Release calc version 2.11.0t7.5

BUGS

@@ -20,11 +20,11 @@ configuration, try backing them out and see if things get better.
 
 To be sure that your version of calc is up to date, check out:
 
-	http://reality.sgi.com/chongo/calc/calc-download.html
+	http://reality.sgi.com/chongo/tech/comp/calc/calc-download.html
 
 The calc web site is located at:
 
-	http://reality.sgi.com/chongo/calc
+	http://reality.sgi.com/chongo/tech/comp/calc
 
 =-=
 
@@ -77,15 +77,3 @@ Known problems or mis-features:
     * There is some places in the source with obscure variable names
       and not much in the way of comments.  We need some major cleanup
       and documentation.
-
-    * On a Dec Alpha, using the Dec Alpha cc (not gcc) make check for
-      version 2.11.0t5.1 fails in the regression test:
-
-	From vandermj@molbio.sbphrd.com  Tue Oct  5 04:06:52 1999
-	Subject: Re: oops, try calc version 2.10.0t5.1
-	Date: Tue, 05 Oct 1999 07:06:30 -0400
-
-	Regular cc on Dec alpha, 'make check' dies with:
-
-	1804: surd_value(a) == 2+3i
-	"": line 1706: Calling qfreenum with nozero links!!!

CHANGES

@@ -96,6 +96,55 @@ Following is the change from calc version 2.11.0t7 to date:
 
     A call of errmax(-1) will prevent errcount from aborting calc.
 
+    Add the function stoponerror(n) which, as the name implies, controls
+    if calc stop on an error based on the value of n:
+
+	n > 0	stop on error even if -c was given on the command line
+	n == 0	if -c, continue, without -c, stop
+	n < 0	continue on error, even if -c was given on the command line
+
+    Calc compilation now stops at the first scanerror.
+
+    Restored the feature where -p disables the printing of leading tabs
+    as of config("tab",0) had been executed.  So using calc in a pipe:
+
+	calc -p 2+17 | whey
+
+     will write '19' instead of '\t19' to the whey command.
+
+     Updated calc man page and help/usage file to reflect recent
+     command line changes.
+
+     Converted start_done into a general calc run state enum called
+     run_state within the calc source.
+
+     Removed README.OLD.
+
+     Added the Makefile variable ${LCC} to invoke the local c compiler.
+     By default, ${CC} also run the ${LCC} compiler.  The distinction is
+     useful when using something such as purify.  In the case of ${LCC},
+     only the local C compiler is invoked.  In the case of ${CC} a purify
+     compile is invoked.  Only the source that must be compiled and run
+     on the local machine use ${LCC}; everything else uses ${CC}.
+
+     Fixed memory buffer ovreread problem in eatstring() in token.c.
+
+     Fixed memory leaks related to putenv().
+
+     Fixed memory leaks realted to srandom().
+
+     Fixed compilation warnings and problems on BSDI.
+
+     Removed ${CCMAIN} as a variable from the Makefile.  Now files
+     use either ${CFLAGS} for general C source and ${ICFLAGS} for
+     intermediate C source (e.g., special code for building hsrc files).
+
+     The main calc URL is now:
+
+	http://reality.sgi.com/chongo/tech/comp/calc
+
+     Misc calc man page fixes.
+
 
 Following is the change from calc version 2.11.0t1 to 2.11.0t6.3:
 

Makefile

@@ -352,7 +352,7 @@ CALCPAGER= more
 #CALCPAGER= cat
 #CALCPAGER= less
 
-# Debug/Optimize options for ${CC}
+# Debug/Optimize options for ${CC} and ${LCC}
 #
 #DEBUG= -O
 #DEBUG= -O -g
@@ -393,7 +393,7 @@ NO_SHARED=
 #NO_SHARED= -non_shared
 
 # On some systems where you are disabling dynamic shared libs, you may
-# need to pass a special flag to ${CC} during linking stage.
+# need to pass a special flag to ${CC} and ${LCC} during linking stage.
 #
 #    System type    			    NO_SHARED recommendation
 #
@@ -516,13 +516,12 @@ ALLOW_CUSTOM= -DCUSTOM
 # CFLAGS are all flags given to ${CC} [[often includes CCOPT, CCWARN, CCMISC]]
 # ICFLAGS are given to ${CC} for intermediate progs
 #
-# CCMAIN are flags for ${CC} when files with main() instead of CFLAGS
-#
 # LCFLAGS are CC-style flags for ${LINT}
 # LDFLAGS are flags given to ${CC} for linking .o files
 # ILDFLAGS are flags given to ${CC} for linking .o files for intermediate progs
 #
-# CC is how the the C compiler is invoked
+# LCC how the the C compiler is invoked on locally executed intermediate progs
+# CC is how the the C compiler is invoked (with an optional Purify)
 #
 ###
 #
@@ -540,13 +539,12 @@ CCMISC=
 CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 ICFLAGS= ${CCWARN} ${CCMISC}
 #
-CCMAIN= ${ICFLAGS}
-#
 LCFLAGS=
 LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
 ILDFLAGS=
 #
-CC= ${PURIFY} gcc
+LCC= gcc
+CC= ${PURIFY} ${LCC}
 #
 ###
 #
@@ -562,14 +560,13 @@ CC= ${PURIFY} gcc
 #CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 #ICFLAGS= ${CCWARN} ${CCMISC}
 #
-#CCMAIN= ${ICFLAGS}
-#
 #LCFLAGS=
 #LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
 #ILDFLAGS=
 #
-#CC= ${PURIFY} gcc
-#CC= ${PURIFY} gcc2
+#LCC= gcc
+#LCC= gcc2
+#CC= ${PURIFY} ${LCC}
 #
 ###
 #
@@ -582,13 +579,12 @@ CC= ${PURIFY} gcc
 #CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 #ICFLAGS= ${CCWARN} ${CCMISC}
 #
-#CCMAIN= ${ICFLAGS}
-#
 #LCFLAGS=
 #LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
 #ILDFLAGS=
 #
-#CC= ${PURIFY} cc
+#LCC= cc
+#CC= ${PURIFY} ${LCC}
 #
 ###
 #
@@ -613,13 +609,12 @@ CC= ${PURIFY} gcc
 #CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 #ICFLAGS= ${CCWARN} ${CCMISC}
 #
-#CCMAIN= ${ICFLAGS}
-#
 #LCFLAGS=
 #LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
 #ILDFLAGS=
 #
-#CC= ${PURIFY} cc -n32 -xansi
+#LCC= cc -n32 -xansi
+#CC= ${PURIFY} ${LCC}
 #
 ###
 #
@@ -638,13 +633,12 @@ CC= ${PURIFY} gcc
 #CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 #ICFLAGS= ${CCWARN} ${CCMISC}
 #
-#CCMAIN= ${ICFLAGS}
-#
 #LCFLAGS=
 #LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
 #ILDFLAGS=
 #
-#CC= ${PURIFY} cc
+#LCC= cc
+#CC= ${PURIFY} ${LCC}
 #
 ###
 #
@@ -657,13 +651,12 @@ CC= ${PURIFY} gcc
 #CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 #ICFLAGS= ${CCWARN} ${CCMISC}
 #
-#CCMAIN= ${ICFLAGS}
-#
 #LCFLAGS=
 #LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
 #ILDFLAGS=
 #
-#CC= ${PURIFY} cc
+#LCC= cc
+#CC= ${PURIFY} ${LCC}
 #
 ###
 #
@@ -682,13 +675,12 @@ CC= ${PURIFY} gcc
 #CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 #ICFLAGS= ${CCWARN} ${CCMISC}
 #
-#CCMAIN= ${ICFLAGS}
-#
 #LCFLAGS=
 #LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
 #ILDFLAGS=
 #
-#CC= ${PURIFY} cc
+#LCC= cc
+#CC= ${PURIFY} ${LCC}
 #
 ###
 #
@@ -702,15 +694,14 @@ CC= ${PURIFY} gcc
 #CCMISC=
 #
 #CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
-#ICFLAGS= ${CCWARN} ${CCMISC}
-#
-#CCMAIN= ${ICFLAGS}
+#ICFLAGS= ${CCWARN} ${CCMISC} -Wno-unused
 #
 #LCFLAGS=
 #LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
 #ILDFLAGS=
 #
-#CC= ${PURIFY} gcc
+#LCC= gcc
+#CC= ${PURIFY} ${LCC}
 #
 ###
 #
@@ -724,15 +715,14 @@ CC= ${PURIFY} gcc
 #CCMISC=
 #
 #CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
-#ICFLAGS= ${CCWARN} ${CCMISC}
-#
-#CCMAIN= ${ICFLAGS}
+#ICFLAGS= ${CCWARN} ${CCMISC} -Wno-unused
 #
 #LCFLAGS=
 #LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
 #ILDFLAGS=
 #
-#CC= ${PURIFY} cc
+#LCC= cc
+#CC= ${PURIFY} ${LCC}
 
 ##############################################################################
 #-=-=-=-=-=-=-=-=- Be careful if you change something below -=-=-=-=-=-=-=-=-#
@@ -887,6 +877,7 @@ CUSTOM_PASSDOWN= Q="${Q}" \
     LCFLAGS="${LCFLAGS}" \
     LDFLAGS="${LDFLAGS}" \
     ILDFLAGS="${ILDFLAGS}" \
+    LCC="${LCC}" \
     CC="${CC}" \
     MAKE_FILE=${MAKE_FILE} \
     SED=${SED} \
@@ -909,11 +900,11 @@ SAMPLE_PASSDOWN= Q="${Q}" \
     CCMISC="${CCMISC}" \
     CFLAGS="${CFLAGS} ${ALLOW_CUSTOM}" \
     ICFLAGS="${ICFLAGS}" \
-    CCMAIN="${CCMAIN}" \
     LCFLAGS="${LCFLAGS}" \
     LDFLAGS="${LDFLAGS}" \
     ILDFLAGS="${ILDFLAGS}" \
     CALC_LIBS="../libcalc.a ../custom/libcustcalc.a" \
+    LCC="${LCC}" \
     CC="${CC}" \
     MAKE_FILE=${MAKE_FILE} \
     SED=${SED} \
@@ -931,7 +922,7 @@ C_SRC= ${LIBSRC} ${CALCSRC} ${UTIL_C_SRC}
 # These files are found (but not built) in the distribution
 #
 DISTLIST= ${C_SRC} ${H_SRC} ${MAKE_FILE} BUGS CHANGES LIBRARY README \
-	calc.man lint.sed README.OLD HOWTO.INSTALL ${UTIL_MISC_SRC}
+	calc.man lint.sed HOWTO.INSTALL ${UTIL_MISC_SRC}
 
