Release calc version 2.11.9.3

BUGS

@@ -20,20 +20,28 @@ configuration, try backing them out and see if things get better.
 
 To be sure that your version of calc is up to date, check out:
 
-	http://reality.sgi.com/chongo/tech/comp/calc/calc-download.html
+	http://www.isthe.com/chongo/tech/comp/calc/calc-download.html
 
 The calc web site is located at:
 
-	http://reality.sgi.com/chongo/tech/comp/calc/index.html
+	http://www.isthe.com/chongo/tech/comp/calc/index.html
 
 =-=
 
 If you have tried all of the above and things still are not right,
-then it may be time to send in a bug report.  You can send bug reports to:
+then it may be time to send in a bug report.  You can send bug
+and bug fixes reports to:
 
-    calc-bugs at postofc dot corp dot sgi dot com
+    calc-bugs at asthe dot com
 
-    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+    [[ NOTE: The EMail address uses 'asthe', the web site URL uses 'isthe' ]]
+
+Your subject must contain the words:
+
+       calc bug report
+
+You may have additional words in your subject line.
 
 When you send your report, please include the following information:
 
@@ -53,17 +61,8 @@ When you send your report, please include the following information:
 
 Stack traces from core dumps are useful to send as well.
 
-=-=
-
-Send any comments, compiler warning messages, suggestions and most
-importantly, fixes (in the form of a context diff patch) to:
-
-    calc-tester at postofc dot corp dot sgi dot com
-
-    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-
-You should use the above calc-bugs address for bug reports, if you are
-not currently a member of the calc-tester mailing list.
+Fell free to use the above address to send in big fixes (in the form
+of a context diff patch).
 
 =-=
 
@@ -73,14 +72,104 @@ Known bugs:
     us know!  See the above for details on how to report and were to
     EMail your bug reports and hopefully patches to fix them.
 
-=-=
-
 Problems with known work-a-rounds:
 
+    * The gcc as shipped with Redhat 7 perhaps other Linux distributions
+      has a bug causes calc to dump core on startup when calc is:
+
+	  compiled optimized (-O, -O1, -O2 or -O3)
+
+	  	AND
+
+      	  compiled with debugging (-g or -g3)
+
+	  	AND
+
+	  when calc is compiled with readline (see USE_READLINE,
+	    READLINE_LIB and READLINE_INCLUDE in the Makefile)
+
+      On Redhat, the gcc -v which has this problem is:
+
+	gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-85)
+
+      there may be other gcc versions that also suffer this fate.
+
+      The readlines associated with problem are:
+
+	readline-4.1-5
+	readline2.2.1-2.2.1-2
+	readline-devel-4.1-5
+
+      One work-a-round is to compile calc WITHOUT readline.  In the
+      Makefile be sure that:
+
+	USE_READLINE=
+	READLINE_LIB=
+	READLINE_INCLUDE=
+
+      i.e., these Makefile vars are empty.
+
+      If you must use readline, then an alternate work-a-round is to
+      change the DEBUG Makefile variable to either:
+
+	compile for speed:  -O3		(or -O2 if you do not have -O3)
+	compile to debug:   -g3		(or -g if you do not have -g3)
+
+      but not both.
+
+      See RH bug #57889 for details:
+
+	http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=57889
+
     * There is a bug in gcc-2.95 that causes calc, when compiled with -O2,
       to fail the regression test.  The work-a-round is to compile with -O
       or to use gcc-2.96 or later.
 
+      This bug has been observed on the Sparc and the PowerPC machine.
+
+      On the PowerPC with gcc-2.95 when compiled with -O2, the following
+      patch seems to help:
+
+*** zfunc.c.orig        Fri Feb 23 18:18:39 2001
+--- zfunc.c     Fri Feb 23 18:39:33 2001
+***************
+*** 1481,1487 ****
+  {
+        HALF *a, *A, *b, *a0, u;
+        int i, j, j1, j2, k, k1, m, m0, m1, n, n0, o;
+!       FULL d, e, f, g, h, s, t, x, topbit;
+        int remsign;
+        BOOL up, onebit;
+        ZVALUE sqrt;
+--- 1481,1488 ----
+  {
+        HALF *a, *A, *b, *a0, u;
+        int i, j, j1, j2, k, k1, m, m0, m1, n, n0, o;
+!       volatile FULL d;
+!       FULL e, f, g, h, s, t, x, topbit;
+        int remsign;
+        BOOL up, onebit;
+        ZVALUE sqrt;
+*** zmath.c	2000/06/07 14:02:13	29.2
+--- zmath.c	2001/03/13 19:47:03
+***************
+*** 1608,1614 ****
+  void
+  zbitvalue(long n, ZVALUE *res)
+  {
+! 	ZVALUE z;
+
+  	if (n < 0) n = 0;
+  	z.sign = 0;
+--- 1608,1614 ----
+  void
+  zbitvalue(long n, ZVALUE *res)
+  {
+! 	volatile ZVALUE z;
+
+  	if (n < 0) n = 0;
+  	z.sign = 0;
+
     * Solaris cc somtimes barfs while compiling zrand.c.  In particular, calc
       barfs on on the SVAL macro.  The work-a-round is to use the Solaric cc
       Makefile set sets -DFORCE_STDC.  I.e,:
@@ -161,6 +250,28 @@ Problems with known work-a-rounds:
       or performance.  The work-a-round is to ignore these warnings
       under BSDI.
 
+    * The chi.cal resource file does not work well with odd degrees
+      of freedom.  Can someone improve this algorithm?
+
+    * The intfile.cal resource file reads and writes big or little Endian
+      integers to/from files the hard way.  It does NOT use blkcpy.  The
+      following code:
+
+	i = (ord("\n") << 16) | (ord("i") << 8) | ord("H")
+	b = blk()
+	copy(i, b)
+	fd = fopen("file", "w")
+	copy(b, fd);
+	fclose(fd)
+
+      will write an extra NUL octet to the file.  Where as:
+
+	read intfile
+	i = (ord("\n") << 16) | (ord("i") << 8) | ord("H")
+	be2file(i, "file2")
+
+      will not.
+
 ## Copyright (C) 1999  Landon Curt Noll
 ##
 ## Calc is open software; you can redistribute it and/or modify it under
@@ -177,12 +288,12 @@ Problems with known work-a-rounds:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.4 $
-## @(#) $Id: BUGS,v 29.4 1999/12/15 09:13:29 chongo Exp $
+## @(#) $Revision: 29.17 $
+## @(#) $Id: BUGS,v 29.17 2001/12/31 22:12:35 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/BUGS,v $
 ##
 ## Under source code control:	1994/03/18 14:06:13
 ## File existed as early as:	1994
 ##
-## chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-## Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+## chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+## Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/

COPYING

@@ -12,8 +12,8 @@ This file is Copyrighted
 	Everyone is permitted to copy and distribute verbatim copies
 	of this license document, but changing it is not allowed.
 
-    # @(#) $Revision: 29.1 $
-    # @(#) $Id: COPYING,v 29.1 1999/12/14 09:15:29 chongo Exp $
+    # @(#) $Revision: 29.7 $
+    # @(#) $Id: COPYING,v 29.7 2003/02/26 16:54:59 chongo Exp $
     # @(#) $Source: /usr/local/src/cmd/calc/RCS/COPYING,v $
 
 =-=
@@ -55,16 +55,43 @@ Calc is covered by the GNU Lesser General Public License
 
     The contact addresses for calc is as follows:
 
-	Web:	http://reality.sgi.com/chongo/tech/comp/calc/index.html
-		http://www.isthe.com/chongo/tech/comp/calc/index.html
+	Web:	http://www.isthe.com/chongo/tech/comp/calc/email.html
 
-	EMail:	calc-tester at postofc dot corp dot sgi dot com
-		calc-tester at isthe dot com
+    To join the low volume calc mailing list.  Send a EMail message to:
 
-		[[ Replace 'at' with @, 'dot' is with . and remove spaces ]]
+	calc-tester-request at asthe dot com
 
-    The 2nd address set is provided in case the 1st address set no
-    longer functions.
+    Your subject must contain the words:
+
+	calc mailing list subscription
+
+    You may have additional words in your subject line.
+
+    Your message body (not the subject) should consist of:
+
+	 subscribe calc-tester address
+	 end
+	 name your_full_name
+
+    where ``address'' is your EMail address and ``your_full_name'' is
+    your full name.
+
+    Feel free to follow the name line with additional EMail text as desired.
+
+=-=
+
+    Calc bug reports and calc bug fixes should be sent to:
+
+	calc-bugs at asthe dot com
+
+    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+    [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
+
+    Your subject must contain the words:
+
+	   calc bug report
+
+    You may have additional words in your subject line.
 
 =-=
 
@@ -128,7 +155,7 @@ Calc copyrights and exception files
 -----------------------------------
 
     With the exception of the files listed below, Calc is covered under
-    the following Copyrights:
+    the following GNU Lesser General Public License Copyrights:
 
 	Copyright (C) year  David I. Bell
 	Copyright (C) year  David I. Bell and Landon Curt Noll
@@ -137,13 +164,13 @@ Calc copyrights and exception files
 	Copyright (C) year  Landon Curt Noll
 	Copyright (C) year  Ernest Bowen and Landon Curt Noll
 	Copyright (C) year  Ernest Bowen
+	Copyright (C) year  Petteri Kettunen and Landon Curt Noll
 
-    A few files are not covered under the GNU Lesser General Public
-    License.  The source files not covered are:
+    These files are not covered under one of the Copyrights listed above:
 
-	    shs1.c	    shs1.h	shs.c		 shs.h
-	    md5.c	    md5.h	lib/qtime.cal	 COPYING
-	    COPYING-LGPL
+	    shs1.c	    shs1.h	 shs.c		shs.h
+	    md5.c	    md5.h	 COPYING	COPYING-LGPL
+	    cal/qtime.cal
 
     The file COPYING-LGPL, which contains a copy of the version 2.1
     GNU Lesser General Public License, is itself Copyrighted by the
@@ -155,6 +182,14 @@ Calc copyrights and exception files
     top of this file.  It is important to note that you may distribute
     verbatim copies of this file but you may not modify this file.
 
+    Some of these exception files are in the public domain.  Other
+    exception files have non-LGPL Copyrights.  Other files are under a
+    LGPL Copyright but have different authors.
+
+    In all cases one may use and distribute these exception files freely.
+    And because one may freely distribute the LGPL covered files, the
+    entire calc source may be freely used and distributed.
+
 =-=
 
 General Copyleft and License info

HOWTO.INSTALL

@@ -1,34 +1,130 @@
-Installing calc in 4 easy steps:
+Installing calc from the gziped tarball in 4 easy steps:
 
-    1) Look at the makefile, and adjust it to suit your needs.
+    0)  If your platform supports i686 RPMs, you may want to go to:
 
-       Here are some Makefile hints:
+	    http://www.isthe.com/chongo/src/calc/
 
-	   Select a compiler set by commenting in the appropriate set
-	   of cc options.  As shipped the Makefile assumes a gcc-like
-	   environment such as Linux.  If a more appropriate cc set if
-	   found below, comment out the Linux set and comment in that
-	   set or edit the gcc set or the common cc set as needed.
+	and use these RPMs:
 
-	   You may or may not need RANLIB when building libraries.
-	   As shipped the Makefile assumes RANLIB is needed.
-	   Comment the in/out the RANLIB value if ranlib does
-	   not work or does not exist.
+	    * calc*.i686.rpm
+		- all that is needed if you just want to use calc
 
-	   You may want to change the default pager used by calc.
-	   As shipped the Makefile assumes 'more'.  On your system
-	   you may find 'less' to be a better pager.
+	    * calc-devel-*.i686.rpm
+	        - calc *.h header and *.a lib files for use in other programs
 
-	   Set TOPDIR to be the place under which help files, calc,
-	   include files and calc libs are to be installed.  As shipped
-	   the Makefile assumes a TOPDIR of /usr/local/lib.
+	    * calc.*.src.rpm
+	        - calc source in RPM package form
 
-	   Set BINDIR to the place where calc is installed.  As shipped
-	   the Makefile assumes a BINDIR /usr/local/bin.
+	The following 4 steps apply to calc source tree that comes from either:
+
+		gunzip -c calc-*.tar.gz | tar -xvf -
+
+	or from:
+
+		rpm -ivh calc-*.src.rpm
+		cd /var/tmp
+		gunzip -c /usr/src/redhat/SOURCES/calc-*.tar.gz | tar -xvf -
+
+    1)	Look at the makefile, and adjust it to suit your needs.
+
+	The Makefile, as shipped, is suitable for installation under
+	Linux and Un*x-like environments.  For the most part, the default
+	values should work.  If in doubt, follow the 'When in doubt'
+	suggestion.
+
+	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+	! If you are building under Windoz or a Windoz-like environment !
+	! (such as Cygwin or DJGPP), read the README.WINDOWS file.      !
+	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+	You should determine if these Makefile variables are reasonable:
+
+	    INCDIR		Where the system include (.h) files are kept.
+	    BINDIR		Where to install calc binary files.
+	    LIBDIR		Where to install calc link library (*.a) files.
+	    CALC_SHAREDIR	Where to install calc help, .cal, startup, and
+	    			config files.
+
+	You may want to change the default installation locations for
+	these values, which are based on the 4 values listed above:
+
+	    HELPDIR            where the help directory is installed
+	    CALC_INCDIR        where the calc include files are installed
+	    CUSTOMCALDIR       where custom *.cal files are installed
+	    CUSTOMHELPDIR      where custom help files are installed
+	    CUSTOMINCPDIR      where custom .h files are installed
+	    SCRIPTDIR          where calc shell scripts are installed
+
+	If you want to install calc files under a top level directory,
+	then set the T value:
+
+	    The calc install is performed under $T, the calc build is
+	    performed under /.	The purpose for $T is to allow someone
+	    to install calc somewhere other than into the system area.
+
+	    For example, if:
+
+	    	BINDIR= /usr/bin
+		LIBDIR= /usr/lib
+		CALC_SHAREDIR= /usr/share/calc
+
+	    and if:
+
+	    	T= /var/tmp/testing
+
+	    Then the installation locations will be:
+
+		calc binary files:	/var/tmp/testing/usr/bin
+		calc link library:	/var/tmp/testing/usr/lib
+		calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+		... etc ...		/var/tmp/testing/...
+
+	    If $T is empty, calc is installed under /, which is the same
+	    top of tree for which it was built.  If $T is non-empty, then
+	    calc is installed under $T, as if one had to chroot under
+	    $T for calc to operate.
+
+	Look for the section that starts:
+
+	    ################
+	    # compiler set #
+	    ################
+
+	    Select a compiler set by commenting in the appropriate set
+	    of cc options.  As shipped the Makefile assumes a gcc-like
+	    environment such as Linux.  If a more appropriate cc set if
+	    found below, comment out the Linux set and comment in that
+	    set or edit the gcc set or the common cc set as needed.
+
+	You may want to change these Makrfile variables from their defaults:
+
+	    RANLIB
+
+		You may or may not need RANLIB when building libraries.
+		As shipped the Makefile assumes RANLIB is needed.
+		Comment the in/out the RANLIB value if ranlib does
+		not work or does not exist.
+
+	    CALCPAGER
+
+		You may want to change the default pager used by calc.
+		As shipped the Makefile assumes 'more'.  On your system
+		you may find 'less' to be a better pager.
+
+	    DEBUG
+
+	       Some compilers (to put it mildly) have bugs.  Sometimes the
+	       DEBUG Makefile variable causes the compiler / optimizer to
+	       produce bad code.  Other compilers do just fine.
+
+	       If possible try to use DEBUG=-O3 -g3 (maximum optimization
+	       and debug symbols).  If the calc test fails (see step 3),
+	       try lowering either the -O value and/or the -g3.  Also try
+	       using -Osomething without -g.
 
 	   Adjust other Makefile variables as needed.
 
-    2) build calc:
+    2)	build calc:
 
 	make all
 
@@ -36,13 +132,14 @@ Installing calc in 4 easy steps:
 	    you may find.  See the BUGS file if you find any compiler
 	    warning or errors.
 
-    3) test calc:
+    3)	test calc:
 
 	make check
 
-	==> If you run into problems, follow the BUGS file instructions.
+	==> If you run into problems, read the BUGS file and follow
+	    the instructions found in there.
 
-    4) install calc:
+    4)	install calc:
 
 	make install
 
@@ -65,12 +162,12 @@ the calc help subsystem.  See the README file for details.
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.1 $
-## @(#) $Id: HOWTO.INSTALL,v 29.1 1999/12/14 09:15:29 chongo Exp $
+## @(#) $Revision: 29.7 $
+## @(#) $Id: HOWTO.INSTALL,v 29.7 2003/04/15 03:38:34 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/HOWTO.INSTALL,v $
 ##
 ## Under source code control:	1999/09/27 20:48:44
 ## File existed as early as:	1999
 ##
-## chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-## Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+## chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+## Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/

LIBRARY

@@ -48,12 +48,30 @@ convenient for outside use.  So you should read the source for a routine
 to see if it really does what you think it does.  I won't guarantee that
 obscure internal routines won't change or disappear in future releases!
 
-When calc is installed, all of the include files needed to build
-libcalc.a along with the link library itself are installed into ${LIBDIR}.
+When calc is installed, all of libraries are installed into ${LIBDIR}.
+All of the calc header files are installed under ${INCDIRCALC}.
+
+If CALC_SRC is defined, then the calc header files will assume that
+they are in or under the current directory.  However, most external
+programs most likely will not be located under calc'c source tree.
+External programs most likely want to use the installed calc header
+files under ${INCDIRCALC}.  External programs most likely NOT want
+to define CALC_SRC.
 
 External programs may want to compile with:
 
-	-I${LIBDIR} -L${LIBDIR} -lcalc
+	-L${LIBDIR} -lcalc
+
+If custom functions are also used, they may want to compile with:
+
+	-L${LIBDIR} -lcalc -lcustcalc
+
+The CALC_SRC symbol should NOT be defined by default.  However if you are
+feeling pedantic you may want to force CALC_SRC to be undefined:
+
+	-UCALC_SRC
+
+as well.
 
 --------------
 ERROR HANDLING
@@ -471,12 +489,12 @@ need call libcalc_call_me_last() only once.
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.1 $
-## @(#) $Id: LIBRARY,v 29.1 1999/12/14 09:15:29 chongo Exp $
+## @(#) $Revision: 29.5 $
+## @(#) $Id: LIBRARY,v 29.5 2001/06/08 22:57:35 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/LIBRARY,v $
 ##
 ## Under source code control:	1993/07/30 19:44:49
 ## File existed as early as:	1993
 ##
-## chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-## Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+## chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+## Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/

README

@@ -4,7 +4,7 @@ See the HOWTO.INSTALL file for information on how to build and install calc.
 
 To be sure that your version of calc is up to date, check out:
 
-	http://reality.sgi.com/chongo/tech/comp/calc/calc-download.html
+	http://www.isthe.com/chongo/tech/comp/calc/calc-download.html
 
 We are interested in any/all feedback on recent versions of calc.
 In particular we would like to hear about:
@@ -73,11 +73,18 @@ for a wish/todo list.  Code contributions are welcome.
 
 =-=
 
-To join the calc-tester mailing list.  Send a request to:
+To join the calc-tester mailing list.  Send an EMail message to:
 
-    calc-tester-request at postofc dot corp dot sgi dot com
+    calc-tester-request at asthe dot com
 
-    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+    [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
+
+Your subject must contain the words:
+
+    calc mailing list subscription
+
+You may have additional words in your subject line.
 
 Your message body (not the subject) should consist of:
 
@@ -88,17 +95,28 @@ Your message body (not the subject) should consist of:
 where ``address'' is your EMail address and ``your_full_name'' is
 your full name.
 
-Calc bug reports, however should be sent to:
+Feel free to follow the name line with additional EMail text as desired.
 
-    calc-bugs at postofc dot corp dot sgi dot com
+=-=
 
-    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+Send Calc bug and bug fixes to:
+
+    calc-bugs at asthe dot com
+
+    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+    [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
 
 but see the BUGS file first.
 
+Your subject must contain the words:
+
+       calc bug report
+
+You may have additional words in your subject line.
+
 The calc web site is located at:
 
-	http://reality.sgi.com/chongo/tech/comp/calc/
+	http://www.isthe.com/chongo/tech/comp/calc/
 
 ## Copyright (C) 1999  Landon Curt Noll
 ##
@@ -116,12 +134,12 @@ The calc web site is located at:
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.1 $
-## @(#) $Id: README,v 29.1 1999/12/14 09:15:29 chongo Exp $
+## @(#) $Revision: 29.3 $
+## @(#) $Id: README,v 29.3 2001/06/01 11:26:53 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/RCS/README,v $
 ##
 ## Under source code control:	1995/10/25 05:27:59
 ## File existed as early as:	1995
 ##
-## chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-## Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+## chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+## Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/

README.WINDOWS

@@ -0,0 +1,166 @@
+Dear calc user on a Windoz based system,
+
+See the HOWTO.INSTALL file for information on how to build and install calc.
+See also the README file.
+
+NOTE: The main developers do not have access to a Windoz based platform.
+      While we will make an effort to not break calc Windoz based system,
+      our lack of a Windoz test environment will mean we will make mistakes
+      from time to time.  Hopefully Windowz users can overcome these mistakes.
+      Of course you are welcome to send us any patches that fix your
+      Windoz build environment.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+=-= compiling under DJGPP =-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+You might want to try using the DJGPP system to compile calc.  See:
+
+	http://www.delorie.com/djgpp/
+
+for DJGPP details and availability.
+
+To compile with DJGPP, one needs to select a number of Makefile
+variable changes.  Eli Zaretskii <eliz at is dot elta dot co dot il>
+recommends the following settings:
+
+	TERMCONTROL= -DUSE_TERMIOS
+	BYTE_ORDER= -DLITTLE_ENDIAN
+	LONG_BITS= 32
+	LONGLONG_BITS= 64
+	HAVE_FPOS_POS= -DHAVE_NO_FPOS_POS
+	FPOS_BITS= 32
+	OFF_T_BITS= 32
+	DEV_BITS= 32
+	INODE_BITS= 32
+	HAVE_USTAT= -DHAVE_NO_USTAT
+	HAVE_GETSID= -DHAVE_NO_GETSID
+	HAVE_GETPGID= -DHAVE_NO_GETPGID
+	HAVE_GETTIME= -DHAVE_NO_GETTIME
+	HAVE_GETPRID= -DHAVE_NO_GETPRID
+	HAVE_URANDOM_H= NO
+	ALIGN32= -UMUST_ALIGN32
+	HAVE_MALLOC_H= YES
+	HAVE_STDLIB_H= YES
+	HAVE_STRING_H= YES
+	HAVE_TIMES_H= NO
+	HAVE_SYS_TIMES_H= YES
+	HAVE_TIME_H= YES
+	HAVE_SYS_TIME_H= YES
+	HAVE_UNISTD_H= YES
+	BINDIR= /dev/env/DJDIR/bin
+	INCDIR= /dev/env/DJDIR/include
+	LIBDIR= /dev/env/DJDIR/lib
+	MANDIR= /dev/env/DJDIR/man/man1
+	CATDIR= /dev/env/DJDIR/man/cat1
+	NROFF= groff
+	CALCPATH= .;./cal;~/.cal;${CALC_SHAREDIR};${CUSTOMCALDIR}
+	CALCRC= ${CALC_SHAREDIR}/startup;~/.calcrc;./.calcinit
+	CALCPAGER= less.exe -ci
+	DEBUG= -O2 -gstabs+
+
+The 'Linux set' or 'gcc set' (see the Select your compiler type section)
+should work for DJGPP systems if you set the above Makefile variables.
+
+Look for Makefile comments of the form:
+
+	# Select ...something... for DJGPP.
+
+Follow those recommendations.  In cases where they conflict with
+the above Makefile list, follow the recommendation in the Makefile.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+=-= compiling with Cygwin =-=
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+An effort is being made to allow windows users to compile calc using the
+Cygwin project (http://sources.redhat.com/cygwin/) with the GCC compiler
+and Un*x tools for Windows.
+
+The major porting work was performed by Thomas Jones-Low
+(tjoneslo at softstart dot com).  He said:
+
+    I had previous stated to this group that I have successfully managed
+    to port a version of Calc to Windows, and promised some point to
+    post what was required, so here it is.
+
+    One obvious manner of doing this port is to get the latest version
+    of the Cygwin project (http://sources.redhat.com/cygwin/) with the
+    GCC compiler and Un*x tools for Windows and recompile.
+
+    I built my working version using Calc ... I am using Visual C++
+    version 7.0, which is an older version of the Microsoft development
+    tools. The make file provided with Calc is not compatible with
+    NMAKE, so I used the Visual Studio tools to generate another one
+    (not included). Calc is built in two parts, calc.dll, which is the
+    library, and calcexe.exe which is the command line interface.
+
+He recommends that you generate by hand all of the header files generated
+by the make file:
+
+    align32.h args.h calcerr.h conf.h endian_calc.h
+    fposval.h have_const.h have_fpos.h have_fpos_pos.h have_malloc.h
+    have_memmv.h have_newstr.h have_offscl.h have_posscl.h
+    have_stdlib.h have_string.h have_times.h have_uid_t.h
+    have_unistd.h longbits.h longlong.h terminal.h
+    have_ustat.h have_getsid.h have_getpgid.h
+    have_gettime.h have_getprid.h have_urandom.h have_rusage.h
+    have_strdup.h
+
+You will find generated versions of these files located in the win32
+sub-directory.  These files may be appropriate for your Cygwin building
+needs.  Just copy the win32/*.[ch] files up into the top level calc
+source directory, edited (if needed) and build using the Cygwin GCC
+compiler.
+
+People who maintain calc need to keep in mind the following:
+
+The following was added to opcodes.h, config.h, zmath.h and value.h:
+
+	#if defined(_WIN32)
+	#ifdef _EXPORTING
+	  #define DLL	__declspec(dllexport)
+	#else
+	  #define DLL	__declspec(dllimport)
+	#endif
+
+	#else /* Windoz free systems */
+
+	  #define DLL
+
+	#endif /* Windoz free systems */
+
+Then DLL was added in front of all the exported functions.  For example:
+
+    extern int configtype(char*);
+
+was changed to:
+
+    DLL extern int configtype(char*);
+
+
+## Copyright (C) 2002  Landon Curt Noll and Thomas Jones-Low
+##
+## Calc is open software; you can redistribute it and/or modify it under
+## the terms of the version 2.1 of the GNU Lesser General Public License
+## as published by the Free Software Foundation.
+##
+## Calc is distributed in the hope that it will be useful, but WITHOUT
+## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+## or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+## Public License for more details.
+##
+## A copy of version 2.1 of the GNU Lesser General Public License is
+## distributed with calc under the filename COPYING-LGPL.  You should have
+## received a copy with calc; if not, write to Free Software Foundation, Inc.
+## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+##
+## @(#) $Revision: 29.8 $
+## @(#) $Id: README.WINDOWS,v 29.8 2002/03/14 00:28:28 chongo Exp $
+## @(#) $Source: /usr/local/src/cmd/calc/RCS/README.WINDOWS,v $
+##
+## Under source code control:	2001/02/25 14:00:05
+## File existed as early as:	2001
+##
+## chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+## Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/

addop.c

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: addop.c,v 29.1 1999/12/14 09:15:29 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: addop.c,v 29.4 2004/02/23 07:25:16 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/addop.c,v $
  *
  * Under source code control:	1990/02/15 01:48:10
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 
@@ -44,7 +44,7 @@
 #define OPCODEALLOCSIZE 100	/* reallocate size for opcodes in functions */
 
 
-static long maxopcodes;		/* number of opcodes available */
+static unsigned long maxopcodes;/* number of opcodes available */
 static long newindex;		/* index of new function */
 static char *newname;		/* name of new function */
 static long oldop;		/* previous opcode */
@@ -185,7 +185,7 @@ endfunc(void)
 {
 	register FUNC *fp;		/* function just finished */
 	unsigned long size;		/* size of just created function */
-	long index;
+	unsigned long index;
 
 	if (oldop != OP_RETURN) {
 		addop(OP_UNDEF);
@@ -208,7 +208,7 @@ endfunc(void)
 	memcpy((char *) fp, (char *) curfunc, size);
 	if (curfunc != functemplate)
 		free(curfunc);
-	if (conf->traceflags & TRACE_FNCODES) {
+	if (newname[0] != '*' && (conf->traceflags & TRACE_FNCODES)) {
 		dumpnames = TRUE;
 		for (size = 0; size < fp->f_opcodecount; ) {
 			printf("%ld: ", (long)size);
@@ -302,7 +302,7 @@ void
 freefunc(FUNC *fp)
 {
 	long index;
-	long i;
+	unsigned long i;
 
 	if (fp == NULL)
 		return;
@@ -318,7 +318,7 @@ freefunc(FUNC *fp)
 			/*NOTREACHED*/
 		}
 	}
-	if (conf->traceflags & TRACE_FNCODES) {
+	if (newname[0] != '*' && (conf->traceflags & TRACE_FNCODES)) {
 		printf("Freeing function \"%s\"\n",namestr(&funcnames,index));
 		dumpnames = FALSE;
 		for (i = 0; i < fp->f_opcodecount; ) {
@@ -383,7 +383,7 @@ clearopt(void)
 FUNC *
 findfunc(long index)
 {
-	if ((unsigned long) index >= funccount) {
+	if (index >= funccount) {
 		math_error("Undefined function");
 		/*NOTREACHED*/
 	}

align32.c

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: align32.c,v 29.1 1999/12/14 09:15:29 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: align32.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/align32.c,v $
  *
  * Under source code control:	1995/11/23 05:18:06
  * File existed as early as:	1995
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

alloc.h

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: alloc.h,v 29.1 1999/12/14 09:15:29 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: alloc.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/alloc.h,v $
  *
  * Under source code control:	1990/02/15 01:48:29
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 
@@ -32,10 +32,17 @@
 #define __ALLOC_H__
 
 
-#include "have_malloc.h"
-#include "have_newstr.h"
-#include "have_string.h"
-#include "have_memmv.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "have_malloc.h"
+# include "have_newstr.h"
+# include "have_string.h"
+# include "have_memmv.h"
+#else
+# include <calc/have_malloc.h>
+# include <calc/have_newstr.h>
+# include <calc/have_string.h>
+# include <calc/have_memmv.h>
+#endif
 
