Release calc version 2.11.0t10.1

BUGS

@@ -24,14 +24,16 @@ To be sure that your version of calc is up to date, check out:
 
 The calc web site is located at:
 
-	http://reality.sgi.com/chongo/tech/comp/calc
+	http://reality.sgi.com/chongo/tech/comp/calc/index.html
 
 =-=
 
 If you have tried all of the above and things still are not right,
 then it may be time to send in a bug report.  You can send bug reports to:
 
-    calc-tester@postofc.corp.sgi.com
+    calc-bugs at postofc dot corp dot sgi dot com
+
+    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
 
 When you send your report, please include the following information:
 
@@ -62,36 +64,17 @@ Stack traces from core dumps are useful to send as well.
 Send any comments, compiler warning messages, suggestions and most
 importantly, fixes (in the form of a context diff patch) to:
 
-    calc-tester@postofc.corp.sgi.com
+    calc-tester at postofc dot corp dot sgi dot com
+
+    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+
+You should use the above calc-bugs address for bug reports, if you are
+not currently a member of the calc-tester mailing list.
 
 =-=
 
 Known bugs:
 
-    None reported.  We are sure some bugs exist.  When you find them,
-    please let us know!  See the above for details on how to report and
-    were to EMail your bug reports and hopefully patches to fix them.
-
-=-=
-
-Calc Mis-features:
-
-    * The following shell command (written in sh,ksh,bash-like form) works:
-
-	    calc '/*
-		   * comment
-		   */
-		  print 2+3;'
-
-      However this (also written in sh,ksh,bash-like form) does not work:
-
-	    echo '/*
-		   * comment
-		   */
-		  print 2+3;' | calc
-
-      The 2nd example will result in an 'Unterminated comment' error.
-
     * Calc does not support the #! exec method.	 For example of the
       following is placed in an executable file (assume the path to
       calc is correct) called /tmp/xyzzy:
@@ -105,3 +88,72 @@ Calc Mis-features:
       Will result in '"tmp" is undefined' and '"xyzzy" is undefined'
       error messages because calc considers $0 as an expression to
       evaluate.
+
+    * The following file:
+
+	    /* this is bugdemo.cal */
+	    x = eval(prompt(">>> "));
+	    print x;
+
+      when executed as:
+
+	    calc read bugdemo.cal
+
+      will obtain a prompt from the terminal, print the value but leave
+      the terminal in a 'bad' state, as if stty -icanon -echo -echoe
+      had been executed.
+
+    * Use of 'fmt' in the 2nd arg of printf() calls in c_sysinfo.c
+      cause some compilers to issue warnings.
+
+    We are sure some more bugs exist.  When you find them, please let
+    us know!  See the above for details on how to report and were to
+    EMail your bug reports and hopefully patches to fix them.
+
+=-=
+
+Other items of note:
+
+    * There is a bug in gcc-2.95 that causes calc, when compiled with -O2,
+      to fail the regression test.  The work-a-round is to compile with -O
+      or to use gcc-2.96 or later.
+
+    * There is a bug in some versions of the Dec/Compaq cc for the Alpha
+      where the following:
+
+	    #include <stdio.h>
+	    #define SVAL(a,b) (unsigned long)(0x ## a ## b ## ULL)
+	    main(){SVAL(b8a8aeb0,8168eadc);}
+
+      fails because it puts a space inside the concatenated hex.  Calc
+      has code that is affected by this bug.  This bug has been reported
+      to Compaq and may be fixed in the future.	 A work-a-round is to
+      compile with cc -std0 or to use a later version of their compiler.
+
+    * On a Digital UNIX V4.0F (Rev. 1229) on a 500 Mhz 21264, make check
+      dies a horrible death starting in test 600 and 622 gives 100s of
+      messages for calc version 2.11.0t9.4 using the Dec's cc with -O2:
+
+	600: Beginning test_bignums
+	601: muldivcheck 1
+	**** abc != acb: 602: muldivcheck 2
+	**** acb != bac: 602: muldivcheck 2
+	...
+	**** t4 != a4: 622: algcheck 1
+	**** t5 != a5: 622: algcheck 1
+	**** t6 != a6: 622: algcheck 1
+	**** t4 != a4: 622: algcheck 1
+	...
+
+	it finally hangs at test 2000.
+
+      The work-a-round is to compile calc without the optimizer.  If this
+      happens to you, try compiling without -O and without -O2.	 I.e., in
+      the Makefile, set:
+
+	DEBUG= -g
+
+    * The sparcv9 support for 64 bit Solaris under gcc-2.96 is able
+      to compile calc, but calc dumps core very early on in startup.
+      It is said that sparcv9 support in gcc-2.96 is very unofficial.
+      There is no work-a-round for this compile problem.

CHANGES

@@ -1,4 +1,256 @@
-Following is the change from calc version 2.11.0t8 to date:
+The following are the changes from calc version 2.11.0t10 to date:
+
+    Misc code cleanup.  Removed dead code.  Removed trailing whitespace.
+    Fixed whitespace to make the best use of 8 character tabs.
+
+    Fixed some bugs relaing to '// and %' in combination with some
+    of the the rounding modes based on a patch from Ernest Bowen
+    <ernie@turing.une.edu.au>.
+
+    A patch from Klaus Alexander Seistrup <klaus@seistrup.dk>, when
+    used in combination with the GNU-readline facility, will prevent
+    it from saving empty lines.
+
+
+The following are the changes from calc version 2.11.0t8.9.1 to 2.11.0t9.4.5:
+
+    The config("verbose_quit") will control the printing of the message:
+
+	    Quit or abort executed
+
+	when a non-interactive ABORT, QUIT or EXIT is encounted.  By default,
+	config("verbose_quit") is TRUE and the message is printed.  If one does:
+
+	    config("verbose_quit", 0)
+
+	the message is disabled.
+
+    Added 8400 regression test set and test8400.cal to test the new
+    quit and config("verbose_quit") functionality.
+
+    Fixed the BigEndian BASEB==16 regression bugs by correctly swapping
+    16 bit HALFs in a 64 bit value (such as a 64 bit file pointer).
+
+    Added calclevel() builtin to calculation level at which it is called.
+
+    Added help/calclevel and help/inputlevel help files.
+
+    Removed regression tests 951 and 5984 so that the regress test will
+    run in non-interactively / without a TTY such as under Debian's
+    build daemon.
+
+    The eval(str) builtin will return an error-value rather than cause
+    an execution error str has a scan-error.
+
+    Declarations are permitted to end with EOF as well as a newline or ';'.
+
+    When prompt() occurs while reading a file, it will take input from
+    the terminal rather than taking it from a file.  For example:
+
+	    /* This demonstrates the use of prompt() and some other things  */
+	    config("verbose_quit", 0);
+	    define getnumber() {
+		local x;
+		for (;;) {
+		    x = eval(prompt(">>> "));
+		    if (isnum(x))
+			return x;
+		    print "Not a number! Try again";
+		}
+	    }
+	    print "This will display the sqrt of each number you enter";
+	    print "Enter quit to stop";
+	    for (;;) {
+		print sqrt(getnumber());
+	    }
+	    print "Good bye";
+
+	Comments entered at input terminal level may be spread over several
+	lines.	For example:
+
+	    /*
+	     * Assume that this calc script is called: comment.cal
+	     * Then these commands now work:
+	     *	cat comment.cal | calc
+	     *	calc < comment.cal
+	     */
+	    print "Hello";
+
+    Added:
+
+	-D calc_debug[:lib_debug:[user_debug]]
+
+    to set the initial value of config("calc_debug"), config("lib_debug")
+    and config("user_debug").
+
+    The : separated strings of -D are interpreted as signed 32 bit values.
+    After an optional leading sign a leading zero indicates octal
+    conversion, and a leading ``0x'' or ``0X'' hexadecimal conversion.
+    Otherwise, decimal conversion is assumed.
+
+    Reordered the config structure moving calc_debug ahead of lib_debug.
+
+    Added bits 4 and 5 to config("calc_debug"):
+
+	4	Report on changes to the state of stdin as well as changes
+		to internal variables that control the setting and restoring
+		of stdin.
+
+	5	Report on changes to the run state of calc.
+
+    Fixed portability issue in seed.c relating to /dev/urandom and ustat.
+
+    Added a fix from Martin Buck <mb@netwings.ch> to detect when
+    calc aborts early instead of completing the regression test.
+    Now 'make chk' will require the last line of calc output to
+    end in the string ``Ending regression tests''.
+
+    Added a patch from Martin Buck <mb@netwings.ch> to allow use of
+    GNU-readline.  Note that GNU-readline is not shipped with calc.
+    His patch only provides the hooks to use it.  One must comment out:
+
+	    USE_READLINE=
+	    READLINE_LIB=
+	    READLINE_INCLUDE=
+
+	and comment in:
+
+	    USE_READLINE= -DUSE_READLINE
+	    READLINE_LIB= -lreadline -lhistory
+	    READLINE_INCLUDE= -I/usr/include/readline
+
+	in addition to pre-installing GNU-readline in your system to use
+	this facility.
+
+    Changed the "object already defined" math_error to a scanerror message.
+
+    Removed the limit on the number of object types.
+
+    Calc tarballs are now named calc-version.tar.gz and untar into
+    a sub-directory called calc-version.
+
+    Made a small change to declarations of static variables to reduce
+    the internal opcodes needed to declare them.
+
+    Fixed a permission problem on ranlib-ed *.a files that was reported
+    by Michael Somos <somos@grail.cba.csuohio.edu>.
+
+    Added patch by Klaus Alexander Seistrup <klaus@seistrup.dk> related
+    to GNU-readline:
+
+	+ enable calc specific bindings in ~/.inputrc
+	+ save a copy of your session to disk and reload them next
+	  time you're using calc
+	+ only add a line to the history if it is different from
+	  the previous line
+
+    Added the Makefile symbol HAVE_GETRUSAGE to determine if the
+    system supports the getrusage() system call.
+
+    Fixed the make depend code in the custom and sample Makefiles.
+
+    Fixed how the help/builtin file is formed.	The help/Makefile is
+    now given the name of the native C compiler by the top level Makefile.
+
+    The include files are installed under INCDIRCALC (a new Makefile variable)
+    which by default is ${INCDIR}/calc.	 The INCDIR (also a new Makefile var)
+    by default is /usr/local/include.  Include files previously installed
+    directly under ${LIBDIR} will be removed.
+
+    Added the piforever() funcion to lib/pi.cal.  It was written by
+    Klaus Alexander Seistrup <klaus@seistrup.dk> and was inspired by
+    an algorithm conceived by Lambert Meertens.	 (See also the ABC
+    Programmer's Handbook, by Geurts, Meertens & Pemberton, published
+    by Prentice-Hall (UK) Ltd., 1990.)	The piforever() funcion prints
+    digits of pi for as long as your memory and system uptime allows.  :-)
+
+    Fixed the URLs found thruout the source and documentation which did
+    not and in /, but should for performance and server load reasons.
+
+    Cleaned up and improved handling of "mat" and "obj".  The comma in:
+
+	    mat A[2], B[3];
+
+	is changed to whatever is appropriate in the context:
+
+	    + comma operator
+	    + separator of arguments in a function call
+	    + separator of arguments in a defintion
+	    etc.
+
+	The expression (mat A[2]), B[3] returns B[3], assuming B already
+	exists as something created by a statement like: global mat B[4].
+
+	What used to be done by the expression:
+
+	    mat A[2], B[3]
+
+	will now require something like:
+
+	    mat A[2], mat B[3]	or	A = mat[2], B = mat[3]
+
+	For example, if obj point and obj pair are known types, the
+	following is now allowed:
+
+	    L = list(mat[2], mat[3], obj point, obj pair)
+
+	As another example, the following is allowed:
+
+	    define f(a = mat[2] = {3,4}) = 5 * a;
+
+	as well as the following:
+
+	    obj point {x,y}, PP = obj pair {A,B} = {obj point, obj point}
+
+	which creates two object types at compile time and when executed,
+	assigns a pair-object value to a variable PP.
+
+    Fixed a bug whereby a for loop would behave incorrectly.  For example:
+
+	    config("trace", 2),
+	    global x;
+	    define f() {for ( ; x > 0; x--) {print x;}}
+	    x = 5, f()
+
+	will stop after printing 1 instead of looping forever.
+
+    Added values l_format, which when CHECK_L_FORMAT is defined ahead
+    of including longlong.h will help detect when a system can deal with
+    'long long' but not '%lld' in printf.  If a system with 'long long'
+    uses '%ld' to print a 64 bit value, then l_format will be > 0;
+    othewise if "%lld" is required, l_format will be < 0.
+
+    Added HAVE_STRDUP Makefile variable as well as the have_strdup.c
+    program that forms the have_strdup.h file.	The have_strdup.h file
+    will define HAVE_STRDUP is the system has strdup().	 If HAVE_STRDUP
+    is not defined, then calc will use calc_strdup() to simulate
+    the real strdup() function.
+
+    Calc no longer makes use of sys_errlist and sys_nerr.  Some systems
+    no longer suppor these values (even though they should from a
+    legacy prospective).  Calc now relies on the fact that strerror()
+    will return NULL of no such system error exists.  System errors >=
+    10000 will be considered calc errors instead.  The Makefile symbol
+    ERRNO_DECL has gone away as well as calc_errno.c and calc_errno.h.
+
+    System errors that are are not known to to the libc strerror()
+    function, will now print (via the strerror() calc builtin function)
+    something such as:
+
+	    Unknown error 9999
+
+    Fixed some insure code inspection tool issues that were discovered
+    and investigated by Michel van der List <vanderlistmj@sbphrd.com>.
+
+    Made an effort to ensure that the v_subtype of VALUES are initialized
+    to V_NOSUBTYPE thruout the source code.
+
+    Established a separate calc-bugs address from the calc-tester
+    maining list.  Using anti-spam address forms in order to try and
+    stay under the radar of spammers as much as one can do so.
+
+
+The following are the changes from calc version 2.11.0t8 to 2.11.0t8.9:
 
     Moved 'wishlist' enhancements from the help/todo file to a new
     help/wishlist file.	 Ordered, by priority, help/todo items into
@@ -26,8 +278,135 @@ Following is the change from calc version 2.11.0t8 to date:
 
     Fixed some of the old EMail addresses found in calc documentation.
 
+    Added HAVE_USTAT, HAVE_GETSID, HAVE_GETPGID, HAVE_GETTIME, HAVE_GETPRID
+    and HAVE_URANDOM symbols to the Makefile.  These symbols, along with
+    have_ustat.c, have_getsid.c, have_getpgid.c, have_gettime.c and
+    have_getprid.c form: have_ustat.h, have_getsid.h, have_getpgid.h,
+    have_gettime.h, have_getprid.h and have_urandom.h which in turn
+    are used by pseudo_seed() in seed.c to determine what types of
+    system services can be used to form a pseudo-random seed.
 
-Following is the change from calc version 2.11.0t7 to 2.11.0t7.5:
+    Fixed the way calc -c will continue processing $CALCRC when errors
+    are encountered.  Unless -d is also given, calc -c will report
+    when calc is unable to open a $CALCRC file.
+
+    Fixed the lower level make depend rules.
+
+    Misc cleanup on the have_*.c support source files.
+
+    Misc source file cleanup for things such as } else { style consistency.
+
+    Fixed the basis for FNV-1 hashes.  Piror to this fix, the hash()
+    builtin produced FNV hash values that did not match the FNV-1
+    algorithm as specified in:
+
+	http://reality.sgi.com/chongo/tech/comp/fnv/index.html
+
+    Removed an unused argument in the function getbody() in codegen.c.
+
+    Encountering of EOF in getbody() will cause a scanerror rather then
+    stop activity.  This will now result in a scanerror:
+
+	echo 'define f(x) { ' > myfile
+	calc -i read myfile
+
+    A '{' at the start of a command and a later matching '}' surrounding zero
+    or more statements (and possibly newlines) results in a function body to
+    be "evaluated".   This permits another command to follow on the same
+    line as the '}' as in:
+
+		{display(5)} read something;
+	and:
+		{static a = 5} define f(x) = a + x;
+
+    String constants can now be concatenated.  For exmaple:
+
+	s = "curds" ' and ' "whey";
+
+    Added FNV hash to the regression test suite.
+
+    Added Ernest Bowen's <ernie@turing.une.edu.au> fix for the
+    FNV regression test of the hash() builtin function.
+
+    Added Ernest Bowen's <ernie@turing.une.edu.au> patch to improve
+    the way config("calc_debug").  Now the lower 4 bits of the
+    config("calc_debug") parameter have the following meaning:
+
+       n	       Meaning of bit n of config("calc_debug")
+
+       0       Outputs shell commands prior to execution.
+
+       1       Outputs currently active functions when a quit instruction
+	       is executed.
+
+       2       Some details of shs, shs1 and md5 hash states are included
+	       in the output when these are printed.
+
+       3       When a function constructs a block value, tests are
+	       made that the result has the properties required for use of
+	       that block, e.g. that the pointer to the start of the
+	       block is not NULL, and that its "length" is not negative.
+	       A failure will result in a runtime error.
+
+    Changed the meaning of (config("calc_debug") & 1) from only printing
+    the shell commands (and pausing) while displaying help files into
+    the printing of any shell command prior to execution.
+
+    Documented the meaning of config("lib_debug"):
+
+	n		Meaning of bit n of config("lib_debug")
+
+	0	When a function is defined, redefined or undefined at
+		interactive level, a message saying what has been done
+		is displayed.
+
+	1	When a function is defined, redefined or undefined during
+		the reading of a file, a message saying what has been done
+		is displayed.
+
+	The value for config("lib_debug") in both oldstd and newstd is
+	3, but if calc is invoked with the -d flag, its initial value
+	is zero.  Thus, if calc is started without the -d flag, until
+	config("lib_debug") is changed, a message will be output when a
+	function is defined either interactively or during the reading
+	of a file.
+
+    Changed the calc lib files to reflect the new config("lib_debug")
+    bit field meaning.	Calc lib files that need to print extra information
+    should now do something such as:
+
+	if (config("lib_debug") & 3) {
+		print "obj xyz defined";
+		print "funcA([val1 [, val2]]) defined";
+		print "funcB(size, mass, ...) defined";
+	}
+
+    Fixed the help/custom_cal, help/new_custom, and help/copy files so
+    that they contain the correct contents instead of the 'usage' file.
+
+    Fixed problem with loss of bindings when calc -i args runs into
+    an error while processing 'args' and drops into interactive mode
+    without the terminal bindings being set.
+
+    Added patch from Ernest Bowen to extablish the abort command as
+    well as to clarify the roles of quit and exit.  See the help/command
+    file for details.
+
+    Updated to some extend, the help/statement and help/command help
+    files with new information about SHOW, QUIT, EXIT and ABORT.
+
+    Added show sizes to pzasusb8.cal.
+
+    Updated calc man page and help/usage file to reflect recent
+    command line changes.
+
+    Fixed a bug, reported by Michael Somos <somos@grail.cba.csuohio.edu>,
+    which prevented calc -m from being used.
+
+    Fixed misc compiler warnings.
+
+
+The following are the changes from calc version 2.11.0t7 to 2.11.0t7.5:
 
     Calc has some new command line flags / command line meaning:
     (Thanks goes to Ernest Bowen <ernie@turing.une.edu.au>)
@@ -170,12 +549,12 @@ Following is the change from calc version 2.11.0t7 to 2.11.0t7.5:
 
     The main calc URL is now:
 
-	http://reality.sgi.com/chongo/tech/comp/calc
+	http://reality.sgi.com/chongo/tech/comp/calc/
 
     Misc calc man page fixes.
 
 
-Following is the change from calc version 2.11.0t1 to 2.11.0t6.3:
+The following are the changes from calc version 2.11.0t1 to 2.11.0t6.3:
 
     Removed the makefile symbol MAIN.  Now forcing all functions to correctly
     be declared main.  To satisfy some old broken compilers, a return 0;
@@ -367,12 +746,12 @@ Following is the change from calc version 2.11.0t1 to 2.11.0t6.3:
     Fixed misc compile warnings and notices.
 
 
-Following is the change from calc version 2.10.3t5.38 to 2.11.0t0:
+The following are the changes from calc version 2.10.3t5.38 to 2.11.0t0:
 
     Fixed a few compile problems found under Red Hat 6.0 Linux.
 
 
-Following is the change from calc version 2.10.3t5.38 to 2.11.3t5.46:
+The following are the changes from calc version 2.10.3t5.38 to 2.11.3t5.46:
 
     Fixed a bug discovered by Ernest Bowen related to matrix-to-matrix copies.
 
@@ -429,7 +808,7 @@ Following is the change from calc version 2.10.3t5.38 to 2.11.3t5.46:
     into a single section.
 
 
-Following is the change from calc version 2.10.3t5.34 to 2.10.3t5.37:
+The following are the changes from calc version 2.10.3t5.34 to 2.10.3t5.37:
 
     Per request from David I Bell, the README line:
 
@@ -948,7 +1327,7 @@ Following is the change from calc version 2.10.3t5.34 to 2.10.3t5.37:
 	 user-specified bound.
 
 
-Following is the change from calc version 2.10.3t5.28 to 2.10.3t5.33:
+The following are the changes from calc version 2.10.3t5.28 to 2.10.3t5.33:
 
     Added hnrmod(v, h, n, r) builtin to compute:
 
@@ -1310,11 +1689,11 @@ Following is the change from calc version 2.10.3t5.28 to 2.10.3t5.33:
     Added regression tests related to saveval(), dot and pointers.
 
 
-Following is the change from calc version 2.10.3t5.11 to 2.10.3t5.27:
+The following are the changes from calc version 2.10.3t5.11 to 2.10.3t5.27:
 
     The todo help file as been updated with the in-progress items:
 
-	XXX - block print function is not written yet ...
+	xxx - block print function is not written yet ...
 
     Expanded the role of blk() to produce unnamed blocks as in:
 
@@ -1452,7 +1831,7 @@ Following is the change from calc version 2.10.3t5.11 to 2.10.3t5.27:
     where x was not 2^n-1 would leak memory.  This has been fixed.
 
 
-Following is the change from calc version 2.10.3t5.1 to 2.10.3t5.10:
+The following are the changes from calc version 2.10.3t5.1 to 2.10.3t5.10:
 
     Misc printf warning bug fixes.
 
@@ -1653,7 +2032,7 @@ Following is the change from calc version 2.10.3t5.1 to 2.10.3t5.10:
     regression tests for memsize(), sizeof() and size().
 
 
-Following is the change from calc version 2.10.3t4.16 to 2.10.3t5.0:
+The following are the changes from calc version 2.10.3t4.16 to 2.10.3t5.0:
 
     The calc source now comes with a custom sub-directory which
     contains the custom interface code.	 The main Makefile now
@@ -1845,7 +2224,7 @@ Following is the change from calc version 2.10.3t4.16 to 2.10.3t5.0:
     The max(), min() builtins work for lists.
 
 
-Following is the change from calc version 2.10.3t3 to 2.10.3t4.15:
+The following are the changes from calc version 2.10.3t3 to 2.10.3t4.15:
 
     The priority of unary + and - to that of binary + and - when they are
     applied to a first or only term.  Thus:
@@ -2021,7 +2400,7 @@ Following is the change from calc version 2.10.3t3 to 2.10.3t4.15:
     Fixed error in using cmdbuf("").
 
 
-Following is the change from calc version 2.10.3t0 to 2.10.3t2:
+The following are the changes from calc version 2.10.3t0 to 2.10.3t2:
 
     Bumped to version 2.10.3 due to the amount of changes.
 
@@ -2183,7 +2562,7 @@ Following is the change from calc version 2.10.3t0 to 2.10.3t2:
     SGI 6.2 and later uses -xansi.
 
 
-Following is the change from calc version 2.10.2t33 to 2.10.2t34:
+The following are the changes from calc version 2.10.2t33 to 2.10.2t34:
 
     Fixed a bug related to fact().
 
@@ -2260,7 +2639,7 @@ Following is the change from calc version 2.10.2t33 to 2.10.2t34:
 	http://www.latech.edu/~acm/HelloWorld.shtml
 
 
-Following is the change from calc version 2.10.2t25 to 2.10.2t32:
+The following are the changes from calc version 2.10.2t25 to 2.10.2t32:
 
     Eliminated use of VARARG and <varargs.h>.  Calc supports only
     <stdarg.h>.	 The VARARGS Makefile variable has been eliminated.
@@ -2444,7 +2823,7 @@ Following is the change from calc version 2.10.2t25 to 2.10.2t32:
     and file system permits.
 
 
-Following is the change from calc version 2.10.2t4 to 2.10.2t24:
+The following are the changes from calc version 2.10.2t4 to 2.10.2t24:
 
     Added makefile debugging rules:
 
@@ -2729,7 +3108,7 @@ Following is the change from calc version 2.10.2t4 to 2.10.2t24:
     SWAP_HALF_IN_OFF_T.
 
 
-Following is the change from calc version 2.10.2t1 to 2.10.2t3:
+The following are the changes from calc version 2.10.2t1 to 2.10.2t3:
 
     Fixed bug in the regression suite that made test3400 and test4100
     fail on correct computations.
@@ -2905,7 +3284,7 @@ Following is the change from calc version 2.10.2t1 to 2.10.2t3:
     treated as read-only.
 
 
-Following is the change from calc version 2.10.1t21 to 2.10.2t0:
+The following are the changes from calc version 2.10.1t21 to 2.10.2t0:
 
     Bumped patch level 2.10.2t0 in honor of having help files for
     all builtin functions.  Beta release will happen at the end of
@@ -2987,7 +3366,7 @@ Following is the change from calc version 2.10.1t21 to 2.10.2t0:
 	mat D[] = { }
 
 
-Following is the change from calc version 2.10.1t20 to 2.10.1t20:
+The following are the changes from calc version 2.10.1t20 to 2.10.1t20:
 
     Changes made in preparation for Blum Blum Shub random number generator.
 
@@ -3064,7 +3443,7 @@ Following is the change from calc version 2.10.1t20 to 2.10.1t20:
     <ernie@neumann.une.edu.au>
 
 
-Following is the change from calc version 2.10.1t11 to 2.10.1t19:
+The following are the changes from calc version 2.10.1t11 to 2.10.1t19:
 
     Added many more regression tests to lib/regress.cal.  Some
     due to <ernie@neumann.une.edu.au>.
@@ -3264,7 +3643,7 @@ Following is the change from calc version 2.10.1t11 to 2.10.1t19:
     Ha Lam <hl@kuhep5.phsx.ukans.edu>
 
 
-Following is the change from calc version 2.10.0t13 to 2.10.1t10:
+The following are the changes from calc version 2.10.0t13 to 2.10.1t10:
 
     Added SB8, USB8, SB16, USB16, SB32, USB32 typedefs, determined by
     longbits and declared in longbits.h, to deal with 8, 16 and 32 bit
@@ -3381,7 +3760,8 @@ Following is the change from calc version 2.10.0t13 to 2.10.1t10:
     digits or bits rather than places, e.g. round(.00238, 2, 32)
     returns .0023, round(.00238, 2, 56) returns .0024.
 