 # complete list of .o files
 #
@@ -981,7 +972,7 @@ calc.1: calc.man ${MAKE_FILE}
 ##
 
 calc.o: calc.c ${MAKE_FILE}
-	${CC} ${CCMAIN} ${CCOPT} ${ALLOW_CUSTOM} -c calc.c
+	${CC} ${CFLAGS} ${CCOPT} ${ALLOW_CUSTOM} -c calc.c
 
 custom.o: custom.c ${MAKE_FILE}
 	${CC} ${CFLAGS} ${ALLOW_CUSTOM} -c custom.c
@@ -1379,8 +1370,8 @@ longlong.h: longlong.c have_stdlib.h have_string.h ${MAKE_FILE}
 	${Q}echo '' >> longlong.h
 	${Q}echo '/* do we have/want to use a long long type? */' >> longlong.h
 	-${Q}rm -f longlong.o longlong
-	-${Q}${CC} ${CCMAIN} longlong.c -c 2>/dev/null; true
-	-${Q}${CC} ${ILDFLAGS} longlong.o -o longlong 2>/dev/null; true
+	-${Q}${LCC} ${ICFLAGS} longlong.c -c 2>/dev/null; true
+	-${Q}${LCC} ${ILDFLAGS} longlong.o -o longlong 2>/dev/null; true
 	-${Q}${SHELL} -c "./longlong ${LONGLONG_BITS} > ll_tmp 2>/dev/null" \
 	    >/dev/null 2>&1; true
 	-${Q}if [ -s ll_tmp ]; then \
@@ -1418,8 +1409,8 @@ have_fpos.h: have_fpos.c ${MAKE_FILE}
 	${Q}echo '' >> have_fpos.h
 	${Q}echo '/* do we have fgetpos & fsetpos functions? */' >> have_fpos.h
 	-${Q}rm -f have_fpos.o have_fpos
-	-${Q}${CC} ${HAVE_FPOS} ${CCMAIN} have_fpos.c -c 2>/dev/null; true
-	-${Q}${CC} ${ILDFLAGS} have_fpos.o -o have_fpos 2>/dev/null; true
+	-${Q}${LCC} ${HAVE_FPOS} ${ICFLAGS} have_fpos.c -c 2>/dev/null; true
+	-${Q}${LCC} ${ILDFLAGS} have_fpos.o -o have_fpos 2>/dev/null; true
 	-${Q}${SHELL} -c "./have_fpos > fpos_tmp 2>/dev/null" \
 	    >/dev/null 2>&1; true
 	-${Q}if [ -s fpos_tmp ]; then \
@@ -1459,8 +1450,8 @@ fposval.h: fposval.c have_fpos.h have_offscl.h have_posscl.h \
 	${Q}echo '' >> fposval.h
 	${Q}echo '/* what are our file position & size types? */' >> fposval.h
 	-${Q}rm -f fposval.o fposval
-	-${Q}${CC} ${CCMAIN} fposval.c -c 2>/dev/null; true
-	-${Q}${CC} ${ILDFLAGS} fposval.o -o fposval 2>/dev/null; true
+	-${Q}${LCC} ${ICFLAGS} fposval.c -c 2>/dev/null; true
+	-${Q}${LCC} ${ILDFLAGS} fposval.o -o fposval 2>/dev/null; true
 	${Q}${SHELL} -c "./fposval fposv_tmp >> fposval.h 2>/dev/null" \
 	    >/dev/null 2>&1; true
 	${Q}echo '' >> fposval.h
@@ -1492,8 +1483,8 @@ have_const.h: have_const.c ${MAKE_FILE}
 	${Q}echo '' >> have_const.h
 	${Q}echo '/* do we have or want const? */' >> have_const.h
 	-${Q}rm -f have_const.o have_const
-	-${Q}${CC} ${CCMAIN} ${HAVE_CONST} have_const.c -c 2>/dev/null; true
-	-${Q}${CC} ${ILDFLAGS} have_const.o -o have_const 2>/dev/null; true
+	-${Q}${LCC} ${ICFLAGS} ${HAVE_CONST} have_const.c -c 2>/dev/null; true
+	-${Q}${LCC} ${ILDFLAGS} have_const.o -o have_const 2>/dev/null; true
 	-${Q}${SHELL} -c "./have_const > const_tmp 2>/dev/null" \
 	    >/dev/null 2>&1; true
 	-${Q}if [ -s const_tmp ]; then \
@@ -1531,8 +1522,8 @@ have_offscl.h: have_offscl.c ${MAKE_FILE}
 	${Q}echo '' >> have_offscl.h
 	${Q}echo '' >> have_offscl.h
 	-${Q}rm -f have_offscl.o have_offscl
-	-${Q}${CC} ${CCMAIN} ${HAVE_OFFSCL} have_offscl.c -c 2>/dev/null; true
-	-${Q}${CC} ${ILDFLAGS} have_offscl.o -o have_offscl 2>/dev/null; true
+	-${Q}${LCC} ${ICFLAGS} ${HAVE_OFFSCL} have_offscl.c -c 2>/dev/null; true
+	-${Q}${LCC} ${ILDFLAGS} have_offscl.o -o have_offscl 2>/dev/null; true
 	-${Q}${SHELL} -c "./have_offscl > offscl_tmp 2>/dev/null" \
 	    >/dev/null 2>&1; true
 	-${Q}if [ -s offscl_tmp ]; then \
@@ -1569,8 +1560,8 @@ have_posscl.h: have_posscl.c have_fpos.h ${MAKE_FILE}
 	${Q}echo '' >> have_posscl.h
 	${Q}echo '' >> have_posscl.h
 	-${Q}rm -f have_posscl.o have_posscl
-	-${Q}${CC} ${CCMAIN} ${HAVE_POSSCL} have_posscl.c -c 2>/dev/null; true
-	-${Q}${CC} ${ILDFLAGS} have_posscl.o -o have_posscl 2>/dev/null; true
+	-${Q}${LCC} ${ICFLAGS} ${HAVE_POSSCL} have_posscl.c -c 2>/dev/null; true
+	-${Q}${LCC} ${ILDFLAGS} have_posscl.o -o have_posscl 2>/dev/null; true
 	-${Q}${SHELL} -c "./have_posscl > posscl_tmp 2>/dev/null" \
 	    >/dev/null 2>&1; true
 	-${Q}if [ -s posscl_tmp ]; then \
@@ -1621,8 +1612,8 @@ align32.h: align32.c longbits.h have_unistd.h ${MAKE_FILE}
 	fi
 	-${Q}if [ X = X${ALIGN32} ]; then \
 	    rm -f align32.o align32; \
-	    ${CC} ${CCMAIN} ${ALIGN32} align32.c -c 2>/dev/null; \
-	    ${CC} ${ILDFLAGS} align32.o -o align32 2>/dev/null; \
+	    ${LCC} ${ICFLAGS} ${ALIGN32} align32.c -c 2>/dev/null; \
+	    ${LCC} ${ILDFLAGS} align32.o -o align32 2>/dev/null; \
 	    ${SHELL} -c "./align32 >align32_tmp 2>/dev/null" >/dev/null 2>&1; \
 	    if [ -s align32_tmp ]; then \
 		cat align32_tmp >> align32.h; \
@@ -1662,8 +1653,8 @@ have_uid_t.h: have_uid_t.c have_unistd.h ${MAKE_FILE}
 	${Q}echo '' >> have_uid_t.h
 	${Q}echo '/* do we have or want uid_t? */' >> have_uid_t.h
 	-${Q}rm -f have_uid_t.o have_uid_t
-	-${Q}${CC} ${CCMAIN} ${HAVE_UID_T} have_uid_t.c -c 2>/dev/null; true
-	-${Q}${CC} ${ILDFLAGS} have_uid_t.o -o have_uid_t 2>/dev/null; true
+	-${Q}${LCC} ${ICFLAGS} ${HAVE_UID_T} have_uid_t.c -c 2>/dev/null; true
+	-${Q}${LCC} ${ILDFLAGS} have_uid_t.o -o have_uid_t 2>/dev/null; true
 	-${Q}${SHELL} -c "./have_uid_t > uid_tmp 2>/dev/null" \
 	    >/dev/null 2>&1; true
 	-${Q}if [ -s uid_tmp ]; then \
@@ -1701,8 +1692,8 @@ have_newstr.h: have_newstr.c ${MAKE_FILE}
 	${Q}echo '/* do we have or want memcpy(), memset() & strchr()? */' \
 							>> have_newstr.h
 	-${Q}rm -f have_newstr.o have_newstr
-	-${Q}${CC} ${CCMAIN} ${HAVE_NEWSTR} have_newstr.c -c 2>/dev/null; true
-	-${Q}${CC} ${ILDFLAGS} have_newstr.o -o have_newstr 2>/dev/null; true
+	-${Q}${LCC} ${ICFLAGS} ${HAVE_NEWSTR} have_newstr.c -c 2>/dev/null; true
+	-${Q}${LCC} ${ILDFLAGS} have_newstr.o -o have_newstr 2>/dev/null; true
 	-${Q}${SHELL} -c "./have_newstr > newstr_tmp 2>/dev/null" \
 	    >/dev/null 2>&1; true
 	-${Q}if [ -s newstr_tmp ]; then \
@@ -1739,8 +1730,8 @@ have_memmv.h: have_memmv.c ${MAKE_FILE}
 	${Q}echo '' >> have_memmv.h
 	${Q}echo '/* do we have or want memmove()? */' >> have_memmv.h
 	-${Q}rm -f have_memmv.o have_memmv
-	-${Q}${CC} ${CCMAIN} ${HAVE_MEMMOVE} have_memmv.c -c 2>/dev/null; true
-	-${Q}${CC} ${ILDFLAGS} have_memmv.o -o have_memmv 2>/dev/null; true
+	-${Q}${LCC} ${ICFLAGS} ${HAVE_MEMMOVE} have_memmv.c -c 2>/dev/null; true
+	-${Q}${LCC} ${ILDFLAGS} have_memmv.o -o have_memmv 2>/dev/null; true
 	-${Q}${SHELL} -c "./have_memmv > newstr_tmp 2>/dev/null" \
 	    >/dev/null 2>&1; true
 	-${Q}if [ -s newstr_tmp ]; then \
@@ -1776,8 +1767,9 @@ args.h: have_stdvs.c have_varvs.c have_string.h have_unistd.h have_string.h
 	${Q}echo '' >> args.h
 	${Q}echo '' >> args.h
 	-${Q}rm -f have_stdvs.o have_stdvs
-	-${Q}${CC} ${CCMAIN} ${HAVE_VSPRINTF} have_stdvs.c -c 2>/dev/null; true
-	-${Q}${CC} ${ILDFLAGS} have_stdvs.o -o have_stdvs 2>/dev/null; true
+	-${Q}${LCC} ${ICFLAGS} ${HAVE_VSPRINTF} have_stdvs.c -c \
+		2>/dev/null; true
+	-${Q}${LCC} ${ILDFLAGS} have_stdvs.o -o have_stdvs 2>/dev/null; true
 	-${Q}if ./have_stdvs >>args.h 2>/dev/null; then \
 	    touch have_args; \
 	else \
@@ -1785,8 +1777,9 @@ args.h: have_stdvs.c have_varvs.c have_string.h have_unistd.h have_string.h
 	fi
 	-${Q}if [ ! -f have_args ] && [ X"${HAVE_VSPRINTF}" = X ]; then \
 	    rm -f have_stdvs.o have_stdvs have_varvs.o have_varvs; \
-	    ${CC} ${CCMAIN} -DDONT_HAVE_VSPRINTF have_varvs.c -c 2>/dev/null; \
-	    ${CC} ${ILDFLAGS} have_varvs.o -o have_varvs 2>/dev/null; \
+	    ${LCC} ${ICFLAGS} -DDONT_HAVE_VSPRINTF have_varvs.c -c \
+		    2>/dev/null; \
+	    ${LCC} ${ILDFLAGS} have_varvs.o -o have_varvs 2>/dev/null; \
 	    if ./have_varvs >>args.h 2>/dev/null; then \
 		touch have_args; \
 	    else \
@@ -1865,17 +1858,17 @@ calc_errno.h: calc_errno.c ${MAKE_FILE}
 	    echo 'extern int sys_nerr;		' \
 		 '/* number of system errors */' >> calc_errno.h; \
 	else \
-	    ${CC} ${CCMAIN} -DTRY_ERRNO_NO_DECL \
+	    ${LCC} ${ICFLAGS} -DTRY_ERRNO_NO_DECL \
 		  calc_errno.c -o calc_errno 2>calc_errno_tmp; \
 	    if [ -x ./calc_errno ]; then \
 		./calc_errno >> calc_errno.h; \
 	    else \
-		${CC} ${CCMAIN} -DTRY_ERRNO_STD_DECL \
+		${LCC} ${ICFLAGS} -DTRY_ERRNO_STD_DECL \
 		      calc_errno.c -o calc_errno 2>calc_errno_tmp; \
 		if [ -x ./calc_errno ]; then \
 		    ./calc_errno >> calc_errno.h; \
 		else \
-		    ${CC} ${CCMAIN} -DTRY_ERRNO_OLD_DECL \
+		    ${LCC} ${ICFLAGS} -DTRY_ERRNO_OLD_DECL \
 			  calc_errno.c -o calc_errno 2>calc_errno_tmp; \
 		    if [ -x ./calc_errno ]; then \
 			./calc_errno >> calc_errno.h; \
@@ -1971,16 +1964,16 @@ calcerr.c: calcerr.tbl calcerr_c.sed calcerr_c.awk ${MAKE_FILE}
 ##
 