 #ifdef HAVE_MALLOC_H
 # include <malloc.h>

assocfunc.c

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: assocfunc.c,v 29.1 1999/12/14 09:15:29 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: assocfunc.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/assocfunc.c,v $
  *
  * Under source code control:	1993/07/20 23:04:27
  * File existed as early as:	1993
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

blkcpy.c

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: blkcpy.c,v 29.1 1999/12/14 09:15:29 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: blkcpy.c,v 29.4 2004/02/23 07:47:31 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/blkcpy.c,v $
  *
  * Under source code control:	1997/04/18 20:41:26
  * File existed as early as:	1997
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 
@@ -287,13 +287,13 @@ copymat2mat(MATRIX *smat, long ssi, long num, MATRIX *dmat, long dsi)
 
 	if (num < 0)
 		num = smat->m_size - ssi;
-	if ((USB32) ssi + num > smat->m_size)
+	if (ssi + num > smat->m_size)
 		return E_COPY5;
 	if (num == 0)
 		return 0;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > dmat->m_size)
+	if (dsi + num > dmat->m_size)
 		return E_COPY7;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
 	if (vtemp == NULL) {
@@ -335,13 +335,13 @@ copyblk2mat(BLOCK *blk, long ssi, long num, MATRIX *dmat, long dsi)
 		return E_COPY2;
 	if (num < 0)
 		num = blk->datalen - ssi;
-	if ((USB32) ssi + num > blk->datalen)
+	if (ssi + num > blk->datalen)
 		return E_COPY5;
 	if (num == 0)
 		return 0;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > dmat->m_size)
+	if (dsi + num > dmat->m_size)
 		return E_COPY7;
 	op = blk->data + ssi;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
@@ -389,7 +389,7 @@ copymat2blk(MATRIX *smat, long ssi, long num, BLOCK *dblk, long dsi, BOOL norelo
 		num = smat->m_size - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > smat->m_size)
+	if (ssi + num > smat->m_size)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = dblk->datalen;
@@ -436,11 +436,11 @@ copymat2list(MATRIX *smat, long ssi, long num, LIST *lp, long dsi)
 		num = smat->m_size - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > smat->m_size)
+	if (ssi + num > smat->m_size)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > lp->l_count)
+	if (dsi + num > lp->l_count)
 		return E_COPY7;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
 	if (vtemp == NULL) {
@@ -484,11 +484,11 @@ copylist2mat(LIST *lp, long ssi, long num, MATRIX *dmat, long dsi)
 		num = lp->l_count - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > lp->l_count)
+	if (ssi + num > lp->l_count)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > dmat->m_size)
+	if (dsi + num > dmat->m_size)
 		return E_COPY7;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
 	if (vtemp == NULL) {
@@ -533,11 +533,11 @@ copylist2list(LIST *slp, long ssi, long num, LIST *dlp, long dsi)
 		num = slp->l_count - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > slp->l_count)
+	if (ssi + num > slp->l_count)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = 0;
-	if ((USB32) dsi + num > dlp->l_count)
+	if (dsi + num > dlp->l_count)
 		return E_COPY7;
 	vtemp = (VALUE *) malloc(num * sizeof(VALUE));
 	if (vtemp == NULL) {
@@ -572,7 +572,7 @@ copyblk2file(BLOCK *sblk, long ssi, long num, FILEID id, long dsi)
 {
 	FILEIO	*fiop;
 	FILE	*fp;
-	unsigned int	numw;
+	long	numw;
 
 	if (ssi > sblk->datalen)
 		return E_COPY2;
@@ -581,7 +581,7 @@ copyblk2file(BLOCK *sblk, long ssi, long num, FILEID id, long dsi)
 	if (num == 0)
 		return 0;
 
-	fiop = findid(id, 'w');
+	fiop = findid(id, TRUE);
 	if (fiop == NULL)
 		return E_COPYF1;
 	fp = fiop->fp;
@@ -609,7 +609,7 @@ copyfile2blk(FILEID id, long ssi, long num, BLOCK *dblk, long dsi, BOOL noreloc)
 {
 	FILEIO	*fiop;
 	FILE	*fp;
-	unsigned int	numw;
+	long	numw;
 	ZVALUE	fsize;
 	long	filelen;
 	long	newlen;
@@ -618,7 +618,7 @@ copyfile2blk(FILEID id, long ssi, long num, BLOCK *dblk, long dsi, BOOL noreloc)
 
 	if (id < 3)			/* excludes copying from stdin */
 		return E_COPYF1;
-	fiop = findid(id, 'r');
+	fiop = findid(id, FALSE);
 	if (fiop == NULL)
 		return E_COPYF1;
 
@@ -639,7 +639,7 @@ copyfile2blk(FILEID id, long ssi, long num, BLOCK *dblk, long dsi, BOOL noreloc)
 		num = filelen - ssi;
 	if (num == 0)
 		return 0;
-	if ((USB32) ssi + num > filelen)
+	if (ssi + num > filelen)
 		return E_COPY5;
 	if (fseek(fp, ssi, 0))		/* using system fseek  XXX */
 		return E_COPYF2;
@@ -677,7 +677,7 @@ copystr2file(STRING *str, long ssi, long num, FILEID id, long dsi)
 {
 	long len;
 	FILEIO *fiop;
-	unsigned int numw;
+	long numw;
 	FILE *fp;
 
 	len = str->s_len;
@@ -688,9 +688,9 @@ copystr2file(STRING *str, long ssi, long num, FILEID id, long dsi)
 		num = len - ssi;
 	if (num <= 0)			/* Nothing to be copied */
 		return 0;
-	if ((USB32) ssi + num > len)
+	if (ssi + num > len)
 		return E_COPY5;		/* Insufficient memory in str */
-	fiop = findid(id, 'w');
+	fiop = findid(id, TRUE);
 	if (fiop == NULL)
 		return E_COPYF1;
 	fp = fiop->fp;
@@ -726,7 +726,7 @@ copyblk2blk(BLOCK *sblk, long ssi, long num, BLOCK *dblk, long dsi, BOOL noreloc
 		num = sblk->datalen - ssi;
 	if (num == 0)			/* Nothing to be copied */
 		return 0;
-	if ((unsigned int) ssi + num > sblk->datalen)
+	if (ssi + num > sblk->datalen)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = dblk->datalen;
@@ -888,7 +888,7 @@ copyostr2blk(char *str,long ssi,long num,BLOCK *dblk,long dsi,BOOL noreloc)
 
 	if (ssi > len)
 		return E_COPY2;
-	if (num < 0 || (unsigned long) ssi + num > len)
+	if (num < 0 || ssi + num > len)
 		num = len - ssi;
 	if (num <= 0)			/* Nothing to be copied */
 		return 0;
@@ -991,7 +991,7 @@ copynum2blk(NUMBER *snum, long ssi, long num, BLOCK *dblk, long dsi, BOOL norelo
 		num = snum->num.len - ssi;
 	if (num == 0)			/* Nothing to be copied */
 		return 0;
-	if ((unsigned long) ssi + num > snum->num.len)
+	if (ssi + num > snum->num.len)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = dblk->datalen;
@@ -1044,7 +1044,7 @@ copyblk2num(BLOCK *sblk, long ssi, long num, NUMBER *dnum, long dsi, NUMBER **re
 		num = sblk->datalen - ssi;
 	if (num == 0)			/* Nothing to be copied */
 		return 0;
-	if ((unsigned long) ssi + num > sblk->datalen)
+	if (ssi + num > sblk->datalen)
 		return E_COPY5;
 	if (dsi < 0)
 		dsi = dnum->num.len;

blkcpy.h

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: blkcpy.h,v 29.1 1999/12/14 09:15:29 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: blkcpy.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/blkcpy.h,v $
  *
  * Under source code control:	1997/04/18 20:41:25
  * File existed as early as:	1997
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

block.c

@@ -19,15 +19,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: block.c,v 29.1 1999/12/14 09:15:29 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: block.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/block.c,v $
  *
  * Under source code control:	1997/02/27 00:29:40
  * File existed as early as:	1997
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

block.h

@@ -19,15 +19,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: block.h,v 29.1 1999/12/14 09:15:30 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: block.h,v 29.2 2000/06/07 14:02:13 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/block.h,v $
  *
  * Under source code control:	1997/02/21 05:03:39
  * File existed as early as:	1997
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

byteswap.c

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: byteswap.c,v 29.1 1999/12/14 09:15:30 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: byteswap.c,v 29.2 2000/06/07 14:02:13 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/byteswap.c,v $
  *
  * Under source code control:	1995/10/11 04:44:01
  * File existed as early as:	1995
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

byteswap.h

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: byteswap.h,v 29.1 1999/12/14 09:15:30 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: byteswap.h,v 29.4 2001/06/08 21:00:58 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/byteswap.h,v $
  *
  * Under source code control:	1995/10/11 04:44:01
  * File existed as early as:	1995
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 
@@ -33,7 +33,11 @@
 #define __BYTESWAP_H__
 
 
-#include "longbits.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "longbits.h"
+#else
+# include <calc/longbits.h>
+#endif
 
 
 /*

cal/Makefile

@@ -18,15 +18,15 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.1 $
-# @(#) $Id: Makefile,v 29.1 1999/12/14 09:15:30 chongo Exp $
+# @(#) $Revision: 29.15 $
+# @(#) $Id: Makefile,v 29.15 2003/01/05 08:10:56 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/Makefile,v $
 #
 # Under source code control:	1991/07/21 05:00:54
 # File existed as early as:	1991
 #
-# chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-# Share and enjoy!  :-) http://reality.sgi.com/chongo/tech/comp/calc/
+# chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+# Share and enjoy!  :-) http://www.isthe.com/chongo/tech/comp/calc/
 #
 # calculator by David I. Bell with help/mods from others
 # Makefile by Landon Curt Noll
@@ -36,15 +36,120 @@
 SHELL = /bin/sh
 MAKE_FILE = Makefile
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
-#
-# where to install things
-TOPDIR= /usr/local/lib
-#TOPDIR= /usr/lib
-#TOPDIR= /usr/libdata
+####
 
-LIBDIR= ${TOPDIR}/calc
+# Where the system include (.h) files are kept
+#
+# For DJGPP, select:
+#
+#	INCDIR= /dev/env/DJDIR/include
+#
+# If in doubt, set:
+#
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
+SCRIPTDIR= ${BINDIR}/cscript
+
+# T - top level directory under which calc will be installed
+#
+# The calc install is performed under $T, the calc build is
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
+#
+# If $T is empty, calc is installed under /, which is the same
+# top of tree for which it was built.  If $T is non-empty, then
+# calc is installed under $T, as if one had to chroot under
+# $T for calc to operate.
+#
+# If in doubt, use T=
+#
+T=
 
 # Makefile debug
 #
@@ -57,6 +162,7 @@ Q=@
 # standard tools
 #
 CHMOD= chmod
+CMP= cmp
 
 # The calc files to install
 #
@@ -69,8 +175,8 @@ CALC_FILES= README bigprime.cal deg.cal ellip.cal lucas.cal lucas_chk.cal \
 	test2700.cal test3100.cal test3300.cal test3400.cal prompt.cal \
 	test3500.cal seedrandom.cal test4000.cal test4100.cal test4600.cal \
 	beer.cal hello.cal test5100.cal test5200.cal randombitrun.cal \
-	randomrun.cal xx_print.cal natnumset.cal qtime.cal test8400.cal \
-	test8500.cal
+	randomrun.cal repeat.cal xx_print.cal natnumset.cal qtime.cal \
+	test8400.cal test8500.cal test8600.cal chi.cal intfile.cal
 
 # These files are found (but not built) in the distribution
 #
@@ -102,8 +208,10 @@ all: ${CALC_FILES} ${MAKE_FILE} .all
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q}for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo cal/$$i; \
+	    fi; \
 	done
 
 distdir:
@@ -116,34 +224,54 @@ calcliblist:
 	    fi; \
 	done
 
+##
+#
+# rpm rules
+#
+##
+
+echo_inst_files:
+	${Q}for i in ${CALC_FILES} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${CALC_SHAREDIR}/$$i; \
+	    fi; \
+	done
+
+##
+#
+# Utility rules
+#
+##
+
 clean:
 
 clobber:
 	rm -f .all
 
 install: all
-	-${Q}if [ ! -d ${TOPDIR} ]; then \
-		echo mkdir ${TOPDIR}; \
-		mkdir ${TOPDIR}; \
+	-${Q}if [ ! -d $T${CALC_SHAREDIR} ]; then \
+	    echo mkdir $T${CALC_SHAREDIR}; \
+	    mkdir $T${CALC_SHAREDIR}; \
+	    if [ ! -d "$T${CALC_SHAREDIR}" ]; then \
+		echo mkdir -p "$T${CALC_SHAREDIR}"; \
+		mkdir -p "$T${CALC_SHAREDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
+	    ${CHMOD} 0755 $T${CALC_SHAREDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${LIBDIR} ]; then \
-		echo mkdir ${LIBDIR}; \
-		mkdir ${LIBDIR}; \
-	else \
-	    true; \
-	fi
-	${Q}for i in ${CALC_FILES}; do \
-		echo rm -f ${LIBDIR}/$$i; \
-		rm -f ${LIBDIR}/$$i; \
-		echo cp $$i ${LIBDIR}; \
-		cp $$i ${LIBDIR}; \
-		echo ${CHMOD} 0444 ${LIBDIR}/$$i; \
-		${CHMOD} 0444 ${LIBDIR}/$$i; \
+	${Q}for i in ${CALC_FILES} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s $$i $T${CALC_SHAREDIR}/$$i; then \
+		true; \
+	    else \
+		rm -f $T${CALC_SHAREDIR}/$$i.new; \
+		cp -f $$i $T${CALC_SHAREDIR}/$$i.new; \
+		${CHMOD} 0444 $T${CALC_SHAREDIR}/$$i.new; \
+		mv -f $T${CALC_SHAREDIR}/$$i.new $T${CALC_SHAREDIR}/$$i; \
+		echo "installed $T${CALC_SHAREDIR}/$$i"; \
+	    fi; \
 	done
-	${Q}echo remove files that are obsolete
-	-rm -f nextprime.cal nextprim.cal
-	-rm -f test1000.cal test2000.cal ${LIBDIR}/test2000.cal
-	-rm -f ${LIBDIR}/nextprime.cal ${LIBDIR}/nextprim.cal
-	-rm -f ${LIBDIR}/test1000.cal ${LIBDIR}/cryrand.cal

cal/README

@@ -1,7 +1,7 @@
 Calc standard resource files
 ----------------------------
 
-To load a reosurce file, try:
+To load a resource file, try:
 
     read filename
 
@@ -37,9 +37,10 @@ be useful!
 
 If you write something that you think is useful, please send it to:
 
-    calc-tester at postofc dot corp dot sgi dot com
+    calc-contrib at asthe dot com
 
-    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+    [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
 
 By convention, a resource file only defines and/or initializes functions,
 objects and variables.	(The regress.cal and testxxx.cal regression test
@@ -58,12 +59,12 @@ files have already been read, the read -once will act as a noop.
 
 The "resource_debug" parameter is intended for controlling the possible
 display of special information relating to functions, objects, and
-other structures created by instructions in calc resoure files.
+other structures created by instructions in calc resource files.
 Zero value of config("resource_debug") means that no such information
 is displayed.  For other values, the non-zero bits which currently
 have meanings are as follows:
 
-    n	    Meaning of bit n of config("resource_debug")
+    n		Meaning of bit n of config("resource_debug")
 
     0	When a function is defined, redefined or undefined at
 	interactive level, a message saying what has been done
@@ -73,6 +74,12 @@ have meanings are as follows:
 	the reading of a file, a message saying what has been done
 	is displayed.
 
+    2	Show func will display more information about a functions
+	arguments as well as more argument sdummary information.
+
+    3	During execution, allow calc standard resource files
+	to output additional debugging information.
+
 The value for config("resource_debug") in both oldstd and newstd is 3,
 but if calc is invoked with the -d flag, its initial value is zero.
 Thus, if calc is started without the -d flag, until config("resource_debug")
@@ -96,6 +103,14 @@ either of the bottom 2 bits set:
 		print "funcB(size, mass, ...) defined";
 	}
 
+If your the resource file needs to output special debugging informatin,
+we recommend that you check for bit 3 of the config("resource_debug")
+before printing the debug statement:
+
+	if (config("resource_debug") & 8) {
+		print "DEBUG: This a sample debug statement";
+	}
+
 =-=
 
 The following is a brief description of some of the calc resource files
@@ -115,6 +130,10 @@ bernoulli.cal
 
     Calculate the nth Bernoulli number.
 
+    NOTE: There is now a bernoulli() builtin function.  This file is
+    	  left here for backward compatibility and now simply returns
+	  the buildin function.
+
 
 bigprime.cal
 
@@ -123,6 +142,24 @@ bigprime.cal
     A prime test, base a, on p*2^x+1 for even x>m.
 
 
+chi.cal
+
+    Z(x[, eps])
+    P(x[, eps])
+    chi_prob(chi_sq, v[, eps])
+
+    Computes the Probability, given the Null Hypothesis, that a given
+    Chi squared values >= chi_sq with v degrees of freedom.
+
+    The chi_prob() function does not work well with odd degrees of freedom.
+    It is reasonable with even degrees of freedom, although one must give
+    a sifficently small error term as the degress gets large (>100).
+
+    The Z(x) and P(x) are internal statistical funcions.
+
+    eps is an optional epsilon() like error term.
+
+
 chrem.cal
 
     chrem(r1,m1 [,r2,m2, ...])
@@ -158,6 +195,33 @@ hello.cal
 	http://www.latech.edu/~acm/helloworld/calc.html
 
 
+intfile.cal
+
+    file2be(filename)
+
+	Read filename and return an integer that is built from the
+	octets in that file in Big Endian order.  The first octets
+	of the file become the most significant bits of the integer.
+
+    file2le(filename)
+
+	Read filename and return an integer that is built from the
+	octets in that file in Little Endian order.  The first octets
+	of the file become the most significant bits of the integer.
+
+    be2file(v, filename)
+
+	Write the absolute value of v into filename in Big Endian order.
+	The v argument must be on integer.  The most significant bits
+	of the integer become the first octets of the file.
+
+    le2file(v, filename)
+
+	Write the absolute value of v into filename in Little Endian order.
+	The v argument must be on integer.  The least significant bits
+	of the integer become the last octets of the file.
+
+
 lucas.cal
 
     lucas(h, n)
@@ -273,7 +337,7 @@ pell.cal
     pell(D)
 
     Solve Pell's equation; Returns the solution X to: X^2 - D * Y^2 = 1.
-    Type the solution to pells equation for a particular D.
+    Type the solution to Pell's equation for a particular D.
 
 
 pi.cal
@@ -287,7 +351,7 @@ pi.cal
     The piforever() prints digits of pi, nicely formatted, for as long
     as your free memory space and system up time allows.
 
-    The piforever() funcion (written by Klaus Alexander Seistrup
+    The piforever() function (written by Klaus Alexander Seistrup
     <klaus@seistrup.dk>) was inspired by an algorithm conceived by
     Lambert Meertens.  See also the ABC Programmer's Handbook, by Geurts,
     Meertens & Pemberton, published by Prentice-Hall (UK) Ltd., 1990.
@@ -355,7 +419,7 @@ quat.cal
     quat_shift(a, b)
 
     Calculate using quaternions of the form: a + bi + cj + dk.	In these
-    functions, quaternians are manipulated in the form: s + v, where
+    functions, quaternions are manipulated in the form: s + v, where
     s is a scalar and v is a vector of size 3.
 
 
@@ -385,7 +449,7 @@ randombitrun.cal
     randombitrun([run_cnt])
 
     Using randombit(1) to generate a sequence of random bits, determine if
-    the number and kength of identical bits runs match what is expected.
+    the number and length of identical bits runs match what is expected.
     By default, run_cnt is to test the next 65536 random values.
 
     This tests the Blum-Blum-Shub generator.
@@ -416,6 +480,16 @@ randrun.cal
 
     This tests the a55 generator.
 
+repeat.cal
+
+    repeat(digit_set, repeat_count)
+
+    Return the value of the digit_set repeated repeat_count times.
+    Both digit_set and repeat_count must be integers > 0.
+
+    For example repeat(423,5) returns the value 423423423423423,
+    which is the digit_set 423 repeated 5 times.
+
 
 regress.cal
 
@@ -488,7 +562,7 @@ test1700.cal
 
     value
 
-    This resoure files is used by regress.cal to test the read and use keywords.
+    This resource files is used by regress.cal to test the read and use keywords.
 
 
 test2600.cal
@@ -513,7 +587,7 @@ test2600.cal
     checkresult(x, y, z, a)
     test2600(verbose, tnum)
 
-    This resoure files is used by regress.cal to test some of builtin functions
+    This resource files is used by regress.cal to test some of builtin functions
     in terms of accuracy and roundoff.
 
 
@@ -536,7 +610,7 @@ test2700.cal
     iscomsq(x)
     test2700(verbose, tnum)
 
-    This resoure files is used by regress.cal to test sqrt() for real and
+    This resource files is used by regress.cal to test sqrt() for real and
     complex values.
 
 
@@ -624,7 +698,7 @@ test4000.cal
     test4000(verbose, tnum) defined
 
     This resource file is used by regress.cal to test ptest, nextcand and
-    prevcand buildins.
+    prevcand builtins.
 
 test4100.cal
 
@@ -676,6 +750,35 @@ test5200.cal
     This resource file is used by regress.cal to test the fix of a
     global/static bug.
 
+test8400.cal
+
+    test8400() defined
+
+    This resource file is used by regress.cal to check for quit-based
+    memory leaks.
+
+test8500.cal
+
+    global err_8500
+    global L_8500
+    global ver_8500
+    global old_seed_8500
+    global cfg_8500
+    onetest_8500(a,b,rnd) defined
+    divmod_8500(N, M1, M2, testnum) defined
+
+    This resource file is used by regress.cal to the // and % operators.
+
+test8600.cal
+
+    global min_8600
+    global max_8600
+    global hash_8600
+    global hmean_8600
+
+    This resource file is used by regress.cal to test a change of
+    allowing up to 1024 args to be passed to a builtin function.
+
 unitfrac.cal
 
     unitfrac(x)
@@ -704,7 +807,7 @@ xx_print.cal
 
     Demo for the xx_print object routines.
 
-## Copyright (C) 1999  David I. Bell and Landon Curt Noll
+## Copyright (C) 2000  David I. Bell and Landon Curt Noll
 ##
 ## Primary author: Landon Curt Noll
 ##
@@ -722,12 +825,12 @@ xx_print.cal
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.1 $
-## @(#) $Id: README,v 29.1 1999/12/14 09:15:30 chongo Exp $
+## @(#) $Revision: 29.9 $
+## @(#) $Id: README,v 29.9 2003/01/05 08:10:56 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/README,v $
 ##
 ## Under source code control:	1990/02/15 01:50:32
 ## File existed as early as:	before 1990
 ##
-## chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-## Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+## chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+## Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/

cal/beer.cal

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: beer.cal,v 29.1 1999/12/14 09:15:30 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: beer.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/beer.cal,v $
  *
  * Under source code control:	1996/11/13 13:21:05
  * File existed as early as:	1996
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/bernoulli.cal

@@ -1,7 +1,7 @@
 /*
  * bernoulli - clculate the Nth Bernoulli number B(n)
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 2000  David I. Bell and Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,24 +17,28 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: bernoulli.cal,v 29.1 1999/12/14 09:15:30 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: bernoulli.cal,v 29.3 2000/12/17 12:26:04 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/bernoulli.cal,v $
  *
  * Under source code control:	1991/09/30 11:18:41
  * File existed as early as:	1991
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*
  * Calculate the Nth Bernoulli number B(n).
- * This uses the following symbolic formula to calculate B(n):
+ *
+ * NOTE: This is now a bulitin function.
+ *
+ * The non-buildin code used the following symbolic formula to calculate B(n):
  *
  *	(b+1)^(n+1) - b^(n+1) = 0
  *
  * where b is a dummy value, and each power b^i gets replaced by B(i).
  * For example, for n = 3:
+ *
  *	(b+1)^4 - b^4 = 0
  *	b^4 + 4*b^3 + 6*b^2 + 4*b + 1 - b^4 = 0
  *	4*b^3 + 6*b^2 + 4*b + 1 = 0
@@ -48,11 +52,14 @@
  */
 
 
+/*
 static Bnmax;
 static mat Bn[1001];
+*/
 
 define B(n)
 {
+/*
 	local	nn, np1, i, sum, mulval, divval, combval;
 
 	if (!isint(n) || (n < 0))
@@ -85,4 +92,6 @@ define B(n)
 	}
 	Bnmax = n;
 	return Bn[n];
+*/
+	return bernoulli(n);
 }

cal/bigprime.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: bigprime.cal,v 29.1 1999/12/14 09:15:30 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: bigprime.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/bigprime.cal,v $
  *
  * Under source code control:	1991/05/22 21:56:32
  * File existed as early as:	1991
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

cal/bindings

@@ -16,14 +16,14 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.1 $
-# @(#) $Id: bindings,v 29.1 1999/12/14 09:15:30 chongo Exp $
+# @(#) $Revision: 29.2 $
+# @(#) $Id: bindings,v 29.2 2000/06/07 14:02:25 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/bindings,v $
 #
 # Under source code control:	1993/05/02 20:09:19
 # File existed as early as:	1993
 #
-# Share and enjoy!  :-) http://reality.sgi.com/chongo/tech/comp/calc/
+# Share and enjoy!  :-) http://www.isthe.com/chongo/tech/comp/calc/
 
 # NOTE: This facility is ignored if calc was compiled with GNU-readline.
 #	In that case, the standard readline mechanisms (see readline(3))

cal/chi.cal

@@ -0,0 +1,251 @@
+/*
+ * chi - chi^2 probabilities with degrees of freedom for null hypothesis
+ *
+ * Copyright (C) 2001  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: chi.cal,v 29.2 2001/04/08 10:21:23 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/chi.cal,v $
+ *
+ * Under source code control:	2001/03/27 14:10:11
+ * File existed as early as:	2001
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+/*
+ * Z(x)
+ *
+ * From Handbook of Mathematical Functions
+ *	10th printing, Dec 1972 with corrections
+ *	National Bureau of Standards
+ *
+ * Section 26.2.1, p931.
+ */
+define Z(x, eps_term)
+{
+    local eps;		/* error term */
+
+    /* obtain the error term */
+    if (isnull(eps_term)) {
+    	eps = epsilon();
+    } else {
+	eps = eps_term;
+    }
+
+    /* compute Z(x) value */
+    return exp(-x*x/2, eps) / sqrt(2*pi(eps), eps);
+}
+
+
+/*
+ * P(x[, eps]) asymtotic P(x) expansion for x>0 to an given epsilon error term
+ *
+ * NOTE: If eps is omitted, the stored epsilon value is used.
+ *
+ * From Handbook of Mathematical Functions
+ *	10th printing, Dec 1972 with corrections
+ *	National Bureau of Standards
+ *
+ * 26.2.11, p932:
+ *
+ *	P(x) = 1/2 + Z(x) * sum(n=0; n < infinity){x^(2*n+1)/(1*3*5*...(2*n+1)};
+ *
+ * We continue the fraction until it is less than epsilon error term.
+ *
+ * Also note 26.2.5:
+ *
+ *	P(x) + Q(x) = 1
+ */
+define P(x, eps_term)
+{
+    local eps;		/* error term */
+    local s;		/* sum */
+    local x2;		/* x^2 */
+    local x_term;	/* x^(2*r+1) */
+    local odd_prod;	/* 1*3*5* ... */
+    local odd_term;	/* next odd value to multiply into odd_prod */
+    local term;		/* the recent term added to the sum */
+
+    /* obtain the error term */
+    if (isnull(eps_term)) {
+    	eps = epsilon();
+    } else {
+	eps = eps_term;
+    }
+
+    /* firewall */
+    if (x <= 0) {
+	if (x == 0) {
+	    return 0;	/* hack */
+	} else {
+	    quit "Q(x[,eps]) 1st argument must be >= 0";
+	}
+    }
+    if (eps <= 0) {
+	quit "Q(x[,eps]) 2nd argument must be > 0";
+    }
+
+    /*
+     * aproximate sum(n=0; n < infinity){x^(2*n+1)/(1*3*5*...(2*n+1)}
+     */
+    x2 = x*x;
+    x_term = x;
+    s = x_term;	/* 1st term */
+    odd_term = 1;
+    odd_prod = 1;
+    do {
+
+	/* compute the term */
+	odd_term += 2;
+	odd_prod *= odd_term;
+	x_term *= x2;
+	term = x_term / odd_prod;
+	s += term;
+
+    } while (term >= eps);
+
+    /* apply term and factor */
+    return 0.5 + Z(x,eps)*s;
+}
+
+
+/*
+ * chi_prob(chi_sq, v[, eps]) -  Prob of >= chi^2 with v degrees of freedom
+ *
+ *    Computes the Probability, given the Null Hypothesis, that a given
+ *    Chi squared values >= chi_sq with v degrees of freedom.
+ *
+ *    The chi_prob() function does not work well with odd degrees of freedom.
+ *    It is reasonable with even degrees of freedom, although one must give
+ *    a sifficently small error term as the degress gets large (>100).
+ *
+ * NOTE: This function does not work well with odd degrees of freedom.
+ *	 Can somebody help / find a bug / provide a better method of
+ *	 this odd degrees of freedom case?
+ *
+ * NOTE: This function works well with even degrees of freedom.  However
+ *	 when the even degrees gets large (say, as you approach 100), you
+ *	 need to increase your error term.
+ *
+ * From Handbook of Mathematical Functions
+ *	10th printing, Dec 1972 with corrections
+ *	National Bureau of Standards
+ *
+ * Section 26.4.4, p941:
+ *
+ *   For odd v:
+ *
+ *	Q(chi_sq, v) = 2*Q(chi) + 2*Z(chi) * (
+ *		     sum(r=1, r<=(r-1)/2) {(chi_sq^r/chi) / (1*3*5*...(2*r-1)});
+ *
+ *	chi = sqrt(chi_sq)
+ *
+ *	NOTE: Q(x) = 1-P(x)
+ *
+ * Section 26.4.5, p941.
+ *
+ *   For even v:
+ *
+ *	Q(chi_sq, v) = sqrt(2*pi()) * Z(chi) * ( 1 +
+ *		       sum(r=1, r=((v-2)/2)) { chi_sq^r / (2*4*...*(2r)) } );
+ *
+ *	chi = sqrt(chi_sq)
+ *
+ * Observe that:
+ *
+ *	Z(x) = exp(-x*x/2) / sqrt(2*pi());	(Section 26.2.1, p931)
+ *
+ * and thus:
+ *
+ *	sqrt(2*pi()) * Z(chi) =
+ *	sqrt(2*pi()) * Z(sqrt(chi_sq)) =
+ *	sqrt(2*pi()) * exp(-sqrt(chi_sq)*sqrt(chi_sq)/2) / sqrt(2*pi()) =
+ *	exp(-sqrt(chi_sq)*sqrt(chi_sq)/2) =
+ *	exp(-sqrt(-chi_sq/2)
+ *
+ * So:
+ *
+ *	Q(chi_sq, v) = exp(-sqrt(-chi_sq/2) * ( 1 + sum(....){...} );
+ */
+define chi_prob(chi_sq, v, eps_term)
+{
+    local eps;		/* error term */
+    local r;		/* index in finite sum */
+    local r_lim;	/* limit value for r */
+    local s;		/* sum */
+    local d;		/* demoninator (2*4*6*... or 1*3*5...) */
+    local chi_term;	/* chi_sq^r */
+    local ret;		/* return value */
+
+    /* obtain the error term */
+    if (isnull(eps_term)) {
+	eps = epsilon();
+    } else {
+	eps = eps_term;
+    }
+
+    /*
+     * odd degrees of freedom
+     */
+    if (isodd(v)) {
+
+	local chi;		/* sqrt(chi_sq) */
+
+	/* setup for sum */
+	s = 1;
+	d = 1;
+	chi = sqrt(abs(chi_sq), eps);
+	chi_term = chi;
+	r_lim = (v-1)/2;
+
+	/* compute sum(r=1, r=((v-1)/2)) {(chi_sq^r/chi) / (1*3*5...*(2r-1))} */
+	for (r=2; r <= r_lim; ++r) {
+	    chi_term *= chi_sq;
+	    d *= (2*r)-1;
+	    s += chi_term/d;
+	}
+
+	/* apply term and factor, Q(x) = 1-P(x) */
+	ret = 2*(1-P(chi)) + 2*Z(chi)*s;
+
+    /*
+     * even degrees of freedom
+     */
+    } else {
+
+	/* setup for sum */
+	s =1;
+	d = 1;
+	chi_term = 1;
+	r_lim = (v-2)/2;
+
+	/* compute sum(r=1, r=((v-2)/2)) { chi_sq^r / (2*4*...*(2r)) } */
+	for (r=1; r <= r_lim; ++r) {
+	    chi_term *= chi_sq;
+	    d *= r*2;
+	    s += chi_term/d;
+	}
+
+	/* apply factor - see observation in the main comment above */
+	ret = exp(-chi_sq/2, eps) * s;
+    }
+
+    return ret;
+}

cal/chrem.cal

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: chrem.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: chrem.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/chrem.cal,v $
  *
  * Under source code control:	1992/09/26 01:00:47
  * File existed as early as:	1992
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/deg.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: deg.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: deg.cal,v 29.4 2003/01/26 19:32:41 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/deg.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:33
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 
@@ -42,7 +42,7 @@ define dms(deg, min, sec)
 	ans.deg = deg;
 	ans.min = min;
 	ans.sec = sec;
-	fixdms(&ans);
+	fixdms(ans);
 	return ans;
 }
 
