIR}"; \
+	-${Q}if [ ! -d $T${CUSTOMCALDIR} ]; then \
+	    echo mkdir $T${CUSTOMCALDIR}; \
+	    mkdir $T${CUSTOMCALDIR}; \
+	    if [ ! -d "$T${CUSTOMCALDIR}" ]; then \
+		echo mkdir -p "$T${CUSTOMCALDIR}"; \
+		mkdir -p "$T${CUSTOMCALDIR}"; \
 	    fi; \
-	    echo ${CHMOD} 0755 $T${CUSTOMLIBDIR}; \
-	    ${CHMOD} 0755 $T${CUSTOMLIBDIR}; \
+	    echo ${CHMOD} 0755 $T${CUSTOMCALDIR}; \
+	    ${CHMOD} 0755 $T${CUSTOMCALDIR}; \
 	else \
 	    true; \
 	fi
@@ -608,7 +684,10 @@ install: all
 	else \
 	    true; \
 	fi
-	-${Q}for i in ${INSTALL_H_SRC}; do \
+	-${Q}for i in ${INSTALL_H_SRC} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
 	    if ${CMP} -s tmp $T${CUSTOMINCDIR}/$$i; then \
 		true; \
 	    else \
@@ -620,18 +699,24 @@ install: all
 	    fi; \
 	done
 	-${Q}rm -f tmp
-	-${Q}for i in ${CUSTOM_CALC_FILES}; do \
-	    if ${CMP} -s $$i $T${CUSTOMLIBDIR}/$$i; then \
+	-${Q}for i in ${CUSTOM_CALC_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s $$i $T${CUSTOMCALDIR}/$$i; then \
 		true; \
 	    else \
-		rm -f $T${CUSTOMLIBDIR}/$$i.new; \
-		cp -f $$i $T${CUSTOMLIBDIR}/$$i.new; \
-		${CHMOD} 0444 $T${CUSTOMLIBDIR}/$$i.new; \
-		mv -f $T${CUSTOMLIBDIR}/$$i.new $T${CUSTOMLIBDIR}/$$i; \
-		echo "installed $T${CUSTOMLIBDIR}/$$i"; \
+		rm -f $T${CUSTOMCALDIR}/$$i.new; \
+		cp -f $$i $T${CUSTOMCALDIR}/$$i.new; \
+		${CHMOD} 0444 $T${CUSTOMCALDIR}/$$i.new; \
+		mv -f $T${CUSTOMCALDIR}/$$i.new $T${CUSTOMCALDIR}/$$i; \
+		echo "installed $T${CUSTOMCALDIR}/$$i"; \
 	    fi; \
 	done
-	-${Q}for i in ${CUSTOM_HELP}; do \
+	-${Q}for i in ${CUSTOM_HELP} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
 	    if ${CMP} -s $$i $T${CUSTOMHELPDIR}/$$i; then \
 		true; \
 	    else \
@@ -643,16 +728,16 @@ install: all
 	    fi; \
 	done
 	-${Q}if [ ! -z ${ALLOW_CUSTOM} ]; then \
-	    if ${CMP} -s libcustcalc.a $T${CUSTOMLIBDIR}/libcustcalc.a; then \
+	    if ${CMP} -s libcustcalc.a $T${CUSTOMCALDIR}/libcustcalc.a; then \
 		true; \
 	    else \
-		rm -f $T${CUSTOMLIBDIR}/libcustcalc.a.new; \
-		cp -f libcustcalc.a $T${CUSTOMLIBDIR}/libcustcalc.a.new; \
-		${CHMOD} 0644 $T${CUSTOMLIBDIR}/libcustcalc.a.new; \
-		mv -f $T${CUSTOMLIBDIR}/libcustcalc.a.new \
-		      $T${CUSTOMLIBDIR}/libcustcalc.a; \
-		${RANLIB} $T${CUSTOMLIBDIR}/libcustcalc.a; \
-		echo "installed $T${CUSTOMLIBDIR}/libcustcalc.a"; \
+		rm -f $T${CUSTOMCALDIR}/libcustcalc.a.new; \
+		cp -f libcustcalc.a $T${CUSTOMCALDIR}/libcustcalc.a.new; \
+		${CHMOD} 0644 $T${CUSTOMCALDIR}/libcustcalc.a.new; \
+		mv -f $T${CUSTOMCALDIR}/libcustcalc.a.new \
+		      $T${CUSTOMCALDIR}/libcustcalc.a; \
+		${RANLIB} $T${CUSTOMCALDIR}/libcustcalc.a; \
+		echo "installed $T${CUSTOMCALDIR}/libcustcalc.a"; \
 	    fi; \
 	fi
 
@@ -664,7 +749,6 @@ install: all
 
 # DO NOT DELETE THIS LINE
 
-
 c_argv.o: ../alloc.h
 c_argv.o: ../block.h
 c_argv.o: ../byteswap.h

custom/c_sysinfo.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.5 $
- * @(#) $Id: c_sysinfo.c,v 29.5 2001/04/14 23:04:17 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: c_sysinfo.c,v 29.6 2003/06/10 21:44:17 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/custom/RCS/c_sysinfo.c,v $
  *
  * Under source code control:	1997/03/09 23:14:40
@@ -128,8 +128,6 @@ static struct infoname sys_info[] = {
     {"MAX_SM_PRIME", "larest 32 bit prime", NULL, (FULL)MAX_SM_PRIME},
     {"MAX_SM_VAL", "larest 32 bit value", NULL, (FULL)MAX_SM_VAL},
     {"MUL_ALG2", "default size for alternative multiply", NULL, (FULL)MUL_ALG2},
-    {"NEW_EPSILONPREC_DEFAULT", "2^-EPSILON_DEFAULT <= EPSILON_DEFAULT", NULL, (FULL)NEW_EPSILONPREC_DEFAULT},
-    {"NEW_EPSILON_DEFAULT", "newstd EPSILON_DEFAULT", NEW_EPSILON_DEFAULT, (FULL)0},
     {"NXT_MAP_PRIME", "smallest odd prime not in pr_map", NULL, (FULL)NXT_MAP_PRIME},
     {"NXT_PFACT_VAL", "next prime for higher pfact values", NULL, (FULL)NXT_PFACT_VAL},
     {"OFF_T_BITS", "file offset size in bits", NULL, (FULL)OFF_T_BITS},

endian.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: endian.c,v 29.3 2001/03/18 02:59:42 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: endian.c,v 29.4 2003/01/14 01:50:01 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/endian.c,v $
  *
  * Under source code control:	1993/11/15 04:32:58
@@ -36,6 +36,11 @@
 
 #include <stdio.h>
 
+#include "have_stdlib.h"
+#if defined(HAVE_STDLIB_H)
+#include <stdlib.h>
+#endif
+
 #include "have_unistd.h"
 #if defined(HAVE_UNISTD_H)
 #include <unistd.h>

func.c

@@ -1,7 +1,7 @@
 /*
  * func - built-in functions implemented here
  *
- * Copyright (C) 1999  David I. Bell, Landon Curt Noll and Ernest Bowen
+ * Copyright (C) 1999-2002  David I. Bell, Landon Curt Noll and Ernest Bowen
  *
  * Primary author:  David I. Bell
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.10 $
- * @(#) $Id: func.c,v 29.10 2001/05/29 00:41:22 chongo Exp $
+ * @(#) $Revision: 29.12 $
+ * @(#) $Id: func.c,v 29.12 2002/12/29 09:20:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/func.c,v $
  *
  * Under source code control:	1990/02/15 01:48:15
@@ -107,7 +107,7 @@
 /*
  * forward declarations
  */
-static NUMBER *base_value(long mode);
+static NUMBER *base_value(long mode, int defval);
 static int strscan(char *s, int count, VALUE **vals);
 static int filescan(FILEID id, int count, VALUE **vals);
 static VALUE f_eval(VALUE *vp);
@@ -6910,9 +6910,9 @@ f_system(VALUE *vp)
 		printf("%s\n", vp->v_str->s_str);
 	}
 #if defined(_WIN32)
-	/* if the execute length is 0 then use NULL in system call */
+	/* if the execute length is 0 then just return 0 */
 	if (strlen(vp->v_str->s_str) == 0) {
-		result.v_num = itoq((long)system(NULL));
+		result.v_num = itoq((long)0);
 	} else {
 		result.v_num = itoq((long)system(vp->v_str->s_str));
 	}
@@ -6978,15 +6978,15 @@ f_base(int count, NUMBER **vals)
 
 	/* deal with just a query */
 	if (count != 1) {
-		return base_value(conf->outmode);
+		return base_value(conf->outmode, conf->outmode);
 	}
 
 	/* deal with the specal modes first */
 	if (qisfrac(vals[0])) {
-		return base_value(math_setmode(MODE_FRAC));
+		return base_value(math_setmode(MODE_FRAC), conf->outmode);
 	}
 	if (vals[0]->num.len > 64/BASEB) {
-		return base_value(math_setmode(MODE_EXP));
+		return base_value(math_setmode(MODE_EXP), conf->outmode);
 	}
 
 	/* set the base, if possible */
@@ -7014,7 +7014,61 @@ f_base(int count, NUMBER **vals)
 	}
 
 	/* return the old base */
-	return base_value(oldbase);
+	return base_value(oldbase, conf->outmode);
+}
+
+
+/*
+ * set the default secondary output base/mode
+ */
+static NUMBER *
+f_base2(int count, NUMBER **vals)
+{
+	long base;	/* output base/mode */
+	long oldbase=0; /* output base/mode */
+
+	/* deal with just a query */
+	if (count != 1) {
+		return base_value(conf->outmode2, conf->outmode2);
+	}
+
+	/* deal with the specal modes first */
+	if (qisfrac(vals[0])) {
+		return base_value(math_setmode2(MODE_FRAC), conf->outmode2);
+	}
+	if (vals[0]->num.len > 64/BASEB) {
+		return base_value(math_setmode2(MODE_EXP), conf->outmode2);
+	}
+
+	/* set the base, if possible */
+	base = qtoi(vals[0]);
+	switch (base) {
+	case 0:
+		oldbase = math_setmode2(MODE2_OFF);
+		break;
+	case -10:
+		oldbase = math_setmode2(MODE_INT);
+		break;
+	case 2:
+		oldbase = math_setmode2(MODE_BINARY);
+		break;
+	case 8:
+		oldbase = math_setmode2(MODE_OCTAL);
+		break;
+	case 10:
+		oldbase = math_setmode2(MODE_REAL);
+		break;
+	case 16:
+		oldbase = math_setmode2(MODE_HEX);
+		break;
+	default:
+		math_error("Unsupported base");
+		/*NOTREACHED*/
+		break;
+	}
+
+	/* return the old base */
+	return base_value(oldbase, conf->outmode2);
 }
 
 
@@ -7022,14 +7076,14 @@ f_base(int count, NUMBER **vals)
  * return a numerical 'value' of the mode/base
  */
 static NUMBER *
-base_value(long mode)
+base_value(long mode, int defval)
 {
 	NUMBER *result;
 