 endian.o: endian.c have_unistd.h
-	${CC} ${CCMAIN} endian.c -c
+	${LCC} ${ICFLAGS} endian.c -c
 
 endian: endian.o
-	${CC} ${ILDFLAGS} endian.o -o endian
+	${LCC} ${ICFLAGS} endian.o -o endian
 
 longbits.o: longbits.c longlong.h have_unistd.h
-	${CC} ${CCMAIN} longbits.c -c
+	${LCC} ${ICFLAGS} longbits.c -c
 
 longbits: longbits.o
-	${CC} ${ILDFLAGS} longbits.o -o longbits
+	${LCC} ${ICFLAGS} longbits.o -o longbits
 
 ##
 #
@@ -2332,10 +2325,10 @@ env:
 	@echo "CCMISC=${CCMISC}"; echo ""
 	@echo "CFLAGS=${CFLAGS}"; echo ""
 	@echo "ICFLAGS=${ICFLAGS}"; echo ""
-	@echo "CCMAIN=${CCMAIN}"; echo ""
 	@echo "LCFLAGS=${LCFLAGS}"; echo ""
 	@echo "LDFLAGS=${LDFLAGS}"; echo ""
 	@echo "ILDFLAGS=${ILDFLAGS}"; echo ""
+	@echo "LCC=${LCC}"; echo ""
 	@echo "CC=${CC}"; echo ""
 	@echo "SHELL=${SHELL}"; echo ""
 	@echo "MAKE=${MAKE}"; echo ""

README

@@ -4,7 +4,7 @@ See the HOWTO.INSTALL file for information on how to build and install calc.
 
 To be sure that your version of calc is up to date, check out:
 
-	http://reality.sgi.com/chongo/calc/calc-download.html
+	http://reality.sgi.com/chongo/tech/comp/calc/calc-download.html
 
 We are interested in any/all feedback on recent versions of calc.
 In particular we would like to hear about:
@@ -84,4 +84,4 @@ your full name.
 
 The calc web site is located at:
 
-	http://reality.sgi.com/chongo/calc
+	http://reality.sgi.com/chongo/tech/comp/calc

README.OLD

@@ -1,73 +0,0 @@
-# Copyright (c) 1997 David I. Bell
-# Permission is granted to use, distribute, or modify this source,
-# provided that this copyright notice remains intact.
-#
-# Arbitrary precision calculator.
-
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-    NOTE: This is an old historic README.  We recommend that
-	  you read README and HOWTO.INSTALL for more info.
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-I am allowing this calculator to be freely distributed for your enjoyment.
-Like all multi-precision programs, you should not depend absolutely on
-its results, since bugs in such programs can be insidious and only rarely
-show up.
-
--dbell-
-
-p.s. By Landon Curt Noll:
-
-Building calc in 3 easy steps:
-
-    1) Look at the makefile, and adjust it to suit your needs.
-
-       Here are some Makefile hints:
-
-	   In the past, some people have had to adjust the VARARG or
-	   TERMCONTROL because the Makefile cannot always guess
-	   correctly for certain systems.  You may need to play with
-	   these values if you experience problems.
-
-	   The default compiler used is 'cc'.  The default compiler flag
-	   is '-O'.  If you have gcc, or gcc v2 (or better) you should use
-	   that instead.   Some compilers allow for optimization beyond
-	   just -O (gcc v2 has -O2, mips cc has -O3).  You should select
-	   the best flag for speed optimization.  Calc can be cpu intensive
-	   so selecting a quality compiler and good optimization level can
-	   really pay off.
-
-    2) build calc:
-
-	make all
-
-    3) test calc:
-
-	make check
-
- ==>>>If you run into problems, follow the instructions in the BUGS file<<<==
-
-=-=
-
-For further reading:
-
-    LIBRARY
-    	explains how programs can use libcalc.a to take advantage
-	of the calc multi-precision routines.
-
-    help/todo
-	current wish list for calc
-
-    CHANGES
-	recent changes to calc
-
-    BUGS
-	known bugs, mis-features and how to report problems
-
-    help/full
-	full set of calc documentation
-
-=-=
-
-David I. Bell    dbell@auug.org.au
-chongo <Landon Curt Noll> /\../\

calc.c

@@ -11,7 +11,6 @@
 #include <pwd.h>
 #include <sys/types.h>
 #include <ctype.h>
-#include <setjmp.h>
 
 #define CALC_C
 #include "calc.h"
@@ -37,39 +36,13 @@
 #include <stdlib.h>
 #endif
 
-
-/*
- * external definitions and functions
- */
-extern int abortlevel;		/* current level of aborts */
-extern BOOL inputwait;		/* TRUE if in a terminal input wait */
-extern jmp_buf jmpbuf;		/* for errors */
-extern int isatty(int tty);	/* TRUE if fd is a tty */
-
-extern int p_flag;		/* TRUE => pipe mode */
-extern int q_flag;		/* TRUE => don't execute rc files */
-extern int u_flag;		/* TRUE => unbuffer stdin and stdout */
-extern int d_flag;		/* TRUE => disable heading, lib_debug == 0 */
-
-extern char *pager;		/* $PAGER or default */
-extern int stdin_tty;		/* TRUE if stdin is a tty */
-extern int interactive;		/* TRUE if interactive session (no cmd args) */
-extern char *program;		/* our name */
-extern char cmdbuf[];		/* command line expression */
-
-extern char *version(void);	/* return version string */
-
-
 /*
  * static definitions and functions
  */
-static char *usage = "usage: %s [-C] [-e] [-h] [-i] [-m mode] [-n] [-p]\n"
-		     "\t[-q] [-u] [-c] [-d] [[--] calc_cmd ...]\n";
+static char *usage = "usage: %s [-c] [-C] [-d] [-e] [-h] [-i] [-m mode]\n"
+		     "\t[-n] [-p] [-q] [-u] [-v] [[--] calc_cmd ...]\n";
 static void intint(int arg);	/* interrupt routine */
 
-static int havecommands;
-static int c_flag;		/* To permit continuation after error */
-static int i_flag;		/* To go interactive if permitted */
 
 /*
  * Top level calculator routine.
@@ -162,8 +135,7 @@ main(int argc, char **argv)
 			exit(1);
 		}
 	}
-	interactive = (optind >= argc);
-	havecommands = !interactive;
+	havecommands = (optind < argc);
 
 	/*
 	 * look at the length of any trailing command args
@@ -257,52 +229,73 @@ main(int argc, char **argv)
 		post_init = TRUE;
 	}
 
+	/*
+	 * (re)establish the interrupt handler
+	 */
 	(void) signal(SIGINT, intint);
 
-	if (start_done == 0) {
+	/*
+	 * execute calc code based on the run state
+	 */
+	if (run_state == RUN_PRE_BEGIN) {
 		if (!q_flag && allow_read) {
-			start_done = 1;
+			run_state = RUN_PRE_RCFILES;
 			runrcfiles();
 		}
-		start_done = 2;
+		run_state = RUN_POST_RCFILES;
 	}
-	if (start_done == 1) {
+	if (run_state == RUN_PRE_RCFILES) {
 		fprintf(stderr, "Execution error in rcfiles\n");
-		if (c_flag)
+		if ((c_flag && !stoponerror) || stoponerror < 0) {
 			getcommands(FALSE);
-		start_done = 2;
+			run_state = RUN_POST_RCFILES;
+		} else {
+			if ((havecommands && !i_flag) || !stdin_tty)
+				run_state = RUN_STOP_ON_ERROR;
+			else if (havecommands)
+				run_state = RUN_POST_CMD_ARGS;
+			else
+				run_state = RUN_POST_RCFILES;
+		}
 	}
-	if (start_done == 2) {
+	if (run_state == RUN_POST_RCFILES) {
 		if (havecommands) {
-			start_done = 3;
+			run_state = RUN_PRE_CMD_ARGS;
 			(void) openstring(cmdbuf);
 			getcommands(FALSE);
 		}
-		start_done = 4;
+		run_state = RUN_POST_CMD_ARGS;
 	}
-	if (start_done == 3) {
+	if (run_state == RUN_PRE_CMD_ARGS) {
 		fprintf(stderr, "Execution error in commands\n");
-		if (c_flag)
+		if ((c_flag && !stoponerror) || stoponerror < 0) {
 			getcommands(FALSE);
-		else
+			run_state = RUN_POST_CMD_ARGS;
+		} else {
 			closeinput();
-		start_done = 4;
+			if (!stdin_tty || !i_flag)
+				run_state = RUN_STOP_ON_ERROR;
+			else
+				run_state = RUN_POST_CMD_ARGS;
+		}
 	}
-	if (start_done == 4) {
+	if (run_state == RUN_POST_CMD_ARGS) {
 		if (stdin_tty && ((havecommands && !i_flag) || p_flag))
-			start_done = 6;
+			run_state = RUN_NOT_TOP_LEVEL;
 		else
 			openterminal();
-	}
-	else if (start_done == 5) {
-		if (!stdin_tty && !c_flag) {
-			start_done = 6;
-		}
-		reinitialize();
+	} else if (run_state == RUN_TOP_LEVEL) {
+		if (!stdin_tty && (!c_flag || stoponerror) &&
+		    stoponerror >= 0) {
+			run_state = RUN_STOP_ON_ERROR;
+		} else if ((c_flag && !stoponerror) || stoponerror < 0)
+			getcommands(FALSE);
+		else
+			reinitialize();
 	}
 
-	if (start_done < 6) {
-		start_done = 5;
+	if (run_state < RUN_NOT_TOP_LEVEL) {
+		run_state = RUN_TOP_LEVEL;
 		getcommands(TRUE);
 	}
 
@@ -310,7 +303,8 @@ main(int argc, char **argv)
 	 * all done
 	 */
 	libcalc_call_me_last();
-	return (start_done - 6) ? 1 : 0;
+	return (run_state == RUN_STOP_ON_ERROR ||
+		run_state == RUN_UNKNOWN) ? 1 : 0;
 }
 