-Following is the change from calc version 2.9.3t11 to 2.10.0t12:
+
+The following are the changes from calc version 2.9.3t11 to 2.10.0t12:
 
     The default ${LIBDIR}/bindings CALCBINDINGS uses ^D for editing.
     The alternate CALCBINDINGS ${LIBDIR}/altbind uses ^D for EOF.
@@ -3435,7 +3815,8 @@ Following is the change from calc version 2.9.3t11 to 2.10.0t12:
     to provide a more extensive test suite for some builtin numeric
     functions.
 
-Following is the change from calc version 2.9.3t9.2+ to 2.9.3t10:
+
+The following are the changes from calc version 2.9.3t9.2+ to 2.9.3t10:
 
     Added many help files for builtin functions and some symbols.
     More help files are needed, see help/todo.
@@ -3538,7 +3919,8 @@ Following is the change from calc version 2.9.3t9.2+ to 2.9.3t10:
 	{
 	}
 
-Following is the change from calc version 2.9.3t8 to 2.9.3t9.2:
+
+The following are the changes from calc version 2.9.3t8 to 2.9.3t9.2:
 
     Use of the macro zisleone(z) has been clarified.  The zisleone(z) macro
     tests if z <= 1.  The macro zisabsleone(z) tests of z is 1, 0 or -1.
@@ -3746,7 +4128,8 @@ Following is the change from calc version 2.9.3t8 to 2.9.3t9.2:
 
     Fixed bug where reserved keyword used as symbol name caused a core dump.
 
-Following is the change from calc version 2.9.3t7 to 2.9.3t7:
+
+The following are the changes from calc version 2.9.3t7 to 2.9.3t7:
 
     The 'show' command by itself will issue an error message
     that will remind one of the possible show arguments.
@@ -3793,7 +4176,8 @@ Following is the change from calc version 2.9.3t7 to 2.9.3t7:
     Added utoz(), ztou() to zmath.c, and utoq(), qtou() to qmath.c
     in preparation for 2.9.3t9 mods.
 
-Following is the change from calc version 2.9.2 to 2.9.3t7:
+
+The following are the changes from calc version 2.9.2 to 2.9.3t7:
 
     Calc can now compile on OSF/1, SGI and IBM RS6000 systems.
 
@@ -3914,7 +4298,8 @@ Following is the change from calc version 2.9.2 to 2.9.3t7:
     Updated the help/todo list.	 A BUGS file was added.	 Volunteers are
     welcome to send in patches!
 
-Following is the change from calc version 2.9.1 to 2.9.1:
+
+The following are the changes from calc version 2.9.1 to 2.9.1:
 
     Fixed floor() for values -1 < x < 0.
 
@@ -3928,12 +4313,14 @@ Following is the change from calc version 2.9.1 to 2.9.1:
 
     Added more regression test code.
 
-Following is the change from calc version 2.9.0 to 2.9.0:
+
+The following are the changes from calc version 2.9.0 to 2.9.0:
 
     A major bug was fixed in subtracting two numbers when the first
     number was zero.  The problem caused wrong answers and core dumps.
 
-Following is a list of visible changes to calc from version 1.27.0 to 2.8.0:
+
+The following are the changes from calc version 1.27.0 to 2.8.0:
 
     Full prototypes have been provided for all C functions, and are used
     if calc is compiled with an ANSI compiler.

README

@@ -42,6 +42,7 @@ For overview of calc overview:
     > help define
     > help statement
     > help variable
+    > help usage
 
 For list of builtin functions:
 
@@ -73,7 +74,9 @@ for a wish/todo list.  Code contributions are welcome.
 
 To join the calc-tester mailing list.  Send a request to:
 
-     calc-tester-request@postofc.corp.sgi.com
+    calc-tester-request at postofc dot corp dot sgi dot com
+
+    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
 
 Your message body (not the subject) should consist of:
 
@@ -84,6 +87,14 @@ Your message body (not the subject) should consist of:
 where ``address'' is your EMail address and ``your_full_name'' is
 your full name.
 
+Calc bug reports, however should be sent to:
+
+    calc-bugs at postofc dot corp dot sgi dot com
+
+    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+
+but see the BUGS file first.
+
 The calc web site is located at:
 
-	http://reality.sgi.com/chongo/tech/comp/calc
+	http://reality.sgi.com/chongo/tech/comp/calc/

addop.c

@@ -114,6 +114,7 @@ beginfunc(char *name, BOOL newflag)
 	fp->f_localcount = 0;
 	fp->f_opcodecount = 0;
 	fp->f_savedvalue.v_type = V_NULL;
+	fp->f_savedvalue.v_subtype = V_NOSUBTYPE;
 	fp->f_name = namestr(&funcnames, newindex);
 	curfunc = fp;
 	initlocals();
@@ -164,8 +165,8 @@ endfunc(void)
 			size += dumpop(&fp->f_opcodes[size]);
 		}
 	}
-	if ((inputisterminal() && conf->lib_debug & 1) ||
-		(!inputisterminal() && conf->lib_debug & 2)) {
+	if ((inputisterminal() && conf->lib_debug & LIBDBG_STDIN_FUNC) ||
+		(!inputisterminal() && conf->lib_debug & LIBDBG_FILE_FUNC)) {
 		printf("%s(", fp->f_name);
 		for (index = 0; index <	 fp->f_paramcount; index++) {
 			if (index)
@@ -238,8 +239,8 @@ rmuserfunc(char *name)
 		return;
 	freenumbers(functions[index]);
 	free(functions[index]);
-	if ((inputisterminal() && conf->lib_debug & 1) ||
-			(!inputisterminal() && conf->lib_debug & 2))
+	if ((inputisterminal() && conf->lib_debug & LIBDBG_STDIN_FUNC) ||
+		    (!inputisterminal() && conf->lib_debug & LIBDBG_FILE_FUNC))
 		printf("%s() undefined\n", name);
 	functions[index] = NULL;
 }
@@ -534,8 +535,7 @@ addop(long op)
 				qfree(q);
 				fp->f_opcodes[count - 2] = OP_ZERO;
 				fp->f_opcodecount--;
-			}
-			else if (qisone(q)) {
+			} else if (qisone(q)) {
 				qfree(q);
 				fp->f_opcodes[count - 2] = OP_ONE;
 				fp->f_opcodecount--;
@@ -638,5 +638,3 @@ addoplabel(long op, LABEL *label)
 	addop(op);
 	uselabel(label);
 }
-
-/* END CODE */

align32.c

@@ -4,7 +4,7 @@
  * This file was written by:
  *
  *	Landon Curt Noll
- *	http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  *	chongo <was here> /\../\
  *

assocfunc.c

@@ -57,7 +57,7 @@ associndex(ASSOC *ap, BOOL create, long dim, VALUE *indices)
 	 * so that we can first select the correct hash chain, and
 	 * also so we can quickly compare each element for a match.
 	 */
-	hash = (QCKHASH)0;
+	hash = FNV1_32_BASIS;
 	for (i = 0; i < dim; i++)
 		hash = hashvalue(&indices[i], hash);
 
@@ -80,6 +80,7 @@ associndex(ASSOC *ap, BOOL create, long dim, VALUE *indices)
 	 */
 	if (!create) {
 		val.v_type = V_NULL;
+		val.v_subtype = V_NOSUBTYPE;
 		return &val;
 	}
 
@@ -244,8 +245,7 @@ assoccmp(ASSOC *ap1, ASSOC *ap2)
 			hash = ep1->e_hash;
 			dim = ep1->e_dim;
 			for (ep2 = ap2->a_table[hash % size2]; ;
-				ep2 = ep2->e_next)
-			{
+				ep2 = ep2->e_next) {
 				if (ep2 == NULL)
 					return TRUE;
 				if (ep2->e_hash != hash)
@@ -282,8 +282,7 @@ assoccopy(ASSOC *oldap)
 
 	for (oldhi = 0; oldhi < oldap->a_size; oldhi++) {
 		for (oldep = oldap->a_table[oldhi]; oldep;
-			oldep = oldep->e_next)
-		{
+			oldep = oldep->e_next) {
 			ep = (ASSOCELEM *) malloc(ELEMSIZE(oldep->e_dim));
 			if (ep == NULL) {
 				math_error("Cannot allocate association element");
@@ -292,6 +291,7 @@ assoccopy(ASSOC *oldap)
 			ep->e_dim = oldep->e_dim;
 			ep->e_hash = oldep->e_hash;
 			ep->e_value.v_type = V_NULL;
+			ep->e_value.v_subtype = V_NOSUBTYPE;
 			for (i = 0; i < ep->e_dim; i++)
 				copyvalue(&oldep->e_indices[i], &ep->e_indices[i]);
 			copyvalue(&oldep->e_value, &ep->e_value);
@@ -447,8 +447,7 @@ assocprint(ASSOC *ap, long max_print)
 		((ap->a_count == 1) ? "" : "s"));
 
 	for (index = 0; ((index < max_print) && (index < ap->a_count));
-		index++)
-	{
+		index++) {
 		ep = elemindex(ap, index);
 		if (ep == NULL)
 			continue;
@@ -489,5 +488,3 @@ compareindices(VALUE *v1, VALUE *v2, long dim)
 
 	return TRUE;
 }
-
-/* END CODE */

blkcpy.c

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By: Ernest Bowen and Landon Curt Noll
- *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo
+ *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo/
  */
 
 #include <stdio.h>
@@ -330,6 +330,7 @@ copyblk2mat(BLOCK *blk, long ssi, long num, MATRIX *dmat, long dsi)
 	i = num;
 	while (i-- > 0) {
 		vp->v_type = V_NUM;
+		vp->v_subtype = V_NOSUBTYPE;
 		vp->v_num = itoq((long) *op++);
 		vp++;
 	}

block.c

@@ -28,7 +28,7 @@
  * Happy bit twiddling,
  *
  *	Landon Curt Noll
- *	http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */
@@ -104,7 +104,7 @@ blkalloc(int len, int chunk)
 	/*
 	 * return BLOCK
 	 */
-	if (conf->calc_debug > 0) {
+	if (conf->calc_debug & CALCDBG_BLOCK) {
 		blkchk(nblk);
 	}
 	return nblk;
@@ -145,13 +145,11 @@ blk_free(BLOCK *blk)
  * debug time, we plan to call this function often.  Once we are satisfied,
  * we will normally call this code only in a few places.
  *
- * This function is normally called whenever the following builtins are called:
+ * If "calc_debug" has the bit corresponding to CALCDBG_BLOCK set, this
+ * function is called during execution of the following builtins:
  *
  *	alloc(), realloc(), free()
  *
- * unless the "calc_debug" is set to -1.  If "calc_debug" is > 0, then
- * most blk builtins will call this function.
- *
  * given:
  *	blk	- the BLOCK to check
  *
@@ -166,7 +164,7 @@ blkchk(BLOCK *blk)
 	/*
 	 * firewall - general sanity check
 	 */
-	if (conf->calc_debug == -1) {
+	if ((conf->calc_debug & CALCDBG_BLOCK) == 0) {
 		/* do nothing when debugging is disabled */
 		return;
 	}
@@ -231,7 +229,7 @@ blkrealloc(BLOCK *blk, int newlen, int newchunk)
 	/*
 	 * firewall
 	 */
-	if (conf->calc_debug != -1) {
+	if (conf->calc_debug & CALCDBG_BLOCK) {
 		blkchk(blk);
 	}
 
@@ -290,7 +288,7 @@ blkrealloc(BLOCK *blk, int newlen, int newchunk)
 			memset(blk->data, 0, blk->maxsize);
 		}
 		blk->datalen = 0;
-		if (conf->calc_debug > 0) {
+		if (conf->calc_debug & CALCDBG_BLOCK) {
 			blkchk(blk);
 		}
 		return blk;
@@ -321,7 +319,7 @@ blkrealloc(BLOCK *blk, int newlen, int newchunk)
 	/*
 	 * return realloced type
 	 */
-	if (conf->calc_debug > 0) {
+	if (conf->calc_debug & CALCDBG_BLOCK) {
 		blkchk(blk);
 	}
 	return blk;
@@ -349,7 +347,7 @@ blktrunc(BLOCK *blk)
 	/*
 	 * firewall
 	 */
-	if (conf->calc_debug != -1) {
+	if (conf->calc_debug & CALCDBG_BLOCK) {
 		blkchk(blk);
 	}
 
@@ -370,7 +368,7 @@ blktrunc(BLOCK *blk)
 		/*NOTREACHED*/
 	}
 	blk->data[0] = (USB8)0;
-	if (conf->calc_debug > 0) {
+	if (conf->calc_debug & CALCDBG_BLOCK) {
 		blkchk(blk);
 	}
 	return;
@@ -481,7 +479,7 @@ blk_print(BLOCK *blk)
 	BOOL havetail;
 	USB8 *ptr;
 
-	/* XXX - use the config parameters for better print control */
+	/* XXX - should use the config parameters for better print control */
 
 	printf("chunksize = %d, maxsize = %d, datalen = %d\n\t",
 		(int)blk->blkchunk, (int)blk->maxsize, (int)blk->datalen);
@@ -514,9 +512,9 @@ nblock_print(NBLOCK *nblk)
 		printf("chunksize = %d, maxsize = %d, datalen = %d\n\t",
 		(int)blk->blkchunk, (int)blk->maxsize, (int)blk->datalen);
 		printf("NULL");
-	}
-	else
+	} else {
 		blk_print(blk);
+	}
 }
 
 
@@ -558,8 +556,7 @@ reallocnblock(int id, int len, int chunk)
 			math_error("Allocation failed");
 			/*NOTREACHED*/
 		}
-	}
-	else if (newsize != oldsize) {
+	} else if (newsize != oldsize) {
 		newdata = realloc(blk->data, newsize);
 		if (newdata == NULL) {
 			math_error("Reallocation failed");

block.h

@@ -28,7 +28,7 @@
  * Happy bit twiddling,
  *
  *	Landon Curt Noll
- *	http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */

calc.c

@@ -39,8 +39,6 @@
 /*
  * static definitions and functions
  */
-static char *usage = "usage: %s [-c] [-C] [-d] [-e] [-h] [-i] [-m mode]\n"
-		     "\t[-n] [-p] [-q] [-u] [-v] [[--] calc_cmd ...]\n";
 static void intint(int arg);	/* interrupt routine */
 
 
@@ -55,13 +53,14 @@ main(int argc, char **argv)
 	extern char *optarg;	/* option argument */
 	extern int optind;	/* option index */
 	int c;			/* option */
+	char *p;
 	long i;
 
 	/*
 	 * parse args
 	 */
 	program = argv[0];
-	while ((c = getopt(argc, argv, "Cehim:npquvcd")) != -1) {
+	while ((c = getopt(argc, argv, "Cehim:npquvcdD:")) != -1) {
 		switch (c) {
 		case 'C':
 #if defined(CUSTOM)
@@ -87,7 +86,7 @@ main(int argc, char **argv)
 			i_flag = TRUE;
 			break;
 		case 'm':
-			if (optarg[1] == '\0' || *optarg<'0' || *optarg>'7') {
+			if (optarg[1] != '\0' || *optarg<'0' || *optarg>'7') {
 				/*
 				 * we are too early in processing to
 				 * call libcalc_call_me_last()
@@ -126,12 +125,36 @@ main(int argc, char **argv)
 			 */
 			printf("%s (version %s)\n", CALC_TITLE, version());
 			exit(0);
+		case 'D':
+			/*
+			 * parse the -D optarg
+			 *
+			 * Could be calc_debug
+			 *	 or calc_debug:lib_debug
+			 *	 or calc_debug:lib_debug:user_debug
+			 */
+			calc_debug = optarg;
+			p = strchr(optarg, ':');
+			if (p != NULL) {
+				*p = '\0';
+				lib_debug = p+1;
+				p = strchr(lib_debug, ':');
+				if (p != NULL) {
+					*p = '\0';
+					user_debug = p+1;
+				}
+			}
+			break;
 		default:
 			/*
 			 * we are too early in processing to call
 			 * libcalc_call_me_last() - nothing to cleanup
 			 */
-			fprintf(stderr, usage, program);
+			fprintf(stderr,
+			  "usage: %s [-c] [-C] [-d] [-e] [-h] [-i] [-m mode]\n"
+			  "\t[-D calc_debug[:lib_debug:[user_debug]]]\n"
+			  "\t[-n] [-p] [-q] [-u] [-v] [[--] calc_cmd ...]\n",
+			  program);
 			exit(1);
 		}
 	}
@@ -185,6 +208,8 @@ main(int argc, char **argv)
 	 */
 	libcalc_call_me_first();
 	stdin_tty = isatty(0);		/* assume stdin is on fd 0 */
+	if (conf->calc_debug & CALCDBG_TTY)
+		printf("DEBUG: stdin_tty is %d\n", stdin_tty);
 	if (want_defhelp) {
 		givehelp(DEFAULTCALCHELP);
 		libcalc_call_me_last();
@@ -239,9 +264,17 @@ main(int argc, char **argv)
 	 */
 	if (run_state == RUN_BEGIN) {
 		if (!q_flag && allow_read) {
+			if (conf->calc_debug & CALCDBG_RUNSTATE)
+				printf("DEBUG: run_state from %s to %s\n",
+				    run_state_name(run_state),
+				    run_state_name(RUN_RCFILES));
 			run_state = RUN_RCFILES;
 			runrcfiles();
 		}
+		if (conf->calc_debug & CALCDBG_RUNSTATE)
+			printf("DEBUG: run_state from %s to %s\n",
+			    run_state_name(run_state),
+			    run_state_name(RUN_PRE_CMD_ARGS));
 		run_state = RUN_PRE_CMD_ARGS;
 	}
 
@@ -249,24 +282,49 @@ main(int argc, char **argv)
 		fprintf(stderr, "Error in rcfiles\n");
 		if ((c_flag && !stoponerror) || stoponerror < 0) {
 			getcommands(FALSE);
+			if (inputlevel() == 0) {
 				closeinput();
-			if (inputisterminal())
+				runrcfiles();
+				if (conf->calc_debug & CALCDBG_RUNSTATE)
+				    printf("DEBUG: run_state from %s to %s\n",
+					run_state_name(run_state),
+					run_state_name(RUN_PRE_CMD_ARGS));
 				run_state = RUN_PRE_CMD_ARGS;
 			} else {
-			if ((havecommands && !i_flag) || !stdin_tty)
+				closeinput();
+			}
+		} else {
+			if ((havecommands && !i_flag) || !stdin_tty) {
+				if (conf->calc_debug & CALCDBG_RUNSTATE)
+				    printf("DEBUG: run_state from %s to %s\n",
+					run_state_name(run_state),
+					run_state_name(RUN_EXIT_WITH_ERROR));
 				run_state = RUN_EXIT_WITH_ERROR;
-			else
+			} else {
+				if (conf->calc_debug & CALCDBG_RUNSTATE)
+				    printf("DEBUG: run_state from %s to %s\n",
+					run_state_name(run_state),
+					run_state_name(RUN_PRE_CMD_ARGS));
 				run_state = RUN_PRE_CMD_ARGS;
 			}
 		}
+	}
 
 	if (run_state == RUN_PRE_CMD_ARGS) {
 		if (havecommands) {
+			if (conf->calc_debug & CALCDBG_RUNSTATE)
+				printf("DEBUG: run_state from %s to %s\n",
+				    run_state_name(run_state),
+				    run_state_name(RUN_CMD_ARGS));
 			run_state = RUN_CMD_ARGS;
 			(void) openstring(cmdbuf, (long) strlen(cmdbuf));
 			getcommands(FALSE);
 			closeinput();
 		}
+		if (conf->calc_debug & CALCDBG_RUNSTATE)
+			printf("DEBUG: run_state from %s to %s\n",
+			    run_state_name(run_state),
+			    run_state_name(RUN_PRE_TOP_LEVEL));
 		run_state = RUN_PRE_TOP_LEVEL;
 	}
 
@@ -274,22 +332,37 @@ main(int argc, char **argv)
 		fprintf(stderr, "Error in commands\n");
 		if ((c_flag && !stoponerror) || stoponerror < 0) {
 			getcommands(FALSE);
-			closeinput();
-			if (inputlevel() == 0) {
-				getcommands(FALSE);
+			if (inputlevel() == 0)
+				if (conf->calc_debug & CALCDBG_RUNSTATE)
+				    printf("DEBUG: run_state from %s to %s\n",
+					run_state_name(run_state),
+					run_state_name(RUN_PRE_TOP_LEVEL));
 				run_state = RUN_PRE_TOP_LEVEL;
-			}
+			closeinput();
 		} else {
 			closeinput();
-			if (!stdin_tty || !i_flag || p_flag)
+			if (!stdin_tty || !i_flag || p_flag) {
+				if (conf->calc_debug & CALCDBG_RUNSTATE)
+				    printf("DEBUG: run_state from %s to %s\n",
+					run_state_name(run_state),
+					run_state_name(RUN_EXIT_WITH_ERROR));
 				run_state = RUN_EXIT_WITH_ERROR;
-			else
+			} else {
+				if (conf->calc_debug & CALCDBG_RUNSTATE)
+				    printf("DEBUG: run_state from %s to %s\n",
+					run_state_name(run_state),
+					run_state_name(RUN_PRE_TOP_LEVEL));
 				run_state = RUN_PRE_TOP_LEVEL;
 			}
 		}
+	}
 
 	if (run_state == RUN_PRE_TOP_LEVEL) {
 		if (stdin_tty && ((havecommands && !i_flag) || p_flag)) {
+			if (conf->calc_debug & CALCDBG_RUNSTATE)
+				printf("DEBUG: run_state from %s to %s\n",
+				    run_state_name(run_state),
+				    run_state_name(RUN_EXIT));
 			run_state = RUN_EXIT;
 		} else {
 			if (stdin_tty) {
@@ -298,6 +371,10 @@ main(int argc, char **argv)
 				resetinput();
 				openterminal();
 			}
+			if (conf->calc_debug & CALCDBG_RUNSTATE)
+				printf("DEBUG: run_state from %s to %s\n",
+				    run_state_name(run_state),
+				    run_state_name(RUN_TOP_LEVEL));
 			run_state = RUN_TOP_LEVEL;
 			getcommands(TRUE);
 		}
@@ -313,6 +390,10 @@ main(int argc, char **argv)
 				reinitialize();
 				getcommands(TRUE);
 			} else {
+				if (conf->calc_debug & CALCDBG_RUNSTATE)
+				    printf("DEBUG: run_state from %s to %s\n",
+					run_state_name(run_state),
+					run_state_name(RUN_EXIT_WITH_ERROR));
 				run_state = RUN_EXIT_WITH_ERROR;
 			}
 		}

calc.h

@@ -14,6 +14,8 @@
 
 #include "value.h"
 
+#include "have_const.h"
+
 
 /*
  * Configuration definitions
@@ -38,7 +40,6 @@
 #define SYMBOLSIZE	256	/* maximum symbol name size */
 #define MAXINDICES	20	/* maximum number of indices for objects */
 #define MAXLABELS	100	/* maximum number of user labels in function */
-#define	MAXOBJECTS	128	/* maximum number of object types */
 #define MAXSTRING	1024	/* maximum size of string constant */
 #define MAXSTACK	1000	/* maximum depth of evaluation stack */
 #define MAXFILES	20	/* maximum number of opened files */
@@ -123,6 +124,7 @@ extern void resetinput(void);
 extern void setprompt(char *);
 extern BOOL inputisterminal(void);
 extern int inputlevel(void);
+extern long calclevel(void);
 extern char *inputname(void);
 extern long linenumber(void);
 extern void runrcfiles(void);
@@ -140,6 +142,7 @@ extern void givehelp(char *type);
 extern void libcalc_call_me_first(void);
 extern void libcalc_call_me_last(void);
 extern void showerrors(void);
+extern char *calc_strdup(CONST char *);
 
 /*
  * Initialization
@@ -164,6 +167,7 @@ extern int d_flag;		/* TRUE => disable heading, lib_debug == 0 */
 extern int c_flag;		/* TRUE => continue after error if permitted */
 extern int i_flag;		/* TRUE => try to go interactive after error */
 extern int stoponerror;		/* >0 => stop, <0 => continue, ==0 => use -c */
+extern BOOL abort_now;		/* TRUE => try to go interactive */
 
 extern char *pager;		/* $PAGER or default */
 extern int stdin_tty;		/* TRUE if stdin is a tty */
@@ -206,6 +210,7 @@ typedef enum {
     RUN_EXIT_WITH_ERROR = 7	/* exit with error */
 } run;
 extern run run_state;
+extern char *run_state_name(run state);
 
 /*
  * calc version information

calc.man

@@ -15,17 +15,19 @@ calc \- arbitrary precision calculator
 .RB [ \-c ]
 .RB [ \-C ]
 .RB [ \-d ]
+.RB [ -D\ \&calc_debug[:lib_debug:[user_debug]] ]
+.br
+.in +5n
 .RB [ \-e ]
 .RB [ \-h ]
 .RB [ \-i ]
 .RB [ \-m\ \&mode ]
-.br
-.in +5n
 .RB [ \-n ]
 .RB [ \-p ]
 .RB [ \-q ]
 .RB [ \-u ]
 .RB [ \-v ]
+.br
 .RB [ calc_cmd\ \&.\|.\|. ]
 .in -5n
 .SH DESCRIPTION
@@ -62,6 +64,13 @@ cause
 .B calc
 to try to process each line being read
 despite the errors that it encounters.
+.sp 1
+By default, calc startup scripts ($CALCRC) are silently
+ignored if not found.
+This flag will report missing
+startup scripts unless
+.B \-d
+is also given.
 