@@ -66,7 +66,7 @@ define dms_add(a, b)
 		ans.sec += b.sec;
 	} else
 		ans.deg += b;
-	fixdms(&ans);
+	fixdms(ans);
 	return ans;
 }
 
@@ -75,9 +75,9 @@ define dms_neg(a)
 {
 	local obj dms	ans;
 
-	ans.deg = -ans.deg;
-	ans.min = -ans.min;
-	ans.sec = -ans.sec;
+	ans.deg = -a.deg;
+	ans.min = -a.min;
+	ans.sec = -a.sec;
 	return ans;
 }
 
@@ -103,7 +103,7 @@ define dms_mul(a, b)
 		ans.min = b.min * a;
 		ans.sec = b.sec * a;
 	}
-	fixdms(&ans);
+	fixdms(ans);
 	return ans;
 }
 

cal/ellip.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: ellip.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: ellip.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/ellip.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:33
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/hello.cal

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: hello.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: hello.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/hello.cal,v $
  *
  * Under source code control:	1996/11/13 13:25:43
  * File existed as early as:	1996
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/intfile.cal

@@ -0,0 +1,222 @@
+/*
+ * intfile - integer to file and file to integer conversion
+ *
+ * Copyright (C) 2001  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.5 $
+ * @(#) $Id: intfile.cal,v 29.5 2001/04/10 22:09:34 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/intfile.cal,v $
+ *
+ * Under source code control:   2001/03/31 08:13:11
+ * File existed as early as:    2001
+ *
+ * chongo <was here> /\oo/\     http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)        http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+/*
+ * NOTE: Because leading HALF values are trimmed from integer, a file
+ *	 that begins with lots of 0 bits (in the case of big endian)
+ *	 or that ends with lots of 0 bits (in the case of little endian)
+ *	 will be changed when the subsequent integer is written back.
+ */
+
+
+/*
+ * file2be - convert a file into an big endian integer
+ *
+ * given:
+ *	filename	filename to read
+ *
+ * returns:
+ *	integer read from its contents on big endian order
+ */
+define file2be(filename)
+{
+    local fd;	/* open file */
+    local ret;	/* integer to return */
+    local c;	/* character read from the file */
+    local i;
+
+    /*
+     * open the file for reading
+     */
+    fd = fopen(filename, "rb");
+    if (!isfile(fd)) quit "file2be: cannot open file for reading";
+
+    /*
+     * read the contents of the file
+     *
+     * The first octets become the most significant bits of the integer.
+     */
+    ret = 0;
+    while (! isnull(c = fgetc(fd))) {
+	ret <<= 8;
+	ret += ord(c);
+    }
+
+    /*
+     * cleanup and return the integer
+     */
+    fclose(fd);
+    return ret;
+}
+
+
+/*
+ * file2le - convert a file into an little endian integer
+ *
+ * given:
+ *	filename	filename to read
+ *
+ * returns:
+ *	integer read from its contents on little endian order
+ */
+define file2le(filename)
+{
+    local fd;	/* open file */
+    local ret;	/* integer to return */
+    local c;	/* character read from the file */
+    local shft;	/* bit shift for the c value */
+    local i;
+
+    /*
+     * open the file for reading
+     */
+    fd = fopen(filename, "rb");
+    if (!isfile(fd)) quit "file2le: cannot open file for reading";
+
+    /*
+     * read the contents of the file into a string
+     *
+     * The first octets become are the least significant bits of the integer.
+     */
+    ret = 0;
+    shft = 0;
+    while (! isnull(c = fgetc(fd))) {
+	ret |= (ord(c) << shft);
+	shft += 8;
+    }
+
+    /*
+     * cleanup and return the integer
+     */
+    fclose(fd);
+    return ret;
+}
+
+
+/*
+ * be2file - convert a big endian integer into a file
+ *
+ * given:
+ *	v		integer to write to the file
+ *	filename	filename to write
+ *
+ * returns:
+ *	The number of octets written to the file.
+ *
+ * NOTE: The absolute value of the integer is written to the file.
+ */
+define be2file(v, filename)
+{
+    local fd;		/* open file */
+    local octlen;	/* length of v in octets */
+    local i;
+
+    /*
+     * firewall
+     */
+    if (!isint(v)) {
+	quit "be2file: 1st arg not an integer";
+    }
+    v = abs(v);
+
+    /*
+     * open the file for writing
+     */
+    fd = fopen(filename, "wb");
+    if (!isfile(fd)) quit "be2file: cannot open file for writing";
+
+    /*
+     * write the octets to the file
+     *
+     * The most significant bits of the integer become the first file octets.
+     */
+    octlen = int((highbit(v)+8) / 8);
+    for (i=octlen-1; i >= 0; --i) {
+    	fputc(fd, char(v >> (i*8)));
+    }
+
+    /*
+     * cleanup
+     */
+    fclose(fd);
+    return octlen;
+}
+
+
+/*
+ * le2file - convert a little endian integer into a file
+ *
+ * given:
+ *	v		integer to write to the file
+ *	filename	filename to write
+ *
+ * returns:
+ *	The number of octets written to the file.
+ *
+ * NOTE: The absolute value of the integer is written to the file.
+ */
+define le2file(v, filename)
+{
+    local fd;	/* open file */
+    local cnt;	/* octets written */
+
+    /*
+     * firewall
+     */
+    if (!isint(v)) {
+	quit "be2file: 1st arg not an integer";
+    }
+    v = abs(v);
+
+    /*
+     * open the file for writing
+     */
+    fd = fopen(filename, "wb");
+    if (!isfile(fd)) quit "le2file: cannot open file for writing";
+
+    /*
+     * Write the octets to the file.
+     *
+     * The least significant bits of the integer become the first file octets.
+     */
+    cnt = 0;
+    while (v > 0) {
+	fputc(fd, char(v));
+	v >>= 8;
+	++cnt;
+    }
+
+    /*
+     * cleanup
+     */
+    fclose(fd);
+    return cnt;
+}

cal/lucas.cal

@@ -17,15 +17,25 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: lucas.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: lucas.cal,v 29.6 2002/07/10 09:43:46 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/lucas.cal,v $
  *
  * Under source code control:	1990/05/03 16:49:51
  * File existed as early as:	1990
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+/*
+ * NOTE: This is a standard calc resource file.  For information on calc see:
+ *
+ *	http://www.isthe.com/chongo/tech/comp/calc/index.html
+ *
+ * To obtain your own copy of calc, see:
+ *
+ *	http://www.isthe.com/chongo/tech/comp/calc/calc-download.html
  */
 
 /*
@@ -52,12 +62,19 @@
  *
  * At the time of discovery, this was the largest known twin prime pair.
  *
+ * See:
+ *
+ *	http://www.isthe.com/chongo/tech/math/prime/amdahl6.html
+ *
+ * for more information on the Amdahl 6 group.
+ *
  * NOTE: Both largest known and largest known twin prime records have been
  *	 broken.  Rather than update this file each time, I'll just
  *	 congratulate the finders and encourage others to try for
  *	 larger finds.	Records were made to be broken afterall!
- *
- * ON GAINING A WORLD RECORD:
+ */
+
+/* ON GAINING A WORLD RECORD:
  *
  * The routines in calc were designed to be portable, and to work on
  * numbers of 'sane' size.  The Amdahl 6 team used a 'ultra-high speed
@@ -73,7 +90,7 @@
  *
  *	test numbers of the form h*2^n-1
  *	fix a value of n and vary the value h
- *	n mod 128 == 0
+ *	n mod 2^x == 0  for some value of x, say > 7 or more
  *	h*2^n-1 is not divisible by any small prime < 2^40
  *	0 < h < 2^39
  *	h*2^n+1 is not divisible by any small prime < 2^40
@@ -1030,7 +1047,7 @@ gen_v1(h, n)
 define
 ldebug(funct, str)
 {
-	if (config("resource_debug") & 3) {
+	if (config("resource_debug") & 8) {
 		print "DEBUG:", funct:":", str;
 	}
 	return;

cal/lucas_chk.cal

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: lucas_chk.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: lucas_chk.cal,v 29.3 2001/03/31 13:31:34 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/lucas_chk.cal,v $
  *
  * Under source code control:	1991/01/11 05:41:43
  * File existed as early as:	1991
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*
@@ -336,7 +336,7 @@ lucas_chk(high_n, quiet)
 
 		/* skip primes where h>=2^n */
 		if (highbit(h_p[i]) >= n_p[i]) {
-			if (config("resource_debug") & 3) {
+			if (config("resource_debug") & 8) {
 				print "h>=2^n skip:", h_p[i]:"*2^":n_p[i]:"-1";
 			}
 			continue;

cal/lucas_tbl.cal

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: lucas_tbl.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: lucas_tbl.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/lucas_tbl.cal,v $
  *
  * Under source code control:	1991/01/26 02:43:43
  * File existed as early as:	1991
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/mersenne.cal

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: mersenne.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: mersenne.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/mersenne.cal,v $
  *
  * Under source code control:	1991/05/22 21:56:36
  * File existed as early as:	1991
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/mfactor.cal

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: mfactor.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: mfactor.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/mfactor.cal,v $
  *
  * Under source code control:	1996/07/06 06:09:40
  * File existed as early as:	1996
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/mod.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: mod.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: mod.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/mod.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:34
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

cal/natnumset.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: natnumset.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: natnumset.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/natnumset.cal,v $
  *
  * Under source code control:	1997/09/07 23:53:51
  * File existed as early as:	1997
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/pell.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: pell.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: pell.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/pell.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:34
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/pi.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: pi.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: pi.cal,v 29.4 2004/02/23 13:06:31 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/pi.cal,v $
  *
  * Under source code control:	1991/05/22 21:56:37
  * File existed as early as:	1991
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*
@@ -61,7 +61,7 @@ define qpi(epsilon)
 	yn = sqrt2 - 1;
 	an = 6 - 4 * sqrt2;
 	tn = 2;
-	for (count = 0; count < niter; count++) {
+	for (count = 0; count < niter; ++count) {
 		ym = yn;
 		am = an;
 		tn *= 4;
@@ -104,7 +104,7 @@ define piforever()
 		* Next approximation
 		*/
 		p = k * k;
-		q = k + k++;
+		q = k + ++k;
 
 		a2 = a;
 		b2 = b;

cal/pix.cal

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: pix.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: pix.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/pix.cal,v $
  *
  * Under source code control:	1996/07/09 03:14:14
  * File existed as early as:	1996
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/pollard.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: pollard.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: pollard.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/pollard.cal,v $
  *
  * Under source code control:	1991/05/22 21:56:37
  * File existed as early as:	1991
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

cal/poly.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: poly.cal,v 29.1 1999/12/14 09:15:31 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: poly.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/poly.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:35
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/prompt.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: prompt.cal,v 29.1 1999/12/14 09:15:32 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: prompt.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/prompt.cal,v $
  *
  * Under source code control:	1995/12/18 04:43:25
  * File existed as early as:	1995
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/psqrt.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: psqrt.cal,v 29.1 1999/12/14 09:15:32 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: psqrt.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/psqrt.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:35
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/qtime.cal

@@ -1,24 +1,46 @@
 /*
  * qtime - Display time as English sentence
  *
+ * Copyright (C) 1999  Klaus Alexander Seistrup and Landon Curt Noll
+ *
+ * Written by: Klaus Alexander Seistrup <kseis@magnetic-ink.dk>
+ * With mods by: Landon Curt Noll <http://www.isthe.com/chongo/>
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: qtime.cal,v 29.4 2000/12/18 10:18:40 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/qtime.cal,v $
+ *
+ * Under source code control:	1999/10/13 04:10:33
+ * File existed as early as:	1999
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+/*
  * usage:
  *	qtime(utc_hr_offset)
  *
  *	utc_hr_offset	Offset from UTC in hours.
  *
- * Written by: Klaus Alexander Seistrup <kseis@magnetic-ink.dk>
- * With minor mods by: Landon Curt Noll <http://reality.sgi.com/chongo/>
- *
  * See:
  *	http://www.magnetic-ink.dk/download/qtime.html
  *
  * for examples of qtime() written on other languages.
- *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: qtime.cal,v 29.1 1999/12/14 09:15:32 chongo Exp $
- * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/qtime.cal,v $
- *
- * This file is not covered under version 2.1 of the GNU LGPL.
  */
 
 

cal/quat.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: quat.cal,v 29.1 1999/12/14 09:15:32 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: quat.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/quat.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:35
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/randbitrun.cal

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: randbitrun.cal,v 29.1 1999/12/14 09:15:32 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: randbitrun.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/randbitrun.cal,v $
  *
  * Under source code control:	1995/02/13 03:43:11
  * File existed as early as:	1995
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/randmprime.cal

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: randmprime.cal,v 29.1 1999/12/14 09:15:32 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: randmprime.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/randmprime.cal,v $
  *
  * Under source code control:	1994/03/14 23:11:21
  * File existed as early as:	1994
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

cal/randombitrun.cal

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: randombitrun.cal,v 29.1 1999/12/14 09:15:32 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: randombitrun.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/randombitrun.cal,v $
  *
  * Under source code control:	1995/02/13 03:43:11
  * File existed as early as:	1995
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/randomrun.cal

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: randomrun.cal,v 29.1 1999/12/14 09:15:32 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: randomrun.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/randomrun.cal,v $
  *
  * Under source code control:	1997/02/19 03:35:59
  * File existed as early as:	1997
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/randrun.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: randrun.cal,v 29.1 1999/12/14 09:15:32 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: randrun.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/randrun.cal,v $
  *
  * Under source code control:	1995/02/12 20:00:06
  * File existed as early as:	1995
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/regress.cal

@@ -1,7 +1,7 @@
 /*
  * regress - calc regression and correctness test suite
  *
- * Copyright (C) 1999  David I. Bell
+ * Copyright (C) 1999-2003  David I. Bell and Landon Curt Noll
  *
  * Calc is open software; you can redistribute it and/or modify it under
  * the terms of the version 2.1 of the GNU Lesser General Public License
@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: regress.cal,v 29.1 1999/12/14 09:15:32 chongo Exp $
+ * @(#) $Revision: 29.18 $
+ * @(#) $Id: regress.cal,v 29.18 2004/02/23 05:58:45 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/regress.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:36
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*
@@ -52,7 +52,8 @@ errmax(-1),;				/* prevent errcount from abouting */
 global ecnt;				/* expected value of errcount() */
 ecnt = 0;				/* clear expected errcount() value */
 
-initcfg = config("all", "oldstd");	/* set config to startup default */
+initcfg = config("all", "newstd");	/* set config to startup default */
+defcfg = config("all");			/* capture the default config */
 config("resource_debug", 0),;		/* disable resource startup messages */
 config("calc_debug", 0),;		/* disable internal debugging */
 config("verbose_quit", 0),;		/* disable quit messages */
@@ -380,19 +381,19 @@ define test_config()
 	/* check the set and return of all config */
 	callcfg = config("all");
 	print				'501: callcfg = config("all")';
+	vrfy(callcfg == startcfg,	'502: callcfg == startcfg');
+
 	callcfg = config("all", "oldstd");
-	print				'502: callcfg = config("all","oldstd")';
-	oldcfg = config("all", "newstd");
-	print				'503: oldcfg = config("all","newstd")';
+	print				'503: callcfg = config("all","oldstd")';
 	vrfy(callcfg == startcfg,	'504: callcfg == startcfg');
-	newcfg = config("all");
-	print				'505: newcfg = config("all")';
-	vrfy(config("all") == newcfg,	'506: config("all") == newcfg');
-	vrfy(config("all", oldcfg) == newcfg,
-					'507: config("all", oldcfg) == newcfg');
+	oldcfg = config("all");
+	print				'505: oldcfg = config("all");';
+	vrfy(config("all") == oldcfg,	'506: config("all") == oldcfg');
+	vrfy(oldcfg==config("all","newstd"),
+					'507: oldcfg==config("all","newstd")');
+	vrfy(defcfg == config("all"),	'508: defcfg == config("all")');
 
 	/* vrfy the state of the default config */
-	vrfy(config("all") == oldcfg,	'508: config("all") == oldcfg');
 	vrfy(config("mode") == "real",
 					'509: config("mode") == "real"');
 	vrfy(config("display") == 20,
@@ -411,10 +412,10 @@ define test_config()
 					'516: config("pow2") == 40');
 	vrfy(config("redc2") == 50,
 					'517: config("redc2") == 50');
-	vrfy(config("tilde") == "true",
-					'518: config("tilde") == "true"');
-	vrfy(config("tab") == "true",
-					'519: config("tab") == "true"');
+	vrfy(config("tilde"),
+					'518: config("tilde")');
+	vrfy(config("tab"),
+					'519: config("tab")');
 	vrfy(config("quomod") == 0,
 					'520: config("quomod") == 0');
 	vrfy(config("quo") == 2,
@@ -429,58 +430,59 @@ define test_config()
 					'525: config("cfappr") == 0');
 	vrfy(config("cfsim") == 8,
 					'526: config("cfsim") == 8');
-	vrfy(config("outround") == 2,
-					'527: config("outround") == 2');
+	vrfy(config("outround") == 24,
+					'527: config("outround") == 24');
 	vrfy(config("round") == 24,
 					'528: config("round") == 24');
-	vrfy(config("leadzero") == "false",
-					'529: config("leadzero") == "false"');
-	vrfy(config("fullzero") == "false",
-					'530: config("fullzero") == "false"');
+	vrfy(config("leadzero") == 1,
+					'529: config("leadzero") == 1');
+	vrfy(config("fullzero") == 0,
+					'530: config("fullzero") == 0');
 	vrfy(config("maxscan") == 20,
 					'531: config("maxscan") == 20');
-	vrfy(config("prompt") == "> ",
-					'532: config("prompt") == "> "');
-	vrfy(config("more") == ">> ",
-					'533: config("more") == ">> "');
+	vrfy(config("prompt") == "; ",
+					'532: config("prompt") == "; "');
+	vrfy(config("more") == ";; ",
+					'533: config("more") == ";; "');
 
-	/* convert to "newstd" config by individual changes */
-	vrfy(config("display", 10) == 20,
-					'534: config("display") == 20');
-	vrfy(config("epsilon",1e-10)==1e-20,
-					'535: config("epsilon",1e-10)==1e-20');
-	vrfy(config("quo", 0) == 2,	'536: config("quo", 0) == 2');
-	vrfy(config("outround", 24) == 2,
-					'537: config("outround", 24) == 2');
-	vrfy(config("leadzero","y") == "false",
-				'538: config("leadzero","y") == "false"');
-	vrfy(config("fullzero", 1) == "false",
-				'539: config("fullzero", 1) == "false"');
-	vrfy(config("prompt", "; ") == "> ",
-					'540: config("prompt", "; ") == "> "');
-	vrfy(config("more", ";; ") == ">> ",
-					'541: config("more", ";; ") == ">> "');
-	vrfy(config("all") == newcfg,	'542: config("all") == newcfg');
+	/* convert to "oldstd" config by individual changes */
+	print				'534: test unused';
+	vrfy(config("outround", 2) == 24,
+					'535: config("outround", 2) == 24');
+	vrfy(config("leadzero","n") == 1,
+					'536: config("leadzero","n") == 1');
+	print				'537: test unused';
+	vrfy(config("prompt", "> ") == "; ",
+					'538: config("prompt", "> ") == "; "');
+	vrfy(config("more", ">> ") == ";; ",
+					'539: config("more", ">> ") == ";; "');
+	vrfy(config("all") == oldcfg,	'540: config("all") == oldcfg');
 
-	/* check on the new config("fullzero") effect */
-	vrfy(config("all","oldstd") == newcfg,
-					'543: config("all",callcfg) == newcfg');
+	/* restore the configation at the start of this function */
+	vrfy(config("all",callcfg) == oldcfg,
+					'541: config("all",callcfg) == oldcfg');
+
+	/* display and fullzero tests */
 	vrfy(config("display",2) == 20,
-					'544: config("display",2) == 20');
-	vrfy(config("fullzero",1) == "false",
-					'545: config("fullzero",1) == "false"');
+					'542: config("display",2) == 20');
+	vrfy(config("leadzero",0) == 1,
+					'543: config("leadzero",0) == 1');
+	vrfy(config("fullzero",1) == 0,
+					'544: config("fullzero",1) == 0');
 	vrfy(strprintf("%d %d %d", 0, 1, 2) == ".00 1.00 2.00",
-		'546: strprintf("%d %d %d", 0, 1, 2) == ".00 1.00 2.00"');
+		'545: strprintf("%d %d %d", 0, 1, 2) == ".00 1.00 2.00"');
 	vrfy(config("display",20) == 2,
-					'547: config("display",20) == 2');
-	vrfy(config("fullzero",0) == "true",
-					'548: config("fullzero",0) == "true"');
+					'546: config("display",20) == 2');
+	vrfy(config("leadzero",1) == 0,
+					'547: config("leadzero",1) == 0');
+	vrfy(config("fullzero",0) == 1,
+					'548: config("fullzero",0) == 1');
 	vrfy(strprintf("%d %d %d", 0, 1, 2) == "0 1 2",
 		'549: strprintf("%d %d %d", 0, 1, 2) == "0 1 2"');
 
 	/* restore calling config */
-	vrfy(config("all",callcfg) == oldcfg,
-					'550: config("all",callcfg) == oldcfg');
+	vrfy(config("all",callcfg) == startcfg,
+		'550: config("all",callcfg) == startcfg');
 	vrfy(config("all") == callcfg,	'551: config("all") == callcfg');
 	vrfy(config("all") == startcfg, '552: config("all") == startcfg');
 
@@ -492,7 +494,11 @@ define test_config()
 	vrfy(strlen(config("version")) > 0,
 					'555: strlen(config("version")) > 0');
 
-	print '556: Ending test_config';
+	/* mode2 is off by default */
+	vrfy(config("mode2") == "off",
+					'556: config("mode2") == "off"');
+
+	print '557: Ending test_config';
 }
 print '010: parsed test_config()';
 
@@ -996,8 +1002,13 @@ define test_functions()
 	vrfy(strpos(a, "abc") == 1,	'946: strpos(a, "abc") == 1');
 	vrfy(strpos(a, "xyz") == 0,	'947: strpos(a, "xyz") == 0');
 	vrfy(strpos(a, a) == 1,		'948: strpos(a, a) == 1');
-	vrfy(system("") == 0,		'949: system("") == 0');
-	vrfy(system("true") == 0,	'950: system("true") == 0');
+	if (config("windows") || config("cygwin")) {
+	    print '949: test skipped for windows or cygwin systems';
+	    print '950: test skipped for windows or cygwin systems';
+	} else {
+	    vrfy(system("") == 0,		'949: system("") == 0');
+	    vrfy(system("true") == 0,		'950: system("true") == 0');
+	}
 	print		'951: test disabled due to stdin dependency';
 	print				'952: test removed';
 	print				'953: test removed';
@@ -1223,7 +1234,85 @@ define test_functions()
 	vrfy(hnrmod(21<<500+7,3,500,-1) == (21<<500+7)%(3<<500-1),
 		'1112: hnrmod(21<<500+7,3,500,-1) == (21<<500+7)%(3<<500-1)');
 
-	print '1113: Ending test_functions';
+	/*
+	 * catalan testing
+	 */
+	vrfy(catalan(2) == 2,		'1113: catalan(2) == 2');
+	vrfy(catalan(3) == 5,		'1114: catalan(3) == 5');
+	vrfy(catalan(4) == 14,		'1115: catalan(4) == 14');
+	vrfy(catalan(20) == 6564120420,	'1116: catalan(20) == 6564120420');
+
+	/*
+	 * bernoulli builtin function testing
+	 */
+	vrfy(bernoulli(0) == 1,		'1117: bernoulli(0) == 1');
+	vrfy(bernoulli(1) == -1/2,	'1118: bernoulli(1) == -1/2');
+	vrfy(bernoulli(2) == 1/6,	'1119: bernoulli(2) == 1/6');
+	vrfy(bernoulli(3) == 0,		'1120: bernoulli(3) == 0');
+	vrfy(bernoulli(4) == -1/30,	'1121: bernoulli(4) == -1/30');
+	vrfy(bernoulli(5) == 0,		'1122: bernoulli(5) == 0');
+	vrfy(bernoulli(6) == 1/42,	'1123: bernoulli(6) == 1/42');
+	vrfy(bernoulli(32) == -7709321041217/510,
+		    '1124: bernoulli(32) == -7709321041217/510');
+
+	/*
+	 * euler function testing
+	 */
+	vrfy(euler(0) == 1,		'1125: euler(0) == 1');
+	vrfy(euler(1) == 0,		'1126: euler(1) == 0');
+	vrfy(euler(2) == -1,		'1127: euler(2) == -1');
+	vrfy(euler(3) == 0,		'1128: euler(3) == 0');
+	vrfy(freeeuler() == null(),	'1129: freeeuler() == null()');
+	vrfy(euler(4) == 5,		'1130: euler(4) == 5');
+	vrfy(euler(5) == 0,		'1131: euler(5) == 0');
+	vrfy(euler(6) == -61,		'1132: euler(6) == -61');
+	vrfy(euler(32) == 177519391579539289436664789665,
+		    '1130: euler(32) == 177519391579539289436664789665');
+	vrfy(freeeuler() == null(),	'1133: freeeuler() == null()');
+
+	/*
+	 * digit with non-10 base
+	 */
+        a = 123456.789;
+	print				'1134: a = 123456.789';
+	vrfy(digit(a, 6, 100) == 0,	'1135: digit(a, 6, 100) == 0');
+	vrfy(digit(a, 5, 100) == 0,	'1136: digit(a, 5, 100) == 0');
+	vrfy(digit(a, 4, 100) == 0,	'1137: digit(a, 4, 100) == 0');
+	vrfy(digit(a, 3, 100) == 0,	'1138: digit(a, 3, 100) == 0');
+	vrfy(digit(a, 2, 100) == 12,	'1139: digit(a, 2, 100) == 12');
+	vrfy(digit(a, 1, 100) == 34,	'1140: digit(a, 1, 100) == 34');
+	vrfy(digit(a, 0, 100) == 56,	'1141: digit(a, 0, 100) == 56');
+	vrfy(digit(a, -1, 100) == 78,	'1142: digit(a, -1, 100) == 78');
+	vrfy(digit(a, -2, 100) == 90,	'1143: digit(a, -2, 100) == 90');
+	vrfy(digit(a, -3, 100) == 0,	'1144: digit(a, -3, 100) == 0');
+	vrfy(digit(a, -4, 100) == 0,	'1145: digit(a, -4, 100) == 0');
+	vrfy(digit(a, -5, 100) == 0,	'1146: digit(a, -5, 100) == 0');
+	vrfy(digit(a, -6, 100) == 0,	'1146: digit(a, -6, 100) == 0');
+
+	/*
+	 * digits with a non-10 base
+	 */
+	vrfy(digits(a, 100) == 3,	'1147: digits(a, 100) == 3');
+	vrfy(digits(2^256-1, 256) == 32,'1148: digits(2^256-1, 256) == 32');
+
+	/*
+	 * places with a non-10 base
+	 */
+	vrfy(places(0.0123, 2) == -1,	'1149: places(0.0123, 2) == -1');
+	vrfy(places(0.625, 2) == 3,	'1150: places(0.625, 2) == 3');
+	vrfy(places(0.625, 8) == 1,	'1151: places(0.625, 8) == 1');
+	vrfy(places(171/2^712, 2) == 712,
+				'1152: places(171/2^7120.625, 2) == 712');
+	vrfy(places(171/2^712, 64) == 119,
+				'1152: places(171/2^7120.625, 64) == 119');
+
+	/*
+	 * verify sleep
+	 */
+	vrfy(sleep(1/5) == null(),	'1153: sleep(1/5) == null()');
+	vrfy(sleep(1) == null(),	'1154: sleep(1) == null()');
+
+	print '1155: Ending test_functions';
 }
 print '017: parsed test_functions()';
 
@@ -1484,31 +1573,31 @@ define test_rand()
 	/* test the additive 55 shuffle generator */
 	tmp = srand(0);
 	print				  '1505: tmp = srand(0)';
-	vrfy(rand() == 0xc79ef743e2e6849c, \
-		  '1506: rand() == 0xc79ef743e2e6849c');
-	vrfy(rand() == 0x8d2dcb2bed321284, \
-		  '1507: rand() == 0x8d2dcb2bed321284');
+	vrfy(rand() == 0x1fe5b46fba7e069d, \
+		  '1506: rand() == 0x1fe5b46fba7e069d');
+	vrfy(rand() == 0x308d32d9bdf2dc6f, \
+		  '1507: rand() == 0x308d32d9bdf2dc6f');
 	tmp = srand(init);
 	print				  '1508: tmp = srand(init)';
-	vrfy(rand() == 0xc79ef743e2e6849c, \
-		  '1509: rand() == 0xc79ef743e2e6849c');
-	vrfy(rand() == 0x8d2dcb2bed321284, \
-		  '1510: rand() == 0x8d2dcb2bed321284');
+	vrfy(rand() == 0x1fe5b46fba7e069d, \
+		  '1509: rand() == 0x1fe5b46fba7e069d');
+	vrfy(rand() == 0x308d32d9bdf2dc6f, \
+		  '1510: rand() == 0x308d32d9bdf2dc6f');
 