 	/* return the old base */
 	switch (mode) {
 	case MODE_DEFAULT:
-		switch (conf->outmode) {
+		switch (defval) {
 		case MODE_DEFAULT:
 			result = itoq(10);
 			break;
@@ -7056,6 +7110,9 @@ base_value(long mode)
 		case MODE_BINARY:
 			result = itoq(2);
 			break;
+		case MODE2_OFF:
+			result = itoq(0);
+			break;
 		default:
 			result = itoq(0);
 			break;
@@ -7084,6 +7141,9 @@ base_value(long mode)
 	case MODE_BINARY:
 		result = itoq(2);
 		break;
+	case MODE2_OFF:
+		result = itoq(0);
+		break;
 	default:
 		result = itoq(0);
 		break;
@@ -7825,6 +7885,8 @@ static CONST struct builtin builtins[] = {
 	 "arithmetic mean of values"},
 	{"base", 0, 1, 0, OP_NOP, f_base, 0,
 	 "set default output base"},
+	{"base2", 0, 1, 0, OP_NOP, f_base2, 0,
+	 "set default secondary output base"},
 	{"bernoulli", 1, 1, 0, OP_NOP, 0, f_bern,
 	 "Bernoulli number for index a"},
 	{"bit", 2, 2, 0, OP_BIT, 0, 0,

hash.c

@@ -1,7 +1,7 @@
 /*
  * hash - one-way hash routines
  *
- * Copyright (C) 1999  Landon Curt Noll
+ * Copyright (C) 1999-2002  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.4 $
- * @(#) $Id: hash.c,v 29.4 2001/04/14 22:47:21 chongo Exp $
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: hash.c,v 29.5 2002/12/29 09:20:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/hash.c,v $
  *
  * Under source code control:	1995/11/23 05:13:11
@@ -941,6 +941,7 @@ hash_value(int type, void *v, HASH *state)
 
 		/* hash the CONFIG state */
 		state = hash_int(type, value->v_config->outmode, state);
+		state = hash_int(type, value->v_config->outmode2, state);
 		state = hash_long(type,(long)value->v_config->outdigits, state);
 		state = hash_number(type, value->v_config->epsilon, state);
 		state = hash_long(type,

help/Makefile

@@ -2,7 +2,7 @@
 #
 # help - makefile for calc help files
 #
-# Copyright (C) 1999  Landon Curt Noll
+# Copyright (C) 1999-2002  Landon Curt Noll
 #
 # Calc is open software; you can redistribute it and/or modify it under
 # the terms of the version 2.1 of the GNU Lesser General Public License
@@ -18,8 +18,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.18 $
-# @(#) $Id: Makefile,v 29.18 2001/06/08 22:57:54 chongo Exp $
+# @(#) $Revision: 29.23 $
+# @(#) $Id: Makefile,v 29.23 2003/01/14 02:24:48 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/help/RCS/Makefile,v $
 #
 # Under source code control:	1991/07/23 06:47:57
@@ -36,33 +36,111 @@
 SHELL= /bin/sh
 MAKE_FILE = Makefile
 
-# ${SHAREDIR}		where most common shared files are kept
-# ${INCDIR}		where most .h files are kept
-# ${LIBDIR}		where *.a files are installed
+####
+# Normally, the upper level makefile will set these values.  We provide
+# a default here just in case you want to build from this directory.
+####
+
+# Where the system include (.h) files are kept
 #
-# ${CSHAREDIR}		where most common shared calc files are kept
-# ${HELPDIR}		where the help directory is installed.
-# ${INCDIRCALC}		where the calc include files are installed
+# For DJGPP, select:
+#
+#	INCDIR= /dev/env/DJDIR/include
+#
+# If in doubt, set:
+#
+#	INCDIR= /usr/include
 #
-#SHAREDIR= /usr/local/lib
-SHAREDIR= /usr/share
 
 #INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
 INCDIR= /usr/include
 
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
 #LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
 LIBDIR= /usr/lib
 
-CSHAREDIR= ${SHAREDIR}/calc
-HELPDIR= ${CSHAREDIR}/help
-INCDIRCALC= ${INCDIR}/calc
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
+SCRIPTDIR= ${BINDIR}/cscript
 
 # T - top level directory under which calc will be installed
 #
 # The calc install is performed under $T, the calc build is
-# performed under /.  The purpose for $T is to allow someone to
-# install calc somewhere other than into the system area.  For example
-# when forming the calc rpm, the Makefile is called with T=$RPM_BUILD_ROOT.
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
 #
 # If $T is empty, calc is installed under /, which is the same
 # top of tree for which it was built.  If $T is non-empty, then
@@ -168,11 +246,11 @@ BLT_HELP_FILES= ${BLT_HELP_FILES_3} ${BLT_HELP_FILES_5} \
 # This list is prodiced by the detaillist rule when no WARNINGS are detected.
 #
 DETAIL_HELP= abs access acos acosh acot acoth acsc acsch address agd append \
-	appr arg argv arrow asec asech asin asinh assign atan atan2 atanh avg \
-	base bernoulli bit blk blkcpy blkfree blocks bround btrunc calc_tty \
-	calclevel catalan ceil cfappr cfsim char cmdbuf cmp comb conj cos \
-	cosh cot coth count cp csc csch ctime delete den dereference det \
-	digit digits dp epsilon errcount errmax errno error euler eval \
+	appr arg argv arrow asec asech asin asinh assign atan atan2 atanh \
+	avg base base2 bernoulli bit blk blkcpy blkfree blocks bround btrunc \
+	calc_tty calclevel catalan ceil cfappr cfsim char cmdbuf cmp comb \
+	conj cos cosh cot coth count cp csc csch ctime delete den dereference \
+	det digit digits dp epsilon errcount errmax errno error euler eval \
 	exp fact factor fclose fcnt feof ferror fflush fgetc fgetfield \
 	fgetline fgets fgetstr fib files floor fopen forall fprintf fputc \
 	fputs fputstr frac free freebernoulli freeeuler freeglobals freeredc \
@@ -267,7 +345,7 @@ changes: ../CHANGES
 libcalc: ../LIBRARY
 	rm -f $@
 	${SED} -e 's:$${LIBDIR}:${LIBDIR}:g' \
-	       -e 's:$${INCDIRCALC}:${INCDIRCALC}:g' < ../LIBRARY > $@
+	       -e 's:$${CALC_INCDIR}:${CALC_INCDIR}:g' < ../LIBRARY > $@
 	${CHMOD} 0444 $@
 	-@if [ -z "${Q}" ]; then \
 	    echo ''; \
@@ -418,11 +496,13 @@ full: ${FULL_HELP_FILES} ${MAKE_FILE}
 # Singular files are the same files as their plural form.
 #
 ${SINGULAR_FILES}: ${PLURAL_FILES}
-	${Q}for i in ${SINGULAR_FILES}; do \
-	    echo "rm -f $${i}"; \
-	    rm -f $${i}; \
-	    echo "cp $${i}s $${i}"; \
-	    cp $${i}s $${i}; \
+	${Q}for i in ${SINGULAR_FILES} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo "rm -f $${i}"; \
+		rm -f $${i}; \
+		echo "cp $${i}s $${i}"; \
+		cp $${i}s $${i}; \
+	    fi; \
 	done
 	-@if [ -z "${Q}" ]; then \
 	    echo ''; \
@@ -455,7 +535,8 @@ builtin: builtin.top builtin.end ../func.c funclist.sed
 	-${Q}rm -f funclist.c
 	${Q}${SED} -n -f funclist.sed ../func.c > funclist.c
 	-${Q}rm -f funclist.o funclist
-	${Q}${LCC} ${ICFLAGS} -DFUNCLIST -I/usr/include -I.. funclist.c -c
+	${Q}${LCC} ${ICFLAGS} -DFUNCLIST -I/usr/include \
+	    -I.. funclist.c -c 2>/dev/null
 	${Q}${LCC} ${ILDFLAGS} funclist.o -o funclist
 	-${Q}rm -f builtin
 	${Q}cat builtin.top > builtin
@@ -482,8 +563,10 @@ builtin: builtin.top builtin.end ../func.c funclist.sed
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q}for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo help/$$i; \
+	    fi; \
 	done | LANG=C ${SORT}
 
 distdir:
@@ -508,12 +591,14 @@ bsdi: all
 #
 detaillist:
 	${Q}-(echo "xxxxx"; \
-	   for i in ${DETAIL_HELP}; do \
+	   for i in ${DETAIL_HELP} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		if [ ! -f RCS/$$i,v ]; then \
 		    echo "WARNING: $$i not under RCS control" 1>&2; \
 		else \
 		    echo $$i; \
 		fi; \
+	    fi; \
 	done | LANG=C ${SORT}) | ${FMT} -70 | \
 	    ${SED} -e '1s/xxxxx/DETAIL_HELP=/' -e '2,$$s/^/	/' \
 		   -e 's/$$/ \\/' -e '$$s/ \\$$//'
@@ -526,8 +611,10 @@ detaillist:
 
 echo_inst_files:
 	${Q}for i in ${STD_HELP_FILES} full ${BLT_HELP_FILES} \
-		  builtin ${DETAIL_HELP} ${SINGULAR_FILES}; do \
-	    echo __file__ ${HELPDIR}/$$i; \
+		  builtin ${DETAIL_HELP} ${SINGULAR_FILES} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${HELPDIR}/$$i; \
+	    fi; \
 	done
 	${Q}echo __file__ ${HELPDIR}/obj
 
@@ -548,27 +635,15 @@ clobber:
 	rm -f ${SINGULAR_FILES} ${DETAIL_CLONE}
 
 install: all
-	-${Q}if [ ! -d ${SHAREDIR} ]; then \
-	    echo mkdir $T${SHAREDIR}; \
-	    mkdir $T${SHAREDIR}; \
-	    if [ ! -d "$T${SHAREDIR}" ]; then \
-		echo mkdir -p "$T${SHAREDIR}"; \
-		mkdir -p "$T${SHAREDIR}"; \
+	-${Q}if [ ! -d $T${CALC_SHAREDIR} ]; then \
+	    echo mkdir $T${CALC_SHAREDIR}; \
+	    mkdir $T${CALC_SHAREDIR}; \
+	    if [ ! -d "$T${CALC_SHAREDIR}" ]; then \
+		echo mkdir -p "$T${CALC_SHAREDIR}"; \
+		mkdir -p "$T${CALC_SHAREDIR}"; \
 	    fi; \
-	    echo ${CHMOD} 0755 $T${SHAREDIR}; \
-	    ${CHMOD} 0755 $T${SHAREDIR}; \
-	else \
-	    true; \
-	fi
-	-${Q}if [ ! -d $T${CSHAREDIR} ]; then \
-	    echo mkdir $T${CSHAREDIR}; \
-	    mkdir $T${CSHAREDIR}; \
-	    if [ ! -d "$T${CSHAREDIR}" ]; then \
-		echo mkdir -p "$T${CSHAREDIR}"; \
-		mkdir -p "$T${CSHAREDIR}"; \
-	    fi; \
-	    echo ${CHMOD} 0755 $T${CSHAREDIR}; \
-	    ${CHMOD} 0755 $T${CSHAREDIR}; \
+	    echo ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
+	    ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
 	else \
 	    true; \
 	fi
@@ -585,7 +660,10 @@ install: all
 	    true; \
 	fi
 	-${Q}for i in ${STD_HELP_FILES} ${BLT_HELP_FILES} builtin \
-		  full ${DETAIL_HELP} ${SINGULAR_FILES}; do \
+		  full ${DETAIL_HELP} ${SINGULAR_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
 	    if ${CMP} -s $$i $T${HELPDIR}/$$i; then \
 		true; \
 	    else \

help/address

@@ -23,7 +23,7 @@ DESCRIPTION
     0 <= i < sizeof(B).	 &B[i] then returns the address at which this
     octet is located until the block is freed or relocated.  Freeing
     of an unnamed block B occurs when a new value is assigned to B or
-    when B ceases to exist; a named block B is freed by blkfree(B().
+    when B ceases to exist; a named block B is freed by blkfree(B).
     A block is relocated when an operation like copying to B requires
     a change of sizeof(B).
 