 

calc.h

@@ -10,6 +10,7 @@
 #if !defined(__CALC_H__)
 #define	__CALC_H__
 
+#include <setjmp.h>
 
 #include "value.h"
 
@@ -126,7 +127,6 @@ extern long linenumber(void);
 extern void runrcfiles(void);
 extern void closeinput(void);
 
-
 /*
  * Other routines.
  */
@@ -140,21 +140,39 @@ extern void libcalc_call_me_first(void);
 extern void libcalc_call_me_last(void);
 extern void showerrors(void);
 
-
 /*
  * Initialization
  */
 extern void initialize(void);
 extern void reinitialize(void);
-
+extern int isatty(int tty);	/* TRUE if fd is a tty */
+extern char *version(void);	/* return version string */
+extern int post_init;		/* TRUE => setjmp for math_error is ready */
 
 /*
- * Global data definitions.
+ * global flags and definitions
  */
+extern int abortlevel;		/* current level of aborts */
+extern BOOL inputwait;		/* TRUE if in a terminal input wait */
+extern jmp_buf jmpbuf;		/* for errors */
+
+extern int p_flag;		/* TRUE => pipe mode */
+extern int q_flag;		/* TRUE => don't execute rc files */
+extern int u_flag;		/* TRUE => unbuffer stdin and stdout */
+extern int d_flag;		/* TRUE => disable heading, lib_debug == 0 */
+extern int c_flag;		/* TRUE => continue after error if permitted */
+extern int i_flag;		/* TRUE => try to go interactive after error */
+extern int stoponerror;		/* >0 => stop, <0 => continue, ==0 => use -c */
+
+extern char *pager;		/* $PAGER or default */
+extern int stdin_tty;		/* TRUE if stdin is a tty */
+extern int havecommands;	/* TRUE if have cmd args) */
+extern char *program;		/* our name */
+extern char cmdbuf[];		/* command line expression */
+
 extern int abortlevel;		/* current level of aborts */
 extern BOOL inputwait;		/* TRUE if in a terminal input wait */
 extern VALUE *stack;		/* execution stack */
-extern int start_done;		/* TRUE => start up processing finished */
 extern int dumpnames;		/* TRUE => dump names rather than indices */
 
 extern char *calcpath;		/* $CALCPATH or default */
@@ -172,8 +190,21 @@ extern int allow_read;	/* FALSE => may not open any files for reading */
 extern int allow_write;	/* FALSE => may not open any files for writing */
 extern int allow_exec;	/* FALSE => may not execute any commands */
 
-extern int post_init;	/* TRUE => setjmp for math_error is ready */
-
+/*
+ * calc startup and run state
+ */
+typedef enum {
+    RUN_UNKNOWN = -1,		/* unknown or unset start state */
+    RUN_PRE_BEGIN = 0,		/* pre-startup state, calc execution started */
+    RUN_PRE_RCFILES = 1,	/* rc files about to or are being evaluated */
+    RUN_POST_RCFILES = 2,	/* rc files have been evaluated */
+    RUN_PRE_CMD_ARGS = 3,	/* cmd_args about to or are being evaluated */
+    RUN_POST_CMD_ARGS = 4,	/* cmd_args have been evaluated */
+    RUN_TOP_LEVEL = 5,		/* running at the top interactive level */
+    RUN_NOT_TOP_LEVEL = 6,	/* running not at the top interactive level */
+    RUN_STOP_ON_ERROR = 7	/* we need to stop due to errors */
+} run;
+extern run run_state;
 