 	/* test range interface */
 	tmp = srand(0);
 	print				  '1511: tmp = srand(0)';
-	vrfy(rand(12345678901234567890) == 0x8d2dcb2bed321284, \
-		  '1512: rand(12345678901234567890) == 0x8d2dcb2bed321284');
-	vrfy(rand(216091) == 0x13d2b,	  '1513: rand(216091) == 0x13d2b');
-	vrfy(rand(100) == 0x26,	  '1514: rand(100) == 0x26');
-	vrfy(rand(-46,46) == -0xf,	  '1515: rand(-46,46) == -0xf');
+	vrfy(rand(12345678901234567890) == 0x1fe5b46fba7e069d, \
+		  '1512: rand(12345678901234567890) == 0x1fe5b46fba7e069d');
+	vrfy(rand(216091) == 0xc234,	  '1513: rand(216091) == 0xc234');
+	vrfy(rand(100) == 0x59,	  '1514: rand(100) == 0x59');
+	vrfy(rand(-46,46) == 0x2d,	  '1515: rand(-46,46) == 0x2d');
 	tmp = srand(0);
 	print				  '1516: tmp = srand(0)';
-	vrfy(rand(2^64) == 0xc79ef743e2e6849c, \
-		  '1517: rand(2^64) == 0xc79ef743e2e6849c');
-	vrfy(rand(0,2^64) == 0x8d2dcb2bed321284, \
-		  '1518: rand(0,2^64) == 0x8d2dcb2bed321284');
+	vrfy(rand(2^64) == 0x1fe5b46fba7e069d, \
+		  '1517: rand(2^64) == 0x1fe5b46fba7e069d');
+	vrfy(rand(0,2^64) == 0x308d32d9bdf2dc6f, \
+		  '1518: rand(0,2^64) == 0x308d32d9bdf2dc6f');
 
 	/* test different forms of seeding the initial state */
 	tmp = srand(0);
@@ -1516,7 +1605,7 @@ define test_rand()
 	vrfy(srand() == init,		  '1520: srand() == init');
 	tmp = srand(0x87e6ec938ff55aa5<<64);
 	print	  '1521: tmp = srand(0x87e6ec938ff55aa5<<64)';
-	vrfy(srand() == init,		  '1522: srand() == init');
+	print	  '1522: test disabled';
 	tmp = srand(state0);
 	print				  '1523: tmp = srand(state0)';
 	vrfy(srand() == init,		  '1524: srand() == init');
@@ -1528,35 +1617,35 @@ define test_rand()
 	/* test the bit length interface */
 	tmp = srand(0);
 	print				  '1528: tmp = srand(0)';
-	vrfy(randbit(64) == 0xc79ef743e2e6849c, \
-		  '1529: randbit(64) == 0xc79ef743e2e6849c');
-	vrfy(randbit(128) == 0x8d2dcb2bed3212844f4ad31f3818af34, \
-		  '1530: randbit(128) == 0x8d2dcb2bed3212844f4ad31f3818af34');
-	vrfy(randbit(64) == 0x23a252f60bae4907, \
-		  '1531: randbit(64) == 0x23a252f60bae4907');
-	vrfy(randbit(128) == 0xa8ed5b6203e2b1da32848cd9b3f1e3fa, \
-		  '1532: randbit(128) == 0xa8ed5b6203e2b1da32848cd9b3f1e3fa');
+	vrfy(randbit(64) == 0x1fe5b46fba7e069d, \
+		  '1529: randbit(64) == 0x1fe5b46fba7e069d');
+	vrfy(randbit(128) == 0x308d32d9bdf2dc6f45d3e3b3361b79e4, \
+		  '1530: randbit(128) == 0x308d32d9bdf2dc6f45d3e3b3361b79e4');
+	vrfy(randbit(64) == 0xd4ef1e3336022d81, \
+		  '1531: randbit(64) == 0xd4ef1e3336022d81');
+	vrfy(randbit(128) == 0x66b086e6c34e42124a1fc5d4e5c6f598, \
+		  '1532: randbit(128) == 0x66b086e6c34e42124a1fc5d4e5c6f598');
 	tmp = srand(0);
 	print				  '1533: tmp = srand(0)';
-	vrfy(randbit(32) == 0xc79ef743,	  '1534: randbit(32) == 0xc79ef743');
-	vrfy(randbit(32) == 0xe2e6849c,	  '1535: randbit(32) == 0xe2e6849c');
-	vrfy(randbit(1) == 0x1,		  '1536: randbit(1) == 0x1');
-	vrfy(randbit(5) == 0x3,		  '1537: randbit(5) == 0x3');
-	vrfy(randbit(33) == 0x96e595f6,	  '1538: randbit(33) == 0x96e595f6');
-	vrfy(randbit(25) == 0x1321284,	  '1539: randbit(25) == 0x1321284');
+	vrfy(randbit(32) == 0x1fe5b46f,	  '1534: randbit(32) == 0x1fe5b46f');
+	vrfy(randbit(32) == 0xba7e069d,	  '1535: randbit(32) == 0xba7e069d');
+	vrfy(randbit(1) == 0x0,		  '1536: randbit(1) == 0x0');
+	vrfy(randbit(5) == 0xc,		  '1537: randbit(5) == 0xc');
+	vrfy(randbit(33) == 0x46996cde,	  '1538: randbit(33) == 0x46996cde');
+	vrfy(randbit(25) == 0x1f2dc6f,	  '1539: randbit(25) == 0x1f2dc6f');
 	vrfy(randbit(2) == 0x1,		  '1540: randbit(2) == 0x1');
-	vrfy(randbit(13) == 0x7a5,	  '1541: randbit(13) == 0x7a5');
-	vrfy(randbit(18) == 0x1a63e,	  '1542: randbit(18) == 0x1a63e');
-	vrfy(randbit(8) == 0x70,	  '1543: randbit(8) == 0x70');
-	vrfy(randbit(9) == 0x62,	  '1544: randbit(9) == 0x62');
-	vrfy(randbit(70) == 0x2f3423a252f60bae49, \
-		  '1545: randbit(70) == 0x2f3423a252f60bae49');
+	vrfy(randbit(13) == 0x2e9,	  '1541: randbit(13) == 0x2e9');
+	vrfy(randbit(18) == 0x3c766,	  '1542: randbit(18) == 0x3c766');
+	vrfy(randbit(8) == 0x6c,	  '1543: randbit(8) == 0x6c');
+	vrfy(randbit(9) == 0x6d,	  '1544: randbit(9) == 0x6d');
+	vrfy(randbit(70) == 0x39e4d4ef1e3336022d, \
+		  '1545: randbit(70) == 0x39e4d4ef1e3336022d');
 	print				  '1546: test unused';
-	vrfy(randbit(8) == 0x7,		  '1547: randbit(8) == 0x7');
-	vrfy(randbit(65) == 0x151dab6c407c563b4, \
-		  '1548: randbit(65) == 0x151dab6c407c563b4');
-	vrfy(randbit(63) == 0x32848cd9b3f1e3fa, \
-		  '1549: randbit(63) == 0x32848cd9b3f1e3fa');
+	vrfy(randbit(8) == 0x81,		  '1547: randbit(8) == 0x81');
+	vrfy(randbit(65) == 0xcd610dcd869c8424, \
+		  '1548: randbit(65) == 0xcd610dcd869c8424');
+	vrfy(randbit(63) == 0x4a1fc5d4e5c6f598, \
+		  '1549: randbit(63) == 0x4a1fc5d4e5c6f598');
 
 	/* check to be sure that the srand(1) bug was fixed */
 	tmp = srand(1);
@@ -1565,36 +1654,36 @@ define test_rand()
 	print				  '1551: n = 1';
 	vrfy(num(n),			  '1552: num(n)');
 	vrfy(den(n),			  '1553: den(n)');
-	vrfy(randbit(64) == 0x4280429f8069cb27, \
-		  '1554: randbit(64) == 0x4280429f8069cb27');
-
+	vrfy(randbit(64) == 0xbf989a4c504a541d, \
+		  '1554: randbit(64) == 0xbf989a4c504a541d');
 	/* test randbit skip interface */
 	tmp = srand(0);
 	print				  '1555: tmp = srand(0)';
-	vrfy(randbit(20) == 817647,	  '1556: randbit(20) == 817647');
-	vrfy(randbit(20) == 476130,	  '1557: randbit(20) == 476130');
-	vrfy(randbit(20) == 944201,	  '1558: randbit(20) == 944201');
-	vrfy(randbit(20) == 822573,	  '1559: randbit(20) == 822573');
+	vrfy(randbit(20) == 0x1fe5b,	  '1556: randbit(20) == 0x1fe5b');
+	vrfy(randbit(20) == 0x46fba,	  '1557: randbit(20) == 0x46fba');
+	vrfy(randbit(20) == 0x7e069,	  '1558: randbit(20) == 0x7e069');
+	vrfy(randbit(20) == 0xd308d,	  '1559: randbit(20) == 0xd308d');
 	tmp = srand(0);
 	print				  '1560: tmp = srand(0)';
 	vrfy(randbit(-20) == 20,	  '1561: randbit(-20) == 20');
-	vrfy(randbit(20) == 476130,	  '1562: randbit(20) == 476130');
+	vrfy(randbit(20) == 290746,	  '1562: randbit(20) == 290746');
 	vrfy(randbit(-20) == 20,	  '1563: randbit(-20) == 20');
-	vrfy(randbit(20) == 822573,	  '1564: randbit(20) == 822573');
+	vrfy(randbit(20) == 864397,	  '1564: randbit(20) == 864397');
 
 	/* test randbit without and arg */
 	tmp = srand(0);
 	print				  '1565: tmp = srand(0)';
-	vrfy(randbit() == 1,		  '1566: randbit() == 1');
-	vrfy(randbit() == 1,		  '1567: randbit() == 1');
+	vrfy(randbit() == 0,		  '1566: randbit() == 0');
+	vrfy(randbit() == 0,		  '1567: randbit() == 0');
 	vrfy(randbit() == 0,		  '1568: randbit() == 0');
+	vrfy(randbit() == 1,		  '1569: randbit() == 1');
 
 	/* test seed() as best as we can */
-	vrfy(seed() >= 0,		  '1569: seed() >= 0');
-	vrfy(seed() < 2^64,		  '1570: seed() < 2^64');
-	vrfy(isrand(srand(seed())),	  '1571: isrand(srand(seed()))');
+	vrfy(seed() >= 0,		  '1570: seed() >= 0');
+	vrfy(seed() < 2^64,		  '1571: seed() < 2^64');
+	vrfy(isrand(srand(seed())),	  '1572: isrand(srand(seed()))');
 
-	print '1572: Ending rand test';
+	print '1573: Ending rand test';
 }
 print '025: parsed test_rand()';
 
@@ -1710,7 +1799,23 @@ define test_mode()
 	vrfy(str(3e9) == "3000000000", \
 		'1650: str(3e9) == \"3000000000\"');
 
-	print '1651: Ending mode/base test';
+	/* test base2() functionality */
+	vrfy(base2() == 0,		'1651: base2() == 0');
+	vrfy(base2(0) == 0,		'1652: base2(0) == 0');
+	vrfy(base2() == 0,		'1653: base2() == 0');
+	vrfy(base2(16) == 0,		'1654: base2(16) == 0');
+	vrfy(base2() == 16,		'1655: base2() == 16');
+	vrfy(str(3e9) == "3000000000 /* 0xb2d05e00 */",
+		'1656: str(3e9) == "3000000000 /* 0xb2d05e00 */"');
+	vrfy(base2(1/3) == 16,		'1657: base2(16) == 16');
+	vrfy(str(23209) == "23209 /* 23209 */",
+		'1658: str(23209) == "23209 /* 23209 */"');
+	vrfy(str(3/2) == "1.5 /* 3/2 */",
+		'1659: str(3/2) == "1.5 /* 3/2 */"');
+	vrfy(base() == 10,		'1660: base() == 10');
+	vrfy(base2(0) == 1/3,		'1661: base2(0) == 1/3');
+
+	print '1662: Ending mode/base test';
 }
 print '026: parsed test_mode()';
 
@@ -2105,6 +2210,7 @@ print '033: read -once test2300';
 define test_xx_incdec()
 {
 	local A, B;
+	local n;
 
 	print '2300: Beginning object increment/decrement test';
 
@@ -2137,6 +2243,20 @@ define test_xx_incdec()
 	vrfy(ckmat(B,1,2,3) == 1,
 				'2314: ckmat(B,1,2,3) == 1');
 
+	n = 1;
+	print			'2315: n = 1';
+	vrfy(n + n + n + n++ == 4,
+				'2316: n + n + n + n++ == 4');
+	vrfy(n == 2,		'2317: n == 2');
+	n = 1;
+	print			'2318: n = 1';
+	vrfy(n + n + n++ == 3,	'2319: n + n + n++ == 3');
+	vrfy(n == 2,		'2320: n == 2');
+	n = 1;
+	print			'2321: n = 1';
+	vrfy(n + n++ == 2,	'2322: n + n++ == 3');
+	vrfy(n == 2,		'2323: n == 2');
+
 	print '2315: Ending object increment/decrement test';
 }
 print '034: parsed test_xx_incdec()';
@@ -2987,7 +3107,7 @@ define test_error()
 	vrfy(root(3,2,0) == error(10029),
 				    '3644: root(3,2,0) == error(10029)');
 	vrfy(norm("x") == error(10030), '3645: norm("x") == error(10030)');
-	vrfy(null() << 2 == error(10031),'3646: null() << 2 == error(10031)');
+	vrfy(list() << 2 == error(10031),'3646: list() << 2 == error(10031)');
 	vrfy(1.5 << 2 == error(10031),	'3647: 1.5 << 2 == error(10031)');
 	vrfy(3 << "x" == error(10032),	'3648: 3 << "x" == error(10032)');
 	vrfy(3 << 1.5 == error(10032),	'3649: 3 << 1.5 == error(10032)');
@@ -3085,8 +3205,7 @@ define test_error()
 	print				'3712: e9999 = error(9999)';
 	vrfy(errno() == 9999,		'3713: errno() == 9999');
 	vrfy(error() == e9999,		'3714: error() == e9999');
-	vrfy(substr(strerror(), strpos(strerror(),"9999"), 4) == "9999",
-	    '3715: substr(strerror(), strpos(strerror(),"9999"), 4) == "9999"');
+	/* test 3715 removed due to non-portable strerror() output */
 	x = newerror("Alpha");
 	print				'3716: x = newerror("Alpha")';
 	n = iserror(x);
@@ -3097,16 +3216,14 @@ define test_error()
 	vrfy(errno(9999) == n,		'3721: errno() == n');
 	vrfy(errno() == 9999,		'3722: errno() == 9999');
 	vrfy(error() == e9999,		'3723: error() == e9999');
-	vrfy(substr(strerror(), strpos(strerror(),"9999"), 4) == "9999",
-	    '3724: substr(strerror(), strpos(strerror(),"9999"), 4) == "9999"');
+	/* test 3724 removed due to non-portable strerror() output */
 	a = 1/0;
 	print				'3725: a = 1/0';
 	vrfy(strerror() == "Division by zero",
 				'3726: strerror() == "Division by zero"');
 	n = 8191;
 	print				'3727: n = 8191';
-	vrfy(substr(strerror(8191),strpos(strerror(n),"8191"), 4) == "8191",
-	    '3728: substr(strerror(n),strpos(strerror(n),"8191"),4) == "8191"');
+	/* test 3728 removed due to non-portable strerror() output */
 
 	/* errmax and errcount should be bumped up the 148 errors above */
 	vrfy(errcount() == ecnt,	'3729: errcount() == ecnt');
@@ -4467,7 +4584,14 @@ define test_random()
 	vrfy(seed() < 2^64,		  '5465: seed() < 2^64');
 	vrfy(israndom(srandom(seed())),	  '5466: israndom(srandom(seed()))');
 
-	print '5467: Ending test_random';
+	/* verify random(10,11) double bug fix */
+	vrfy(random(10,11) == 10,	  '5467: random(10,11) == 10');
+	vrfy(random(10,11) == 10,	  '5468: random(10,11) == 10');
+	vrfy(random(10,11) == 10,	  '5469: random(10,11) == 10');
+	vrfy(random(0,1) == 0,		  '5470: random(0,1) == 0');
+	vrfy(random(0,1) == 0,		  '5471: random(0,1) == 0');
+
+	print '5472: Ending test_random';
 }
 print '137: parsed test_random()';
 
@@ -5037,10 +5161,17 @@ define test_is()
 	 */
 	a = assoc();
 	print				  '5901: a = assoc()';
-	ofd = fopen("/dev/null", "r");
-	print				  '5902: ofd = fopen("/dev/null", "r")';
-	cfd = fopen("/dev/null", "r");
-	print				  '5903: cfd = fopen("/dev/null", "r")';
+	if (config("windows")) {
+	    ofd = fopen("NUL:", "rb");
+	    print			  '5902: ofd = fopen("NUL:", "rb")';
+	    cfd = fopen("NUL:", "rb");
+	    print			  '5903: cfd = fopen("NUL:", "rb")';
+	} else {
+	    ofd = fopen("/dev/null","rb");
+	    print			  '5902: ofd = fopen("/dev/null","rb")';
+	    cfd = fopen("/dev/null","rb");
+	    print			  '5903: cfd = fopen("/dev/null","rb")';
+	}
 	fclose(cfd);
 	print				  '5904: fclose(cfd)';
 	blk = blk();
@@ -6218,8 +6349,8 @@ define test_blkcpy()
 
 	/* blkcpy the last 5 octets of B1 to a new block C */
 
-	blkcpy(C = blk(), B1, 5, ,100);
-	print				  '6821: blkcpy(C = blk(), B1, 5, ,100);';
+	blkcpy(C = blk(), B1,5,,100);
+	print				  '6821: blkcpy(C = blk(), B1,5,,100);';
 	vrfy(C == A,			  '6822: C == A');
 
 	/* blkcpy to and from a file */
@@ -6235,8 +6366,8 @@ define test_blkcpy()
 	blkcpy(fs, A, ,100);
 	print				  '6828: blkcpy(fs, A, ,100);';
 	vrfy(size(fs) == 105,		  '6829: size(f) == 105');
-	blkcpy(C = blk(), fs, 2, ,100);
-	print				  '6830: blkcpy(C = blk(), fs, 2, ,100)';
+	blkcpy(C = blk(), fs,2,,100);
+	print				  '6830: blkcpy(C = blk(), fs,2,,100)';
 	vrfy(C == (blk() = {1,2}),	  '6831: C == (blk() = {1,2}');
 
 	/* blkcpy string to a block */
@@ -7518,7 +7649,9 @@ vrfy(j8300(10) == 11,		'8307: j8300(10) == 11');
 {static k8300 = 5} define l8300(x) = k8300 + x;
 print	'8308: {static k8300 = 5} define l8300(x) = k8300 + x;';
 vrfy(l8300(10) == 15,		'8309: l8300(10) == 15');
-print	'8310: Ending define tests';
+static a8300 = 1, b8300;
+vrfy(a8300 == 1,		'8310: a8300 == 1');
+print	'8311: Ending define tests';
 
 
 /*
@@ -7541,6 +7674,15 @@ read -once "test8500";
 /* 85xx: Ending test_divmod is printed by test8500.cal */
 
 
+/*
+ * test_maxargs - test up to 1024 args being passed to a builtin function
+ */
+print;
+print '8600: Starting test_1024args'
+read -once "test8600";
+/* 86xx: Ending test_1024args is printed by test8600.cal */
+
+
 /*
  * read various calc resource files
  *

cal/repeat.cal

@@ -0,0 +1,53 @@
+/*
+ * repeat - return the value of a repeated set of digits
+ *
+ * Copyright (C) 2003  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: repeat.cal,v 29.4 2003/01/26 19:42:03 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/repeat.cal,v $
+ *
+ * Under source code control:	2003/01/05 00:00:01
+ * File existed as early as:	2003
+ *
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+
+/*
+ * repeat - return the value of a repeated set of digits
+ *
+ * usage:
+ *	repeat(digit_set, repeat_count)
+ */
+define repeat(digit_set, repeat_count)
+{
+    local digit_count;	/* digits in the digit_set */
+
+    /* firewall */
+    if (!isint(digit_set) || digit_set <= 0) {
+	quit "digit set must be an integer > 0";
+    }
+    if (!isint(repeat_count) || repeat_count <= 0) {
+	quit "repeat count must be an integer > 0";
+    }
+
+    /* return repeated set of digits */
+    digit_count = digits(digit_set);
+    return digit_set * (10^(digit_count*repeat_count)-1) / (10^digit_count-1);
+}

cal/seedrandom.cal

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: seedrandom.cal,v 29.1 1999/12/14 09:15:33 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: seedrandom.cal,v 29.3 2001/03/31 13:31:34 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/seedrandom.cal,v $
  *
  * Under source code control:	1996/01/01 08:21:00
  * File existed as early as:	1996
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*
@@ -115,7 +115,7 @@ define seedrandom(seed1, seed2, size, trials)
 			p = 2*fp+1;
 		} while (ptest(p,1,0) == 0);
 	} while(ptest(p, trials) == 0 || ptest(fp, trials) == 0);
-	if (config("resource_debug") & 3) {
+	if (config("resource_debug") & 8) {
 		print "/* 1st Blum prime */ p=", p;
 	}
 
@@ -129,7 +129,7 @@ define seedrandom(seed1, seed2, size, trials)
 			q = 2*fq+1;
 		} while (ptest(q,1,0) == 0);
 	} while(ptest(q, trials) == 0 || ptest(fq, trials) == 0);
-	if (config("resource_debug") & 3) {
+	if (config("resource_debug") & 8) {
 		print "/* 2nd Blum prime */ q=", q;
 	}
 
@@ -139,7 +139,7 @@ define seedrandom(seed1, seed2, size, trials)
 	n = p*q;				/* the Blum modulus */
 	binsize = highbit(n)+1;			/* smallest power of 2 > p*q */
 	r = pmod(rand(1<<ceil(binsize*4/5), 1<<(binsize-2)), 2, n);
-	if (config("resource_debug") & 3) {
+	if (config("resource_debug") & 8) {
 		print "/* seed quadratic residue */ r=", r;
 		print "/* newn", binsize, "bit quadratic residue*/ newn=", n;
 	}

cal/solve.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: solve.cal,v 29.1 1999/12/14 09:15:33 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: solve.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/solve.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:37
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/sumsq.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: sumsq.cal,v 29.1 1999/12/14 09:15:33 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: sumsq.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/sumsq.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:37
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/surd.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: surd.cal,v 29.1 1999/12/14 09:15:33 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: surd.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/surd.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:38
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

cal/test1700.cal

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test1700.cal,v 29.1 1999/12/14 09:15:33 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: test1700.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test1700.cal,v $
  *
  * Under source code control:	1994/03/14 23:12:51
  * File existed as early as:	1994
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

cal/test2300.cal

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test2300.cal,v 29.1 1999/12/14 09:15:33 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: test2300.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test2300.cal,v $
  *
  * Under source code control:	1995/07/09 06:12:13
  * File existed as early as:	1995
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

cal/test2600.cal

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test2600.cal,v 29.1 1999/12/14 09:15:33 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: test2600.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test2600.cal,v $
  *
  * Under source code control:	1995/10/13 00:13:14
  * File existed as early as:	1995
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/test2700.cal

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test2700.cal,v 29.1 1999/12/14 09:15:33 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: test2700.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test2700.cal,v $
  *
  * Under source code control:	1995/11/01 22:52:25
  * File existed as early as:	1995
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/test3100.cal

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test3100.cal,v 29.1 1999/12/14 09:15:33 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: test3100.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test3100.cal,v $
  *
  * Under source code control:	1995/11/28 11:56:57
  * File existed as early as:	1995
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

cal/test3300.cal

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test3300.cal,v 29.1 1999/12/14 09:15:33 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: test3300.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test3300.cal,v $
  *
  * Under source code control:	1995/12/02 04:27:41
  * File existed as early as:	1995
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

cal/test3400.cal

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test3400.cal,v 29.1 1999/12/14 09:15:34 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: test3400.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test3400.cal,v $
  *
  * Under source code control:	1995/12/02 05:20:11
  * File existed as early as:	1995
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/test3500.cal

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test3500.cal,v 29.1 1999/12/14 09:15:34 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: test3500.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test3500.cal,v $
  *
  * Under source code control:	1995/12/18 22:50:46
  * File existed as early as:	1995
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/test4000.cal

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test4000.cal,v 29.1 1999/12/14 09:15:34 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: test4000.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test4000.cal,v $
  *
  * Under source code control:	1996/03/13 02:38:45
  * File existed as early as:	1996
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/test4100.cal

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test4100.cal,v 29.1 1999/12/14 09:15:34 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: test4100.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test4100.cal,v $
  *
  * Under source code control:	1996/03/13 03:53:22
  * File existed as early as:	1996
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/test4600.cal

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test4600.cal,v 29.1 1999/12/14 09:15:34 chongo Exp $
+ * @(#) $Revision: 29.4 $
+ * @(#) $Id: test4600.cal,v 29.4 2001/04/10 22:09:02 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test4600.cal,v $
  *
  * Under source code control:	1996/07/02 20:04:40
  * File existed as early as:	1996
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 
@@ -53,10 +53,10 @@ define stest(str, verbose)
 	/*
 	 * do file operations
 	 */
-	f = fopen("junk4600", "w");
+	f = fopen("junk4600", "wb");
 	if (iserror(f)) {
 		print 'failed';
-		print '**** fopen("junk4600", "w") failed';
+		print '**** fopen("junk4600", "wb") failed';
 		return 1;
 	}
 	if (iserror(fputs(f,
@@ -67,9 +67,9 @@ define stest(str, verbose)
 		print '**** fputs(f, "Fourscore ... failed';
 		return 1;
 	}
-	if (iserror(freopen(f, "r"))) {
+	if (iserror(freopen(f, "rb"))) {
 		print 'failed';
-		print '**** iserror(freopen(f, "r")) failed';
+		print '**** iserror(freopen(f, "rb")) failed';
 		return 1;
 	}
 	if (iserror(rewind(f))) {
@@ -173,7 +173,7 @@ define ttest(str, m, n, verbose)
 		print str:":",:;
 	}
 	i = rm("-f", "junk4600");
-	f = fopen("junk4600", "w");
+	f = fopen("junk4600", "wb");
 
 	if (isnull(n))
 		n = 4;
@@ -198,7 +198,7 @@ define ttest(str, m, n, verbose)
 	fflush(f);
 	if (verbose > 1)
 		printf("File has size %d\n", pos[i]);
-	freopen(f, "r");
+	freopen(f, "rb");
 	if (size(f) != pos[i]) {
 		print 'failed';
 		printf("**** Failure 1 for file size\n");

cal/test5100.cal

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test5100.cal,v 29.1 1999/12/14 09:15:34 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: test5100.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test5100.cal,v $
  *
  * Under source code control:	1996/12/02 23:57:10
  * File existed as early as:	1996
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

cal/test5200.cal

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test5200.cal,v 29.1 1999/12/14 09:15:34 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: test5200.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test5200.cal,v $
  *
  * Under source code control:	1997/02/07 02:48:10
  * File existed as early as:	1997
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

cal/test8400.cal

@@ -17,15 +17,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test8400.cal,v 29.1 1999/12/14 09:15:34 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: test8400.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test8400.cal,v $
  *
  * Under source code control:	1999/10/31 01:00:03
  * File existed as early as:	1999
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

cal/test8500.cal

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: test8500.cal,v 29.1 1999/12/14 09:15:34 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: test8500.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/test8500.cal,v $
  *
  * Under source code control:	1999/11/12 20:59:59
  * File existed as early as:	1999
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/unitfrac.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: unitfrac.cal,v 29.1 1999/12/14 09:15:34 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: unitfrac.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/unitfrac.cal,v $
  *
  * Under source code control:	1990/02/15 01:50:38
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/varargs.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: varargs.cal,v 29.1 1999/12/14 09:15:34 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: varargs.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/varargs.cal,v $
  *
  * Under source code control:	1991/05/22 21:56:34
  * File existed as early as:	1991
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 /*

cal/xx_print.cal

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: xx_print.cal,v 29.1 1999/12/14 09:15:34 chongo Exp $
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: xx_print.cal,v 29.2 2000/06/07 14:02:25 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/cal/RCS/xx_print.cal,v $
  *
  * Under source code control:	1997/04/17 00:08:50
  * File existed as early as:	1997
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 

calc.h

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: calc.h,v 29.2 1999/12/14 19:37:46 chongo Exp $
+ * @(#) $Revision: 29.11 $
+ * @(#) $Id: calc.h,v 29.11 2003/08/26 04:36:10 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.h,v $
  *
  * Under source code control:	1990/02/15 01:48:31
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 
@@ -32,10 +32,15 @@
 #define __CALC_H__
 
 #include <setjmp.h>
-
-#include "value.h"
-
-#include "have_const.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "win32dll.h"
+# include "value.h"
+# include "have_const.h"
+#else
+# include <calc/win32dll.h>
+# include <calc/value.h>
+# include <calc/have_const.h>
+#endif
 
 
 /*
@@ -55,15 +60,18 @@
 #define HOMECHAR	'~'	/* char which indicates home directory */
 #define DOTCHAR		'.'	/* char which indicates current directory */
 #define PATHCHAR	'/'	/* char which separates path components */
+#if defined(__MSDOS__) || defined(__WIN32)
+#define LISTCHAR	';'	/* char which separates paths in a list */
+#else
 #define LISTCHAR	':'	/* char which separates paths in a list */
+#endif
 #define MAXCMD		16384	/* maximum length of command invocation */
 #define MAXERROR	512	/* maximum length of error message string */
 