@@ -70,18 +70,18 @@ DESCRIPTION
 			> p = &"abc"
 			> A = "abc"
 
-    The address &*A of the value of A will be equal to p.
+    the address &*A of the value of A will be equal to p.
 
     Except in cases like strcat(A, "") when *A identified with a literal
     string as above, definitions of string values using strcat() or substr()
     will copy the relevant strings to newly allocated addresses which will
     be useable only while the variables retain these defined values.
-    For example,
+    For example, after
 
 			> B = C = strcat("a", "bc");
 
     &*B and &*C will be different.  If p is defined by p = &*B, p should
-    not be used after a mew value is assigned to B, or B ceases to exist,
+    not be used after a new value is assigned to B, or B ceases to exist,
     etc.
 
     When compilation of a function encounters for the first time a particular
@@ -117,7 +117,7 @@ DESCRIPTION
 
 		> A = B = C = f(2);
 
-    which, not only performs the addition n f() only once, but stores the
+    which, not only performs the addition in f() only once, but stores the
     number values for A, B and C at the same address.
 
     Whether a value V is a pointer and if so, its type, is indicated by the
@@ -176,8 +176,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: address,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: address,v 29.3 2002/07/10 11:47:04 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/address,v $
 ##
 ## Under source code control:	1997/09/06 20:03:34

help/arrow

@@ -13,7 +13,7 @@ TYPES
 DESCRIPTION
     p->X returns the same as (*p).X.  Thus the current value of *p is
     to be an object of a type for which X identifies one element.
-    p->X then returns the lvalue corresponding to that element of of the
+    p->X then returns the lvalue corresponding to that element of the
     value of *p.
 
     The expression *p.X will cause a runtime error since this is
@@ -66,8 +66,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: arrow,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: arrow,v 29.3 2002/07/10 11:47:04 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/arrow,v $
 ##
 ## Under source code control:	1997/09/06 20:03:34

help/asin

@@ -14,7 +14,7 @@ DESCRIPTION
     Returns the asin of x to a multiple of eps with error less in
     absolute value than .75 * eps.
 
-    v = asin(x) is the number in [-p1/2, pi/2] for which sin(v) = x.
+    v = asin(x) is the number in [-pi/2, pi/2] for which sin(v) = x.
 
 EXAMPLE
     > print asin(.5, 1e-5), asin(.5, 1e-10), asin(.5, 1e-15), asin(.5, 1e-20)
@@ -45,8 +45,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: asin,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: asin,v 29.3 2002/07/10 11:47:04 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/asin,v $
 ##
 ## Under source code control:	1994/03/19 01:40:24

help/assoc

@@ -32,10 +32,9 @@ DESCRIPTION
     may have different numbers (between 1 and 4 inclusive) of indices,
     and these indices need not be integers in specified ranges.
 
-    Assignments of a null value
-    to an element of an association does not delete the element, but
-    a later reference to that element will return the null value as if
-    the element is undefined.
+    Assignment of a null value to an element of an association does not
+    delete the element, but a later reference to that element will return
+    the null value as if the element is undefined.
 
     The elements of an association are stored in a hash table for
     quick access.  The index values are hashed to select the correct
@@ -99,8 +98,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: assoc,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: assoc,v 29.3 2002/07/10 11:47:04 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/assoc,v $
 ##
 ## Under source code control:	1994/09/25 20:22:31

help/atan

@@ -14,7 +14,7 @@ DESCRIPTION
     Returns the atan of x to a multiple of eps with error less in
     absolute value than .75 * eps.
 
-    v = atan(x) is the number in (-p1/2, pi/2) for which tan(v) = x.
+    v = atan(x) is the number in (-pi/2, pi/2) for which tan(v) = x.
 
 EXAMPLE
     > print atan(2, 1e-5), atan(2, 1e-10), atan(2, 1e-15), atan(2, 1e-20)
@@ -45,8 +45,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: atan,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: atan,v 29.3 2002/07/10 11:47:04 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/atan,v $
 ##
 ## Under source code control:	1994/03/19 01:40:25

help/base

@@ -57,7 +57,7 @@ DESCRIPTION
 	base(1e20)	base(2^64)	base(2^8191-1)
 
     However the base() function will only return one of the base values
-    lised in the table above.
+    listed in the table above.
 
 EXAMPLE
     > base()
@@ -79,7 +79,7 @@ LINK LIBRARY
 	  MODE_REAL, MODE_EXP, MODE_HEX, MODE_OCTAL, MODE_BINARY
 
 SEE ALSO
-    config
+    base2, config, str
 
 ## Copyright (C) 1999  Landon Curt Noll
 ##
@@ -97,8 +97,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: base,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.5 $
+## @(#) $Id: base,v 29.5 2002/12/29 09:17:54 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/base,v $
 ##
 ## Under source code control:	1994/09/30 00:09:39

help/base2

@@ -0,0 +1,120 @@
+NAME
+    base2 - set 2nd output base
+
+SYNOPSIS
+    base2([mode])
+
+TYPES
+    mode	real
+
+    return	real
+
+DESCRIPTION
+    By default, calc will output values according to the default base
+    as controlled by the base() builtin function.
+
+    The base2() builtin function, if given a non-zero argument, enables
+    double base output mode.  In double base output mode, calc values
+    are displayed twice, once according to base() and again according
+    to base2().  In double base output mode, the second time a value is
+    displayed, it is displayed within comments:
+
+	21701 /* 0x54c5 */
+
+    The arguments for base2() are identical to base() with the addition
+    of the 0 value:
+
+	     base2	equivalent
+		      config("mode2")'s
+
+	       2	"binary"	base 2 fractions
+			"bin"
+
+	       8	"octal"		base 8 fractions
+			"oct"
+
+	      10	"real"		base 10 floating point
+			"float"
+			"default"
+
+	     -10	"integer"	base 10 integers
+			"int"
+
+	      16	"hexadecimal"	base 16 fractions
+			"hex"
+
+	     1/3	"fraction"	base 10 fractions
+			"frac"
+
+	    1e20	"scientific"	base 10 scientific notation
+			"sci"
+			"exp"
+
+	       0	"off"		disable double base output
+
+    For convenience, any non-integer non-zero value is assumed to mean
+    base 10 fractions and any integer >= 2^64 is assumed to mean base 10
+    scientific notation.
+
+    These base2() calls have the same meaning as config("mode2", "fraction"):
+
+	base2(1/3)	base2(0.1415)	base2(16/37)
+
+    These base2() calls have the same meaning as config("mode2", "scientific"):
+
+	base2(1e20)	base2(2^64)	base2(2^8191-1)
+
+    However the base2() function will only return one of the base values
+    listed in the table above.
+
+EXAMPLE
+    > base2()
+	    0
+    > base2(8)
+	    0 /* 0 */
+    > print 10
+    10 /* 012 */
+    > base2(16),
+    > 131072
+    	131072 /* 0x20000 */
+    > 2345
+	2345 /* 0x929 */
+
+LIMITS
+    none
+
+LINK LIBRARY
+    int math_setmode2(int newmode)
+
+    NOTE: newmode must be one of MODE_DEFAULT, MODE_FRAC, MODE_INT,
+	  MODE_REAL, MODE_EXP, MODE_HEX, MODE_OCTAL, MODE_BINARY,
+	  MODE2_OFF
+
+SEE ALSO
+    base, config, str
+
+## Copyright (C) 2002  Landon Curt Noll
+##
+## Calc is open software; you can redistribute it and/or modify it under
+## the terms of the version 2.1 of the GNU Lesser General Public License
+## as published by the Free Software Foundation.
+##
+## Calc is distributed in the hope that it will be useful, but WITHOUT
+## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+## or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+## Public License for more details.
+##
+## A copy of version 2.1 of the GNU Lesser General Public License is
+## distributed with calc under the filename COPYING-LGPL.  You should have
+## received a copy with calc; if not, write to Free Software Foundation, Inc.
+## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+##
+## @(#) $Revision: 1.3 $
+## @(#) $Id: base2,v 1.3 2002/12/29 09:17:54 chongo Exp $
+## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/base2,v $
+##
+## Under source code control:	2002/12/29 00:21:07
+## File existed as early as:	2002
+##
+## chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+## Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/

help/bernoulli

@@ -15,7 +15,7 @@ DESCRIPTION
 
 		t/(exp(t) - 1) = Sum B_n * t^n/n!
 
-    bernouuli(n) is zero both for n < 0 and for n odd and > 2.
+    bernoulli(n) is zero both for n < 0 and for n odd and > 2.
     When bernoulli(n) is computed for positive even n, the values for
     n and smaller positive even indices are stored in a table so that
     a later call to bernoulli(k) with 0 <= k < n will be executed quickly.
@@ -57,8 +57,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.4 $
-## @(#) $Id: bernoulli,v 29.4 2000/12/17 12:27:58 chongo Exp $
+## @(#) $Revision: 29.5 $
+## @(#) $Id: bernoulli,v 29.5 2002/07/10 11:47:04 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/bernoulli,v $
 ##
 ## Under source code control:	2000/07/13 01:33:00

help/blk

@@ -122,7 +122,7 @@ DESCRIPTION
     Named blocks are assigned index numbers 0, 1, 2, ..., in the order
     of their creation.	The block with index id is returned by blocks(id).
     With no argument, blocks() returns the number of current unfreed
-    named blocks.  A named block may be used
+    named blocks.
 
     The memory allocated to a named block is freed by the blkfree()
     function with argument the named block, its name, or its id number.
@@ -234,8 +234,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: blk,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: blk,v 29.3 2002/07/10 11:47:04 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/blk,v $
 ##
 ## Under source code control:	1997/04/05 13:07:13

help/blocks

@@ -1,5 +1,5 @@
 NAME
-    blocks - return a named file or number of unfreed named blocks
+    blocks - return a named block or number of unfreed named blocks
 
 SYNOPSIS
     blocks([id])
@@ -58,8 +58,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: blocks,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: blocks,v 29.3 2002/07/10 11:47:04 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/blocks,v $
 ##
 ## Under source code control:	1997/04/05 13:07:13

help/config

@@ -16,6 +16,7 @@ Configuration parameters
 	    "epsilon"		sets error value for transcendentals.
 	    "maxprint"		sets maximum number of elements printed.
 	    "mode"		sets printout mode.
+	    "mode2"		sets 2nd base printout mode.
 	    "mul2"		sets size for alternative multiply.
 	    "sq2"		sets size for alternative squaring.
 	    "pow2"		sets size for alternate powering.
@@ -184,6 +185,7 @@ Detailed config descriptions
     =-=
 
     config("mode", "mode_string")
+    config("mode2", "mode_string")
 
     The "mode" parameter is a string specifying the mode for printing of
     numbers by the unformatted print functions, and the default
@@ -219,7 +221,17 @@ Detailed config descriptions
     Where multiple strings are given, the first string listed is what
     config("mode") will return.
 
-    The default "mode" is "real".
+    The "mode2" controls the double base output.  When set to a value
+    other than "off", calc outputs files in both the "base" mode as
+    well as the "base2" mode.  The "mode2" value may be any of the
+    "mode" values with the addition of:
+
+	    "off"		disable 2nd base output mode	base2(0)
+
+    The base() builtin function sets and returns the "mode" value.
+    The base2() builtin function sets and returns the "mode2" value.
+
+    The default "mode" is "real".  The default "mode2" is "off".
 