 .TP
 .B \-C
@@ -112,6 +121,36 @@ It's nearly ten past six.
 .fi
 .in -5n
 .sp 1
+This flag disables the reporting of missing calc
+startup scripts ($CALCRC).
+
+.TP
+.BR -D " calc_debug[:lib_debug:[user_debug]]"
+Force the initial value of config("calc_debug"),
+config("lib_debug") and config("user_debug").
+.sp 1
+The : separated strings are interpreted as signed 32 bit values.
+After an optional leading sign a leading zero indicates octal
+conversion, and a leading ``0x'' or ``0X'' hexadecimal
+conversion.  Otherwise, decimal conversion is assumed.
+.sp 1
+By default,
+.I calc_debug
+is 0,
+.I lib_debug
+is 3 and
+.I lib_debug
+is 0.
+.sp 1
+For more information use the following
+.B calc
+command:
+.sp 1
+.in +5n
+.nf
+help config
+.fi
+.in -5n
 
 .TP
 .B \-e
@@ -173,7 +212,8 @@ This flag sets the permission mode of
 It controls the ability for
 .B calc
 to open files and execute programs.
-Mode may be a number from 0 to 7.
+.I Mode
+may be a number from 0 to 7.
 .sp 1
 The mode value is interpreted in a way similar to that
 of the
@@ -196,8 +236,8 @@ octal mode:
 If one wished to run
 .B calc
 from a privileged user, one might want to use
-.B \-m
-0 in an effort to make
+.BR \-m " 0"
+in an effort to make
 .B calc
 somewhat more secure.
 .sp 1
@@ -205,8 +245,8 @@ Mode bits for reading and writing apply only on an
 open.
 Files already open are not effected.
 Thus if one wanted to use the
-.B \-m
-0 in an effort to make
+.BR \-m " 0"
+in an effort to make
 .B calc
 somewhat more secure, but still wanted to read and write a specific
 file, one might want to do in
@@ -519,6 +559,9 @@ by this environment variable.
 .sp
 Default value: ${CALCBINDINGS}
 .sp
+This variable is not used if calc was compiled with GNU-readline support.
+In that case, the standard readline mechanisms (see readline(3)) are used.
+.sp
 .SH CREDIT
 \&
 .br
@@ -527,7 +570,11 @@ The majority of
 was written by David I. Bell.
 .sp
 .B Calc
-archives and calc-tester mailing list maintained by Landon Curt Noll.
+The Calc primary mirror, calc mailing list and calc bug report
+processing is performed by Landon Curt Noll.
+.sp
+Landon Curt Noll maintains the master reference source, performs
+release control functions as well as other calc maintenance functions.
 .sp
 Thanks for suggestions and encouragement from Peter Miller,
 Neil Justusson, and Landon Noll.
@@ -567,15 +614,42 @@ scripts that you would like you see included
 in future distributions to:
 .sp
 .in +0.5i
-calc-tester@postofc.corp.sgi.com
+.nf
+calc-tester at postofc dot corp dot sgi dot com
+
+[[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+.fi
 .in -0.5i
 .sp
+Bug reports are sent to:
+.in +0.5i
+.nf
+calc-bugs at postofc dot corp dot sgi dot com
+
+[[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+.fi
+.in -0.5i
+.sp
+See the
+.I BUGS
+source file or use the
+.I calc
+command:
+.sp
+.in +0.5i
+.nf
+help bugs
+.fi
+.in -0.5i
+.sp
+for more information about bug reporting.
+.sp
 Landon Noll maintains the the
 .B calc
 web site is located at:
 .sp
 .in +0.5i
-http://reality.sgi.com/chongo/tech/comp/calc
+http://reality.sgi.com/chongo/tech/comp/calc/
 .in -0.5i
 .sp
 One may join the
@@ -583,7 +657,11 @@ One may join the
 testing group by sending a request to:
 .sp
 .in +0.5i
-calc-tester-request@postofc.corp.sgi.com
+.nf
+calc-tester-request at postofc dot corp dot sgi dot com
+
+[[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+.fi
 .in -0.5i
 .sp
 Your message body (not the subject) should consist of:

calc_errno.c

@@ -1,123 +0,0 @@
-/*
- * errno - Determine how to declare errno, sys_errlist and sys_nerr
- *
- * On most machines: errno sys_errlist and sys_nerr are declared
- * by either <stdio.h> and/or <errno.h>.  But some systems declare
- * them somewhere else or do not declare them at all!
- *
- * If the system were doing a proper job in headers, this should declare them:
- *
- *	#include <stdio.h>
- *	#include <errno.h>
- *
- * But one some systems one must explicitly declare them as:
- *
- *	extern int errno;
- *	extern const char *const sys_errlist[];
- *	extern int sys_nerr;
- *
- * and on some old systems they must be explicitly and incorrectly declared as:
- *
- *	extern int errno;
- *	extern char *sys_errlist[];
- *	extern int sys_nerr;
- *
- * The purpose of this utility is try and find the right way to declare
- * them and to output the middle of a header file called calc_errno.h.
- */
-
-/*
- * Copyright (c) 1999 by Landon Curt Noll.  All Rights Reserved.
- *
- * Permission to use, copy, modify, and distribute this software and
- * its documentation for any purpose and without fee is hereby granted,
- * provided that the above copyright, this permission notice and text
- * this comment, and the disclaimer below appear in all of the following:
- *
- *	supporting documentation
- *	source copies
- *	source works derived from this source
- *	binaries derived from this source or from derived source
- *
- * LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
- * EVENT SHALL LANDON CURT NOLL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
- * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
- * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- *
- * chongo was here	/\../\
- */
-
-#include <stdio.h>
-#if defined(TRY_ERRNO_NO_DECL)
-#  include <errno.h>
-#endif /* TRY_ERRNO_NO_DECL */
-
-int
-main(void)
-{
-
-#if defined(TRY_ERRNO_NO_DECL)
-	printf("/*\n");
-	printf(" * The following comments were produced by calc_errno\n");
-	printf(" * in an effort to see if these values were correctly\n");
-	printf(" * declared when calc_errno.c was compiled.\n");
-	printf(" */\n\n");
-	printf("/* Initially errno is %d */\n", errno);
-	printf("/* There are %d entries in sys_errlist[] */\n", sys_nerr);
-	printf("/* The 2nd sys_errlist entry is \"%s\" */\n\n", sys_errlist[1]);
-	printf("/*\n");
-	printf(" * Based on the above, calc_errno now knows\n");
-	printf(" * how to declare errno and friends.\n");
-	printf(" */\n\n");
-	printf("#include <stdio.h>\n");
-	printf("#include <errno.h>\n");
-#elif defined(TRY_ERRNO_OLD_DECL)
-	extern int errno;		/* last system error */
-	extern char *sys_errlist[];	/* system error messages */
-	extern int sys_nerr;		/* number of system errors*/
-
-	printf("/*\n");
-	printf(" * The following comments were produced by calc_errno\n");
-	printf(" * in an effort to see if these values were correctly\n");
-	printf(" * declared when calc_errno.c was compiled.\n");
-	printf(" */\n\n");
-	printf("/* Initially errno is %d */\n", errno);
-	printf("/* There are %d entries in sys_errlist[] */\n", sys_nerr);
-	printf("/* The 2nd sys_errlist entry is \"%s\" */\n\n", sys_errlist[1]);
-	printf("/*\n");
-	printf(" * Based on the above, calc_errno now knows\n");
-	printf(" * how to declare errno and friends.\n");
-	printf(" */\n\n");
-	printf("extern int errno;\t\t/* last system error */\n");
-	printf("extern char *sys_errlist[];\t"
-	       "/* system error messages */\n");
-	printf("extern int sys_nerr;\t\t/* number of system errors*/\n");
-#else	/* assume defined(TRY_ERRNO_STD_DECL) */
-	extern int errno;			/* last system error */
-	extern const char *const sys_errlist[];	/* system error messages */
-	extern int sys_nerr;			/* number of system errors*/
-
-	printf("/*\n");
-	printf(" * The following comments were produced by calc_errno\n");
-	printf(" * in an effort to see if these values were correctly\n");
-	printf(" * declared when calc_errno.c was compiled.\n");
-	printf(" */\n\n");
-	printf("/* Initially errno is %d */\n", errno);
-	printf("/* There are %d entries in sys_errlist[] */\n", sys_nerr);
-	printf("/* The 2nd sys_errlist entry is \"%s\" */\n\n", sys_errlist[1]);
-	printf("/*\n");
-	printf(" * Based on the above, calc_errno now knows\n");
-	printf(" * how to declare errno and friends.\n");
-	printf(" */\n\n");
-	printf("extern int errno;\t\t\t/* last system error */\n");
-	printf("extern const char *const sys_errlist[];\t"
-	       "/* system error messages */\n");
-	printf("extern int sys_nerr;\t\t\t/* number of system errors*/\n");
-#endif
-
-	/* exit(0); */
-	return 0;
-}

check.awk

@@ -11,6 +11,7 @@ BEGIN {
     havebuf2=0;
     buf2=0;
     error = 0;
+    end_seen = 0;
 }
 
 NF == 0 {
@@ -29,6 +30,10 @@ NF == 0 {
     next;
 }
 
+/: Ending regression tests$/ {
+    end_seen = 1;
+}
+
 $1 ~ /^[0-9]+:/ {
     if (error > 0) {
 	if (havebuf2) {
@@ -71,7 +76,7 @@ END {
     if (error > 0 && havebuf0) {
 	print buf0;
     }
-    if (error > 0) {
+    if (error > 0 || !end_seen) {
 	exit(1);
     } else {
 	exit(0);

codegen.c

@@ -31,9 +31,9 @@ static void getshowstatement(void);
 static void getfunction(void);
 static void ungetfunction(void);
 static void getbody(LABEL *contlabel, LABEL *breaklabel,
-		    LABEL *nextcaselabel, LABEL *defaultlabel, BOOL toplevel);
-static void getdeclarations(int symtype);
-static void getsimpledeclaration (int symtype);
+		    LABEL *nextcaselabel, LABEL *defaultlabel);
+static int getdeclarations(int symtype);
+static int getsimpledeclaration (int symtype);
 static int getonevariable (int symtype);
 static void getstatement(LABEL *contlabel, LABEL *breaklabel,
 			 LABEL *nextcaselabel, LABEL *defaultlabel);
@@ -86,6 +86,7 @@ getcommands(BOOL toplevel)
 	/* firewall */
 	name[0] = '\0';
 	name[MAXCMD+1] = '\0';
+	abort_now = FALSE;
 
 	/* getcommands */
 	if (!toplevel)
@@ -164,6 +165,13 @@ getcommands(BOOL toplevel)
 			if (evaluate(FALSE))
 				updateoldvalue(curfunc);
 			freefunc(curfunc);
+			if (abort_now) {
+				if (!stdin_tty)
+					run_state = RUN_EXIT;
+				else if (run_state < RUN_PRE_TOP_LEVEL)
+				run_state = RUN_PRE_TOP_LEVEL;
+				longjmp(jmpbuf, 1);
+			}
 		}
 	}
 }
@@ -190,13 +198,16 @@ evaluate(BOOL nestflag)
 
 	funcname = (nestflag ? "**" : "*");
 	beginfunc(funcname, nestflag);
+	if (gettoken() == T_LEFTBRACE) {
+		getbody(NULL_LABEL, NULL_LABEL, NULL_LABEL, NULL_LABEL);
+	} else {
 		if (nestflag)
 			(void) tokenmode(TM_DEFAULT);
+		rescantoken();
 		while (loop) {
 			switch (gettoken()) {
 				case T_SEMICOLON:
 					break;
-
 				case T_NEWLINE:
 				case T_EOF:
 					loop = 0;
@@ -208,6 +219,7 @@ evaluate(BOOL nestflag)
 						NULL_LABEL, NULL_LABEL);
 			}
 		}
+	}
 	addop(OP_UNDEF);
 	addop(OP_RETURN);
 	checklabels();
@@ -244,9 +256,15 @@ ungetfunction(void)
 			case T_MULT:
 				rmalluserfunc();
 				continue;
-			default:
+			case T_NEWLINE:
+			case T_SEMICOLON:
+			case T_EOF:
 				rescantoken();
 				return;
+			default:
+				scanerror(T_SEMICOLON,
+					 "Non-name arg for undefine");
+				return;
 		}
 	}
 }
@@ -322,13 +340,11 @@ getfunction(void)
 	}
 	switch (gettoken()) {
 		case T_ASSIGN:
-			rescantoken();
 			getsimplebody();
 			break;
 		case T_LEFTBRACE:
-			rescantoken();
 			getbody(NULL_LABEL, NULL_LABEL, NULL_LABEL,
-				NULL_LABEL, TRUE);
+				NULL_LABEL);
 			break;
 		default:
 			scanerror(T_NULL,
@@ -347,11 +363,6 @@ getfunction(void)
 static void
 getsimplebody(void)
 {
-	if (gettoken() != T_ASSIGN) {
-		scanerror(T_SEMICOLON,
-		    "Missing equals for simple function body");
-		return;
-	}
 	(void) tokenmode(TM_NEWLINES);
 	(void) getexprlist();
 	addop(OP_RETURN);
@@ -365,14 +376,10 @@ getsimplebody(void)
  */
 /*ARGSUSED*/
 static void
-getbody(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *defaultlabel, BOOL toplevel)
+getbody(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *defaultlabel)
 {
 	int oldmode;
 
-	if (gettoken() != T_LEFTBRACE) {
-		scanerror(T_SEMICOLON, "Missing left brace for function body");
-		return;
-	}
 	oldmode = tokenmode(TM_DEFAULT);
 	while (TRUE) {
 		switch (gettoken()) {
@@ -380,6 +387,10 @@ getbody(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *defaul
 			(void) tokenmode(oldmode);
 			return;
 
+		case T_EOF:
+			scanerror(T_NULL, "End-of-file in function body");
+			return;
+
 		default:
 			rescantoken();
 			getstatement(contlabel, breaklabel, nextcaselabel, defaultlabel);
@@ -393,9 +404,11 @@ getbody(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *defaul
  * declarations = { LOCAL | GLOBAL | STATIC } onedeclaration
  *	[ ',' onedeclaration ] ... ';'.
  */
-static void
+static int
 getdeclarations(int symtype)
 {
+	int res = 0;
+
 	while (TRUE) {
 		switch (gettoken()) {
 			case T_COMMA:
@@ -404,29 +417,33 @@ getdeclarations(int symtype)
 			case T_NEWLINE:
 			case T_SEMICOLON:
 			case T_RIGHTBRACE:
+			case T_EOF:
 				rescantoken();
-				return;
+				return res;
 
 			case T_SYMBOL:
 				addopone(OP_DEBUG, linenumber());
 				rescantoken();
-				getsimpledeclaration(symtype);
+				if (getsimpledeclaration(symtype))
+					res = 1;
 				break;
 
 			case T_MAT:
 				addopone(OP_DEBUG, linenumber());
 				getmatdeclaration(symtype);
+				res = 1;
 				break;
 
 			case T_OBJ:
 				addopone(OP_DEBUG, linenumber());
 				getobjdeclaration(symtype);
 				addop(OP_POP);
+				res = 1;
 				break;
 
 			default:
 				scanerror(T_SEMICOLON, "Bad syntax in declaration statement");
-				return;
+				return res;
 		}
 	}
 }
@@ -438,22 +455,24 @@ getdeclarations(int symtype)
  * Subsequences end with "," or at end of line; spaces indicate
  * repeated assignment, e.g. "c d = 2" has the effect of "c = 2, d = 2".
  */
-static void
+static int
 getsimpledeclaration(int symtype)
 {
+	int res = 0;
 
 	for (;;) {
 		switch (gettoken()) {
 			case T_SYMBOL:
 				rescantoken();
-				if (getonevariable(symtype))
+				res = getonevariable(symtype);
+				if (res)
 					addop(OP_POP);
 				continue;
 			case T_COMMA:
 				continue;
 			default:
 				rescantoken();
-				return;
+				return res;
 		}
 	}
 }
@@ -502,11 +521,9 @@ getonevariable(int symtype)
  *	| BREAK ';'
  *	| RETURN assignment ';'
  *	| GOTO label ';'
- *	| MAT name '[' value [ ':' value ] [',' value [ ':' value ] ] ']' ';'
- *	| OBJ type '{' arg [ ',' arg ] ... '}' ] ';'
- *	| OBJ type name [ ',' name ] ';'
  *	| PRINT assignment [, assignment ] ... ';'
  *	| QUIT [ string ] ';'
+ *	| ABORT [ string ] ';'
  *	| SHOW item ';'
  *	| body
  *	| assignment ';'
@@ -535,18 +552,20 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 		return;
 
 	case T_GLOBAL:
-		getdeclarations(SYM_GLOBAL);
+		(void) getdeclarations(SYM_GLOBAL);
 		break;
 
 	case T_STATIC:
 		clearlabel(&label);
 		addoplabel(OP_INITSTATIC, &label);
-		getdeclarations(SYM_STATIC);
+		if (getdeclarations(SYM_STATIC))
 			setlabel(&label);
+		else
+			curfunc->f_opcodecount -= 2;
 		break;
 
 	case T_LOCAL:
-		getdeclarations(SYM_LOCAL);
+		(void) getdeclarations(SYM_LOCAL);
 		break;
 
 	case T_RIGHTBRACE:
@@ -595,8 +614,7 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 		break;
 
 	case T_LEFTBRACE:
-		rescantoken();
-		getbody(contlabel, breaklabel, nextcaselabel, defaultlabel, FALSE);
+		getbody(contlabel, breaklabel, nextcaselabel, defaultlabel);
 		return;
 
 	case T_IF:
@@ -687,14 +705,14 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 			}
 		}
 		if (gettoken() != T_RIGHTPAREN) {	/* have 'c' part */
-			if (label1.l_offset <= 0)
+			if (label1.l_offset < 0)
 				addoplabel(OP_JUMP, &label3);
 			setlabel(&label2);
 			contlabel = &label2;
 			rescantoken();
 			(void) getexprlist();
 			addop(OP_POP);
-			if (label1.l_offset > 0)
+			if (label1.l_offset >= 0)
 				addoplabel(OP_JUMP, &label1);
 			if (gettoken() != T_RIGHTPAREN) {
 				(void) tokenmode(oldmode);
@@ -714,15 +732,21 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 	case T_WHILE:
 		oldmode = tokenmode(TM_DEFAULT);
 		contlabel = &label1;
-		breaklabel = &label2;
 		clearlabel(contlabel);
-		clearlabel(breaklabel);
 		setlabel(contlabel);
 		getcondition();
+		if (gettoken() != T_SEMICOLON) {
+			breaklabel = &label2;
+			clearlabel(breaklabel);
 			addoplabel(OP_JUMPZ, breaklabel);
-		getstatement(contlabel, breaklabel, NULL_LABEL, NULL_LABEL);
+			rescantoken();
+			getstatement(contlabel, breaklabel,
+				NULL_LABEL, NULL_LABEL);
 			addoplabel(OP_JUMP, contlabel);
 			setlabel(breaklabel);
+		} else {
+			addoplabel(OP_JUMPNZ, contlabel);
+		}
 		(void) tokenmode(oldmode);
 		return;
 
@@ -866,8 +890,19 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 		}
 		break;
 
+	case T_ABORT:
+		switch (gettoken()) {
+			case T_STRING:
+				addopone(OP_ABORT, tokenstring());
+				break;
+			default:
+				addopone(OP_ABORT, -1);
+				rescantoken();
+		}
+		break;
+
 	case T_SYMBOL:
-		if (nextchar() == ':') {	/****HACK HACK ****/
+		if (nextchar() == ':') {	/****HACK HACK****/
 			definelabel(tokensymbol());
 			if (gettoken() == T_RIGHTBRACE) {
 				rescantoken();
@@ -979,7 +1014,11 @@ getobjdeclaration(int symtype)
 				/*FALLTHRU*/
 			case T_RIGHTBRACE:
 				(void) tokenmode(oldmode);
-				(void) defineobject(name, indices, count);
+				if (defineobject(name, indices, count)) {
+					scanerror(T_NULL,
+				"Object type \"%s\" is already defined", name);
+					return;
+				}
 				getobjvars(name, symtype);
 				return;
 			case T_NEWLINE:
@@ -1001,8 +1040,7 @@ getoneobj(long index, int symtype)
 		if (symtype == SYM_UNDEFINED) {
 			rescantoken();
 			(void) getidexpr(TRUE, TRUE);
-		}
-		else {
+		} else {
 			symname = tokensymbol();
 			definesymbol(symname, symtype);
 			usesymbol(symname, FALSE);
@@ -1019,18 +1057,14 @@ getoneobj(long index, int symtype)
 }
 
 /*
- * Routine to collect a set of variables for the specified object type
- * and initialize them as being that type of object.
- * Here
- *	objlist = name initlist [ ',' name initlist ] ... ';'.
- * If symtype is SYM_UNDEFINED, then this is an OBJ statement where the
- * values can be any variable expression, and no symbols are to be defined.
- * Otherwise this is part of a declaration, and the variables must be raw
- * symbol names which are defined with the specified symbol type.
+ * Routine to assign a specified object-type value to each of a set of
+ * variables in a "global", "local" or "static" declaration, or, if
+ * symtype is SYM_UNDEFINED, to create one object value of the specified
+ * type.
  *
  * given:
  *	name		object name
- *	symtype		type of symbol to collect for
+ *	symtype		declaration type
  */
 static void
 getobjvars(char *name, int symtype)
@@ -1044,6 +1078,8 @@ getobjvars(char *name, int symtype)
 	}
 	for (;;) {
 		getoneobj(index, symtype);
+		if (symtype == SYM_UNDEFINED)
+			return;
 		if (gettoken() != T_COMMA) {
 			rescantoken();
 			return;
@@ -1086,8 +1122,7 @@ getonematrix(int symtype)
 		if (symtype == SYM_UNDEFINED) {
 			rescantoken();
 			(void) getidexpr(FALSE, TRUE);
-		}
-		else {
+		} else {
 			name = tokensymbol();
 			definesymbol(name, symtype);
 			usesymbol(name, FALSE);
@@ -1172,9 +1207,9 @@ creatematrix(void)
 		switch (gettoken()) {
 			case T_RIGHTBRACKET:
 				addopone(OP_MATCREATE, dim);
-				if (gettoken() == T_LEFTBRACKET)
+				if (gettoken() == T_LEFTBRACKET) {
 					creatematrix();
-				else {
+				} else {
 					rescantoken();
 					addop(OP_ZERO);
 				}
@@ -1336,7 +1371,7 @@ getopassignment(void)
 			return type;
 	}
 	if (isrvalue(type)) {
-		scanerror(T_NULL, "Illegal assignment in getopassignment");
+		scanerror(T_NULL, "Illegal assignment");
 		(void) getopassignment();
 		return (EXPR_RVALUE | EXPR_ASSIGN);
 	}
@@ -1350,8 +1385,7 @@ getopassignment(void)
 			while (gettoken() == T_ASSIGN)
 				getinitlist();
 			rescantoken();
-		}
-		else {
+		} else {
 			rescantoken();
 			(void) getassignment();
 		}
@@ -1430,7 +1464,7 @@ getassignment (void)
 			return type;
 	}
 	if (isrvalue(type)) {
-		scanerror(T_SEMICOLON, "Illegal assignment in getassignment");
+		scanerror(T_SEMICOLON, "Illegal assignment");
 		(void) getassignment();
 		return (EXPR_RVALUE | EXPR_ASSIGN);
 	}
@@ -1889,11 +1923,6 @@ getterm(void)
 
 		case T_MAT:
 			getonematrix(SYM_UNDEFINED);
-			while (gettoken() == T_COMMA) {
-				addop(OP_POP);
-				getonematrix(SYM_UNDEFINED);
-			}
-			rescantoken();
 			type = EXPR_ASSIGN;
 			break;
 

comfunc.c

@@ -138,38 +138,6 @@ csqrt(COMPLEX *c, NUMBER *epsilon, long R)
 
 	up1 = up2 = 0;
 	sign = (R & 64) != 0;
-#if 0
-	if (qiszero(epsilon)) {
-		aes = qsquare(c->real);
-		bes = qsquare(c->imag);
-		v = qqadd(aes, bes);
-		qfree(aes);
-		qfree(bes);
-		u = qsqrt(v, epsilon, 0);
-		qfree(v);
-		if (qiszero(u)) {
-			qfree(u);
-			return clink(&_czero_);
-		}
-		aes = qqadd(u, c->real);
-		qfree(u);
-		bes = qscale(aes, -1);
-		qfree(aes);
-		u = qsqrt(bes, epsilon, R);
-		qfree(bes);
-		if (qiszero(u)) {
-			qfree(u);
-			return clink(&_czero_);
-		}
-		aes = qscale(c->imag, -1);
-		v = qqdiv(aes, u);
-		qfree(aes);
-		r = comalloc();
-		r->real = u;
-		r->imag = v;
-		return r;
-	}
-#endif
 	imsign = c->imag->num.sign;
 	es = qsquare(epsilon);
 	aes = qqdiv(c->real, es);
@@ -231,8 +199,7 @@ csqrt(COMPLEX *c, NUMBER *epsilon, long R)
 				return r;
 			}
 			s3 = zquo(tmp3, d, &tmp1, s2 < 0);
-		}
-		else {
+		} else {
 			s2 = zquo(tmp1, d, &tmp3, s1 ? (s1 < 0) : 16);
 			zfree(tmp1);
 			s3 = zsqrt(tmp3,&tmp1,(s1||s2) ? (s1<0 || s2<0) : 16);
@@ -256,8 +223,7 @@ csqrt(COMPLEX *c, NUMBER *epsilon, long R)
 			up2 = -1;
 		zfree(tmp1);
 		zfree(aa);
-	}
-	else {
+	} else {
 		s1 = zsqrt(tmp3, &cc, 0);
 		zfree(tmp3);
 		zadd(cc, a, &tmp1);
@@ -288,8 +254,7 @@ csqrt(COMPLEX *c, NUMBER *epsilon, long R)
 				return r;
 			}
 			s3 = zquo(tmp3, d, &mul1, 0);
-		}
-		else {
+		} else {
 			s2 = zquo(tmp1, d, &tmp3, 0);
 			zfree(tmp1);
 			s3 = zsqrt(tmp3, &mul1, 0);
@@ -335,9 +300,9 @@ csqrt(COMPLEX *c, NUMBER *epsilon, long R)
 		zfree(mul2);
 		mul2 = tmp2;
 	}
-	if (ziszero(mul1))
+	if (ziszero(mul1)) {
 		u = qlink(&_qzero_);
-	else {
+	} else {
 		mul1.sign = sign ^ epsilon->num.sign;
 		u = qalloc();
 		zreduce(mul1, epsilon->den, &tmp2, &u->den);
@@ -345,9 +310,9 @@ csqrt(COMPLEX *c, NUMBER *epsilon, long R)
 		zfree(tmp2);
 	}
 	zfree(mul1);
-	if (ziszero(mul2))
+	if (ziszero(mul2)) {
 		v = qlink(&_qzero_);
-	else {
+	} else {
 		mul2.sign = imsign ^ sign ^ epsilon->num.sign;
 		v = qalloc();
 		zreduce(mul2, epsilon->den, &tmp2, &v->den);
@@ -1149,5 +1114,3 @@ cprintfr(COMPLEX *c)
 		zprintval(i->den, 0L, 0L);
 	}
 }
-
-/* END CODE */

config.c

@@ -55,6 +55,7 @@ NAMETYPE configs[] = {
 	{"lib_debug",	CONFIG_LIB_DEBUG},
 	{"calc_debug",	CONFIG_CALC_DEBUG},
 	{"user_debug",	CONFIG_USER_DEBUG},
+	{"verbose_quit",CONFIG_VERBOSE_QUIT},
 	{NULL,		0}
 };
 