 #define SYMBOLSIZE	256	/* maximum symbol name size */
-#define MAXINDICES	20	/* maximum number of indices for objects */
 #define MAXLABELS	100	/* maximum number of user labels in function */
 #define MAXSTRING	1024	/* maximum size of string constant */
-#define MAXSTACK	1000	/* maximum depth of evaluation stack */
+#define MAXSTACK	2048	/* maximum depth of evaluation stack */
 #define MAXFILES	20	/* maximum number of opened files */
 #define PROMPT1		"> "	/* default normal prompt*/
 #define PROMPT2		">> "	/* default prompt inside multi-line input */
@@ -95,152 +103,157 @@
 /*
  * File I/O routines.
  */
-extern FILEID openid(char *name, char *mode);
-extern FILEID indexid(long index);
-extern BOOL validid(FILEID id);
-extern BOOL errorid(FILEID id);
-extern BOOL eofid(FILEID id);
-extern int closeid(FILEID id);
-extern int getcharid(FILEID id);
-extern int idprintf(FILEID id, char *fmt, int count, VALUE **vals);
-extern int idfputc(FILEID id, int ch);
-extern int idfputs(FILEID id, char *str);
-extern int printid(FILEID id, int flags);
-extern int flushid(FILEID id);
-extern int readid(FILEID id, int flags, char **retptr);
-extern int getloc(FILEID id, ZVALUE *loc);
-extern int setloc(FILEID id, ZVALUE zpos);
-extern int getsize(FILEID id, ZVALUE *size);
-extern int get_device(FILEID id, ZVALUE *dev);
-extern int get_inode(FILEID id, ZVALUE *ino);
-extern FILEID reopenid(FILEID id, char *mode, char *name);
-extern int closeall(void);
-extern int flushall(void);
-extern int idfputstr(FILEID id, char *str);
-extern int rewindid(FILEID id);
-extern void rewindall(void);
-extern ZVALUE zfilesize(FILEID id);
-extern void showfiles(void);
-extern int fscanfid(FILEID id, char *fmt, int count, VALUE **vals);
-extern int scanfstr(char *str, char *fmt, int count, VALUE **vals);
-extern int ftellid(FILEID id, ZVALUE *res);
-extern int fseekid(FILEID id, ZVALUE offset, int whence);
-extern int isattyid(FILEID id);
-extern int fsearch(FILEID id, char *str, ZVALUE start, ZVALUE end, ZVALUE *res);
-extern int frsearch(FILEID id, char *str, ZVALUE first, ZVALUE last, ZVALUE *res);
-extern void showconstants(void);
-extern void freeconstant(unsigned long);
-extern void freestringconstant(long);
-extern void trimconstants(void);
+extern DLL FILEID openid(char *name, char *mode);
+extern DLL FILEID indexid(long index);
+extern DLL BOOL validid(FILEID id);
+extern DLL BOOL errorid(FILEID id);
+extern DLL BOOL eofid(FILEID id);
+extern DLL int closeid(FILEID id);
+extern DLL int getcharid(FILEID id);
+extern DLL int idprintf(FILEID id, char *fmt, int count, VALUE **vals);
+extern DLL int idfputc(FILEID id, int ch);
+extern DLL int idfputs(FILEID id, char *str);
+extern DLL int printid(FILEID id, int flags);
+extern DLL int flushid(FILEID id);
+extern DLL int readid(FILEID id, int flags, char **retptr);
+extern DLL int getloc(FILEID id, ZVALUE *loc);
+extern DLL int setloc(FILEID id, ZVALUE zpos);
+extern DLL int getsize(FILEID id, ZVALUE *size);
+extern DLL int get_device(FILEID id, ZVALUE *dev);
+extern DLL int get_inode(FILEID id, ZVALUE *ino);
+extern DLL FILEID reopenid(FILEID id, char *mode, char *name);
+extern DLL int closeall(void);
+
+#if !defined(_WIN32)
+extern DLL int flushall(void);
+#endif
+
+extern DLL int idfputstr(FILEID id, char *str);
+extern DLL int rewindid(FILEID id);
+extern DLL void rewindall(void);
+extern DLL ZVALUE zfilesize(FILEID id);
+extern DLL void showfiles(void);
+extern DLL int fscanfid(FILEID id, char *fmt, int count, VALUE **vals);
+extern DLL int scanfstr(char *str, char *fmt, int count, VALUE **vals);
+extern DLL int ftellid(FILEID id, ZVALUE *res);
+extern DLL int fseekid(FILEID id, ZVALUE offset, int whence);
+extern DLL int isattyid(FILEID id);
+extern DLL int fsearch(FILEID id, char *str, ZVALUE start, ZVALUE end, ZVALUE *res);
+extern DLL int frsearch(FILEID id, char *str, ZVALUE first, ZVALUE last, ZVALUE *res);
+extern DLL void showconstants(void);
+extern DLL void freeconstant(unsigned long);
+extern DLL void freestringconstant(long);
+extern DLL void trimconstants(void);
 
 /*
  * Input routines.
  */
-extern int openstring(char *str, long num);
-extern int openterminal(void);
-extern int opensearchfile(char *name, char *pathlist, char *exten, int reopen_ok);
-extern char *nextline(void);
-extern int nextchar(void);
-extern void reread(void);
-extern void resetinput(void);
-extern void setprompt(char *);
-extern BOOL inputisterminal(void);
-extern int inputlevel(void);
-extern long calclevel(void);
-extern char *inputname(void);
-extern long linenumber(void);
-extern void runrcfiles(void);
-extern void closeinput(void);
+extern DLL int openstring(char *str, long num);
+extern DLL int openterminal(void);
+extern DLL int opensearchfile(char *name, char *pathlist, char *exten, int reopen_ok);
+extern DLL char *nextline(void);
+extern DLL int nextchar(void);
+extern DLL void reread(void);
+extern DLL void resetinput(void);
+extern DLL void setprompt(char *);
+extern DLL BOOL inputisterminal(void);
+extern DLL int inputlevel(void);
+extern DLL long calclevel(void);
+extern DLL char *inputname(void);
+extern DLL long linenumber(void);
+extern DLL void runrcfiles(void);
+extern DLL void closeinput(void);
 
 /*
  * Other routines.
  */
-extern NUMBER *constvalue(unsigned long index);
-extern long addnumber(char *str);
-extern long addqconstant(NUMBER *q);
-extern void initstack(void);
-extern void getcommands(BOOL toplevel);
-extern void givehelp(char *type);
-extern void libcalc_call_me_first(void);
-extern void libcalc_call_me_last(void);
-extern BOOL calc_tty(int fd);
-extern BOOL orig_tty(int fd);
-extern void showerrors(void);
-extern char *calc_strdup(CONST char *);
-extern void getshellfile(char *shellfile);
+extern DLL NUMBER *constvalue(unsigned long index);
+extern DLL long addnumber(char *str);
+extern DLL long addqconstant(NUMBER *q);
+extern DLL void initstack(void);
+extern DLL void getcommands(BOOL toplevel);
+extern DLL void givehelp(char *type);
+extern DLL void libcalc_call_me_first(void);
+extern DLL void libcalc_call_me_last(void);
+extern DLL BOOL calc_tty(int fd);
+extern DLL BOOL orig_tty(int fd);
+extern DLL void showerrors(void);
+extern DLL char *calc_strdup(CONST char *);
 
 /*
  * Initialization
  */
-extern void initialize(void);
-extern void reinitialize(void);
-extern int isatty(int tty);	/* TRUE if fd is a tty */
-extern char *version(void);	/* return version string */
-extern int post_init;		/* TRUE => setjmp for math_error is ready */
+extern DLL void initialize(void);
+extern DLL void reinitialize(void);
+#if !defined (_WIN32)
+extern DLL int isatty(int tty);	/* TRUE if fd is a tty */
+#endif
+extern DLL char *version(void);	/* return version string */
+extern DLL int post_init;	/* TRUE => math_error setjmp is ready */
 
 /*
  * global flags and definitions
  */
-extern int abortlevel;		/* current level of aborts */
-extern BOOL inputwait;		/* TRUE if in a terminal input wait */
-extern jmp_buf jmpbuf;		/* for errors */
+extern DLL int abortlevel;	/* current level of aborts */
+extern DLL BOOL inputwait;	/* TRUE if in a terminal input wait */
+extern DLL jmp_buf jmpbuf;	/* for errors */
 
-extern int p_flag;		/* TRUE => pipe mode */
-extern int q_flag;		/* TRUE => don't execute rc files */
-extern int u_flag;		/* TRUE => unbuffer stdin and stdout */
-extern int d_flag;		/* TRUE => disable heading, resource_debug */
-extern int c_flag;		/* TRUE => continue after error if permitted */
-extern int i_flag;		/* TRUE => try to go interactive after error */
-extern int s_flag;		/* TRUE => keep args as strings for argv() */
-extern int stoponerror;		/* >0 => stop, <0 => continue, ==0 => use -c */
-extern BOOL abort_now;		/* TRUE => try to go interactive */
+extern DLL int p_flag;		/* TRUE => pipe mode */
+extern DLL int q_flag;		/* TRUE => don't execute rc files */
+extern DLL int u_flag;		/* TRUE => unbuffer stdin and stdout */
+extern DLL int d_flag;		/* TRUE => disable heading, resource_debug */
+extern DLL int c_flag;		/* TRUE => continue after error if permitted */
+extern DLL int i_flag;		/* TRUE => try to go interactive after error */
+extern DLL int s_flag;		/* TRUE => keep args as strings for argv() */
+extern DLL int stoponerror;	/* >0 => stop, <0 => continue, ==0 => use -c */
+extern DLL BOOL abort_now;	/* TRUE => try to go interactive */
 
-extern int argc_value;		/* count of argv[] strings for argv() builtin */
-extern char **argv_value;	/* argv[] strings for argv() builtin */
+extern DLL int argc_value;	/* count of argv[] strings for argv() builtin */
+extern DLL char **argv_value;	/* argv[] strings for argv() builtin */
 
-extern char *pager;		/* $PAGER or default */
-extern int stdin_tty;		/* TRUE if stdin is a tty */
-extern int havecommands;	/* TRUE if have cmd args) */
-extern char *program;		/* our name */
-extern char *base_name;		/* basename of our name */
-extern char cmdbuf[];		/* command line expression */
+extern DLL char *pager;		/* $PAGER or default */
+extern DLL int stdin_tty;	/* TRUE if stdin is a tty */
+extern DLL int havecommands;	/* TRUE if have cmd args) */
+extern DLL char *program;	/* our name */
+extern DLL char *base_name;	/* basename of our name */
+extern DLL char cmdbuf[];	/* command line expression */
 
-extern int abortlevel;		/* current level of aborts */
-extern BOOL inputwait;		/* TRUE if in a terminal input wait */
-extern VALUE *stack;		/* execution stack */
-extern int dumpnames;		/* TRUE => dump names rather than indices */
+extern DLL int abortlevel;	/* current level of aborts */
+extern DLL BOOL inputwait;	/* TRUE if in a terminal input wait */
+extern DLL VALUE *stack;	/* execution stack */
+extern DLL int dumpnames;	/* TRUE => dump names rather than indices */
 
-extern char *calcpath;		/* $CALCPATH or default */
-extern char *calcrc;		/* $CALCRC or default */
-extern char *calcbindings;	/* $CALCBINDINGS or default */
-extern char *home;		/* $HOME or default */
-extern char *shell;		/* $SHELL or default */
-extern char *program;		/* our name (argv[0]) */
+extern DLL char *calcpath;	/* $CALCPATH or default */
+extern DLL char *calcrc;	/* $CALCRC or default */
+extern DLL char *calcbindings;	/* $CALCBINDINGS or default */
+extern DLL char *home;		/* $HOME or default */
+extern DLL char *shell;		/* $SHELL or default */
+extern DLL char *program;	/* our name (argv[0]) */
 
-extern int no_env;	/* TRUE (-e) => ignore env vars on startup */
-extern int errmax;	/* if >= 0, error when errcount exceeds errmax */
-extern int new_std;	/* TRUE (-n) => use newstd configuration */
+extern DLL int no_env;		/* TRUE (-e) => ignore env vars on startup */
+extern DLL int errmax;	/* if >= 0, error when errcount exceeds errmax */
+extern DLL int use_old_std;	/* TRUE (-O) => use classic configuration */
 
-extern int allow_read;	/* FALSE => may not open any files for reading */
-extern int allow_write; /* FALSE => may not open any files for writing */
-extern int allow_exec;	/* FALSE => may not execute any commands */
+extern DLL int allow_read;	/* FALSE => dont open any files for reading */
+extern DLL int allow_write; 	/* FALSE => dont open any files for writing */
+extern DLL int allow_exec;	/* FALSE => may not execute any commands */
 
 /*
  * calc startup and run state
  */
 typedef enum {
-    RUN_UNKNOWN = -1,		/* unknown or unset start state */
-    RUN_BEGIN = 0,		/* calc execution starts */
-    RUN_RCFILES = 1,		/* rc files being evaluated */
-    RUN_PRE_CMD_ARGS = 2,	/* prepare to evaluate cmd args */
-    RUN_CMD_ARGS = 3,		/* cmd args being evaluated */
-    RUN_PRE_TOP_LEVEL = 4,	/* prepare to start top level activity */
-    RUN_TOP_LEVEL = 5,		/* running at top level */
-    RUN_EXIT = 6,		/* normal exit from calc */
-    RUN_EXIT_WITH_ERROR = 7	/* exit with error */
+    RUN_ZERO,			/* unknown or unset start state */
+    RUN_BEGIN,			/* calc execution starts */
+    RUN_RCFILES,		/* rc files being evaluated */
+    RUN_PRE_CMD_ARGS,		/* prepare to evaluate cmd args */
+    RUN_CMD_ARGS,		/* cmd args being evaluated */
+    RUN_PRE_TOP_LEVEL,		/* prepare to start top level activity */
+    RUN_TOP_LEVEL,		/* running at top level */
+    RUN_EXIT,			/* normal exit from calc */
+    RUN_EXIT_WITH_ERROR		/* exit with error */
 } run;
-extern run run_state;
-extern char *run_state_name(run state);
+extern DLL run run_state;
+extern DLL char *run_state_name(run state);
 
 /*
  * calc version information
@@ -249,9 +262,9 @@ extern char *run_state_name(run state);
 extern int calc_major_ver;
 extern int calc_minor_ver;
 extern int calc_major_patch;
-extern char *calc_minor_patch;
+extern int calc_minor_patch;
 extern char *Copyright;
-extern char *version(void);
+extern DLL char *version(void);
 
 
 #endif /* !__CALC_H__ */

calc.man

@@ -15,15 +15,15 @@
 .\" received a copy with calc; if not, write to Free Software Foundation, Inc.
 .\" 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 .\"
-.\" @(#) $Revision: 29.4 $
-.\" @(#) $Id: calc.man,v 29.4 1999/12/17 10:06:31 chongo Exp $
+.\" @(#) $Revision: 29.12 $
+.\" @(#) $Id: calc.man,v 29.12 2004/02/23 05:21:24 chongo Exp $
 .\" @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.man,v $
 .\"
 .\" Under source code control:	    1991/07/23 05:48:26
 .\" File existed as early as:	    1991
 .\"
-.\" chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-.\" Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+.\" chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+.\" Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
 .\"
 .\" calculator by David I. Bell
 .\" man page by Landon Noll
@@ -36,24 +36,25 @@ calc \- arbitrary precision calculator
 .RB [ \-c ]
 .RB [ \-C ]
 .RB [ \-d ]
-.RB [ -D\ \&calc_debug[:resource_debug[:user_debug]] ]
 .br
 .in +5n
+.RB [ -D\ \&calc_debug[:resource_debug[:user_debug]] ]
+.br
 .RB [ \-e ]
 .RB [ \-h ]
 .RB [ \-i ]
 .RB [ \-m\ \&mode ]
-.RB [ \-n ]
+.RB [ \-O ]
+.br
 .RB [ \-p ]
 .RB [ \-q ]
 .RB [ \-s ]
 .RB [ \-u ]
 .RB [ \-v ]
-.br
 .RB [ calc_cmd\ \&.\|.\|. ]
 .in -5n
 .sp
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ [other_flags\ \&...]
+\fI#!${BINDIR}/calc\fP\ [other_flags\ \&...] \fB\-f\fP\
 .SH DESCRIPTION
 \&
 .br
@@ -301,11 +302,22 @@ The reading of key bindings is also disabled
 when the mode disables opening of files for reading.
 
 .TP
-.B \-n
-Use the new configuration defaults instead of the old
-default classic defaults.
+.B \-O
+Use the old classic defaults instead of the
+default configuration.
 This flag as the same effect
-as executing \fBconfig("all", "newcfg")\fP at startup time.
+as executing \fBconfig("all", "oldcfg")\fP at startup time.
+.sp 1
+NOTE: Older versions of calc used
+.B \-n
+to setup a modified form of the default calc configuration.
+The
+.B \-n
+flag currently does nothing.
+Use of the
+.B \-n
+flag is now deprecated and may be used for
+something else in the future.
 
 .TP
 .B \-p
@@ -513,8 +525,8 @@ searches in succession:
 ./myfile.cal
 ${LIBDIR}/myfile
 ${LIBDIR}/myfile.cal
-${CUSTOMLIBDIR}/myfile
-${CUSTOMLIBDIR}/myfile.cal
+${CUSTOMCALDIR}/myfile
+${CUSTOMCALDIR}/myfile.cal
 .fi
 .in -5n
 .sp 1
@@ -571,27 +583,25 @@ If first line of an executable file begins
 followed by the absolute pathname of the
 .B calc
 program and the flag
-.B \-S
+.B \-f
 as in:
 .sp 1
 .in +5n
 .nf
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ [other_flags\ \&...]
+\fI#!${BINDIR}/calc\fP\ [other_flags\ \&...] \fB\-f\fP\
 .fi
 .in -5n
 .sp 1
 the rest of the file will be processed in
 .BR "shell script mode" .
 Note that
-.B \-S
-(UPPER CASE
-.BR \-S )
+.B \-f
 must be the first \-flag on the ``#!'' line.
 Any other optional
 .B "other_flags"
 must come after
 the
-.BR \-S .
+.BR \-f .
 .sp 1
 In
 .B "shell script mode"
@@ -624,7 +634,7 @@ the file
 .sp 1
 .in +5n
 .nf
-\fI#!${BINDIR}/calc\fP\ \fB\-S\fP\ \&\fB\-q\fP
+\fI#!${BINDIR}/calc\fP\ \&\fB\-q\fP \fB\-f\fP\
 #
 # mersenne - an example of a calc \fBshell script file\fP
 
@@ -838,7 +848,7 @@ ${LIBDIR}/bindings
 non-GNU-readline command line editor bindings
 .sp 1
 .TP 5
-${INCDIRCALC}/*.h
+${CALC_INCDIR}/*.h
 include files for C interface use
 .sp 1
 .TP 5
@@ -850,7 +860,7 @@ ${LIBDIR}/libcustcalc.a
 custom binary link library
 .sp 1
 .TP 5
-${CUSTOMLIBDIR}/*.cal
+${CUSTOMCALDIR}/*.cal
 custom resource files
 .sp 1
 .TP 5
@@ -993,36 +1003,78 @@ Copyright (C) 1999  Landon Curt Noll
 and is covered under version 2.1 GNU Lesser General
 Public License.
 .sp
-.SH "BUG REPORTS / BUG FIXES / ENHANCEMENTS"
+.SH "CALC MAILING LIST / CALC UPDATES / ENHANCEMENTS"
 \&
 .br
 .sp
-Send comments, suggestions, bug fixes, enhancements
+To contribute comments, suggestions, enhancements
 and interesting
 .B calc
-resource files,
-.B calc
-shell scripts that you would like you see included
-in future distributions to:
+resource files, and
+shell scripts please join the low volume calc mailing list.
+.sp
+To join the low volume calc mailing list, send EMail to:
 .sp
 .in +0.5i
 .nf
-calc-tester at postofc dot corp dot sgi dot com
-
-[[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+calc-tester-request at asthe dot com
 .fi
 .in -0.5i
 .sp
-Bug reports are sent to:
+Your subject must contain the words:
 .sp
 .in +0.5i
 .nf
-calc-bugs at postofc dot corp dot sgi dot com
-
-[[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+calc mailing list subscription
 .fi
 .in -0.5i
 .sp
+You may have additional words in your subject line.
+.sp
+Your message body must contain:
+.sp
+.in +0.5i
+.nf
+subscribe calc-tester address
+end
+name your_full_name
+.fi
+.in -0.5i
+.sp
+where
+.B address
+s your EMail address and
+.B your_full_name
+is your full name.
+Feel free to follow the
+.B name
+line with additional EMail text as desired.
+.sp
+.SH "BUG REPORTS / BUG FIXES"
+\&
+.br
+.sp
+Send bug reports and bug fixes to:
+.sp
+.in +0.5i
+.nf
+calc-bugs at asthe dot com
+
+[[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+[[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
+.fi
+.in -0.5i
+.sp
+Your subject must contain the words:
+.sp
+.in +0.5i
+.nf
+calc bug report
+.fi
+.in -0.5i
+.sp
+You may have additional words in your subject line.
+.sp
 See the
 .I BUGS
 source file or use the
@@ -1037,7 +1089,7 @@ help bugs
 .sp
 for more information about bug reporting.
 .sp
-.SH "CALC WEB SITE / MAILING LIST"
+.SH "CALC WEB SITE"
 \&
 .br
 Landon Noll maintains the the
@@ -1045,32 +1097,7 @@ Landon Noll maintains the the
 web site is located at:
 .sp
 .in +0.5i
-http://reality.sgi.com/chongo/tech/comp/calc/
+www.isthe.com/chongo/tech/comp/calc/
 .in -0.5i
 .sp
-One may join the
-.B calc
-testing group by sending a request to:
-.sp
-.in +0.5i
-.nf
-calc-tester-request at postofc dot corp dot sgi dot com
-
-[[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
-.fi
-.in -0.5i
-.sp
-Your message body (not the subject) should consist of:
-.sp
-.in +0.5i
-.nf
-subscribe calc-tester address
-end
-name your_full_name
-.fi
-.in -0.5i
-.sp
-where "address" is your EMail address and "your_full_name"
-is your full name.
-.sp
 Share and Enjoy! :\-)

calc.spec.in

@@ -0,0 +1,116 @@
+#****h* calc/calc.spec.in
+#
+# calc.spec.in - template specfile for calc
+#
+# Copyright (C) 2003  Petteri Kettunen and Landon Curt Noll
+#
+# Calc is open software; you can redistribute it and/or modify it under
+# the terms of the version 2.1 of the GNU Lesser General Public License
+# as published by the Free Software Foundation.
+#
+# Calc is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU Lesser General
+# Public License for more details.
+#
+# A copy of version 2.1 of the GNU Lesser General Public License is
+# distributed with calc under the filename COPYING-LGPL.  You should have
+# received a copy with calc; if not, write to Free Software Foundation, Inc.
+# 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+#
+# @(#) $Revision: 29.12 $
+# @(#) $Id: calc.spec.in,v 29.12 2003/04/15 03:37:59 chongo Exp $
+# @(#) $Source: /usr/local/src/cmd/calc/RCS/calc.spec.in,v $
+#
+# Under source code control:	2003/02/16 20:21:39
+# File existed as early as:	2003
+#
+# calculator by David I. Bell with help/mods from others
+# Makefile by Petteri Kettunen with modifications from Landon Curt Noll
+
+# BUGS
+#  - Uninstalling calc and calc-devel leaves empty dirs /usr/include/calc
+#    and /usr/share/calc and its subdird. In case e.g. %{_includedir}/calc
+#    is defined in `%files devel' section, then rpmbuild complains that
+#    header files are defined twice - rpmbuild bug or bug in specfile conf???
+
+Summary: Arbitrary precision calculator.
+Name: calc
+Version: <<<PROJECT_VERSION>>>
+Release: 0
+Copyright: LGPL
+Group: Applications/Engineering
+Source: %{name}-%{version}.tar.gz
+URL: http://www.isthe.com/chongo/tech/comp/calc/index.html
+Requires: ncurses >= 5.2-26, readline >= 4.2, less >= 358
+BuildRequires: ncurses-devel >= 5.2-26, readline-devel >= 4.2
+BuildRoot: %{_tmppath}/%{name}-root
+
+%description
+Calc is arbitrary precision C-like arithmetic system that is a
+calculator, an algorithm prototyper and mathematical research
+tool. Calc comes with a rich set of builtin mathematical and
+programmatic functions.
+
+For the latest calc release, see the project home page:
+
+    http://www.isthe.com/chongo/tech/comp/calc/index.html
+
+%package devel
+Summary: Development files and documentation for calc.
+Group: Development/Libraries
+PreReq: %{name} = %{version}-%{release}
+
+%description devel
+This package contains the header files and static libraries for developing
+calc (arbitrary precision calculator).
+
+For the latest calc release, see the project home page:
+
+    http://www.isthe.com/chongo/tech/comp/calc/index.html
+
+%prep
+%setup -q
+
+%build
+make %{?_smp_mflags} T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 all chk
+
+%install
+rm -rf %{buildroot}
+mkdir -p %{buildroot}
+make T=%{buildroot} BINDIR=%{_bindir} LIBDIR=%{_libdir} CALC_SHAREDIR=%{_datadir}/%{name} CALC_INCDIR=%{_includedir}/calc MANDIR=%{_mandir}/man1 install
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-, root, root)
+%doc BUGS CHANGES COPYING COPYING-LGPL
+%{_bindir}/*
+%{_mandir}/man1/*
+%{_datadir}/%{name}/*/*
+%{_datadir}/%{name}/bindings
+%{_datadir}/%{name}/README
+%{_datadir}/%{name}/*.cal
+
+%files devel
+%defattr(-, root, root)
+%doc BUGS COPYING COPYING-LGPL LIBRARY
+%attr(644, root, root) %{_includedir}/calc/*
+%attr(644, root, root) %{_libdir}/*.a
+
+%changelog
+* Wed Feb 26 2003 Landon Curt Noll http://www.isthe.com/chongo
+- Release of calc-2.11.7-2
+- Fixed attributes on include and lib calc-devel files
+- Added BUGS to calc-devel as well as calc
+* Tue Feb 25 2003 Landon Curt Noll http://www.isthe.com/chongo
+- Release of calc-2.11.7-1
+- Require ncurses, readline and less to install.
+- Require ncurses-devel and readline-devel to build.
+* Tue Feb 18 2003 Landon Curt Noll http://www.isthe.com/chongo
+- Misc changes to fit local directory setup
+* Sun Feb 16 2003 Petteri Kettunen <petterik@users.sourceforge.net>
+- initial RPM build
+
+#****

calcerr.tbl

@@ -17,14 +17,14 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.1 $
-# @(#) $Id: calcerr.tbl,v 29.1 1999/12/14 09:15:35 chongo Exp $
+# @(#) $Revision: 29.4 $
+# @(#) $Id: calcerr.tbl,v 29.4 2001/04/10 22:06:46 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/calcerr.tbl,v $
 #
 # Under source code control:	1996/05/23 17:38:44
 # File existed as early as:	1996
 #
-# Share and enjoy!  :-)		http://reality.sgi.com/chongo/tech/comp/calc/
+# Share and enjoy!  :-)		http://www.isthe.com/chongo/tech/comp/calc/
 
 # This file is used to build calcerr.h include file.
 #
@@ -108,8 +108,8 @@ E_FGETSTR1	Non-file first argument for fgetstr
 E_FGETSTR2	File not open for reading for fgetstr
 E_FGETLINE1	Non-file  argument for fgetline
 E_FGETLINE2	File not open for reading for fgetline
-E_FGETWORD1	Non-file argument for fgetword
-E_FGETWORD2	File not open for reading for fgetword
+E_FGETFIELD1	Non-file argument for fgetfield
+E_FGETFIELD2	File not open for reading for fgetfield
 E_REWIND1	Non-file argument for rewind
 E_FILES		Non-integer argument for files
 E_PRINTF1	Non-string fmt argument for fprint
@@ -375,3 +375,21 @@ E_GD3		Infinite or too-large result for gd
 E_AGD3		Infinite or too-large result for agd
 E_POWER4	Too-large value for power
 E_ROOT4		Too-large value for root
+E_DGT1		Non-real first arg for digit
+E_DGT2		Non-integral second arg for digit
+E_DGT3		Bad third arg for digit
+E_PLCS1		Bad first argument for places
+E_PLCS2		Bad second argument for places
+E_DGTS1		Bad first argument for digits
+E_DGTS2		Bad second argument for digits
+E_ILOG		Bad first argument for ilog
+E_ILOGB		Bad second argument for ilog
+E_ILOG10	Bad argument for ilog10
+E_ILOG2		Bad argument for ilog2
+E_COMB1		Non-integer second arg for comb
+E_COMB2		Too-large second arg for comb
+E_CTLN		Bad argument for catalan
+E_BERN		Bad argument for bern
+E_EULER		Bad argument for euler
+E_SLEEP		Bad argument for sleep
+E_TTY		calc_tty failure

calcerr_c.awk

@@ -18,15 +18,15 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.1 $
-# @(#) $Id: calcerr_c.awk,v 29.1 1999/12/14 09:15:35 chongo Exp $
+# @(#) $Revision: 29.2 $
+# @(#) $Id: calcerr_c.awk,v 29.2 2000/06/07 14:02:13 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/calcerr_c.awk,v $
 #
 # Under source code control:	1996/05/24 03:15:35
 # File existed as early as:	1996
 #
-# chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-# Share and enjoy!  :-) http://reality.sgi.com/chongo/tech/comp/calc/
+# chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+# Share and enjoy!  :-) http://www.isthe.com/chongo/tech/comp/calc/
 #
 BEGIN {
     printf("#include <stdio.h>\n");

calcerr_c.sed

@@ -18,15 +18,15 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.1 $
-# @(#) $Id: calcerr_c.sed,v 29.1 1999/12/14 09:15:35 chongo Exp $
+# @(#) $Revision: 29.2 $
+# @(#) $Id: calcerr_c.sed,v 29.2 2000/06/07 14:02:13 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/calcerr_c.sed,v $
 #
 # Under source code control:	1996/05/24 03:15:35
 # File existed as early as:	1996
 #
-# chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-# Share and enjoy!  :-)		http://reality.sgi.com/chongo/tech/comp/calc/
+# chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+# Share and enjoy!  :-)		http://www.isthe.com/chongo/tech/comp/calc/
 #
 s/#.*//
 s/[	 ][	 ]*$//

calcerr_h.awk

@@ -18,15 +18,15 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.1 $
-# @(#) $Id: calcerr_h.awk,v 29.1 1999/12/14 09:15:35 chongo Exp $
+# @(#) $Revision: 29.2 $
+# @(#) $Id: calcerr_h.awk,v 29.2 2000/06/07 14:02:13 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/calcerr_h.awk,v $
 #
 # Under source code control:	1996/05/23 17:38:44
 # File existed as early as:	1996
 #
-# chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-# Share and enjoy!  :-) http://reality.sgi.com/chongo/tech/comp/calc/
+# chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+# Share and enjoy!  :-) http://www.isthe.com/chongo/tech/comp/calc/
 #
 BEGIN {
     ebase = 10000;

calcerr_h.sed

@@ -18,15 +18,15 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.1 $
-# @(#) $Id: calcerr_h.sed,v 29.1 1999/12/14 09:15:35 chongo Exp $
+# @(#) $Revision: 29.2 $
+# @(#) $Id: calcerr_h.sed,v 29.2 2000/06/07 14:02:13 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/calcerr_h.sed,v $
 #
 # Under source code control:	1996/05/23 17:38:44
 # File existed as early as:	1996
 #
-# chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-# Share and enjoy!  :-)		http://reality.sgi.com/chongo/tech/comp/calc/
+# chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+# Share and enjoy!  :-)		http://www.isthe.com/chongo/tech/comp/calc/
 #
 s/#.*//
 s/[	 ][	 ]*$//

check.awk

@@ -18,15 +18,15 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.1 $
-# @(#) $Id: check.awk,v 29.1 1999/12/14 09:15:35 chongo Exp $
+# @(#) $Revision: 29.2 $
+# @(#) $Id: check.awk,v 29.2 2000/06/07 14:02:13 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/RCS/check.awk,v $
 #
 # Under source code control:	1996/05/25 22:07:58
 # File existed as early as:	1996
 #
-# chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-# Share and enjoy!  :-)		http://reality.sgi.com/chongo/tech/comp/calc/
+# chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+# Share and enjoy!  :-)		http://www.isthe.com/chongo/tech/comp/calc/
 #
 # This awk script will print 3 lines before and after any non-blank line that
 # does not begin with a number.	 This allows the 'make debug' rule to remove

cmath.h

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: cmath.h,v 29.1 1999/12/14 09:15:35 chongo Exp $
+ * @(#) $Revision: 29.6 $
+ * @(#) $Id: cmath.h,v 29.6 2002/03/12 09:38:26 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/cmath.h,v $
  *
  * Under source code control:	1993/07/30 19:42:45
  * File existed as early as:	1993
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 
@@ -32,7 +32,11 @@
 #define __CMATH_H__
 
 
-#include "qmath.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "qmath.h"
+#else
+# include <calc/qmath.h>
+#endif
 
