Added swap_HALFs(dest, src, len) function to byteswap.c.
Calc can now handle Big Engian file position sizes that are a
multiple of BASEB bits in length. Before handle Big Engian file
positions could only be 32 and 64 bits in length. This will allow,
for example, a Big Engian file position size of 128 (assuming that
128/BASEB is is an integer).
Restored use of the #define FPOS_POS_LEN symbol. This refers to the
length of the __pos element (if the __pos element exists), the fpos_t type
(if that type exists).
Changed SWAP_HALF_IN_FILEPOS(dest, src) mato to use FILEPOS_LEN Little
Endian when FILEPOS is a simple scalar type (i.e., HAVE_FILEPOS_SCALAR
is defined).
Changed #define HAVE_FPOS to HAVE_FGETSETPOS.
Corrected comment in have_fpos_pos.h. The HAVE_FPOS_POS symbol was NOT
related to fgetpos & fsetpos but rather if we we have an __pos element
in FILEPOS.
Changed #define HAVE_NO_FPOS to HAVE_NO_FGETSETPOS.
Improved comments in have_fpos_pos.h to show why and how HAVE_FPOS_POS,
FPOS_POS_BITS, and FPOS_POS_LEN were defined or undefed.
Changed showfiles builtin to print sizes cast to (long int) with the
"%ld" printf format to avoid implementations that do not support the
"%lld" printf format specifier.
Added full_debug rule to Makefile. This does the work of the
old debug rule in a more verbose mode by using Q= H=@ S= E= V=@.
The debug rule in the Makefile now pre-removes debug.out and then
runs make full_debug sending stdout and stderr to debug.out. It then
prints a few instructions about filing a GitHub issue bug report.
The following are the changes in this release:
Added a few remarks on calc version numbers to version.c.
Fixed how fposval.h is built. On a number of systems, the fposval.c
file failed to compile incorrectly. This caused problems for systems in
which fposval.h.def was not correct.
Fixed how have_memmv.h is built. On a number of systems, the have_memmv.c
file failed to compile incorrectly, producing a potentially incorrect
have_memmv.h file for such systems.
Fixed how align32.h is built. On a number of systems, the align32.c
file failed to compile incorrectly, producing a potentially incorrect
align32.h file for such systems.
Fixed how have_newstr.h is built. On a number of systems, the have_newstr.c
failed to compile incorrectly, producing a potentially incorrect
have_newstr.h file for such systems.
Fixed how have_strdup.h is built. On a number of systems, the have_strdup.c
file failed to compile incorrectly, producing a potentially incorrect
have_strdup.h file for such systems.
Fixed how have_strlcat.h is built. On a number of systems, the have_strlcat.c
file failed to compile incorrectly, producing a potentially incorrect
have_strlcat.h file for such systems.
Fixed how have_strlcpy.h is built. On a number of systems, the have_strlcpy.c
file failed to compile incorrectly, producing a potentially incorrect
have_strlcpy.h file for such systems.
Fixed how have_uid_t.h is built. On a number of systems, the have_uid_t.c
file failed to compile incorrectly, producing a potentially incorrect
have_uid_t.h file for such systems.
Fixed how have_uid_t.h is built. On a number of systems, the have_uid_t.c
file failed to compile incorrectly, producing a potentially incorrect
have_uid_t.h file for such systems.
Added a few remarks on calc version numbers to version.c.
Fixed how fposval.h is built. On a number of systems, the fposval.c
file failed to compile incorrectly. This caused problems for systems in
which fposval.h.def was not correct.
Fixed how have_memmv.h is built. On a number of systems, the have_memmv.c
file failed to compile incorrectly, producing a potentially incorrect
have_memmv.h file for such systems.
Fixed how align32.h is built. On a number of systems, the align32.c
file failed to compile incorrectly, producing a potentially incorrect
align32.h file for such systems.
Fixed how have_newstr.h is built. On a number of systems, the have_newstr.c
failed to compile incorrectly, producing a potentially incorrect
have_newstr.h file for such systems.
Fixed how have_strdup.h is built. On a number of systems, the have_strdup.c
file failed to compile incorrectly, producing a potentially incorrect
have_strdup.h file for such systems.