@@ -93,9 +94,10 @@ CONFIG oldstd = {	/* backward compatible standard configuration */
 	FALSE,			/* skip duplicate block output lines */
 	BLK_BASE_HEX,		/* block octet print base */
 	BLK_FMT_HD_STYLE,	/* block output format */
-	3,			/* calc library debug level */
 	0,			/* internal calc debug level */
-	0 			/* user defined debug level */
+	3,			/* calc library debug level */
+	0,			/* user defined debug level */
+	TRUE			/* print Quit or abort executed messages */
 };
 CONFIG newstd = {	/* new non-backward compatible configuration */
 	MODE_INITIAL,		/* current output mode */
@@ -128,9 +130,10 @@ CONFIG newstd = {	/* new non-backward compatible configuration */
 	FALSE,			/* skip duplicate block output lines */
 	BLK_BASE_HEX,		/* block octet print base */
 	BLK_FMT_HD_STYLE,	/* block output format */
-	3,			/* calc library debug level */
 	0,			/* internal calc debug level */
-	0 			/* user defined debug level */
+	3,			/* calc library debug level */
+	0,			/* user defined debug level */
+	TRUE			/* print Quit or abort executed messages */
 };
 CONFIG *conf = NULL;	/* loaded in at startup - current configuration */
 
@@ -806,20 +809,6 @@ setconfig(int type, VALUE *vp)
 		conf->blkfmt = temp;
 		break;
 
-	case CONFIG_LIB_DEBUG:
-		if (vp->v_type != V_NUM) {
-			math_error("Non numeric for lib_debug");
-			/*NOTREACHED*/
-		}
-		q = vp->v_num;
-		temp = qtoi(q);
-		if (qisfrac(q) || !zistiny(q->num)) {
-			math_error("Illegal lib_debug parameter value");
-			/*NOTREACHED*/
-		}
-		conf->lib_debug = temp;
-		break;
-
 	case CONFIG_CALC_DEBUG:
 		if (vp->v_type != V_NUM) {
 			math_error("Non numeric for calc_debug");
@@ -834,6 +823,20 @@ setconfig(int type, VALUE *vp)
 		conf->calc_debug = temp;
 		break;
 
+	case CONFIG_LIB_DEBUG:
+		if (vp->v_type != V_NUM) {
+			math_error("Non numeric for lib_debug");
+			/*NOTREACHED*/
+		}
+		q = vp->v_num;
+		temp = qtoi(q);
+		if (qisfrac(q) || !zistiny(q->num)) {
+			math_error("Illegal lib_debug parameter value");
+			/*NOTREACHED*/
+		}
+		conf->lib_debug = temp;
+		break;
+
 	case CONFIG_USER_DEBUG:
 		if (vp->v_type != V_NUM) {
 			math_error("Non numeric for user_debug");
@@ -848,6 +851,21 @@ setconfig(int type, VALUE *vp)
 		conf->user_debug = temp;
 		break;
 
+	case CONFIG_VERBOSE_QUIT:
+		if (vp->v_type == V_NUM) {
+			q = vp->v_num;
+			conf->verbose_quit = !qiszero(q);
+		} else if (vp->v_type == V_STR) {
+			temp = truthtype(vp->v_str->s_str);
+			if (temp < 0) {
+				math_error("Illegal truth value"
+					   "for verbose_quit");
+				/*NOTREACHED*/
+			}
+			conf->verbose_quit = (int)temp;
+		}
+		break;
+
 	default:
 		math_error("Setting illegal config parameter");
 		/*NOTREACHED*/
@@ -982,6 +1000,7 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 	 * convert element to value
 	 */
 	vp->v_type = V_NUM;
+	vp->v_subtype = V_NOSUBTYPE;
 	switch (type) {
 	case CONFIG_ALL:
 		vp->v_type = V_CONFIG;
@@ -1107,18 +1126,22 @@ config_value(CONFIG *cfg, int type, VALUE *vp)
 		i = cfg->blkfmt;
 		break;
 
-	case CONFIG_LIB_DEBUG:
-		i = cfg->lib_debug;
-		break;
-
 	case CONFIG_CALC_DEBUG:
 		i = cfg->calc_debug;
 		break;
 
+	case CONFIG_LIB_DEBUG:
+		i = cfg->lib_debug;
+		break;
+
 	case CONFIG_USER_DEBUG:
 		i = cfg->user_debug;
 		break;
 
+	case CONFIG_VERBOSE_QUIT:
+		i = cfg->verbose_quit;
+		break;
+
 	default:
 		math_error("Getting illegal CONFIG element");
 		/*NOTREACHED*/
@@ -1192,7 +1215,8 @@ config_cmp(CONFIG *cfg1, CONFIG *cfg2)
 	       cfg1->blkverbose != cfg2->blkverbose ||
 	       cfg1->blkbase != cfg2->blkbase ||
 	       cfg1->blkfmt != cfg2->blkfmt ||
-	       cfg1->lib_debug != cfg2->lib_debug ||
 	       cfg1->calc_debug != cfg2->calc_debug ||
-	       cfg1->user_debug != cfg2->user_debug;
+	       cfg1->lib_debug != cfg2->lib_debug ||
+	       cfg1->user_debug != cfg2->user_debug ||
+	       cfg1->verbose_quit != cfg2->verbose_quit;
 }

config.h

@@ -29,7 +29,7 @@
  * Happy bit twiddling,
  *
  *	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */
@@ -80,6 +80,7 @@
 #define CONFIG_LIB_DEBUG 30
 #define CONFIG_CALC_DEBUG 31
 #define CONFIG_USER_DEBUG 32
+#define CONFIG_VERBOSE_QUIT 33
 
 
 /*
@@ -114,8 +115,8 @@ struct config {
 	LEN sq2;		/* size of number to use square algorithm 2 */
 	LEN pow2;		/* size of modulus to use REDC for powers */
 	LEN redc2;		/* size of modulus to use REDC algorithm 2 */
-	int tilde_ok;		/* ok to print a tilde on aproximations */
-	int tab_ok;		/* ok to print tab before numeric values */
+	BOOL tilde_ok;		/* ok to print a tilde on aproximations */
+	BOOL tab_ok;		/* ok to print tab before numeric values */
 	long quomod;		/* quomod() default rounding mode */
 	long quo;		/* quotent // default rounding mode */
 	long mod;		/* mod % default rounding mode */
@@ -125,28 +126,52 @@ struct config {
 	long cfsim;		/* cfsim() default rounding mode */
 	long outround;		/* output default rounding mode */
 	long round;		/* round()/bround() default rounding mode */
-	int leadzero;		/* ok to print leading 0 before decimal pt */
-	int fullzero;		/* ok to print trailing 0's */
+	BOOL leadzero;		/* ok to print leading 0 before decimal pt */
+	BOOL fullzero;		/* ok to print trailing 0's */
 	long maxscancount;	/* max scan errors before abort */
 	char *prompt1;		/* normal prompt */
 	char *prompt2;		/* prompt when inside multi-line input */
 	int blkmaxprint;	/* octets of a block to print, 0 => all */
-	int blkverbose;		/* TRUE => print all lines if a block */
+	BOOL blkverbose;	/* TRUE => print all lines if a block */
 	int blkbase;		/* block output base */
 	int blkfmt;		/* block output style */
-	int lib_debug;		/* library debug: <0 none, 0 default, >0 more */
-	int calc_debug;		/* internal debug: <0 none, 0 default,>0 more */
-	int user_debug;		/* user defined debug value: 0 default */
+	long calc_debug;	/* internal debug, see CALC_DEBUG_XXX below */
+	long lib_debug;		/* library debug, see LIB_DEBUG_XXX below */
+	long user_debug;	/* user defined debug value: 0 default */
+	BOOL verbose_quit;	/* TRUE => print Quit or abort executed msg */
 };
 typedef struct config CONFIG;
 
 
+/*
+ * lib_debug bit masks
+ */
+#define LIBDBG_STDIN_FUNC   (0x00000001)    /* interactive func define debug */
+#define LIBDBG_FILE_FUNC    (0x00000002)    /* file read func define debug */
+#define LIBDBG_MASK	    (0x00000003)
+
+
+/*
+ * calc_debug bit masks
+ */
+#define CALCDBG_SYSTEM	    (0x00000001)    /* print system cmd prior to exec */
+#define CALCDBG_FUNC_QUIT   (0x00000002)    /* active functions when quit */
+#define CALCDBG_HASH_STATE  (0x00000004)    /* hash state details */
+#define CALCDBG_BLOCK	    (0x00000008)    /* block debug */
+#define CALCDBG_TTY	    (0x00000010)    /* report TTY state changes */
+#define CALCDBG_RUNSTATE    (0x00000020)    /* report run_state changes */
+#define CALCDBG_MASK	    (0x0000003f)
+
+
 /*
  * global configuration states and aliases
  */
 extern CONFIG *conf;		/* current configuration */
 extern CONFIG oldstd;		/* backward compatible standard configuration */
 extern CONFIG newstd;		/* new non-backward compatible configuration */
+extern char *calc_debug;	/* !=NULL => value of config("calc_debug") */
+extern char *lib_debug;		/* !=NULL => value of config("lib_debug") */
+extern char *user_debug;	/* !=NULL => value of config("user_debug") */
 
 
 /*

custom.c

@@ -25,7 +25,7 @@
  * Happy bit twiddling,
  *
  *	Landon Curt Noll
- *	http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */

custom.h

@@ -29,7 +29,7 @@
  * Happy bit twiddling,
  *
  *	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */

custom/CUSTOM_CAL

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 1997 Landon Curt Noll
+# Copyright (c) 1999 Landon Curt Noll
 #
 # Permission to use, copy, modify, and distribute this software and
 # its documentation for any purpose and without fee is hereby granted,
@@ -19,7 +19,7 @@
 # OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 # PERFORMANCE OF THIS SOFTWARE.
 #
-# chongo was here	/\../\		http://reality.sgi.com/chongo
+# chongo was here	/\../\		http://reality.sgi.com/chongo/
 
 The following custom calc library files are provided because they serve
 as examples of how use the custom interface.  The custom interface
@@ -44,8 +44,19 @@ calc library standards and guidelines.
 
 =-=
 
+argv.cal
+
+    argv(var, ...)
+
+    print information about various args
+
 halflen.cal
 
     halflen(num)
 
     Calculate the length of a numeric value in HALF's.
+
+pzasusb8.cal
+
+    Run custom("pzasusb8") on a standard set of data, print Endian
+    related information and print value size information.

custom/HOW_TO_ADD

@@ -38,17 +38,17 @@ Step 1: Do some background work
     you look at some examples of custom functions.  Check out
     the following source files:
 
-	../custom.c
-	custom.h
-	custtbl.c
-	c_*.[ch]
-	../help/custom
+	custom.c
+	custom/custom.h
+	custom/custtbl.c
+	custom/c_*.[ch]
+	help/custom		(or run:  calc help custom)
 
     You would be well advised to look at a more recent calc source
-    such as one available in from the calc alpha test archive.
+    such as one available in from the calc version archive.
     See the following for more details:
 
-	../help/archive
+	help/archive		(or run:  calc help archive)
 
 
 Step 2: Name your custom function
@@ -604,3 +604,16 @@ Step 11: Install
 
     Although calc does not run setuid, you may need to be root to install
     the directories into which calc installs may be write protected.
+
+
+Step 12: Contribute
+
+    Your custom function may be of interest to some people and/or
+    serve as an example of what one can do with custom functions.
+
+    Read the file:
+
+	help/contrib		(or run:  calc help contrib)
+
+    and consider submitting your custom function for possible
+    inclusion in later versions of calc.

custom/Makefile

@@ -27,7 +27,7 @@
 # Happy bit twiddling,
 #
 #      Landon Curt Noll
-#      http://reality.sgi.com/chongo
+#      http://reality.sgi.com/chongo/
 #
 # chongo <was here> /\../\
 
@@ -310,6 +310,15 @@ libcustcalc.a: ${CUSTCALC_OBJ} ${MAKE_FILE} ../Makefile
 	ar qc libcustcalc.a ${CUSTCALC_OBJ}
 	${RANLIB} libcustcalc.a
 
+##
+#
+# Special .o files
+#
+##
+
+c_sysinfo.o: c_sysinfo.c ${MAKE_FILE}
+	${CC} ${CFLAGS} c_sysinfo.c -c
+
 ##
 #
 # used by the upper level Makefile
@@ -337,15 +346,11 @@ libcustcalc.a: ${CUSTCALC_OBJ} ${MAKE_FILE} ../Makefile
 
 distlist: ${DISTLIST}
 	${Q}for i in ${DISTLIST}; do \
-		echo calc/custom/$$i; \
+		echo custom/$$i; \
 	done
 
-# The bsdi distribution has generated files as well as distributed files.
-#
-bsdilist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
-		echo calc/custom/$$i; \
-	done
+distdir:
+	${Q}echo custom
 
 ##
 #
@@ -419,9 +424,13 @@ depend:
 	else \
 		rm -f Makefile.tmp; \
 		mv Makefile Makefile.tmp; \
-		sccs edit Makefile; \
+		if [ -d RCS ]; then \
+		    co -l Makefile; \
+		fi ;\
 		mv Makefile.tmp Makefile; \
-		echo new 'custom Makefile formed -- you need to check it in'; \
+		if [ -d RCS ]; then \
+		echo 'new custom Makefile formed -- you need to check it in'; \
+		fi; \
 	fi
 
 ##
@@ -588,8 +597,28 @@ c_help.o: ../string.h
 c_help.o: ../value.h
 c_help.o: ../zmath.h
 c_help.o: c_help.c
+c_pzasusb8.o: ../alloc.h
+c_pzasusb8.o: ../block.h
+c_pzasusb8.o: ../byteswap.h
+c_pzasusb8.o: ../calcerr.h
+c_pzasusb8.o: ../cmath.h
+c_pzasusb8.o: ../config.h
 c_pzasusb8.o: ../custom.h
+c_pzasusb8.o: ../endian_calc.h
+c_pzasusb8.o: ../hash.h
 c_pzasusb8.o: ../have_const.h
+c_pzasusb8.o: ../have_malloc.h
+c_pzasusb8.o: ../have_memmv.h
+c_pzasusb8.o: ../have_newstr.h
+c_pzasusb8.o: ../have_stdlib.h
+c_pzasusb8.o: ../have_string.h
+c_pzasusb8.o: ../longbits.h
+c_pzasusb8.o: ../md5.h
+c_pzasusb8.o: ../nametype.h
+c_pzasusb8.o: ../qmath.h
+c_pzasusb8.o: ../shs.h
+c_pzasusb8.o: ../shs1.h
+c_pzasusb8.o: ../string.h
 c_pzasusb8.o: ../value.h
 c_pzasusb8.o: ../zmath.h
 c_pzasusb8.o: c_pzasusb8.c

custom/argv.cal

@@ -10,7 +10,7 @@
  * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
  * PERFORMANCE OF THIS SOFTWARE.
  *
- * chongo was here	/\../\		http://reality.sgi.com/chongo
+ * chongo was here	/\../\		http://reality.sgi.com/chongo/
  */
 /*
  * argv - print information about various args

custom/c_argv.c

@@ -16,7 +16,7 @@
  * Happy bit twiddling,
  *
  *	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */

custom/c_devnull.c

@@ -16,7 +16,7 @@
  * Happy bit twiddling,
  *
  *	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */

custom/c_help.c

@@ -16,7 +16,7 @@
  * Happy bit twiddling,
  *
  *	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */

custom/c_sysinfo.c

@@ -16,7 +16,7 @@
  * Happy bit twiddling,
  *
  *	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */
@@ -33,6 +33,7 @@
 #include "../config.h"
 #include "../calc.h"
 #include "../longbits.h"
+#define CHECK_L_FORMAT
 #include "../longlong.h"
 #include "../block.h"
 #include "../calcerr.h"
@@ -108,7 +109,6 @@ static struct infoname sys_info[] = {
     {"MAXLABELS", "max number of user labels in function", NULL, (FULL)MAXLABELS},
     {"MAXLEN", "longest storage size allowed", NULL, (FULL)MAXLEN},
     {"MAXLONG", "largest long val", NULL, (FULL)MAXLONG},
-    {"MAXOBJECTS", "max number of object types", NULL, (FULL)MAXOBJECTS},
     {"MAXPRINT_DEFAULT", "default number of elements printed", NULL, (FULL)MAXPRINT_DEFAULT},
     {"MAXREDC", "number of entries in REDC cache", NULL, (FULL)MAXREDC},
     {"MAXSCANCOUNT", "default max scan errors before an abort", NULL, (FULL)MAXSCANCOUNT},
@@ -307,17 +307,33 @@ static void
 dump_name_value(void)
 {
 	struct infoname *p;	/* current infoname */
+	char *fmt;		/* printf value format */
 
 	/* dump the entire table */
 	for (p = sys_info; p->name != NULL; ++p) {
 		if (p->str == NULL) {
 #if LONG_BITS == FULL_BITS || FULL_BITS == 32 || !defined(HAVE_LONGLONG)
-			printf("%s%-23s\t%-8lu\t(0x%lx)\n",
+			fmt = "%s%-23s\t%-8lu\t(0x%lx)\n";
+			printf(fmt,
 			    (conf->tab_ok ? "\t" : ""), p->name,
 			    (unsigned long)p->nmbr,
 			    (unsigned long)p->nmbr);
 #else
-			printf("%s%-23s\t%-8llu\t(0x%llx)\n",
+			/*
+			 * Determine of %ld can print a 64 bit long long.
+			 *
+			 * Some systems that can make use of %ld to print a
+			 * a 64 bit value do not support the %lld type.
+			 * So we will only try %lld if %ld does not work.
+			 */
+			if (l_format < 0) {
+				/* %ld prints lower 32 bits only, use %lld */
+				fmt = "%s%-23s\t%-8llu\t(0x%llx)\n";
+			} else {
+				/* %ld prints all 64 bits, use %ld */
+				fmt = "%s%-23s\t%-8lu\t(0x%lx)\n";
+			}
+			printf(fmt,
 			    (conf->tab_ok ? "\t" : ""), p->name,
 			    (unsigned long long)p->nmbr,
 			    (unsigned long long)p->nmbr);
@@ -338,17 +354,33 @@ static void
 dump_mening_value(void)
 {
 	struct infoname *p;	/* current infoname */
+	char *fmt;		/* printf value format */
 
 	/* dump the entire table */
 	for (p = sys_info; p->name != NULL; ++p) {
 		if (p->str == NULL) {
 #if LONG_BITS == FULL_BITS || FULL_BITS == 32 || !defined(HAVE_LONGLONG)
-			printf("%s%-36.36s\t%-8lu\t(0x%lx)\n",
+			fmt = "%s%-36.36s\t%-8lu\t(0x%lx)\n";
+			printf(fmt,
 			    (conf->tab_ok ? "\t" : ""), p->meaning,
 			    (unsigned long)p->nmbr,
 			    (unsigned long)p->nmbr);
 #else
-			printf("%s%-36.36s\t%-8llu\t(0x%llx)\n",
+			/*
+			 * Determine of %ld can print a 64 bit long long.
+			 *
+			 * Some systems that can make use of %ld to print a
+			 * a 64 bit value do not support the %lld type.
+			 * So we will only try %lld if %ld does not work.
+			 */
+			if (l_format < 0) {
+				/* %ld prints lower 32 bits only, use %lld */
+				fmt = "%s%-36.36s\t%-8llu\t(0x%llx)\n";
+			} else {
+				/* %ld prints all 64 bits, use %ld */
+				fmt = "%s%-36.36s\t%-8lu\t(0x%lx)\n";
+			}
+			printf(fmt,
 			    (conf->tab_ok ? "\t" : ""), p->meaning,
 			    (unsigned long long)p->nmbr,
 			    (unsigned long long)p->nmbr);

custom/custtbl.c

@@ -25,7 +25,7 @@
  * Happy bit twiddling,
  *
  *	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  * chongo <was here> /\../\
  */

custom/halflen.cal

@@ -10,7 +10,7 @@
  * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
  * PERFORMANCE OF THIS SOFTWARE.
  *
- * chongo was here	/\../\		http://reality.sgi.com/chongo
+ * chongo was here	/\../\		http://reality.sgi.com/chongo/
  */
 /*
  * halflen - determine the length of numeric value in HALFs

custom/pzasusb8.cal

@@ -27,3 +27,5 @@ print "BIG_ENDIAN: ", custom("sysinfo", "BIG_ENDIAN");
 print "LITTLE_ENDIAN: ", custom("sysinfo", "LITTLE_ENDIAN");
 print "LONG_BITS: ", custom("sysinfo", "LONG_BITS");
 print "LONGLONG_BITS: ", custom("sysinfo", "LONGLONG_BITS");
+print "Calc sizes:";
+show sizes;

file.c

@@ -115,15 +115,14 @@ file_init(void)
 		 */
 		if (fstat(i, &sbuf) >= 0) {
 			fp = (FILE *) fdopen(i,"r+");	/*guess mode*/
-			if (fp)
+			if (fp) {
 				strcpy(files[idnum].mode, "r+");
-			else {
+			} else {
 				fp = (FILE *) fdopen(i, "r");
 				if (fp) {
 					strcpy(files[idnum].mode, "r");
 					files[idnum].writing = FALSE;
-				}
-				else {
+				} else {
 					fp = (FILE *) fdopen(i, "w");
 					if (fp) {
 						strcpy(files[idnum].mode, "w?");
@@ -890,8 +889,9 @@ idprintf(FILEID id, char *fmt, int count, VALUE **vals)
 						    NULL)
 							math_chr(*vp->v_nblock->
 								 blk->data);
-					} else
+					} else {
 						printvalue(vp, PRINT_NORMAL);
+					}
 					break;
 				default:
 					printvalue(vp, PRINT_NORMAL);
@@ -1770,8 +1770,7 @@ showfiles(void)
 		if (fstat(fileno(fp), &sbuf) < 0) {
 			printf("Bad fstat for file %d\n", (int) fiop->id);
 			sizes[i] = -1;
-		}
-		else {
+		} else {
 			inodes[i] = sbuf.st_ino;
 			sizes[i] = (long) sbuf.st_size;
 		}
@@ -2229,15 +2228,16 @@ freadnum(FILE *fp, VALUE *valptr)
 			ch = fgetc(fp);
 		}
 	}
-	if (ch == 'i' || ch == 'I')
+	if (ch == 'i' || ch == 'I') {
 		imag = TRUE;
-	else {
+	} else {
 		ungetc(ch, fp);
 	}
 
 	if (ziszero(num)) {
 		zfree(num);
 		val.v_type = V_NUM;
+		val.v_subtype = V_NOSUBTYPE;
 		val.v_num = qlink(&_qzero_);
 		*valptr = val;
 		return;
@@ -2282,11 +2282,11 @@ freadnum(FILE *fp, VALUE *valptr)
 		c->imag = q;
 		val.v_type = V_COM;
 		val.v_com = c;
-	}
-	else {
+	} else {
 		val.v_type = V_NUM;
 		val.v_num = q;
 	}
+	val.v_subtype = V_NOSUBTYPE;
 	*valptr = val;
 }
 