 /*
  * calc version information

calc.man

@@ -1,190 +1,356 @@
 .\"
-.\" Copyright (c) 1994 David I. Bell and Landon Curt Noll
+.\" Copyright (c) 1993 David I. Bell and Landon Curt Noll
+.\" Original man page dated 15nov93
+.\" Copyright (c) 1999 David I. Bell and Landon Curt Noll
 .\" Permission is granted to use, distribute, or modify this source,
 .\" provided that this copyright notice remains intact.
 .\"
 .\" calculator by David I. Bell
 .\" man page by Landon Noll
-.TH calc 1 "^..^" "15nov93"
+.TH calc 1 "^..^" "15Oct1999"
 .SH NAME
 calc \- arbitrary precision calculator
 .SH SYNOPSIS
 \fIcalc\fP
-[\fI\-h\fP]
-[\fI\-m mode\fP]
-[\fI\-p\fP]
-[\fI\-q\fP]
-[\fI\-u\fP]
-[\fI\-v\fP]
-[\fIcalc_cmd \&.\|.\|.\fp]
+.RB [ \-c ]
+.RB [ \-C ]
+.RB [ \-d ]
+.RB [ \-e ]
+.RB [ \-h ]
+.RB [ \-i ]
+.RB [ \-m\ \&mode ]
+.br
+.in +5n
+.RB [ \-n ]
+.RB [ \-p ]
+.RB [ \-q ]
+.RB [ \-u ]
+.RB [ \-v ]
+.RB [ calc_cmd\ \&.\|.\|. ]
+.in -5n
 .SH DESCRIPTION
 \&
 .br
 CALC COMMAND LINE
 .PP
+
 .TP
-\fI\-h\fP
-Print a help message.
-This option implies \fI \-q\fP.
-This is equivalent to the calc command \fIhelp help\fP.
-The help facility is disabled unless the \fImode\fP is 5 or 7.
-See \fI\-m\fP below.
-.sp
-.TP
-\fI\-m mode\fP
-This flag sets the permission mode of calc.
-It controls the ability for \fIcalc\fP to open files
-and execute programs.
-\fIMode\fP may be a number from 0 to 7.
-.sp
-The \fImode\fP value is interpreted in a way similar
-to that of the \fRchmod(1)\fP octal mode:
-.sp
-.in +0.5i
+.B \-c
+Continue reading command lines even after an execution
+error has caused the abandonment of a line.
+.sp 1
+For example:
+.sp 1
+.in +5n
 .nf
-0   do not open any file, do not execute progs
-1   do not open any file
-2   do not open files for reading, do not execute progs
-3   do not open files for reading
-4   do not open files for writing, do not execute progs
-5   do not open files for writing
-6   do not execute any program
-7   allow everything (default mode)
+calc read many_errors.cal
 .fi
-.in -0.5i
-.sp
-If one wished to run calc from a privledged user, one might
-want to use \fI\-m 0\fP in an effort to make calc more secure.
-.sp
-\fIMode\fP bits for reading and writing apply only on an open.
+.in -5n
+.sp 1
+will cause
+.B calc
+to abort on the first error, whereas:
+.sp 1
+.in +5n
+.nf
+calc -c read many_errors.cal
+.fi
+.in -5n
+.sp 1
+will
+cause
+.B calc
+to try to process each line being read
+despite the errors that it encounters.
+
+.TP
+.B \-C
+Permit the execution of custom builtin functions.  Without
+this flag, calling the custom() builtin function will
+simply generate an error.
+.sp 1
+Use if this flag may cause
+.B calc
+to execute functions that
+are non-standard and that are not portable.  Custom builtin
+functions are disabled by default for this reason.
+
+.TP
+.B \-d
+Disable the printing of the opening title.  The printing
+of library debug and informational messages is also disabled
+as if \fBconfig("lib_debug", 0)\fP had been executed.
+.sp 1
+For example:
+.sp 1
+.in +5n
+calc 'read qtime; qtime(2)'
+.in -5n
+.sp 1
+will output something like:
+.sp 1
+.in +5n
+.nf
+qtime(utc_hr_offset) defined
+It's nearly ten past six.
+.fi
+.in -5n
+.sp 1
+whereas:
+.sp 1
+.in +5n
+.nf
+calc -d 'read qtime; qtime(2)'
+.fi
+.in -5n
+.sp 1
+will just say:
+.sp 1
+.in +5n
+.nf
+It's nearly ten past six.
+.fi
+.in -5n
+.sp 1
+
+.TP
+.B \-e
+Ignore any environment variables on startup.
+The getenv() builtin will still return values, however.
+
+.TP
+.B \-h
+Print a help message.  This option implies
+.BR \-q .
+This
+is equivalent to the
+.B calc
+command help help.
+The help facility is disabled unless the mode is 5 or 7.
+See
+.BR \-m .
+
+.TP
+.B \-i
+Become interactive if possible.
+Be default, if
+.I calc_cmd
+args are given,
+.B calc
+will execute them and exit.
+This flag args are given,
+.B calc
+will execute them and exit.
+This flag will cause
+.B calc
+to drop into interactive mode after the
+commands are executed.
+.sp 1
+For example:
+.sp 1
+.in +5n
+.nf
+calc 2+5
+.fi
+.in -5n
+.sp 1
+will print the value 7 and exit whereas:
+.sp 1
+.in +5n
+.nf
+calc -i 2+5
+.fi
+.in -5n
+.sp 1
+will print the value 7 and prompt the user for more
+.B calc
+commands.
+
+.TP
+.BR \-m " mode"
+This flag sets the permission mode of
+.BR calc .
+It controls the ability for
+.B calc
+to open files and execute programs.
+Mode may be a number from 0 to 7.
+.sp 1
+The mode value is interpreted in a way similar to that
+of the
+.BR chmod (1)
+octal mode:
+.sp 1
+.in +5n
+.nf
+0  do not open any file, do not execute progs
+1  do not open any file
+2  do not open files for reading, do not execute progs
+3  do not open files for reading
+4  do not open files for writing, do not execute progs
+5  do not open files for writing
+6  do not execute any program
+7  allow everything (default mode)
+.fi
+.in -5n
+.sp 1
+If one wished to run
+.B calc
+from a privileged user, one might want to use
+.B \-m
+0 in an effort to make
+.B calc
+somewhat more secure.
+.sp 1
+Mode bits for reading and writing apply only on an
+open.
 Files already open are not effected.
-Thus if one wanted to use the \fI\-m 0\fP in an effort to make
-\fIcalc\fP more secure, but still wanted to read and write a specific
-file, one might want to do:
-.sp
-.in +0.5i
+Thus if one wanted to use the
+.B \-m
+0 in an effort to make
+.B calc
+somewhat more secure, but still wanted to read and write a specific
+file, one might want to do in
+.BR sh (1),
+.BR ksh (1),
+.BR bash (1)-like
+shells:
+.sp 1
+.in +5n
 .nf
-\fRcalc \-m 0 3<a.file\fP
+calc -m 0 3<a.file
 .fi
-.in -0.5i
-.sp
-Files presented to \fIcalc\fP in this way are opened in an unknown mode.
-\fICalc\fP will attempt to read or write them if directed.
-.sp
-If the \fImode\fP disables opening of files for reading, then
-the startup library scripts are disabled as of \fI\-q\fP was given.
-The reading of key bindings is also disabled when the \fImode\fP
-disables opening of files for reading.
+.in -5n
+.sp 1
+Files presented to
+.B calc
+in this way are opened in an
+unknown mode.
+.B Calc
+will attempt to read or write them if directed.
+.sp 1
+If the mode disables opening of files for reading, then
+the startup library scripts are disabled as of
+.B \-q
+was given.
+The reading of key bindings is also disabled
+when the mode disables opening of files for reading.
+
 .TP
-\fI \-p\fP
-Pipe processing is enabled by use of \-p.  For example:
-.sp
-.in +0.5i
+.B \-n
+Use the new configuration defaults instead of the old
+default classic defaults.
+This flag as the same effect
+as executing \fBconfig("all", "newcfg")\fP at startup time.
+
+.TP
+.B \-p
+Pipe processing is enabled by use of
+.BR \-p .
+For example:
+.sp 1
+.in +5n
 .nf
-\fRecho "print 2^21701\-1, 2^23209\-1" | calc \-p | fizzbin\fP
+calc -p '2^21701-1' | fizzbin
 .fi
-.in -0.5i
-.sp
-In pipe mode, \fIcalc\fP does not prompt, does not print leading tabs
-and does not print the initial header.
+.in -5n
+.sp 1
+In pipe mode,
+.B calc
+does not prompt, does not print leading
+tabs and does not print the initial header.
+The
+.B \-p
+flag overrides
+.BR \-i .
+
 .TP
-\fI \-q\fP
-Disable the use of the \fI$CALCRC\fP startup scripts.
+.B \-q
+Disable the use of the $CALCRC startup scripts.
+
 .TP
-\fI \-u\fP
+.B \-u
 Disable buffering of stdin and stdout.
+
 .TP
-\fI \-v\fP
-Print the version and exit.
+.B \-v
+Print the
+.B calc
+version number and exit.
 .PP
-Without \fIcalc_cmd\fPs, \fIcalc\fP operates interactively.
-If one or more \fIcalc_cmd\fPs are given on the command line,
-\fIcalc\fP will execute them and exit.
-The printing of leading tabs on output is disabled
-as if \fIconfig("tab",0)\fP had been executed.
+Without
+.IR calc_cmd ,
+.B calc
+operates interactively.
+If one or more
+.I calc_cmd
+are given on the command line,
+.B calc
+will execute them and exit.
+If
+.B \-i
+is given,
+.B calc
+will attempt to become interactive
+even of one or more
+.I calc_cmd
+are given on the command line.
 .PP
-Normally on startup, \fIcalc\fP attempts to execute a collection
-of library scripts.
-The environment variable \fI$CALCRC\fP (if non-existent then
-a compiled in value) contains a \fI:\fP separated list of
-startup library scripts.
-No error conditions are produced if these startup library scripts
-are not found.
+Normally on startup,
+.B calc
+attempts to execute a collection of
+library scripts.
+The environment variable $CALCRC (if non-existent
+then a compiled in value) contains a :  separated list of startup
+library scripts.
+No error conditions are produced if these startup
+library scripts are not found.
 .PP
-If the \fImode\fP disables opening of files for reading, then
-the startup library scripts are disabled as of \fI\-q\fP was given
-and \fI$CALCRC\fP as well as the default compiled in value are ignored.
+If the mode disables opening of files for reading, then the startup
+library scripts are disabled as of
+.B \-q
+was given and $CALCRC as well
+as the default compiled in value are ignored.
 .PP
 Filenames are subject to ``~'' expansion (see below).
-The environment variable \fI$CALCPATH\fP (if non-existent then
-a compiled in value) contains a \fI:\fP separated list of search
-directories.
-If a file does not begin with \fI/\fP, \fI~\fP or \fI./\fP,
-then it is searched for under each directory listed in the \fI$CALCPATH\fP.
-It is an error if no such readable file is found.
+The
+environment variable $CALCPATH (if non-existent then a compiled in
+value) contains a : separated list of search directories.
+If a
+file does not begin with /, ~ or ./, then it is searched for under
+each directory listed in the $CALCPATH.
+It is an error if no such
+readable file is found.
 .PP
-Calc treats all open files, other than stdin, stdout and stderr
-as files available for reading and writing.
-One may present calc with an already open file in the following way:
-.sp
-.in +0.5i
+.B Calc
+treats all open files, other than stdin, stdout and
+stderr as files available for reading and writing.
+One may
+present
+.B calc
+with an already open file using
+.BR sh (1),
+.BR ksh (1),
+.BR bash (1)-like
+shells is to:
+.sp 1
+.in +5n
+calc 3<open_file 4<open_file2
+.in -5n
+.sp 1
+For more information use the following
+.B calc
+commands:
+.sp 1
+.in +5n
 .nf
-\fRcalc 3<open_file 4<open_file2\fP
-.fi
-.in -0.5i
-.PP
-For more information use the following calc commands:
-.PP
-.in 1.0i
-help usage
-.br
 help help
-.br
+help overview
+help usage
 help environment
-.in -1.0i
-.PP
-OVERVIEW
-.PP
-\fICalc\fP is arbitrary precision arithmetic system that uses
-a C-like language.
-\fICalc\fP is useful as a calculator, an algorithm prototyped
-and as a mathematical research tool.
-More importantly, \fIcalc\fP provides one with a machine
-independent means of computation.
-.PP
-\fICalc\fP comes with a rich set of builtin mathematical
-and programmatic functions.
-.PP
-\fICalc\fP is distributed with library of scripts.
-Written in the same C-like language, library scripts may be
-read in and executed during a \fIcalc\fP session.
-These library scripts are also provided because they are
-useful and to serve as examples of the \fIcalc\fP language.
-One may further extend \fIcalc\fP thru the
-use of user defined scripts.
-.PP
-Internally calc represents numeric values as fractions reduced to their
-lowest terms.
-The numerators and denominators of these factions may grow to
-arbitrarily large values.
-Numeric values read in are automatically converted into rationals.
-The user need not be aware of this internal representation.
-.PP
-For more information use the following calc commands:
-.PP
-.in 1.0i
-help intro
-.br
-help builtin
-.br
-help stdlib
-.br
-help define
-.br
-show builtins
-.br
-show functions
-.in -1.0i
+help config
+.fi
+.in -5n
+.sp 1
 .PP
 DATA TYPES
 .PP
@@ -199,7 +365,9 @@ multiplication, division, negation, squaring, modulus,
 rounding, exponentiation, equality, comparison, printing
 and so on.
 .PP
-For more information use the following calc commands:
+For more information use the following
+.B calc
+commands:
 .PP
 .in 1.0i
 help types
@@ -220,7 +388,9 @@ procedure.
 Values may be grouped together in a matrix, or into a
 a list that permits stack and queue style operations.
 .PP
-For more information use the following calc commands:
+For more information use the following
+.B calc
+commands:
 .PP
 .in 1.0i
 help variable
@@ -256,7 +426,9 @@ For example:
 ~chongo/lib/fft_multiply.cal
 .in -1.0i
 .PP
-For more information use the following calc command:
+For more information use the following
+.B calc
+command:
 .PP
 .in 1.0i
 help file
@@ -275,7 +447,9 @@ These include commands such as function definition, help,
 reading in library scripts, dump files to a file, error notification,
 configuration control and status.
 .PP
-For more information use the following calc command:
+For more information use the following
+.B calc
+command:
 .PP
 .in 1.0i
 help command
@@ -295,7 +469,8 @@ help config
 .PD 0
 .TP 20
 ${LIBDIR}/*.cal
-library scripts shipped with calc
+library scripts shipped with
+.B calc
 .br
 .sp
 .TP 20
@@ -323,7 +498,9 @@ Default value: ${CALCPATH}
 .TP 5
 CALCRC
 On startup (unless \-h or \-q was given on the command
-line), calc searches for files along this :-separated
+line),
+.B calc
+searches for files along this :-separated
 environment variable.
 .br
 .sp
@@ -333,7 +510,9 @@ Default value: ${CALCRC}
 .TP 5
 CALCBINDINGS
 On startup (unless \fI\-h\fP or \fI\-q\fP was given on the command
-line, or \fI\-m\fP disallows opening files for reading), calc reads
+line, or \fI\-m\fP disallows opening files for reading),
+.B calc
+reads
 key bindings from the filename specified
 by this environment variable.
 .br
@@ -343,9 +522,12 @@ Default value: ${CALCBINDINGS}
 .SH CREDIT
 \&
 .br
-The majority of calc was written by David I. Bell.
+The majority of
+.B calc
+was written by David I. Bell.
 .sp
-Calc archives and calc-tester mailing list maintained by Landon Curt Noll.
+.B Calc
+archives and calc-tester mailing list maintained by Landon Curt Noll.
 .sp
 Thanks for suggestions and encouragement from Peter Miller,
 Neil Justusson, and Landon Noll.
@@ -378,30 +560,27 @@ Copyright (c) 19xx Ernest Bowen and Landon Curt Noll
 Permission is granted to use, distribute, or modify this source,
 provided that this copyright notice remains intact.
 .sp
-Send calc comments, suggestions, bug fixes, enhancements
-and interesting calc scripts that you would like you see included
+Send comments, suggestions, bug fixes, enhancements
+and interesting
+.B calc
+scripts that you would like you see included
 in future distributions to:
 .sp
 .in +0.5i
-dbell@auug.org.au
-.br
-chongo@toad.com
+calc-tester-request@postofc.corp.sgi.com
 .in -0.5i
 .sp
-Landon Noll maintains the official calc ftp archive at:
+Landon Noll maintains the the
+.B calc
+web site is located at:
 .sp
 .in +0.5i
-ftp://ftp.uu.net/pub/calc
+http://reality.sgi.com/chongo/tech/comp/calc
 .in -0.5i
 .sp
-Alpha test versions, complete with bugs, untested code and
-experimental features may be fetched (if you are brave) under:
-.sp
-.in +0.5i
-http://reality.sgi.com/chongo/calc/
-.in -0.5i
-.sp
-One may join the calc testing group by sending a request to:
+One may join the
+.B calc
+testing group by sending a request to:
 .sp
 .in +0.5i
 calc-tester-request@postofc.corp.sgi.com
@@ -410,14 +589,14 @@ calc-tester-request@postofc.corp.sgi.com
 Your message body (not the subject) should consist of:
 .sp
 .in +0.5i
+.nf
 subscribe calc-tester address
-.br
 end
-.br
 name your_full_name
+.fi
+.in -0.5i
 .sp
 where "address" is your EMail address and "your_full_name"
 is your full name.
-.in -0.5i
 .sp
-Enjoy!
+Share and Enjoy! :\-)

codegen.c

@@ -829,6 +829,8 @@ getstatement(LABEL *contlabel, LABEL *breaklabel, LABEL *nextcaselabel, LABEL *d
 		printeol = TRUE;
 		for (;;) {
 			switch (gettoken()) {
+				case T_RIGHTPAREN:
+				case T_RIGHTBRACKET:
 				case T_RIGHTBRACE:
 				case T_NEWLINE:
 				case T_EOF:

func.c

@@ -72,6 +72,7 @@ static int strscan(char *s, int count, VALUE **vals);
 static int filescan(FILEID id, int count, VALUE **vals);
 static VALUE f_eval(VALUE *vp);
 static VALUE f_fsize(VALUE *vp);
+static int malloced_putenv(char *str);
 
 
 
@@ -84,6 +85,21 @@ extern void matrandperm(MATRIX *M);
 extern void listrandperm(LIST *lp);
 extern int idungetc(FILEID id, int ch);
 
+extern int stoponerror;
+
+
+/*
+ * malloced environment storage
+ */
+#define ENV_POOL_CHUNK 10	/* env_pool elements to allocate at a time */
+struct env_pool {
+    char *getenv;	/* what getenv() would return, NULL => unused */
+    char *putenv;	/* pointer given to putenv() */
+};
+static int env_pool_cnt = 0;	/* number of env_pool elements in use */
+static int env_pool_max = 0;	/* number of env_pool elements allocated */
+static struct env_pool *e_pool = NULL;	/* env_pool elements */
+
 