Fixed how have_strlcat.h is built. On a number of systems, the have_strlcat.c
file failed to compile incorrectly, producing a potentially incorrect
have_strlcat.h file for such systems.
Fixed how have_strlcpy.h is built. On a number of systems, the have_strlcpy.c
file failed to compile incorrectly, producing a potentially incorrect
have_strlcpy.h file for such systems.
Fixed how have_uid_t.h is built. On a number of systems, the have_uid_t.c
file failed to compile incorrectly, producing a potentially incorrect
have_uid_t.h file for such systems.
Fixed how have_uid_t.h is built. On a number of systems, the have_uid_t.c
file failed to compile incorrectly, producing a potentially incorrect
have_uid_t.h file for such systems.
Fixed a \-escape bug in calc(1) man page.
Added cal/comma.cal:
Convert numbers into strings with 3-digit group and integer-fraction
separators.
If the value is an integer, the integer-fraction separator is not used.
str_comma(x, [group, [decimal]])
Convert x into a string.
If group is given and is a string, group will be used as
the 3-digit group separator, otherwise the default 3-digit
group separator will be used.
If decimal is given and is a string, group will be used as
the integer-fraction separator, otherwise the default
integer-fraction separator will be used.
The decimal and group arguments are optional.
set_default_group_separator(group)
Change the default 3-digit group separator if group is a string,
otherwise the default 3-digit group separator will not be
changed. Return the old 3-digit group separator.
set_default_decimal_separator(decimal)
Change the default 3-digit group separator if decimal is a
string, otherwise the default integer-fraction separator
will not be changed. Return the old integer-fraction separator.
print_comma(x, [group, [decimal]])
Print the value produced by str_comma(x, [group, [decimal]])
followed by a newline.
If the str_comma() does not return a string, nothing is printed.
The decimal and group arguments are optional.
The value produced by str_comma() is returned.
fprint_comma(fd, x, [group, [decimal]])
Print the value produced by str_comma(x, [group, [decimal]]),
without a trailing newline, on file fd.
If the str_comma() does not return a string, nothing is printed.
If fd is not an open file, nothing is printed.
The decimal and group arguments are optional.
The value produced by str_comma() is returned.
The following are the changes from calc version 2.14.1.0 to date:
Fixed alignment of show item section of help command.
Bug fix: While 0^0 == 1, now for y > 0, 0^y == 0.
Adjusted cal/test8900.cal to reflect this bug fix.
Added tests to cal/regress.cal to help verify bug fix is fixed.
While 0^0 == 1, now for y > 0, 0^y == 0.
Adjusted cal/test8900.cal to reflect the this bug fix.
Added tests to cal/regress.cal to help verify bug fix is fixed.
Changed /*NOTREACHED*/ to not_reached(); and use "attribute.h".
Added .PHONY rule, just after all rule, to Makefiles.
Fixed an improper indentation issue.
Expanded the globalsymbol string table size: from 1024 to 65536.
Expanded the how often to reallocate string table is performed:
from 100 to 1024.
Expanded the number env_pool elements to allocate at a time:
from 10 to 256.
Improve comments on Makefile.local and add a few more examples
of how it might be used.
Changed Makefile to set shell before setting the SHELL Makefile
variable.
Added text to HOWTO.INSTALL to help people with systems that
lack the readline package.
Trimmed long line in the CONTRIBUTING.md file.
The following are the changes in this release:
Fixed typo in Makefile.local comment.
Established a tagging procedure for a production release.
Production git tags will be of the form:
prod-2.x.y.z
We apologize for the calc v2.14.0.12 source tarball that was missing
critical files. While the executable was well tested, our release
process was deficient.
We are improved our release process and added tests during the release
procedure to help verify that we are not regressing in to the
"v2.14.0.12 source tarball" issue, among other things.
Depending on how things do, you might is several releases come out over
a short period of time. The core of calc isn't changing, so the calc
executable will be the same as we focus on the Makefiles, our release
procedure, and related documentation / help files.
Removed constructed help file that incorrectly added as a src file.
=-=
The following are the changes in this release:
Made major changes to our release process in order to avoid
missing critical files that happened in calc v2.4.0.12.
Minor tweak to seed() builtin. Updated help/srand and help/srandom.
Moved Makefile.ship into Makefile.