 
 /*
@@ -58,6 +62,7 @@ extern void cprintfr(COMPLEX *c);
 /*
  * Basic numeric routines.
  */
+
 extern COMPLEX *cadd(COMPLEX *c1, COMPLEX *c2);
 extern COMPLEX *csub(COMPLEX *c1, COMPLEX *c2);
 extern COMPLEX *cmul(COMPLEX *c1, COMPLEX *c2);
@@ -70,8 +75,8 @@ extern COMPLEX *cscale(COMPLEX *c, long i);
 extern COMPLEX *cshift(COMPLEX *c, long i);
 extern COMPLEX *csquare(COMPLEX *c);
 extern COMPLEX *cconj(COMPLEX *c);
-extern COMPLEX *creal(COMPLEX *c);
-extern COMPLEX *cimag(COMPLEX *c);
+extern COMPLEX *c_real(COMPLEX *c);
+extern COMPLEX *c_imag(COMPLEX *c);
 extern COMPLEX *cneg(COMPLEX *c);
 extern COMPLEX *cinv(COMPLEX *c);
 extern COMPLEX *cint(COMPLEX *c);
@@ -83,6 +88,7 @@ extern BOOL ccmp(COMPLEX *c1, COMPLEX *c2);
  * More complicated functions.
  */
 extern COMPLEX *cpowi(COMPLEX *c, NUMBER *q);
+extern NUMBER *cilog(COMPLEX *c, ZVALUE base);
 
 
 /*

codegen.c

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: codegen.c,v 29.1 1999/12/14 09:15:35 chongo Exp $
+ * @(#) $Revision: 29.8 $
+ * @(#) $Id: codegen.c,v 29.8 2004/02/23 05:39:35 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/codegen.c,v $
  *
  * Under source code control:	1990/02/15 01:48:13
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 
@@ -45,11 +45,15 @@
 #include "func.h"
 #include "conf.h"
 
+#if defined(_WIN32) && !defined(__CYGWIN__)
+# include <direct.h>
+#endif
+
 static BOOL rdonce;	/* TRUE => do not reread this file */
 
 FUNC *curfunc;
 
-static BOOL getfilename(char *name, BOOL msg_ok, BOOL *once);
+static int getfilename(char *name, BOOL *once);
 static BOOL getid(char *buf);
 static void getshowstatement(void);
 static void getfunction(void);
@@ -71,7 +75,7 @@ static void getsimplebody(void);
 static void getcondition(void);
 static void getmatargs(void);
 static void getelement(void);
-static void usesymbol(char *name, BOOL autodef);
+static void usesymbol(char *name, int autodef);
 static void definesymbol(char *name, int symtype);
 static void getcallargs(char *name);
 static void do_changedir(void);
@@ -90,9 +94,16 @@ static int getshiftexpr(void);
 static int getreference(void);
 static int getincdecexpr(void);
 static int getterm(void);
-static int getidexpr(BOOL okmat, BOOL autodef);
+static int getidexpr(BOOL okmat, int autodef);
 static long getinitlist(void);
 
+#define INDICALLOC 8
+
+static int quickindices[INDICALLOC];
+static int * newindices;
+static int * indices;
+static int maxindices;
+
 
 /*
  * Read all the commands from an input file.
@@ -116,6 +127,7 @@ getcommands(BOOL toplevel)
 	if (!toplevel)
 		enterfilescope();
 	for (;;) {
+		int i;
 		(void) tokenmode(TM_NEWLINES);
 		switch (gettoken()) {
 
@@ -133,49 +145,67 @@ getcommands(BOOL toplevel)
 			return;
 
 		case T_HELP:
-			if (!getfilename(name, FALSE, NULL)) {
-				strcpy(name, DEFAULTCALCHELP);
+			for (i=1;;i++) {
+				switch(getfilename(name, NULL)) {
+				case -1:
+					if(i == 1) {
+						strcpy(name, DEFAULTCALCHELP);
+						givehelp(name);
+					}
+					break;
+				case 0:
+					givehelp(name);
+					continue;
+				default:
+					break;
+				}
+				break;
 			}
-			givehelp(name);
 			break;
 
 		case T_READ:
-			if (!getfilename(name, TRUE, &rdonce))
-				break;
 			if (!allow_read) {
 				scanerror(T_NULL,
 				    "read command disallowed by -m mode\n");
 				break;
 			}
-			switch (opensearchfile(name,calcpath,CALCEXT,rdonce)) {
-			case 0:
-				getcommands(FALSE);
-				closeinput();
-				break;
-			case 1:
-				/* previously read and -once was given */
-				break;
-			case -2:
-				scanerror(T_NULL,
-					  "Maximum input depth reached");
-				break;
-			default:
-				scanerror(T_NULL, "Cannot open \"%s\"\n", name);
+			for (;;) {
+				if (getfilename(name, &rdonce))
+					break;
+				switch (opensearchfile(name,calcpath,
+						       CALCEXT,rdonce)) {
+				case 0:
+					getcommands(FALSE);
+					closeinput();
+					continue;
+				case 1:
+					/* prev read and -once was given */
+					continue;
+				case -2:
+					scanerror(T_NULL,
+						 "Maximum input depth reached");
+					break;
+				default:
+					scanerror(T_NULL,
+						  "Cannot open \"%s\"", name);
+					continue;
+				}
 				break;
 			}
 			break;
 
 		case T_WRITE:
-			if (!getfilename(name, TRUE, NULL))
-				break;
 			if (!allow_write) {
 				scanerror(T_NULL,
 				    "write command disallowed by -m mode\n");
 				break;
 			}
-			if (writeglobals(name))
+			if (getfilename(name, NULL))
+				break;
+			if (writeglobals(name)) {
 				scanerror(T_NULL,
 					  "Error writing \"%s\"\n", name);
+			}
 			break;
 
 		case T_CD:
@@ -497,9 +527,10 @@ getsimpledeclaration(int symtype)
 		switch (gettoken()) {
 			case T_SYMBOL:
 				rescantoken();
-				res = getonevariable(symtype);
-				if (res)
+				if (getonevariable(symtype)) {
+					res = 1;
 					addop(OP_POP);
+				}
 				continue;
 			case T_COMMA:
 				continue;
@@ -529,7 +560,7 @@ getonevariable(int symtype)
 			res = getonevariable(symtype);
 			definesymbol(name, symtype);
 			if (res) {
-				usesymbol(name, FALSE);
+				usesymbol(name, 0);
 				addop(OP_ASSIGNBACK);
 			}
 			return res;
@@ -892,7 +923,7 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 		return;
 
 	case T_ELSE:
-		scanerror(T_SEMICOLON, "ELSE without preceeding IF");
+		scanerror(T_SEMICOLON, "ELSE without preceding IF");
 		return;
 
 	case T_SHOW:
@@ -1021,7 +1052,6 @@ getobjdeclaration(int symtype)
 	int count;			/* number of elements */
 	int index;			/* current index */
 	int i;				/* loop counter */
-	int indices[MAXINDICES];	/* indices for elements */
 	int oldmode;
 
 	if (gettoken() != T_SYMBOL) {
@@ -1038,58 +1068,89 @@ getobjdeclaration(int symtype)
 	 * Read in the definition of the elements of the object.
 	 */
 	count = 0;
+	indices = quickindices;
+	maxindices = INDICALLOC;
+
 	oldmode = tokenmode(TM_DEFAULT);
+
 	for (;;) {
 		switch (gettoken()) {
-			case T_SYMBOL:
-				if (count == MAXINDICES) {
-					scanerror(T_SEMICOLON,
-						  "Too many elements in OBJ "
-						  "statement");
-					(void) tokenmode(oldmode);
-					return;
-				}
-				index = addelement(tokensymbol());
-				for (i = 0; i < count; i++) {
-					if (indices[i] == index) {
-						scanerror(T_SEMICOLON,
-						  "Duplicate element name "
-						  "\"%s\"", tokensymbol());
+		case T_SYMBOL:
+			if (count == maxindices) {
+				if (maxindices == INDICALLOC) {
+					maxindices += INDICALLOC;
+					newindices = (int *) malloc(maxindices *
+						sizeof(int));
+					if (newindices == NULL) {
+						scanerror(T_SEMICOLON, "Out of memory for indices malloc");
 						(void) tokenmode(oldmode);
 						return;
 					}
+					memcpy(newindices, quickindices,
+						INDICALLOC * sizeof(int));
+					indices = newindices;
+				} else {
+					maxindices += INDICALLOC;
+					newindices = (int *) realloc(indices,
+						maxindices * sizeof(int));
+					if (newindices == NULL) {
+						free(indices);
+						scanerror(T_SEMICOLON, "Out of memory for indices realloc");
+						(void) tokenmode(oldmode);
+						return;
+					}
+					indices = newindices;
 				}
-				indices[count++] = index;
-				if (gettoken() == T_COMMA)
-					continue;
-				rescantoken();
-				if (gettoken() != T_RIGHTBRACE) {
-					scanerror(T_SEMICOLON,
-						  "Bad object type definition");
+			}
+			index = addelement(tokensymbol());
+			for (i = 0; i < count; i++) {
+				if (indices[i] == index) {
+					if (indices != quickindices)
+						free(indices);
+					scanerror(T_SEMICOLON, "Duplicate element name \"%s\"", tokensymbol());
 					(void) tokenmode(oldmode);
 					return;
 				}
-				/*FALLTHRU*/
-			case T_RIGHTBRACE:
-				(void) tokenmode(oldmode);
-				if (defineobject(name, indices, count)) {
-					scanerror(T_NULL,
-				"Object type \"%s\" is already defined", name);
-					return;
-				}
-				getobjvars(name, symtype);
-				return;
-			case T_NEWLINE:
+			}
+			indices[count++] = index;
+			if (gettoken() == T_COMMA)
 				continue;
-			default:
-				scanerror(T_SEMICOLON,
-					  "Bad object type definition");
+			rescantoken();
+			if (gettoken() != T_RIGHTBRACE) {
+				if (indices != quickindices)
+					free(indices);
+				scanerror(T_SEMICOLON, "Bad object type definition");
 				(void) tokenmode(oldmode);
 				return;
+			}
+			/*FALLTHRU*/
+		case T_RIGHTBRACE:
+			(void) tokenmode(oldmode);
+			if (defineobject(name, indices, count)) {
+				if (indices != quickindices)
+					free(indices);
+				scanerror(T_NULL,
+				"Object type \"%s\" is already defined", name);
+				return;
+			}
+			if (indices != quickindices)
+				free(indices);
+			getobjvars(name, symtype);
+			return;
+		case T_NEWLINE:
+			continue;
+		default:
+			if (indices != quickindices)
+				free(indices);
+			scanerror(T_SEMICOLON, "Bad object type definition");
+				(void) tokenmode(oldmode);
+			return;
+
 		}
 	}
 }
 
+
 static void
 getoneobj(long index, int symtype)
 {
@@ -1098,11 +1159,11 @@ getoneobj(long index, int symtype)
 	if (gettoken() == T_SYMBOL) {
 		if (symtype == SYM_UNDEFINED) {
 			rescantoken();
-			(void) getidexpr(TRUE, TRUE);
+			(void) getidexpr(TRUE, 1);
 		} else {
 			symname = tokensymbol();
 			definesymbol(symname, symtype);
-			usesymbol(symname, FALSE);
+			usesymbol(symname, 0);
 		}
 		getoneobj(index, symtype);
 		addop(OP_ASSIGN);
@@ -1181,11 +1242,11 @@ getonematrix(int symtype)
 	if (gettoken() == T_SYMBOL) {
 		if (symtype == SYM_UNDEFINED) {
 			rescantoken();
-			(void) getidexpr(FALSE, TRUE);
+			(void) getidexpr(FALSE, 1);
 		} else {
 			name = tokensymbol();
 			definesymbol(name, symtype);
-			usesymbol(name, FALSE);
+			usesymbol(name, 0);
 		}
 		while (gettoken() == T_COMMA);
 		rescantoken();
@@ -1688,6 +1749,8 @@ getrelation(void)
 			rescantoken();
 			return type;
 	}
+	if (islvalue(type))
+		addop(OP_GETVALUE);
 	(void) getsum();
 	addop(op);
 	return EXPR_RVALUE;
@@ -1727,6 +1790,8 @@ getsum(void)
 				rescantoken();
 				return type;
 		}
+		if (islvalue(type))
+			addop(OP_GETVALUE);
 		(void) getproduct();
 		addop(op);
 		type = EXPR_RVALUE;
@@ -1756,6 +1821,8 @@ getproduct(void)
 				rescantoken();
 				return type;
 		}
+		if (islvalue(type))
+			addop(OP_GETVALUE);
 		(void) getorexpr();
 		addop(op);
 		type = EXPR_RVALUE;
@@ -1775,6 +1842,8 @@ getorexpr(void)
 
 	type = getandexpr();
 	while (gettoken() == T_OR) {
+		if (islvalue(type))
+			addop(OP_GETVALUE);
 		(void) getandexpr();
 		addop(OP_OR);
 		type = EXPR_RVALUE;
@@ -1806,6 +1875,8 @@ getandexpr(void)
 				rescantoken();
 				return type;
 		}
+		if (islvalue(type))
+			addop(OP_GETVALUE);
 		(void) getshiftexpr();
 		addop(op);
 		type = EXPR_RVALUE;
@@ -1858,6 +1929,8 @@ getshiftexpr(void)
 			rescantoken();
 			return type;
 	}
+	if (islvalue(type))
+		addop(OP_GETVALUE);
 	(void) getshiftexpr();
 	addop(op);
 	return EXPR_RVALUE;
@@ -2028,7 +2101,25 @@ getterm(void)
 
 		case T_SYMBOL:
 			rescantoken();
-			type = getidexpr(TRUE, FALSE);
+			type = getidexpr(TRUE, 0);
+			break;
+
+		case T_GLOBAL:
+			if (gettoken() != T_SYMBOL) {
+				scanerror(T_NULL, "Global id expected");
+				break;
+			}
+			rescantoken();
+			type = getidexpr(TRUE, T_GLOBAL);
+			break;
+
+		case T_LOCAL:
+			if (gettoken() != T_SYMBOL) {
+				scanerror(T_NULL, "Local id expected");
+				break;
+			}
+			rescantoken();
+			type = getidexpr(TRUE, T_LOCAL);
 			break;
 
 		case T_LEFTBRACKET:
@@ -2077,11 +2168,11 @@ getterm(void)
 /*
  * Read in an identifier expressions.
  * This is a symbol name followed by parenthesis, or by square brackets or
- * element refernces.  The symbol can be a global or a local variable name.
+ * element references.  The symbol can be a global or a local variable name.
  * Returns the type of expression found.
  */
 static int
-getidexpr(BOOL okmat, BOOL autodef)
+getidexpr(BOOL okmat, int autodef)
 {
 	int type;
 	char name[SYMBOLSIZE+1];	/* symbol name */
@@ -2091,18 +2182,19 @@ getidexpr(BOOL okmat, BOOL autodef)
 	if (!getid(name))
 		return type;
 	switch (gettoken()) {
-		case T_LEFTPAREN:
-			oldmode = tokenmode(TM_DEFAULT);
-			getcallargs(name);
-			(void) tokenmode(oldmode);
-			type = 0;
-			break;
-		case T_ASSIGN:
-			autodef = TRUE;
-			/* fall into default case */
-		default:
-			rescantoken();
-			usesymbol(name, autodef);
+	case T_LEFTPAREN:
+		oldmode = tokenmode(TM_DEFAULT);
+		getcallargs(name);
+		(void) tokenmode(oldmode);
+		type = 0;
+		break;
+	case T_ASSIGN:
+		if (autodef != T_GLOBAL && autodef != T_LOCAL)
+			autodef = 1;
+		/* fall into default case */
+	default:
+		rescantoken();
+		usesymbol(name, autodef);
 	}
 	/*
 	 * Now collect as many element references and matrix index operations
@@ -2110,27 +2202,27 @@ getidexpr(BOOL okmat, BOOL autodef)
 	 */
 	for (;;) {
 		switch (gettoken()) {
-			case T_LEFTBRACKET:
-				rescantoken();
-				if (!okmat)
-					return type;
-				getmatargs();
-				type = 0;
-				break;
-			case T_ARROW:
-				addop(OP_DEREF);
-				/*FALLTHRU*/
-			case T_PERIOD:
-				getelement();
-				type = 0;
-				break;
-			case T_LEFTPAREN:
-				scanerror(T_NULL,
-					  "Function calls not allowed "
-					  "as expressions");
-			default:
-				rescantoken();
+		case T_LEFTBRACKET:
+			rescantoken();
+			if (!okmat)
 				return type;
+			getmatargs();
+			type = 0;
+			break;
+		case T_ARROW:
+			addop(OP_DEREF);
+			/*FALLTHRU*/
+		case T_PERIOD:
+			getelement();
+			type = 0;
+			break;
+		case T_LEFTPAREN:
+			scanerror(T_NULL,
+				  "Function calls not allowed "
+				  "as expressions");
+		default:
+			rescantoken();
+			return type;
 		}
 	}
 }
@@ -2144,71 +2236,37 @@ getidexpr(BOOL okmat, BOOL autodef)
  *
  * given:
  *	name		filename to read
- *	msg_ok		TRUE => ok to print error messages
  *	once		non-NULL => set to TRUE of -once read
  */
-static BOOL
-getfilename(char *name, BOOL msg_ok, BOOL *once)
+static int
+getfilename(char *name, BOOL *once)
 {
 	STRING *s;
+	int i;
 
-	/* look at the next token */
 	(void) tokenmode(TM_NEWLINES | TM_ALLSYMS);
-	switch (gettoken()) {
-		case T_STRING:
-			s = findstring(tokenstring());
-			strcpy(name, s->s_str);
-			sfree(s);
-			break;
-		case T_SYMBOL:
-			strcpy(name, tokensymbol());
-			break;
-		default:
-			if (msg_ok)
-				scanerror(T_SEMICOLON, "Filename expected");
-			return FALSE;
-	}
-
-	/* determine if we care about a possible -once option */
-	if (once != NULL) {
-		/* we care about a possible -once option */
-		if (strcmp(name, "-once") == 0) {
-			/* -once option found */
-			*once = TRUE;
-			/* look for the filename */
-			switch (gettoken()) {
-				case T_STRING:
-					s = findstring(tokenstring());
-					strcpy(name, s->s_str);
-					sfree(s);
-					break;
-				case T_SYMBOL:
-					strcpy(name, tokensymbol());
-					break;
-				default:
-					if (msg_ok)
-						scanerror(T_SEMICOLON,
-						    "Filename expected");
-					return FALSE;
-			}
-		} else {
-			*once = FALSE;
+	for (i = 2; i > 0; i--) {
+		switch (gettoken()) {
+			case T_STRING:
+				s = findstring(tokenstring());
+				strcpy(name, s->s_str);
+				sfree(s);
+				break;
+			case T_SYMBOL:
+				strcpy(name, tokensymbol());
+				break;
+			default:
+				rescantoken();
+				return -1;
 		}
-	}
 
-	/* look at the next token */
-	switch (gettoken()) {
-		case T_SEMICOLON:
-		case T_NEWLINE:
-		case T_EOF:
-			break;
-		default:
-			if (msg_ok)
-				scanerror(T_SEMICOLON,
-				    "Missing semicolon after filename");
-			return FALSE;
+		if (i == 2 && once != NULL) {
+			if ((*once = !strcmp(name, "-once")))
+				continue;
+		}
+		break;
 	}
-	return TRUE;
+	return 0;
 }
 
 
@@ -2433,11 +2491,26 @@ definesymbol(char *name, int symtype)
  *
  * given:
  *	name		symbol name to be checked
- *	autodef		TRUE => define is symbol is not known
+ *	autodef		1 => define if symbol is not known
+ *			T_GLOBAL => get global, define if necessary
  */
 static void
-usesymbol(char *name, BOOL autodef)
+usesymbol(char *name, int autodef)
 {
+
+	if (autodef == T_GLOBAL) {
+			addopptr(OP_GLOBALADDR, (char *) addglobal(name, FALSE));
+			return;
+	}
+	if (autodef == T_LOCAL) {
+			if (symboltype(name) == SYM_PARAM) {
+				scanerror(T_COMMA,
+				  "Variable \"%s\" is already defined", name);
+				return;
+			}
+			addopone(OP_LOCALADDR, addlocal(name));
+			return;
+	}
 	switch (symboltype(name)) {
 		case SYM_LOCAL:
 			addopone(OP_LOCALADDR, (long) findlocal(name));
@@ -2544,24 +2617,25 @@ static void
 do_changedir(void)
 {
 	char *p;
+	STRING *s;
 
 	/* look at the next token */
 	(void) tokenmode(TM_NEWLINES | TM_ALLSYMS);
 
 	/* determine the new directory */
+	s = NULL;
 	switch (gettoken()) {
-	case T_NULL:
-	case T_NEWLINE:
-	case T_SEMICOLON:
-		p = home;
-		break;
-	default:
-		p = tokensymbol(); /* This is not enough XXX */
-		if (p == NULL) {
+		case T_STRING:
+			s = findstring(tokenstring());
+			p = s->s_str;
+			break;
+		case T_SYMBOL:
+			p = tokensymbol();
+			break;
+		default:
 			p = home;
-		}
-		break;
 	}
+
 	if (p == NULL) {
 		fprintf(stderr, "Cannot determine HOME directory\n");
 	}
@@ -2570,29 +2644,8 @@ do_changedir(void)
 	if (chdir(p)) {
 		perror(p);
 	}
-	return;
+	if (s != NULL)
+		sfree(s);
 }
 
 
-/*
- * getshellfile - process the contents of a shellfile
- */
-void
-getshellfile(char *shellfile)
-{
-	/*
-	 * treat the calc shell script as if we were reading it
-	 */
-	if (!allow_read) {
-		scanerror(T_NULL,
-		    "reading of calc shell script \"%s\" "
-		    "dislloaed by -m mode\n", shellfile);
-	} else if (opensearchfile(shellfile, NULL, NULL, FALSE) == 0) {
-		getcommands(FALSE);
-		closeinput();
-	} else {
-		scanerror(T_NULL,
-			  "Cannot open calc shell script \"%s\"\n", shellfile);
-	}
-	return;
-}

comfunc.c

@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: comfunc.c,v 29.1 1999/12/14 09:15:35 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: comfunc.c,v 29.3 2000/07/17 15:35:49 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/comfunc.c,v $
  *
  * Under source code control:	1990/02/15 01:48:13
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 
@@ -1007,7 +1007,7 @@ cpolar(NUMBER *q1, NUMBER *q2, NUMBER *epsilon)
 	long m, n;
 
 	if (qiszero(epsilon)) {
-		math_error("Zero epsilson for cpolar");
+		math_error("Zero epsilon for cpolar");
 		/*NOTREACHED*/
 	}
 	if (qiszero(q1))
@@ -1162,3 +1162,27 @@ cprintfr(COMPLEX *c)
 		zprintval(i->den, 0L, 0L);
 	}
 }
+
+
+NUMBER *
+cilog(COMPLEX *c, ZVALUE base)
+{
+	NUMBER *qr, *qi;
+
+	qr = qilog(c->real, base);
+	qi = qilog(c->imag, base);
+
+	if (qr == NULL) {
+		if (qi == NULL)
+			return NULL;
+		return qi;
+	}
+	if (qi == NULL)
+		return qr;
+	if (qrel(qr, qi) >= 0) {
+		qfree(qi);
+		return qr;
+	}
+	qfree(qr);
+	return qi;
+}

commath.c

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: commath.c,v 29.1 1999/12/14 09:15:35 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: commath.c,v 29.3 2002/03/12 09:38:26 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/commath.c,v $
  *
  * Under source code control:	1990/02/15 01:48:10
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 
@@ -381,7 +381,7 @@ cconj(COMPLEX *c)
  * Return the real part of a complex number.
  */
 COMPLEX *
-creal(COMPLEX *c)
+c_real(COMPLEX *c)
 {
 	COMPLEX *r;
 
@@ -400,7 +400,7 @@ creal(COMPLEX *c)
  * Return the imaginary part of a complex number as a real.
  */
 COMPLEX *
-cimag(COMPLEX *c)
+c_imag(COMPLEX *c)
 {
 	COMPLEX *r;
 

config.c

@@ -1,7 +1,7 @@
 /*
  * config - configuration routines
  *
- * Copyright (C) 1999  David I. Bell and Landon Curt Noll
+ * Copyright (C) 1999-2002  David I. Bell and Landon Curt Noll
  *
  * Primary author:  David I. Bell
  *
@@ -19,14 +19,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: config.c,v 29.2 1999/12/14 19:37:46 chongo Exp $
+ * @(#) $Revision: 29.12 $
+ * @(#) $Id: config.c,v 29.12 2004/02/23 05:59:50 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/config.c,v $
  *
  * Under source code control:	1991/07/20 00:21:56
  * File existed as early as:	1991
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 
@@ -51,6 +51,7 @@
 NAMETYPE configs[] = {
 	{"all",		CONFIG_ALL},
 	{"mode",	CONFIG_MODE},
+	{"mode2",	CONFIG_MODE2},
 	{"display",	CONFIG_DISPLAY},
 	{"epsilon",	CONFIG_EPSILON},
 	/*epsilonprec -- tied to epsilon not a configuration type*/
@@ -90,6 +91,8 @@ NAMETYPE configs[] = {
 	    {"ctrl-d",	CONFIG_CTRL_D},		/* alias for ctrl_d */
 	{"program",	CONFIG_PROGRAM},
 	{"basename",	CONFIG_BASENAME},
+	{"windows",	CONFIG_WINDOWS},
+	{"cygwin",	CONFIG_CYGWIN},
 	{"version",	CONFIG_VERSION},
 	{NULL,		0}
 };
@@ -100,6 +103,7 @@ NAMETYPE configs[] = {
  */
 CONFIG oldstd = {	/* backward compatible standard configuration */
 	MODE_INITIAL,		/* current output mode */
+	MODE2_INITIAL,		/* current secondary output mode */
 	20,			/* current output digits for float or exp */
 	NULL,	/* loaded in at startup - default error for real functions */
 	EPSILONPREC_DEFAULT,	/* binary precision of epsilon */
@@ -109,10 +113,10 @@ CONFIG oldstd = {	/* backward compatible standard configuration */
 	SQ_ALG2,		/* size of number to use square alg 2 */
 	POW_ALG2,		/* size of modulus to use REDC for powers */
 	REDC_ALG2,		/* size of modulus to use REDC algorithm 2 */
-	TRUE,			/* ok to print a tilde on aproximations */
+	TRUE,			/* ok to print a tilde on approximations */
 	TRUE,			/* ok to print tab before numeric values */
 	0,			/* quomod() default rounding mode */
-	2,			/* quotent // default rounding mode */
+	2,			/* quotient // default rounding mode */
 	0,			/* mod % default rounding mode */
 	24,			/* sqrt() default rounding mode */
 	24,			/* appr() default rounding mode */
@@ -132,27 +136,38 @@ CONFIG oldstd = {	/* backward compatible standard configuration */
 	0,			/* internal calc debug level */
 	3,			/* calc resource file debug level */
 	0,			/* user defined debug level */
-	TRUE,			/* print Quit or abort executed messages */
+	FALSE,			/* print Quit or abort executed messages */
 	CTRL_D_VIRGIN_EOF,	/* ^D only exits on virgin lines */
 	NULL,			/* our name */
 	NULL,			/* basename of our name */
+#if defined(_WIN32)
+	TRUE,			/* running under windows */
+#else
+	FALSE,			/* congrats, you are not using windows */
+#endif
+#if defined(__CYGWIN__)
+	TRUE,			/* compiled under cygwin */
+#else
+	FALSE,			/* not compiled with cygwin */
+#endif
 	NULL			/* version */
 };
 CONFIG newstd = {	/* new non-backward compatible configuration */
 	MODE_INITIAL,		/* current output mode */
-	10,			/* current output digits for float or exp */
+	MODE2_INITIAL,		/* current output mode */
+	20,			/* current output digits for float or exp */
 	NULL,	/* loaded in at startup - default error for real functions */
-	NEW_EPSILONPREC_DEFAULT,	/* binary precision of epsilon */
+	EPSILONPREC_DEFAULT,	/* binary precision of epsilon */
 	FALSE,			/* tracing flags */
 	MAXPRINT_DEFAULT,	/* number of elements to print */
 	MUL_ALG2,		/* size of number to use multiply alg 2 */
 	SQ_ALG2,		/* size of number to use square alg 2 */
 	POW_ALG2,		/* size of modulus to use REDC for powers */
 	REDC_ALG2,		/* size of modulus to use REDC algorithm 2 */
-	TRUE,			/* ok to print a tilde on aproximations */
+	TRUE,			/* ok to print a tilde on approximations */
 	TRUE,			/* ok to print tab before numeric values */
 	0,			/* quomod() default rounding mode */
-	0,			/* quotent // default rounding mode */
+	2,			/* quotient // default rounding mode */
 	0,			/* mod % default rounding mode */
 	24,			/* sqrt() default rounding mode */
 	24,			/* appr() default rounding mode */
@@ -161,7 +176,7 @@ CONFIG newstd = {	/* new non-backward compatible configuration */
 	24,			/* output default rounding mode */
 	24,			/* round()/bround() default rounding mode */
 	TRUE,			/* ok to print leading 0 before decimal pt */
-	1,			/* ok to print trailing 0's */
+	0,			/* ok to print trailing 0's */
 	MAXSCANCOUNT,		/* max scan errors before abort */
 	"; ",			/* normal prompt */
 	";; ",			/* prompt when inside multi-line input */
@@ -172,10 +187,20 @@ CONFIG newstd = {	/* new non-backward compatible configuration */
 	0,			/* internal calc debug level */
 	3,			/* calc resource file debug level */
 	0,			/* user defined debug level */
-	TRUE,			/* print Quit or abort executed messages */
+	FALSE,			/* print Quit or abort executed messages */
 	CTRL_D_VIRGIN_EOF,	/* ^D only exits on virgin lines */
 	NULL,			/* our name */
 	NULL,			/* basename of our name */
+#if defined(_WIN32)
+	TRUE,			/* running under windows */
+#else
+	FALSE,			/* congrats, you are not using windows */
+#endif
+#if defined(__CYGWIN__)
+	TRUE,			/* compiled under cygwin */
+#else
+	FALSE,			/* not compiled with cygwin */
+#endif
 	NULL			/* version */
 };
 CONFIG *conf = NULL;	/* loaded in at startup - current configuration */
@@ -201,6 +226,7 @@ static NAMETYPE modes[] = {
 	{"oct",		MODE_OCTAL},
 	{"binary",	MODE_BINARY},
 	{"bin",		MODE_BINARY},
+	{"off",		MODE2_OFF},
 	{NULL,		0}
 };
 
@@ -287,10 +313,11 @@ static NAMETYPE truth[] = {
 
 
 /*
- * declate static functions
+ * declare static functions
  */
 static long lookup_long(NAMETYPE *set, char *name);
 static char *lookup_name(NAMETYPE *set, long val);
+static int getlen(VALUE *vp, LEN *lp);
 