 /*
  * if HZ & CLK_TCK are not defined, pick typical values, hope for the best
@@ -4476,6 +4492,30 @@ f_errmax(int count, VALUE **vals)
 }
 
 
+static VALUE
+f_stoponerror(int count, VALUE **vals)
+{
+	int oldval;
+	VALUE *vp;
+	VALUE result;
+
+	oldval = stoponerror;
+	if (count > 0) {
+		vp = vals[0];
+
+		if (vp->v_type != V_NUM || qisfrac(vp->v_num) ||
+				zge31b(vp->v_num->num))
+			fprintf(stderr,
+				 "Out-of-range arg for stoponerror ignored\n");
+		else
+			stoponerror = (int) ztoi(vp->v_num->num);
+	}
+
+	result.v_type = V_NUM;
+	result.v_num = itoq((long) oldval);
+	return result;
+}
+
 static VALUE
 f_fclose(int count, VALUE **vals)
 {
@@ -5951,8 +5991,7 @@ f_putenv(int count, VALUE **vals)
 
 	/* return putenv result */
 	result.v_type = V_NUM;
-	result.v_num = itoq((long) putenv(putenv_str));
-	free(putenv_str);
+	result.v_num = itoq((long) malloced_putenv(putenv_str));
 	return result;
 }
 
@@ -7206,6 +7245,8 @@ static CONST struct builtin builtins[] = {
 	 "seed the random() function"},
 	{"ssq", 1, IN, 0, OP_NOP, 0, f_ssq,
 	 "sum of squares of values"},
+	{"stoponerror", 0, 1, 0, OP_NOP, 0, f_stoponerror,
+	 "assign value to stoponerror flag"},
 	{"str", 1, 1, 0, OP_NOP, 0, f_str,
 	 "simple value converted to string"},
 	{"strcat", 1,IN, 0, OP_NOP, 0, f_strcat,
@@ -7494,4 +7535,145 @@ showerrors(void)
 }
 
 
+/*
+ * malloced_putenv - Keep track of malloced environment variable storage
+ *
+ * given:
+ *	str	a malloced string which will be given to putenv
+ *
+ * returns:
+ *	putenv() return value
+ *
+ * NOTE: The caller MUST pass a string that the caller has previously malloced.
+ */
+static int
+malloced_putenv(char *str)
+{
+	char *value;	/* location of the value part of the str argument */
+	char *old_val;	/* previously stored (or inherited) env value */
+	int found_cnt;	/* number of active env_pool entries found */
+	struct env_pool *new;	/* new e_pool */
+	int i;
+
+	/*
+	 * firewall
+	 */
+	if (str == NULL) {
+		math_error("malloced_putenv given a NULL pointer!!");
+		/*NOTREACHED*/
+	}
+	if (str[0] == '=') {
+		math_error("malloced_putenv = is first character in string!!");
+		/*NOTREACHED*/
+	}
+
+	/*
+	 * determine the place where getenv would return
+	 */
+	value = strchr(str, '=');
+	if (value == NULL) {
+		math_error("malloced_putenv = not found in string!!");
+		/*NOTREACHED*/
+	}
+	++value;
+
+	/*
+	 * lookup for an existing environment value
+	 */
+	*(value-1) = '\0';
+	old_val = getenv(str);
+	*(value-1) = '=';
+
+	/*
+	 * If we have the value in our environment, look for a
+	 * previously malloced string and free it
+	 */
+	if (old_val != NULL && env_pool_cnt > 0) {
+		for (i=0, found_cnt=0;
+		     i < env_pool_max && found_cnt < env_pool_cnt;
+		     ++i) {
+
+			/* skip an unused entry */
+			if (e_pool[i].getenv == NULL) {
+			    continue;
+			}
+			++found_cnt;
+
+			/* look for the 1st match */
+			if (e_pool[i].getenv == value) {
+
+				/* found match, free the storage */
+				if (e_pool[i].putenv != NULL) {
+					free(e_pool[i].putenv);
+				}
+				e_pool[i].getenv = NULL;
+				--env_pool_cnt;
+				break;
+			}
+		}
+	}
+
+	/*
+	 * ensure that we have room in the e_pool
+	 */
+	if (env_pool_max == 0) {
+
+		/* allocate an initial pool (with one extra guard value) */
+		new = (struct env_pool *)malloc((ENV_POOL_CHUNK+1) *
+						sizeof(struct env_pool));
+		if (new == NULL) {
+			math_error("malloced_putenv malloc failed");
+			/*NOTREACHED*/
+		}
+		e_pool = new;
+		env_pool_max = ENV_POOL_CHUNK;
+		for (i=0; i <= ENV_POOL_CHUNK; ++i) {
+			e_pool[i].getenv = NULL;
+		}
+
+	} else if (env_pool_cnt >= env_pool_max) {
+
+		/* expand the current pool (with one extra guard value) */
+		new = (struct env_pool *)realloc(e_pool,
+					     (env_pool_max+ENV_POOL_CHUNK+1) *
+					     sizeof(struct env_pool));
+		if (new == NULL) {
+			math_error("malloced_putenv realloc failed");
+			/*NOTREACHED*/
+		}
+		e_pool = new;
+		for (i=env_pool_max; i <= env_pool_max + ENV_POOL_CHUNK; ++i) {
+			e_pool[i].getenv = NULL;
+		}
+		env_pool_max += ENV_POOL_CHUNK;
+	}
+
+	/*
+	 * store our data into the first e_pool entry
+	 */
+	for (i=0; i < env_pool_max; ++i) {
+
+		/* skip used entries */
+		if (e_pool[i].getenv != NULL) {
+			continue;
+		}
+
+		/* store in this free entry and stop looping */
+		e_pool[i].getenv = value;
+		e_pool[i].putenv = str;
+		++env_pool_cnt;
+		break;
+	}
+	if (i >= env_pool_max) {
+		math_error("malloced_putenv missed unused entry!!");
+		/*NOTREACHED*/
+	}
+
+	/*
+	 * finally, do the putenv action
+	 */
+	return putenv(str);
+}
+
+
 #endif /* FUNCLIST */

help/archive

@@ -7,7 +7,7 @@ Where to get the the latest versions of calc
     Alpha test versions, complete with bugs, untested code and
     experimental features may be fetched (if you are brave) under:
 
-	http://reality.sgi.com/chongo/calc/
+	http://reality.sgi.com/chongo/tech/comp/calc/
 
     One may join the calc testing group by sending a request to:
 
@@ -22,10 +22,4 @@ Where to get the the latest versions of calc
     where "address" is your EMail address and "your_full_name"
     is your full name.
 
-    See:
-
-	http://prime.corp.sgi.com/csp/ioccc/noll/noll.html#calc
-
-    for details.
-
 Landon Curt Noll <chongo@toad.com> /\oo/\

help/contrib

@@ -8,7 +8,7 @@ We welcome and encourage you to send us:
 Prior to doing so, you should consider trying your changes on the most
 recent alpha test code.  To obtain the most recent code, look under
 
-	http://reality.sgi.com/chongo/calc/
+	http://reality.sgi.com/chongo/tech/comp/calc/
 
 You should also consider joining the calc testing group by sending a
 request to:

help/credit

@@ -44,7 +44,7 @@ Credits
     Alpha test versions, complete with bugs, untested code and
     experimental features may be fetched (if you are brave) under:
 
-	http://reality.sgi.com/chongo/calc/
+	http://reality.sgi.com/chongo/tech/comp/calc/
 
     One may join the calc testing group by sending a request to:
 

help/usage

@@ -2,7 +2,22 @@ Calc command line
 
     Calc has the following command line:
 
-	calc [-C] [-e] [-h] [-i] [-m mode] [-n] [-p] [-q] [-u] [calc_cmd ...]
+	calc [-c] [-C] [-d] [-e] [-h] [-i] [-m mode]
+	     [-n] [-p] [-q] [-u] [-v] [calc_cmd ...]
+
+	-c  Continue reading command lines even after an execution
+	    error has caused the abandonment of a line.
+
+	    For example:
+
+		calc read many_errors.cal
+
+	    will cause calc to abort on the first error, whereas:
+
+		calc -c read many_errors.cal
+
+	    will cause calc to try to process each line being read
+	    despite the errors that it encounters.
 
 	-C  Permit the execution of custom builtin functions.  Without
 	    this flag, calling the custom() builtin function will
@@ -12,6 +27,27 @@ Calc command line
 	    are non-standard and that are not portable.  Custom builtin
 	    functions are disabled by default for this reason.
 
+	-d  Disable the printing of the opening title.  The printing
+	    of library debug and informational messages is also disabled
+	    as if config("lib_debug",0) had been executed.
+
+	    For example:
+
+		calc 'read qtime; qtime(2)'
+
+	    will output something like:
+
+		qtime(utc_hr_offset) defined
+		It's nearly ten past six.
+
+	    whereas:
+
+		calc -d 'read qtime; qtime(2)'
+
+	    will just say:
+
+		It's nearly ten past six.
+
 	-e  Ignore any environment variables on startup.  The
 	    getenv() builtin will still return values, however.
 
@@ -19,7 +55,21 @@ Calc command line
 	    is equivalent to the calc command help help.  The help
 	    facility is disabled unless the mode is 5 or 7.  See -m.
 
-	-i  Do not about if the error count exceeds maxerr().
+	-i  Become interactive if possible.  Be default, if calc_cmd
+	    args are given, calc will execute them and exit.  This flag
+	    will cause calc to drop into interactive mode after the
+	    commands are executed.
+
+	    For example:
+
+		calc 2+5
+
+	    will print the value 7 and exit whereas:
+
+		calc -i 2+5
+
+	    will print the value 7 and prompt the user for more
+	    calc commands.
 
 	-m mode
 	   This flag sets the permission mode of calc.  It
@@ -38,7 +88,7 @@ Calc command line
 		6  do not execute any program
 		7  allow everything (default mode)
 
-	   If one wished to run calc from a privledged user, one
+	   If one wished to run calc from a privileged user, one
 	   might want to use -m 0 in an effort to make calc more
 	   secure.
 
@@ -46,7 +96,7 @@ Calc command line
 	   open.  Files already open are not effected. Thus if one
 	   wanted to use the -m 0 in an effort to make calc more
 	   secure, but still wanted to read and write a specific
-	   file, one might want to do:
+	   file, one might want to do in sh, ksh, bash-like shells:
 
 		     calc -m 0 3<a.file
 
@@ -59,25 +109,28 @@ Calc command line
 	   given.  The reading of key bindings is also disabled
 	   when the mode disables opening of files for reading.
 
-	-n  Use the new configutation defaults instead of the old
+	-n  Use the new configuration defaults instead of the old
 	    default classic defaults.  This flag as the same effect
 	    as executing config("all", "newcfg") at startup time.
 
 	-p  Pipe processing is enabled by use of -p.  For example:
 
-		     echo "print 2^21701-1, 2^23209-1" | calc -p | fizzbin
+		     calc -p '2^21701-1' | fizzbin
 
-	    In pipe mode, calc does not prompt, does not print
-	    leading tabs and does not print the initial header.
+	    In pipe mode, calc does not prompt, does not print leading
+	    tabs and does not print the initial header.  The -p flag
+	    overrides -i.
 