     =-=
 
@@ -713,8 +725,8 @@ Detailed config descriptions
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.6 $
-## @(#) $Id: config,v 29.6 2001/04/25 07:17:38 chongo Exp $
+## @(#) $Revision: 29.7 $
+## @(#) $Id: config,v 29.7 2002/12/29 08:32:04 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/config,v $
 ##
 ## Under source code control:	1991/07/21 04:37:17

help/digits

@@ -11,20 +11,38 @@ TYPES
     return	integer
 
 DESCRIPTION
-    Returns the least non-negative integer n for which abs(x) < b^n.
+    Returns number of digits in the standard base-b representation
+    when x is truncated to an integer and the sign is ignored.
 
-    digits(x, b) = 0  if and only if abs(x) < 1.
+    To be more precise: when abs(int(x)) > 0, this function returns
+    the value 1 + ilog(x, b).  When abs(int(x)) == 0, then this
+    function returns the value 1.
 
-    For real x with absolute value >= 1, digits(x, b) is the number
-    of digits in the standard base-b "decimal" representation of int(abs(x));
-    this is also given by  1 + ilog(x, b).
+    If omitted, b is assumed to be 10.  If given, b must be an
+    integer > 1.
+
+    One should remember these special cases:
+
+	digits(12.3456) == 2    computes with the integer part only
+	digits(-1234) == 4      computes with the absolute value only
+	digits(0) == 1          specical case
+	digits(-0.123) == 1     combination of all of the above
 
 EXAMPLE
-    > print digits(0), digits(0.0123), digits(3.7), digits(-27), digits(-99.7)
-    0 0 1 2 2
+    > print digits(100), digits(23209), digits(2^72)
+    3 5 22
+
+    > print digits(0), digits(1), digits(-1)
+    1 1 1
+
+    > print digits(-1234), digits(12.3456), digits(107.207)
+    4 2 3
+
+    > print digits(17^463-1, 17), digits(10000, 100), digits(21701, 2)
+    3, 15 14
 
 LIMITS
-    none
+    b > 1
 
 LINK LIBRARY
     long qdigits(NUMBER *q, ZVALUE base)
@@ -32,7 +50,7 @@ LINK LIBRARY
 SEE ALSO
     digit, places
 
-## Copyright (C) 1999  Landon Curt Noll
+## Copyright (C) 1999-2003  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -48,8 +66,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.3 $
-## @(#) $Id: digits,v 29.3 2000/12/14 10:32:24 chongo Exp $
+## @(#) $Revision: 29.5 $
+## @(#) $Id: digits,v 29.5 2003/01/26 19:41:35 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/digits,v $
 ##
 ## Under source code control:	1995/10/03 10:40:01

help/hash

@@ -1,5 +1,5 @@
 NAME
-    hash - FNV-1 hash value
+    hash - return the calc hash value
 
 SYNOPSIS
     hash(x_1 [, x_2, x_3, ...])
@@ -12,27 +12,16 @@ TYPES
 DESCRIPTION
     Returns a hash value for one or more values of arbitrary types.
 
-    The basis of this hash algorithm was taken from an idea sent
-    as reviewer comments to the IEEE POSIX P1003.2 committee by:
+    The calc hash value is based on the core Fowler/Noll/Vo hash
+    known as FNV-1.  The return value, however, cannot be used
+    as an FNV hash value because calc's internal function also
+    takes into account more abstract concepts such as data types.
 
-	 Phong Vo (http://www.research.att.com/info/kpv/)
-	 Glenn Fowler (http://www.research.att.com/~gsf/)
-
-    In a subsequent ballot round:
-
-	 Landon Curt Noll (http://www.isthe.com/chongo/)
-
-    improved on their algorithm.  Some people tried this hash
-    and found that it worked rather well.  In an EMail message
-    to Landon, they named it ``Fowler/Noll/Vo'' or the FNV hash.
-
-    FNV hashes are architected to be fast while maintaining a low
-    collision rate. The FNV speed allows one to quickly hash lots
-    of data while maintaining a reasonable collision rate.  See:
+    See:
 
 	 http://www.isthe.com/chongo/tech/comp/fnv/
 
-    for more details as well as other forms of the FNV hash.
+    information about the Fowler/Noll/Vo (FNV) hash.
 
 EXAMPLE
     > a = isqrt(2e1000); s = "xyz";
@@ -48,7 +37,7 @@ LINK LIBRARY
 SEE ALSO
     sha, sha1, md5
 
-## Copyright (C) 1999  Landon Curt Noll
+## Copyright (C) 1999-2003  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -64,8 +53,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: hash,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: hash,v 29.3 2003/03/01 01:16:02 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/hash,v $
 ##
 ## Under source code control:	1996/03/12 23:10:01

help/im

@@ -20,7 +20,7 @@ LIMITS
     none
 
 LINK LIBRARY
-    COMPLEX *cimag(COMPLEX *x)
+    COMPLEX *c_imag(COMPLEX *x)
 
 SEE ALSO
     re
@@ -41,8 +41,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: im,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: im,v 29.3 2002/03/12 09:38:26 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/im,v $
 ##
 ## Under source code control:	1995/10/05 04:52:26

help/places

@@ -16,6 +16,9 @@ DESCRIPTION
 
     places(x,b) = 0 if and only if x is an integer.
 
+    If omitted, b is assumed to be 10.  If given, b must be an
+    integer > 1.
+
     places(x,b) = n > 0 if and only if the fractional part of abs(x)
     has a finite base-b "decimal" representation with n digits of which
     the last digit is nonzero.  This occurs if and only if every prime
@@ -29,7 +32,7 @@ EXAMPLE
     -1 3 1
 
 LIMITS
-    none
+    b > 1
 
 LINK LIBRARY
     long qplaces(NUMBER *q, ZVALUE base)
@@ -37,7 +40,7 @@ LINK LIBRARY
 SEE ALSO
     digit, digits
 
-## Copyright (C) 1999  Landon Curt Noll
+## Copyright (C) 1999-2003  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -53,8 +56,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.4 $
-## @(#) $Id: places,v 29.4 2000/12/17 12:27:58 chongo Exp $
+## @(#) $Revision: 29.5 $
+## @(#) $Id: places,v 29.5 2003/01/26 19:43:45 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/places,v $
 ##
 ## Under source code control:	1995/10/03 10:40:02

help/re

@@ -20,7 +20,7 @@ LIMITS
     none
 
 LINK LIBRARY
-    COMPLEX *cimag(COMPLEX *x)
+    COMPLEX *c_imag(COMPLEX *x)
 
 SEE ALSO
     im
@@ -41,8 +41,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: re,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: re,v 29.3 2002/03/12 09:38:26 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/re,v $
 ##
 ## Under source code control:	1995/10/05 04:52:27

help/str

@@ -18,7 +18,7 @@ DESCRIPTION
 
     For real or complex x, str(x) returns the string representing x
     in the current printing mode; configuration parameters affecting
-    this are "mode", "display", "outround", "tilde", "leadzero",
+    this are "mode", "mode2", "display", "outround", "tilde", "leadzero",
 
 EXAMPLE
     > str("")
@@ -28,6 +28,10 @@ EXAMPLE
     > print str(123), str("+"), str(4i), str("is the same as"), str(123+4i)
     123 + 4i is the same as 3+4i
 
+    > base2(16),
+    > print str(23209)
+    23209 /* 0x5aa9 */
+
 LIMITS
     none
 
@@ -41,9 +45,9 @@ LINK LIBRARY
     char *math_getdivertedio();
 
 SEE ALSO
-    XXX - fill in
+    base, base2, config
 
-## Copyright (C) 1999  Landon Curt Noll
+## Copyright (C) 1999-2002  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -59,8 +63,8 @@ SEE ALSO
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: str,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: str,v 29.3 2002/12/29 09:19:56 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/str,v $
 ##
 ## Under source code control:	1995/10/05 04:52:27

help/todo

@@ -59,6 +59,15 @@ Very High priority items:
     * Fix any 'Known bugs' as noted in the BUGS file or as
       displayed by 'calc help bugs'.
 
+    * Internationalize calc by converting calc error messages and
+      text strings (e.g., calc startup banner, show output, etc.)
+      into calls to the GNU gettext internationalization facility.
+      If somebody translated these strings into another language,
+      setting $LANG would allow calc to produce error messages
+      and text strings in that language.
+
+    * Consider using GNU autoconf / configure to build the calc Makefile.
+
 =-=
 
 High priority items:
@@ -76,8 +85,6 @@ High priority items:
     * Perform a code coverage analysis of the 'make check' action
       and improve the coverage (within reason) of the regress.cal suite.
 
-    * Create a Linux rpm (Red Hat Package Manager) package for calc.
-
     * Address, if possible and reasonable, any Calc Mis-features
       as noted in the BUGS file or as displayed by 'calc help bugs'.
 
@@ -115,9 +122,7 @@ Medium priority items:
     * Add a builtin function to access the 64 bit FNV hash which
       is currently being used internally in seed.c.
 
-    * Consider using configure to build the calc Makefile.
-
-## Copyright (C) 1999  Landon Curt Noll
+## Copyright (C) 1999-2003  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
 ## the terms of the version 2.1 of the GNU Lesser General Public License
@@ -133,8 +138,8 @@ Medium priority items:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.2 $
-## @(#) $Id: todo,v 29.2 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.5 $
+## @(#) $Id: todo,v 29.5 2003/02/25 20:26:17 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/todo,v $
 ##
 ## Under source code control:	1999/10/20 07:42:55

help/usage

@@ -148,10 +148,14 @@ Calc command line
 	       when the mode disables opening of files for reading.
 
 
-	  -n   Use the new configuration defaults instead of the old
-	       default classic defaults.  This flag as the same effect
-	       as executing config("all", "newcfg") at startup time.
+	  -O   Use the old classic defaults instead of the default
+	       configuration.  This flag as the same effect as executing
+	       config("all", "oldcfg") at startup time.
 
+	       NOTE: Older versions of calc used -n to setup a modified
+	       form of the default calc configuration.  The -n flag
+	       currently does  nothing.   Use of the -n flag is now
+	       deprecated and may used for something else in the future.
 