@@ -2471,9 +2471,9 @@ fsearch(FILEID id, char *str, ZVALUE start, ZVALUE end, ZVALUE *res)
 			}
 			(void) f_seek_set(fiop->fp, &cur);
 		}
-		if (*tmp.v)
+		if (*tmp.v) {
 			(*tmp.v)--;
-		else {
+		} else {
 			if (tmp.len == 1)
 				break;
 			k = 0;

have_const.c

@@ -46,16 +46,21 @@ int
 main(void)
 {
 #if defined(HAVE_NO_CONST)
+
 	printf("#undef HAVE_CONST /* no */\n");
 	printf("#undef CONST\n");
 	printf("#define CONST /* no */\n");
+
 #else /* HAVE_NO_CONST */
+
 	const char * const str = "const";
 
 	printf("#define HAVE_CONST /* yes */\n");
 	printf("#undef CONST\n");
 	printf("#define CONST %s /* yes */\n", str);
+
 #endif /* HAVE_NO_CONST */
+
 	/* exit(0); */
 	return 0;
 }

have_getpgid.c

@@ -0,0 +1,60 @@
+/*
+ * have_getpgid - Determine if we getpgid()
+ *
+ * usage:
+ *	have_getpgid
+ *
+ * Not all systems have the getpgid() function, so this may not
+ * compile on your system.
+ *
+ * This prog outputs several defines:
+ *
+ *	HAVE_GETPGID
+ *		defined ==> use getpgid()
+ *		undefined ==> do not or cannot call getpgid()
+ */
+/*
+ * Copyright (c) 1999 by Landon Curt Noll.  All Rights Reserved.
+ *
+ * Permission to use, copy, modify, and distribute this software and
+ * its documentation for any purpose and without fee is hereby granted,
+ * provided that the above copyright, this permission notice and text
+ * this comment, and the disclaimer below appear in all of the following:
+ *
+ *	supporting documentation
+ *	source copies
+ *	source works derived from this source
+ *	binaries derived from this source or from derived source
+ *
+ * LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
+ * EVENT SHALL LANDON CURT NOLL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ *
+ * chongo was here	/\../\
+ */
+
+#include <sys/types.h>
+#include <unistd.h>
+
+int
+main(void)
+{
+#if defined(HAVE_NO_GETPGID)
+
+	printf("#undef HAVE_GETPGID /* no */\n");
+
+#else /* HAVE_NO_GETPGID */
+
+	(void) getpgid((pid_t)0);
+
+	printf("#define HAVE_GETPGID /* yes */\n");
+
+#endif /* HAVE_NO_GETPGID */
+
+	/* exit(0); */
+	return 0;
+}

have_getprid.c

@@ -0,0 +1,59 @@
+/*
+ * have_getprid - Determine if we getprid()
+ *
+ * usage:
+ *	have_getprid
+ *
+ * Not all systems have the getprid() function, so this may not
+ * compile on your system.
+ *
+ * This prog outputs several defines:
+ *
+ *	HAVE_GETPRID
+ *		defined ==> use getprid()
+ *		undefined ==> do not or cannot call getprid()
+ */
+/*
+ * Copyright (c) 1999 by Landon Curt Noll.  All Rights Reserved.
+ *
+ * Permission to use, copy, modify, and distribute this software and
+ * its documentation for any purpose and without fee is hereby granted,
+ * provided that the above copyright, this permission notice and text
+ * this comment, and the disclaimer below appear in all of the following:
+ *
+ *	supporting documentation
+ *	source copies
+ *	source works derived from this source
+ *	binaries derived from this source or from derived source
+ *
+ * LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
+ * EVENT SHALL LANDON CURT NOLL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ *
+ * chongo was here	/\../\
+ */
+
+#include <sys/types.h>
+#include <unistd.h>
+
+int
+main(void)
+{
+#if defined(HAVE_NO_GETPRID)
+
+	printf("#undef HAVE_GETPRID /* no */\n");
+
+#else /* HAVE_NO_GETPRID */
+
+	(void) getprid();
+	printf("#define HAVE_GETPRID /* yes */\n");
+
+#endif /* HAVE_NO_GETPRID */
+
+	/* exit(0); */
+	return 0;
+}

have_getsid.c

@@ -0,0 +1,59 @@
+/*
+ * have_getsid - Determine if we getsid()
+ *
+ * usage:
+ *	have_getsid
+ *
+ * Not all systems have the getsid() function, so this may not
+ * compile on your system.
+ *
+ * This prog outputs several defines:
+ *
+ *	HAVE_GETSID
+ *		defined ==> use getsid()
+ *		undefined ==> do not call or cannot call getsid()
+ */
+/*
+ * Copyright (c) 1999 by Landon Curt Noll.  All Rights Reserved.
+ *
+ * Permission to use, copy, modify, and distribute this software and
+ * its documentation for any purpose and without fee is hereby granted,
+ * provided that the above copyright, this permission notice and text
+ * this comment, and the disclaimer below appear in all of the following:
+ *
+ *	supporting documentation
+ *	source copies
+ *	source works derived from this source
+ *	binaries derived from this source or from derived source
+ *
+ * LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
+ * EVENT SHALL LANDON CURT NOLL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ *
+ * chongo was here	/\../\
+ */
+
+#include <sys/types.h>
+
+int
+main(void)
+{
+#if defined(HAVE_NO_GETSID)
+
+	printf("#undef HAVE_GETSID /* no */\n");
+
+#else /* HAVE_NO_GETSID */
+
+	(void) getsid((pid_t)0);
+
+	printf("#define HAVE_GETSID /* yes */\n");
+
+#endif /* HAVE_NO_GETSID */
+
+	/* exit(0); */
+	return 0;
+}

have_gettime.c

@@ -0,0 +1,74 @@
+/*
+ * have_gettime - Determine if we clock_gettime()
+ *
+ * usage:
+ *	have_gettime
+ *
+ * Not all systems have the clock_gettime() function, so this may not
+ * compile on your system.
+ *
+ * This prog outputs several defines:
+ *
+ *	HAVE_GETTIME
+ *		defined ==> use clock_gettime() for either CLOCK_SGI_CYCLE
+ *			    and/or CLOCK_REALTIME
+ *		undefined ==> clock_gettime() is not available for both
+ *			      CLOCK_SGI_CYCLE and CLOCK_REALTIME
+ */
+/*
+ * Copyright (c) 1999 by Landon Curt Noll.  All Rights Reserved.
+ *
+ * Permission to use, copy, modify, and distribute this software and
+ * its documentation for any purpose and without fee is hereby granted,
+ * provided that the above copyright, this permission notice and text
+ * this comment, and the disclaimer below appear in all of the following:
+ *
+ *	supporting documentation
+ *	source copies
+ *	source works derived from this source
+ *	binaries derived from this source or from derived source
+ *
+ * LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
+ * EVENT SHALL LANDON CURT NOLL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ *
+ * chongo was here	/\../\
+ */
+
+#include <time.h>
+
+int
+main(void)
+{
+#if defined(HAVE_NO_GETTIME)
+
+	printf("#undef HAVE_GETTIME /* no */\n");
+
+#else /* HAVE_NO_GETTIME */
+
+# if defined(CLOCK_SGI_CYCLE)
+
+	struct timespec sgi_cycle;	/* SGI hardware clock */
+	(void) clock_gettime(CLOCK_SGI_CYCLE, &sgi_cycle);
+	printf("#define HAVE_GETTIME /* yes - w/CLOCK_SGI_CYCLE */\n");
+
+# elif defined(CLOCK_REALTIME)
+
+	struct timespec realtime;	/* POSIX realtime clock */
+	(void) clock_gettime(CLOCK_REALTIME, &realtime);
+	printf("#define HAVE_GETTIME /* yes - CLOCK_REALTIME only */\n");
+
+# else
+
+	printf("#undef HAVE_GETTIME /* no - no SGI_CYCLE and no REALTIME */\n");
+
+# endif /* CLOCK_REALTIME */
+
+#endif /* HAVE_NO_GETTIME */
+	/* exit(0); */
+	return 0;
+}

have_memmv.c

@@ -2,7 +2,7 @@
  * have_memmv - Determine if we memmove()
  *
  * usage:
- *	have_newstr
+ *	have_memmv
  *
  * Not all systems with memcpy() have memmove() functions, so this may not
  * compile on your system.
@@ -48,12 +48,17 @@ int
 main(void)
 {
 #if defined(HAVE_NO_MEMMOVE)
+
 	printf("#undef HAVE_MEMMOVE /* no */\n");
+
 #else /* HAVE_NO_MEMMOVE */
+
 	(void) memmove(dest, src, MOVELEN);
 
 	printf("#define HAVE_MEMMOVE /* yes */\n");
+
 #endif /* HAVE_NO_MEMMOVE */
+
 	/* exit(0); */
 	return 0;
 }

have_newstr.c

@@ -50,14 +50,19 @@ int
 main(void)
 {
 #if defined(HAVE_NO_NEWSTR)
+
 	printf("#undef HAVE_NEWSTR /* no */\n");
+
 #else /* HAVE_NO_NEWSTR */
+
 	(void) memcpy(dest, src, MOVELEN);
 	(void) memset(dest, 0, MOVELEN);
 	(void) strchr(src, 'e');
 
 	printf("#define HAVE_NEWSTR /* yes */\n");
+
 #endif /* HAVE_NO_NEWSTR */
+
 	/* exit(0); */
 	return 0;
 }

have_rusage.c

@@ -0,0 +1,62 @@
+/*
+ * have_rusage - Determine if we getrusage()
+ *
+ * usage:
+ *	have_rusage
+ *
+ * Not all systems have the getrusage() function, so this may not
+ * compile on your system.
+ *
+ * This prog outputs several defines:
+ *
+ *	HAVE_GETRUSAGE
+ *		defined ==> use getrusage()
+ *		undefined ==> do not call or cannot call getrusage()
+ */
+/*
+ * Copyright (c) 1999 by Landon Curt Noll.  All Rights Reserved.
+ *
+ * Permission to use, copy, modify, and distribute this software and
+ * its documentation for any purpose and without fee is hereby granted,
+ * provided that the above copyright, this permission notice and text
+ * this comment, and the disclaimer below appear in all of the following:
+ *
+ *	supporting documentation
+ *	source copies
+ *	source works derived from this source
+ *	binaries derived from this source or from derived source
+ *
+ * LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
+ * EVENT SHALL LANDON CURT NOLL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ *
+ * chongo was here	/\../\
+ */
+
+#include <sys/time.h>
+#include <sys/resource.h>
+
+int
+main(void)
+{
+#if defined(HAVE_NO_GETRUSAGE)
+
+	printf("#undef HAVE_GETRUSAGE /* no */\n");
+
+#else /* HAVE_NO_GETRUSAGE */
+
+	struct rusage rusage;		/* resource utilization */
+
+	(void) getrusage(RUSAGE_SELF, &rusage);
+
+	printf("#define HAVE_GETRUSAGE /* yes */\n");
+
+#endif /* HAVE_NO_GETRUSAGE */
+
+	/* exit(0); */
+	return 0;
+}

have_strdup.c

@@ -0,0 +1,62 @@
+/*
+ * have_strdup - Determine if we strdup()
+ *
+ * usage:
+ *	have_strdup
+ *
+ * Not all systems have the strdup() function, so this may not
+ * compile on your system.
+ *
+ * This prog outputs several defines:
+ *
+ *	HAVE_STRDUP
+ *		defined ==> use strdup()
+ *		undefined ==> do not call or cannot call strdup()
+ */
+/*
+ * Copyright (c) 1999 by Landon Curt Noll.  All Rights Reserved.
+ *
+ * Permission to use, copy, modify, and distribute this software and
+ * its documentation for any purpose and without fee is hereby granted,
+ * provided that the above copyright, this permission notice and text
+ * this comment, and the disclaimer below appear in all of the following:
+ *
+ *	supporting documentation
+ *	source copies
+ *	source works derived from this source
+ *	binaries derived from this source or from derived source
+ *
+ * LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
+ * EVENT SHALL LANDON CURT NOLL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ *
+ * chongo was here	/\../\
+ */
+
+#include <string.h>
+
+int
+main(void)
+{
+#if defined(HAVE_NO_STRDUP)
+
+	printf("#undef HAVE_STRDUP /* no */\n");
+
+#else /* HAVE_NO_STRDUP */
+
+	char *p;
+
+	p = strdup("#define HAVE_STRDUP /* yes */");
+	if (p != NULL) {
+		printf("%s\n", p);
+	}
+
+#endif /* HAVE_NO_STRDUP */
+
+	/* exit(0); */
+	return 0;
+}

have_uid_t.c

@@ -51,15 +51,20 @@ int
 main(void)
 {
 #if defined(HAVE_NO_UID_T)
+
 	printf("#undef HAVE_UID_T /* no */\n");
+
 #else /* HAVE_NO_UID_T */
+
 	uid_t curds;
 	extern uid_t geteuid();
 
 	curds = geteuid();
 
 	printf("#define HAVE_UID_T /* yes */\n");
+
 #endif /* HAVE_NO_UID_T */
+
 	/* exit(0); */
 	return 0;
 }

have_ustat.c

@@ -0,0 +1,65 @@
+/*
+ * have_ustat - Determine if we ustat()
+ *
+ * usage:
+ *	have_ustat
+ *
+ * Not all systems have the ustat() function, so this may not
+ * compile on your system.
+ *
+ * This prog outputs several defines:
+ *
+ *	HAVE_USTAT
+ *		defined ==> use ustat()
+ *		undefined ==> do not call or cannot call ustat()
+ */
+/*
+ * Copyright (c) 1999 by Landon Curt Noll.  All Rights Reserved.
+ *
+ * Permission to use, copy, modify, and distribute this software and
+ * its documentation for any purpose and without fee is hereby granted,
+ * provided that the above copyright, this permission notice and text
+ * this comment, and the disclaimer below appear in all of the following:
+ *
+ *	supporting documentation
+ *	source copies
+ *	source works derived from this source
+ *	binaries derived from this source or from derived source
+ *
+ * LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
+ * EVENT SHALL LANDON CURT NOLL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ *
+ * chongo was here	/\../\
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <ustat.h>
+
+int
+main(void)
+{
+#if defined(HAVE_NO_USTAT)
+
+	printf("#undef HAVE_USTAT /* no */\n");
+
+#else /* HAVE_NO_USTAT */
+
+	struct stat stat_dot;		/* stat of "." */
+	struct ustat ustat_dot;		/* usage stat of "." */
+
+	(void) stat(".", &stat_dot);
+	(void) ustat(stat_dot.st_dev, &ustat_dot);
+
+	printf("#define HAVE_USTAT /* yes */\n");
+
+#endif /* HAVE_NO_USTAT */
+
+	/* exit(0); */
+	return 0;
+}

have_varvs.c

@@ -57,11 +57,13 @@ try_this(char *fmt, ...)
     va_list ap;
 
     va_start(ap);
+
 #if !defined(DONT_HAVE_VSPRINTF)
     vsprintf(buf, fmt, ap);
 #else
     sprintf(buf, fmt, ap);
 #endif
+
     va_end(ap);
 }
 

help.c

@@ -121,9 +121,8 @@ givehelp(char *type)
 	    "else %s no such help, try: help help;fi",
 	    HELPDIR, type, pager, HELPDIR, type,
 	    CUSTOMHELPDIR, type, pager, CUSTOMHELPDIR, type, ECHO);
-	if (conf->calc_debug > 0) {
+	if (conf->calc_debug & CALCDBG_SYSTEM) {
 		printf("%s\n", helpcmd);
-		sleep(3);
 	}
 
 	/* execute the help command */

help/Makefile

@@ -35,13 +35,12 @@ Q=@
 
 # standard tools
 #
-NATIVE_CC= cc
-NATIVE_CFLAGS=
+LCC= cc
+ICFLAGS=
+ILDFLAGS=
 SED= sed
 SORT= sort
 FMT= fmt
-CMP= cmp
-CAT= cat
 
 # Standard and Builtin help files
 #
@@ -105,29 +104,30 @@ BLT_HELP_FILES= ${BLT_HELP_FILES_3} ${BLT_HELP_FILES_5} \
 # This list is prodiced by the detaillist rule when no WARNINGS are detected.
 #
 DETAIL_HELP= abs access acos acosh acot acoth acsc acsch address agd append \
-	appr arg arrow asec asech asin asinh assign atan atan2 atanh avg base \
-	bit blk blkcpy blkfree blocks bround btrunc ceil cfappr cfsim char \
-	cmdbuf cmp comb conj cos cosh cot coth count cp csc csch ctime delete \
-	den dereference det digit digits dp epsilon errcount errmax errno \
-	error eval exp fact factor fclose fcnt feof ferror fflush fgetc \
-	fgetfield fgetline fgets fgetstr fib files floor fopen forall fprintf \
-	fputc fputs fputstr frac free freeglobals freeredc freestatics frem \
-	freopen fscan fscanf fseek fsize ftell gcd gcdrem gd getenv hash head \
-	highbit hmean hnrmod hypot ilog ilog10 ilog2 im insert int inverse \
-	iroot isassoc isatty isblk isconfig isdefined iserror iseven isfile \
-	ishash isident isint islist ismat ismult isnull isnum isobj isobjtype \
-	isodd isprime isptr isqrt isrand israndom isreal isrel issimple issq \
-	isstr istype jacobi join lcm lcmfact lfactor ln lowbit ltol makelist \
-	matdim matfill matmax matmin matsum mattrace mattrans max md5 memsize \
-	meq min minv mmin mne mod modify name near newerror nextcand \
-	nextprime norm null num oldvalue ord param perm pfact pi pix places \
-	pmod polar poly pop popcnt power prevcand prevprime printf prompt \
-	protect ptest push putenv quo quomod rand randbit random randombit \
-	randperm rcin rcmul rcout rcpow rcsq re remove reverse rewind rm root \
-	round rsearch runtime saveval scale scan scanf search sec sech seed \
-	segment select sgn sha sha1 sin sinh size sizeof sort sqrt srand \
-	srandom ssq str strcat strerror strlen strpos strprintf strscan \
-	strscanf substr sum swap system tail tan tanh test time trunc xor
+	appr arg arrow asec asech asin asinh assign atan atan2 atanh avg \
+	base bit blk blkcpy blkfree blocks bround btrunc calclevel ceil \
+	cfappr cfsim char cmdbuf cmp comb conj cos cosh cot coth count cp \
+	csc csch ctime delete den dereference det digit digits dp epsilon \
+	errcount errmax errno error eval exp fact factor fclose fcnt feof \
+	ferror fflush fgetc fgetfield fgetline fgets fgetstr fib files \
+	floor fopen forall fprintf fputc fputs fputstr frac free freeglobals \
+	freeredc freestatics frem freopen fscan fscanf fseek fsize ftell gcd \
+	gcdrem gd getenv hash head highbit hmean hnrmod hypot ilog ilog10 \
+	ilog2 im inputlevel insert int inverse iroot isassoc isatty isblk \
+	isconfig isdefined iserror iseven isfile ishash isident isint islist \
+	ismat ismult isnull isnum isobj isobjtype isodd isprime isptr isqrt \
+	isrand israndom isreal isrel issimple issq isstr istype jacobi join \
+	lcm lcmfact lfactor ln lowbit ltol makelist matdim matfill matmax \
+	matmin matsum mattrace mattrans max md5 memsize meq min minv mmin \
+	mne mod modify name near newerror nextcand nextprime norm null \
+	num oldvalue ord param perm pfact pi pix places pmod polar poly \
+	pop popcnt power prevcand prevprime printf prompt protect ptest \
+	push putenv quo quomod rand randbit random randombit randperm rcin \
+	rcmul rcout rcpow rcsq re remove reverse rewind rm root round rsearch \
+	runtime saveval scale scan scanf search sec sech seed segment select \
+	sgn sha sha1 sin sinh size sizeof sort sqrt srand srandom ssq str \
+	strcat strerror strlen strpos strprintf strscan strscanf substr \
+	sum swap system tail tan tanh test time trunc xor
 
 # This list is of files that are clones of DETAIL_HELP files.  They are
 # built from DETAIL_HELP files.
@@ -233,7 +233,7 @@ bugs: ../BUGS
 
 errorcodes: ../calcerr.h errorcodes.hdr errorcodes.sed
 	rm -f $@
-	${CAT} errorcodes.hdr > $@
+	cat errorcodes.hdr > $@
 	${SED} -n -f errorcodes.sed < ../calcerr.h >> $@
 	chmod 0444 $@
 	-@if [ -z "${Q}" ]; then \
@@ -258,7 +258,7 @@ calc: usage
 
 custom_cal: ../custom/CUSTOM_CAL
 	rm -f $@
-	cp usage $@
+	cp ../custom/CUSTOM_CAL $@
 	chmod 0444 $@
 	-@if [ -z "${Q}" ]; then \
 	    echo ''; \
@@ -270,7 +270,7 @@ custom_cal: ../custom/CUSTOM_CAL
 
 new_custom: ../custom/HOW_TO_ADD
 	rm -f $@
-	cp usage $@
+	cp ../custom/HOW_TO_ADD $@
 	chmod 0444 $@
 	-@if [ -z "${Q}" ]; then \
 	    echo ''; \
@@ -282,7 +282,7 @@ new_custom: ../custom/HOW_TO_ADD
 
 copy: blkcpy
 	rm -f $@
-	cp usage $@
+	cp blkcpy $@
 	chmod 0444 $@
 	-@if [ -z "${Q}" ]; then \
 	    echo ''; \
@@ -358,17 +358,13 @@ ${SINGULAR_FILES}: ${PLURAL_FILES}
 #
 builtin: builtin.top builtin.end ../func.c funclist.sed
 	${Q}echo "forming builtin help file"
-	-${Q}rm -f builtin
-	${Q}cat builtin.top > builtin
 	-${Q}rm -f funclist.c
 	${Q}${SED} -n -f funclist.sed ../func.c > funclist.c
-
-	-${Q}rm -f ../funclist.c ../funclist.o ../funclist funclist
-	${Q}cp funclist.c ..
-	-${Q}(cd ..; \
-	 ${NATIVE_CC} ${NATIVE_CFLAGS} -DFUNCLIST funclist.c -o funclist; \
-	 mv funclist help; \
-	 rm -f funclist.c funclist.o funclist)
+	-${Q}rm -f funclist.o funclist
+	${Q}${LCC} ${ICFLAGS} -DFUNCLIST -I/usr/include -I.. funclist.c -c
+	${Q}${LCC} ${ILDFLAGS} funclist.o -o funclist
+	-${Q}rm -f builtin
+	${Q}cat builtin.top > builtin
 	${Q}./funclist | \
 	    ${SED} -e 's/^/	/' -e 's/[	 ][	 ]*$$//' >> builtin
 	${Q}cat builtin.end >> builtin
@@ -393,15 +389,11 @@ builtin: builtin.top builtin.end ../func.c funclist.sed
 
 distlist: ${DISTLIST}
 	${Q}for i in ${DISTLIST}; do \
-		echo calc/help/$$i; \
+		echo help/$$i; \
 	done | ${SORT}
 
-# The bsdi distribution has generated files as well as distributed files.
-#
-bsdilist: ${DISTLIST} ${BLT_HELP_FILES}
-	${Q}for i in ${DISTLIST} ${BLT_HELP_FILES}; do \
-		echo calc/help/$$i; \
-	done | ${SORT}
+distdir:
+	${Q}echo help
 
 # The BSDI cdrom makefile expects all help files to be pre-built.  This rule
 # creats these fils so that the release can be shipped off to BSDI.  You can
@@ -416,8 +408,8 @@ bsdi: all
 detaillist:
 	${Q}-(echo "xxxxx"; \
 	   for i in ${DETAIL_HELP}; do \
-		if [ ! -f SCCS/s.$$i ]; then \
-		    echo "WARNING: $$i not under SCCS control" 1>&2; \
+		if [ ! -f RCS/$$i,v ]; then \
+		    echo "WARNING: $$i not under RCS control" 1>&2; \
 		else \
 		    echo $$i; \
 		fi; \

help/archive

@@ -1,28 +1,16 @@
 Where to get the the latest versions of calc
 
-    Landon Noll maintains the official calc ftp archive at:
-
-	ftp://ftp.uu.net/pub/calc
-
-    Alpha test versions, complete with bugs, untested code and
-    experimental features may be fetched (if you are brave) under:
+    Landon Noll maintains the official calc home page at:
 
 	    http://reality.sgi.com/chongo/tech/comp/calc/
 
-    One may join the calc testing group by sending a request to:
+    See:
 
-	calc-tester-request@postofc.corp.sgi.com
+	    http://reality.sgi.com/chongo/tech/comp/calc/calc-download.html
 
-    Your message body (not the subject) should consist of:
-
-	subscribe calc-tester address
-	end
-	name your_full_name
-
-    where "address" is your EMail address and "your_full_name"
-    is your full name.
+    for information on how to obtain up a recent version of calc.
 
 Landon Curt Noll
-http://reality.sgi.com/chongo
+http://reality.sgi.com/chongo/
 
 chongo <was here> /\../\

help/calclevel

@@ -0,0 +1,35 @@
+NAME
+    calclevel - current calculation level
+
+SYNOPSIS
+    calclevel()
+
+TYPES
+    return	nonnegative integer
+
+DESCRIPTION
+    This function returns the calculation level at which it is called.
+    When a command is being read from a terminal or from a file,
+    calc is at calculation level zero.	The level is increased
+    by 1 each time calculation starts of a user-defined function
+    or of eval(S) for some expression S which evaluates to a string.  It
+    decreases to zero if an error occurs or a quit or abort statement
+    is executed.  Otherwise, it decreases by 1 when the calculation
+    is completed.  Except when an error occurs or abort is executed,
+    the input level is not affected by changes in the calculation level.
+
+    Zero calculation level is also called top calculation level; greater
+    values of calclevel() indicate calculation is occurring at greater
+    depths.
+
+EXAMPLE
+    n/a
+
+LIMITS
+    none
+
+LIBRARY
+    none
+
+SEE ALSO
+    eval, read, quit, abort, inputlevel

help/command

@@ -14,12 +14,10 @@ Command sequence
     described in the next section.
 
 
-    NOTE: Calc commands are in lower case.   UPPER case is used below
-	  for emphasis only, and should be considered in lower case.
-
-
-    DEFINE function(params) { body }
-    DEFINE function(params) = expression
+    define a function
+    -----------------
+    define function(params) { body }
+    define function(params) = expression
 	    This first form defines a full function which can consist
 	    of declarations followed by many statements which implement
 	    the function.
@@ -30,13 +28,22 @@ Command sequence
 	    and question mark operators can be useful.	Examples of
 	    simple functions are:
 
-		    define sumcubes(a, b) = a^3 + b^3;
-		    define pimod(a) = a % pi();
+		    define sumcubes(a, b) = a^3 + b^3
+		    define pimod(a) = a % pi()
+		    define printnum(a, n, p)
+		    {
+			if (p == 0) {
+			    print a: "^": n, "=", a^n;
+			} else {
+			    print a: "^": n, "mod", p, "=", pmod(a,n,p);
+			}
+		    }
 
-    HELP
-	    This displays a general help message.
 
-    READ filename
+    read calc commands
+    ------------------
+    read filename
+    read -once filename
 	    This reads definitions from the specified filename.
 	    The name can be quoted if desired.	The calculator
 	    uses the CALCPATH environment variable to search
@@ -52,14 +59,11 @@ Command sequence
 	    evaluate or functions to define, just like at the top
 	    level command level.
 
-	    If the -m mode disallows opening of files for reading,
-	    this command will be disabled.
+	    When -once is given, the read command acts like the regular
+	    read expect that it will ignore filename if is has been
+	    previously read.
 
-    READ -once filename
-	    This command acts like the regular READ expect that it
-	    will ignore filename if is has been previously read.
-
-	    This command is particularly useful in a library that
+	    The read -once form is particularly useful in a library that
 	    needs to read a 2nd library.  By using the READ -once
 	    command, one will not reread that 2nd library, nor will
 	    once risk entering into a infinite READ loop (where
@@ -69,7 +73,10 @@ Command sequence
 	    If the -m mode disallows opening of files for reading,
 	    this command will be disabled.
 
-    WRITE filename
+
+    write calc commands
+    -------------------
+    write filename
 	    This writes the values of all global variables to the
 	    specified filename, in such a way that the file can be
 	    later read in order to recreate the variable values.
@@ -81,19 +88,221 @@ Command sequence
 	    If the -m mode disallows opening of files for writing,
 	    this command will be disabled.
 
-    QUIT
-	    This leaves the calculator, when given as a top-level
-	    command.
 