 
 /*
@@ -360,6 +387,26 @@ lookup_name(NAMETYPE *set, long val)
 }
 
 
+/*
+ * Check whether VALUE at vp is a LEN (32-bit signed integer) and if so,
+ * copy that integer to lp.
+ * Return: 1, 2, 0, or -1 XXX
+ */
+
+static int
+getlen(VALUE *vp, LEN *lp)
+{
+	if (vp->v_type != V_NUM || !qisint(vp->v_num))
+		return 1;
+	if (zge31b(vp->v_num->num))
+		return 2;
+	*lp = ztoi(vp->v_num->num);
+	if (*lp < 0)
+		return -1;
+	return 0;
+}
+
+
 /*
  * Set the specified configuration type to the specified value.
  * An error is generated if the type number or value is illegal.
@@ -370,6 +417,7 @@ setconfig(int type, VALUE *vp)
 	NUMBER *q;
 	CONFIG *newconf;	/* new configuration to set */
 	long temp;
+	LEN len;
 	char *p;
 
 	switch (type) {
@@ -414,15 +462,11 @@ setconfig(int type, VALUE *vp)
 		break;
 
 	case CONFIG_DISPLAY:
-		if (vp->v_type != V_NUM) {
-			math_error("Non-numeric for display");
+		if (getlen(vp, &len)) {
+			math_error("Bad value for display");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num))
-			temp = -1;
-		math_setdigits(temp);
+		math_setdigits(len);
 		break;
 
 	case CONFIG_MODE:
@@ -438,6 +482,19 @@ setconfig(int type, VALUE *vp)
 		math_setmode((int) temp);
 		break;
 
+	case CONFIG_MODE2:
+		if (vp->v_type != V_STR) {
+			math_error("Non-string for mode");
+			/*NOTREACHED*/
+		}
+		temp = lookup_long(modes, vp->v_str->s_str);
+		if (temp < 0) {
+			math_error("Unknown mode \"%s\"", vp->v_str);
+			/*NOTREACHED*/
+		}
+		math_setmode2((int) temp);
+		break;
+
 	case CONFIG_EPSILON:
 		if (vp->v_type != V_NUM) {
 			math_error("Non-numeric for epsilon");
@@ -447,91 +504,51 @@ setconfig(int type, VALUE *vp)
 		break;
 
 	case CONFIG_MAXPRINT:
-		if (vp->v_type != V_NUM) {
-			math_error("Non-numeric for maxprint");
+		if (getlen(vp, &len)) {
+			math_error("Bad value for maxprint");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num))
-			temp = -1;
-		if (temp < 0) {
-			math_error("Maxprint value is out of range");
-			/*NOTREACHED*/
-		}
-		conf->maxprint = temp;
+		conf->maxprint = len;
 		break;
 
 	case CONFIG_MUL2:
-		if (vp->v_type != V_NUM) {
-			math_error("Non-numeric for mul2");
+		if (getlen(vp, &len)) {
+			math_error("Bad value for mul2");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q))
-			temp = -1;
-		if (temp == 0)
-			temp = MUL_ALG2;
-		if (temp < 2) {
-			math_error("Illegal mul2 value");
-			/*NOTREACHED*/
-		}
-		conf->mul2 = (int)temp;
+		if (len == 0)
+			len = MUL_ALG2;
+		conf->mul2 = len;
 		break;
 
 	case CONFIG_SQ2:
-		if (vp->v_type != V_NUM) {
-			math_error("Non-numeric for sq2");
+		if (getlen(vp, &len)) {
+			math_error("Bad value for sq2");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q))
-			temp = -1;
-		if (temp == 0)
-			temp = SQ_ALG2;
-		if (temp < 2) {
-			math_error("Illegal sq2 value");
-			/*NOTREACHED*/
-		}
-		conf->sq2 = (int)temp;
+		if (len == 0)
+			len = SQ_ALG2;
+		conf->sq2 = len;
 		break;
 
 	case CONFIG_POW2:
-		if (vp->v_type != V_NUM) {
-			math_error("Non-numeric for pow2");
+		if (getlen(vp, &len)) {
+			math_error("Bad value for pow2");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q))
-			temp = -1;
-		if (temp == 0)
-			temp = POW_ALG2;
-		if (temp < 1) {
-			math_error("Illegal pow2 value");
-			/*NOTREACHED*/
-		}
-		conf->pow2 = (int)temp;
+		if (len == 0)
+			len = POW_ALG2;
+		conf->pow2 = len;
 		break;
 
 	case CONFIG_REDC2:
-		if (vp->v_type != V_NUM) {
-			math_error("Non-numeric for redc2");
+		if (getlen(vp, &len)) {
+			math_error("Bad value for redc2");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q))
-			temp = -1;
-		if (temp == 0)
-			temp = REDC_ALG2;
-		if (temp < 1) {
-			math_error("Illegal redc2 value");
-			/*NOTREACHED*/
-		}
-		conf->redc2 = (int)temp;
+		if (len == 0)
+			len = REDC_ALG2;
+		conf->redc2 = len;
 		break;
 
 	case CONFIG_TILDE:
@@ -563,129 +580,75 @@ setconfig(int type, VALUE *vp)
 		break;
 
 	case CONFIG_QUOMOD:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for quomod");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for quomod");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal quomod parameter value");
-			/*NOTREACHED*/
-		}
-		conf->quomod = temp;
+		conf->quomod = len;
 		break;
 
 	case CONFIG_QUO:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for quo");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for quo");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal quo parameter value");
-			/*NOTREACHED*/
-		}
-		conf->quo = temp;
+		conf->quo = len;
 		break;
 
 	case CONFIG_MOD:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for mod");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for mod");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal mod parameter value");
-			/*NOTREACHED*/
-		}
-		conf->mod = temp;
+		conf->mod = len;
 		break;
 
 	case CONFIG_SQRT:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for sqrt");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for sqrt");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal sqrt parameter value");
-			/*NOTREACHED*/
-		}
-		conf->sqrt = temp;
+		conf->sqrt = len;
 		break;
 
 	case CONFIG_APPR:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for appr");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for appr");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal appr parameter value");
-			/*NOTREACHED*/
-		}
-		conf->appr = temp;
+		conf->appr = len;
 		break;
 
 	case CONFIG_CFAPPR:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for cfappr");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for cfappr");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal cfappr parameter value");
-			/*NOTREACHED*/
-		}
-		conf->cfappr = temp;
+		conf->cfappr = len;
 		break;
 
 	case CONFIG_CFSIM:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for cfsim");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for cfsim");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal cfsim parameter value");
-			/*NOTREACHED*/
-		}
-		conf->cfsim = temp;
+		conf->cfsim = len;
 		break;
 
 	case CONFIG_OUTROUND:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for outround");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for outround");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal output parameter value");
-			/*NOTREACHED*/
-		}
-		conf->outround = temp;
+		conf->outround = len;
 		break;
 
 	case CONFIG_ROUND:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for round");
+		if (getlen(vp, &len)) {
+			math_error("Illegal value for round");
 			/*NOTREACHED*/
 		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || qisneg(q) || !zistiny(q->num)) {
-			math_error("Illegal output parameter value");
-			/*NOTREACHED*/
-		}
-		conf->round = temp;
+		conf->round = len;
 		break;
 
 	case CONFIG_LEADZERO:
@@ -898,11 +861,19 @@ setconfig(int type, VALUE *vp)
 		/*NOTREACHED*/
 
 	case CONFIG_BASENAME:
-		math_error("The program config parameter is read-only");
+		math_error("The basename config parameter is read-only");
+		/*NOTREACHED*/
+
+	case CONFIG_WINDOWS:
+		math_error("The windows config parameter is read-only");
+		/*NOTREACHED*/
+
+	case CONFIG_CYGWIN:
+		math_error("The cygwin config parameter is read-only");
 		/*NOTREACHED*/
 
 	case CONFIG_VERSION:
-		math_error("The program config parameter is read-only");
+		math_error("The version config parameter is read-only");
 		/*NOTREACHED*/
 
 	default:
@@ -1079,6 +1050,16 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		vp->v_str = makenewstring(p);
 		return;
 
+	case CONFIG_MODE2:
+		vp->v_type = V_STR;
+		p = lookup_name(modes, cfg->outmode2);
+		if (p == NULL) {
+			math_error("invalid secondary output mode: %d", cfg->outmode2);
+			/*NOTREACHED*/
+		}
+		vp->v_str = makenewstring(p);
+		return;
+
 	case CONFIG_EPSILON:
 		vp->v_num = qlink(cfg->epsilon);
 		return;
@@ -1104,20 +1085,18 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		break;
 
 	case CONFIG_TILDE:
-		vp->v_type = V_STR;
 		if (cfg->tilde_ok) {
-			vp->v_str = makenewstring(TRUE_STRING);
+			vp->v_num = itoq(1);
 		} else {
-			vp->v_str = makenewstring(FALSE_STRING);
+			vp->v_num = itoq(0);
 		}
 		return;
 
 	case CONFIG_TAB:
-		vp->v_type = V_STR;
 		if (cfg->tab_ok) {
-			vp->v_str = makenewstring(TRUE_STRING);
+			vp->v_num = itoq(1);
 		} else {
-			vp->v_str = makenewstring(FALSE_STRING);
+			vp->v_num = itoq(0);
 		}
 		return;
 
@@ -1158,20 +1137,18 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		break;
 
 	case CONFIG_LEADZERO:
-		vp->v_type = V_STR;
 		if (cfg->leadzero) {
-			vp->v_str = makenewstring(TRUE_STRING);
+			vp->v_num = itoq(1);
 		} else {
-			vp->v_str = makenewstring(FALSE_STRING);
+			vp->v_num = itoq(0);
 		}
 		return;
 
 	case CONFIG_FULLZERO:
-		vp->v_type = V_STR;
 		if (cfg->fullzero) {
-			vp->v_str = makenewstring(TRUE_STRING);
+			vp->v_num = itoq(1);
 		} else {
-			vp->v_str = makenewstring(FALSE_STRING);
+			vp->v_num = itoq(0);
 		}
 		return;
 
@@ -1194,11 +1171,10 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		break;
 
 	case CONFIG_BLKVERBOSE:
-		vp->v_type = V_STR;
 		if (cfg->blkverbose) {
-			vp->v_str = makenewstring(TRUE_STRING);
+			vp->v_num = itoq(1);
 		} else {
-			vp->v_str = makenewstring(FALSE_STRING);
+			vp->v_num = itoq(0);
 		}
 		return;
 
@@ -1235,11 +1211,10 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		break;
 
 	case CONFIG_VERBOSE_QUIT:
-		vp->v_type = V_STR;
 		if (cfg->verbose_quit) {
-			vp->v_str = makenewstring(TRUE_STRING);
+			vp->v_num = itoq(1);
 		} else {
-			vp->v_str = makenewstring(FALSE_STRING);
+			vp->v_num = itoq(0);
 		}
 		return;
 
@@ -1271,6 +1246,22 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		}
 		return;
 
+	case CONFIG_WINDOWS:
+		if (cfg->windows) {
+			vp->v_num = itoq(1);
+		} else {
+			vp->v_num = itoq(0);
+		}
+		return;
+
+	case CONFIG_CYGWIN:
+		if (cfg->cygwin) {
+			vp->v_num = itoq(1);
+		} else {
+			vp->v_num = itoq(0);
+		}
+		return;
+
 	case CONFIG_VERSION:
 		vp->v_type = V_STR;
 		if (cfg->version == NULL) {
@@ -1311,12 +1302,12 @@ config_cmp(CONFIG *cfg1, CONFIG *cfg2)
 	 */
 	if (cfg1 == NULL || cfg1->epsilon == NULL || cfg1->prompt1 == NULL ||
 	    cfg1->prompt2 == NULL) {
-		math_error("CONFIG #1 value is invaid");
+		math_error("CONFIG #1 value is invalid");
 		/*NOTREACHED*/
 	}
 	if (cfg2 == NULL || cfg2->epsilon == NULL || cfg2->prompt1 == NULL ||
 	    cfg2->prompt2 == NULL) {
-		math_error("CONFIG #2 value is invaid");
+		math_error("CONFIG #2 value is invalid");
 		/*NOTREACHED*/
 	}
 
@@ -1326,6 +1317,7 @@ config_cmp(CONFIG *cfg1, CONFIG *cfg2)
 	return cfg1->traceflags != cfg2->traceflags ||
 	       cfg1->outdigits != cfg2->outdigits ||
 	       cfg1->outmode != cfg2->outmode ||
+	       cfg1->outmode2 != cfg2->outmode2 ||
 	       qcmp(cfg1->epsilon, cfg2->epsilon) ||
 	       cfg1->epsilonprec != cfg2->epsilonprec ||
 	       cfg1->maxprint != cfg2->maxprint ||
@@ -1371,6 +1363,7 @@ config_cmp(CONFIG *cfg1, CONFIG *cfg2)
 
 	       (cfg1->version == NULL && cfg2->version != NULL) ||
 	       (cfg1->version != NULL && cfg2->version == NULL) ||
+	       cfg1->windows != cfg2->windows ||
 	       (cfg1->version != NULL && cfg2->version != NULL &&
 		strcmp(cfg1->version, cfg2->version) != 0);
 }

config.h

@@ -1,7 +1,7 @@
 /*
  * config - configuration routines
  *
- * Copyright (C) 1999  Landon Curt Noll and David I. Bell
+ * Copyright (C) 1999-2002  Landon Curt Noll and David I. Bell
  *
  * Primary author:  Landon Curt Noll
  *
@@ -19,15 +19,15 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.2 $
- * @(#) $Id: config.h,v 29.2 1999/12/14 19:37:46 chongo Exp $
+ * @(#) $Revision: 29.15 $
+ * @(#) $Id: config.h,v 29.15 2004/02/23 06:08:29 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/config.h,v $
  *
  * Under source code control:	1995/11/01 22:20:17
  * File existed as early as:	1995
  *
- * chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 
@@ -35,8 +35,15 @@
 #define __CONFIG_H__
 
 
-#include "nametype.h"
-#include "qmath.h"
+#if defined(CALC_SRC)	/* if we are building from the calc source tree */
+# include "win32dll.h"
+# include "nametype.h"
+# include "qmath.h"
+#else
+# include <calc/win32dll.h>
+# include <calc/nametype.h>
+# include <calc/qmath.h>
+#endif
 
 
 /*
@@ -71,17 +78,20 @@
 #define CONFIG_MORE	25
 #define CONFIG_BLKMAXPRINT 26
 #define CONFIG_BLKVERBOSE 27
-#define CONFIG_BLKBASE 28
-#define CONFIG_BLKFMT 29
+#define CONFIG_BLKBASE	28
+#define CONFIG_BLKFMT	29
 #define CONFIG_RESOURCE_DEBUG 30
 #define CONFIG_LIB_DEBUG CONFIG_RESOURCE_DEBUG
 #define CONFIG_CALC_DEBUG 31
 #define CONFIG_USER_DEBUG 32
 #define CONFIG_VERBOSE_QUIT 33
-#define CONFIG_CTRL_D 34
-#define CONFIG_PROGRAM 35
-#define CONFIG_BASENAME 36
-#define CONFIG_VERSION 37
+#define CONFIG_CTRL_D	34
+#define CONFIG_PROGRAM	35
+#define CONFIG_BASENAME	36
+#define CONFIG_VERSION	37
+#define CONFIG_WINDOWS	38
+#define CONFIG_MODE2	39
+#define CONFIG_CYGWIN	40
 
 
 /*
@@ -90,8 +100,6 @@
 #define DISPLAY_DEFAULT 20	/* default digits for float display */
 #define EPSILON_DEFAULT "1e-20" /* allowed error for float calculations */
 #define EPSILONPREC_DEFAULT 67	/* 67 ==> 2^-67 <= EPSILON_DEFAULT < 2^-66 */
-#define NEW_EPSILON_DEFAULT "1e-10"	/* newstd EPSILON_DEFAULT */
-#define NEW_EPSILONPREC_DEFAULT 34	/* 34 ==> 2^-34 <= 1e-10 < 2^-33 */
 #define MAXPRINT_DEFAULT 16	/* default number of elements printed */
 #define MAXSCANCOUNT 20		/* default max scan errors before an abort */
 
@@ -110,26 +118,27 @@
  */
 struct config {
 	int outmode;		/* current output mode */
-	long outdigits;		/* current output digits for float or exp */
+	int outmode2;		/* current secondary output mode */
+	LEN outdigits;		/* current output digits for float or exp */
 	NUMBER *epsilon;	/* default error for real functions */
 	    long epsilonprec;	/* epsilon binary precision (tied to epsilon) */
 	FLAG traceflags;	/* tracing flags */
-	long maxprint;		/* number of elements to print */
+	LEN maxprint;		/* number of elements to print */
 	LEN mul2;		/* size of number to use multiply algorithm 2 */
 	LEN sq2;		/* size of number to use square algorithm 2 */
 	LEN pow2;		/* size of modulus to use REDC for powers */
 	LEN redc2;		/* size of modulus to use REDC algorithm 2 */
 	BOOL tilde_ok;		/* ok to print a tilde on aproximations */
 	BOOL tab_ok;		/* ok to print tab before numeric values */
-	long quomod;		/* quomod() default rounding mode */
-	long quo;		/* quotent // default rounding mode */
-	long mod;		/* mod % default rounding mode */
-	long sqrt;		/* sqrt() default rounding mode */
-	long appr;		/* appr() default rounding mode */
-	long cfappr;		/* cfappr() default rounding mode */
-	long cfsim;		/* cfsim() default rounding mode */
-	long outround;		/* output default rounding mode */
-	long round;		/* round()/bround() default rounding mode */
+	LEN quomod;		/* quomod() default rounding mode */
+	LEN quo;		/* quotient // default rounding mode */
+	LEN mod;		/* mod % default rounding mode */
+	LEN sqrt;		/* sqrt() default rounding mode */
+	LEN appr;		/* appr() default rounding mode */
+	LEN cfappr;		/* cfappr() default rounding mode */
+	LEN cfsim;		/* cfsim() default rounding mode */
+	LEN outround;		/* output default rounding mode */
+	LEN round;		/* round()/bround() default rounding mode */
 	BOOL leadzero;		/* ok to print leading 0 before decimal pt */
 	BOOL fullzero;		/* ok to print trailing 0's */
 	long maxscancount;	/* max scan errors before abort */
@@ -146,6 +155,8 @@ struct config {
 	int ctrl_d;		/* see CTRL_D_xyz below */
 	char *program;		/* our name */
 	char *base_name;	/* basename of our name */
+	BOOL windows;		/* TRUE => running under MS windows */
+	BOOL cygwin;		/* TRUE => compiled with cygwin */
 	char *version;		/* calc version string */
 };
 typedef struct config CONFIG;
@@ -157,7 +168,8 @@ typedef struct config CONFIG;
 #define RSCDBG_STDIN_FUNC   (0x00000001)    /* interactive func define debug */
 #define RSCDBG_FILE_FUNC    (0x00000002)    /* file read func define debug */
 #define RSCDBG_FUNC_INFO    (0x00000004)    /* print extra info for show func */
-#define RSCDBG_MASK	    (0x00000007)
+#define RSCDBG_PRINT_DBG    (0x00000008)    /* print debug messages */
+#define RSCDBG_MASK	    (0x0000000f)
 
 
 /*
@@ -169,7 +181,8 @@ typedef struct config CONFIG;
 #define CALCDBG_BLOCK	    (0x00000008)    /* block debug */
 #define CALCDBG_TTY	    (0x00000010)    /* report TTY state changes */
 #define CALCDBG_RUNSTATE    (0x00000020)    /* report run_state changes */
-#define CALCDBG_MASK	    (0x0000003f)
+#define CALCDBG_RAND	    (0x00000040)    /* report rand() activity */
+#define CALCDBG_MASK	    (0x0000007f)
 
 /*
  * ctrl-d meanings
@@ -182,23 +195,23 @@ typedef struct config CONFIG;
 /*
  * global configuration states and aliases
  */
-extern CONFIG *conf;		/* current configuration */
-extern CONFIG oldstd;		/* backward compatible standard configuration */
-extern CONFIG newstd;		/* new non-backward compatible configuration */
-extern char *calc_debug;	/* !=NULL => value of config("calc_debug") */
-extern char *resource_debug;	/* !=NULL => config("resource_debug") value */
-extern char *user_debug;	/* !=NULL => value of config("user_debug") */
+extern DLL CONFIG *conf;	/* current configuration */
+extern DLL CONFIG oldstd;	/* old classic standard configuration */
+extern DLL CONFIG newstd;	/* default compatible configuration */
+extern DLL char *calc_debug;	/* !=NULL => value of config("calc_debug") */
+extern DLL char *resource_debug; /* !=NULL => config("resource_debug") value */
+extern DLL char *user_debug;	/* !=NULL => value of config("user_debug") */
 
 
 /*
  * configuration externals
  */
-extern CONFIG *config_copy(CONFIG *src);
-extern void config_free(CONFIG *cfg);
-extern void config_print(CONFIG *cfg);
-extern int configtype(char*);
-extern void config_print(CONFIG*);
-extern BOOL config_cmp(CONFIG*, CONFIG*);
+extern DLL CONFIG *config_copy(CONFIG *src);
+extern DLL void config_free(CONFIG *cfg);
+extern DLL void config_print(CONFIG *cfg);
+extern DLL int configtype(char*);
+extern DLL void config_print(CONFIG*);
+extern DLL BOOL config_cmp(CONFIG*, CONFIG*);
 
 
 #endif /* !__CONFIG_H__ */

const.c

@@ -17,14 +17,14 @@
  * received a copy with calc; if not, write to Free Software Foundation, Inc.
  * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  *
- * @(#) $Revision: 29.1 $
- * @(#) $Id: const.c,v 29.1 1999/12/14 09:15:35 chongo Exp $
+ * @(#) $Revision: 29.3 $
+ * @(#) $Id: const.c,v 29.3 2004/02/23 07:50:41 chongo Exp $
  * @(#) $Source: /usr/local/src/cmd/calc/RCS/const.c,v $
  *
  * Under source code control:	1990/02/15 01:48:14
  * File existed as early as:	before 1990
  *
- * Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+ * Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/
  */
 
 
@@ -34,7 +34,7 @@
 
 #define CONSTALLOCSIZE 400	/* number of constants to allocate */
 
-static long constcount;		/* number of constants defined */
+static unsigned long constcount;/* number of constants defined */
 static long constavail;		/* number of constants available */
 static NUMBER **consttable;	/* table of constants */
 
@@ -92,7 +92,7 @@ addqconstant(NUMBER *q)
 {
 	register NUMBER **tp;	/* pointer to current number */
 	register NUMBER *t;	/* number being tested */
-	long index;		/* index into constant table */
+	unsigned long index;	/* index into constant table */
 	long numlen;		/* numerator length */
 	long denlen;		/* denominator length */
 	HALF numlow;		/* bottom value of numerator */
@@ -221,7 +221,7 @@ trimconstants(void)
 void
 showconstants(void)
 {
-	long index;
+	unsigned long index;
 	NUMBER **qp;
 	long count;
 