Removed custom/Makefile.head and custom/Makefile.tail.
The custom/Makefile is now part of source and includes Makefile.
In particular, custom/Makefile makes use of the 'middle' of
the new top level Makefile where calc's top level Makefile
variables are defined.
Makefile.simple and custom/Makefile.simple are now part of the source
and are constructed from Makefile and custom/Makefile respectively.
The Makefile.simple and custom/Makefile.simple avoid using GNU
conditionals. They may be used with older/classic make commands.
Makefile.local will include comments about how to better use
it. Between releases, Makefile.local at the top of the master branch
will contain how we typically build calc and test calc (FYI: we
normally enable things such as -Werror -Wextra -pedantic). When we
push out a release, Makefile.local will be stripped of non-comment
lines. Thus, releases of calc, and, released "calc*.src.rpm"
files and the source tarballs, will have a Makefile.local with
only comments.
The "README.*" files and "HOWTO.INSTALL" file have been updated.
By default, compiler warnings have been turned up. The Makefile
variable ${CCWARN} now defaults to:
CCWARN= -Wall -Wextra -pedantic
The previous level of compiler warnings can be easily restored by
adding to Makefile.local:
CCWARN:= -Wall
The readline, history and ncurses libraries are now default.
The Makefile variables ${USE_READLINE}, ${READLINE_LIB}, and
${READLINE_EXTRAS} now default to:
USE_READLINE= -DUSE_READLINE
READLINE_LIB= -lreadline
READLINE_EXTRAS= -lhistory -lncurses
The previous mode where readline, history and ncurses libraries
were not compiled in by default can be easily restored by
adding to Makefile.local:
USE_READLINE:=
READLINE_LIB:=
READLINE_EXTRAS:=
We have renamed "stable" as "production".
We have renamed "unstable" as "tested".
On the web site:
http://www.isthe.com/chongo/src/calc/
these files has been renamed:
2.x.y.z_IS_LATEST_STABLE ==> 2.x.y.z_IS_LATEST_PRODUCTION
2.x.y.z_IS_LATEST_UNSTABLE ==> 2.x.y.z_IS_LATEST_TESTED
The terms 'stable' and 'unstable' were both misleading and
inaccurate. For details see the new documention file:
README.RELEASE
See also the help command:
; help release
Fixed bug impacting how have_ustat.h was formed.
Updated help/archive, BUGS, HOWTO.INSTALL to reflect GitHub use.
We apologize for the calc v2.14.0.12 source tarball that was missing
critical files. While the executable was well tested, our release
process was deficient.
We are improved our release process and added tests during the release
procedure to help verify that we are not regressing in to the "v2.14.0.12
source tarball" issue, among other things.
Depending on how things do, you might is several releases come out over
a short period of time. The core of calc isn't changing, so the calc
executable will be the same as we focus on the Makefiles, our release
procedure, and related documentation / help files.
Removed constructed help file that incorrectly added as a src file.
=-=
The following are the changes in this release:
Minor tweak to seed() builtin. Updated help/srand and help/srandom.
Moved Makefile.ship into Makefile.
Removed custom/Makefile.head and custom/Makefile.tail.
The custom/Makefile is now part of source and includes Makefile.
In particular, custom/Makefile makes use of the 'middle' of
the new top level Makefile where calc's top level Makefile
variables are defined.
Makefile.simple and custom/Makefile.simple are now part of the source
and are constructed from Makefile and custom/Makefile respectively.
The Makefile.simple and custom/Makefile.simple avoid using GNU
conditionals. They may be used with older/classic make commands.
Makefile.local will include comments about how to better use
it. Between releases, Makefile.local at the top of the master branch
will contain how we typically build calc and test calc (FYI: we
normally enable things such as -Werror -Wextra -pedantic). When we
push out a release, Makefile.local will be stripped of non-comment
lines. Thus, releases of calc, and, released "calc*.src.rpm"
files and the source tarballs, will have a Makefile.local with
only comments.
The "README.*" files and "HOWTO.INSTALL" file have been updated.
By default, compiler warnings have been turned up. The Makefile
variable ${CCWARN} now defaults to:
CCWARN= -Wall -Wextra -pedantic
The previous level of compiler warnings can be easily restored by
adding to Makefile.local:
CCWARN:= -Wall
The readline, history and ncurses libraries are now default.