-    CD
-	    Change the current directory to the home directory, if $HOME
+    quit or exit
+    ------------
+    quit
+    quit string
+    exit
+    exit string
+	    The action of these commands depends on where they are used.
+	    At the interactive level, they will cause calc it edit.
+	    This is the normal way to leave the calculator.  In any
+	    other use, they will stop the current calculation as if
+	    an error had occurred.
+
+	    If a string is given, then the string is printed as the reason
+	    for quitting, otherwise a general quit message is printed.
+	    The routine name and line number which executed the quit is
+	    also printed in either case.
+
+	    Exit is an alias for quit.
+
+	    Quit is useful when a routine detects invalid arguments,
+	    in order to stop a calculation cleanly.  For example,
+	    for a square root routine, an error can be given if the
+	    supplied parameter was a negative number, as in:
+
+		    define mysqrt(n)
+		    {
+			if (! isnum(n))
+			    quit "non-numeric argument";
+			if (n < 0)
+			    quit "Negative argument";
+			return sqrt(n);
+		    }
+
+	    See 'more information about abort and quit' below for
+	    more information.
+
+
+
+    abort
+    -----
+    abort
+    abort string
+	    This command behaves like QUIT except that it will attempt
+	    to return to the interactive level if permitted, otherwise
+	    calc exit.
+
+	    See 'more information about abort and quit' below for
+	    more information.
+
+
+    change current directory
+    ------------------------
+    cd
+    cd dir
+	    Change the current directory to 'dir'.  If 'dir' is ommitted,
+	    change the current directory to the home directory, if $HOME
 	    is set in the environment.
 
-    CD dir
-	    Change the current directory to dir.
+
+    show information
+    ----------------
+    show item
+	    This command displays some information where 'item' is
+	    one of the following:
+
+		    blocks		unfreed named blocks
+		    builtin		built in functions
+		    config		config parameters and values
+		    constants		cache of numeric constants
+		    custom		custom functions if calc -C was used
+		    errors		new error-values created
+		    files		open files, file position and sizes
+		    function		user-defined functions
+		    globaltypes		global variables
+		    objfunctions	possible object functions
+		    objtypes		defined objects
+		    opcodes func	internal opcodes for function `func'
+		    sizes		size in octets of calc value types
+		    realglobals		numeric global variables
+		    statics		unscoped static variables
+		    numbers		calc number cache
+		    redcdata		REDC data defined
+		    strings		calc string cache
+		    literals		calc literal cache
+
+	    Only the first 4 characters of item are examined, so:
+
+		    show globals
+		    show global
+		    show glob
+
+	    do the same thing.
+
+
+    calc help
+    ---------
+    help
+    help name
+	    This displays a help related to 'name' or general
+	    help of none is given.
+
+
+    =-=
+
+
+    more information about abort and quit
+    =====================================
+
+    Consider the following calc file called myfile.cal:
+
+	print "start of myfile.cal";
+	define q() {quit "quit from q()"; print "end of q()"}
+	define a() {abort "abort from a()"}
+	x = 3;
+	{print "start #1"; if (x > 1) q()} print "after #1";
+	{print "start #2"; if (x > 1) a()} print "after #2";
+	{print "start #3"; if (x > 1) quit "quit from 3rd statement"}
+	print "end of myfile.cal";
+
+    The command:
+
+	calc read myfile
+
+    will produce:
+
+	q() defined
+	a() defined
+	start statment #1
+	quit from q()
+	after statment #1
+	start statment #2
+	abort from a()
+
+    The QUIT within the q() function prevented the ``end of q()''
+    statement from being evaluated.  This QUIT command caused
+    control to be returned to just after the place where q()
+    was called.
+
+    Notice that unlike QUIT, the ABORT inside function a() halts
+    the processing of statements from the input source (myfile.cal).
+    Because calc was not interactive, ABORT causes calc to exit.
+
+    The command:
+
+	calc -i read myfile
+
+    will produce:
+
+	q() defined
+	a() defined
+	start statment #1
+	quit from q()
+	after statment #1
+	start statment #2
+	abort from a()
+	>		<==== calc interactive prompt
+
+    because the '-i' calc causes ABORT to drop into an
+    interactive prompt.	 However typing a QUIT or ABORT
+    at the interactive prompt level will always calc to exit,
+    even when calc is invoked with '-i'.
+
+    Also observe that both of these commands:
+
+	cat myfile.cal | calc
+	cat myfile.cal | calc -i
+
+    will produce:
+
+	q() defined
+	a() defined
+	start statment #1
+	quit from q()
+	after statment #1
+	start statment #2
+	abort from a()
+
+    The ABORT inside function a() halts the processing of statements
+    from the input source (standard input).  Because standard input
+    is not a terminal, using '-i' does not force it to drop into
+    an interactive prompt.
+
+    If one were to type in the contents of myfile.cal interactively,
+    calc will produce:
+
+	> print "start of myfile.cal";
+	start of myfile.cal
+	> define q() {quit "quit from q()"; print "end of q()"}
+	q() defined
+	> define a() {abort "abort from a()"}
+	a() defined
+	> x = 3;
+	> {print "start #1"; if (x > 1) q()} print "after #1";
+	start statment #1
+	quit from q()
+	after statment #1
+	> {print "start #2"; if (x > 1) a()} print "after #2";
+	start statment #2
+	abort from a()
+	> {print "start #3"; if (x > 1) quit "quit from 3rd statement"}
+	start #3
+	quit from 3rd statement
+
+    The ABORT from within the a() function returned control to
+    the interactive level.
+
+    The QUIT (after the if (x > 1) ...) will cause calc to exit
+    because it was given at the interactive prompt level.
+
+
+    =-=
 
 
     Also see the help topic:
 
 	    statement	    flow control and declaration statements
-	    usage		for -m modes
+	    usage	    how to invoke the calc command and calc -options

help/config

@@ -40,9 +40,10 @@ Configuration parameters
 	    "blkverbose"	TRUE=>print all lines, FALSE=>skip duplicates
 	    "blkbase"		block output base
 	    "blkfmt"		block output format
-	    "lib_debug"		calc library script debug level
-	    "calc_debug"	internal calc debug level
-	    "user_debug"	user defined debug level
+	    "calc_debug"	controls internal calc debug information
+	    "lib_debug"		controls library script debug information
+	    "user_debug"	for user defined debug information
+	    "verbose_quit"	TRUE=>print message on empty quit or abort
 
 
     The "all" config value allows one to save/restore the configuration
@@ -78,7 +79,8 @@ Configuration parameters
     The "newstd" is not backward compatible with the historic
     configuration.  Even so, some people prefer this configuration
     and place the config("all", "newstd") command in their CALCRC
-    startup files.
+    startup files; newstd may also be established by invoking calc
+    with the flag -n.
 
     When nonzero, the "trace" parameter activates one or more features
     that may be useful for debugging.  These features correspond to
@@ -103,9 +105,12 @@ Configuration parameters
     the decimal point to be printed in real or exponential mode in
     normal unformatted printing (print, strprint, fprint) or in
     formatted printing (printf, strprintf, fprintf) when precision is not
-    specified.  The initial value is 20.  This parameter does not change
-    the stored value of a number.  Where rounding is necessary, the type
-    of rounding to be used is controlled by "outround".
+    specified.	The initial value for oldstd is 20, for newstd 10.
+    The parameter may be changed to the value d by either
+    config("display", d) or by display (d).  This parameter does not change
+    the stored value of a number.  Where rounding is necessary to
+    display up to d decimal places, the type of rounding to be used is
+    controlled by config("outround").
 
     The "epsilon" parameter specifies the default accuracy for the
     calculation of functions for which exact values are not possible or
@@ -118,9 +123,10 @@ Configuration parameters
     absolute value of the remainder usually does not exceed epsilon/2.
     Functions which require an epsilon value accept an
     optional argument which overrides this default epsilon value for
-    that single call.  (The value v can be assigned to the "epsilon"
-    parameter by epsilon(v) as well as by config("epsilon", v), and the
-    current value obtained by epsilon() as well as by config("epsilon").)
+    that single call.  The value v can be assigned to the "epsilon"
+    parameter by either config("epsilon", v) or epsilon(v); each of
+    these functions return the current epsilon value; config("epsilon")
+    or epsilon() returns but does not change the epsilon value.
     For the transcendental functions and the functions sqrt() and
     appr(), the calculated value is always a multiple of epsilon.
 
@@ -311,67 +317,87 @@ Configuration parameters
 
     The default "blkfmt" is "hd".
 
-    With regards to "lib_debug", "calc_debug" and "user_debug":
-    higher absolute values result in more detailed debugging and
-    more verbose debug messages.  The default value is 0 in which
-    a very amount of debugging will be performed with nil messages.
-    The -1 value is reserved for no debugging or messages.  Any
-    value <-1 will perform debugging silently (presumably collecting
-    data to be displayed at a later time).  Values >0 result in a
-    greater degree of debugging and more verbose messages.
+    The "calc_debug" is intended for controlling internal calc routines
+    that test its operation, or collect or display information that
+    might be useful for debug purposes.	 Much of the output from these
+    will make sense only to calc wizards.   Zero value (the default for
+    both oldstd and newstd) of config("lib_calc") corresponds to switching
+    off all these routines.  For nonzero value, particular bits
+    currently have the following meanings:
 
-    The "lib_debug" is reserved by convention for calc library scripts.
-    This config parameter takes the place of the lib_debug global variable.
-    By convention, "lib_debug" has the following meanings:
+	n		Meaning of bit n of config("calc_debug")
 
-	<-1	no debug messages are printed though some internal
-		    debug actions and information may be collected
+	0	outputs shell commands prior to execution
 
-	-1	no debug messages are printed, no debug actions will be taken
+	1	outputs currently active functions when a quit instruction
+		is executed
 
-	0	only usage message regarding each important object are
-		    printed at the time of the read (default)
+	2	some details of shs, shs1 and md5 hash states are included
+		in the output when these are printed
 
-	>0	messages regarding each important object are
-		    printed at the time of the read in addition
-		    to other debug messages
+	3	when a function constructs a block value, tests are
+		made that the result has the properties required for use of
+		that block, e.g. that the pointer to the start of the
+		block is not NULL, and that its "length" is not negative.
+		A failure will result in a runtime error.
 
-    The "calc_debug" is reserved by convention for internal calc routines.
-    The output of "calc_debug" will change from release to release.
-    Generally this value is used by calc wizards and by the regress.cal
-    routine (make check).  By convention, "calc_debug" has the following
-    meanings:
+	4	Report on changes to the state of stdin as well as changes
+		to internal variables that control the setting and restoring
+		of stdin.
 
-	<-1	reserved for future use
+	5	Report on changes to the run state of calc.
 
-	-1	no debug messages are printed, no debug actions will be taken
+    Bits >= 6 are reserved for future use and should not be used at this time.
 
-	0	very little, if any debugging is performed (and then mostly
-		    in alpha test code).  The only output is as a result of
-		    internal fatal errors (typically either math_error() or
-		    exit() will be called). (default)
+    By default, "calc_debug" is 0.  The initial value may be overridden
+    by the -D command line option.
 
-	>0	a greater degree of debugging is performed and more
-		    verbose messages are printed (regress.cal uses 1).
+    The "lib_debug" parameter is intended for controlling the possible
+    display of special information relating to functions, objects, and
+    other structures created by instructions in calc scripts.
+    Zero value of config("lib_debug") means that no such information
+    is displayed.  For other values, the non-zero bits which currently
+    have meanings are as follows:
+
+	n		Meaning of bit n of config("lib_debug")
+
+	0	When a function is defined, redefined or undefined at
+		interactive level, a message saying what has been done
+		is displayed.
+
+	1	When a function is defined, redefined or undefined during
+		the reading of a file, a message saying what has been done
+		is displayed.
+
+    The value for config("lib_debug") in both oldstd and newstd is 3,
+    but if calc is invoked with the -d flag, its initial value is zero.
+    Thus, if calc is started without the -d flag, until config("lib_debug")
+    is changed, a message will be output when a function is defined
+    either interactively or during the reading of a file.
+
+    By default, "lib_debug" is 3.  The -d flag changes this default to 0.
+    The initial value may be overridden by the -D command line option.
 
     The "user_debug" is provided for use by users.  Calc ignores this value
     other than to set it to 0 by default (for both "oldstd" and "newstd").
-    No calc code or shipped library will change this value other than
-    during startup or during a config("all", xyz) call.
+    No calc code or shipped library should change this value.  Users
+    should feel free to use it in any way.   In particular they may
+    use particular bits for special purposes as with "calc_debug", or
+    they may use it to indicate a debug level with larger values
+    indicating more stringent and more informative tests with presumably
+    slower operation or more memory usage, and a particular value (like
+    -1 or 0) corresponding to "no tests".
 
-    The following is suggested as a convention for use of "user_debug".
-    These are only suggestions: feel free to use it as you like:
+    By default, "user_debug" is 0.  The initial value may be overridden
+    by the -D command line option.
 
-	<-1	no debug messages are printed though some internal
-		    debug actions and information may be collected
+    The "verbose_quit" controls the print of the message:
 
-	-1	no debug messages are printed, no debug actions will be taken
+	Quit or abort executed
 
-	0	very little, if any debugging is performed.  The only output
-		    are from fatal errors. (default)
-
-	>0	a greater degree of debugging is performed and more
-		    verbose messages are printed
+    when a non-interactive quit or abort without an argument is encounted.
+    A quit of abort without an argument does not display a message when
+    invoked at the interactive level.
 
     The following are synonyms for true:
 

help/contrib

@@ -5,30 +5,27 @@ We welcome and encourage you to send us:
     * custom functions that you have modified or written
     * any other source code modifications
 
-Prior to doing so, you should consider trying your changes on the most
-recent alpha test code.  To obtain the most recent code, look under
+Prior to doing so, you should consider applying your changes to the most
+recent version of calc.
+
+Landon Noll maintains the official calc home page at:
 
 	http://reality.sgi.com/chongo/tech/comp/calc/
 
-You should also consider joining the calc testing group by sending a
-request to:
+See:
 
-	calc-tester-request@postofc.corp.sgi.com
+	http://reality.sgi.com/chongo/tech/comp/calc/calc-download.html
 
-    Your message body (not the subject) should consist of:
+for information on how to obtain up a recent version of calc.
 
-	subscribe calc-tester address
-	end
-	name your_full_name
-
-    where "address" is your EMail address and "your_full_name"
-    is your full name.
+=-=
 
 In order to consider integrating your code, we need:
 
-    * help files (documentation)
-    * CHANGES text (brief description of what it does)
-    * regress.cal test (to test non-custom code)
+    * the calc version you are working with (use the latest calc, see above)
+    * new help files or help file patches, if applicable (documentation)
+    * proposed text for the CHANGES file (brief description of what it does)
+    * regress.cal test patch, if applicable
     * your source code and/or source code changes (:-))
 
 The best way to send us new code, if your changes are small, is
@@ -39,13 +36,44 @@ gziped (or compressed) tar file).
 
 You should send submissions to:
 
-	calc-tester@postofc.corp.sgi.com
+    calc-tester at postofc dot corp dot sgi dot com
+
+    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
 
 Thanks for considering submitting code to calc.	 Calc is a collective
 work by a number of people.  It would not be what it is today without
 your efforts and submissions!
 
+Calc bug reports, however, should be sent to:
+
+    calc-bugs at postofc dot corp dot sgi dot com
+
+    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+
+See the BUGS file or try the help command:
+
+    help bugs
+
+for details on bug reporting.
+
+=-=
+
+One may join the calc testing group by sending a request to:
+
+	calc-tester-request at postofc dot corp dot sgi dot com
+
+	[[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+
+    Your message body (not the subject) should consist of:
+
+	subscribe calc-tester address
+	end
+	name your_full_name
+
+    where "address" is your EMail address and "your_full_name"
+    is your full name.
+
 Landon Curt Noll
-http://reality.sgi.com/chongo
+http://reality.sgi.com/chongo/
 
 chongo <was here> /\../\

help/credit

@@ -2,7 +2,11 @@ Credits
 
     The majority of calc was written by David I. Bell.
 
-    Calc archives and calc-tester mailing list maintained by Landon Curt Noll.
+    The Calc primary mirror, calc mailing list and calc bug report
+    processing is performed by Landon Curt Noll.
+
+    Landon Curt Noll maintains the master reference source, performs
+    release control functions as well as other calc maintenance functions.
 
     Thanks for suggestions and encouragement from Peter Miller,
     Neil Justusson, and Landon Noll.
@@ -22,41 +26,10 @@ Credits
 
     Most of this source and binary has one of the following copyrights:
 
-	    Copyright (c) 19xx David I. Bell
-	    Copyright (c) 19xx David I. Bell and Landon Curt Noll
-	    Copyright (c) 19xx Landon Curt Noll
-	    Copyright (c) 19xx Ernest Bowen and Landon Curt Noll
+	    Copyright (c) year David I. Bell
+	    Copyright (c) year David I. Bell and Landon Curt Noll
+	    Copyright (c) year Landon Curt Noll
+	    Copyright (c) year Ernest Bowen and Landon Curt Noll
 
     Permission is granted to use, distribute, or modify this source,
     provided that this copyright notice remains intact.
-
-    Send calc comments, suggestions, bug fixes, enhancements and
-    interesting calc scripts that you would like you see included in
-    future distributions to:
-
-	calc-tester@postofc.corp.sgi.com
-
-    Landon Noll maintains the official calc http/ftp archive at:
-
-	ftp://reality.sgi.com/users/chongo/src/calc
-	http://reality.sgi.com/chongo/src/calc/
-
-    Alpha test versions, complete with bugs, untested code and
-    experimental features may be fetched (if you are brave) under:
-
-	http://reality.sgi.com/chongo/tech/comp/calc/
-
-    One may join the calc testing group by sending a request to:
-
-	calc-tester-request@postofc.corp.sgi.com
-
-    Your message body (not the subject) should consist of:
-
-	subscribe calc-tester address
-	end
-	name your_full_name
-
-    where "address" is your EMail address and "your_full_name"
-    is your full name.
-
-    Enjoy!

help/environment

@@ -58,6 +58,10 @@ Environment variables
 	a terminal, then calc will still run, but fancy command line
 	editing is disabled.
 
+	NOTE: If calc was compiled with GNU-readline support, the
+	      CALCBINDINGS facility is ignored and the standard
+	      readline mechanisms (see readline(3)) are used.
+
     HOME
 
 	This value is taken to be the home directory of the

help/funclist.sed

@@ -3,7 +3,5 @@ s/NUMBER[	 ]*\*/int /
 s/NUMBER/int/
 s/STRINGHEAD/int/
 s/\(".*",.*,.*\),.*,.*,.*,.*,/\1, 0, 0, 0, 0,/
-/sed me out/d
-s/showbuiltins/main/
 s/[	 ][	 ]*$//
 p

help/hash

@@ -1,5 +1,5 @@
 NAME
-    hash - hash value
+    hash - FNV-1 hash value
 
 SYNOPSIS
     hash(x_1 [, x_2, x_3, ...])
@@ -12,10 +12,32 @@ TYPES
 DESCRIPTION
     Returns a hash value for one or more values of arbitrary types.
 
+    The basis of this hash algorithm was taken from an idea sent
+    as reviewer comments to the IEEE POSIX P1003.2 committee by:
+
+	 Phong Vo (http://www.research.att.com/info/kpv/)
+	 Glenn Fowler (http://www.research.att.com/~gsf/)
+
+    In a subsequent ballot round:
+
+	 Landon Curt Noll (http://reality.sgi.com/chongo/)
+
+    improved on their algorithm.  Some people tried this hash
+    and found that it worked rather well.  In an EMail message
+    to Landon, they named it ``Fowler/Noll/Vo'' or the FNV hash.
+
+    FNV hashes are architected to be fast while maintaining a low
+    collision rate. The FNV speed allows one to quickly hash lots
+    of data while maintaining a reasonable collision rate.  See:
+
+	 http://reality.sgi.com/chongo/tech/comp/fnv/
+
+    for more details as well as other forms of the FNV hash.
+
 EXAMPLE
     > a = isqrt(2e1000); s = "xyz";
     > hash(a,s)
-	    870000771
+	    2378490456
 
 LIMITS
     The number of arguments is not to exceed 100.
@@ -24,3 +46,4 @@ LIBRARY
     none
 
 SEE ALSO
+    sha, sha1, md5

help/inputlevel

@@ -0,0 +1,36 @@
+NAME
+    inputlevel - current input level
+
+SYNOPSIS
+    inputlevel()
+
+TYPES
+    return	nonnegative integer
+
+DESCRIPTION
+    This function returns the input level at which it is called.
+    When calc starts, it is at level zero.  The level is increased
+    by 1 each time execution starts of a read file command or a call to
+    eval(S) for some expression S which evaluates to a string.	It
+    decreases by 1 when a file being read reaches EOF or a string
+    being eval-ed reaches '\0', or earlier if a quit statement is
+    encountered at top calculation-level in the flle or string.	 It
+    decreases to zero if an abort statement is encountered at any
+    function-level in the file or string.  If a quit or abort
+    statement is encountered at top calculation-level at top input-level,
+    calc is exited.
+
+    Zero input level is also called top input level; greater values
+    of inputlevel() indicate reading at greater depths.
+
+EXAMPLE
+    n/a
+
+LIMITS
+    none
+
+LIBRARY
+    none
+
+SEE ALSO
+    read, eval, quit, abort, calclevel

help/overview

@@ -71,6 +71,10 @@
 
 	    help stdlib
 
+    To learn how to invoke the calc command and about calc -flags, try:
+
+	    help usage
+
     A full and extensive overview of calc may be obtained by:
 
 	    help full
@@ -160,5 +164,3 @@
     These can contain both functions to be defined, and expressions
     to be calculated.  Global variables which are numbers can be
     saved to a file by using the 'write filename' command.
-
-    XXX - update this file and add in new major features

help/seed

@@ -19,9 +19,9 @@ DESCRIPTION
 	is almost certainly non-chaotic.  This function is likely not
 	suitable for applications (such as cryptographic applications)
 	where the unpredictability of seeds is critical.  For such critical
-	applications, lavarand should be used.  Seed:
+	applications, lavarand should be used.	See the URL:
 
-		http://lavarand.sgi.com
+		http://lavarand.sgi.com/index.html
 
 	for information about seeding a pseudo-random number generator
 	(such as rand() or random()) with the cryptographic hash of the

help/srandom

@@ -222,8 +222,7 @@ DESCRIPTION
 	The pre-defined Blum moduli and quadratic residues were selected
 	by lavarand, a hardware random number generator.  See the URL:
 
-	    http://lavarand.sgi.com
-	    XXX - This URL is not available on 17Feb97 ... but will be soon.
+	    http://lavarand.sgi.com/index.html
 
 	for an explanation of how the lavarand random number generator works.
 	For more information, see the comments at the top of the calc

help/statement

@@ -10,28 +10,38 @@ Statements
     expressions are optional and may be omitted (as in RETURN).
 
 
-    NOTE: Calc commands are in lower case.   UPPER case is used below
-	  for emphasis only, and should be considered in lower case.
-
-
-    IF (expr) statement
-    IF (expr) statement ELSE statement
-    FOR (optionalexpr ; optionalexpr ; optionalexpr) statement
-    WHILE (expr) statement
-    DO statement WHILE (expr)
-    CONTINUE
-    BREAK
-    GOTO label
+    C-like statements
+    -----------------
+    { statement }
+    { statement; ... statement }
+    if (expr) statement
+    if (expr) statement ELSE statement
+    for (optionalexpr ; optionalexpr ; optionalexpr) statement
+    while (expr) statement
+    do statement while (expr)
+    continue
+    break
+    goto label
 	    These all work like in normal C.
 
-    RETURN optionalexpr
+	    See 'help expression' for details on expressions.
+	    See 'help builtin' for details on calc builtin functions.
+
+
+    return
+    ------
+    return optionalexpr
+    return ( optionalexpr )
 	    This returns a value from a function.  Functions always
 	    have a return value, even if this statement is not used.
 	    If no return statement is executed, or if no expression
 	    is specified in the return statement, then the return
 	    value from the function is the null type.
 
-    SWITCH (expr) { caseclauses }
+
+    switch
+    ------
+    switch (expr) { caseclauses }
 	    Switch statements work similarly to C, except for the
 	    following.	A switch can be done on any type of value,
 	    and the case statements can be of any type of values.
@@ -42,17 +52,12 @@ Statements
 	    is the exception, and only matches once all other cases
 	    have been tested.
 
-    { statements }
-	    This is a normal list of statements, each one ended by
-	    a semicolon.  Unlike the C language, no declarations are
-	    permitted within an inner-level compound statement.
-	    Declarations are only permitted at the beginning of a
-	    function definition, or at the beginning of an expression
-	    sequence.
 
-    MAT variable [dimension] [dimension] ...
-    MAT variable [dimension, dimension, ...]
-    MAT variable [] = { value, ... }
+    matrix
+    ------
+    mat variable [dimension] [dimension] ...
+    mat variable [dimension, dimension, ...]
+    mat variable [] = { value, ... }
 	    This creates a matrix variable with the specified dimensions.
 	    Matrices can have from 1 to 4 dimensions.  When specifying
 	    multiple dimensions, you can use either the standard C syntax,
@@ -119,8 +124,11 @@ Statements
 		    local mat temp[5];
 		    static mat strtable[] = {"hi", "there", "folks");
 
-    OBJ type { elementnames } optionalvariables
-    OBJ type variable
+
+    object
+    ------
+    obj type { elementnames } optionalvariables
+    obj type variable
 	    These create a new object type, or create one or more
 	    variables of the specified type.  For this calculator,
 	    an object is just a structure which is implicitly acted
@@ -183,33 +191,12 @@ Statements
 		    static obj point temp2 = {4, 3};
 		    global obj point p1, p2, p3;
 
-    EXIT string
-    QUIT string
-	    This command is used in two cases.  At the top command
-	    line level, quit will exit from the calculator.  This
-	    is the normal way to leave the calculator.  In any other
-	    use, quit will abort the current calculation as if an
-	    error had occurred.  If a string is given, then the string
-	    is printed as the reason for quitting, otherwise a general
-	    quit message is printed.  The routine name and line number
-	    which executed the quit is also printed in either case.
 
-	    Quit is useful when a routine detects invalid arguments,
-	    in order to stop a calculation cleanly.  For example,
-	    for a square root routine, an error can be given if the
-	    supplied parameter was a negative number, as in:
-
-		    define mysqrt(n)
-		    {
-			    if (n < 0)
-				    quit "Negative argument";
-			    ...
-		    }
-
-	    Exit is an alias for quit.
-
-
-    PRINT exprs
+    print expressions
+    -----------------
+    print expr
+    print expr, ... expr
+    print expr: ... expr
 	    For interactive expression evaluation, the values of all
 	    typed-in expressions are automatically displayed to the
 	    user.  However, within a function or loop, the printing of
@@ -247,25 +234,9 @@ Statements
 	    prints the name of the file that was opened.
 