 	  -p   Pipe processing is enabled by use of -p.	 For example:
 
@@ -249,8 +253,8 @@ Calc command line
 			./myfile.cal
 			${LIBDIR}/myfile
 			${LIBDIR}/myfile.cal
-			${CUSTOMLIBDIR}/myfile
-			${CUSTOMLIBDIR}/myfile.cal
+			${CUSTOMCALDIR}/myfile
+			${CUSTOMCALDIR}/myfile.cal
 
 	  If the file is found, the search stops and the commands in
 	  the file are executed.  It is an error if no readable file
@@ -353,8 +357,8 @@ For more information use the following calc commands:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.3 $
-## @(#) $Id: usage,v 29.3 2000/06/07 14:02:33 chongo Exp $
+## @(#) $Revision: 29.6 $
+## @(#) $Id: usage,v 29.6 2003/06/10 21:39:34 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/help/RCS/usage,v $
 ##
 ## Under source code control:	1991/07/21 04:37:25

hist.h

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: hist.h,v 29.3 2001/03/17 21:31:47 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: hist.h,v 29.4 2002/03/12 09:40:57 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/hist.h,v $
  *
  * Under source code control:	1993/05/02 20:09:20
@@ -50,7 +50,11 @@
 #define HOMECHAR	'~'	/* char which indicates home directory */
 #define DOTCHAR		'.'	/* char which indicates current directory */
 #define PATHCHAR	'/'	/* char which separates path components */
+#if defined(__MSDOS__) || defined(__WIN32)
+#define LISTCHAR	';'	/* char which separates paths in a list */
+#else
 #define LISTCHAR	':'	/* char which separates paths in a list */
+#endif
 
 
 /*

input.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.5 $
- * @(#) $Id: input.c,v 29.5 2001/03/17 21:31:47 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: input.c,v 29.6 2002/03/12 09:40:57 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/input.c,v $
  *
  * Under source code control:	1990/02/15 01:48:16
@@ -46,6 +46,12 @@
 #include <unistd.h>
 #endif
 
+#if defined(__MSDOS__)
+#include <limits.h>
+#define _fullpath(f,n,s) (_fixpath(n,f),f)
+#define _MAX_PATH PATH_MAX
+#endif
+
 #include "calc.h"
 #include "conf.h"
 #include "hist.h"
@@ -816,11 +822,12 @@ runrcfiles(void)
  * given:
  *	sbuf		stat of the inode in question
  */
+
 static int
 isinoderead(struct stat *sbuf)
 {
 	int i;
-#if defined(_WIN32)
+#if defined(_WIN32) || defined(__MSDOS__)
 	char fullpathname[_MAX_PATH];
 #endif
 
@@ -832,11 +839,11 @@ isinoderead(struct stat *sbuf)
 
 	/* scan the entire readset */
 	for (i=0; i < maxreadset; ++i) {
-#if defined(_WIN32)
+#if defined(_WIN32) || defined(__MSDOS__)
 		if (readset[i].active &&
-		    strcmp(readset[i].path,
-		    	   _fullpath(fullpathname,cip->i_name,
-			   _MAX_PATH)) == 0) {
+		    strcasecmp(readset[i].path,
+		    	       _fullpath(fullpathname,cip->i_name,
+			       _MAX_PATH)) == 0) {
 			/* found a match */
 			return i;
 		}
@@ -954,14 +961,18 @@ addreadset(char *name, char *path, struct stat *sbuf)
 		return -1;
 	}
 	strcpy(readset[ret].name, name);
-#if defined(_WIN32)
+#if defined(_WIN32) || defined(__MSDOS__)
 	/*
 	 * For WIN32, _fullpath expands the path to a fully qualified
 	 * path name, which under WIN32 FAT and NTFS is unique, just
 	 * like UNIX inodes. _fullpath also allocated the memory for
 	 * this new longer path name.
 	 */
-	readset[ret].path = _fullpath(NULL, path, 0);
+ 	 {
+	 	char fullpathname[_MAX_PATH];
+
+		readset[ret].path = _fullpath(fullpathname, path, _MAX_PATH);
+	 }
 #else /* Windoz free systems */
 	readset[ret].path = (char *)malloc(strlen(path)+1);
 	if (readset[ret].path == NULL) {

lib_calc.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.7 $
- * @(#) $Id: lib_calc.c,v 29.7 2001/04/08 22:05:40 chongo Exp $
+ * @(#) $Revision: 29.9 $
+ * @(#) $Id: lib_calc.c,v 29.9 2003/08/26 04:36:10 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/lib_calc.c,v $
  *
  * Under source code control:	1996/06/17 18:06:19
@@ -106,10 +106,10 @@ extern uid_t geteuid();
 /*
  * Common definitions
  */
-int new_std = FALSE;	/* TRUE (-n) => use newstd configuration */
-int abortlevel;		/* current level of aborts */
-BOOL inputwait;		/* TRUE if in a terminal input wait */
-jmp_buf jmpbuf;		/* for errors */
+int use_old_std = FALSE;	/* TRUE => use old classic configuration */
+int abortlevel;			/* current level of aborts */
+BOOL inputwait;			/* TRUE if in a terminal input wait */
+jmp_buf jmpbuf;			/* for errors */
 char *program = "calc";		/* our name */
 char *base_name = "calc";	/* basename of our name */
 char cmdbuf[MAXCMD+1+1+1];	/* command line expression + "\n\0" + guard */
@@ -217,6 +217,11 @@ libcalc_call_me_first(void)
 	 */
 	if (program != NULL) {
 		p = strrchr(program, '/');
+#if defined(_WIN32) || defined(__MSDOS__)
+		if (p == NULL) {
+			p = strrchr(program, '\\');
+		}
+#endif
 		if (p == NULL) {
 			base_name = program;
 		} else {
@@ -227,23 +232,23 @@ libcalc_call_me_first(void)
 	/*
 	 * initialize old and new configuration values
 	 */
-	oldstd.epsilon = &_qonesqbase_; /* magic to fake early str2q() */
-	oldstd.program = strdup(program);
-	oldstd.base_name = strdup(base_name);
-	oldstd.version = strdup(version());
-	conf = config_copy(&oldstd); /* more magic to fake early str2q() */
+	newstd.epsilon = &_qonesqbase_; /* magic to fake early str2q() */
+	newstd.program = strdup(program);
+	newstd.base_name = strdup(base_name);
+	newstd.version = strdup(version());
+	conf = config_copy(&newstd); /* more magic to fake early str2q() */
 	conf->tab_ok = FALSE;
+	newstd.epsilon = str2q(EPSILON_DEFAULT);
 	oldstd.epsilon = str2q(EPSILON_DEFAULT);
-	newstd.epsilon = str2q(NEW_EPSILON_DEFAULT);
 
 	/*
-	 * make oldstd our default config
+	 * make newstd our default config, unless -O
 	 */
 	config_free(conf);
-	if (new_std) {
-		conf = config_copy(&newstd);
-	} else {
+	if (use_old_std) {
 		conf = config_copy(&oldstd);
+	} else {
+		conf = config_copy(&newstd);
 	}
 
 	/*

no_implicit.c

@@ -0,0 +1,47 @@
+/*
+ * no-implicit - Determine if the compiler allows -Wno-implicit
+ *
+ * Copyright (C) 2003  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.1 $
+ * @(#) $Id: no_implicit.c,v 29.1 2003/01/14 01:45:19 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/RCS/no_implicit.c,v $
+ *
+ * Under source code control:	2003/01/14 01:45:19
+ * File existed as early as:	2003
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+/*
+ * If we are able to compile this program, then we the compiler must
+ * allow the -Wno-implicit flag so we output the -Wno-implicit symbol.
+ */
+
+
+#include <stdio.h>
+
+int
+main(void)
+{
+	/* -Wno-implicit flag is allowed */
+	printf("-Wno-implicit\n");
+
+	/* exit(0); */
+	return 0;
+}

qfunc.c

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.4 $
- * @(#) $Id: qfunc.c,v 29.4 2000/12/17 13:07:32 chongo Exp $
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: qfunc.c,v 29.5 2003/01/26 19:41:35 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/qfunc.c,v $
  *
  * Under source code control:	1990/02/15 01:48:20
@@ -623,8 +623,16 @@ qilog(NUMBER *q, ZVALUE base)
 /*
  * Return the number of digits in the representation to a specified
  * base of the integral part of a number.
+ *
  * Examples: qdigits(3456,10) = 4, qdigits(-23.45, 10) = 2.
  *
+ * One should remember these special cases:
+ *
+ *	digits(12.3456) == 2    computes with the integer part only
+ *	digits(-1234) == 4      computes with the absolute value only
+ *	digits(0) == 1          specical case
+ *	digits(-0.123) == 1     combination of all of the above
+ *
  * given:
  *	q		number to count digits of
  */
@@ -634,8 +642,8 @@ qdigits(NUMBER *q, ZVALUE base)
 	long n;			/* number of digits */
 	ZVALUE temp;		/* temporary value */
 
-	if (zabsrel(q->num, q->den) < 1)
-		return 0;
+	if (zabsrel(q->num, q->den) < 0)
+		return 1;
 	if (qisint(q))
 		return 1 + zlog(q->num, base);
 	zquo(q->num, q->den, &temp, 2);

qio.c

@@ -1,7 +1,7 @@
 /*
  * qio - scanf and printf routines for arbitrary precision rational numbers
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 1999-2002  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: qio.c,v 29.3 2000/07/17 15:35:49 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: qio.c,v 29.4 2002/12/29 09:20:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/qio.c,v $
  *
  * Under source code control:	1993/07/30 19:42:46
@@ -180,9 +180,12 @@ qprintnum(NUMBER *q, int outmode)
 {
 	NUMBER tmpval;
 	long prec, exp;
+	int outmode2 = MODE2_OFF;
 
-	if (outmode == MODE_DEFAULT)
+	if (outmode == MODE_DEFAULT) {
 		outmode = conf->outmode;
+		outmode2 = conf->outmode2;
+	}
 	switch (outmode) {
 		case MODE_INT:
 			if (conf->tilde_ok && qisfrac(q))
@@ -248,6 +251,12 @@ qprintnum(NUMBER *q, int outmode)
 			math_error("Bad mode for print");
 			/*NOTREACHED*/
 	}
+
+	if (outmode2 != MODE2_OFF) {
+		PUTSTR(" /* ");
+		qprintnum(q, outmode2);
+		PUTSTR(" */");
+	}
 }
 
 

quickhash.c

@@ -1,7 +1,7 @@
 /*
- * quickhash - quickly hash a calc value using a partial Fowler/Noll/Vo hash
+ * quickhash - quickly hash a calc value using a quasi Fowler/Noll/Vo hash
  *
- * Copyright (C) 1999  Landon Curt Noll
+ * Copyright (C) 1999-2002  Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.4 $
- * @(#) $Id: quickhash.c,v 29.4 2001/04/14 22:47:21 chongo Exp $
+ * @(#) $Revision: 29.7 $
+ * @(#) $Id: quickhash.c,v 29.7 2003/03/01 01:21:12 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/quickhash.c,v $
  *
  * Under source code control:	1995/03/04 11:34:23
@@ -31,26 +31,6 @@
 /*
  * NOTE: This file does not contain a hash interface.  It is used by
  *	 associative arrays and other internal processes.
- *
- * We will compute a hash value for any type of calc value
- * for use in associative arrays and the hash() builtin.
- * Hash speed is of primary importance to make associative
- * arrays work at a reasonable speed.  For this reason, we
- * cut corners by hashing only a small part of a calc value.
- *
- * The Fowler/Noll/Vo hash does a very good job in producing
- * a 32 bit hash from ASCII strings in a short amount of time.
- * It is not bad for hashing calc data as well.	 So doing a
- * quick and dirty job of hashing on a part of a calc value,
- * combined with using a reasonable hash function will result
- * acceptable associative array performance.
- *
- * See:
- *	http://www.isthe.com/chongo/src/fnv/fnv_hash.tar.gz
- *	http://www.isthe.com/chongo/src/fnv/hash_32.c
- *	http://www.isthe.com/chongo/src/fnv/hash_64.c
- *
- * for information on 32bit and 64bit Fowler/Noll/Vo hashs.
  */
 
 
@@ -77,7 +57,7 @@ static QCKHASH blk_hash(BLOCK *blk, QCKHASH val);
 