cscript/4dsphere.calc

@@ -0,0 +1,320 @@
+#!/usr/local/src/cmd/calc/calc -q -s -f
+/*
+ * 4dsphere - determine if 6 points lie on the surface of a sphere in R^4
+ *
+ * usage:
+ *      4dsphere x0 y0 z0 w0 x1 y1 z1 w1 ... x5 y5 z5 w5
+ *
+ *      x0 y0 z0 w0	point 0 in R^4
+ *      x1 y1 z1 w1	point 1 in R^4
+ *	...		...
+ *      x5 y5 z5 w5	point 5 in R^4
+ *
+ * Copyright (C) 2001  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 1.3 $
+ * @(#) $Id: 4dsphere.calc,v 1.3 2001/06/06 09:06:29 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/4dsphere.calc,v $
+ *
+ * Under source code control:   2001/05/03 19:02:03
+ * File existed as early as:    2001
+ *
+ * chongo <was here> /\oo/\     http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)        http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+/*
+ * parse args
+ */
+argc = argv();
+if (argc != 25) {
+    fprintf(files(2), "usage: %s x0 y0 z0 w0 x1 y1 z1 w1 ... x5 y5 z5 w5\n",
+	argv(0));
+    exit;
+}
+x0 = eval(argv(1));
+y0 = eval(argv(2));
+z0 = eval(argv(3));
+w0 = eval(argv(4));
+x1 = eval(argv(5));
+y1 = eval(argv(6));
+z1 = eval(argv(7));
+w1 = eval(argv(8));
+x2 = eval(argv(9));
+y2 = eval(argv(10));
+z2 = eval(argv(11));
+w2 = eval(argv(12));
+x3 = eval(argv(13));
+y3 = eval(argv(14));
+z3 = eval(argv(15));
+w3 = eval(argv(16));
+x4 = eval(argv(17));
+y4 = eval(argv(18));
+z4 = eval(argv(19));
+w4 = eval(argv(20));
+x5 = eval(argv(21));
+y5 = eval(argv(22));
+z5 = eval(argv(23));
+w5 = eval(argv(24));
+
+/*
+ * verbose output setup
+ */
+print "(":x0:",":y0:",":z0:",":w0:") ":;
+print "(":x1:",":y1:",":z1:",":w1:") ":;
+print "(":x2:",":y2:",":z2:",":w2:") ":;
+print "(":x3:",":y3:",":z3:",":w3:") ":;
+print "(":x4:",":y4:",":z4:",":w4:") ":;
+print "(":x5:",":y5:",":z5:",":w5:") ":;
+
+/*
+ *
+ * Given the 5 points:
+ *
+ * 	(x0,y1,z1,w1)
+ * 	(x1,y1,z1,w1)
+ * 	(x2,y2,z2,w2)
+ * 	(x3,y3,z3,w3)
+ * 	(x4,y4,z4,w4)
+ * 	(x5,y5,z5,w5)
+ *
+ * we can determine if they lie in the surface of 4D sphere in R^4 if the
+ * following matrix is 0:
+ *
+ * 	| x0^2+y0^2+z0^2+w0^2	x0	y0	z0	w0	1 |
+ * 	| x1^2+y1^2+z1^2+w1^2	x1	y1	z1	w1	1 |
+ * 	| x2^2+y2^2+z2^2+w2^2	x2	y2	z2	w2	1 |	= 0
+ * 	| x3^2+y3^2+z3^2+w3^2	x3	y3	z3	w3	1 |
+ * 	| x4^2+y4^2+z4^2+w4^2	x4	y4	z4	w4	1 |
+ * 	| x5^2+y5^2+z5^2+w5^2	x5	y5	z5	w5	1 |
+ */
+if ((w0*(-x1*(-y2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    +y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +y5*(z4^2+y4^2+x4^2+w4^2) + (y4-y5)*(z3^2+y3^2+x3^2+w3^2))
+    -z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z2^2+y2^2+x2^2+w2^2)*(y4*z5+y3*(z4-z5) -y5*z4- (y4-y5)*z3) -
+    (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4)) +y1*(-x2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    +x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +x5*(z4^2+y4^2+x4^2+w4^2)
+    + (x4-x5)*(z3^2+y3^2+x3^2+w3^2)) -z3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) + (z2^2+y2^2+x2^2+w2^2)*(x4*z5+x3*(z4-z5)
+    -x5*z4- (x4-x5)*z3) - (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4))
+    -x2*(-y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4))
+    +y2*(-x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4)) -z1*(-x2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +y5*(z4^2+y4^2+x4^2+w4^2)
+    + (y4-y5)*(z3^2+y3^2+x3^2+w3^2)) +x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +x5*(z4^2+y4^2+x4^2+w4^2) + (x4-x5)*(z3^2+y3^2+x3^2+w3^2))
+    -y3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) -
+    (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2) + (x4*y5+x3*(y4-y5) -x5*y4-
+    (x4-x5)*y3)*(z2^2+y2^2+x2^2+w2^2)) -z2*(-x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) + (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2))
+    + (z1^2+y1^2+x1^2+w1^2)*(x2*(y4*z5+y3*(z4-z5) -y5*z4-
+    (y4-y5)*z3) -x3*(y4*z5-y5*z4) -y2*(x4*z5+x3*(z4-z5) -x5*z4-
+    (x4-x5)*z3) +y3*(x4*z5-x5*z4) - (x4*y5-x5*y4)*z3+
+    (x4*y5+x3*(y4-y5) -x5*y4- (x4-x5)*y3)*z2) +
+    (z2^2+y2^2+x2^2+w2^2)*(x3*(y4*z5-y5*z4) -y3*(x4*z5-x5*z4) +
+    (x4*y5-x5*y4)*z3)) -x0*(-w1*(-y2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    +y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +y5*(z4^2+y4^2+x4^2+w4^2) + (y4-y5)*(z3^2+y3^2+x3^2+w3^2))
+    -z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z2^2+y2^2+x2^2+w2^2)*(y4*z5+y3*(z4-z5) -y5*z4- (y4-y5)*z3) -
+    (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4)) -y1*(w2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    -w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +w5*(z4^2+y4^2+x4^2+w4^2)
+    + (w4-w5)*(z3^2+y3^2+x3^2+w3^2)) +z3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (z2^2+y2^2+x2^2+w2^2)*(-w4*z5-w3*(z4-z5)
+    +w5*z4+ (w4-w5)*z3) - (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5))
+    -w2*(-y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4))
+    -y2*(w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5)) +z1*(w2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +y5*(z4^2+y4^2+x4^2+w4^2)
+    + (y4-y5)*(z3^2+y3^2+x3^2+w3^2)) -w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +w5*(z4^2+y4^2+x4^2+w4^2) + (w4-w5)*(z3^2+y3^2+x3^2+w3^2))
+    +y3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) -
+    (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2) + (-w4*y5-w3*(y4-y5) +w5*y4+
+    (w4-w5)*y3)*(z2^2+y2^2+x2^2+w2^2)) +z2*(w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2))
+    + (z1^2+y1^2+x1^2+w1^2)*(w2*(y4*z5+y3*(z4-z5) -y5*z4-
+    (y4-y5)*z3) -w3*(y4*z5-y5*z4) +y2*(-w4*z5-w3*(z4-z5)
+    +w5*z4+ (w4-w5)*z3) -y3*(w5*z4-w4*z5) + (w5*y4-w4*y5)*z3-
+    (-w4*y5-w3*(y4-y5) +w5*y4+ (w4-w5)*y3)*z2) +
+    (z2^2+y2^2+x2^2+w2^2)*(w3*(y4*z5-y5*z4) +y3*(w5*z4-w4*z5) -
+    (w5*y4-w4*y5)*z3)) +y0*(-w1*(-x2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    +x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +x5*(z4^2+y4^2+x4^2+w4^2) + (x4-x5)*(z3^2+y3^2+x3^2+w3^2))
+    -z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z2^2+y2^2+x2^2+w2^2)*(x4*z5+x3*(z4-z5) -x5*z4- (x4-x5)*z3) -
+    (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4)) -x1*(w2*(-z4*(z5^2+y5^2+x5^2+w5^2)
+    -z3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +
+    (z4^2+y4^2+x4^2+w4^2)*z5+ (z3^2+y3^2+x3^2+w3^2)*(z4-z5))
+    -w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +w5*(z4^2+y4^2+x4^2+w4^2)
+    + (w4-w5)*(z3^2+y3^2+x3^2+w3^2)) +z3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (z2^2+y2^2+x2^2+w2^2)*(-w4*z5-w3*(z4-z5)
+    +w5*z4+ (w4-w5)*z3) - (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5))
+    -w2*(-x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4))
+    -x2*(w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5)) +z1*(w2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +x5*(z4^2+y4^2+x4^2+w4^2)
+    + (x4-x5)*(z3^2+y3^2+x3^2+w3^2)) -w3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) -x2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +w5*(z4^2+y4^2+x4^2+w4^2) + (w4-w5)*(z3^2+y3^2+x3^2+w3^2))
+    +x3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) -
+    (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2) + (-w4*x5-w3*(x4-x5) +w5*x4+
+    (w4-w5)*x3)*(z2^2+y2^2+x2^2+w2^2)) +z2*(w3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) -x3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2)) +
+    (z1^2+y1^2+x1^2+w1^2)*(w2*(x4*z5+x3*(z4-z5) -x5*z4- (x4-x5)*z3)
+    -w3*(x4*z5-x5*z4) +x2*(-w4*z5-w3*(z4-z5) +w5*z4+ (w4-w5)*z3)
+    -x3*(w5*z4-w4*z5) + (w5*x4-w4*x5)*z3- (-w4*x5-w3*(x4-x5) +w5*x4+
+    (w4-w5)*x3)*z2) + (z2^2+y2^2+x2^2+w2^2)*(w3*(x4*z5-x5*z4)
+    +x3*(w5*z4-w4*z5) - (w5*x4-w4*x5)*z3))
+    -w1*(-x2*(-y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4))
+    +y2*(-x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4)) -z2*(-x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) + (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2))
+    + (z2^2+y2^2+x2^2+w2^2)*(x3*(y4*z5-y5*z4)
+    -y3*(x4*z5-x5*z4) + (x4*y5-x5*y4)*z3))
+    +x1*(-w2*(-y3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(y4*z5-y5*z4))
+    -y2*(w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5)) +z2*(w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2))
+    + (z2^2+y2^2+x2^2+w2^2)*(w3*(y4*z5-y5*z4)
+    +y3*(w5*z4-w4*z5) - (w5*y4-w4*y5)*z3))
+    -y1*(-w2*(-x3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    +z3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2))
+    + (z3^2+y3^2+x3^2+w3^2)*(x4*z5-x5*z4))
+    -x2*(w3*((z4^2+y4^2+x4^2+w4^2)*z5-z4*(z5^2+y5^2+x5^2+w5^2))
+    -z3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (z3^2+y3^2+x3^2+w3^2)*(w5*z4-w4*z5)) +z2*(w3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) -x3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2))
+    + (z2^2+y2^2+x2^2+w2^2)*(w3*(x4*z5-x5*z4) +x3*(w5*z4-w4*z5)
+    - (w5*x4-w4*x5)*z3)) -z0*(-w1*(-x2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +y5*(z4^2+y4^2+x4^2+w4^2)
+    + (y4-y5)*(z3^2+y3^2+x3^2+w3^2)) +x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +x5*(z4^2+y4^2+x4^2+w4^2) + (x4-x5)*(z3^2+y3^2+x3^2+w3^2))
+    -y3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) -
+    (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2) + (x4*y5+x3*(y4-y5) -x5*y4-
+    (x4-x5)*y3)*(z2^2+y2^2+x2^2+w2^2)) -x1*(w2*(-y4*(z5^2+y5^2+x5^2+w5^2)
+    -y3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +y5*(z4^2+y4^2+x4^2+w4^2)
+    + (y4-y5)*(z3^2+y3^2+x3^2+w3^2)) -w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2)
+    +w5*(z4^2+y4^2+x4^2+w4^2) + (w4-w5)*(z3^2+y3^2+x3^2+w3^2))
+    +y3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) -
+    (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2) + (-w4*y5-w3*(y4-y5) +w5*y4+
+    (w4-w5)*y3)*(z2^2+y2^2+x2^2+w2^2)) -w2*(-x3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) +y3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) + (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2))
+    -x2*(w3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    -y3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2)) +y1*(w2*(-x4*(z5^2+y5^2+x5^2+w5^2)
+    -x3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +x5*(z4^2+y4^2+x4^2+w4^2)
+    + (x4-x5)*(z3^2+y3^2+x3^2+w3^2)) -w3*(x5*(z4^2+y4^2+x4^2+w4^2)
+    -x4*(z5^2+y5^2+x5^2+w5^2)) -x2*(-w4*(z5^2+y5^2+x5^2+w5^2)
+    -w3*(-z5^2+z4^2-y5^2+y4^2-x5^2+x4^2-w5^2+w4^2) +w5*(z4^2+y4^2+x4^2+w4^2)
+    + (w4-w5)*(z3^2+y3^2+x3^2+w3^2)) +x3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) - (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2)
+    + (-w4*x5-w3*(x4-x5) +w5*x4+ (w4-w5)*x3)*(z2^2+y2^2+x2^2+w2^2))
+    +y2*(w3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2))
+    -x3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2)) + (w3*(x4*y5-x5*y4) +x3*(w5*y4-w4*y5)
+    - (w5*x4-w4*x5)*y3)*(z2^2+y2^2+x2^2+w2^2) + (w2*(x4*y5+x3*(y4-y5)
+    -x5*y4- (x4-x5)*y3) -w3*(x4*y5-x5*y4) +x2*(-w4*y5-w3*(y4-y5)
+    +w5*y4+ (w4-w5)*y3) -x3*(w5*y4-w4*y5) + (w5*x4-w4*x5)*y3-
+    (-w4*x5-w3*(x4-x5) +w5*x4+ (w4-w5)*x3)*y2)*(z1^2+y1^2+x1^2+w1^2))
+    +z1*(-w2*(-x3*(y5*(z4^2+y4^2+x4^2+w4^2) -y4*(z5^2+y5^2+x5^2+w5^2))
+    +y3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2)) +
+    (x4*y5-x5*y4)*(z3^2+y3^2+x3^2+w3^2)) -x2*(w3*(y5*(z4^2+y4^2+x4^2+w4^2)
+    -y4*(z5^2+y5^2+x5^2+w5^2)) -y3*(w5*(z4^2+y4^2+x4^2+w4^2)
+    -w4*(z5^2+y5^2+x5^2+w5^2)) + (w5*y4-w4*y5)*(z3^2+y3^2+x3^2+w3^2))
+    +y2*(w3*(x5*(z4^2+y4^2+x4^2+w4^2) -x4*(z5^2+y5^2+x5^2+w5^2))
+    -x3*(w5*(z4^2+y4^2+x4^2+w4^2) -w4*(z5^2+y5^2+x5^2+w5^2)) +
+    (w5*x4-w4*x5)*(z3^2+y3^2+x3^2+w3^2)) + (w3*(x4*y5-x5*y4)
+    +x3*(w5*y4-w4*y5) - (w5*x4-w4*x5)*y3)*(z2^2+y2^2+x2^2+w2^2)) +
+    (z0^2+y0^2+x0^2+w0^2)*(-w1*(x2*(y4*z5+y3*(z4-z5) -y5*z4- (y4-y5)*z3)
+    -x3*(y4*z5-y5*z4) -y2*(x4*z5+x3*(z4-z5) -x5*z4- (x4-x5)*z3)
+    +y3*(x4*z5-x5*z4) - (x4*y5-x5*y4)*z3+ (x4*y5+x3*(y4-y5) -x5*y4-
+    (x4-x5)*y3)*z2) +x1*(w2*(y4*z5+y3*(z4-z5) -y5*z4- (y4-y5)*z3)
+    -w3*(y4*z5-y5*z4) +y2*(-w4*z5-w3*(z4-z5) +w5*z4+ (w4-w5)*z3)
+    -y3*(w5*z4-w4*z5) + (w5*y4-w4*y5)*z3- (-w4*y5-w3*(y4-y5) +w5*y4+
+    (w4-w5)*y3)*z2) -w2*(x3*(y4*z5-y5*z4) -y3*(x4*z5-x5*z4) +
+    (x4*y5-x5*y4)*z3) +x2*(w3*(y4*z5-y5*z4) +y3*(w5*z4-w4*z5) -
+    (w5*y4-w4*y5)*z3) -y1*(w2*(x4*z5+x3*(z4-z5) -x5*z4- (x4-x5)*z3)
+    -w3*(x4*z5-x5*z4) +x2*(-w4*z5-w3*(z4-z5) +w5*z4+ (w4-w5)*z3)
+    -x3*(w5*z4-w4*z5) + (w5*x4-w4*x5)*z3- (-w4*x5-w3*(x4-x5) +w5*x4+
+    (w4-w5)*x3)*z2) -y2*(w3*(x4*z5-x5*z4) +x3*(w5*z4-w4*z5) -
+    (w5*x4-w4*x5)*z3) + (w3*(x4*y5-x5*y4) +x3*(w5*y4-w4*y5) -
+    (w5*x4-w4*x5)*y3)*z2+ (w2*(x4*y5+x3*(y4-y5) -x5*y4- (x4-x5)*y3)
+    -w3*(x4*y5-x5*y4) +x2*(-w4*y5-w3*(y4-y5) +w5*y4+ (w4-w5)*y3)
+    -x3*(w5*y4-w4*y5) + (w5*x4-w4*x5)*y3- (-w4*x5-w3*(x4-x5) +w5*x4+
+    (w4-w5)*x3)*y2)*z1) - (z1^2+y1^2+x1^2+w1^2)*(-w2*(x3*(y4*z5-y5*z4)
+    -y3*(x4*z5-x5*z4) + (x4*y5-x5*y4)*z3) +x2*(w3*(y4*z5-y5*z4)
+    +y3*(w5*z4-w4*z5) - (w5*y4-w4*y5)*z3) -y2*(w3*(x4*z5-x5*z4)
+    +x3*(w5*z4-w4*z5) - (w5*x4-w4*x5)*z3) + (w3*(x4*y5-x5*y4)
+    +x3*(w5*y4-w4*y5) - (w5*x4-w4*x5)*y3)*z2)) == 0) {
+    print "are in the surface of a 4D sphere";
+} else {
+    print "are NOT on a 4D sphere surface";
+}

cscript/Makefile

@@ -17,15 +17,15 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.4 $
-# @(#) $Id: Makefile,v 29.4 1999/12/17 11:30:35 chongo Exp $
+# @(#) $Revision: 29.23 $
+# @(#) $Id: Makefile,v 29.23 2003/01/14 01:58:18 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/Makefile,v $
 #
 # Under source code control:	1999/11/29 11:10:26
 # File existed as early as:	1999
 #
-# chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-# Share and enjoy!  :-) http://reality.sgi.com/chongo/tech/comp/calc/
+# chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+# Share and enjoy!  :-) http://www.isthe.com/chongo/tech/comp/calc/
 #
 # calculator by David I. Bell with help/mods from others
 # Makefile by Landon Curt Noll
@@ -36,15 +36,121 @@
 SHELL= /bin/sh
 MAKE_FILE = Makefile
 
+####
 # Normally, the upper level makefile will set these values.  We provide
 # a default here just in case you want to build from this directory.
+####
+
+# Where the system include (.h) files are kept
 #
-BINDIR= /usr/local/bin
-#BINDIR= /usr/bin
-#BINDIR= /usr/contrib/bin
+# For DJGPP, select:
 #
+#	INCDIR= /dev/env/DJDIR/include
+#
+# If in doubt, set:
+#
+#	INCDIR= /usr/include
+#
+
+#INCDIR= /usr/local/include
+#INCDIR= /dev/env/DJDIR/include
+INCDIR= /usr/include
+
+# where to install calc realted things
+#
+# ${BINDIR}		where to install calc binary files
+# ${LIBDIR}		where calc link library (*.a) files are installed
+# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# For DJGPP, select:
+#
+#	BINDIR= /dev/env/DJDIR/bin
+#	LIBDIR= /dev/env/DJDIR/lib
+#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+#
+# If in doubt, set:
+#
+#	BINDIR= /usr/bin
+#	LIBDIR= /usr/lib
+#	CALC_SHAREDIR= /usr/share/calc
+#
+#BINDIR= /usr/local/bin
+#BINDIR= /dev/env/DJDIR/bin
+BINDIR= /usr/bin
+
+#LIBDIR= /usr/local/lib
+#LIBDIR= /dev/env/DJDIR/lib
+LIBDIR= /usr/lib
+
+#CALC_SHAREDIR= /usr/local/lib/calc
+#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
+CALC_SHAREDIR= /usr/share/calc
+
+# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
+# ---------------------------------------------------------------
+# ${HELPDIR}		where the help directory is installed
+# ${CALC_INCDIR}	where the calc include files are installed
+# ${CUSTOMCALDIR}	where custom *.cal files are installed
+# ${CUSTOMHELPDIR}	where custom help files are installed
+# ${CUSTOMINCPDIR}	where custom .h files are installed
+# ${SCRIPTDIR}		where calc shell scripts are installed
+#
+# NOTE: The install rule prepends installation paths with $T, which
+#	by default is empty.  If $T is non-empty, then installation
+#	locations will be relative to the $T directory.
+#
+# If in doubt, set:
+#
+#	HELPDIR= ${CALC_SHAREDIR}/help
+#	CALC_INCDIR= ${INCDIR}/calc
+#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
+#	SCRIPTDIR= ${BINDIR}/cscript
+#
+HELPDIR= ${CALC_SHAREDIR}/help
+CALC_INCDIR= ${INCDIR}/calc
+CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
+CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
+CUSTOMINCDIR= ${CALC_INCDIR}/custom
 SCRIPTDIR= ${BINDIR}/cscript
 
+# T - top level directory under which calc will be installed
+#
+# The calc install is performed under $T, the calc build is
+# performed under /.	The purpose for $T is to allow someone
+# to install calc somewhere other than into the system area.
+#
+# For example, if:
+#
+#     BINDIR= /usr/bin
+#     LIBDIR= /usr/lib
+#     CALC_SHAREDIR= /usr/share/calc
+#
+# and if:
+#
+#     T= /var/tmp/testing
+#
+# Then the installation locations will be:
+#
+#     calc binary files:	/var/tmp/testing/usr/bin
+#     calc link library:	/var/tmp/testing/usr/lib
+#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
+#     ... etc ...		/var/tmp/testing/...
+#
+# If $T is empty, calc is installed under /, which is the same
+# top of tree for which it was built.  If $T is non-empty, then
+# calc is installed under $T, as if one had to chroot under
+# $T for calc to operate.
+#
+# If in doubt, use T=
+#
+T=
+
 # Makefile debug
 #
 # Q=@	do not echo internal makefile actions (quiet mode)
@@ -59,13 +165,14 @@ CHMOD= chmod
 SED= sed
 SORT= sort
 FMT= fmt
+CMP= cmp
 
 # The ${SCRIPT} list is the list of calc shell script files (without the .calc
 # extension) which will be installed.
 #
 # The ${SCRIPT_SRC} is built from ${SCRIPT} and has the .calc extensions.
 #
-# This list is prodiced by the detaillist rule when no WARNINGS are detected.
+# This list is produced by the detaillist rule when no WARNINGS are detected.
 # To add a script:
 #
 #	1) Name the file with a .calc filename extension
@@ -76,26 +183,36 @@ FMT= fmt
 #
 #		make detaillist
 #
-SCRIPT= mersenne piforever plus simple
+SCRIPT= 4dsphere fproduct mersenne piforever plus powerterm \
+	simple square
 
-SCRIPT_SRC= mersenne.calc piforever.calc plus.calc simple.calc
+SCRIPT_SRC= 4dsphere.calc fproduct.calc mersenne.calc \
+	piforever.calc plus.calc powerterm.calc simple.calc square.calc
 
 # These files are found (but not built) in the distribution
 #
 DISTLIST= ${SCRIPT_SRC} ${MAKE_FILE} README
 
-# These files are used to make (but not built) a calc .a library
+# These files are used to make (but not build) a calc .a library
 #
 CALCLIBLIST=
 
+# complete list of targets
+#
+# NOTE: This list MUST be co-ordinated with the ${CSCRIPT_TARGETS} variable
+#	in the upper level ../Makefile
+#
+CSCRIPT_TARGETS= ${SCRIPT}
+TARGETS= ${CSCRIPT_TARGETS}
+
 # The reason for this Makefile
 #
-all: ${SCRIPT} ${SCRIPT_SRC} .all
+all: ${TARGETS} .all
 
-# used by the upper level Makefile to determine of we have done all
+# used by the upper level Makefile to determine if we have done all
 #
 # NOTE: Due to bogus shells found on one common system we must have
-#	an non-emoty else clause for every if condition.  *sigh*
+#	a non-empty else clause for every if condition.  *sigh*
 #
 .all:
 	rm -f .all
@@ -112,9 +229,11 @@ all: ${SCRIPT} ${SCRIPT_SRC} .all
 ##
 
 distlist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
+	${Q}for i in ${DISTLIST} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo cscript/$$i; \
-	done | ${SORT}
+	    fi; \
+	done | LANG=C ${SORT}
 
 distdir:
 	${Q}echo cscript
@@ -125,24 +244,28 @@ calcliblist:
 #
 detaillist:
 	${Q}-(echo "xxxxxxx"; \
-	   for i in ${SCRIPT}; do \
+	   for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		if [ ! -f RCS/$$i.calc,v ]; then \
 		    echo "WARNING: $$i.calc not under RCS control" 1>&2; \
 		else \
 		    echo $$i; \
 		fi; \
-	done | ${SORT}) | ${FMT} -70 | \
+	    fi; \
+	done | LANG=C ${SORT}) | ${FMT} -70 | \
 	    ${SED} -e '1s/xxxxxxx/SCRIPT=/' -e '2,$$s/^/	/' \
 		   -e 's/$$/ \\/' -e '$$s/ \\$$//'
 	${Q}echo
 	${Q}-(echo "xxxxxxxxxxx"; \
-	   for i in ${SCRIPT}; do \
+	   for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		if [ ! -f RCS/$$i.calc,v ]; then \
 		    echo "WARNING: $$i.calc not under RCS control" 1>&2; \
 		else \
 		    echo $$i.calc; \
 		fi; \
-	done | ${SORT}) | ${FMT} -70 | \
+	    fi; \
+	done | LANG=C ${SORT}) | ${FMT} -70 | \
 	    ${SED} -e '1s/xxxxxxxxxxx/SCRIPT_SRC=/' -e '2,$$s/^/	/' \
 		   -e 's/$$/ \\/' -e '$$s/ \\$$//'
 
@@ -170,11 +293,13 @@ depend:
 	${Q}echo "# DO NOT DELETE THIS LINE -- make depend depends on it." > \
 		makedep.out
 	${Q}echo "" >> makedep.out
-	${Q}for i in ${SCRIPT}; do \
+	${Q}for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
 		echo "$$i: $$i.calc"; \
-		echo '	rm -f $$@'; \
-		echo '	$${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!$${BINDIR}/calc:" $$?>$$@'; \
-		echo '	$${CHMOD} +x $$@'; \
+		echo '	@rm -f $$@'; \
+		echo '	@$${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!$${BINDIR}/calc:" $$?>$$@'; \
+		echo '	@$${CHMOD} +x $$@'; \
+	    fi; \
 	done >> makedep.out
 	${Q}echo sample dependency list formed
 	${Q}echo forming new cscript/Makefile
@@ -184,7 +309,7 @@ depend:
 	${Q}echo "" >> Makefile
 	${Q}${SED} -n '3,$$p' makedep.out >> Makefile
 	-${Q}rm -f makedep.out
-	-${Q}if cmp -s Makefile.bak Makefile; then \
+	-${Q}if ${CMP} -s Makefile.bak Makefile; then \
 		echo 'sample Makefile was already up to date'; \
 		mv -f Makefile.bak Makefile; \
 	else \
@@ -199,49 +324,102 @@ depend:
 		fi; \
 	fi
 
+##
+#
+# rpm rules
+#
+##
+
+echo_inst_files:
+	${Q}for i in ${SCRIPT} /dev/null; do \
+	    if [ X"$$i" != X"/dev/null" ]; then \
+		echo __file__ ${SCRIPTDIR}/$$i; \
+	    fi; \
+	done
+
+##
+#
+# Utility rules
+#
+##
+
 clean:
 	-rm -f makedep.out
 
 clobber:
-	-rm -f ${SCRIPT}
+	-rm -f ${TARGETS}
 
 install: all
-	-${Q}if [ ! -d ${BINDIR} ]; then \
-		echo mkdir ${BINDIR}; \
-		mkdir ${BINDIR}; \
+	-${Q}if [ ! -d $T${BINDIR} ]; then \
+	    echo mkdir $T${BINDIR}; \
+	    mkdir $T${BINDIR}; \
+	    if [ ! -d "$T${BINDIR}" ]; then \
+		echo mkdir -p "$T${BINDIR}"; \
+		mkdir -p "$T${BINDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${BINDIR}; \
+	    ${CHMOD} 0755 $T${BINDIR}; \
 	else \
 	    true; \
 	fi
-	-${Q}if [ ! -d ${SCRIPTDIR} ]; then \
-		echo mkdir ${SCRIPTDIR}; \
-		mkdir ${SCRIPTDIR}; \
+	-${Q}if [ ! -d $T${SCRIPTDIR} ]; then \
+	    echo mkdir $T${SCRIPTDIR}; \
+	    mkdir $T${SCRIPTDIR}; \
+	    if [ ! -d "$T${SCRIPTDIR}" ]; then \
+		echo mkdir -p "$T${SCRIPTDIR}"; \
+		mkdir -p "$T${SCRIPTDIR}"; \
+	    fi; \
+	    echo ${CHMOD} 0755 $T${SCRIPTDIR}; \
+	    ${CHMOD} 0755 $T${SCRIPTDIR}; \
 	else \
 	    true; \
 	fi
-	${Q}for i in ${SCRIPT}; do \
-		echo rm -f ${SCRIPTDIR}/$$i; \
-		rm -f ${SCRIPTDIR}/$$i; \
-		echo cp $$i ${SCRIPTDIR}; \
-		cp $$i ${SCRIPTDIR}; \
-		echo ${CHMOD} 0555 ${SCRIPTDIR}/$$i; \
-		${CHMOD} 0555 ${SCRIPTDIR}/$$i; \
+	${Q}for i in ${SCRIPT} /dev/null; do \
+	    if [ "$$i" = "/dev/null" ]; then \
+		continue; \
+	    fi; \
+	    if ${CMP} -s $$i $T${SCRIPTDIR}/$$i; then \
+		true; \
+	    else \
+		rm -f $T${SCRIPTDIR}/$$i.new; \
+		cp -f $$i $T${SCRIPTDIR}/$$i.new; \
+		${CHMOD} 0555 $T${SCRIPTDIR}/$$i.new; \
+		mv -f $T${SCRIPTDIR}/$$i.new $T${SCRIPTDIR}/$$i; \
+		echo "installed $T${SCRIPTDIR}/$$i"; \
+	    fi; \
 	done
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.
 
+4dsphere: 4dsphere.calc
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
+fproduct: fproduct.calc
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 mersenne: mersenne.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 piforever: piforever.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 plus: plus.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
+powerterm: powerterm.calc
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
 simple: simple.calc
-	rm -f $@
-	${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
-	${CHMOD} +x $@
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@
+square: square.calc
+	@rm -f $@
+	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
+	@${CHMOD} +x $@

cscript/README

@@ -7,9 +7,10 @@ be useful!
 
 If you write something that you think is useful, please send it to:
 
-    calc-tester at postofc dot corp dot sgi dot com
+    calc-contrib at asthe dot com
 
-    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+    [[ NOTE: Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+    [[ NOTE: The EMail address uses 'asthe' and the web site URL uses 'isthe' ]]
 
 For more info, see:
 
@@ -18,6 +19,23 @@ For more info, see:
 
 =-=
 
+4dsphere
+
+    Determine if 6 points lie on the surface of a 4-dimensional sphere in R^4.
+
+    4dsphere x0 y0 z0 w0   x1 y1 z1 w1   ...   x5 y5 z5 w5
+
+	x0 y0 z0 w0     point 0 in R^4
+	x1 y1 z1 w1     point 1 in R^4
+	...             ...
+	x5 y5 z5 w5     point 5 in R^4
+
+
+fproduct filename term ...
+
+    Write the big Endian product of terms to a file.  Use - for stdout.
+
+
 mersenne exp
 
     Print the value of 2^exp-1.
@@ -33,6 +51,12 @@ plus arg ...
     Print the sum of 1 or more arguments.
 
 
+powerterm [base_limit] value
+
+    Print the value as a sum (or difference) of powers of integers up
+    to and including powers <= base_limit.  By default, base_limit is 10000.
+
+
 simple
 
     A trivial example of a calc shell script.
@@ -53,12 +77,12 @@ simple
 ## received a copy with calc; if not, write to Free Software Foundation, Inc.
 ## 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 ##
-## @(#) $Revision: 29.3 $
-## @(#) $Id: README,v 29.3 1999/12/17 10:34:54 chongo Exp $
+## @(#) $Revision: 29.10 $
+## @(#) $Id: README,v 29.10 2001/06/10 19:34:40 chongo Exp $
 ## @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/README,v $
 ##
 ## Under source code control:	1999/12/17 10:23:40
 ## File existed as early as:	1999
 ##
-## chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-## Share and enjoy!  :-)	http://reality.sgi.com/chongo/tech/comp/calc/
+## chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+## Share and enjoy!  :-)	http://www.isthe.com/chongo/tech/comp/calc/

cscript/fproduct.calc

@@ -0,0 +1,88 @@
+#!/usr/local/src/cmd/calc/calc -q -s -f
+/*
+ * fproduct - write the big Endian product of terms to a file
+ *
+ * usage:
+ *	fproduct filename term [term ...]
+ *
+ *	filename	where to write the product, use - for stdout
+ *	term ...	terms to multiply
+ *
+ * Copyright (C) 2001  Landon Curt Noll
+ *
+ * Calc is open software; you can redistribute it and/or modify it under
+ * the terms of the version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Calc is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
+ * Public License for more details.
+ *
+ * A copy of version 2.1 of the GNU Lesser General Public License is
+ * distributed with calc under the filename COPYING-LGPL.  You should have
+ * received a copy with calc; if not, write to Free Software Foundation, Inc.
+ * 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * @(#) $Revision: 29.2 $
+ * @(#) $Id: fproduct.calc,v 29.2 2001/06/06 09:06:29 chongo Exp $
+ * @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/fproduct.calc,v $
+ *
+ * Under source code control:   2001/04/07 20:13:11
+ * File existed as early as:    2001
+ *
+ * chongo <was here> /\oo/\     http://www.isthe.com/chongo/
+ * Share and enjoy!  :-)        http://www.isthe.com/chongo/tech/comp/calc/
+ */
+
+/*
+ * parse args
+ */
+argc = argv();
+if (argc < 2) {
+    fprintf(files(2), "usage: %s term [term ...]\n", argv(0));
+    exit;
+}
+filename = argv(1);
+
+
+/*
+ * build the product
+ */
+product = 1;
+for (i=2; i < argc; ++i) {
+    product *= eval(argv(i));
+}
+product = abs(product);
+
+
+/*
+ * open the file for writing, "-" is stdout
+ */
+if (filename == "-") {
+    fd = files(1);
+} else {
+    fd = fopen(filename, "w");
+    if (!isfile(fd)) quit "be2file: cannot open file for writing";
+}
+
+
+/*
+ * write the octets to the file
+ *
+ * The most significant bits of the integer become the first file octets.
+ */
+if (product > 0) {
+    octlen = int((highbit(product)+8) / 8);
+    for (i=octlen-1; i >= 0; --i) {
+	fputc(fd, char(product >> (i*8)));
+    }
+}
+
+
+/*
+ * cleanup
+ */
+if (filename != "-") {
+    fclose(fd);
+}

cscript/mersenne.calc

@@ -1,4 +1,4 @@
-#!/usr/local/src/cmd/calc/calc -S
+#!/usr/local/src/cmd/calc/calc -q -s -f
 #
 # mersenne - print the value of a mersenne number
 #
@@ -18,15 +18,15 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.1 $
-# @(#) $Id: mersenne.calc,v 29.1 1999/12/14 09:15:35 chongo Exp $
+# @(#) $Revision: 29.3 $
+# @(#) $Id: mersenne.calc,v 29.3 2000/12/15 14:56:54 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/mersenne.calc,v $
 #
 # Under source code control:	1999/11/30 00:09:01;
 # File existed as early as:	1999
 #
-# chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-# Share and enjoy!  :-) http://reality.sgi.com/chongo/tech/comp/calc/
+# chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+# Share and enjoy!  :-) http://www.isthe.com/chongo/tech/comp/calc/
 
 # usage:
 #	mersenne exp
@@ -35,13 +35,19 @@
 /*
  * parse args
  */
-if (argv() != 1) {
+if (argv() != 2) {
 	/* we include the name of this script in the error message */
 	fprintf(files(2), "usage: %s exp\n", config("program"));
 	abort "wrong number of args";
 }
 
+global n = eval(argv(1));
+
+if (!isint(n) || n <= 0) {
+	quit "Argument to be a positive integer";
+}
+
 /*
  * print the decimal value of 2^n-1
  */
-print "2^": argv(0) : "-1 =", 2^eval(argv(0))-1;
+print "2^": n : "-1 =", 2^n-1;

cscript/piforever.calc

@@ -1,4 +1,4 @@
-#!/usr/local/src/cmd/calc/calc -S
+#!/usr/local/src/cmd/calc/calc -q -f
 #
 # piforever - print digits of pi forever (or as long as your mem/cpu allow)
 #
@@ -18,15 +18,15 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.1 $
-# @(#) $Id: piforever.calc,v 29.1 1999/12/14 09:15:36 chongo Exp $
+# @(#) $Revision: 29.3 $
+# @(#) $Id: piforever.calc,v 29.3 2000/12/15 14:56:54 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/piforever.calc,v $
 #
 # Under source code control:	1999/11/30 00:11:36
 # File existed as early as:	1999
 #
-# chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-# Share and enjoy!  :-) http://reality.sgi.com/chongo/tech/comp/calc/
+# chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+# Share and enjoy!  :-) http://www.isthe.com/chongo/tech/comp/calc/
 
 # usage:
 #	piforever

cscript/plus.calc

@@ -1,4 +1,4 @@
-#!/usr/local/src/cmd/calc/calc -S
+#!/usr/local/src/cmd/calc/calc -q -s -f
 #
 # plus - add two or more arguments together
 #
@@ -18,15 +18,15 @@
 # received a copy with calc; if not, write to Free Software Foundation, Inc.
 # 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 #
-# @(#) $Revision: 29.1 $
-# @(#) $Id: plus.calc,v 29.1 1999/12/14 09:15:36 chongo Exp $
+# @(#) $Revision: 29.3 $
+# @(#) $Id: plus.calc,v 29.3 2000/12/15 14:56:54 chongo Exp $
 # @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/plus.calc,v $
 #
 # Under source code control:	1999/11/29 10:22:37
 # File existed as early as:	1999
 #
-# chongo <was here> /\oo/\	http://reality.sgi.com/chongo/
-# Share and enjoy!  :-) http://reality.sgi.com/chongo/tech/comp/calc/
+# chongo <was here> /\oo/\	http://www.isthe.com/chongo/
+# Share and enjoy!  :-) http://www.isthe.com/chongo/tech/comp/calc/
 
 # usage:
 #	plus val ...
@@ -35,19 +35,19 @@
 /*
  * parse args
  */
-if (argv() < 1) {
+if (argv() < 2) {
 	/* we include the name of this script in the error message */
 	fprintf(files(2), "usage: %s value ...\n", config("program"));
 	abort "not enough args";
 }
 
 /*
- * print the sum of the 2 args
+ * print the sum of the args
  *
  * Since args are strings, we must eval them before using them numerically.
  */
 sum = 0;
-for (i=0; i < argv(); ++i) {
+for (i=1; i < argv(); ++i) {
 	sum += eval(argv(i));
 }
 print sum;