The Makefile variables ${USE_READLINE}, ${READLINE_LIB}, and
${READLINE_EXTRAS} now default to:
USE_READLINE= -DUSE_READLINE
READLINE_LIB= -lreadline
READLINE_EXTRAS= -lhistory -lncurses
The previous mode where readline, history and ncurses libraries
were not compiled in by default can be easily restored by
adding to Makefile.local:
USE_READLINE:=
READLINE_LIB:=
READLINE_EXTRAS:=
We have renamed "stable" as "production".
We have renamed "unstable" as "tested".
On the web site:
http://www.isthe.com/chongo/src/calc/
these files has been renamed:
2.x.y.z_IS_LATEST_STABLE ==> 2.x.y.z_IS_LATEST_PRODUCTION
2.x.y.z_IS_LATEST_UNSTABLE ==> 2.x.y.z_IS_LATEST_TESTED
The terms 'stable' and 'unstable' were both misleading and
inaccurate. For details see the new documention file:
README.RELEASE
See also the help command:
; help release
Fixed bug impacting how have_ustat.h was formed.
Updated help/archive to reflect GitHub use.
We apologize for the calc v2.14.0.12 source tarball that was missing
critical files. While the executable was well tested, our release
process was deficient.
We are improved our release process and added tests during the release
procedure to help verify that we are not regressing in to the "v2.14.0.12
source tarball" issue, among other things.
Depending on how things do, you might is several releases come out over
a short period of time. The core of calc isn't changing, so the calc
executable will be the same as we focus on the Makefiles, our release
procedure, and related documentation / help files.
=-=
The following are the changes in this release:
Minor tweak to seed() builtin. Updated help/srand and help/srandom.
Moved Makefile.ship into Makefile.
Removed custom/Makefile.head and custom/Makefile.tail.
The custom/Makefile is now part of source and includes Makefile.
In particular, custom/Makefile makes use of the 'middle' of
the new top level Makefile where calc's top level Makefile
variables are defined.
Makefile.simple and custom/Makefile.simple are now part of the source
and are constructed from Makefile and custom/Makefile respectively.
The Makefile.simple and custom/Makefile.simple avoid using GNU
conditionals. They may be used with older/classic make commands.
Makefile.local will include comments about how to better use
it. Between releases, Makefile.local at the top of the master branch
will contain how we typically build calc and test calc (FYI: we
normally enable things such as -Werror -Wextra -pedantic). When we
push out a release, Makefile.local will be stripped of non-comment
lines. Thus, releases of calc, and, released "calc*.src.rpm"
files and the source tarballs, will have a Makefile.local with
only comments.
The "README.*" files and "HOWTO.INSTALL" file have been updated.
By default, compiler warnings have been turned up. The Makefile
variable ${CCWARN} now defaults to:
CCWARN= -Wall -Wextra -pedantic
The previous level of compiler warnings can be easily restored by
adding to Makefile.local:
CCWARN:= -Wall
The readline, history and ncurses libraries are now default.
The Makefile variables ${USE_READLINE}, ${READLINE_LIB}, and
${READLINE_EXTRAS} now default to:
USE_READLINE= -DUSE_READLINE
READLINE_LIB= -lreadline
READLINE_EXTRAS= -lhistory -lncurses
The previous mode where readline, history and ncurses libraries
were not compiled in by default can be easily restored by
adding to Makefile.local:
USE_READLINE:=
READLINE_LIB:=
READLINE_EXTRAS:=
We have renamed "stable" as "production".
We have renamed "unstable" as "tested".
On the web site:
http://www.isthe.com/chongo/src/calc/
these files has been renamed:
2.x.y.z_IS_LATEST_STABLE ==> 2.x.y.z_IS_LATEST_PRODUCTION
2.x.y.z_IS_LATEST_UNSTABLE ==> 2.x.y.z_IS_LATEST_TESTED
The terms 'stable' and 'unstable' were both misleading and
inaccurate. For details see the new documention file:
README.RELEASE
See also the help command:
; help release
Fixed bug impacting how have_ustat.h was formed.
Updated help/archive to reflect GitHub use.