 
 /*
- * FNV-0 - Fowler/Noll/Vo-0 32 bit hash
+ * quasi_fnv - quasi Fowler/Noll/Vo-0 32 bit hash
  *
  * The basis of this hash algorithm was taken from an idea sent
  * as reviewer comments to the IEEE POSIX P1003.2 committee by:
@@ -97,7 +77,7 @@ static QCKHASH blk_hash(BLOCK *blk, QCKHASH val);
  * collision rate. The FNV speed allows one to quickly hash lots
  * of data while maintaining a reasonable collision rate.  See:
  *
- *	http://www.isthe.com/chongo/tech/comp/fnv/
+ *	http://www.isthe.com/chongo/tech/comp/fnv/index.html
  *
  * for more details as well as other forms of the FNV hash.
  *
@@ -107,8 +87,55 @@ static QCKHASH blk_hash(BLOCK *blk, QCKHASH val);
  *
  * returns:
  *	the next 32 bit QCKHASH
+ *
+ * Example:
+ * 	QCKHASH val;
+ * 	int x;
+ *
+ * 	quasi_fnv(x, val);
+ *
+ * NOTE: The (x) argument may be an expression such as something with
+ * 	 a ++ or --.  The macro must only use (x) once.
+ *
+ * NOTE: The (val) argument just be a lvalue / something to which
+ * 	 a value can be assigned.
+ *
+ * The careful observer will note that (x) need not be a simple
+ * octet.  This is not a bug, but a feature.  The FNV hash was
+ * designed to operate on octets, not abstract objects such
+ * as associations, file descriptors and PRNG states.
+ * You will also notice that we sometimes add values directly
+ * to the (val) hash state.  This is a simulation of hashing
+ * a variable type.
+ *
+ * The Fowler/Noll/Vo hash does a very good job in producing
+ * a 32 bit hash arrays of octets in a short amount of time.
+ * It is not bad for hashing calc data as well.	 So doing a
+ * quick and dirty job of hashing on a part of a calc value
+ * is all that calc really needs.
+ *
+ * The core of the of the FNV hash has been adopted as the calc
+ * quick hash with the provision that it operates on 32 bit
+ * objects instead of octets.  For calc's internal purposes,
+ * this is sufficent.  For general FNV hashing, this is not
+ * recommended.
+ *
+ * It has been observed that gcc, when using -O, -O2, -O3 or
+ * better on an AMD or AMD-like processor (such as i686) will
+ * produce slightly faster code when using the shift/add
+ * expression than when performing a multiply with a constant.
  */
-#define fnv(x,val) (((QCKHASH)(val)*(QCKHASH)16777619) ^ ((QCKHASH)(x)))
+#if defined(NO_HASH_CPU_OPTIMIZATION)
+#define quasi_fnv(x,val) \
+    ((val) = (((QCKHASH)(val)*(QCKHASH)16777619) ^ ((QCKHASH)(x))))
+#else
+#define quasi_fnv(x,val) ( \
+    ((val) += (((QCKHASH)(val)<<1) + ((QCKHASH)(val)<<4) + \
+	       ((QCKHASH)(val)<<7) + ((QCKHASH)(val)<<8) + \
+	       ((QCKHASH)(val)<<24))), \
+    ((val) ^= (QCKHASH)(x)) \
+)
+#endif
 
 
 /*
@@ -159,7 +186,8 @@ hashvalue(VALUE *vp, QCKHASH val)
 {
 	switch (vp->v_type) {
 		case V_INT:
-			return fnv(vp->v_int, V_NUM+val);
+			val += V_NUM;
+			return quasi_fnv(vp->v_int, val);
 		case V_NUM:
 			return fnv_qhash(vp->v_num, val);
 		case V_COM:
@@ -177,7 +205,8 @@ hashvalue(VALUE *vp, QCKHASH val)
 		case V_MAT:
 			return mathash(vp->v_mat, val);
 		case V_FILE:
-			return fnv(vp->v_file, V_FILE+val);
+			val += V_FILE;
+			return quasi_fnv(vp->v_file, val);
 		case V_RAND:
 			return randhash(vp->v_rand, val);
 		case V_RANDOM:
@@ -189,7 +218,8 @@ hashvalue(VALUE *vp, QCKHASH val)
 		case V_BLOCK:
 			return blk_hash(vp->v_block, val);
 		case V_OCTET:
-			return fnv((int)*vp->v_octet, V_OCTET+val);
+			val += V_OCTET;
+			return quasi_fnv((int)*vp->v_octet, val);
 		case V_NBLOCK:
 			return blk_hash(vp->v_nblock->blk, val);
 		default:
@@ -207,7 +237,8 @@ static QCKHASH
 assochash(ASSOC *ap, QCKHASH val)
 {
 	/* XXX - hash the first and last values??? */
-	return fnv(ap->a_count, V_ASSOC+val);
+        val += V_ASSOC;
+	return quasi_fnv(ap->a_count, val);
 }
 
 
@@ -250,15 +281,16 @@ mathash(MATRIX *m, QCKHASH val)
 	/*
 	 * hash size parts of the matrix
 	 */
-	val = fnv(m->m_dim, V_MAT+val);
-	val = fnv(m->m_size, val);
+	val += V_MAT;
+	quasi_fnv(m->m_dim, val);
+	quasi_fnv(m->m_size, val);
 
 	/*
 	 * hash the matrix index bounds
 	 */
 	for (i = m->m_dim - 1; i >= 0; i--) {
-		val = fnv(m->m_min[i], val);
-		val = fnv(m->m_max[i], val);
+		quasi_fnv(m->m_min[i], val);
+		quasi_fnv(m->m_max[i], val);
 	}
 
 	/*
@@ -294,7 +326,7 @@ objhash(OBJECT *op, QCKHASH val)
 {
 	int i;
 
-	val = fnv(op->o_actions->oa_index, val);
+	quasi_fnv(op->o_actions->oa_index, val);
 
 	i = op->o_actions->oa_count;
 	while (--i >= 0)
@@ -323,10 +355,11 @@ randhash(RAND *r, QCKHASH val)
 		return V_RAND+val;
 	} else {
 		/* hash control values */
-		val = fnv(r->j, V_RAND+val);
-		val = fnv(r->k, val);
-		val = fnv(r->bits, val);
-		val = fnv(r->need_to_skip, val);
+	    	val += V_RAND;
+		quasi_fnv(r->j, val);
+		quasi_fnv(r->k, val);
+		quasi_fnv(r->bits, val);
+		quasi_fnv(r->need_to_skip, val);
 
 		/* hash the state arrays */
 		return fnv_fullhash(&r->buffer[0], SLEN+SCNT+SHUFLEN, val);
@@ -356,7 +389,8 @@ randomhash(RANDOM *state, QCKHASH val)
 	/*
 	 * hash a seeded RANDOM state
 	 */
-	val = fnv(state->buffer+state->bits, V_RANDOM+val);
+	val += V_RANDOM;
+	quasi_fnv(state->buffer+state->bits, val);
 	if (state->r.v != NULL) {
 		val = fnv_zhash(state->r, val);
 	}
@@ -382,6 +416,7 @@ config_hash(CONFIG *cfg, QCKHASH val)
 	 */
 	value = cfg->outmode;
 	value = (((value>>5) | (value<<27)) ^ (USB32)cfg->outmode);
+	value = (((value>>5) | (value<<27)) ^ (USB32)cfg->outmode2);
 	value = (((value>>5) | (value<<27)) ^ (USB32)cfg->outdigits);
 	/* epsilon is handeled out of order */
 	value = (((value>>5) | (value<<27)) ^ (USB32)cfg->epsilonprec);
@@ -423,7 +458,8 @@ config_hash(CONFIG *cfg, QCKHASH val)
 	/*
 	 * hash the built up scalar
 	 */
-	val = fnv(value, V_CONFIG+val);
+	val += V_CONFIG;
+	quasi_fnv(value, val);
 
 	/*
 	 * hash the strings if possible
@@ -471,7 +507,7 @@ fnv_strhash(char *ch, QCKHASH val)
 	 * hash each character in the string
 	 */
 	while (*ch) {
-		val = fnv(*ch++, val);
+		quasi_fnv(*ch++, val);
 	}
 	return val;
 }
@@ -499,7 +535,7 @@ fnv_STRhash(STRING *str, QCKHASH val)
 	 * hash each character in the string
 	 */
 	while (n-- > 0) {
-		val = fnv(*ch++, val);
+		quasi_fnv(*ch++, val);
 	}
 	return val;
 }
@@ -523,7 +559,7 @@ fnv_fullhash(FULL *v, LEN len, QCKHASH val)
 	 * hash each character in the string
 	 */
 	while (len-- > 0) {
-		val = fnv(*v++, val);
+		quasi_fnv(*v++, val);
 	}
 	return val;
 }
@@ -551,7 +587,8 @@ fnv_zhash(ZVALUE z, QCKHASH val)
 	/*
 	 * hash the sign
 	 */
-	val = fnv(z.sign, val + V_NUM);
+	val += V_NUM;
+	quasi_fnv(z.sign, val);
 
 	n = z.len;
 	hp = z.v;
@@ -560,15 +597,15 @@ fnv_zhash(ZVALUE z, QCKHASH val)
 	while (n > 1) {
 		f = (FULL) *hp++;
 		f |= (FULL) *hp++ << BASEB;
-		val = fnv(f, val);
+		quasi_fnv(f, val);
 		n -= 2;
 	}
 	if (n) {
-		val = fnv(*hp, val);
+		quasi_fnv(*hp, val);
 	}
 #else
 	while (n--  > 0) {
-		val = fnv(*hp, val);
+		quasi_fnv(*hp, val);
 		++hp;
 	}
 #endif
@@ -595,7 +632,7 @@ hash_hash(HASH *hash, QCKHASH val)
 	 * hash each USB8 in the BLOCK
 	 */
 	for (i=0; i < hash->unionsize; ++i) {
-		val = fnv(hash->h_union.data[i], val);
+		quasi_fnv(hash->h_union.data[i], val);
 	}
 	return val;
 }
@@ -624,7 +661,7 @@ blk_hash(BLOCK *blk, QCKHASH val)
 	 */
 	if (blk->datalen > 0) {
 		for (i=0; i < blk->datalen; ++i) {
-			val = fnv(blk->data[i], val);
+			quasi_fnv(blk->data[i], val);
 		}
 	}
 	return val;