 	-q  Disable the use of the $CALCRC startup scripts.
 
 	-u  Disable buffering of stdin and stdout.
 
+	-v  Print calc version number and exit.
+
     Without `calc_cmd', calc operates interactively.  If one or more
     `calc_cmd' are given on the command line, calc will execute them and
-    exit.  The printing of leading tabs on output is disabled as if
-    config("tab",0) had been executed.
+    exit.  If -i is given, calc will attempt to become interactive
+    even of one or more `calc_cmd' are given on the command line.
 
     Normally on startup, calc attempts to execute a collection of
     library scripts.  The environment variable $CALCRC (if non-existent
@@ -98,7 +151,8 @@ Calc command line
 
     Calc treats all open files, other than stdin, stdout and
     stderr as files available for reading and writing. One may
-    present calc with an already open file in the following way:
+    present calc with an already open file using sh, ksh or bash-like
+    shells is to:
 
         calc 3<open_file 4<open_file2
 

input.c

@@ -311,7 +311,7 @@ f_open(char *name, char *mode)
 	 */
 	if (!allow_read && !allow_write) {
 		/* no reads and no writes means no opens! */
-		if (start_done) {
+		if (run_state > RUN_PRE_BEGIN) {
 			fprintf(stderr,
 				"open of %s mode %s - %s\n", name, mode,
 				"open for read or write disallowed by -m\n");
@@ -319,7 +319,7 @@ f_open(char *name, char *mode)
 		return NULL;
 	} else if (!allow_read && strchr(mode, 'r') != NULL) {
 		/* reading new files disallowed */
-		if (start_done) {
+		if (run_state > RUN_PRE_BEGIN) {
 			fprintf(stderr,
 				"open of %s mode %s - %s\n", name, mode,
 				"open for read disallowed by -m\n");
@@ -330,7 +330,7 @@ f_open(char *name, char *mode)
 		    strchr(mode, 'a') != NULL ||
 		    strchr(mode, '+') != NULL)) {
 		/* writing new files disallowed */
-		if (start_done) {
+		if (run_state > RUN_PRE_BEGIN) {
 			fprintf(stderr,
 				"open of %s mode %s - %s\n", name, mode,
 				"open for write disallowed by -m\n");

lib/regress.cal

@@ -4223,7 +4223,7 @@ define test_random()
 
 	/* test range interface some more */
 	tmp = srandom(state1);
-	print				  '5369: tmp = srandom(0)';
+	print				  '5369: tmp = srandom(state1)';
 	vrfy(random(-46,46) == -0x7,	  '5370: random(-46,46) == -0x7');
 	vrfy(random(21701,23209) == 23061,
 		'5371: random(21701,23209) == 23061');

lib_calc.c

@@ -63,8 +63,8 @@ int new_std = FALSE;	/* TRUE (-n) => use newstd configuration */
 int abortlevel;		/* current level of aborts */
 BOOL inputwait;		/* TRUE if in a terminal input wait */
 jmp_buf jmpbuf;		/* for errors */
-int start_done = FALSE;	/* TRUE => start up processing finished */
-char *program = "calc";	/* our name */
+run run_state = RUN_UNKNOWN;	/* calc startup and run state */
+char *program = "calc";		/* our name */
 char cmdbuf[MAXCMD+1+1+1];	/* command line expression + "\n\0" + guard */
 
 
@@ -83,7 +83,8 @@ int p_flag = FALSE;	/* TRUE => pipe mode */
 int q_flag = FALSE;	/* TRUE => don't execute rc files */
 int u_flag = FALSE;	/* TRUE => unbuffer stdin and stdout */
 int d_flag = FALSE;	/* TRUE => disable heading, lib_debug == 0 */
-
+int c_flag = FALSE;	/* TRUE => continue on error if permitted */
+int i_flag = FALSE;	/* TRUE => go interactive if permitted */
 
 /*
  * global values
@@ -95,8 +96,9 @@ char *home;		/* $HOME or default */
 char *pager;		/* $PAGER or default */
 char *shell;		/* $SHELL or default */
 int stdin_tty = FALSE;	/* TRUE if stdin is a tty */
-int interactive = FALSE; /* TRUE if interactive session (no cmd args) */
-int post_init = FALSE;	/* TRUE setjmp for math_error is readready */
+int havecommands = FALSE;	/* TRUE if have one or more cmd args */
+int stoponerror = FALSE;	/* >0 => stop, <0 => continue on error */
+int post_init = FALSE;	/* TRUE setjmp for math_error is ready */
 
 int no_env = FALSE;	/* TRUE (-e) => ignore env vars on startup */
 int errmax = ERRMAX;	/* if >= 0,  maximum value for errcount */
@@ -163,6 +165,13 @@ libcalc_call_me_first(void)
 		conf->lib_debug = 0;
 	}
 
+	/*
+	 * -p turns off tab
+	 */
+	if (p_flag) {
+		conf->tab_ok = 0;
+	}
+
 	/*
 	 * initialize
 	 */
@@ -171,6 +180,7 @@ libcalc_call_me_first(void)
 	/*
 	 * ready to rock & roll ..
 	 */
+	run_state = RUN_PRE_BEGIN;
 	init_done = 1;
 	return;
 }

sample/Makefile

@@ -208,11 +208,6 @@ CALC_LIBS= ../libcalc.a ../custom/libcustcalc.a
 
 ###
 #
-# Normally, the upper level makefile will set these values.  We provide
-# a default here just in case you want to build from this directory.
-#
-# Select your compiler type by commenting out one of the cc sets below:
-#
 # CCOPT are flags given to ${CC} for optimization
 # CCWARN are flags given to ${CC} for warning message control
 # CCMISC are misc flags given to ${CC}
@@ -220,32 +215,36 @@ CALC_LIBS= ../libcalc.a ../custom/libcustcalc.a
 # CFLAGS are all flags given to ${CC} [[often includes CCOPT, CCWARN, CCMISC]]
 # ICFLAGS are given to ${CC} for intermediate progs
 #
-# CCMAIN are flags for ${CC} when files with main() instead of CFLAGS
-#
 # LCFLAGS are CC-style flags for ${LINT}
 # LDFLAGS are flags given to ${CC} for linking .o files
 # ILDFLAGS are flags given to ${CC} for linking .o files for intermediate progs
 #
-# CC is how the the C compiler is invoked
+# LCC how the the C compiler is invoked on locally executed intermediate progs
+# CC is how the the C compiler is invoked (with an optional Purify)
 #
 ###
 #
-# common cc set
+# default set
 #
-CCWARN=
+# Normally these values are passed in from the upper level Makefile.
+# Change these as needed if you intend to build directly in this directory.
+#
+# for better performance, set the following above:
+#     DEBUG= -O2
+#
+CCWARN= -Wall -Wno-implicit -Wno-comment
 CCOPT= ${DEBUG} ${NO_SHARED}
 CCMISC=
 #
-CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC} ${ALLOW_CUSTOM}
+CFLAGS= ${CCWARN} ${CCOPT} ${CCMISC}
 ICFLAGS= ${CCWARN} ${CCMISC}
 #
-CCMAIN= ${ICFLAGS}
-#
 LCFLAGS=
 LDFLAGS= ${NO_SHARED} ${LD_NO_SHARED}
 ILDFLAGS=
 #
-CC= ${PURIFY} cc
+LCC= gcc
+CC= ${PURIFY} ${LCC}
 
 ##############################################################################
 #-=-=-=-=-=-=-=-=- Be careful if you change something below -=-=-=-=-=-=-=-=-#
@@ -286,13 +285,13 @@ SORT= sort
 all: ${TARGETS} .all
 
 test_random.o: test_random.c
-	${CC} ${CCMAIN} ${CCOPT} ${ALLOW_CUSTOM} test_random.c -c
+	${CC} ${CFLAGS} ${ALLOW_CUSTOM} test_random.c -c
 
 test_random: test_random.o ../libcalc.a
 	${CC} ${LDFLAGS} test_random.o ${CALC_LIBS} ${LD_DEBUG} -o test_random
 
 many_random.o: many_random.c
-	${CC} ${CCMAIN} ${CCOPT} ${ALLOW_CUSTOM} many_random.c -c
+	${CC} ${CFLAGS} ${ALLOW_CUSTOM} many_random.c -c
 
 many_random: many_random.o ../libcalc.a
 	${CC} ${LDFLAGS} many_random.o ${CALC_LIBS} ${LD_DEBUG} -o many_random

seed.c

@@ -52,7 +52,9 @@
 #include <sys/stat.h>
 #include <sys/resource.h>
 #include <setjmp.h>
+#if !defined(__bsdi)
 #include <ustat.h>
+#endif /* __bsdi */
 #if defined(__linux)
 # include <fcntl.h>
 # define DEV_URANDOM "/dev/urandom"
@@ -214,8 +216,6 @@ pseudo_seed(void)
 	char urandom_pool[DEV_URANDOM_POOL];	/* /dev/urandom data pool */
 #endif /* __linux */
 	struct timeval tp;              /* time of day */
-	pid_t getsid;                   /* session ID */
-	pid_t getpgid;                  /* process group ID */
 	pid_t getpid;                   /* process ID */
 	pid_t getppid;                  /* parent process ID */
 	uid_t getuid;                   /* real user ID */
@@ -229,6 +229,7 @@ pseudo_seed(void)
 	struct stat fstat_stdin;        /* stat of stdin */
 	struct stat fstat_stdout;       /* stat of stdout */
 	struct stat fstat_stderr;       /* stat of stderr */
+#if !defined(__bsdi)
 	struct ustat ustat_dot;         /* usage stat of "." */
 	struct ustat ustat_dotdot;      /* usage stat of ".." */
 	struct ustat ustat_tmp;         /* usage stat of "/tmp" */
@@ -236,6 +237,9 @@ pseudo_seed(void)
 	struct ustat ustat_stdin;       /* usage stat of stdin */
 	struct ustat ustat_stdout;      /* usage stat of stdout */
 	struct ustat ustat_stderr;      /* usage stat of stderr */
+	pid_t getsid;                   /* session ID */
+	pid_t getpgid;                  /* process group ID */
+#endif /* __bsdi */
 	struct rusage rusage;           /* resource utilization */
 	struct rusage rusage_chld;      /* resource utilization of children */
 	struct timeval tp2;             /* time of day again */
@@ -271,8 +275,6 @@ pseudo_seed(void)
     }
 #endif /* __linux */
     (void) gettimeofday(&sdata.tp, NULL);
-    sdata.getsid = getsid((pid_t)0);
-    sdata.getpgid = getpgid((pid_t)0);
     sdata.getpid = getpid();
     sdata.getppid = getppid();
     sdata.getuid = getuid();
@@ -286,6 +288,7 @@ pseudo_seed(void)
     (void) fstat(0, &sdata.fstat_stdin);
     (void) fstat(1, &sdata.fstat_stdout);
     (void) fstat(2, &sdata.fstat_stderr);
+#if !defined(__bsdi)
     (void) ustat(sdata.stat_dotdot.st_dev, &sdata.ustat_dotdot);
     (void) ustat(sdata.stat_dot.st_dev, &sdata.ustat_dot);
     (void) ustat(sdata.stat_tmp.st_dev, &sdata.ustat_tmp);
@@ -293,6 +296,9 @@ pseudo_seed(void)
     (void) ustat(sdata.fstat_stdin.st_dev, &sdata.ustat_stdin);
     (void) ustat(sdata.fstat_stdout.st_dev, &sdata.ustat_stdout);
     (void) ustat(sdata.fstat_stderr.st_dev, &sdata.ustat_stderr);
+    sdata.getsid = getsid((pid_t)0);
+    sdata.getpgid = getpgid((pid_t)0);
+#endif /* __bsdi */
     (void) getrusage(RUSAGE_SELF, &sdata.rusage);
     (void) getrusage(RUSAGE_CHILDREN, &sdata.rusage_chld);
     (void) gettimeofday(&sdata.tp2, NULL);

string.c

@@ -1142,7 +1142,7 @@ initstrings(void)
 