 
-    SHOW item
-	    This command displays some information.
-
-		    builtin		built in functions
-		    global		global variables
-		    function	user-defined functions
-		    objfunc		possible object functions
-		    config		config parameters and values
-		    objtype		defined objects
-
-	    Only the first 4 characters of item are examined, so:
-
-		    show globals
-		    show global
-		    show glob
-
-	    do the same thing.
-
-
     Also see the help topic:
 
 	    command	    top level commands
+	    expression	    calc expression syntax
+	    builtin	    calc builtin functions
+	    usage	    how to invoke the calc command and calc -options

help/todo

@@ -5,28 +5,65 @@ Calc Todo Items:
 
     Code contributions are welcome.  Send patches to:
 
-	    calc-tester@postofc.corp.sgi.com
+	    calc-tester at postofc dot corp dot sgi dot com
+
+	    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
 
     See also the 'wishlist' help files for the calc enhancement wish list.
 
+    Calc bug reports, however, should send to:
+
+	    calc-tester at postofc dot corp dot sgi dot com
+
+	    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+
+    see the BUGS file or try the calc command:
+
+	    help bugs
+
 =-=
 
 Very High priority items:
 
-    * Write the help file for the inputlevel() builtin function.
-
     * Write the help file for the display() builtin function.
 
     * Write the help file for the stoponerror() builtin function.
 
     * Update the errmax about the meaning of errmax(-1).
 
-    * Document the new meanings for bit values and the sign of
-      of config("lib_debug") in the appropriate help file(s).
+    * Review and if needed, correct/update the help topics:
+
+	    topic		description
+	    -----		-----------
+	    intro		introduction to calc
+	    overview		overview of calc
+	    assoc		using associations
+	    command		top level commands
+	    config		configuration parameters
+	    define		how to define functions
+	    environment		how environment variables effect calc
+	    errorcodes		calc generated error codes
+	    expression		expression sequences
+	    file		using files
+	    history		command history
+	    interrupt		how interrupts are handled
+	    list		using lists
+	    mat			using matrices
+	    obj			user defined data types
+	    operator		math, relational, logic and variable access ...
+	    statement		flow control and declaration statements
+	    types		builtin data types
+	    unexpected		unexpected syntax/usage surprises for C ...
+	    variable		variables and variable declarations
+	    libcalc		using the arbitrary precision routines in ...
+	    bugs		known bugs and mis-features
+	    wishlist		wish list of future enhancements of calc
 
     * Fix any 'Known bugs' as noted in the BUGS file or as
       displayed by 'calc help bugs'.
 
+    * Copyleft calc and place it under a LGPL.
+
 =-=
 
 High priority items:
@@ -56,10 +93,11 @@ High priority items:
       then a $PAGER should be forked and execed after doing things such
       as closing open file descriptors that the $PAGER does not need.
 
-    * Inspect changes made since the last major calc release (the
-      initial x.y.z version ... prior to any t sub-version) to help
-      ensure that they have not introduced new or re-introduced old bugs
-      into calc.
+    * The arg passdown to the lower level Makfiles should be reviewed
+      to determine which items really need to be passed down.  The lower
+      level Makefiles should default to the shipped values.
+
+    * Consider using configure to build the calc Makefile.
 
 =-=
 
@@ -91,3 +129,6 @@ Medium priority items:
       other stuff) in a separate library.
 
     * Clean the source code and document it better.
+
+    * Add a builtin function to access the 64 bit FNV hash which
+      is currently being used internally in seed.c.

help/usage

@@ -2,8 +2,8 @@ Calc command line
 
     Calc has the following command line:
 
-	calc [-c] [-C] [-d] [-e] [-h] [-i] [-m mode]
-	     [-n] [-p] [-q] [-u] [-v] [calc_cmd ...]
+	calc [-c] [-C] [-d] [-D calc_debug[:lib_debug:[user_debug]]]
+	     [-e] [-h] [-i] [-m mode] [-n] [-p] [-q] [-u] [-v] [calc_cmd ...]
 
 	-c  Continue reading command lines even after an execution
 	    error has caused the abandonment of a line.
@@ -19,6 +19,10 @@ Calc command line
 	    will cause calc to try to process each line being read
 	    despite the errors that it encounters.
 
+	    By default, calc startup scripts ($CALCRC) are silently
+	    ignored if not found.  This flag will report missing
+	    startup scripts unless -d is also given.
+
 	-C  Permit the execution of custom builtin functions.  Without
 	    this flag, calling the custom() builtin function will
 	    simply generate an error.
@@ -48,6 +52,25 @@ Calc command line
 
 		It's nearly ten past six.
 
+	    This flag disables the reporting of missing calc
+	    startup scripts ($CALCRC).
+
+	-D calc_debug[:lib_debug:[user_debug]]
+
+	    Force the initial value of config("calc_debug"),
+	    config("lib_debug") and config("user_debug").
+
+	    The : separated strings are interpreted as signed 32 bit values.
+	    After an optional leading sign a leading zero indicates octal
+	    conversion, and a leading ``0x'' or ``0X'' hexadecimal
+	    conversion.	 Otherwise, decimal conversion is assumed.
+
+	    By default, calc_debug is 0, lib_debug is 3 and lib_debug is 0.
+
+	    For more information use the following calc command:
+
+		help config
+
 	-e  Ignore any environment variables on startup.  The
 	    getenv() builtin will still return values, however.
 

help/wishlist

@@ -4,11 +4,19 @@ Calc Enhancement Wish List:
     interesting calc scripts that you would like you see included in
     future distributions to:
 
-		calc-tester@postofc.corp.sgi.com
+	    calc-tester at postofc dot corp dot sgi dot com
+
+	    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
 
     The following items are in the calc wish list.  Programs like this
     can be extended and improved forever.
 
+    Calc bug repoers, however, should be sent to:
+
+	    calc-bugs at postofc dot corp dot sgi dot com
+
+	    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
+
     See the 'todo' help file for higher priority todo items.
 
 =-=
@@ -179,37 +187,3 @@ Calc Enhancement Wish List:
 
     *  Add read -once -try "filename" which would do nothing
        if "filename" was not a readable file.
-
-    * Blocks should have the following features:
-
-        + read/write to/from files (ala fread/fwrite)
-
-	+ misc memory functions (ala memcpy, memcmp, memset,
-	  memchr, etc.)
-
-	+ scatter and gather functions (to send every n-th octet
-	  to another block and to copy from n blocks, the 1st
-	  then 2nd then 3rd ... octets)
-
-    * Printing of blocks should be under the control of the
-      config() interface.  This should allow one to select
-      from any of the following formats:
-
-	+ as one long string
-
-	+ as a series of lines (< 80 chars wide)
-
-	+ in od command style (offset: value value value ...)
-
-	+ in hex dump style (offset: val val val val ...  3hf.Uas.c)
-
-    * In addition one should be able to control the following
-      aspects of printing blocks via the config() interface:
-
-	+ base (hex, octal, char, base 2)
-
-	+ amount of data (the first n octets or the entire block)
-
-	+ skipping printing of duplicate print lines (ala od)
-
-	+ have the ability to print the block as raw data

hist.c

@@ -5,6 +5,8 @@
  *
  * Adapted from code written by Stephen Rothwell.
  *
+ * GNU readline support added by Martin Buck <mbuck@debian.org>
+ *
  * Interactive readline module.	 This is called to read lines of input,
  * while using emacs-like editing commands within a command stack.
  * The key bindings for the editing commands are (slightly) configurable.
@@ -29,6 +31,11 @@
 #include "terminal.h"
 #include "have_string.h"
 
+#include "have_strdup.h"
+#if !defined(HAVE_STRDUP)
+# define strdup(x) calc_strdup((CONST char *)(x))
+#endif /* HAVE_STRDUP */
+
 
 #if defined(USE_TERMIOS)
 # include <termios.h>
@@ -48,6 +55,8 @@
 # include <string.h>
 #endif
 
+#if !defined(USE_READLINE)
+
 extern FILE *curstream(void);
 
 #define STDIN		0
@@ -242,7 +251,7 @@ int
 hist_getline(char *prompt, char *buf, int len)
 {
 	if (!inited)
-		(void) hist_init((char *) NULL);
+		(void) hist_init(calcbindings);
 
 	HS.prompt = prompt;
 	HS.bufsize = len - 2;
@@ -283,11 +292,16 @@ hist_init(char *filename)
 {
 	TTYSTRUCT	newtty;
 
-	if (inited)
+	if (inited) {
+		if (conf->calc_debug & CALCDBG_TTY)
+			printf("DEBUG: inited already set in hist_init\n");
 		return HIST_INITED;
+	}
 
 	inited = 1;
 	canedit = 0;
+	if (conf->calc_debug & CALCDBG_TTY)
+		printf("DEBUG: Set inited, cleared canedit in hist_init\n");
 
 	/*
 	 * open the bindings file
@@ -309,20 +323,31 @@ hist_init(char *filename)
 	closeinput();
 
 #ifdef	USE_SGTTY
-	if (ioctl(STDIN, TIOCGETP, &oldtty) < 0)
+	if (ioctl(STDIN, TIOCGETP, &oldtty) < 0) {
+		if (conf->calc_debug & CALCDBG_TTY)
+			printf("DEBUG: Cannot TIOCGETP stdin in hist_init\n");
 		return HIST_NOTTY;
+	}
 
 	newtty = oldtty;
 	newtty.sg_flags &= ~ECHO;
 	newtty.sg_flags |= CBREAK;
 
-	if (ioctl(STDIN, TIOCSETP, &newtty) < 0)
+	if (ioctl(STDIN, TIOCSETP, &newtty) < 0) {
+		if (conf->calc_debug & CALCDBG_TTY)
+			printf("DEBUG: Cannot TIOCSETP stdin in hist_init\n");
 		return HIST_NOTTY;
+	}
+	if (conf->calc_debug & CALCDBG_TTY)
+		printf("DEBUG: stty -ECHO +CBREAK in hist_init\n");
 #endif
 
 #ifdef	USE_TERMIO
-	if (ioctl(STDIN, TCGETA, &oldtty) < 0)
+	if (ioctl(STDIN, TCGETA, &oldtty) < 0) {
+		if (conf->calc_debug & CALCDBG_TTY)
+			printf("DEBUG: Cannot TCGETA stdin in hist_init\n");
 		return HIST_NOTTY;
+	}
 
 	newtty = oldtty;
 	newtty.c_lflag &= ~(ECHO | ECHOE | ECHOK);
@@ -331,13 +356,22 @@ hist_init(char *filename)
 	newtty.c_cc[VMIN] = 1;
 	newtty.c_cc[VTIME] = 0;
 
-	if (ioctl(STDIN, TCSETAW, &newtty) < 0)
+	if (ioctl(STDIN, TCSETAW, &newtty) < 0) {
+		if (conf->calc_debug & CALCDBG_TTY)
+			printf("DEBUG: Cannot TCSETAW stdin in hist_init\n");
 		return HIST_NOTTY;
+	}
+	if (conf->calc_debug & CALCDBG_TTY)
+		printf("DEBUG: stty -ECHO -ECHOE -ECHOK -ICANON +ISTRIP "
+		       "VMIN=1 VTIME=0 in hist_init\n");
 #endif
 
 #ifdef	USE_TERMIOS
-	if (tcgetattr(STDIN, &oldtty) < 0)
+	if (tcgetattr(STDIN, &oldtty) < 0) {
+		if (conf->calc_debug & CALCDBG_TTY)
+			printf("DEBUG: Cannot tcgetattr stdin in hist_init\n");
 		return HIST_NOTTY;
+	}
 
 	newtty = oldtty;
 	newtty.c_lflag &= ~(ECHO | ECHOE | ECHOK);
@@ -346,11 +380,19 @@ hist_init(char *filename)
 	newtty.c_cc[VMIN] = 1;
 	newtty.c_cc[VTIME] = 0;
 
-	if (tcsetattr(STDIN, TCSANOW, &newtty) < 0)
+	if (tcsetattr(STDIN, TCSANOW, &newtty) < 0) {
+		if (conf->calc_debug & CALCDBG_TTY)
+			printf("DEBUG: Cannot tcsetattr stdin in hist_init\n");
 		return HIST_NOTTY;
+	}
+	if (conf->calc_debug & CALCDBG_TTY)
+		printf("DEBUG: stty -ECHO -ECHOE -ECHOK -ICANON +ISTRIP "
+		       "VMIN=1 VTIME=0 in hist_init\n");
 #endif
 
 	canedit = 1;
+	if (conf->calc_debug & CALCDBG_TTY)
+		printf("DEBUG: Set canedit in hist_init\n");
 
 	return HIST_SUCCESS;
 }
@@ -363,20 +405,36 @@ void
 hist_term(void)
 {
 	if (!inited || !canedit) {
+		if (conf->calc_debug & CALCDBG_TTY) {
+			if (!inited)
+				printf("DEBUG: inited already cleared "
+				       "in hist_term\n");
+			if (!canedit)
+				printf("DEBUG: canedit already cleared "
+				       "in hist_term\n");
+		}
 		inited = 0;
+		if (conf->calc_debug & CALCDBG_TTY)
+			printf("DEBUG: Cleared inited in hist_term\n");
 		return;
 	}
 
 #ifdef	USE_SGTTY
 	(void) ioctl(STDIN, TIOCSETP, &oldtty);
+	if (conf->calc_debug & CALCDBG_TTY)
+		printf("DEBUG: TIOCSETP restored stdin in hist_term\n");
 #endif
 
 #ifdef	USE_TERMIO
 	(void) ioctl(STDIN, TCSETAW, &oldtty);
+	if (conf->calc_debug & CALCDBG_TTY)
+		printf("DEBUG: TCSETAW restored stdin in hist_term\n");
 #endif
 
 #ifdef	USE_TERMIOS
 	(void) tcsetattr(STDIN, TCSANOW, &oldtty);
+	if (conf->calc_debug & CALCDBG_TTY)
+		printf("DEBUG: TCSANOW restored stdin in hist_term\n");
 #endif
 }
 
@@ -455,11 +513,12 @@ do_bind_line(KEY_MAP *map, char *line)
 		if (*cp == '?') {
 			key = 0177;
 			cp++;
-		} else
+		} else {
 			key = CONTROL(*cp++);
 		}
-	else if (key == '\\')
+	} else if (key == '\\') {
 		key = *cp++;
+	}
 
 	while (isspace((int)*cp))
 		cp++;
@@ -523,8 +582,7 @@ do_default_line(KEY_MAP *map, char *line)
 	func_name = cp;
 	while ((*cp != '\0') && !isspace((int)*cp))
 		cp++;
-	if (*cp != '\0')
-	{
+	if (*cp != '\0') {
 		*cp++ = '\0';
 		while (isspace((int)*cp))
 			cp++;
@@ -533,15 +591,13 @@ do_default_line(KEY_MAP *map, char *line)
 	if (func == NULL)
 		return;
 
-	if (*cp == '\0')
+	if (*cp == '\0') {
 		next = map;
-	else
-	{
+	} else {
 		next_name = cp;
 		while ((*cp != '\0') && !isspace((int)*cp))
 			cp++;
-		if (*cp != '\0')
-		{
+		if (*cp != '\0') {
 			*cp++ = '\0';
 			while (isspace((int)*cp))
 				cp++;
@@ -1347,9 +1403,9 @@ beep(void)
 static void
 echo_char(int ch)
 {
-	if (isprint(ch))
+	if (isprint(ch)) {
 		putchar(ch);
-	else {
+	} else {
 		putchar('^');
 		putchar((ch + '@') & 0x7f);
 	}
@@ -1383,8 +1439,112 @@ quit_calc(void)
 	exit(0);
 }
 
+#else /* USE_READLINE */
 
-#ifdef	HIST_TEST
+
+#define HISTORY_LEN (1024)	/* number of entries to save */
+
+
+#include <readline/readline.h>
+#include <readline/history.h>
+
+
+/*
+ * The readline/history libs do most of the dirty work for us, so we can
+ * replace hist_init() and hist_term() with dummies when using readline.
+ * For hist_getline() we have to add a newline that readline removed but
+ * calc expects. For hist_saveline(), we have to undo this.  hist_getline()
+ * also has to cope with the different memory management schemes of calc and
+ * readline.
+ */
+
+
+/* name of history file */
+char *my_calc_history = NULL;
+
+int
+hist_getline(char *prompt, char *buf, int len)
+{
+	char *line;
+
+	buf[0] = '\0';
+	line = readline(prompt);
+	if (!line)
+		return 0;
+	strncpy(buf, line, len - 1);
+	buf[len - 2] = '\0';
+	len = strlen(buf);
+	buf[len] = '\n';
+	buf[len + 1] = '\0';
+	free(line);
+	return len + 1;
+}
+
+
+void
+hist_term(void)
+{
+}
+
+
+static void
+my_stifle_history (void)
+{
+	/* only save last number of entries */
+	stifle_history(HISTORY_LEN);
+
+	if (my_calc_history)
+		write_history(my_calc_history);
+}
+
+
+int
+hist_init(char *filename)
+{
+	/* used when parsing conditionals in ~/.inputrc */
+	rl_readline_name = "calc";
+
+	/* initialize interactive variables */
+	using_history();
+
+	/* name of history file */
+	my_calc_history = tilde_expand("~/.calc_history");
+
+	/* read previous history */
+	read_history(my_calc_history);
+
+	atexit(my_stifle_history);
+
+	return HIST_SUCCESS;
+}
+
+void
+hist_saveline(char *line, int len)
+{
+	static char *prev = NULL;
+
+	if (len <= 1)
+		return;
+
+	/* ignore if identical with previous line */
+	if (prev != NULL && strcmp(prev, line) == 0)
+		return;
+
+	free (prev);
+
+	/* fail silently */
+	prev = strdup(line);
+
+	line[len - 1] = '\0';
+	add_history(line);
+	line[len - 1] = '\n';
+}
+
+
+#endif /* USE_READLINE */
+
+
+#if defined(HIST_TEST)
 
 /*
  * Main routine to test history.
@@ -1425,6 +1585,5 @@ main(int argc, char **argv)
 	hist_term();
 	exit(0);
 }
-#endif
 
-/* END CODE */
+#endif /* HIST_TEST */

input.c

@@ -12,6 +12,12 @@
 #include <pwd.h>
 #include <sys/types.h>
 #include <sys/stat.h>
+
+#include "have_unistd.h"
+#if defined(HAVE_UNISTD_H)
+#include <unistd.h>
+#endif
+
 #include "calc.h"
 #include "conf.h"
 #include "hist.h"
@@ -518,9 +524,9 @@ nextchar(void)
 		if (cip->i_num) {
 			ch = chartoint(*cip->i_cp++);
 			cip->i_num--;
-		}
-		else
+		} else {
 			ch = EOF;
+		}
 	} else if (cip->i_fp) {		/* from file */
 		ch = fgetc(cip->i_fp);
 	} else if (!stdin_tty) {		/* from file */
@@ -633,6 +639,9 @@ ttychar(void)
 		if (*cmd == '\0' || *cmd == '\n')
 			cmd = shell;
 		if (allow_exec) {
+			if (conf->calc_debug & CALCDBG_SYSTEM) {
+				printf("%s\n", cmd);
+			}
 			system(cmd);
 		} else {
 			fprintf(stderr, "execution disallowed by -m flag\n");
@@ -719,34 +728,35 @@ runrcfiles(void)
 {
 	char path[MAX_CALCRC+1+1];	/* name being searched for */
 	char *cp;
-	char *newcp;
 	char *p;
-	int i;
 
 	/* execute each file in the list */
-	for (cp=calcrc, newcp=(char *)strchr(calcrc, LISTCHAR);
-	     cp != NULL && *cp;
-	     cp = newcp,
-		 newcp=(newcp) ? (char *)strchr(newcp+1, LISTCHAR) : NULL) {
+	while (calcrc != NULL && *calcrc) {
+		cp = calcrc;
+		calcrc = (char *) strchr(calcrc + 1, LISTCHAR);
 
 		/* load file name into the path */
-		if (newcp == NULL) {
+		if (calcrc == NULL) {
 			strcpy(path, cp);
 		} else {
-			strncpy(path, cp, newcp-cp);
-			path[newcp-cp] = '\0';
+			strncpy(path, cp, calcrc - cp);
+			path[calcrc - cp] = '\0';
 		}
 
 		/* find the start of the path */
-		p = (path[0] == ':') ? path+1 : path;
+		p = (path[0] == ':') ? path + 1 : path;
 		if (p[0] == '\0') {
 			continue;
 		}
 
 		/* process the current file in the list */
-		i = openfile(p);
-		if (i < 0)
+		if (openfile(p) < 0) {
+			/* Unable to open rcfile */
+			if (c_flag && !d_flag)
+				 fprintf(stderr,
+					"Unable to open rcfile \"%s\"\n", p);
 			continue;
+		}
 		getcommands(FALSE);
 		closeinput();
 	}
@@ -898,6 +908,3 @@ addreadset(char *name, char *path, struct stat *sbuf)
 	/* return index of the newly added entry */
 	return ret;
 }
-
-
-/* END CODE */

lib/Makefile

@@ -44,7 +44,7 @@ CALC_FILES= README bigprime.cal deg.cal ellip.cal lucas.cal lucas_chk.cal \
 	test2700.cal test3100.cal test3300.cal test3400.cal prompt.cal \
 	test3500.cal seedrandom.cal test4000.cal test4100.cal test4600.cal \
 	beer.cal hello.cal test5100.cal test5200.cal randombitrun.cal \
-	randomrun.cal xx_print.cal natnumset.cal qtime.cal
+	randomrun.cal xx_print.cal natnumset.cal qtime.cal test8400.cal
 
 # These files are found (but not built) in the distribution
 #
@@ -73,15 +73,11 @@ all: ${CALC_FILES} ${MAKE_FILE} .all
 
 distlist: ${DISTLIST}
 	${Q}for i in ${DISTLIST}; do \
-		echo calc/lib/$$i; \
+		echo lib/$$i; \
 	done
 
-# The bsdi distribution has generated files as well as distributed files.
-#
-bsdilist: ${DISTLIST}
-	${Q}for i in ${DISTLIST}; do \
-		echo calc/lib/$$i; \
-	done
+distdir:
+	${Q}echo lib
 
 clean:
 

lib/README

@@ -17,7 +17,7 @@ For example:
 
 will cause calc to load and execute the 'lucas.cal' library.
 Executing the library will cause several functions to be defined.
-Executing the lucas function
+Executing the lucas function:
 
     > lucas(149,60)
 	    1
@@ -33,7 +33,9 @@ the calc language, and/or because the authors thought them to be useful!
 
 If you write something that you think is useful, please send it to:
 
-    calc-tester@postofc.corp.sgi.com
+    calc-tester at postofc dot corp dot sgi dot com
+
+    [[ Replace 'at' with @, 'dot' is with . and remove the spaces ]]
 
 By convention, a lib file only defines and/or initializes functions,
 objects and variables.	(The regress.cal and testxxx.cal regression test
@@ -50,37 +52,41 @@ version of read:
 This will cause the needed library files to be read once.  If these
 files have already been read, the read -once will act as a noop.
 
-By convention, the config parameter "lib_debug"  is used to control
-the verbosity of debug information printed by lib files.  By default,
-the "lib_debug" has a value of 0.
+The "lib_debug" parameter is intended for controlling the possible
+display of special information relating to functions, objects, and
+other structures created by instructions in calc scripts.
+Zero value of config("lib_debug") means that no such information
+is displayed.  For other values, the non-zero bits which currently
+have meanings are as follows:
 
-The "lib_debug" config parameter takes the place of the lib_debug
-global variable.  By convention, "lib_debug" has the following meanings:
+    n	    Meaning of bit n of config("lib_debug")
 
-	<-1	no debug messages are printed though some internal
-		    debug actions and information may be collected
+    0	When a function is defined, redefined or undefined at
+	interactive level, a message saying what has been done
+	is displayed.
 
-	-1	no debug messages are printed, no debug actions will be taken
+    1	When a function is defined, redefined or undefined during
+	the reading of a file, a message saying what has been done
+	is displayed.
 
-	0	only usage message regarding each important object are
-		    printed at the time of the read (default)
+The value for config("lib_debug") in both oldstd and newstd is 3,
+but if calc is invoked with the -d flag, its initial value is zero.
+Thus, if calc is started without the -d flag, until config("lib_debug")
+is changed, a message will be output when a function is defined
+either interactively or during the reading of a file.
 
-	>0	messages regarding each important object are
-		    printed at the time of the read in addition
-		    to other debug messages
-
-When config("lib_debug") >= 0, function names and their arg are
-printed as they are defined.  Sometimes this printing is not enough
-information.  For example:
+Sometimes the information printed is not enough.  In addition to the
+standard information, one might want to print:
 
 	* useful obj definitions
 	* functions with optional args
 	* functions with optional args where the param() interface is used
 
 For these cases we suggest that you place at the bottom of your code
-something like:
+something that prints extra information if config("lib_debug") has
+either of the bottom 2 bits set:
 
-	if (config("lib_debug") >= 0) {
+	if (config("lib_debug") & 3) {
 		print "obj xyz defined";
 		print "funcA([val1 [, val2]]) defined";
 		print "funcB(size, mass, ...) defined";
@@ -269,10 +275,18 @@ pell.cal
 pi.cal
 
     qpi(epsilon)
+    piforever()
 
-    Calculate pi within the specified epsilon using the quartic convergence
-    iteration.
+    The qpi() calculate pi within the specified epsilon using the quartic
+    convergence iteration.
 