rpm.mk

@@ -0,0 +1,183 @@
+#!/bin/make
+#****h* calc/rpm.mk
+#
+# rpm.mk - Makefile for building rpm packages for calc
+#
+# Copyright (C) 2003  Petteri Kettunen and Landon Curt Noll
+#
+# Calc is open software; you can redistribute it and/or modify it under
+# the terms of the version 2.1 of the GNU Lesser General Public License
+# as published by the Free Software Foundation.
+#
+# Calc is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+# Public License for more details.
+#
+# A copy of version 2.1 of the GNU Lesser General Public License is
+# distributed with calc under the filename COPYING-LGPL.  You should have
+# received a copy with calc; if not, write to Free Software Foundation, Inc.
+# 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+#
+MAKEFILE_REV= $$Revision: 29.13 $$
+# @(#) $Id: rpm.mk,v 29.13 2003/04/15 03:39:17 chongo Exp $
+# @(#) $Source: /usr/local/src/cmd/calc/RCS/rpm.mk,v $
+#
+# Under source code control:	2003/02/16 20:21:39
+# File existed as early as:	2003
+#
+# chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+# Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+#
+# calculator by David I. Bell with help/mods from others
+# Makefile by Petteri Kettunen with modifications from Landon Curt Noll
+
+# setup
+#
+SHELL= /bin/sh
+RPMBUILD_TOOL= rpmbuild
+TARCH= i686
+RPMBUILD_OPTION= -ba --target=${TARCH}
+RPM_TOOL= rpm
+MD5SUM= md5sum
+SHA1SUM= sha1sum
+SED= sed
+
+# rpm-related parameters
+#
+PROJECT_NAME= calc
+PROJECT_VERSION=
+PROJECT_RELEASE=
+PROJECT= $(PROJECT_NAME)-$(PROJECT_VERSION)
+SPECFILE= $(PROJECT_NAME).spec
+TARBALL= $(PROJECT).tar.gz
+RPM686= $(PROJECT)-$(PROJECT_RELEASE).${TARCH}.rpm
+DRPM686= $(PROJECT_NAME)-devel-$(PROJECT_VERSION)-$(PROJECT_RELEASE).${TARCH}.rpm
+SRPM= $(PROJECT)-$(PROJECT_RELEASE).src.rpm
+TMPDIR= /var/tmp
+RHDIR= /usr/src/redhat
+
+all: calc.spec ver_calc
+	$(MAKE) -f rpm.mk PROJECT_VERSION="`./ver_calc`" \
+		PROJECT_RELEASE="`${SED} -n -e '/^Release:/s/^Release: *//p' \
+				  calc.spec.in`" rpm
+
+pkgme: $(PROJECT_NAME)-spec.tar.gz
+
+ver_calc:
+	$(MAKE) -f Makefile ver_calc
+
+.PHONY: vers
+vers:
+	$(MAKE) -f Makefile ver_calc
+
+calc.spec: calc.spec.in ver_calc
+	rm -f calc.spec
+	${SED} -e 's/<<<PROJECT_VERSION>>>/'"`./ver_calc`"/g \
+	    calc.spec.in > calc.spec
+
+.PHONY: srcpkg
+srcpkg: make_rhdir
+	find . -depth -print | egrep -v '/RCS|/CVS|/NOTES|\.gone' | \
+	    cpio -dumpv $(TMPDIR)/$(PROJECT)
+	(cd $(TMPDIR); tar cf - $(PROJECT) | \
+	  gzip -c > $(RHDIR)/SOURCES/$(TARBALL))
+	rm -fr $(TMPDIR)/$(PROJECT)
+
+.PHONY: rpm
+rpm: srcpkg calc.spec
+	$(MAKE) -f Makefile clean
+	cp $(SPECFILE) $(RHDIR)/SPECS/$(SPECFILE)
+	rm -f $(RHDIR)/RPMS/${TARCH}/$(RPM686)
+	rm -f $(RHDIR)/RPMS/${TARCH}/$(DRPM686)
+	rm -f $(RHDIR)/SRPMS/$(SRPM)
+	${RPMBUILD_TOOL} ${RPMBUILD_OPTION} $(RHDIR)/SPECS/$(SPECFILE)
+	@if [ ! -f "$(RHDIR)/SRPMS/$(SRPM)" ]; then \
+	    echo "SRPMS/$(SRPM) not found" 1>&2; \
+	    exit 3; \
+	fi
+	@echo
+	@echo "RPM package sizes:"
+	@echo
+	@cd $(RHDIR); ls -1s RPMS/${TARCH}/$(RPM686) \
+	    RPMS/${TARCH}/$(DRPM686) SRPMS/$(SRPM)
+	@echo
+	@echo "RPM package md5 hashes:"
+	@echo
+	-@cd $(RHDIR); ${MD5SUM} RPMS/${TARCH}/$(RPM686) \
+	    RPMS/${TARCH}/$(DRPM686) SRPMS/$(SRPM)
+	@echo
+	@echo "RPM package sha1 hashes:"
+	@echo
+	-@cd $(RHDIR); ${SHA1SUM} RPMS/${TARCH}/$(RPM686) \
+	    RPMS/${TARCH}/$(DRPM686) SRPMS/$(SRPM)
+	@echo
+	@echo "RPM package locations:"
+	@echo
+	@ls -1 $(RHDIR)/RPMS/${TARCH}/$(RPM686) \
+	    $(RHDIR)/RPMS/${TARCH}/$(DRPM686) $(RHDIR)/SRPMS/$(SRPM)
+	@echo
+	@echo "All done! -- Jessica Noll, Age 2"
+	@echo
+
+.PHONY: make_rhdir
+make_rhdir:
+	for i in $(RHDIR) $(RHDIR)/RPMS $(RHDIR)/SOURCES \
+	  $(RHDIR)/SPECS $(RHDIR)/SRPMS $(RHDIR)/BUILD; do \
+	    if [ ! -d $$i ] ; then \
+		mkdir -p $$i; \
+	    fi; \
+	done;
+
+# date format for spec file
+.PHONY: logdate
+logdate:
+	echo "`date +'* %a %b %d %Y'` `whoami`"
+
+.PHONY: chkpkg
+chkpkg:
+	for i in $(RHDIR)/RPMS/${TARCH}/$(RPM686) \
+		 $(RHDIR)/RPMS/${TARCH}/$(DRPM686) \
+	  	 $(RHDIR)/SRPMS/$(SRPM) ; do \
+	    echo "***** start $$i" ; \
+		${RPM_TOOL} -qpi $$i ; \
+		echo "***** files $$i" ; \
+	    ${RPM_TOOL} -qpl $$i ; \
+	    echo "***** end $$i" ; \
+	done ;
+
+.PHONY: chksys
+chksys:
+	${RPM_TOOL} -qa | grep $(PROJECT_NAME)
+	${RPM_TOOL} -qa | grep $(PROJECT_NAME)-devel
+
+.PHONY: test
+test: ver_calc
+	@if [ X"`id -u`" != X"0" ]; then \
+	    echo "test needs to install, must be root to test" 1>&2; \
+	    exit 4; \
+	fi
+	$(MAKE) -f rpm.mk PROJECT_VERSION="`./ver_calc`" installrpm chksys
+
+.PHONY: installrpm
+installrpm:
+	@if [ X"`id -u`" != X"0" ]; then \
+	    echo "must be root to install RPMs" 1>&2; \
+	    exit 5; \
+	fi
+	${RPM_TOOL} -ivh $(RHDIR)/RPMS/${TARCH}/$(RPM686)
+	${RPM_TOOL} -ivh $(RHDIR)/RPMS/${TARCH}/$(DRPM686)
+
+.PHONY: uninstallrpm
+uninstallrpm:
+	@if [ X"`id -u`" != X"0" ]; then \
+	    echo "must be root to uninstall RPMs" 1>&2; \
+	    exit 6; \
+	fi
+	${RPM_TOOL} -e $(PROJECT_NAME)-devel
+	${RPM_TOOL} -e $(PROJECT_NAME)
+
+$(PROJECT_NAME)-spec.tar.gz: rpm.mk $(PROJECT_NAME).spec.in
+	tar cf - $^ | gzip -c > $@
+
+#****

sample/Makefile

@@ -17,8 +17,8 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.14 $
-# @(#) $Id: Makefile,v 29.14 2001/06/08 22:38:53 chongo Exp $
+# @(#) $Revision: 29.17 $
+# @(#) $Id: Makefile,v 29.17 2003/01/14 02:00:23 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/sample/RCS/Makefile,v $
 #
 # Under source code control:	1997/04/19 22:46:49
@@ -75,41 +75,111 @@ SAMPLE_OBJ= many_random.o test_random.o
 #Q=
 Q=@
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
+####
+
+# Where the system include (.h) files are kept
 #
-# where things go
+# For DJGPP, select:
 #
-# ${BINDIR}		where to install binary files
-# ${SHAREDIR}		where most common shared files are kept
-# ${INCDIR}		where most .h files are kept
-# ${LIBDIR}		where *.a files are installed
+#	INCDIR= /dev/env/DJDIR/include
 #
-# ${CSHAREDIR}		where most common shared calc files are kept
-# ${HELPDIR}		where the help directory is installed.
+# If in doubt, set:
+#
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
 #
 #BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
 BINDIR= /usr/bin
-#BINDIR= /usr/contrib/bin
-#
-#SHAREDIR= /usr/local/lib
-SHAREDIR= /usr/share
-#
-#INCDIR= /usr/local/include
-INCDIR= /usr/include
-#
+
 #LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
 LIBDIR= /usr/lib
 
-CSHAREDIR= ${SHAREDIR}/calc
-HELPDIR= ${LIBDIR}/help
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
+SCRIPTDIR= ${BINDIR}/cscript
 
 # T - top level directory under which calc will be installed
 #
 # The calc install is performed under $T, the calc build is
-# performed under /.  The purpose for $T is to allow someone to
-# install calc somewhere other than into the system area.  For example
-# when forming the calc rpm, the Makefile is called with T=$RPM_BUILD_ROOT.
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
 #
 # If $T is empty, calc is installed under /, which is the same
 # top of tree for which it was built.  If $T is non-empty, then
@@ -359,8 +429,10 @@ many_random: many_random.o ../libcalc.a
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q}for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo sample/$$i; \
+	    fi; \
 	done
 
 distdir:
@@ -396,11 +468,14 @@ depend:
 	-${Q}rm -rf skel
 	${Q}mkdir skel
 	${Q}mkdir skel/sample
-	-${Q}for i in ${C_SRC}; do \
+	-${Q}for i in ${C_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		${SED} -n '/^#[	 ]*include[	 ]*"/p' \
 		    "$$i" > "skel/sample/$$i"; \
+	    fi; \
 	done
 	-${Q}for i in ${H_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		if [ X"$$i" != X"/dev/null" ]; then \
 		    tag="`echo $$i | ${SED} 's/[\.+,:]/_/g'`"; \
 		    echo "#if !defined($$tag)" > "skel/sample/$$i"; \
@@ -409,18 +484,21 @@ depend:
 			>> "skel/sample/$$i"; \
 		    echo '#endif /* '"$$tag"' */' >> "skel/sample/$$i"; \
 		fi; \
+	    fi; \
 	done
 	${Q}(cd ..; ${MAKE} hsrc)
 	${Q}for i in `cd ..; ${MAKE} h_list 2>&1 | \
 			     ${SED} -e '/Entering directory/d' \
 				    -e '/Nothing to be done/d' \
-				    -e '/Leaving directory/d'`; do \
+				    -e '/Leaving directory/d'` /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		tag="`echo $$i | ${SED} 's/[\.+,:]/_/g'`"; \
 		echo "#if !defined($$tag)" > "skel/$$i"; \
 		echo "#define $$tag" >> "skel/$$i"; \
 		${SED} -n '/^#[	 ]*include[	 ]*"/p' "../$$i" \
 		    >> "skel/$$i"; \
 		echo '#endif /* '"$$tag"' */' >> "skel/$$i"; \
+	    fi; \
 	done
 	-${Q}rm -f skel/sample/makedep.out
 	${Q}echo sample/skel formed
@@ -428,8 +506,10 @@ depend:
 	${Q}echo "# DO NOT DELETE THIS LINE -- make depend depends on it." > \
 	    skel/sample/makedep.out
 	${Q}cd skel/sample; ${MAKEDEPEND} -w 1 -f makedep.out -I.. ${C_SRC}
-	-${Q}for i in ${C_SRC}; do \
+	-${Q}for i in ${C_SRC} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo "$$i" | ${SED} 's/^\(.*\)\.c/\1.o: \1.c/'; \
+	    fi; \
 	done >> skel/sample/makedep.out
 	${Q}echo sample dependency list formed
 	${Q}echo forming new sample/Makefile
@@ -491,7 +571,6 @@ install: all
 