 /*
  * addstring is called only from token.c
- * When called, len is length if string including '\0'
+ * When called, len is length of string including '\0'
  */
 long
 addstring(char *str, long len)

token.c

@@ -458,6 +458,7 @@ eatstring(int quotechar)
 		}
 		memcpy(str + totlen, buf, len);
 		totlen += len;
+		len = 0;
 	    }
 	}
   	curtoken.t_strindex = addstring(str, totlen + len);
@@ -643,6 +644,10 @@ scanerror(int skip, char *fmt, ...)
 	va_end(ap);
 	fprintf(stderr, "%s\n", buf);
 
+	/* bail out if continuation not permitted */
+	if ((!c_flag && !stoponerror) || stoponerror > 0)
+		longjmp(jmpbuf, 1);
+
 	/* bail out if too many errors */
 	if (conf->maxscancount > 0 && errorcount > conf->maxscancount) {
 		fputs("Too many scan errors, compilation aborted.\n", stderr);

version.c

@@ -12,7 +12,7 @@
 #define MAJOR_VER	2	/* major version */
 #define MINOR_VER	11	/* minor version */
 #define MAJOR_PATCH	0	/* patch level or 0 if no patch */
-#define MINOR_PATCH	"7"	/* test number or empty string if no patch */
+#define MINOR_PATCH	"7.5"	/* test number or empty string if no patch */
 
 /*
  * calc version constants
@@ -80,7 +80,3 @@ version(void)
 	 */
 	return stored_version;
 }
-
-
-
-/* END CODE */

zrandom.c

@@ -1571,6 +1571,12 @@ static RANDOM random_pregen[BLUM_PREGEN] = {
 };
 
 
+/*
+ * forward static declarations
+ */
+static void zfree_random(ZVALUE z);
+
+
 /*
  * zsrandom1 - seed the Blum generator 1 arg style
  *
@@ -1647,7 +1653,7 @@ zsrandom1(CONST ZVALUE seed, BOOL need_ret)
 		do {
 			/* free temp storage */
 			if (last_r.v != NULL) {
-				zfree(last_r);
+				zfree_random(last_r);
 			}
 
 			/*
@@ -1657,10 +1663,10 @@ zsrandom1(CONST ZVALUE seed, BOOL need_ret)
 			last_r = r;
 			zsquaremod(last_r, blum.n, &r);
 		} while (zrel(r, last_r) > 0);
-		zfree(blum.r);
+		zfree_random(blum.r);
 		blum.r = r;
 		/* free temp storage */
-		zfree(last_r);
+		zfree_random(last_r);
 
 	/*
 	 * reserved seed
@@ -1741,7 +1747,7 @@ zsrandom2(CONST ZVALUE seed, CONST ZVALUE newn)
 			math_error("srandom small newn must be [1,20]");
 			/*NOTREACHED*/
 		}
-		zfree(blum.n);
+		zfree_random(blum.n);
 		zcopy(random_pregen[set-1].n, &blum.n);
 		blum.loglogn = random_pregen[set-1].loglogn;
 		blum.mask = random_pregen[set-1].mask;
@@ -1750,7 +1756,7 @@ zsrandom2(CONST ZVALUE seed, CONST ZVALUE newn)
 		 * reset initial seed as well if seed is 0
 		 */
 		if (ziszero(seed)) {
-			zfree(blum.r);
+			zfree_random(blum.r);
 			zcopy(random_pregen[set-1].r, &blum.r);
 
 		/*
@@ -1785,7 +1791,7 @@ zsrandom2(CONST ZVALUE seed, CONST ZVALUE newn)
 		 * of two primes.
 		 */
 		/* load modulus */
-		zfree(blum.n);
+		zfree_random(blum.n);
 		zcopy(newn, &blum.n);
 
 		/*
@@ -1894,11 +1900,11 @@ zsrandom4(CONST ZVALUE seed, CONST ZVALUE ip, CONST ZVALUE iq, long trials)
 	/*
 	 * form the Blum modulus
 	 */
-	zfree(blum.n);
+	zfree_random(blum.n);
 	zmul(p, q, &blum.n);
 	/* free temp storage */
-	zfree(p);
-	zfree(q);
+	zfree_random(p);
+	zfree_random(q);
 
 	/*
 	 * form the loglogn and mask
@@ -2045,7 +2051,7 @@ zrandomskip(long cnt)
 
 		/* turn the Blum-Blum-Shub crank */
 		zsquaremod(blum.r, blum.n, &new_r);
-		zfree(blum.r);
+		zfree_random(blum.r);
 		blum.r = new_r;
 		cnt -= blum.loglogn;
 	}
@@ -2057,7 +2063,7 @@ zrandomskip(long cnt)
 
 		/* turn the Blum-Blum-Shub crank */
 		zsquaremod(blum.r, blum.n, &new_r);
-		zfree(blum.r);
+		zfree_random(blum.r);
 		blum.r = new_r;
 
 		/* fill the buffer with the unused bits */
@@ -2197,7 +2203,7 @@ zrandom(long cnt, ZVALUE *res)
 		 * turn the Blum-Blum-Shub crank
 		 */
 		zsquaremod(blum.r, blum.n, &new_r);
-		zfree(blum.r);
+		zfree_random(blum.r);
 		blum.r = new_r;
 		/* peal off the bottom loglogn bits */
 		blum.buffer = (blum.r.v[0] & mask);
@@ -2228,7 +2234,7 @@ zrandom(long cnt, ZVALUE *res)
 	 */
 	/* turn the Blum-Blum-Shub crank */
 	zsquaremod(blum.r, blum.n, &new_r);
-	zfree(blum.r);
+	zfree_random(blum.r);
 	blum.r = new_r;
 	/* peal off the bottom loglogn bits */
 	blum.buffer = (blum.r.v[0] & mask);
@@ -2282,13 +2288,13 @@ zrandomrange(CONST ZVALUE low, CONST ZVALUE high, ZVALUE *res)
 	 */
 	zsub(high, low, &range);
 	if (zisone(range)) {
-		zfree(range);
+		zfree_random(range);
 		*res = low;
 		return;
 	}
 	zsub(range, _one_, &rangem1);
 	bitlen = 1+zhighbit(rangem1);
-	zfree(rangem1);
+	zfree_random(rangem1);
 
 	/*
 	 * generate a random value between [0, diff)
@@ -2302,7 +2308,7 @@ zrandomrange(CONST ZVALUE low, CONST ZVALUE high, ZVALUE *res)
 	rval.v = NULL;
 	do {
 		if (rval.v != NULL) {
-			zfree(rval);
+			zfree_random(rval);
 		}
 		zrandom(bitlen, &rval);
 	} while (zrel(rval, range) >= 0);
@@ -2312,8 +2318,8 @@ zrandomrange(CONST ZVALUE low, CONST ZVALUE high, ZVALUE *res)
 	 * which is the range [low, high)
 	 */
 	zadd(rval, low, res);
-	zfree(rval);
-	zfree(range);
+	zfree_random(rval);
+	zfree_random(range);
 }
 
 
@@ -2341,8 +2347,8 @@ irandom(long s)
 	itoz(s, &z1);
 	zrandomrange(_zero_, z1, &z2);
 	res = ztoi(z2);
-	zfree(z1);
-	zfree(z2);
+	zfree_random(z1);
+	zfree_random(z2);
 	return res;
 }
 
@@ -2377,12 +2383,20 @@ randomcopy(CONST RANDOM *state)
 	if (state->r.v == NULL) {
 		ret->r.v = NULL;
 	} else {
-		zcopy(state->r, &ret->r);
+		if (state->r.v == h_rdefvec) {
+			ret->r.v = state->r.v;
+		} else {
+			zcopy(state->r, &ret->r);
+		}
 	}
 	if (state->n.v == NULL) {
 		ret->n.v = NULL;
 	} else {
-		zcopy(state->n, &ret->n);
+		if (state->n.v == h_ndefvec) {
+			ret->n.v = state->n.v;
+		} else {
+			zcopy(state->n, &ret->n);
+		}
 	}
 
 	/*
@@ -2414,12 +2428,8 @@ randomfree(RANDOM *state)
 	}
 
 	/* free the values */
-	if (state->n.v != h_ndefvec) {
-		zfree(state->n);
-	}
-	if (state->r.v != h_rdefvec) {
-		zfree(state->r);
-	}
+	zfree_random(state->n);
+	zfree_random(state->r);
 
 	/* free it if it is not pre-defined */
 	state->seeded = 0;
@@ -2505,9 +2515,43 @@ randomprint(CONST RANDOM *state, int flags)
 void
 random_libcalc_cleanup(void)
 {
-	/* free if we are seeded now */
-	if (blum.seeded) {
-		randomfree(&blum);
+	/* free our state - let zfree_random protect the default state */
+	randomfree(&blum);
+	return;
+}
+
+
+/*
+ * zfree_random - perform a zfree if we are not trying to free static data
+ *
+ * given:
+ *	z	the ZVALUE to zfree(z) if not pointing to static data
+ */
+static void
+zfree_random(ZVALUE z)
+{
+	if (z.v != h_ndefvec && z.v != h_rdefvec && z.v != h_rdefvec_2 &&
+	    z.v != h_nvec01 && z.v != h_rvec01 &&
+	    z.v != h_nvec02 && z.v != h_rvec02 &&
+	    z.v != h_nvec03 && z.v != h_rvec03 &&
+	    z.v != h_nvec04 && z.v != h_rvec04 &&
+	    z.v != h_nvec05 && z.v != h_rvec05 &&
+	    z.v != h_nvec06 && z.v != h_rvec06 &&
+	    z.v != h_nvec07 && z.v != h_rvec07 &&
+	    z.v != h_nvec08 && z.v != h_rvec08 &&
+	    z.v != h_nvec09 && z.v != h_rvec09 &&
+	    z.v != h_nvec10 && z.v != h_rvec10 &&
+	    z.v != h_nvec11 && z.v != h_rvec11 &&
+	    z.v != h_nvec12 && z.v != h_rvec12 &&
+	    z.v != h_nvec13 && z.v != h_rvec13 &&
+	    z.v != h_nvec14 && z.v != h_rvec14 &&
+	    z.v != h_nvec15 && z.v != h_rvec15 &&
+	    z.v != h_nvec16 && z.v != h_rvec16 &&
+	    z.v != h_nvec17 && z.v != h_rvec17 &&
+	    z.v != h_nvec18 && z.v != h_rvec18 &&
+	    z.v != h_nvec19 && z.v != h_rvec19 &&
+	    z.v != h_nvec20 && z.v != h_rvec20) {
+		zfree(z);
 	}
 	return;
 }