+    The piforever() prints digits of pi, nicely formatted, for as long
+    as your free memory space and system up time allows.
+
+    The piforever() funcion (written by Klaus Alexander Seistrup
+    <klaus@seistrup.dk>) was inspired by an algorithm conceived by
+    Lambert Meertens.  See also the ABC Programmer's Handbook, by Geurts,
+    Meertens & Pemberton, published by Prentice-Hall (UK) Ltd., 1990.
 
 pix.cal
 

lib/altbind

@@ -1,4 +1,8 @@
 # Alternate key bindings for calc line editing functions
+#
+# NOTE: This facility is ignored if calc was compiled with GNU-readline.
+#	In that case, the standard readline mechanisms (see readline(3))
+#	are used in place of those found below.
 
 map	base-map
 default insert-char

lib/bindings

@@ -1,4 +1,8 @@
 # Default key bindings for calc line editing functions
+#
+# NOTE: This facility is ignored if calc was compiled with GNU-readline.
+#	In that case, the standard readline mechanisms (see readline(3))
+#	are used in place of those found below.
 
 map	base-map
 default insert-char

lib/chrem.cal

@@ -86,7 +86,7 @@
  *	i.e., any value that is 301 mod 420.
  *
  * Written by: Ernest W Bowen <ernie@neumann.une.edu.au>
- * Interface by: Landon Curt Noll http://reality.sgi.com/chongo
+ * Interface by: Landon Curt Noll http://reality.sgi.com/chongo/
  */
 
 static defaultmlist = list(2,3,5,7,11,13,17,19); /* The first eight primes */
@@ -174,7 +174,7 @@ define chrem()
     }
 }
 
-if (config("lib_debug") >= 0) {
+if (config("lib_debug") & 3) {
     print "chrem(r1,m1 [,r2,m2 ...]) defined";
     print "chrem(rlist [,mlist]) defined";
 }

lib/deg.cal

@@ -111,6 +111,6 @@ define fixdms(a)
 	a.deg %= 360;
 }
 
-if (config("lib_debug") >= 0) {
+if (config("lib_debug") & 3) {
     print "obj dms {deg, min, sec} defined";
 }

lib/lucas.cal

@@ -20,7 +20,7 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  *	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  *	chongo <was here> /\../\
  */
@@ -1027,7 +1027,7 @@ gen_v1(h, n)
 define
 ldebug(funct, str)
 {
-	if (config("lib_debug") > 0) {
+	if (config("lib_debug") & 3) {
 		print "DEBUG:", funct:":", str;
 	}
 	return;

lib/lucas_chk.cal

@@ -20,7 +20,7 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  *	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  *	chongo <was here> /\../\
  */
@@ -331,7 +331,7 @@ lucas_chk(high_n, quiet)
 
 		/* skip primes where h>=2^n */
 		if (highbit(h_p[i]) >= n_p[i]) {
-			if (config("lib_debug") > 0) {
+			if (config("lib_debug") & 3) {
 				print "h>=2^n skip:", h_p[i]:"*2^":n_p[i]:"-1";
 			}
 			continue;

lib/lucas_tbl.cal

@@ -20,7 +20,7 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  *	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  *	chongo <was here> /\../\
  */
@@ -152,7 +152,7 @@ d_val[97]=1045;  a_val[97]=33;  b_val[97]=1;  r_val[97]=44;
 d_val[99]=9797;	 a_val[99]=97;	b_val[99]=1;  r_val[99]=388;
 d_val[100]=  51; a_val[100]= 7; b_val[100]=1; r_val[100]=2;
 
-if (config("lib_debug") >= 0) {
+if (config("lib_debug") & 3) {
     print "d_val[100] defined";
     print "a_val[100] defined";
     print "b_val[100] defined";

lib/mfactor.cal

@@ -20,7 +20,7 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  *	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  *	chongo <was here> /\../\
  */
@@ -312,6 +312,6 @@ define mfactor(n, start_k, rept_loop, p_elim)
 	return q;
 }
 
-if (config("lib_debug") >= 0) {
+if (config("lib_debug") & 3) {
 	print "mfactor(n [, start_k=1 [, rept_loop=10000 [, p_elim=17]]])"
 }

lib/mod.cal

@@ -189,7 +189,7 @@ define mod_pow(a, b)
 }
 
 
-if (config("lib_debug") >= 0) {
+if (config("lib_debug") & 3) {
     print "obj mod {a} defined";
     print "mod_value defined";
     print "set mod_value as needed";

lib/pi.cal

@@ -47,3 +47,75 @@ define qpi(epsilon)
 	}
 	return (bround(1/an, bits));
 }
+
+
+/*
+ * Print digits of PI forever, neatly formatted, using calc.
+ *
+ * Written by Klaus Alexander Seistrup <klaus@seistrup.dk>
+ * on a dull Friday evening in November 1999.
+ *
+ * Inspired by an algorithm conceived by Lambert Meertens.
+ *
+ * See also the ABC Programmer's Handbook, by Geurts, Meertens & Pemberton,
+ * published by Prentice-Hall (UK) Ltd., 1990.
+ *
+ */
+
+define piforever()
+{
+	local k = 2;
+	local a = 4;
+	local b = 1;
+	local a1 = 12;
+	local b1 = 4;
+	local a2, b2, p, q, d, d1;
+	local stdout = files(1);
+	local first = 1, row = -1, col = 0;
+
+	while (1) {
+		/*
+		* Next approximation
+		*/
+		p = k * k;
+		q = k + k++;
+
+		a2 = a;
+		b2 = b;
+
+		a = a1;
+		a1 = p * a2 + q * a1;
+		b = b1;
+		b1 = p * b2 + q * b1;
+
+		/*
+		* Print common digits
+		*/
+		d = a // b;
+		d1 = a1 // b1;
+
+		while (d == d1) {
+			if (first) {
+				printf("%d.", d);
+				first = 0;
+			} else {
+				if (!(col % 50)) {
+					printf("\n");
+					col = 0;
+					if (!(++row % 20)) {
+						printf("\n");
+						row = 0;
+					}
+				}
+				printf("%d", d);
+				if (!(++col % 10))
+					printf(" ");
+			}
+			a = 10 * (a % b);
+			a1 = 10 * (a1 % b1);
+			d = a // b;
+			d1 = a1 // b1;
+		}
+		fflush(stdout);
+	}
+}

lib/poly.cal

@@ -687,6 +687,6 @@ a=pol(1,4,4,2,3,1);
 b=pol(5,16,8,1);
 c=pol(1+2i,3+4i,5+6i);
 
-if (config("lib_debug") >= 0) {
+if (config("lib_debug") & 3) {
 	print "obj poly {p} defined";
 }

lib/qtime.cal

@@ -7,7 +7,7 @@
  *	utc_hr_offset	Offset from UTC in hours.
  *
  * Written by: Klaus Alexander Seistrup <kseis@magnetic-ink.dk>
- * With minor mods by: Landon Curt Noll <http://reality.sgi.com/chongo>
+ * With minor mods by: Landon Curt Noll <http://reality.sgi.com/chongo/>
  *
  * See:
  *	http://www.magnetic-ink.dk/download/qtime.html

lib/quat.cal

@@ -195,6 +195,6 @@ define quat_shift(a, b)
 	return x.s;
 }
 
-if (config("lib_debug") >= 0) {
+if (config("lib_debug") & 3) {
     print "obj quat {s, v} defined";
 }

lib/randmprime.cal

@@ -22,7 +22,7 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  *	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  *	chongo <was here> /\../\
  */

lib/randrun.cal

@@ -122,6 +122,6 @@ define randrun(run_cnt)
     printf("max length=%d\n", max_run);
 }
 
-if (config("lib_debug") >= 0) {
+if (config("lib_debug") & 3) {
     print "randrun([run_length]) defined";
 }

lib/regress.cal

@@ -20,17 +20,17 @@ print '002: Within each section, output should be numbered sequentially';
 global prob;				/* libregress.cal problem counter */
 prob = 0;				/* clear problem counter */
 
-global junk;				/* throw away value */
-junk = errcount(0);			/* clear error count */
-junk = errmax(-1);			/* prevent errcount from abouting */
+errcount(0),;				/* clear error count */
+errmax(-1),;				/* prevent errcount from abouting */
 
 global ecnt;				/* expected value of errcount() */
 ecnt = 0;				/* clear expected errcount() value */
 
 initcfg = config("all", "oldstd");	/* set config to startup default */
-initcfg = config("lib_debug", -4);	/* disable lib startup messages */
-initcfg = config("calc_debug", 1);	/* enable more internal debugging */
-initcfg = config("all");		/* save state for later use */
+config("lib_debug", 0),;		/* disable lib startup messages */
+config("calc_debug", 0),;		/* disable internal debugging */
+config("verbose_quit", 0),;		/* disable quit messages */
+startcfg = config("all");		/* save state for later use */
 
 print '003: parsed global definitions';
 
@@ -291,7 +291,7 @@ define test_arithmetic()
 	vrfy(8/4==2,		'404: 8 / 4 == 2');
 	vrfy(2^3==8,		'405: 2 ^ 3 == 8');
 	vrfy(9-4-2==3,		'406: 9-4-2 == 3');
-	vrfy(9-4+2==7,		'407: 9-4+2 == 6');
+	vrfy(9-4+2==7,		'407: 9-4+2 == 7');
 	vrfy(-5+2==-3,		'408: -5+2 == -3');
 	vrfy(2*3+1==7,		'409: 2*3+1 == 7');
 	vrfy(1+2*3==7,		'410: 1+2*3 == 7');
@@ -358,7 +358,7 @@ define test_config()
 	print				'502: callcfg = config("all","oldstd")';
 	oldcfg = config("all", "newstd");
 	print				'503: oldcfg = config("all","newstd")';
-	vrfy(callcfg == initcfg,	'504: callcfg == initcfg');
+	vrfy(callcfg == startcfg,	'504: callcfg == startcfg');
 	newcfg = config("all");
 	print				'505: newcfg = config("all")';
 	vrfy(config("all") == newcfg,	'506: config("all") == newcfg');
@@ -456,7 +456,7 @@ define test_config()
 	vrfy(config("all",callcfg) == oldcfg,
 					'550: config("all",callcfg) == oldcfg');
 	vrfy(config("all") == callcfg,	'551: config("all") == callcfg');
-	vrfy(config("all") == initcfg,	'552: config("all") == initcfg');
+	vrfy(config("all") == startcfg, '552: config("all") == startcfg');
 
 	print '553: Ending test_config';
 }
@@ -964,7 +964,7 @@ define test_functions()
 	vrfy(strpos(a, a) == 1,		'948: strpos(a, a) == 1');
 	vrfy(system("") == 0,		'949: system("") == 0');
 	vrfy(system("true") == 0,	'950: system("true") == 0');
-	vrfy(isatty(files(0)) == 1,	'951: isatty(files(0)) == 1');
+	print		'951: test disabled due to stdin dependency';
 	print				'952: test removed';
 	print				'953: test removed';
 	vrfy(isstr(cmdbuf()) == 1,	'954: isstr(cmdbuf()) == 1');
@@ -1694,6 +1694,7 @@ define test_obj()
 {
 	static obj surd a;
 	static obj surd b;
+	local PP;
 
 	print '1800: Beginning object test';
 
@@ -1731,7 +1732,10 @@ define test_obj()
 	vrfy(a <= a,			'1828: a < a');
 	vrfy(isobj(a) == 1,		'1829: isobj(a) == 1');
 
-	print '1830: Ending object test';
+	obj pt {x,y}, PP = obj pair {A,B} = {obj pt, obj pt};
+	print '1830: obj pt {x,y}, PP = obj pair {A,B} = {obj pt, obj pt}';
+
+	print '1831: Ending object test';
 }
 print '028: parsed test_obj()';
 
@@ -2867,7 +2871,7 @@ print '053: parsed test_frem()';
  */
 define test_error()
 {
-	local strx, e99, list1, e999;
+	local strx, e99, list1, e9999;
 	local a, b, c, n, x;		/* used by newerror() */
 
 	print '3600: Beginning test_error';
@@ -3040,11 +3044,12 @@ define test_error()
 					'3710: newerror() == newerror("???")');
 	vrfy(newerror("") == newerror(),
 					'3711: newerror("") == newerror()');
-	e999 = error(999);
-	print				'3712: e999 = error(999)';
-	vrfy(errno() == 999,		'3713: errno() == 999');
-	vrfy(error() == e999,		'3714: error() == e999');
-	vrfy(strerror() == "Error 999",	'3715: strerror() == "Error 999"');
+	e9999 = error(9999);
+	print				'3712: e9999 = error(9999)';
+	vrfy(errno() == 9999,		'3713: errno() == 9999');
+	vrfy(error() == e9999,		'3714: error() == e9999');
+	vrfy(strerror() == "Unknown error 9999",
+				'3715: strerror() == "Unknown error 9999"');
 	x = newerror("Alpha");
 	print				'3716: x = newerror("Alpha")';
 	n = iserror(x);
@@ -3052,10 +3057,11 @@ define test_error()
 	vrfy(errno() == n,		'3718: errno() == n');
 	vrfy(error() == x,		'3719: error() == x');
 	vrfy(strerror() == "Alpha",	'3720: strerror() == "Alpha"');
-	vrfy(errno(999) == n,		'3721: errno() == n');
-	vrfy(errno() == 999,		'3722: errno() == 999');
-	vrfy(error() == e999,		'3723: error() == e999');
-	vrfy(strerror() == "Error 999",	'3724: strerror() == "Error 999"');
+	vrfy(errno(9999) == n,		'3721: errno() == n');
+	vrfy(errno() == 9999,		'3722: errno() == 9999');
+	vrfy(error() == e9999,		'3723: error() == e9999');
+	vrfy(strerror() == "Unknown error 9999",
+				'3724: strerror() == "Unknown error 9999"');
 	a = 1/0;
 	print				'3725: a = 1/0';
 	vrfy(strerror() == "Division by zero",
@@ -3302,7 +3308,7 @@ define test_fileops()
 
 	print '4261: Ending test_fileops';
 }
-print '071: parsed test_redc()';
+print '071: parsed test_fileops()';
 
 
 /*
@@ -4687,8 +4693,8 @@ define test_commaeq()
 	/*
 	 * matrix assignment
 	 */
-	mat A[3] = {1,2,3}, B[2] = {1,2};
-	print		'5625: mat A[3] = {1,2,3}, B[2] = {1,2}';
+	mat A[3] = {1,2,3}, mat B[2] = {1,2};
+	print		'5625: mat A[3] = {1,2,3}, mat B[2] = {1,2}';
 	vrfy(A[0] == 1,			  '5626: A[0] == 1');
 	vrfy(B[1] == 2,			  '5627: B[1] == 2');
 
@@ -4916,8 +4922,8 @@ define test_assign(base, work)
 	print				  base+3: ': X5800 = base+3';
 	Y5800 = base+4;
 	print				  base+4: ': Y5800 = base+4';
-	obj xy5800 A={1,2}, B={3,4};
-	print base+5: ': obj xy5800 A={1,2}, B={3,4}';
+	obj xy5800 A={1,2}, obj xy5800 B={3,4};
+	print base+5: ': obj xy5800 A={1,2}, obj xy5000 B={3,4}';
 
 	/*
 	 * test assignment
@@ -5106,7 +5112,7 @@ define test_is()
 	vrfy(isatty(square) == 0,	  '5981: isatty(square) == 0');
 	vrfy(isatty(string) == 0,	  '5982: isatty(string) == 0');
 	vrfy(isatty(com) == 0,		  '5983: isatty(com) == 0');
-	vrfy(isatty(files(0)) == 1,	  '5984: isatty(files(0)) == 1');
+	print		'5984: test disabled due to stdin dependency';
 	/* if we pipe to awk (for make chk), stdout and stderr are not ttys */
 	print				  '5985: test unused';
 	print				  '5986: test unused';
@@ -6861,7 +6867,7 @@ print '181: parsed test_ptr()';
  */
 define test_newstring()
 {
-	local A, B, C, D, S, p;
+	local A, B, C, D, S, p, q;
 
 	print '7700: Beginning test_newstring';
 
@@ -6953,7 +6959,14 @@ define test_newstring()
 	print				'7762: setbit(A, 16, 0);';
 	vrfy(A == "A\255fdef",		'7763: A == "A\255fdef"');
 
-	print '7764: Ending test_newstring';
+	q = "curds" " and " "whey";
+	print				'7764: q = "curds" " and " "whey"';
+	vrfy(q == "curds and whey",	'7765: q == "curds and whey"');
+	q = "chongo" ' was ' "here";
+	print				'7766: q = "chongo" \' was \' "here"';
+	vrfy(q == "chongo was here",	'7767: q == "chongo was here"');
+
+	print '7768: Ending test_newstring';
 }
 print '182: parsed test_newstring()';
 
@@ -7113,8 +7126,12 @@ print '188: parsed test_natnumset()';
 /*
  * test_somenew - test some new features
  */
+define func8200(x,y) {if (x>0) return calclevel()+func8200(x-1,y)-y; return 0;}
+print '189: define func8200(x,y)';
 define test_somenew()
 {
+	local a, s, y;
+
 	print	'8200: Starting test_somenew';
 
 	vrfy(char(-1) == char(255),	'8201: char(-1) == char(255)');
@@ -7139,9 +7156,42 @@ define test_somenew()
 	vrfy(1/(1/0) == 0,		'8215: 1/(1/0) == 0');
 	vrfy(inverse(1/0) == 0,		'8216: inverse(1/0) == 0');
 
-	print '8217: Ending test_somenew';
+	a = isqrt(2e1000); s = "xyz";
+	print				'8217: a = isqrt(2e1000); s = "xyz";';
+	vrfy(hash(a,s) == 2708885378,	'8218: hash(a,s) == 2708885378');
+	vrfy(hash("curds n whey") == 2376141927,
+			'8219: hash("curds n whey") == 2376141927');
+
+	y = calclevel();
+	print				'8220: y = calclevel()';
+	vrfy(func8200(0,y) == 0,	'8221: func8200(0,y) == 0');
+	vrfy(func8200(1,y) == 1,	'8222: func8200(1,y) == 1');
+	vrfy(func8200(10,y) == 55,	'8223: func8200(10,y) == 55');
+	vrfy(func8200(100,y) == 5050,	'8224: func8200(100,y) == 5050');
+
+	vrfy(inputlevel() == 1,		'8225: inputlevel() == 1');
+
+	print '8226: Ending test_somenew';
 }
-print '189: parsed test_somenew()';
+print '190: parsed test_somenew()';
+
+
+/*
+ * test_quit - test the QUIT functionality
+ */
+define test_quit()
+{
+	local x8400 = 23209;	/* watch for lost memory */
+	static s8400 = 21701;	/* watch for lost memory */
+
+	print '8400: Starting test_quit';
+
+	quit;
+	prob('quit did not end the test_quit() function');
+
+	/* 8400 serise continued after return, do not print end here */
+}
+print '191: parsed test_quit()';
 
 
 /*
@@ -7195,16 +7245,27 @@ print '1700: Beginning read test';
 value = 0;
 vrfy(value == 0,		  '1701: value == 0');
 read "test1700";
-vrfy(value == 1,		  '1702: value == 1');
-read -once "test1700";
+print				  '1702: read "test1700";';
 vrfy(value == 1,		  '1703: value == 1');
+read -once "test1700";
+print				  '1704: read -once "test1700";';
+vrfy(value == 1,		  '1705: value == 1');
 read "test1700.cal";
-vrfy(value == 2,		  '1704: value == 2');
+print				  '1706: read "test1700.cal";';
+vrfy(value == 2,		  '1707: value == 2');
 read -once "test1700.cal";
-vrfy(value == 2,		  '1705: value == 2');
+print				  '1708: read -once "test1700.cal";';
+vrfy(value == 2,		  '1709: value == 2');
 read "test1700.cal";
-vrfy(value == 3,		  '1706: value == 3');
-print '1707: Ending read test';
+print				  '1710: read "test1700.cal";';
+vrfy(value == 3,		  '1711: value == 3');
+{++value;} read "test1700.cal";
+print				  '1712: {++value;} read "test1700.cal";';
+vrfy(value == 5,		  '1713: value == 5');
+{++value;} read -once "test1700.cal";
+print				  '1714: {++value;} read -once "test1700.cal";';
+vrfy(value == 6,		  '1715: value == 6');
+print '1716: Ending read test';
 
 print;
 return test_obj();
@@ -7279,6 +7340,9 @@ print;
 return test_size();
 print;
 
+/*
+ * 5800 assignment tests
+ */
 return test_assign(5800, 1);
 define xy5800_assign(a,b) { };
 print '5812: define xy5800_assign(a,b) { }';
@@ -7323,7 +7387,10 @@ X5800 = obj xy5800 = {1,2};
 print				  '5864: X5800 = obj xy5800 = {1,2}';
 vrfy(X5800 == (obj xy5800 = {1,2}),
 				  '5865: X5800 == (obj xy5800 = {1,2})');
-print '5899: End of 5800 sequence';
+define f5800(a8500 = mat[2] = {3,4}) = 5 * a8500;
+print		'5866: define f5800(a8500 = mat[2] = {3,4}) = 5 * a8500;'
+vrfy(f5800() == (mat[] = {15,20}),'5867: f5800() == (mat[] = {15,20})');
+print '5868: End of 5800 sequence';
 
 print;
 return test_is();
@@ -7407,7 +7474,21 @@ print	'8304: define h8300(x)=x^3;define i8300(x)=x-1;define j8300(x)=x+1;';
 vrfy(h8300(10) == 1000,		'8305: h8300(10) == 1000');
 vrfy(i8300(10) == 9,		'8306: i8300(10) == 9');
 vrfy(j8300(10) == 11,		'8307: j8300(10) == 11');
-print	'8308: Ending define tests';
+{static k8300 = 5} define l8300(x) = k8300 + x;
+print	'8308: {static k8300 = 5} define l8300(x) = k8300 + x;';
+vrfy(l8300(10) == 15,		'8309: l8300(10) == 15');
+print	'8310: Ending define tests';
+
+
+/*
+ * quit tests
+ */
+print;
+return test_quit();
+read -once test8400;
+print	'8404: read -once test8400';
+vrfy(test8400() == 64434,	'8405: test8400() == 64434');
+print	'8406: Ending test_quit';
 
 
 /*
@@ -7423,7 +7504,7 @@ print	'8308: Ending define tests';
  *	lucas_tbl.cal	- duplicatres code already read by another file
  *	regress.cal	- this file
  *	surd.cal	- already read by this file
- *	testXXXX.cal	- already read by this file
+ *	test9999.cal	- files of this form are already read by this file
  *	xx_print.cal	- prints a bunch of things when loaded
  *
  * We want to do this 2nd to last; ahead of any final cleanup and behind

lib/seedrandom.cal

@@ -20,7 +20,7 @@
  * PERFORMANCE OF THIS SOFTWARE.
  *
  *	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  *	chongo <was here> /\../\
  */
@@ -113,7 +113,7 @@ define seedrandom(seed1, seed2, size, trials)
 			p = 2*fp+1;
 		} while (ptest(p,1,0) == 0);
 	} while(ptest(p, trials) == 0 || ptest(fp, trials) == 0);
-	if (config("lib_debug") > 0) {
+	if (config("lib_debug") & 3) {
 		print "/* 1st Blum prime */ p=", p;
 	}
 
@@ -127,7 +127,7 @@ define seedrandom(seed1, seed2, size, trials)
 			q = 2*fq+1;
 		} while (ptest(q,1,0) == 0);
 	} while(ptest(q, trials) == 0 || ptest(fq, trials) == 0);
-	if (config("lib_debug") > 0) {
+	if (config("lib_debug") & 3) {
 		print "/* 2nd Blum prime */ q=", q;
 	}
 
@@ -137,7 +137,7 @@ define seedrandom(seed1, seed2, size, trials)
 	n = p*q;				/* the Blum modulus */
 	binsize = highbit(n)+1;			/* smallest power of 2 > p*q */
 	r = pmod(rand(1<<ceil(binsize*4/5), 1<<(binsize-2)), 2, n);
-	if (config("lib_debug") >= 0) {
+	if (config("lib_debug") & 3) {
 		print "/* seed quadratic residue */ r=", r;
 		print "/* newn", binsize, "bit quadratic residue*/ newn=", n;
 	}
@@ -154,6 +154,6 @@ define seedrandom(seed1, seed2, size, trials)
 	return old_state;
 }
 
-if (config("lib_debug") >= 0) {
+if (config("lib_debug") & 3) {
     print "seedrandom(seed1, seed2, size [, trials]) defined";
 }

lib/surd.cal

@@ -261,7 +261,7 @@ define surd_rel(a, b)
 	return sgn(x^2 - y^2 * surd_type) * sgn(x);
 }
 
-if (config("lib_debug") >= 0) {
+if (config("lib_debug") & 3) {
     print "obj surd {a, b} defined";
     print "surd_type defined";
     print "set surd_type as needed";

lib/test1700.cal

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By:	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  *	chongo <was here> /\../\
  *

lib/test2300.cal

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By:	Landon Curt Noll
- *      http://reality.sgi.com/chongo
+ *	http://reality.sgi.com/chongo/
  *
  *	chongo <was here> /\../\
  *

lib/test2600.cal

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By: Ernest Bowen and Landon Curt Noll
- *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo
+ *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo/
  *
  * This library is used by the 2600 series of the regress.cal test suite.
  */

lib/test2700.cal

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By: Ernest Bowen and Landon Curt Noll
- *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo
+ *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo/
  *
  * This library is used by the 2700 series of the regress.cal test suite.
  */

lib/test3100.cal

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By: Ernest Bowen and Landon Curt Noll
- *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo
+ *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo/
  *
  * This library is used by the 3100 series of the regress.cal test suite.
  */

lib/test3300.cal

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By: Ernest Bowen and Landon Curt Noll
- *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo
+ *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo/
  *
  * This library is used by the 3300 series of the regress.cal test suite.
  */

lib/test3400.cal

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By: Ernest Bowen and Landon Curt Noll
- *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo
+ *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo/
  *
  * This library is used by the 3400 series of the regress.cal test suite.
  */

lib/test3500.cal

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By: Ernest Bowen and Landon Curt Noll
- *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo
+ *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo/
  *
  * This library is used by the 3500 series of the regress.cal test suite.
  */

lib/test4000.cal

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By: Ernest Bowen and Landon Curt Noll
- *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo
+ *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo/
  *
  * This library is used by the 4000 series of the regress.cal test suite.
  */

lib/test4100.cal

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By: Ernest Bowen and Landon Curt Noll
- *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo
+ *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo/
  *
  * This library is used by the 4100 series of the regress.cal test suite.
  */

lib/test4600.cal

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By: Ernest Bowen and Landon Curt Noll
- *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo
+ *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo/
  *
  * This library is used by the 4600 series of the regress.cal test suite.
  */

lib/test5100.cal

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By: Ernest Bowen and Landon Curt Noll
- *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo
+ *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo/
  *
  * This library is used by the 5100 series of the regress.cal test suite.
  */

lib/test5200.cal

@@ -4,7 +4,7 @@
  * provided that this copyright notice remains intact.
  *
  * By: Ernest Bowen and Landon Curt Noll
- *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo
+ *     ernie@neumann.une.edu.au and http://reality.sgi.com/chongo/
  *
  * This library is used by the 5200 series of the regress.cal test suite.
  */