 # DO NOT DELETE THIS LINE
 
-
 many_random.o: ../alloc.h
 many_random.o: ../block.h
 many_random.o: ../byteswap.h

seed.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.5 $
- * @(#) $Id: seed.c,v 29.5 2001/05/08 06:44:29 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: seed.c,v 29.6 2003/01/14 00:51:53 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/seed.c,v $
  *
  * Under source code control:	1999/10/03 10:06:53
@@ -41,6 +41,11 @@
 #include <stdio.h>
 #include <errno.h>
 
+#include "have_stdlib.h"
+#if defined(HAVE_STDLIB_H)
+#include <stdlib.h>
+#endif
+
 #include "have_unistd.h"
 #if defined(HAVE_UNISTD_H)
 #include <unistd.h>

version.c

@@ -1,7 +1,7 @@
 /*
  * version - determine the version of calc
  *
- * Copyright (C) 1999  David I. Bell and Landon Curt Noll
+ * Copyright (C) 1999-2003  David I. Bell and Landon Curt Noll
  *
  * Primary author:  David I. Bell
  *
@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.37 $
- * @(#) $Id: version.c,v 29.37 2001/12/31 22:12:35 chongo Exp $
+ * @(#) $Revision: 29.48 $
+ * @(#) $Id: version.c,v 29.48 2003/08/26 04:35:32 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/version.c,v $
  *
  * Under source code control:	1990/05/22 11:00:58
@@ -45,8 +45,8 @@ static char *program;
 
 #define MAJOR_VER	2	/* major version */
 #define MINOR_VER	11	/* minor version */
-#define MAJOR_PATCH	5	/* patch level or 0 if no patch */
-#define MINOR_PATCH	6	/* test number or 0 if no minor patch */
+#define MAJOR_PATCH	8	/* patch level or 0 if no patch */
+#define MINOR_PATCH	1	/* test number or 0 if no minor patch */
 
 
 /*
@@ -70,7 +70,7 @@ static char *stored_version = NULL;	/* version formed if != NULL */
 char *Copyright = "\n"
   "calc - arbitrary precision calculator\n"
   "\n"
-  "@(#) Copyright (C) 1999  David I. Bell, Landon Curt Noll and Ernest Bowen\n"
+  "@(#) Copyright (C) 2003  David I. Bell, Landon Curt Noll and Ernest Bowen\n"
   "\n"
   "Primary author:  David I. Bell\n"
   "\n"
@@ -93,6 +93,22 @@ char *Copyright = "\n"
   "\n";
 
 
+#if !defined(HAVE_SNPRINTF)
+/* Simulate snprintf with vsprintf, hoping that BUFSIZ is large enough.  */
+#include <stdarg.h>
+int
+snprintf (char *buf, size_t n, const char *fmt, ...)
+{
+  int retval;
+  va_list arg;
+
+  va_start (arg, fmt);
+  retval = vsprintf (buf, fmt, arg);
+  va_end (arg);
+  return retval;
+}
+#endif
+
 /*
  * version - return version string
  *

win32.mkdef

@@ -36,8 +36,8 @@ HAVE_UNISTD_H=NO
 
 LIBDIR=/lib/calc
 HELPDIR=/lib/calc/help
-INCDIRCALC=/include/calc
-CUSTOMLIBDIR=/lib/calc/custom
+CALC_INCDIR=/include/calc
+CUSTOMCALDIR=/lib/calc/custom
 CUSTOMHELPDIR=/lib/calc/help/custhelp
 SCRIPTDIR=/lib/calc/cscript
 MANDIR=

win32/have_malloc.h

@@ -7,7 +7,7 @@
 #define __HAVE_MALLOC_H__
 
 
-/* do we have /usr/include/malloc.h? */
+/* do we have <malloc.h>? */
 #define HAVE_MALLOC_H	 /* yes */
 
 

win32/have_stdlib.h

@@ -7,7 +7,7 @@
 #define __HAVE_STDLIB_H__
 
 
-/* do we have /usr/include/stdlib.h? */
+/* do we have <stdlib.h>? */
 #define HAVE_STDLIB_H	/* yes */
 
 

win32/have_string.h

@@ -7,7 +7,7 @@
 #define __HAVE_STRING_H__
 
 
-/* do we have /usr/include/string.h? */
+/* do we have <string.h>? */
 #define HAVE_STRING_H	/* yes */
 
 

win32/have_times.h

@@ -7,7 +7,7 @@
 #define __HAVE_TIMES_H__
 
 
-/* do we have /usr/include/times.h? */
+/* do we have <times.h>? */
 #undef HAVE_TIMES_H  /* no */
 #undef HAVE_SYS_TIMES_H  /* no */
 #define HAVE_TIME_H	/* yes */

win32/have_unistd.h

@@ -7,7 +7,7 @@
 #define __HAVE_UNISTD_H__
 
 
-/* do we have /usr/include/unistd.h? */
+/* do we have <unistd.h>? */
 #undef HAVE_UNISTD_H  /* no */
 
 

zfunc.c

@@ -19,8 +19,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: zfunc.c,v 29.3 2000/07/17 15:35:49 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: zfunc.c,v 29.4 2003/08/26 04:35:11 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/zfunc.c,v $
  *
  * Under source code control:	1990/02/15 01:48:27
@@ -817,7 +817,9 @@ zgcd(ZVALUE z1, ZVALUE z2, ZVALUE *res)
 	needw = TRUE;
 
 	w = 0;
+	j = 0;
 	while (m) {				/* START OF MAIN LOOP */
+	   if (m - n < 2 || needw) {
 		q = 0;
 		u = *a0;
 		v = 1;
@@ -872,6 +874,8 @@ zgcd(ZVALUE z1, ZVALUE z2, ZVALUE *res)
 			else g &= BASE1;
 		}
 		else g = 1;
+	   } else
+		g = (HALF) *a0 * w;
 		a = a0;
 		b = b0;
 		i = n;
@@ -947,6 +951,10 @@ zgcd(ZVALUE z1, ZVALUE z2, ZVALUE *res)
 			}
 			a0 += q;
 			m -= q;
+			while (m && !*a0) { /* Removing trailing zeros */
+				m--;
+				a0++;
+			}
 		}
 		while (m && !a0[m-1]) m--;	/* Removing leading zeros */
 	}

zio.c

@@ -1,7 +1,7 @@
 /*
  * zio - scanf and printf routines for arbitrary precision integers
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 1999-2002  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: zio.c,v 29.3 2000/07/17 15:35:49 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: zio.c,v 29.4 2002/12/29 09:20:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/zio.c,v $
  *
  * Under source code control:	1993/07/30 19:42:48
@@ -52,6 +52,7 @@ struct iostate {
 	IOSTATE *oldiostates;		/* previous saved state */
 	long outdigits;			/* digits for output */
 	int outmode;			/* output mode */
+	int outmode2;			/* secondary output mode */
 	FILE *outfp;			/* file unit for output (if any) */
 	char *outbuf;			/* output string buffer (if any) */
 	long outbufsize;		/* current size of string buffer */
@@ -214,6 +215,7 @@ math_divertio(void)
 	sp->oldiostates = oldiostates;
 	sp->outdigits = conf->outdigits;
 	sp->outmode = conf->outmode;
+	sp->outmode2 = conf->outmode2;
 	sp->outfp = outfp;
 	sp->outbuf = outbuf;
 	sp->outbufsize = outbufsize;
@@ -254,6 +256,7 @@ math_getdivertedio(void)
 	oldiostates = sp->oldiostates;
 	conf->outdigits = sp->outdigits;
 	conf->outmode = sp->outmode;
+	conf->outmode2 = sp->outmode2;
 	outfp = sp->outfp;
 	outbuf = sp->outbuf;
 	outbufsize = sp->outbufsize;
@@ -314,6 +317,25 @@ math_setmode(int newmode)
 }
 
 
+/*
+ * Set the secondary output mode for numeric output.
+ * This also returns the previous mode.
+ */
+int
+math_setmode2(int newmode)
+{
+	int oldmode;
+
+	if (newmode != MODE2_OFF && ((newmode <= MODE_DEFAULT) || (newmode > MODE_MAX))) {
+		math_error("Setting illegal secondary output mode");
+		/*NOTREACHED*/
+	}
+	oldmode = conf->outmode2;
+	conf->outmode2 = newmode;
+	return oldmode;
+}
+
+
 /*
  * Set the number of digits for float or exponential output.
  * This also returns the previous number of digits.

zmath.h

@@ -1,7 +1,7 @@
 /*
  * zmath - declarations for extended precision integer arithmetic
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 1999-2002  David I. Bell
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.7 $
- * @(#) $Id: zmath.h,v 29.7 2001/06/08 21:00:58 chongo Exp $
+ * @(#) $Revision: 29.10 $
+ * @(#) $Id: zmath.h,v 29.10 2003/01/14 00:44:39 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/zmath.h,v $
  *
  * Under source code control:	1993/07/30 19:42:48
@@ -131,7 +131,7 @@ typedef SB32 SFULL;			/* signed FULL */
 
 #define TOPFULL ((FULL)1 << (FULL_BITS-1))	/* highest bit in FULL */
 #define MAXFULL (TOPFULL - (FULL)1)		/* largest SFULL value */
-#define MAXUFULL (MAXFULL | TOPHALF)		/* largest FULL value */
+#define MAXUFULL (MAXFULL | TOPFULL)		/* largest FULL value */
 
 #define TOPLONG ((unsigned long)1 << (LONG_BITS-1))	/* top long bit */
 #define MAXLONG ((long) (TOPLONG - (unsigned long)1))	/* largest long val */
@@ -552,8 +552,10 @@ extern DLL void zredcpower(REDC *rp, ZVALUE z1, ZVALUE z2, ZVALUE *res);
 #define MODE_OCTAL	6
 #define MODE_BINARY	7
 #define MODE_MAX	7
+#define MODE2_OFF	(MODE_MAX+1)
 
 #define MODE_INITIAL	MODE_REAL
+#define MODE2_INITIAL	MODE2_OFF
 
 
 /*
@@ -567,6 +569,7 @@ extern DLL void math_divertio(void);
 extern DLL void math_cleardiversions(void);
 extern DLL char *math_getdivertedio(void);
 extern DLL int math_setmode(int mode);
+extern DLL int math_setmode2(int mode);
 extern DLL LEN math_setdigits(LEN digits);
 extern DLL void math_fmt(char *, ...);
 

zrand.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.4 $
- * @(#) $Id: zrand.c,v 29.4 2001/05/08 06:44:29 chongo Exp $
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: zrand.c,v 29.5 2003/01/14 00:54:24 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/zrand.c,v $
  *
  * Under source code control:	1995/01/07 09:45:25
@@ -353,6 +353,7 @@
  * (used by more than one input seed).
  */
 
+#include <stdio.h>
 
 #include "zrand.h"
 #include "have_const.h"

zrandom.c

@@ -17,8 +17,8 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.3 $
- * @(#) $Id: zrandom.c,v 29.3 2001/05/08 06:44:29 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: zrandom.c,v 29.4 2002/12/29 06:35:08 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/zrandom.c,v $
  *
  * Under source code control:	1997/02/15 04:01:56
@@ -2280,7 +2280,7 @@ zrandomrange(CONST ZVALUE low, CONST ZVALUE high, ZVALUE *res)
 	zsub(high, low, &range);
 	if (zisone(range)) {
 		zfree_random(range);
-		*res = low;
+		zcopy(low, res);
 		return;
 	}
 	zsub(range, _one_, &rangem1);